April Equipment, Machinery & Asset Sale
Auction closed.
Auction closed.
April Equipment, Machinery & Asset Sale
Auction closed.
Auction closed.
Description
Equipment sold in place in Washington, Oregon British Columbia & Texas. All items are sold in place at their location. Call Mick Odell at 206-542-4460 for questions on items or our service.
Closed Lots
Mettler Toledo 706 autolabeler
This is a Mettler Toledo 706 autolabler model 0700, SN 4647380-464,115 volt, 5.0 amp, 60 htz Made in USA working when taken out of service. Approx size 52" x 22" x 67" Located Snohomish WA.
1982 Nelson Marek 41' Racing Yacht
This is a 1982 Nelson Marek 41' racing yacht located in Vancouver WA at Steamboat Springs Marina, a gated community. Mooring is transferable and the monthly fee is $250.00, located on the Washington side of the Columbia River. Rampage is an award- winning racer Masthead Sloop, mono hull, Composite, one cabin with 8 berths and small kitchen, head, navigation station with ample storage for sails and gear. It also has a Raytheon depth meter, GPS with Loren, masthead wind indicator, ray marine close tracking, VHS Radio. It has a Perkins Diesel engine (needs some work), twin compasses, 4 tri-speed 8" self trailing, 2 dual speed 5" self trailing winches. It has a spinnaker pole, hydraulic boom vang, hydraulically adjustable backstay, hand yanked jib rigged with tuff-luff, tiller- operated. This Nelson Marek 41' racer is a real diamond in the ruogh and most boaters would recognize that when they see her. The reason for sale is health issues making it impossible for the owner to use it. It is quite a spartan craft and comes with extra sails. This would be a perfect craft for someone with the time to baby her and clean her up. This yacht is being sold in place and the winning buyer will be responsible for dock fees at that point or removing it from the water. This fine craft needs a few weekends of cleaning to bring her back and would be a great investment for someone to restore her and resell her, or spend many pleasant hours of sailing. Call Mick Odell 206-542-4460 or 604-800-9809 for more information.
Teco Westinghouse 150 HP Motor
This is a Teco Westinghouse 150 HP motor built for severe conditions in Canada. It is 150 hp, 1185 rpm, 575 volts, model #PDH15006TE5NR, SN LWAC11A070-2. It has been fully tested by EMSL Electric Motor Service Ltd, and a copy of the test is available. Located in New Westminster B.C Canada. Call Mick Odell 206-542-4460 or 604-800-9809 for more information.
2005 Utility 53' Reefer Trailer Used
This is a 2005 53' Utility reefer trailer with a Carrier Advance reefer unit, in good condition, located in Seattle WA. It has been FCMS inspected, VIN IUYVS25375M586454, licenced in N Carolina, 53' long and 13'6" high.
2008 Utility Custom Field Shop
This is a 2008 Utility custom oil field service trailer with 2 rooms including electrical room 6' x 8' and a main shop area. The electrical room is supplied by diesel to power the generator and all the wiring is there to power the unit once the generator is slipped in. The estimated cost to build this unit is $60,000.00 with the additions. It looks like it has hardly used and has less than a thousand miles on the trailer; the generator that was removed has 950 hours on it and the trailer has been parked for some time. The front generator room is complete with cooler-grade steel door and all hardware, exhaust system, vented, fully insulated, electric powered furnace and air conditioner. Fully wired throughout with many outlets in the interior lighting and power for compressors, exterior rear lighting and exterior power feeds. Floodlights for landing with custom built aluminum fold- up stairs with railing. Heavy gauge steel work benches on both sides (25'), 2 heavy duty foam vinyl covered mattresses for first aid station. Two fire extinguishers, steel storage cabinets, overhead steel I-beams for electric one-ton cranes (not included).
DCA45 Whisperwatt Diesel AC Generator
This is a skid mounted DCA45 Whisperwatt diesel AC generator in like-new condition, well maintained by large oil service company in Texas. It is 4-cyl., 4-cycle Isuzu BB engine with fuel tank. Unit has been enclosed in a heated & vented van trailer all of its life and was used to power in a portable work shop within a trailer. It is a 2008, manufactured by Multiquip, Model 36KW, 950 hrs. and is in great used condition. FOB Dallas Texas.
2013 International Workstar 7300 Cab & Chassis, CNG (#1 of 3)
This is a 2013 International Workstar 7300 Cab & chassis, VIN 1HTZZSDR9DJ547971, 3,424 miles, one of three identical CNG units (see Lots 7B and 7C) located in Celina Texas. These trucks originally had a service body, and all have been inspected and fully serviced by an International dealer, including fluids, and all major mechanical components have a clean bill of health, including the fuel system. Inspection & service reports are available for your review. These trucks sold for $90,000 originally, they have DT466 diesel OEM engines, ESI modified Navistar DT466E with patented parts, a proprietary electronic control unit and electronic throttle body. The rating is 285 HP and 820 pounds/feet, has been certified by EPA and California Air Resources board to more than meet emissions limits. They have crew cab, Allison 5-speed transmission, air brakes, spring suspension and Goodyear tires, FOB Fort Worth Texas.
2013 International Workstar 7300 Cab & Chassis, CNG (#2 of 3)
This is a 2013 International Workstar 7300 Cab & chassis, VIN 1HTZZSDR0DJ647972, 7,218 miles, one of three identical CNG units (see Lots 7A and 7C) located in Celina Texas. These trucks originally had a service body, and all have been inspected and fully serviced by an International dealer, including fluids, and all major mechanical components have a clean bill of health, including the fuel system. Inspection & service reports are available for your review. These trucks sold for $90,000 originally, they have DT466 diesel OEM engines, ESI modified Navistar DT466E with patented parts, a proprietary electronic control unit and electronic throttle body. The rating is 285 HP and 820 pounds/feet, has been certified by EPA and California Air Resources board to more than meet emissions limits. They have crew cab, Allison 5-speed transmission, air brakes, spring suspension and Goodyear tires, FOB Fort Worth Texas.
2013 International Workstar 7300 Cab & Chassis, CNG (#3 of 3)
This is a 2013 International Workstar 7300 Cab & chassis, VIN 1HTZZSDR7DJ647970, 23,725 miles, one of three identical CNG units (see Lots 7A and 7B) located in Celina Texas. These trucks originally had a service body, and all have been inspected and fully serviced by an International dealer, including fluids, and all major mechanical components have a clean bill of health, including the fuel system. Inspection & service reports are available for your review. These trucks sold for $90,000 originally, they have DT466 diesel OEM engines, ESI modified Navistar DT466E with patented parts, a proprietary electronic control unit and electronic throttle body. The rating is 285 HP and 820 pounds/feet, has been certified by EPA and California Air Resources board to more than meet emissions limits. They have crew cab, Allison 5-speed transmission, air brakes, spring suspension and Goodyear tires, FOB Fort Worth Texas.
FRM-1120C Horizontal Band Sealer Used
This is an FRM-1120C S/S tilt head horizontal band sealer in good used working condition. This free standing, right feed, tilt head horizontal band sealer, stainless steel packing machine is located in Lynnwood WA. Specifications are: Power 110/60Hz, motor power 100W, Sealing Speed 0-394 inches per minute, Seal Width 8MM, Temp Range 0-300 degrees Centigrade, Sealing Power 300 x 2, Conveyor Size 43" x 8", Max Conveyor Load 16.5 lbs., Printing Heating Power (W) 40 X 2, Printing Options 20 characters/line, Dimensions 43" x 24" x 41", Weight 187 lbs., FOB Lynnwood WA.
Card Rack Fixtures, Used (Oregon)
This is a lot of 16 used four-foot gondola sections located in St. Helens, OR.
Knight Safe, Used (Portland, OR)
This is a Knight brand safe in good used condition, both key & combination lock, 24" x 27" x 22", approx. 450 lbs., FOB Portland, OR.
Victoria Safe & Lock Co. Safe, Used
This is a vintage Victoria Safe & Lock Co. safe on wheels in good used condition, 22" x 23" x 30" (combination), FOB Portland, OR.
True Refrigerated Milk Cooler, Used
This is a good used working True refrigerated milk cooler, 47" x 29" x 79", located in Portland, OR (ap 5)
True Two-Door Milk & Dairy Cooler, Used
This is a True two-door milk & dairy cooler in good used working condition, 53' x 29" x 70", located in Portland, OR (AP6)
True 2-Door Refrigerator Used (two available)
Quantity: 2
We have 2 True 2 door refrigerators in good used working condition 47" x 21" x 60" located in Portland Ore .
Duraheat Forced Air Heater 180.000 BTU
This is a Duraheat forced air heater 180.000 BTU operates on Kero and is completely portable and is new in the box.It has ready to go technology,heavy duty wheels & handles,run time fuel gauge ,air pressure gauge and operates in extreme cold and will heat up to 4.300 SF and retails for $390.00 Ea and is approx 42" x 18" x 20" and is 75 Lb
Summit Lab Freezers Used Portland OR
Quantity: 2
This is a Summit lab freezer in good used working condition 20" x 17" x 19" used in a Pharmacy located in Portland OR.
Lot of 113 Totes of Assorted Display Pegs
This is a lot of 113 tote boxes of assorted size display pegs for gondola shelving in assorted sizes & uses; thousands in lot located in Portland OR. (AP 24)
Powermatic Bandsaw 87, Used
This is a Powermatic bandsaw model 87 in good used working condition, located in Mukilteo, WA. It is approx. 1,300 lbs., S/N 8987046; blades are 12.7" max. or 12.5" min. FOB Mukilteo, WA.
Bridgeport Romi EZ Path Used w/Toolbox
This is a Bridgport Romi EZ Path CNC Lathe located in Mukilteo, WA, in good used working condition, SN 002-077935-325, approx. 89" x 51" x 68". It comes with a 5-drawer toolbox, with chucks and operation manuals, 48" x 24" x 32". FOB Mukilteo, WA.
Merit 5 Electric Wheel Chair Used
This is a Merit 5 electric wheel chair located in Mukilteo, WA. It is in good working condition and is approx. 32" x 29" x 44".
2012 Miller Dimensions 452 Welder Used
We have a 2012 Miller Dimensions 452 welder that has been fully tested and serviced located in Surrey B.C. It can be seen by Appointment; call Mick Odell 206-542-4460 or 604 - 800-9809 for availability.
2006 Flygt 6" Pump Used
This is a 2006 Flygt 6" pump in very good condition, located in Surrey, B.C. It has been tested & serviced and test results are available. It can be seen by appointment; call Mick Odell 206-542-4460 or 604-800-9809 for availability.
Lot of Four Extreme Duty Loader Tires
This is a lot of four extreme duty Performax loader tires, located in Texas, rated L3/E3 for extreme duty, size 23.5R25. Call Mick Odell for availability at 206-542-4460 or 604-800-9809.