The Auction Mill Auction Catalog - High Quality Professional Woodworking Equipment Online Auctions

DELTA, Universal Tenon cutting Jig. Fits all table saws with a standard miter gauge slot.

Lot #1 (Sale Order 1 of 72)

DELTA, Universal Tenon cutting Jig. Fits all table saws with a standard miter gauge slot. Cuts straight and angled tenons.

ROCKLER, Model GRP 5876-1 JIG IT Shelving Jig w/Self Centering 1/4" bit.

Lot #2 (Sale Order 2 of 72)

ROCKLER, Model GRP 5876-1 JIG IT Shelving Jig w/Self Centering 1/4in bit. Drills holes either 1 7/16in or 2 1/2in from edge. Shelving Jig measures.19? long and has two storage compartments for self centering bit and hex wrench.

AKEDA, Dove Tail Jig, Model DC16

Lot #3 (Sale Order 3 of 72)

AKEDA, Dove Tail Jig, Model DC16, complete set with all pin and tail cutting details along with the standard router bits and the optional AKEDA router bit set for both through and half blind dovetail joints. The set also includes the optional waste collection feature. The jig requires using a router that will accept 1/4" shank router bits and a precision 7/16" guide bushing. All the accessory parts are housed in a custom made wooden box. This system makes making repeatable dovetails with a minimum of setup. A very complete and easy to follow instruction book is included.

WOODSMITH Scraper Sharpening Jig.

Lot #4 (Sale Order 4 of 72)

WOODSMITH Scraper Sharpening Jig. The Woodsmith cabinet scraper system offers a fool-proof method for getting a consistent, razor-sharp edge using only a few simple tools. The secret is in the Woodsmith jig-a unique tool that lets you file the edge and then create the bur. Cabinet scraper system includes: 3" x 6" steel scraper. sharpening jig with mounting screws. Comes with a Nicholson file, and a total of (7) scrapers.

DEWALT, Plate Joiner (Bisket Cutter), Model DW682.

Lot #5 (Sale Order 5 of 72)

DEWALT, Plate Joiner (Bisket Cutter), Model DW682. Cuts slots for #20, #10, & #0 flat biskets. Includes dust collection port and attachment. Fence is adjustable for height, depth and angle. Makes bisket slots for frame joints, edge to edge joints, “T” joints, corner joints edge miter joints, and offset joints.

SIOUX, Model 8005ES, 45 deg. Offset Head, Variable speed, reversible Drill / Sander

Lot #6 (Sale Order 6 of 72)

SIOUX, Model 8005ES, 45 deg. Offset Head, Variable speed, reversible Drill / Sander with 3/8” keyed chuck. 120 volt, 0 – 2500 R.P.M. Comes with a chunk key and an assortment of 3” hook and loop sanding disks and a hook and loop sanding pad with 1/4” shank.

PORTER-CABLE, Profile Sander Kit, Model 444VS sander with dust collection

Lot #7 (Sale Order 7 of 72)

PORTER-CABLE, Profile Sander Kit, Model 444VS sander with dust collection feature , (12) sanding profiles, hook & loop system for flat sanding . The profile pieces are used with adhesive backed 2 1/4" sandpaper roles. For flat sanding into tight places use Porter-Cable hook & loop sanding pads on the included holder.

TOOL SHOP, Multi-Purpose cutting tool kit

Lot #8 (Sale Order 8 of 72)

TOOL SHOP, Multi-Purpose cutting tool kit. Holds 1/8” shank spiral shank cutting bits, and has a ¼ chuck for use with 1/4” router bits. Has a mini Plunge Router Base with a bevel feature, Sole Plate Bracket, Straight Guide Assembly and Trimmer Guide Assembly with roller bearing follower and a Circle Cutting Gage. Similar to a “Roto-Tool”.

CHICAGO ELECTRIC, Mode 44914 1/4” Trim Router. Near new condition

Lot #9 (Sale Order 9 of 72)

CHICAGO ELECTRIC, Mode 44914 1/4” Trim Router. Near new condition. Use with any 1/4” shank router bit. Comes complete with Straight Guide Assembly and Trimmer Guide Assembly with roller bearing follower. SHAPER CUTTERS AND OTHER ACCESSORIES

CHICAGO ELECTRIC MOTOR. 1 H.P. Compressor Duty, model 1PF56B34D145A

Lot #10 (Sale Order 10 of 72)

CHICAGO ELECTRIC MOTOR. 1 H.P. Compressor Duty, model 1PF56B34D145A, type B, thermally protected, 115v / 205 – 230v (presently wired for 115v operation) frame type 556. Made in the United States.

PORTER-CABLE, Model CDA250 “Bammer” Cordless Finish Nail Gun, fuel cell powered, uses 15ga Nails

Lot #11 (Sale Order 11 of 72)

PORTER-CABLE, Model CDA250 “Bammer” Cordless Finish Nail Gun, fuel cell powered, uses 15Gage finish nails. Fastener length: Min. 1 ¼”, Max. 2 1/2”. Includes case, two fuel cells and a few nails. Also included is a AIRSOFT Propane Adapter so that you can refill the fuel cells yourself using inexpensive disposable propane cylinders of the type you would use with a camp stove or lantern.

FREUD, 8” Super Dado Set, Model SD508

Lot #12 (Sale Order 12 of 72)

FREUD, 8” Super Dado Set, Model SD508. Heavy duty carbide tipped blades and chippers. Has two 24 tooth cutters and six four tooth chippers. The teeth on the cutters and chippers overlap giving a smooth bottom dado or rabbit. Shim pack allows for fine tuning the dado with. Comes with plastic case with plastic blade separators.

FREUD CARBIDE TIPPED SHAPER CUTTERS, DOOR SYSTEM (UC-900-213)

Lot #13 (Sale Order 13 of 72)

FREUD CARBIDE TIPPED SHAPER CUTTERS, DOOR SYSTEM (UC-900-213) Boxed set includes 4 3/4” dia. Raised Panel Cutter, Rail & Style Cutter Set, Door Lip Cutter, Glue Joint Cutter. Cutters come ready to use on 3/4” shaper spindles and complete set of adapters to allow the set to be used with 1/2” spindle spindles. Made in Italy.

SHAPER MOLDING HEAD CUTTER SET

Lot #14 (Sale Order 14 of 72)

SHAPER MOLDING HEAD CUTTER SET. Set consists of one dual cutter, taper locking molding head, 3 1/4” dia. x 2” tall for use with 3/4” shaper spindle and (13) sets of dual high speed steel molding head cutters. 8000 max spindle R.P.M. Includes plastic case and locking wrench.

CARBIDE DUAL RADIUS CARBIDE SHAPER CUTTER

Lot #15 (Sale Order 15 of 72)

CARBIDE DUAL RADIUS CARBIDE SHAPER CUTTER. 3/4” bore, 3” dia. 1/2” radius on one side and 1/4” radius on the other.

JESADA LOCK MITER ROUTER BIT, CARBIDE. Model 655-503

Lot #16 (Sale Order 16 of 72)

JESADA LOCK MITER ROUTER BIT, CARBIDE. Model 655-503, 1/2” shank, 3” dia 7/16” tall. Not for use with hand held router!!

MISSION STYLE CARBIDE RAISED PANEL CUTTER.

Lot #17 (Sale Order 17 of 72)

MISSION STYLE CARBIDE RAISED PANEL CUTTER. 3/4” bore, 4 5/8” dia., 15 deg. face cut, 1 1/2” long cutter length.

CARBIDE SLOT CUTTER SET. 3/4” bore, 2 3/4” dia. cutter height is 3/8”

Lot #18 (Sale Order 18 of 72)

CARBIDE SLOT CUTTER SET. 3/4” bore, 2 3/4” dia. cutter height is 3/8”. When stacked together the cutter height is 3/4”.

WOODWORKERS CHOICE DRAWER LOCK ROUTER BIT, CARBIDE 1/2” shank, 2” dia. 1/2” tall.

Lot #19 (Sale Order 19 of 72)

WOODWORKERS CHOICE DRAWER LOCK ROUTER BIT, CARBIDE. 1/2” shank, 2” dia. 1/2” tall. For stock 1/2” to 3/4” thick. Not for use with hand held router!!

UP-SPIRAL, ROUTER BIT, HSS, 1/2” dia. x 2” cutter length, 4 3/4” overall length

Lot #20 (Sale Order 20 of 72)

UP-SPIRAL, ROUTER BIT, HSS, 1/2” dia. x 2” cutter length, 4 3/4” overall length, with two ½' dia. guide bearings.

ROMAN CARBIDE, FINGER PULL ROUTER BIT, 1/2” shank, 1” dia.

Lot #21 (Sale Order 21 of 72)

ROMAN CARBIDE, FINGER PULL ROUTER BIT, 1/2” shank, 1” dia.

PACIFIC RACK & MACHINE, Precision Height and Angle Setting Gauges, one of each in this boxed set

Lot #22 (Sale Order 22 of 72)

PACIFIC RACK & MACHINE, Precision Height and Angle Setting Gauges, one of each in this boxed set. The Blade Gage ll uses a saw blade or router bit to complete an electrical circuit to illuminate the LED light when the correct height adjustment is made. The Angle Perfect ll uses the saw blade to complete an electrical circuit to illuminate the LED light when the saw blade is adjusted to a perfect 45 deg or 90 deg.. Each gauge has a magnetic base to keep them securely attached to the saw table top during adjustment. Accessories included.

DELTA, Hollow Chisel Mortiser, (Model 14-650 Type 2)

Lot #23 (Sale Order 23 of 72)

DELTA, Hollow Chisel Mortiser, (Model 14-650 Type 2), with 3/8” and ½” square mortise chisel bits, chuck key and hex wrench. Equipped with a Rockler adjustable table. Also included is a ROCKLAR 3-Piece Sharpening Set for Hollow Mortising Chisels.

ECOGATE, (Model EG101) Eight Channel Automatic Dust Collection Gate System.

Lot #24 (Sale Order 24 of 72)

ECOGATE, (Model EG101) Eight Channel Automatic Dust Collection Gate System. The Ecogate system provides automatic opening and closing of connected dust collection gates. When ever one of the machines connected to a controlled gate is running, a Vibration Sensor attached to the machines motor, or a Toridal Sensor, attached around a power lead, closed a circuit to signal the control module to close all other gates and open the gate to the machine that is running. The system also automatically turns on and off the dust collector. Comes with (4) automatic gates, (4) Vibration Sensors, one optional Toroidal Sensor and (1) optional manual on / off switch. The dust collector can also be manually turned on and off and gates opened or closed from the green control box. The system can be expanded to up to (8) automatically controlled gates with the purchase of additional gates).

DELTA, 12” Portable Planer, Model 22-540, 12” x 5.9” capacity.

Lot #25 (Sale Order 25 of 72)

DELTA, 12” Portable Planer, Model 22-540, 12” x 5.9” capacity. Comes with two feed tables and chip collector hood with 4” dia. outlet. Also included are (2) extra sets of planer blades (one set resharpened and one new set) and the blade setting fixture. Good running condition.

INCRA, 25” Twin Linear Dual Carriage, Dual Split Fence.

Lot #26 (Sale Order 26 of 72)

INCRA, 25” Twin Linear Dual Carriage, Dual Split Fence. A very precision fence that can be used on table saws, router tables or shapers. Micrometer adjustable make exacting work possible. Comes complete with a Incra Shop Stop, and the sliding table and the Incra Master Reference Guide and Template Library.

INCRA, Miter 5000 Table Saw Sled.

Lot #27 (Sale Order 27 of 72)

INCRA, Miter 5000 Table Saw Sled. Used with your table saw to make precision crosscut and miter cuts. The precision protractor head rotates 90 deg. In each direction and is adjustable to within .5 deg. The flip Stop (end stop) is adjustable along the length of the Flip Fence.

PSI WOODWORKING PRODUCTS, Air Cleaning System, Model 465/930

Lot #28 (Sale Order 28 of 72)

PSI WOODWORKING PRODUCTS, Air Cleaning System, Model 465/930. This air cleaner uses a 1/15 H.P. 115 volt motor to draw air through a 12” x 24” washable mesh per-filter before pulling the air into a 12” x 24” x 18' deep internal (3) pocket bag filter. Replacement filters are available from your HVAC supplier.

EXCALIBUR, Model EXBC, Over Arm Blade Cover For Table / Cabinet Saw, with dust collection

Lot #29 (Sale Order 29 of 72)

EXCALIBUR, Model EXBC, Over Arm Blade Cover For Table / Cabinet Saw, with dust collection. It will work with all table saw and fence combinations. Telescoping boom allows the blade cover to be moved out of the way for access when changing blades. The entire blade cover, boom and column can be easily removed at table level in seconds without tools, allowing unrestricted access to extension table work surface. Connects to any 4” dust extraction system and collects dust at the point of origin, directly over the blade, controlling airborne dust in the shop. Fully adjustable, Height above floor 41”min, 59” max. Length of boom 42”min, 72” max. Blade cover (blade guard) 3 1/8” x 17”.

CUSTOM MAKE HORIZONTAL MORTISER MACHINE

Lot #30 (Sale Order 30 of 72)

CUSTOM MAKE HORIZONTAL MORTISER MACHINE. Powered by a ROYBI, 2-H.P. Variable Speed Plunge Router with a 3/8” up-spryle bit. Used primarily to make loose tenon joints in furniture pieces. The machine is made from “Baltic Birch” plywood and is 30” long x 11” deep x 13” high. The table is 30” long x 10” deep x 3” high. The sliding table moves both in and out and horizontally. The table has multiple clamping slots and clamps for holding work. The table also has adjustable stops on both ends and an dust collection port on one end. The router is adjustable vertical by means of a micro adjustment knob providing 1/16” of vertical movement per revelation.

PLANO PC-2 43' CLAMP, VERTICAL GLUE PRESS. Includes Upper Rail and Three Clamps.

Lot #31 (Sale Order 31 of 72)

PLANO PC-2 43' CLAMP, VERTICAL GLUE PRESS. Includes Upper Rail and Three Clamps. Mounts to the wall to save space and always ready to use. Glue-up strong, flat and straight panels erery time. A real workhorse in the shop.

PITTSBURG AUTOMOTIVE, 1.5 Ton Aluminum Low Profile Floor Jack, with Rapid Pump feature.

Lot #32 (Sale Order 32 of 72)

PITTSBURG AUTOMOTIVE, 1.5 Ton Aluminum Low Profile Floor Jack, with Rapid Pump feature. 22 1/2” long x 9 7/16 wide x 3 1/2” saddle height in the down position & 14 1/8” high in the raised position. Very good condition.

DELTA, “B.O.S.S. Bench Oscillating Spindle Sander (Model 31-780) with dust collection port.

Lot #33 (Sale Order 33 of 72)

DELTA, “B.O.S.S. Bench Oscillating Spindle Sander (Model 31-780) with dust collection port. Comes with assortment of (24) new sanding sleeves.

CRAFTSMAN, Model 51871, 5 1/2” Steel Vise. Made in the U.S.A. Has a swivel base and 6” jaw travel

Lot #34 (Sale Order 34 of 72)

CRAFTSMAN, Model 51871, 5 1/2” Steel Vise. Made in the U.S.A. Has a swivel base and a 6” jaw travel.

CRAFTSMAN, Heavy Duty 18” Pipe Wrench, Model 55678, made in the United States.

Lot #35 (Sale Order 35 of 72)

CRAFTSMAN, Heavy Duty 18” Pipe Wrench, Model 55678, made in the United States.

GRR-RIPPER, Model GR-200 universal pushing jig for all table saw, router tale and jointer uses.

Lot #36 (Sale Order 36 of 72)

GRR-RIPPER, Model GR-200 universal pushing jig for all table saw, router tale and jointer uses. This is the only tool that grips and holds BOTH sides of the work piece during ripping operations. (2) complete sets. One set is in near new condition, the other shows some use.

Anti-kickback / Hold Downs/ Used when ripping boards on the table saw or pushing boards through a

Lot #37 (Sale Order 37 of 72)

Anti-kickback / Hold Downs/ Used when ripping boards on the table saw or pushing boards through a shaper or router table. The yellow wheels provide hold down pressure on the boards and rotate only in the counterclockwise direction allow the material to pass freely forward but provide resistance in the event of a kickback. The hold down tension is provided by an adjustable spring attached to the release handles. Usually attached to a table machine's fence but can be attached to the machine table.

BESSEY, Model WS3, Heavy Duty Corner Clamps, set of two.

Lot #38 (Sale Order 38 of 72)

CRAFTSMAN CORNER CLAMP SET, Model #66614, still in original box

Lot #39 (Sale Order 39 of 72)

CRAFTSMAN CORNER CLAMP SET, Model #66614, still in original box. Set contains one 45 deg miter box and corner clamp for cutting 45 deg. miter joints and three corner clamps. Aluminum construction in new condition.

CORNER CLAMP ASSORTMENT, with two LARSON frame or corner clamps still in the box and two STANLY

Lot #40 (Sale Order 40 of 72)

CORNER CLAMP ASSORTMENT, with two LARSON frame or corner clamps still in the box and two STANLY aluminum corner clamps.

TAPERING GAGE, Hand made, fits into the miter slot on your table saw. 12” wide x 37” long.

Lot #41 (Sale Order 41 of 72)

TAPERING GAGE, Hand made, fits into the miter slot on your table saw. 12” wide x 37” long. 9” of taper adjustment at each end, and a 15” long pivoting hold down arm. Made from maple with a plywood base.

PSI Timber Moisture Meter, Model MD9-2G

Lot #42 (Sale Order 42 of 72)

PSI Timber Moisture Meter, Model MD9-2G. Two pin design that reads moisture content of wood from 6% to 24%. Bright LED readout with protective cap.

PEN / PENCIL TURNING KIT (lathe accessories). Two Mandrels with bushings.

Lot #43 (Sale Order 43 of 72)

PEN / PENCIL TURNING KIT (lathe accessories). Two Mandrels with bushings. One mandrel is set-up with 1/2” bushings and the second mandrel is set-up with 3/8” bushings. Comes with an assortment of both wood and plastic pen turning blanks. Also includes (1) “J” and (1) 7/32” drill bits for boring holes in pen blanks. Instructions for turning a Clicker Pencil and a Clicker Pen are included.

ONEWAY, (lathe accessories) 4 Jaw Safety Scroll Chuck, Tallon model with key operation

Lot #44 (Sale Order 44 of 72)

ONEWAY, (lathe accessories) 4 Jaw Safety Scroll Chuck, Tallon model with key operation. Has both Standard Jaw Set and a Spigot Jaw Set. Includes a Woodworm Screw (mounts directly to the chuck), Tallon Geared Key and a hex key wrench. Clamps parts both on external foot or internal recess.

BEALL, (lathe accessories) 3-On Lathe Buffing System.

Lot #45 (Sale Order 45 of 72)

BEALL, (lathe accessories) 3-On Lathe Buffing System. 18? Steel mandrel with #2 Morse Taper to fit into the head-stock of your lathe and three buffs buffs you need to put a final high gloss finish on your projects at one time.