(2) G&E CNC Gashers

(2) G&E CNC Gashers

Auction closed.
Auction closed.
(2) G&E CNC Gashers

(2) G&E CNC Gashers

Auction closed.
Auction closed.
Internet Premium: 15%
Instant Financing | Low PaymentsSee Special Terms for additional fees

10 Minute Extended Bidding

Share:

Description

G&E Model 120GH New CNC Gear Gasher & G&E Model 96H Remanufactured CNC Gear Gasher
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 1

Closed Lots

G&E Model 120GH New CNC Gear Gasher

Lot # 1      

Equipment: New Gear Hobbers & Reman Model: 120GH Description: G&E Model 120GH New CNC Gear Gasher, Max Dia. 145'', Max Face 55'', 1 DP, New, Reference #: 2376 The G&E...more Gasher 120GH is a rigid single column machine that can be equipped with internal or external gashing head. This machine is designed to finish or rough cut internal/external spur gears using single index milling method with carbide tip milling cutters. Work Ranges External Gears: Max. gear diameter 145'' Min. gear diameter gashing 40'' w/8'' cutter Min. gear diameter hobbing 20'' w/8'' cutter Max. face width 55'' Work Ranges Internal Gears: Max. internal gear diameter 145'' Min. gear inside diameter 40'' Machine Specifications: Diameter of work table 102'' Bore diameter of work table 29'' Max. load on table 50 tons Pitch diameter of index gear 96'' Index range, number of teeth Infinitely Variable Power requirements 480V, 3Ph, 60 Hz and/or 380V, 3Ph, 50H, 250 AMPS Pneumatic requirements 80 CFM at 90 PSI Machine height 5.3 meters Weight of machine, Approx 35 metric tons Floor space required 9.1 m by 5.4 m approx. G&E CNC 120GH Gasher with standard equipment package * Single stanchion machine assembly * Fanuc 18i Model B pendant control with gear cutting software * Oil recirculation system with filtration for cutting head * Hydraulic table braking system * Oil chilling system * Gashing arbor. * Set of leveling blocks. * 2 Sets of operator and maintenance manuals. Control Features: * C-Axis work table rotation * X-Axis radial infeed * Z-Axis axial feed * Fanuc Spindle motor for cutter rotation * Custom Macro screens for easy conversational programming * One to three cuts can be selected * Crowning amounts are input by the desired amount on the flank of the gear * Single index milling * Control of separate entering and exiting feed rates to optimize cycle times and cutting loads * Programmable taper * Sizing cycle feature used to make corrections to the size of a part without running through a complete multi cut cycle * Part programs can be stored in nonvolatile memory with up to 15 characters * RS-232, S Ram, and Ethernet communication ports. (S Ram card included) (4.1) G&E Standard External Gashing Head: The cutter is driven by a Fanuc 40 KW spindle motor directly coupled to a double enveloping worm and worm gear cone drive, cased in a re circulating oil bath. The oil bath recirculation system is a free standing above floor system servicing only the cutter heads. The re-circulation system includes filtration and oil temperature control for consistent predictable performance and long life of the cutter head gear drives. Max. gear diameter 150'' Max. tooth form gashing 1 dp/25 mod Tangential path or shift 0 Max. cutter diameter 18'' Max. cutter width 5'' Spindle RPM 0-125 RPM Power of main drive 40 KW OR (5.2) G&E Standard Internal Gashing Head: The cutter is driven by a Fanuc 40 KW spindle motor directly coupled to a double enveloping worm and worm gear cone drive, cased in a re circulating oil bath. The oil bath recirculation system is a free standing above floor system servicing only the cutter heads. The re-circulation system includes filtration and oil temperature control for consistent predictable performance and long life of the cutter head gear drives. Min. gear internal diameter 32'' Max. tooth form 1.5 dp/17 mod Max. face width 14.2'' Max. throat distance 17'' Spindle speeds 0 to 125 RPM Max. cutter diameter x width 16'' x 90mm Power of main drive 40 KW

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

G&E Model 96H Remanufactured CNC Gear Gasher

Lot # 2      

Equipment: New Gear Hobbers & Reman Model: 96H Description: G&E Model 96H Remanufactured CNC Gear Gasher, 100'' Dia, 32'' Face, 1 DP Reference #: 2468 The G&E Hobber/...moreGasher 96-H is remanufactured to be a rigid single column machine that can be equipped with internal or external gashing heads. This machine is designed to finish or rough cut internal/external spur gears by single index milling method. Work Ranges External Gears: Max. gear diameter 100'' Min. gear diameter 10'' Max. face width 32'' Max. swivel +/- 45 Deg. Max. shift or tangential slide 0 Machine Specifications: Diameter of work table 78'' Bore diameter of work table 25.9'' Max. load on table 35 t Pitch diameter of index gear 70'' Index range, number of teeth Infinitely Variable Power requirements 480V, 3Ph, 60 Hz and/or 380V, 3Ph, 50H, 250 AMPS Pneumatic requirements 80 CFM at 90 PSI Machine height 208'' Weight of machine, Approx 35 tons Floor space required 358'' by 212'' approx. * Single stanchion machine assembly with 4.2 external cutting head or internal head Control Features: * C-Axis work table rotation * X-Axis radial infeed * Z-Axis axial feed * B-Axis cutter rotation * Custom Macro screens for easy conversational programming * One to three possible cutting cycles * Single Index Cutting * Programmable taper * Part programs can be stored in nonvolatile memory with up to 15 characters * RS-232, S Ram, and Ethernet communication ports. (S Ram card included) Standard Gashing Head Included: (4.1) G&E Standard External Gashing Head: The cutter is driven by a Fanuc 40 KW spindle motor directly coupled to a double enveloping worm and worm gear cone drive, cased in a re circulating oil bath. The oil bath recirculation system is a free standing above floor system servicing only the cutter heads. The re-circulation system includes filtration and oil temperature control for consistent predictable performance and long life of the cutter head gear drives. Max. gear diameter 145'' Max. tooth form gashing 1 dp/25 mod Tangential path or shift 0 Max. cutter diameter 18'' Max. cutter width 5'' Spindle RPM 0-125 RPM Power of main drive 40 KW (5.2) G&E Standard Internal Gashing Head: The cutter is driven by a Fanuc 40 KW spindle motor directly coupled to a double enveloping worm and worm gear cone drive, cased in a re circulating oil bath. The oil bath recirculation system is a free standing above floor system servicing only the cutter heads. The re-circulation system includes filtration and oil temperature control for consistent predictable performance and long life of the cutter head gear drives. Min. gear internal diameter 32'' Max. tooth form 1 dp/17 mod Max. face width 14.2'' Max. throat distance 17'' Spindle speeds 0 to 125 RPM Max. cutter diameter x width 16'' x 90mm Power of main drive 40 KW

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 1

1.178.0.754.b409b2a.10.250