Print Show Images  
Proxibid - It''s all in the Marketplace
Industrial Machinery & Equipment  >  Loeb Winternitz Industrial Auctioneers  >  Relocating Clearance Auction Sale

Relocating Clearance Auction Sale

by Loeb Winternitz Industrial Auctioneers
Event Begins: Thursday,  November  2,  3:00 PM Central
First lots ends Wednesday,  November  29,  9:00 AM Central
Last lot ends Wednesday,  November  29,  12:59 PM Central

Huge Selection of Industrial Processing and Packaging Equipment For the Food, Chemical, Cosmetic, and Pharmaceutical Industries. All Items Must Be Sold or Scrapped!!

600 Gallon DeLaval Model ET600 S/S Horizontal Prop Agitated Insulated Bulk 600 Gallon DeLaval Model ET600 S/S Horizontal Prop Agitated Insulated Bulk

600 Gallon DeLaval Model ET600 S/S Horizontal Prop Agitated Insulated Bulk

Lot #100 (Sale Order 100 of 239)

600 Gallon DeLaval Model ET600 S/S Horizontal Prop Agitated Insulated Bulk Cooling Tank. 70 in L x 66 in W x 47 in H. Top Mounted Small Turbine Type Agitator with 1/6 HP Drive. R22 Type Refrigerant. (1) 3 in Diameter and (3) 1.5 in Diameter Tri-Clamp Top Inlets. 2 in Diameter Tri-Clamp Bottom End Outlet. Discharge Height 12.5 Inches. 18 in Top Entering Manway with Clamp Down Hinged Cover and Vent. Top Entering Fill Height Dip Stick. Interior Spray Ball with 1.5 in Diameter Tri-Clamp Top Inlet. (4) 15 in H S/S Legs. 230 V, 1 Ph, 60 Hz.

400 Gallon Breddo Model LOR 75 HP Single Shell Stainless Steel Vertical Clo 400 Gallon Breddo Model LOR 75 HP Single Shell Stainless Steel Vertical Clo

400 Gallon Breddo Model LOR 75 HP Single Shell Stainless Steel Vertical Clo

Lot #101 (Sale Order 101 of 239)

400 Gallon Breddo Model LOR 75 HP Single Shell Stainless Steel Vertical Close Top Cone Bottom Liquifier with 24 in Top Manway, 44 in Straight Side, 50 in Diameter, Multiple Top and Side Ports, Interior Stainless Steel Baffle and Spray Ball, Top Inlets: (5) Sanitary Clamp  (1) 4  in Diameter, (1) 3 in Diameter, (1) 2 1/2 in Diameter, (1) 2 in Diameter, (1) 1 1/2 in Diameter. (1) 4 1/2 in Diameter Collar Opening. (2) 2 1/2  in Diameter Sanitary Clamp Side Outlets. 3 in Diameter Sanitary Clamp Side Bottom Discharge, 20 in Discharge Height. 82 in From Floor to Manway Opening. 460 Volt, 3 Ph, 60 Hz.

125 Gallon (Approx) S/S Square Jacketed Liquifier. 39.5 in x 39.5 in x 32.5 125 Gallon (Approx) S/S Square Jacketed Liquifier. 39.5 in x 39.5 in x 32.5

125 Gallon (Approx) S/S Square Jacketed Liquifier. 39.5 in x 39.5 in x 32.5

Lot #102 (Sale Order 102 of 239)

125 Gallon (Approx) S/S Square Jacketed Liquifier. 39.5 in x 39.5 in x 32.5 in Deep Chamber. Approx 9 in Diameter Impeller with Curved Blades. Non-Pressure Rated Flow Through Style Cooling Jacket. Cone Bottom. 24 in x 24 in Top Manway with Clamp Down Hinged Cover with Secondary 13 3/4 in Diameter Round Opening with Hinged Cover. (1) 4 in Diameter Tri-Clamp Top Inlet. (1) 4 in Diameter Tri-Clamp Top Inlet with Reducer to 1 1/2 in Diameter. 3 in Diameter Tri-Clamp Bottom Outlet. 21.5 in Discharge Height. (4) S/S Legs. Bottom Temperature Probe. Right Angle Drive Shaft. 15 HP. 575 V, 3 Ph, 60 Hz, 1760 RPM, 19 Amp.

Dry and Liquid Ingredient Blending Skid with Accurate Dry Ingredient Auger Dry and Liquid Ingredient Blending Skid with Accurate Dry Ingredient Auger

Dry and Liquid Ingredient Blending Skid with Accurate Dry Ingredient Auger

Lot #103 (Sale Order 103 of 239)

Dry and Liquid Ingredient Blending Skid with Accurate Dry Ingredient Auger Feeder, Liquid Infeed and Waukesha Model 130 Positive Displacement Pump. Accurate Model 912 Feeder with 24 in x 24 in Tapered Hopper, 12 in L x 3 in Diameter S/S Screw, 3 1/2 in Diameter Discharge into Blender (S/N 968093). 5 HP S/S Rotary Impeller with 3 in Diameter Infeed with S/S Feed Hopper, 2 1/2 in Diameter Tri-Clamp Discharge, 9 in Diameter Impeller Head. 3 in Diameter Liquid Infeed Pipe. Waukesha Model 130 5 HP S/S Positive Displacement Pump. 3 in Diameter Tri-Clamp Inlet and Outlet, S/N 25150299. (4) Position 2 1/2 in Diameter S/S Pipe Manifold. (3) Flow Rate Meters. (3) S/S Electrical Disconnect Boxes. All Mounted on S/S Skid. 460 V, 3 Ph, 60 Hz.

Dry and Liquid Ingredient Blending Skid with Dry Ingredient Auger Feeder. 5 Dry and Liquid Ingredient Blending Skid with Dry Ingredient Auger Feeder. 5

Dry and Liquid Ingredient Blending Skid with Dry Ingredient Auger Feeder. 5

Lot #104 (Sale Order 104 of 239)

Dry and Liquid Ingredient Blending Skid with Dry Ingredient Auger Feeder. 5 HP S/S Rotary Impeller with 6 in Diameter Infeed with S/S Hopper. 2 1/2 in Diameter Bottom Tri-Clamp Discharge, 9 in Diameter Impeller Head, 2 in Diameter Tri-Clamp Liquid Infeed Port on Hopper. Top Mounted Feeder with 20 1/2 in x 20 1/2 in x 22 in Deep Tapered Poly Hopper with S/S Top Chute and Additional 20 in x 20 in x 45 in D S/S Detachable Chute with Lift Off Cover. 3 in Diameter x 19 in L S/S Screw. Approx 1/2 HP Screw Motor. (2) Flow Rate Meters, (2) S/S Electrical Disconnect Boxes. Rosemount 1056 Digital Analyzer. Mounted on S/S Skid. 460 V, 3 Ph, 60 Hz.

15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Ta 15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Ta

15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Ta

Lot #105 (Sale Order 105 of 239)

15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Tank with Fixed Interior Baffle. 18 1/2 in Interior Diameter, 16 3/4 in Interior Depth, Slope Bottom, Heating and Cooling Jacket, Vessel Maximum Working Pressure 15 PSIG at 250 Degrees F, Heating Jacket Maximum Working Pressure 60 PSIG at 250 Degrees F, Cooling Jacket Maximum Working Pressure 100 PSIG at 100 Degrees F. 1 HP Bottom Mounted Agitator, Fixed Interior Baffle, S/S Hinged Clamp Down Single Cover, (2) 3 in Diameter Sanitary Threaded Top Inlets, (1) 2 in Diameter Tri-Clamp Top Inlet, (1) 1 1/2 in Diameter Tri-Clamp Top Inlet, (1) 1 in Diameter Sanitary Threaded Side Top Inlet, 1 in Diameter Tri-Clamp Side Bottom Outlet with Manual Valve, 33 in Discharge Height, 2 Temperature Probes, T304 S/S. (4) 31 in H S/S Legs, (4) Weigh Cells with Kistler Morse Digital Controls, Taylor Chart Recorder, 180 Volt DC Motor.

15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Ta 15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Ta

15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Ta

Lot #110 (Sale Order 110 of 239)

15 Gallon Walker Model PZP S/S Bottom Turbine Agitated Jacketed Pressure Tank with Fixed Interior Baffle. 18 1/2 in Interior Diameter, 16 3/4 in Interior Depth, Slope Bottom, Heating and Cooling Jacket, Vessel Maximum Working Pressure 15 PSIG at 250 Degrees F, Heating Jacket Maximum Working Pressure 60 PSIG at 250 Degrees F, Cooling Jacket Maximum Working Pressure 100 PSIG at 100 Degrees F. 1 HP Bottom Mounted Agitator, Fixed Interior Baffle, S/S Hinged Clamp Down Single Cover, (2) 3 in Diameter Sanitary Threaded Top Inlets, (1) 2 in Diameter Tri-Clamp Top Inlet, (1) 1 1/2 in Diameter Tri-Clamp Top Inlet, (1) 1 in Diameter Sanitary Threaded Side Top Inlet, 1 in Diameter Tri-Clamp Side Bottom Outlet with Manual Valve, 33 in Discharge Height, 2 Temperature Probes, T304 S/S. (4) 31 in H S/S Legs, (4) Weigh Cells with Kistler Morse Digital Controls, Taylor Chart Recorder, 180 Volt DC Motor.

1,000 Gallon Mueller Stainless Steel Single Wall Vertical Tank, Top Mounted 1,000 Gallon Mueller Stainless Steel Single Wall Vertical Tank, Top Mounted

1,000 Gallon Mueller Stainless Steel Single Wall Vertical Tank, Top Mounted

Lot #115 (Sale Order 115 of 239)

1,000 Gallon Mueller Stainless Steel Single Wall Vertical Tank, Top Mounted Sweep Agitator, 1 HP Drive with 22 Final RPM. 3/208-230/460, 3.5/3.2/1.6 Amp.76 in Inside Diameter x 56 in Straight Side, Dome Top 12 in Deep, Top Inlets: (1) 2 1/2 in Clamp Style, (2) 3 in Clamp Style, Temperature Probe, (2) CIP Spray Balls, 3 in Side Bottom Clamp Style Discharge, 47 in Discharge Height w/ S/S Legs, Concave Bottom with Slight Slope

500 Gallon DCI Vertical 304 S/S Single Wall Sweep Agitated Dish Top, Cone B 500 Gallon DCI Vertical 304 S/S Single Wall Sweep Agitated Dish Top, Cone B

500 Gallon DCI Vertical 304 S/S Single Wall Sweep Agitated Dish Top, Cone B

Lot #117 (Sale Order 117 of 239)

500 Gallon DCI Vertical 304 S/S Single Wall Sweep Agitated Dish Top, Cone Bottom Tank. Top Mounted Sweep Agitator, (2) Side Mounted 4 1/2 W by 30 in L Internal Baffles, (2) Bottom Mounted 4 1/2 W by 22 in L Internal Baffles, (1) Top Mounted Adjustable 24 in L by 6 in W Internal Baffle, 10 in Deep Cone Bottom with (1) 3 in Diameter Tri-Clamp Outlet, 24 in Discharge Height, 7 in Deep Closed Dome Top with 18 in Manway, 61.5 in Inside Diameter, 36 in Straight Side, (1) 3 in Tri-Clamp Top Inlet, (1) 2 in Tri-Clamp Top Inlet, (1) 3 in Vent, (3) 40 1/2 in H S/S Pipe Legs, Temperature Probe, 230/460 V (wired 460 V), 3 Ph, 60 Hz, 1700 RPM, Gear Box Ratio 20.

400 Gallon (approx.) Vertical S/S Single Wall Insulated Tank. Wrapped in Ap 400 Gallon (approx.) Vertical S/S Single Wall Insulated Tank. Wrapped in Ap

400 Gallon (approx.) Vertical S/S Single Wall Insulated Tank. Wrapped in Ap

Lot #119 (Sale Order 119 of 239)

400 Gallon (approx.) Vertical S/S Single Wall Insulated Tank. Wrapped in Approx 2 in Thick Foam Insulation. Dome Top, Dish Bottom. 65 in Straight Side, 42 in Diameter. (2) 20 Diameter Top Manways with Hinged Clamp Down Covers. (2) 1 in Diameter and (1) 3 in Diameter Tri-Clamp Top Inlets. 4 in Diameter Tri-Clamp Bottom Side Discharge with 9 in Discharge Height. 4 in Diameter Tri-Clamp Bottom Outlet with 25 in Discharge Height. Top to Bottom Interior Dividing Baffle. (4) 25 in H S/S Legs.

400 Gallon (Approx) Vertical S/S Single Wall Tank. 8 in Deep Closed Cone To 400 Gallon (Approx) Vertical S/S Single Wall Tank. 8 in Deep Closed Cone To

400 Gallon (Approx) Vertical S/S Single Wall Tank. 8 in Deep Closed Cone To

Lot #121 (Sale Order 121 of 239)

400 Gallon (Approx) Vertical S/S Single Wall Tank. 8 in Deep Closed Cone Top with 5 in Deep x 19 1/2 in Diameter Manway, 59 in Inside Diameter, 37 in Straight Side, (3) 3 in and (1) 2 in Diameter Tri-Clamp Top Inlets, (1) 6 in Diameter Inspection Hole with Cover, (1) 4 1/2 in, (2) 3 in, (1) 2 1/2 in Diameter Tri-Clamp Side Inlets, 3 1/2 in Deep Cone Bottom with (1) 4 in Diameter Tri-Clamp Center Bottom Outlet, 18 in Discharge Height, (4) 27 in S/S Pipe Legs.

300 Gallon (Approx) Vertical S/S Single Wall Agitated Tank. Open Top, Cone 300 Gallon (Approx) Vertical S/S Single Wall Agitated Tank. Open Top, Cone

300 Gallon (Approx) Vertical S/S Single Wall Agitated Tank. Open Top, Cone

Lot #123 (Sale Order 123 of 239)

300 Gallon (Approx) Vertical S/S Single Wall Agitated Tank. Open Top, Cone Bottom, 42 in Diameter x 40 in Straight Side, Top Mounted Agitator with S/S Turbine Style Blades, S/S Bridge, Interior Side Mounted Finger Baffles, 7 Baffles Per Side, Open Top with (1) 1/3 S/S Cover, 22 in Deep Cone Bottom, 2 1/2 in Diameter Tri-Clamp CBO with Manual Valve, 11 in Discharge Height (22 in H without Valve Assembly), (4) 44 in H S/S Legs. 230 V, 3 Ph, 60 Hz.

260 Gallon (Approx) Cozzini Model CSH2000 S/S Vertical Single Wall Brine Holding Hopper Tank 260 Gallon (Approx) Cozzini Model CSH2000 S/S Vertical Single Wall Brine Holding Hopper Tank

260 Gallon (Approx) Cozzini Model CSH2000 S/S Vertical Single Wall Brine Holding Hopper Tank

Lot #125 (Sale Order 125 of 239)

260 Gallon (Approx) Cozzini Model CSH2000 S/S Vertical Single Wall Brine Holding Hopper Tank. Open Top, Slope Bottom. 35 1/2 ID, 59 in Straight Side, 60-66 in Deep. 1 1/2 in Diameter Tri-Clamp Side Top Inlet. 3 in Diameter Tri-Clamp Bottom Outlet, Discharge Height 24 in. S/S Scrape Surface Heat Exchanger. (1) Waukesha 15 HP S/S Centrifugal Pump with 3 in Diameter Tri-Clamp Inlet and 2 in Diameter Tri-Clamp Outlet. (1) Approx. 10 HP S/S Centrifugal Pump with 2 1/2 in Diameter Tri-Clamp Inlet and 2 in Diameter Tri-Clamp Outlet. All Mounted on Common S/S Frame with 36 in H Staircase, Cable Hoist, and Controls. 460 V, 3 Ph, 60 Hz.

200 Gallon Walker 316 S/S Vertical Deaerator Pressure Tank. Mezzanine Mount 200 Gallon Walker 316 S/S Vertical Deaerator Pressure Tank. Mezzanine Mount

200 Gallon Walker 316 S/S Vertical Deaerator Pressure Tank. Mezzanine Mount

Lot #127 (Sale Order 127 of 239)

200 Gallon Walker 316 S/S Vertical Deaerator Pressure Tank. Mezzanine Mount, 50 in Straight Side, 32 in Diameter. Internal and External Pressure 15 PSI at 200 Degrees F, Minimum Design Metal Temperature -20 Degrees F at 15 PSI. Top Nozzle Schedule: (3) 3 in Diameter Tri-Clamp Inlets with (2) Reduced to 2 in Diameter and (1) Reduced to 1 in Diameter with Attachments. (1) 2.5 in Diameter Tri-Clamp, (1) 4 in Diameter with Sight Glass. 22 in Diameter Clamp Down Side Manway with Sight Glass. (3) 3 in Diameter Side Tri Clamp Inlets with Sight Glasses. 4 in Diameter Tri-Clamp CBO on 55 in L x 8 in Diameter S/S Pipe. (1) 1.5 in Diameter Tri-Clamp Bottom Outlet. (1) 5 in Diameter Bottom Port and (1) 5 in Diameter Side Port For Flow Rate Meter. (2) Lifting Lugs. National Board # 6432.

200 Gallon (Approx) Vertical S/S Square Single Wall Tank. 50 in x 50 in Ins 200 Gallon (Approx) Vertical S/S Square Single Wall Tank. 50 in x 50 in Ins

200 Gallon (Approx) Vertical S/S Square Single Wall Tank. 50 in x 50 in Ins

Lot #129 (Sale Order 129 of 239)

200 Gallon (Approx) Vertical S/S Square Single Wall Tank. 50 in x 50 in Inside Dimensions, 24 in Straight Side, Flat Top with 40 in by 40 in Cover with 6 in Diameter Inspection Opening, (1) 2 in Diameter Tri-Clamp Top Inlet with Spray Ball, (1) 1 1/2 in Diameter Threaded Top  Inlet, (2) 3 in Diameter Top Pipe Inlets, (1) 20 in by 3 in Top Side Opening With Cover, (1) 2 1/2 in Diameter Threaded Side Bottom Outlet, Flat Bottom with 6 in Wide by 3 in Deep Center Channel, (1) 3 in Diameter Tri-Clamp Outlet, (1) 1 1/2 in Diameter Threaded Outlet, 4 1/2 in Discharge Height with (4) 9 in S/S Pipe Legs.

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D 200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D

Lot #131 (Sale Order 131 of 239)

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, Dish Bottom. 50 in Straight Side, 38 in Diameter. (2) 2 in Diameter Tri-Clamp Top Inlets with Bevel Seat Connections. 20 in Diameter Side Manway with Clamp Down Cover and 5 in Sight Glass. 4 in Diameter Tri-Clamp Side Top Inlet, Reduced to 2 in Diameter. 2 in Diameter Bevel Seat Side Inlet. 4 in Diameter Tri-Clamp Outlet with 48 in L x 6 in Diameter S/S Pipe with 90 Degree Bend. Discharge Height 22 in. (4) 84 in L S/S Legs. S/S Frame with Ladder and Operator Platform.

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D 200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D

Lot #132 (Sale Order 132 of 239)

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, Dish Bottom. 50 in Straight Side, 36 in Diameter. (1) 2 1/2 in Diameter and (1) 2 in Diameter Tri-Clamp Top Inlets. (1) 4 in Diameter Tri-Clamp Reduced to 2 in Side Top Inlet. (1) 2 in Diameter Bevel Seat Side Bottom Inlet. 24 in Diameter Side Manway with Clamp Down Cover and 5 in Sight Glass. 4 in Tri-Clamp Bottom Outlet with 59 in L x 6 in Diameter S/S Pipe with 30 in L 90 Degree Bend. Discharge Height 24 in. (4) 96 in L S/S Legs, (3) Position 3 in Diameter Tri-Clamp S/S Pipe Manifold with Manual Butterfly Valves.

200 Gallon APV S/S Vertical Deaerator Pressure Tank. Free Standing. Dome To 200 Gallon APV S/S Vertical Deaerator Pressure Tank. Free Standing. Dome To

200 Gallon APV S/S Vertical Deaerator Pressure Tank. Free Standing. Dome To

Lot #133 (Sale Order 133 of 239)

200 Gallon APV S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, Dish Bottom. 48 in Straight Side, 36 in Diameter. Vessel MAWP -14.7 PSI at 200 Degrees F. (1) 3 in Diameter Tri-Clamp Top Inlet. (1) 2 1/2 in Diameter Threaded Top Inlet. (1) 2.5 in Diameter Tri-Clamp Top Inlet with Light. (3) 3 in Diameter Tri-Clamp Side Inlets, 2 with Sight Glass. (2) 5 in Diameter Tri-Clamp Side Inlets For Flow Rate Meter. (1) 3 in Diameter Tri-Clamp Side Top Inlet with Bevel Seat. 4 in Diameter Tri-Clamp Bottom Outlet with 69 in L x 8 in Diameter S/S Pipe with 90 Degree Bend. 24 in Discharge Height. (4) 9 ft L S/S Legs. (2) Top Lifting Lugs. National Board # 30.

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D 200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, D

Lot #134 (Sale Order 134 of 239)

200 Gallon S/S Vertical Deaerator Pressure Tank. Free Standing. Dome Top, Dish Bottom. 50 in Straight Side, 36 in Diameter. (2) 3 in Diameter Tri-Clamp Top Inlets with Bevel Seat Connection. (4) in Diameter Tri-Clamp Side Top Inlet Reduced to 2 in Diameter. 2.5 in Diameter Side Bottom Bevel Seat Inlet. 20 in Diameter Side Manway with Clamp Down Cover and 5 in Sight Glass. 5 in Diameter Side Top Sight Glass Port. 4 in Diameter Tri-Clamp Bottom Outlet with 80 in L x 6 in Diameter S/S Pipe with 90 Degree Bend. Discharge Height 8 18 in. (4) 118 in L S/S Legs. S/S Frame with Operator Platform. 460 V, 3 Ph, 60 Hz.

150 Gallon Cozzini Model CSMH1000 Suspension Mixing Tank with Top Entering Bridge 150 Gallon Cozzini Model CSMH1000 Suspension Mixing Tank with Top Entering Bridge

150 Gallon Cozzini Model CSMH1000 Suspension Mixing Tank with Top Entering Bridge

Lot #135 (Sale Order 135 of 239)

150 Gallon Cozzini Model CSMH1000 Suspension Mixing Tank with Top Entering Bridge Mounted 1/2 HP S/S Washdown Prop Style Agitator. Vertical Single Wall Tank. 36 in ID, 31 in Deep. 28 in Straight Side. Open Top with (2) 1/3 Hinged Plexiglas Covers. Dish Bottom. Bridge Mounted Prop Style Agitator with 3 Blade Prop and 30 in L Shaft. 12 in x 6 in Rectangular Bottom Outlet Into Tri Clover Model PRS60-2-UH4-ST-S 5 HP S/S Positive Displacement Pump with 2 in Sanitary Threaded Outlet (S/N 42566101. (4) S/S Legs with Leveling Feet. S/ Flow Meter.

100 Gallon (Approx) S/S Single Wall Open Top Prop Agitated Tank 100 Gallon (Approx) S/S Single Wall Open Top Prop Agitated Tank

100 Gallon (Approx) S/S Single Wall Open Top Prop Agitated Tank

Lot #137 (Sale Order 137 of 239)

100 Gallon (Approx) S/S Single Wall Open Top Prop Agitated Tank. 29 1/2 in ID, 38 1/2 in Deep. Open Top with Infeed From Pump, Flat Bottom. 1/2 HP S/S Clamp-On Prop Style Agitator with 33 in L Shaft, (3) Blade Prop with 6 in L Blades. 1 1/2 in Diameter Tri-Clamp CBO, 11 in Discharge Height. 1/2 HP S/S Centrifugal Pump with 1 1/2 in Diameter Tri-Clamp Inlet and Outlet, 115 V. Mounted on Portable S/S Frame with Casters. Motor Controls. 115 V, 1 Ph, 60 Hz.

100 Gallon (Approx) S/S Vertical Single Wall Open Top Prop Agitated Tank 100 Gallon (Approx) S/S Vertical Single Wall Open Top Prop Agitated Tank

100 Gallon (Approx) S/S Vertical Single Wall Open Top Prop Agitated Tank

Lot #140 (Sale Order 140 of 239)

100 Gallon (Approx) S/S Vertical Single Wall Open Top Prop Agitated Tank. 30 in ID, 32 in Deep. Open Top with Infeed From Pump, Flat Bottom. 1/2 HP S/S Clamp-On Prop Style Agitator with 28 in L Shaft, (3) Blade Prop with 2 in L Blades. 1 1/2 in Diameter Tri-Clamp CBO, 11 in Discharge Height. 1 HP S/S Centrifugal Pump with 1 1/2 in Diameter Tri-Clamp Inlet and Outlet, 115 V. Mounted on Portable S/S Frame with Casters. Motor Controls. 115 V, 1 Ph, 60 Hz.

100 Gallon DCI Vertical S/S Single Wall Tank. 30 in Diameter x 34 in Straig 100 Gallon DCI Vertical S/S Single Wall Tank. 30 in Diameter x 34 in Straig

100 Gallon DCI Vertical S/S Single Wall Tank. 30 in Diameter x 34 in Straig

Lot #142 (Sale Order 142 of 239)

100 Gallon DCI Vertical S/S Single Wall Tank. 30 in Diameter x 34 in Straight Side. Dome Hinged Clamp Down Top, Dish Bottom, (1) 8 in Diameter Top Inlet with Hinged Cover, (1) 6 in Diameter Tri-Clamp, (2) 3 1/2 in Diameter Tri-Clamp, (1) 2 1/2 in Diameter Tri-Clamp Top Inlets. (1) 3 in Diameter Bottom and (1) 2 in Diameter Side Bottom Tri-Clamp Outlets, 22 in Discharge Height, Vessel MAWP 0.75 PSI at 250 Degrees F, Minimum Design Metal Temperature -20 Degrees F at 0.75 PSI. (3) 30 in L x 3 1/2 in W S/S Fixed Internal Baffles, Single Interior Sprayball, (2) 18 in H and (1) 14 in H S/S Pipe Legs. Attached S/S Control Panel with Provision For Pump and Agitator. Mounted on Common S/S Frame with Casters. 460 V, 3 Ph, 60 Hz.

Crepaco 100 Gal (1,000 lbs or Approx 14.2 Cu Ft S/S Sweep Scrape Agitated I Crepaco 100 Gal (1,000 lbs or Approx 14.2 Cu Ft S/S Sweep Scrape Agitated I

Crepaco 100 Gal (1,000 lbs or Approx 14.2 Cu Ft S/S Sweep Scrape Agitated I

Lot #144 (Sale Order 144 of 239)

Crepaco 100 Gal (1,000 lbs or Approx 14.2 Cu Ft S/S Sweep Scrape Agitated Insulated Cone Hopper. 67 in Top Dia x 21 in Deep, 9 in x 3 in Rectangular Flange Discharge Outlet. 1 HP Wash Down Motor, 3 Phase, 1140 RPM, 230/460 volts, Agitator RPM: 5.

75 Gallon Pfaudler S/S Single Wall Horizontal Mix Tank with Squirrel Cage T 75 Gallon Pfaudler S/S Single Wall Horizontal Mix Tank with Squirrel Cage T

75 Gallon Pfaudler S/S Single Wall Horizontal Mix Tank with Squirrel Cage T

Lot #146 (Sale Order 146 of 239)

75 Gallon Pfaudler S/S Single Wall Horizontal Mix Tank with Squirrel Cage Type Agitator on Stainless Steel Frame. 28 in Top Diameter, 38 in Deep, Hemispherical Bottom, (2) Removable S/S Covers, (1) 4 in, (1) 3 in and (4) 2.5 in Diameter Top Inlets, 5 HP Motor 230/460 V (wired 460V), 3 Ph, 60 Hz, 1745 RPM, 13.8/6.9 Amp.

60 Gallon (Approx.) S/S Single Wall Balance Tank with 35 1/2 in x 31 1/2 in 60 Gallon (Approx.) S/S Single Wall Balance Tank with 35 1/2 in x 31 1/2 in

60 Gallon (Approx.) S/S Single Wall Balance Tank with 35 1/2 in x 31 1/2 in

Lot #148 (Sale Order 148 of 239)

60 Gallon (Approx.) S/S Single Wall Balance Tank with 35 1/2 in x 31 1/2 in x 13 in Inside Dimensions. 13 in Straight Side, 2 in Deep Flat Top with 32 1/2 in by 23 1/2 in Removable Cover, 7 in Inspection Opening, (1) 3 1/2 in, (2) 3 in, and (3) 2 1/2 in Tri-Clamp Top Inlets, (1) 4 3/4 in and (2) 3 in Threaded Side Inlets, Angled Bottom with (1) 3 in Threaded Bottom Outlet, 9 in Discharge Height with (4) 11 in S/S Pipe Legs

50 Gallon (Approx) S/S Vertical Round Single Wall Balance Tank. 29.5 in Dia 50 Gallon (Approx) S/S Vertical Round Single Wall Balance Tank. 29.5 in Dia

50 Gallon (Approx) S/S Vertical Round Single Wall Balance Tank. 29.5 in Dia

Lot #150 (Sale Order 150 of 239)

50 Gallon (Approx) S/S Vertical Round Single Wall Balance Tank. 29.5 in Diameter x 21 in Straight Side. Open Top with 20 in Diameter Opening and Provision For Cover. 6 in Diameter Auxiliary Opening (No Cover). (4) 1 1/2 in Diameter, (1) 3 in Diameter, (1) 4 in Diameter Tri-Clamp Top Inlets. 2 in Diameter Tri-Clamp Side Bottom Outlet. 12 in Discharge Height. (2) 1 1/2 in Diameter and (1) 2 in Diameter Side Bottom Outlets. Flat Angle Bottom, (4) S/S Pipe Legs.

40 Gallon S/S Vertical Water Jacketed Tank. Open Top, Dish Bottom. 24 in In 40 Gallon S/S Vertical Water Jacketed Tank. Open Top, Dish Bottom. 24 in In

40 Gallon S/S Vertical Water Jacketed Tank. Open Top, Dish Bottom. 24 in In

Lot #152 (Sale Order 152 of 239)

40 Gallon S/S Vertical Water Jacketed Tank. Open Top, Dish Bottom. 24 in Interior Diameter x 23 1/2 in Straight Side. S/S Lift Off Cover. 1 1/2 in Diameter Tri-Clamp Top Inlet on Cover. Non-Pressurized Electrically Heated Water Jacket. 1 1/2 in Diameter Tri-Clamp Center Bottom Outlet, 17 in Discharge Height. (3) 19 in H S/S Pipe Legs. Jacket Water Inlet Spout, Temperature Probe Port. 230 V, 1 Ph, 60 Hz.

30 Gallon A and B Process Model BALTK3 S/S Vertical Single Wall Balance Tan 30 Gallon A and B Process Model BALTK3 S/S Vertical Single Wall Balance Tan

30 Gallon A and B Process Model BALTK3 S/S Vertical Single Wall Balance Tan

Lot #154 (Sale Order 154 of 239)

30 Gallon A and B Process Model BALTK3 S/S Vertical Single Wall Balance Tank. 18 in Diameter x 33 in Straight Side. Flat Top with Hinged Lid with Closing Clamps. (2) 2.5 in Diameter and (1) 3.5 in Diameter Tri-Clamp Top Inlets. (1) 2.5 in Diameter and (1) 2 in Diameter Tri-Clamp Top Side Inlets. Interior Spray Ball, Flat Bottom, 3 in Diameter Tri-Clamp Side Bottom Outlet, 4 in Diameter Tri-Clamp CBO, 11.5 in Discharge Height. (3) 14 in H S/S Legs.

Tank Ladder Tank Ladder

Tank Ladder

Lot #160 (Sale Order 160 of 239)

Tank Ladder

UNUSED APV Dual S/S Positive Displacement Cheese Pumps. (1) APV Model R3FAR UNUSED APV Dual S/S Positive Displacement Cheese Pumps. (1) APV Model R3FAR

UNUSED APV Dual S/S Positive Displacement Cheese Pumps. (1) APV Model R3FAR

Lot #200 (Sale Order 200 of 239)

UNUSED APV Dual S/S Positive Displacement Cheese Pumps. (1) APV Model R3FAR 3 HP S/S Positive Displacement Pump with 2 in Diameter Tri-Clamp Inlet and Outlet, Maximum Capacity 55 GPM, (S/N H559894) and (1) APV Model R4TS 10 HP Stainless Steel Positive Displacement Pump with 2 in Diameter Tri-Clamp Inlet and Outlet, Maximum Capacity 145 GPM (S/N H559794). Mounted in S/S Cabinet with (4) 5 1/2 in H S/S Legs and One Exhaust Fan. 10 HP Pump 230/460 V (wired 460V), 3 Ph, 60 Hz, 1755 RPM, 23.8/11.9 Amps. 3 HP Pump 230/460 V (wired 460V), 3 Ph, 60 Hz, 1755 RPM, 7.6/3.8 Amp, 6.2 Ratio.

Niro Soavi Model NS3006P S/S High Pressure Alternative Positive Displacemen Niro Soavi Model NS3006P S/S High Pressure Alternative Positive Displacemen

Niro Soavi Model NS3006P S/S High Pressure Alternative Positive Displacemen

Lot #202 (Sale Order 202 of 239)

Niro Soavi Model NS3006P S/S High Pressure Alternative Positive Displacement Pump

Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2.5 in Diameter Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2.5 in Diameter

Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2.5 in Diameter

Lot #204 (Sale Order 204 of 239)

Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2.5 in Diameter Tri-Clamp Inlet and Outlet. Nominal Capacity of 90 GPM, 0.153 Gallons Displacement Per Revolution, Maximum Pressure 300 PSI. 460 V, 3 Ph, 60 Hz, 1765 RPM, 9.53/19.1 Amp, Gear Box Ratio 4.483.

APV 15 HP S/S Rotary Positive Displacement Pump. 3 in Diameter Tri-Clamp In APV 15 HP S/S Rotary Positive Displacement Pump. 3 in Diameter Tri-Clamp In

APV 15 HP S/S Rotary Positive Displacement Pump. 3 in Diameter Tri-Clamp In

Lot #206 (Sale Order 206 of 239)

APV 15 HP S/S Rotary Positive Displacement Pump. 3 in Diameter Tri-Clamp Inlet and Outlet. With APV Model A3 S/S Pneumatic Valve Assembly with Valve and 2 1/2 in Diameter S/S Pipe with Tri-Clamp Connections. Mounted on S/S Base. 460 V, 3 Ph, 60 Hz, 38.4/19.2 Amp, 1760 RPM, TEFC.

Ampco Model RBZP1134DM 5 HP S/S Positive Displacement Pump. (1) 15 in x 4.5 Ampco Model RBZP1134DM 5 HP S/S Positive Displacement Pump. (1) 15 in x 4.5

Ampco Model RBZP1134DM 5 HP S/S Positive Displacement Pump. (1) 15 in x 4.5

Lot #208 (Sale Order 208 of 239)

Ampco Model RBZP1134DM 5 HP S/S Positive Displacement Pump. (1) 15 in x 4.5 in Rectangular Inlet with 3 in Diameter Tri-Clamp Reducer. (1) 3 in Diameter Tri-Clamp Outlet, Vertical Configuration. 230/460 Volt, 3 Ph, 60 Hz, 1760 RPM, 7/3.5 Amp. TE Motor.

Waukesha Model 130U2 S/S Positive Displacement Pump. 3 in Diameter Tri-Clam Waukesha Model 130U2 S/S Positive Displacement Pump. 3 in Diameter Tri-Clam

Waukesha Model 130U2 S/S Positive Displacement Pump. 3 in Diameter Tri-Clam

Lot #210 (Sale Order 210 of 239)

Waukesha Model 130U2 S/S Positive Displacement Pump. 3 in Diameter Tri-Clamp Inlet and Outlet. Pump Head Only.

Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2 1/2 in Diamet Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2 1/2 in Diamet

Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2 1/2 in Diamet

Lot #212 (Sale Order 212 of 239)

Waukesha Model 060U2 7.5 HP S/S Positive Displacement Pump. 2 1/2 in Diameter Tri-Clamp Inlet and Outlet. Mounted on S/S Base.

APV Model R6BS S/S 5 HP Rotary Positive Displacement Pump.240 Gallons Per M APV Model R6BS S/S 5 HP Rotary Positive Displacement Pump.240 Gallons Per M

APV Model R6BS S/S 5 HP Rotary Positive Displacement Pump.240 Gallons Per M

Lot #214 (Sale Order 214 of 239)

APV Model R6BS S/S 5 HP Rotary Positive Displacement Pump.240 Gallons Per Minute Maximum Capacity. 29 Gallons Displacement Per 100 Revolutions. 900 Maximum RPM. 3 in Diameter Tri-Clamp Inlet and Outlet. Mounted on S/S Base. 5 HP, 575 V, 3 Ph, 60 Hz. 9.20/5.3 Amp, TEFC.

Blackmer Model SNP2.5 S/S Rotary Positive Displacement Pump. 7.5 HP. Typica Blackmer Model SNP2.5 S/S Rotary Positive Displacement Pump. 7.5 HP. Typica

Blackmer Model SNP2.5 S/S Rotary Positive Displacement Pump. 7.5 HP. Typica

Lot #216 (Sale Order 216 of 239)

Blackmer Model SNP2.5 S/S Rotary Positive Displacement Pump. 7.5 HP. Typically Used in Handling a Variety of Corrosive or Caustic Fluids Such as Acids, Brines and Liquid Foods Such as Sugars, Syrups, Beer, Beet Juice, Cider, and Flavor Extracts. Approx. Maximum Flowrate of 134 GPM, Maximum Viscosity 40,000 ssu, 8,500 cSt, Maximum Differential Pressure 150 PSI, 10.34 bar, Maximum Temperature 350 Degrees F, Maximum Working Pressure 200 PSI, 13.79 bar, Maximum Pump Speed 640 RPM. 3 in Diameter Threaded Flanged Inlet and Outlet. With 51-110 Pressure Relief Valve. Mounted on C/S Base. 460 V, 3 Ph, 60 Hz, 18/9 Amp,1760 RPM, TEFC.

Sihi Model LPHR3708AB0010A2 7.5 HP Liquid Ring Vacuum Pump. 1 1/2 in Diamet Sihi Model LPHR3708AB0010A2 7.5 HP Liquid Ring Vacuum Pump. 1 1/2 in Diamet

Sihi Model LPHR3708AB0010A2 7.5 HP Liquid Ring Vacuum Pump. 1 1/2 in Diamet

Lot #220 (Sale Order 220 of 239)

Sihi Model LPHR3708AB0010A2 7.5 HP Liquid Ring Vacuum Pump. 1 1/2 in Diameter Flanged Inlet and Outlet with 1 1/2 in Flange and 1 1/2 in Diameter Tri-Clamp Attachments. 5 GPM Average Flow Rate, High Vacuum Performance (Dry Air) of 30 - 75 CFM Depending on Vacuum in Inches and Absolute Pressure. Mounted on C/S Base. 230/460 V (wired 230V), 3 Ph, 60 Hz, 1760 RPM, 21/10.5 Amps.

Kinney Model KT300 15 HP Single Stage Triplex Rotary Piston Vacuum Pump. Fr Kinney Model KT300 15 HP Single Stage Triplex Rotary Piston Vacuum Pump. Fr

Kinney Model KT300 15 HP Single Stage Triplex Rotary Piston Vacuum Pump. Fr

Lot #230 (Sale Order 230 of 239)

Kinney Model KT300 15 HP Single Stage Triplex Rotary Piston Vacuum Pump. Free Air Displacement 300 CFM. 10 Gallon Total Oil Capacity. Cooling Water 1.5 GPM. 3/8 in Cooling Water Inlet. Suction 150 Pound ANSI Flanged is 4, Discharge 150 Pound ANSI Flanged is 3. Noise Lever 72 dBA, 230/460 V, Wired 460V, 3 Ph, 60 Hz.

Cozzini 5 HP S/S Centrifugal Pump with Attached Model CSRH200LH S/S Return Hopper Cozzini 5 HP S/S Centrifugal Pump with Attached Model CSRH200LH S/S Return Hopper

Cozzini 5 HP S/S Centrifugal Pump with Attached Model CSRH200LH S/S Return Hopper

Lot #232 (Sale Order 232 of 239)

Cozzini 5 HP S/S Centrifugal Pump with Attached Model CSRH200LH S/S Return Hopper. Centrifugal Pump with 2 1/2 in Diameter Tri-Clamp Inlet and 2 in Diameter Tri-Clamp Outlet. 29.5 in x 20.5 in x 11 - 12 in Deep Sloping Bottom S/S Return Hopper with Lift Out Perforated Tray. 2 in Diameter Tri-Clamp Bottom Side Discharge, 2 in DIameter Tri-Clamp Top Inlet. Mounted on Portable S/S Base with S/S Control Panel. 460 V, 3 Ph, 60 Hz.

Lot - (2) Viking 5 HP Transfer Pumps with Variable Speed Control Gear Box, Lot - (2) Viking 5 HP Transfer Pumps with Variable Speed Control Gear Box,

Lot - (2) Viking 5 HP Transfer Pumps with Variable Speed Control Gear Box,

Lot #233 (Sale Order 233 of 239)

Lot - (2) Viking 5 HP Transfer Pumps with Variable Speed Control Gear Box, Assorted Fittings Etc.

50 Gallon Groen Model DN50 S/S Kettle Jacketed Agitated Kettle. Top Mounted 50 Gallon Groen Model DN50 S/S Kettle Jacketed Agitated Kettle. Top Mounted

50 Gallon Groen Model DN50 S/S Kettle Jacketed Agitated Kettle. Top Mounted

Lot #234 (Sale Order 234 of 239)

50 Gallon Groen Model DN50 S/S Kettle Jacketed Agitated Kettle. Top Mounted Anchor Style Agitator, 29 1/2 in Diameter x 24 in Deep, Fixed Internal Baffle,  Steam Jacket, 125 PSI Jacket Maximum Working Pressure, S/S Bridge with (2) 1/3 S/S Hinged Covers, 1 1/2 in Diameter Threaded Top Inlet, 2 in Diameter Welded Inlet Pipe, Manual Tilt Discharge with Pour Lip, Pour Lip Discharge Height 33 in, 2 in Diameter CBO with Manual Ball Valve, CBO Discharge Height 18 3/4 in, C/S Frame with (4) Legs, 460 V, 3 Ph, 60 Hz, 1/2 HP, 1725 RPM, 1.7/.85 Amps.

UNUSED Lee Stainless Steel Single Motion Sweep Agitator Blade For 250 Gallo UNUSED Lee Stainless Steel Single Motion Sweep Agitator Blade For 250 Gallo

UNUSED Lee Stainless Steel Single Motion Sweep Agitator Blade For 250 Gallo

Lot #236 (Sale Order 236 of 239)

UNUSED Lee Stainless Steel Single Motion Sweep Agitator Blade For 250 Gallon Kettle. Provisions For Scrappers, 50 in Wide x 42 in Deep Blade, Stationary Baffle, 3 HP Drive, All Stainless Steel 66 in Bridge, (3) 4 in Diameter Ports, (1) 3 in Diameter Port. 66 in L S/S Bridge. (New in Crate).

20 Gallon Groen Model N20SP S/S Jacketed Kettle. 20 in Diameter x 18 in Dee 20 Gallon Groen Model N20SP S/S Jacketed Kettle. 20 in Diameter x 18 in Dee

20 Gallon Groen Model N20SP S/S Jacketed Kettle. 20 in Diameter x 18 in Dee

Lot #238 (Sale Order 238 of 239)

20 Gallon Groen Model N20SP S/S Jacketed Kettle. 20 in Diameter x 18 in Deep, Open Top, 1/2 Steam Jacket, Maximum Working Pressure 45 PSI (Temperature Not Available), 1 1/2 in Diameter CBO with Manual Valve, Discharge Height 17 1/2 in. (3) 28 in H S/S Legs. Overall Height to Top of Kettle 42 in.

Cozzini Model AR701MC 7 inch Diameter S/S Emulsion Mill Reduction System Cozzini Model AR701MC 7 inch Diameter S/S Emulsion Mill Reduction System

Cozzini Model AR701MC 7 inch Diameter S/S Emulsion Mill Reduction System

Lot #240 (Sale Order 240 of 239)

Cozzini Model AR701MC 7 inch Diameter S/S Emulsion Mill Reduction System. Capacity of Approx. 20,000 (Coarse) to 10,000 (Fine) Pounds Per Hour. 50 HP. Available Hole Plate Sizes 1.0 mm to 9.9 mm. 2 1/2 in Diameter Sanitary Threaded Inlet. 3 in Diameter Sanitary Threaded Outlet. Available Holeplate Sizes From 1.0 mm to 9.9 mm. The Cutting Chamber Reduced the Products to the Desired Particle Size and Temperature. The Multi Cutting Chamber Can be Used with a Single Plate and Knife or Two Plates and Knives. As Meat Passes Through the Primary Knife Holder and Reduction Plate, the Knife Holder Cuts the Particles Against the Surface of the Plate. The Cut Particles Then Pass Through The Holes on the Primary Plate Toward The Secondary Knife Holder. The Particles Are Reduced Once Again and Forced Through the Smaller Holes on the Secondary Reduction Plate and Discharged. All S/S with Control Panel and Digital Timers. 460 V, 3 Ph, 60 Hz.

Romaco S/S Inline Colloid Mill with Jacketed Head. 3 in Diameter Tri-Clamp Romaco S/S Inline Colloid Mill with Jacketed Head. 3 in Diameter Tri-Clamp

Romaco S/S Inline Colloid Mill with Jacketed Head. 3 in Diameter Tri-Clamp

Lot #242 (Sale Order 242 of 239)

Romaco S/S Inline Colloid Mill with Jacketed Head. 3 in Diameter Tri-Clamp Inlet, 2 1/2 in Diameter Tri-Clamp Outlet, 12 in Diameter Head. Manually Adjustable Rotor/Stator. Approximately 40 HP (34.5 kW). Mounted on S/S Frame. 460 V, 3 Ph, 60 Hz.

S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Diameter Tri-Clamp Inl S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Diameter Tri-Clamp Inl

S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Diameter Tri-Clamp Inl

Lot #244 (Sale Order 244 of 239)

S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Diameter Tri-Clamp Inlet, 2 1/2 in Diameter Tri-Clamp Outlet, 12 in Diameter Head. Manually Adjustable Rotor/Stator. Approximately 40 HP (34.5 kW). 460 V, 3 Ph, 60 Hz.

Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Dia Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Dia

Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Dia

Lot #246 (Sale Order 246 of 239)

Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Diameter Tri-Clamp Inlet, 2 1/2 in Diameter Tri-Clamp Outlet, 12 in Diameter Head. Manually Adjustable Rotor/Stator. Approximately 40 HP (34.5 kW). 460 V, 3 Ph, 60 Hz.

Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Dia Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Dia

Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Dia

Lot #248 (Sale Order 248 of 239)

Fryma Model MZ150B S/S Inline Colloid Mill with Jacketed Head. 2 1/2 in Diameter Tri-Clamp Inlet, 2 1/2 in Diameter Tri-Clamp Outlet, 12 in Diameter Head. Manually Adjustable Rotor/Stator. Approximately 40 HP (34.5 kW). 460 V, 3 Ph, 60 Hz.

APV Model G20025B Dual Stage S/S Homogenizer. Maximum Pressure 2,500 PSI (1 APV Model G20025B Dual Stage S/S Homogenizer. Maximum Pressure 2,500 PSI (1

APV Model G20025B Dual Stage S/S Homogenizer. Maximum Pressure 2,500 PSI (1

Lot #250 (Sale Order 250 of 239)

APV Model G20025B Dual Stage S/S Homogenizer. Maximum Pressure 2,500 PSI (172 Bar). Maximum Flow Rate of 7,558 GPH (Cream Cheese). Ball Valve Construction. 2 1/2 in Diameter Tri-Clamp Inlet/Outlet. S/S Sound Enclosure. 250 HP.480 V, 3 Ph, 60 Hz.

GEA Niro Soavi Model NS3037H Dual Stage 1,700 GPH S/S 3A Dairy Sanitary Hom GEA Niro Soavi Model NS3037H Dual Stage 1,700 GPH S/S 3A Dairy Sanitary Hom

GEA Niro Soavi Model NS3037H Dual Stage 1,700 GPH S/S 3A Dairy Sanitary Hom

Lot #252 (Sale Order 252 of 239)

GEA Niro Soavi Model NS3037H Dual Stage 1,700 GPH S/S 3A Dairy Sanitary Homogenizer. Minimum Flow Rate 515 Gallons Per Hour (1950 Liters). Maximum Flow Rate 1,700 Gallons Per Hour (6500 Liters). Maximum Pressure 7 MPa (1,015 PSI). Monoblock with 3 Plungers. Plunger Diameter 65 mm, Plunger Stroke 70 mm. 2 1/2 in Diameter Tri-Clamp Inlet and Outlet. Pneumatic Actuator. S/S Cabinet. 25 HP. 460 V, 3 Ph, 60 Hz.

Tetra Pak Model ALH25 S/S Homogenizer with Dual Stage Hydraulic Valve Assem Tetra Pak Model ALH25 S/S Homogenizer with Dual Stage Hydraulic Valve Assem

Tetra Pak Model ALH25 S/S Homogenizer with Dual Stage Hydraulic Valve Assem

Lot #254 (Sale Order 254 of 239)

Tetra Pak Model ALH25 S/S Homogenizer with Dual Stage Hydraulic Valve Assembly, 2 1/4 In diameter plungers, max. capacity 3,340 GPH at 2,300 PSI (160 bar), minimum capacity 1,320 GPH at 5,800 PSI (400 bar), ABB Motor, 100 HP, 1780 rpm, 460 V, 114 amps, 60 Hz, 3 phase

Gaulin Model 2500MF45A30SS Dual Stage 3,000 GPH S/S Homogenizer with Stainl Gaulin Model 2500MF45A30SS Dual Stage 3,000 GPH S/S Homogenizer with Stainl

Gaulin Model 2500MF45A30SS Dual Stage 3,000 GPH S/S Homogenizer with Stainl

Lot #256 (Sale Order 256 of 239)

Gaulin Model 2500MF45A30SS Dual Stage 3,000 GPH S/S Homogenizer with Stainless Steel Cabinet. 3 Cylinders, 3,000 PSIG. 4 Inch Plunger Stroke. 2 1/2 in Diameter Threaded Inlet/Outlet. 75 HP. 480 V, 3 Ph, 60 Hz.

AFECO Model 510 Approx. 37.5 Cu Ft (Total Capacity) Stainless Steel Dual Sh AFECO Model 510 Approx. 37.5 Cu Ft (Total Capacity) Stainless Steel Dual Sh

AFECO Model 510 Approx. 37.5 Cu Ft (Total Capacity) Stainless Steel Dual Sh

Lot #257 (Sale Order 257 of 239)

AFECO Model 510 Approx. 37.5 Cu Ft (Total Capacity) Stainless Steel Dual Shaft Vacuum Ribbon Blender. Trough Dimensions 3 ft Wide x 5 ft Long x 30 in Deep. Trough Depth From Bottom to Top of Ribbons 18 in. Approximate Working Capacity of 22.5 Cu Ft. Mounted on Load Cells. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Injectstar Model Scanio 5 ft Dia x 6 ft Long Drum Stainless Steel Tumbler w Injectstar Model Scanio 5 ft Dia x 6 ft Long Drum Stainless Steel Tumbler w

Injectstar Model Scanio 5 ft Dia x 6 ft Long Drum Stainless Steel Tumbler w

Lot #258 (Sale Order 258 of 239)

Injectstar Model Scanio 5 ft Dia x 6 ft Long Drum Stainless Steel Tumbler with Hydraulic Power Pack, Load Cells, Digital Controls. 6 ft Useable Drum Length. 2 ft L Tapered Loading Area. Approx 1,300 Liter Capacity. 5 ft W x 7 ft L x 55 in H Drum. Machine footprint 160in L x 83 in W x 10 ft H. 440 V, 3 Ph, 60 Hz. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Blentech Model HD77 Stainless Steel Hydraulic Powered Vat Dumper. 6 ft  Dum Blentech Model HD77 Stainless Steel Hydraulic Powered Vat Dumper. 6 ft  Dum

Blentech Model HD77 Stainless Steel Hydraulic Powered Vat Dumper. 6 ft  Dum

Lot #259 (Sale Order 259 of 239)

Blentech Model HD77 Stainless Steel Hydraulic Powered Vat Dumper. 6 ft  Dump Height with Chute, Hydraulic Power Pack, Dual Lift Cylinders (Located at 518 Reimann Avenue, Sandwich, IL 60548)

26.5 Cu Ft Rietz Model RS18K5204 Non Jacketed S/S Twin Shaft Solid Screw Mi 26.5 Cu Ft Rietz Model RS18K5204 Non Jacketed S/S Twin Shaft Solid Screw Mi

26.5 Cu Ft Rietz Model RS18K5204 Non Jacketed S/S Twin Shaft Solid Screw Mi

Lot #260 (Sale Order 260 of 239)

26.5 Cu Ft Rietz Model RS18K5204 Non Jacketed S/S Twin Shaft Solid Screw Mixer with S/S Cover. 48 in L x 36 in W x 26.5 in D Trough. S/S Lift Off Top Cover with (2) 2 in Diameter and (1) 1.5 in Diameter Sanitary Threaded Inlets, (1) 8 in Diameter, (1) 13.5 in Diameter and (1) 14 in Diameter Top Hand Holes with Lift Off Covers. 4 in Diameter x 47.5 in Long Shaft. 17.5 in Diameter Screws. Various Screw Centers. 3 in Diameter Sanitary Threaded Bottom End Discharge. 27.5 in Discharge Height. (2) 5 HP Drive Motors. (4) 27 in H S/S. S/S Frame.

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Lot #262 (Sale Order 262 of 239)

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Total Capacity. 71 in L x 57 in W x 56 in D Chamber. 4 in W Mixer Blades on 1 1/2 in Diameter Posts. 6 in Diameter Center Shaft. 4 in Diameter Tri-Clamp End Bottom Discharge, 5 in Discharge Height. (2) 3 in Diameter Tri-Clamp End Top Inlets, One on Each End. (1) 2 1/2 in Diameter and (1) 1 1/2 in Diameter Tri-Clamp Side Top Inlets. (3) S/S Hinged Covers. Hydraulically Driven, (4) S/S Legs.

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Lot #264 (Sale Order 264 of 239)

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Total Capacity. 71 in L x 57 in W x 56 in D Chamber. 4 in W Mixer Blades on 1 1/2 in Diameter Posts. 6 in Diameter Center Shaft. 4 in Diameter Tri-Clamp End Bottom Discharge, 5 in Discharge Height. (2) 3 in Diameter Tri-Clamp End Top Inlets, One on Each End. (1) 2 1/2 in Diameter and (1) 1 1/2 in Diameter Tri-Clamp Side Top Inlets. (3) S/S Hinged Covers. Hydraulically Driven, (4) S/S Legs.

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Lot #266 (Sale Order 266 of 239)

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Total Capacity. 71 in L x 57 in W x 56 in D Chamber. 4 in W Mixer Blades on 1 1/2 in Diameter Posts. 6 in Diameter Center Shaft. 4 in Diameter Tri-Clamp End Bottom Discharge, 5 in Discharge Height. (2) 3 in Diameter Tri-Clamp End Top Inlets, One on Each End. (1) 2 1/2 in Diameter and (1) 1 1/2 in Diameter Tri-Clamp Side Top Inlets. (2) S/S Hinged Covers. Hydraulically Driven (4) S/S Legs.

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft

Lot #268 (Sale Order 268 of 239)

Rietz Bepex Model RC60 S/S Single Wall Horizontal Creamer. Approx 130 Cu Ft Total Capacity. 71 in L x 57 in W x 56 in D Chamber. 4 in W Mixer Blades on 1 1/2 in Diameter Posts. 6 in Diameter Center Shaft. 4 in Diameter Tri-Clamp End Bottom Discharge, 5 in Discharge Height. (2) 3 in Diameter Tri-Clamp End Top Inlets, One on Each End. (1) 2 1/2 in Diameter and (1) 1 1/2 in Diameter Tri-Clamp Side Top Inlets. (2) S/S Hinged Covers. Hydraulically Driven (4) S/S Legs.

Stainless Steel Portable Pneumatic Prop Style Agitator. 36 in L Shaft, Pneu Stainless Steel Portable Pneumatic Prop Style Agitator. 36 in L Shaft, Pneu

Stainless Steel Portable Pneumatic Prop Style Agitator. 36 in L Shaft, Pneu

Lot #269 (Sale Order 269 of 239)

Stainless Steel Portable Pneumatic Prop Style Agitator. 36 in L Shaft, Pneumatic Controls, Mounted on Portable S/S Tilting Hoist. Mixer Operated By a 10 HP Single Speed Motor, Lift Powered By a Single Air Cylinder with Approx 24 in Lift. 460 V, 3 P, 60 Hz. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Vanmark S/S Ceiling Mounted Potato Dewatering Flume. 50 in L x 30 in W Dewa Vanmark S/S Ceiling Mounted Potato Dewatering Flume. 50 in L x 30 in W Dewa

Vanmark S/S Ceiling Mounted Potato Dewatering Flume. 50 in L x 30 in W Dewa

Lot #270 (Sale Order 270 of 239)

Vanmark S/S Ceiling Mounted Potato Dewatering Flume. 50 in L x 30 in W Dewatering Area with S/S Grate. 3/4 in Between Bars on Grate, 9 in Diameter Flanged Inlet and Waste Water Outlet, 6 ft L x 30 in W S/S Discharge Chute.

S/S Hydrosieve, 18 in x 32 in L screen (6 openings per in), 18 in W x 32 in S/S Hydrosieve, 18 in x 32 in L screen (6 openings per in), 18 in W x 32 in

S/S Hydrosieve, 18 in x 32 in L screen (6 openings per in), 18 in W x 32 in

Lot #272 (Sale Order 272 of 239)

S/S Hydrosieve, 18 in x 32 in L screen (6 openings per in), 18 in W x 32 in Deep trough w/ 4 blade stirrer agitator, 18 in x 16 in x 18 in deep infeed trough w/ hinged cover and  4 1/2 in dia threaded bottom drain outlet, 9 in dia (8 bolt) flanged water drain outlet, 4 in Dia (8 bolt) flanged side bottom waste product outlet w/ auger drive motor (no auger).

GEM Equipment S/S Infeed Dewatering Hopper, 36 in W x 34 in L S/S Screen, 4 GEM Equipment S/S Infeed Dewatering Hopper, 36 in W x 34 in L S/S Screen, 4

GEM Equipment S/S Infeed Dewatering Hopper, 36 in W x 34 in L S/S Screen, 4

Lot #276 (Sale Order 276 of 239)

GEM Equipment S/S Infeed Dewatering Hopper, 36 in W x 34 in L S/S Screen, 4 in Diameter Tri-Clamp Inlets/Outlets, 36 in L x 30 in W x 45 in D Hopper with Clamp on Feed Chute and Clamp Down Screen Cover, S/S Frame and Mounting Flanges.

Carruthers Autoslicer 5100 1 Dimension S/S Slicer Dicer with Single Spiral Carruthers Autoslicer 5100 1 Dimension S/S Slicer Dicer with Single Spiral

Carruthers Autoslicer 5100 1 Dimension S/S Slicer Dicer with Single Spiral

Lot #278 (Sale Order 278 of 239)

Carruthers Autoslicer 5100 1 Dimension S/S Slicer Dicer with Single Spiral Knife. Maximum Product Width 12 Inches, 64 in L x 12 in W Infeed Conveyor with Rubber Belt, 20 in L x 11 in W Floating Top Feed Conveyor with Rubber Belt, Mounted on S/S Frame with Casters and Leveling Feet. 2 HP, Carruthers Auto-Slicer, model 5100. Slicer is ideal for fresh, tempered or pre-cooked meats-poultry as well as tropical fruit and produce. Slicer utilizes continuous flow of product on infeed conveyor which can accommodate product up to 12 in wide. Product is controlled by a floating top feed conveyor with adjustable pitch and weight, holding the product in place it moves into the crosscut slicing zone. Product throughput can be in excess of 5,000 pounds per hour depending on product.

Dixie Union Model Nova Stainless Steel Slicer with 10 in wide x 10 ft long Dixie Union Model Nova Stainless Steel Slicer with 10 in wide x 10 ft long

Dixie Union Model Nova Stainless Steel Slicer with 10 in wide x 10 ft long

Lot #279 (Sale Order 279 of 239)

Dixie Union Model Nova Stainless Steel Slicer with 10 in wide x 10 ft long Stainless Steel Conveyor with Plastic Belt (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Kaps All Model FSA36, 36 in Diameter Stainless Steel Rotary Accumulation Ta Kaps All Model FSA36, 36 in Diameter Stainless Steel Rotary Accumulation Ta

Kaps All Model FSA36, 36 in Diameter Stainless Steel Rotary Accumulation Ta

Lot #282 (Sale Order 282 of 239)

Kaps All Model FSA36, 36 in Diameter Stainless Steel Rotary Accumulation Table. S/S Table Top, 2 in H Adjustable Side Rail. Variable Speed Controls. Currently Set with 36 1/2 in Table Height. C/S Base with Height Adjustable Feet. 110 V, 1 Ph, 60 Hz.

36 in Diameter Stainless Steel Rotary Accumulation Table. S/S Table Top, 2 36 in Diameter Stainless Steel Rotary Accumulation Table. S/S Table Top, 2

36 in Diameter Stainless Steel Rotary Accumulation Table. S/S Table Top, 2

Lot #284 (Sale Order 284 of 239)

36 in Diameter Stainless Steel Rotary Accumulation Table. S/S Table Top, 2 in H Side Rail. 5 1/2 in W Opening. Motor Vari-Speed Controls. Currently Set with 34 1/2 in Table Height/ C/S Case with Adjustable Height Feet. 110 V, 1 Ph, 60 Hz.

OK Machine Corp Model 200 Bag in Box Inserter. Makes a Bag From a Roll of G OK Machine Corp Model 200 Bag in Box Inserter. Makes a Bag From a Roll of G

OK Machine Corp Model 200 Bag in Box Inserter. Makes a Bag From a Roll of G

Lot #286 (Sale Order 286 of 239)

OK Machine Corp Model 200 Bag in Box Inserter. Makes a Bag From a Roll of Gussetted Polyethylene Tubing, Places The Bag Into a Case, Tray or Crate and Cuffs The Bag Over The Edges. Minimum Case Size of 10 in x 8 in x 6 in. Maximum Case Size of 23 in x 16 in x 18 in. Maximum Speed Up to 17 Cases Per Minute. Bag Gauges 0.6-5.0 Mil Depending on Material. Left to Right Configuration. 32 in H Banjo Belt Conveyor with 40 in Long Infeed Section, Adjustable Width. Gast Model R6350A2 4.8 HP Regenerative Blower. 480 V, 3 Ph, 60 Hz.

Sure Kap 6 Head Inline Pressure Overflow Filler. Currently Equipped with (6 Sure Kap 6 Head Inline Pressure Overflow Filler. Currently Equipped with (6

Sure Kap 6 Head Inline Pressure Overflow Filler. Currently Equipped with (6

Lot #288 (Sale Order 288 of 239)

Sure Kap 6 Head Inline Pressure Overflow Filler. Currently Equipped with (6) 5/8 in Diameter Filling Nozzles. 10 Position S/S Hose Manifold with 1 1/2 in Diameter Tri-Clamp Connections. 48 in L Nozzle Bar. S/S Drip Catch Tray. Approx 25 Gallon S/S Overflow Tank with Float Control (24 in x 12 in x 24 in), 1 in Diameter Threaded Bottom Outlet with Manual Valve. Manually Adjustable Nozzle Bar Height. Allen Bradley Panel View 300 Digital HMI. S/S Frame with Casters. Includes 4 1/2 in W x 115 in L Table Top Conveyor with S/S Chain and Frame. 1/2 HP Electric Motor, Adjustable Guide Rails.

Approx 160 Oz Straight Line Non Conveyorized Raque Model TPF3 Air Operated Approx 160 Oz Straight Line Non Conveyorized Raque Model TPF3 Air Operated

Approx 160 Oz Straight Line Non Conveyorized Raque Model TPF3 Air Operated

Lot #292 (Sale Order 292 of 239)

Approx 160 Oz Straight Line Non Conveyorized Raque Model TPF3 Air Operated Piston Pump / Filler. 3in. Bevel Seat W/ Sanitary Fittings Hopper: S/S Feed Hopper Filling Speed: Up To 20 Fills Per Min Cylinders: 6 1/2in. Dia X 9in. L, 14 Cu In To 200 Cu In Capacity Air Requirements: 20 Scfm Misc: Will Accept Cylinders From 2 1/2in. To 6 In. Bore Frame: C/S Mobile Unit, Portable Base

Hinds Bock Model SP128 S/S Single Head Piston Gallon Filler. 1 oz - 128 oz Hinds Bock Model SP128 S/S Single Head Piston Gallon Filler. 1 oz - 128 oz

Hinds Bock Model SP128 S/S Single Head Piston Gallon Filler. 1 oz - 128 oz

Lot #294 (Sale Order 294 of 239)

Hinds Bock Model SP128 S/S Single Head Piston Gallon Filler. 1 oz - 128 oz Output (with change parts). 30 in Diameter x 23 in Deep S/S Cone Shaped Agitated Feed Hopper with 1/5 HP Agitator Drive and 1/2 S/S Covers . (2) 1 1/2 in Diameter Tri Clamp Top Inlets. 6 in Diameter x 12 in L Piston Housing. 1 1/2 in Diameter Tri Clamp Discharge Piping with 1 in W Outlet and Pneumatic Valve. Mounted on S/S Frame with Casters. 120 V, 1 Ph, 60 Hz.

National Instrument 4 Head Piston Table Top Filler, micro adjustment, Capac National Instrument 4 Head Piston Table Top Filler, micro adjustment, Capac

National Instrument 4 Head Piston Table Top Filler, micro adjustment, Capac

Lot #296 (Sale Order 296 of 239)

National Instrument 4 Head Piston Table Top Filler, micro adjustment, Capacity: 4x130cc, Max RPM: 20, Controls: foot switch / continuous operation selection switch, speed control, foot petal, Adj Ht S/S stand

PSG YUE Model 20 S/S Automatic Pre Formed Stand Up Pouch Filling and Cappin PSG YUE Model 20 S/S Automatic Pre Formed Stand Up Pouch Filling and Cappin

PSG YUE Model 20 S/S Automatic Pre Formed Stand Up Pouch Filling and Cappin

Lot #298 (Sale Order 298 of 239)

PSG YUE Model 20 S/S Automatic Pre Formed Stand Up Pouch Filling and Capping Machine with Rotary Filler and Screw Capper. 2 Pre Formed Pouches Fill at Same Time. Pouch Output 20-160 Pouches Per Minute. 20 PPM at 500 ml Fill. Maximum Fill Volume up to 500 ml. 1,000-1,400 PPH Maximum, Maximum Pouch Dimensions 140 mm W x 240 mm H. 84 in L S/S Pouch Feeder Conveyor with 1/2 in Wide Nozzle Track, Belt Drive with Pusher to Advance Pouches. Approx 13 Gallon Capacity S/S Product Feed Tank, 19 3/4 in L x 11 3/4 in W x 13 1/2 in D, S/S Cover with Hinged Opening, 3 in Diameter Tri-Clamp Top Inlet, 1 1/2 in Diameter Threaded Bottom End Discharge with Manual Valve, (2) Pnumatic Product Pumps with 3/4 in Diameter Threaded Outlets, Maximum Temperature Rating of Product to Fill is 160 Degrees F,  Mounted on 45 in H S/S Table. (2) Head Filling Station with 3/8 in Outside Diameter Diving Nozzles. Water Rinse Station. 17 in Diameter S/S Vibratory Bowl Cap Feeder, 69 in Discharge Height Mounted on S/S Stand with Steps. 41 in L S/S Cap Feed Chute. (2) Head Rotary Chuck Cap Tightener. Dual Discharge Station with Pneumatic Pusher Ejector. 19 3/4 in Wide S/S Discharge Chute. 30 in Diameter Rotary Carousel with 16 Pouch Notches. Allen Bradley Panelview 1000 PLC with Touch Screen. 220V, 3 Ph, 60 Hz, 30 Amp, 90 PSI.

Pfaudler Model RP2514BFT 14 Head S/S Rotary Piston Filler. 6.5 in Pitch wit Pfaudler Model RP2514BFT 14 Head S/S Rotary Piston Filler. 6.5 in Pitch wit

Pfaudler Model RP2514BFT 14 Head S/S Rotary Piston Filler. 6.5 in Pitch wit

Lot #300 (Sale Order 300 of 239)

Pfaudler Model RP2514BFT 14 Head S/S Rotary Piston Filler. 6.5 in Pitch with 3/8 in Diameter, 5 1/2 in L Nozzles. 10 oz Capacity, 1 7/8 in Diameter Cylinders, Rising Container Stools, No-Container No-Fill Detector, Bottom Up Fill, Worm Screw Infeed with Star Wheel Infeed and Discharge, Top Mounted 17 in Diameter x 22 in Deep S/S Product Hopper with Hinged Cover. 2 in Diameter Tri-Clamp Top Inlet. S/S Contact Parts, Painted C/S Base. 2 HP, 208-230/460 V (Wired 460V), 3 Ph, 60 Hz, 2 HP, 1750 RPM, 6.2/3.1 Amp, Gear Box Ratio 12.25.

Filamatic Model AB8 Benchtop Semi-Automatic Single Nozzle Piston Filler. Si Filamatic Model AB8 Benchtop Semi-Automatic Single Nozzle Piston Filler. Si

Filamatic Model AB8 Benchtop Semi-Automatic Single Nozzle Piston Filler. Si

Lot #302 (Sale Order 302 of 239)

Filamatic Model AB8 Benchtop Semi-Automatic Single Nozzle Piston Filler. Single Pump with Fill Volume Ranges From 1ml - 260ml. Up to 23 RPM. Fill Accuracy +/- .5%. 260-1598 S/S 2 1/2 in Diameter S/S Piston Pump. Accommodates Free Flowing, Semi-Viscous, Viscous, Molten Products and Product with Particulates. Single Cycle or Continuous Operation. With Model FS1 Foot Switch. 115 V, 1 Ph, 60 Hz.

Filamatic Model AB5 Benchtop Semi-Automatic Single Nozzle Piston Filler. Fi Filamatic Model AB5 Benchtop Semi-Automatic Single Nozzle Piston Filler. Fi

Filamatic Model AB5 Benchtop Semi-Automatic Single Nozzle Piston Filler. Fi

Lot #304 (Sale Order 304 of 239)

Filamatic Model AB5 Benchtop Semi-Automatic Single Nozzle Piston Filler. Fill Volume Ranges From 1ml - 130ml. Up to 35 RPM. Fill Accuracy +/_ .5%. Accommodates Free Flowing, Semi-Viscous, Viscous, Molten Products and Product with Particulates. 115 V, 1 Ph, 60 Hz.

Mateer Mdl 1909 S/S Auger Filler, 22 in x 16 in deep S/S cone Hopper, (2) p Mateer Mdl 1909 S/S Auger Filler, 22 in x 16 in deep S/S cone Hopper, (2) p

Mateer Mdl 1909 S/S Auger Filler, 22 in x 16 in deep S/S cone Hopper, (2) p

Lot #306 (Sale Order 306 of 239)

Mateer Mdl 1909 S/S Auger Filler, 22 in x 16 in deep S/S cone Hopper, (2) piece S/S Cover w/ 2 in triclamp inlet and level sensor, 1 1/2 Hp 3/460/60 drive w/ Leeson Speedmaster Ac motor speed control, 6 in L auger, 2 in triclamp outlet, Unit Mounted On Adjustable Height Floor Stand

(6) National Instrument FUS130 13-130 cc Capacity S/S Pistons with Suckback (6) National Instrument FUS130 13-130 cc Capacity S/S Pistons with Suckback

(6) National Instrument FUS130 13-130 cc Capacity S/S Pistons with Suckback

Lot #309 (Sale Order 309 of 239)

(6) National Instrument FUS130 13-130 cc Capacity S/S Pistons with Suckback Adjustment. .437 in Inlet, .3125 Outlet.  Piston Dimensions 1.680 in x .940 in. Shaft Size .435 in. Piston Stroke 3.75 in. Housing Dimensions 1.885 O.D., 1.750 I.D. Adjustable Suckback Valve and Clean Out Screw Valve.

Single Head S/S 2 Up Vertical Form Fill and Seal Machine with Film Registra Single Head S/S 2 Up Vertical Form Fill and Seal Machine with Film Registra

Single Head S/S 2 Up Vertical Form Fill and Seal Machine with Film Registra

Lot #310 (Sale Order 310 of 239)

Single Head S/S 2 Up Vertical Form Fill and Seal Machine with Film Registration. Ideal For Use with Fluid Products. One Filling Head with Single Piston. 14 in Diameter x 16 in Deep S/S Feed Hopper. 1 1/2 in Diameter Tri Clamp Connections. 5/8 in OD Filling Tube. 6 in L Cutting Jaws, Fin Seal Rollers, 18 in L Film Roll with 1 in Diameter Core, 12.5 in L Film Feed Rolls, 22 in L S/S Forming Tube. Digital Touch Screen Controls, Omron Digital Heater Controls. 230 V, 3 Ph, 60 Hz.

CFS Tiromat Model 3000/325 Horizontal Roll Stock Vacuum Packaging Machine. CFS Tiromat Model 3000/325 Horizontal Roll Stock Vacuum Packaging Machine.

CFS Tiromat Model 3000/325 Horizontal Roll Stock Vacuum Packaging Machine.

Lot #312 (Sale Order 312 of 239)

CFS Tiromat Model 3000/325 Horizontal Roll Stock Vacuum Packaging Machine. Right to Left Configuration. 325 mm Wide Forming Web. 320 mm Wide Sealing Web. 6 ft L Product Loading Area. Guillotine Style Cross Web Knives. (3) Roll Slitter. (2) Scrap Film Take Up Reels. 10.5 in W x 31 in L Discharge Conveyor. Busch Vacuum Pump. 400 V, 3 Ph, 60 Hz, 50 Amp.

VC999  Model RS420 Stainless Steel Rollstock Thermoform Vacuum Packaging Ma VC999  Model RS420 Stainless Steel Rollstock Thermoform Vacuum Packaging Ma

VC999  Model RS420 Stainless Steel Rollstock Thermoform Vacuum Packaging Ma

Lot #314 (Sale Order 314 of 239)

VC999  Model RS420 Stainless Steel Rollstock Thermoform Vacuum Packaging Machine, 4 ft Long Loading area, 10 in x 16 in forming and sealing area, 16 in W film Rollers, Electrical: 3/60/220, Air Requirement: 6-10 bar, Crosscut knife assembly, The VC999 RS420 is a high production rollstock thermoformer. By using multiple tooling and high cycle speeds this machine allows for large production quantities. As the pack is formed by deep drawing flexible film during the machine cycle, costs for packaging materials and logistics are kept at a minimum, The truly modular design of the VC999 RS420 offers maximal flexibility. With the straightforward linear design of the VC999 RS420, it is very easy to add and integrate peripheral equipment such as dosing, filling, printing, coding, top and bottom web labelling, sorting device, metal detection or weighing units. The programming of the machine is user friendly; all functions can be easily controlled by touch screen with user-guidance. The stainless steel construction is easily cleaned and complies with the strictest hygiene regulations. The truly modular design perfectly accommodates current and future requirements and offers maximum flexibility for future applications and growth. Unit last used with house vacuum system.

Complete Hot Dog Packaging Line. Consisting of Harpak Ulma Model N2500SS Fu Complete Hot Dog Packaging Line. Consisting of Harpak Ulma Model N2500SS Fu

Complete Hot Dog Packaging Line. Consisting of Harpak Ulma Model N2500SS Fu

Lot #315 (Sale Order 315 of 239)

Complete Hot Dog Packaging Line. Consisting of Harpak Ulma Model N2500SS Fully Automatic Stainless Steel Rollstock Vacuum Packaging Machine, with Koch Model PR99115220 Cross Web Labeler S/N: 1569 with Touch Screen Controls, VideoJet Excel 273Se Ink Jet Coder with Dual Heads, Gas Flush Capable, Current Die Set-up with 2-Up, 8 in. wide x 11 in. long (approx.) Die, 12 in. (approx.) Advance, 17-5/8 in. between Chains, Stainless Steel Chain, Stainless Steel Roll Holders, Guillotine Cut-off, Trim Canister, Stainless Steel CTC Touch Screen Controls, 54 in. wide x 24 ft. long Stainless Steel Frame. Warrick Hot Dog Loading System - Consisting of: Loading Hopper - 24 in. wide x 7 ft. long Belt Conveyor, with Spray Bars, Receiving Conveyor - 24 in. wide x 24 in. long Plastic Belt, Dropping to 4-Lane Conveyor - 6 in. wide to Various Lengths from 2 ft. long to 5 ft. long, Plastic Conveyors, Dropping to 4-Channel V Shaped Conveyors 34 in. long, Plastic Conveyors, Feeding onto Single Lane Conveyor, 8 in. wide x 16 ft. long Stainless Steel, Flighted Belt, Spaced 1-1/8 in. Apart, Splits to Dual Lane with Diverter 36 in. long, Rotating Finger Sorter, Return Conveyor, 6 in. wide x 9 ft. long Incline, Flighted Plastic Belt Spaced 12 in., Gear Box, Stainless Steel Electrical Panel, Related Controls. Stainless Steel Inclined Transfer Conveyor, 9 in. wide x 12 ft. long (approx.) Filighted Plastic Belt, 2 in. high Flight Spaced 12 in. apart, 9 ft. Discharge. Dies for Harpak-ULMA/Hooper, Consisting of: (1) 6 in. x 6-1/2 in. 4-Up, (1) 5 in. x 7-1/2 in. 4-Up, (1) 5 in. x 10-1/2 in. 3-Up, (1) 4 in. x 6-1/2 in. 4-Up, (1) 4 in. 13 in. 2-Up. 4-Up Top Sealing Head. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Nalbach Model NECSORT72RH Bottle Unscrambler with Bulk Feed Hopper. 72 in D Nalbach Model NECSORT72RH Bottle Unscrambler with Bulk Feed Hopper. 72 in D

Nalbach Model NECSORT72RH Bottle Unscrambler with Bulk Feed Hopper. 72 in D

Lot #316 (Sale Order 316 of 239)

Nalbach Model NECSORT72RH Bottle Unscrambler with Bulk Feed Hopper. 72 in Diameter x 22 in Deep Unscrambling Drum Inclined at a 30 Degree Angle with (2) Plexiglas Hinged Covers. 10 Inch Maximum Bottle Height. Approximate Speed of 150 CPM For a 10 Inch High Bottle to 700 CPM For a 2 Inch High Bottle. Sorts a Wide Range of Rigid Containers Shapes Including Rounds, Ovals, Squares, and Rectangulars. Easy Release Clamps and Unitized Change Parts Make Changeovers Quick and Easy. S/S  Contact Parts. 3 in W Integrated Delrin Table Top Chain Discharge Conveyor. With S/S Bulk Feed Hopper and Incline Conveyor. 70 in L x 62 in W x 40 in D S/S Hopper with 15.5 in W Flighted Vinyl Belt Conveyor with 2 in H Flights on 12 in Centers. Discharge Height Approx. 68 Inches. S/S Hinged Cover, C/S Legs. Currently Set Up for 12 oz Inverted Bottle. Includes 10 Sets of Change Parts: 44246C 25 oz BB, 44246K 12 oz Flat, 44246D 18 oz SD, 44246 10 oz OCT, 44246G 18 oz Mayo, 44246H Pastrami, 44246L 9 oz Contour, 44246E 8 oz Kraft, 44246A 9.5 oz SSG, 44246J 12 oz Inverted (installed on machine). 480 V, 3 Ph, 60 Hz.

UNUSED Pak 18 head Diving Nozzles Forced Air bottle Cleaner wtih blower pac UNUSED Pak 18 head Diving Nozzles Forced Air bottle Cleaner wtih blower pac

UNUSED Pak 18 head Diving Nozzles Forced Air bottle Cleaner wtih blower pac

Lot #320 (Sale Order 320 of 239)

UNUSED Pak 18 head Diving Nozzles Forced Air bottle Cleaner wtih blower package and control panel. 20HD electropolished bottle blower manifold with blower head, McMaster 1 HP dust collector, 18HD disc blower line distribution, 1/4in dia nozzles, 51 in L nozzle bar frame, 40 in L nozzle assembly, threaded 3/4 in dia  x 9 in H adjustable feet.

UNUSED E Pak 18 head Diving Nozzles Forced Air bottle Cleaner with blower p UNUSED E Pak 18 head Diving Nozzles Forced Air bottle Cleaner with blower p

UNUSED E Pak 18 head Diving Nozzles Forced Air bottle Cleaner with blower p

Lot #322 (Sale Order 322 of 239)

UNUSED E Pak 18 head Diving Nozzles Forced Air bottle Cleaner with blower package and control panel. 20HD electropolished bottle blower manifold with blower head, McMaster 1HP dust collector, 18HD disc blower line distribution, 1/4 in dia nozzles, 51 in L nozzle bar frame, 40 in L nozzle assembly, threaded 3/4in dia  x 9 in H adjustable feet.

Holmatic S/S Overcapper Currently Set For 603 Lids With Holmatic SM1000 Lid Holmatic S/S Overcapper Currently Set For 603 Lids With Holmatic SM1000 Lid

Holmatic S/S Overcapper Currently Set For 603 Lids With Holmatic SM1000 Lid

Lot #324 (Sale Order 324 of 239)

Holmatic S/S Overcapper Currently Set For 603 Lids With Holmatic SM1000 Lid Feeder. No Cap and No Cap In Chute Detector. Includes Holmatic Model SM1000 S/S Lid Feeder (S/N 338841). 27 3/4 in W x 60 in L Lid Holding Section 50 in L Lid Feeding Spinning Rolls, 2 3/4 in Between Rolls, 6 3/8 in Wide Cap Chute, Adjustable Dual 17 in L x 1.5 in W Side Container Carry Belts, , 80 PSI 1 CFM. .5 HP, 460V, 3 Ph, 60 Hz.

Capem Model TG415 8 Head Continuous Rotary Chuck Capper with Cap Sorter. No Capem Model TG415 8 Head Continuous Rotary Chuck Capper with Cap Sorter. No

Capem Model TG415 8 Head Continuous Rotary Chuck Capper with Cap Sorter. No

Lot #328 (Sale Order 328 of 239)

Capem Model TG415 8 Head Continuous Rotary Chuck Capper with Cap Sorter. Normal Operating Speed Approx 300 CPM, Maximum Cap Size 89 mm, Maximum Container Diameter 5 5/8 in, 15 in Diameter 8 Position Infeed and Discharge Starwheels, 2 1/4 in W S/S Cap Chute, 2 in W x 10 ft L Conveyor with S/S Frame, 22 in L Infeed Timing Screw. C/S Base with Plexiglas Enclosure. Approx 32 in Diameter Cap Sorter.

US Bottlers S/S Cap Elevator Sorter with Orientation air reject nozzle Curr US Bottlers S/S Cap Elevator Sorter with Orientation air reject nozzle Curr

US Bottlers S/S Cap Elevator Sorter with Orientation air reject nozzle Curr

Lot #330 (Sale Order 330 of 239)

US Bottlers S/S Cap Elevator Sorter with Orientation air reject nozzle Currently set for 43mm Flat and 43mm Sport Caps. 24 in W Rubber cleated Belt, 3 in on center, 22 in W x 1/2 in H cleats. S/S Hopper Dims: 48 in L x 33 in W x 24 in Deep  Orientation air reject nozzle w/ return tube back to hopper. 3/460/60.

US Bottlers 30 Head S/S Capper for 43mm Flat and 43 mm Sport caps. Capper s US Bottlers 30 Head S/S Capper for 43mm Flat and 43 mm Sport caps. Capper s

US Bottlers 30 Head S/S Capper for 43mm Flat and 43 mm Sport caps. Capper s

Lot #334 (Sale Order 334 of 239)

US Bottlers 30 Head S/S Capper for 43mm Flat and 43 mm Sport caps. Capper set to run 43mm flat caps.  Change Parts for 43mm Sport Cap include: Elevator Sorter Belt, Cap Chute, S/S Chucks. Capper has container stars and guide for round: 12, 20, 24, 32 oz. and round 500ml. 1 HP, 3/460/60 volt drive. Last running with Loeb # 73761 US Bottlers S/S Cap Elevator Sorter

Adco Model 15DEC 14 in Pitch Semi Automatic Horizontal Glue Cartoner. Carto Adco Model 15DEC 14 in Pitch Semi Automatic Horizontal Glue Cartoner. Carto

Adco Model 15DEC 14 in Pitch Semi Automatic Horizontal Glue Cartoner. Carto

Lot #338 (Sale Order 338 of 239)

Adco Model 15DEC 14 in Pitch Semi Automatic Horizontal Glue Cartoner. Carton Size Range of: 5 in - 10 in Length, 3/4 in - 2 1/2 in Width, 5 in - 10 in Depth. 4 Chain Carton Feed with 14 in Centers and S/S Lugs. Manual Load with 4 ft L Hand Load Section. Pneumatic Carton Load Pusher. Pull Down Carton Feed with Two Suction Cups and 16 in H Adjustable Carton Magazine. Wheel Type Glue Applicator with Two Glue Pots. Right to Left Configuration. C/S Crame with S/S Contact Parts. 230 V, 3 Ph, 60 Hz, 30 Amp, 6 CFM, 85 PSI.

Adco Model 15DCTEC Manual Load Horizontal Cartoner. 6 ft Long Infeed with 4 Adco Model 15DCTEC Manual Load Horizontal Cartoner. 6 ft Long Infeed with 4

Adco Model 15DCTEC Manual Load Horizontal Cartoner. 6 ft Long Infeed with 4

Lot #340 (Sale Order 340 of 239)

Adco Model 15DCTEC Manual Load Horizontal Cartoner. 6 ft Long Infeed with 48 in Load Area. Carton Specs Max: 10 in L  x 2 1/2 in  W x 10 in Deep, Carton Specs Min: 1 in L x 3/4 in W x 5 1/2 in Deep, Approx Speed 15-90 CPM Depending on Carton Size and Configuration, Nordson Series 3400 2 Nozzle Hot Melt Glue System. Last Running Size: 6 1/4 in L x 1 3/4 in W x 9 in Deep Cartons. 230/460V, 3 Ph, 60 Hz.

Kliklok Certipak Model TMII Continuous Motion Automatic Stainless Steel Wra Kliklok Certipak Model TMII Continuous Motion Automatic Stainless Steel Wra

Kliklok Certipak Model TMII Continuous Motion Automatic Stainless Steel Wra

Lot #342 (Sale Order 342 of 239)

Kliklok Certipak Model TMII Continuous Motion Automatic Stainless Steel Wrap-a-Round Multi Pack Cartoner. 12 in Pitch, Variable Speed Up To 150 Cartons Per Minute Depending on Product and Carton. Carton Blank Size Range: 4-11 Inches Long, 9-16 Inches Wide. Finished Pack Dimensions Size Range: 4-11 Inches Long, 2-5.5 Inches Wide, 1.5-3.5 Inches Deep. Production Dimensions Diameter 2-5.5 Inches Single Row or Stick Pack, 1- 2 3/4 Inches Double Row, 1.5 - 3.5 Inches Height. For Multi-Packing or Uni-Packing Low Profile Products Such as Spreads, Dips, Yogurt, Pudding Cups, Shallow Jars or Plastic Bottles. Containers Are Accepted at Random and Timed Into Flights Where a Carton Blank is Formed Around The Product Which is Then Sealed. 12 in Pitch with 7.5 in Wide Belt, 30 in L x 5 /34 in W Pre Infeed Spacing Conveyor with 1 in H Side Carry Belts, 91 in L x 6 in W Infeed Conveyor with Plastic Interlocking Chain Belt, 58 in L x 16.5 in W Carton Magazine with Advancing Belts, 1/4 HP Vacuum Pump, Nordosn Pattern Control Touch Pad, S/S Frame. 230 V, 3 P, 60 Hz.

Adco Model 12WA125WD Stainless Steel Horizontal Automatic Continuous Motion Adco Model 12WA125WD Stainless Steel Horizontal Automatic Continuous Motion

Adco Model 12WA125WD Stainless Steel Horizontal Automatic Continuous Motion

Lot #343 (Sale Order 343 of 239)

Adco Model 12WA125WD Stainless Steel Horizontal Automatic Continuous Motion Wraparound Carton Sleever. Machine Speed 25-125 CPM. 11 in Pitch with Twin Timing Screw. Right to Left Configuration, Quattro Challenger Hot Melt System with One Glue Head, Becker Vacuum Pump. 12 ft L S/S Machine Frame, 2 in W x 7 ft L Single Lane Infeed Conveyor Frame with Dual Product Indexing Screws, 2 Head Rotary Carton Feeder Set at 15.5 in Wide, 4 ft Horizontal Powered Carton Hopper, Top Hold Down Compression Belt, 2 Speed Drive Modifications with Product Back Up Detecting Photo Eyes. Last Running 2.5 in W Sleeves. 230 V, 3 Ph, 60 Hz. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Little David Model CF20T Automatic Case Erector with Bottom Tape Closure. M Little David Model CF20T Automatic Case Erector with Bottom Tape Closure. M

Little David Model CF20T Automatic Case Erector with Bottom Tape Closure. M

Lot #344 (Sale Order 344 of 239)

Little David Model CF20T Automatic Case Erector with Bottom Tape Closure. Maximum Speed up to 4 Cases Per Minute. Case Size Capacity 6 in - 16 in Length, 6 in - 12 in Width, 4 in - 12 in Height. Dekka Model 22CL 2 in Wide Tape Head. Maximum Roll Diameter 15 in. 53 in L Top Load Blanks Magazine with Adjustable Width. Single Vacuum Cup on Vertical and Box Opening Arm. Adjustable Side Rails and Top Hold Down Sled. Painted C/S Frame with Casters. 120 V, 1 Ph, 60 Hz, 7.5 SCFM/70 PSI.

Wexxar Model WFT Case Erector, capacity speed of 20 CPM, Minimum case blank Wexxar Model WFT Case Erector, capacity speed of 20 CPM, Minimum case blank

Wexxar Model WFT Case Erector, capacity speed of 20 CPM, Minimum case blank

Lot #346 (Sale Order 346 of 239)

Wexxar Model WFT Case Erector, capacity speed of 20 CPM, Minimum case blank size: 16in L x 12 in H. Maximum case blank size: 36 in L x 26.5 in H. 72 in L twin screw style magazine feed, erected case size ( with top flaps up)  8 in L x 6 in W x 9 1/2 in H min, 22 in L x 16 in W x 23 in H, 460V, 60 HZ, 3 Phase, 20 CFM (1 CFM per cycle) @ 90 PSI air requirement, pin style mechanical case opening.

Combi Model 2EZPLUS Case Erector with Bottom Case Sealer. Capable of Erecti Combi Model 2EZPLUS Case Erector with Bottom Case Sealer. Capable of Erecti

Combi Model 2EZPLUS Case Erector with Bottom Case Sealer. Capable of Erecti

Lot #348 (Sale Order 348 of 239)

Combi Model 2EZPLUS Case Erector with Bottom Case Sealer. Capable of Erecting and Sealing a Wide Range of Case Sizes and Styles Including; RSC, CSSC, AFM, FOL. Left to Right Configuration. Speed of Approx. 12 Cases Per Minute (Depending on Case Size).  3M Model 39600 Accuglide 3 in Wide Bottom Tape Head. Minimum Case Size 6 in L x 4 1/2 in W x 4 1/2 in H. Maximum Case Size 20 in L x 16 in W x 18 in H. 43 in L EZ-Load Walk In Case Magazine (Adjustable Width). 26 in W x 40 in L Hinged Fold Down Discharge Ramp. Approx. 28 in Discharge Height Coming Out of Machine. C/S Frame with Height Adjustable Casters. Vacuum Pump. 115 V, 1 Ph, 60 Hz, 20 Amp, 5.4 CFM at 80 PSI.

Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Hea Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Hea

Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Hea

Lot #350 (Sale Order 350 of 239)

Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Head  Model 39100 HST.  Erected Case Specs: Min 8 3/4 in L x 8 1/2  in W x 8 1/4  in Depth, Max 23 1/2  in L x 16 in W x 21 in Depth. Knockdown Case Specs: Min 17 1/4 in KDL x 12 1/2 in KDW x 4 1/4 in Flap, Max 39 1/2 in KDL x 29 in KDW x 8 in Flap. For case erecting and bottom sealing RSC, HSC and AFM cases. Up to 18 CPM. 48 in L x 20 in W adjustable (4) chain infeed magazine, Vacuum cup pick ups, 78 in L dual lugged chain conveyor, single top lugged chain conveyor,  3/460/60 volt, Allen and Bradley Micrologics PLC controls. C/S Frame.

Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Hea Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Hea

Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Hea

Lot #352 (Sale Order 352 of 239)

Pearson Model R23501  Automatic Case Erector with 3M Bottom 2 inch Tape Head  Model 39100 HST.  Erected Case Specs: Min 8 3/4 in L x 8 1/2  in W x 8 1/4  in Depth, Max 23 1/2  in L x 16 in W x 21 in Depth. Knockdown Case Specs: Min 17 1/4 in KDL x 12 1/2 in KDW x 4 1/4 in Flap, Max 39 1/2 in KDL x 29 in KDW x 8 in Flap. For case erecting and bottom sealing RSC, HSC and AFM cases. Up to 18 CPM. 48 in L x 20 in W adjustable (4) chain infeed magazine, Vacuum cup pick ups, 78 in L dual lugged chain conveyor, single top lugged chain conveyor,  3/460/60 volt, Allen and Bradley Micrologics PLC controls. C/S Frame.

ABC Packaging Model 230HM Case Erector. Speed Capacity of 10-30 Cases Per M ABC Packaging Model 230HM Case Erector. Speed Capacity of 10-30 Cases Per M

ABC Packaging Model 230HM Case Erector. Speed Capacity of 10-30 Cases Per M

Lot #354 (Sale Order 354 of 239)

ABC Packaging Model 230HM Case Erector. Speed Capacity of 10-30 Cases Per Minute. PLC Controlled with a Touchscreen Operator Controls, High Capacity Easy Load Case Magazine with Built In Auxiliary Magazine. Case Size Ranges: Length 7 in - 22 3/4 in, Width 5 3/4 in - 16 in, Height 3 in - 15 in. Can Be Convetred Into Tape Sealing. Provision For Hot Melt Sealing System. Push Button Operator Controls. Machine Provides a Quick, No-Tools Changeover, and Has Reduced Maintenance Due to The Continuous Motion Main Drive, Soft Start Motors, Sealed Bearings, and High Capacity PIAB Venturi System. 460 V, 3 Ph, 60 Hz.

Wexxar Model ABFT Hot Melt 20 cpm Case Erector w/ Aluminum frame. Unit has Wexxar Model ABFT Hot Melt 20 cpm Case Erector w/ Aluminum frame. Unit has

Wexxar Model ABFT Hot Melt 20 cpm Case Erector w/ Aluminum frame. Unit has

Lot #356 (Sale Order 356 of 239)

Wexxar Model ABFT Hot Melt 20 cpm Case Erector w/ Aluminum frame. Unit has no hot melt glue system. Machine Case Capabilities: Case Dims: Lay Flat Length min 16 in / max 36 in, Lay Flat Height min 12 in / max 26 1/2 in, Erected Length min 8 in / max 22 in, Erected Width min 6 in / max 16 in, Erected Depth min 9 1/2 in / max 23 in. In Current Configuration Erected Depth Maximum is 10 Inches. 480 V, 3 Ph, 60 Hz. Aluminum Frame Magazine.

Chicago Tapers  Model Duraformer 2 Case Erector and Bottom Taper, Case Rang Chicago Tapers  Model Duraformer 2 Case Erector and Bottom Taper, Case Rang

Chicago Tapers  Model Duraformer 2 Case Erector and Bottom Taper, Case Rang

Lot #358 (Sale Order 358 of 239)

Chicago Tapers  Model Duraformer 2 Case Erector and Bottom Taper, Case Range: Min 8 in L x 6 in W x 4 in H, Max 20 in L x 16 in W x 16 in H, Up to 20 CPM, 48 in L Magazine,  Dual Vacuum Suction Cups for flats, 2 in Bottom Tape Head,  with 60 in L x 3 in H Side Case Belts.  Includes Allan Bradley Panelview 300 Micro programmable controls.

WePackIt Model 720XLM Automatic Case Erector with Bottom Tape Closure. Maxi WePackIt Model 720XLM Automatic Case Erector with Bottom Tape Closure. Maxi

WePackIt Model 720XLM Automatic Case Erector with Bottom Tape Closure. Maxi

Lot #360 (Sale Order 360 of 239)

WePackIt Model 720XLM Automatic Case Erector with Bottom Tape Closure. Maximum Speed up to 14 Cases Per Minute. Case Size Range 8 in L x 6 in W x 6 in D Minimum, 20 in L x 15 in W x 17 in D Maximum. Vertical Stack Blank Magazine. Interpack Model 2000ETII 2 in W Bottom Tape Head. 48 in L x 3 in W Side Carry Belts. (4) Suction Cups For Dispensing Blanks. Allen Bradley Micro Logix 1000 PLC. Plexiglas Enclosure with (4) Doors. Painted C/S Frame. Mounted on Casters. 120 V, 1 Ph, 60 Hz.

Durable Model TGA200IQCL Automatic Case Erector with Bottom Tape Sealer. Mi Durable Model TGA200IQCL Automatic Case Erector with Bottom Tape Sealer. Mi

Durable Model TGA200IQCL Automatic Case Erector with Bottom Tape Sealer. Mi

Lot #362 (Sale Order 362 of 239)

Durable Model TGA200IQCL Automatic Case Erector with Bottom Tape Sealer. Minimum Case Size: 7 in Long x 6 in Wide x 4 in High. Maximum Case Size: 20 in Long x 16 in Wide x 16 in High. Speeds up to 20 cpm/1,200 cph, Easy Load Open Frame Tape head, A to Z Case Size Capability, Positive Case Squaring, Positive Case Feed Magazine. Case Style Versatility (RSC, HSC, CSSC, Etc) 115 V, 1 Ph, 60 Hz.

Durable Model TGA200IR Automatic Case Erector with Bottom Tape Sealer. Mini Durable Model TGA200IR Automatic Case Erector with Bottom Tape Sealer. Mini

Durable Model TGA200IR Automatic Case Erector with Bottom Tape Sealer. Mini

Lot #364 (Sale Order 364 of 239)

Durable Model TGA200IR Automatic Case Erector with Bottom Tape Sealer. Minimum Case Size: 7 in Long x 6 in Wide x 4 in High. Maximum Case Size: 20 in Long x 16 in Wide x 16 in High. Speeds up to 20 cpm/1,200 cph, Easy Load Open Frame Tape head, A to Z Case Size Capability, Positive Case Squaring, Positive Case Feed Magazine. Case Style Versatility (RSC, HSC, CSSC, Etc), Left to Right Configuration, 115 V, 1 Ph, 60 Hz.

Little David Model CF40T Case Erector with Bottom Tape Closure. Right Angle Little David Model CF40T Case Erector with Bottom Tape Closure. Right Angle

Little David Model CF40T Case Erector with Bottom Tape Closure. Right Angle

Lot #366 (Sale Order 366 of 239)

Little David Model CF40T Case Erector with Bottom Tape Closure. Right Angle Case Blank Magazine. Machine Speed up to 14 Cases Per Minute. Case Size Capacity 7-25 in Long, 6-16 in Wide, 4-16 in High. Flight Bar Speed 85 Feet Per Minute, 2 in Wide Bottom Tape Head, Maximum Tape Roll Diameter 15 in, (4) Pneumatic Vacuum Cups, (4) Station Pendant Assembly Controls. 120 V, 1 Ph, 60 Hz, 10 Amp, 80 PSI, 44 SCFM, 1/2 HP.

Loveshaw Model CF30T Case Erector and Bottom Taper. Rated to 10 CPM. Case S Loveshaw Model CF30T Case Erector and Bottom Taper. Rated to 10 CPM. Case S

Loveshaw Model CF30T Case Erector and Bottom Taper. Rated to 10 CPM. Case S

Lot #368 (Sale Order 368 of 239)

Loveshaw Model CF30T Case Erector and Bottom Taper. Rated to 10 CPM. Case Size Range: 8in-18in (L) x 6in- 15in (W) x 6in - 15in (H). Load-on-the-fly powered hopper with 95 RSC case capacity. Quick case size change overs. Allen and Bradley PLC controller. Air requirement 13 SCFM at 80 psi. Tape specifications: 1 1/2in to 2in W, 15in max tape roll diameter on 3in core, Roll length up to 2000 yards. 120 V, 60 Hz, 1 Phase, 10 Amps.

SWF Model CE151 Caseform Automatic Case Erector with Bottom Flap Sealer (se SWF Model CE151 Caseform Automatic Case Erector with Bottom Flap Sealer (se

SWF Model CE151 Caseform Automatic Case Erector with Bottom Flap Sealer (se

Lot #370 (Sale Order 370 of 239)

SWF Model CE151 Caseform Automatic Case Erector with Bottom Flap Sealer (set up for hot glue system, not included). Up to 45 Cases Per Minute Capacity, Erects RSC and HSC Style Cases, Easy Load Case Magazine, Multiple Case Size Capability, Handles Treated and Coated Corrugated Materials, Programmable Logic Controller. Case Size Ranges: Length 8 in Minimum - 26 in Maximum, Width 6 in Minimum - 14 in Maximum, Depth 5 in Minimum - 18 in Maximum. 480V, 3 Ph, 60 Hz.

Sabel Model SE15 Automatic Bottom Load Hot Melt Case Erector and Packer. Pr Sabel Model SE15 Automatic Bottom Load Hot Melt Case Erector and Packer. Pr

Sabel Model SE15 Automatic Bottom Load Hot Melt Case Erector and Packer. Pr

Lot #372 (Sale Order 372 of 239)

Sabel Model SE15 Automatic Bottom Load Hot Melt Case Erector and Packer. Production Rates Up To 15 Cases Per Minute. ~ Theory of Operation: The Lane Divider Splits The Incoming Lane Into Balanced Lanes For Collation. The Infeed Conveyor Transfers Product From Lane Divider to Case Packer. Product is Collated in the Proper Pack Pattern and Located on the Elevator For Case Loading. A Flat Case is Pulled From the Case Magazine, Opened and Positioned Above the Elevator. The Collated Product is Elevated Into the Case Through its Open Bottom. The Bottom Inner Flaps are Folded Around The Elevator Platform and the Case is Pushed Free of the Elevator. Case is Folded and Sealed with Glue. Case is Discharged. ~ 43 in L x 21 in W Low Level Case Blank Magazine with Vacuum Cups, Capable of Running RSC and HSC Style Cases. Case Size Range 12 in - 16 in Long, 6 in - 12 in Width, 6 in - 12 in Height. (2) 4 1/2 in W Container Infeeds From Lane Divider Into Collator Section. 12 in x 9 1/2 in Chamber For Product Loading in Elevator Section, 10 1/2 in x 8 1/4 in Product Elevator Platform, Approx 12 in W Case Discharge Set to 10 3/8 in W, with Adjustable Rails. Nordson Model Pro Blue 4 Hot Melt Unit with Two Nozzles For Top and Bottom Sealing (S/N SA007E38430). 18 in W x 11 ft L Plastic Interlocking Chain Infeed Conveyor with Lane Divider. 4 3/4 in W Single File Infeed Lane, Lane Divider Feeds Into (2) 4 3/4 in Discharge Lanes All with Adjustable S/S Rails, Gast 3 HP Rotary Vane Vacuum Pump. Digital Annunciator Display, 230 V, 3 Ph, 60 Hz, 80 PSIG.

Combi Model DP2000 Automatic Soft Drop Case Packer with Integrated Case Ere Combi Model DP2000 Automatic Soft Drop Case Packer with Integrated Case Ere

Combi Model DP2000 Automatic Soft Drop Case Packer with Integrated Case Ere

Lot #374 (Sale Order 374 of 239)

Combi Model DP2000 Automatic Soft Drop Case Packer with Integrated Case Erector. Left to Right Configuration. Easy Load Walk In Case Magazine. Minimum Case Size 8 1/2 in x 4 3/4 in x 4 in. Maximum Case Size 16 1/2 in x 12 1/4 in x 19 1/2 in. Maximum Speed 15 CPM. Case Discharge Height 16 in. Pack Pattern Option Available From 2 x 1 to 12 x 8. Single lane infeed with Oscillating feeder Currently Set For 3 Lanes. 15 1/2 in Total Width Delrin Table Top Chain Infeed Conveyor with (1) 3 1/4 in W Center Chain and (2) 6 in W Outer Chains. 42 in L Case Magazine with Adjustable Width (S/N 2CE119932780). 18 in L x 7 3/4 in W Case Elevator Platform, 18 in L x 9 in W Case Elevator Area. Currently Set For 3 x 4 Spray Bottle Glass Cleaner. HSC Style Cases. Doerr 1/2 HP Vacuum Pump. Allen Bradley SLC 5/04 CPU. 240 V, 3 Ph, 60 Hz.

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T

Lot #376 (Sale Order 376 of 239)

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The intended use of the AccuGlide II STD 2 Inch Upper and Lower Taping Heads is to apply a C clip of Scotch brand pressure sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping heads are incorporated into most standard 3M Matic case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M Matic case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines. The AccuGlide II STD Taping Heads have been designed and tested for use with Scotch brand pressure sensitive film box sealing tape. Case Size Capacity: Length: 6 in Minimum – Unlimited Maximum, Width: 6 in Minimum – Unlimited Maximum, Height: 4.75 in Minimum – Unlimited Maximum. Operating Rate Conveyor Speeds up to 80 Feet Per Minute.  Tape Roll Diameter: Up to 16 in Maximum on a 3 in Diameter Core. (Accommodates all system roll lengths of Scotch brand film tapes.) For use with center seam regular slotted containers.

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T

Lot #378 (Sale Order 378 of 239)

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The intended use of the AccuGlide II STD 2 Inch Upper and Lower Taping Heads is to apply a C clip of Scotch brand pressure sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping heads are incorporated into most standard 3M Matic case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M Matic case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines. The AccuGlide II STD Taping Heads have been designed and tested for use with Scotch brand pressure sensitive film box sealing tape. Case Size Capacity: Length: 6 in Minimum – Unlimited Maximum, Width: 6 in Minimum – Unlimited Maximum, Height: 4.75 in Minimum – Unlimited Maximum. Operating Rate Conveyor Speeds up to 80 Feet Per Minute.  Tape Roll Diameter: Up to 16 in Maximum on a 3 in Diameter Core. (Accommodates all system roll lengths of Scotch brand film tapes.) For use with center seam regular slotted containers.

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  T

Lot #380 (Sale Order 380 of 239)

UNUSED 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The intended use of the AccuGlide II STD 2 Inch Upper and Lower Taping Heads is to apply a C clip of Scotch brand pressure sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping heads are incorporated into most standard 3M Matic case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M Matic case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines. The AccuGlide II STD Taping Heads have been designed and tested for use with Scotch brand pressure sensitive film box sealing tape. Case Size Capacity: Length: 6 in Minimum – Unlimited Maximum, Width: 6 in Minimum – Unlimited Maximum, Height: 4.75 in Minimum – Unlimited Maximum. Operating Rate Conveyor Speeds up to 80 Feet Per Minute.  Tape Roll Diameter: Up to 16 in Maximum on a 3 in Diameter Core. (Accommodates all system roll lengths of Scotch brand film tapes.) For use with center seam regular slotted containers.

3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The inte 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The inte

3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The inte

Lot #382 (Sale Order 382 of 239)

3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The intended use of the AccuGlide II STD 2 Inch Upper and Lower Taping Heads is to apply a C clip of Scotch brand pressure sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping heads are incorporated into most standard 3M Matic case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M Matic case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines. The AccuGlide II STD Taping Heads have been designed and tested for use with Scotch brand pressure sensitive film box sealing tape. Case Size Capacity: Length: 6 in Minimum – Unlimited Maximum, Width: 6 in Minimum – Unlimited Maximum, Height: 4.75 in Minimum – Unlimited Maximum. Operating Rate Conveyor Speeds up to 80 Feet Per Minute.  Tape Roll Diameter: Up to 16 in Maximum on a 3 in Diameter Core. (Accommodates all system roll lengths of Scotch brand film tapes.) For use with center seam regular slotted containers.

3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The inte 3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The inte

3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The inte

Lot #384 (Sale Order 384 of 239)

3M Accuglide II Type 39600 2 in Wide Case Sealer Upper Tape Head.  The intended use of the AccuGlide II STD 2 Inch Upper and Lower Taping Heads is to apply a C clip of Scotch brand pressure sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping heads are incorporated into most standard 3M Matic case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M Matic case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines. The AccuGlide II STD Taping Heads have been designed and tested for use with Scotch brand pressure sensitive film box sealing tape. Case Size Capacity: Length: 6 in Minimum – Unlimited Maximum, Width: 6 in Minimum – Unlimited Maximum, Height: 4.75 in Minimum – Unlimited Maximum. Operating Rate Conveyor Speeds up to 80 Feet Per Minute.  Tape Roll Diameter: Up to 16 in Maximum on a 3 in Diameter Core. (Accommodates all system roll lengths of Scotch brand film tapes.) For use with center seam regular slotted containers.

3M Accuglide HST Type 29100 3 in Wide Case Sealer Lower Tape Head.  The int 3M Accuglide HST Type 29100 3 in Wide Case Sealer Lower Tape Head.  The int

3M Accuglide HST Type 29100 3 in Wide Case Sealer Lower Tape Head.  The int

Lot #386 (Sale Order 386 of 239)

3M Accuglide HST Type 29100 3 in Wide Case Sealer Lower Tape Head.  The intended use of the AccuGlide HST 3 Inch Upper and Lower Taping Heads is to apply a C clip of Scotch brand pressure sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping heads are incorporated into most standard 3M Matic case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M Matic case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines. The AccuGlide HST Taping Heads have been designed and tested for use with Scotch brand pressure sensitive film box sealing tape. Case Size Capacity: Length: 6 in Minimum – Unlimited Maximum, Width: 5 in Minimum – Unlimited Maximum, Height: 4 in Minimum – Unlimited Maximum. Operating Rate Conveyor Speeds up to 150 Feet Per Minute.  Tape Roll Diameter: Up to 15 in Maximum on a 3 in Diameter Core (position A) and Up to 18 in Maximum on a 3 in Diameter Core (position B). (Accommodates all system roll lengths of Scotch brand film tapes.) For use with center seam regular slotted containers.

UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length

UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length

Lot #388 (Sale Order 388 of 239)

UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length 2.325 in to 2.75 in L. Runs up to 80 to 120 FPM. The Dekka 23 is the standard Dekka tape head. Eighty percent of production lines are mid-speed applications that require a tape head of this kind, durable and consistent. Dekka 23 tape heads are precision constructed in high quality stainless steel using modern laser cutting technology and are highly finished for appearance and corrosion resistance. Easy To Load With Dekkas open side frame design, tape loading is simple and easy. Loading can be done in 30 seconds or less without removing the tape head or taking the machine out of adjustment, which reduces down time and costly production delays. Exclusive No Break Tape Advance In conventional tape heads, feed rolls pull tape along its edges where breaks actually occur. Dekkas exclusive No Break Tape system advances the tape along its centerline, avoiding edge stress and helping to prevent tape breaks. This system eliminates delays and lost production. External Tape Guide System Dekkas external tape guide physically holds tape ends in place unaffected by external drafts or loss of static attraction to the wipe down roller. The guide remains free from troublesome adhesive build-up. Whether taping case tops or bottoms, Dekka tape heads reliably seal case after case, avoiding costly reprocessing of untaped cases. Easily Adjustable Roller Tension Spring The main spring tension may be adjusted by selecting one of four preset leverage points. Adjustments are unaffected by vibration and shock. High Quality Molded Wipe Down Rollers Many tape heads are fitted with separate roller sleeves, requiring frequent replacements due to surface breaks and splits. Dekkas polyurethane wipe down rollers are molded in one piece. The result is tougher, longer lasting rollers requiring less maintenance.

UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length

UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length

Lot #390 (Sale Order 390 of 239)

UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length 2.325 in to 2.75 in L. Runs up to 80 to 120 FPM. The Dekka 23 is the standard Dekka tape head. Eighty percent of production lines are mid-speed applications that require a tape head of this kind, durable and consistent. Dekka 23 tape heads are precision constructed in high quality stainless steel using modern laser cutting technology and are highly finished for appearance and corrosion resistance. Easy To Load With Dekkas open side frame design, tape loading is simple and easy. Loading can be done in 30 seconds or less without removing the tape head or taking the machine out of adjustment, which reduces down time and costly production delays. Exclusive No Break Tape Advance In conventional tape heads, feed rolls pull tape along its edges where breaks actually occur. Dekkas exclusive No Break Tape system advances the tape along its centerline, avoiding edge stress and helping to prevent tape breaks. This system eliminates delays and lost production. External Tape Guide System Dekkas external tape guide physically holds tape ends in place unaffected by external drafts or loss of static attraction to the wipe down roller. The guide remains free from troublesome adhesive build-up. Whether taping case tops or bottoms, Dekka tape heads reliably seal case after case, avoiding costly reprocessing of untaped cases. Easily Adjustable Roller Tension Spring The main spring tension may be adjusted by selecting one of four preset leverage points. Adjustments are unaffected by vibration and shock. High Quality Molded Wipe Down Rollers Many tape heads are fitted with separate roller sleeves, requiring frequent replacements due to surface breaks and splits. Dekkas polyurethane wipe down rollers are molded in one piece. The result is tougher, longer lasting rollers requiring less maintenance.

Dual Sided Semi Automatic Pneumatically Operated Sheet Pan Portion Cutter. Dual Sided Semi Automatic Pneumatically Operated Sheet Pan Portion Cutter.

Dual Sided Semi Automatic Pneumatically Operated Sheet Pan Portion Cutter.

Lot #392 (Sale Order 392 of 239)

Dual Sided Semi Automatic Pneumatically Operated Sheet Pan Portion Cutter. Single Cutter in Center with Sliding Trays Entering From Each End. Cuts (10) 6 in x 4 in (approx.) Portions Per Pan Per Cycle. Has (10) 5 7/8 in x 3 3/4 in Hold Down Blocks to Steady Product While Cutting. 20 in L x 12 1/4 in W Overall Dimensions of Cutter Mechanism. 24 1/4 in L x 15 3/4 in W Nylon Table Tops with Rubber Covers on Each End. Mead Fluid Dynamics Model CSV102 Two Hand Actuators on Each End. Plexiglas Enclosure with Hinged Doors. S/S Frame with Casters.

Bongard Marchand Concorde 2 Round Bowl Divider, Capacity: Min 3 kg, Max 16 Bongard Marchand Concorde 2 Round Bowl Divider, Capacity: Min 3 kg, Max 16

Bongard Marchand Concorde 2 Round Bowl Divider, Capacity: Min 3 kg, Max 16

Lot #394 (Sale Order 394 of 239)

Bongard Marchand Concorde 2 Round Bowl Divider, Capacity: Min 3 kg, Max 16 kg, Output: 1,200 PPH.  Bowl Dimenstions: 19 1/2 in dia x 5 in deep w/ S/S sides, Lid with non stick underside lockable with drop forged cam, (20) divisions, double acting hydraulic system, (4) castors. 230 V, 3 Ph, 60 Hz.

Pizzamatic S/S Waterfall Type Cheese and Topping Applicator with Banjo Belt Pizzamatic S/S Waterfall Type Cheese and Topping Applicator with Banjo Belt

Pizzamatic S/S Waterfall Type Cheese and Topping Applicator with Banjo Belt

Lot #396 (Sale Order 396 of 239)

Pizzamatic S/S Waterfall Type Cheese and Topping Applicator with Banjo Belt Conveyor. 24 in W x 48 in L Pass Through Area with 13.5 in W Banjo Belt Conveyor, 15.5 in W x 14.5 in D Topping Feed Hopper, 17 3/4 in W x 30 in L Conveyor Underneath Topping Hopper, (8) 15 in W S/S Rakes For Applying Topping, 18.5 in W S/S Excess Product Catch Chute. 240 V, 3 Ph, 60 Hz.

Tosei Kogyo Model A16NP Automatic Pierogi/Gyoza Forming and Filling Machine Tosei Kogyo Model A16NP Automatic Pierogi/Gyoza Forming and Filling Machine

Tosei Kogyo Model A16NP Automatic Pierogi/Gyoza Forming and Filling Machine

Lot #398 (Sale Order 398 of 239)

Tosei Kogyo Model A16NP Automatic Pierogi/Gyoza Forming and Filling Machine. Maximum Capacity Approx 10,000 Pieces Per Hour. Includes Final Stage Dough Roller with 9 in W x 9 in L Infeed Belt with Above Belt Flour Sifter. 9 1/4 in W x 31 in Total Length Discharge Belt From Dough Roller Feeding into Former Infeed Chute. (2) Station Pierogi Former Set For 3 3/4 in x 3 in Ovals with Reverse Flow Scrap Dough Discharge Conveyor. (8) Station Turn Table with Two Forming Cups Per Station. (2) Head Piston Filler with 18 in Diameter x 21 in Deep Cone Shaped Feed Hopper with Agitator. After Filling, Pierogis are Folded, Closed and Discharged From Turntable Onto 8 1/4 in W Vinyl Belt and Then Onto 8 3/4 in W x 24 1/2 in L S/S Chute Two Pieces at a Time. All S/S Frame with Plexiglas Enclosure and Casters. Includes Additional Model A-16NP Final Dough Sheeter Roller Assembly, (1) Extra Set Rollers, (1) Piston Filler Assembly.

Feldenauer Model 75 Stainless Steel Rotating Dip Tank. 6 ft Long x 5 ft Dee Feldenauer Model 75 Stainless Steel Rotating Dip Tank. 6 ft Long x 5 ft Dee

Feldenauer Model 75 Stainless Steel Rotating Dip Tank. 6 ft Long x 5 ft Dee

Lot #399 (Sale Order 399 of 239)

Feldenauer Model 75 Stainless Steel Rotating Dip Tank. 6 ft Long x 5 ft Deep with Pump and Controls. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Rietz Model TL46K2220 46 in Dia x 21 ft L S/S Blancher. 47 in Wide Trough, Rietz Model TL46K2220 46 in Dia x 21 ft L S/S Blancher. 47 in Wide Trough,

Rietz Model TL46K2220 46 in Dia x 21 ft L S/S Blancher. 47 in Wide Trough,

Lot #400 (Sale Order 400 of 239)

Rietz Model TL46K2220 46 in Dia x 21 ft L S/S Blancher. 47 in Wide Trough, Approx 16 in Diameter Shaft, (5) 43 in W Stainless Steel Hinged Covers, 3 HP S/S Centrifugal Recirculation Pump, 30 in Wide Discharge Chute with Dewatering Screen, 45 in Discharge Height, (20) 4 in Diameter Bottom Steam Injection Ports, Chain Drive, 4.4 HP Input Drive Through Gear Reducer with 3 HP Motor, S/S Operator Platform with Ladder, 1.5 in Diameter Galvanized Steel Water Pipe.

Fulton Model ICS010A Gas Fired Steam Skid Mounted Boiler. 24 Gallons Water Fulton Model ICS010A Gas Fired Steam Skid Mounted Boiler. 24 Gallons Water

Fulton Model ICS010A Gas Fired Steam Skid Mounted Boiler. 24 Gallons Water

Lot #402 (Sale Order 402 of 239)

Fulton Model ICS010A Gas Fired Steam Skid Mounted Boiler. 24 Gallons Water Content Capacity. 335,000 BTU Per Hour Output. 345 Pounds Per Hour Steam Output. 150 PSI Maximum Working Pressure. Approx. 420 Cu Ft Per Hour Natural Gas Consumption. Approx. 170 Cu Ft Per Hour Propane Gas Consumption. National Board# 73765. 420,000 BTU Per Hour Maximum Firing Rate Input. 1/3 HP Burner Motor, 1/60/115/230. Skid Mounted Boiler Return System. 30 Gallon Model HY10 Condensate Holding Tank (S/N 40377), 18 in Diameter x 30 in L 1 /2 HP C/S Centrifugal Pump.

Lot - (63) Elevator Buckets Including: (43) Meyer Model 52-C-12 Plastic Sin Lot - (63) Elevator Buckets Including: (43) Meyer Model 52-C-12 Plastic Sin

Lot - (63) Elevator Buckets Including: (43) Meyer Model 52-C-12 Plastic Sin

Lot #404 (Sale Order 404 of 239)

Lot - (63) Elevator Buckets Including: (43) Meyer Model 52-C-12 Plastic Single Compartment Bucket Elevator Buckets, 12 in. x 4-3/4 in. x 2-1/4 in. Deep (New Cost is $37.90 Each), (20) Meyer Model 62-S-12 2-Compartment Plastic Bucket Elevator Buckets, 12 in. x 5-1/2 in. x 3 in. Deep Overall Size, 5-7/8 in Wide Twin Compartments. (New Cost is $46.40 Each)

Lot - (84) Elevator Buckets Including: (67) Meyer Model 62-S-15 Plastic Sin Lot - (84) Elevator Buckets Including: (67) Meyer Model 62-S-15 Plastic Sin

Lot - (84) Elevator Buckets Including: (67) Meyer Model 62-S-15 Plastic Sin

Lot #408 (Sale Order 408 of 239)

Lot - (84) Elevator Buckets Including: (67) Meyer Model 62-S-15 Plastic Single Compartment Bucket Elevator Buckets, 15 in. x 5-5/8 in. x 3 in. Deep (New Cost is $48.08 Each) and (17) Meyer Model 62-S-18 Plastic Single Compartment Bucket Elevator Buckets, 18 in. x 5-1/2 in. x 3 in. Deep. (New Cost is $53.68 Each)

Lot - (111) Meyer Model 62-C-24 2-Compartment Plastic Bucket Elevator Bucke Lot - (111) Meyer Model 62-C-24 2-Compartment Plastic Bucket Elevator Bucke

Lot - (111) Meyer Model 62-C-24 2-Compartment Plastic Bucket Elevator Bucke

Lot #410 (Sale Order 410 of 239)

Lot - (111) Meyer Model 62-C-24 2-Compartment Plastic Bucket Elevator Buckets, 24 in. x 5-3/4 in. x 2-3/4 in. Deep Overall Size. 17-7/8 in. Wide and 6 in. Wide Compartments (New Cost is $66.89 Each)

Lot - (352) Meyer Model 62-S-12 Plastic Single Compartment Bucket Elevator Lot - (352) Meyer Model 62-S-12 Plastic Single Compartment Bucket Elevator

Lot - (352) Meyer Model 62-S-12 Plastic Single Compartment Bucket Elevator

Lot #412 (Sale Order 412 of 239)

Lot - (352) Meyer Model 62-S-12 Plastic Single Compartment Bucket Elevator Buckets, 12 in. x 5-1/2 in. x 3 in. Deep (New Cost is $46.60 Each)

Lot - Assorted Elevator Buckets in (3) Totes Lot - Assorted Elevator Buckets in (3) Totes

Lot - Assorted Elevator Buckets in (3) Totes

Lot #414 (Sale Order 414 of 239)

Lot - Assorted Elevator Buckets in (3) Totes

Frisse (Buhler) 420mm Wide Mdl UZM4/21 Chocolate Enrober, 17 in W S/S jacke Frisse (Buhler) 420mm Wide Mdl UZM4/21 Chocolate Enrober, 17 in W S/S jacke

Frisse (Buhler) 420mm Wide Mdl UZM4/21 Chocolate Enrober, 17 in W S/S jacke

Lot #416 (Sale Order 416 of 239)

Frisse (Buhler) 420mm Wide Mdl UZM4/21 Chocolate Enrober, 17 in W S/S jacketed core upper roller, 16 1/2 in x 74 in L Wire mesh belt, 1.5 kw Chocolate pump, S/S frame and enclosure w/ hinged access doors all sides, (2) Water pumps, Top mounted fan for air circulation w/ 17 in W s/s nozzle, control panel w/ (3) temp guages, LED conveyor speed readout, 3 ph 480 volt

Aasted Model  DMW1000 1,000 Kg Per Hour Self Contained Tempering Unit with Aasted Model  DMW1000 1,000 Kg Per Hour Self Contained Tempering Unit with

Aasted Model  DMW1000 1,000 Kg Per Hour Self Contained Tempering Unit with

Lot #418 (Sale Order 418 of 239)

Aasted Model  DMW1000 1,000 Kg Per Hour Self Contained Tempering Unit with 53 in L x 10 in Diameter Shell and Tube Heat Exchanger. Gives a Consistent Supply of Chocolate For Enrobing, Moulding or Other Purposes. (5) Omron Digital Temperature Controlers, 2.5 in Diameter Inlet and Outlet. Heat Exchanger Design Pressure on Shell and Tube Side 6 bar, Design Temp on Shell and Tube Side 100 GRL, Maximum Water Flow 5.5 Square Meters Per Hour, Shell Volume 45 L, Tube Volume 20 L, 3 in Diameter Flanged Inlet and Outlet. All Related Piping, Valves, Etc.

Klenzade S/S Single Tank CIP System with 23.5 in x 23.5 in x 28.5 in S/S Si Klenzade S/S Single Tank CIP System with 23.5 in x 23.5 in x 28.5 in S/S Si

Klenzade S/S Single Tank CIP System with 23.5 in x 23.5 in x 28.5 in S/S Si

Lot #420 (Sale Order 420 of 239)

Klenzade S/S Single Tank CIP System with 23.5 in x 23.5 in x 28.5 in S/S Single Wall Tank. Ampco Model 2 1/2 x 2 DC2 10 HP S/S Centrifugal Pump with 6 1/8 in Diameter Impellar, 21/2 in DiameterTri-Clamp Inlet, 2 in Diameter Tri-Clamp Outlet, 3,500 RPM (S/N CC3102110). 5 ft L x 8.5 in Diameter S/S Shell and Tube Heat Exchanger, Maximum Working Pressure 150 PSI at 375 Degrees F, S/N 1642, NB Number 739. Partlow Model MRC7000 Chart Recorder. (4) 2.5 in Waukesha S/S Valves. (1) 2 in Waukesha S/S Valve. Mounted on Common S/S Frame. 10 HP, 230/460 V (Wired 460V), 3 Ph, 60 Hz.

122 in L x 20.5 in W x 17 in D S/S COP Tank. (1) 2 in Diameter by 14 1/2 in 122 in L x 20.5 in W x 17 in D S/S COP Tank. (1) 2 in Diameter by 14 1/2 in

122 in L x 20.5 in W x 17 in D S/S COP Tank. (1) 2 in Diameter by 14 1/2 in

Lot #422 (Sale Order 422 of 239)

122 in L x 20.5 in W x 17 in D S/S COP Tank. (1) 2 in Diameter by 14 1/2 in Long Overflow Pipe, (2) 3 in Tri-Clamp Inlets, (1) 3 in Tri-Clamp Outlet, 12 1/2 Discharge Height with (6) 19 3/4 in S/S Pipe Legs.

Domino Model DDC3 S/S Digital Laser Coder. sealed CO2 RF Excited Type Laser Domino Model DDC3 S/S Digital Laser Coder. sealed CO2 RF Excited Type Laser

Domino Model DDC3 S/S Digital Laser Coder. sealed CO2 RF Excited Type Laser

Lot #424 (Sale Order 424 of 239)

Domino Model DDC3 S/S Digital Laser Coder. sealed CO2 RF Excited Type Laser, Video User Interface with Intergrated Control Panel, Up to Two Lines Per Head, Up to 2,000 Characters Per Second (Single Line) or 4,000 Characters Per Second (Twin Line), Up to 3,300/6,600 Charcters Per Second with LEEP Laser Tubes, 820 Feet Per Minute Line Speed or 1,310 Feet Per Minute with LEEP Lasers, 5x5, 7x5, 7x9, PC Font, Arabic Font Print Formats, Up to 253 Characters Message Length, Air Cooled Laser head. 100-240 V, 60 Hz.

Videojet Model Focus S1000 Laser Coder with Handheld Control Terminal. Capa Videojet Model Focus S1000 Laser Coder with Handheld Control Terminal. Capa

Videojet Model Focus S1000 Laser Coder with Handheld Control Terminal. Capa

Lot #426 (Sale Order 426 of 239)

Videojet Model Focus S1000 Laser Coder with Handheld Control Terminal. Capable of Storing Up To 20 Messages with 1, 2 or 3 Lines of 100 Characters Per Line, CO2 Type Laser Tube, Class IV, 10.6 um Wavelength, Air Cooled, Instrument Quality Filtered to .03 nicrons No More Than 1 PPM Oil Content and 99% Water Free, 2.5 Inch, 5 Inch and 10 Inch Focal Length, Handheld Terminal with 40 Key Tactile Membrane Keypad. Includes Fumex Model FA2 High Suction Fume Extractor. Centrifugal Direct Drive Continuous Duty Blower. Pleated Panel Filter, 85% ASHRAE Rated HEPA Filter, 99.97% Efficient, 10 Pound Activated Carbon Cell, S/S Cabinet with Casters. 120/230 V, 1 Ph, 60 Hz.

Ingersol Rand Model UP675125 7.5 HP Single Stage Tank Mounted Rotary Screw Ingersol Rand Model UP675125 7.5 HP Single Stage Tank Mounted Rotary Screw

Ingersol Rand Model UP675125 7.5 HP Single Stage Tank Mounted Rotary Screw

Lot #428 (Sale Order 428 of 239)

Ingersol Rand Model UP675125 7.5 HP Single Stage Tank Mounted Rotary Screw Air Compressor with Dri Aire Model DA35 Compressed Refrigerated Air Dryer. Ingersol Rand Model UP675125 Aire Compressor, 125 PSIG Maximum Operating Pressure, 3,200 RPM Pump Speed, Air Cooled. 80 Gallon C/S Tank with Maximum Working Pressure 225 PSI at 650 Degrees F, National Board # 1051740. 460 V, 3 Ph, 60 Hz. Dri Aire Model DA35 Compressed Refrigerated Air Dryer (S/N 7481071307TAF. 134A Type Refrigerant at 13 Ounces, 7.2 RLA, 32.7 LRA. 115 V, 1 Ph, 60 Hz.

Quincy QT Series Model 271CS80VCB 7.5 HP Vertical Tank Mounted Reciprocatin Quincy QT Series Model 271CS80VCB 7.5 HP Vertical Tank Mounted Reciprocatin

Quincy QT Series Model 271CS80VCB 7.5 HP Vertical Tank Mounted Reciprocatin

Lot #430 (Sale Order 430 of 239)

Quincy QT Series Model 271CS80VCB 7.5 HP Vertical Tank Mounted Reciprocating Air Compressor. Two Stage, 80 Gallon Vertical Receiving Tank. 22.6 CFM at 175 PSI. Compressor ROM 1034. Motor RPM 1750. Maximum Working Pressure 175 PSI. 4.5 in Bore LP. 2.5 in Bore HP. 3 in Stroke. (2) Cylinders, 500 Minimum RPM. 1080 Maximum RPM. 230 V, 1 Ph, 60 Hz.

Key Model 6021871 Prism Monochromatic Optical Color Sorter with Controls. T Key Model 6021871 Prism Monochromatic Optical Color Sorter with Controls. T

Key Model 6021871 Prism Monochromatic Optical Color Sorter with Controls. T

Lot #431 (Sale Order 431 of 239)

Key Model 6021871 Prism Monochromatic Optical Color Sorter with Controls. Throughput Speed Approx 20,000 - 25,000 Pounds Per Hour (Diced Potatoes). 51 in Wide Conveyor, (4) Monochromatic Camera Vision System, Inspection Lighting System, Cool Water Vision and Lighting Module Cooling System with Heat Exchangers Requiring Water at 40-75 PSIG at a Temperature of 55-70 Degrees F, Air Conditioner Control Module Cooling System, Ejector Module with Approx 128 Ejector Valves, Belt Speed Approx 500 FPM, 9.5 in W x 80 in L Discharge Conveyor. Air Supply 90-120 PSIG, 230 V, 3 Ph, 60 Hz. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble

JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble

Lot #432 (Sale Order 432 of 239)

JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble Chiller Cook Tank. Maximum Capacity 60 Gallons of Pumpable Product, 300 Pounds or Meat. 41 in L x 29 in Diameter S/S Perforated Product Cylinder with Latching Door. Selector Switch For Timed or Meat Probe Operation. Digital Temperature Controls. Partlow Model MRC8000 Chart Recorder. Shell and Tube Heat Exchanger. Circulating Pump. Steam Jacket  Maximum Working Pressure 50 PSI at 298 Degrees F. Minimum Design Metal Temperature -20 Degrees F at 50 PSI. National Board Number 2882. 208 V, 3 Ph, 60 Hz.

JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble

JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble

Lot #434 (Sale Order 434 of 239)

JC Pardo Cleveland Model PTCCT60 S/S Jacketed Horizontal Combination Tumble Chiller Cook Tank. Maximum Capacity 60 Gallons of Pumpable Product, 300 Pounds or Meat. 41 in L x 29 in Diameter S/S Perforated Product Cylinder with Latching Door. Selector Switch For Timed or Meat Probe Operation. Digital Temperature Controls. Partlow Model MRC8000 Chart Recorder. Shell and Tube Heat Exchanger. Circulating Pump. Steam Jacket  Maximum Working Pressure 50 PSI at 298 Degrees F. Minimum Design Metal Temperature -20 Degrees F at 50 PSI. National Board Number 2875. 208 V, 3 Ph, 60 Hz.

10 in W x 76 in H Hydraulic Powered Incline Conveyor. 10 in W Flighted Plas 10 in W x 76 in H Hydraulic Powered Incline Conveyor. 10 in W Flighted Plas

10 in W x 76 in H Hydraulic Powered Incline Conveyor. 10 in W Flighted Plas

Lot #436 (Sale Order 436 of 239)

10 in W x 76 in H Hydraulic Powered Incline Conveyor. 10 in W Flighted Plastic Interlocking Chain Conveyor. 3/4 in H Flights on 25 in Centers. 29 in H at Bottom, 76 in H at Top. S/S Frame with Casters. Height Adjustable Rear Legs.

Ross Industries Model VSC68, 6 in W x 95 in L Powered Vinyl Flat Belt Conve Ross Industries Model VSC68, 6 in W x 95 in L Powered Vinyl Flat Belt Conve

Ross Industries Model VSC68, 6 in W x 95 in L Powered Vinyl Flat Belt Conve

Lot #440 (Sale Order 440 of 239)

Ross Industries Model VSC68, 6 in W x 95 in L Powered Vinyl Flat Belt Conveyor. Variable Speed Drive. Belt Height 43 in. 7 in Diameter S/S Over Belt Duster. S/S Frame and Legs. Mounted on Casters For Portability. 1/4 HP Drive. 120 V, 1 Ph, 60 Hz,4 Amp.

Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conve Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conve

Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conve

Lot #442 (Sale Order 442 of 239)

Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conveyor. Variable Speed Drive. Belt Height 44 in. 7 in Diameter S/S Over Belt Duster. S/S Frame and Legs. Mounted on Casters For Portability. 1/4 HP Drive. 120 V, 1 Ph, 60 Hz,4 Amp.

Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conve Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conve

Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conve

Lot #444 (Sale Order 444 of 239)

Ross Industries Model VSC66, 6 in W x 75 in L Powered Vinyl Flat Belt Conveyor. Variable Speed Drive. Belt Height 43 in. S/S Frame and Legs. Mounted on Casters For Portability. 1/4 HP Drive. 120 V, 1 Ph, 60 Hz,4 Amp.

Arrowhead 4 1/2 in W Variable Speed 180 Turn Conveyor. 4 1/2 in Wide Delrin Arrowhead 4 1/2 in W Variable Speed 180 Turn Conveyor. 4 1/2 in Wide Delrin

Arrowhead 4 1/2 in W Variable Speed 180 Turn Conveyor. 4 1/2 in Wide Delrin

Lot #446 (Sale Order 446 of 239)

Arrowhead 4 1/2 in W Variable Speed 180 Turn Conveyor. 4 1/2 in Wide Delrin Table Top Chain, KB Genesis Variable Speed Drive Controls. 86 in Approximate Overall Width. 72 in Width from Center of Belt on Left End, to Center of Belt on Right End. S/S Frame with Height Adjustable Leveling Feet. 230 V, 3 Ph, 60 Hz.

Kofab Model P100560 24.75 in W Compression Conveyor with Top and Bottom Bel Kofab Model P100560 24.75 in W Compression Conveyor with Top and Bottom Bel

Kofab Model P100560 24.75 in W Compression Conveyor with Top and Bottom Bel

Lot #448 (Sale Order 448 of 239)

Kofab Model P100560 24.75 in W Compression Conveyor with Top and Bottom Belts. 24.75 in W x 71 in L Top and Bottom Vinyl Conveyor Belts, Raising and Lowering Actuator to Lower Top Belt Onto Bottom Belt, Belt Speed Approx 5.5 Feet Per Minute, (4) Action Jac Model 72440100 Screw Jacks, Bottom Belt Has (24) 2 in Diameter Rollers Underneath Belt, Top Belt Has (22) 2 in Diameter Rollers Underneath Belt, Top Belt Has 24 in L Section With Manual Height/Compression Adjustment on Infeed End, Manual Belt Tension Levers, 3/4 HP Belt Drives, S/S Frame with (4) Casters. 460 V, 3 Ph, 60 Hz.

Tandem 4 1/2 in W x 43 in L Delrin Tabletop Chain Infeed Conveyor and 4 1/2 Tandem 4 1/2 in W x 43 in L Delrin Tabletop Chain Infeed Conveyor and 4 1/2

Tandem 4 1/2 in W x 43 in L Delrin Tabletop Chain Infeed Conveyor and 4 1/2

Lot #450 (Sale Order 450 of 239)

Tandem 4 1/2 in W x 43 in L Delrin Tabletop Chain Infeed Conveyor and 4 1/2 in W x 39 in L Delrin Tabletop Chain Discharge Conveyor with Common Drive Shaft and Variable Speed Control. S/S Frames and Legs. 110 V, 1 Ph, 60 Hz.

Arrowhead 4.5 in W x 64 in L Delrin Table Top Chain Powered Conveyor with S Arrowhead 4.5 in W x 64 in L Delrin Table Top Chain Powered Conveyor with S

Arrowhead 4.5 in W x 64 in L Delrin Table Top Chain Powered Conveyor with S

Lot #452 (Sale Order 452 of 239)

Arrowhead 4.5 in W x 64 in L Delrin Table Top Chain Powered Conveyor with S/S Frame. Reliance 1/2 HP Drive Motor. Sprocket Driven with 28 Tooth Driven Sprocket and 16 Tooth Driven Sprocket. Provisions For Adjustable Guide Rails. 230/460 V, 3 Ph, 60 Hz, 1725 RPM.

AC Horn Model ACH8024 S/S Frame Rubber Belt Sanitary Scoop Incline Conveyor AC Horn Model ACH8024 S/S Frame Rubber Belt Sanitary Scoop Incline Conveyor

AC Horn Model ACH8024 S/S Frame Rubber Belt Sanitary Scoop Incline Conveyor

Lot #454 (Sale Order 454 of 239)

AC Horn Model ACH8024 S/S Frame Rubber Belt Sanitary Scoop Incline Conveyor with Approx 19 ft Discharge Height. Belt Approx 62 ft L x 24 in W. Scoops Approx. 6 in L with 2 in Indent and 8 Inch Centers.

4 1/2 in W Delrin Chain Lugged Incline Conveyor Belt for Bulk Boxes. S/S Fr 4 1/2 in W Delrin Chain Lugged Incline Conveyor Belt for Bulk Boxes. S/S Fr

4 1/2 in W Delrin Chain Lugged Incline Conveyor Belt for Bulk Boxes. S/S Fr

Lot #456 (Sale Order 456 of 239)

4 1/2 in W Delrin Chain Lugged Incline Conveyor Belt for Bulk Boxes. S/S Frame and Guide Rails, 125 in Approx Discharge Height. 37 1/2 in Spacing Between Lugs, 36 in L Infeed Section, 8 ft L Incline Section, 32 in L Top Discharge Section, With 36 in L S/S Roller Pre-Infeed, OAD 126 in L x 24 in W x 141 in H. (Not Free Standing).

Advanced Food Systems Model SA06 and WBC20 Incline and Suspended Weigh Belt Advanced Food Systems Model SA06 and WBC20 Incline and Suspended Weigh Belt

Advanced Food Systems Model SA06 and WBC20 Incline and Suspended Weigh Belt

Lot #458 (Sale Order 458 of 239)

Advanced Food Systems Model SA06 and WBC20 Incline and Suspended Weigh Belt Conveyor System Including: Model SA06 S/S Incline Screw Conveyor, 9 in Diameter x 48 in Long S/S Screw. Top Mounted 40.5 in L x 28 in W x 26 in D S/S Feed Hopper, 48 in Discharge Height, S/S Square Tube Frame, 3 HP Drive. Model WBC20 18 in W x 18.5 ft L Suspended Weigh Belt Conveyor with 18 in Wide Drag Type Rubberized Belt, (4) HBM Model S35-1K-20575 1,000 Pound Capacity Load Cells, S/S Frame with S/S Square Tube Stand, 1 HP S/S Wash Down Motor. 230/460 V, 3Ph, 60 Hz.

Wolfking Portable 9 in Dia S/S Horizontal Screw Feeding a Vertical Screw Co Wolfking Portable 9 in Dia S/S Horizontal Screw Feeding a Vertical Screw Co

Wolfking Portable 9 in Dia S/S Horizontal Screw Feeding a Vertical Screw Co

Lot #460 (Sale Order 460 of 239)

Wolfking Portable 9 in Dia S/S Horizontal Screw Feeding a Vertical Screw Conveyor. HORIZONTAL INFEED: 82 in L S/S Horizontal Infeed Section with 20 in W x 19 in Deep Trough, 9 in Diameter S/S Screw, 4 in Diameter Shaft, 8 in Centers, Hinged S/S Safety Grate. Feeding the VERTICAL SECTION: 81 in L x 9 in Diameter S/S Vertical Incline Section. 103 in Discharge Height, 9 in Diameter Screw 9.5 in Diameter S/S Trough with S/S Hinged Clamp Down Cover, S/S Frame with Casters. 15 HP Vertical Drive, 230/460 V, 3 Ph, 60 Hz, 39/19.5 Amp, 1770 RPM. Horizontal Drive 230/460 V, 3 Ph, 60 Hz, 14/7 Amp, 1730 RPM. Unit Runs fine but needs Connection Clamp between the two units that Wolfking will not sell direct to a dealer, End user will have to purchase additionally.

Hapman Mdl 500SS S/S Dump Hopper (for flexible screw conveyor), 5 in dia au Hapman Mdl 500SS S/S Dump Hopper (for flexible screw conveyor), 5 in dia au

Hapman Mdl 500SS S/S Dump Hopper (for flexible screw conveyor), 5 in dia au

Lot #462 (Sale Order 462 of 239)

Hapman Mdl 500SS S/S Dump Hopper (for flexible screw conveyor), 5 in dia auger connection port, 24 in x 24 in  x 16 in deep hopper opening w/ dump grate, (4) 56 in L  S/S legs

Spiroflow Model FCS658A14 Six Inch Diameter Flexible Screw Conveyor. Approx Spiroflow Model FCS658A14 Six Inch Diameter Flexible Screw Conveyor. Approx

Spiroflow Model FCS658A14 Six Inch Diameter Flexible Screw Conveyor. Approx

Lot #464 (Sale Order 464 of 239)

Spiroflow Model FCS658A14 Six Inch Diameter Flexible Screw Conveyor. Approximately 26,000 Pounds Per Hour Capacity (Depending on material and conveyor length). (2) Approx 6 in Diameter x 196 in L Round Mild Steel Screws. (2) Approx 6 5/8 in Diameter Poly Tubes. 45 Degree Mild Steel Outlet Assembly with 7 1/2 in Diameter Discharge Opening. Includes Additional 45 Degree Outlet Assembly with 7 1/2 in Diameter Discharge. 7.5 HP, 230/460 V, 3 Ph, 60 Hz, 1770 RPM Sever Duty XP Motor.

Spiroflow Model FCS658A14.5 Six Inch Diameter Flexible Screw Conveyor. Appr Spiroflow Model FCS658A14.5 Six Inch Diameter Flexible Screw Conveyor. Appr

Spiroflow Model FCS658A14.5 Six Inch Diameter Flexible Screw Conveyor. Appr

Lot #466 (Sale Order 466 of 239)

Spiroflow Model FCS658A14.5 Six Inch Diameter Flexible Screw Conveyor. Approximately 26,000 Pounds Per Hour Capacity (Depending on material and conveyor length). (2) Approx 6 in Diameter x 196 in L Round Mild Steel Screws. (2) Approx 6 5/8 in Diameter Poly Tubes. 45 Degree Mild Steel Outlet Assembly with 7 1/2 in Diameter Discharge Opening. Includes Additional 45 Degree Outlet Assembly with 7 1/2 in Diameter Discharge. 7.5 HP, 230/460 V, 3 Ph, 60 Hz, 1770 RPM Sever Duty XP Motor.

Allen Model 712682 S/S Over / Under Sizing Conveyor with 12 S/S Sizing Roll Allen Model 712682 S/S Over / Under Sizing Conveyor with 12 S/S Sizing Roll

Allen Model 712682 S/S Over / Under Sizing Conveyor with 12 S/S Sizing Roll

Lot #468 (Sale Order 468 of 239)

Allen Model 712682 S/S Over / Under Sizing Conveyor with 12 S/S Sizing Rollers Mounted on C/S Frame. 33 in L x 42 in W x 18 in D Main Hopper Area with Discharge Chute. 13 in L x 42 in W x 18 in D Secondary Hopper Area with Discharge Chute. 78 in H C/S Frame. 1/2 HP Drive, 1725/1425 RPM, 208-230/460V, 60Hz, 3Ph.

Key Model S10132731 Iso Flo Cross Feed Vibratory Conveyor Distribution Syst Key Model S10132731 Iso Flo Cross Feed Vibratory Conveyor Distribution Syst

Key Model S10132731 Iso Flo Cross Feed Vibratory Conveyor Distribution Syst

Lot #470 (Sale Order 470 of 239)

Key Model S10132731 Iso Flo Cross Feed Vibratory Conveyor Distribution System for (2) Vertical Form Fill and Seal Machines. Suspended From Ceiling. Consisting of (1) Key Model S1013274-1 Iso Flo 14 in W x 89 in L S/S Vibratory Distribution Conveyor, 5 1/2 in Deep, 2,500 Pounds Per Hour Maximum Capacity, Maximum Stroke 6.5, Design Stroke 5.0, Design Speed 834 RPM, Bulk Density 35 Cu Ft, (2) Pneumatic In-Line Discharge Gates, 1 HP S/S Motor, Overall Dimensions 89 1.4 in L x 32 3/4 in W x 50 1/8 in H. (2) Key Model S1013275-1 Iso Flo 10 in W x 87 in L S/S Vibratory Conveyor, 8 5/16 in Deep on High End, 5 in Deep on Low End, 550 Pounds Per Hour Maximum Capacity, Maximum Stroke 6.0, Design Stroke 5.0, Design Speed 975 RPM, Bulk Density 35 Cu Ft, 5 3/4 in Diameter End Discharge, 1 HP S/S Motor, Overall Dimensions 101 7/16 in L x 28 3/4 in W x 43 3/8 in H. 460V, 3 Ph, 60 Hz.

Key Model S10132751 10 in W x 87 in L S/S  Ceiling Mounted Iso Flo Vibrator Key Model S10132751 10 in W x 87 in L S/S  Ceiling Mounted Iso Flo Vibrator

Key Model S10132751 10 in W x 87 in L S/S  Ceiling Mounted Iso Flo Vibrator

Lot #472 (Sale Order 472 of 239)

Key Model S10132751 10 in W x 87 in L S/S  Ceiling Mounted Iso Flo Vibratory Conveyor (Price each we have three available), 8 5/16 in Deep on High End, 5 in Deep on Low End, 550 Pounds Per Hour Maximum Capacity, Maximum Stroke 6.0, Design Stroke 5.0, Design Speed 975 RPM, Bulk Density 35 Cu Ft, 5 3/4 in Diameter End Discharge, 1 HP S/S Motor, Overall Dimensions 101 7/16 in L x 28 3/4 in W x 43 3/8 in H. 460V, 3 Ph, 60 Hz.

CFS Model HLT6000/600 FlowCook 600 mm Wide x 6400 mm L S/S Continuous Linea CFS Model HLT6000/600 FlowCook 600 mm Wide x 6400 mm L S/S Continuous Linea

CFS Model HLT6000/600 FlowCook 600 mm Wide x 6400 mm L S/S Continuous Linea

Lot #474 (Sale Order 474 of 239)

CFS Model HLT6000/600 FlowCook 600 mm Wide x 6400 mm L S/S Continuous Linear Oven. Electrically Heated. 600 mm W S/S Wire Mesh Conveyor. 6400 mm Long Chamber. 146 mm Height Clearance at Infeed and Discharge. 2 Heat Zones. Maximum Cooking Temperature of 240 Degrees C. Humidity Controlled by Zone Individually. Horizontal and Vertical Airflow.  Hood Lifting Elevators on Each End, 51 in Long Sections. Belt Cleaning Brush, High Pressure Belt Cleaning Spray Bar, Jumo Digital Temperature and Steam Valve Controls. Variable Speed Conveyor. 400 V, 3 Ph, 60 Hz, 200 Amp, 130 Kw.

Manitowoc (Garland) Model MCOE5LDSMD S/S Half-Size Electric Convection Oven Manitowoc (Garland) Model MCOE5LDSMD S/S Half-Size Electric Convection Oven

Manitowoc (Garland) Model MCOE5LDSMD S/S Half-Size Electric Convection Oven

Lot #478 (Sale Order 478 of 239)

Manitowoc (Garland) Model MCOE5LDSMD S/S Half-Size Electric Convection Oven. Interior Dimensions 15.5 in W x 20 in H x 21 in D. Digital Push Button Controls. Mounted on S/S Cart with Casters. 8kW. 208 V, 3 Ph, 60 Hz, 23 Amp.

Alto Shaam Single Drawer Warmer S/N 1426600101, 208/240V, 1050Watts Alto Shaam Single Drawer Warmer S/N 1426600101, 208/240V, 1050Watts

Alto Shaam Single Drawer Warmer S/N 1426600101, 208/240V, 1050Watts

Lot #479 (Sale Order 479 of 239)

Alto Shaam Single Drawer Warmer S/N 1426600101, 208/240V, 1050Watts

165 in W x 90 in H x 20 in D S/S (4) Door Electrical Control Enclosure. (4) 165 in W x 90 in H x 20 in D S/S (4) Door Electrical Control Enclosure. (4)

165 in W x 90 in H x 20 in D S/S (4) Door Electrical Control Enclosure. (4)

Lot #480 (Sale Order 480 of 239)

165 in W x 90 in H x 20 in D S/S (4) Door Electrical Control Enclosure. (4) Hinged Doors with Secure Latches, (2) Interior Fluorescent Lights, Side Mounted Cooling Unit.

76 mm wide Piv-Getriebe Mdl A1E Single Head Labco Extruder with Guillotine 76 mm wide Piv-Getriebe Mdl A1E Single Head Labco Extruder with Guillotine

76 mm wide Piv-Getriebe Mdl A1E Single Head Labco Extruder with Guillotine

Lot #482 (Sale Order 482 of 239)

76 mm wide Piv-Getriebe Mdl A1E Single Head Labco Extruder with Guillotine and conveyor, Approx Overall Dims: 10ft. L X 3ft.6in. W X 5ft. 6in. H  With 6in. wide Guilotine, 8in. X 8 1/2ft. L Rubberized Belt Conveyor Aluminum Die  S/S Hopper Type: A 1 E Gear Nr: 234129 Ratio: 1-5 Chain Nr: A2 25v  Technical Data: 850 1900/380 08mkg Electrical: 1 kw/1.34 HP, 420 V, 50 Hz

The Perfect Score Co Multi Axis Slitter Conveyor System. 25 nozzle slitter, The Perfect Score Co Multi Axis Slitter Conveyor System. 25 nozzle slitter,

The Perfect Score Co Multi Axis Slitter Conveyor System. 25 nozzle slitter,

Lot #484 (Sale Order 484 of 239)

The Perfect Score Co Multi Axis Slitter Conveyor System. 25 nozzle slitter, 38 in L single manifold, 25 orifice manifold on 1.375 in centers, 1 in elbow, 9.16 to 1 in adapter, Omni-Jet remote on/off Valve, 2 Nozzles Cross Cut for 2 in product length. 48 in W x 51 in L infeed section, 41 1/4 in W x 7 ft L discharge conveyor with plastic interlocking chain, product residue catch basin with 3/4 HP exhaust blower. Allen Bradley PanelView Plus 600 HMI, Allen Bradley Compact Logix L27ERM I/O, Allen Bradley Kinetix 350 X and Y axis servos, (4) Allen Bradley PowerFlex 525 VFDs. S/S frame with casters and leveling feet.

Jet Edge Model 36-100B, 100 HP Intensifier Pump. Adjustable output pressure Jet Edge Model 36-100B, 100 HP Intensifier Pump. Adjustable output pressure

Jet Edge Model 36-100B, 100 HP Intensifier Pump. Adjustable output pressure

Lot #485 (Sale Order 485 of 239)

Jet Edge Model 36-100B, 100 HP Intensifier Pump. Adjustable output pressures from 5,000 to 36,000 PSI and a flow rate of 3.5 gallons per minute. The 36-100 utilizes a pressure compensated hydraulic system to drive two plunger style intensifiers. Water supply required at 40 PSI, on board filtration to 1 micron, maximum coolant water temperature 70 degrees F, 100 HP high efficiency TEFC electric motor, PLC manages operating parameters, 5 gallon high pressure attenuator to stabilize operating pressure, automatic safety pressure bleed down valve to relieve pressure from system. Thermostatically controlled cooling system to reduce cooling water usage, integrated power distribution panel with system disconnect, on board pressure booster to ensure adequate water supply pressure to the intensifier. Dual hydraulic auxiliary port,  Hydraulic accumulator to dampen hydraulic fluid pulsations, full flow hydraulic filtration to 10 micron to increase hydraulic component life, safety shutdown system, tubular exoskeleton with lifting eyes. Thermal Care Accuchiller Model NQA08 air-cooled water chiller. 7.8 tons cooling capacity, 20-80 degrees F set point temperature range. R401A type refrigerant, 8,000 CFM condenser air flow, 7.5 HP compressor, (2) 1.5 HP condenser fans, 1.5 and .75 HP pumps, S/N 21626011409, 460 V, 3 Ph, 60 Hz.

Fuller Model 7MF 25 HP Vertical Blower. 5 in Diameter Flanged Inlet and Out Fuller Model 7MF 25 HP Vertical Blower. 5 in Diameter Flanged Inlet and Out

Fuller Model 7MF 25 HP Vertical Blower. 5 in Diameter Flanged Inlet and Out

Lot #488 (Sale Order 488 of 239)

Fuller Model 7MF 25 HP Vertical Blower. 5 in Diameter Flanged Inlet and Outlet, 1,800 RPM at 9 PSI, Belt Drive with Guard, Steel Base, 440 V, 3 Ph, 60 Hz.

Sutorbilt Model GAEMDPA (Catalog # 5MP), 15 HP Positive Displacement Blower Sutorbilt Model GAEMDPA (Catalog # 5MP), 15 HP Positive Displacement Blower

Sutorbilt Model GAEMDPA (Catalog # 5MP), 15 HP Positive Displacement Blower

Lot #490 (Sale Order 490 of 239)

Sutorbilt Model GAEMDPA (Catalog # 5MP), 15 HP Positive Displacement Blower. Horizontal Configuration, 4 in Diameter Inlet and Outlet, Approx .210 Cu Ft Displacement Per Revolution. (2) Figure 8 Impellers, 2850 Maximum RPM, 230/460 V (Wired 460 V), 3 Ph, 60 Hz.

Chicago Blower Size 16 1/2 1 HP Blower Fan with C/S Frame. Mounted on C/S F Chicago Blower Size 16 1/2 1 HP Blower Fan with C/S Frame. Mounted on C/S F

Chicago Blower Size 16 1/2 1 HP Blower Fan with C/S Frame. Mounted on C/S F

Lot #492 (Sale Order 492 of 239)

Chicago Blower Size 16 1/2 1 HP Blower Fan with C/S Frame. Mounted on C/S Frame with Legs, 40 in W x 10 1/4 in H Flanged Air Inlet, Belt Guard, 1 HP TENV Motor, Overall Height 9 Feet. 208-230/460 V (wired 460V), 3 Ph, 60 Hz, 1745 RPM, 3.1-2.9/1.45 Amps

Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/ Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/

Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/

Lot #494 (Sale Order 494 of 239)

Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/4 in W Flanged Air Inlet. (2) 24 in x 24 in Filters. 5 HP Motor, 230/460 V, 3 Ph, 60 Hz, 12.8/6.4 Amp, 1735 RPM, TEFC.

Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/ Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/

Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/

Lot #496 (Sale Order 496 of 239)

Chicago Blower Size 16 1/2, 5 HP Blower Fan with C/S Frame. 40 in L x 10 1/4 in W Flanged Air Inlet. (2) 24 in x 24 in Filters. 5 HP Motor, 230/460 V, 3 Ph, 60 Hz, 12.8/6.4 Amp, 1735 RPM, TEFC.

Sidel Model CF2024 S/S Cap Elevator Sorter with Orientation Reject Nozzle. Sidel Model CF2024 S/S Cap Elevator Sorter with Orientation Reject Nozzle.

Sidel Model CF2024 S/S Cap Elevator Sorter with Orientation Reject Nozzle.

Lot #498 (Sale Order 498 of 239)

Sidel Model CF2024 S/S Cap Elevator Sorter with Orientation Reject Nozzle. 24 in W Cleated Belt, 3 1/4 in on Center, 22 in W x 1/2 in H Cleats. 12 ft Discharge Height with Discharge Chute and Orientation Reject Chute. 8 ft L Vertical Section. S/S Hopper Measuring 36 in x 23 in x 33in with Plexiglas Hinged Cover. 24 in x 24 in Hinged Front Panel Access Door. Hopper Has Low Level Optical Sensors. S/S Frame and Control Cabinet. 480 V, 3 Ph, 60 Hz.

Thiele Model 608 S/S 6 Lane Reciprocating Placer. (6) 44 in Long x 3 3/4 in Thiele Model 608 S/S 6 Lane Reciprocating Placer. (6) 44 in Long x 3 3/4 in

Thiele Model 608 S/S 6 Lane Reciprocating Placer. (6) 44 in Long x 3 3/4 in

Lot #500 (Sale Order 500 of 239)

Thiele Model 608 S/S 6 Lane Reciprocating Placer. (6) 44 in Long x 3 3/4 in Wide V Shape S/S Product Magazines. Approx 70 in Discharge Height. Gast Model 1067V108 1/2 HP Vacuum Pump. Vorne Model 415 Digital Rate Monitor. S/S Frame with Casters and Leveling Feet.

Thiele S/S  8 Lane Reciprocating Placer. Pneumatically Driven. (8) 60 in Lo Thiele S/S  8 Lane Reciprocating Placer. Pneumatically Driven. (8) 60 in Lo

Thiele S/S  8 Lane Reciprocating Placer. Pneumatically Driven. (8) 60 in Lo

Lot #502 (Sale Order 502 of 239)

Thiele S/S  8 Lane Reciprocating Placer. Pneumatically Driven. (8) 60 in Long Adjustable Width Open Rail Type Product Magazines Currently Set at 3 1/4 in Wide. Approx 65 in Discharge Height. S/S Frame with Casters and Leveling Feet.

Thiele Model 508 S/S 6 Lane Reciprocating Placer. (6) 36 in Long x 3 3/4 in Thiele Model 508 S/S 6 Lane Reciprocating Placer. (6) 36 in Long x 3 3/4 in

Thiele Model 508 S/S 6 Lane Reciprocating Placer. (6) 36 in Long x 3 3/4 in

Lot #504 (Sale Order 504 of 239)

Thiele Model 508 S/S 6 Lane Reciprocating Placer. (6) 36 in Long x 3 3/4 in Wide V Shape S/S Product Magazines. Approx 70 in Discharge Height. 1/2 HP Vacuum Pump. Vorne Model 415 Digital Rate Monitor. S/S Frame with Casters and Leveling Feet.

Heat and Control Dual twin screw Feeder, (2) feeder on common S/S frame w/ Heat and Control Dual twin screw Feeder, (2) feeder on common S/S frame w/

Heat and Control Dual twin screw Feeder, (2) feeder on common S/S frame w/

Lot #506 (Sale Order 506 of 239)

Heat and Control Dual twin screw Feeder, (2) feeder on common S/S frame w/ single discharge chute  8 in x 8 in outlet, each feeder has (2) 3 1/2 in dia x 42 in L 316 S/S Screws, Top feed hopper 24 in x 20 in x 36 in deep,  1 HP 3/330/575/60 1700 vari speed motor, Mounted on 304 S/S frame

Approx 40 Gal S/S Sweep Agitated Cone Single Wall Hopper. Top Entering S/S Approx 40 Gal S/S Sweep Agitated Cone Single Wall Hopper. Top Entering S/S

Approx 40 Gal S/S Sweep Agitated Cone Single Wall Hopper. Top Entering S/S

Lot #508 (Sale Order 508 of 239)

Approx 40 Gal S/S Sweep Agitated Cone Single Wall Hopper. Top Entering S/S Sweep Type Agitator, 4 in Diameter and 1.5 in Diameter Tri-Clamp Top Inlets, 4 in Diameter Tri-Clamp CBO, Approx 24 in Diameter at Widest Point, 17.5 in L Cone Section, 36 in Total Depth, 1/2 HP, 208-230/460 V, 3 Ph, 60 Hz, 1725 RPM, 1.8-1.6/.8 Amps.

60 in Dia Engineered Automation Model 89209 S/S Rotary Bowl Feeder. Approx 60 in Dia Engineered Automation Model 89209 S/S Rotary Bowl Feeder. Approx

60 in Dia Engineered Automation Model 89209 S/S Rotary Bowl Feeder. Approx

Lot #510 (Sale Order 510 of 239)

60 in Dia Engineered Automation Model 89209 S/S Rotary Bowl Feeder. Approx 3 7/8 in W Discharge Chute. 56 in Discharge Height. S/S Frame and Legs with Height Adjustable Feet. Last feeding flat lids to a friction closure

Tetra Pak Model C6SH 75 Sq Ft S/S Plate and Frame Heat Exchanger. (43) 0.60 Tetra Pak Model C6SH 75 Sq Ft S/S Plate and Frame Heat Exchanger. (43) 0.60

Tetra Pak Model C6SH 75 Sq Ft S/S Plate and Frame Heat Exchanger. (43) 0.60

Lot #514 (Sale Order 514 of 239)

Tetra Pak Model C6SH 75 Sq Ft S/S Plate and Frame Heat Exchanger. (43) 0.60 mm Thick S/S Plates with Gaskets Each Measuring 39 in H x 7 in W. Total Width of Plate Bank is 261mm (10.28 in). Maximum Working Pressure 290 PSI at 260 Degrees F. Minimum Design Metal Temperature -20 Degrees F at 290 PSI. Liquid Volume 7.74 Gallons. (6) 2 in Diameter Tri-Clamp Inlets and Outlets For Product, Hot Water, and Steam. S/S Frame and Legs.

Chester Jensen Model XB4OT432 S/S Falling Film Plate Chiller. Cooling Capac Chester Jensen Model XB4OT432 S/S Falling Film Plate Chiller. Cooling Capac

Chester Jensen Model XB4OT432 S/S Falling Film Plate Chiller. Cooling Capac

Lot #516 (Sale Order 516 of 239)

Chester Jensen Model XB4OT432 S/S Falling Film Plate Chiller. Cooling Capacity 80 Tons at 128 GPM For a 26 Degree F Suction Using Full Flooded Ammonia. 4 Plates with 32 Corrugations Each. Total Cooling Area 171 Sq Ft. Plate Dimensions 5 ft L x 3 ft 9 in H. Collection Tank Approx 125 Gallons. 4 in Diameter Flanged Inlet/Outlet

Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat

Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat

Lot #518 (Sale Order 518 of 239)

Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat Exchanger. Has 6 Titanium Plates, Plate Dimensions 29.5 in L x 9 in W, Kathene Type Fluid, Maximum Working Pressure 100 PSI at 30 Degrees F, 2 Inch Diameter Inlets and Outlets with EPDM Gaskets, Overall Frame Dimensions 34 3/4 in L x 12 3/4 in W.

Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat

Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat

Lot #520 (Sale Order 520 of 239)

Kathabar Systems Model M6MFM7 Approx 2 Sq Ft  Kathene Plate and Frame Heat Exchanger. Has 6 Titanium Plates, Plate Dimensions 29.5 in L x 9 in W, Kathene Type Fluid, Maximum Working Pressure 100 PSI at 30 Degrees F, 2 Inch Diameter Inlets and Outlets with EPDM Gaskets, Overall Frame Dimensions 34 3/4 in L x 12 3/4 in W.

Cherry Burrell Model 435SB1 (Approx.) 550 Sq Ft S/S Plate and Frame Heat Ex Cherry Burrell Model 435SB1 (Approx.) 550 Sq Ft S/S Plate and Frame Heat Ex

Cherry Burrell Model 435SB1 (Approx.) 550 Sq Ft S/S Plate and Frame Heat Ex

Lot #522 (Sale Order 522 of 239)

Cherry Burrell Model 435SB1 (Approx.) 550 Sq Ft S/S Plate and Frame Heat Exchanger. (125) S/S Plates Each Measuring 46 in H x 14 in W. Total Width of Plate Bank is 18 1/2 in. 2 in Diameter Tri-Clamp Inlets and Outlets. (1) Divider Plate with 2 in Diameter Tri-Clamp Inlet and Outlet. S/S Legs.

3 in Diameter x 9 ft Long S/S (5) Pass Single Tube Loop Pasteurizer. (9) 3 3 in Diameter x 9 ft Long S/S (5) Pass Single Tube Loop Pasteurizer. (9) 3

3 in Diameter x 9 ft Long S/S (5) Pass Single Tube Loop Pasteurizer. (9) 3

Lot #524 (Sale Order 524 of 239)

3 in Diameter x 9 ft Long S/S (5) Pass Single Tube Loop Pasteurizer. (9) 3 in Diameter x 9 ft L Tubes. 2 in Diameter Tri-Clamp Inlet and Outlet. 67 in Infeed Height, 29 in Discharge Height on S/S Frame.

Hughes Company Model 0042177D S/S Hot Water Recovery Recirculation System w Hughes Company Model 0042177D S/S Hot Water Recovery Recirculation System w

Hughes Company Model 0042177D S/S Hot Water Recovery Recirculation System w

Lot #528 (Sale Order 528 of 239)

Hughes Company Model 0042177D S/S Hot Water Recovery Recirculation System with 1/2 HP S/S Centrifugal Pump. 310 Gallon Capacity Insulated Hot Water Tank, 46.5 Gallon Capacity in Fresh Water Tubes. Contact Area of Fresh Water Tubing is 9.37 Sq Ft in 8 Foot Pipe and 56.59 Sq Ft in 4 Foot Pipe. 208/230V, 3 Ph, 60 Hz.

22 Linear Feet 8 Loop S/S Tube in Tube Heat Exchanger with 1 3/8 in Diamete 22 Linear Feet 8 Loop S/S Tube in Tube Heat Exchanger with 1 3/8 in Diamete

22 Linear Feet 8 Loop S/S Tube in Tube Heat Exchanger with 1 3/8 in Diamete

Lot #530 (Sale Order 530 of 239)

22 Linear Feet 8 Loop S/S Tube in Tube Heat Exchanger with 1 3/8 in Diameter Tubing. 1 1/2 in Diameter Tri-Clamp Inlets and Outlets. Galvanized Drain Pipes With Valves. Mounted on S/S Frame and Legs with Casters

(2) Takagi Model TK3 Natural Gas Fired Automatic Instantaneous Water Heater (2) Takagi Model TK3 Natural Gas Fired Automatic Instantaneous Water Heater

(2) Takagi Model TK3 Natural Gas Fired Automatic Instantaneous Water Heater

Lot #532 (Sale Order 532 of 239)

(2) Takagi Model TK3 Natural Gas Fired Automatic Instantaneous Water Heaters. Maximum Input Rating 199,000 BTU. Minimum Input Rating 11,000 BTU. Maximum Inlet Gas Pressure 10.5 Inches W.C. Minimum Inlet Gas Pressure 5 Inches W.C. Manifold Pressure 2.5 Inches W.C. Recovery Rating 254 Gallons. Maximum Water Pressure 150 PSI. For Indoor or Outdoor Installation. 20.5 in H x 14 in W x 8.5 in D. 120 V, 60 Hz.

Krones Passmatic 150 cpm Cold Glue Wrap around Labeler Rated 50 to 150 Cont Krones Passmatic 150 cpm Cold Glue Wrap around Labeler Rated 50 to 150 Cont

Krones Passmatic 150 cpm Cold Glue Wrap around Labeler Rated 50 to 150 Cont

Lot #534 (Sale Order 534 of 239)

Krones Passmatic 150 cpm Cold Glue Wrap around Labeler Rated 50 to 150 Containers Per Minute Depending on Materials and Application. Label Size Range: 2-1/8 in to 7-1/8 in Length; up to 5-1/8 in Height. 52 in L Wormscrew Infeed, Cold Glue Pump, 54 in Long Wrap Section. 230/460 V, 3 Ph, 60 Hz, 13.6/6.8 Amp, 5 HP, 1740 RPM.

Quadrel Twin Head Pressure Sensitive Bottom Labeling System with Quadrel R2 Quadrel Twin Head Pressure Sensitive Bottom Labeling System with Quadrel R2

Quadrel Twin Head Pressure Sensitive Bottom Labeling System with Quadrel R2

Lot #536 (Sale Order 536 of 239)

Quadrel Twin Head Pressure Sensitive Bottom Labeling System with Quadrel R220 Label Unwinder (S/N 79909-01. Year 2009). Twin Quadrel Model Q55 Pressure Sensitive Labeling Heads with M3 Microprocessor Control. Speeds up to 180 PPM depending on label length and product size. Dispensing speed up to 1,000 inches per minute. Label size range 1/2 in - 6 7/8 in Wide, Minimum label length 1/2 in. 12 in Diameter roll capacity on 3 in core. 7 inch web width, 3 3/4 in wide peeler plates. 6 ft L x 1 in W dual container gripper belts with adjustable width, height and pitch. Includes model R220 label unwinder. The R220 label unwind is ideally suited for supplying labels to all Quadrel Labeling Heads. Labels are unwound into the label bin and pulled out of the bin by the labeling head. When the bin is empty, the unwind system fills the bin automatically. As the label supply depletes, a warning indicator illuminates to inform the operator to prepare a label splice while the labeling head remains running. Dual 20 in label reels with 3 in cores. Low Label detection with amber lamp. Variable speed direct drive 1/4hp gear motor. Speeds of up to 4,000 inches per minute. 7 in wide web capacity. Allen Bradley Panelview C600 digital touch controls. Common aluminum frame with safety fencing. 208 V, 1 Ph, 60 Hz.

AEW Delford Concept 500 Top Pressure Sensitive Labeler able to apply label AEW Delford Concept 500 Top Pressure Sensitive Labeler able to apply label

AEW Delford Concept 500 Top Pressure Sensitive Labeler able to apply label

Lot #538 (Sale Order 538 of 239)

AEW Delford Concept 500 Top Pressure Sensitive Labeler able to apply label to 3 sides (Top, Side, Bottom) of package.  Operating at speeds of up to 180 labels per minute, and accommodating labels up to 100mm square,fast label changover, When the Concept 500 applicator is vertically mounted over a split belt conveyor, the system is capable of positioning a label around three sides of a tray or container, Panel Label Applicator grips the pack on driven side belts and suspends the label, allowing the pack to be driven through it. the Concept 500 can be positioned in any direction thanks to a lockable turning mechanism.22 in L x 10 1/2 in W rubber belt infeed conveyor, (2) 22 in L x 3 in H Rubber side carry Belt Conveyors,  22 in L x 10 1/2 in W rubber belt out feed conveyor, Adjustable Height, Top Air Assist

Auto Labe Model 110RH Automatic Pressure Sensitive Labeler. Bottom Mounted Auto Labe Model 110RH Automatic Pressure Sensitive Labeler. Bottom Mounted

Auto Labe Model 110RH Automatic Pressure Sensitive Labeler. Bottom Mounted

Lot #540 (Sale Order 540 of 239)

Auto Labe Model 110RH Automatic Pressure Sensitive Labeler. Bottom Mounted on Conveyor. 1,250 Inches Per Minute Continuous Web Speed. Web Widths of 1/4 in to 4 1/2 in. 10 in OD Roll with 3 in Core. Auto Labe Model 630 8 3/4 in W x 98 in L Banjo Belt Conveyor with Adjustable Rail Guides, Auto Labe Controls with Conveyor Speed and Labeler Speed and Delay Potentiometers and Provision For Second Labeler. Manual Height Adjustable Stand. All Mounted on Common S/S Frame with Casters. 115 V, 1 Ph, 60 Hz.

ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Do ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Do

ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Do

Lot #542 (Sale Order 542 of 239)

ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Down Application with 5 in x 2 1/2 in Tamp Pad. Standard Label Size Range 1 in Minimum - 6.6 in Maximum Length,  0.25 in Minimum - 7.1 in Maximum Width. 12.5 in Diameter with 3 in Diameter Core Label Roll Size. Speeds up to 12 Inches Per Second, Approx. 100 PPM (depending on product and label). Sato Model 8485SE Print Engine. 5 Inch Print Width, 32-bit Microprocessor, 16 MB Standard RAM, 203 dpi Print Resolution, Maximum Print Area 5 in W x 49.2 in L, Media Size 5.27 in W Maximum, Minimum 1 in W x 0.24 in L. Fonts From 2 to 99 Points. Linear and Two-Dimensional Bar Codes. Mounted on Adjustable T-Stand with Casters.

(2) Weber Model 5200V2 RFID Print and Apply Labeler Systems with Zebra 110P (2) Weber Model 5200V2 RFID Print and Apply Labeler Systems with Zebra 110P

(2) Weber Model 5200V2 RFID Print and Apply Labeler Systems with Zebra 110P

Lot #544 (Sale Order 544 of 239)

(2) Weber Model 5200V2 RFID Print and Apply Labeler Systems with Zebra 110PAK4 RFID Ready Print Driver. Mounted on Adjustable Stands. Weber Corner Wrap Label-Printers Are Specifically Designed to Place a Single Label Around the Corner of a Carton as it Travels Via Conveyor Line. Maximum of 15 Cartons Per Minute Delivered at Least 24 Inches Apart at Top Conveyor Speed of 60 Feet Per Minute. Applies Labels Up To 4 in Wide and 12 in Long, Direct Thermal or Thermal Transfer Printing Methods, Print Speed of up to 12 ips Depending on Print Engine, 12 in OD Maximum Roll Size, Die Cut Labels with 0.125 in Minimum Separation Between Label in Running Direction and 0.125 in Maximum Web Over Label Width, Capable of Printing Various Fonts, Bar Codes, Matrix and Maxicodes. 115 V, 1 Ph, 60 Hz.

(2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK (2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK

(2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK

Lot #546 (Sale Order 546 of 239)

(2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK4 RFID Ready Print Driver. Mounted on Adjustable Stands. Weber Corner Wrap Label-Printers Are Specifically Designed to Place a Single Label Around the Corner of a Carton as it Travels Via Conveyor Line. Maximum of 15 Cartons Per Minute Delivered at Least 24 Inches Apart at Top Conveyor Speed of 60 Feet Per Minute. Applies Labels Up To 4 in Wide and 12 in Long, Direct Thermal or Thermal Transfer Printing Methods, Print Speed of up to 12 ips Depending on Print Engine, 12 in OD Maximum Roll Size, Die Cut Labels with 0.125 in Minimum Separation Between Label in Running Direction and 0.125 in Maximum Web Over Label Width, Capable of Printing Various Fonts, Bar Codes, Matrix and Maxicodes. 115 V, 1 Ph, 60 Hz.

(2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK (2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK

(2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK

Lot #548 (Sale Order 548 of 239)

(2) Weber Model 5200 RFID Print and Apply Labeler Systems with Zebra 110PAK4 RFID Ready Print Driver. Mounted on Adjustable Stands. Weber Corner Wrap Label-Printers Are Specifically Designed to Place a Single Label Around the Corner of a Carton as it Travels Via Conveyor Line. Maximum of 15 Cartons Per Minute Delivered at Least 24 Inches Apart at Top Conveyor Speed of 60 Feet Per Minute. Applies Labels Up To 4 in Wide and 12 in Long, Direct Thermal or Thermal Transfer Printing Methods, Print Speed of up to 12 ips Depending on Print Engine, 12 in OD Maximum Roll Size, Die Cut Labels with 0.125 in Minimum Separation Between Label in Running Direction and 0.125 in Maximum Web Over Label Width, Capable of Printing Various Fonts, Bar Codes, Matrix and Maxicodes. 115 V, 1 Ph, 60 Hz.

Auto Labe Model 280 Semi Automatic Pressure Sensitive Labeler. Designed For Auto Labe Model 280 Semi Automatic Pressure Sensitive Labeler. Designed For

Auto Labe Model 280 Semi Automatic Pressure Sensitive Labeler. Designed For

Lot #550 (Sale Order 550 of 239)

Auto Labe Model 280 Semi Automatic Pressure Sensitive Labeler. Designed For Pin Fed, Fan Fold or Roll Stock Die Cut Labels. Accommodates Up to 5 Inch Web Width. Die Cut with 1/8 in Spacing. 10 in Outside Diameter Roll with 1 in Core. Foot Pedal Activation. Lightweight and Portable. Can be Used with Hot Stamp Imprinter.  115 V, 1 Ph, 60 Hz.

CTM 360 Tamp on Pressure Sensitive Labeler oin Adjustable Stand. Left Hand CTM 360 Tamp on Pressure Sensitive Labeler oin Adjustable Stand. Left Hand

CTM 360 Tamp on Pressure Sensitive Labeler oin Adjustable Stand. Left Hand

Lot #552 (Sale Order 552 of 239)

CTM 360 Tamp on Pressure Sensitive Labeler oin Adjustable Stand. Left Hand Tamp Configuration. 5 in x 3 1/2 in Tamp Pad. Web Speeds Between 100 and 1,500 Inches Per Minute. Minimum Label Size 3/4 in W x 3/4 in L. Maximum Label Size 10 in W x 10 in L. Requires Liner Label Web with Minimum Label Gap of 1/8 in. Maximum Label Roll Diameter of 12 in. 12 in Diameter Label Reel with 3 in Diameter Core. Up to 10 Different Label Setups Can Be Saved. Digital Touch Controls. 120 V, 1 Ph, 60 Hz.

Zebra Model 170XiIIIPlus Label Printer. The 170XiIIIPlus printer is ideal f Zebra Model 170XiIIIPlus Label Printer. The 170XiIIIPlus printer is ideal f

Zebra Model 170XiIIIPlus Label Printer. The 170XiIIIPlus printer is ideal f

Lot #554 (Sale Order 554 of 239)

Zebra Model 170XiIIIPlus Label Printer. The 170XiIIIPlus printer is ideal for tough applications including compliance labels (AIAG, ODETTE, UCC/EAN-128, etc.), product identification labels, pallet shipping/receiving labels either on demand or in batches. The 170XiIIIPlus is designed to deliver maximum performance and reliability in the most demanding industrial applications. The 170XiIIIPlus features 16MB RAM, 4MB Flash, & standard parallel, serial, and USB 2.0 interface ports. Maximum print area 6.6 inches. Maximum length 39 inches. 300 dpi/12 dots per mm resolution.. Maximum print speed 8 inches per second.

ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Do ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Do

ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Do

Lot #558 (Sale Order 558 of 239)

ID Technology Model 250 Pressure Sensitive Print and Apply Labeler. Tamp Down Application with 5 in x 2 1/2 in Tamp Pad. Standard Label Size Range 1 in Minimum - 6.6 in Maximum Length,  0.25 in Minimum - 7.1 in Maximum Width. 12.5 in Diameter with 3 in Diameter Core Label Roll Size. Speeds up to 12 Inches Per Second, Approx. 100 PPM (depending on product and label). Sato Model 8485SE Print Engine. 5 Inch Print Width, 32-bit Microprocessor, 16 MB Standard RAM, 203 dpi Print Resolution, Maximum Print Area 5 in W x 49.2 in L, Media Size 5.27 in W Maximum, Minimum 1 in W x 0.24 in L. Fonts From 2 to 99 Points. Linear and Two-Dimensional Bar Codes. Mounted on Adjustable T-Stand with Casters.

Ohaus 20 kg Maximum Capacity Heavy Duty Bench Top Solution Mechanical Beam Ohaus 20 kg Maximum Capacity Heavy Duty Bench Top Solution Mechanical Beam

Ohaus 20 kg Maximum Capacity Heavy Duty Bench Top Solution Mechanical Beam

Lot #560 (Sale Order 560 of 239)

Ohaus 20 kg Maximum Capacity Heavy Duty Bench Top Solution Mechanical Beam Scale with Counter Weights

Belam Double Head Stainless Steel Injector with (260) Needles, 26 in. Walki Belam Double Head Stainless Steel Injector with (260) Needles, 26 in. Walki

Belam Double Head Stainless Steel Injector with (260) Needles, 26 in. Walki

Lot #561 (Sale Order 561 of 239)

Belam Double Head Stainless Steel Injector with (260) Needles, 26 in. Walking Beam Conveyor, Roto Filter, Brine Tank, Digital Controls (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Handtmann Model HVF95 S/S Vacuum Stuffer with S/S Auger Feed. (Located at 5 Handtmann Model HVF95 S/S Vacuum Stuffer with S/S Auger Feed. (Located at 5

Handtmann Model HVF95 S/S Vacuum Stuffer with S/S Auger Feed. (Located at 5

Lot #563 (Sale Order 563 of 239)

Handtmann Model HVF95 S/S Vacuum Stuffer with S/S Auger Feed. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Lot - (1,000) S/S Ham Mold Springs, Approx 6 in Long (Located at 518 Reiman Lot - (1,000) S/S Ham Mold Springs, Approx 6 in Long (Located at 518 Reiman

Lot - (1,000) S/S Ham Mold Springs, Approx 6 in Long (Located at 518 Reiman

Lot #563A (Sale Order 563 of 239)

Lot - (1,000) S/S Ham Mold Springs, Approx 6 in Long (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Cintex Auto Search II Metal Detector, Aperture: 14 in W x 3 in H, 14 in W x Cintex Auto Search II Metal Detector, Aperture: 14 in W x 3 in H, 14 in W x

Cintex Auto Search II Metal Detector, Aperture: 14 in W x 3 in H, 14 in W x

Lot #564 (Sale Order 564 of 239)

Cintex Auto Search II Metal Detector, Aperture: 14 in W x 3 in H, 14 in W x 2 in H with Belt, 48 in L x 10 in W x 36 in H Incline Belt Conveyor. Discharge Height of Conveyor 42 in, Fixed Conveyor Speed Est 200 FPM, Buzzer and Strobe Light Style Reject, Test Samples Passed: 2.5mm 316 s/s, 2mm Ferrous, 2mm Non Ferrous.

Loma Model IQ2 Banjo Belt Conveyorized Metal Detector 46 in Wide x 1 1/8 in Loma Model IQ2 Banjo Belt Conveyorized Metal Detector 46 in Wide x 1 1/8 in

Loma Model IQ2 Banjo Belt Conveyorized Metal Detector 46 in Wide x 1 1/8 in

Lot #566 (Sale Order 566 of 239)

Loma Model IQ2 Banjo Belt Conveyorized Metal Detector 46 in Wide x 1 1/8 in H Aperture (46 in x 3 in Total Aperture). Retracting Belt Type Reject. Approx Conveyor Speed 75 Feet Per Minute. Digital Touch Controls, S/S Frame. Test Samples Passed 1.5mm Ferrous, 1.5mm Non Ferrous, 2mm 316 S/S. 115 V, 1 Ph, 60 Hz.

Safeline Banjo Belt Conveyorized Metal Detector with 32 in Wide x 1 5/8 in Safeline Banjo Belt Conveyorized Metal Detector with 32 in Wide x 1 5/8 in

Safeline Banjo Belt Conveyorized Metal Detector with 32 in Wide x 1 5/8 in

Lot #568 (Sale Order 568 of 239)

Safeline Banjo Belt Conveyorized Metal Detector with 32 in Wide x 1 5/8 in High Aperture. Total Aperture 32 in W x 2 2/1 in H. Retractable Style Reject with S/S Catch Bin, 27.5 in W Banjo Belt Conveyor, 13 in Long Infeed Section, 39 in Long Discharge/Reject Section, Mounted on Stainless Steel Frame, 115 V, 1 Ph 60 Hz. Conveyor 230/460 V, 3 Ph, 60 Hz.

26 in Wide S/S Twin Agitated Delumper. 26 in Wide x 17 3/4 in Long x 14 in 26 in Wide S/S Twin Agitated Delumper. 26 in Wide x 17 3/4 in Long x 14 in

26 in Wide S/S Twin Agitated Delumper. 26 in Wide x 17 3/4 in Long x 14 in

Lot #570 (Sale Order 570 of 239)

26 in Wide S/S Twin Agitated Delumper. 26 in Wide x 17 3/4 in Long x 14 in Deep Trough, Twin S/S Agitators with 4 in Long Pins, Perforated Trough Bottom with 1 1/4 in Diameter Holes, 11 in L x 9 in W Discharge Chute, 34.5 in Discharge Height, Hinged Cover with Safety Switch, (4) S/S Legs with Casters, 1/2 HP, 115 V, 1 Ph, 60 Hz, 7.9 Amp, Final RPM 22. Ratio 78.95:1.

Mikro Pulverizer Model CF S/S Bantam Pulverizer Mill. 3 in Diameter Rotor w Mikro Pulverizer Model CF S/S Bantam Pulverizer Mill. 3 in Diameter Rotor w

Mikro Pulverizer Model CF S/S Bantam Pulverizer Mill. 3 in Diameter Rotor w

Lot #572 (Sale Order 572 of 239)

Mikro Pulverizer Model CF S/S Bantam Pulverizer Mill. 3 in Diameter Rotor with (6) 1 1/4 in L Swing Hammers. 7 1/2 in Diameter x 6 1/2 in Deep S/S Feed Hopper, 7 1/2 in x 2 in Oval Discharge, Mounted on Portable Frame with Casters, Belt Driven Auger with 1/2 HP Drive, 3/4 HP Main Drive, 115 V, 1 Ph, 60 Hz.

Stephan Model TK150 S/S High Speed Portable Batch Mixer. Top Loading Horizo Stephan Model TK150 S/S High Speed Portable Batch Mixer. Top Loading Horizo

Stephan Model TK150 S/S High Speed Portable Batch Mixer. Top Loading Horizo

Lot #574 (Sale Order 574 of 239)

Stephan Model TK150 S/S High Speed Portable Batch Mixer. Top Loading Horizontal Mixer. Drum Capacity 150 Liters. Maximum Outputs 800 kg Per Hour, 90 kg Per Batch. Automatic Discharge with Dough Dividing Into Approximately 30 Pound Pieces, Slide Gate Bottom Discharge. Cycle Time Approximately 4-5 Minutes. 22.5 in Diameter x 21 in L S/S Mixing Chamber with Hinged Swing Open Cover. 13 3/4 in L x 8 1/2 in W Infeed Opening with Hinged Cover. Center Agitator and Scraper Arm For Discharge. 15 in L x 8 1/2 in W Slide Gate Discharge. 28 /34 in Discharge Height. SEW Eurodrive Model KAF77A 20 HP Drive Motor For Scraper Blade. Turku SL Series Digital Steam Controls. Herion Model 6356480 Hydraulic Unit. Water Heater Unit. C/S Frame with Casters. 1.9 kW, 220 V, 3 Ph, 60 Hz.

(10) AMF Model X8752 (24395001) 340 Quart Mixer Vari Speed Drive Block Belt (10) AMF Model X8752 (24395001) 340 Quart Mixer Vari Speed Drive Block Belt

(10) AMF Model X8752 (24395001) 340 Quart Mixer Vari Speed Drive Block Belt

Lot #576 (Sale Order 576 of 239)

(10) AMF Model X8752 (24395001) 340 Quart Mixer Vari Speed Drive Block Belts.

Continental Hydraulics Polypac Systems Center Hydraulic Power Unit with 20 Continental Hydraulics Polypac Systems Center Hydraulic Power Unit with 20

Continental Hydraulics Polypac Systems Center Hydraulic Power Unit with 20

Lot #578 (Sale Order 578 of 239)

Continental Hydraulics Polypac Systems Center Hydraulic Power Unit with 20 Gallon Tank. 5 HP, 575 V, 3 Ph, 60 Hz, 1730 RPM.

Lyco Model 8000 Dual 8 Roll Continuous Hydraulic Driven Abrasive Vegetable Lyco Model 8000 Dual 8 Roll Continuous Hydraulic Driven Abrasive Vegetable

Lyco Model 8000 Dual 8 Roll Continuous Hydraulic Driven Abrasive Vegetable

Lot #580 (Sale Order 580 of 239)

Lyco Model 8000 Dual 8 Roll Continuous Hydraulic Driven Abrasive Vegetable Peeler. (8) 72 in Long x Approx 5 in Diameter Rolls on Each Side. 73 in Infeed Height with 24 in L x 15 in W Feed Chute, 20 in Diameter Discharge Screw Auger, Discharge Height 48 in, 18 in L x 6.5 in W Center Bottom Water and Peel Discharge on Each Side with 27 in Discharge Height. S/S Frame and Covers.

Fairbanks Model 3400 5,000 Pound Capacity Platform Scale with 48 in x 48 in Fairbanks Model 3400 5,000 Pound Capacity Platform Scale with 48 in x 48 in

Fairbanks Model 3400 5,000 Pound Capacity Platform Scale with 48 in x 48 in

Lot #582 (Sale Order 582 of 239)

Fairbanks Model 3400 5,000 Pound Capacity Platform Scale with 48 in x 48 in Platform and Model FB2250 Wall Mounted Digital Display

Fedco Model SS123COS Stainless Steel Spin Disk Coater. The Spin Disk Coater Fedco Model SS123COS Stainless Steel Spin Disk Coater. The Spin Disk Coater

Fedco Model SS123COS Stainless Steel Spin Disk Coater. The Spin Disk Coater

Lot #584 (Sale Order 584 of 239)

Fedco Model SS123COS Stainless Steel Spin Disk Coater. The Spin Disk Coater Accurately Sprays Solutions Ranging From a Fine Mist to a Heavy Coating to the Top, Bottom and Sides of a Wide Variety of Products. (3) 8 Inch Diameter Spinning Disks (2) Above Conveyor, (1) Below with 3/8 in Diameter Inlets and 1/6 HP Drives. 36 in L x 8 1/2 in in W Banjo Belt Conveyor. 11 3/4 in Diameter x 7 in Deep S/S Product Tank with Filter Basket and Cover with 3 in Diameter Top Tri Clamp Inlet. Complete with Waukesha Model 18 1 HP S/S Positive Displacement Pump, S/S Mounted Control Panel, 1/2 HP Conveyor Drive, Mounted on Portable S/S Frame with Casters. 480V, 3 Ph, 60 Hz.

Great Lakes Model MSD122260 S/S Heat Shrink Tunnel. 60 in L Tunnel with 22 Great Lakes Model MSD122260 S/S Heat Shrink Tunnel. 60 in L Tunnel with 22

Great Lakes Model MSD122260 S/S Heat Shrink Tunnel. 60 in L Tunnel with 22

Lot #586 (Sale Order 586 of 239)

Great Lakes Model MSD122260 S/S Heat Shrink Tunnel. 60 in L Tunnel with 22 in W x 12 in H Opening. 20 Inch Wide x 72 in L Cloth Mesh Belt. Variable Speed Conveyor at 0-109 Feet Per minute. One Heat Zone with Two 1/2 HP Fans. Watlow Series 965 Digital Temperature Controller. 36 in Discharge Height. S/S Body and Frame. 480 V, 3 Ph, 60 Hz, 28 Amp, 21 kw.

Taylor Products Super Sack Jumbo Bulk Bag Unloader with 1 Ton Hoist. Approx Taylor Products Super Sack Jumbo Bulk Bag Unloader with 1 Ton Hoist. Approx

Taylor Products Super Sack Jumbo Bulk Bag Unloader with 1 Ton Hoist. Approx

Lot #588 (Sale Order 588 of 239)

Taylor Products Super Sack Jumbo Bulk Bag Unloader with 1 Ton Hoist. Approximate 13 Foot Height. 10 ft H S/S Frame Mounted on 3 ft H C/S Base. Duff Norton Model ELC2001 (1) Ton Capacity Electric Chain Hoist with Pendant Controls. 4 Point Bag Lift. (2) Four Foot Long Sliding Bars on Base Frame, 20 in Width Between Bars. Bolt Together Frames. 120 V, 1 Ph, 60 Hz.

Orics Model S30 Inline Tray/Cup Sealer with Orics Model VFND1603 stainless Orics Model S30 Inline Tray/Cup Sealer with Orics Model VFND1603 stainless

Orics Model S30 Inline Tray/Cup Sealer with Orics Model VFND1603 stainless

Lot #590 (Sale Order 590 of 239)

Orics Model S30 Inline Tray/Cup Sealer with Orics Model VFND1603 stainless steel (3) head piston filler with 20 in Diameter S/S Hopper. Setup to run (3) across large oval trays 7 3/4 in L x 5 1/4 in W. Complete set change of parts for small oval 5 3/4 in L x 3 3/4 in W. AC Servo Drive, Speeds up to 30 cycles per minute. Power Requirment: 3 phase, 460 volt, 15 amps, 90 psi, 20 cfm. Complete with Orics Model VFND1603 stainless steel (3) head piston filler with 20 in Diameter S/S Hopper.

Reiser Ross S/S 3-Lane (setup for 8in x 10in Trays) Modified Atmosphere Inp Reiser Ross S/S 3-Lane (setup for 8in x 10in Trays) Modified Atmosphere Inp

Reiser Ross S/S 3-Lane (setup for 8in x 10in Trays) Modified Atmosphere Inp

Lot #591 (Sale Order 591 of 239)

Reiser Ross S/S 3-Lane (setup for 8in x 10in Trays) Modified Atmosphere Inpack Tray Sealer with OTBX96 Reciprocating Conveyor Feeder, Shuttle Conveyor, Tray Elevator, Discharge Single Filer, Arm Mounted Color Touch Screen Operator Controller (can store up to 10 user define programs), Etc. Air requirement: 40 PSI, Gas: 45PSI min to 125 PSI max, Electrical 3/50/60/460, Unit uses remote vacuum source (not included) The line of Ross Inpack S Series Tray Sealers produce modified atmosphere packages utilizing preformed trays in any size or shape for fresh, refrigerated, retort or frozen food products. The Ross Inpack S Series machines are automatic tray sealers specially designed for modified atmosphere packages (MAP) and can handle a wide variety of tray sizes and materials. Ross MAP systems produce attractive packages with greater seal integrity, design flexibility, and extended shelf life. The S Series are robust, heavy duty, medium-to-high-speed modified atmosphere packaging machines offering exceptional flexibility in programming, tooling and product types packaged. Using preformed barrier trays and lidding films, the S Series produces the industrys leading hermetically sealed, tamper-evident, leak-proof packages. The machines are built entirely of stainless steel for easy washdown and the highest levels of hygiene. The S Series provides consistent package seals that you can depend on. Sealing time, pressure and temperature are all monitored and controlled, ensuring high-quality, hermetically sealed packages every time. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Fleetwood Goldco 10 ft L S/S Single Level Steam Pre Heat Tunnel. Pre Heats Fleetwood Goldco 10 ft L S/S Single Level Steam Pre Heat Tunnel. Pre Heats

Fleetwood Goldco 10 ft L S/S Single Level Steam Pre Heat Tunnel. Pre Heats

Lot #592 (Sale Order 592 of 239)

Fleetwood Goldco 10 ft L S/S Single Level Steam Pre Heat Tunnel. Pre Heats Containers Before Filling. 6 5/8 in W x 19 in Total Height End Openings. Openings Width is Tapered, 6 5/8 in W up to 11 1/4 in H and Then Tapered Down to 3 1/2 in W at Top. Double Wall Insulation on All Sides of Heating Zone. Yokogawa Model UT350 Digital Temperature Controller. (4) 40 in W x 13 1/2 in H Access Openings with Covers, 2 on Each Side. (3) 12 in W x 7 in H Side Drains with Clamp Down Doors, 2 on Controls Side, 1 on Other Side. Steam Valve and Piping, 6 in Diameter Vents on Duct Hood. Required Steam Pressure 80 PSI. Overall Length 12 ft. 2 ft 10 in Overall Width. 120 V, 1 Ph, 60 Hz.

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In

Lot #593 (Sale Order 593 of 239)

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere Inpack Tray Sealer with OTBX96 Reciprocating Conveyor Feeder, Shuttle Conveyor, Tray Elevator, Discharge Single Filer, Arm Mounted Color Touch Screen Operator Controller (can store up to 10 user define programs), Etc. Air requirement: 40 PSI, Gas: 45PSI min to 125 PSI max, Electrical 3/50/60/460, Unit uses remote vacuum source (not included) The line of Ross Inpack S Series Tray Sealers produce modified atmosphere packages utilizing preformed trays in any size or shape for fresh, refrigerated, retort or frozen food products. The Ross Inpack S Series machines are automatic tray sealers specially designed for modified atmosphere packages (MAP) and can handle a wide variety of tray sizes and materials. Ross MAP systems produce attractive packages with greater seal integrity, design flexibility, and extended shelf life. The S Series are robust, heavy duty, medium-to-high-speed modified atmosphere packaging machines offering exceptional flexibility in programming, tooling and product types packaged. Using preformed barrier trays and lidding films, the S Series produces the industrys leading hermetically sealed, tamper-evident, leak-proof packages. The machines are built entirely of stainless steel for easy washdown and the highest levels of hygiene. The S Series provides consistent package seals that you can depend on. Sealing time, pressure and temperature are all monitored and controlled, ensuring high-quality, hermetically sealed packages every time. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Shanklin Model HS1H Hi-Speed Automatic Shrink Wrapper with Side and End Sea Shanklin Model HS1H Hi-Speed Automatic Shrink Wrapper with Side and End Sea

Shanklin Model HS1H Hi-Speed Automatic Shrink Wrapper with Side and End Sea

Lot #594 (Sale Order 594 of 239)

Shanklin Model HS1H Hi-Speed Automatic Shrink Wrapper with Side and End Sealer. Minimum Package Size 1/2 in W x 1/8 in H x 3 in L. Maximum Package Size 16 in W x 6 in H x 60 in L. Width and Height Combination Cannot Exceed Maximum Film Width. Maximum Film Width 22 in Folded, 44 in Flat. 100 Packages Per Minute Minimum Speed, Maximum Speed Dependent on Product and Package. Film Speed of 120 Linear Feet Per Minute Maximum. Shanklin Manually Adjustable Harmonic Infeed with 21 in L x 4 in Vertical Carry Belts. 13 in L Side Seal. 31 in L Discharge Section with Twin 7 1/2 in W Vinyl Belts. 19 in L Seal Jaws. Digital Side and End Seal Temperature Controls. CTC Parker Automation Digital Touch HMI. American Fan Co Model TC10, 23 in Diameter x 43 in H Scrap Collection Bin with 1 HP Blower. 230 V, 1 Ph, 60 Hz, 60-90 PSI.

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In

Lot #595 (Sale Order 595 of 239)

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere Inpack Tray Sealer, Discharge Single Filer, Arm Mounted Color Touch Screen Operator Controller (can store up to 10 user define programs), Etc. Air requirement: 40 PSI, Gas: 45PSI min to 125 PSI max, Electrical 3/50/60/460, Unit uses remote vacuum source (not included). The line of Ross Inpack S Series Tray Sealers produce modified atmosphere packages utilizing preformed trays in any size or shape for fresh, refrigerated, retort or frozen food products. The Ross Inpack S Series machines are automatic tray sealers specially designed for modified atmosphere packages (MAP) and can handle a wide variety of tray sizes and materials. Ross MAP systems produce attractive packages with greater seal integrity, design flexibility, and extended shelf life. The S Series are robust, heavy duty, medium-to-high-speed modified atmosphere packaging machines offering exceptional flexibility in programming, tooling and product types packaged. Using preformed barrier trays and lidding films, the S Series produces the industrys leading hermetically sealed, tamper-evident, leak-proof packages. The machines are built entirely of stainless steel for easy washdown and the highest levels of hygiene. The S Series provides consistent package seals that you can depend on. Sealing time, pressure and temperature are all monitored and controlled, ensuring high-quality, hermetically sealed packages every time. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Highlight Predator High Profile Pallet Stretch Wrapper with 80 in Wrap Height. Highlight Predator High Profile Pallet Stretch Wrapper with 80 in Wrap Height.

Highlight Predator High Profile Pallet Stretch Wrapper with 80 in Wrap Height.

Lot #596 (Sale Order 596 of 239)

Highlight Predator High Profile Pallet Stretch Wrapper with 80 in Wrap Height. Scale, Cynch Attachment. (Located At: 9000 Science Center Drive, New Hope, MN 55428)

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere In

Lot #597 (Sale Order 597 of 239)

Reiser Ross S/S 2-Lane (setup for 10in x 12in Trays) Modified Atmosphere Inpack Tray Sealer with Reciprocating Conveyor Feeder, Shuttle Conveyor, Tray Elevator, Discharge Single Filer, Arm Mounted Color Touch Screen Operator Controller, Etc. The line of Ross Inpack S Series Tray Sealers produce modified atmosphere packages utilizing preformed trays in any size or shape for fresh, refrigerated, retort or frozen food products. The Ross Inpack S Series machines are automatic tray sealers specially designed for modified atmosphere packages (MAP) and can handle a wide variety of tray sizes and materials. Ross MAP systems produce attractive packages with greater seal integrity, design flexibility, and extended shelf life. The S Series are robust, heavy duty, medium-to-high-speed modified atmosphere packaging machines offering exceptional flexibility in programming, tooling and product types packaged. Using preformed barrier trays and lidding films, the S Series produces the industrys leading hermetically sealed, tamper-evident, leak-proof packages. The machines are built entirely of stainless steel for easy washdown and the highest levels of hygiene. The S Series provides consistent package seals that you can depend on. Sealing time, pressure and temperature are all monitored and controlled, ensuring high-quality, hermetically sealed packages every time. (Located at 518 Reimann Avenue, Sandwich, IL 60548)

Doboy Model J Horizontal Flow Through Wrapper with Film Registration and Fi Doboy Model J Horizontal Flow Through Wrapper with Film Registration and Fi

Doboy Model J Horizontal Flow Through Wrapper with Film Registration and Fi

Lot #598 (Sale Order 598 of 239)

Doboy Model J Horizontal Flow Through Wrapper with Film Registration and Fin Seal, Including Thiele Model 34BWAJ4B Rotary Vacuum Placer. Maximum Capacity of Up to 400 PPM, 9 in Wide Seal Bars with 1 Up Configuration (Capable of 4 Up with Change Parts). 15 ft L Lugged Chain Infeed, 12 in Lug Centers, S/S Adjustable Width Tension Bars. Maximum Product Size is 16 in L x 7 in W x 2 3/4 in H. Minimum Package Size 4 in L x 1/2 in W x up to 2 3/4 in H. Web Width Up to 20 in x 16 in Diameter. 3 Wheel Fin Seal, 9 in W Horizontal Seal Bars, 7 1/2 in W x 30 in L Discharge Conveyor with Rubber Belt, Left to Right Machine Configuration. 240 V, 3 Ph, 60 Hz, 60 PSI at .1 CFM Air Requirement. Includes Thiele Model 34BWAJ4B Rotary Vacuum Placer Leaflet Feeder/Coupon Placer. (S/N 10435)  (1999). Feed Magazines: (3) 20 in. L, (Currently Set For 2 Lanes) Frame Width: 34 in. W. Product Size Range: 1in x 1in – 6 in x 6 in. Coupons 2 in x 2 in x 1/4 in – 5 in x 6 in x 1 in. Trays or Plates. Approx. Speed Up To 600 Placements Per Minute, Up To 200 Per Minute w/ Trays Or Plates. Air Requirement: 60 To 80 PSI. Vacuum Pump 220V, 3 Ph, 60 Hz. Approx. Overall Size: 6ft. L X 4ft. W X 7ft. H.

Shanklin Model F1 Flow Through Shrink Wrapper. 19 in L Horizontal Sealing B Shanklin Model F1 Flow Through Shrink Wrapper. 19 in L Horizontal Sealing B

Shanklin Model F1 Flow Through Shrink Wrapper. 19 in L Horizontal Sealing B

Lot #600 (Sale Order 600 of 239)

Shanklin Model F1 Flow Through Shrink Wrapper. 19 in L Horizontal Sealing Bar, 12 in L Side Seal with Vacuum Scrap Removal.  Minimum Package Size 1/2 in W x 1/8 in H x 4 in L. Maximum Package Size 16 in W x 6 in H x Infinite Length. Maximum Film Width 22 in Folded or 44 in Flat. 50 PPM Maximum Speed. 60 Linear Feet Per Minute Max Film Speed. 12 1/2 in W x 34 in L Infeed Section with Vinyl Belt. 28 in W Film Rollers. 22 in L Discharge Section with Twin 5 1/2 in W Vinyl Belts. Shanklin Model F0241 Centerfolder Attachment. American Fan Co Model TC10 23 in Diameter x 43 in H Scrap Collection Bin with 1 HP Blower. Shanklin HMI. 230/480 V (wired 480 V), 1 Ph, 60 Hz, 20 Amp, 90 PSI Maximum, 60 PSI Minimum Air.

Shanklin Model F3 Horizontal Flow Wrapper, 13 in W x 32 in L Rubber belt in Shanklin Model F3 Horizontal Flow Wrapper, 13 in W x 32 in L Rubber belt in

Shanklin Model F3 Horizontal Flow Wrapper, 13 in W x 32 in L Rubber belt in

Lot #602 (Sale Order 602 of 239)

Shanklin Model F3 Horizontal Flow Wrapper, 13 in W x 32 in L Rubber belt infeed, 6 in W x 3 in H forming box, 11 1/4 in W x 32 in L Rubber Vacuum belt, 18 in L horizontal seal bar, 12 in W x 19 in L outfeed belt. Chargemaster Simco Industrial Static Control, It Accepts Product Randomly Spaced & Establishes Correct Product Spacing. A Powered Film Dispenser Feeds Film To A Forming Head Which Wraps The Film Around The Product. A Continuous Overlap Static Seal Is At The Forming Head. An End Seal

PFM Sierra Flow Through 9 in W Fin Seal Registered Film Wrapper, 1 Up with PFM Sierra Flow Through 9 in W Fin Seal Registered Film Wrapper, 1 Up with

PFM Sierra Flow Through 9 in W Fin Seal Registered Film Wrapper, 1 Up with

Lot #604 (Sale Order 604 of 239)

PFM Sierra Flow Through 9 in W Fin Seal Registered Film Wrapper, 1 Up with 9 in L Seal Bar, 8 foot long infeed table with flat blade lugged chain, 10 inch centers, adjustable width currently set at 4.5 inches, package size range: length 2 in to18 in, width 1/2 in to 9 in, height up to 2 3/4 in, film registration, 2 in diameter film roll core, 9 in W x 24 in L vinyl belt discharge conveyor, Manual crank adjusters for width. 220 V, 1 Ph, 60 Hz, 12 Amp.

Shanklin Model F0392 Single Roll Center Folder For Flat Film. 49 in L Upper Shanklin Model F0392 Single Roll Center Folder For Flat Film. 49 in L Upper

Shanklin Model F0392 Single Roll Center Folder For Flat Film. 49 in L Upper

Lot #606 (Sale Order 606 of 239)

Shanklin Model F0392 Single Roll Center Folder For Flat Film. 49 in L Upper and Lower Film Rollers. 24.5 in L Top Roller. Triangle Plate Dimensions 49 in L at Bottom and 24 in L at Top. 27 1/2 in H (5) Roll Stack. Height Adjustable Feet. 110V.

GHL Model PP5300 Fully Automatic 40 ppm L Bar Sealer and Shrink Tunnel with GHL Model PP5300 Fully Automatic 40 ppm L Bar Sealer and Shrink Tunnel with

GHL Model PP5300 Fully Automatic 40 ppm L Bar Sealer and Shrink Tunnel with

Lot #608 (Sale Order 608 of 239)

GHL Model PP5300 Fully Automatic 40 ppm L Bar Sealer and Shrink Tunnel with Siemens Controls. 30 program memory and Vertical Seal Head Design for increased machine speeds up to 40 PPM and increased package height up to 5 inches. The new PP5300 combination fully automatic L sealer and tunnel is built on the same frame. Siemens PLC touch controls, variable speed drive for tunnel conveyor and blower, 0 to 95 FPM, product staging, multi pack option, automatic product clearing, jam alarm, motorized scrap windup with alarm, pinwheel hole punch, single piece 17 in x 20 in hot knife seal bars with 10 3/4 in W x 27 in L vinyl belt, 12 in W x 39 in L wrapper vinyl infeed conveyor belt, 38 in L heat shrink tunnel with 17 1/2 in W x 8 3/4 in H useable opening (12 in total opening height) and bar style belting, 27 1/2 in W film rolls, C/S frame with casters. 230 V, 3 Ph, 60 Hz. 80 PSI.

Arpac Model 11536 Automatic Inline Shrink Bundler with Heat Shrink Tunnel. Arpac Model 11536 Automatic Inline Shrink Bundler with Heat Shrink Tunnel.

Arpac Model 11536 Automatic Inline Shrink Bundler with Heat Shrink Tunnel.

Lot #612 (Sale Order 612 of 239)

Arpac Model 11536 Automatic Inline Shrink Bundler with Heat Shrink Tunnel. 27 in W x 42 in L Straight Line Infeed with Plastic Interlocking Chain Conveyor. 38 in L Heat Seal Bar. 83 in L Heat Shrink Tunnel with Two Heat Zones and 27 in W Plastic Interlocking Chain Conveyor, 15 in H x 38 in W Tunnel Openings, Over Belt Cooling Blower at Discharge with Case Orientating Rollers. Allen Bradley ALC 500 CPU. 460 V, 3 Ph, 60 Hz.

Arpac Model 5528 Straight Infeed Shrink Bundler with Heat Shrink Tunnel. St Arpac Model 5528 Straight Infeed Shrink Bundler with Heat Shrink Tunnel. St

Arpac Model 5528 Straight Infeed Shrink Bundler with Heat Shrink Tunnel. St

Lot #614 (Sale Order 614 of 239)

Arpac Model 5528 Straight Infeed Shrink Bundler with Heat Shrink Tunnel. Straight Infeed with Left to Right Configuration. 10 3/4 in H Clearance From Belt to Bottom of Upper Seal Bar. 21 in Wide Width Clearance. Upper and Lower Film Feed. 17 in L Infeed Section with 19 in W Roller and 13 in W Rubber Belt. 29 in L Seal Bars. 19 in L Transfer Conveyor with 13 in W Rubber Belt. 50 in L Single Zone Heat Shrink Tunnel. 27 1/2 in W x 15 in H Tunnel Openings. 23 3/4 in W Vinyl Conveyor Belt. 12 in L Discharge Area. Over Belt Cooling Fan. Omron Model E5CS Digital Seal Bar Temperature Control. Analog Tunnel Temperature Control. C/S Frame. 460 V, 3 Ph, 60 Hz.

Arpac Model 10828BTW Bundler w/ Inline Dual Zone Shrink Tunnel. Bundler: 10 Arpac Model 10828BTW Bundler w/ Inline Dual Zone Shrink Tunnel. Bundler: 10

Arpac Model 10828BTW Bundler w/ Inline Dual Zone Shrink Tunnel. Bundler: 10

Lot #616 (Sale Order 616 of 239)

Arpac Model 10828BTW Bundler w/ Inline Dual Zone Shrink Tunnel. Bundler: 10 in W x 3 1/2 ft L Delrin Conveyor Side Infeed,  12 in W x 5 in H pnuematic product main ram, 12 in W x 5 in H step back product stop,  Set Up With 21 in W Film (30 in W max capacity), 28 in W Horizontal Seal Bar, 14 in L x 3 in W  pnuematic top hold down,  Swing arm film hoist with 500 Lb capacity Coffing winch, Includes 80 in L Dual Heat Zone Shrink Tunnel with 30 in W x 15 in H Opening and (2) 1 HP Blower Motors, 10 1/2 ft L x 29 in W Plastic mesh Chain Conveyor, 18 in H Cooling Blower with 1 HP Motor, 460 V, 3 Ph, 60 Hz, 60 Amp., C/S Frame, PLC AB SLC 5/04

Arpac Model 105TW28 Automatic Shrink Bundler with Heat Shrink Tunnel, Film Arpac Model 105TW28 Automatic Shrink Bundler with Heat Shrink Tunnel, Film

Arpac Model 105TW28 Automatic Shrink Bundler with Heat Shrink Tunnel, Film

Lot #618 (Sale Order 618 of 239)

Arpac Model 105TW28 Automatic Shrink Bundler with Heat Shrink Tunnel, Film Feed Rack and Splicer. Approx 36 Wraps Per Minute. Capable of Running Product Sizes of 6-18 Inches Wide x 7-20 Inches Long x 2-10 Inches High. 20 in W x 69 in L Roller Infeed Conveyor with Pacing Gate. 29 in Wide Heat Seal Bar. Includes 70 in L Heat Shrink Tunnel with 32 in W x 18 in H Openings, 29 in W Plastic Interlocking Chain Conveyor. 3-Way Over Belt Cooling Blower at Discharge. Allen Bradley SLC5/04 CPU with Arpac Digital Touch Controls. Omron Model E5CS Digital Temperature Controllers For Tunnel and Seal Bar. 460 V, 3 Ph, 60 Hz.

Arpac Model 10832 Shrink Bundler with Heat Shrink Tunnel. Arpac Automatic S Arpac Model 10832 Shrink Bundler with Heat Shrink Tunnel. Arpac Automatic S

Arpac Model 10832 Shrink Bundler with Heat Shrink Tunnel. Arpac Automatic S

Lot #620 (Sale Order 620 of 239)

Arpac Model 10832 Shrink Bundler with Heat Shrink Tunnel. Arpac Automatic Shrink Bundler with Right Angle Infeed, Retractable Flaps to Control Product Indexing, Pneumatic Ram Pusher with 9 in x 4 in Plate. Perforation Assembly, 33 in L Heat Seal Bar. 24 in W x 16 in L Plastic Interlocking Chain Conveyor Infeed Into Shrink Tunnel. 7 ft L Shrink Tunnel with Two Heat Zones, 28 in W Vinyl Conveyor Belt, 15 in H x 35 in W Tunnel Openings. 30 in L Discharge Conveyor with Over Belt Cooling Blower. Digital Temperature Controls For Seal Bar and Tunnel Zones. Allen Bradley Digital Touch HMI. C/S Frame with Casters. Allen Bradley SLC 5/02 CPU. 460 V, 3 Ph, 60 Hz.

Promark Model CV1000 S/S Continuous Vacuum Packaging Machine. Stainless Ste Promark Model CV1000 S/S Continuous Vacuum Packaging Machine. Stainless Ste

Promark Model CV1000 S/S Continuous Vacuum Packaging Machine. Stainless Ste

Lot #622 (Sale Order 622 of 239)

Promark Model CV1000 S/S Continuous Vacuum Packaging Machine. Stainless Steel Construction. Speed of 3-5 Cycles Per Minute. 41 in L Seal Bar Length. 43 3/4 in L x 19 in W x 6.9 in D Chamber. Gas Flush Capabilities. 48 in W Vinyl Belt. Adjustable Tilting Deck up to a Maximum of 24 Degrees. 230 V, 3 Ph, 60 Hz. Busch Model RAO30505Z61006 Vacuum Pump, 180 CFM Displacement, 0.5 Torr Vacuum, 460 V. Recommended Packaging Material NY/LDPE.