|
PLEASE READ IMPORTANT INFORMATION UNDER THE INFO TAB ABOVE INCLUDING ALL SHIPPING INFORMATION PRIOR TO BIDDING. |
|
HAAS VF-OE 20 HP Vector Drive CNC Lot #1 (Sale Order 1 of 60) Mfg Date 10-97, SN:12041, quick code programming, RS 232 port, 20 place tool changer, 10,000 rpm spindle, belt drive, programmable coolant, ridged tap, chip auger, memory upgrade, 30"X, 16"Y, 20"Z, feed cutting time 2,178 hrs, power on time 15,645 hrs.
|
|
|
HAAS VF-2 20 HP Vector Drive CNC Lot #2 (Sale Order 2 of 60) Mfg Date 04-98, SN:14499, quick code programming, RS 232 port, 20 place tool changer, 7,500 rpm spindle, gear drive (low/high), programmable coolant, ridged tap, chip auger, memory upgrade, 30"X, 16"Y, 20"Z, 3 years on thrust bearings in screws, feed cutting time 3,230 hrs, power on time 20,569 hrs.
|
|
|
Sharp 1440F Lathe with Acu-Rite Digital Read Out Lot #3 (Sale Order 3 of 60) SN:23705, 3 phase/220volt, 1 3/8" spindle, 3 jaw chuck, coolant pump.
|
|
|
Brown & Sharpe 818 Micromaster Surface Grinder Lot #4 (Sale Order 4 of 60) 8" X 18" SN:523-8182-6521 3 phase, w/Electrical Neutrofier remote control model 4RC6A, Hydraulic X & Y, Manual Z, with coolant tank
|
|
|
Chevalier FSG-618M 6 x 18 Surface Grinder with Digital Read Out Lot #5 (Sale Order 5 of 60) Manual w/magnetic chuck, sn:A3847020, spindle mounted wheel dresser, with coolant tank, approx 30 hours on spindle, mid 1990s
|
|
|
Ellis 90 76" X 12" Portable Horizontal Metal Band Saw Lot #6 (Sale Order 6 of 60) SN:784-830, Cap cuts to 9.5" wide @ 90 degrees, 6.5" wide @ 45 degrees - 7 deep. 110 volt
|
|
|
Sodick EPOC-3 Model FS-A 3C Sinker-EDM CNC Lot #7 (Sale Order 7 of 60) #SA3C-2148, MFG 1986, 8 place tool changer, w/Mark XI EDM Controller, 50 amp, 3 phase, 19" x 29" tank, set up for 3R tooling, 8"Y, 12"X.
|
|
|
3R Tooling Pucks Lot #8 (Sale Order 8 of 60) 9 count
|
|
|
3R Control Ruler Lot #9 (Sale Order 9 of 60) 606.1
|
|
|
3R Test Blocks Lot #10 (Sale Order 10 of 60) 656.1 - 653
|
|
|
20mm Shank Electrode Holders (8) & 20mm Test Bar Lot #11 (Sale Order 11 of 60) |
|
|
Gage Pin Set Model M-2 Lot #12 (Sale Order 12 of 60) .501-.625 minus (13 missing)
|
|
|
Gage Pin Set Model M-4 Lot #13 (Sale Order 13 of 60) .625-.750 minus (13 missing)
|
|
|
Gage Pin Set Model M-2 Lot #14 (Sale Order 14 of 60) .251-.500 minus
|
|
|
Gage Pin Set Model M-0 Lot #15 (Sale Order 15 of 60) .01-.060 minus (1 missing)
|
|
|
Gage Pin Set Model M-1 Lot #16 (Sale Order 16 of 60) .061-.250 (2 missing)
|
|
|
Angle Gage Set Lot #17 (Sale Order 17 of 60) 1 degree to 30 degrees
|
|
|
Tapping Head with group of Tap Holders Lot #18 (Sale Order 18 of 60) 2 boxes
|
|
|
3 Angle Plates Lot #19 (Sale Order 19 of 60) 1 is 8 X 9 X12
|
|
|
Sunnen Model PG-400-S Gage Setting Fixture Lot #20 (Sale Order 20 of 60) |
|
|
Brunswick Dial Sink Lot #21 (Sale Order 21 of 60) |
|
|
ER 20 Cat 40 Taper with 9 Collets Lot #22 (Sale Order 22 of 60) |
|
|
ER 20 Cat 40 Tapers (4) with 50 Collets Lot #23 (Sale Order 23 of 60) |
|
|
2 Door 4 Shelf Metal Cabinet Lot #24 (Sale Order 24 of 60) 36" X 72" X 18" deep
|
|
|
Fraction & Wire gage Drill Cabinets Lot #25 (Sale Order 25 of 60) w/ remaining inventory (less than 10%0
|
|
|
Dust-Pak By Airflow, Inc. Cartridge Collector Lot #26 (Sale Order 26 of 60) Model # PC02-LTK_PG7, SN:24601, MFG 1995, w/arm
|
|
|
TORIT Cartridge Collector Model G4 Lot #27 (Sale Order 27 of 60) 3/4 HP sn: 221114
|
|
|
Group of 34 CAT 40 Tapers Lot #28 (Sale Order 28 of 60) all with retention knobs for HAAS CNC, including Lyndex, Parlec & others, covers, counter bores, drills, tooling with holder.
|
|
|
Kurt 6" Machine Vise Lot #29 (Sale Order 29 of 60) D675-132032
|
|
|
Sharp Series I Vertical Mill (new in 2002) Lot #30 (Sale Order 30 of 60) with Acu-Rite Digital Read Out, power feed, sn#70825110, 9" X 42" table
|
|
|
Gage Block Set Lot #31 (Sale Order 31 of 60) .050 to 4"
|
|
|
Kurt 6" Machine Vise Lot #32 (Sale Order 32 of 60) D688-11342
|
|
|
Kurt 6" Machine Vise Lot #33 (Sale Order 33 of 60) 6688-11329
|
|
|
Kurt 6" Machine Vise Lot #34 (Sale Order 34 of 60) 3600V 015068
|
|
|
Kurt 6" Machine Vise Lot #35 (Sale Order 35 of 60) 3600V
|
|
|
Approximately 50 pieces misc tooling Lot #36 (Sale Order 36 of 60) reamers, long drill, end mills, taps, KenA metal tooling,
|
|
|
Mitutoio 15X tool makers microscope, Type TM-111 Lot #37 (Sale Order 37 of 60) s# 10845
|
|
|
72" X 32" metal frame 1 1/5" maple top work bench Lot #38 (Sale Order 38 of 60) with 2 stools
|
|
|
3" X 12" X 18" & 6" X 6" granite surface plate Lot #39 (Sale Order 39 of 60) 6 X 6 w/ dial plunger indicator
|
|
|
24" X 47" X 38" metal work bench with tool vise Lot #40 (Sale Order 40 of 60) |
|
|
bench top arbor press Lot #41 (Sale Order 41 of 60) |
|
|
Blue Point shop cart w/ group of 1/2" T-Slot Clamps Lot #42 (Sale Order 42 of 60) over 200 pieces
|
|
|
Group of Veneer height gage, V block indicator holder Lot #43 (Sale Order 43 of 60) 5C grinding collets, set of stamps
|
|
|
Uline pneumatic box stapler model H-1030 Lot #44 (Sale Order 44 of 60) |
|
|
Group of polishing & abrasive supplies Lot #45 (Sale Order 45 of 60) |
|
|
Granite Surface Plate on stand Lot #46 (Sale Order 46 of 60) 24 X 36 X 6" thick
|
|
|
Group of drill bits, hardware, inserted cutters, Lot #47 (Sale Order 47 of 60) most used
|
|
|
2 Poly Snap-on Parts Cabinets Lot #48 (Sale Order 48 of 60) end mills, taps, reamers, drills
|
|
|
24 X 72 metal workbench w/ 24" right hand return Lot #49 (Sale Order 49 of 60) |
|
|
Heavy Duty cord w/ quad outlet & 2 wheel cart Lot #50 (Sale Order 50 of 60) |
|
|
Fastenal Cabinet w/ remaining hardware Lot #51 (Sale Order 51 of 60) most are 10/32 to 1/2 socket head cap screws, bolts, misc
|
|
|
R8 collets from 1/8 to 3/4 & misc chucks Lot #52 (Sale Order 52 of 60) |
|
|
10 drawer tool cabinet on stand Lot #53 (Sale Order 53 of 60) with 1/8 parallels, ejector pins, graphite, vise
|
|
|
group of inspection equipment Lot #54 (Sale Order 54 of 60) 5" sign bar, bore indicator, Scheer Tumico dial indicator, SPI dial indicator (not working)
|
|
|
72 compartment hardware bin w/ remaining inventory Lot #55 (Sale Order 55 of 60) socket head cap screws, bolts, nuts, water fittings
|
|
|
2 work station 3 X 4 floor mats Lot #56 (Sale Order 56 of 60) |
|
|
4 drawer horizontal file w/ misc parts books Lot #57 (Sale Order 57 of 60) |
|
|
4 drawer file cabinet (black) Lot #58 (Sale Order 58 of 60) |
|
|
office group Lot #59 (Sale Order 59 of 60) 2 desks, 4 self bookcase, chair
|
|
|
12FT workbench w/ Formica top on wheels Lot #60 (Sale Order 60 of 60) |
|