Amoskeag Auction Company, Inc. » Auction No. 130 Featuring Fine Collectible Arms
Auction No. 130 Featuring Fine Collectible Arms

Auction No. 130 Featuring Fine Collectible Arms

Saturday, June 5, 2021  |  9:00 AM Eastern
Auction closed.
Auction No. 130 Featuring Fine Collectible Arms

Auction No. 130 Featuring Fine Collectible Arms

Saturday, June 5, 2021  |  9:00 AM Eastern
Auction closed.
Internet Premium: 20.5%
See Special Terms for additional fees
Cash Payment Discount: 2.5%
Manchester, NH
 
Share:

Description

This sale by Amoskeag Auction Company features over 750 lots of rare and historic firearms. View the entire catalog here.

Amoskeag Auction Company, Inc.

(603) 627-7383
Catalog Terms of sale
Search Catalog :
Search
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 3 of 32

Pennsylvania Percussion Double Rifle by Roth

Pennsylvania Percussion Double Rifle by Roth

Lot # 51 (Sale Order: 51 of 788)      

Low Estimate: 1,800High Estimate: 2,200
About 52 cal, now smoothbore, 31 1/4” octagon barrels with oxidized bores. The barrels are an overall pleasing plum brown patina with some scattered light oxidation and some areas of light pitting nearer the breeches. There are the expected light handling marks here and there that come from the years and there is a simple brass blade front sight with a flat-top rear (slightly loose on the rib). The breeches show dual inlaid silver bands with breech plugs and tang toned to a plum brown patina. The back action locks and hammers are a similar pleasing smooth plum tone and are unadorned, each lockplate maker marked “Chas Roth”, additionally the left lockplate shows a number of small shallow screw holes and a protruding stud, which may have been where some manner of bridge style aperture sight was once fitted. German silver furniture includes nosecap, wedge escutcheons, large bow triggerguard and semi-fancy toeplate with simple crescent buttplate. The triggerguard front extension is lightly chiseled, there is a semi-ornate pendulum style patchbox and a running deer inlay, in German silver, on the left side flared shadowline cheekpiece. The stock itself rates very fine with much original varnish and the expected light dings and handling marks from the years with a bit of added finish which has slightly filled the nice checkering at the grip area. Each of the lockplates show a few small chips around them, the right lock seems to function properly and hold well, the left lock needing a bit of mechanical attention. Beneath the patchbox we find a worm for the ramrod, what is likely the original ramrod is present. Charles Roth was active in Wilkes-Barre Pennsylvania from around 1842 1887. (3B10088-10) {ANTIQUE} (1800/2200)
About 52 cal, now smoothbore, 31 1/4” octagon barrels with oxidized bores. The barrels are an overall pleasing plum brown patina with some scattered light oxidation and s...moreome areas of light pitting nearer the breeches. There are the expected light handling marks here and there that come from the years and there is a simple brass blade front sight with a flat-top rear (slightly loose on the rib). The breeches show dual inlaid silver bands with breech plugs and tang toned to a plum brown patina. The back action locks and hammers are a similar pleasing smooth plum tone and are unadorned, each lockplate maker marked “Chas Roth”, additionally the left lockplate shows a number of small shallow screw holes and a protruding stud, which may have been where some manner of bridge style aperture sight was once fitted. German silver furniture includes nosecap, wedge escutcheons, large bow triggerguard and semi-fancy toeplate with simple crescent buttplate. The triggerguard front extension is lightly chiseled, there is a semi-ornate pendulum style patchbox and a running deer inlay, in German silver, on the left side flared shadowline cheekpiece. The stock itself rates very fine with much original varnish and the expected light dings and handling marks from the years with a bit of added finish which has slightly filled the nice checkering at the grip area. Each of the lockplates show a few small chips around them, the right lock seems to function properly and hold well, the left lock needing a bit of mechanical attention. Beneath the patchbox we find a worm for the ramrod, what is likely the original ramrod is present. Charles Roth was active in Wilkes-Barre Pennsylvania from around 1842 1887. (3B10088-10) {ANTIQUE} (1800/2200)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Germanic Club Butt Flintlock Stalking Rifle

Germanic Club Butt Flintlock Stalking Rifle

Lot # 52 (Sale Order: 52 of 788)      

Low Estimate: 2,000High Estimate: 3,000
About 58 cal, 39 1/2” octagon barrel with an oxidized bore. This is an interesting and early flintlock rifle, the barrel an overall plum brown patina with oxidation freckles and pewter undertones, with scattered spots of light pitting. It shows a simple scant brass blade front sight and flat top v-notch rear and is otherwise unmarked but for two touch marks at the rear of top flat which are no longer legible. The banana-shaped lock has a pronounced teat at rear, faceted pan and unbridled frizzen with the tail of the common spring lightly chiseled. There is a rather large Jaeger-style long triggerguard with single rearward spur and dovetailed extension, along with a very wide five-faceted brass buttplate, the only other brass hardware being two lock screw escutcheons. The stock features thin carved ribs the full-length of the barrel channel and flanking the faux carved ramrod with raised open scroll surrounding where ramrod tailpipe would have been (it has gone missing) and there is similar scroll embellishment around each stock flat and the rifle’s tang. The stock itself rates very fine and it appears unmolested with the expected dings and handling marks and with good original varnish. It is a very dark walnut but may indeed be mahogany, with a rich red-russet character. Left side of butt has a wide flared cheekpiece with extensive foliate carving at its rear and a bit more at its nose, both grip area and forestock widely skip-line checkered. The arm is equipped with double set triggers which appear to need a bit of mechanical attention and the lock will only hold on half cock. A handsome early rifle, clearly made for some monied person who would have a loader with them, hence the faux ramrod on the underside of the stock. (3B10088-11) {ANTIQUE} (2000/3000)
About 58 cal, 39 1/2” octagon barrel with an oxidized bore. This is an interesting and early flintlock rifle, the barrel an overall plum brown patina with oxidation freck...moreles and pewter undertones, with scattered spots of light pitting. It shows a simple scant brass blade front sight and flat top v-notch rear and is otherwise unmarked but for two touch marks at the rear of top flat which are no longer legible. The banana-shaped lock has a pronounced teat at rear, faceted pan and unbridled frizzen with the tail of the common spring lightly chiseled. There is a rather large Jaeger-style long triggerguard with single rearward spur and dovetailed extension, along with a very wide five-faceted brass buttplate, the only other brass hardware being two lock screw escutcheons. The stock features thin carved ribs the full-length of the barrel channel and flanking the faux carved ramrod with raised open scroll surrounding where ramrod tailpipe would have been (it has gone missing) and there is similar scroll embellishment around each stock flat and the rifle’s tang. The stock itself rates very fine and it appears unmolested with the expected dings and handling marks and with good original varnish. It is a very dark walnut but may indeed be mahogany, with a rich red-russet character. Left side of butt has a wide flared cheekpiece with extensive foliate carving at its rear and a bit more at its nose, both grip area and forestock widely skip-line checkered. The arm is equipped with double set triggers which appear to need a bit of mechanical attention and the lock will only hold on half cock. A handsome early rifle, clearly made for some monied person who would have a loader with them, hence the faux ramrod on the underside of the stock. (3B10088-11) {ANTIQUE} (2000/3000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

European Double Flintlock Fowler by Lhoest

European Double Flintlock Fowler by Lhoest

Lot # 53 (Sale Order: 53 of 788)      

Low Estimate: 1,500High Estimate: 2,000
About 20 ga., 34” part octagon part round barrels with turned medials at the point of transition showing oxidized bores. The barrels are an overall tarnished pewter patina with overall smatterings of darker brown oxidation staining, showing perhaps the widely scattered pit here and there. There is a simple silver bladed front sight showing the damascened remnants of a gold-washed sunburst with additional lightly engraved floral decoration near the breech, also showing light gold wash damascening along with “canon tordu” also in light gold wash signifying a high-quality damascus twist barrel. Both lockplates are slightly convex with a rear teat, they are unadorned and feature simple bridled frizzens with makers name “T. Lhoest” on right lock, “& Freres” on left. There is a slightly fancy brass tailpipe and a heavy brass buttplate with lightly pierced and chiseled tang. The European walnut buttstock is a very generous, early Jaeger-style, and features carved walnut triggerguard with single grip flourish. The stock itself shows some very ornate open foliate scroll carving at right rear of the wrist, surrounding tang and flanking the nice square-bottom left side cheekpiece. The forend shows a number of length-wise cracks or large chips, they however seem sound and will not flex and likely have an old internal repair. The grip area is coarsely square-pattern skip-line checkered as nicely as the very fine carving accenting the butt. The toeline shows a mushroom stud provision for sling with a sling bail suspended from the middle of the ramrod. The locks function mechanically but are not timed precisely with one another. “T. Lhoist” can be found in Liege in the early-mid-1800s, this is no doubt an alternative spelling, this arm likely made by himself or one of his “freres”. (3B10088-12) {ANTIQUE} (1500/2000)
About 20 ga., 34” part octagon part round barrels with turned medials at the point of transition showing oxidized bores. The barrels are an overall tarnished pewter patin...morea with overall smatterings of darker brown oxidation staining, showing perhaps the widely scattered pit here and there. There is a simple silver bladed front sight showing the damascened remnants of a gold-washed sunburst with additional lightly engraved floral decoration near the breech, also showing light gold wash damascening along with “canon tordu” also in light gold wash signifying a high-quality damascus twist barrel. Both lockplates are slightly convex with a rear teat, they are unadorned and feature simple bridled frizzens with makers name “T. Lhoest” on right lock, “& Freres” on left. There is a slightly fancy brass tailpipe and a heavy brass buttplate with lightly pierced and chiseled tang. The European walnut buttstock is a very generous, early Jaeger-style, and features carved walnut triggerguard with single grip flourish. The stock itself shows some very ornate open foliate scroll carving at right rear of the wrist, surrounding tang and flanking the nice square-bottom left side cheekpiece. The forend shows a number of length-wise cracks or large chips, they however seem sound and will not flex and likely have an old internal repair. The grip area is coarsely square-pattern skip-line checkered as nicely as the very fine carving accenting the butt. The toeline shows a mushroom stud provision for sling with a sling bail suspended from the middle of the ramrod. The locks function mechanically but are not timed precisely with one another. “T. Lhoist” can be found in Liege in the early-mid-1800s, this is no doubt an alternative spelling, this arm likely made by himself or one of his “freres”. (3B10088-12) {ANTIQUE} (1500/2000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine Ottoman Miquelet Tufek Musket

Fine Ottoman Miquelet Tufek Musket

Lot # 54 (Sale Order: 54 of 788)      

Low Estimate: 1,800High Estimate: 2,200
.50 cal, 26 1/2” octagon barrel with an oxidized bore. The barrel is lightly swamped at the muzzle and shows a very nice contrasting damascus pattern its full-length with three silver damascened overlays which are lightly, nicely engraved, flanking the simple brass front sight. There is an identical overlay on the barrels top flats encompassing a gold sunken touchmark which is not readily decipherable, with three identical geometric foliate damascened overlays at the breech. There is a raised sighting boss at the tang, both tang and edge of the sighting boss with neatly engraved overlaid silver. The patilla style lock shows similar silver overlay on the hammer, also lightly engraved as is the damascening and frizzen, frizzen spring and the shroud between frizzen spring and pan. There is nice bone and jade-colored inlay on the dovetailed top flat to the rear of the sighting boss, with overall tiny brass brads and triangular pinwheel forms. The sides of the stock body adjacent to the lock and the stock opposite it are over all inlaid with open flowing scroll bone inlays, dyed a greenish-hue, these as well over all decorated with tiny brass brads and the circular pinwheel inlays. The Mediterranean hardwood stock rates about very good with lovely grain figure in the exposed areas, the forend with three or four through-cracks, they remain tight due to the three brass capucines holding them to the barrel. There is a lightly engraved ball shaped trigger and all of the screws show some light engraving as well. The butt area is covered with a woven textile which appears to have then been tarred, about 75% of it remains, exposing the unadorned wood beneath. The lock actually still functions well mechanically, the decorative top jaw “spinner” which was once in place is lost to the years. There is an engraved iron ramrod present which appears correct. (3B10088-23) {ANTIQUE} (1800/2200)
.50 cal, 26 1/2” octagon barrel with an oxidized bore. The barrel is lightly swamped at the muzzle and shows a very nice contrasting damascus pattern its full-length with...more three silver damascened overlays which are lightly, nicely engraved, flanking the simple brass front sight. There is an identical overlay on the barrels top flats encompassing a gold sunken touchmark which is not readily decipherable, with three identical geometric foliate damascened overlays at the breech. There is a raised sighting boss at the tang, both tang and edge of the sighting boss with neatly engraved overlaid silver. The patilla style lock shows similar silver overlay on the hammer, also lightly engraved as is the damascening and frizzen, frizzen spring and the shroud between frizzen spring and pan. There is nice bone and jade-colored inlay on the dovetailed top flat to the rear of the sighting boss, with overall tiny brass brads and triangular pinwheel forms. The sides of the stock body adjacent to the lock and the stock opposite it are over all inlaid with open flowing scroll bone inlays, dyed a greenish-hue, these as well over all decorated with tiny brass brads and the circular pinwheel inlays. The Mediterranean hardwood stock rates about very good with lovely grain figure in the exposed areas, the forend with three or four through-cracks, they remain tight due to the three brass capucines holding them to the barrel. There is a lightly engraved ball shaped trigger and all of the screws show some light engraving as well. The butt area is covered with a woven textile which appears to have then been tarred, about 75% of it remains, exposing the unadorned wood beneath. The lock actually still functions well mechanically, the decorative top jaw “spinner” which was once in place is lost to the years. There is an engraved iron ramrod present which appears correct. (3B10088-23) {ANTIQUE} (1800/2200)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. M1 Garand Rifle by Springfield Armory with Experimental Handguard

U.S. M1 Garand Rifle by Springfield Armory with Experimental Handguard

Lot # 55 (Sale Order: 55 of 788)      

Low Estimate: 3,000High Estimate: 5,000
serial #4298498, 30-06, 24” 10-56 dated Springfield Armory barrel with scattered hints of pinprick pitting in an otherwise bright excellent bore. The metal surfaces retain about 97-98% original parkerized finish with scattered light wear on the high edges and contact points and a few light handling marks. The pistolgrip walnut stock is in near excellent condition with a 3/4” shallow chip forming on the heel, which flexes lightly, and a few very light handling marks. The one-piece black fiberglass handguard is in near excellent condition with light crazing at the nose, a light abrasion at the rear, and two light handling marks. The stock is marked with a crisp circled “P” proof on the inside of the pistolgrip, and the barrel channel is stamped with a small DoD acceptance mark in white ink. The receiver and barrel markings remain crisp, the barrel is marked “T” for targeted, the gas cylinder is “NM” marked, and all marked parts are post-WWII Springfield Armory manufacture. The rifle features a stamped triggerguard, 2-slot gas screw, and T105 rear sight drums. A desire to find a more durable and weather resistant replacement, for the hardwood stocks and handguards already in use on the M1 rifles lead to the development of experimental fiberglass stocks and handguards, a fine example of the latter being equipped on this rifle. Such experimental handguards were tested for only a short period of time, and as such are uncommon variants today. (14C9946-128) {C&R} [Richard Kumor Collection] (3000/5000)
serial #4298498, 30-06, 24” 10-56 dated Springfield Armory barrel with scattered hints of pinprick pitting in an otherwise bright excellent bore. The metal surfaces retai...moren about 97-98% original parkerized finish with scattered light wear on the high edges and contact points and a few light handling marks. The pistolgrip walnut stock is in near excellent condition with a 3/4” shallow chip forming on the heel, which flexes lightly, and a few very light handling marks. The one-piece black fiberglass handguard is in near excellent condition with light crazing at the nose, a light abrasion at the rear, and two light handling marks. The stock is marked with a crisp circled “P” proof on the inside of the pistolgrip, and the barrel channel is stamped with a small DoD acceptance mark in white ink. The receiver and barrel markings remain crisp, the barrel is marked “T” for targeted, the gas cylinder is “NM” marked, and all marked parts are post-WWII Springfield Armory manufacture. The rifle features a stamped triggerguard, 2-slot gas screw, and T105 rear sight drums. A desire to find a more durable and weather resistant replacement, for the hardwood stocks and handguards already in use on the M1 rifles lead to the development of experimental fiberglass stocks and handguards, a fine example of the latter being equipped on this rifle. Such experimental handguards were tested for only a short period of time, and as such are uncommon variants today. (14C9946-128) {C&R} [Richard Kumor Collection] (3000/5000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. M1 Garand Rifle by Springfield Armory

U.S. M1 Garand Rifle by Springfield Armory

Lot # 56 (Sale Order: 56 of 788)      

Low Estimate: 1,000High Estimate: 1,500
serial #2499058, 30-06, 24” 2-65 dated Springfield Armory barrel with a bright excellent bore. The metal surfaces retain about 97-98% arsenal parkerized finish with light wear on the high edges and contact points, and perhaps a few light handling marks on the gas cylinder. The pistolgrip blonde hardwood stock is in excellent condition as lightly cleaned with a few old light handling marks and an added glossy finish; the walnut handguards are in very good plus condition with a neatly repaired 3 3/4” crack and a few light handling marks. A softened boxed “P” proof is marked on the inside of the pistolgrip. The receiver markings remain clear with some softening of characters, the barrel markings remain clear, the drawing numbers on the bolt have been double struck leaving them illegible, the trigger housing is Winchester made, and the remaining marked parts are Springfield Armory manufactured; the right receiver leg is electro-pencil marked “RRAD / 6-65” signifying arsenal refurbishment. The rifle features a milled triggerguard, 2-slot gas screw, and T105 rear sight drums. Included with the rifle are a cleaning rod, multi-tool, and a modern reproduction leather cheekpiece and military-style leather sling. An attractive M1 that should shoot well. (14A10012-88) {C&R} (1000/1500)
serial #2499058, 30-06, 24” 2-65 dated Springfield Armory barrel with a bright excellent bore. The metal surfaces retain about 97-98% arsenal parkerized finish with light...more wear on the high edges and contact points, and perhaps a few light handling marks on the gas cylinder. The pistolgrip blonde hardwood stock is in excellent condition as lightly cleaned with a few old light handling marks and an added glossy finish; the walnut handguards are in very good plus condition with a neatly repaired 3 3/4” crack and a few light handling marks. A softened boxed “P” proof is marked on the inside of the pistolgrip. The receiver markings remain clear with some softening of characters, the barrel markings remain clear, the drawing numbers on the bolt have been double struck leaving them illegible, the trigger housing is Winchester made, and the remaining marked parts are Springfield Armory manufactured; the right receiver leg is electro-pencil marked “RRAD / 6-65” signifying arsenal refurbishment. The rifle features a milled triggerguard, 2-slot gas screw, and T105 rear sight drums. Included with the rifle are a cleaning rod, multi-tool, and a modern reproduction leather cheekpiece and military-style leather sling. An attractive M1 that should shoot well. (14A10012-88) {C&R} (1000/1500)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce “Gap Letter” U.S. M1 Garand Rifle by International Harvester

Scarce “Gap Letter” U.S. M1 Garand Rifle by International Harvester

Lot # 57 (Sale Order: 57 of 788)      

Low Estimate: 1,000High Estimate: 1,500
serial #4641712, 30-06, 24” 5-53 dated LMR barrel with a bright very good plus bore with scattered pinprick oxidation and a few light pits, but strong rifling. The metal surfaces retain about 75-80% arsenal parkerized finish thinning and toning to gray with light wear on the high edges and contact points, light pitting along the left side woodline of the receiver, and some scattered light handling marks. The pistolgrip walnut stock is in very good condition as lightly cleaned with a tight about 2” crack down the center of the wrist, an about 3/4” tight crack behind the triggerguard, a hairline 2 1/2” crack in the forward handguard, and some scattered light handling marks. The stock is marked with a partially faded “P” proof at the base of the pistolgrip, the barrel channel is unmarked, and the butt of the pistolgrip is marked with a faded “(ordnance wheel) / RA-P” rework mark. The receiver markings remain crisp and show the distinct “gap letter” formation found on some of the receivers made for International Harvester by Springfield Armory, the barrel markings remain crisp and the barrel is import marked just below the woodline of the rear handguard, the bolt and operating rod are “IHC” marked, and the hammer, safety, and trigger housing are “WRA” marked. The rifle features a milled triggerguard, 2-slot gas screw, and T105 rear sight drums. An interesting rifle from the least common M1 rifle manufacturer. (14A10051-136) {C&R}. (1000/1500)
serial #4641712, 30-06, 24” 5-53 dated LMR barrel with a bright very good plus bore with scattered pinprick oxidation and a few light pits, but strong rifling. The metal ...moresurfaces retain about 75-80% arsenal parkerized finish thinning and toning to gray with light wear on the high edges and contact points, light pitting along the left side woodline of the receiver, and some scattered light handling marks. The pistolgrip walnut stock is in very good condition as lightly cleaned with a tight about 2” crack down the center of the wrist, an about 3/4” tight crack behind the triggerguard, a hairline 2 1/2” crack in the forward handguard, and some scattered light handling marks. The stock is marked with a partially faded “P” proof at the base of the pistolgrip, the barrel channel is unmarked, and the butt of the pistolgrip is marked with a faded “(ordnance wheel) / RA-P” rework mark. The receiver markings remain crisp and show the distinct “gap letter” formation found on some of the receivers made for International Harvester by Springfield Armory, the barrel markings remain crisp and the barrel is import marked just below the woodline of the rear handguard, the bolt and operating rod are “IHC” marked, and the hammer, safety, and trigger housing are “WRA” marked. The rifle features a milled triggerguard, 2-slot gas screw, and T105 rear sight drums. An interesting rifle from the least common M1 rifle manufacturer. (14A10051-136) {C&R}. (1000/1500)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,100.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Johnson Automatics Model 1941 Semi-Auto Rifle

Johnson Automatics Model 1941 Semi-Auto Rifle

Lot # 58 (Sale Order: 58 of 788)      

Low Estimate: 3,500High Estimate: 5,000
serial #B7179, 30-06, 22” 41-dated barrel with a bright near excellent bore showing a few scattered light specks of minor oxidation and strong rifling throughout. The metal surfaces retain about 92% original Parkerized finish with most of the loss throughout the magazine which is toning to a lighter gray tone also with some specks of very mild oxidation staining. There is some very minor freckling along the barrel and all markings remain intact and strong with the rear right side showing the familiar “CRANSTON ARMS CO” in a triangle and small inspection star. The smooth walnut stocks remain in very good condition showing strong oil finish with some scattered light dings along the buttstock and the forend showing a few more moderate dents along the right side and bottom. The barrel and bolt show mismatched numbers from the receiver as-is typical, the rifle is equipped with a meter rear sight and the action seems to function well mechanically also with functional bolt hold-open. A solid Johnson rifle. (13B9946-101) {C&R} [Richard Kumor Collection] (3500/5000)
serial #B7179, 30-06, 22” 41-dated barrel with a bright near excellent bore showing a few scattered light specks of minor oxidation and strong rifling throughout. The met...moreal surfaces retain about 92% original Parkerized finish with most of the loss throughout the magazine which is toning to a lighter gray tone also with some specks of very mild oxidation staining. There is some very minor freckling along the barrel and all markings remain intact and strong with the rear right side showing the familiar “CRANSTON ARMS CO” in a triangle and small inspection star. The smooth walnut stocks remain in very good condition showing strong oil finish with some scattered light dings along the buttstock and the forend showing a few more moderate dents along the right side and bottom. The barrel and bolt show mismatched numbers from the receiver as-is typical, the rifle is equipped with a meter rear sight and the action seems to function well mechanically also with functional bolt hold-open. A solid Johnson rifle. (13B9946-101) {C&R} [Richard Kumor Collection] (3500/5000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Walther RZM Marked PPK Semi-Auto Pistol

Walther RZM Marked PPK Semi-Auto Pistol

Lot # 59 (Sale Order: 59 of 788)      

Low Estimate: 1,800High Estimate: 2,200
serial #829491, 32 ACP, 3 1/4” barrel with a mostly bright very good plus bore showing some scattered mild oxidation and strong rifling throughout. The metal surfaces of this pistol retain about 98% of an excellent factory quality restored blue finish showing some mild wear at the muzzle and just a couple of very tiny pinprick pits beneath the finish scattered about. The small parts retain all of their fine quality restored fire blue. All markings remain completely intact and unmolested with nice “RZM” marking on the left side slide and even the “(Crown) / N” commercial proofs remain mostly crisp. The slide is equipped with the appropriate 90-degree safety and is scratch-numbered matching the frame. The original checkered mottled brown synthetic grip with Walther banners remains in good condition showing moderate warping around the edges and a small crack at the top of the backstrap. The action seems to function well mechanically and one original magazine in very fine condition with matching synthetic finger rest is included. A solid example of these desirable pistols for the martial collector. (13B9946-24) {C&R} [Richard Kumor Collection] (1800/2200)
serial #829491, 32 ACP, 3 1/4” barrel with a mostly bright very good plus bore showing some scattered mild oxidation and strong rifling throughout. The metal surfaces of ...morethis pistol retain about 98% of an excellent factory quality restored blue finish showing some mild wear at the muzzle and just a couple of very tiny pinprick pits beneath the finish scattered about. The small parts retain all of their fine quality restored fire blue. All markings remain completely intact and unmolested with nice “RZM” marking on the left side slide and even the “(Crown) / N” commercial proofs remain mostly crisp. The slide is equipped with the appropriate 90-degree safety and is scratch-numbered matching the frame. The original checkered mottled brown synthetic grip with Walther banners remains in good condition showing moderate warping around the edges and a small crack at the top of the backstrap. The action seems to function well mechanically and one original magazine in very fine condition with matching synthetic finger rest is included. A solid example of these desirable pistols for the martial collector. (13B9946-24) {C&R} [Richard Kumor Collection] (1800/2200)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,700.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine Polish Eagle VIS-35 Semi-Auto Pistol by Radom

Fine Polish Eagle VIS-35 Semi-Auto Pistol by Radom

Lot # 60 (Sale Order: 60 of 788)      

Low Estimate: 3,500High Estimate: 5,000
serial #21565, 9mm, 4 3/4” barrel with a bright near excellent bore. The metal surfaces of this lovely 1938-dated pistol retain about 96% original blue showing some very mild thinning and toning to gray along the muzzle and a spot on the frontstrap, a little high edge wear and some scattered mild handling marks. There is a small ding on the back of the extractor but this is very unobtrusive and the small parts retain almost all of their fine fire blue including the grip screws. All markings remain intact and strong including the iconic Polish Eagle on the left side slide and the barrel remains bright showing just some very faint gray freckles along the chamber. The original black checkered Bakelite grips with “FB” on the left panel and “VIS” on the right remain in excellent condition showing a couple tiny handling marks and a few thin faint scuffs on the left panel. All of the serialized parts are matching and the action seems to function well mechanically. One original Polish-proofed magazine is included that has mostly toned to a mix of blue and gunmetal gray with “9119” scratched on the floorplate. A wonderful example of these superb Polish pistols. (13C9946-57) {C&R} [Richard Kumor Collection] (3500/5000)
serial #21565, 9mm, 4 3/4” barrel with a bright near excellent bore. The metal surfaces of this lovely 1938-dated pistol retain about 96% original blue showing some very ...moremild thinning and toning to gray along the muzzle and a spot on the frontstrap, a little high edge wear and some scattered mild handling marks. There is a small ding on the back of the extractor but this is very unobtrusive and the small parts retain almost all of their fine fire blue including the grip screws. All markings remain intact and strong including the iconic Polish Eagle on the left side slide and the barrel remains bright showing just some very faint gray freckles along the chamber. The original black checkered Bakelite grips with “FB” on the left panel and “VIS” on the right remain in excellent condition showing a couple tiny handling marks and a few thin faint scuffs on the left panel. All of the serialized parts are matching and the action seems to function well mechanically. One original Polish-proofed magazine is included that has mostly toned to a mix of blue and gunmetal gray with “9119” scratched on the floorplate. A wonderful example of these superb Polish pistols. (13C9946-57) {C&R} [Richard Kumor Collection] (3500/5000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Rare American Historical Foundation Walther PP “Adolf Hitler Presentation” Pistol

Very Rare American Historical Foundation Walther PP “Adolf Hitler Presentation” Pistol

Lot # 61 (Sale Order: 61 of 788)      

Low Estimate: 8,000High Estimate: 12,000
serial #708320, 32 ACP, 3 7/8” barrel with a bright excellent, unfired bore. This very rare, very highly embellished, “commemorative” pistol is one of only five made back in the 90’s, commissioned by the American Historical Foundation and engraved by master engraver Mr. Tim George. The arm is full-coverage engraved with loose open flowing scroll with fine background accenting stippling. It features the Walther Zella-Mehlis address on right of slide and “Ehrengabe der Familien Walther” in riband on left, roughly translated as “Honorarium from the Walther Family”. After the exceptional quality engraving, the arm was 24 karat gold plated, all of which remains, even in the bore of the pistol. The grips are hand carved ivory done by Mr. George as well, with open swirls of scroll and the same nice background accenting, the left grip with an intertwined gold “AH” inset into it, the right with the Walther banner. The blued body magazine has a matching engraved and gold plated baseplate. The pistol is designed to be a faithful copy of the arm presented to Adolf Hitler on his 50th birthday by Walther and is one of only five such arms made and offered by the American Historical Foundation to discerning and discreet clients. The gun rides in an oak presentation case with red felt lining, the lining itself showing a couple tears beneath the gun, but the case overall remaining excellent. Mr. George confirmed that indeed, he made only five of these arms and suggested that replicating the work today would run in the neighborhood of 10,000 dollars. A very rare, superbly executed arm worthy of the finest Walther, World War Two or advanced handgun collections. (3E9946-52) {MODERN} [Richard Kumor Collection] (8,000/12,000)
serial #708320, 32 ACP, 3 7/8” barrel with a bright excellent, unfired bore. This very rare, very highly embellished, “commemorative” pistol is one of only five made bac...morek in the 90’s, commissioned by the American Historical Foundation and engraved by master engraver Mr. Tim George. The arm is full-coverage engraved with loose open flowing scroll with fine background accenting stippling. It features the Walther Zella-Mehlis address on right of slide and “Ehrengabe der Familien Walther” in riband on left, roughly translated as “Honorarium from the Walther Family”. After the exceptional quality engraving, the arm was 24 karat gold plated, all of which remains, even in the bore of the pistol. The grips are hand carved ivory done by Mr. George as well, with open swirls of scroll and the same nice background accenting, the left grip with an intertwined gold “AH” inset into it, the right with the Walther banner. The blued body magazine has a matching engraved and gold plated baseplate. The pistol is designed to be a faithful copy of the arm presented to Adolf Hitler on his 50th birthday by Walther and is one of only five such arms made and offered by the American Historical Foundation to discerning and discreet clients. The gun rides in an oak presentation case with red felt lining, the lining itself showing a couple tears beneath the gun, but the case overall remaining excellent. Mr. George confirmed that indeed, he made only five of these arms and suggested that replicating the work today would run in the neighborhood of 10,000 dollars. A very rare, superbly executed arm worthy of the finest Walther, World War Two or advanced handgun collections. (3E9946-52) {MODERN} [Richard Kumor Collection] (8,000/12,000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 11,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Early Polish Eagle VIS-35 Semi-Auto Pistol by Radom

Early Polish Eagle VIS-35 Semi-Auto Pistol by Radom

Lot # 62 (Sale Order: 62 of 788)      

Low Estimate: 3,500High Estimate: 5,000
serial #2525, 9mm, 4 3/4” barrel with a bright near excellent bore showing some mild frosting and strong rifling throughout. The metal surfaces of this 1936-dated pistol retain about 90% original blue with most of the loss due to scattered areas of light oxidation staining along the high edges, more noticeable along the right side slide, along with some overall high edge wear and light handling marks. The barrel remains partially bright showing some mild oxidation staining along the chamber area and the small parts retain most of their nice fire blue. All markings remain crisp and clear including the Polish Eagle on the left side slide. The original black checkered Bakelite grips with “FB” on the left panel and “VIS” on the right remain in very good plus condition, the left panel with a small chip at the edge of the base and some other smaller handling marks scattered about. All of the serialized parts are matching and the action seems to function well mechanically. One original Polish-proofed magazine is included showing moderate wear and some light oxidation staining. A very handsome and early example that has seen some honest use. (13C9946-58) {C&R} [Richard Kumor Collection] (3500/5000)
serial #2525, 9mm, 4 3/4” barrel with a bright near excellent bore showing some mild frosting and strong rifling throughout. The metal surfaces of this 1936-dated pistol ...moreretain about 90% original blue with most of the loss due to scattered areas of light oxidation staining along the high edges, more noticeable along the right side slide, along with some overall high edge wear and light handling marks. The barrel remains partially bright showing some mild oxidation staining along the chamber area and the small parts retain most of their nice fire blue. All markings remain crisp and clear including the Polish Eagle on the left side slide. The original black checkered Bakelite grips with “FB” on the left panel and “VIS” on the right remain in very good plus condition, the left panel with a small chip at the edge of the base and some other smaller handling marks scattered about. All of the serialized parts are matching and the action seems to function well mechanically. One original Polish-proofed magazine is included showing moderate wear and some light oxidation staining. A very handsome and early example that has seen some honest use. (13C9946-58) {C&R} [Richard Kumor Collection] (3500/5000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

German P.35(p) Semi-Auto Pistol by Radom

German P.35(p) Semi-Auto Pistol by Radom

Lot # 63 (Sale Order: 63 of 788)      

Low Estimate: 1,200High Estimate: 1,800
serial #H0472, 9mm, 4 3/4” barrel with a bright excellent bore. The metal surfaces of this Grade III pistol retain about 85% original thinning blue showing high edge wear, areas toning to pewter gunmetal and a spot of light oxidation staining on the right side near the magazine catch. The barrel remains mostly bright and the metal surfaces show the typical rough machining of late-war production. All markings remain intact and crisp with proper slide markings, “(Eagle) / 77” Waffenamts on the slide and frame and the slide also with eagle firing proof and “(Eagle) / WaA623”. The left side barrel lug shows small eagle firing proof and “(Eagle) / 623” Waffenamt. The grooved hardwood grips remain in near excellent condition with a couple tiny dings and minor handling marks, both showing strong Waffenamt stamps on their interiors. The serialized parts are matching, the action seems to function well mechanically and there is no magazine present. A solid late-war Radom pistol. (13B9946-68) {C&R} [Richard Kumor Collection] (1200/1800)
serial #H0472, 9mm, 4 3/4” barrel with a bright excellent bore. The metal surfaces of this Grade III pistol retain about 85% original thinning blue showing high edge wear...more, areas toning to pewter gunmetal and a spot of light oxidation staining on the right side near the magazine catch. The barrel remains mostly bright and the metal surfaces show the typical rough machining of late-war production. All markings remain intact and crisp with proper slide markings, “(Eagle) / 77” Waffenamts on the slide and frame and the slide also with eagle firing proof and “(Eagle) / WaA623”. The left side barrel lug shows small eagle firing proof and “(Eagle) / 623” Waffenamt. The grooved hardwood grips remain in near excellent condition with a couple tiny dings and minor handling marks, both showing strong Waffenamt stamps on their interiors. The serialized parts are matching, the action seems to function well mechanically and there is no magazine present. A solid late-war Radom pistol. (13B9946-68) {C&R} [Richard Kumor Collection] (1200/1800)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,100.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

German P.08 Luger S/42 K-Date Pistol by Mauser

German P.08 Luger S/42 K-Date Pistol by Mauser

Lot # 64 (Sale Order: 64 of 788)      

Low Estimate: 1,500High Estimate: 2,000
serial #8146, 9mm, 4" barrel with a fair bore showing moderate frosting and somewhat worn rifling throughout. This pistol appears to have been nicely period-restored, likely in England, and retains about 95% fine quality rust blue showing some light high edge and operational wear, a few small areas thinning to a plum-brown patina and perhaps a couple scattered pinprick pits. The toggle pins show lovely fire blue and the small parts retain a healthy amount of mild straw color, very strong along the extractor, with overall silvering. The markings remain mostly intact, many are still quite crisp including the "K" date and "S/42" on the toggle, the German inspector and proof marks along the receiver and barrel are rather soft and there are British export proofs along the right side barrel and small London proofs stamped along the various parts. The checkered walnut grips are stamp-numbered to the gun and remain in very good condition showing a tiny chip behind the safety, some lightly chipped points and minor dings. All of the serialized parts are matching including the grooved firing pin and some of them still bear "S" stamps, the edge of the hold-open is worn and does not lock the toggle back but the action otherwise seems to function well mechanically. One bright-bodied aluminum base magazine numbered "7959" is included. A very attractive example of these desirable Lugers made in 1934. (13B9946-32) {C&R} [Richard Kumor Collection] (1500/2000)
serial #8146, 9mm, 4" barrel with a fair bore showing moderate frosting and somewhat worn rifling throughout. This pistol appears to have been nicely period-restored, lik...moreely in England, and retains about 95% fine quality rust blue showing some light high edge and operational wear, a few small areas thinning to a plum-brown patina and perhaps a couple scattered pinprick pits. The toggle pins show lovely fire blue and the small parts retain a healthy amount of mild straw color, very strong along the extractor, with overall silvering. The markings remain mostly intact, many are still quite crisp including the "K" date and "S/42" on the toggle, the German inspector and proof marks along the receiver and barrel are rather soft and there are British export proofs along the right side barrel and small London proofs stamped along the various parts. The checkered walnut grips are stamp-numbered to the gun and remain in very good condition showing a tiny chip behind the safety, some lightly chipped points and minor dings. All of the serialized parts are matching including the grooved firing pin and some of them still bear "S" stamps, the edge of the hold-open is worn and does not lock the toggle back but the action otherwise seems to function well mechanically. One bright-bodied aluminum base magazine numbered "7959" is included. A very attractive example of these desirable Lugers made in 1934. (13B9946-32) {C&R} [Richard Kumor Collection] (1500/2000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Custom Engraved Clint Finley Colt Single Action Army Revolver

Custom Engraved Clint Finley Colt Single Action Army Revolver

Lot # 65 (Sale Order: 65 of 788)      

Low Estimate: 3,000High Estimate: 5,000
serial #268895, 44 Special, 5 1/2” barrel with a bright excellent bore. This is a rather fancy revolver engraved in an antique Nimschke-style pattern by 20th century engraver Clint Finley. Much of the arm is now in-the-white, that metal being a smooth silvery gunmetal patina, the protected areas at the root of the barrel, ejector rod housing, pinched area of the frame and the cylinder flutes show remnants of a nice soft, slightly tarnishing silver plate, overall giving the gun a very honest and antique-like appearance. The arm features open flowing quality scroll with very fine background punch-dot shading and “batwing” embellishment along the topstrap, overall in about a B-level of coverage. The frame is near fully engraved, the barrel three quarters or more and the cylinder fully engraved, the butt un-engraved and the frontstrap and root of the guard un-engraved with a bit of engraving atop the backstrap. The arm wears a very nice antique one-piece ivory grip with beautiful cream and butter tones and antique age crackling throughout the butt left and right. The hammer is much brighter than the balance of the steel surfaces surrounding it and is no doubt a later replacement with an un-bordered checkered spur. The backstrap is neatly engraved beneath the grip “Finley 78”, undoubtedly the early work of Mr. Clinton Finley, who started engraving in the early 70s as a hobby, quickly perfecting his craft and today is world-class. The gun times and locks up well and the only number is located on the frame, both the triggerguard and the butt are un-numbered. A very charming, very handsome, very antique-looking Single Action Army in a very desirable chambering. (3B9997-300) {C&R} [John Lipski Collection] (3000/5000)
serial #268895, 44 Special, 5 1/2” barrel with a bright excellent bore. This is a rather fancy revolver engraved in an antique Nimschke-style pattern by 20th century engr...moreaver Clint Finley. Much of the arm is now in-the-white, that metal being a smooth silvery gunmetal patina, the protected areas at the root of the barrel, ejector rod housing, pinched area of the frame and the cylinder flutes show remnants of a nice soft, slightly tarnishing silver plate, overall giving the gun a very honest and antique-like appearance. The arm features open flowing quality scroll with very fine background punch-dot shading and “batwing” embellishment along the topstrap, overall in about a B-level of coverage. The frame is near fully engraved, the barrel three quarters or more and the cylinder fully engraved, the butt un-engraved and the frontstrap and root of the guard un-engraved with a bit of engraving atop the backstrap. The arm wears a very nice antique one-piece ivory grip with beautiful cream and butter tones and antique age crackling throughout the butt left and right. The hammer is much brighter than the balance of the steel surfaces surrounding it and is no doubt a later replacement with an un-bordered checkered spur. The backstrap is neatly engraved beneath the grip “Finley 78”, undoubtedly the early work of Mr. Clinton Finley, who started engraving in the early 70s as a hobby, quickly perfecting his craft and today is world-class. The gun times and locks up well and the only number is located on the frame, both the triggerguard and the butt are un-numbered. A very charming, very handsome, very antique-looking Single Action Army in a very desirable chambering. (3B9997-300) {C&R} [John Lipski Collection] (3000/5000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Special Model 1861 Percussion Rifle-Musket by Colt

U.S. Special Model 1861 Percussion Rifle-Musket by Colt

Lot # 66 (Sale Order: 66 of 788)      

Low Estimate: 1,200High Estimate: 1,800
.64 cal., 40” smoothbore barrel with a mostly bright fine bore showing some areas of light pitting. The metal surfaces of this interesting musket are toning to a mottled gray and brown patina with some softened light pitting around the bolster and on the barrel forward of the forend cap with some scattered spots of the same overall, along with areas of old light oxidation and dried yellow preservative throughout. The left quarter-flat of the barrel is marked “S” along with a slightly-softened “V / P / (eagle head)” proof while the lockplate is dated 1864 to the rear of the hammer and marked “U.S. / COLT’S PT. F.A. MFG CO. / HARTFORD CT.” ahead and there is a softened Federal Eagle on the bolster. The late-production American black walnut stock with barrel band retaining springs rates about very fine, retaining some nice edges along the stock flats, and showing a light coat of added finish which is worn along the left side, and with a small spot of wear behind the lockplate. There are some expected light handling marks overall and the left stock flat features a very crisp “WPT” boxed inspector’s cartouche, there is a small five-pointed (star) to the left of the barrel tang and “S” is behind the triggerguard. The original sights, sling swivels and correct cupped tulip-head ramrod with straight shaft and threaded end are intact and the action remains strong and crisp. This interesting Special Model 1861 retains the early-production clamping barrel bands despite being outfitted with barrel band retaining springs which, according to Moller American Military Shoulder Arms Vol. III, points to its assembly by Colt following the Civil War. (23B9997-110) {ANTIQUE} [John Lipski Collection] (1200/1800)
.64 cal., 40” smoothbore barrel with a mostly bright fine bore showing some areas of light pitting. The metal surfaces of this interesting musket are toning to a mottled ...moregray and brown patina with some softened light pitting around the bolster and on the barrel forward of the forend cap with some scattered spots of the same overall, along with areas of old light oxidation and dried yellow preservative throughout. The left quarter-flat of the barrel is marked “S” along with a slightly-softened “V / P / (eagle head)” proof while the lockplate is dated 1864 to the rear of the hammer and marked “U.S. / COLT’S PT. F.A. MFG CO. / HARTFORD CT.” ahead and there is a softened Federal Eagle on the bolster. The late-production American black walnut stock with barrel band retaining springs rates about very fine, retaining some nice edges along the stock flats, and showing a light coat of added finish which is worn along the left side, and with a small spot of wear behind the lockplate. There are some expected light handling marks overall and the left stock flat features a very crisp “WPT” boxed inspector’s cartouche, there is a small five-pointed (star) to the left of the barrel tang and “S” is behind the triggerguard. The original sights, sling swivels and correct cupped tulip-head ramrod with straight shaft and threaded end are intact and the action remains strong and crisp. This interesting Special Model 1861 retains the early-production clamping barrel bands despite being outfitted with barrel band retaining springs which, according to Moller American Military Shoulder Arms Vol. III, points to its assembly by Colt following the Civil War. (23B9997-110) {ANTIQUE} [John Lipski Collection] (1200/1800)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,400.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Special Model 1861 Percussion Rifle-Musket by Colt

U.S. Special Model 1861 Percussion Rifle-Musket by Colt

Lot # 67 (Sale Order: 67 of 788)      

Low Estimate: 1,000High Estimate: 1,500
.58 cal., 40” barrel with a bright very good bore showing some scattered spots of light pitting in the rifling that is worn at the muzzle. The barrel and mountings are toning to a lightly-mottled gray patina showing tiny spots of pinprick pitting and speckles of light oxidation staining overall and some fine cleaning striations on the barrel bands. The lockplate and hammer have aged to a dull gray case-hardened patina retaining some trace colors and also showing some spots of light oxidation staining along with splashes of hardened preservative. The date on the top of the breech and the proof mark on the left quarter flat have been largely lost to time with only “18” and a partial “6” remaining legible on the prior and “V” on the later, while a slightly softened “STEEL” is on the left breech flat. The lockplate is crisply-dated 1864 behind the hammer while the markings ahead of the hammer have also been partially-lost with “U.S. / A. MFG CO. / ORD CT. remaining visible and the remnant of a small Federal Eagle is on the bolster. The American black walnut stock rates about very good as perhaps lightly cleaned with a repaired crack and a flexing crack both in the right side of the forend behind, a small filled repair to the left of the ramrod channel between the middle and lower bands, a narrow chip is missing to the left of the barrel tang, there is some minor erosion of the wood behind the bolster and some scattered light dings and handling marks from military service overall. There is the faint remnant of a boxed inspector’s cartouche on the left stock flat and the stock is otherwise not marked. The barrel is sighted with a blade front and Model 1863 Type II rear, the sling swivels and correct cupped tulip head ramrod with straight shaft and threaded end are intact and the action remains strong and crisp. Colt managed to deliver an astounding 100,005 Special Model 1861 rifle-muskets under three contracts between 1862-64. (23A9997-246) {ANTIQUE} [John Lipski Collection] (1000/1500)
.58 cal., 40” barrel with a bright very good bore showing some scattered spots of light pitting in the rifling that is worn at the muzzle. The barrel and mountings are to...morening to a lightly-mottled gray patina showing tiny spots of pinprick pitting and speckles of light oxidation staining overall and some fine cleaning striations on the barrel bands. The lockplate and hammer have aged to a dull gray case-hardened patina retaining some trace colors and also showing some spots of light oxidation staining along with splashes of hardened preservative. The date on the top of the breech and the proof mark on the left quarter flat have been largely lost to time with only “18” and a partial “6” remaining legible on the prior and “V” on the later, while a slightly softened “STEEL” is on the left breech flat. The lockplate is crisply-dated 1864 behind the hammer while the markings ahead of the hammer have also been partially-lost with “U.S. / A. MFG CO. / ORD CT. remaining visible and the remnant of a small Federal Eagle is on the bolster. The American black walnut stock rates about very good as perhaps lightly cleaned with a repaired crack and a flexing crack both in the right side of the forend behind, a small filled repair to the left of the ramrod channel between the middle and lower bands, a narrow chip is missing to the left of the barrel tang, there is some minor erosion of the wood behind the bolster and some scattered light dings and handling marks from military service overall. There is the faint remnant of a boxed inspector’s cartouche on the left stock flat and the stock is otherwise not marked. The barrel is sighted with a blade front and Model 1863 Type II rear, the sling swivels and correct cupped tulip head ramrod with straight shaft and threaded end are intact and the action remains strong and crisp. Colt managed to deliver an astounding 100,005 Special Model 1861 rifle-muskets under three contracts between 1862-64. (23A9997-246) {ANTIQUE} [John Lipski Collection] (1000/1500)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to p****t! to YOU!

Placing your bid. please wait...

Fine U.S. Model 1861 Percussion-Rifle Musket by Springfield Armory

Fine U.S. Model 1861 Percussion-Rifle Musket by Springfield Armory

Lot # 68 (Sale Order: 68 of 788)      

Low Estimate: 1,500High Estimate: 2,000
.58 cal., 40” barrel with a bright excellent bore. The “National Armory Bright” metal surfaces rate very fine with a few tiny areas of softened very light pitting and speckles of very light oxidation staining overall. The buttplate and triggerguard have aged to a cloudy gray patina with light oxidation on the heel and tiny spots of the same on the bow causing it to appear more brown-gray. The corners of the breech remain crisp with “1862” on the top flat and a strong “V / P” over a softened (eagle head) while the rear of the lockplate is also dated 1862 and bears a crisp Federal Eagle ahead of the hammer and “U.S. / SPRINGFIELD” below the bolster. The attractive American black walnut stock also rates fine with a 3/4” dent on the left side of the forend and a smaller impact mark on the right between the bands, a few scratches on the toe and some scattered signs of service to be expected of a 160 year old rifle. The stock flats are sharp with the left featuring two cartouches, one clearly marked “ESA” while the script initials of the other are partially obscured by a light handling mark and there is a clear “SE” inspection mark behind the triggerguard. The sling swivels are intact, a correct cupped tulip-head ramrod with retaining swell and threaded end is included and the lock is strong and crisp. A very nice example of this important martial shoulder arm in a very fine state of condition. (23B10021-30) {ANTIQUE} (1500/2000)
.58 cal., 40” barrel with a bright excellent bore. The “National Armory Bright” metal surfaces rate very fine with a few tiny areas of softened very light pitting and spe...moreckles of very light oxidation staining overall. The buttplate and triggerguard have aged to a cloudy gray patina with light oxidation on the heel and tiny spots of the same on the bow causing it to appear more brown-gray. The corners of the breech remain crisp with “1862” on the top flat and a strong “V / P” over a softened (eagle head) while the rear of the lockplate is also dated 1862 and bears a crisp Federal Eagle ahead of the hammer and “U.S. / SPRINGFIELD” below the bolster. The attractive American black walnut stock also rates fine with a 3/4” dent on the left side of the forend and a smaller impact mark on the right between the bands, a few scratches on the toe and some scattered signs of service to be expected of a 160 year old rifle. The stock flats are sharp with the left featuring two cartouches, one clearly marked “ESA” while the script initials of the other are partially obscured by a light handling mark and there is a clear “SE” inspection mark behind the triggerguard. The sling swivels are intact, a correct cupped tulip-head ramrod with retaining swell and threaded end is included and the lock is strong and crisp. A very nice example of this important martial shoulder arm in a very fine state of condition. (23B10021-30) {ANTIQUE} (1500/2000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Remington Model 1863 Zouave Percussion Rifle

Remington Model 1863 Zouave Percussion Rifle

Lot # 69 (Sale Order: 69 of 788)      

Low Estimate: 1,500High Estimate: 2,000
.58 cal, 33” barrel with a bright excellent bore and strong rifling. The barrel of this “Zouave” rifle manufactured in 1863 is toning to a mottled blue-brown patina with a few spots of minor pitting and old oxidation intermixed with remnants of original blue overall. The lockplate is toning to a mottled gray case-hardened patina with light surface oxidation while the hammer and breech tang have turned a brown patina with minor pitting throughout with remnants of case-hardened colors in the protected areas of the hammer. The lockplate is dated “1863” behind the hammer and marked with a “(Federal Eagle) / REMINGTON’S / ILION, N.Y.” ahead of the hammer, “U.S.” forward of this, and the front of the lockplate is stamped with the inspector’s initial “P”. The left barrel flat is stamped “STEEL” along with the inspector’s initials “B.H.”, while the breech is marked with a softened “US” and the remnants of a “V / P / (eagle head)” proof mark. The elegant brass patchbox and furniture has mostly turned a mottled ochre patina with some scattered spots of staining and verdigris along with clear sub-inspector marks throughout. The tang of the buttplate is marked “US” and a spare nipple is stored within the patchbox. The handsome smooth black walnut stock rates about very good plus with a touch of old added finish, a repaired hairline crack above the forward side screw, minor wear to the ramrod channel, and scattered dents and dings from the years while the left stock flat displays two very crisp cartouches. The rifle is sighted with an integral blade front sight and Model 1858 two leaf rear sight, the correct cupped “tulip” head ramrod with threaded end is in place below the barrel. The action of this classy rifle remains very strong and crisp. A very nice Remington Model 1863 with an excellent barrel. (23B10088-17) {ANTIQUE} (1500/2000)
.58 cal, 33” barrel with a bright excellent bore and strong rifling. The barrel of this “Zouave” rifle manufactured in 1863 is toning to a mottled blue-brown patina with ...morea few spots of minor pitting and old oxidation intermixed with remnants of original blue overall. The lockplate is toning to a mottled gray case-hardened patina with light surface oxidation while the hammer and breech tang have turned a brown patina with minor pitting throughout with remnants of case-hardened colors in the protected areas of the hammer. The lockplate is dated “1863” behind the hammer and marked with a “(Federal Eagle) / REMINGTON’S / ILION, N.Y.” ahead of the hammer, “U.S.” forward of this, and the front of the lockplate is stamped with the inspector’s initial “P”. The left barrel flat is stamped “STEEL” along with the inspector’s initials “B.H.”, while the breech is marked with a softened “US” and the remnants of a “V / P / (eagle head)” proof mark. The elegant brass patchbox and furniture has mostly turned a mottled ochre patina with some scattered spots of staining and verdigris along with clear sub-inspector marks throughout. The tang of the buttplate is marked “US” and a spare nipple is stored within the patchbox. The handsome smooth black walnut stock rates about very good plus with a touch of old added finish, a repaired hairline crack above the forward side screw, minor wear to the ramrod channel, and scattered dents and dings from the years while the left stock flat displays two very crisp cartouches. The rifle is sighted with an integral blade front sight and Model 1858 two leaf rear sight, the correct cupped “tulip” head ramrod with threaded end is in place below the barrel. The action of this classy rifle remains very strong and crisp. A very nice Remington Model 1863 with an excellent barrel. (23B10088-17) {ANTIQUE} (1500/2000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

German Flintlock Belt Pistol by Johann Jacob Humburg

German Flintlock Belt Pistol by Johann Jacob Humburg

Lot # 70 (Sale Order: 70 of 788)      

Low Estimate: 1,200High Estimate: 1,800
.56 cal, 8 3/8" round barrel with a lightly oxidized bore. The metal surfaces are a mix of silvery gunmetal patina and areas toning to a mild brown patina with some spots of minor pinprick pitting and a tiny crack at the upper tang next to the screw. The convex lockplate features a pronounced teat at the rear, swan neck cock, unbridled frizzen and a lovely chiseled frizzen spring with foliate extension. Lock markings are rather faint but read "IOH IACOB HUMBURG" and a crisper "A CASSEL" below the frizzen spring. The pistol features brass hardware throughout including: blade front sight, ramrod thimble and tailpipe, triggerguard with simple column extension, lock screw escutcheons with light foliate and dog's head embellishments and buttcap with a wonderful Green Man grotesque. All of the brass has toned to an attractive mellow ocher patina. The European walnut stock with buffalo horn tip remains in very good plus condition with a thin crack at the tip, some scattered moderate dings and handling marks. The stock features foliate carving at the upper tang and nice bordering around all of the hardware. A replacement simple steel ramrod is included and the lock functions crisply. A lovely German pistol, Humburg was active in Kassel from 1740-1780. (13C10088-21) {ANTIQUE} (1200/1800)
.56 cal, 8 3/8" round barrel with a lightly oxidized bore. The metal surfaces are a mix of silvery gunmetal patina and areas toning to a mild brown patina with some spots...more of minor pinprick pitting and a tiny crack at the upper tang next to the screw. The convex lockplate features a pronounced teat at the rear, swan neck cock, unbridled frizzen and a lovely chiseled frizzen spring with foliate extension. Lock markings are rather faint but read "IOH IACOB HUMBURG" and a crisper "A CASSEL" below the frizzen spring. The pistol features brass hardware throughout including: blade front sight, ramrod thimble and tailpipe, triggerguard with simple column extension, lock screw escutcheons with light foliate and dog's head embellishments and buttcap with a wonderful Green Man grotesque. All of the brass has toned to an attractive mellow ocher patina. The European walnut stock with buffalo horn tip remains in very good plus condition with a thin crack at the tip, some scattered moderate dings and handling marks. The stock features foliate carving at the upper tang and nice bordering around all of the hardware. A replacement simple steel ramrod is included and the lock functions crisply. A lovely German pistol, Humburg was active in Kassel from 1740-1780. (13C10088-21) {ANTIQUE} (1200/1800)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,100.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Exceptional Custom Denise Thirion Engraved Colt Single Action Army Revolver

Exceptional Custom Denise Thirion Engraved Colt Single Action Army Revolver

Lot # 71 (Sale Order: 71 of 788)      

Low Estimate: 4,000High Estimate: 6,000
serial #S13825A, 45 Colt, 4 3/4” barrel with a bright, unfired bore. This is an excellent example of the stunning work we have come to know and expect from former Colt master engraver Denise Thirion. The gun retains all of its post-engraving bright nickel and is overall C plus engraved in master level flowing Nimschke style scroll of the finest quality, with back-ground punch-dot shading providing lovely accenting contrast; even the front sight and sides of hammer with handsome engraving. Within the flourishes are simple floral motifs which are very endearing and there is understated baked black ink added throughout the engraving to highlight her exceptional work. The revolver wears a one piece Dan Chesiack-fitted smooth ivory grip with nice creams and some light caramel hues, showing lovely grain structure. The screws, trigger, ejector rod head, base pin and base pin catch are all beautifully fire-blued. Included with the arm is a blue Colt custom shop factory box with white outer shipping sleeve, the factory label is intact showing the arm shipping as blued and color case-hardened with checkered eagle stocks, Ms. Thirion working her magic shortly thereafter. Included is a letter from her detailing the work done to the arm and talking about the style and coverage of engraving and she has signed the work on the grip frame beneath the grip; the original factory instruction pamphlet and papers are included. The combination of fire blue, bright nickel, and the lovely cream-colored ivory provides an exceptionally attractive contrast, the arm of course un-turned, un-fired since leaving the factory. (3E10066-2) {MODERN} (4000/6000)
serial #S13825A, 45 Colt, 4 3/4” barrel with a bright, unfired bore. This is an excellent example of the stunning work we have come to know and expect from former Colt m...moreaster engraver Denise Thirion. The gun retains all of its post-engraving bright nickel and is overall C plus engraved in master level flowing Nimschke style scroll of the finest quality, with back-ground punch-dot shading providing lovely accenting contrast; even the front sight and sides of hammer with handsome engraving. Within the flourishes are simple floral motifs which are very endearing and there is understated baked black ink added throughout the engraving to highlight her exceptional work. The revolver wears a one piece Dan Chesiack-fitted smooth ivory grip with nice creams and some light caramel hues, showing lovely grain structure. The screws, trigger, ejector rod head, base pin and base pin catch are all beautifully fire-blued. Included with the arm is a blue Colt custom shop factory box with white outer shipping sleeve, the factory label is intact showing the arm shipping as blued and color case-hardened with checkered eagle stocks, Ms. Thirion working her magic shortly thereafter. Included is a letter from her detailing the work done to the arm and talking about the style and coverage of engraving and she has signed the work on the grip frame beneath the grip; the original factory instruction pamphlet and papers are included. The combination of fire blue, bright nickel, and the lovely cream-colored ivory provides an exceptionally attractive contrast, the arm of course un-turned, un-fired since leaving the factory. (3E10066-2) {MODERN} (4000/6000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,750.00

You've been outbid  to m****1! to YOU!

Placing your bid. please wait...

Lovely Italian Percussion-Converted Holster Pistol by Cominazzo

Lovely Italian Percussion-Converted Holster Pistol by Cominazzo

Lot # 72 (Sale Order: 72 of 788)      

Low Estimate: 2,000High Estimate: 3,000
.58 cal, 11" part round part multi-faceted barrel with turned medial at the point of transition and an oxidized bore. The metal surfaces have mostly toned to a dark gray and plum-brown patina showing some old oxidation staining and handling marks. The forward barrel pin fastener has detached from the barrel, there is a small crack at the muzzle and the front sight is worn down. The barrel markings are mostly legible with parts of "LAZARINO" obscured but "COMINAZZO" completely visible. The lockplate is no doubt original hardware and has been expertly converted to percussion during the period of use; the bottom edge of the cap splash guard has broken off long ago but this is rather unobtrusive, there is a small decorative motif with gold wash behind the hammer and the hammer itself retains scattered flakes of bright fire blue. The pistol is equipped with fancy brass mountings throughout including faceted ramrod thimble and tailpipe, long tang triggerguard with detailed foliate extension, pierced foliate sideplate with female Romanesque bust, engraved monogram plate atop the wrist and heavy buttcap; all are toning to a pleasant ocher patina still showing strong remnants of gold wash. The hardware also features wonderful cast-in-relief embellishments and punch-dot shading with foliate scroll and panoply of arms at the bow of the guard and lion's head, scrollwork and Roman warrior on the buttcap. The European walnut stock with buffalo horn tip remains in very good plus condition showing a few tiny old chips at the high edges, a small repair near the triggerguard tang, light crack at the edge of the buttcap and overall handling marks. The stock shows lovely grain figure throughout and features wonderful carved borders around the hardware and foliate motif at the upper tang. A simple replacement ramrod is present and the lock will require some mechanical attention as it does not hold at full cock every now and then. A very fine pistol from this renowned Italian gunmaker with lovely ornate appointments. (13D10088-20) {ANTIQUE} (2000/3000)
.58 cal, 11" part round part multi-faceted barrel with turned medial at the point of transition and an oxidized bore. The metal surfaces have mostly toned to a dark gray ...moreand plum-brown patina showing some old oxidation staining and handling marks. The forward barrel pin fastener has detached from the barrel, there is a small crack at the muzzle and the front sight is worn down. The barrel markings are mostly legible with parts of "LAZARINO" obscured but "COMINAZZO" completely visible. The lockplate is no doubt original hardware and has been expertly converted to percussion during the period of use; the bottom edge of the cap splash guard has broken off long ago but this is rather unobtrusive, there is a small decorative motif with gold wash behind the hammer and the hammer itself retains scattered flakes of bright fire blue. The pistol is equipped with fancy brass mountings throughout including faceted ramrod thimble and tailpipe, long tang triggerguard with detailed foliate extension, pierced foliate sideplate with female Romanesque bust, engraved monogram plate atop the wrist and heavy buttcap; all are toning to a pleasant ocher patina still showing strong remnants of gold wash. The hardware also features wonderful cast-in-relief embellishments and punch-dot shading with foliate scroll and panoply of arms at the bow of the guard and lion's head, scrollwork and Roman warrior on the buttcap. The European walnut stock with buffalo horn tip remains in very good plus condition showing a few tiny old chips at the high edges, a small repair near the triggerguard tang, light crack at the edge of the buttcap and overall handling marks. The stock shows lovely grain figure throughout and features wonderful carved borders around the hardware and foliate motif at the upper tang. A simple replacement ramrod is present and the lock will require some mechanical attention as it does not hold at full cock every now and then. A very fine pistol from this renowned Italian gunmaker with lovely ornate appointments. (13D10088-20) {ANTIQUE} (2000/3000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,400.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Dutch Percussion Target Pistol by Beaumont

Dutch Percussion Target Pistol by Beaumont

Lot # 73 (Sale Order: 73 of 788)      

Low Estimate: 1,200High Estimate: 1,800
.44 cal, 11" octagon barrel with an oxidized bore still showing evident rifling throughout. The barrel of this attractive pistol retains perhaps 20% original blue mostly toned to a deep brown patina with moderate freckling scattered throughout. The barrel flat features silver inlay maker's mark reading "DE BEAUMONT MAESTRICHT" and there are Belgian proofs on the underside of the barrel, not unusual given the city's close proximity to Belgium. The remaining metal surfaces are a mix of gray-brown and silvery case-hardened patina, the hammer and upper tang still showing some wisps of original colors. The lockplate very neatly follows the raised contours of the stock and the metal surfaces are tastefully embellished with some light foliate scrollwork. The breech and tang are both numbered "1", likely indicating this pistol once belonged to a pair and there is an assembly number "2420" on the underside of the barrel that matches a penciled number on the interior of the stock. The checkered walnut stock remains in very good plus condition showing a small smoothed-over shallow chip on the right edge, scattered light dings and handling marks but still maintains a very attractive appearance. The lock still functions crisply. Really a fine European percussion target pistol. (13B10088-22) {ANTIQUE} (1200/1800)
.44 cal, 11" octagon barrel with an oxidized bore still showing evident rifling throughout. The barrel of this attractive pistol retains perhaps 20% original blue mostly ...moretoned to a deep brown patina with moderate freckling scattered throughout. The barrel flat features silver inlay maker's mark reading "DE BEAUMONT MAESTRICHT" and there are Belgian proofs on the underside of the barrel, not unusual given the city's close proximity to Belgium. The remaining metal surfaces are a mix of gray-brown and silvery case-hardened patina, the hammer and upper tang still showing some wisps of original colors. The lockplate very neatly follows the raised contours of the stock and the metal surfaces are tastefully embellished with some light foliate scrollwork. The breech and tang are both numbered "1", likely indicating this pistol once belonged to a pair and there is an assembly number "2420" on the underside of the barrel that matches a penciled number on the interior of the stock. The checkered walnut stock remains in very good plus condition showing a small smoothed-over shallow chip on the right edge, scattered light dings and handling marks but still maintains a very attractive appearance. The lock still functions crisply. Really a fine European percussion target pistol. (13B10088-22) {ANTIQUE} (1200/1800)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 850.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Attractive British Percussion Target Pistol by Richard Hollis & Sons

Attractive British Percussion Target Pistol by Richard Hollis & Sons

Lot # 74 (Sale Order: 74 of 788)      

Low Estimate: 1,500High Estimate: 2,000
.54 cal, 9 1/2" smoothbore octagon barrel with a bright near excellent bore. This is a very nice percussion pistol featuring a lovely contrasting swirling damascus and vertical banded pattern along the barrel as well as a gold and silver band at the breech. There are some small spots of minor oxidation staining and pinprick pitting in some areas along the barrel but they are unobtrusive. The barrel flat is unmarked but there is a British proof mark on the underside. The breech and lockplate show strong remnants of case-hardened colors with areas toning to silvery gray patina; they are embellished with attractive foliate scrollwork and the lockplate is neatly inscribed "Richd Hollis & Sons" and "LONDON" with the letters interspersed between swirls of the foliate scroll. The triggerguard features an attractive pineapple finial and retains perhaps 90% original bright blue showing light flaking throughout, the ramrod tailpipe also retaining strong bright blue. The pistol is also equipped with German silver escutcheons, nosecap and oval monogram plate at the wrist. The checkered walnut stock remains in near excellent condition retaining a healthy amount of original finish and showing just a few lightly chipped points and minor dings. The pistol is equipped with a single set trigger and the lock seems to function well mechanically. A pewter-tipped ramrod with brass ferrule is included but appears to be an older replacement. A very fine British target pistol, Richard Hollis was active in Birmingham from the early to mid 1800s and appears to have passed away sometime before 1847 as an advertisement from that year shows the company reformed as Hollis Brothers & Co. (13B10088-27) {ANTIQUE} (1500/2000)
.54 cal, 9 1/2" smoothbore octagon barrel with a bright near excellent bore. This is a very nice percussion pistol featuring a lovely contrasting swirling damascus and ve...morertical banded pattern along the barrel as well as a gold and silver band at the breech. There are some small spots of minor oxidation staining and pinprick pitting in some areas along the barrel but they are unobtrusive. The barrel flat is unmarked but there is a British proof mark on the underside. The breech and lockplate show strong remnants of case-hardened colors with areas toning to silvery gray patina; they are embellished with attractive foliate scrollwork and the lockplate is neatly inscribed "Richd Hollis & Sons" and "LONDON" with the letters interspersed between swirls of the foliate scroll. The triggerguard features an attractive pineapple finial and retains perhaps 90% original bright blue showing light flaking throughout, the ramrod tailpipe also retaining strong bright blue. The pistol is also equipped with German silver escutcheons, nosecap and oval monogram plate at the wrist. The checkered walnut stock remains in near excellent condition retaining a healthy amount of original finish and showing just a few lightly chipped points and minor dings. The pistol is equipped with a single set trigger and the lock seems to function well mechanically. A pewter-tipped ramrod with brass ferrule is included but appears to be an older replacement. A very fine British target pistol, Richard Hollis was active in Birmingham from the early to mid 1800s and appears to have passed away sometime before 1847 as an advertisement from that year shows the company reformed as Hollis Brothers & Co. (13B10088-27) {ANTIQUE} (1500/2000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Stunning Custom Terry Theis Engraved Colt Single Action Army Revolver

Stunning Custom Terry Theis Engraved Colt Single Action Army Revolver

Lot # 75 (Sale Order: 75 of 788)      

Low Estimate: 4,000High Estimate: 6,000
serial #S21652A, 45 Colt, 5 1/2” barrel with a bright, unfired bore. This is an exceptional revolver boldly embellished by master engraver Terry Theis of Harper Texas. The gun retains all of its wonderful post-engraving subdued nickel finish, listed as “satin nickel” by Weldon Lister Jr., it however is much more lustrous and deep than what most people would normally consider as satin and is more of a brushed-style of texture and is extremely attractive. The arm is engraved by Theis in tight flowing intertwining scroll which Theis says was inspired by R.J. Kornbrath and Ray Viramontez, a style he worked diligently to perfect and refine while studying under Eric Boessler in Germany in the 90s. The arm is near fully covered in C-level master engraving, including the sides of the front sight and a nice acanthus band right at the muzzle. The screws, trigger, ejector rod head, base pin and base pin catch all have stunning beautiful pale and deep fire blue, the frame flat screws each with slightly engraved heads. The engraving has had very nice baked black ink accenting bringing out the quality scroll and acanthus leaf work very very nicely. Dan Chesiak has fitted a flawless one-piece ivory grip with mellow cream tones and lovely ivory grain structure. Mr. Theis has signed the piece in two spots, at the leading edge of the triggerguard just ahead of the forward screw and on the leading edge of the butt flat just ahead of its screw. The arm comes in a blue Colt Custom Shop box with white outer shipping sleeve without label. An authenticating letter from Mr. Theis is included delineating the work done on the gun and detailing the above-mentioned adornments. A simply wonderful Single Action Army, appearing very slightly reminiscent of many of Shostle’s arms, but with much more refined engraving. (3E10066-3) {MODERN} (4000/6000)
serial #S21652A, 45 Colt, 5 1/2” barrel with a bright, unfired bore. This is an exceptional revolver boldly embellished by master engraver Terry Theis of Harper Texas. Th...moree gun retains all of its wonderful post-engraving subdued nickel finish, listed as “satin nickel” by Weldon Lister Jr., it however is much more lustrous and deep than what most people would normally consider as satin and is more of a brushed-style of texture and is extremely attractive. The arm is engraved by Theis in tight flowing intertwining scroll which Theis says was inspired by R.J. Kornbrath and Ray Viramontez, a style he worked diligently to perfect and refine while studying under Eric Boessler in Germany in the 90s. The arm is near fully covered in C-level master engraving, including the sides of the front sight and a nice acanthus band right at the muzzle. The screws, trigger, ejector rod head, base pin and base pin catch all have stunning beautiful pale and deep fire blue, the frame flat screws each with slightly engraved heads. The engraving has had very nice baked black ink accenting bringing out the quality scroll and acanthus leaf work very very nicely. Dan Chesiak has fitted a flawless one-piece ivory grip with mellow cream tones and lovely ivory grain structure. Mr. Theis has signed the piece in two spots, at the leading edge of the triggerguard just ahead of the forward screw and on the leading edge of the butt flat just ahead of its screw. The arm comes in a blue Colt Custom Shop box with white outer shipping sleeve without label. An authenticating letter from Mr. Theis is included delineating the work done on the gun and detailing the above-mentioned adornments. A simply wonderful Single Action Army, appearing very slightly reminiscent of many of Shostle’s arms, but with much more refined engraving. (3E10066-3) {MODERN} (4000/6000)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Search
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 3 of 32

1.178.0.761.2502f97.11.131