TexMax Auctions Auction Catalog - Wireless Broadband Network Provider Auction Online Auctions

Thermotron Temperature Chamber Model S-5.5C

Lot #1 (Sale Order 1 of 756)

Thermotron Temperature Chamber Model S-5.5C - Bench Top internal chamber dimensions: 19.5-(wide) x 19-(deep) x 24-(high) External dimensions: 57-(wide) x 31-(deep) x 38-(high) Stainless steel interior; window in door; light inside chamber. Maximum temperature range from -90°F to +350°F ( - 67.8°C to + 177°C) Immediate operation with suitable power connection. High volume air circulation fan. Programmable temperature controller with digital displays. Stainless steel access ports Power: 230V 1PH 25A Cabinet:- The entire chamber is built of high-quality steel. No wood, fiberboard, plastic or similar materials are used in the construction.- The interior is constructed of 304 Series, high-nickel content stainless steel with 2B finish. The liner is heliarc welded for hermetic sealing to prevent moisture migration to insulation space.- The exterior shell is constructed of die-formed, 16 gauge galveneal, then finished in "Thermotron Blue" lacquer, Federal Standard #595-25184, sprayed over a cleaned and primed surface.- A floating liner allows minimum thermal contact between the interior and the exterior of the chamber.- Breaker strips are all stainless steel. Manual is included.

Wenesco Model M10 w/optional "Auto-Mate" elevator.

Lot #2 (Sale Order 2 of 756)

Wenesco, Inc. vapor phase solderingThis "ozone friendly" equipment is ideally suited for lab or limited production vapor phase soldering. All models are fully insulated with a stainless steel interior, drain valve, stainless steel cover, parts basket, and dripper bottle with valve. Component overheating is virtually impossible because the fluid characteristics limit the maximum temperature attainable. The vapor heats the component leads faster than the components. This principle produces a reduced component body temperature during soldering. All types of PCB's and assemblies of virtually any configuration are heated evenly. Model M10 is used for soldering assemblies up to 12.5 x 8.5 x 6 inches high, and is wired for your choice of 120V or 240V (1ph) at 3000W.- Heaters are automatically shut down if fluid tank is empty. - Stainless steel fluid tank is fully insulated with a hinged cover, and has no interior obstructions. A fluid drain valve is included. Inside measures 24"H x 14W x 10D. Outside, 28"H x 18W x 16D. Long-handled basket is 13L x 9W x 2D- Dripper bottle with valve replenishes cover fluid automatically.- Operates with all popular soldering fluids, and any "ozone safe" cover fluid.

Elenco 25MHz Oscilloscope S-1325

Lot #3 (Sale Order 3 of 756)

The Elenco S-1325 30MHz Analog Oscilloscope allows you to see a 2D graph of input (voltage, current, etc.) versus time. Powers up...we have no way of testing full functionality. Oscilloscopes are used to obtain signal characteristics of electronic devices and are used for a variety of different applications such as testing or troubleshooting. 2-Channel - OscilloscopeDual or single trace operation. Calibrated 20 step time base with x10 magnifier AUTO/NORM triggered sweep operation with AC, TV-H, TV-V and line coupling1mV/DIV sensitivity

Tektronix AM 503 Current Probe Amplifier with TM 501 power module

Lot #4 (Sale Order 4 of 756)

Tektronix AM 503 Current Probe Amplifier with the TM 501 power module. It has the probe with the unit. We have no way of testing the unit. Assume it is not calibrated.

Mastech DC Power Supply HY3005D-3

Lot #5 (Sale Order 5 of 756)

Mastech HY3005D-3 is a triple output variable regulated power supply. The unit powers up...we have no way of testing full functionality. This linear power supply has three outputs: two outputs are continuously adjustable at 0-30V DC and 0-5A, and the third output is fixed at 5V DC and 3A. What's more, the two outputs can be used either in independent, series or parallel mode, providing either two independent outputs, or one output with twice the voltage or twice the current output, up to 60V or 10A. The unit comes with 4 bright LED displays, providing accurate readout for the voltage and current value for both outputs. The voltage knobs have 10-turn pots, so it's real easy to control the outputs.

RCA RCA Victor Co.: Senior VoltOhmyst WV-98A

Lot #6 (Sale Order 6 of 756)

Rare vintage RCA Senior Voltohmyst WV-98A volt OHM meter. Plugged in the unit and it seemed to work but we are unable to test for full functionality.

FM/AM-500A Communications Service Monitor - Wireless Radio Test Set.

Lot #7 (Sale Order 7 of 756)

FM/AM-500A Communications Service Monitor - Wireless Radio Test Set. A low cost, proven service monitor for a variety of wireless communications test requirements. The FM/AM-500A is a communications service monitor that gives you the performance, field portability and durability you need in a value-priced and compact package. Since its introduction, the FM/AM-500A has earned a loyal following among wireless testing professionals. It is an incredibly rugged and field-proven communication test set. With proven performance, the FM/AM-500A is the perfect test solution for a wide range of wireless communication test requirements. Typical applications include FM/AM testing, conventional two-way radio test, SSB testing and basic communication systems performance tests. Standard Features- FM and AM Signal Generator- 2 mV receiver for AM, FM and SSB- 10 Hz to 9999.9 Hz variable audio generator and audio frequency error meter- 1 kHz audio generator- Frequency error meter with 1 Hz resolution- Peak/Average watt meter- Deviation measurement to 60 kHz- SINAD/Distortion Meter- 0.2 PPM TCXO- Microphone input- Audio demodulator outputItem is in good condition and sold as is without any connector cables except for the power cord. We are not authorized to test full capabilities.

IFR COM-120A 1 GHz Service Monitor

Lot #8 (Sale Order 8 of 756)

IFR COM-120A 1 GHz Service MonitorThe COM-120A has become an industry recognized standard in Communication Service Monitors. A tough, portable monitor with a full performance spectrum analyzer and digital oscilloscope, the COM-120A combines over 20 instruments into one unit, the versatile COM-120A offers a cost effective alternative to higher cost test sets.For RF testing professionals, the fully independent generator and receiver functions yield truer signal tracing, expanded analyzer capabilities and cross band duplex testing. In addition, the COM-120A boasts an impressive set of standard features:- Digitized oscilloscope- RF and Auxiliary RF Generator- 2 £gV receiver sensitivity- Frequency Selective RF Counter- RF Frequency Error Meter- FM Deviation Meter- £XM Deviation Meter- AF Frequency Counter- AM Modulation Meter- RF Power Meter- RF Level Meter- Distortion Meter- SINAD Meter with 0 - 55 dB range- LIVE-REF and REF-LIVE on the Spectrum Analyzer and Oscilloscope, Average, peak hold and min hold can be displayed independently- The FM and £XM Deviation Meters allow toggling of the deviation meter from the standard mode to the peak mode. The measurement shows the + and - peak deviation as two separate readings- Split Screen digitized full scan spectrum analyzer to 1 GHz- EasyCom software allows simplified testing of land mobile transceivers- EasySpan automated test software allows you to display and capture spectrum analyzer and tracking generator sweep information- LIVE-REF and REF-LIVE comparisons for spectrum analyzer display- Digitized full scan oscilloscope to 50 kHz- Enhanced PCMCIA for easy data analysis- Optional AutoCell-NT automated cellular base station test software- High speed EDACS data capture capabilities with up to 50 user defined set-ups- Full paging test for analog paging formats and advanced digital paging with the AC510 option- Optional independent tracking generator- 200 W power measurement capability- RS-232 control interface, this unit has the optional IEEE-488 (GPIB)This unit appears to work well has the cover and power cable but does not have any other cables.

EIP 545A Microwave Frequency Counter

Lot #9 (Sale Order 9 of 756)

The EIP 545A Microwave Frequency Counter is a relatively small frequency counter useful for frequencies from 10 Hz to 18 GHz. It has 3 separate inputs, 10 Hz-100 MHz, 100 MHz – 1 GHz, and 1 GHz – 18 GHz, the first two with BNC Connectors and the last with an N connector. Further, it has several options that are useful for various applications. This unit has option 3. The unit powers up but no further tests performed. Comes with a nice hard case.

TRYGON Electronics T50-750 transistor power supply

Lot #10 (Sale Order 10 of 756)

Vintage Trygon transistor power supply 0.50 VOLTS 0.750 MA. Unit powered on but no additional tests were conducted. Power cord is missing the three-prong end.

Tektronix 2445 150 MHz, Analog Oscilloscope

Lot #11 (Sale Order 11 of 756)

This oscilloscope powers up. No additional tests were performed. Manual is included. Has power cord but no additional attachments. There is a service tag hanging on this unit.Tektronix 2445 Features:Frequency Range/ Bandwidth: 150 MHz Max. Vertical Sensitivity: 5 V/div Min. Vertical Sensitivity: 2 mV/div Number of Channels: 4 CH Type (D/A): Analog

Portable network router in hard case

Lot #12 (Sale Order 12 of 756)

Two (2) hard cases with portable network routers. They each have a Motorola and a Tranzeo radio. Both units powered up but no additional test were performed. The router power indicator as well as both radio lights are green when turned on.

HP 8743A Reflection Transmission Test Unit

Lot #13 (Sale Order 13 of 756)

The HP 8743A reflection transmission test unit is a wideband RF power splitter and reflectometer with calibrated line stretcher. Pushbutton operated for either transmission or reflection measurement with network analyzer. It has the HP 8411A Harmonic Frequency converter module included. The unit powers up but no additional tests were performed.

Vintage Bird Model 43 Thruline Wattmeter

Lot #14 (Sale Order 14 of 756)

Four (4) Vintage Bird Model 43 Thruline Wattmeter. No tests were performed on these units. One Bird Electronics 800-950 MHz 1W element.

$110.00 x 4 = $440.00 Total

BK Precision 1476A 10 MHz Oscilloscope

Lot #15 (Sale Order 15 of 756)

BK Precision Model 1476A-Dual Trace 10 MHz OscilloscopeCRT featuresRectangular CRT with large 8 x 10 centimeter viewing area. High brightness, 2 kV acceleration voltage. Internal 8 x 10 division graticule eliminates parallax error. Trace rotation electrically adjustable fromfront panel.10 MHz bandwidth/35 ns rise time Conservatively rated -3 dB bandwidth is dc to 10 MHz Triggering beyond 10 MHzHigh Sensitivity2 mV/div sensitivity for full 10 MHz bandwidth. Selectable 1 mV/div sensitivity to 7 MHz Permits the low capacitance, high impedance 10:1 probe to be used for nearly all measurements, thus assuring minimum circuit loading.Unit was powered on but no additional tests performed.

IFR FM/AM-1200S Communications Service Monitor Spectrum Analyzer

Lot #16 (Sale Order 16 of 756)

Multi-function, microprocessor controlled, portable unit combines spectrum analyzer, oscilloscope, digital VFD and analog displays for monitoring radio applications. Functions: Signal generator; 250KHz to 1GHz, -127 to -20dBm, AM/FM. Receiver; 100KHz to 1GHz, 2uV sensitivity, AM/FM/SSB. Spectrum Analyzer: 1 to 1000MHz; 70dB dynamic range. Duplex Generator; separate transmit/receive lines. Oscilloscope; 1MHz. RF Power Meter; 15/150 watts (50w continuous). Options: 2=.05ppm OCXO Time Base; 12=Tracking Generator; 13=IEEE-488(in lieu of RSS-232)Unit powers up, no additional tests were performed. The unit does not power up via the internal battery.

IFR FM/AM-1200S Communications Service Monitor Spectrum Analyzer

Lot #17 (Sale Order 17 of 756)

Multi-function, microprocessor controlled, portable unit combines spectrum analyzer, oscilloscope, digital VFD and analog displays for monitoring radio applications. Functions: Signal generator; 250KHz to 1GHz, -127 to -20dBm, AM/FM. Receiver; 100KHz to 1GHz, 2uV sensitivity, AM/FM/SSB. Spectrum Analyzer: 1 to 1000MHz; 70dB dynamic range. Duplex Generator; separate transmit/receive lines. Oscilloscope; 1MHz. RF Power Meter; 15/150 watts (50w continuous). Options: 2=.05ppm OCXO Time Base; 12=Tracking Generator; 13=IEEE-488(in lieu of RSS-232)Unit powers up, no additional tests were performed. The unit does not power up via the internal battery. There is a tag from previous owner on this unit that says "No spectrum"

HP 435B Power Meter

Lot #18 (Sale Order 18 of 756)

HP 435B Power Meter is an analog power meter, compatible with the entire series of HP 8480 Power Sensors. Depending on which sensor is used, the HP 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 50 GHz. This versatile instrument also features <1% instrumentation uncertainty, low noise and drift, auto-zero, recorder output, and long cable capability up to 61 m (200 ft.). This unit indicates it has Option 2.Unit powers up, no additional tests were performed

DATA PRECISION 1750 Digital Multimeter

Lot #19 (Sale Order 19 of 756)

DATA PRECISION 1750 Digital Multimeter, no probes.Unit powers up, no additional tests were performed

Data Precision 5800 Multi Function 8 digit 100 MHz Frequency COUNTER/TIMER

Lot #20 (Sale Order 20 of 756)

Data Precision model 5800 Frequency Counter/Timer 120V, s/n: 1211Unit powers up, no additional tests were performed. The case on this unit has a cracked miss on the top-front edge.

Tektronix 453 Oscilloscope

Lot #21 (Sale Order 21 of 756)

The Tektronix 453 Oscilloscopes 50MHz bandwidth oscilloscopes offer a great value for anyone needing an oscilloscope for general hobbyist use. There is lot's of information is available on the web.Unit powers up, no additional tests were performed

Micronta 22-207 Ohm Meter

Lot #22 (Sale Order 22 of 756)

Micronta 22-207 Large Mirror Scale Volt Ohm Meter VOM

Beckman Industrial 360 DMM Digital Multimeter

Lot #23 (Sale Order 23 of 756)

Beckman Industrial 360 DMM Digital MultimeterUnit powers on with installed batteries. No other testing was done. The probe cover is broken on one corner.

Ameritec AM1 plus D1 Bulk Call Generator

Lot #24 (Sale Order 24 of 756)

The Ameritec AM1 plus D1 Bulk Call Generator is a multiple port, programmable, telephone call generator/call terminator with coincident recording of attempts, average dial-tone delay, dial tone delays, no dial tones, no rings, no confirmation tones, average post-dial delay, completions and run time data. - Construction: Modular, plug-in printed circuit boards. - Capacity: From 1 to 30 Originate and Terminate Ports ( maximum capacity 450 Originate and 450 Terminate ports when chaining multiple sets).

Helper Instruments Co SL-105 Sinadder Linear 5

Lot #25 (Sale Order 25 of 756)

Helper Instruments Co SL105 Sinadder Linear 5 Audio Generator Test EquipmentSinadder Linear 5 Model SL-105 sn 10363. Unit powers up, no additional tests were performed.

Wavetek FIBERKIT+ SM MM Fiber Test Kit

Lot #26 (Sale Order 26 of 756)

Wavetek FIBERKIT+ SM MM Fiber Test KitFor Use With Wavetek LT8155 & LT8600 Cable TestersCable Testers Not Included In Sale!Includes hard carrying case, the 1310 nm & 1550 nm modules are missing.No tests were performed on this unit.

Staco Energy Type 3PN1510 variable autotransformer

Lot #27 (Sale Order 27 of 756)

Staco Energy variable transformer type 3PN1510 - unit powers on and in good cosmetic condition, no additional tests were performed - input 120V 50/60Hz - output 0-120/ 0-140V 15A

LPKF ProtoMat C30

Lot #28 (Sale Order 28 of 756)

LPKF ProtoMat C30 circuit board plotter. - All single- and double sided analog and digital PCBs on FR3, FR4 or G10 material. - High density circuits with 4 mils (0.1 mm) tracks and 8 mils (0.2 mm) separation. - Drilling, insulation engraving and board contour routing. - Engraving of aluminum front panels, plastic signs and labels. - Milling of solder mask foils. - Engraving of photo films.Unit powers up, no additional tests were performed

Tripp Lite network cable continuity tester

Lot #29 (Sale Order 29 of 756)

Tripp Lite network cable continuity tester for Cat5, Cat5e, Cat6, Phone, CoaxUnit powers up, no additional tests were performed

Agilent/HP 54201A Digitizing Oscilloscope 300MHz

Lot #30 (Sale Order 30 of 756)

Agilent/HP 54201A Digitizing Oscilloscope 300MHzThis unit didn't power up

HP 8640b signal generator

Lot #31 (Sale Order 31 of 756)

HP 8640b signal generator option 2 & 3This unit does not power up

HP 400F AC voltmeter

Lot #32 (Sale Order 32 of 756)

A vintage HP 400F voltmeter. The HP 400F was introduced in the 1966 catalog as a solid-state AC Voltmeter for measuring AC voltages from 100 microvolts to 300 Volts rms full scale. The main improvement on the 403A was an extension of the passband, covering a frequency range from 20 Hz to 4 MHz on the Model 400F & 400FL.The HP 400F overall accuracy is 1/2% of reading on its 41/2" mirror-backed taut-band meter. The meter scale is individually calibrated with 100 divisions to provide greater resolution. An option 01 changes the galvanometer to arrange the dB scale uppermost for greater resolution in measurements where the dB readout is preferred.There is no power cord for this unit, we therefore were unable to test this unit.

HP 8740A Transmission Test Unit

Lot #33 (Sale Order 33 of 756)

The 8740A Transmission Test Unit is an RF power splitter and calibrated line stretcher for transmission measurement with network analyzer. DC to 12.4GHz. Reflection coefficient is less than 0.07 over DC to 7GHz range and less than 0.11 over 7 to 12.4GHz range. Key Features & SpecificationsDC Output Ratings - Voltage: 150V - Current: 22A - Power: 3300WProgramming Accuracy - Voltage: 0.05% + 75mV - Current: 0.1% + 44mA Output Ripple and Noise - CV p-p: 100mV - CV rms: 25mVWe were unable to test this unit.

Bausch & Lomb StereoZoom 4 microscope

Lot #34 (Sale Order 34 of 756)

Bausch & Lomb StereoZoom 4 microscope - Range 0.7X3.0 with boom standUnit seems to work fine

HP 5314A Universal Counter

Lot #35 (Sale Order 35 of 756)

The HP 5314A is a 100 MHz/100 ns Universal Counter. It features a seven-digit, seven segmentLED display with overflow indication, seven function performance, and full input signalconditioning. There are two options available for the HP 5314A. They are a TemperatureCompensated Crystal. Oscillator (TCXO, Option 001) and a battery pack for portable operation(Option 002). (this unit has option 001 only)The seven functions are: Frequency, Single-Shot Period, Period Average, Time Interval,Totalize, Ratio, and Self Check. This is accomplished by a single LSI integrated circuit. The inputsignal is AC coupled and can be conditioned as follows: slope selection, trigger level, andattenuation.This unit has a hard case and powers up, no additional tests performed

HP 8690B / Agilent 8690B Sweep Oscillator

Lot #36 (Sale Order 36 of 756)

HP 8690B / Agilent 8690B Sweep OscillatorThe 8690B Sweep Generator Mainframe is an all solid-state version of the 8690A. Uses versatile 8690 Series plug-ins (sold separately). Provides start-stop sweep, marker sweep, and CW operation functions. Sweep modes are continuously adjustable in four decade ranges, 0.01 to 100 seconds. Two frequency markers independently adjustable over entire frequency range of 0.001 to 40GHz. Typical accuracy is 1% of full scale.This unit does not power up

HP/Agilent 8410A Network Analyzer.

Lot #37 (Sale Order 37 of 756)

The HP/Agilent 8410A is a 110 MHz to 12.4 GHz, Network Analyzer.This unit does not power up

Ramsey Electronics STE3300 shielded test enclosure

Lot #38 (Sale Order 38 of 756)

The Ramsey Electronics STE3300 shielded test enclosure for- Wireless device testing - Perfect for 802.11a, b, g - Bluetooth, RFID, 3G testing - Wide variety of I/O options Designed from the ground up for wireless LAN, Bluetooth, and other microwave frequency applications where hands-on access and viewing is not required. The STE3300 is constructed of rugged .090 and .125 aluminum, dual heavy-duty latches, and two rows of double woven monel flexible RF gaskets to provide super isolation throughout the frequency range. The interior is lined with 024dB RF absorbent foam for additional isolation. Inside working space is large enough to test your devices as a complete system. Simply choose your I/O's and options from the list provided below and your enclosure will be configured to your spec!Features - RF absorbent foam liner - Exclusive double lip RF tight gasket - Universal I/O connector interface plate - Easy release latch system - Steady-hold hinge system - Designed to test complete systems

$90.00 x 2 = $180.00 Total

Corning Cable Systems coupler

Lot #39 (Sale Order 39 of 756)

Corning Cable Systems FDH coupler mod, 1x32, 3M2MM zema sc apc in/out(in the box with fiber cables)

$4.00 x 2 = $8.00 Total

Corning Cable Systems coupler

Lot #40 (Sale Order 40 of 756)

Corning Cable Systems FDH coupler mod, 1x32, 3M2MM zema sc apc in/out(in the box with fiber cables)

$6.00 x 3 = $18.00 Total

Vynckier enclosure systems - VJ1412NHW

Lot #41 (Sale Order 41 of 756)

Vynckier enclosure systems - VJ1412NHW Opaque Cover NEMA 4X enclosures with non-metallic hingesFeatures - All VJ enclosures were designed to meet the Joint Industrial Council (JIC) standards in the United States. - Enclosures are maintenance free and corrosion resistant. - Bases and opaque covers are made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F (-50°C to 150°C) and momentary exposure to temperatures up to 392°F (200°C). - All enclosures can be easily modified to customer specifications. - Gaskets are made from continuously poured polyurethane foam. - Molded on mounting flanges increase strength. - Corner ribs reinforce strength in the cover corners.ApplicationsVJ enclosures are designed for use as electrical junction boxes in highly corrosive environments and provide protection for equipment and operators from indirect electrical contact.Standards - IEC 60529 (IP66) - IEC 60439-1 - IEC 50298 - EN 60529 (IP66) - EN 60439-1 - EN 50298Approvals - UL Listed Types 3, 3R, 4, 4X, 12 & 13 - CSA 3, 3R, 4, 4X, 12 & 13 - AS Australian Standards 3131-1991 - EExeII, INTEX 84.102.378 U - LLOYD’S Register of Shipping - KEMA - CEBEC - RoHS - CE(In The Box)

$10.00 x 5 = $50.00 Total

Vynckier enclosure systems - VJ1412NHW

Lot #42 (Sale Order 42 of 756)

Vynckier enclosure systems - VJ1412NHW Opaque Cover NEMA 4X enclosures with non-metallic hingesFeatures - All VJ enclosures were designed to meet the Joint Industrial Council (JIC) standards in the United States. - Enclosures are maintenance free and corrosion resistant. - Bases and opaque covers are made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F (-50°C to 150°C) and momentary exposure to temperatures up to 392°F (200°C). - All enclosures can be easily modified to customer specifications. - Gaskets are made from continuously poured polyurethane foam. - Molded on mounting flanges increase strength. - Corner ribs reinforce strength in the cover corners.ApplicationsVJ enclosures are designed for use as electrical junction boxes in highly corrosive environments and provide protection for equipment and operators from indirect electrical contact.(Used, Out of The Box)These boxes have been built out with equipment (power supplies, switches, remote access, and/or VOIP controller). See photos for details.

$12.00 x 4 = $48.00 Total

Vynckier enclosure systems - VJ1210NHW

Lot #43 (Sale Order 43 of 756)

Vynckier enclosure systems - VJ1210NHW Opaque Cover NEMA 4X enclosures with non-metallic hingesFeatures - All VJ enclosures were designed to meet the Joint Industrial Council (JIC) standards in the United States. - Enclosures are maintenance free and corrosion resistant. - Bases and opaque covers are made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F (-50°C to 150°C) and momentary exposure to temperatures up to 392°F (200°C). - All enclosures can be easily modified to customer specifications. - Gaskets are made from continuously poured polyurethane foam. - Molded on mounting flanges increase strength. - Corner ribs reinforce strength in the cover corners.ApplicationsVJ enclosures are designed for use as electrical junction boxes in highly corrosive environments and provide protection for equipment and operators from indirect electrical contact.Standards - IEC 60529 (IP66) - IEC 60439-1 - IEC 50298 - EN 60529 (IP66) - EN 60439-1 - EN 50298Approvals - UL Listed Types 3, 3R, 4, 4X, 12 & 13 - CSA 3, 3R, 4, 4X, 12 & 13 - AS Australian Standards 3131-1991 - EExeII, INTEX 84.102.378 U - LLOYD’S Register of Shipping - KEMA - CEBEC - RoHS - CE(In The Box)

$7.00 x 5 = $35.00 Total

Vynckier enclosure systems - VJ1210NHW

Lot #44 (Sale Order 44 of 756)

Vynckier enclosure systems - VJ1210NHW Opaque Cover NEMA 4X enclosures with non-metallic hingesFeatures - All VJ enclosures were designed to meet the Joint Industrial Council (JIC) standards in the United States. - Enclosures are maintenance free and corrosion resistant. - Bases and opaque covers are made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F (-50°C to 150°C) and momentary exposure to temperatures up to 392°F (200°C). - All enclosures can be easily modified to customer specifications. - Gaskets are made from continuously poured polyurethane foam. - Molded on mounting flanges increase strength. - Corner ribs reinforce strength in the cover corners.ApplicationsVJ enclosures are designed for use as electrical junction boxes in highly corrosive environments and provide protection for equipment and operators from indirect electrical contact.Standards - IEC 60529 (IP66) - IEC 60439-1 - IEC 50298 - EN 60529 (IP66) - EN 60439-1 - EN 50298Approvals - UL Listed Types 3, 3R, 4, 4X, 12 & 13 - CSA 3, 3R, 4, 4X, 12 & 13 - AS Australian Standards 3131-1991 - EExeII, INTEX 84.102.378 U - LLOYD’S Register of Shipping - KEMA - CEBEC - RoHS - CE(In The Box)

$7.00 x 5 = $35.00 Total

Vynckier enclosure systems - VJ1210NHW

Lot #45 (Sale Order 45 of 756)

Vynckier enclosure systems - VJ1210NHW Opaque Cover NEMA 4X enclosures with non-metallic hingesFeatures - All VJ enclosures were designed to meet the Joint Industrial Council (JIC) standards in the United States. - Enclosures are maintenance free and corrosion resistant. - Bases and opaque covers are made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F (-50°C to 150°C) and momentary exposure to temperatures up to 392°F (200°C). - All enclosures can be easily modified to customer specifications. - Gaskets are made from continuously poured polyurethane foam. - Molded on mounting flanges increase strength. - Corner ribs reinforce strength in the cover corners.ApplicationsVJ enclosures are designed for use as electrical junction boxes in highly corrosive environments and provide protection for equipment and operators from indirect electrical contact.Standards - IEC 60529 (IP66) - IEC 60439-1 - IEC 50298 - EN 60529 (IP66) - EN 60439-1 - EN 50298Approvals - UL Listed Types 3, 3R, 4, 4X, 12 & 13 - CSA 3, 3R, 4, 4X, 12 & 13 - AS Australian Standards 3131-1991 - EExeII, INTEX 84.102.378 U - LLOYD’S Register of Shipping - KEMA - CEBEC - RoHS - CE(In The Box)

$6.00 x 5 = $30.00 Total

Vynckier enclosure systems - VJ1210NHW

Lot #46 (Sale Order 46 of 756)

Vynckier enclosure systems - VJ1210NHW Opaque Cover NEMA 4X enclosures with non-metallic hingesFeatures - All VJ enclosures were designed to meet the Joint Industrial Council (JIC) standards in the United States. - Enclosures are maintenance free and corrosion resistant. - Bases and opaque covers are made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F (-50°C to 150°C) and momentary exposure to temperatures up to 392°F (200°C). - All enclosures can be easily modified to customer specifications. - Gaskets are made from continuously poured polyurethane foam. - Molded on mounting flanges increase strength. - Corner ribs reinforce strength in the cover corners.ApplicationsVJ enclosures are designed for use as electrical junction boxes in highly corrosive environments and provide protection for equipment and operators from indirect electrical contact.(Used, Out of The Box)These boxes have been built out with equipment (power supplies, switches, remote access). See photos for details.

$21.00 x 2 = $42.00 Total

Fluke 73 II and Amprobe 5XP-A Multimeter

Lot #47 (Sale Order 47 of 756)

The Fluke 73 is an important part of Fluke’s reputation. In many years of service they have become the preferred models for a large number of professionals. The Fluke 73 offers exactly the right fit for a wide range of measurements. They are truly all-round performers. The 73 II is perfectly suited for many electronic applications and has the "classic" 70 series design with removable holster. The Amprobe 5XP-A Digital Multimeter provides superior features and accuracy in a smaller form factor. The 5XP-A has unique features such as VolTect™ non-contact voltage detection and our exclusive Magne-Grip™ holster that frees both hands for work. The 5XP-A is the perfect choice for residential, commercial and general troubleshooting applications.These units powered up (the 5XP-A unit has a dead battery) and have probes. No additional tests were performed.

$40.00 x 2 = $80.00 Total

Amprobe DM9C Compact Multimeter

Lot #48 (Sale Order 48 of 756)

The Amprobe DM9C Compact Multimeter offers a full set of features with 7 functions/23 ranges for use in home, auto, boat, RV or workshop.Units powered up and have probes. No additional tests were performed.

$16.00 x 2 = $32.00 Total

Amprobe DM9C Compact Multimeter

Lot #49 (Sale Order 49 of 756)

The Amprobe DM9C Compact Multimeter offers a full set of features with 7 functions/23 ranges for use in home, auto, boat, RV or workshop.Units powered up and have probes. No additional tests were performed.

$15.00 x 2 = $30.00 Total

Birdog USB Plus Satellite Meter Signal Locator 4.0 with DDSI

Lot #50 (Sale Order 50 of 756)

The BIRDOG satellite finder is a small, lightweight, signal meter. It has been the meter of choice for many years because of its ability to rapidly find the satellite and peak the dish to the highest signal.The meter comes preloaded with the most popular satellites but is also programmable by clicking here. This allows the user to load the meter with only the files needed (maximum: 64 different files).The BIRDOG USB Plus model has an easy-to-use spectrum display, a digital constellation screen and many other features, including a custom carrier feature wherein the user can create their own file on site. The meter comes with both an A/C and a D/C charging cord for it rechargeable battery and has a backlight for use in low light conditions.This unit powers up, battery seems to hold a charge, no additional tests were performed. This unit has a soft case.

Birdog Satellite Meter Signal Locator with DDSI

Lot #51 (Sale Order 51 of 756)

The BirDog satellite finder is a small (6 X 5 X 2 ), lightweight (2.2 lbs), signal meter. It has been the meter of choice for many years because of it's ability to rapidly find the satellite and peak the dish to the highest signal.The meter comes preloaded with the most popular satellites but is also programmable from it's own website, , and allows the user to load the meter with only the files needed (maximum: 64 different files).This unit powers up but gets an I2C Error

HP 435B Power Meter & HP 436A Power Meter

Lot #52 (Sale Order 52 of 756)

Travel case with two power meters and misc cables. One HP 435B and one HP 436A power meter. It also includes two power sensors, one HP 8481A and one HP 8484A power sensor.HP 435B Power Meter is an analog power meter, compatible with the entire series of HP 8480 Power Sensors. Depending on which sensor is used, the HP 435B can measure power from -65 dBm to +44 dBm, full scale, at frequencies from 100 kHz to 50 GHz. This versatile instrument also features <1% instrumentation uncertainty, low noise and drift, auto-zero, recorder output, and long cable capability up to 61 m (200 ft).The HP 436A power meter is a general-purpose digital power meter intended for manual and automatic radio-frequency (RF) and microwave-power measurements. It is compatible with the entire series of 8480 power sensors. The 436A measures either absolute or relative power. It displays absolute power in either watts or dBm, and relative power in dB. The 436A offers intuitive and straightforward manual operation as well as optional GPIB programmability (Option 022). This unit has option 022. - Display readings in Watts, dBm or dB relative eliminating measurement conversion - Peaking meter for analog adjustments - Cal factor to compensate each sensor for improved accuracy - Frequency Range: 100 kHz to 110 GHz - Power Range: -70 to +44 dBm - Power Accuracy: ±0.5% - Power Reference: Internal 50 MHz oscillator/Type-N outputBoth units powered up, no additional tests performed.

Digium S844i and travel case

Lot #53 (Sale Order 53 of 756)

Digium S844i with travel case and two other devices unidentified by the auctioneer. AA50 with four (4) station (FXS) and four (4) trunk (FXO) channels, North America The Asterisk Appliance (AA50) is a standalone embedded Asterisk-based PBX targeted for small to medium businesses (2-50 users), remote branch offices of larger organizations (2-50 users per site), and managed service providers for on-premise CPE-based solutions with SIP or IAX trunking. The AA50 also offers a hybrid solution alternative (a combination of VoIP applications using legacy telecom equipment) for enterprise customers who are not yet ready to migrate to a complete VoIP solution. No tests performed on this unit.

Radios and headsets

Lot #54 (Sale Order 54 of 756)

three Digicom Digital Wireless Porta Phone B4HSTX1000 Transceivers, cables, mics, various headsetsno tests performed on these units

Walkie talkies

Lot #55 (Sale Order 55 of 756)

three Cobra microtalkfour Motorola condition unknown

Cordless phones

Lot #56 (Sale Order 56 of 756)

five Ascom Protector MKII ATEX intrinsically safe DECT cordless telephonecondition unknown

Safety devices

Lot #57 (Sale Order 57 of 756)

nine Gas Alert Clip, one in the box and two Strike alert lightning warning device - in the boxcondition unknown

Cable mapper

Lot #58 (Sale Order 58 of 756)

Mr Meter 8 - 8-way coaxial cable mapper with casecondition unknown

Dual cat 5 cable

Lot #59 (Sale Order 59 of 756)

very long cat 5 cable ran in pair

Soldering irons

Lot #60 (Sale Order 60 of 756)

Eight soldering system, tips, clamps, solder, etc. one Oki HCT-900-11 one Weller Cooper EC1002S-0 and six OK Industries SA 1000 no tests performed on these units

$30.00 x 8 = $240.00 Total

Viking SLP-1 Paging Controller

Lot #61 (Sale Order 61 of 756)

Viking SLP-1 Paging ControllerAdd Paging to Your Existing Phone Line Without an Expensive Phone SystemThe SLP-1 Single Line Paging Controller will allow you to page family members or co-workers from any phone in your home or small office. The pages can be hard over the same speakers that are installed for music distribution. The SLP-1 connects in series with a single existing phone line. The unit has a built-in 2 watt amplifier, pre-amp output, music on hold input, intercom features, and selectable loud ringing. The SLP-1 provides an input for a lighted doorbell switch, allowing a door chime to be heard over existing speakers. Page from several different phone lines by connecting multiple units.Applications - Whole house paging from an existing phone line - Add paging, intercom, and music on hold features for small businesses - Loud ringing / night bell - Provide unique front and back door chimes when used with a C-1000B or C-2000AFeatures - Whole house/small business paging from existing phones - Built-in two-watt mono paging amplifier with gain control - Phone to phone intercom - Page from several different phone lines by connecting multiple units - Music on hold - Caller on hold - Can provide background music from an external source - Background music mute (automatic during paging or touch tone selectable while you are on a call) - Selectable loud ringing (electronic warble over speakers) - Unique front and back door chimes when used with a C-1000B or C-2000A doorbox controllers - Switch selectable On-Hold alarm tones - Stereo pre-amp input and line level output for use with receivers and high wattage amplifiers - Simple control commands - no touch tone programming - Page trigger output (12V signal for enabling paging source input on multi-source amps) - Pre-amp volume control - Bypass code - ignores all touch tones on next off-hook allowing you to steer through auto attendants, etc. - Made in USA(In Box)

$45.00 x 5 = $225.00 Total

Viking SLP-1 Paging Controller

Lot #62 (Sale Order 62 of 756)

Viking SLP-1 Paging ControllerAdd Paging to Your Existing Phone Line Without an Expensive Phone SystemThe SLP-1 Single Line Paging Controller will allow you to page family members or co-workers from any phone in your home or small office. The pages can be hard over the same speakers that are installed for music distribution. The SLP-1 connects in series with a single existing phone line. The unit has a built-in 2 watt amplifier, pre-amp output, music on hold input, intercom features, and selectable loud ringing. The SLP-1 provides an input for a lighted doorbell switch, allowing a door chime to be heard over existing speakers. Page from several different phone lines by connecting multiple units.Applications - Whole house paging from an existing phone line - Add paging, intercom, and music on hold features for small businesses - Loud ringing / night bell - Provide unique front and back door chimes when used with a C-1000B or C-2000AFeatures - Whole house/small business paging from existing phones - Built-in two-watt mono paging amplifier with gain control - Phone to phone intercom - Page from several different phone lines by connecting multiple units - Music on hold - Caller on hold - Can provide background music from an external source - Background music mute (automatic during paging or touch tone selectable while you are on a call) - Selectable loud ringing (electronic warble over speakers) - Unique front and back door chimes when used with a C-1000B or C-2000A doorbox controllers - Switch selectable On-Hold alarm tones - Stereo pre-amp input and line level output for use with receivers and high wattage amplifiers - Simple control commands - no touch tone programming - Page trigger output (12V signal for enabling paging source input on multi-source amps) - Pre-amp volume control - Bypass code - ignores all touch tones on next off-hook allowing you to steer through auto attendants, etc. - Made in USA(In Box)

$45.00 x 5 = $225.00 Total

Viking RAD-1A Remote Access Device

Lot #63 (Sale Order 63 of 756)

Viking RAD-1A Remote Access Device - Line Powered Remote Access DeviceThe RAD-1A, remote access device, gives authorized users remote access to one way paging amplifiers, digital announcers and other audio programs. A programmable access code prohibits access by unauthorized users.The RAD-1A answers on the first ring and disconnects on CPC, call time out, silence time out, busy or by dialing #7. Separate 600 ohm audio and telephone line outputs are provided, allowing connection to audio amplifiers, digital announcers, or phone systems. The user does not have to hang up and redial the RAD-1A to access other features.ApplicationsRemote Access To: - Paging systems (Viking’s amplifiers PA-2A, PA-15, PA-30 and PA-60) - Digital announcers, dictation equipment - Advertisements, radio or church programs - Audio monitoring for security purposesFeatures - Status LED turns on when the unit is active and turns off to indicate the presence of audio - Programmable 6 digit security code - Programmable 6 digit access code - Separate 600 ohm audio and telephone line outputs - Disconnects on CPC, call time out, silence time out, busy or by dialing #7 - Programmable 2 hour call timer - Programmable 1-99 second silence timer - Alternate screw terminal connection for phone line out - Provides a 500ms hookswitch flash to access other features - Provides a 2 second disconnect - Connects phone line to the 600 ohm input/ output of one-way paging amplifiers, digital announcers and other audio programs - Auxiliary contacts available for systems that need a dry contact closure (activate whenever the unit’s output is active) - Non-volatile memory (no batteries required)(In Box)

$25.00 x 5 = $125.00 Total

Viking RAD-1A Remote Access Device

Lot #64 (Sale Order 64 of 756)

Viking RAD-1A Remote Access Device - Line Powered Remote Access DeviceThe RAD-1A, remote access device, gives authorized users remote access to one way paging amplifiers, digital announcers and other audio programs. A programmable access code prohibits access by unauthorized users.The RAD-1A answers on the first ring and disconnects on CPC, call time out, silence time out, busy or by dialing #7. Separate 600 ohm audio and telephone line outputs are provided, allowing connection to audio amplifiers, digital announcers, or phone systems. The user does not have to hang up and redial the RAD-1A to access other features.ApplicationsRemote Access To: - Paging systems (Viking’s amplifiers PA-2A, PA-15, PA-30 and PA-60) - Digital announcers, dictation equipment - Advertisements, radio or church programs - Audio monitoring for security purposesFeatures - Status LED turns on when the unit is active and turns off to indicate the presence of audio - Programmable 6 digit security code - Programmable 6 digit access code - Separate 600 ohm audio and telephone line outputs - Disconnects on CPC, call time out, silence time out, busy or by dialing #7 - Programmable 2 hour call timer - Programmable 1-99 second silence timer - Alternate screw terminal connection for phone line out - Provides a 500ms hookswitch flash to access other features - Provides a 2 second disconnect - Connects phone line to the 600 ohm input/ output of one-way paging amplifiers, digital announcers and other audio programs - Auxiliary contacts available for systems that need a dry contact closure (activate whenever the unit’s output is active) - Non-volatile memory (no batteries required)(In Box)

$28.00 x 5 = $140.00 Total

Viking RAD-1A Remote Access Device

Lot #65 (Sale Order 65 of 756)

Viking RAD-1A Remote Access Device - Line Powered Remote Access DeviceThe RAD-1A, remote access device, gives authorized users remote access to one way paging amplifiers, digital announcers and other audio programs. A programmable access code prohibits access by unauthorized users.The RAD-1A answers on the first ring and disconnects on CPC, call time out, silence time out, busy or by dialing #7. Separate 600 ohm audio and telephone line outputs are provided, allowing connection to audio amplifiers, digital announcers, or phone systems. The user does not have to hang up and redial the RAD-1A to access other features.ApplicationsRemote Access To: - Paging systems (Viking’s amplifiers PA-2A, PA-15, PA-30 and PA-60) - Digital announcers, dictation equipment - Advertisements, radio or church programs - Audio monitoring for security purposesFeatures - Status LED turns on when the unit is active and turns off to indicate the presence of audio - Programmable 6 digit security code - Programmable 6 digit access code - Separate 600 ohm audio and telephone line outputs - Disconnects on CPC, call time out, silence time out, busy or by dialing #7 - Programmable 2 hour call timer - Programmable 1-99 second silence timer - Alternate screw terminal connection for phone line out - Provides a 500ms hookswitch flash to access other features - Provides a 2 second disconnect - Connects phone line to the 600 ohm input/ output of one-way paging amplifiers, digital announcers and other audio programs - Auxiliary contacts available for systems that need a dry contact closure (activate whenever the unit’s output is active) - Non-volatile memory (no batteries required)(In Box)

$29.00 x 4 = $116.00 Total

L-com AL-CAT5HPJW Outdoor High Power 10/100 Lightning Protector

Lot #66 (Sale Order 66 of 756)

The AL-CAT5HPJW is the outdoor version of the HGLN-CAT5-HP protector. This 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.Reverse PoE Compatible:This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.(In Box)

$4.00 x 3 = $12.00 Total

L-com AL-CAT5HPJW Outdoor High Power 10/100 Lightning Protector

Lot #67 (Sale Order 67 of 756)

The AL-CAT5HPJW is the outdoor version of the HGLN-CAT5-HP protector. This 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.Reverse PoE Compatible:This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.(In Box)

$3.00 x 3 = $9.00 Total

Viking 25AE Paging Horn

Lot #68 (Sale Order 68 of 756)

Viking 25AE Paging Horn - Cost Effective Speakers for Indoor and Outdoor UseThe Viking 25AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, Viking 25AE paging horns are the best method of producing understandable sound. In these environments, the directional design allows the installer to focus the sound cone down aisles and toward work areas. In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.(In Box)

$5.00 x 5 = $25.00 Total

Viking 25AE Paging Horn

Lot #69 (Sale Order 69 of 756)

Viking 25AE Paging Horn - Cost Effective Speakers for Indoor and Outdoor UseThe Viking 25AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, Viking 25AE paging horns are the best method of producing understandable sound. In these environments, the directional design allows the installer to focus the sound cone down aisles and toward work areas. In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.(In Box)

$5.00 x 5 = $25.00 Total

Viking 25AE Paging Horn

Lot #70 (Sale Order 70 of 756)

Viking 25AE Paging Horn - Cost Effective Speakers for Indoor and Outdoor UseThe Viking 25AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, Viking 25AE paging horns are the best method of producing understandable sound. In these environments, the directional design allows the installer to focus the sound cone down aisles and toward work areas. In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.(In Box)

$3.00 x 5 = $15.00 Total

Viking 25AE Paging Horn

Lot #71 (Sale Order 71 of 756)

Viking 25AE Paging Horn - Cost Effective Speakers for Indoor and Outdoor UseThe Viking 25AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, Viking 25AE paging horns are the best method of producing understandable sound. In these environments, the directional design allows the installer to focus the sound cone down aisles and toward work areas. In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.(In Box)

$8.00 x 5 = $40.00 Total

Viking 25AE Paging Horn

Lot #72 (Sale Order 72 of 756)

Viking 25AE Paging Horn - Cost Effective Speakers for Indoor and Outdoor UseThe Viking 25AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, Viking 25AE paging horns are the best method of producing understandable sound. In these environments, the directional design allows the installer to focus the sound cone down aisles and toward work areas. In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.In office and restaurant environments, it is best to distribute sound more evenly. Ceiling mounted 30AE speakers in close proximity offer the best distribution and are cost effective environments. The directional design allows the installer to focus the sound cone down aisles and toward work areas.(In Box)

$4.00 x 5 = $20.00 Total

Bogen Communications IH8A Paging Horn 15W

Lot #73 (Sale Order 73 of 756)

The Bogen Model IH8A is a double reentrant horn-type loudspeaker designed for paging applications.Excellent intelligibility, handsome compact styling, and all metal, weatherproof construction make the modelIH8A perfect for use indoors or outdoors with Bogen sound equipment.A detachable mounting bracket, which includes a wing-nut locking device, provides precise positioning ofthe horn in the vertical and horizontal planes. The unit is finished in textured mocha enamel.Features: • High intelligibility and efficiency • Weatherproof, all metal construction • 12" connecting cable for easy installationTwo horns with misc cables

$6.00 x 2 = $12.00 Total

Bogen Communications IH8A Paging Horn 15W

Lot #74 (Sale Order 74 of 756)

The Bogen Model IH8A is a double reentrant horn-type loudspeaker designed for paging applications.Excellent intelligibility, handsome compact styling, and all metal, weatherproof construction make the modelIH8A perfect for use indoors or outdoors with Bogen sound equipment.A detachable mounting bracket, which includes a wing-nut locking device, provides precise positioning ofthe horn in the vertical and horizontal planes. The unit is finished in textured mocha enamel.Features: • High intelligibility and efficiency • Weatherproof, all metal construction • 12" connecting cable for easy installationTwo horns with misc cables

$10.00 x 2 = $20.00 Total

Bogen Communications IH8A Paging Horn 15W

Lot #75 (Sale Order 75 of 756)

The Bogen Model IH8A is a double reentrant horn-type loudspeaker designed for paging applications.Excellent intelligibility, handsome compact styling, and all metal, weatherproof construction make the modelIH8A perfect for use indoors or outdoors with Bogen sound equipment.A detachable mounting bracket, which includes a wing-nut locking device, provides precise positioning ofthe horn in the vertical and horizontal planes. The unit is finished in textured mocha enamel.Features: • High intelligibility and efficiency • Weatherproof, all metal construction • 12" connecting cable for easy installation(In Box 12" connecting cable)

$13.00 x 2 = $26.00 Total

Viking PA-2A Ringing Amplifier

Lot #76 (Sale Order 76 of 756)

Viking PA-2A Ringing AmplifierThe PA-2A provides loud ringing and paging to electronic key systems, 1A2 Key systems, PABX’s as well as No-KSU phones and multiline phones. Paging is accomplished by connecting the PA-2A to a paging port or unused telephone line input (trunk port) of nearly any phone system. The PA-2A will also generate adjustable loud ringing from up to 6 analog lines or from a dry contact clo-sure. Either a loud electronic warble, or one of three other soft chime sounds may be selected. An external “night transfer” switch can be added to turn loud ringing on or off in night bell applications. The PA-2A is easy to install and eliminates the installation of multiple bells, relays and paging cards. The unit comes complete with a power supply, amplifier and (1) 25AE paging horn.Applications - Amplified loud Paging - Night bell - Loud ringingFeatures - Two watts of paging power - All lines are optically coupled for use with fax switches and analog PABX/KSU stations - Can provide background music from an external source - Paging from an unused trunk port or paging port - Four loud ringing sounds: - Electronic warble - Double gong - Quadruple chime - Door chime (ding-dong) - Provides loud ringing or night bell, from 1-6 lines for warehouses, yards, etc. - Output for controlling a 12 volt relay from 1-6 ringing lines - Page alert tone - 600 ohm output for sourcing high powered amplifiers - Made in the USA(In Box)

$11.00 x 2 = $22.00 Total

Bogen Communications SAH30 High-Efficiency Digital Switching Self-Amplified Horn (30W)

Lot #77 (Sale Order 77 of 756)

Bogen Communications SAH30 High-Efficiency Digital Switching Self-Amplified Horn (30W)The SAH30 High-Efficiency Digital Switching Self-Amplified Horn (30W) from Bogen uses less current and has lower heat dissipation than traditional analog self-amplified horns. This sturdy speaker can be positioned easily with its swivel and tilt mount. The uniquely shaped horn helps control dispersion for better intelligibility indoors or outdoors. Because of its high-efficiency digital switching amplifier, the SAH30 can operate for extended periods of time in higher ambient temperatures than conventional analog self-amplified horn speakers. - Weatherproof, plastic UV-protected housing - The SAH30 includes a sturdy aluminum mount that swivels, tilts and rotates - Digital switching amplifier draws less DC current and less heat dissipation when compared to conventional analog amplifiers(Two In Box One Out of Box)

$9.00 x 3 = $27.00 Total