Print Show Images  
Proxibid - It''s all in the Marketplace
Commercial & Industrial  >  Quaker City Auctioneers Inc  >  Surplus Machinery of the JADE CO.

Surplus Machinery of the JADE CO.

by Quaker City Auctioneers Inc
Mon, Dec  17, 2007  9:00 AM  - Wed, Dec 19, 2007 3:00 PM  Eastern

Lots 1-52, 91 & 92 in Southampton 53-90 Hunting Valley 93-100 New York

Drexel Sl-33-ess-hp-6 Reconditioned Electric Solid Tire Fork Lift, S/n 15018-10, (1984), 90 Degree S

Lot #1 (Sale Order 1 of 97)

DREXEL SL-33-ESS-HP-6 RECONDITIONED ELECTRIC SOLID TIRE FORK LIFT, S/N 15018-10, (1984), 90 DEGREE SWING, TPL. MAST TO 198", 3000 LB. CAP., 36 VOLT BATTERY W/ CHARGER

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Bliss C35 Inclinable Press, S/n H57945/ Hp45190 (1967), 35 Ton, 2?" Slide Adjmt., 13?" Shut Ht.,

Lot #2 (Sale Order 2 of 97)

BLISS C35 Inclinable Press, S/N H57945/ HP45190 (1967), 35 Ton, 2.5" Slide Adjmt., 13?" Shut Ht., Bolster 26? x 17 (LRFB), Air Clutch & Brake, Dual Palm Controls w/ Press Control, VS Drive

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 3,300.00
You've been outbid  to h****0! to YOU!

Placing your bid. please wait...

Minster #5 Obi Press, Type 101-5 Flywheel, S/n 101-5-21870 (1974), 45-ton, 120 Spm, 4" Stroke, 2

Lot #3 (Sale Order 3 of 97)

MINSTER #5 OBI Press, Type 101-5 Flywheel, S/N 101-5-21870 (1974), 45-Ton, 120 SPM, 4" Stroke, 2?" Slide Adjmt., 12?" Shut Ht., Bolster 28 x 18 (LRFB), Mechanical Clutch, Dual Palm Controls, Auto Stroke Control, LINK-LITE Safety Curtain, PAX Lube System w/ Power Air 6" Press Feeder, S/N F61 235

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 5,500.00
You've been outbid  to S****H! to YOU!

Placing your bid. please wait...

AIDA Model NSU-S2-2000 Unitized Straight Side Press, S/N A7002-1016

Lot #4 (Sale Order 4 of 97)

220 Tons, 7.99" Stroke, 50-100SPM, 22.24" Die Ht., 5.91 Slide Adjmt., 72X42 Bolster, GENESIS PLC Conrol w/ Touch Screen, MERLIN Safety System, PAX Lube System w/ w/ PA Ind. Ultra SRF 20U Servo Roll Feed w/ Control w/ PA Ind. SRA 6524 Stock Reel w/ PA Ind. SS 207D Stock Straightener(installed 2004)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Minster No 8 Obi Press, S/n 8-6538 (1950), 93-ton, 6" Stroke, 3?" Slide Adjmt., 20?" Shut Ht., Bol

Lot #6 (Sale Order 6 of 97)

MINSTER NO 8 OBI Press, S/N 8-6538 (1950), 93-Ton, 6" Stroke, 3.5" Slide Adjmt., 20?" Shut Ht., Bolster 40 x 26 (LRFB), Air Die Cushion, Mechanical Clutch, Dual Palm Buttons, Pull Backs (not in use), ARC-TROI-1 Digital Tool 7 Die Protection System w/ Air Feeder, 8"

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Jaco Jsgcc-10 Coil Cradle & Straightener, S/n 180443, 10" Width, Straightening Rolls, Pinch Feed &

Lot #7 (Sale Order 7 of 97)

JACO JSGCC-10 Coil Cradle & Straightener, S/N 180443, 10" Width, Straightening Rolls, Pinch Feed & Exit Rolls, 3 Straightening

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Danly #75 Obi Press, S/n 75 6066 01 79 (1979), 75 Ton N.G., Air Clutch, 4" Stroke, 3" Slide Adjmt.,

Lot #8 (Sale Order 8 of 97)

DANLY #75 OBI Press, S/N 75 6066 01 79 (1979), 75 Ton N.G., Air Clutch, 4" Stroke, 3" Slide Adjmt., 15.5" Shut Ht., 67-90 SPM, Bolster 35 x 25 (LRFB), Dual palm Controls, ARC-TRO1-1 Digital Tool & Die protection System, Press Control w/ Air Feeder, 10" w/ Pulse Air Ejection Control System

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 5,500.00
You've been outbid  to S****H! to YOU!

Placing your bid. please wait...

Johnson #45 Obi Press, S/n 64094 (1964), (press 45-fw-a.C.), 45 Ton, 3" Stroke, 11-3/4 Shut Ht., 3

Lot #9 (Sale Order 9 of 97)

JOHNSON #45 OBI Press, S/N 64094 (1964), (Press 45-FW-A.C.), 45 Ton, 3" Stroke, 11-3/4 Shut Ht., 3" Slide Adjmt., Bed 28 x 18 (LRFB), 65-195 SPM, Air Clutch

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 1,000.00
You've been outbid  to S****H! to YOU!

Placing your bid. please wait...

Letellier 10,000 Lb. Crane Coil Cradle S/n 67486

Lot #10 (Sale Order 10 of 97)

LETELLIER 10,000 Lb. Crane Coil Cradle S/N 67486

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Ingersoll-rand Ssr Xf 100 Rotary Screw Air Compressor, S/n D3273, 100 Hp, Hr. Meter Rolled Over

Lot #11 (Sale Order 11 of 97)

INGERSOLL-RAND SSR XF 100 Rotary Screw Air Compressor, S/N D3273, 100 HP, Hr. Meter Rolled Over Ð 13,281 Hrs.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Joy Twistair Rotary Screw Air Compressor Mdl. Ta025ti-4, S/n 93076, 25 Hp, 125 Psig,

Lot #12 (Sale Order 12 of 97)

JOY TWISTAIR Rotary Screw Air Compressor Mdl. TA025TI-4, S/N 93076, 25 HP, 125 PSIG,

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Sullair 10b-25 Rotary Screw Air Compressor, S/n 003-56950, 25 Hp, 125 Psig,

Lot #13 (Sale Order 13 of 97)

SULLAIR 10B-25 Rotary Screw Air Compressor, S/N 003-56950, 25 HP, 125 PSIG,

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Deltech Refrigerated Compressed Air Dryer, Mdl. Hg550-e4, S/n 863hg1611 (1986), 150 Psig

Lot #14 (Sale Order 14 of 97)

DELTECH Refrigerated Compressed Air Dryer, Mdl. HG550-E4, S/N 863HG1611 (1986), 150 PSIG

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Efi No 21 Geared Head Drill Press Type Fb3, S/n 6107, 21", 14 X 14 Table

Lot #15 (Sale Order 15 of 97)

EFI NO 21 Geared Head Drill Press Type FB3, S/N 6107, 21", 14 x 14 Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 300.00
You've been outbid  to y****6! to YOU!

Placing your bid. please wait...

Jones & Lamson Tc-10 Optical Comparator & Measuring Machine, S/n E60209 5 X 16 Table

Lot #16 (Sale Order 16 of 97)

JONES & LAMSON TC-10 Optical Comparator & Measuring Machine, S/N E60209 5 X 16 Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

American Steel Line Mdl. 60 Motorized Uncoiler, S/n 1423, 6000 Lb. Cap., 34ó X 48ó, Expanding Arbors

Lot #17 (Sale Order 17 of 97)

AMERICAN STEEL LINE Mdl. 60 Motorized Uncoiler, S/N 1423, 6000 Lb. Cap., 34Ó x 48Ó, Expanding Arbors, Air Clutch & Brake

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 1,750.00
You've been outbid  to h****0! to YOU!

Placing your bid. please wait...

Bruderer Bsta 25 High Speed Punch Press, S/n Ru-1302 (1979), Hi-speed Punch Press, 4-post Adj. S

Lot #18 (Sale Order 18 of 97)

BRUDERER BSTA 25 High Speed Punch Press, S/N RU-1302 (1979), Hi-Speed Punch Press, 4-Post Adj. Stroke .5" - 1.5", 100 - 1500 SPM, 20 x 21 T-Slotted Bed (LRFB), Air Clutch & Brake, 25 HP, Height Adjmt 2", Bed 18.9" X 7.8", w/ BBV/20 Feed Unit & Console Control

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Minster E2-250-84-36 Dbl. Geared Press, S/n E2-250-12901 (1961), 250 Ton, 13-26 Spm, Bolster 84 X 3

Lot #19 (Sale Order 19 of 97)

MINSTER E2-250-84-36 Dbl. Geared Press, S/N E2-250-12901 (1961), 250 Ton, 13-26 SPM, Bolster 84 x 36 (LRFB), 10" Stroke, 6" Slide Adjmt., 31" Shut Ht., Air Clutch w/ SHADOW Infrared Light Safety Curtain (disconnected) w/ ARC-TROI-1 Digital Tool & Die Protection System w/ PULSE-AIR Electronic Air Ejection Control System w/ Operators Control Pendant w/ Link Programmable Limit Switch & Die Protection System Feed Lease Frame w/ DALLAS DWF 325X 24 L.H. Air Feeder, S/N 18801, Cap. Max. .031, 18" Max w/ Feed Stroke Length Adjuster

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Press Room Pr-186000-dc Pneumatic Centering Reel, W/ Paddle Loop Control S/n 0888-040 (1988), W/ Ex

Lot #20 (Sale Order 20 of 97)

PRESS ROOM PR-186000-DC Pneumatic Centering Reel, w/ Paddle Loop Control S/N 0888-040 (1988), w/ Expanding Arbor, Brake, MORSE VS Controller, Max. Width 18", Max. Coil O.D. 60", 6000 Lb.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Press Room Equipment Straightener Feed S/n 0788-028, Mdl. R318-5pr, Mtd. On A2 Stand 5 Straighten

Lot #21 (Sale Order 21 of 97)

Press Room Equipment Straightener Feed S/N 0788-028, Mdl. R318-5PR, Mtd. on A2 Stand 5 Straightening Rolls w/ Pinch Rolls and Feeder, 18Ó

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Bruderer 12 120b Straightener, S/n 30259 (1979), 4.72", 19 Straightening Rolls, .060" Max. Thicknes

Lot #22 (Sale Order 22 of 97)

BRUDERER 12 120B Straightener, S/N 30259 (1979), 4.72", 19 Straightening Rolls, .060" Max. Thickness & LITTELL NO 5 Auto Centering Non-Powered Reel, S/N 8690-81, 600 lb. Cap., 36.46 Max. Dia., 10" Width

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Bruderer Bsta 60hl, High Speed Press, 60-ton, 4-post, S/n L2790 (1973) Air Clutch, 28 X 30 Bed (lrf

Lot #23 (Sale Order 23 of 97)

BRUDERER BSTA 60HL, High Speed Press, 60-Ton, 4-Post, S/N L2790 (1973) Air Clutch, 28 x 30 Bed (LRFB) 150 SPM @ 3" Stroke, 800 SPM @ 3/4" Stroke (70-800 SPM), 36" x 24" Bed w/ BBV 202/120 Roll Feeder, 6" Max Width

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Blow SC2-400-108-54 SS 2-point Crankshaft Press, S/n Sdg-400-439-97, (1997), 400-ton, Bed 108" X 54"

Lot #24 (Sale Order 24 of 97)

BLOW SC2-400-108-54 SS 2-POINT CRANKSHAFT PRESS, S/N SDG-400-439-97, (1997), 400-TON, BED 108" x 54" (LRFB), 10" STROKE, 28" SHUT HEIGHT, 10" SLIDE ADJMT., 20-60 SPM, 60 HP, AIR CLUTCH & BRAKE, OMNILINK LCD OPERATOR PLC, CONTROLLER W/ 6" CRT & ALLEN-BRADLEY CONTROL, LINK-LITE SAFETY CURTAIN, DUAL PUSH BUTTON OPERATER CONTROL, EJECTOMAT PART CONTROL, AUTO, FLEX-RAY LUBE SYSTEM W/ PRE AIR PRESS FEEDER W/ LCD PLC, FEED CONTROLLER MDL. P325F36-A-ECCAB, S/N 0901-019, 36" WIDTH .135 THICKNESS, PINCH ROLLS

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Rowe Motorized Centering Reel Mdl. 7520-dsl, S/n 24159, (1980), Coil Cap. 7500 Lbs., 20" Wide, 60"

Lot #25 (Sale Order 25 of 97)

ROWE Motorized Centering Reel Mdl. 7520-DSL, S/N 24159, (1980), Coil Cap. 7500 LBS., 20" Wide, 60" O.D., Power Brake & Clutch Adjmt., Expanding Arbors

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 3,200.00
You've been outbid  to h****0! to YOU!

Placing your bid. please wait...

F.J. Littell No. 318 Continuous Straightener, S/n 77743-69 (1969), Code 318 9pdl, Cap. .020x18",

Lot #26 (Sale Order 26 of 97)

F.J. LITTELL NO. 318 Continuous Straightener, S/N 77743-69 (1969), Code 318 9PDL, Cap. .020x18", 5" to 30" / Minute, 9 Straightening Rolls

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Msc 12" Bench Drill Press

Lot #27 (Sale Order 27 of 97)

MSC 12" Bench Drill Press

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

2-benchmaster 3bf100 Bench Top Punch Press, S/n 64436, 3-ton

Lot #28 (Sale Order 28 of 97)

2-BENCHMASTER 3BF100 Bench Top Punch Press, S/N 64436, 3-Ton

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 110.00
You've been outbid  to o****s! to YOU!

Placing your bid. please wait...

Dake H-frame Elec-draulic Press, Mdl. 5-075a, S/n 146849, 75 Ton

Lot #29 (Sale Order 29 of 97)

DAKE H-Frame Elec-Draulic Press, Mdl. 5-075A, S/N 146849, 75 Ton

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 1,000.00
You've been outbid  to l****h! to YOU!

Placing your bid. please wait...

Feed Lease Coil Cradle, 7-roll Straightener W/ Overarm Loop,

Lot #30 (Sale Order 30 of 97)

FEED LEASE COIL Cradle, 7-Roll Straightener w/ Overarm Loop,

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Cimaf Efi Geared Head Bench Drill Press, 22" No 57, S/n 7106, Type S/n Fbib Ss 115-3240 W/ Tapmatic

Lot #31 (Sale Order 31 of 97)

CIMAF EFI Geared Head Bench Drill Press, 22" NO 57, S/N 7106, Type S/N FBIB SS 115-3240 w/ Tapmatic Tapping Head, (Mdl. AV1022111V, S/N 67147240

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Yoshida Yr5-115 Radial Arm Drill, S/n 5743002, 12" Col. X 48" Arm, Ss 40-1800 Rpm, 20 X 25 X 18 Box

Lot #32 (Sale Order 32 of 97)

YOSHIDA YR5-115 Radial Arm Drill, S/N 5743002, 12" Col. x 48" Arm, SS 40-1800 RPM, 20 x 25 x 18 Box Table, 42" Slotted Base

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Wellsaw 850 Horizontal Metal Cutting Band Saw, S/n 2382, 9 X 18

Lot #33 (Sale Order 33 of 97)

WELLSAW 850 Horizontal Metal Cutting Band Saw, S/N 2382, 9 x 18

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00
You've been outbid  to o****s! to YOU!

Placing your bid. please wait...

Rockwell 12" Disc Sander, Mdl. 31-426, S/n D77594, 10 X 16 Table

Lot #34 (Sale Order 34 of 97)

ROCKWELL 12" Disc Sander, Mdl. 31-426, S/N D77594, 10 x 16 Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Rockwell 8" De Grinder W/ Pedestal, 23-100 S/n 63923-b

Lot #35 (Sale Order 35 of 97)

ROCKWELL 8" DE Grinder w/ Pedestal, 23-100 S/N 63923-B

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 55.00
You've been outbid  to g****a! to YOU!

Placing your bid. please wait...

Darex Drill Sharpener, S/n 55662, 1/3 Hp

Lot #36 (Sale Order 36 of 97)

DAREX Drill Sharpener, S/N 55662, 1/3 HP

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 250.00
You've been outbid  to y****6! to YOU!

Placing your bid. please wait...

Pexto 137-l Foot Shear, S/n 10/67, 37" W/ Back Gage

Lot #37 (Sale Order 37 of 97)

PEXTO 137-L Foot Shear, S/N 10/67, 37" w/ Back Gage

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Economaster 14" Engine Lathe, S/n 66263, 14" Swing X 40" Cc, Ss 55-1800 Rpm, 8" 3-jaw Chuck, Drehb

Lot #38 (Sale Order 38 of 97)

ECONOMASTER 14" ENGINE Lathe, S/N 66263, 14" Swing x 40" CC, SS 55-1800 RPM, 8" 3-Jaw Chuck, DREHBLITZ Tool Post, Inch/Metric Threading

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Grob 4v-24 Vertical Metal Cutting Band Saw, S/n 1354 (1978), 24" W/ Rwa Blade Welder / Grinder, 28

Lot #39 (Sale Order 39 of 97)

GROB 4V-24 Vertical Metal Cutting Band Saw, S/N 1354 (1978), 24" w/ RWA Blade Welder / Grinder, 28 x 24 Table, Speed 50-500 FPM

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reid Rollerway 618hr Surface Grinder, S/n 19675, (1975), 6" X 18" Walker Permanent Magnetic Chuck,

Lot #40 (Sale Order 40 of 97)

REID Rollerway 618HR Surface Grinder, S/N 19675, (1975), 6" x 18" WALKER Permanent Magnetic Chuck, ACU-RITE II DRO X-Axis, Roller Bearing Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00
You've been outbid  to B****1! to YOU!

Placing your bid. please wait...

Mitsui Msg 200mh Surface Grinder, S/n 79122419 (1979), 6" X 12" Walker Permanent Magnetic Chuck, Acu

Lot #41 (Sale Order 41 of 97)

MITSUI MSG 200MH Surface Grinder, S/N 79122419 (1979), 6" x 12" WALKER Permanent Magnetic Chuck, ACU-RITE II DRO

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reid 618hr Rollerway Surface Grinder, S/n 18716 (1969), W/ 6 X 12 Permanent Magnetic Chuck W/ Acu

Lot #42 (Sale Order 42 of 97)

REID 618HR Rollerway Surface Grinder, S/N 18716 (1969), w/ 6 X 12 Permanent Magnetic Chuck w/ ACU-RITE II DRO X-Axis, Roller Bearing Table (new located in Stamping Machine Shop)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Allen Precision Drill Press, S/n Ma34155, (1972), 30", Direct Back Geared, Ss 150-1800 Rpm, 25

Lot #43 (Sale Order 43 of 97)

ALLEN Precision Drill Press, S/N MA34155, (1972), 30", Direct Back Geared, SS 150-1800 RPM, 25 x 34 Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Bridgeport Series I Vertical Mill, S/n 12br 216215 (1980), 2 Hp, 9" X 42" Pf Table W/ Anilam Dro, I

Lot #44 (Sale Order 44 of 97)

BRIDGEPORT SERIES I Vertical Mill, S/N 12BR 216215 (1980), 2 HP, 9" x 42" PF Table w/ ANILAM DRO, Infinitely Variable SS 60-4200 RPM, TIBON Hardened Ways, Milling Vise

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 2,750.00
You've been outbid  to p****n! to YOU!

Placing your bid. please wait...

Bridgeport Series I Vertical Mill, S/n 12br 119218 (1968), 1? Hp, 9" X 42" Pf Table W/ Acu-rite Dr

Lot #45 (Sale Order 45 of 97)

BRIDGEPORT SERIES I Vertical Mill, S/N 12BR 119218 (1968), 1.5 HP, 9" x 42" PF Table w/ ACU-RITE DRO, Infinitely Variable SS 60-4200 RPM, TIBON Hardened Ways, Milling Vise

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 2,000.00
You've been outbid  to y****6! to YOU!

Placing your bid. please wait...

Bridgeport Series I Vertical Mill, S/n 12br118946, (1968), 2 Hp, 9" X 42" Pf Table, W/ Sony Dro,

Lot #46 (Sale Order 46 of 97)

BRIDGEPORT SERIES I Vertical Mill, S/N 12BR118946, (1968), 2 HP, 9" x 42" PF Table, w/ Sony DRO, Infinitely Variable SS 60-4200 RPM (In Storage)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 1,750.00
You've been outbid  to B****1! to YOU!

Placing your bid. please wait...

Brown & Sharpe Mdl. 612m Surface Grinder, S/n 523-510-1679, (1969), 5" X 10" Walker Permanent Magn

Lot #47 (Sale Order 47 of 97)

BROWN & SHARPE Mdl. 612M Surface Grinder, S/N 523-510-1679, (1969), 5" x 10" WALKER Permanent Magnetic Chuck

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Mitsui 200mdh Surface Grinder, S/n 80051602 (1980), 6" X 12" Walker Permanent Magnetic Chuck 13?" H

Lot #48 (Sale Order 48 of 97)

MITSUI 200MDH Surface Grinder, S/N 80051602 (1980), 6" x 12" WALKER Permanent Magnetic Chuck 13?" Head Travel w/ TORIT Mdl. 66 Portable Dust Collector

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Brown & Sharpe 618 Micromaster Surface Grinder S/n 523-6181-3245, 6x18 Permanent Magnetic Chuck

Lot #49 (Sale Order 49 of 97)

BROWN & SHARPE 618 Micromaster Surface Grinder S/N 523-6181-3245, 6x18 Permanent Magnetic Chuck

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Delta Carbide Tool Grinder, Mdl. 23-510 ? - Hp, W/ Pedestal

Lot #50 (Sale Order 50 of 97)

DELTA Carbide Tool Grinder, Mdl. 23-510 ? - HP, w/ Pedestal

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 50.00
You've been outbid  to g****a! to YOU!

Placing your bid. please wait...

Hobart Tr-250-hf Tig Welder, S/n 87ws03844, 250 Amp, Cart Mtd.

Lot #51 (Sale Order 51 of 97)

HOBART TR-250-HF Tig Welder, S/N 87WS03844, 250 AMP, Cart Mtd.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 375.00
You've been outbid  to j****s! to YOU!

Placing your bid. please wait...

8 Column Free Standing Crane System With 3 Independent Bays (no Cranes)

Lot #52 (Sale Order 52 of 97)

8 Column Free Standing Crane System With 3 Independent Bays (No Cranes)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Bridgeport Series I Vertical Mill, S/n 12br80091, (1965) 2 Hp, 9" X 42" Table Infinitely Variable S

Lot #53 (Sale Order 53 of 97)

BRIDGEPORT SERIES I Vertical Mill, S/N 12BR80091, (1965) 2 HP, 9" x 42" Table Infinitely Variable SS 60-4200 RPM, Milling Vise, Collets

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 1,000.00
You've been outbid  to o****s! to YOU!

Placing your bid. please wait...

Bridgeport Vertical Mill, S/n 12br162741, (1974), 9" X 42" Power Feed (pf)table, Acu-rite X-y Dro,

Lot #54 (Sale Order 54 of 97)

BRIDGEPORT Vertical Mill, S/N 12BR162741, (1974), 9" x 42" Power Feed (PF)Table, ACU-RITE X-Y DRO, 1? HP, Infinitely Variable SS 60-4200 RPM, Milling Vise & Collets

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 1,750.00
You've been outbid  to j****y! to YOU!

Placing your bid. please wait...

Bridgeport Vertical Mill, S/n 12br157173 (1973), 1? Hp, 9" X 42" Pf Table W/ Acu-rite Dro, Infinite

Lot #55 (Sale Order 55 of 97)

BRIDGEPORT Vertical Mill, S/N 12BR157173 (1973), 1.5 HP, 9" x 42" PF Table w/ ACU-RITE DRO, Infinitely Variable SS 60-4200 RPM, Collets, Milling Vise

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Allen Precision Drill Press, S/n Msv32757, (1966), Chain Adjusted Spdl., Ss 50-2400 Rpm, 30", 25 X

Lot #56 (Sale Order 56 of 97)

ALLEN Precision Drill Press, S/N MSV32757, (1966), Chain Adjusted Spdl., SS 50-2400 RPM, 30", 25 x 34 Slotted Table, Table & Spdl. Adj.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Schaublin 102 2nd Operation Lathe, S/n 125385, Belt Driven W/ Bench, 8' Swing Quick Change Collet C

Lot #57 (Sale Order 57 of 97)

SCHAUBLIN 102 2nd Operation Lathe, S/N 125385, Belt Driven w/ Bench, 8' Swing Quick Change Collet Closer

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 220.00
You've been outbid  to M****4! to YOU!

Placing your bid. please wait...

Lassy Mdl. 12f & 10s Hand Tappers

Lot #58 (Sale Order 58 of 97)

LASSY Mdl. 12F & 10S Hand Tappers

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 150.00
You've been outbid  to c****e! to YOU!

Placing your bid. please wait...

Bernhard Steinel Bs140 Tapping Unit, S/n 6506, 7" X 9" Table

Lot #59 (Sale Order 59 of 97)

BERNHARD STEINEL BS140 Tapping Unit, S/N 6506, 7" x 9" Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Tos Olomouc Horizontal Milling Machine Mdl. F44a-1, S/n 40655, 14" X 63" Table, Ss 32-1400 Rpm,

Lot #60 (Sale Order 60 of 97)

TOS OLOMOUC Horizontal Milling Machine Mdl. F44A-1, S/N 40655, 14" x 63" Table, SS 32-1400 RPM, 7.5 KW Motor, Milled & Tapped Plate on Table

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Mitsui 407 Automatic Hydraulic Surface Grinder, S/n 530 (1982), W/ Kanetsu 16" X 32" Electro Magnet

Lot #61 (Sale Order 61 of 97)

MITSUI 407 Automatic Hydraulic Surface Grinder, S/N 530 (1982), w/ KANETSU 16" x 32" Electro Magnetic Chuck w/ OS Walker Magnetic Automatic Release Microprocessor Chuck Control

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Agietron Emt-20 Edm S/n 14 (1975) W/ Agieplus 45lm Power Supply, S/n 002 (1974) 7+ Kva, W/ Sokki

Lot #62 (Sale Order 62 of 97)

AGIETRON EMT-20 EDM S/N 14 (1975) w/ AGIEPLUS 45LM Power Supply, S/N 002 (1974) 7+ KVA, w/ SOKKI X, Y, Z Axis DRO, 14.97" x 9.85 Work Table, Tank Size 13.79" x 19.7" x 8.67" w/ System 3R Tooling & Speed Control

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Landis 618 Surface Grinder, S/n 158 11, 6 X 10 Permanent Magnetic Chuck, Precision Grinding Optidre

Lot #63 (Sale Order 63 of 97)

LANDIS 618 Surface Grinder, S/N 158 11, 6 x 10 Permanent Magnetic Chuck, Precision Grinding Optidress Attmt., S/N T6633094 for Spdl., SONY DRO w/ DONALDSON 64 Cab. Portable Dust Collector, S/N 1G464794, Power Raise & Lower

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 400.00
You've been outbid  to p****e! to YOU!

Placing your bid. please wait...

Brown & Sharpe 510 Surface Grinder, S/n 523-510-1223, (1965), 5" X 10" B & S Permanent Magnetic Ch

Lot #64 (Sale Order 64 of 97)

BROWN & SHARPE 510 Surface Grinder, S/N 523-510-1223, (1965), 5" x 10" B & S Permanent Magnetic Chuck (Rebuilt by Zienowicz Bros.) w/ TORIT Mdl. 66 Portable Dust Collector

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Allen Precision Drill Press, S/n Bmd30853, (1959), 16", 14" X 20" Table, Ss 350-5200 Rpm

Lot #65 (Sale Order 65 of 97)

ALLEN Precision Drill Press, S/N BMD30853, (1959), 16", 14" x 20" Table, SS 350-5200 RPM

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 250.00
You've been outbid  to b****h! to YOU!

Placing your bid. please wait...

Blue M Pom 163f Electric Oven, S/n Pb113, Temp Range 400¡f, 204¡c, 8kw

Lot #66 (Sale Order 66 of 97)

BLUE M pom 163F Electric Oven, S/N PB113, Temp Range 400¡F, 204¡C, 8KW

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Cincinnati Zub-zero Temperature Controlled Box (freezer) Mdl. V-6-1-1-, S/ac, S/n 89-11639, S/c Comp

Lot #67 (Sale Order 67 of 97)

CINCINNATI Zub-Zero Temperature Controlled Box (Freezer) Mdl. V-6-1-1-, S/AC, S/N 89-11639, S/C Compressor, 404A Refrigerant, Top Mtd. Blowr w/ Electronic Temp Controller & Recorder

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Gorton Tool & Cutter Grinder #375, S/n 62k43811 (1962), W No 717-2 Grinding Head

Lot #68 (Sale Order 68 of 97)

GORTON Tool & Cutter Grinder #375, S/N 62K43811 (1962), w NO 717-2 Grinding Head

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Moore No 3 Jig Borer, S/n B471, (1961), 11" X 24" Table, Ss 60-2500 Rpm, X-travel - 18", Y-trave

Lot #69 (Sale Order 69 of 97)

MOORE NO 3 Jig Borer, S/N B471, (1961), 11" x 24" Table, SS 60-2500 RPM, X-Travel - 18", Y-Travel - 11", 5" Quill Travel w/ Moore Cabinet Tooling

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

South Bend No Cl370zd Lathe, S/n 35957 10" Swing X 24" Cc, 42" Oa Bed, Collet Chuck, 6" 3-jaw Chuck,

Lot #70 (Sale Order 70 of 97)

SOUTH BEND NO CL370ZD Lathe, S/N 35957 10" Swing x 24" CC, 42" OA Bed, Collet Chuck, 6" 3-Jaw Chuck, Collets, SS 50-1365 RPM

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 750.00
You've been outbid  to j****y! to YOU!

Placing your bid. please wait...

H. Tschudin Htg400 Universal Hydraulic Cylindrical Grinder, S/n 671022 ( 1967), W/ Coolant Pump 8"

Lot #71 (Sale Order 71 of 97)

H. TSCHUDIN HTG400 Universal Hydraulic Cylindrical Grinder, S/N 671022 ( 1967), w/ Coolant Pump 8" x 16", 18" Diameter Wheel, 3-Jaw Chuck, Hydraulic Traverse, Auto Infeed, Sparkout Timer

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Harig Super 612 Wet Surface Grinder, S/n 4324 (1968), W/ Dedtru Centerless Grinding Fixture, Mdl.

Lot #72 (Sale Order 72 of 97)

HARIG SUPER 612 Wet Surface Grinder, S/N 4324 (1968),

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Clausing 1640 Pedestal Drill Press, S/n 112354, 16", Ss 260-5400 Rpm, 10 X 14 Table, Foot Pedal Co

Lot #73 (Sale Order 73 of 97)

CLAUSING 1640 Pedestal Drill Press, S/N 112354, 16", SS 260-5400 RPM, 10 x 14 Table, Foot Pedal Control

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Browne & Sharpe Micromaster 618 Hydraulic Wet Surface Grinder, S/n 523-6181-7793 (1978), 6" X 18" P

Lot #74 (Sale Order 74 of 97)

BROWNE & SHARPE Micromaster 618 Hydraulic Wet Surface Grinder, S/N 523-6181-7793 (1978), 6" x 18" Permanent Magnetic Chuck

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Electro-mechano 3-spdl. Drilling Unit Geared Head, Mdl.-601j Drill Units, Ss 150-4000 Rpm, Direct O

Lot #75 (Sale Order 75 of 97)

ELECTRO-MECHANO 3-Spdl. Drilling Unit Geared head, Mdl.-601J Drill Units, SS 150-4000 RPM, Direct or Back Gear Driven, S/N 69542 w/ TELCO Lead Screw Tapper Mdl. 9000, S/N 69541 w/ Tapping Unit w/ JACOBS Chuck & S/N 69543, 20 x 65 Table w Asst. Tapping Heads

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 450.00
You've been outbid  to G****O! to YOU!

Placing your bid. please wait...

High Speed Hammer R-53 Sensitive Drills, 6"

Lot #76 (Sale Order 76 of 97)

High Speed Hammer R-53 Sensitive Drills, 6"

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 150.00
You've been outbid  to p****n! to YOU!

Placing your bid. please wait...

Speedfam 32btgw 4-head Lapping Machine, S/n 32btgw236703-2383 (1998), 11.5" Lapping Plates , 59" X 5

Lot #77 (Sale Order 77 of 97)

SPEEDFAM 32BTGW 4-HEAD LAPPING MACHINE, S/N 32BTGW236703-2383 (1998), 11.5" LAPPING PLATES , 59" x 50" TABLE, COOLANT PUMP W/ VS MIXER

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 12,000.00
You've been outbid  to B****1! to YOU!

Placing your bid. please wait...

Mht (mitsui High-tec) Automatic Hydraulic Wet Surface Grinder, Mdl. 400h3, S/n 90080665 (1990), 16

Lot #78 (Sale Order 78 of 97)

MHT (MITSUI HIGH-TEC) Automatic Hydraulic Wet Surface Grinder, Mdl. 400H3, S/N 90080665 (1990), 16 x 32 Kanestsu Electro-Magnetic Chuck w/ Control, Wheel Dresser, Auto Incremental Downfeed, Console Controller

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 12,000.00
You've been outbid  to m****2! to YOU!

Placing your bid. please wait...

Nikon Shadow Graph 3a Optical Comparator, S/n 10229, 3 Optical Lenses 10x, 20x, 50x, 14"

Lot #79 (Sale Order 79 of 97)

NIKON Shadow Graph 3A Optical Comparator, S/N 10229, 3 Optical Lenses 10X, 20X, 50X, 14"

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Parker Majestic No 2 Surface Grinder, S/n 3368.Zbs.77 (1977), 6" X 10" Walker Permanent Magnetic Chu

Lot #80 (Sale Order 80 of 97)

PARKER MAJESTIC NO 2 Surface Grinder, S/N 3368.ZBS.77 (1977), 6" x 10" WALKER Permanent Magnetic Chuck, 2.5 HP Drive, 1.5 HP Spdl. Drive, Spdl. Mdl. 1582 to 3600 RPM, Hand Feed w/ TORIT Portable Dust Collector Mdl. 66

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 2,000.00
You've been outbid  to j****y! to YOU!

Placing your bid. please wait...

Taft-pierce Surface Grinder, S/n 2275, (1966), 6x 12 Permanent Magnetic Chuck Excello Inverted Gri

Lot #81 (Sale Order 81 of 97)

TAFT-PIERCE Surface Grinder, S/N 2275, (1966), 6x 12 Permanent Magnetic Chuck EXCELLO Inverted Grinding Spdl.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Nikon 6c Profile Projector, S/n 11705, 12", X & Y Mic Axis, 5 X 10

Lot #82 (Sale Order 82 of 97)

NIKON 6C Profile Projector, S/N 11705, 12", X & Y Mic Axis, 5 x 10

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Delta 13" Bench Drill Press, S/n 30-12 16 X 14 Base

Lot #83 (Sale Order 83 of 97)

DELTA 13" Bench Drill Press, S/N 30-12 16 x 14 Base

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Unimet Unitron 9299 Microscope S/n Bi20-4580 W/exposure Meter Em-2

Lot #84 (Sale Order 84 of 97)

UNIMET Unitron 9299 Microscope S/N Bi20-4580 w/Exposure Meter EM-2

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Hurco Bmc -30 Cnc Vertical Machining Center, S/n Bc-80030395 (1989), W/ Hurco Ultimax Controls W/ Du

Lot #85 (Sale Order 85 of 97)

HURCO BMC -30 CNC Vertical Machining Center, S/N BC-80030395 (1989), w/ HURCO ULTIMAX Controls w/ Dual 11" CRT's, 24-Position ATC, SS to 4000 RPM Travels: X-Axis - 30", Y-Axis 20", Z-Axis - 20", Table 20" X 39", 32,813 Hrs.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Hurco Bmc -30 Cnc Vertical Machining Center, S/n Bk-8001119 (1989),w/ Hurco Ultimax Controls W/ Dual

Lot #86 (Sale Order 86 of 97)

HURCO BMC -30 CNC Vertical Machining Center, S/N BK-8001119 (1989),w/ HURCO ULTIMAX Controls w/ Dual 11" CRT's, 24-Position ATC, SS to 4000 RPM, Travels: X-Axis - 30", Y-Axis 20", Z-Axis - 20", Table 20" X 39", 31,868 Hrs.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Blanchard No 18-30 Rotary Surface Grinder, S/n 9836, (1959), 30" Solid Electromagnetic Chuck, 18"

Lot #87 (Sale Order 87 of 97)

BLANCHARD NO 18-30 Rotary Surface Grinder, S/N 9836, (1959), 30" Solid Electromagnetic Chuck, 18" Segmented Grinding Wheel, 12" Height Under Wheel SS to 720 RPM

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 9,250.00
You've been outbid  to B****e! to YOU!

Placing your bid. please wait...

Sheffield Iv Co-ordinate Measuring Machine S/n 2-1548-0274

Lot #90 (Sale Order 90 of 97)

SHEFFIELD IV Co-Ordinate Measuring Machine s/n 2-1548-0274

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

1995 Autojectors Hcs-90 (hydraulic Clamp Shuttle) Vertical Injection Molding Machine S/n Aj002024-06

Lot #91 (Sale Order 91 of 97)

1995 AUTOJECTORS HCS-90 (Hydraulic Clamp Shuttle) Vertical Injection Molding Machine s/n AJ002024-0695, 90-Ton , 1 1/2" Screw, 12 x 18 Upper & Lower Platens, 12" Clamp Stroke, Shot Size 8.84 Cu. In., Screw L/D Ratio 15:1 With Ann Arbor Tecnologies INX6000 Total Touch CNC Control w/Dri-Air Hopper With Arid-X 10 Dryer With IMS 100AC Port Chiller

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Wire Meter W/us Baird Drive With Speed Reducer & Olympic 1410 Wire Length Meter

Lot #92 (Sale Order 92 of 97)

Wire Meter w/US BAIRD Drive With Speed Reducer & Olympic 1410 Wire Length Meter

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Denison R045l Hydraulic Press 4-Ton, 10" Stroke, 15.5" Shut Height, 2" Ram Adjustement s/n 22123

Lot #93 (Sale Order 93 of 97)

DENISON R045L Hydraulic Press, 4-Ton, 10" Stroke, 15.5" Shut Height, 2" Ram Adjustement s/n 22123

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Denison R045l Hydraulic Press, 4-Ton, 10" Stroke, 15.5" Shut Height, 2" Ram Adjustement s/n 22119

Lot #94 (Sale Order 94 of 97)

DENISON R045L Hydraulic Press

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Perkins 32-s Press, 32-Ton, 1.5" Stroke, 8.5" Shut Height, 2.5 Ram Adjustement, s/n 47319

Lot #95 (Sale Order 95 of 97)

PERKINS 32-S Press, 32-Ton, 1.5" Stroke, 8.5" Shut Height, 2.5 Ram Adjustement, s/n 47319

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Minster Press, Model 4-SS, 32-Ton 110-220 SPM, 3" Stroke, 12" Shut Height, 2.25" Ram Adjustement

Lot #96 (Sale Order 96 of 97)

MINSTER Press, Model 4-SS, 32-Ton 110-220 SPM, 3" Stroke, 12" Shut Height, 2.25" Ram Adjustement, s/n 26099

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Waterbury Farrel 1510 Eyelet Transfer Press, S/n 515979

Lot #97 (Sale Order 97 of 97)

WATERBURY FARREL 1510 Eyelet Transfer Press, S/N 515979

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Denison R045l Hydraulic Press, 4-Ton, 10" Stroke, 15.5" Shut Height, 2" Ram Adjustement s/n 22128

Lot #98 (Sale Order 98 of 97)

Denison R045l Hydraulic Press, 4-Ton, 10" Stroke, 15.5" Shut Height, 2" Ram Adjustement s/n

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Minster, 15-Ton s/n 752131

Lot #99 (Sale Order 99 of 97)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Leblond Lathe 24" Swing x 6' CC, 20" 4-jaw Chuck

Lot #100 (Sale Order 100 of 97)

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED
You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...