Print Show Images  
Proxibid - It''s all in the Marketplace
Firearms & Military Artifacts  >  Kull Auction & Real Estate Co / Kull's Old Town Station  >  ABSOLUTE! AR-15 AUCTION

ABSOLUTE! AR-15 AUCTION

by Kull Auction & Real Estate Co / Kull's Old Town Station
Event Begins: Wednesday,  April  20,  7:00 PM Central
First lots ends Monday,  May  9,  7:00 PM Central
Last lot ends Monday,  May  9,  7:33:39 PM Central

Own your MMC Tactical, Patrol,or Recon AR-15 while you still can! NIB, state of the art, military grade assault rifles with mfg. warranty. This is a NO MINIMUM AUCTION. DON'T LOSE OUT, BID TODAY!

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #1 (Sale Order 1 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to m****2! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #2 (Sale Order 2 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to v****3! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #3 (Sale Order 3 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #4 (Sale Order 4 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to g****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #5 (Sale Order 5 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #6 (Sale Order 6 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to b****2! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #7 (Sale Order 7 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to a****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #8 (Sale Order 8 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to K****r! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #9 (Sale Order 9 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to j****r! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #10 (Sale Order 10 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #11 (Sale Order 11 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to k****w! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #12 (Sale Order 12 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to V****t! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #13 (Sale Order 13 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to p****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #14 (Sale Order 14 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to j****b! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #15 (Sale Order 15 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to r****2! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #16 (Sale Order 16 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to d****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #17 (Sale Order 17 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to r****2! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #18 (Sale Order 18 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to n****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #19 (Sale Order 19 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to j****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #20 (Sale Order 20 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to m****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #21 (Sale Order 21 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to K****7! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #22 (Sale Order 22 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to P****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #23 (Sale Order 23 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to S****Q! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #24 (Sale Order 24 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to P****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #25 (Sale Order 25 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to f****d! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #26 (Sale Order 26 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to d****3! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #27 (Sale Order 27 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 700.00

You've been outbid  to L****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #28 (Sale Order 28 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to P****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #29 (Sale Order 29 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to P****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #30 (Sale Order 30 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to M****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #31 (Sale Order 31 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to A****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #32 (Sale Order 32 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to T****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #33 (Sale Order 33 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to p****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #34 (Sale Order 34 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to P****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #35 (Sale Order 35 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to p****p! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #36 (Sale Order 36 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to m****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #37 (Sale Order 37 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #38 (Sale Order 38 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #39 (Sale Order 39 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #40 (Sale Order 40 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to l****m! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #41 (Sale Order 41 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 675.00

You've been outbid  to K****.! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #42 (Sale Order 42 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #43 (Sale Order 43 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to c****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #44 (Sale Order 44 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #45 (Sale Order 45 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #46 (Sale Order 46 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 700.00

You've been outbid  to d****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #47 (Sale Order 47 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to m****6! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #48 (Sale Order 48 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #49 (Sale Order 49 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to d****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #50 (Sale Order 50 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to p****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #51 (Sale Order 51 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #52 (Sale Order 52 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #53 (Sale Order 53 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to s****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #54 (Sale Order 54 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to F****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #55 (Sale Order 55 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to b****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #56 (Sale Order 56 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to b****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #57 (Sale Order 57 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to c****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #58 (Sale Order 58 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00

You've been outbid  to g****e! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #59 (Sale Order 59 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #60 (Sale Order 60 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #61 (Sale Order 61 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to f****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #62 (Sale Order 62 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to r****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #63 (Sale Order 63 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to b****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #64 (Sale Order 64 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #65 (Sale Order 65 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #66 (Sale Order 66 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #67 (Sale Order 67 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #68 (Sale Order 68 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #69 (Sale Order 69 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to o****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #70 (Sale Order 70 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #71 (Sale Order 71 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to s****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #72 (Sale Order 72 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 675.00

You've been outbid  to R****e! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #73 (Sale Order 73 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to t****m! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #74 (Sale Order 74 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to r****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #75 (Sale Order 75 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #76 (Sale Order 76 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #77 (Sale Order 77 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #78 (Sale Order 78 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #79 (Sale Order 79 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #80 (Sale Order 80 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 650.00

You've been outbid  to T****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #81 (Sale Order 81 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #82 (Sale Order 82 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #83 (Sale Order 83 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to d****3! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #84 (Sale Order 84 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #85 (Sale Order 85 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #86 (Sale Order 86 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 700.00

You've been outbid  to R****e! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #87 (Sale Order 87 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #88 (Sale Order 88 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to b****6! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #89 (Sale Order 89 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to L****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #90 (Sale Order 90 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #91 (Sale Order 91 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 625.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #92 (Sale Order 92 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to b****7! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #93 (Sale Order 93 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to N****T! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #94 (Sale Order 94 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to n****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #95 (Sale Order 95 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to f****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #96 (Sale Order 96 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to J****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #97 (Sale Order 97 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to v****c! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #98 (Sale Order 98 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to r****d! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #99 (Sale Order 99 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to r****d! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Recon 5.56 NATO

Lot #100 (Sale Order 100 of 150)

RECON [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrous, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Quad rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to n****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #101 (Sale Order 101 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #102 (Sale Order 102 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #103 (Sale Order 103 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #104 (Sale Order 104 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to a****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #105 (Sale Order 105 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #106 (Sale Order 106 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to c****r! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #107 (Sale Order 107 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #108 (Sale Order 108 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to l****m! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #109 (Sale Order 109 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to l****m! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #110 (Sale Order 110 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to t****t! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #111 (Sale Order 111 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to r****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #112 (Sale Order 112 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to k****r! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #113 (Sale Order 113 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to r****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #114 (Sale Order 114 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to b****5! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #115 (Sale Order 115 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to r****s! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #116 (Sale Order 116 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to K****7! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #117 (Sale Order 117 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to j****k! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #118 (Sale Order 118 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #119 (Sale Order 119 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to D****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #120 (Sale Order 120 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to J****o! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #121 (Sale Order 121 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to t****t! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #122 (Sale Order 122 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to Z****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #123 (Sale Order 123 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to d****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #124 (Sale Order 124 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to u****c! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Tactical 5.56 NATO

Lot #125 (Sale Order 125 of 150)

TACTICAL [CONDITION] NEW IN BOX [BARREL]16.1" 4152 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb break [MUZZLE] A2 flash hider. Works with A2 QD attached suppressors or MMC Armory A2 size Compensator [BOLT CARRIER GROUP] Nickel Boron coated (lubeless operation), full auto rated, MPI test, staked gas key [GAS BLOCK] MMC Armory Low Profile Gas Block [CHARGING HANDLE] Ambidextrious, hard coat anodize [HANDGUARD] TROY 13" Bravo Handguard (Single top rail) [BUTTSTOCK] Rodgers Superstoc & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1350 - 1750 - FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to s****y! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #126 (Sale Order 126 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #127 (Sale Order 127 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #128 (Sale Order 128 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to A****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #129 (Sale Order 129 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to A****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #130 (Sale Order 130 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to s****1! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #131 (Sale Order 131 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to s****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #132 (Sale Order 132 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to l****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #133 (Sale Order 133 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 500.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #134 (Sale Order 134 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to J****6! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #135 (Sale Order 135 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to l****n! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #136 (Sale Order 136 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to p****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #137 (Sale Order 137 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to p****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #138 (Sale Order 138 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to p****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #139 (Sale Order 139 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to f****4! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #140 (Sale Order 140 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to p****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #141 (Sale Order 141 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 575.00

You've been outbid  to p****p! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #142 (Sale Order 142 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to p****l! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #143 (Sale Order 143 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to M****r! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #144 (Sale Order 144 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to M****r! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #145 (Sale Order 145 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 525.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #146 (Sale Order 146 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to b****k! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #147 (Sale Order 147 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 600.00

You've been outbid  to f****d! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #148 (Sale Order 148 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to s****a! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #149 (Sale Order 149 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to f****e! to YOU!

Placing your bid. please wait...

Image not found. Image not found.

MMC Armory MA-15 Patrol 5.56 NATO

Lot #150 (Sale Order 150 of 150)

PATROL [CONDITION] NEW IN BOX [BARREL] 16.1" 4173 CrMV Steel, M4 Profile, 203 notch 1:8 twist, Mid-length Gas System, nitride treated, M4 extension [FINISH] Matte black retains 100% factory finish [UPPER RECEIVER] Machined from 7075 T6 to Mil-Spec, Indexing Marks, M4 Feed Ramps, hard coat anodize [LOWER RECEIVER] Machined from 7075 T6 to Mil-Spec, Flared Magazine Well, hard coat anodize [TRIGGER] Enhanced nitride treated Mil Spec single stage trigger, creep adjusted, polished engagement surfaces, crisp 5 lb. break [MUZZLE] MMC Armory A2 flash hider. Works with A2 QD attached suppressors [BOLT CARRIER GROUP] Nickel Boron coated (lube less operation), full auto rated, MPI tested, staked gas key [GAS BLOCK] MMC Armory Picatinny Rail Gas Block [HANDGUARD] 2-piece polymer handguard with double heat shield [CHARGING HANDLE] Mil Spec hard coat anodized [BUTTSTOCK] Polymer buttstock & 6 position Mil-Spec Polished Buffer Tube [MAGAZINE] 30 round black polymer [PISTOL GRIP] Polymer A2 Style Grip [TRIGGER GUARD] Flat Mil-Spec trigger guard [INCLUDES] Manual/Warranty Info Card - factory cardboard box [YR. MFG.] 2014-2015 [EST.] 1200 - 1600 – FFL

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: $ 550.00

You've been outbid  to l****9! to YOU!

Placing your bid. please wait...