This lot of Honghua Drilling Rigs has not been used, are no longer needed for the company's operations and are being sold to recover funds.

• Original Wholesale Value: $30,000,000.
Manufacturer: Honghua
• Model of drilling rig: HH- ZJ40DBS Helicopter transportable rig with 3000 Kg loads, drilling depth capacity 12000 ft (4.000 m)
MAST
• Model: JJ320/45-KH
• Effective height of mast: 146 ft (44,5 m)
• Static hook load capacity: 716.800 lbs (3.200 kN)
CROWN BLOCK
• Model TC320, manufactured by HongHua
• Max. Load: 716.800 Lbs. (3.200kN)
• No. of pulleys: 6 with perforating cable of 1.1/4” (5x50” and 1x60”)
MONKEY BOARD
• Able to work with DP 5” Range II, with Fall Protection Safety Harness System, Escape Line (Geronimo) and Ingersoll Rand Man Rider winch.
SUBESTRUCTURE
• Max. Capacity of Rotary Table beam: (320 ton)
• Setback load (Range II, 5” drill pipe): (3200 kN)
• Height of drill floor: 7,5 m (25 ft)
• Prepared to receiveWalker System removable by
• Pins, moveable in two axis “X” and “Y”.
ROTARY TABLE
• Pin Drive type, manufactured by HongHua, with opening diameter of 27-1/2" (698.5 mm), maximum rotary speed of 220 RPM and maximum static load of 1.000.000 lbs (4500 kN).
DRAW-WORKS
• DiskBrake type, actuated by 2 electric motors with minimum 870 HP each and Bit Feeder system (with proximity switch for the crown Block and Rotary Table).
• Emergency Shutdown installed in the Doghouse. 640 m (2,100 ft) Drill Line 32 mm (1-1/4”) 6×19S IWRC EIPS/RRL.
• Cat Head Model YM-16, manufactured by HongHua.
TRAVELLING BLOCK
• Model YC315, manufactured by HongHua, with 6 Sheaves and maximum static load capacity of (3500kN) (790,000 lb).
HOOK
• Model DG315, manufactured by HongHua, built to specification API Spec 8C, with maximum static load capacity of 790,000 lb. (3.500 kN)
RIG FLOOR TOOLS
• Inside BOP’s 3 ½IF – 4 ½IF, DP Elevator 3 ½” – 5”, pneumatic pipe spinner casing, manual slips. DP. 3 ½” – 5”, automatic DP. Slips, Casing: Spiders, side door, elevators, aux. elevators, slips, HFD. C56. Tong DP. Mud saver.
GENSETS
• 8 sets of Caterpillar Generator Model C-15 ATAAC, 455kW/ 60Hz / 480V, with sound proof enclosures.
AUXILIAR GENERATORS
• 2 sets of Cooltech Generator Model KJ200E, rated 200 KVA(160 KW).
Condition:
• The equipment was purchased 5 years ago, but has never been used.
• It was manufactured in China -> shipped to Brazil -> and eventually shipped to Houston.
• It has never been turned on, used or tested.
• These two rigs were part of a set of four. Rigs 3 and 4 have already been sold. They were tested and worked perfectly. Rigs 1 and 2 have NOT been tested.
• Each unit comes with 8 CAT generators.
• It has all parts, but it does not come with a drill string.
• **Please see Images for more details**
Note: Bid acceptance is pending seller's review. Seller has the right to reject all bids.