Amoskeag Auction Company, Inc. » Auction No. 115 Featuring Fine Collectible Arms
Auction No. 115 Featuring Fine Collectible Arms

Auction No. 115 Featuring Fine Collectible Arms

Saturday, August 26, 2017  |  9:00 AM Eastern
Auction closed.
Auction No. 115 Featuring Fine Collectible Arms

Auction No. 115 Featuring Fine Collectible Arms

Saturday, August 26, 2017  |  9:00 AM Eastern
Auction closed.
Internet Premium: 20.5%
See Special Terms for additional fees
Cash Payment Discount: 2.5%
Manchester, NH
 
Share:

Description

This sale by Amoskeag Auction Company features over 1000 lots of rare and historic firearms. View the entire catalog here.

Amoskeag Auction Company, Inc.

(603) 627-7383
Catalog Terms of sale
Search Catalog :
Search
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 44

German Drilling Combination Gun by Fortuna

German Drilling Combination Gun by Fortuna

Lot # 26 (Sale Order: 26 of 1099)      

Low Estimate: 2,000High Estimate: 3,000
serial #962384, 16 ga. x 7x65R with 22 magnum sub caliber chamber insert. 24 3/4" barrels with bright excellent bores in all, the shotgun bores choked modified and full. The barrels on this quality Suhl-made drilling retain about 95% original blue, the loss is due primarily just to even light fading, with some very light muzzle wear. The coin-finished frame rates excellent with some light darkening to pewter on the carry point of the frame. Both triggerguard and top lever retain very good original blue. The frame shows very nice quality deeply engraved game scenes left and right of a bellowing stag and waterfowl, these surrounded by open foliate scroll in geometric engraving with the Thuringen Wald trademark also used by Merkel on the belly of the gun. The European walnut hog back Schweinsrucken comb stock and splinter style forend rate very good plus with only sparsely scattered very light handling marks. The stock features a rounded shadowline cheekpiece with capped pistolgrip and 1" ventilated recoil pad giving a 14 1/4" length of pull; the stock remains uncut and if one wished to put on a more traditional horn buttplate they easily could. The arm is sighted with a silver bead front sight and automatic flip-up rear sight when rifle barrel is actuated. There are professionally fitted dual claw bases for telescopic sight mounting, with two sets of front bases for longer and shorter tube scopes, the rear set mounting a nice Carl Zeiss Diatal-D 4x32 telescopic sight with thick three-post German reticle and clear optics. The scope itself rates very good plus with only minor fading and some light handling marks. The arm is equipped with double set triggers, the front being a single set, cocking indicators, tang-mounted barrel selector, extractors, Greener safety and sling swivels. Overall a really well-executed and quality drilling, made in the same plant as Merkels and Sauers frames, proofed in 1971. (38413-81) {MODERN}
serial #962384, 16 ga. x 7x65R with 22 magnum sub caliber chamber insert. 24 3/4" barrels with bright excellent bores in all, the shotgun bores choked modified and full. ...moreThe barrels on this quality Suhl-made drilling retain about 95% original blue, the loss is due primarily just to even light fading, with some very light muzzle wear. The coin-finished frame rates excellent with some light darkening to pewter on the carry point of the frame. Both triggerguard and top lever retain very good original blue. The frame shows very nice quality deeply engraved game scenes left and right of a bellowing stag and waterfowl, these surrounded by open foliate scroll in geometric engraving with the Thuringen Wald trademark also used by Merkel on the belly of the gun. The European walnut hog back Schweinsrucken comb stock and splinter style forend rate very good plus with only sparsely scattered very light handling marks. The stock features a rounded shadowline cheekpiece with capped pistolgrip and 1" ventilated recoil pad giving a 14 1/4" length of pull; the stock remains uncut and if one wished to put on a more traditional horn buttplate they easily could. The arm is sighted with a silver bead front sight and automatic flip-up rear sight when rifle barrel is actuated. There are professionally fitted dual claw bases for telescopic sight mounting, with two sets of front bases for longer and shorter tube scopes, the rear set mounting a nice Carl Zeiss Diatal-D 4x32 telescopic sight with thick three-post German reticle and clear optics. The scope itself rates very good plus with only minor fading and some light handling marks. The arm is equipped with double set triggers, the front being a single set, cocking indicators, tang-mounted barrel selector, extractors, Greener safety and sling swivels. Overall a really well-executed and quality drilling, made in the same plant as Merkels and Sauers frames, proofed in 1971. (38413-81) {MODERN}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

J. P. Sauer and Sohn Drilling Combination Gun

J. P. Sauer and Sohn Drilling Combination Gun

Lot # 27 (Sale Order: 27 of 1099)      

Low Estimate: 2,000High Estimate: 3,000
serial #G3112, 16 ga. x 7x65R, 25 1/2" barrels with bright excellent bores, the shotgun barrels choked modified and full. The barrels retain about 97% original blue, the loss due to even fading along with the widely scattered light handling mark here and there. The coin-finished frame remains excellent with engraved games scenes left and right of a bellowing stag and rehbock, surrounded by loose flowing scroll and geometric embellishment. The checkered walnut capped pistolgrip European walnut buttstock with hog back Schweinsrucken comb and splinter style forend rate about excellent showing only the sparsely scattered very light handling marks that come from a hunted arm. The stock features a rounded left side shadowline cheekpiece, capped grip and the 1" ventilated recoil pad gives a 14 3/4" length of pull. The rifle is sighted with a simple bead front sight and lever actuated flip-up rear sight when rifle barrel is selected. The dual claw bases on the rib mount a Nickel Supra Variabel 1.5-6 telescopic sight with heavy three post German reticle and bright excellent optics. The scope itself rates about excellent with perhaps a very light handling mark or two. The arm features double triggers, the front being a single set, cocking indicators, tang-mounted barrel selector, Greener safety and sling swivels; there is a tiny crack in the plastic triggerguard at its rear tang. Proofed in 1966, this is a solid and very attractive Sauer & Sohn drilling. (38413-11) {C&R}
serial #G3112, 16 ga. x 7x65R, 25 1/2" barrels with bright excellent bores, the shotgun barrels choked modified and full. The barrels retain about 97% original blue, the ...moreloss due to even fading along with the widely scattered light handling mark here and there. The coin-finished frame remains excellent with engraved games scenes left and right of a bellowing stag and rehbock, surrounded by loose flowing scroll and geometric embellishment. The checkered walnut capped pistolgrip European walnut buttstock with hog back Schweinsrucken comb and splinter style forend rate about excellent showing only the sparsely scattered very light handling marks that come from a hunted arm. The stock features a rounded left side shadowline cheekpiece, capped grip and the 1" ventilated recoil pad gives a 14 3/4" length of pull. The rifle is sighted with a simple bead front sight and lever actuated flip-up rear sight when rifle barrel is selected. The dual claw bases on the rib mount a Nickel Supra Variabel 1.5-6 telescopic sight with heavy three post German reticle and bright excellent optics. The scope itself rates about excellent with perhaps a very light handling mark or two. The arm features double triggers, the front being a single set, cocking indicators, tang-mounted barrel selector, Greener safety and sling swivels; there is a tiny crack in the plastic triggerguard at its rear tang. Proofed in 1966, this is a solid and very attractive Sauer & Sohn drilling. (38413-11) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1877 Lightning Double Action Revolver

Cased Colt Model 1877 Lightning Double Action Revolver

Lot # 28 (Sale Order: 28 of 1099)      

Low Estimate: 1,800High Estimate: 2,200
serial #95311, 38 Colt, 4 1/2" barrel with a bright about excellent bore which shows sharp rifling but with a few spots of very sparsely scattered light oxidation or perhaps light pinprick pitting. The barrel and ejector rod housing retain perhaps 95% original blue, the loss is due primarily to even fading and some light oxidation in the area of the barrel roll marking which has left very light pinprick pitting. The cylinder is a pleasing mix of fading original blue and plum-brown flaking, also with some very minor rotational rings and scattered light oxidation staining showing a few spots of very light pitting. The frame retains about 97% original color case-hardening which is quite vivid in spots and drifting only slightly on the left recoil shield. There are a few spots of sparsely scattered very light oxidation and two small areas of pitting on the right of the frame below the loading gate; the loading gate is a dull pewter gray patina showing some very light oxidation or pinprick pitting. The backstrap and triggerguard show about 90-92% original blue, the loss due to even fading and toning to a plum brown on the bow of the guard. The spine of the hammer shows some brilliant pale fire temper blue with the bright-polished sides showing light oxidation staining, the trigger still with strong pale blue. The checkered hard rubber Rampant Colt grips rate very good with light wear to the points, worn smooth along the sharp edges of the contour of the birdshead grip; they are un-numbered but fit precisely. The gun seems to function well mechanically. The revolver comes cased in an older mahogany presentation case with amethyst-colored baize lining and 18-place cartridge block. The case includes the key and rates very fine-excellent overall. Really a very nice lightning overall, still in a very fine state of condition, very attractively cased. (38346-1) {ANTIQUE}[Richard Grundhofer Collection]
serial #95311, 38 Colt, 4 1/2" barrel with a bright about excellent bore which shows sharp rifling but with a few spots of very sparsely scattered light oxidation or perh...moreaps light pinprick pitting. The barrel and ejector rod housing retain perhaps 95% original blue, the loss is due primarily to even fading and some light oxidation in the area of the barrel roll marking which has left very light pinprick pitting. The cylinder is a pleasing mix of fading original blue and plum-brown flaking, also with some very minor rotational rings and scattered light oxidation staining showing a few spots of very light pitting. The frame retains about 97% original color case-hardening which is quite vivid in spots and drifting only slightly on the left recoil shield. There are a few spots of sparsely scattered very light oxidation and two small areas of pitting on the right of the frame below the loading gate; the loading gate is a dull pewter gray patina showing some very light oxidation or pinprick pitting. The backstrap and triggerguard show about 90-92% original blue, the loss due to even fading and toning to a plum brown on the bow of the guard. The spine of the hammer shows some brilliant pale fire temper blue with the bright-polished sides showing light oxidation staining, the trigger still with strong pale blue. The checkered hard rubber Rampant Colt grips rate very good with light wear to the points, worn smooth along the sharp edges of the contour of the birdshead grip; they are un-numbered but fit precisely. The gun seems to function well mechanically. The revolver comes cased in an older mahogany presentation case with amethyst-colored baize lining and 18-place cartridge block. The case includes the key and rates very fine-excellent overall. Really a very nice lightning overall, still in a very fine state of condition, very attractively cased. (38346-1) {ANTIQUE}[Richard Grundhofer Collection]

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,900.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Exceptional and Rare Colt John Wayne Commemorative Presentation Model Single Action Army Revolver

Exceptional and Rare Colt John Wayne Commemorative Presentation Model Single Action Army Revolver

Lot # 29 (Sale Order: 29 of 1099)      

Low Estimate: 15,000High Estimate: 20,000
serial #JW-P55, 45 Colt, 4 3/4" barrel with an as-new, un-fired bore. All of the metal surfaces on this astonishing revolver retain all their original deep factory blue and gold-plated finishes. John Wayne, "The Duke", needs no introduction here. To commemorate this larger-than-life actor, American, cowboy and man's-man, Colt Firearms Company, in 1982, issued the John Wayne Commemorative Single Action Army revolver. While the standard model is fairly common, the deluxe models are very seldom-encountered on the secondary market. Presentation models trading on the open market are virtually unheard of. Originally slated for a very limited production run of 100 revolvers, Colt records indicate that a scant 47 only were actually produced. In addition to the lovely flowing open scroll on barrel and frame, the hammer, the ejector rod, base pin, trigger, triggerguard and backstrap are all heavily plated in genuine 24 karat gold. The presentation edition features a deep relief-chiseled gold inlaid American Eagle on the left side of the barrel with "John Wayne" in riband in its beak. The left recoil shield features a nice circular flat with a gold inlaid chiseled relief of the man himself with his signature hat and a neckerchief (bandanna). The unfluted cylinder has three fine gold wire inlays, the leading one at front of cylinder interrupted with geometric designs. The left side of cylinder shows the tall man, striding along, his silhouette on the ground, the right side with Colts famous Rampant Colt trademark, these inlaid in fine gold. Gold wire embellishments continue on the frame and The Duke's signature is neatly engraved along the backstrap. The interior of the grip is signed by Colt factory engraver "George Spring", Colt's head of engraving. The arm wears lovely two-piece factory fleur-de-lis checkered ivory grips, showing nice grain and some nice age crackling along their butts, they are factory-numbered to the gun. The revolver is as-new, un-turned since leaving the Colt factory. The issue walnut display case is included with glass sides and top, rotating on a 360° pedestal. The top panel is etched with the Colt trademark and the interior is a lovely French-fitted Burgundy baize. Colt factory accessories include an ivory oil bottle with the Colt logo on its lid, ivory-handle bore bristle brush, ivory-handled wiper and ivory-handled turn screw, all of the metal components being heavily 24 karat gold plated as well. There is a blued steel plaque within, neatly engraved and gold inlaid with the same motif as is found on the cylinder. The case itself rates about excellent with a few very light handling marks on the lid and a drying crack on one end of the base. Included with the gun is its original wood-grain box with Styrofoam inserts and Colt custom shop end label serial numbered to the gun; the original octagonal hangtag is within (the end flap has become detached from the box but clearly belongs to it). The manufacturer’s suggested retail pricing for these arms in 1982 was $20,000. Overall likely a once-in-a-lifetime chance to own an extremely rare piece of Colt factory art commemorating one of the greatest Americans of a generation. (38381-5) {C&R}
serial #JW-P55, 45 Colt, 4 3/4" barrel with an as-new, un-fired bore. All of the metal surfaces on this astonishing revolver retain all their original deep factory blue a...morend gold-plated finishes. John Wayne, "The Duke", needs no introduction here. To commemorate this larger-than-life actor, American, cowboy and man's-man, Colt Firearms Company, in 1982, issued the John Wayne Commemorative Single Action Army revolver. While the standard model is fairly common, the deluxe models are very seldom-encountered on the secondary market. Presentation models trading on the open market are virtually unheard of. Originally slated for a very limited production run of 100 revolvers, Colt records indicate that a scant 47 only were actually produced. In addition to the lovely flowing open scroll on barrel and frame, the hammer, the ejector rod, base pin, trigger, triggerguard and backstrap are all heavily plated in genuine 24 karat gold. The presentation edition features a deep relief-chiseled gold inlaid American Eagle on the left side of the barrel with "John Wayne" in riband in its beak. The left recoil shield features a nice circular flat with a gold inlaid chiseled relief of the man himself with his signature hat and a neckerchief (bandanna). The unfluted cylinder has three fine gold wire inlays, the leading one at front of cylinder interrupted with geometric designs. The left side of cylinder shows the tall man, striding along, his silhouette on the ground, the right side with Colts famous Rampant Colt trademark, these inlaid in fine gold. Gold wire embellishments continue on the frame and The Duke's signature is neatly engraved along the backstrap. The interior of the grip is signed by Colt factory engraver "George Spring", Colt's head of engraving. The arm wears lovely two-piece factory fleur-de-lis checkered ivory grips, showing nice grain and some nice age crackling along their butts, they are factory-numbered to the gun. The revolver is as-new, un-turned since leaving the Colt factory. The issue walnut display case is included with glass sides and top, rotating on a 360° pedestal. The top panel is etched with the Colt trademark and the interior is a lovely French-fitted Burgundy baize. Colt factory accessories include an ivory oil bottle with the Colt logo on its lid, ivory-handle bore bristle brush, ivory-handled wiper and ivory-handled turn screw, all of the metal components being heavily 24 karat gold plated as well. There is a blued steel plaque within, neatly engraved and gold inlaid with the same motif as is found on the cylinder. The case itself rates about excellent with a few very light handling marks on the lid and a drying crack on one end of the base. Included with the gun is its original wood-grain box with Styrofoam inserts and Colt custom shop end label serial numbered to the gun; the original octagonal hangtag is within (the end flap has become detached from the box but clearly belongs to it). The manufacturer’s suggested retail pricing for these arms in 1982 was $20,000. Overall likely a once-in-a-lifetime chance to own an extremely rare piece of Colt factory art commemorating one of the greatest Americans of a generation. (38381-5) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 11,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Wonderful Colt John Wayne Commemorative Deluxe Model Single Action Army Revolver

Wonderful Colt John Wayne Commemorative Deluxe Model Single Action Army Revolver

Lot # 30 (Sale Order: 30 of 1099)      

Low Estimate: 7,000High Estimate: 9,000
serial #JW-D55, 45 Colt, 4 3/4" barrel with a bright excellent, unfired, bore. The metal surfaces on this stunning revolver retain all of their original factory silver plate. The revolver has a lovely pink-purple tarnished silver patina and features lovely loose flowing scroll with background punch-dot shading. An absolutely limited-edition, originally intended to be a release of 500 revolvers, only 90 total were built with a manufacturer's suggested retail price of $10,000 in 1982. The left side of the barrel features a deep relief-chiseled gold inlaid American Eagle with "John Wayne" in riband held in its beak. The left side recoil shield features a holstered Single Action Army and gun belt in deep relief-chiseled 18 karat gold with background punch-dot shading. The right side loading gate has a pair of chiseled-in-relief spurs in silver, also with background punch dot accenting shading. The cylinder features gold inlaid vignettes of the Duke himself, backed by the Stars & Stripes, an iconic and well-known image; the right side of cylinder shows Wayne astride his horse, Dollor. Wayne's signature is neatly engraved up the backstrap along with silver and gold inlaid shield, this example signed by iconic Colt engraver Alvin White "AA White" along the inside of the butt strap. The grips are smooth ebony, the left is neatly inlaid with an ivory scrimmed medallion with "Colt" in fancy script; they are assembly-numbered to the gun. The revolver is as-new, un-turned to since leaving the Colt factory. The issue walnut display case is included with glass sides and top, rotating on a 360° pedestal. The top panel is etched with the Colt trademark and shows a tiny bit of loss to the etching or sandblasting. The interior is a lovely French-fitted lime green baize with Colt factory accessories included featuring: an ebony oil bottle, ebony accessory box, ebony bore bristle brush, ebony wiper and ebony turn screw, all of the metal components being heavily brightly nickel plated. There is a blued steel plaque within, neatly engraved and gold inlaid with the same motif as is found on the presentation model cylinder. The case itself rates about excellent with a few very light handling marks here there on the lid. Included with the gun is its original wood-grain box with Styrofoam inserts and papers and Colt custom shop end, the writing is no longer legible. With an original issue price of $10,000 in 1982, and less than 100 of these beautifully-executed arms being made, this is an extremely rare opportunity for the advanced Colt collector to obtain one of the finest revolvers they've ever produced, by arguably one of their finest, if not the finest, engraver, ever employed by Colt. (38381-6) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Wonderful Moore's Patent Firearms Front-Loading Teat Fire Revolver

Wonderful Moore's Patent Firearms Front-Loading Teat Fire Revolver

Lot # 31 (Sale Order: 31 of 1099)      

Low Estimate: 1,500High Estimate: 2,000
serial #9453, .32 caliber teat fire, 3 1/4" barrel with a bright excellent bore. This is likely the finest Moore's frontloading revolver that we have encountered. The barrel retains a strong 50% bright original blue, the loss due to some contaminant which has caused spotty flaking of the barrel, but the strong blue around the forcing cone and the bright metal at its face suggest this gun was never fired; it is Moore's Firearms Company and Brooklyn New York marked. The pivoting cartridge loading arm on the right lower side of the barrel retains all its original purple-hue fire temper and the cylinder retains about 97% original bright blue, the loss due to some very lightly flaked areas, the chambers and face of the cylinder immaculate and un-scorched. The frame retains nearly all its original silver plate which has darkened and tarnished to a lovely deep blue hue, the very few flaked areas showing a goldenrod patina beneath. The hammer retains strong original color case-hardening with the trigger showing smoky mottled colors. The grips appear very much to be rosewood and rate excellent with only minor flaking or tiny dings here and there from the years, they are assembly-numbered to the gun. Indeed all of the parts, frame, arbor, barrel, cylinder and wedge are all assembly numbered alike. The gun times and locks up well however the trigger return spring is damaged as the arm will only hold on cock if forward tension is put on the trigger, this would be an extremely easy fix for any competent 'smith. Really a very stunning high condition Moore's frontloading revolver. (38341-2) {ANTIQUE}
serial #9453, .32 caliber teat fire, 3 1/4" barrel with a bright excellent bore. This is likely the finest Moore's frontloading revolver that we have encountered. The bar...morerel retains a strong 50% bright original blue, the loss due to some contaminant which has caused spotty flaking of the barrel, but the strong blue around the forcing cone and the bright metal at its face suggest this gun was never fired; it is Moore's Firearms Company and Brooklyn New York marked. The pivoting cartridge loading arm on the right lower side of the barrel retains all its original purple-hue fire temper and the cylinder retains about 97% original bright blue, the loss due to some very lightly flaked areas, the chambers and face of the cylinder immaculate and un-scorched. The frame retains nearly all its original silver plate which has darkened and tarnished to a lovely deep blue hue, the very few flaked areas showing a goldenrod patina beneath. The hammer retains strong original color case-hardening with the trigger showing smoky mottled colors. The grips appear very much to be rosewood and rate excellent with only minor flaking or tiny dings here and there from the years, they are assembly-numbered to the gun. Indeed all of the parts, frame, arbor, barrel, cylinder and wedge are all assembly numbered alike. The gun times and locks up well however the trigger return spring is damaged as the arm will only hold on cock if forward tension is put on the trigger, this would be an extremely easy fix for any competent 'smith. Really a very stunning high condition Moore's frontloading revolver. (38341-2) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Exceptional Manhattan Firearms Company Navy Model Percussion Revolver

Exceptional Manhattan Firearms Company Navy Model Percussion Revolver

Lot # 32 (Sale Order: 32 of 1099)      

Low Estimate: 2,000High Estimate: 4,000
serial #4675, .36 cal., 5" barrel with an excellent bright bore. This rare barrel length retains about 98% factory blue with light edge wear and flaking on the left flat near the muzzle. The muzzle is still bright with light oxidation on the factory polish. The breech remains bright, the bore showing good original blue and the rear face of the barrel has all its original blue showing a couple of light spots of oxidation. The loading lever and ram show excellent original color case-hardening, even the wedge shows lovely purple pale fire temper blue. The five-shot, ten-stop cylinder has worn to an interesting copper-tone with generous flecks of original finish on most of the panel scenes with strong remnants of blue in the chambers and even surrounding the nipples. The frame and hammer retain about 99% original vivid color case-hardening with some light high edge wear at the capping cut and a couple of small flecks on the frame. The triggerguard retains about 95% factory silver plate while the backstrap has toned primarily to a dull ochre patina. The backstrap is neatly engraved in flowing cursive script "J.J. Stapfer". The one-piece walnut grip rates excellent with all of its original varnish showing only a tiny flake at the rear right edge and another small spot at the rear left exhibiting some very old synthetic filler. Many of the screws show remnants of a pale dark straw-purple-tone fire blue. Inexplicably the triggerguard, backstrap, barrel, wedge, cylinder and grips are all numbered "5175". The parts fit wonderfully and appear to have been married together for some time. Only the frame and arbor are numbered one another. Lock up is tight but the hand is missing and the cylinder will not advance. There are not many Stapfer's to be found and a quick check of the U.S. Census record reveals in the Division 16 District U.S. Federal Tax record a John J. Stapfer lived on 313 Bloomfield ST., Hoboken, N.J. in 1865 and 1866. He was liable for Federal Excise Tax due to "income" and "watches"; perhaps an importer of the latter as his last name was probably more common in Switzerland and Germany. An absolutely superb Manhattan with a rare barrel length, sadly slightly mismatched. (88357-7) {ANTIQUE}
serial #4675, .36 cal., 5" barrel with an excellent bright bore. This rare barrel length retains about 98% factory blue with light edge wear and flaking on the left flat ...morenear the muzzle. The muzzle is still bright with light oxidation on the factory polish. The breech remains bright, the bore showing good original blue and the rear face of the barrel has all its original blue showing a couple of light spots of oxidation. The loading lever and ram show excellent original color case-hardening, even the wedge shows lovely purple pale fire temper blue. The five-shot, ten-stop cylinder has worn to an interesting copper-tone with generous flecks of original finish on most of the panel scenes with strong remnants of blue in the chambers and even surrounding the nipples. The frame and hammer retain about 99% original vivid color case-hardening with some light high edge wear at the capping cut and a couple of small flecks on the frame. The triggerguard retains about 95% factory silver plate while the backstrap has toned primarily to a dull ochre patina. The backstrap is neatly engraved in flowing cursive script "J.J. Stapfer". The one-piece walnut grip rates excellent with all of its original varnish showing only a tiny flake at the rear right edge and another small spot at the rear left exhibiting some very old synthetic filler. Many of the screws show remnants of a pale dark straw-purple-tone fire blue. Inexplicably the triggerguard, backstrap, barrel, wedge, cylinder and grips are all numbered "5175". The parts fit wonderfully and appear to have been married together for some time. Only the frame and arbor are numbered one another. Lock up is tight but the hand is missing and the cylinder will not advance. There are not many Stapfer's to be found and a quick check of the U.S. Census record reveals in the Division 16 District U.S. Federal Tax record a John J. Stapfer lived on 313 Bloomfield ST., Hoboken, N.J. in 1865 and 1866. He was liable for Federal Excise Tax due to "income" and "watches"; perhaps an importer of the latter as his last name was probably more common in Switzerland and Germany. An absolutely superb Manhattan with a rare barrel length, sadly slightly mismatched. (88357-7) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Manhattan Firearms Company Navy Model Percussion Revolver

Manhattan Firearms Company Navy Model Percussion Revolver

Lot # 33 (Sale Order: 33 of 1099)      

Low Estimate: 1,800High Estimate: 2,200
serial #69064, .36 cal., 4" octagon barrel with strong rifling but sparsely scattered light pitting or oxidation. This late production series IV revolver remains in attractive condition. The barrel has crisp two-line Newark address and retains about 92% factory blue with loss primarily due to wear and oxidation blemishes mostly on the right side. The five shot ten-slot cylinder has the similar loss in addition to pinprick pitting with the surfaces showing a 50% mottled mix of pewter, purple and blue plus crisp scenes overall with the cavalry-infantry charge slightly light. The frame still has strong swirls of case-hardened colors but is muting to pewter. The loading lever rates about the same as the frame but the hammer has very strong colors partially masked by scattered freckling for about 85% case-hardened colors remaining. The backstrap and triggerguard frame have nearly 97% silver plate with light edge wear. The smooth one-piece factory walnut grips rate very good to excellent with a few areas of flaking finish and wear along the lower edges. All appropriate parts and the grips are correctly numbered to the gun with the exception of the rammer (#8958), the standing breech is not drilled and tapped for a spring plate and the gun remains fully functional. Overall, an attractive Navy with great condition. (88357-8) {ANTIQUE}
serial #69064, .36 cal., 4" octagon barrel with strong rifling but sparsely scattered light pitting or oxidation. This late production series IV revolver remains in attra...morective condition. The barrel has crisp two-line Newark address and retains about 92% factory blue with loss primarily due to wear and oxidation blemishes mostly on the right side. The five shot ten-slot cylinder has the similar loss in addition to pinprick pitting with the surfaces showing a 50% mottled mix of pewter, purple and blue plus crisp scenes overall with the cavalry-infantry charge slightly light. The frame still has strong swirls of case-hardened colors but is muting to pewter. The loading lever rates about the same as the frame but the hammer has very strong colors partially masked by scattered freckling for about 85% case-hardened colors remaining. The backstrap and triggerguard frame have nearly 97% silver plate with light edge wear. The smooth one-piece factory walnut grips rate very good to excellent with a few areas of flaking finish and wear along the lower edges. All appropriate parts and the grips are correctly numbered to the gun with the exception of the rammer (#8958), the standing breech is not drilled and tapped for a spring plate and the gun remains fully functional. Overall, an attractive Navy with great condition. (88357-8) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cooper Navy Model Double Action Percussion Revolver

Cooper Navy Model Double Action Percussion Revolver

Lot # 34 (Sale Order: 34 of 1099)      

Low Estimate: 1,800High Estimate: 2,000
serial #2347, .36 cal., 4" octagon barrel with an excellent bore exhibiting a few minor traces of oxidation. The barrel retains about 90

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce Colt New Service Target Revolver

Scarce Colt New Service Target Revolver

Lot # 35 (Sale Order: 35 of 1099)      

Low Estimate: 3,500High Estimate: 4,500
serial #333379, 44 Special, scarce 6" barrel with an excellent bore. This delightful revolver was produced in 1932 and has the seldom seen shorter barrel. The metal surfaces retain about 97% factory blue with limited high edge wear, a few scratches, turn ring on the cylinder and handling marks. The un-numbered checkered walnut factory square butt grips with silver Colt medallions rate excellent with one tiny spot of compressed diamond points. The revolver features an elevation adjustable Patridge front sight and a windage adjustable black blade rear sight. As was common on Target Models the left side barrel is simply marked "NEW SERVICE
serial #333379, 44 Special, scarce 6" barrel with an excellent bore. This delightful revolver was produced in 1932 and has the seldom seen shorter barrel. The metal surfa...moreces retain about 97% factory blue with limited high edge wear, a few scratches, turn ring on the cylinder and handling marks. The un-numbered checkered walnut factory square butt grips with silver Colt medallions rate excellent with one tiny spot of compressed diamond points. The revolver features an elevation adjustable Patridge front sight and a windage adjustable black blade rear sight. As was common on Target Models the left side barrel is simply marked "NEW SERVICE

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Sharps Model 1853 Percussion Sporting Rifle

Sharps Model 1853 Percussion Sporting Rifle

Lot # 36 (Sale Order: 36 of 1099)      

Low Estimate: 2,500High Estimate: 3,500
serial #8070, about .37 caliber or 90 bore, 26" octagon barrel with a very good bore that shows strong deep rifling. This rifle features factory adjustable double set triggers along with a factory triggerplate mounted sling staple and ring. The rifle features matching number "8070" on the frame, barrel, inside of patchbox door, breechblock, inside heel of butt and in pencil on the endgrain of the buttstock. The metal surfaces were lightly cleaned long ago and are presently a mostly even gray patina with some scattered light oxidation staining and some very fine pin prick pitting. The top tang has a vacant hole which appears to be original and for a tang sight that is no longer present. The barrel marking is partially visible and the frame marking is mostly visible. The walnut buttstock and pewter tipped forend rate very good having a rich dark appearance with lots of original and some added light finish along with numerous light handling marks from the years. The nose of the comb has some wood loss about 1/2" by 3/8". The iron patchbox and buttplate match the balance of the metal in color and condition. The rifle is sighted with a factory dovetail mounted blade front and folding rear with sliding sighting groove. There are with-the-grain very tight and sound cracks at either side of the top tang running into the meat of the stock and another at the rear of the lockplate - they barely warrant mention and could probably be made to disappear by a competent wood man. This is a nice honest example of these fine Hartford Sharps rifles, one of only about 600 made in this caliber. Interestingly the consignor's notes state that he purchased this rifle from Norm Flayderman in Greenwich, CT on January 13, 1962 for
serial #8070, about .37 caliber or 90 bore, 26" octagon barrel with a very good bore that shows strong deep rifling. This rifle features factory adjustable double set tri...moreggers along with a factory triggerplate mounted sling staple and ring. The rifle features matching number "8070" on the frame, barrel, inside of patchbox door, breechblock, inside heel of butt and in pencil on the endgrain of the buttstock. The metal surfaces were lightly cleaned long ago and are presently a mostly even gray patina with some scattered light oxidation staining and some very fine pin prick pitting. The top tang has a vacant hole which appears to be original and for a tang sight that is no longer present. The barrel marking is partially visible and the frame marking is mostly visible. The walnut buttstock and pewter tipped forend rate very good having a rich dark appearance with lots of original and some added light finish along with numerous light handling marks from the years. The nose of the comb has some wood loss about 1/2" by 3/8". The iron patchbox and buttplate match the balance of the metal in color and condition. The rifle is sighted with a factory dovetail mounted blade front and folding rear with sliding sighting groove. There are with-the-grain very tight and sound cracks at either side of the top tang running into the meat of the stock and another at the rear of the lockplate - they barely warrant mention and could probably be made to disappear by a competent wood man. This is a nice honest example of these fine Hartford Sharps rifles, one of only about 600 made in this caliber. Interestingly the consignor's notes state that he purchased this rifle from Norm Flayderman in Greenwich, CT on January 13, 1962 for

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Sharps Sporting Rifle

Sharps Sporting Rifle

Lot # 37 (Sale Order: 37 of 1099)      

Low Estimate: 2,500High Estimate: 3,500
serial #C,2011, 45 2 6/10", 30" octagon barrel with a good plus bore that is mostly bright but shows a couple patches of oxidation. This is an interesting rifle built on a Sharps New Model 1863 cartridge converted carbine frame. The barrel is numbered on the underside "2011" and it bears all proper Bridgeport markings including the "Old Reliable" moniker and it is caliber marked on the left flat "45 2 6/10". In addition to being rebarreled by Sharps, it was also fitted with a set of factory adjustable set triggers. The condition is nice with the barrel retaining an even light brown patina with all markings remaining legible. The surfaces of the barrel are very smooth with the exception of a few light dings and bruises, several of which are in the area of the "Old Reliable" marking. The action and lock retain lots of original color case-hardened finish which has faded to a mostly German silver color. The left side of the action shows the very neatly factory filled sling bar hole and the buttstock and the sling bar base remains in the stock, polished smooth and now acting simply as a washer for the rear lockplate screw. The condition of the wood is excellent with some added oil finish present, the forend appears to have been lightly cleaned before the oil was added. The top of the butt at the heel shows inspector's initials "H.H.H." neatly stamped. The rifle is sighted with a German silver Rocky Mountain front and a buckhorn rear with folding leaf and sliding sighting notch. A very neat example of a Sharps sporting rifle built in Bridgeport after 1876 using an earlier Hartford military carbine action. (18397-22) {ANTIQUE}
serial #C,2011, 45 2 6/10", 30" octagon barrel with a good plus bore that is mostly bright but shows a couple patches of oxidation. This is an interesting rifle built on ...morea Sharps New Model 1863 cartridge converted carbine frame. The barrel is numbered on the underside "2011" and it bears all proper Bridgeport markings including the "Old Reliable" moniker and it is caliber marked on the left flat "45 2 6/10". In addition to being rebarreled by Sharps, it was also fitted with a set of factory adjustable set triggers. The condition is nice with the barrel retaining an even light brown patina with all markings remaining legible. The surfaces of the barrel are very smooth with the exception of a few light dings and bruises, several of which are in the area of the "Old Reliable" marking. The action and lock retain lots of original color case-hardened finish which has faded to a mostly German silver color. The left side of the action shows the very neatly factory filled sling bar hole and the buttstock and the sling bar base remains in the stock, polished smooth and now acting simply as a washer for the rear lockplate screw. The condition of the wood is excellent with some added oil finish present, the forend appears to have been lightly cleaned before the oil was added. The top of the butt at the heel shows inspector's initials "H.H.H." neatly stamped. The rifle is sighted with a German silver Rocky Mountain front and a buckhorn rear with folding leaf and sliding sighting notch. A very neat example of a Sharps sporting rifle built in Bridgeport after 1876 using an earlier Hartford military carbine action. (18397-22) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Percussion Over Under Buck and Ball Gun by L.L. Hepburn of Colton, New York

Percussion Over Under Buck and Ball Gun by L.L. Hepburn of Colton, New York

Lot # 38 (Sale Order: 38 of 1099)      

Low Estimate: 1,200High Estimate: 1,800
Description Update (8/17/17): A few thin cracks upper tang.

.34 caliber rifled barrel over .618 or about 20 bore smoothbore barrel. Both bores rate good showing some light oxidation and pitting and the top of the barrel is marked "L.L. HEPBURN / COLTON. N.Y.". This over and under configuration is one that was favored by Hepburn and the barrels have a hook breech which is taken down with the removal of a single pin which passes laterally through the frame locking the barrel in place. The gun is plain with no engraving and the right hammer looks to be an old and likely period handmade replacement which matches decently and is not immediately noticeable. The gun features German silver furniture including the buttplate, toeplate, patchbox and triggerguard. The barrels have ramrods mounted on either side with one of them having the base of a 44-40 case as its tip. The barrels show a gray brown patina overall with some scattered areas of light pitting and oxidation staining. The ramrods fit into 7" long tubular holders at the breech end of barrels which show some scattered dents and either side of barrel breeches show light vise impressions. The frame and locks are an even gray patina with just a small amount of light pitting and there is an interesting folding tang-mounted peepsight mounted on the top tang. The holes in which the sight mounts are very clean and appear original. Additionally the rifle is sighted with a period flattop rear and a small German silver blade front. The plain walnut buttstock rates very good having been lightly cleaned and with some added oil finish present. All furniture fits nicely and the rifle has an overall pleasing appearance. (18397-32) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 900.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

19th Century Percussion Converted Brass Barreled Blunderbuss

19th Century Percussion Converted Brass Barreled Blunderbuss

Lot # 39 (Sale Order: 39 of 1099)      

Low Estimate: 1,500High Estimate: 2,500
Bore about 1.9" at muzzle, 18" brass barrel with flared muzzle. The top of the barrel is marked "LONDON / WARRANTED" but the barrel shows no British proofs. The lock is convex shaped with a pronounced teat at rear, is 6 3/4" in length and bears a single crown proofmark that appears Continental, possibly Austrian or German. The gun was converted to percussion via the drum and nipple (nipple now broken) with a heavy handmade percussion hammer. The barrel bears a pleasing even mellow patina overall with some dark staining in the area of the drum. The lock is a medium gray/brown patina which is mostly smooth but with a few old light impact marks and scratches. The stock has a brass triggerguard and buttplate, both with long tangs and the lock screws have no sideplate or washers which is interesting. The stock has a checkered wrist and rates near excellent with long repaired cracks along each side of the barrel that could likely be better camouflaged. The stock shows lots of original finish and has nice sharp edges. The forend tip is painted black to make it appear as a higher grade gun with a horn or ebony tip. The gun has an iron ramrod that appears to be period and correct. Overall a very interesting and nice blunderbuss in percussion converted form. (18397-52) {ANTIQUE}
Bore about 1.9" at muzzle, 18" brass barrel with flared muzzle. The top of the barrel is marked "LONDON / WARRANTED" but the barrel shows no British proofs. The lock is c...moreonvex shaped with a pronounced teat at rear, is 6 3/4" in length and bears a single crown proofmark that appears Continental, possibly Austrian or German. The gun was converted to percussion via the drum and nipple (nipple now broken) with a heavy handmade percussion hammer. The barrel bears a pleasing even mellow patina overall with some dark staining in the area of the drum. The lock is a medium gray/brown patina which is mostly smooth but with a few old light impact marks and scratches. The stock has a brass triggerguard and buttplate, both with long tangs and the lock screws have no sideplate or washers which is interesting. The stock has a checkered wrist and rates near excellent with long repaired cracks along each side of the barrel that could likely be better camouflaged. The stock shows lots of original finish and has nice sharp edges. The forend tip is painted black to make it appear as a higher grade gun with a horn or ebony tip. The gun has an iron ramrod that appears to be period and correct. Overall a very interesting and nice blunderbuss in percussion converted form. (18397-52) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare Early Swiss Model 1900 Luger Pistol by DWM

Rare Early Swiss Model 1900 Luger Pistol by DWM

Lot # 40 (Sale Order: 40 of 1099)      

Low Estimate: 4,000High Estimate: 6,000
serial #79, 30 Luger, 4 3/4" "pencil" barrel with a bright about excellent bore. The metal surfaces retain perhaps 97% original blue, the loss due to fading on the triggerguard, wear on the bottom of the frontstrap and light operational wear on the receiver. The straw parts retain a strong straw temper, including the extractor and toggle lock, with the takedown lever and trigger showing minor pinprick pitting and fading on the front edges. There is still vibrant pale fire temper blue remaining on the breech block pin, coupling link pin, rear connecting pin and sear bar spring. The toggle is marked DWM, the chamber is marked with a Swiss Cross Sunburst and all of the visible numbered parts are matching with the exception of the un-grooved firing pin which is not numbered. The checkered walnut grips rate excellent with one spot of flattening on each panel and they are stamp-numbered to the gun on their interior. Included is a single bright-bodied magazine, with a correctly un-marked wooden base and metallic inserts in the machined finger grasps, which rates about excellent overall with minor operational wear. Included with this early model Luger is a tan leather holster marked "L.G. Walther/Sattler Bern 06" on the back with a "Swiss cross" proof stamp inside the flap. This holster rates about excellent with only minor scrapes, scuffs and handling marks and minor wear where the flap and closure strap contact the body of the holster and minor spots of verdigris where the metal parts meet the leather. The closure strap is intact, the seam stitching remains intact around its periphery, the D-rings are present and intact on both sides and the accompanying leather shoulder strap is also included with buckle, keeper and metal clips intact as well. Included with this holster is a second bright-bodied magazine, with a correctly un-marked wooden base and metallic inserts in the machined finger grasps. which rates about excellent overall with perhaps minor operational wear. Overall an excellent opportunity to own a rare early model Swiss Luger with a double digit serial number and accompanying holster rig. (218400-4) {C&R}
serial #79, 30 Luger, 4 3/4" "pencil" barrel with a bright about excellent bore. The metal surfaces retain perhaps 97% original blue, the loss due to fading on the trigge...morerguard, wear on the bottom of the frontstrap and light operational wear on the receiver. The straw parts retain a strong straw temper, including the extractor and toggle lock, with the takedown lever and trigger showing minor pinprick pitting and fading on the front edges. There is still vibrant pale fire temper blue remaining on the breech block pin, coupling link pin, rear connecting pin and sear bar spring. The toggle is marked DWM, the chamber is marked with a Swiss Cross Sunburst and all of the visible numbered parts are matching with the exception of the un-grooved firing pin which is not numbered. The checkered walnut grips rate excellent with one spot of flattening on each panel and they are stamp-numbered to the gun on their interior. Included is a single bright-bodied magazine, with a correctly un-marked wooden base and metallic inserts in the machined finger grasps, which rates about excellent overall with minor operational wear. Included with this early model Luger is a tan leather holster marked "L.G. Walther/Sattler Bern 06" on the back with a "Swiss cross" proof stamp inside the flap. This holster rates about excellent with only minor scrapes, scuffs and handling marks and minor wear where the flap and closure strap contact the body of the holster and minor spots of verdigris where the metal parts meet the leather. The closure strap is intact, the seam stitching remains intact around its periphery, the D-rings are present and intact on both sides and the accompanying leather shoulder strap is also included with buckle, keeper and metal clips intact as well. Included with this holster is a second bright-bodied magazine, with a correctly un-marked wooden base and metallic inserts in the machined finger grasps. which rates about excellent overall with perhaps minor operational wear. Overall an excellent opportunity to own a rare early model Swiss Luger with a double digit serial number and accompanying holster rig. (218400-4) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Swiss Model 1906 Military Luger Pistol by DWM

Swiss Model 1906 Military Luger Pistol by DWM

Lot # 41 (Sale Order: 41 of 1099)      

Low Estimate: 2,500High Estimate: 3,500
serial #9116, 30 Luger, 4 3/4" "pencil" barrel with a bright about excellent bore showing minor spots of pitting along its length. The metal surfaces retain about 95-97% original blue, the loss due to wear on the bottom of the frontstrap, muzzle, sideplate and both frame rail fronts. The straw parts retain a strong straw temper with minor fading on the front sides of the trigger and takedown lever and the safety lever is toning to pewter; the right side parts are displaying the strongest remaining hue. There is also vibrant pale fire temper blue remaining on the magazine release spring, sear spring, breech block pin and rear connecting pin. The toggle is marked DWM, the chamber is marked with a Swiss Cross Shield and all of the visible numbered parts are matching with the exception of the un-grooved firing pin which is not numbered. It is noted that the rear toggle, grips and barrel lug are marked "116" and the grip safety, trigger and breech block are marked "16". The checkered walnut grips rate excellent and they are stamp-numbered "116" on their interior as previously noted. Included is a single bright-bodied, wood-based magazine which is correctly un-marked which rates about excellent overall with only minor pinprick pitting and oxidation staining. Included with this pistol is a brown leather holster marked "L. Blaser/Sattler 06" on the back with a "(Swiss cross)/N" and a "j.St." stamped inside the flap. This holster rates about excellent overall with very minor handling marks and small specs of verdigris on the metal parts, the closure strap is intact, the seam stitching remains intact around its periphery, the D-rings are present and intact on both sides and the accompanying leather shoulder strap is also included with buckle, keeper and metal clips intact as well. Overall an excellent Swiss Military Luger with holster rig. (218400-5) {C&R}
serial #9116, 30 Luger, 4 3/4" "pencil" barrel with a bright about excellent bore showing minor spots of pitting along its length. The metal surfaces retain about 95-97% ...moreoriginal blue, the loss due to wear on the bottom of the frontstrap, muzzle, sideplate and both frame rail fronts. The straw parts retain a strong straw temper with minor fading on the front sides of the trigger and takedown lever and the safety lever is toning to pewter; the right side parts are displaying the strongest remaining hue. There is also vibrant pale fire temper blue remaining on the magazine release spring, sear spring, breech block pin and rear connecting pin. The toggle is marked DWM, the chamber is marked with a Swiss Cross Shield and all of the visible numbered parts are matching with the exception of the un-grooved firing pin which is not numbered. It is noted that the rear toggle, grips and barrel lug are marked "116" and the grip safety, trigger and breech block are marked "16". The checkered walnut grips rate excellent and they are stamp-numbered "116" on their interior as previously noted. Included is a single bright-bodied, wood-based magazine which is correctly un-marked which rates about excellent overall with only minor pinprick pitting and oxidation staining. Included with this pistol is a brown leather holster marked "L. Blaser/Sattler 06" on the back with a "(Swiss cross)/N" and a "j.St." stamped inside the flap. This holster rates about excellent overall with very minor handling marks and small specs of verdigris on the metal parts, the closure strap is intact, the seam stitching remains intact around its periphery, the D-rings are present and intact on both sides and the accompanying leather shoulder strap is also included with buckle, keeper and metal clips intact as well. Overall an excellent Swiss Military Luger with holster rig. (218400-5) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Extremely Rare Swiss Commercial Model Mauser Banner Luger Pistol

Extremely Rare Swiss Commercial Model Mauser Banner Luger Pistol

Lot # 42 (Sale Order: 42 of 1099)      

Low Estimate: 5,000High Estimate: 7,000
serial #3721v, 7.65mm, 4 3/4" "pencil" barrel with a bright about excellent bore showing minor frosting in the grooves. The metal surfaces retain perhaps 99% original blue and the straw parts are showing a strong straw temper with only minor fading on the front sides of the trigger. There is also vibrant pale fire temper blue remaining on the magazine release spring, sear spring, breech block pin, rear connecting pin and grip screws. The toggle is marked with a 5-line Mauser banner, the chamber is marked with a Swiss Cross Sunburst and all of the visible numbered parts are matching including the grooved firing pin. There is an "(eagle)/N" proof mark on the left receiver, breech block and the front sight face. The checkered walnut grips rate excellent and they are correctly un-marked on their interior. Included is a single bright-bodied, aluminum-based magazine which rates about excellent with minor pitting and operational wear in the finish and it is also correctly un-marked. This actual serial number is shown in Table 25.05 in The Mauser Parabellum 1930-1946
serial #3721v, 7.65mm, 4 3/4" "pencil" barrel with a bright about excellent bore showing minor frosting in the grooves. The metal surfaces retain perhaps 99% original blu...moree and the straw parts are showing a strong straw temper with only minor fading on the front sides of the trigger. There is also vibrant pale fire temper blue remaining on the magazine release spring, sear spring, breech block pin, rear connecting pin and grip screws. The toggle is marked with a 5-line Mauser banner, the chamber is marked with a Swiss Cross Sunburst and all of the visible numbered parts are matching including the grooved firing pin. There is an "(eagle)/N" proof mark on the left receiver, breech block and the front sight face. The checkered walnut grips rate excellent and they are correctly un-marked on their interior. Included is a single bright-bodied, aluminum-based magazine which rates about excellent with minor pitting and operational wear in the finish and it is also correctly un-marked. This actual serial number is shown in Table 25.05 in The Mauser Parabellum 1930-1946

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare Colt Single Action Army Revolver

Rare Colt Single Action Army Revolver

Lot # 43 (Sale Order: 43 of 1099)      

Low Estimate: 2,000High Estimate: 3,000
serial #353837, 38 Colt Special, 5 1/2" barrel with an excellent bore. Only 82 standard frame Colt Single Action Army Revolvers were chambered in 38 Colt Special as it, and its identical twin the 38 S&W Special, did not gain a huge following until after WW II (The 36 Calibers of the Colt by David Brown). The metal surfaces of this 1930 made revolver retain about 70% original factory finishes. The blue on the grip frame is thinning to pewter with brown overtones as well as light to moderate edge wear on the barrel and ejector rod housing. The case-hardened colors on the frame and hammer remain bold overall with the recoil shield and portions of the frame worn to pewter. Additionally, there are light handling marks, limited oxidation stains and minor pinprick pitting. The checkered hard rubber factory grips are numbered 350404 and rate very good plus with light handling marks and scattered dents. The side of the barrel is marked "COLT SINGLE ACTION ARMY 38 SPECIAL" and the "O" in Hartford has a break. There is an "F" in the hammer slot, inspector number "3" over the verified proof, the loading gate is assembly numbered to the frame (which happens to have the same as the last three digits of the serial number) plus the cylinder has a "K" inspectors mark on the front and the last two digits of the serial number on the chamber end. The ball end of the chamber has a square seat which was used in the Colt Special chamber. A rare gun with very strong condition. (88320-5) {C&R}
serial #353837, 38 Colt Special, 5 1/2" barrel with an excellent bore. Only 82 standard frame Colt Single Action Army Revolvers were chambered in 38 Colt Special as it, a...morend its identical twin the 38 S&W Special, did not gain a huge following until after WW II (The 36 Calibers of the Colt by David Brown). The metal surfaces of this 1930 made revolver retain about 70% original factory finishes. The blue on the grip frame is thinning to pewter with brown overtones as well as light to moderate edge wear on the barrel and ejector rod housing. The case-hardened colors on the frame and hammer remain bold overall with the recoil shield and portions of the frame worn to pewter. Additionally, there are light handling marks, limited oxidation stains and minor pinprick pitting. The checkered hard rubber factory grips are numbered 350404 and rate very good plus with light handling marks and scattered dents. The side of the barrel is marked "COLT SINGLE ACTION ARMY 38 SPECIAL" and the "O" in Hartford has a break. There is an "F" in the hammer slot, inspector number "3" over the verified proof, the loading gate is assembly numbered to the frame (which happens to have the same as the last three digits of the serial number) plus the cylinder has a "K" inspectors mark on the front and the last two digits of the serial number on the chamber end. The ball end of the chamber has a square seat which was used in the Colt Special chamber. A rare gun with very strong condition. (88320-5) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Single Action Army Revolver

Colt Single Action Army Revolver

Lot # 44 (Sale Order: 44 of 1099)      

Low Estimate: 3,000High Estimate: 4,000
serial #173540, 45 Colt, 7 1/2" barrel with a bright very good plus to near excellent bore which shows only some very sparsely scattered light oxidation or perhaps a very fine pinprick pit here or there. The barrel is a deep gray-brown patina with some generous trace original blue at the root near the frame and protected area of the ejector rod housing. There are some areas of light pitting on the barrel, closer to the muzzle, ahead of the ejector rod housing and on the front of the ejector rod housing itself. The cylinder retains perhaps 30% original blue, the balance fading to a deep gray-blue patina, with scattered light surface oxidation, most prominent within the flutes. The frame is primarily a mottled smoky gray case-hardened patina with some light smatterings of oxidation here and there but strong trace colors in the pinched section of the frame and to the right of the hammer. There are some sparsely scattered light pinprick pits, but all of the markings remain legible. The triggerguard shows some trace blue at its root, it and the straps have toned primarily to a dull gray and brown patina with some sparse very light pinprick pitting, most prominent on the bow of the guard. The checkered hard rubber Rampant Colt grips rate about very good, their points worn fairly smooth, they are un-numbered however their fit is excellent. The frame, triggerguard and backstrap are all numbered alike and the gun seems to time and lockup well. Overall a very good to Single Action Army in the quintessential configuration with an uncharacteristically nice bore for its age. Manufactured 1897 (38346-2) {ANTIQUE}[Richard Grundhofer Collection]
serial #173540, 45 Colt, 7 1/2" barrel with a bright very good plus to near excellent bore which shows only some very sparsely scattered light oxidation or perhaps a very...more fine pinprick pit here or there. The barrel is a deep gray-brown patina with some generous trace original blue at the root near the frame and protected area of the ejector rod housing. There are some areas of light pitting on the barrel, closer to the muzzle, ahead of the ejector rod housing and on the front of the ejector rod housing itself. The cylinder retains perhaps 30% original blue, the balance fading to a deep gray-blue patina, with scattered light surface oxidation, most prominent within the flutes. The frame is primarily a mottled smoky gray case-hardened patina with some light smatterings of oxidation here and there but strong trace colors in the pinched section of the frame and to the right of the hammer. There are some sparsely scattered light pinprick pits, but all of the markings remain legible. The triggerguard shows some trace blue at its root, it and the straps have toned primarily to a dull gray and brown patina with some sparse very light pinprick pitting, most prominent on the bow of the guard. The checkered hard rubber Rampant Colt grips rate about very good, their points worn fairly smooth, they are un-numbered however their fit is excellent. The frame, triggerguard and backstrap are all numbered alike and the gun seems to time and lockup well. Overall a very good to Single Action Army in the quintessential configuration with an uncharacteristically nice bore for its age. Manufactured 1897 (38346-2) {ANTIQUE}[Richard Grundhofer Collection]

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt U.S. Model 1873 Single Action Army Revolver

Colt U.S. Model 1873 Single Action Army Revolver

Lot # 45 (Sale Order: 45 of 1099)      

Low Estimate: 6,000High Estimate: 8,000
serial #113074, 45 Colt, 7 1/2" barrel with an about very good bore which shows strong rifling but with scattered pitting its full-length, a few spots near the muzzle which may be slightly more moderate. The metal surfaces are an overall dull pewter gray patina, the right side at the muzzle being more of a silvery-pewter in tone. There is some scattered light pinprick and salt and pepper pitting but the markings are all completely legible, the barrel address being only very slightly light. The metal is smooth for the most part with the frame exhibiting some silvery flaking case-hardening with remnants of pale blue on the trigger and a smoky mottled case-hardening on the hammer. The numbers are matching on frame, barrel, triggerguard, backstrap and cylinder. The smooth walnut one piece grip rates very good plus as lightly cleaned many years ago, showing re-acquired dings and chips along the sharp edge right side of butt. The grip number is no longer discernible however there is a light 1884-dated left-side Frank Heath cartouche; the grip still fitting very nicely. The revolver exhibits David Clark's inspectors markings along with a very good left-side "U.S." property marking and numerous sub inspector "G" stampings. The head of the cylinder base pin is somewhat scarred up and the ejector rod head is slightly bent but the gun times well mechanically and lockup is good. (38346-5) {ANTIQUE}
serial #113074, 45 Colt, 7 1/2" barrel with an about very good bore which shows strong rifling but with scattered pitting its full-length, a few spots near the muzzle whi...morech may be slightly more moderate. The metal surfaces are an overall dull pewter gray patina, the right side at the muzzle being more of a silvery-pewter in tone. There is some scattered light pinprick and salt and pepper pitting but the markings are all completely legible, the barrel address being only very slightly light. The metal is smooth for the most part with the frame exhibiting some silvery flaking case-hardening with remnants of pale blue on the trigger and a smoky mottled case-hardening on the hammer. The numbers are matching on frame, barrel, triggerguard, backstrap and cylinder. The smooth walnut one piece grip rates very good plus as lightly cleaned many years ago, showing re-acquired dings and chips along the sharp edge right side of butt. The grip number is no longer discernible however there is a light 1884-dated left-side Frank Heath cartouche; the grip still fitting very nicely. The revolver exhibits David Clark's inspectors markings along with a very good left-side "U.S." property marking and numerous sub inspector "G" stampings. The head of the cylinder base pin is somewhat scarred up and the ejector rod head is slightly bent but the gun times well mechanically and lockup is good. (38346-5) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Model 1922 M1 Bolt Action Rifle by Springfield Armory

U.S. Model 1922 M1 Bolt Action Rifle by Springfield Armory

Lot # 46 (Sale Order: 46 of 1099)      

Low Estimate: 1,200High Estimate: 1,800
serial #20831, 22 LR, 25" 11-31 dated Springfield barrel with a bright excellent bore. The metal surfaces retain 93% arsenal blue finish with some tiny light oxidation spots on floorplate, a couple tiny spots of freckling on barrel, some silvering on the exposed edges, scattered light fading along the barreled action, band and front sight. The nickel steel bolt body is D.C. electric pencil numbered matching and it remains mostly bright with a tiny spot of light pitting on bolt handle, operational wear, light oxidation and freckling. The pistolgrip walnut stock rates excellent retaining much of its armory oil finish with a few light dings and handling marks. There is a scope block on the receiver, another scope block on the barrel, the rifle is sighted with a Lyman peep sight and a 1903 style front blade sight. This rifle is listed in the Springfield Research Service Summary of D.C.M Rifle Sales 1922-1942 as being sold as an M1 NRA model, but it has many features of the M2 Model, so it was updated at some point to M2 standards. A very fine and desirable rifle for the military or rimfire collector. (208397-5) {C&R}
serial #20831, 22 LR, 25" 11-31 dated Springfield barrel with a bright excellent bore. The metal surfaces retain 93% arsenal blue finish with some tiny light oxidation sp...moreots on floorplate, a couple tiny spots of freckling on barrel, some silvering on the exposed edges, scattered light fading along the barreled action, band and front sight. The nickel steel bolt body is D.C. electric pencil numbered matching and it remains mostly bright with a tiny spot of light pitting on bolt handle, operational wear, light oxidation and freckling. The pistolgrip walnut stock rates excellent retaining much of its armory oil finish with a few light dings and handling marks. There is a scope block on the receiver, another scope block on the barrel, the rifle is sighted with a Lyman peep sight and a 1903 style front blade sight. This rifle is listed in the Springfield Research Service Summary of D.C.M Rifle Sales 1922-1942 as being sold as an M1 NRA model, but it has many features of the M2 Model, so it was updated at some point to M2 standards. A very fine and desirable rifle for the military or rimfire collector. (208397-5) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. M1C Garand Sniper Rifle by Springfield Armory

U.S. M1C Garand Sniper Rifle by Springfield Armory

Lot # 47 (Sale Order: 47 of 1099)      

Low Estimate: 2,000High Estimate: 3,000
serial #3790195, 30-06, 24" 6-46 dated Springfield barrel with a very good plus bore that shows some light frosting in the grooves. The metal surfaces retain 70% arsenal parkerized finish with scattered fading, some light silvering near barrel and few spots of oxidation staining. The walnut stock rates very good plus with an added oil finish, three relieved areas around the receiver, three added finger cuts on the left side of pistolgrip, a thumb cut on the right side of comb, scattered dings and handling marks. The parts are mostly of Springfield Armory manufacture, the rear sight aperture is a hooded National Match style and its adjustments appear to be frozen. The gun falls within the M1C serial number range, a matching base that is numbered on the right side is present but there are no other accessories included. A very good example of an M1C sniper that will be a great candidate for restoration. (208388-12) {C&R}
serial #3790195, 30-06, 24" 6-46 dated Springfield barrel with a very good plus bore that shows some light frosting in the grooves. The metal surfaces retain 70% arsenal ...moreparkerized finish with scattered fading, some light silvering near barrel and few spots of oxidation staining. The walnut stock rates very good plus with an added oil finish, three relieved areas around the receiver, three added finger cuts on the left side of pistolgrip, a thumb cut on the right side of comb, scattered dings and handling marks. The parts are mostly of Springfield Armory manufacture, the rear sight aperture is a hooded National Match style and its adjustments appear to be frozen. The gun falls within the M1C serial number range, a matching base that is numbered on the right side is present but there are no other accessories included. A very good example of an M1C sniper that will be a great candidate for restoration. (208388-12) {C&R}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Model 1892 Krag Bolt Action Rifle by Springfield Armory

U.S. Model 1892 Krag Bolt Action Rifle by Springfield Armory

Lot # 48 (Sale Order: 48 of 1099)      

Low Estimate: 1,000High Estimate: 1,500
serial #9295, 30-40 Krag, 30" barrel with an about very good bore that shows scattered light pitting and frosting but strong rifling. The receiver, bands, magazine box, bolt and triggerguard are a silver pewter appearing lightly cleaned with some scattered oxidation staining and light-to-moderate pitting. The barrel retains perhaps 30% original blue with the balance having turned a dull brown patina with scattered oxidation staining. The walnut stock rates very good with an added varnish, a 1/2" crack on the left side of butt, a strong circled "P" firing proof, a partially faded 1895 inspector's cartouche, scattered dings, scratches and handling marks. The rifle has a correct flat crown, an 1896 rear sight, a correct buttplate that lacks a trapdoor and a correct steel cleaning rod. A good overall example of a hard-to-find non-updated 1892 Krag rifle. (208397-48) {ANTIQUE}
serial #9295, 30-40 Krag, 30" barrel with an about very good bore that shows scattered light pitting and frosting but strong rifling. The receiver, bands, magazine box, b...moreolt and triggerguard are a silver pewter appearing lightly cleaned with some scattered oxidation staining and light-to-moderate pitting. The barrel retains perhaps 30% original blue with the balance having turned a dull brown patina with scattered oxidation staining. The walnut stock rates very good with an added varnish, a 1/2" crack on the left side of butt, a strong circled "P" firing proof, a partially faded 1895 inspector's cartouche, scattered dings, scratches and handling marks. The rifle has a correct flat crown, an 1896 rear sight, a correct buttplate that lacks a trapdoor and a correct steel cleaning rod. A good overall example of a hard-to-find non-updated 1892 Krag rifle. (208397-48) {ANTIQUE}

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Winchester Model 1895 Lee Navy Bolt Action Rifle

Winchester Model 1895 Lee Navy Bolt Action Rifle

Lot # 49 (Sale Order: 49 of 1099)      

Low Estimate: 1,500High Estimate: 2,000
serial #199, 6mm Lee Navy, 28" barrel with a good bore that shows frosting throughout, scattered pitting but evident rifling. The metal surfaces are mostly a dull gray patina with the top of bolt and bolt handle retaining much of a fire blue finish, freckling on bolt and scattered oxidation staining. The walnut stock rates very good as-refinished with an added varnish, an expertly repaired 3" crack behind the receiver, a small chip on the left front of handguard, scattered dings and handling marks. The receiver is marked with an "N.C.T." inspector's marking indicating that it was one of the first contract for rifles; the bolt release and safety may be replacements from a later Lee Navy rifle. A very good example of these hard-to-find early Navy rifles. (206520-2349) {ANTIQUE}[Richard "Stretch" Kennedy Collection]
serial #199, 6mm Lee Navy, 28" barrel with a good bore that shows frosting throughout, scattered pitting but evident rifling. The metal surfaces are mostly a dull gray pa...moretina with the top of bolt and bolt handle retaining much of a fire blue finish, freckling on bolt and scattered oxidation staining. The walnut stock rates very good as-refinished with an added varnish, an expertly repaired 3" crack behind the receiver, a small chip on the left front of handguard, scattered dings and handling marks. The receiver is marked with an "N.C.T." inspector's marking indicating that it was one of the first contract for rifles; the bolt release and safety may be replacements from a later Lee Navy rifle. A very good example of these hard-to-find early Navy rifles. (206520-2349) {ANTIQUE}[Richard "Stretch" Kennedy Collection]

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,900.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Extremely Rare Original Case V-42 Commando Stiletto Belonging To Staff Sgt. Charles J. Stressler

Extremely Rare Original Case V-42 Commando Stiletto Belonging To Staff Sgt. Charles J. Stressler

Lot # 50 (Sale Order: 50 of 1099)      

Low Estimate: 7,000High Estimate: 9,000
Manufactured by the Case Knife Co. in 1942, 3600 knives were made, about 70 with short scabbards to the U.S.N. with the remainder going to the First Special Force, which because of its acuities was connected to the O.S.S. When the O.S.S. was disbanded the knives were put in a storage facility until the creation of the C.I.A. and when the Special Forces was formed as part of it on June 20th., 1952, those surplus knives were issued only to Special Forces Members. Charles Stressler was issued one of those knives and was quoted as saying "I had no idea what it was or its history. The thing I vividly did remember was the long sheath, everyone joked how we looked like gunslingers. At the time of issue, we were told if one of these knives were "misplaced" there would be an investigation, just as if you lost a Colt .45. The skull crusher, the shape of the blade made it deadly for someone on the receiving end. It was impressive, I for one know (I used mine) it saved my life on more than ONE occurrence and of the 23 other G.I.'s". The knife measurers 12 1/2" from the tip of the blade to the skull crusher pommel with a 7 1/2" double edged blade having a diamond shaped grind and a 1 1/2" ricasso with grooved thumb print above "CASE" on the reverse side. The condition of the knife is fine with finish wear expected with years of combat service, the tip sharp and minor abrasions along the edges that can be felt but not seen. The iron surfaces retain about 90% original blue, loss due to light edge wear and pewter toning on the thumb print and mainly the first 2 1/2" of the tip. The oval aluminum guard remains bright and the leather backing fully intact. The stacked thin leather washer handle is in similar condition with very minor carry wear present. The russet leather scabbard rates excellent measuring 19 1/4" long and has a riveted belt loop and a lozenge shaped stapled handle strap. There are eight steel staples in the throat, seven lozenge-shaped, staples on either side of the stitched seams and a brass lanyard ring at the tip. The leather showing only minor staining and handling wear. Charles J. Stressler (Staff Sgt. E-6) was a member of 77th. Spec. Fcs. GP. in 1954 and awarded the SR. Parachutist Badge for over 40 jumps, Combat Action Badge for Black Ops missions 1954-1955 in Cuba, Special Ops diver-scuba and demolitions 2nd. Recon Co. U.S.M.C. and unknown service medals because all his records are sealed. SSG. Stressler (June 20, 1936-June 19, 2017) lived 81 years and left us one day before his birthday and ironically enough the day before the anniversary of the Special Forces formation. Included with the knife is a modern W.R. Case magnetic walnut display case with etched glass lid, and a signed notarized statement from the consignor, detailing his relationship with Sgt. Stressler and his acquisition of the knife; a photo of the Staff Sgt. in jump gear is included as well. A fabulous V-42 stiletto carried by one of our elite fighting men who protected his knife like it protected him. (58368-13)
Manufactured by the Case Knife Co. in 1942, 3600 knives were made, about 70 with short scabbards to the U.S.N. with the remainder going to the First Special Force, which ...morebecause of its acuities was connected to the O.S.S. When the O.S.S. was disbanded the knives were put in a storage facility until the creation of the C.I.A. and when the Special Forces was formed as part of it on June 20th., 1952, those surplus knives were issued only to Special Forces Members. Charles Stressler was issued one of those knives and was quoted as saying "I had no idea what it was or its history. The thing I vividly did remember was the long sheath, everyone joked how we looked like gunslingers. At the time of issue, we were told if one of these knives were "misplaced" there would be an investigation, just as if you lost a Colt .45. The skull crusher, the shape of the blade made it deadly for someone on the receiving end. It was impressive, I for one know (I used mine) it saved my life on more than ONE occurrence and of the 23 other G.I.'s". The knife measurers 12 1/2" from the tip of the blade to the skull crusher pommel with a 7 1/2" double edged blade having a diamond shaped grind and a 1 1/2" ricasso with grooved thumb print above "CASE" on the reverse side. The condition of the knife is fine with finish wear expected with years of combat service, the tip sharp and minor abrasions along the edges that can be felt but not seen. The iron surfaces retain about 90% original blue, loss due to light edge wear and pewter toning on the thumb print and mainly the first 2 1/2" of the tip. The oval aluminum guard remains bright and the leather backing fully intact. The stacked thin leather washer handle is in similar condition with very minor carry wear present. The russet leather scabbard rates excellent measuring 19 1/4" long and has a riveted belt loop and a lozenge shaped stapled handle strap. There are eight steel staples in the throat, seven lozenge-shaped, staples on either side of the stitched seams and a brass lanyard ring at the tip. The leather showing only minor staining and handling wear. Charles J. Stressler (Staff Sgt. E-6) was a member of 77th. Spec. Fcs. GP. in 1954 and awarded the SR. Parachutist Badge for over 40 jumps, Combat Action Badge for Black Ops missions 1954-1955 in Cuba, Special Ops diver-scuba and demolitions 2nd. Recon Co. U.S.M.C. and unknown service medals because all his records are sealed. SSG. Stressler (June 20, 1936-June 19, 2017) lived 81 years and left us one day before his birthday and ironically enough the day before the anniversary of the Special Forces formation. Included with the knife is a modern W.R. Case magnetic walnut display case with etched glass lid, and a signed notarized statement from the consignor, detailing his relationship with Sgt. Stressler and his acquisition of the knife; a photo of the Staff Sgt. in jump gear is included as well. A fabulous V-42 stiletto carried by one of our elite fighting men who protected his knife like it protected him. (58368-13)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Search
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 44

1.178.0.761.2502f97.13.118