Premiere Firearms Auction - Day 1

Premiere Firearms Auction - Day 1

Friday, May 3, 2019  |  9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 1

Premiere Firearms Auction - Day 1

Friday, May 3, 2019  |  9:00 AM Central
Auction closed.
Internet Premium: 21.5%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 40

Colt Model 1848 Baby Dragoon Percussion Revolver

Lot # 26 (Sale Order: 26 of 995)      

Fine Late Production Colt Model 1848 Baby Dragoon Percussion Revolver

Only around 15,000 of these revolvers were manufactured in 1847-1850 compared to over 325,000 of the Model 1849 Pockets. This one was manufactured in 1850 and has the combination of the stagecoach cylinder scene, oval cylinder stops, and squareback trigger guard usually found in the 10400-12100, but this revolver is obviously even later than that and falls in the range with transitional 1848 Baby Dragoon/1849 Pocket revolvers with the attached loading lever and stagecoach cylinder with the rectangle stops of the '49 Pocket and the square back trigger guard of the Baby Dragoon. It also has a German silver front sight post, "-ADDRESS SAML COLT/NEW YORK CITY-" on top of the barrel, small "COLTS/PATENT" marking on the left side of the frame, a "K" on the bottom of the frame, "T" on the back of the barrel lug, and matching serial numbers on the barrel, wedge, cylinder pin, cylinder, frame, grip straps, and handwritten in pencil in the back strap mortise of the grip.

Class: Antique

Fine with 75% of the original silver plating remaining mostly taking on a dark blue patina, 30% of original blue and crisp muted patterns of original casehardened finish, mostly gray and brown patina on the balance, a bent front sight, replaced wedge screw, minor tool marks, and slight oxidation. The grip is also fine and has smooth finish, a few minor dings, and mild edge wear. Mechanically excellent. One does not find many of these Baby Dragoons in this fine condition.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Pocket Conversion Revolver

Lot # 27 (Sale Order: 27 of 995)      

Colt Pocket Conversion Revolver

This is a fine example of a Colt Pocket Conversion revolver that was manufactured c. 1873-1880. The revolver is chambered for the Colt 38 CF cartridge and features a distinctive 3 1/2-inch barrel with no provision for an ejector rod. The barrel has a brass cone front sight and is roll-stamped: "COLT'S PT. F.A. MFG. Co./HARTFORD CT. U.S.A." in two lines. The cylinder is roll-stamped with the Stagecoach Holdup scene and "COLTS PATENT". The left side of the frame is roll-stamped: "-PAT. JULY 25. 1871-/-PAT. JULY, 2, 1872,-" in two lines. "31 CAL" is stamped on the left shoulder of the trigger guard; the original caliber marking has been over-stamped "36". The full serial number, "317106", is stamped on the bottom of the barrel lug, frame, trigger guard and back strap. The cylinder is stamped with the partial serial number "7106". All of the visible serial numbers match. The frame does not have a loading gate. The hammer has the center-fire firing pin. The barrel and cylinder are blued. The frame and hammer are color casehardened, and the brass trigger guard and back strap are silver-plated. The one-piece walnut grip has a high polish piano finish.

Class: Antique

Fine. 75% of the blue finish is present on the barrel with some edge wear and thinning. The barrel markings are crisp. The cylinder retains all of the roll-engraved scene and about 30% of the blue finish. Most of the finish is concentrated on the rebated portion of the cylinder. The hammer and right side of the frame retain 50% of the casehardened finish. The left side of the frame shows more wear and has a silver-gray patina. The trigger guard and back strap retain 80% of the silver-plated finish. The grip is in very fine condition and has most of the original piano finish intact with wear present on both sides of the butt. The action is crisp but the hammer will not hold at half-cock. This is a very good example of a Colt Model 1849 Pocket Conversion revolver.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Era Commercial Colt Model 1851 Navy Revolver

Lot # 28 (Sale Order: 28 of 995)      

Very Scarce Civil War Era Commercial Colt Model 1851 Navy Percussion Revolver with Four Screw Frame

Manufactured in 1862 with cone and hammer notch sights, the one-line New York address, standard cylinder scene and patent markings, "S" below the serial number on the frame and trigger guard, and matching serial numbers on the barrel, wedge, cylinder (period renumbered below the original "4564"), frame, trigger guard, back strap, and grip mortise.

Class: Antique

Fine with 25% original blue finish on the barrel concentrated on the sides of the barrel lug, 30% original casehardened finish concentrated on the sides of the frame, traces of original silver plating on the grip frame, aged patina on the silver and brass, mostly light gray and brown patina on the balance, some mild pitting, and scattered scratches and minor marks. Half of the cylinder safety pins remain solid. The grip is very good and has moderate edge wear, scrapes and pressure marks, and handling wear. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Early Squareback Colt Model 1851 Navy Percussion Revolver

Lot # 29 (Sale Order: 29 of 995)      

Desirable Early Production Colt Second Model Squareback 1851 Navy Percussion Revolver

The Model 1851 Navy is one of the most significant firearms in the history of Colt firearms and was the second most popular of all Colt percussion firearms after only the Model 1849 Pocket, and shared the longest production run of 1850-1873 with the latter. This early Navy was manufactured in 1850, the first year of production, and has the standard features for the Second Model which has the wedge under the screw unlike the First Model and retains the squareback trigger guard of the First Model. Only approximately 3,000 of these revolvers are estimated to have been manufactured given the serial number range of 1250-4200 includes some of the early Third Model revolvers. It has matching serial numbers, including in the back strap mortise of the grip (faint).

Class: Antique

Very good with 40% original silver plating remaining on the grip straps, aged patina on the brass and silver, a mix of mostly gray and brown patina on the balance, light pitting concentrated on the cylinder, and mild overall wear. The reoiled grip is also very good and has smooth oiled surfaces, some small nicks, a few dents, and a very slight chip at the toe on the right. Mechanically fine. Overall, this is a solid representative example of a first year Colt Second Model 1851 Navy.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,000.00

You've been outbid  to D****d! to YOU!

Placing your bid. please wait...

Cased Engraved Colt Model 1849 Pocket Revolver & Accessories

Lot # 30 (Sale Order: 30 of 995)      

Factory Engraved Cased Colt Model 1849 Pocket Percussion Revolver with Accessories

The engraving on this revolver, which was manufactured in 1853, is very similar to other revolvers identified as engraved by Gustave Young for the Colt factory by R.L. Wilson and others. A small "." is marked by the main serial numbers which was used by the factory to signify revolvers receiving engraving and/or special finishing c.1849-61. The serial numbers are matching. The engraving consists of Germanic "blackleaf" scrollwork on the sides of the barrel, loading lever, nearly all of the frame, and the upper and lower portions of the back strap and trigger guard along with some shell and border patterns and the wolf head motif on the hammer. The barrel has a small brass post/cone front sight, hand engraved "Saml Colt" in Gothic script with ornate borders, and the hand engraved "COLTS/PATENT" marking found on Young engraved revolvers is on the left side of the frame. The cylinder has the standard stagecoach scene. The deluxe grip has no visible number and has attractive figure. It comes in a partitioned hardwood case with a cap tin, double sided eagle powder flask, Colt patent dual cavity bullet mold, and six lead balls.

Class: Antique

Fair with mostly smooth artificial gray patina, aged patina on the brass, generally crisp engraving and cylinder scene, some slight pitting, and mild overall wear. The lightly sanded and oiled grip is good and has attractive figure, smooth finish, and minor handling and storage marks. Mechanically excellent. The modern relined case is good and has a filled in key hole plate mortise, some partially loose dividers, and general storage wear. The cap tin has a replaced label. The other accessories are fair and have the appropriate wear associated with their age including dark patinas, a few dents in the flask, and mild oxidation and pitting on the sprue cutter. This is an attractive example of Gustave Young's work for Colt in the early 1850s.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Experimental Patent Model Colt 1851 Navy Revolver

Lot # 31 (Sale Order: 31 of 995)      

Extremely Rare and Well Documented Experimental Patent Model Colt Model 1851 Navy Revolver for Schenck Hair Trigger Device

This Colt Model 1851 Navy revolver was manufactured in 1866 and fitted with the extremely rare "Schenck Patent Hair Trigger Device" and stamped "PATENT" in bold lettering on the modified trigger guard. Colt Model 1851 Navy serial number 194724 fitted with a similar but not identical device is illustrated on page 132 of "THE BOOK OF COLT FIREARMS" by R.L. Wilson. A Colt Model 1860 Army, serial number 159995, fitted with an identical Schenck trigger device is pictured on page 166 of "THE BOOK OF COLT FIREARMS". Wilson states on page 132 of "THE BOOK OF COLT FIREARMS" that: "F. Schenck is known to have visited the Colt factory to show the mechanism to interested officials". He further states that the Schenck Hair Trigger Device is: "One of the most unusual accessory devices adapted to Colt arms: there are only a half-dozen models or less of the 1851 and 1860 pistols known to the authors as having the Schenck device". This revolver is a standard, Late Fourth Model 1851 Navy revolver with round trigger guard, capping channel in the recoil shield cut-out, thick loading lever catch and V-type, bevelled, loading cut-out in the barrel lug. The "PATENT" marked trigger guard is a replacement with slightly wider bow and other modifications to accept the Schenck trigger attachments. The barrel has a non-standard, dove-tail mounted, pinch-top front sight. The late style hammer has bordered knurling on the spur. The revolver components have been polished bright, the brass trigger guard and back strap have a natural finish and the one-piece walnut grip has the standard varnish finish. The top barrel flat is roll-stamped: "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" in one line. The cylinder is roll-engraved with the standard Texas Navy battle scene and "COLTS PATENT No." markings. The left side of the frame is roll-stamped "COLTS/PATENT" in two lines. The full serial number is stamped on the barrel lug, frame and back strap. The partial serial number, "97772" is stamped on the wedge and "7772" is stamped on the cylinder and cylinder pin. All of the visible serial numbers match. The loading lever and trigger guard are not serial numbered.

Class: Antique

Fine. The metal surfaces are bright. The exposed portions of the barrel, lever, frame cylinder and hammer are smooth with crisp markings. There is a small amount of flash pitting on the percussion nipples and cylinder ratchet. 100% of the Texas Navy cylinder scene remains intact. The brass trigger guard and back strap have a good-looking patina. The walnut grip is in very fine condition with light to moderate handling wear and nearly 90% of the original varnish finish. The Schenck device appears to be functional. This is an extremely rare and unusual modification of a Colt Model 1851 Navy revolver found in only the most advanced collections of Colt percussion revolvers.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Patent Model for Schenck Hair Trigger Device for Colt Revolvers

Lot # 32 (Sale Order: 32 of 995)      

Rare Documented Patent Model for Schenck Hair Trigger Device for Colt Revolvers with Original Patent Card

Hand-made patent model for Schenck Hair Trigger Device for Colt percussion revolvers. This patent model along with patent card are illustrated and described on page 132 of the "BOOK OF COLT FIREARMS" by R.L. Wilson. Attached to the trigger guard is the original patent card "No. 57,978" marked: "F. Schenck/Gun-Lock/Patented Sept. 11th/1866". The Model consists of a brass frame, trigger guard and back strap, Colt percussion hammer and one-piece walnut grip. The trigger guard and frame have the Schenck Hair Trigger modifications. R.L. Wilson states in "THE BOOK OF COLT FIREARMS" that F. Schenck visited the Colt factory to show his hair trigger device to Colt management and that "only a half-dozen or less" Colt Model 1851 and Model 1860 revolvers are known to be equipped with the Schenck device. Examples with Schenck Hair Trigger devices are illustrated on pages 132 and 166 of "THE BOOK OF COLT FIREARMS". The model is displayed in a contemporary frame with a copy of the patent drawing.

Class: Other

Very good. The device appears to be complete and is in original "attic" condition. The brass frame, trigger guard and back strap have a dark, untouched, patina. The hammer is original to the model and appears to have been salvaged from an existing Colt revolver and has a mottled silver-gray patina with light flash pitting. The walnut grip has period repairs and is painted brown. The patent tag is sealed in plastic and is attached to the trigger guard by what appears to be the original red ribbon. The tag is in fair condition. This is a one-of-a-kind documented patent model for the extremely rare Schenck Hair Trigger Device that was fitted to "only a half-dozen or less" Colt Model 1851 and Model 1860 Army revolvers.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Experimental Centerfire Colt Model 1851 Navy Revolver

Lot # 33 (Sale Order: 33 of 995)      

Important Experimental Centerfire Conversion Colt Model 1851 Navy Revolver

The consignor indicated this is one of three Colt factory toolroom conversions from his collection and notes that toolroom workmen in the 1870s "were given free rein to develop conversion systems that would enable sales of surplus percussion revolvers." See the article "Colt's Toolroom in the 1870s" by Dick Salzer in Arms Heritage Magazine Vol. 1 Issue 2 for more details. The revolver's serial number dates to 1854, and the barrel has the early New York City address. The fame has the small "COLTS/PATENT" marking on the left. The cylinder has the standard Navy roll scene and is cut for use with metallic cartridges including recesses at the back of the chambers unlike the standard conversion. The breech plate/recoil shield is secured to the frame by three screws, and the loading gate has an unusual release lever and latch rather than the spring used on the standard conversions. The hammer has a long firing pin and no notch rear sight. The revolver is not fitted with an ejector and retains the original percussion loading lever. The matching serial numbers are stamped on the loading lever, wedge, barrel, cylinder, cylinder pin, frame, and grip straps and handwritten in ink in the back strap mortise of the grip. The reworked components are a mix of in-the-white and dull blue, and the breech plate appears to have been finished in a plum brown. The barrel is the original bright blue, and the grip straps have the original silver plating.

Class: Antique

Fine with 60% of the original bright blue on the barrel, subtle original case colors on the loading lever, mostly a dull blue finish on the frame and hammer, silver-gray on the cylinder, brown patina on the beech plate along with traces of a plum finish in the protected areas, 30% original silver plating showing aged patina on the grip straps, age patina on the exposed brass, some minor oxidation, and scattered minor marks and scratches. The grip is very fine with a series of notches cut on the lower left edge, light scratches and marks, strong varnished finish, and minor edge wear. Mechanically fine. This is a very interesting and unusual conversion revolver.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1860 Army Richards Cartridge Conversion Revolver

Lot # 34 (Sale Order: 34 of 995)      

Colt Model 1860 Army Richards Cartridge Conversion Revolver

This is one of approximately 9,000 Richards conversions manufactured in 1871-1878 based on designs by Charles B. Richards; Richards was also one of the designers of the Colt Single Action Army, and some of these revolvers were manufactured alongside the Single Action Army and are believed to have seen significant use in the Old West. The revolver is numbered within the independent factory made conversion range and has the standard markings and features associated with this variation, including matching visible serial numbers and "929" on the recoil shield and the loading gate.

Class: Antique

Very good with 85% plus period retailer nickel plating, mild pitting concentrated on the right, and general minor scratches and marks. The trigger guard numbers are faint, with all other markings crisp. The revarnished, slightly undersized grip is fine and has moderate lower edge wear, worn finish on the right, and glossy finish on the left. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt M1851 Navy Richards-Mason Cartridge Conversion Revolver

Lot # 35 (Sale Order: 35 of 995)      

Fine Three Digit Serial Number Colt Model 1851 Navy Richards-Mason Cartridge Conversion Revolver

Manufactured in the mid-1870s from a mixture of remaining percussion parts on hand and newly fabricated components, and the method of factory alteration was the same as in the Richards-Mason Model 1860 Army. These revolvers are found in the 1-3800 serial number range with this example having an early three digit serial number, "372." It has the one-line New York barrel address, "COLTS/PATENT" (factory double stamped) on the frame, naval cylinder scene and "36 CAL" on the trigger guard shoulder. Matching numbers are found on the barrel, frame, trigger guard, back strap and cylinder.

Class: Antique

Fine. The barrel and cylinder retain 50% original polished blue finish with the balance a smooth brown patina. 60% original case colors remain on the hammer and frame. Areas of original silver plating remain around the trigger and on top of the back strap, otherwise the exposed brass has an attractive appearance. The grips are excellent showing some minor handling evidence, some high edge wear and retaining most of the original varnish. Mechanically excellent. Do not miss the chance to acquire an attractive early Model 1851 Richards-Mason Cartridge Conversion Revolver that will make a great addition to your growing Colt antique collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Early Production Colt Open Top Pocket Revolver with Ejector

Lot # 36 (Sale Order: 36 of 995)      

Early Production Colt Open Top Pocket Revolver with Three Digit Serial Number 265

Only 7,000 of these revolvers are estimated to have been manufactured in the early 1870s. They are the direct predecessors of the Colt Single Action Army. This example was manufactured in 1871, the first year of production, and has the low three-digit serial number "265" on the barrel, faint number on cylinder, cylinder pin, frame, and Navy pattern grip straps and written in the back strap mortise of the grip. "20" is marked on the loading gate. The barrel has a German silver blade front sight, "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-." and an integral notch rear sight.

Class: Antique

Good. Most of the steel exhibits a mix of gray and brown patina along with some spots of minor pitting and traces of blue finish on the rear of the otherwise refinished cylinder. The grip frame has aged patina. The cylinder scene is mostly worn away, but the other markings are distinct. The grip is fair with a noticeable spliced vertical repair on the left panel and chipping on the left and mild edge wear on the right. Mechanically functions fine, but is slightly loose.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt 1861 Navy Richards-Mason Cartridge Conversion Revolver

Lot # 37 (Sale Order: 37 of 995)      

Colt Model 1861 Navy Richards-Mason Cartridge Conversion Revolver

It has the standard sights and markings including the 1871 and 1872 patent marking and matching visible serial numbers aside from the cylinder which is numbered "89474" (in the Model 1851 Navy range).

Class: Antique

Very good plus with 20% original blue and case colors, mostly mottled light gray patina, some minor pitting, aged patina on the grip straps, some traces of original silver in the protected areas, and mild overall wear. The grip is very good with minor handling and storage wear and slight chips at the toe. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Colt Model 1851 Navy Percussion Revolver with Holster

Lot # 38 (Sale Order: 38 of 995)      

Civil War Era Civilian Colt Model 1851 Navy Percussion Revolver with Holster

This Fourth Model 1851 Navy Revolver was manufactured by Colt in 1861 for the civilian/commercial market and has a dovetailed blade front sight, standard hammer groove rear sight, the one-line New York barrel address, standard "COLTS/PATENT" marking and cylinder scene, and matching serial numbers which generally also have the " ' " mark used by the factory to designate special features such as the grip on this revolver which is correctly hand numbered in the back strap mortise with the matching partial serial number. The open toe leather flap holster has no visible markings and appears to have original been finished black. Many of the Civil War era commercial handguns were purchased as private sidearms by soldiers.

Class: Antique

Very good plus with 20% original blue which is mainly concentrated on the barrel, patches of vibrant original case colors on the rear of the loading lever, the majority of the original silver plating remains in the protected areas concealed by the grip, patches of original silver on and around the trigger guard, aged patina on the exposed brass, mild oxidation and brown patina on the balance of the steel, and mild overall wear. The grip is very fine and has attractive natural tones and grain, some minor age cracks (stable), and light handling and storage wear. Mechanically excellent. The holster is fair with absent stud, some tears at the flap fold, heavy flaking and rub wear, solid stitching, and pliant leather. This revolver and holster certainly have the look of having seen some serious use back in the 19th century but also having been cared for.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Contract Colt Model 1860 Army Percussion Revolver

Lot # 39 (Sale Order: 39 of 995)      

Civil War U.S. Contract Colt Model 1860 Army Percussion Revolver

Manufactured in 1863 under contract with the U.S. Ordnance Department with a German silver blade front sight, the "NEW-YORK" address, standard patent markings and cylinder scene, hammer notch rear sight, three-screw frame and back strap cut for a shoulder stock, cartouches on each side of the grip, and matching serial numbers other than the wedge (2265).

Class: Antique

Very good with traces of the fading original case colors remaining, mostly light gray patina on the balance, some light pitting and discoloration, crisp markings and very fine cylinder scene, and minor marks and numerous deep scratches visible on the butt. The refinished grip is good with a chip on the lower right edge, traces of the original cartouches, and mostly smooth surfaces. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,900.00

You've been outbid  to k****e! to YOU!

Placing your bid. please wait...

Centerfire Conversion Colt Round Barrel Pocket Navy Revolver

Lot # 40 (Sale Order: 40 of 995)      

Scarce Colt Round Barrel Pocket Navy Centerfire Conversion Revolver

This variation was called the "Type 7 - New Model Breech Loading Police Pistol" in "Variations of Colt's New Model Police and Pocket Breech Loading Pistols" by Breslin, Pirie, and Price. These were manufactured in relatively limited numbers in 1873-1875. It has a post front sight, two-line Hartford barrel address, an ejector on the right side, the 1871 and 1872 patent dates on the frame, rebated non-fluted cylinder, "36 CAL" on the left side of the trigger guard, and a loading gate. The visible serial numbers all match and several have "L" by them suggesting this gun was meant for Colt's London agency, but it lacks London proofs indicating it never made it to London.

Class: Antique

Fine with 40% original blue finish concentrated in the protected areas and especially around the trigger guard, traces of original case colors, gray and brown patina on the balance, some minor pitting and oxidation, distinct cylinder scene and markings with the exception of the first two digits of the frame number, and mild overall wear. The grip is also fine with much of the original varnish, moderate lower edge wear, and light scratches and dings. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1849 Pocket Percussion Revolver

Lot # 41 (Sale Order: 41 of 995)      

Cased Colt Model 1849 Pocket Percussion Revolver

Manufactured in 1868 with standard markings and features. Comes in a hardwood case with an Eley cap tin, Colt patent single side eagle powder flask, two brass Colt patent bullet molds, a key, and a few lead balls.

Class: Antique

Very fine with 60% plus original blue and casehardened finish, a few patches of original silver plating, deep aged patina on the grip straps, some slight oxidation/pitting, and general mild wear. The grip is also very fine and has rich original finish, light scratches and dings, and minor edge wear. Mechanically excellent. The relined case and accessories are very good with mild storage wear, a dent in the flask, and a crack in the case lid.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War U.S. Navy Contract Colt Model 1861 Navy Percussion

Lot # 42 (Sale Order: 42 of 995)      

Civil War U.S. Navy Contract Colt Model 1861 Navy Percussion Revolver

This revolver was sold to the United States Navy Department and shipped to the Commanding Officer at the U.S. Navy Yard in Philadelphia, Pennsylvania, on January 17, 1862, in a shipment of 200 1861 Navy revolvers. The revolver has traces of the standard one line New York barrel address, "COLTS / PATENT" on the left side of the frame, and "36 CAL" on the left side of the trigger guard. The cylinder is roll engraved with the Texas Navy scene. Matching serial number are on the cylinder, barrel, frame, trigger guard, and back strap, and the partial serial number "495" is on the wedge. Only several hundred of these revolvers were sold to the Navy during the Civil War.

Class: Antique

Very good. The revolver has a smooth dark patina with even light spotting primarily on the barrel and some pin prick pitting primarily on the barrel and cylinder. The cylinder scene is faint. The brass has a fine aged patina. The oiled grip is fine with the exception of a chipped toe and some minor dings and scratches. It is mechanically functional but needs some work as it does not properly hold half cock.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Commercial Colt Model 1851 Navy Percussion Revolver

Lot # 43 (Sale Order: 43 of 995)      

Civil War Era Commercial Colt Model 1851 Navy Percussion Revolver

Manufactured in 1865. Standard markings and features, including matching serial numbers.

Class: Antique

Very good with 25% original blue on the barrel, traces of original case colors, some discoloration on the right side of the frame, aged patina on the brass, gray and brown patina on the balance, some light oxidation/pitting, light scratches and marks concentrated around the wedge on the right, and mild overall wear. The revarnished grip is very good with minor edge wear, strong varnish, and some small dings. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1851 Navy Percussion Revolver

Lot # 44 (Sale Order: 44 of 995)      

Pre-Civil War Colt Model 1851 Navy Percussion Revolver

Manufactured in 1857 with a cone front sight, the Hartford barrel address, standard cylinder scene and patent markings, hammer notch rear sight, "G" on the left side of the small trigger guard, varnished grip, and "MMC" hand scratched on the butt. The serial numbers match throughout.

Class: Antique

Fine with 80% original silver plating, 50% original blue finish on the barrel, traces of original case colors, aged patinas on the silver and exposed brass, brown patina on most of the balance, scattered mild pitting overall with light scratches and marks. One of the cylinder safety pins is flattened, but the others remain sound. The grip is fine and has strong original varnish, minor edge wear, and light scratches and nicks from handling and storage. Mechanically functions fine but slightly out of time.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1855 Root Revolver with Holster

Lot # 45 (Sale Order: 45 of 995)      

Colt Model 1855 "Root" Sidehammer Percussion Revolver with Holster Attributed to Medal of Honor Recipient Warren Carman with Letter of Provenance

According to the letter of provenance, this revolver and holster were owned by Private Warren Carman (1845-1894) of Company H, 1st NY Cavalry who was issued the Medal of Honor on March 26, 1865, for capturing the enemy flag and several prisoners at the Battle of Waynesboro, Virginia, on March 2, 1865. The Union forces under Brig. Gen. George Armstrong Custer captured 16 stands of colors and 1,000-1,800 men during the brief battle which was a rout thanks to ingenious strategy on Custer's part. The battle marked the end of Confederate Lt. Gen. Jubal Early forces. The document indicates Max F. McAllister Jr. received this pistol from Mary Carman, the widow of Warren Carman's son, in Fayetteville, Arkansas, around 1948. Also included is an unrelated letter for a Single Action Army Revolver with the same serial number. The revolver was manufactured in 1861 and has standard markings and features. The black leather flap style belt holster is unmarked and fits the pistol nicely.

Class: Antique

Fine with 40% plus original blue finish, 25% original case colors visible mostly on the tail end of the leaver, traces of original case colors elsewhere, smooth brown and gray patinas on the balance, some slight spotting, and mild overall wear. The grip is very fine with strong original varnish finish, slight nicks and pressure marks, and minor edge wear. Mechanically fine. The holster is fine and has crackling and flaking of the exterior surfaces, tight stitching, and some small tears. This is a very attractive "Root" revolver attributed as owned by a cavalryman who won our nation's highest military honor.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1860 Army Percussion Revolver with Factory Letter

Lot # 46 (Sale Order: 46 of 995)      

Documented Civil War U.S. Contract St. Louis Arsenal Shipped Colt Model 1860 Army Percussion Revolver with Factory Letter

The included factory letter indicates this revolver was part of a 1,000 gun shipment to Major F.D. Callender at the St. Louis Arsenal on November 7, 1862. It has the standard markings and features as well as government inspection markings and "CSL" and "JT" cartouches. The serial number match aside from the unnumbered wedge.

Class: Antique

Very good with mottled gray patina, some slight oxidation, and mild overall wear on the otherwise crisp metal. The grip is fine and has minor lower edge wear, crisp cartouches, and a few small dents. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1849 Pocket Percussion Revolver

Lot # 47 (Sale Order: 47 of 995)      

Cased Colt Model 1849 Pocket Percussion Revolver

Manufactured in 1856 with a brass cone front sight, "{ADDRESS SAML COLT/NEW YORK CITY}" on the barrel, "2" on the lower left side of the barrel lug, standard patent markings and stagecoach scene, "X" on the left side of the trigger guard at the rear, and all matching serial numbers, including in the back strap mortise of the grip. It comes in a wood presentation case with lead bullet/balls, a double sided eagle powder flask, cap tin, and Colt patent bullet mold. The key is stuck in the lock.

Class: Antique

Fine with 50% original blue finish on the barrel, gray and brown patina on the cylinder, 40% original case colors, 70% original silver plating on the grip straps, aged patinas on the silver and exposed brass, legible markings and cylinder scene, and mild overall wear including some light oxidation/pitting. The grip is also fine and has strong original varnished finish, light scratches and dings, and minor edge wear. Mechanically fine. The relined case and accessories are also very good.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,900.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt 3 1/2 Inch Round Barrel Pocket Model Conversion Revolver

Lot # 48 (Sale Order: 48 of 995)      

Colt 3 1/2 Inch Round Barrel Pocket Model Conversion Revolver

Reportedly 10,000 of these revolvers were manufactured c. 1873-1880 and sold into the 1880s. 6,500 of those were manufactured using converted percussion revolver parts, and the rest were built using original cartridge components. It has standard markings and features. The wedge is not numbered, but the other parts have the matching partial or full serial number. The back strap mortise is hand marked with "K. Coats" and the serial number.

Class: Antique

Fine with 85% frosted original nickel plating, some minor pitting, and minor scratches and marks. The lightly sanded grip is very good and has moderate handling wear, some stains, and edge wear. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 850.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Pocket Navy Conversion Revolver

Lot # 49 (Sale Order: 49 of 995)      

Colt Round Barrel Pocket Navy Conversion Revolver

Approximately 2,000 of these conversion revolvers were manufactured circa 1873-1875 using existing percussion revolvers or parts. This example has the standard markings including matching visible serial numbers.

Class: Antique

Fine. It retains 30% of original blue in the protected areas and otherwise has aged patina on the grip straps, mix of gray and brown patina on the balance, and some light oxidation/pitting. The grip has half of the original varnish, moderate lower edge wear, and some dents and light scratches. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

American Soldier Tintype with Colt Revolving Rifle

Lot # 50 (Sale Order: 50 of 995)      

Rare Tintype Image of an American Soldier Armed with a Colt Model 1855 Revolving Rifle

Installed with a viewable oval area 2 1/2 inches tall and 2 inches wide, this Sixth Plate tintype features an American enlisted man in full kit, with a light touch of blush on the cheeks and a "field encampment" themed background. In his hands is the Colt Model 1855 Revolving Rifle, which was known to have been purchased privately as well as acquired on limited contract (estimated less than 5,000 total) by the United States government, making it the first repeating rifle adapted by the Army. Examples are known to have been used during the Seminole Wars and the Civil War. While the usual accommodations for the image reversal of the tintype process have been made, the "SU" plate on the soldier's cartridge pouch and the reversed hammer on the Colt give away the flip. The glass-fronted frame is impressed/repoussed with Union-themed decoration, with a blue velvet pad and a 3 1/4 inch wide by 3 3/4 inch tall Gutta Percha case with scroll and patriotic motifs.

Class: Other

Very fine. Sharp detail is present in the image, especially in the face and armament of the soldier, and the casing shows mild wear and handling marks. The ultimate Colt revolving rifle image!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 40

1.178.0.761.2502f97.12.33