Adam Marshall's Machinery & Equipment Auction

Tuesday, April 1, 2014 | 11:00 AM Central

Auction closed.

Adam Marshall's Machinery & Equipment Auction

Tuesday, April 1, 2014 | 11:00 AM Central

Auction closed.

Internet Premium: 3%
Instant Financing | Low PaymentsSee Special Terms for additional fees

Holdrege, NE

Description

Held at the Phelps County Fairgrounds, Holdrege, NE. Quality machinery and equipment sold at Absolute Auction.

Adam Marshall Land & Auction

3084554410

Internet Premium: 3%
Sales Tax : 7% - Sales tax applied to Hammer Price.
Payment Options: Check and Wire Transfer
Payment Instructions: Adam Marshall Auctioneers will contact you about your purchase and payment within 24 hours of the end of the auction. You will be invoiced the day of the auction. If paying by check, it must be postmarked next day. All checks over $10,000 need to have a bank letter of approval. If paying by wire transfer, Adam Marshall Auctioneers will give you wiring instructions within 24 hours of the end of the sale. $10 wire fee
Currency Type: USD
Shipping Instructions: Buyer is responsible for all shipping logistics and costs.
Preview Date & Times: Up to one week before the auction at the Phelps County Fairgrounds in Holdrege, NE.
Checkout Date & Times: Check out is from April 1st through April 8th, 9 AM to 5 PM through Friday. By appointment after Friday. Loader available till April 8th.
Location: 1308 2nd St., Holdrege, NE 68949
Driving Directions: Located at 1308 2nd St., Holdrege, NE. The Phelps County Fairgrounds is located on the east end of town, just south of the railroad tracks. Use 4th Ave railroad crossing for tall loads.

Special Terms

Live auction begins at 10 AM. Catalog and internet items to begin at approximately 11 AM. All items need to be removed by April 8th, 2014. Loader available up to April 8th. Items left after April 8th are charged $50 rental fee to be paid to the Phelps County. Fairgrounds. All property is sold "AS-IS WHERE-IS", no warranties expressed or implied, and absolutely no refunds or returns. The property is open to inspection up to one week before the auction. It is the bidder's responsibility to use their own judgment on the quality and condition of the item. Adam Marshall Auctioneers does not guarantee descriptions although they are made in good-faith. Bidder's that are off-site understand that they might not have an equal opportunity to inspect an item as well as if they were at the physical auction site. Bidder understands that internet auction service provided may not work properly on auction day and agrees that under no circumstance will they have any claim against Adam Marshall Auctioneers or anyone else if the internet bidding fails to work. We try to give the internet an equal opportunity to bid as the bidders at the auction, but we will not be responsible for any missed bids.

Search Catalog :

Sort By :

Go to Lot :

Go to Page :

Per Page :

Pg : 2 of 3

Stout Regular Weld-on Skid Steer plate

Lot # 23 (Sale Order: 26 of 70)

Stout Solid Weld-on Skid Steer plate

Stout Brush Grapple HDU72 w/ skid steer quick attach

Lot # 24 (Sale Order: 27 of 70)

Stout Brush Grapple HDU72 w/ skid steer quick attach

Stout Rock Bucket Grapple HD72 w/ skid steer quick attach

Lot # 25 (Sale Order: 28 of 70)

Stout Rock Bucket Grapple HD72 w/ skid steer quick attach

Stout Full-Back Pallet Forks 48 in. w/ skid steer quick attach

Lot # 26 (Sale Order: 29 of 70)

Stout Full-Back Pallet Forks 48 in. w/ skid steer quick attach

Stout Walk-Through Pallet Forks 48 in. w/ skid steer quick attach

Lot # 27 (Sale Order: 30 of 70)

Stout Walk-Through Pallet Forks 48 in. w/ skid steer quick attach

Quantity: 10

10 - 12 x 5 ft. portable corral panels, new, sold 10 x bid

$60.00 x 10 = $600.00 Total

New silage/hay wagon w/ saver guard, 24ft., single axle

Lot # 40A (Sale Order: 44 of 70)

New silage/hay wagon w/ saver guard, 24ft., single axle

New silage/hay wagon, 24ft., single axle

Lot # 40B (Sale Order: 45 of 70)

New silage/hay wagon, 24ft., single axle

12 × 24 ft. calf shed, 5 inch skids, nice tin, bottom wind guard, tie down

Lot # 41 (Sale Order: 46 of 70)

12 × 24 ft. calf shed, 5 inch skids, nice tin, bottom wind guard, tie down brackets

Mayrath 10×71 ft. auger w/ low profile swing hopper, hyd. lift, manual, pt

Lot # 42 (Sale Order: 47 of 70)

Mayrath 10×71 ft. auger w/ low profile swing hopper, hyd. lift, manual, pto, barely used

New 8 bale wagon, single axle wheels

Lot # 42A (Sale Order: 48 of 70)

New 8 bale wagon, single axle wheels

JD 480-80R42 combine duals, used 2 years, like new, spacers for 670 & 9770

Lot # 43 (Sale Order: 49 of 70)

JD 480-80R42 combine duals, used 2 years, like new, spacers for 670 & 9770 series combines, ladder ext., axle rods

Ford 8600 w/ Du-Al 3100 loader/grapple, runs & starts well, cab, shows 4,14

Lot # 44 (Sale Order: 50 of 70)

Ford 8600 w/ Du-Al 3100 loader/grapple, runs & starts well, cab, shows 4,147 hrs., 3 pt. quick hitch, 540 pto, 2WD, 2 hyd., good Agri-Power 18.4-38 tires, tire chains included, frt. wts. & bracket,tractor SN 0511547, fresh oil change, new battery, full of fuel, loader SN 5904

Search Catalog :

Sort By :

Go to Lot :

Go to Page :

Per Page :

Pg : 2 of 3

1.178.0.761.2502f97.10.145

Bid Range	Increment
$0.01 - $0.24	$0.01
$0.25 - $0.49	$0.05
$0.50 - $0.99	$0.10
$1.00 - $4.99	$0.25
$5.00 - $9.99	$0.50
$10.00 - $24.99	$1.00
$25.00 - $99.99	$5.00
$100.00 - $249.99	$10.00
$250.00 - $499.99	$25.00
$500.00 - $999.99	$50.00
$1,000.00 - $4,999.99	$100.00
$5,000.00 - $24,999.99	$250.00
$25,000.00 - $49,999.99	$500.00
$50,000.00 - $99,999.99	$1,000.00
$100,000.00 - $249,999.99	$2,500.00
$250,000.00 - $999,999.99	$5,000.00
$1,000,000.00+	$10,000.00

Category

Selling Format

Adam Marshall's Machinery & Equipment Auction

Adam Marshall's Machinery & Equipment Auction

Stout Regular Weld-on Skid Steer plate

Stout Brush Grapple HDU72 w/ skid steer quick attach

Stout Rock Bucket Grapple HD72 w/ skid steer quick attach

Stout Full-Back Pallet Forks 48 in. w/ skid steer quick attach

Stout Walk-Through Pallet Forks 48 in. w/ skid steer quick attach

Stout Pallet Forks 48 in. w/ skid steer quick attach

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 20 ft. continuous fence panels, 6 bar w/ brackets, new, sold 10 x bid

10 - 12 x 5 ft. portable corral panels, new, sold 10 x bid

10 - 12 x 5 ft. portable corral panels, new, sold 10 x bid

10 - 12 x 5 ft. portable corral panels, new, sold 10 x bid

10 - 12 x 5 ft. portable corral panels, new, sold 10 x bid

New silage/hay wagon w/ saver guard, 24ft., single axle

New silage/hay wagon, 24ft., single axle

12 × 24 ft. calf shed, 5 inch skids, nice tin, bottom wind guard, tie down

Mayrath 10×71 ft. auger w/ low profile swing hopper, hyd. lift, manual, pt

New 8 bale wagon, single axle wheels

JD 480-80R42 combine duals, used 2 years, like new, spacers for 670 & 9770

Ford 8600 w/ Du-Al 3100 loader/grapple, runs & starts well, cab, shows 4,14