Collectible Firearms & Militaria - Day 3

Collectible Firearms & Militaria - Day 3

Thursday, December 16, 2021  |  9:00 AM Eastern
Auction closed.
Collectible Firearms & Militaria - Day 3

Collectible Firearms & Militaria - Day 3

Thursday, December 16, 2021  |  9:00 AM Eastern
Auction closed.
Internet Premium: 26%
See Special Terms for additional fees
Cash Payment Discount: 3%
Share:

Description

Auction starts at 9am (EST). Items on display approximately 4 weeks prior to auction date. Please call to confirm. Our gallery is open Monday – Friday 9:00 am – 4:00 pm.

Morphy Auctions


(877) 968-8880
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 24

(A) PROFUSELY DECORATED MIDDLE EASTERN FLINTLOCK PISTOL, PROBABLY BALKAN.

Lot # 3026 (Sale Order: 26 of 582)      

11 - 3/4" round barrel with extensive damascened florals over muzzle and breach, measuring approximately 6" at breech and 2" at muzzle, with a simple gold line connector and diamond designs on the tang. Stepped lock with bridled pan and swan neck cock. Stock is decorated with extensive potmetal inlays with geometric designs and simple embossing. Trigger guard with floral and a floral finial. Buttcap with long stirrup straps. CONDITION: Good. Damascening is excellent with minimal losses, and of a later vintage than balance of gun. Barrel has a light brown patina with flashes of dove grey metal. Stock has numerous bumps, bruises, and cracks throughout. Inlaid decorations with a dark patina. Action does not work with cock not pulling back, bore is good with a minimum of oxidation. This pistol was likely made as a tourist piece and spruced up with damascened gold at a later point. EMW Barrel Length: 11 - 3/4" Caliber/Bore: .67 Caliber FFL Status: Antique Manufacturer: Balkan Model: Flintlock Serial Number: NSN
11 - 3/4" round barrel with extensive damascened florals over muzzle and breach, measuring approximately 6" at breech and 2" at muzzle, with a simple gold line connector ...moreand diamond designs on the tang. Stepped lock with bridled pan and swan neck cock. Stock is decorated with extensive potmetal inlays with geometric designs and simple embossing. Trigger guard with floral and a floral finial. Buttcap with long stirrup straps. CONDITION: Good. Damascening is excellent with minimal losses, and of a later vintage than balance of gun. Barrel has a light brown patina with flashes of dove grey metal. Stock has numerous bumps, bruises, and cracks throughout. Inlaid decorations with a dark patina. Action does not work with cock not pulling back, bore is good with a minimum of oxidation. This pistol was likely made as a tourist piece and spruced up with damascened gold at a later point. EMW Barrel Length: 11 - 3/4" Caliber/Bore: .67 Caliber FFL Status: Antique Manufacturer: Balkan Model: Flintlock Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) SWEDISH M1807 FLINTLOCK PISTOL WITH STOCK.

Lot # 3027 (Sale Order: 27 of 582)      

Round barrel marked on top "WDR O (with umlaut) L. C. No 24" (N is backwards). Barrel is retained by pins and 2 brass overstraps. Brass blade front sight V notch rear sight. Unmarked lock with swan neck cock, bridled pan. "1 M.S. No 15" engraved on trigger guard. Simple brass furniture including "L" shaped sideplate. Stock affixes to iron backstrap via a T shaped lug, and has a brass buttplate with "No 32 K". Comes with documentation attributing the WDR mark to the Vastgota Dragoon Regiment and the 1 MS No. 15 marking to the 1st Squadron of the Morner Hussars. Vastgota is best remembered as a cavalry unit unto 1811, when it was reformed as an infantry regiment. The Morner Hussars was the name used by senior light cavalry unit in the Swedish Army during the Napoleonic Wars, named in 1801 after commander Hampus Morner. They participated in several notable battles including Leipzig and Dennewitz. CONDITION: Metal has been cleaned in the European fashion with some polishing marks and spotted oxidation. Legends are somewhat softened as a result of cleaning. Stock has numerous little handling marks and bruises from an age of use, and two cracks, at sideplate and wrist. A few chips, prominent at left side of stock, right side near lock, and left stirrup. Cock does not hold on any position, bore is very good. Brass a rich untouched patina with some verdigris in a few areas. Accessories: Stock Barrel Length: 11 - 1/2" Caliber/Bore: .65 Manufacturer: Sweden Model: M1807 Paperwork: Documentation Serial Number: NSN
Round barrel marked on top "WDR O (with umlaut) L. C. No 24" (N is backwards). Barrel is retained by pins and 2 brass overstraps. Brass blade front sight V notch rear sig...moreht. Unmarked lock with swan neck cock, bridled pan. "1 M.S. No 15" engraved on trigger guard. Simple brass furniture including "L" shaped sideplate. Stock affixes to iron backstrap via a T shaped lug, and has a brass buttplate with "No 32 K". Comes with documentation attributing the WDR mark to the Vastgota Dragoon Regiment and the 1 MS No. 15 marking to the 1st Squadron of the Morner Hussars. Vastgota is best remembered as a cavalry unit unto 1811, when it was reformed as an infantry regiment. The Morner Hussars was the name used by senior light cavalry unit in the Swedish Army during the Napoleonic Wars, named in 1801 after commander Hampus Morner. They participated in several notable battles including Leipzig and Dennewitz. CONDITION: Metal has been cleaned in the European fashion with some polishing marks and spotted oxidation. Legends are somewhat softened as a result of cleaning. Stock has numerous little handling marks and bruises from an age of use, and two cracks, at sideplate and wrist. A few chips, prominent at left side of stock, right side near lock, and left stirrup. Cock does not hold on any position, bore is very good. Brass a rich untouched patina with some verdigris in a few areas. Accessories: Stock Barrel Length: 11 - 1/2" Caliber/Bore: .65 Manufacturer: Sweden Model: M1807 Paperwork: Documentation Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) WALMERODE FLINTLOCK PISTOL.

Lot # 3028 (Sale Order: 28 of 582)      

Round barrel marked "R WALMEROD" on top of barrel with sunbursts, and a Crown over I. Rounded lock with teat at rear marked "R. WALMEROD" with swan neck cock and unbridled pan. Brass tipped ramrod, probably the original, retained by a single brass ferrule and feeding into a reinforced mouth. Brass forearm cap set back approximately 3/4" from end of stock. Ramrod channel with relief carving. Brass furniture including floral sideplate, trigger guard with finial, and bulbous buttcap with stirrups. One brass pin behind relief carved tang. Trigger with curled tail. Small "AT" carved into the stock, just left of the trigger guard. Accompanied by paperwork associating the pistol with Ferdinand Franz Count Walmerode's regiment, a pre-Napoleonic cavalry regiment active in Austria circa 1700. CONDITION: Metal has even darkness with flashes of dove grey. Markings are clear. Stock is very good with a few cracks and bruises but solid. Approximately 7/8" sliver missing from right side of stock, just ahead of brass band. Brass trigger guard with split at extremity of finial. Cock shows some delamination from forging. Mechanically fine, bore is good. Barrel Length: 14" Caliber/Bore: .65 Smoothbore FFL Status: Antique Manufacturer: Walmerode Model: Flintlock Paperwork: Documentation Serial Number: NSN
Round barrel marked "R WALMEROD" on top of barrel with sunbursts, and a Crown over I. Rounded lock with teat at rear marked "R. WALMEROD" with swan neck cock and unbridle...mored pan. Brass tipped ramrod, probably the original, retained by a single brass ferrule and feeding into a reinforced mouth. Brass forearm cap set back approximately 3/4" from end of stock. Ramrod channel with relief carving. Brass furniture including floral sideplate, trigger guard with finial, and bulbous buttcap with stirrups. One brass pin behind relief carved tang. Trigger with curled tail. Small "AT" carved into the stock, just left of the trigger guard. Accompanied by paperwork associating the pistol with Ferdinand Franz Count Walmerode's regiment, a pre-Napoleonic cavalry regiment active in Austria circa 1700. CONDITION: Metal has even darkness with flashes of dove grey. Markings are clear. Stock is very good with a few cracks and bruises but solid. Approximately 7/8" sliver missing from right side of stock, just ahead of brass band. Brass trigger guard with split at extremity of finial. Cock shows some delamination from forging. Mechanically fine, bore is good. Barrel Length: 14" Caliber/Bore: .65 Smoothbore FFL Status: Antique Manufacturer: Walmerode Model: Flintlock Paperwork: Documentation Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

(A) DANISH M1748 FLINTLOCK HUSSAR PISTOL.

Lot # 3029 (Sale Order: 29 of 582)      

Round iron barrel with brass blade front sight, signed on left side with "No 5 E" (5 and E are indistinct and may have originally had additional characters, No is clear and in the style known on Danish pistols). Offset inverted "HS" proof in lozenge, while top of barrel with Frederick V royal cypher, and "12", probably a rack number as it is repeated throughout the pistol. Rounded banana lock with bevelled edges and teat at rear with IPK lozenge for Johan Peter Kreilow (Helsingor, Denmark, circa 1760-1788) visible under frizzen spring. With the combination of Kreilow's working dates and Frederick's death, this pistol can be comfortably dated between 1760 and 1766. Swan neck cock and unbridled pan. Tailed trigger with brass trigger guard with light engraving and arrowhead finial. Iron tipped ramrod, probably the original, retained by a single ferrule feeding into a reinforced mouth with light line engraving. Distinct birdshead grip with brass buttcap marked "12", brass thumbpiece of Frederick V monogram, serpentine sideplate with "12" in brass and "12" stamp repeated in wood. CONDITION: Excellent, as found, with a wonderful look. Metal looks to have been cleaned once in the European style long ago with some areas of darkness. Legends are crisp (excepting the 5 E proof aforementioned), particularly the Kreilow proof. Some minor delamination in the metal that does not detract on lock and cock. Wood is excellent with some marks from handling and use, with some rubbing to the finish to lighter wood. Right side of stock with a small crack. EMW Barrel Length: 13" Caliber/Bore: .68 Smoothbore FFL Status: Antique Manufacturer: Danish Model: M1748 Paperwork: Documentation Serial Number: NSN
Round iron barrel with brass blade front sight, signed on left side with "No 5 E" (5 and E are indistinct and may have originally had additional characters, No is clear a...morend in the style known on Danish pistols). Offset inverted "HS" proof in lozenge, while top of barrel with Frederick V royal cypher, and "12", probably a rack number as it is repeated throughout the pistol. Rounded banana lock with bevelled edges and teat at rear with IPK lozenge for Johan Peter Kreilow (Helsingor, Denmark, circa 1760-1788) visible under frizzen spring. With the combination of Kreilow's working dates and Frederick's death, this pistol can be comfortably dated between 1760 and 1766. Swan neck cock and unbridled pan. Tailed trigger with brass trigger guard with light engraving and arrowhead finial. Iron tipped ramrod, probably the original, retained by a single ferrule feeding into a reinforced mouth with light line engraving. Distinct birdshead grip with brass buttcap marked "12", brass thumbpiece of Frederick V monogram, serpentine sideplate with "12" in brass and "12" stamp repeated in wood. CONDITION: Excellent, as found, with a wonderful look. Metal looks to have been cleaned once in the European style long ago with some areas of darkness. Legends are crisp (excepting the 5 E proof aforementioned), particularly the Kreilow proof. Some minor delamination in the metal that does not detract on lock and cock. Wood is excellent with some marks from handling and use, with some rubbing to the finish to lighter wood. Right side of stock with a small crack. EMW Barrel Length: 13" Caliber/Bore: .68 Smoothbore FFL Status: Antique Manufacturer: Danish Model: M1748 Paperwork: Documentation Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) BRASS BARRELED PISTOL, PROBABLY FRENCH, SIGNED ON LOCK "G. DELILEL (?)"

Lot # 3030 (Sale Order: 30 of 582)      

Maker not identified in Stockel but form of pistol suggests a French origin. Octagonal to round barrel with wedding rings at girdle. Blade front sight is slightly offset. Rounded bevelled lock is signed under the frizzen spring "G. Delilel" (?, difficult to read). Swan neck cock with light floral engraving, bridled pan. Trumpet ramrod, unlikely to be to the original as the diameter is too large to fit down the barrel, feeds into a reinforced mouth. Horn forend cap. Tang with a raised shell motif carving. Trigger guard with flat bottom profile before transitioning to an elliptical forepiece that leads to an acorn finial. Flat profile of trigger guard engraved with simple florals. Birdshead butt with iron butt engraved en suite. Single piece stock with drop points behind locks. CONDITION: Brass barrel has acquired a rich brown/red patina with flashes of brass still showing at the edges. Lock has been cleaned in the center with visible polishing marks and some spots of oxidation, with a chocolate patina at rear. Butt and trigger guard furniture with an even chocolate patina with some flashes of dove grey. Stock has bumps and bruises throughout from use, with one noticeable area of marks on right side of wrist and one crack that runs from left sidepanel near rear screw through wrist and to right side of tang, near breech, and a much smaller crack behind lock; both cracks appear stable. Mechanically fine, bore is good with a minimum of oxidation. EMW Barrel Length: 4 - 1/2" Caliber/Bore: .47 Smoothbore FFL Status: Antique Manufacturer: French Model: Officer Serial Number: NSN
Maker not identified in Stockel but form of pistol suggests a French origin. Octagonal to round barrel with wedding rings at girdle. Blade front sight is slightly offset....more Rounded bevelled lock is signed under the frizzen spring "G. Delilel" (?, difficult to read). Swan neck cock with light floral engraving, bridled pan. Trumpet ramrod, unlikely to be to the original as the diameter is too large to fit down the barrel, feeds into a reinforced mouth. Horn forend cap. Tang with a raised shell motif carving. Trigger guard with flat bottom profile before transitioning to an elliptical forepiece that leads to an acorn finial. Flat profile of trigger guard engraved with simple florals. Birdshead butt with iron butt engraved en suite. Single piece stock with drop points behind locks. CONDITION: Brass barrel has acquired a rich brown/red patina with flashes of brass still showing at the edges. Lock has been cleaned in the center with visible polishing marks and some spots of oxidation, with a chocolate patina at rear. Butt and trigger guard furniture with an even chocolate patina with some flashes of dove grey. Stock has bumps and bruises throughout from use, with one noticeable area of marks on right side of wrist and one crack that runs from left sidepanel near rear screw through wrist and to right side of tang, near breech, and a much smaller crack behind lock; both cracks appear stable. Mechanically fine, bore is good with a minimum of oxidation. EMW Barrel Length: 4 - 1/2" Caliber/Bore: .47 Smoothbore FFL Status: Antique Manufacturer: French Model: Officer Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 375.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) A GOOD, EARLY, PROBABLY ENGLISH FLINTLOCK BLUNDERBUSS IN AN UNUSUALLY LARGE SIZE.

Lot # 3031 (Sale Order: 31 of 582)      

Unmarked but for a small "1791 (?, may be 1797). Brass octagonal to round barrel with pair of wedding rings at girdle, and 2 additional bands at the bell, which measures an unusually large approximate 2". Barrel retained by pins. Horn tipped ramrod retained by a single faceted ferrule that feeds into a single faceted mouth, both of which are decorated with rings. Brass trigger guard attached to an iron bottom strap with finger grooves. Brass buttplate. Buttstock is lightly fiddle figured. Stock has approximately half a dozen fine hairline cracks, with more towards the muzzle cap. Brass has a very pleasing deep mustard patina, with one spot on cleaned area of right side, approximately halfway down the round section. Lock has some minor fine pitting with a protective layer of lacquer. Brass buttplate has a small split at top that was period repaired with a screw. Action works appropriately when cycled by hand, bore is excellent. This is a very attractive example. EMW Barrel Length: 21 - 1/2" FFL Status: Antique Gauge: 2" Smoothbore Manufacturer: English Model: Blunderbuss Serial Number: NSN
Unmarked but for a small "1791 (?, may be 1797). Brass octagonal to round barrel with pair of wedding rings at girdle, and 2 additional bands at the bell, which measures ...morean unusually large approximate 2". Barrel retained by pins. Horn tipped ramrod retained by a single faceted ferrule that feeds into a single faceted mouth, both of which are decorated with rings. Brass trigger guard attached to an iron bottom strap with finger grooves. Brass buttplate. Buttstock is lightly fiddle figured. Stock has approximately half a dozen fine hairline cracks, with more towards the muzzle cap. Brass has a very pleasing deep mustard patina, with one spot on cleaned area of right side, approximately halfway down the round section. Lock has some minor fine pitting with a protective layer of lacquer. Brass buttplate has a small split at top that was period repaired with a screw. Action works appropriately when cycled by hand, bore is excellent. This is a very attractive example. EMW Barrel Length: 21 - 1/2" FFL Status: Antique Gauge: 2" Smoothbore Manufacturer: English Model: Blunderbuss Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,900.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) BRITISH BLUNDERBUSS FLINTLOCK SHOTGUN.

Lot # 3032 (Sale Order: 32 of 582)      

Iron barrel with British private proofs visible on the upper left side of the breech with decorative bands at rear. Plain lock with unbridled frizzen, swan neck cock, roller bearing frizzen. Cock has light border line engraving. There is what appears to be a small "T" above the frizzen spring screw. Stock mortise is precisely cut for lock. Ramrod, probably the original, feeds into a reinforced mouth through a single ferrule with a widened mouth. Trigger guard and buttplate are plain brass. CONDITION: Very good. Metal has been cleaned in the European style over some spotting, with softening to proofs as mentioned above. Lock has also been cleaned. and cock is a possible replacement. Stock with numerous bumps and chips and one crack that runs from end of stock to side of mouth. Action works appropriately when cycled by hand, bore is good with a minimum of oxidation. Barrel Length: 15" FFL Status: Antique Gauge: 1 - 1/2" at bell Manufacturer: British Model: Blunderbuss Serial Number: NSN
Iron barrel with British private proofs visible on the upper left side of the breech with decorative bands at rear. Plain lock with unbridled frizzen, swan neck cock, rol...moreler bearing frizzen. Cock has light border line engraving. There is what appears to be a small "T" above the frizzen spring screw. Stock mortise is precisely cut for lock. Ramrod, probably the original, feeds into a reinforced mouth through a single ferrule with a widened mouth. Trigger guard and buttplate are plain brass. CONDITION: Very good. Metal has been cleaned in the European style over some spotting, with softening to proofs as mentioned above. Lock has also been cleaned. and cock is a possible replacement. Stock with numerous bumps and chips and one crack that runs from end of stock to side of mouth. Action works appropriately when cycled by hand, bore is good with a minimum of oxidation. Barrel Length: 15" FFL Status: Antique Gauge: 1 - 1/2" at bell Manufacturer: British Model: Blunderbuss Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) BRASS BARRELED IRISH BLUNDERBUSS BY TOMLINSON AND REGISTERED IN DUBLIN CITY.

Lot # 3033 (Sale Order: 33 of 582)      

Robert Tomlinson is recorded as working in Dublin circa 1805 at 123 Capel Street. Octagonal to round barrel separated by a wedding ring at girdle and marked with "(Crown) / P", "RT" in a lozenge, and "(Crown) / V" proofs on offset octagonal flat and "DC - 675" on top flat, indicating registration in Dublin City post-1843. Simple stepped lock with teat at rear marked "TOMLINSON" in center, with swan neck cock and bridled pan. Barrel flares to approximately 1 - 3/8" at muzzle and is separated from main tube portion by a raised ring at girdle and further cannon turned at muzzle. Horn tipped ramrod, probably the original, with worm at reverse, retained by a single ferrule with raised edges and feeding into a reinforced mouth. Wide brass trigger guard with raised edges and an acorn finial. Brass buttplate retained by a pair of iron screws. CONDITION: Very good as found condition. Lock is an untouched chocolate patina, with Tomlinson marking somewhat obscured. Brass is a deep rich untouched color with some verdigris forming. Stock is very good with some bumps and bruises throughout, and one large spliced repair at toe. Buttplate has a consistent layer of verdigris and screws are patinated. Mechanically fine, bore is excellent. Irish guns are rare and this blunderbuss is a great example. EMW Barrel Length: 14 - 3/8" FFL Status: Antique Gauge: 1 - 3/8" at Bell Manufacturer: Tomlinson Model: Blunderbuss Serial Number: NSN
Robert Tomlinson is recorded as working in Dublin circa 1805 at 123 Capel Street. Octagonal to round barrel separated by a wedding ring at girdle and marked with "(Crown)...more / P", "RT" in a lozenge, and "(Crown) / V" proofs on offset octagonal flat and "DC - 675" on top flat, indicating registration in Dublin City post-1843. Simple stepped lock with teat at rear marked "TOMLINSON" in center, with swan neck cock and bridled pan. Barrel flares to approximately 1 - 3/8" at muzzle and is separated from main tube portion by a raised ring at girdle and further cannon turned at muzzle. Horn tipped ramrod, probably the original, with worm at reverse, retained by a single ferrule with raised edges and feeding into a reinforced mouth. Wide brass trigger guard with raised edges and an acorn finial. Brass buttplate retained by a pair of iron screws. CONDITION: Very good as found condition. Lock is an untouched chocolate patina, with Tomlinson marking somewhat obscured. Brass is a deep rich untouched color with some verdigris forming. Stock is very good with some bumps and bruises throughout, and one large spliced repair at toe. Buttplate has a consistent layer of verdigris and screws are patinated. Mechanically fine, bore is excellent. Irish guns are rare and this blunderbuss is a great example. EMW Barrel Length: 14 - 3/8" FFL Status: Antique Gauge: 1 - 3/8" at Bell Manufacturer: Tomlinson Model: Blunderbuss Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) A VERY RARE BRASS BARRELED FLINTLOCK BLUNDERBUSS BY BARBER.

Lot # 3034 (Sale Order: 34 of 582)      

3 stage brass barrel with wedding rings at girdles and an additional ring approximately 1 - 3/4" behind flared cannon muzzle, which measures approximately 1" across at bell. Light engraving over breech, and hand engraved "LONDON". Private Tower proof marks consisting of a pair of crowns over crossed scepters. Flat iron lock marked "BARBER" in center with waterproof pan, tailed pan cover, and swan neck cock. Cock and lock engraved with light lined borders and offshoots en suite with barrel. Brass sideplate with with light floral engraving. Iron tang with light floral engraving en suite with lock and barrel, with shell finial at rear, with raised wood around tang. Brass tipped ramrod, probably the original, retained by a single ferrule and feeding into a reinforced mouth with simple finial. Brass trigger guard with floral fore finial, engraving of flower on trigger guard, and hatched floral finial at rear. Brass plaque at wrist with shell motif at top, unengraved. Brass buttplate with long topstrap engraved en suite. CONDITION: Very good. Brass has some minor handling marks and small superficial pings that do not detract, with easily readable legends. Lock is very good with crisp engraving and markings, and a smooth patina with flashes of dove grey. Brass furniture is very good with a light patina, ramrod mouth darker than balance. Stock is very good, with evidence of having been gently sanded and revarnished with some wood being shiny and visible patterns from the applicator. One noticeable crack on the left side ahead of the sideplate, approximately 5", but it appears stable. Action functions as it should, bore is very good with a minimum of oxidation. This is a very attractive example of a popular weapon by a top maker. EMW Barrel Length: 15 - 1/4" FFL Status: Antique Gauge: 1" at bell Manufacturer: Barber Model: Blunderbuss Serial Number: NSN
3 stage brass barrel with wedding rings at girdles and an additional ring approximately 1 - 3/4" behind flared cannon muzzle, which measures approximately 1" across at be...morell. Light engraving over breech, and hand engraved "LONDON". Private Tower proof marks consisting of a pair of crowns over crossed scepters. Flat iron lock marked "BARBER" in center with waterproof pan, tailed pan cover, and swan neck cock. Cock and lock engraved with light lined borders and offshoots en suite with barrel. Brass sideplate with with light floral engraving. Iron tang with light floral engraving en suite with lock and barrel, with shell finial at rear, with raised wood around tang. Brass tipped ramrod, probably the original, retained by a single ferrule and feeding into a reinforced mouth with simple finial. Brass trigger guard with floral fore finial, engraving of flower on trigger guard, and hatched floral finial at rear. Brass plaque at wrist with shell motif at top, unengraved. Brass buttplate with long topstrap engraved en suite. CONDITION: Very good. Brass has some minor handling marks and small superficial pings that do not detract, with easily readable legends. Lock is very good with crisp engraving and markings, and a smooth patina with flashes of dove grey. Brass furniture is very good with a light patina, ramrod mouth darker than balance. Stock is very good, with evidence of having been gently sanded and revarnished with some wood being shiny and visible patterns from the applicator. One noticeable crack on the left side ahead of the sideplate, approximately 5", but it appears stable. Action functions as it should, bore is very good with a minimum of oxidation. This is a very attractive example of a popular weapon by a top maker. EMW Barrel Length: 15 - 1/4" FFL Status: Antique Gauge: 1" at bell Manufacturer: Barber Model: Blunderbuss Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) HIGHLY DECORATED OTTOMAN FLINTLOCK KNEE GUN, WITH EXTENSIVE CARVING AND SILVER WIRE INLAY.

Lot # 3035 (Sale Order: 35 of 582)      

These short firearms were used either from horseback or while on one knee, leading to their name. This example, with partial-round-slabsided to round barrel, measures 1 - 1/2" at the bell/ Barrel has been extensively inlaid with silver in what appear to be floral designs; 4 designs over breech measuring approximately 4", with a central line leading to muzzle where it expands to envelop muzzle, approximately 2 - 1/2" from the bell. Flat lock with bridled frizzen, swan neck cock, and faceted pan inlaid with silver en suite with barrel. Stock with numerous areas of incised and relief carving of geometrics, toe line with a depiction of a rather angry looking goat. Wrist and butt with basketweave checkering. Sling bar with ring mounted on left side of stock, opposite lock. CONDITION: Good. Barrel has been polished in the European fashion some time ago, with spotted darkness and tarnished silver. Stock is good with silver inlay tarnished throughout and numerous bumps, cracks and chips, and one noticeable repair at toe where chip was reaffixed with a nail. Frizzen is loose and cock does not catch on half or full. Bore is very good with some even oxidation throughout. While mechanically dubious, this is an aesthetically pleasing and highly decorated example of the quintessential Middle Eastern firearm. EMW Barrel Length: 11 - 1/4" FFL Status: Antique Gauge: 1.5" at muzzle Manufacturer: Ottoman Model: Knee Gun Serial Number: NSN
These short firearms were used either from horseback or while on one knee, leading to their name. This example, with partial-round-slabsided to round barrel, measures 1 -...more 1/2" at the bell/ Barrel has been extensively inlaid with silver in what appear to be floral designs; 4 designs over breech measuring approximately 4", with a central line leading to muzzle where it expands to envelop muzzle, approximately 2 - 1/2" from the bell. Flat lock with bridled frizzen, swan neck cock, and faceted pan inlaid with silver en suite with barrel. Stock with numerous areas of incised and relief carving of geometrics, toe line with a depiction of a rather angry looking goat. Wrist and butt with basketweave checkering. Sling bar with ring mounted on left side of stock, opposite lock. CONDITION: Good. Barrel has been polished in the European fashion some time ago, with spotted darkness and tarnished silver. Stock is good with silver inlay tarnished throughout and numerous bumps, cracks and chips, and one noticeable repair at toe where chip was reaffixed with a nail. Frizzen is loose and cock does not catch on half or full. Bore is very good with some even oxidation throughout. While mechanically dubious, this is an aesthetically pleasing and highly decorated example of the quintessential Middle Eastern firearm. EMW Barrel Length: 11 - 1/4" FFL Status: Antique Gauge: 1.5" at muzzle Manufacturer: Ottoman Model: Knee Gun Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) A GOOD IRON BARRELED BLUNDERBUSS WITH SPRING LOADED BAYONET, BRITISH ORDNANCE MARKS, CONVERTED T

Lot # 3036 (Sale Order: 36 of 582)      

Three stage iron barrel, retained by 2 keys, with an octagonal first stage with reversed flats that create a look that is reminiscent of steeple fluting, with round second and third stages separated by wedding rings at the girdles. Third wedding ring located approximately 2 - 1/4" behind the flared turned cannon muzzle. Additionally, there is a socket for spring loaded bayonet and a catch for locking the bayonet in place approximately 1 - 3/4" behind muzzle. Offset private Tower proofs. This barrel was originally in flintlock and was converted to percussion via a drum. Lock is unmarked and decorated with sparse floral scroll engraving; fishform hammer engraved en suite. Lock appears to have also been a flint lock at one point with original evidence of flintlock parts visible. Brass tipped trumpet ramrod, possibly the original as it is the right length, feeds directly into a reinforced mouth decorated with rays. Brass trigger guard is engraved with florals along the long tang and guard, before turning into an acorn finial. Brass buttplate with engraved top strap en suite with trigger guard; bottom screw is missing. Stock is very good and a more modern restock with checking at wrist. A strap has been added to prevent that bayonet from slipping its confines and stabbing an unintended target. CONDITION: Good. Iron barrel and lock has acquired a rich patina throughout, with some pitting around drum from use; barrel has had a layer of lacquer applied at one point as the color is not quite right. Brass is very good with crisp engraving and is a rich mustard patina. Stock is very good with some handling marks and dings throughout, and a few tight cracks towards butt. Checkering is razor sharp. Mechanically fine (one barrel wedge is broken), bayonet catches appropriately and firmly, and bore is very good with a minimum of oxidation. Most blunderbusses are seen with brass barrels to avoid corrosion at sea, making iron survivors fairly rare and desirable. EMW Barrel Length: 14" FFL Status: Antique Gauge: 1 - 1/2" at bell Manufacturer: British Model: Blunderbuss Serial Number: NSN
Three stage iron barrel, retained by 2 keys, with an octagonal first stage with reversed flats that create a look that is reminiscent of steeple fluting, with round secon...mored and third stages separated by wedding rings at the girdles. Third wedding ring located approximately 2 - 1/4" behind the flared turned cannon muzzle. Additionally, there is a socket for spring loaded bayonet and a catch for locking the bayonet in place approximately 1 - 3/4" behind muzzle. Offset private Tower proofs. This barrel was originally in flintlock and was converted to percussion via a drum. Lock is unmarked and decorated with sparse floral scroll engraving; fishform hammer engraved en suite. Lock appears to have also been a flint lock at one point with original evidence of flintlock parts visible. Brass tipped trumpet ramrod, possibly the original as it is the right length, feeds directly into a reinforced mouth decorated with rays. Brass trigger guard is engraved with florals along the long tang and guard, before turning into an acorn finial. Brass buttplate with engraved top strap en suite with trigger guard; bottom screw is missing. Stock is very good and a more modern restock with checking at wrist. A strap has been added to prevent that bayonet from slipping its confines and stabbing an unintended target. CONDITION: Good. Iron barrel and lock has acquired a rich patina throughout, with some pitting around drum from use; barrel has had a layer of lacquer applied at one point as the color is not quite right. Brass is very good with crisp engraving and is a rich mustard patina. Stock is very good with some handling marks and dings throughout, and a few tight cracks towards butt. Checkering is razor sharp. Mechanically fine (one barrel wedge is broken), bayonet catches appropriately and firmly, and bore is very good with a minimum of oxidation. Most blunderbusses are seen with brass barrels to avoid corrosion at sea, making iron survivors fairly rare and desirable. EMW Barrel Length: 14" FFL Status: Antique Gauge: 1 - 1/2" at bell Manufacturer: British Model: Blunderbuss Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,700.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) THOMAS CONWAY PERCUSSION MUFF PISTOL.

Lot # 3037 (Sale Order: 37 of 582)      

Thomas Conway is recorded at Manchester circa 1803-1869. Damascus octagonal barrel with mushroom front sight, notch rear sight mounted to action. Lined engraving at muzzle. Birmingham proofs visible on lower left side of barrel, repeated on the action. Patent breech. German silver boxlock action and ramrod channel; boxlock action with open scroll engraving and signed on top "CONWAY / MANCHESTER". Fishform hammer with scroll engraving en suite. Ramrod with flat head probably the original, given that it fits correctly into the channel. Folding trigger mechanism with floral engraving around trigger. Bag grip with wave checkering with vacant space at wrist with silver lozenge for initials, unengraved. CONDITION: Barrel has been cleaned in the European style over some old oxidation, with dark spotting remaining; Damascus twist still nicely visible. Some tarnishing to German silver in protected areas. Engraving is crisp throughout. Fishform hammer has some flashes of case color visible on rear where it would have been protected by the frame when resting on the nipple. Recoil shield on hammer is damaged with front damaged and spots of oxidation on nipple and cock. Stock is very good with some bumps and bruises throughout but free of cracks or chips; some heads abraded. Mechanically fine, bore is good with a minimum of oxidation. A nice example. EMW Barrel Length: 4" Caliber/Bore: .48 Percussion FFL Status: Antique Manufacturer: Conway Manchester Model: Percussion Pistol Serial Number: NSN
Thomas Conway is recorded at Manchester circa 1803-1869. Damascus octagonal barrel with mushroom front sight, notch rear sight mounted to action. Lined engraving at muzzl...moree. Birmingham proofs visible on lower left side of barrel, repeated on the action. Patent breech. German silver boxlock action and ramrod channel; boxlock action with open scroll engraving and signed on top "CONWAY / MANCHESTER". Fishform hammer with scroll engraving en suite. Ramrod with flat head probably the original, given that it fits correctly into the channel. Folding trigger mechanism with floral engraving around trigger. Bag grip with wave checkering with vacant space at wrist with silver lozenge for initials, unengraved. CONDITION: Barrel has been cleaned in the European style over some old oxidation, with dark spotting remaining; Damascus twist still nicely visible. Some tarnishing to German silver in protected areas. Engraving is crisp throughout. Fishform hammer has some flashes of case color visible on rear where it would have been protected by the frame when resting on the nipple. Recoil shield on hammer is damaged with front damaged and spots of oxidation on nipple and cock. Stock is very good with some bumps and bruises throughout but free of cracks or chips; some heads abraded. Mechanically fine, bore is good with a minimum of oxidation. A nice example. EMW Barrel Length: 4" Caliber/Bore: .48 Percussion FFL Status: Antique Manufacturer: Conway Manchester Model: Percussion Pistol Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 375.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) CASED PAIR OF ALLEN'S PATENT SINGLE SHOT PERCUSSION PISTOLS.

Lot # 3038 (Sale Order: 38 of 582)      

Matched pair of pistols with octagonal to round barrels with a matted wedding ring at girdle and marked" PATENTED" "1837" "CAST STEEL" on adjacent flats, bottom flat marked with serial numbers. Hammer marked "ALLENS PATENT". Round body actions with spare scroll engraving; backstrap with light beaded decoration. Two piece stocks with central retaining screw. Mainspring screws are sticking out of the front strap, normally seen on these pistols. Housed in a clever little case with purple diamond hatch velvet and fitted to hold both pistols vertically, a number of projectiles, key, small leather pouch, a powder flask with repoussé design, and a combination bullet mold and barrel wrench. CONDITION: Very good, both pistols have a smooth chocolate patina on the metal with some normal handling marks from an age of use. Octagonal sections of barrels have some silvering from an aggressive use of the barrel wrench to try to free frozen barrels. Stocks are very good with normal handling marks and impressions throughout. Mechanically fine, bores are good with strong rifling and some even oxidation. Case is good with some areas of softening from items being in place, accessories are very good with some marks from handling and use commensurate with guns. A neat case that would have allowed the owner to pack numerous items for self defense is a reasonably compact package. EMW Accessories: Case Barrel Length: (Both) 3" Caliber/Bore: (Both) .36 Rifled FFL Status: Antique Manufacturer: (Both) Allen Model: (BOTH) Percussion Serial Number: (A) 115 (B) 122
Matched pair of pistols with octagonal to round barrels with a matted wedding ring at girdle and marked" PATENTED" "1837" "CAST STEEL" on adjacent flats, bottom flat mark...moreed with serial numbers. Hammer marked "ALLENS PATENT". Round body actions with spare scroll engraving; backstrap with light beaded decoration. Two piece stocks with central retaining screw. Mainspring screws are sticking out of the front strap, normally seen on these pistols. Housed in a clever little case with purple diamond hatch velvet and fitted to hold both pistols vertically, a number of projectiles, key, small leather pouch, a powder flask with repoussé design, and a combination bullet mold and barrel wrench. CONDITION: Very good, both pistols have a smooth chocolate patina on the metal with some normal handling marks from an age of use. Octagonal sections of barrels have some silvering from an aggressive use of the barrel wrench to try to free frozen barrels. Stocks are very good with normal handling marks and impressions throughout. Mechanically fine, bores are good with strong rifling and some even oxidation. Case is good with some areas of softening from items being in place, accessories are very good with some marks from handling and use commensurate with guns. A neat case that would have allowed the owner to pack numerous items for self defense is a reasonably compact package. EMW Accessories: Case Barrel Length: (Both) 3" Caliber/Bore: (Both) .36 Rifled FFL Status: Antique Manufacturer: (Both) Allen Model: (BOTH) Percussion Serial Number: (A) 115 (B) 122

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,100.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) PAIR OF BELGIAN MUFF PERCUSSION PISTOLS.

Lot # 3039 (Sale Order: 39 of 582)      

Pair of Belgian muff pistols with screw off barrels, folding triggers, composite stocks, fine microgroove rifling. Dolphin form hammers. Lightly engraved with scroll. Butt with trap for caps, trap decorated with a grotesque. Barrels have notches in muzzle to assist in barrel removal. Belgian proofs and a faint "15" are visible on frames. Housed in a contemporary leather case with maroon lining with pull top that hides 2 additional compartments, vacant. CONDITION: Metal has been cleaned in the European fashion over some minor oxidation with marks from handling and storage throughout. One pistol has been damage at the cock with screw broken and at base of cock. Both pistols have dark barrels with no visible rifling and neither trigger deploys nor do cocks hold. Stocks are good with some age related coloration and a few bumps and nicks. Case is fine as associated. EMW Accessories: Case Barrel Length: (BOTH) 2 - 1/8" Caliber/Bore: (BOTH) .30 Rifled FFL Status: Antique Manufacturer: (BOTH) Belgian Model: (BOTH) Muff Serial Number: (BOTH) NSN
Pair of Belgian muff pistols with screw off barrels, folding triggers, composite stocks, fine microgroove rifling. Dolphin form hammers. Lightly engraved with scroll. But...moret with trap for caps, trap decorated with a grotesque. Barrels have notches in muzzle to assist in barrel removal. Belgian proofs and a faint "15" are visible on frames. Housed in a contemporary leather case with maroon lining with pull top that hides 2 additional compartments, vacant. CONDITION: Metal has been cleaned in the European fashion over some minor oxidation with marks from handling and storage throughout. One pistol has been damage at the cock with screw broken and at base of cock. Both pistols have dark barrels with no visible rifling and neither trigger deploys nor do cocks hold. Stocks are good with some age related coloration and a few bumps and nicks. Case is fine as associated. EMW Accessories: Case Barrel Length: (BOTH) 2 - 1/8" Caliber/Bore: (BOTH) .30 Rifled FFL Status: Antique Manufacturer: (BOTH) Belgian Model: (BOTH) Muff Serial Number: (BOTH) NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 650.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) PAIR OF BELGIAN PERCUSSION PISTOLS.

Lot # 3040 (Sale Order: 40 of 582)      

Pair of Belgian percussion target/dueling pistols made in Liege, Belgium circa 1850. Both have 9 -3/8" octagon twist steel barrels with 12 groove rifling, bead front sight and notch rear sight with patent breech ignition system, engraved percussion locks with adjustable single trigger control. Walnut grooved stocks with steel engraved grip caps floral carved forearms and floral engraved steel finger spur trigger guards. CONDITION: Overall good with silvery patina metal surfaces. Wood has traces of original finish with handling marks and dings with shootable bores and good mechanics. DLM Barrel Length: (BOTH) 9 - 3/8" Caliber/Bore: (BOTH) .52 Rifled FFL Status: Antique Manufacturer: (BOTH) Belgian Model: (BOTH) Parlor Pistol Serial Number: (BOTH) NSN
Pair of Belgian percussion target/dueling pistols made in Liege, Belgium circa 1850. Both have 9 -3/8" octagon twist steel barrels with 12 groove rifling, bead front sigh...moret and notch rear sight with patent breech ignition system, engraved percussion locks with adjustable single trigger control. Walnut grooved stocks with steel engraved grip caps floral carved forearms and floral engraved steel finger spur trigger guards. CONDITION: Overall good with silvery patina metal surfaces. Wood has traces of original finish with handling marks and dings with shootable bores and good mechanics. DLM Barrel Length: (BOTH) 9 - 3/8" Caliber/Bore: (BOTH) .52 Rifled FFL Status: Antique Manufacturer: (BOTH) Belgian Model: (BOTH) Parlor Pistol Serial Number: (BOTH) NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) PAIR OF JOSEPH LANG PERCUSSION BELT PISTOLS.

Lot # 3041 (Sale Order: 41 of 582)      

Matched pair of carbine bore boxlock belt pistols. Matching features include diminutive mushroom front sight, notch rear sight mounted to frame, Lang's Haymarket address across top of octagonal barrels, captured swivel ramrod, Damascus barrels, belt hook (hook on pistol B broken), English style push on safety, sidepanels, vacant shields at wrist, and point-and-wave checkered bag grips with cap in butt for caps. British view and proof marks visible on lower left side of turn off barrels and breech, and marked "0" and "1" on each pistol's lower right barrel and frame. Patent breeches, with barrels visibly ever so slightly off of breeches. Tastefully engraved with florals and bordered geometrics throughout. CONDITION: Very good. Metal has some staining throughout and some very minor spots of oxidation. Belt hook on second pistol is broken at frame. Grips are very good with some bumps and bruises commensurate with use, some checkering heads abraded. Mechanically functional, but push on safeties are gummy and may need to be cleaned to function 100%. Cock on pistol (A) is replaced with a well crafted facsimile, possibly period. Bores are good, smooth, with a minimum of oxidation. A nice pair of large caliber belt pistols. EMW Barrel Length: (BOTH) 6" Caliber/Bore: (BOTH) 16 Bore FFL Status: Antique Manufacturer: (BOTH) Lang Model: (BOTH) Muff Serial Number: (BOTH) NSN
Matched pair of carbine bore boxlock belt pistols. Matching features include diminutive mushroom front sight, notch rear sight mounted to frame, Lang's Haymarket address ...moreacross top of octagonal barrels, captured swivel ramrod, Damascus barrels, belt hook (hook on pistol B broken), English style push on safety, sidepanels, vacant shields at wrist, and point-and-wave checkered bag grips with cap in butt for caps. British view and proof marks visible on lower left side of turn off barrels and breech, and marked "0" and "1" on each pistol's lower right barrel and frame. Patent breeches, with barrels visibly ever so slightly off of breeches. Tastefully engraved with florals and bordered geometrics throughout. CONDITION: Very good. Metal has some staining throughout and some very minor spots of oxidation. Belt hook on second pistol is broken at frame. Grips are very good with some bumps and bruises commensurate with use, some checkering heads abraded. Mechanically functional, but push on safeties are gummy and may need to be cleaned to function 100%. Cock on pistol (A) is replaced with a well crafted facsimile, possibly period. Bores are good, smooth, with a minimum of oxidation. A nice pair of large caliber belt pistols. EMW Barrel Length: (BOTH) 6" Caliber/Bore: (BOTH) 16 Bore FFL Status: Antique Manufacturer: (BOTH) Lang Model: (BOTH) Muff Serial Number: (BOTH) NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) LOT OF 2: PAIR OF FRENCH MODEL 1837 PERCUSSION PISTOLS.

Lot # 3042 (Sale Order: 42 of 582)      

Lot consists of a classic pair of French maritime pistols. Standard configuration with round barrels mounted with a captive swivel ramrod, belt hooks, back action percussion locks, brass furniture, rotatable lanyard loops, and normal proofs throughout. Pistol (A) marked for manufactured at Chatellerault, with 1319 assembly number ahead of nipple, (B) for Tulle, dated 1842 on right side of breech. CONDITION: Very good. (A) has had barrel cleaned in the European fashion over some scattered darkness. Brass has a deep mustard patina. Wood has numerous handling and usage marks throughout, with a crack on right side of the tang, partially hidden by cock. Mechanically fine, bore has some oxidation throughout. (B) barrel also cleaned in the European fashion with some scattered darkness, with cock having more noticeable areas of oxidation. Brass with a deep mustard patina. Wood has numerous handling marks and a few chips but free of cracks. Mechanically fine, bore has even oxidation throughout. A nice pair of French naval pistols. EMW Barrel Length: (BOTH) 6" Caliber/Bore: (BOTH) .60 Smoothbore FFL Status: Antique Manufacturer: (A) Chatellerault (B) Tulle Model: (BOTH) 1837 Serial Number: (BOTH) NSN
Lot consists of a classic pair of French maritime pistols. Standard configuration with round barrels mounted with a captive swivel ramrod, belt hooks, back action percuss...moreion locks, brass furniture, rotatable lanyard loops, and normal proofs throughout. Pistol (A) marked for manufactured at Chatellerault, with 1319 assembly number ahead of nipple, (B) for Tulle, dated 1842 on right side of breech. CONDITION: Very good. (A) has had barrel cleaned in the European fashion over some scattered darkness. Brass has a deep mustard patina. Wood has numerous handling and usage marks throughout, with a crack on right side of the tang, partially hidden by cock. Mechanically fine, bore has some oxidation throughout. (B) barrel also cleaned in the European fashion with some scattered darkness, with cock having more noticeable areas of oxidation. Brass with a deep mustard patina. Wood has numerous handling marks and a few chips but free of cracks. Mechanically fine, bore has even oxidation throughout. A nice pair of French naval pistols. EMW Barrel Length: (BOTH) 6" Caliber/Bore: (BOTH) .60 Smoothbore FFL Status: Antique Manufacturer: (A) Chatellerault (B) Tulle Model: (BOTH) 1837 Serial Number: (BOTH) NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) ENGLISH BRASS BARRELED FLINTLOCK PISTOL.

Lot # 3043 (Sale Order: 43 of 582)      

Octagonal to round barrel is separated by a wedding ring at the girdle, signed "London" across the top flat, with light floral engraving on 3 flats. Very slightly swamped barrel. Offset private Tower proof marks comprising "(Crown) / (Crossed Scepters)", and a beaded edged at tang. Iron tang with floral decorations, lost towards rear. Trumpted headed ramrod feeds through a single brass ferrule that is integrated with the forend cap (also brass) and feeds into a simple reinforced mouth. Unadorned iron lock with swan neck lock, bridled waterproof pan. Brass trigger guard with beaded edges and central floral and an acorn finial. CONDITION: Very good. Brass appears to have been cleaned at one point, with legends somewhat softened and micro polishing marks visible, and a few spots of scattered darkness. Lock has an even oxidized appearance and, given the quality of the balance of the pistol, may be a replacement. Iron strap behind barrel has some pitting towards rear that has damaged decoration. Stock is very hood with some marks from handling and storage throughout, and 1 crack that runs from just underneath the cock all the way to the side screw on the other side of pistol. 1 repair next to trigger guard that appears to have been executed with iron. Mechanically fine, bore is excellent with even oxidation throughout. While unsigned, this is a good quality pistol. EMW Barrel Length: 8" Caliber/Bore: .62 Smoothbore FFL Status: Antique Manufacturer: London Model: Flintlock Pistol Serial Number: NSN
Octagonal to round barrel is separated by a wedding ring at the girdle, signed "London" across the top flat, with light floral engraving on 3 flats. Very slightly swamped...more barrel. Offset private Tower proof marks comprising "(Crown) / (Crossed Scepters)", and a beaded edged at tang. Iron tang with floral decorations, lost towards rear. Trumpted headed ramrod feeds through a single brass ferrule that is integrated with the forend cap (also brass) and feeds into a simple reinforced mouth. Unadorned iron lock with swan neck lock, bridled waterproof pan. Brass trigger guard with beaded edges and central floral and an acorn finial. CONDITION: Very good. Brass appears to have been cleaned at one point, with legends somewhat softened and micro polishing marks visible, and a few spots of scattered darkness. Lock has an even oxidized appearance and, given the quality of the balance of the pistol, may be a replacement. Iron strap behind barrel has some pitting towards rear that has damaged decoration. Stock is very hood with some marks from handling and storage throughout, and 1 crack that runs from just underneath the cock all the way to the side screw on the other side of pistol. 1 repair next to trigger guard that appears to have been executed with iron. Mechanically fine, bore is excellent with even oxidation throughout. While unsigned, this is a good quality pistol. EMW Barrel Length: 8" Caliber/Bore: .62 Smoothbore FFL Status: Antique Manufacturer: London Model: Flintlock Pistol Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 650.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) MARIETTE BREVETE PEPPERBOX PERCUSSION REVOLVER.

Lot # 3044 (Sale Order: 44 of 582)      

4 barrel configuration with false rifled muzzles to aid in barrel removal. Stamped "MARIETTE / BREVETE" on front strap. Damascus twist off barrels are marked numerically on the rear of the barrel and over the chamber. Underhammer ring trigger engraved with florals. Round bodied action with floral engraving that extends down backstrap. Dark wood grips with single screw through a central eschutcheon engraved en suite. CONDITION: Very good, with the metal having been cleaned in the typical European fashion with some spotted inactive oxidation throughout and a few handling marks. Stocks are very good with some handling marks and dings from age, but solid. Left grip scale has an area of what looks to be adhesive from a sticker. Mechanically fine, bores are very good. EMW Barrel Length: 2 - 3/8" Caliber/Bore: .40 Percussion FFL Status: Antique Manufacturer: Belgium Model: Pepperbox Serial Number: NSN
4 barrel configuration with false rifled muzzles to aid in barrel removal. Stamped "MARIETTE / BREVETE" on front strap. Damascus twist off barrels are marked numerically ...moreon the rear of the barrel and over the chamber. Underhammer ring trigger engraved with florals. Round bodied action with floral engraving that extends down backstrap. Dark wood grips with single screw through a central eschutcheon engraved en suite. CONDITION: Very good, with the metal having been cleaned in the typical European fashion with some spotted inactive oxidation throughout and a few handling marks. Stocks are very good with some handling marks and dings from age, but solid. Left grip scale has an area of what looks to be adhesive from a sticker. Mechanically fine, bores are very good. EMW Barrel Length: 2 - 3/8" Caliber/Bore: .40 Percussion FFL Status: Antique Manufacturer: Belgium Model: Pepperbox Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 700.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) PAIR OF HIGHLY UNUSUAL GERMAN OVER/UNDER SASH PISTOLS BY RAITHEL, WITH A RIFLED BARREL AND A SMO

Lot # 3045 (Sale Order: 45 of 582)      

Raithel is recorded working in Schorndorf circa 1845. Clearly manufactured as a pair with "1" and "2" engraved on tangs and identical features. Barrels are in an unusual over/under configuration with the over barrel rifled and the under barrel smoothbore, diminutive blade front sights mounted to top of barrel, notch rear sights mounted to tangs. Fish form hammers engraved with floral scroll and incorporating a rather clever rotating safety that, when engaged, prevents the hammer from falling onto the nipple. Back action percussion locks decorated with scroll on site, and marked "Schorndorf" on left lock, "Raithel" on right lock. Stiff leaf engraving in a band between locks and barrels. Double triggers protected by trigger guard with finger spur. Fluted walnut one piece grips, buttcaps engraved en suite with balance of mounts. Housed in a walnut case with brass plaque engraved "D.H", lined in purple, and French fitted to fit both pistols and accessories comprising a combination bullet mold and sprue cutter, loader and mallet tool, 3 recesses with percussion caps, lead projectiles, patches, and small brass cap. CONDITION: Metal has been polished in the typical European fashion with visible darkness and some areas of delamination. Locks and cocks cleaned en suite but somewhat darker than barrels and may be an older polish. Stocks are very good with marks throughout but free of cracks or chips. One pistol trigger guard is not anchored correctly at rear and spins freely. Case is very good, relined, with lining peeling in a few spots. Accessories are very good with some signs of use. A neat pair. EMW Accessories: Case Barrel Length: (BOTH) 4" Caliber/Bore: (ALL) .31 Percussion FFL Status: Antique Manufacturer: (BOTH) Raithel Model: (BOTH) Percussion Paperwork: COA Serial Number: (BOTH) NSN
Raithel is recorded working in Schorndorf circa 1845. Clearly manufactured as a pair with "1" and "2" engraved on tangs and identical features. Barrels are in an unusual ...moreover/under configuration with the over barrel rifled and the under barrel smoothbore, diminutive blade front sights mounted to top of barrel, notch rear sights mounted to tangs. Fish form hammers engraved with floral scroll and incorporating a rather clever rotating safety that, when engaged, prevents the hammer from falling onto the nipple. Back action percussion locks decorated with scroll on site, and marked "Schorndorf" on left lock, "Raithel" on right lock. Stiff leaf engraving in a band between locks and barrels. Double triggers protected by trigger guard with finger spur. Fluted walnut one piece grips, buttcaps engraved en suite with balance of mounts. Housed in a walnut case with brass plaque engraved "D.H", lined in purple, and French fitted to fit both pistols and accessories comprising a combination bullet mold and sprue cutter, loader and mallet tool, 3 recesses with percussion caps, lead projectiles, patches, and small brass cap. CONDITION: Metal has been polished in the typical European fashion with visible darkness and some areas of delamination. Locks and cocks cleaned en suite but somewhat darker than barrels and may be an older polish. Stocks are very good with marks throughout but free of cracks or chips. One pistol trigger guard is not anchored correctly at rear and spins freely. Case is very good, relined, with lining peeling in a few spots. Accessories are very good with some signs of use. A neat pair. EMW Accessories: Case Barrel Length: (BOTH) 4" Caliber/Bore: (ALL) .31 Percussion FFL Status: Antique Manufacturer: (BOTH) Raithel Model: (BOTH) Percussion Paperwork: COA Serial Number: (BOTH) NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) CHARLES LANCASTER 4 BARREL .455 CF "HOWDAH" LANCASTER PISTOL.

Lot # 3046 (Sale Order: 46 of 582)      

An evolution (as evidenced by the name) of the so-called Howdah pistols previously employed by big game hunters to serve as a last ditch weapon against charging game or a tiger that had jumped onto the howdah, the Lancaster pistol utilized a four barrel configuration that couple be rapidly fired and reloaded with surprising ease. They were heavily favored by explorers and big game hunters for their reliability, and some number were even known to have made their ways onto the battlefield, primarily in Africa. This example has a half moon front sight and is engraved "455 C F" in left gullet, "CHARLES LANCASTER. PATENT. 151. NEW BOND ST. LONDON.". All 4 barrels have "(Crown) / V", "(Crown) / CP", and "(Lion) / G" proofs, frame with "Crown / V" proofs behind each barrel. There is a "1" on lower right barrel which corresponds to frame number. Trigger guard engraved 7385. Birds head grips are checkered walnut, with rotatable lanyard loop on butt. CONDITION: Excellent, as likely period refinished. Barrels has numerous bumps and bruises throughout from but still have the vast majority of their blue finish. Frame is the distinct English high polish blue with some scratches and bruises throughout, back strap and trigger guard are essentially patina with a few extra small areas of blue remaining; front strap with more blue commensurate with frame. Locking piece retains most fire blue with some marks from handling. Grips are good with honest wear and bruising throughout, slightly askew from frame. Action works appropriately when operated by hand, bores are excellent. EW Barrel Length: 6 - 3/8" Caliber/Bore: .455 CF FFL Status: Antique Manufacturer: Charles Lancaster Model: Howdah Serial Number: 7385
An evolution (as evidenced by the name) of the so-called Howdah pistols previously employed by big game hunters to serve as a last ditch weapon against charging game or a...more tiger that had jumped onto the howdah, the Lancaster pistol utilized a four barrel configuration that couple be rapidly fired and reloaded with surprising ease. They were heavily favored by explorers and big game hunters for their reliability, and some number were even known to have made their ways onto the battlefield, primarily in Africa. This example has a half moon front sight and is engraved "455 C F" in left gullet, "CHARLES LANCASTER. PATENT. 151. NEW BOND ST. LONDON.". All 4 barrels have "(Crown) / V", "(Crown) / CP", and "(Lion) / G" proofs, frame with "Crown / V" proofs behind each barrel. There is a "1" on lower right barrel which corresponds to frame number. Trigger guard engraved 7385. Birds head grips are checkered walnut, with rotatable lanyard loop on butt. CONDITION: Excellent, as likely period refinished. Barrels has numerous bumps and bruises throughout from but still have the vast majority of their blue finish. Frame is the distinct English high polish blue with some scratches and bruises throughout, back strap and trigger guard are essentially patina with a few extra small areas of blue remaining; front strap with more blue commensurate with frame. Locking piece retains most fire blue with some marks from handling. Grips are good with honest wear and bruising throughout, slightly askew from frame. Action works appropriately when operated by hand, bores are excellent. EW Barrel Length: 6 - 3/8" Caliber/Bore: .455 CF FFL Status: Antique Manufacturer: Charles Lancaster Model: Howdah Serial Number: 7385

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) AMERICAN ARMS COMPANY SIDE BY SIDE SHOTGUN.

Lot # 3047 (Sale Order: 47 of 582)      

An early (circa 1895) 10 gauge Damascus steel barreled game gun with extractors and 2 - 7/8" chambers. Barrels fit with a wide machine filed matte rib, extension, and steel front bead sight. Rib reads "AMERICAN ARMS CO BOSTON". Chokes are Modified and Cylinder. Boxlock silver grey patina action engraved with light scrolls and game scenes, double triggers, checkered/engraved top lever, and partially checkered safe slide. Gun is non-auto safe. Dark reddish brown stock with 2 panel checkered round knob pistol grip is also fit with a brown ventilated pad. Length of pull 14 - 3/8". Dark brown smooth checkered splinter forend with Deeley styled engraved latch release. Iron metal is engraved with light scroll. CONDITION: Good. Barrels with lots of brown remaining. Barrels with indentations and freckling. Action and triggers are sound. Action with light case colors remaining. Stock is good with handling marks and slightly smooth checkering. Forend with slightly smooth checkering and chips to edges and base. CP Barrel Length: 32" Chamber: 2 - 7/8" Choke: Modified & Cylinder Drop at Comb: 2" Drop at Heel: 3 - 1/8" FFL Status: Antique Gauge: 10 Bore Length of Pull: 14 - 3/8" Manufacturer: American Arms Company Model: Whitmore Patent SxS Serial Number: 1049 Weight: 9 Lbs. 7 oz.
An early (circa 1895) 10 gauge Damascus steel barreled game gun with extractors and 2 - 7/8" chambers. Barrels fit with a wide machine filed matte rib, extension, and ste...moreel front bead sight. Rib reads "AMERICAN ARMS CO BOSTON". Chokes are Modified and Cylinder. Boxlock silver grey patina action engraved with light scrolls and game scenes, double triggers, checkered/engraved top lever, and partially checkered safe slide. Gun is non-auto safe. Dark reddish brown stock with 2 panel checkered round knob pistol grip is also fit with a brown ventilated pad. Length of pull 14 - 3/8". Dark brown smooth checkered splinter forend with Deeley styled engraved latch release. Iron metal is engraved with light scroll. CONDITION: Good. Barrels with lots of brown remaining. Barrels with indentations and freckling. Action and triggers are sound. Action with light case colors remaining. Stock is good with handling marks and slightly smooth checkering. Forend with slightly smooth checkering and chips to edges and base. CP Barrel Length: 32" Chamber: 2 - 7/8" Choke: Modified & Cylinder Drop at Comb: 2" Drop at Heel: 3 - 1/8" FFL Status: Antique Gauge: 10 Bore Length of Pull: 14 - 3/8" Manufacturer: American Arms Company Model: Whitmore Patent SxS Serial Number: 1049 Weight: 9 Lbs. 7 oz.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 325.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) BELGIUM PINFIRE SIDE BY SIDE SHOTGUN

Lot # 3048 (Sale Order: 48 of 582)      

Circa 1860. An ornately engraved 16 guage with 29 - 3/4" Damascus steel barreled vintage game gun with with 2 - 1/2" chambers. Barrel's rib is smooth and slightly concaved with a round steel front bead sight. Bottom of right barrel are stamped "JB" and "27.2". Left is stamped with early Belgium proofs and serial number "3519". Chokes are Cylinder and Cylinder. Double dog ear engraved and checkered hammers on this pinfire peninsula action are built with double triggers. Action with Jones type underlever and with 1/2 cock. Action with lovely vine and scroll engraving. Dark reddish brown stock with straight hand grip, loop for sling and is finished with a steel butt plate. Trigger guard, hammers, bottom and top strap are nicely engraved with matched scroll. The smooth cross pinned splinter forend is fit with an engraved escutcheon. CONDITION: Good. Barrels with lots of Damascus configuration remaining. Bores are good. Action and triggers are sound. Stock good with various handling marks from use, age and storage. Forend good also with older handling marks. Pretty Vintage Piece. CP Barrel Length: 29-3/4" Chamber: 2 - 1/2" Choke: CYL and CYL Drop at Comb: 1 - 1/2" Drop at Heel: 2 - 1/8" FFL Status: Antique Gauge: 16 bore Length of Pull: 14 - 1/2" Manufacturer: Belgium Model: Pinfire Side by Side Serial Number: 3519 Weight: 6 Lbs. 13 oz.
Circa 1860. An ornately engraved 16 guage with 29 - 3/4" Damascus steel barreled vintage game gun with with 2 - 1/2" chambers. Barrel's rib is smooth and slightly concave...mored with a round steel front bead sight. Bottom of right barrel are stamped "JB" and "27.2". Left is stamped with early Belgium proofs and serial number "3519". Chokes are Cylinder and Cylinder. Double dog ear engraved and checkered hammers on this pinfire peninsula action are built with double triggers. Action with Jones type underlever and with 1/2 cock. Action with lovely vine and scroll engraving. Dark reddish brown stock with straight hand grip, loop for sling and is finished with a steel butt plate. Trigger guard, hammers, bottom and top strap are nicely engraved with matched scroll. The smooth cross pinned splinter forend is fit with an engraved escutcheon. CONDITION: Good. Barrels with lots of Damascus configuration remaining. Bores are good. Action and triggers are sound. Stock good with various handling marks from use, age and storage. Forend good also with older handling marks. Pretty Vintage Piece. CP Barrel Length: 29-3/4" Chamber: 2 - 1/2" Choke: CYL and CYL Drop at Comb: 1 - 1/2" Drop at Heel: 2 - 1/8" FFL Status: Antique Gauge: 16 bore Length of Pull: 14 - 1/2" Manufacturer: Belgium Model: Pinfire Side by Side Serial Number: 3519 Weight: 6 Lbs. 13 oz.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 850.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) CHARLES BOSWELL SIDE BY SIDE SHOTGUN.

Lot # 3049 (Sale Order: 49 of 582)      

Circa 1885. This nice boxlock 12 bore with 30" nitro proofed brown Damascus steel barrels is fit with ejectors and a smooth concave tapered rib. Rib is fit with a small brass front bead and extension. Rib reads "CHARLES BOSWELL MAKER, 126 STRAND LONDON". Barrels chamber length is 2 - 1/2". Chokes are Full and Improved Cylinder. The silver gray patina boxlock action is fully engraved with scrolls and reads "CHARLES BOSWELL" in a ribbon on both walls. Action is also nicely equipped with a third fastener. The actions fences are decorated with scrolls and a bold leaf pattern. Bottom of action is blued and engraved matching the top lever. The guns double triggers are protected by a blued scroll engraved trigger guard that extends to a full length bottom strap with serial number "12964" engraved. Action is auto-safe and fit with a checkered safe slide and the word "SAFE" is in gold just ahead of the slide. The reddish brown tiger striped European walnut stock with two panel flat top checkered English straight grip is furnished with a gold oval and finished with a checkered vulcanized butt plate. Stock LOP is 14 - 1/8". The gun is fit with a splintered forend also with flat top checkering and a scroll engraved Anson styled push button release. Gun resides in a leather case with paper Charles Boswell trade label, snap caps, striker pot and oil bottle. CONDITION: Very good. Barrels with faded brown and good Damascus pattern. Bores are bright. Stock is a replacement and has some visible signs of handling and use. Original forend is good with signs of age and use. Vintage leather case is good with signs of use and storage. Nice piece. CP Accessories: Cased with Accessories Barrel Length: 30" Chamber: 2 - 1/2" Choke: (L) .041 (R) .014 Drop at Comb: 1 - 5/8" Drop at Heel: 2 - 3/8" FFL Status: Antique Gauge: 12 Bore Internal Bore Diameter: (L) .738 (R) .739 Length of Pull: 14 - 1/8" Manufacturer: Charles Boswell Model: Side by Side Serial Number: 12964 Weight: 6 Lbs. 11 oz.
Circa 1885. This nice boxlock 12 bore with 30" nitro proofed brown Damascus steel barrels is fit with ejectors and a smooth concave tapered rib. Rib is fit with a small b...morerass front bead and extension. Rib reads "CHARLES BOSWELL MAKER, 126 STRAND LONDON". Barrels chamber length is 2 - 1/2". Chokes are Full and Improved Cylinder. The silver gray patina boxlock action is fully engraved with scrolls and reads "CHARLES BOSWELL" in a ribbon on both walls. Action is also nicely equipped with a third fastener. The actions fences are decorated with scrolls and a bold leaf pattern. Bottom of action is blued and engraved matching the top lever. The guns double triggers are protected by a blued scroll engraved trigger guard that extends to a full length bottom strap with serial number "12964" engraved. Action is auto-safe and fit with a checkered safe slide and the word "SAFE" is in gold just ahead of the slide. The reddish brown tiger striped European walnut stock with two panel flat top checkered English straight grip is furnished with a gold oval and finished with a checkered vulcanized butt plate. Stock LOP is 14 - 1/8". The gun is fit with a splintered forend also with flat top checkering and a scroll engraved Anson styled push button release. Gun resides in a leather case with paper Charles Boswell trade label, snap caps, striker pot and oil bottle. CONDITION: Very good. Barrels with faded brown and good Damascus pattern. Bores are bright. Stock is a replacement and has some visible signs of handling and use. Original forend is good with signs of age and use. Vintage leather case is good with signs of use and storage. Nice piece. CP Accessories: Cased with Accessories Barrel Length: 30" Chamber: 2 - 1/2" Choke: (L) .041 (R) .014 Drop at Comb: 1 - 5/8" Drop at Heel: 2 - 3/8" FFL Status: Antique Gauge: 12 Bore Internal Bore Diameter: (L) .738 (R) .739 Length of Pull: 14 - 1/8" Manufacturer: Charles Boswell Model: Side by Side Serial Number: 12964 Weight: 6 Lbs. 11 oz.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) FRENCH 8 BORE SINGLE SHOT SHOTGUN.

Lot # 3050 (Sale Order: 50 of 582)      

19th Century market hunter's 8 bore single barrel shotgun made in France in the mid to late 1800s. 44 -1/2" twist steel half octagon barrel with bead front sight and sling swivel studs marked on top barrel flat "PAUL BLe XXXXXX" and marked "St. Entienne" on underside barrel flat. Round scroll engraved underlever action with back action external hammer lock. Walnut checkered English straight grip stock with steel buttplate and matching checkered walnut push button forearm. CONDITION: Poor with external pitting on metal surfaces. Wood shows heavy usage marks and dings missing a sling swivel eyelet. Pitted bore with functioning mechanics. DLM Barrel Length: 44 - 1/2" FFL Status: Antique Gauge: 8 Bore Manufacturer: St. Etienne Model: Single Shot Serial Number: NSN
19th Century market hunter's 8 bore single barrel shotgun made in France in the mid to late 1800s. 44 -1/2" twist steel half octagon barrel with bead front sight and slin...moreg swivel studs marked on top barrel flat "PAUL BLe XXXXXX" and marked "St. Entienne" on underside barrel flat. Round scroll engraved underlever action with back action external hammer lock. Walnut checkered English straight grip stock with steel buttplate and matching checkered walnut push button forearm. CONDITION: Poor with external pitting on metal surfaces. Wood shows heavy usage marks and dings missing a sling swivel eyelet. Pitted bore with functioning mechanics. DLM Barrel Length: 44 - 1/2" FFL Status: Antique Gauge: 8 Bore Manufacturer: St. Etienne Model: Single Shot Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 700.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 24

1.178.0.771.56c32e2.9.68