|
Brand name tools all new in the package never opened. All lots have multiple quantities available. The winning bidder will have liberty to purchase additional quantities of his/her winnings at end of auction. Please contact us for more information. |
|
Bolt Cutters (RIDGID) Lot #1 (Sale Order 1 of 1039) Designed for cutting rod, wire mesh, concrete form ties, cable and bolts
Sum head permits cutting close to surface
Quick and easy adjustments through use of cam and bolt mechanism
Hardened alloy steel jaws
Product Specifications
OAL: 44"
Hard: 1/2"
OAL: 44"
Soft: 11/16"
Med: 9/16"
Med: 9/16"
Soft: 11/16"
Hard: 1/2"
|
|
|
Center Cut Bolt Cutters (H.K. Porter) Lot #2 (Sale Order 2 of 1039) Industrial grade cutter features drop forged, precision ground, alloy tool steel jaws with center cut blades. Jaws and blades also are heat treated for wear resistance and long cutting life. Tools cut soft, medium or hard materials. Maximum hardness of material is Brinell 455/Rockwell C48. Steel handles with rubber grips. ISO certified.
Product Specifications
Net Weight: 18 lbs.
Size: 11/16" capacity
Length: 42"
|
|
|
Center Cut Bolt Cutters (H.K. Porter) Lot #3 (Sale Order 3 of 1039) General purpose cutters. Maximum hardness of material to be cut is Brinell 300/Rockwell C31.One-piece aluminum alloy handles are precision cast and have rubber grips. ISO certified.
Product Specifications
Net Weight: 4 lbs.
Length: 24"
Capacity: 7/16
|
|
|
Drop Forged Bolt Cutters (WT Import) Lot #4 (Sale Order 4 of 1039) Compound leverage handles are tubular steel with enameling and rubber grips. Alloy steel cutting blades are ground, polished and specially hardened.
Product Specifications
Size: 36" handle; 1/2" capacity
|
|
|
Replacement Bolt Cutter Heads (H.K. Porter) Lot #5 (Sale Order 5 of 1039) For H.K. Porter center bolt cutters. Drop forged, precision ground, alloy tool steel jaws with center cut blades. Cuts soft, medium or hard materials. Maximum hardness of materials to be cut is Brinell 455/Rockwell C48. ISO certified.
Product Specifications
Size: 42"
|
|
|
Skeleton Caulking Gun (Red Devil) Lot #6 (Sale Order 6 of 1039) Features 1/10-gallon capacity and heavy-duty uni-rail construction, with a hex piston rod and quick-release lever. Fits all standard cartridges. Use for light to medium applications.
|
|
|
12-Oz. Stubby Magnetic Hammer Lot #7 (Sale Order 7 of 1039) Stubby size makes this hammer ideal for work in tight places. Full-size, round-face hammer head is drop forged, heat treated and fully polished steel. The head also has a magnet that will hold the nail in place. The handle is made of high impact fiberglass and has a cushioned rubber grip.
|
|
|
16 oz. Carpenter's Hammer (WT Import) Lot #8 (Sale Order 8 of 1039) Cushioned rubber grip, fiberglass handle. Drop forged, polished head.
Product Specifications
Size: 16 oz
|
|
|
16 oz. Claw Hammer (WT Import) Lot #9 (Sale Order 9 of 1039) Hickory handle. Drop forged steel with fully ground and polished head.
Product Specifications
Size: 16 oz.
|
|
|
16 oz. Rocket Hammer Lot #10 (Sale Order 10 of 1039) Rocket Hammers feature a head forged of high carbon steel with a heat treated steel handle for strength and balance. Each hammer comes with a cushioned rubber grip for greater shock absorption and reduction in fatigue.
Product Specifications
OAL: 13"
Head Weight: 16 oz.
|
|
|
16-Ounce Wood Handle Hammer Lot #11 (Sale Order 11 of 1039)
Polished head and hickory handle. Curved claw and round bell.
Product Specifications
Type: Curved claw, round bell.
OAL: 13"
Size: 16 oz.
|
|
|
16-Oz. Composite Hammer with Holder Lot #12 (Sale Order 12 of 1039) This hammer has a full-size claw hammer head and composite handle with soft rubber grip. A handy tool holder is included.
|
|
|
20 oz. A-20R Straight Claw Hammer Lot #13 (Sale Order 13 of 1039) Rocket hammers feature a head forged of high carbon steel with a heat treated steel handle for strength and balance. Each hammer comes with a cushioned rubber grip for greater shock absorption and reduction in fatigue.
Product Specifications
OAL: 14-1/4"
Head Weight: 20 oz.
|
|
|
22 oz. A-22RL Straight Claw Hammer Lot #14 (Sale Order 14 of 1039) Rocket hammers feature a head forged of high carbon steel with a heat treated steel handle for strength and balance. Each hammer comes with a cushioned rubber grip for greater shock absorption and reduction in fatigue.
Product Specifications
OAL: 16"
Head Weight: 22 oz.
|
|
|
24 oz. Ripping or Framing Hammer (WT Import) Lot #15 (Sale Order 15 of 1039) Serrated face, fully ground and polished head. Hickory handle.
Product Specifications
Size: 24 oz.
|
|
|
Fiberglass Handle Hammers Lot #16 (Sale Order 16 of 1039) Black head and polished face and bevel.
Product Specifications
OAL: 13"
Size: 20 oz.
Type: Straight claw; rubber or vinyl grip
|
|
|
Insulated Slotted & Phillips Screwdriver Sets (Wiha) Lot #17 (Sale Order 17 of 1039) Ergonomically molded sanoprene insulated cushioned grips
1,000-volt protection certified and tested
Meets ASTM F-1505, IEC 900, VDE 0680, EN ISO 9001 quality
Each tool individually tested for insulation integrity
Handle and blade insulation is molded on for maximum durability
Wiha special CRM-72 chrome molybdenum tool steel blades are super hardened and tempered for long life performance
Guaranteed quality from Germany
Product Specifications
Type: 6-piece set
Size: Slotted, 9/64" x 4", 3/16" x 5", 1/4" x 6"; Phillips, #1 x 3", #2 x 4", #3 x 6"
|
|
|
Safety Wire Twisting Pliers (WT Import) Lot #18 (Sale Order 18 of 1039) This tool is designed to effectively prevent nuts and bolts from becoming unfastened. Wire locks into the jaw of the pliers, and with a pull, the pliers will automatically twist the wire.
Product Specifications
Length: 7"
|
|
|
10 Pc. Power Hex Driver Bit Set & 1/4" Hex Shank Magnetic Bi Lot #19 (Sale Order 19 of 1039) 10 pc. Power Hex driver bit set: 1/4 hex drive, drop forged chrome vanadium steel. Includes hex sizes (2 each): 3/32, 1/8, 5/32, 3/16 and 7/32". Fits socket head cap screw sizes: #4, #5, #10 and 1/4", flat head screw sizes: #8, #10, 1/4, 5/16 and 3/8", shoulder screw sizes: #10, 1/4, 5/16, and 3/8, how heads and socket set screw sizes: #10, 1/4, 5/16, 3/8 and 7/16. Also accommodates pressure plug sizes 1/16 and 1/8. Also includes 3" magnetic bit holder with stainless steel body.
|
|
|
10-Piece Power Hex Driver Set (Disston) Lot #20 (Sale Order 20 of 1039) Drop forged chrome vanadium steel
Product Specifications
Fits: Socket head cap screws #4, #5, #10, 1/4"; flat head, #8, #10, 1/4, 5/16", 3/8"; shoulder screws, #10, 1/4", 5/16", 3/8"; low heads and socket screws, #10, 1/4", 5/16", 3/8", 7/16"; pressure plugs, 1/16", 1/8"
Drive: 1/4" hex
Size: Two each 3/32", 1/8", 5/32", 3/16", 7/32"
|
|
|
10-Piece T-Handle Hex Key Set (WT Import) Lot #21 (Sale Order 21 of 1039) Chrome vanadium steel blades with molded plastic handles. Includes metal stand.
Product Specifications
Size: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"
|
|
|
11-Piece Expert2 TORX Screwdriver Set (SK) Lot #22 (Sale Order 22 of 1039) The SK Hand Tool Expert2 line features bi-material handles and vapor blasted tips. Handles provide improved comfort and non-slip performance, maximum power in all turning modes and handy hanging holes for storage. Vapor blasted tips provide better contact in screw head recess. Packaged in a pouch.
Product Specifications
Pieces: 11
Size: T6, T7, T8 x 2"; T9, T10, T15 x 3"; T20, T25, T27 x 4"; T30, T40 x 5"
|
|
|
12-Piece Internal TORX Socket Set (Blackhawk) Lot #23 (Sale Order 23 of 1039) Set is made of high quality alloy steel. ISO certified Includes plastic holder.
Product Specifications
Size: 1/4" drive, T10, T15, T20, T25, T30; 3/8" drive, T40, T45, T50, T55; 1/2" drive, T60
|
|
|
15-Piece 1/4" & 3/8" Drive Impact TORX Bit Set (WT Import) Lot #24 (Sale Order 24 of 1039) Chrome vanadium steel. Bits for 1/4- and 3/8-inch drives, along with 3/8-inch female by 1/4-inch male socket adapter and clip rails.
Product Specifications
Size: 1/4" drive, T10, T15, T20, T25, T27, T30; 3/8" drive, T40, T45, T47, T50, T55, T60
|
|
|
15-Piece 1/4" & 3/8" Impact Tamper Proof Star Bit Set Lot #25 (Sale Order 25 of 1039) Drop forged and heat treated. Chrome vanadium steel and black oxide finish. For tamper-proof star fasteners in vehicles, appliances, etc. Set contains bits for 1/4- and 3/8-inch drives, one 3/8-inch female by 1/4-inch male adapter and two cllip-on storage rails.
Product Specifications
Size: 1/4" drive, SD10, 15, 20, 25, 27 and 30; 3/8" drive, SD40, 45, 47, 50, 55 and 60
|
|
|
22-Piece Ballpoint L-Wrench Double Pack (Bondhus) Lot #26 (Sale Order 26 of 1039) Faster in/out using the ball end
Can be rotated up to 25 degrees in all directions
Protanium high torque steel is up to 20 percent stronger than competitor tools
ProGuard dry surface finish is the best rust and corrosion protection available
Bondhex cases included, color coded red for metric and yellow for inch sizes
Cases lock keys into place with a twist and sort and prevent loose or lost wrenches
Product Specifications
Size: Metric, 9 wrenches (1.5-10 mm); inch, 13 wrenches (.050"-3/8")
|
|
|
22-Piece Prohold Tip Ballpoint L-Wrench Double Pack Lot #27 (Sale Order 27 of 1039) These wrenches hold screws the first time … every time. The non-magnetic ProHold® tip on these L-wrenches holds screws snugly on the tool and does not interfere with tool rotation. Tools made of Bondhus' proprietary Protanium® steel and are up to 20 percent stronger than competitors.
The ProGuard™ finish is five times more effective than the next leading brand in preventing rust and protecting your investment over time.
Other features:
Angle entry up to 25 degrees
Stripping does not occur when pressure is applied to the non-magnetic ProHold™ tip
Save time using the ballpoint on the long arm to reach remote and blind locations
Short arm allows for high torque and features a precision tip that permits unobstructed screw entry every time.
Product Specifications
Pieces: 22
Warranty: Lifetime
Size: .050"-3/8"; 1.5-10 mm
|
|
|
22-Piece Short Arm L-Wrench Double Pack (Bondhus) Lot #28 (Sale Order 28 of 1039) This "stubby" wrench goes where standard L-wrenches won't fit. It eliminates the need to cut off the short arm and has a smaller inside radius for tight spaces. Precision cut tip for full engagement and Balldriver tip on long arm for angle entry and fast screw removal.
Bondhus Protanium high torque steel is up to 20 percent stronger than competitor tools. The ProGuard dry surface finish is the best rust and corrosion protection available.
The Bondhex case is included. It locks keys into place with a twist as well as sorts and prevents loose or lost wrenches. Sizes are printed on case to find tools at a glance. The case may be used to increase leverage. Color coded yellow for inches.
Product Specifications
Type: Inch & metric
Pieces: 22
Size: .050"-3/8", 1.5-10 mm
|
|
|
3/8" Hex Socket (USA) Lot #29 (Sale Order 29 of 1039) From Indestro. Spring loaded ball retainer.
Product Specifications
Drive: 1/2" square
|
|
|
30-Piece Tamper-Resistant Star L-Wrench Set (Bondhus) Lot #30 (Sale Order 30 of 1039) Triple pack consists of a nine-piece ball-end metric L-wrench set; 13-piece ball end inch L-wrench set; and eight-piece star GorillaGrip fold-up set.
Tools are made of Bondhus' proprietary Protanium steel and are up to 20 percent stronger than competitor tools
ProGuard finish is five times more effective than the next leading brand in preventing rust, protecting your investment over time
Sets fit easily into pockets or toolboxes.
Perfect where a variety of tool sizes are required The L-wrench sets are packaged in Bondhex tool cases, color coded red for metric and yellow for inches
GorillaGrip handle on fold-up allows easy selection of one tool at a time
Product Specifications
Size: L-wrench, .050"-3/8", 1.5-10 mm; fold-up, T9-T40
Warranty: Lifetime
|
|
|
4-Piece Precision TORX Screwdriver Set (General) Lot #31 (Sale Order 31 of 1039) Driver tip size is shown on cap
Rotating cap -- facets fit palm; recess fits fingertip
Color-coded rings identify type of tip
Body sized to prevent excessive torque to fastener
Eight-sided non-slip cushion grip
Plated nickel-chrome-moly or black oxide nickel-chrome-moly blades
ISO certified
Product Specifications
Pieces: 4
Size: T6 x 1-1/2"; T10, T15, T20 x 2-1/2"
|
|
|
6-Piece TORX Screwdriver Set (WT Import) Lot #32 (Sale Order 32 of 1039) Contains the six most popular TORX sizes.
Product Specifications
Size: T-10, T-15, T-20, T-25, T-27, T-30
|
|
|
7-Piece External TORX Socket Set Lot #33 (Sale Order 33 of 1039) Set made of high quality alloy steel and is ISO certified. Includes plastic holder.
Product Specifications
Size: 1/4" inch drive, E6, E7, E8; 1/2" drive, E10, E12, E14, E16
|
|
|
7-Piece Wing Style TORX Wrench Set (Wiha) Lot #34 (Sale Order 34 of 1039) Blades of Wiha CRM-72 tool steel with precision machined exact fit tips
Molded-on handle and top spinner knob
Through hardened durability and industrial black oxide finish
No over tightening damage
Guaranteed quality from Germany
Stand included
Product Specifications
Pieces: 7
Size: 6, T7, T8, T9, T10, T15, T20
Warranty: Lifetime
|
|
|
9 pc. L-Style Torx Wrench Set Lot #35 (Sale Order 35 of 1039) Contains one of each: T6, T7, T8, T9, T10, T15,& T20 with stand.
|
|
|
9-Piece Allen Key Style TORX Set (WT Import) Lot #36 (Sale Order 36 of 1039) Drop forged, rustproof black finish. TORX heads on both ends. Packaged in plastic pouch.
Product Specifications
Size: T9, T10, T15, T20, T25, T27, T30, T40, T45
OAL: 2-1/4"- 4-3/4"
|
|
|
8-Piece Tamper Resistant Star L-Wrench Sets (Bondhus) Lot #37 (Sale Order 37 of 1039) For tamper resistant star recessed screws
Precision machined ends provide full engagement
Tools are made of Bondhus' proprietary Protanium steel and are up to 20 percent stronger than competitors
ProGuard finish is five times more effective than the next leading brand in preventing rust, protecting your investment over time
Packaged in Bondhus' patented "Bondhex" case, wrenches slip in and out easily and lock in place with a slight twist
Product Specifications
Size: 8 wrenches (T9-T40)
Warranty: Lifetime
|
|
|
Ball Point Wrench Set (WT Import) Lot #38 (Sale Order 38 of 1039) These ball point wrenches are plastic handle style. Eight-piece set.
Product Specifications
Size: 7/64", 1/8", 9/64", 3/16", 7/32", 1/4", 5/16", 3/8"
|
|
|
Ball Hex & Standard Hex Key Sets (Eklind) Lot #39 (Sale Order 39 of 1039) Produced from 8650 chrome nickel alloy steel and finished to resist rust. Maximum reach and torque Sets include color coded, compact, molded plastic holders.
Product Specifications
Type: Standard hex short
Color: Red case (inch); blue case (metric)
Size: 22 keys (.50" to 3/8"; 1.5-10 mm)
|
|
|
Ball Point Wrenches (WT Import) Lot #40 (Sale Order 40 of 1039) Plastic handle style.
Product Specifications
Size: 3/8"
|
|
|
Ball-Hex-Driver Screwdriver Sets (Eklind) Lot #41 (Sale Order 41 of 1039) Eklind Ball-Hex-Drivers™ provide 360 degrees of rotation at up to a 35-degree angle. Large diameter tools have bigger handles for better grip and superior torque. Small diameter tools feature a precision style handle with a finger rest at the top. Handles and vinyl set pouches are color coded -- red for inch sizes and blue for metric (inch set shown).
Product Specifications
Type: Metric
Size: 7 drivers (1.3-5 mm)
Length: 4"-6" blade
Color: Blue handles & pouch
|
|
|
Balldriver Hex Screwdriver Sets (Bondhus) Lot #42 (Sale Order 42 of 1039) The Balldriver® tool is perhaps the greatest time and labor saving invention ever introduced to the hex tool market. The speed and ease with which it can accomplish insertion and extraction of screws is unmatched by any other method.
Handle core is molded from durable plastic and designed to last a lifetime;
Ergonomic design and slightly cushioned feel help prevent fatigue and improve grip
Handle and blade torque matched to prevent breaking the tip
Blades of Protanium steel, exclusive to Bondhus and the hardest, most ductile and longest wearing steel that exists in the hex tool industry
Product Specifications
Size: 6 drivers (1.5-5 mm)
Type: Metric
|
|
|
Balldriver L-Wrench Sets (Bondhus) Lot #43 (Sale Order 43 of 1039) The Balldriver® tool is perhaps the greatest time and labor saving invention ever introduced to the hex tool market. The speed and ease with which it can accomplish insertion and extraction of screws is unmatched by any other method. Balldrivers feature an ergonomic design; angle entry to 25 degrees; and industrial quality hardened blades of Protanium steel.
Product Specifications
Size: 6 keys (1.5-5 mm)
Type: Metric
|
|
|
Balldriver T-Handle Hex Tool Sets (Bondhus) Lot #44 (Sale Order 44 of 1039) The T-handle is the best selection for applications where maximum torque is needed for insertion or extraction of screws. Compared to a screwdriver handle, less effort is needed to generate comparable torque.
The T-handle is capable of producing a flywheel affect for "spinning" fasteners in or out of low friction materials. A common misconception is that a shorter blade can generate more torque than a longer one. In reality, blade length has no effect on torque.
Features:
Ballpoint tip for angle entry into hard to reach fasteners up to 25 degrees
Extra long blades for added reach
Welded steel handle for maximum strength and torque.
Cushioned grip for user comfort
Product Specifications
Warranty: Lifetime
Type: Metric
Size: 7 tools (2.5-10 mm)
|
|
|
Classic Fold-Up Hex Key Sets (Eklind) Lot #45 (Sale Order 45 of 1039) This versatile line of tools is available in inch, metric and TORX. Each set of keys is housed in a one-piece comfort grip handle that is designed to operate smoothly and hold the keys firmly in any desired work position. Keys crafted from 8650 chrome nickel alloy steel; are treated for superior strength; and finished to resist rust. Maximum torque and wear resistance.
Product Specifications
Type: TORX
Size: 7 keys (T10-T40)
|
|
|
Hawg Buddy 7-in-1 Fold-Up Blade Set Lot #46 (Sale Order 46 of 1039) From Bondhus, another versatile Gorilla Grip® fold-up multi-blade set. The Hawg Buddy is all the tool you'll ever need to keep your Harley-Davidson motorcycle tight. Seven blades -- 5/32-, 3/16-, 1/4- and 5/16-inch hex; T27 and T40 star; and Phillips #2.
The GorillaGrip fold-up handle on the Hawg Buddy is 40 percent stronger than steel and will not rust or corrode. It's also comfortable to hold and does not conduct heat or cold. The patented Bondhus design allows selection of one blade at a time, without the need for annoying mechanisms to release a blade.
|
|
|
Combo Ball End L-Wrench & Fold-Up Sets (Bondhus) Lot #47 (Sale Order 47 of 1039) Bondhus' proprietary Protanium steel is up to 20 percent stronger than competitor tools
ProGuard finish is five times more effective than the next leading brand in preventing rust, protecting your investment over time
Sets fit easily into pockets or toolboxes
L-wrench set is packaged in Bondhus' patented Bondhex tool case
GorillaGrip handle flutes allow easy selection of one tool at a time
Product Specifications
Size: Hex keys: .050", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"; Fold-up: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
Type: SAE
Warranty: Lifetime
|
|
|
Ergo-Fold Hex Key Sets (Eklind) Lot #48 (Sale Order 48 of 1039) Ergo-Fold key sets feature a composite grip handle shaped for superior ergonomics. A soft cushion-grip insert offers comfort and slip resistance, while a hard shell provides maximum strength. Eklind keys provide extra reach for safer clearance from your work.
The key sets can be used at a right angle to generate maximum torque. They also can be used as a screwdriver when fully extended to a firm stop. As with all other Eklind hex key products, the highest quality 8650 chrome nickel alloy hex steel is used. It is heat treated for superior strength and finished to resist rust.
Product Specifications
Size: 8 keys (T8, T10-T40)
Type: TORX
|
|
|
Fold-Up Hex Key Sets (Bondhus) Lot #49 (Sale Order 49 of 1039) GorillaGrip fold-up handle is 40 percent stronger than steel; will not rust or corrode; comfortable in the hand; and does not conduct heat or cold
Patented Bondhus design allows selection of one blade at a
Blades have a positive stop at 270 degrees open
Convenient flip and turn feature permits screw insertion or removal when working near an obstruction, without the need to continually remove and reinsert the tool into the screw head.
Blades accessible from both sides for single blade selection without the "unstacking" of blades associated with metal fold-ups
Blades made of Bondhus' exclusive Protanium steel formula; it is harder, more ductile, has greater torque capacity and is more uniform than other steels
ProGuard dry finish prevents corrosion and boosts tool durability and life
Cases are color coded yellow for inch, red for metric and green for star (TORX)
Product Specifications
Size: 8 keys (T9-T40)
Warranty: Lifetime
Type: Star
|
|
|
Fold-Up Hex Key Sets (WT Import) Lot #50 (Sale Order 50 of 1039) Separate heat-treated hex keys fold into one handy unit. Fits most Allen-type screws. Finished in black oxide with chrome-plated steel case.
Product Specifications
Size: 3/16"-3/8"
Handle Length: 5-1/4"
|
|
|
Goldguard 14K Gold Plated Ballpoint L-Wrench Sets Lot #51 (Sale Order 51 of 1039) 14-karat gold plated for corrosion resistance and identification
Precision milled Ballpoint® tip
Protanium high torque steel for 20 percent more torque, tighter screws, longer wear and sharper corners for extra grab
Lifetime warranty from Bondhus
Hex keys allow insertion and removal by spinning the blade between the fingers
Ball-end hex keys are far more efficient than a straight hex blade, since they allow quick insertion from a range of angles
Even when working in wide open spaces, a ball-end is a real timesaver
Easily carried in a pocket
Allows working in tight to reach areas
Hex keys require an extension handle to reach the full torque capacity of the long arm of the blade
Product Specifications
Type: Inch & metric combo
Size: 22 wrenches (1.5-10 mm; .050"-3/8")
Warranty: Lifetime
|
|
|
Inch Hex Key Sets (Eklind) Lot #52 (Sale Order 52 of 1039) Produced from 8650 chrome nickel alloy steel
Ball-hex L keys provide 360 degrees of rotation at up to a 35-degree angle
Maximum reach and maximum torque
Finished to resist rust
Molded plastic, color coded, compact holders
Product Specifications
Size: 11 keys (050"-1/4")
Type: Standard hex short
Color: Red case
|
|
|
Individual Ball-Hex-Driver Screwdrivers (Eklind) Lot #53 (Sale Order 53 of 1039) Eklind Ball-Hex-Drivers™ provide 360 degrees of rotation at up to a 35-degree angle. Large diameter tools have bigger handles for better grip and superior torque. Small diameter tools feature a precision style handle with a finger rest at the top. Handles are color coded -- red for inch and blue for metric sizes.
Product Specifications
Size: 7/32"
Blade Length: 5.6"
|
|
|
Individual Loop Style Hex T-Keys -- Inch (Eklind) Lot #54 (Sale Order 54 of 1039) Eklind hex T-keys feature one-piece loop handle construction for extra strength. Choose from 9-inch cushion grip for extra comfort or 6-inch standard grip for a more economical option.
Keys are made from 8650 chrome nickel alloy steel, hardened, tempered and finished to resist rust. Cushion grip tool handles are color coded red for inch sizes.
Product Specifications
Size: 3/8"
Length: 9"
Type: Hex cushion grip
|
|
|
Individual Loop Style Hex T-Keys -- Metric (Eklind) Lot #55 (Sale Order 55 of 1039) Eklind hex T-keys feature one-piece loop handle construction for extra strength. Choose from 9-inch cushion grip for extra comfort or 6-inch standard grip for a more economical option.
Keys are made from 8650 chrome nickel alloy steel, hardened, tempered and finished to resist rust. Cushion grip tool handles are color coded blue for metric sizes.
Product Specifications
Size: 4 mm
Type: Hex standard grip
Length: 6"
|
|
|
Individual Power-T Hex Keys -- Inch (Eklind) Lot #56 (Sale Order 56 of 1039) Cushion grip handles on Eklind Power-T keys are ergonomic, with a textured, slip-resistant grip for extra torque and safety, as well as reduced hand fatigue. Produced from 8650 chrome nickel alloy steel, hardened and tempered. Finished to resist rust.
Product Specifications
Type: Ball hex
Size: 5/16"
Length: 9"
|
|
|
Individual Power-T Hex Keys -- Metric (Eklind) Lot #57 (Sale Order 57 of 1039) Cushion grip handles on Eklind Power-T keys are ergonomic, with a textured, slip-resistant grip for extra torque and safety, as well as reduced hand fatigue. Produced from 8650 chrome nickel alloy steel, hardened and tempered. Finished to resist rust.
Product Specifications
Type: Hex
Length: 9"
Size: 2.5 mm
|
|
|
Metric Fold-Up Hex Key Set (WT Import) Lot #58 (Sale Order 58 of 1039) Separate heat-treated hex keys fold into one handy unit. Fits most Allen-type screws. Finished in black oxide with chrome-plated steel case.
Product Specifications
Handle Length: 3-5/8" (92 mm)
Size: 1.5, 2, 2.5, 3, 4, 5, 6 mm
|
|
|
Individual T-Handle Hex Keys (WT Import) Lot #59 (Sale Order 59 of 1039) Keys in popular fractional sizes. Molded plastic handles with steel blades. Length is 6 inches.
Product Specifications
Size: 5/32"
|
|
|
L-Style TORX Wrench Sets (Wiha) Lot #60 (Sale Order 60 of 1039) Precision machined tips for exact fit and longest tool life
High performance tool steel
Black finish and through hardened for extreme durability
100 percent improvement in drive performance over other systems
Virtually eliminates screw head cam-out
Holder is included
Guaranteed quality from Germany
Product Specifications
Size: 7 keys (T6, T7, T8, T9, T10, T15, T20)
|
|
|
Loop Style Hex T-Key Sets (Eklind) Lot #61 (Sale Order 61 of 1039) Eklind hex T-keys feature one-piece loop handle construction for extra strength. Popular inch and metric sets are available in both 6- and 9-inch lengths. Choose from cushion grip for extra comfort or standard grip for a more economical option.
Keys are made from 8650 chrome nickel alloy steel, hardened, tempered and finished to resist rust. Sets in vinyl pouches fit compactly into a toolbox or hang in the workshop. Cushion grip tool handles and pouches are color coded -- red for inch and blue for metric.
Product Specifications
Type: Hex metric, cushion grip
Size: 8 keys (2-10 mm)
Length: 9" shaft
|
|
|
MagicRing Hex Key Sets (Wiha) Lot #62 (Sale Order 62 of 1039) Don't drop that screw! Use the most productive innovation for hex tools in 30 years -- Wiha's MagicRing system. MagicRing is like having three tools in one -- a standard hex tool, ball end for 25-degree angle entry and screw holding convenience. MagicRing saves time, improves productivity and makes jobs easy.
Uses a hardened spring steel compression ring
Securely grips inner head of screw
Allows free hand for work positioning
Hardened tool steel, precision machined
Hard chromed corrosion resistant finish
Guaranteed quality from Germany
Includes tip-out key holder
Product Specifications
Size: 9 keys (1.5-10 mm)
Type: Metric
|
|
|
Metric Hex Key Sets (Eklind) Lot #63 (Sale Order 63 of 1039) Produced from 8650 chrome nickel alloy steel
Ball-hex L keys provide 360 degrees of rotation at up to a 35-degree angle
Maximum reach and maximum torque
Finished to resist rust
Molded plastic, color coded, compact holders
Product Specifications
Size: 7 keys (1.5-6 mm)
Type: Standard hex short
Color: Blue case
|
|
|
Power-T Handle Hex Key Sets (Eklind) Lot #64 (Sale Order 64 of 1039) Cushion grip handles on Eklind Power-T keys are ergonomic, with a textured, slip-resistant grip for extra torque and safety, as well as reduced hand fatigue. Produced from 8650 chrome nickel alloy steel, hardened and tempered. Finished to resist rust. Includes vinyl pouch.
Product Specifications
Length: 6"
Type: Hex metric
Size: 8 keys (2-10 mm)
|
|
|
Individual Wing Style TORX Wrenches (Wiha) Lot #65 (Sale Order 65 of 1039) Especially for use with indexable carbide tooling and for working in confined spaces
Blades of Wiha CRM-72 tool steel with precision machined exact fit tips
Molded-on handle and top spinner knob
Through hardened durability and industrial black oxide finish
No over tightening damage
Guaranteed quality from Germany
Product Specifications
Size: T20
|
|
|
9" Welding Clamp (WT Import) Lot #66 (Sale Order 66 of 1039) Drop forged and chrome plated. Double jaw for holding two plates and adjustable knurl.
Product Specifications
Jaw Thickness: 1-5/8"
OAL: 9"
Jaw Capacity: 2-3/4"
|
|
|
Locking Wrenches (IRWIN) Lot #67 (Sale Order 67 of 1039) Heavy-duty jaws lock on to three sides of a hex fastener and will not slip or mar
Designed to replace up to 16 wrench sizes
Includes built-in wire cutter
Turn screw to adjust pressure and to fit work
Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Jaw Capacity: 1-1/8"
Size: 10"
|
|
|
Long Nose Metal Ratchet Clamp Pack Lot #68 (Sale Order 68 of 1039) 2-1/2" jaw capacity
Removable soft rubber pads
Large, wide jaws
Notched clamping stages for sensitive clamping and tightening
Quick release mechanism
Swivel jaw ends
Bonus -- free long nose locking pliers
|
|
|
Metal Ratchet Clamp Pack Lot #69 (Sale Order 69 of 1039) 1-3/4" jaw capacity
Removable soft rubber pads
Large, wide jaws
Notched clamping stages for sensitive clamping and tightening
Quick release mechanism
Swivel jaw ends
Bonus -- includes free curved jaw locking pliers
|
|
|
Original Locking C-Clamp Tools (IRWIN) Lot #70 (Sale Order 70 of 1039) Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Throat Depth: 16 in.
Throat: 4-3/4 in.
OAL: 24 in.
Jaw Adj: 10 in.
|
|
|
Original Locking C-Clamps with Swivel Pads (IRWIN) Lot #71 (Sale Order 71 of 1039) Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface
Turn screw to adjust pressure and fit work; stays adjusted for repetitive use
Constructed of high grade heat treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
OAL: 24-1/2"
Jaw Adj: 10"
|
|
|
Sheet Metal Pliers (WT Import) Lot #72 (Sale Order 72 of 1039) Use to bend, form, crimp or straighten. Drop forged and chrome plated. Powerful non-slip grip. Deep throat reach.
Product Specifications
Opening: 4"
Size: 10"
|
|
|
Sheet Metal Tool (IRWIN) Lot #73 (Sale Order 73 of 1039) Makes bending, forming, and crimping jobs easier
Turn screw to adjust pressure and fit work
Stays adjusted for repetitive use
Constructed of high grade, heat treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Jaw Capacity: 1/2"
Jaw Adj: 3-1/8"
Size: 8"
Throat Depth: 1-3/4"
|
|
|
The Original Locking C-Clamp -- 18DR (IRWIN) Lot #74 (Sale Order 74 of 1039) Wide opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work
Stays adjusted for repetitive use
Constructed of high grade heat treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Jaw Capacity: 7-1/2"
Size: 18"
|
|
|
Vise-Grip Locking Chain Clamp (IRWIN) Lot #75 (Sale Order 75 of 1039) Chain is 18 inches long and holds and locks around any shape or size
Ideal for awkward shaped pieces
Turn screw to adjust pressure and fit work; stays adjusted for repetitive use
Constructed of high grade heat treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Size: 9"
Chain Size: 18"
Style: Complete tool
|
|
|
Vise-Grip Locking Panel Clamp (IRWIN) Lot #76 (Sale Order 76 of 1039) Provides quick clamping and alignment of auto body panels; bottom jaw slides in a straight-line motion
Turn screw to adjust pressure and fit work; stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Jaw Capacity: 3/8"
Jaw Depth: 3-1/8"
Size: 8"
Throat Depth: 1-3/4"
|
|
|
Vise-Grip Welding Clamp (IRWIN) Lot #77 (Sale Order 77 of 1039) U-shaped jaws provide enhanced visibility and more working space
Holds work in proper alignment
For use in welding applications or for holding awkward shapes in place
Turn screw to adjust pressure and fit work; stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Product Specifications
Jaw Width: 1-3/4"
Size: 8"
Jaw Capacity: 1-3/4"
Throat Depth: 1-5/8"
|
|
|
12-in-1 Multi-Tool "Pocket Tool Chest" (WT Import) Lot #78 (Sale Order 78 of 1039) Compact; folds in half
Durable all metal construction
Features 1/4-inch slotted and #1 Phillips screwdrivers, knife, can opener, file, ruler, awl, fish scraper and wire cutter
Leather pouch and belt loop
|
|
|
600 Series Needle Nose Multi-Plier Multi-Tools (Gerber) Lot #79 (Sale Order 79 of 1039) These versatile Multi-Plier® tools feature all of the following functions: wire cutter, crimper, standard/metric scale, lanyard ring, cross-head screwdriver, bottle and can opener, serrated sheeps foot blade, large, medium and small flathead screwdrivers, file, drop point blade and needle nose pliers. Sheaths included.
Product Specifications
Length: 6-5/8" open; 5-1/8" closed
Weight (oz.): 8
Type: Black oxide
|
|
|
Blunt Nose Multi-Lock Tools (Gerber) Lot #80 (Sale Order 80 of 1039) The Gerber Multi-Lock is like having 15 tools in one. Finesse is combined with a rugged toughness for daily use. Useful for construction, travel, car, home, all-purpose kit and camping or other outdoor recreational activities.
Tools include needle nose pliers, wire cutter, crimper, standard/metric scale, lanyard tab, Phillips screwdriver, bottle/can opener, serrated sheeps foot blade, large, medium and small flathead screwdrivers, file, and drop point blade. With Gerber's Safe-T-Plus system, all tools lock firmly and safely into place. Stainless steel or black oxide styles. Includes ballistic cloth sheath.
Product Specifications
Warranty: Limited lifetime
Type: Black oxide
|
|
|
Multi-Tool 2012 (WT Import) Lot #81 (Sale Order 81 of 1039) All metal construction. Folds down for convenient storage. Comes with nylon sheath with belt loop. Consists of pliers, wire cutter, 2-1/4 inch knife, carton cutter, slotted and Phillips screwdrivers, awl, bottle and can opener, 2-inch wood saw and 2-inch scale.
|
|
|
Multi-Tool 2018 (WT Import) Lot #82 (Sale Order 82 of 1039) All metal construction. Folds down for convenient storage. Comes with nylon sheath with belt loop. Tool features the following: pliers, wire cutter, pipe clamp, 2-1/2 inch knife, slotted and Phillips screwdrivers, bottle and can opener, rope tool, 5-inch/13-millimeter scale, scissors, file and wood saw.
|
|
|
Multi-Tool 2024 with Hex Drive & Bits (WT Import) Lot #83 (Sale Order 83 of 1039) All metal construction. Includes nylon sheath and belt loop. This tool features a 1/4-inch hex drive with 11 bits (Phillips #1, #2, #3; slotted, 1/8", 3/16", 1/4"; hex, .05, 3/32, 1/8, 3/16, 7/32 inch). Also includes pliers, wire cutter, pipe clamp, wood saw, leather punch, bottle and can opener, 5-inch/13-millimeter scale and file.
|
|
|
Multi-Tool 9824 with Hex Drive & Bits (WT Import) Lot #84 (Sale Order 84 of 1039) Locking device holds each tool securely in place. All metal construction. Includes nylon sheath with belt loop. This tool features a 1/4-inch hex drive with 11 bits (Phillips #1, #2, #3; slotted, 1/8, 3/16, 1/4 inch; hex, .05, 3/32, 1/8, 3/16, 7/32 inch). Also included are pliers, wire cutter, pipe clamp, 2-1/2 inch knife blade, file, bottle and can opener, lather punch and needle and 8-3/4 inch/22-millimeter scale.
|
|
|
Pruning Shears (WT Import) Lot #85 (Sale Order 85 of 1039) All steel safety lock. Attachments are 2-1/2 inch knife blade, coarse and fine saws, and grafting tool. Includes nylon sheath with belt loop.
|
|
|
11" Quick Adjust Pipe Wrench (IRWIN) Lot #86 (Sale Order 86 of 1039) The quick adjusting pipe wrench is built with convenience and durability in mind.
One-handed operation enhances user's speed and convenience
Ratchets quickly to work surface
Smooth release upon job completion
Broached teeth ideal for most surfaces, including black, galvanized, PVC and copper pipe as well as nuts, bolts and couplings
43 percent less weight than standard 14-inch cast iron pipe wrenches
Ergonomic handle ideal for heavy torque and maximum comfort
Riveted to heat treated steel body
Product Specifications
Jaw Capacity: 2-1/4"
Length: 11"
|
|
|
9" Auto Wrench (WT Import) Lot #87 (Sale Order 87 of 1039) General purpose adjustable wrench, drop forged.
Product Specifications
Opening: 2-5/8" max.
|
|
|
Aluminum Handle Offset Pipe Wrenches (RIDGID) Lot #88 (Sale Order 88 of 1039) Nearly 50 percent lighter than comparable cast iron models of the same size. Features a jaw opening parallel to the handle and a narrower hook jaw head, which provides easy entry into tight spots.
Product Specifications
Pipe Capacity: 3"
Size: 24"
|
|
|
Aluminum Handle Straight Pipe Wrenches (RIDGID) Lot #89 (Sale Order 89 of 1039) Aluminum handles make these heavy-duty pipe wrenches approximately 40 percent lighter than similar ones with malleable iron handles. Parts are identical to those of RIDGID straight heavy-duty pipe wrenches. Ideal for overhead work. ISO certified.
Product Specifications
Pipe Capacity: 6"
Net Weight: 18-1/2 lbs.
Size: 48"
|
|
|
Cast Aluminum Pipe Wrenches (IRWIN) Lot #90 (Sale Order 90 of 1039) Heavy-duty cast aluminum housing is 40 percent lighter than cast iron and easier to maneuver
I-beam handle and wide design provide better weight distribution
Drop-forged jaw is heat treated to resist distortion or breakage
Easy spin adjusting nut is heat treated for durability
Hammer head design provides a flat surface for hammering
Lifetime guarantee
Product Specifications
Warranty: Lifetime
Size: 48"
Capacity: 6"
|
|
|
Heavy-Duty Offset Pipe Wrench (RIDGID) Lot #91 (Sale Order 91 of 1039) Features a jaw opening parallel to the handle and a narrower hook jaw head, which provides easy entry into tight spots.
Product Specifications
Size: 24"
Pipe Capacity: 3"
Net Weight: 9.75 lbs.
|
|
|
Heavy-Duty Straight Pipe Wrenches (Ridgid) Lot #92 (Sale Order 92 of 1039) Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws. Wrenches comply with federal specifications GGG-N65IE, Type ll, Class A. ISO certified.
Product Specifications
Net Weight: 51.25 lbs.
Pipe Capacity: 8"
Size: 60"
|
|
|
Lightweight Aluminum Pipe Wrenches (WT Import) Lot #93 (Sale Order 93 of 1039) Drop forged jaws.
Product Specifications
Size: Set; 14", 18", 24"
|
|
|
RapidGrip Wrench (RIDGID) Lot #94 (Sale Order 94 of 1039) One-handed adjustment and rapid ratcheting action. Aggressive tooth design for secure grip. Thumb trigger for easy application and removal.
Product Specifications
Capacity: 2" pipe (50 mm)
Size: 14" (300 mm)
|
|
|
10" Adjustable Locking Wrench (WT Import) Lot #95 (Sale Order 95 of 1039) Fingertip release opens wrench instantly. Complete with side cutter. Can be used as a quick-clamp pipe wrench, toggle press or hand vise. Jaws adjust to hold hundreds of sizes and shapes.
Product Specifications
Net Weight: 2 lbs.
|
|
|
2-Piece Mini Locking Pliers Set (WT Import) Lot #96 (Sale Order 96 of 1039) Long jaw pliers of drop forged, heat treated steel.
Product Specifications
Size: 4", 5"
|
|
|
3-Piece Long Nose Locking Pliers Set (WT Import) Lot #97 (Sale Order 97 of 1039) Drop forged jaws, hardened and tempered. Milled teeth. Wire cutter. Includes vinyl pouch.
Product Specifications
Size: 5", 7", 10"
|
|
|
3-Piece Vise-Grip Locking Pliers Set (IRWIN) Lot #98 (Sale Order 98 of 1039) Set contains two locking pliers with wire cutters and one 6-inch long nose
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work
Pliers stay adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth designed to grip from any angle
Product Specifications
Jaw Thickness: 1/4", 3/8", 1-3/4"
OAL: 5", 6" 10"
Jaw Adj: 1-1/4", 1-7/8", 2-1/4"
Includes: 10WR, 6LN, 5WR
Pieces: 3
|
|
|
5-Piece Vise-Grip Locking Pliers Set (IRWIN) Lot #99 (Sale Order 99 of 1039) Set contains 6-inch long nose; 10-inch curved jaw; 10-inch straight jaw; and 5- and 7-inch locking with wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work
Pliers stay adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth designed to grip from any angle
Product Specifications
Pieces: 5
OAL: 5", 6", 7", two 10"
Jaw Adj: 1-1/4" - 2-1/4"
Jaw Thickness: 1/4" - 1-3/4"
Includes: 6LN, 10CR, 10R, 7WR, 5WR
|
|
|
Curved Jaw Locking Pliers (IRWIN) Lot #100 (Sale Order 100 of 1039) Curved jaw puts tremendous pressure on four points of any style nut or bolt head
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work
Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth are designed to grip from any angle
Product Specifications
Thickness: 3/8"
Jaw Capacity: 1-7/8"
OAL: 10"
|
|
|
Large Jaw Locking Pliers (IRWIN) Lot #101 (Sale Order 101 of 1039) Heavy-duty jaw grips around work of all shapes; ideal for plumbers, mechanics, welders and others working with large objects
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work; stays adjusted for repetitive use
High-grade heat treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth designed to grip from any angle
Product Specifications
Jaw Capacity: 3-1/8
Size: 12"
|
|
|
Long Nose Locking Pliers (IRWIN) Lot #102 (Sale Order 102 of 1039) Long, straight nose provides easy access in narrow, hard to reach places
Ideal for precision work and hobbies
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work
Stays adjusted for repetitive use
Constructed of high grade, heat treated, alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth are designed to grip from any angle
Product Specifications
Size: 4"/100 mm
Jaw Capacity: 1/5"/38 mm
|
|
|
Straight Jaw Locking Pliers Lot #103 (Sale Order 103 of 1039) Straight jaws provide maximum contact on flat, square, or hex work. Ideal for tightening, clamping, twisting and turning. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Hardened teeth are designed to grip from any angle.
Product Specifications
Size: 10"
Jaw Capacity: 1-3/4"
|
|
|
10" Code Blue Tongue & Groove Pliers (Channellock) Lot #104 (Sale Order 104 of 1039) Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures, no slip jaw action
Patented reinforcing edge minimizes stress breakage
PermaLock fastener eliminates nut and bolt failures
Laser-hardened teeth provide longer life
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Jaw Adj: 7
Length: 10"
Capacity: 2"
Net Weight: 13.33 oz.
Thickness: 3/8"
Jaw Lgth: 1-3/8"
|
|
|
2-Piece Tongue & Groove GripLock Pliers Set GLS1 Lot #105 (Sale Order 105 of 1039) Ergonomically designed offset head for greater leverage
Special jaw design accommodates many shapes
Patented PermaLock® fastener eliminates nut and bolt failure
Distinctive Channellock Blue comfort grips
Product Specifications
Jaw Capacity: 1-3/4", 2-1/4"
Size: 9-1/2", 12"
|
|
|
2-Piece Tongue & Groove Griplock Pliers Set GLS2 Lot #106 (Sale Order 106 of 1039) Ergonomically designed offset head for greater leverage
Special jaw design accommodates many shapes
Patented PermaLock® fastener eliminates nut and bolt failure
Distinctive Channellock Blue comfort grips
Product Specifications
Jaw Capacity: 1-1/4", 1-3/4"
Size: 6-1/2", 9-1/2"
|
|
|
2-Piece Tongue & Groove Pliers Set (Channellock TG1) Lot #107 (Sale Order 107 of 1039) Set of Model 420, 9.5 inches, and Model 440, 12 inches. Pliers feature:
Channellock's patented undercut tongue-and-groove design that assures strongest no slip jaw action
Patented PermaLock fastener to eliminates nut and bolt failures
Channellock Blue comfort grips
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented reinforcing edge minimizes stress breakage
Electronic coating to prevent rusting.
Product Specifications
Size: 9-1/2", 12-1/2"
Net Weight: 2 lbs.
Jaw Capacity: 1-1/2" (5 adjustments); 2-1/4" (7 adjustments)
|
|
|
2-Piece Tongue & Groove Pliers Set GS-1 (Channellock) Lot #108 (Sale Order 108 of 1039) One of Channellock's most popular models
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures a no slip jaw action
Patented reinforcing edge minimizes stress breakage
Patented PermaLock® fastener eliminates nut and bolt failures
Distinctive Channellock Blue comfort grips (only for hand comfort and improved appearance; not recommended or warranted for dielectric properties
Product Specifications
Pieces: 2 pcs.
Size: 6.5" and 9.5"
Net Weight: 2 lbs.
|
|
|
3-Piece Tongue & Groove Griplock Pliers Set GLS3 Lot #109 (Sale Order 109 of 1039) Ergonomically designed offset head for greater leverage
Special jaw design accommodates many shapes
Patented PermaLock® fastener eliminates nut and bolt failure
Distinctive Channellock Blue comfort grips
ISO certified
Product Specifications
Size: 6", 9-1/2", 12"
Jaw Capacity: 1-1/4", 1-3/4", 2-1/4"
|
|
|
3-Piece Tongue & Groove Pliers Set (Channellock GS-3) Lot #110 (Sale Order 110 of 1039) Set contains Models 440 (12-inch), 420 (9.5-inch) and 426 (6.5-inch) tongue and groove pliers
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures a no slip jaw action
Patented reinforcing edge minimizes stress breakage.
Patented PermaLock® fastener eliminates nut and bolt failures.
Distinctive Channellock Blue comfort grips (only for hand comfort and improved appearance; not recommended or warranted for dielectric properties)
ISO certified
Product Specifications
Size: 6-1/2", 9-1/2", 12"
|
|
|
3-Piece Tongue & Groove Pliers Set (Crescent R200) Lot #111 (Sale Order 111 of 1039) More positions for more flexibility and grip comfort
Patented angled tooth pattern for better grip
Extra wide, straight, jaw openings
Unique alloy steel and induction hardening maximizes durability
Precision machining provides smooth, positive joint action with no slip
ISO certified
Product Specifications
Size: 7", 10", 12"
Opening: 1-5/16", 1-13/16", 3"
|
|
|
8" Code Blue Long Nose Pliers with Cutter (Channellock) Lot #112 (Sale Order 112 of 1039) Heavy-duty design
Cross-hatching on jaws grabs work tightly
Useful crushing area
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Jaw Lgth: 2-19/64"
Width: 1" joint, 5/32" tip
Length: 8-1/2"
Net Weight: 8.36 oz.
Thickness: 1/2" joint
|
|
|
Pit Crew's Choice Tongue & Groove Pliers Set Lot #113 (Sale Order 113 of 1039) Channellock's Pit Crew's Choice set contains the following tongue and groove pliers -- Model 424, 4.5 inches; Model 426, 6.5 inches; Model 440, 12 inches; and Model 460, 16 inches.
Features:
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures no-slip jaw action
Patented reinforcing edge minimizes stress breakage
Patented PermaLock® fastener eliminates nut and bolt failures
Distinctive Channellock Blue® comfort grips only for hand comfort and improved appearance; not recommended or warranted for dielectric properties.
Product Specifications
Size: 4-1/2", 6-1/2", 12", 16"
|
|
|
9-1/2" Code Blue Tongue & Groove Pliers (Channellock) Lot #114 (Sale Order 114 of 1039) Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures, no slip jaw action
Patented reinforcing edge minimizes stress breakage
PermaLock fastener eliminates nut and bolt failures
Laser-hardened teeth provide longer life
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Jaw Adj: 5
Jaw Lgth: 1-1/8"
Includes: Safety stop
Capacity: 1-1/2"
Net Weight: 12.33 oz.
Thickness: 1/4"
Length: 9"
|
|
|
Drop Forged Groove Joint Pliers (WT Import) Lot #115 (Sale Order 115 of 1039) Fully polished alloy steel. Plastic coated handle.
Product Specifications
Size: 16"
|
|
|
GripLock Utility Tongue & Groove Pliers Lot #116 (Sale Order 116 of 1039) Ergonomically designed offset head for greater leverage
Special jaw design accommodates many shapes
Patented PermaLock® fastener eliminates nut and bolt failure
Distinctive Channellock Blue comfort grips
Product Specifications
Size: 12"
|
|
|
GrooveLock Pliers (IRWIN) Lot #117 (Sale Order 117 of 1039) Press and slide button quickly adjusts lower jaw
All purpose jaw grips on round, flat, square and hex shapes
More groove positions provide the optimum hand location for a better grip on the workpiece
ProTouch grips provide extra comfort and reduce hand fatigue
Ratcheting action allows pliers to be adjusted from the open position up to the workpiece by pushing the handle up; need to press the button
Design prevents handles from pinching
Product Specifications
Size: 20", 25 grooves
Opening: 135 mm (5-1/4") nut size across flats
Jaw Capacity: 6"
Pipe Size: 4.5"
|
|
|
Nut Buster Pliers (Channellock) Lot #118 (Sale Order 118 of 1039) Don't use a pipe wrench when you can just use the Channelock "Nut Buster." Easier to adjust and has right angle teeth that will grip in all directions. With Channellock Blue comfort grips.
Product Specifications
Size: 14"
|
|
|
Tongue & Groove Pliers (Channellock) Lot #119 (Sale Order 119 of 1039) Straight jaw. With Channellock Blue comfort grips. Right angle teeth grip in all directions. Under cut tongue and groove won't slip.
Product Specifications
Jaw Capacity: 5-1/2"
Size: 20-1/2"
|
|
|
Tongue & Groove Pliers (Crescent) Lot #120 (Sale Order 120 of 1039) Made from the finest quality tool steel
Designed to grip all shapes, such as rods, pipes and cable connections
Precision milled ribs for smooth, positive interlock between two halves
No chance of halves separating or jumping out of grooves
Straight jaws and self-locking jaw adjustment
Forged, hardened and tempered
Red non-slip cushion handle grips
Eight jaw positions
Product Specifications
Length: 12"
Jaw Capacity: 2-1/2"
|
|
|
V-Jaw Tongue & Groove Pliers (Channellock) Lot #121 (Sale Order 121 of 1039) The V-jaw gives you more points of contact on objects. The specially designed hardened right angle teeth provide maximum gripping power in either direction and reduce slippage.
Product Specifications
Size: 20-1/4"
Jaw Capacity: 5-1/2"
|
|
|
3-Piece Cat Bar Set (WT Import) Lot #122 (Sale Order 122 of 1039) Each made of high quality forged steel, with taper pin and offset head. Sizes are as follows:
1/2-inch hex bar, 3/4-inch blade, 14 inches OAL
5/8-inch hex bar, 1-inch blade, 18 inches OAL
3/4-inch hex bar, 1-1/4 inch blade, 24 inches OAL
|
|
|
3-Piece Dominator Curved Pry Bar Set (Mayhew) Lot #123 (Sale Order 123 of 1039) Patented capped-end handle allows the user to strike bar without damaging handle
Two-composite handle designed for user comfort and reduced hand fatigue
Hardened and tempered the entire length
Fully warranted
Product Specifications
Pieces: 3
Length: 12", 17", 25"
|
|
|
4-Piece Bent Tip Pry Bar Set (SK) Lot #124 (Sale Order 124 of 1039) Set features SK's patented SureGrip square handle that provides gripping strength, even if your hands are greasy. Each bar is is hardened and tempered for maximum durability. Bent tip design for extra leverage.
Product Specifications
Size: 12", 17", 25", 31"
|
|
|
4-Piece Rolling Head Pry Bar & Drift Set (WT Import) Lot #125 (Sale Order 125 of 1039) Heat treated, drop forged steel. Bars have maximum leverage; use long tapered body for lining up drift.
Product Specifications
Size: 6", 12", 16", 20"
|
|
|
4-Piece Screwdriver Style Pry Bar Set (WT Import) Lot #126 (Sale Order 126 of 1039) Heat treated, chrome vanadium blades. Handles are PVC screwdriver style. Tools are resistant to moisture.
Product Specifications
Size: 7/16" W blade x 8" OAL; 5/8" W blade x 12" OAL; 13/16" W x 18" OAL; 1-3/16" W blade x 24" OAL
|
|
|
5-Piece Jumbo Pry Bar Set (WT Import) Lot #127 (Sale Order 127 of 1039) Drop forged, heat-treated and rust-resistant. High-visibility handles.
Product Specifications
Size: Pry bars, 1/4" x 4", 3/8" x 7", 7/16" x 12", 1/2" x 18"; Rolling head prybar, 16"
|
|
|
5-Piece Pry Bar & Wrecking Set Lot #128 (Sale Order 128 of 1039) Tools made of alloy steel with square shanks and polished tips. Set contains the following:
18-inch dual head pry bar
12-inch nail puller
15-inch flat pry bar
10-inch pry bar and nail puller
16-inch heavy-duty pry bar
|
|
|
Die Bars (USA) Lot #129 (Sale Order 129 of 1039) A practical shop tool for quick separation of punch and die holders.
Product Specifications
Length: 30"
Size: 5/8" hex
|
|
|
Gooseneck Wrecking Bars (WT Import) Lot #130 (Sale Order 130 of 1039) Drop forged of the finest quality steel. Various lengths available.
Product Specifications
Size: 48"
|
|
|
Pinch Point Crowbars (WT Import) Lot #131 (Sale Order 131 of 1039) Drop forged. A must for any machine shop or heavy equipment plant.
Product Specifications
Size: 1-1/4" square dim.
Length: 60"
Weight (oz.): 18 lbs.
|
|
|
Pry or Jimmy Bars (WT Import) Lot #132 (Sale Order 132 of 1039) Spring steel or drop forged versions.
Product Specifications
OAL: 13" L x 7/8" W x 1/8" thick
Type: Drop forged
|
|
|
Rolling Head Pry Bars & Drifts (WT Import) Lot #133 (Sale Order 133 of 1039) Heat treated, drop forged steel. Bars provide maximum leverage; long tapered body may be used for lining up drift.
Product Specifications
Size: 20"
|
|
|
Utility Bars (WT Import) Lot #134 (Sale Order 134 of 1039) Drop forged, tapered body. With 90-degree angle for leverage.
Product Specifications
Size: 12"
|
|
|
Wrecking Bars (WT Import) Lot #135 (Sale Order 135 of 1039) With double end nail puller and 90-degree neck.
Product Specifications
Size: 24"
|
|
|
10-Piece Hollow Punch Set (WT Import) Lot #136 (Sale Order 136 of 1039) Punches can be used on rubber, leather, copper and soft brass, as well as other soft materials. Includes holder.
Product Specifications
Size: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4"
|
|
|
12-Piece Hollow Punch Set (WT Import) Lot #137 (Sale Order 137 of 1039) Punches cut clean holes in any soft material. Hardened with knurled grip for easy handling and long life.
Product Specifications
Size: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"
|
|
|
12-Piece Industrial Punch & Chisel Sets (WT Import) Lot #138 (Sale Order 138 of 1039) Chrome alloy steel tools, in handy vinyl roll-up pouch. Set consists of two pin and four drift punches; and one cape, one diamond point and four cold chisels.
Product Specifications
Type: 6"-12" L set
|
|
|
12-Piece Pilot Punch Set (Mayhew) Lot #139 (Sale Order 139 of 1039) For removal of hollow pins. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Size: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2"
|
|
|
13-Piece Gunsmith Punch Set (WT Import) Lot #140 (Sale Order 140 of 1039) Set packaged in blow molded case and consists of:
Eight brass punches, sizes 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32 and 5/16 inch
Two steel pin punches, sizes 1/16 and 3/32 inch
Two hard plastic punches, sizes 15/64 and 3/8 inch
One brass head hammer
|
|
|
14-Piece Combination Punch Set (WT Import) Lot #141 (Sale Order 141 of 1039) Combo has two full sets -- five 8-inch pin punches with black knurled bodies and hardened and ground pins, and eight 3-1/2 inch solid brass pin punches.
A 5-inch automatic center punch rounds out the package. It can be operated with one hand and is adjustable for light to heavy markings. Point is hardened alloy steel. Entire kit comes in roll-up pouch for easy storage.
Product Specifications
Length: Steel punches, 8"; brass punches, 3-1/2"; center punch, 5"
Size: Steel pin punches, 1/8", 3/16", 1/4", 5/16", 3/8"; brass pin punches, 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 3/8"
|
|
|
14-Piece Punch & Chisel Set (Blackhawk) Lot #142 (Sale Order 142 of 1039) Chisels and punches will have many uses in light industrial and automotive. Set consists of five cold chisels and five pin punches. Also one each flat cape and diamond point chisels, and center and prick punches. Vinyl pouch included. ISO certified.
Product Specifications
Size: Cold chisels, 3/8", 1/2", 5/8", 3/4", 1"; pin punches, 1/8", 5/32", 3/16", 1/4", 3/8"
|
|
|
16-Piece Hollow Punch Tool Kit (Mayhew) Lot #143 (Sale Order 143 of 1039) The only dual cutting heads on the market. Unique locking system enables easy changing of heads. Interchangeable heads allow precise cuts from 1/8 to 1-3/16 inches. Fifteen punches with polypropylene molded case, which is resistant to shock and chemicals.
Product Specifications
Size: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1-1/16", 1-1/8", 1-3/16"
|
|
|
17-Piece Gun Care Set (Grace) Lot #144 (Sale Order 144 of 1039) The complete GCT-17 hand-picked set contains the Grace USA Gun Care screwdriver set. This eight-piece set was in your grandfather's gun repair box. Hand assembled and custom hollow ground to fit scope, plug, guard, floor plate, sight and many other gun screw types as well.
The square-shanked blades are hardened and tempered to RC 52-56 and guaranteed not to twist or chip. The handles are turned from quality Maine hardwood and protected with a smooth finish. Guaranteed to last for years, Grace will replace screwdrivers from this set that have not met your total satisfaction.
The kit also has the Grace USA Gun Care brass punch set. An absolute must when working in a no mar, no spark situation. This fine set consists of eight brass punches, sizes 1/16 to 5/16 inch. Each punch is machined from quality 5/16-inch solid brass hex stock and beautifully polished. The Gun Care brass 8-ounce hammer is made specifically for the gun trade. Its solid brass head is machine turned from quality 360 brass and hand polished. The properly seasoned hickory handle is then driven into the finished brass head and securely brass pinned.
All components are housed in an attractive compact zipper case that securely holds and protects the tools. This custom designed 12-by-9-by-1-1/2-inch case is made from durable soft Nukaf.
Grace Gun Care products are made with precision, designed specifically for gun enthusiasts who care about keeping their firearms in prime condition.
|
|
|
18 Series Automatic Center Punches (Starrett) Lot #145 (Sale Order 145 of 1039) These punches and nail sets are universally used, but most often by machinists and carpenters. They are well-proportioned for ease of use. The specially selected tool steel is hardened and tempered to the proper hardness. All of them feature nicely knurled finger grips for ease of handling.
A special tempering process makes the head less likely to fracture from a hard, off-center blow. Rugged automatic punches have all-steel handles and parts. These punches have a mechanism that automatically strikes a blow when downward pressure is applied. No hammer is required, making one hand always free to steady the work.
The adjustable knurled cap regulates the blow's force. Should a heavy mark be required, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward. Spring tension regulates the blow and is constant, so marks made by the point are uniform in depth and size for each setting.
The point can be easily removed for regrinding and/or replacement. All sizes are identical in style, differing only in the striking power. ISO certified.
Product Specifications
OAL: 5-1/4"
Size: 11/16"
|
|
|
3-Piece Punch Set (WT Import) Lot #146 (Sale Order 146 of 1039) Black nitrate finish. Hardened chrome alloy steel with knurled body. Center, prick and pin punches in pouch.
Product Specifications
OAL: 4" 4 4"
|
|
|
3/8" Prick Punch (Mayhew) Lot #147 (Sale Order 147 of 1039) Scribe lines into metal before cutting or riveting. Punch is made of high grade tool steel for superior tensile strength, toughness and long life. The shanks is fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
OAL: 5"
Size: 3/8" body dia.
|
|
|
4-Piece Brass Punch Kit (Mayhew) Lot #148 (Sale Order 148 of 1039) Two pin and one each solid and drift punches, with knurled handles. Packed in vinyl pouch.
Product Specifications
Size: Drift punch, 3/8"; pin, 1/4", 3/8"; solid, 3/8"
|
|
|
4-Piece Line-Up Punch Set (Mayhew) Lot #149 (Sale Order 149 of 1039) For aligning and sizing holes. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Size: 1/8", 5/32", 3/16", 1/4"
|
|
|
4-Piece Taper Punch Long Set (WT Import) Lot #150 (Sale Order 150 of 1039) Hardened chrome alloy steel with black nitrate finish and knurled body. Ground taper.
Product Specifications
Size: 5/16", 3/8", 5/8", 11/16"
OAL: 7", 9", 10", 12"
|
|
|
5" Automatic Center Punch (WT Import) Lot #151 (Sale Order 151 of 1039) Entirely automatic single hand operation. Adjustable from very light to extra heavy markings. Used for marking, punching, staking, riveting, etc. Replacement points and moving parts are made of hardened alloy steel.
|
|
|
5-Piece Center Punch Set (WT Import) Lot #152 (Sale Order 152 of 1039) Hardened chrome alloy steel with black nitrate finish and knurled body. Includes fitted pouch.
Product Specifications
OAL: 3-3/4"
Size: 1/16", 5/64", 9/64", 5/32"
|
|
|
5-Piece Cold Chisel Set (Blackhawk) Lot #153 (Sale Order 153 of 1039) Cold chisels are good for general purpose scraping, cutting and removal. Vinyl pouch also included. ISO certified.
Product Specifications
Size: 3/8", 1/2", 5/8", 3/4", 1"
|
|
|
248 Series Drive Pin Punches (Starrett) Lot #154 (Sale Order 154 of 1039) Punches have knurled grips and are well proportioned, hardened and properly tempered. They are designed to withstand hard use and provide a most satisfactory punch for machine shop and motor service work. Adjust the punch to follow long cotter pins and the like into holes without hindrance. Punch diameters are slightly under the sizes listed. ISO certified.
Product Specifications
OAL: 8"
Size: (Set) 1/8", 3/16", 1/4", 5/16", 3/8" dia.
Body Dia: 7/16"-9/16"
|
|
|
264 Series Center Punches (Starrett) Lot #155 (Sale Order 155 of 1039) Square knurled grip will not roll when laid down. Made of tool steel, hardened and tempered. A special tempering process prevents the head from fracturing. Tips are accurately centered and ground at the proper angle for maximum service. ISO certified.
Product Specifications
OAL: 2-7/8" - 5"
Size: 1/16"-1/4" point dia.
Thickness: 1/4"-27/64"
Type: 7-piece set w/plastic case
|
|
|
5-Piece Extra Long Drive Pin Punch Set (General) Lot #156 (Sale Order 156 of 1039) Machinists use General's center punches for marking work in layout and drilling operations. These tools are constructed of hardened and ground alloy tool steel for maximum strength and durability. Conforms to government specifications GGG-P-831E. long. Knurled body. For use on work not accessible with shorter punches.
Product Specifications
Length: 4-1/2" body; 3-1/2" drive pin
Size: A-E
Pieces: 5
|
|
|
5-Piece Extra Long Pin Punch Set (WT Import) Lot #157 (Sale Order 157 of 1039) Black nitrate finish, chrome alloy steel. Hardened and knurled bodies; hardened and ground pins. Includes fitted pouch.
Product Specifications
OAL: 3-1/2"
Diameter: 1/8", 3/16", 1/4", 5/16", 3/8"
|
|
|
5-Piece Nail Punch Set (WT Import) Lot #158 (Sale Order 158 of 1039) Black nitrate finish, hardened chrome alloy steel. Knurled body. Includes pouch.
Product Specifications
Size: 1/16", 3/32", 1/8", 5/32", 3/16"
OAL: 4"
|
|
|
5-Piece Pin Punch Set (Blackhawk) Lot #159 (Sale Order 159 of 1039) In vinyl pouch.
Product Specifications
Size: 1/8", 5/32", 3/16", 1/4", 5/16"
|
|
|
5-Piece Solid Punch Set (Mayhew) Lot #160 (Sale Order 160 of 1039) Set includes vinyl pouch. Punches made of high grade tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Size: Starter punch, 3/16"; pin punches, 1/8", 5/32", 3/16", 1/4"
|
|
|
6-Piece Brass Pin Punch Set (WT Import) Lot #161 (Sale Order 161 of 1039) Designed to prevent damage to objects being struck.
Product Specifications
Size: Pin punches, 3/32" x 4-1/4", 1/8" x 4-3/4"; 5/32" x 5", 3/16" x 5-1/4", 1/4" x 5-3/4"; center punch, 3/16" x 6"
|
|
|
6-Piece Pilot Punch Set (Mayhew) Lot #162 (Sale Order 162 of 1039) Easy removal of spring or roll pins. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming. Includes vinyl pouch.
Product Specifications
Size: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
|
|
|
6-Piece Punch & Chisel Set (Mayhew) Lot #163 (Sale Order 163 of 1039) Punches are made of high grade tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming. All Mayhew chisels are blast finished.
Product Specifications
Size: Cold chisels, 1/2", 5/8"; center punch, 3/8"; pin punches, 3/16", 1/8"; solid punch, 3/16"
|
|
|
6-Piece Punch Set (Mayhew) Lot #164 (Sale Order 164 of 1039) Punches made of high grade tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Size: Center punch, 5/16"; prick, 3/8"; starter, 1/8", 3/16"; pin, 3/16", 1/4"
|
|
|
565 Series Drive Pin Punches (Starrett) Lot #165 (Sale Order 165 of 1039) Made from a specially selected tool steel. Well proportioned, hardened, highly polished. Knurled finger grip. Punch size is stamped on the head. ISO certified.
Product Specifications
Size: (8-piece set) 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" dia.
Body Dia: 19/64" - 29/64"
OAL: 4"
|
|
|
7-Piece Arch Punch Set (General) Lot #166 (Sale Order 166 of 1039) Gasket punches, hollow steel punches and arch punches are all used for punching holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. For punching holes in leather, rubber, gasket material and soft metals. Inside taper for clearance. Heat treated Sheffield forged steel. Set comes in plastic roll.
Product Specifications
Size: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"
Pieces: 7
|
|
|
7-Piece Arch Punch Set (WT Import) Lot #167 (Sale Order 167 of 1039) For punching holes in soft materials, such as gaskets, rubber and soft metals. Includes fitted pouch.
Product Specifications
Pieces: 7
Size: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"
|
|
|
8-Piece Drive Pin Punch Set (General) Lot #168 (Sale Order 168 of 1039) Machinists use General's center punches for marking work in layout and drilling operations. These tools are constructed of hardened and ground alloy tool steel for maximum strength and durability. Tool steel punches are uniformly heat treated and centerless ground to withstand the hardest use. Ends are ground square for accurate pin driving. Knurled bodies. Conforms to government specifications GGG-P-831E. Packaged in plastic pouch.
Product Specifications
Size: A - H
Pieces: 8
Length: 4"
|
|
|
8-Piece Pin Punch Set (WT Import) Lot #169 (Sale Order 169 of 1039) Hardened chrome alloy steel. Set includes pouch.
Product Specifications
OAL: 4"
Size: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
|
|
|
9-Piece Pilot Punch Set (Mayhew) Lot #170 (Sale Order 170 of 1039) Easy removal of spring or roll pins. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming. Includes vinyl pouch.
Product Specifications
Size: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
|
|
|
All Steel Automatic Center Punch (General) Lot #171 (Sale Order 171 of 1039) General's automatic center punch is a precise means of punching center holes for drilling in layout work. A single-handed operation with stored energy design eliminates the need for striking the punch with a hammer.
Spring tension cap can be adjusted for light to heavy strokes
Punch depth can be set for repetitive work
Replaceable points, shafts and moving parts are hardened alloy steel
Black oxide finish inhibits rust
Product Specifications
Body Dia: 1/2"
Length: 5"
|
|
|
Ball Bearing Automatic Center Punch (General) Lot #172 (Sale Order 172 of 1039) General's automatic center punches are a precise means of punching center holes for drilling in layout work. A single-handed operation with stored energy design eliminates the need for striking the punch with a hammer.
Features:
Spring tension cap can be adjusted for light to heavy strokes
Punch depth can be set for repetitive work
Replacement points, shafts and moving parts are hardened alloy steel
Unique ball bearing action
Lightweight aluminum body with long wearing alloy steel parts
All-steel solid point is replaceable
Product Specifications
OAL: 5"
Diameter: 5/8" body
|
|
|
Center Punch Set (Starrett) Lot #173 (Sale Order 173 of 1039) Center punches are made of tool steel, hardened on both ends. They have round shanks and knurled grips. Starrett's special tempering process prevents the head from fracturing; adds greatly to punch life; and avoids accidents from flying splinters. Tips are accurately center. Includes plastic case. OAL is 3-1/8 inches on small punch and 4 inches on all others. ISO certified.
Product Specifications
Size: 1/16" point, 3/16 body dia.; 5/64" point, 9/32", body dia.; 3/32" point, 5/16" body dia.; 9/64" point, 5/16" body dia.; 5/32" point, 3/8" body dia.
|
|
|
Arch Punches (General) Lot #174 (Sale Order 174 of 1039) Gasket punches, hollow steel punches and arch punches are all used for punching holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. Inside taper for clearance. Heat treated Sheffield forged steel.
Product Specifications
Size: 7/8"
|
|
|
Center Punches (Mayhew) Lot #175 (Sale Order 175 of 1039) Make indentations for starting drills in metal and other materials. Punches made of high grade tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Type: 1/2" cut
Point Size: 5/16" point; 1/2" body
OAL: 6"
|
|
|
Gun Care Brass Punch Set (Grace) Lot #176 (Sale Order 176 of 1039) An absolute must when working in a no mar, no spark situation. This fine set consists of eight brass pin punches sizes 1/16 to 5/16 inch. Each punch is machined from quality 5/16-inch solid brass hex stock and beautifully polished.
Product Specifications
Pieces: 8 pcs.
|
|
|
Knockout Punch Set for Electrical Boxes (WT Import) Lot #177 (Sale Order 177 of 1039) Used specifically to punch out precut holes in electrical boxes. High carbon steel. Set contains four dies, four hole punches and two driving screws. Packaged in a blow molded case.
Product Specifications
Size: Dies, 1/2", 3/4", 1", 1-1/4"; punches, 7/8", 1-3/32", 1-11/32", 1-11/16"
Capacity: 10-gauge mild steel
|
|
|
Magnetic Brad Driver Lot #178 (Sale Order 178 of 1039) Drives finishing nails up to 1-1/4 inches long. Built-in countersink. Just drop brad or nail into barrel, magnet holds it in driving position.
|
|
|
Pocket Automatic Center Punch (General) Lot #179 (Sale Order 179 of 1039) General Tools' largest, most robust center punch is the professional's choice for marking and staking the toughest metals. The one-handed operation makes accurate marks without the need for a hammer and provides accurate center punches to prevent drill bits from traveling.
In addition, the amount of impact force can be adjusted for working with lighter materials. Includes a threaded, replaceable steel point. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. ISO certified.
Product Specifications
Includes: Center punch
|
|
|
Line-Up Punches (Mayhew) Lot #180 (Sale Order 180 of 1039) For aligning and sizing holes. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
OAL: 15"
Size: 1/4" cut
|
|
|
Pilot Punches (Mayhew) Lot #181 (Sale Order 181 of 1039) Easy removal of spring or roll pins. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Size: 3/8"
OAL: 6"
|
|
|
Pin Punches (Mayhew) Lot #182 (Sale Order 182 of 1039) Easy removal of spring or roll pins. Punches made of high grade S2 tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
OAL: 8"
Size: 3/8" cut
|
|
|
Power Hole Hand Punch Kit (WT Import) Lot #183 (Sale Order 183 of 1039) Seven sizes; piercing power up to 14 gauge. Punch accurate precision round holes in steel, aluminum, brass, copper and plastic with one hand. Side gage for depth adjustment.
Product Specifications
Capacity: 14 gauge
Size: 8-3/8" L x 3-7/8" H
Punch Dia: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32"
Throat Depth: 2"
Net Weight: 3-1/2 lbs.
|
|
|
Solid Punches (Mayhew) Lot #184 (Sale Order 184 of 1039) For loosening frozen or tight pins and keys or knocking out rivets. Punches made of high grade tool steel for superior tensile strength, toughness and long life. Shanks are fully heat treated, a two-step process in which the entire length of the tool is hardened and tempered; then the struck end is drawn back. This Mayhew exclusive process assures the struck end will be less susceptible to mushrooming.
Product Specifications
Size: 5/16" cut
OAL: 6"
|
|
|
Transfer Punch Sets (WT Import) Lot #185 (Sale Order 185 of 1039) For toolmakers, machinists and tool cribs. Made of the finest tool steel, heat treated and tempered, with black oxide finish. Set includes indexed stand.
Product Specifications
Size: 3/32"-1/2" x 64ths, plus 17/32"
Pieces: 28
OAL: 4-7/8"
Diameter: .0025"
|
|
|
Big Daddy Hand Riveter (Klik-Fast) Lot #186 (Sale Order 186 of 1039) The Big Daddy is Marson's most powerful hand riveter, taking the hard work out of setting large diameter blind rivets. Its extra-long handles provide excellent leverage and permit working a foot beyond natural reach.
Other features are a patented bearing design, self adjusting two-piece jaws and single unit body construction with a steel insert to provide stronger threads for the nosepieces included. Comes with three nosepieces, which are stored in the body.
Product Specifications
Size: 5/32", 3/16",1/4" nosepieces
|
|
|
Hand Riveter (Klik-Fast) Lot #187 (Sale Order 187 of 1039) The HP-2 is the largest selling hand riveting tool in the industry. Known and trusted for durability, quality and performance, the HP-2 is often copied but never equaled.
Its square shoulder fulcrum pin of cold-formed heat treated steel prevents pin rotation that can elongate engaging holes and cause premature tool failure in imitation tools.
Other quality features include precision die-case, high-strength aluminum alloy body; drop forged carbon steel upper handle; and thick cushion molded vinyl grips for comfort. The HP-2 comes with four mounted nosepieces and service wrench.
Product Specifications
Capacity: 3/16" rivets max.
Net Weight: 1 lb., 3 oz.
Size: 3/32", 1/8", 5/32", 3/16" nosepieces
|
|
|
Hand Riveter (WT Import) Lot #188 (Sale Order 188 of 1039) Heavy-duty. Includes three nosepieces.
Product Specifications
Size: 1/8", 5/32", 3/16" nosepieces
OAL: 18"
|
|
|
Hand Riveter Kit (Klik-Fast) Lot #189 (Sale Order 189 of 1039) The deluxe hand riveter kit includes the HP-2 and 200 assorted Klik-Fast rivets in popular sizes. The molded plastic case houses and protects the tool, rivets and optional countersink double ended drill bit.
|
|
|
Heavy Duty Hand Riveter Lot #190 (Sale Order 190 of 1039) 4) Interchangeable nozzle bushings: 3/32, 1/8, 5/32 and 3/16. Fits right on the gun. Long nose gets into hard-to-reach places. Spring loaded handle for automatic ejection of mandrel. Contour grip handle with vinyl cover for added comfort.
|
|
|
Klik-Turn Riveter Lot #191 (Sale Order 191 of 1039) The SP-1swivel head hand-held rivet tool features a patented positive ratchet locking feature, which allows the swivel head section to turn 360 degrees and hold any of the 40-plus positions.
The high strength steel body and cast aluminum head complement the riveter's design. The SP-1 also includes built-in threaded nosepiece storage holes and a service wrench.
Product Specifications
Net Weight: 1.2 lbs.
Capacity: 3/16" rivets max.
|
|
|
Nibbler Tool (Klein) Lot #192 (Sale Order 192 of 1039) Cuts soft sheet metal, plastic, soft copper and aluminum, and tubing. Ideal for air conditioning and heating installation, automobile work, model making and sheet metal construction.
Product Specifications
Capacity: 18-gauge sheet metal; 1/16" plastic, copper, aluminum; 1" ID tubing
|
|
|
Thread-Setter Kit (Klik-Fast) Lot #193 (Sale Order 193 of 1039) Kit contains the following:
Marson Klik-Fast 39200 Thread-Setter tool in a molded plastic case
Mandrels and nosepieces for 6-32, 8-32 and 10-24 sizes; mandrel for 1/4-20
103 assorted Klik Rivet-Nuts and Poly-Nuts
Instructions
Wench
Plastic compartmentalized carrying case
|
|
|
Thread-Setter Tool (Klik-Fast 34504) Lot #194 (Sale Order 194 of 1039) Choose the 34604 for installing larger sized threaded inserts. It is a heavy-duty tool that will install 10-24 to 3/8-16 and 5- to 10-millimeter Rivet-Nuts and thread inserts in aluminum or steel. Quick-change mandrels and easy adjustable stroke. Includes 1/4-20 mandrel.
|
|
|
Thread-Setter Tool (Klik-Fast 39200) Lot #195 (Sale Order 195 of 1039) This quality threaded insert installation tool features patented bearing design, comfortable hand grips and a locking chain. The 39200 installs all sizes of Klik Poly-Nuts and Rivet-Nuts up to 1/4 inch and 6-millimeter steel.
This tool is rugged and durable, all due to its many features --forged, heat treated steel upper handle; high strength precision die-cast aluminum alloy body; patented fulcrum pin design; and comfortable hand grips.
The Thread-Setter is packaged in a reusable, heavy-duty vinyl pouch. Also includes mandrels and nosepiece to set 8-32, 10-24 and 10-32 inserts.
|
|
|
1-1/2" Putty Knives (Red Devil) Lot #196 (Sale Order 196 of 1039) High-carbon steel blade is rust resistant. Blade extends through the sturdy solvent-resistant handle, which increases tool life and strength while spreading or scraping.
Product Specifications
Type: Flexible
|
|
|
1-1/2" Chisel Scraper (WT Import) Lot #197 (Sale Order 197 of 1039) Stiff blade with ground mirror finish. Metal handle.
|
|
|
3" Wall Scrapers (Red Devil) Lot #198 (Sale Order 198 of 1039) High carbon steel blade is rust resistant. It extends through the sturdy solvent-resistant handle, which increases tool life and provides greater force for spreading or scraping.
Product Specifications
Type: Flexible
|
|
|
5-Piece Gasket Remover Set (WT Import) Lot #199 (Sale Order 199 of 1039) With high impact plastic handles.
|
|
|
Classic Wood Scrapers (Red Devil) Lot #200 (Sale Order 200 of 1039) These scrapers feature a hardwood handle and will not crack under pressure. The double edge scrapers have a flip-over feature.
Product Specifications
Size: 2-1/2" edges
Type: Double edge
Length: 9-1/4"
|
|
|
ERGO EZ GRIP 1-1/2" Flexible Putty Knife (Red Devil) Lot #201 (Sale Order 201 of 1039) ERGO EZ GRIP flexible blade putty knife is specially designed with an ergonomically engineered handle to decrease hand fatigue. Extra sturdy, high carbon steel blade resists rust and extends through handles for maximum strength and durability.
Product Specifications
Blade: 1-1/2" flexible
|
|
|
ERGO EZ GRIP 7-In-1 Painter's Tool (Red Devil) Lot #202 (Sale Order 202 of 1039) Scraper, spreader, gouger, putty remover, paint roller cleaner, nail setter and nail puller. ERGO EZ GRIP 7-in-1 tool is specially designed with ergonomically engineered handle to decrease hand fatigue. Extra sturdy, high carbon steel blade resists rust and extends through handle for maximum strength and durability.
Product Specifications
Blade: 2-1/2" stiff
|
|
|
ERGO EZ GRIP Spackling Knife (Red Devil) Lot #203 (Sale Order 203 of 1039) ERGO EZ GRIP spackling knife is specially designed with an ergonomically engineered handle to decrease hand fatigue. Extra sturdy, high carbon steel blade resists rust and extends through handles for maximum strength and durability.
Product Specifications
Blade: 3" flexible
|
|
|
ERGO EZ GRIP Wall Scrapers (Red Devil) Lot #204 (Sale Order 204 of 1039) ERGO EZ GRIP wall scrapers are specially designed with ergonomically engineered handle to decrease hand fatigue. Extra sturdy, high carbon steel blades resist rust and extend through handles for maximum strength and durability. Stiff blade style.
Product Specifications
Type: 4" blade
|
|
|
Flexible Taping Knives (Red Devil) Lot #205 (Sale Order 205 of 1039) High-carbon steel blade is rust resistant. Blade extends through the sturdy plastic solvent-resistant handle, which increases long life and the strength you need for spreading or scraping.
Product Specifications
Size: 6" width
|
|
|
Triangular Scraper (WT Import) Lot #206 (Sale Order 206 of 1039) Hollow ground, hardened to Rockwell C91-93 and polished. Lacquered hardwood handle.
Product Specifications
Blade Length: 8"
OAL: 12"
|
|
|
Zip-A-Way Painter's 6-in-1 Tool (Red Devil) Lot #207 (Sale Order 207 of 1039) Gouger, scraper, putty remover, spreader, roller cleaner and nail setting head. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs.
|
|
|
10-Piece 3/8" Drive Crowfoot Wrench Set (WT Import) Lot #208 (Sale Order 208 of 1039) Made of drop forged, hardened, tempered and triple chrome plated steel. Square drive.
Product Specifications
Drive: 3/8" square
Size: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1"
|
|
|
10-Piece Universal Adapter Set (SK) Lot #209 (Sale Order 209 of 1039) Set features high polish SuperKrome® finish, which provides for long life and maximum corrosion resistance. Ball detent securely holds sockets on coupler, to prevent slippage. The exclusive SureGrip rail holds sockets tightly with a spring-loaded steel ball similar to a ratchet drive square. Sockets can be removed quickly and easily from the rail.
Set in molded plastic storage case and contains the following:
1/4- and 3/8-inch drive universal chrome
1/4-, 3/8- and 1/2-inch drive universal impacts
Chrome adapters: 1/4-inch female to 3/8-inch male; 3/8-inch female to 1/4-inch male; 3/8-inch female to 1/2-inch male; 1/2-inch female to 3/8-inch male; 1/2-inch female to 3/4-inch male
|
|
|
11-Piece Spline Bit Set (WT Import) Lot #210 (Sale Order 210 of 1039) Drop forged, chrome vanadium steel. Set consists of bits, 1/2-inch by 3/8-inch female adapter, and blow molded plastic case.
Product Specifications
Size: 30 mm long bits, M5, M6, M8, M10, M12; 75 mm bits, M5, M6, M8, M10, M12
Pieces: 11
Shank Size: 3/8"
|
|
|
3-Piece Power Drill Set (WT Import) Lot #211 (Sale Order 211 of 1039) Turn any drill motor or electric screwdriver into a power ratchet. Converts 1/4-inch hex drive to 1/4-, 3/8- and 1/2-inch square. Chrome vanadium steel.
Product Specifications
Drive: 1/4", 3/8", 1/2" square
|
|
|
5-Piece 1/2" Drive Torque Extension Bar Set (Genius) Lot #212 (Sale Order 212 of 1039) These torque extension bars are for use with 1/2-inch drive impact wrenches rated 380 to 420 foot-pounds of torque. Various torque limits allow use of any impact socket with a torque extension to match the different lug nut sizes found on vehicles.
The extension bars help prevent over-torquing of wheel nuts and minimize wheel distortion. The unique design allows the torque shaft length and diameter to flex with each impact wrench blow, once the specified torque is reached. Accurate to within 4 percent. Extensions are made of chrome vanadium steel and have color coded plastic sleeves. Includes plastic storage case.
Product Specifications
Drive: 1/2"
Size: 65, 80, 100, 120, 140 ft.-lbs.
OAL: 7"
|
|
|
8-Piece 3/8" Drive Fractional Hex Bit Set (Blackhawk) Lot #213 (Sale Order 213 of 1039) Packaged on clip rail.
Product Specifications
Size: 1/8", 9/64", 5/53", 3/16", 7/32", 1/4", 5/16", 3/8"
|
|
|
8-Piece Metric/SAE COLOR MATCH Car Wheel Socket Set Lot #214 (Sale Order 214 of 1039) For use with 1/2-inch drive impact wrenches rated 380 to 420 foot-pounds of torque; allows use of any impact socket with a torque extension to match the different lug nut sizes found on vehicles.
Extensions help prevent over-torquing of wheel nuts and minimize wheel distortion. The unique design allows the torque shaft length and diameter to flex with each impact wrench blow, once the specified torque is reached. Accurate to within 4 percent. Components are made of chrome vanadium steel and have color coded plastic sleeves.
Set contains the following:
1/2-inch drive six-point metric thin wall deep sockets, 17 mm (yellow); 19 mm (red); and 21 mm (orange); and 13/16 inch (blue)
1/2-inch drive torque extension bars, 80 foot-pounds/110 Nm (yellow); 90 foot-pounds/120 Nm (red); 100 foot-pounds/135 Nm (blue); and 110 foot-pounds/150 Nm (orange)
Product Specifications
Drive: 1/2"
Size: 17, 19, 21 mm; 13/16"
Type: SAE, metric
OAL: Extension bars, 7"
|
|
|
7-Piece 3/8" Drive Long Bit Sets (WT Import) Lot #215 (Sale Order 215 of 1039) Ideal for removing various parts while doing automotive repairs. Drop forged, S2 chrome vanadium steel. Built-in hex screw. Includes blow molded storage case.
Product Specifications
Length: 6"
Drive: 3/8"
Size: 3, 4, 5, 6, 7, 8, 10 mm
Type: Metric ball end
Pieces: 7
|
|
|
100-Piece Industrial Steel Stamp Sets (WT Import) Lot #216 (Sale Order 216 of 1039) With 100 stamps with black oxide finish. Contains the following:
Three of letters A, I, L, N, O, R, S, U; numerals 3, 5, 6, 7, 8, 9, 0
Two of letters B, C, D, F, G, H, J, K, M, P, T, W, X; slash (/); and dash (--)
Four of letter E; numerals 1, 2, 4; and period (.)
One each letters Q, V, Y, Z; one ampersand (&)
Six blanks
One 12-stamp capacity holder with black oxide finish and knurled handle
One hex key
Fitted wooden case
Product Specifications
Size: 1/4"
|
|
|
27-Piece Steel Stamp Sets (USA) Lot #217 (Sale Order 217 of 1039) Sets contain A to Z plus ampersand (&). Hold with hand and strike with hammer, or use several in a type holder (sold separately). Stamps have crowned striking ends that provide full force to stamp center. Sets packaged in durable wooden storage cases.
Two styles are available, machine made or heavy-duty. Machine made offers more marks per dollar with economical, quality steel stamps. Sharp characters are in a Gothic style and ensure clear impressions. Machine made stamps have one thumb groove.
Heavy-duty style is designed to meet all rigid service demands. These stamps are extra heavy with extra length shanks and supporting bevels. They also have character identification and size and three thumb grooves.
Product Specifications
Shank Size: 1/2"
Size: 3/8"
Type: Heavy-duty
Character Size: 3/8"
|
|
|
36-Piece Letter & Number Stamp Set (WT Import) Lot #218 (Sale Order 218 of 1039) Contains letters A to Z; numerals 0 to 8 (6 is used as that number and also as 9); and ampersand (&). Stamps made of S55C carbon steel.
Product Specifications
Pieces: 36
Shank Size: 1/4"
Character Size: 1/8"
|
|
|
36-Piece Steel Stamp Sets (USA) Lot #219 (Sale Order 219 of 1039) Sets are combination letter (A to Z plus a period) and numerals (0 to 8; 6 is used both for that number and for 9). Hold with hand and strike with hammer, or use several in a type holder (sold separately). Stamps have crowned striking ends that provide full force to stamp center. Sets packaged in durable wooden storage cases.
Two styles are available, machine made or heavy-duty. Machine made offers more marks per dollar with economical, quality steel stamps. Sharp characters are in a Gothic style and ensure clear impressions. Machine made stamps have one thumb groove.
Heavy-duty style is designed to meet all rigid service demands. These stamps are extra heavy with extra length shanks and supporting bevels. They also have character identification and size and three thumb grooves.
Product Specifications
Type: Heavy-duty
Size: 1/4"
Character Size: 1/4"
|
|
|
38-Piece Automatic 1/8" Steel Stamp Set (WT Import) Lot #220 (Sale Order 220 of 1039) In wooden case. Contains one each numbers 0 to 8 (6 is used for that number and for 9); letters A to Z; and ampersand (&). Two center punch tips also included. Handle is entirely automatic and fully adjustable.
|
|
|
9-Piece Steel Stamp Sets (USA) Lot #221 (Sale Order 221 of 1039) Sets contain the numerals 0 to 8 (the 6 is used both for that number and for 9). Hold with hand and strike with hammer, or use several in a type holder (sold separately). Stamps have crowned striking ends that provide full force to stamp center. Sets packaged in durable wooden storage cases.
Two styles are available, machine made or heavy-duty. Machine made offers more marks per dollar with economical, quality steel stamps. Sharp characters are in a Gothic style and ensure clear impressions. Machine made stamps have one thumb groove.
Heavy-duty style is designed to meet all rigid service demands. These stamps are extra heavy with extra length shanks and supporting bevels. They also have character identification and size and three thumb grooves.
Product Specifications
Character Size: 3/8"
Type: Heavy-duty
Shank Size: 1/2"
Size: 3/8"
|
|
|
Economy Steel Stamps (WT Import) Lot #222 (Sale Order 222 of 1039) Drop forged and machine made. Packaged in plastic box.
Product Specifications
Size: 1/8" characters
Body Size: 1/4"
Type: 9-piece numeral set
|
|
|
Individual Steel Stamps (USA) Lot #223 (Sale Order 223 of 1039) Steel stamps are held with the hand and struck with a hammer, or use several in a type holder (sold separately). Stamps have crowned striking ends that ensure full force to their centers.
These individual stamps are available in letters, numerals or blanks (used for spacing or filling unused capacity in a type holder).
When ordering, please specify the following:
Order number, holder capacity and type size
Size and quantity of each character desired
Number of blanks between characters for filling or spacing
Product Specifications
Type: Letters & figures
Size: 1/8"
|
|
|
Low Stress Letter Stamp Sets (USA) Lot #224 (Sale Order 224 of 1039) The cutting edge of the character is a 1/32-inch radius, with a 40-degree bevel. The rounded face, full character stamp makes low-stress impressions suitable for use anywhere metal strength is critical.
The aircraft, missile, oil supply and nuclear power industries depend on these stamps to avoid risk of fracture from too sharp of an imprint. Each stamp displays character identification and size and has three thumb grooves for ease of use.
Product Specifications
Type: Letters
Length: 3-1/4"
Net Weight: 8 lbs./set
Size: 3/8"
|
|
|
Low Stress Numeral Stamp Sets (USA) Lot #225 (Sale Order 225 of 1039) The cutting edge of the character is a 1/32-inch radius, with a 40-degree bevel. The rounded face, full character stamp makes low-stress impressions suitable for use anywhere metal strength is critical.
The aircraft, missile, oil supply and nuclear power industries depend on these stamps to avoid risk of fracture from too sharp of an imprint. Each stamp displays character identification and size and has three thumb grooves for ease of use.
Product Specifications
Type: Figures
Length: 3-1/8"
Size: 3/8"
Net Weight: 2.5 lbs.
|
|
|
Power Stamp Kits Lot #226 (Sale Order 226 of 1039) Large 6" Holder for Full Hand Grip. Sets up in any combination of letters, figures, dates or part codes. Prefect character alignment. Holder weighs 1-3/4 lbs. Wooden case included with complete kit. Includes (2) each of B, C, D, F, G, H, J, K,M ,P, T, W, Z, dash,slash mark,period and comma. (1) each of Q,V,Y,Z, ampersand (&).(3) each of A, I, L, N, O, R, S, U, 0, 3, 5, 6, 7, 8, 9, Also (4) each of E, 1 ,2 ,4. Plus spacers and holder.
Product Specifications
Size: 3/8
No. of Pieces: 106
|
|
|
Reversed Steel Stamp Sets (USA) Lot #227 (Sale Order 227 of 1039) Stamps are hand held or else several are placed into a type holder (sold separately); then hammer struck. Mark plastic or rubber molds, thin metal patterns, forged dies, etc. Stamps produce a reversed impression in the mold, which will make a raised letter when the mold is used. Available either in 27-piece (A to Z plus ampersand, "&") or nine-piece (numerals 0 to 8; 6 is used both for that number and for 9). Packaged in durable plastic storage cases.
Product Specifications
Type: 9-piece figure set
Shank Size: 1/2"
Character Size: 3/8"
Size: 3/8"
|
|
|
Type Holders (USA) Lot #228 (Sale Order 228 of 1039) For use with steel type for marking items. Hand models are for marking with multiple characters. Save time with these holders -- you can stamp series of letters or figures into a product or a nameplate with uniform legibility. The type is normally sharp faced Gothic. Blanks are used for spacing or filling unused capacity in the holder. Type not included.
Product Specifications
Capacity: 6
Type Size: 3/8"
Size: 3/8" x 5/8" x 1"
|
|
|
11" Extra Long Angle Cutting Pliers Lot #229 (Sale Order 229 of 1039) Long angle cutting pliers for easier access to tight places.
Product Specifications
Size: 11"
|
|
|
6" Diagonal Cutting Pliers (Crescent) Lot #230 (Sale Order 230 of 1039) For general purpose cutting. Cushioned grips.
|
|
|
8" Cable Cutter (WT Import) Lot #231 (Sale Order 231 of 1039) PVC covered handles. Extra sharp blades are drop forged.
Product Specifications
Size: 8"
|
|
|
8" Code Blue End Cutting Pliers (Channellock) Lot #232 (Sale Order 232 of 1039) Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Jaw Thickness: 1-1/8"
Net Weight: 12 oz.
Length: 8"
Thickness: 1/2" joint
Width: 1-19/32" (joint)
Jaw Lgth: 11/32"
|
|
|
8" Code Blue Lap Joint Cutting Pliers (Channellock) Lot #233 (Sale Order 233 of 1039) High leverage, heavy-duty construction
Laser-hardened teeth provide longer life
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Length: 8"
Jaw Lgth: 25/32"
Thickness: 7/16" (joint)
Net Weight: 11 oz.
Cutting Length: 25/32"
|
|
|
9" Code Blue Cable Cutter (Channellock) Lot #234 (Sale Order 234 of 1039) Heavy-duty design, with carefully balanced, broader handles for better leverage and extra comfort
Closely mated cutters scientifically heat treated to hold their edge
Cuts up to 4/0 aluminum and 2/0 soft copper; not designed for steel or ACSR cable
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Net Weight: 14 oz.
Jaw Lgth: 1-7/16"
Cutting Length: 1"
Length: 9"
Jaw Thickness: 33/64"
Width: 1-5/8" jaw
|
|
|
9" Heavy-Duty Cable Cutter (WT Import) Lot #235 (Sale Order 235 of 1039) Extra sharp blades, drop forged. Black matted PVC-dipped handles.
Product Specifications
Size: 9"
|
|
|
9-1/2" Cable Cutter (Channellock) Lot #236 (Sale Order 236 of 1039) Wiremaster high leverage pliers. Enclosed joint design holds cutters in perfect alignment for the life of the pliers. Heat treated, drop forged, polished high carbon steel cutters. Channellock Blue comfort grips. ISO certified.
Product Specifications
OAL: 9-1/2"
|
|
|
Box Pliers (Channellock) Lot #237 (Sale Order 237 of 1039) Perfectly mated cutters, scientifically heat treated to hold their edge Precision made of fine polished, high carbon steel Distinctive Channellock Blue comfort grips (only for hand comfort and improved appearance; not recommended or warranted for dielectric properties
Product Specifications
Size: 6"
|
|
|
Cutting Pliers (Channellock) Lot #238 (Sale Order 238 of 1039) Curved diagonal for maximum leverage. Box joint. Electronic coating to prevent rusting. Perfectly mated cutters, scientifically heat treated to hold their edge. Channellock Blue comfort grips. ISO certified.
Product Specifications
Length: 7-3/4"
|
|
|
Flexible Diagonal Cutter Pliers (SK) Lot #239 (Sale Order 239 of 1039) Spring loaded for ease of use in repetitive applications
180-degree flexible handles provide easy operation at any angle
Durable cutting edges precision machined and hardened for extended service life
Slip-resistant handles for user comfort and safety
Unique patented design for access in different hard-to-reach areas
Product Specifications
Size: 6.5" L x 2.75" W x .5" H
|
|
|
Diagonal Pliers (WT Import) Lot #240 (Sale Order 240 of 1039) Drop forged and highly polished, with PVC handles. Light-duty pliers are a good general purpose tool. Heavy-duty pliers cut heavy gauge wire with ease.
Product Specifications
Size: 7"
Type: Heavy-duty
|
|
|
Heavy Duty Diagonal Pliers Lot #241 (Sale Order 241 of 1039) Designed for heavy-duty wire cutting. Electronically induction hardened hand-honed, long lasting cutting edges. Made of forged alloy tool steel. Individually tested for strength and cutting ability. Polished head. Red non-slip cushion handle grips.
Product Specifications
Length: 8"
Nose Dia.: 25/32"L x 17/32"W
Thickness: 15/32" max.
|
|
|
Lap Joint Cutting Pliers (Channellock) Lot #242 (Sale Order 242 of 1039) Polished, high carbon drop-forged steel. Lap joint and round nose designs. Channellock Blue comfort grips. Perfectly mated cutters, scientifically heat-treated to hold their edge. ISO certified.
Product Specifications
Size: 8"
|
|
|
Nippers (Channellock) Lot #243 (Sale Order 243 of 1039) Perfectly mated cutter, heat treated to hold its edge. Channellock Blue comfort grips. ISO certified.
Product Specifications
Length: 8"
|
|
|
13" Brass End Dead Blow Hammer (WT Import) Lot #244 (Sale Order 244 of 1039) Brass and dead blow ends.
Product Specifications
Diameter: Brass, 1-1/8"; dead blow, 1-11/16"
Net Weight: 24 oz.
|
|
|
2 lb. Sledge Hammer Lot #245 (Sale Order 245 of 1039) Drop forged, heat-treated head. Fiberglass handle with rubber grip.
Product Specifications
Net Weight: 2 lb.
OAL: 11-3/8"
|
|
|
2.5 lb. Ball Peen Dead Blow Hammer Lot #246 (Sale Order 246 of 1039) One-piece polyurethane construction with tempered steel face. Delivers maximum striking force with dead blow action.
Product Specifications
OAL: 14"
Face Dia: 1.5"
Head Size: 4.75"
|
|
|
Ball Peen Hammers (USA) Lot #247 (Sale Order 247 of 1039) Industrial quality. Forged with machined face, peen and bevel. With hickory handle.
Product Specifications
Head Weight: 40 oz.
OAL: 16"
Size: 40 oz.
|
|
|
Ball Peen Hammers (WT Import) Lot #248 (Sale Order 248 of 1039) Drop forged. With hickory handles.
Product Specifications
Size: 3 lbs.
|
|
|
Black Rubber Mallet Lot #249 (Sale Order 249 of 1039) Rubber Mallets With Hickory Handles Made in the USA
Product Specifications
Head Weight: 1.2 lb.
|
|
|
Black Rubber Mallets (WT Import) Lot #250 (Sale Order 250 of 1039) With hardwood handles.
Product Specifications
Size: Set of 3 -- 1/2, 1, 2 lbs
|
|
|
Blacksmith Hammer Lot #251 (Sale Order 251 of 1039) Designed for striking wood and metal. The cross peen is used for shaping and bending metal. Painted head with polished face; fiberglass handle.
Product Specifications
Head Weight: 3 lbs.
OAL: 15-1/2
|
|
|
Blacksmith's Hammer (WT Import) Lot #252 (Sale Order 252 of 1039) Drop forged. Fiberglass handle with rubber grips.
Product Specifications
Net Weight: 3.6 lbs.
Handle Length: 14"
|
|
|
Brass Hammers (Grace) Lot #253 (Sale Order 253 of 1039) Made specifically for the gun trade, this hammer's solid brass head is machine turned from quality 360 brass and hand polished. The properly seasoned hickory handle is then driven into the finished brass head and securely brass pinned.
Product Specifications
Size: 4.65" head; 1.88" face dia.
Head Weight: 80 oz.
|
|
|
Deluxe 4-Piece Ball Peen Hammer Set Lot #254 (Sale Order 254 of 1039) Fiberglass handle and rubber grip. Drop forged heads. Set consists of 1/2, 3/4, 1 and 1-1/2 pound hammers.
|
|
|
Deluxe 5-Piece Fiberglass Handle Ball Peen Hammer Set Lot #255 (Sale Order 255 of 1039) Drop forged heads. Unbreakable fiberglass handle with rubber grip.
Product Specifications
Size: 1/2 lb., 3/4 lb., 1 lb., 1-1/2 lbs., 2 lbs.
Pieces: 5
|
|
|
COOK Lead Hammers Lot #256 (Sale Order 256 of 1039) Hammers feature a 9.5-inch steel handle with grip that is shock absorbent, high-visibility orange and ergonomic. Lead alloy head.
Product Specifications
Size: 6 lbs.
|
|
|
Dead Blow Hammers (WT Import) Lot #257 (Sale Order 257 of 1039) Quality import hammers.
Product Specifications
Size: 3 lbs.
|
|
|
Dead Blow Hammers (Wiha) Lot #258 (Sale Order 258 of 1039) Applications: Machine tools and gearbox construction, sheet metal and auto repair shops
Medium hard face hammer
Recoiless, with cushioned grip
Steel tube shaft
Preserves sensitive surfaces and edges
Increases striking power
Prevents hand fatigue
Polyurethane shatterless hammer faces are extremely durable, wear resistant and replaceable
Made in Germany
Product Specifications
Handle Length: 6.1"
Head Dia: 2.3"
Length: 14.7"
Size: 72 oz. face
|
|
|
Double Peen Hammers (WT Import) Lot #259 (Sale Order 259 of 1039) Made from drop forged steel with ground and polished heads. Smooth finish hickory handle.
Product Specifications
Length: 15"
Size: 4 lbs.
|
|
|
Hot Cast Dead Blow Hammers Lot #260 (Sale Order 260 of 1039) The dead blow hammer, Trusty-Cook's flagship product, utilizes the benefits of urethane technology providing a truly unique line of hammers. Three models -- standard, slimline and sledge -- are available in a variety of sizes and are molded in a vibrant "safety red." The dead blow's one-piece construction and non-slip comfort grip, combined with the strength and safety of polyurethane, make this hammer a necessity for your toolbox.
Other features are:
No exposed surface metal for improved safety over conventional hammers
Convex-faced heads
No surface marks and cut and split resistant
Non-mushrooming heads and non-bounce impact
Select the Trusty-Cook dead blow hammer especially for your needs…
Standard heads are ideal for an unlimited variety of industrial, automotive and construction operations, including manufacturing, fabrication, assembly, installation and repair.
Slimline heads offer a unique profile ideally suited for all types of assembly and repair operations and are deep-throated to answer the needs of many specialized applications.
Sledge heads are perfectly suited for off-road machinery, railroads, shipyards, petroleum plants, chemical plants and heavy-duty construction projects. Custom comfort handle.
Product Specifications
Size: 7" head; 2-3/4" face dia.
OAL: 20"
Type: Sledgehammer
|
|
|
Non-Sparking Copper Hammers (COOK) Lot #261 (Sale Order 261 of 1039) Will not mar finished iron or steel surfaces. Hickory handles with safety sure-grip.
Product Specifications
Size: 6 lbs.
|
|
|
Plastic Mallets (USA) Lot #262 (Sale Order 262 of 1039) Excellent impact strength. Garland's plastic mallets are made from its own Gar-Dur® ultra-high molecular weight plastic. This nonporous material won't mar and is easy to clean.
Product Specifications
Size: 7
Face Dia: 3"
Head Size: 6"
Net Weight: 30 oz.
|
|
|
Soft Face Hammers Lot #263 (Sale Order 263 of 1039) With tough, replaceable, molded plastic head.
Product Specifications
Size: 8 oz.
OAL: 11-3/4"
|
|
|
Polyurethane Dead Blow Ball Peen Hammers Lot #264 (Sale Order 264 of 1039) Dead blow steel face ball peen hammer heads are tempered alloy steel
Steel shot in head provides for maximum force striking with no rebound
One-piece molded polyurethane construction
New larger steel reinforced handle provides for added strength and safety
More striking power and resistance to breaking than similar brands
Made in the USA in Indianapolis
Product Specifications
Size: 50 oz.
Head Size: 4-13/16"
Face Dia: 1-3/4"
OAL: 16-1/2"
|
|
|
Rawhide Mallets (Garland) Lot #265 (Sale Order 265 of 1039) Designed for long wear under the roughest use. Garland rawhide mallets are ideal for applications calling for striking power over a broad area. Foundry operators, electrical appliance and motor manufacturers and jewelers find them ideal. Made of choice water buffalo rawhide, which will not scratch, mar or spark.
Product Specifications
Face Dia: 2-3/4
Weight (oz.): 24
Size: 6
Head Size: 4-3/4
|
|
|
Rubber Mallets (WT Import) Lot #266 (Sale Order 266 of 1039) With fiberglass handle.
Product Specifications
Size: Set of four -- 1/2, 1, 1-1/2, 2 lbs.
|
|
|
Sledge Hammers Lot #267 (Sale Order 267 of 1039) Painted head with polished faces, hickory handle.
Product Specifications
Head Weight: 12 lbs
OAL: 36"
|
|
|
Sledge Hammers (WT Import) Lot #268 (Sale Order 268 of 1039) Hickory handles. Made from a drop forged steel with ground and beveled faces.
Product Specifications
Size: 8 lbs.
OAL: 36"
|
|
|
Sledgehammers (Wilton) Lot #269 (Sale Order 269 of 1039) Outlasts wood and fiberglass handle sledges by thousands of strikes. Reinforced with tempered steel surrounded by heavy-duty molded rubber. Ergonomic handle absorbs shock and ensures comfort and slip resistant grip. Highly visible sledge head.
Product Specifications
Handle Length: 30"
Size: 14 lb. head
|
|
|
Solid Head Hammers (Garland) Lot #270 (Sale Order 270 of 1039) For any general application requiring assembling, shaping, forcing, loosening or adjusting. Garland® solid head hammers are the logical choice. The tough, resilient water buffalo rawhide face has an extremely long wear life. ISO certified.
Product Specifications
Head Size: 5-5/8"
Face Dia: 2-3/4"
Size: 5
|
|
|
Split Head Hammers Lot #271 (Sale Order 271 of 1039) One hammer does the work of four. Changes faces quickly and easily. Simply loosen the lock nut, drop the lower jaw and insert the right face to fit the job.
Product Specifications
Face Dia: 2-3/4"
Head Size: 5-3/4"
Size: 5
Type: Nylon
|
|
|
Unbreakable Handle Ball Peen Hammers (Wilton) Lot #272 (Sale Order 272 of 1039) Never replace a ball peen handle again! Outlasts wood and fiberglass handles by thousands of strikes. Handle is made with tempered steel and surrounded by heavy-duty molded rubber It is ergonomic, absorbs shock, ensures comfort and has a slip-resistant grip. The high visibility head adds instant identification under any job site conditions and encourages safe work habits.
Product Specifications
Size: 40 oz. head
Handle Length: 14"
|
|
|
Weighted Mallets Lot #273 (Sale Order 273 of 1039) To place your heaviest blow precisely and without scratching, marring or sparking, get Garland® lead-loaded rawhide mallets. Perfectly balanced but powerful, these mallets also feature choice water buffalo rawhide.
Product Specifications
Size: 11
Face Dia: 2-3/4"
Weight (oz.): 40
Head Size: 4-1/4"
|
|
|
1-1/2 lb. Hatchet (WT Import) Lot #274 (Sale Order 274 of 1039) Drop forged. Fiberglass handle, rubber grip and polished head.
Product Specifications
Size: 1-1/2 lbs.
|
|
|
2-1/2 lb. Axe (WT Import) Lot #275 (Sale Order 275 of 1039) Drop forged.
Product Specifications
Size: 2-1/2 lbs.
Handle Length: 24"
|
|
|
4-in-1 Hammer (WT Import) Lot #276 (Sale Order 276 of 1039) Thousands of uses! This one tool serves the purpose of four, and yet costs less than one. Use as a hatchet, as a hammer, a nail puller, or even a wrecking bar. Drop forged, with three polished edges. One-piece steel head and handle with wooden grips.
Product Specifications
OAL: 13"
Net Weight: 1-3/4 lbs.
|
|
|
20" Machete (WT Import) Lot #277 (Sale Order 277 of 1039) Polished blade and plastic handle. Includes sheath.
|
|
|
22" Machete (Nicholson) Lot #278 (Sale Order 278 of 1039) Fully polished high carbon steel blade for durability. Lacquer clear-coated blade resists corrosion. High impact handle with contour and texture to improve control.
Product Specifications
Size: 22"
|
|
|
23-Piece Precision Ultratech Knife & Blade Set Lot #279 (Sale Order 279 of 1039) Offers the versatility of fine, intricate cutting to heavy-duty carving and scraping
Ergonomically designed handle for greater control and comfort
Hex-shaped swivel head prevents rolling
Eight-sided cushion grip with non-slip finish
Solid locking screw chuck holds blades securely in place
Packaged in pocket-sized zippered holder
All Ultratech™ knife handles accept industry standard blades
ISO certified
Set contains:
Two multi-blade handles (#1 and #2)
Five #11 and #16 blades
Three #17 and #22 blades
Two #26 and #28 blades
|
|
|
28-Piece Modeler's Tool Set (WT Import) Lot #280 (Sale Order 280 of 1039) Set contains the following: one each light and medium weight knives, one heavy-duty knife, one hobby awl, one miter box, one razor saw, one sander, one screwdriver, and 20 assorted blades. Packaged in a chest with snap-lock closures.
|
|
|
5-Piece Replacement Knife Blades (USA) Lot #281 (Sale Order 281 of 1039) Blade pack fits most three-position utility knives
|
|
|
AR 3.00 Series Folding Knives (Gerber) Lot #282 (Sale Order 282 of 1039) An amazing knife that combines superior materials with distinct design features. The blades are made of 440 stainless steel and have a right and left thumb stud for easy opening with either hand. Blades are available in stainless or black Teflon coated.
The handle is made from aircraft-grade aluminum and has Kraton rubber inserts on the side and top that are molded through the aluminum. This guarantees that they will not work loose over time. The AR series also features a removable stainless steel pocket clip. Covered by limited lifetime warranty.
Product Specifications
Style: AR 3.0S
Length: 3" blade
Type: Stainless finish, serrated blade
OAL: 7" open, 4" closed
|
|
|
AccuSharp Knife & Tool Sharpener Lot #283 (Sale Order 283 of 1039) Sharpen knives in 10 seconds. Also sharpens cleavers, axes, hoes and many other tools. Not designed for sharpening scissors. Full length guard to protect fingers. Sharpening stones are diamond honed tungsten carbide. Will not rust.
|
|
|
Carton Cutter (WT Import) Lot #284 (Sale Order 284 of 1039) Blade retracts into handle for safe carrying. Razor blade pack sold separately and contains 100 single-edge blades.
Product Specifications
Type: Single edge razor blades, 100 pcs.
|
|
|
Carton Knife (WT Import) Lot #285 (Sale Order 285 of 1039) Polished hardwood handle and curved blade of tempered steel.
Product Specifications
OAL: 7-1/2"
Blade: 2-1/2"
|
|
|
Gerber SuperKnife UltraShear Shears Lot #286 (Sale Order 286 of 1039) The SuperKnife™ UltraShear® from Gerber Legendary Blades is an anvil-style cutter designed to use contractor-grade utility knife blades.
8.25 inches in length
Contoured rubber grip handle
Blades easily replaced
Offers quality, affordability and convenience
Cuts rope, hose, plastic, vinyl and rubber; even prune the garden or trim a cigar
|
|
|
Great Neck Snap Blade Knife Lot #287 (Sale Order 287 of 1039) With 13 positions and handy pocket clip.
|
|
|
Heavy-Duty Snap Blade Knife (WT Import) Lot #288 (Sale Order 288 of 1039) Knife cuts through tough leather, film, rubber, vinyl or plastic. Includes one strip of seven points.
|
|
|
Light-Duty Precision Hobby Knife (General) Lot #289 (Sale Order 289 of 1039) For making intricate cuts in lighter materials
Great for use on wallpaper and softer woods
Surgically sharp cutting blades are replaceable and interchangeable
Aluminum handle with knurled grip
Locking screw chuck holds blades firmly in place
|
|
|
Locking Knife (WT Import) Lot #290 (Sale Order 290 of 1039) Stainless steel clip blade with ambidextrous thumb studs for one-handed opening. Lightweight, ergonomic plastic handle with pocket clip.
Product Specifications
Blade Length: 2-1/2"
|
|
|
PowerGrip Utility Knife (Fiskars) Lot #291 (Sale Order 291 of 1039) Ergonomically designed to encourage neutral hand position, for greater comfort and ease of use. Cuts cloth, leather, vinyl, cardboard, plastic and much more.
|
|
|
E-Z Out Brand Folding Pocket Knives (Gerber) Lot #292 (Sale Order 292 of 1039) The combination of size, shape and one-handed opening have made the Gerber E-Z Out® knife a favorite amongst sportsmen, tradesmen and outdoor enthusiasts. These knives feature a durable surgical stainless steel blade. A stainless steel pocket clip provides easy access. SoftGrip® inserts are fused into a virtually indestructible polycarbonate handle for superior grip and feel.
Product Specifications
Type: Regular clip point w/serrated blade
Length: 3.5" blade
|
|
|
Gator Folding Pocket Knives (Gerber) Lot #293 (Sale Order 293 of 1039) Ever notice how alligators are completely indifferent to the weather? Well, these prized knives are kind of the same, because they perform to their fullest, whether the conditions are wet or dry. If there's a job to be done, Gerber's Gator® folders are more than up to it.
The Gator folder employs advanced thermoplastics with an alligator skin texture to deliver a stunningly reliable, ultimately comfortable grip. Who could have guessed that the feel of reptile scales would be so satisfying? Each Gator comes with a lock-back mechanism. And each has a blade made of surgical stainless steel that's as rugged as they come.
Product Specifications
Type: Gator clip point w/serrated blade
Size: 3.75" blade
|
|
|
SuperKnife SK Edge Aluminum Utility Knife (Gerber) Lot #294 (Sale Order 294 of 1039) Constructed of stainless steel and aluminum. Features a one-piece blade holder to ensure the blade will be held tightly under pressure. Thumb stud and liner lock allow for easy one-handed opening and closing. Accepts standard and contractor grade utility knife blades. With one-step blade change, just press the thumb stud to release. No tools required.
Product Specifications
Includes: Complete knife
|
|
|
SuperKnife SK Edge Rubberized Knife (Gerber) Lot #295 (Sale Order 295 of 1039) The rubberized SuperKnife™ features the same stainless steel blade holder as the original SuperKnife Edge® but with a thicker, rubberized, textured handle. Features an ergonomic belt clip and convenient lanyard hole on the handle.
When folded up, this knife compacts to a convenient 3.5 inches. It is crafted from high-quality aircraft material.
Blade changing is a snap with the blade removal service tool. With just a press of a button, which doubles as a thumb stud, the blade can be released and replaced with virtually any standard utility knife blade, from the .016-inch (1/64-inch) extra thin blade to the .039 (1 mm) contractor grade blade.
|
|
|
Worker Utility Knife (WT Import) Lot #296 (Sale Order 296 of 1039) Die-cast metal handle and two-position blade. Includes two blades, which store inside the handle
|
|
|
Retractable Utility Knives (Lutz) Lot #297 (Sale Order 297 of 1039) Heavy-duty industrial quality
Vertical recessed ribs for a better, more comfortable grip
Zinc retractor for smoother operation
Three cutting positions
Die-cast zinc handle comes with three .025-inch blades
Safety nose; top and bottom overlap for additional security
Product Specifications
Type: High visibility green
|
|
|
Trendy Folding Pocket Knife (Gerber) Lot #298 (Sale Order 298 of 1039) Gerber could have called it strong or stylish. But no matter how you refer to the Trendy® clip folder, you're talking about a very good-looking knife that's built to perform, as if looks don't matter a lick. So despite its fairly casual name, the Trendy is serious stuff.
This knife opens with almost no effort, thanks to the thumb notch at the top of the highly durable, Teflon coated, surgical stainless steel blade. And the distinctive handle makes a pretty good money clip as well.
The Trendy may well be the most natural stow-and-go knife Gerber has ever made, because it's just 3 inches when closed and clipped in your pocket. It's a nimble, versatile folder that more than holds its own in a world of wannabe knives. Two handle styles available.
Product Specifications
Type: Fine blade
Style: Trendy Beadblast
Size: 2.25" blade
|
|
|
Winchester Brass Folding Knives Lot #299 (Sale Order 299 of 1039) Made for Winchester by Gerber Legendary Blades. Attractive hardwood handle with brass bolsters. Surgical stainless steel blade.
Product Specifications
Blade Length: 3.5"
Type: Brass folding w/fine blade; sheath
|
|
|
1 Ft. Dual Wheel Measuring Wheels Lot #300 (Sale Order 300 of 1039) Widely used by contractors, utilities, accident investigators, real estate agents and landscapers. Medium-duty linear measuring wheels are used for estimating distances on smooth surfaces indoors and out. Five-figure display has bold 0.2-inch high numerals. Lightweight design eases handling, and the reset button is protected by a raised collar. Bright orange color increases visibility.
Product Specifications
Type: Curved handle
Diameter: 1 ft. wheel
Warranty: Lifetime
Size: 44" extende; 28" stored
|
|
|
3 ft. Single Measuring Wheel Lot #301 (Sale Order 301 of 1039) Widely used for estimating by contractors, accident investigators, landscapers, surveyors, real estate agents and farmers. A sturdy, multi-purpose measuring wheel, best suited for quick and easy measuring over a variety of surfaces. Features a five-figure display with bold 0.2-inch high numerals. Capable of counting to 10,000 feet. Lightweight design eases handling, and the reset button is protected by a raised collar. Available with multi-position curved handle.
Product Specifications
Size: 48" extended, 32" stored
Diameter: 11-1/2" wheel
Warranty: Lifetime
|
|
|
4 ft. Single Measuring Wheel Lot #302 (Sale Order 302 of 1039) This heavy-duty measuring wheel is best suited for outdoor use, recording long distances over a variety of surfaces, including rough terrain. Widely used for estimating by contractors, agriculturists, surveyors and landscapers. Lightweight design eases handling and reduces fatigue. Capable of counting 100,000 feet. Bright orange wheel enhances visibility, and the fold-down handle reduces storage space.
Product Specifications
Size: 40" extended; 24" stored
Warranty: Lifetime
Diameter: 15.3" wheel size
Includes: Stand
|
|
|
5-Piece Metric Nut Driver Set (WT Import) Lot #303 (Sale Order 303 of 1039) Chrome plated, knurled handles with swivel heads. Holes in the handle and a 1-3/8 inch long pin. Includes plastic case.
Product Specifications
Size: 3, 3.5, 4, 4.5, 5 mm
|
|
|
5-Piece Precision Nut Driver Set (General) Lot #304 (Sale Order 304 of 1039) Chrome plated vanadium steel blade ensures long life
Large swivel head offers greater control
Hardened tip and shaft perform maximum workloads
Blasted tip provides maximum torque and grip
Shaft winged and embedded 2 inches into the handle to prevent slippage
Patented ergonomically designed handle for rapid rotation and greater comfort and control
Heat treated carbon steel nickel plated blade and sockets
Large swivel head for greater control
Product Specifications
Pieces: 5
Size: 3/32", 1/8", 5/32", 7/32", 1/4"
|
|
|
7-Piece Hollow Shaft Nut Driver Set (Sunex) Lot #305 (Sale Order 305 of 1039) Newly designed comfort grip handle (patent pending)
Hardened chrome vanadium steel shafts
Includes heavy-duty plastic tray for easy storage
Hex bolstered shafts for maximum turning power
Hollow shafts allow for deep applications
Nut drivers are 4 inches long
Product Specifications
Size: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
Type: SAE
|
|
|
7-Piece Nut Driver Set (WT Import) Lot #306 (Sale Order 306 of 1039) Plastic handles and drop forged plated sockets.
Product Specifications
Size: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
|
|
|
Nut Drivers Lot #307 (Sale Order 307 of 1039) Impact resistant plastic handles. Solid shaft.
Product Specifications
Size: 1/2"
|
|
|
25 ft. Drain Cleaner (WT Import) Lot #308 (Sale Order 308 of 1039) Drain cleaner has a corkscrew head that snakes right through the drain to clear blockages. Spring rod stores in drum. Plastic construction.
Product Specifications
Diameter: 1/4" spring rod
Length: 25 ft.
|
|
|
6 ft. Drain Cleaner (WT Import) Lot #309 (Sale Order 309 of 1039) Designed for quick cleaning of a stopped drain.
|
|
|
6-Piece Tube Bender Set (WT Import) Lot #310 (Sale Order 310 of 1039) Import product
Product Specifications
Size: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
|
|
|
6-Piece Tubing Tool Kit (WT Import) Lot #311 (Sale Order 311 of 1039) This kit has all the necessary tools for the do-it-yourselfer:
Flaring tool for 3/16- to 5/8-inch tubes
Tubing cutter with 1/8- to 1-1/8 inch capacity
Three tubing benders, sizes 1/4, 5/16 and 3/8 inch
Sturdy storage box
|
|
|
9" PVC Pliers Lot #312 (Sale Order 312 of 1039) Capacity, 3-inch maximum pipe. With plastic coated handles.
|
|
|
Basin Wrench (WT Import) Lot #313 (Sale Order 313 of 1039) Swinging adjustable open end. For cramped areas under the sink. Teeth are precision cut to grip firmly. Forged alloy steel spring loaded jaws. Head swings 180 degrees for use at any angle.
Product Specifications
OAL: 11"
|
|
|
Conduit Bender (WT Import) Lot #314 (Sale Order 314 of 1039) A perfect bend every time
Vials -- one each 45 and 90 degrees
Bends 1/2-inch thin wall conduit to 5 inches
Cast in markings for 22-, 30-, 45- and 90-degree bends
Foot pedal for extra leverage
Utilizes 1-inch diameter handle (not included)
|
|
|
Double Flaring Tool (General) Lot #315 (Sale Order 315 of 1039) Specially designed to double flare tubing for high pressure applications in automotive, air conditioning and refrigeration
Accurately single or double flares copper, aluminum and thin walled tubing for leak free connections
Quick opening plated steel bars for easy insertion and removal of tubing
Plated forged yoke for accurate flaring
Double flare inserts are case hardened steel
All parts have rust-resistant finish
Product Specifications
Capacity: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
|
|
|
E-Z Ratchet Tubing Cutter (General) Lot #316 (Sale Order 316 of 1039) Cuts copper, brass, aluminum tubing and thin walled conduit
Ratcheting action design rotates the cutter around the tube, allowing this standard sized cutter to be used in close quarter applications
Longer handle requires less effort to rotate cutter, which reduces hand fatigue
Wide hardened flared clearance grooved rollers allow true cuts close to flared end tubing to avoid replacement in existing installations
Spare cutting wheel in handle
Uses tool steel cutting wheels Models RW121/2, RW122 and RW122p
Product Specifications
Capacity: 1/8 - 1-1/8"
|
|
|
Enclosed Feed Cutter (General) Lot #317 (Sale Order 317 of 1039) Feed is enclosed to keep tool size consistent for work in confined spaces
Enclosed threads seal out dirt for long life
Wide hardened flared groove rollers
Hardened steel retractable reamer with built-in gas bottle wrench
Replaceable tool steel cutter wheel plus extra cutter wheel.
Conforms to government specifications GGG-C-771d
Product Specifications
Capacity: 1/8" - 1-1/8"
|
|
|
Geared Ratchet, Lever Type Tube Bender Lot #318 (Sale Order 318 of 1039) These tools, with high geared mechanical ratios, bend heavy wall steel tube (up to 1/8 inch wall thickness) and hard copper water tube (types K & L). Benders produce uniform bends up to 180 degrees, with no need to anneal tubing or use special temper grade tubing. Radius of 3 inches to center of tube; 5/8 inch OD tube.
Product Specifications
Net Weight: 7.5 lbs.
|
|
|
Heavy-Duty PVC Pipe Cutter (General) Lot #319 (Sale Order 319 of 1039) For repeated heavy-duty cutting. Cuts PVC, CPVC and polyethylene. Ratchet action for easy cutting. High carbon steel blade provides longer sharpness and clean cuts. Aluminum body is lighter and corrosion resistant. Safety locking clasp.
Product Specifications
Length: 17"
Capacity: 2" max.
|
|
|
Heavy-Duty Tubing Cutter (General) Lot #320 (Sale Order 320 of 1039) Provides comfort during heavy-duty and industrial applications
Tool steel cutter
Wider, hardened flared grooved rollers allow cuts close to a flared end to avoid tube replacement in existing installations
Full size fold-out reamer
Easy turn knob
Extra cutting wheel; uses replaceable cutting wheel Models RW121/2, RW122, RW122P.
Product Specifications
Capacity: 1/4" to 1-5/8"
|
|
|
Hose & Tubing Cutter (General) Lot #321 (Sale Order 321 of 1039) Cuts flexible rubber, PVC, ABS and polyethylene tubing. Long handle provides added leverage for easy cuts. Curved holder supports hose to ensure square cuts. Replaceable steel blade.
Product Specifications
Includes: Cutter
Capacity: 1"-2"
|
|
|
Magnum Mini Tubing Cutter (General) Lot #322 (Sale Order 322 of 1039) The professional's choice in a super mini tubing cutter is General's, which has all the features of a standard cutter with the swing radius of the smaller size (1-23/32 inches).
Features:
Cuts copper, aluminum and brass thin walled tubing
Slide lock reamer
Comfort grip design for easy turning
Full size tool steel cutter wheel
Large fluted adjusting knob
Wide hardened flared groove rollers
Spare cutting wheel is Model RW121 and is replaceable
Product Specifications
Capacity: 1/8" - 1-1/8"
|
|
|
Micro Tubing Cutter (General) Lot #323 (Sale Order 323 of 1039) Cuts copper, aluminum, brass and thin walled tubing
Needs only 1-3/8 inches swing radius of working clearance
Comfort grip design for easy turning
Full size tool steel cutter wheel
Large fluted adjusting knob
Wide hardened flared groove rollers
Uses replaceable cutting wheel Model RW121/2
Product Specifications
Capacity: 1/8"-5/8"
|
|
|
Midget Tubing Cutter (WT Import) Lot #324 (Sale Order 324 of 1039) Requires very little clearance to cut a perfect right angle. Hardened cutter wheel.
Product Specifications
Capacity: 1/8"-5/8" OD
|
|
|
Flaring Tool (RIDGID) Lot #325 (Sale Order 325 of 1039) Provides smooth uniform 45-degree SAE flares with minimum effort, even on large sizes
Large feed screw handle turns easily
Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling
Easy release when flare is fully formed
Tubing sizes are clearly marked
ISO certified
Product Specifications
Size: 3/16", 1/4", 5/16", 3/8", 1/2" OD tubing
|
|
|
Heavy-Duty Pipe Cutters (RIDGID) Lot #326 (Sale Order 326 of 1039) Gives fast, clean pipe cutting by hand or power
Extra long shank protects adjustment threads
Extra large handle for quick, easy adjustment
Balanced frame of special malleable iron
Equipped with tough blade cutter wheel
Can convert to three-wheel cutter by replacing rollers with cutter wheels
Replacement parts available
ISO certified
Product Specifications
Size: 1/8"-2" capacity
Type: Complete cutter tool
Net Weight: 7-1/4" lbs.
|
|
|
Mini Tubing Cutter (General) Lot #327 (Sale Order 327 of 1039) Needs only 1-1/2 inches swing radius of working clearance
Comfort grip design for easy turning
Full size tool steel cutter wheel
Large fluted adjusting knob
Cuts copper, aluminum and brass thin walled tubing
Wide hardened flared groove rollers
Uses replaceable cutting wheel RW121/2
Product Specifications
Capacity: 1/8"-7/8"
|
|
|
Plastic Nut Basin Wrench (RIDGID) Lot #328 (Sale Order 328 of 1039) Designed to reach and turn plastic mounting nuts on faucets, sprayers and ball cocks. The notched ends are designed to self-center on two-, three-, four- and six-tab nuts and to fit metal and plastic 1-inch hex nuts. Made of 16-gauge cold rolled steel, with 11-inch tubular steel body.
|
|
|
Plastic Pipe & Tube Cutter (RIDGID) Lot #329 (Sale Order 329 of 1039) Features a compound leverage ratchet mechanism and hardened steel blade. One hand operation. After the cut, simply depress the return latch. The spring loaded blade instantly retracts into the guard. The housing is made of lightweight aluminum. ISO certified.
Product Specifications
Net Weight: 1-1/4 lbs.
Size: 1/8" - 1-1/2" OD capacity
|
|
|
Quick Opening Flaring Tool (WT Import) Lot #330 (Sale Order 330 of 1039) For easy efficient flaring of tubing. Easy opening hinge bars. Nodular metal screw yoke. Uni-chrome plated bars. Includes free turning cone. Note: product may vary from the image.
Product Specifications
Capacity: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"
|
|
|
Ratchet-Action PVC Pipe Cutter Lot #331 (Sale Order 331 of 1039) Heat-treated blades. 1/8 - 1-1/4 capacity. Use for cutting all types of plastic and fabric reinforced rubber pipe and tubing.
|
|
|
Midget Tubing Cutters (RIDGID) Lot #332 (Sale Order 332 of 1039) For up to 15/16 inch OD tubing. These tubing cutters are specifically designed for use in extra close quarters on small size hard and soft copper, aluminum, brass and plastic tubing.
Two rollers opposite cutter wheel permit easier rotation and faster cutting. Slide and wheel housing are strong and lightweight. Large knurled feed screw knob gives easy control of cutting pressure for clean cuts. Replacement parts available. ISO certified.
Product Specifications
Size: Up to 15/16" OD capacity
Radius: 1-11/16" max.
|
|
|
Super Mini Tubing Cutter (General) Lot #333 (Sale Order 333 of 1039) Needs only 1-11/16 inches swing radius of working clearance
Comfort grip design for easy turning
Full size tool steel cutter wheel
Large fluted adjusting knob for greater torque on pipe
Cuts copper, aluminum and brass thin walled tubing
Wide hardened flared groove rollers
Replaceable cutting wheel RW121/2
Product Specifications
Capacity: 1/8" - 1-1/8"
|
|
|
Triplet Tube Bender (WT Import) Lot #334 (Sale Order 334 of 1039) One tool bends three sizes of tubing in annealed copper, brass, steel, aluminum, stainless steel and other metals. Bender has calibrated markings.
Product Specifications
OAL: 8"
Capacity: 1/4", 5/8", 3/8"; 6 & 8 mm
|
|
|
Tube Tri-Bender (RIDGID) Lot #335 (Sale Order 335 of 1039) The 465 tri-bender is designed to easily bend three different sizes of soft tubing -- 1/4, 5/16 and 3/8 inch -- with the same tool. Ideal for plumbing and HVAC applications. A 90-degree start angle minimizes effort required to form a bend. Handy reference marks indicate the angle for quick bends through 90 degrees. Lightweight. ISO certified.
Product Specifications
Net Weight: 14 oz.
Capacity: 1/4", 5/16", 3/8"
|
|
|
Tubing Bender (WT Import) Lot #336 (Sale Order 336 of 1039) Makes difficult bends in copper and steel tubing without collapse. Specially designed rollers have two grooves on each end for ease in adapting the tool to a specific tubing size.
Product Specifications
OAL: 10-1/2"
Net Weight: 1 lb., 11 oz.
Capacity: 3/16", 1/4", 5/16", 3/8"
|
|
|
Tubing Cutter Lot #337 (Sale Order 337 of 1039) Newly redesigned contoured shape comfort grip design
Tool steel cutter wheel
Wide hardened flared clearance grooved rollers allow cuts close to a flared end to avoid tube replacement in existing installations
Full size fold-out reamer with double cutting edges
Large knob with a covered extra cutter storage space
Uses replaceable cutting wheels RW121/2, RW122, RW122P
Product Specifications
Capacity: 1/8" - 1-1/8"
|
|
|
Tubing Cutter with Double Roller (WT Import) Lot #338 (Sale Order 338 of 1039) With retractable reamer blade.
Product Specifications
Capacity: 1"
|
|
|
Under-Sink Drain Pliers (General) Lot #339 (Sale Order 339 of 1039) Save precious room in your toolbox with General’s all-in-one under-sink drain pliers. The exclusive, universal jaw design will fit all sink, drain, slip, trap and compression nuts, as well as basin and sink lock nuts.
The three-position slip joint allows the pliers to work on all 1-1/4, 1-1/2 and 2 inch drain systems. And with a 4-inch jaw opening, the pliers will fit large strainer nuts and can even be used for opening jars and removing automotive oil filters.
Pliers include a set of removable rubber jaw covers to protect plated nuts or pipes from damage. The rubber jaws also make the tool safe for use on plastic nuts.
Product Specifications
Capacity: 1-1/4", 1-1/2", 2" drain systems
Net Weight: 1.7 lbs.
Opening: 4" jaw
|
|
|
Tubing Cutters (RIDGID) Lot #340 (Sale Order 340 of 1039) Cuts copper, brass or aluminum tubing and thin walled conduit
No burr or distortion; rollers smooth tube for soldering
Light yet strong construction, and tracks true
Special heavy-duty wheel for steel and stainless steel
Handy fold-in reamer protects hands and pockets
ISO certified
Product Specifications
Size: 1" - 3-1/8" capacity
Weight (oz.): 3-1/2 lbs.
|
|
|
10" Fence Tool Pliers (WT Import) Lot #341 (Sale Order 341 of 1039) Made of alloy steel with cushion grip handles. Easily grips and works with wire and staples. Hammer integrated into jaw.
|
|
|
10" Heavy-Duty Fence Tool Pliers (Crescent) Lot #342 (Sale Order 342 of 1039) Two staple grips in nose
Corrugated hammer head with heavy prong, easily reaches and pulls rusty staples
Special opening in head allows both wire and staple to be gripped
Two electronically induction hardened durable wire cutters
Made of forged alloy tool steel with polished head
Red non-slip cushion handle grips
ISO certified
Product Specifications
Capacity: 11 AWG
Size: 10-7/16" OAL; 1-1/16" nose
Thickness: 19/32"
|
|
|
10-1/2" Fence Tool Pliers (Channellock) Lot #343 (Sale Order 343 of 1039) Heavy-duty construction
Specially designed for installing and maintaining wire fence on metal and wood posts
Six tools in one -- staple starter, hammer, two staple pullers, wire stretcher, wire splicer and two wire cutters
Precision made of fine polished high carbon drop-forged steel
Channellock Blue® comfort grips are only for hand comfort and improved appearance; not recommended or warranted for dielectric properties
Product Specifications
Net Weight: 22.83 oz.
Width: 3"
Jaw Lgth: 3/4"
Length: 10.5"
Jaw Thickness: 17/32"
|
|
|
11" Extra Long Needle Nose Pliers (WT Import) Lot #344 (Sale Order 344 of 1039) Drop forged with black matte PVC handles.
Product Specifications
Type: Set of 4 -- straight, 20°, 45°, 90°
|
|
|
14-Piece Precision Tool Set Lot #345 (Sale Order 345 of 1039) Set contains the following:
One each 4-1/2 inch diagonal and long-nose pliers
Slotted screwdrivers, 1.5, 1.8, 2.0, 2.5, 3.0 millimeters
Phillips screwdrivers, sizes #000, #00, #0
Hex screwdrivers, sizes 5/64, 3/32, 7/64, 1/8 inch
|
|
|
2-Piece Pliers Set (Channellock GS-2) Lot #346 (Sale Order 346 of 1039) Set has Models 420 (9.5-inch tongue and groove) and 337 (7-inch cutting)
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures a no slip jaw action
Patented reinforcing edge minimizes stress breakage
Patented PermaLock® fastener eliminates nut and bolt failures
Distinctive Channellock Blue comfort grips (only for hand comfort and improved appearance; not recommended or warranted for dielectric properties)
ISO certified
Product Specifications
Net Weight: 2 lbs.
Size: 7" cutting; 9-1/2" tongue & groove
|
|
|
3-Piece Flexible Pliers Set (SK) Lot #347 (Sale Order 347 of 1039) Spring loaded for ease of use in repetitive applications
Flexible 180-degree handles provide easy operation at any angle
Durable cutting edges precision machined and hardened for extended service life
Slip-resistant handles for user comfort and safety
Unique patented design for access in different hard-to-reach areas
Set is packaged in a tray
Product Specifications
Pieces: 3
Size: 7" linesman, 6-1/2" diagonal, 7" needle nose
|
|
|
3-Piece Hose Grip Pliers Set (WT Import) Lot #348 (Sale Order 348 of 1039) Drop forged with PVC coated handles.
Product Specifications
Jaw Capacity: 3/8", 1/2", 3/4" dia. hoses
Length: 11"
|
|
|
3-Piece Pliers Set (Channellock GS-4) Lot #349 (Sale Order 349 of 1039) Set contains Model 430 10-inch tongue and groove pliers; Model 3017 7.5-inch long-nose pliers; and Model 337 7-inch cutting pliers
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures a no slip jaw action
Patented reinforcing edge minimizes stress breakage
Patented PermaLock® fastener eliminates nut and bolt failures
Distinctive Channellock Blue comfort grips (only for hand comfort and improved appearance; not recommended or warranted for dielectric properties)
Product Specifications
Size: 7-1/2" long nose; 10" tongue & groove; 7" cutting
|
|
|
5" Precision Flat Nose Pliers (WT Import) Lot #350 (Sale Order 350 of 1039) With PVC handles.
|
|
|
5-Piece Channellock Code Blue Tool Roll Lot #351 (Sale Order 351 of 1039) 8WCB 8-inch adjustable wrench
369CB 9-inch high-leverage linemen's pliers
318CB 8.5-inch long-nose pliers with cutter
338CB 8-inch cutting pliers -- lap joint
430CB 10-inch tongue and groove pliers
|
|
|
5-Piece Mini Pliers Set (WT Import) Lot #352 (Sale Order 352 of 1039) Set consists of one each diagonal, long nose, flat nose, bent nose and end cutters.
Product Specifications
Pieces: 5
OAL: 5"
|
|
|
6" Bent Nose Combination Slip Joint Pliers (Crescent) Lot #353 (Sale Order 353 of 1039) Designed for gripping, turning round objects such as pipes, rods and pins
Extra thin, straight nose combination pliers
Machined gripping teeth and wire cutter for confined places
Forged from carbon steel, accurately machined, hardened and tempered and with chromium plating
Red non-slip cushion handle grips
Product Specifications
Length: 6-3/4"
Jaw Capacity: 1"
|
|
|
6" Bent Nose Pliers (WT Import) Lot #354 (Sale Order 354 of 1039) Side cutting. Chrome vanadium steel, plated and polished. Plastic grip handles.
|
|
|
6" Long Nose Pliers (Crescent) Lot #355 (Sale Order 355 of 1039) Designed for reaching confined areas
Long chain nose with fine serrated jaws to make wire loops and bends
Electronically induction hardened hand-honed, keen side cutting edges
Made of forged alloy tool steel
Individually tested for strength and cutting ability
Polished head
Red non-slip cushion handle grips
ISO certified
|
|
|
6-Piece Mini Pliers Set (WT Import) Lot #356 (Sale Order 356 of 1039) Set contains one of each long nose, flat nose, bent nose, diagonal, end cutter and duck bill. Highly polished, with PVC coated handles.
Product Specifications
OAL: 5"
|
|
|
8" MIG Welder's Pliers (WT Import) Lot #357 (Sale Order 357 of 1039) Drop forged and heat treated
Needle nose grip wire for pulling
Sharp edges for cleaning inside nozzle and around tips
Small serrated hole for MIG tips
Flat surfaces for light hammering
Wire cutter for trimming MIG wire
Large serrated hole for nozzles
Spring-loaded handle
Heavy insulated grip for comfort
|
|
|
8-Piece Channellock Code Blue Tool Roll Lot #358 (Sale Order 358 of 1039) Set contains the following Code Blue tools:
430CB 10-inch tongue and groove pliers
420CB 9.5-inch tongue and groove pliers
318CB 8.5-inch long-nose pliers with cutter
338CB 8-inch cutting pliers -- lap joint
358CB 8-inch end cutter
909CB 9.5-inch crimping tool
911CB 9-inch cable cutter
369CB 9-inch high-leverage linemen's pliers
|
|
|
9" Code Blue High Leverage Lineman's Pliers (Channellock) Lot #359 (Sale Order 359 of 1039) Rounded nose
Includes stripper and crimper
High leverage design
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Jaw Lgth: 1-17/32"
Cutting Length: 47/64"
Net Weight: 17 oz.
Thickness: 35/64" joint
Width: 1-5/16" joint
Length: 9"
|
|
|
9-1/2 Code Blue Crimping & Cutting Tool (Channellock) Lot #360 (Sale Order 360 of 1039) Precision crimping dies and cutters
Designed for crimping of both insulated and non-insulated solder-less connections and terminals on 10 to 22 AWG wire
Slim nose shape for tight places
Polished high carbon, drop forged American made steel with electronic coating to prevent rusting
Grips have a Santoprene™ core with TPR-rubber overmold which composites for durability, comfort and secure grip
Code Blue designation means it's easy to find the right pliers for the right job
Product Specifications
Width: 1-5/16"
Jaw Thickness: 31/64"
Net Weight: 15 oz.
Length: 9.5" (1-5/32" jaw, 17/32" cutter)
Jaw Lgth: 1-5/32"
Cutting Length: 17/32"
|
|
|
9-1/2" Linemen's Pliers (Channellock) Lot #361 (Sale Order 361 of 1039) Exclusive joint path that guides fish tape without kinking, binding, bending or breaking
Built-in 12 AWG wire stripper and recess for creating wire loops fast
Crimper for both insulated and non-insulated wires
Perfectly mated cutter, heat treated to hold its edge
Polished high carbon drop forged steel
Useful crushing area between handles and joint
ISO certified
Channellock Blue comfort grips
Product Specifications
Cutting Length: 47/64"
Jaw Lgth: 1-17/32"
Width: 1-5/16"
Jaw Thickness: 35/64"
Net Weight: 17 oz.
Length: 9-1/2"
|
|
|
926 Retaining Ring Pliers (Channellock) Lot #362 (Sale Order 362 of 1039) Heat treated steel
Convert from internal snap rings to external with the flip of a switch
Five pairs of interchangeable tips (three straight and two 90-degree) -- like 10 tools in one
Heavy-duty return spring
Channellock Blue grips for comfort
Product Specifications
Range: External, 1/8"-1"; internal, 1/4"-1"
OAL: 6-1/4"
|
|
|
927 Retaining Ring Pliers (Channellock) Lot #363 (Sale Order 363 of 1039) Convert from internal snap rings to external with the flip of a switch
Heavy-duty return spring
Channellock Blue grips for comfort
Five pairs color coded interchangeable tips -- three straight and two 90-degree -- like having 10 tools in one
Product Specifications
Range: External, 1/4"-2"; internal, 3/8"-2"
OAL: 8"
|
|
|
Air Brake Tool (Channellock) Lot #364 (Sale Order 364 of 1039) For trucks and trailers with S-cam brake system using manual or automatic slack adjusters
Provides fast check of brake clearance between drum and brake shoe
Right angle teeth grip in all directions for maximum bite and minimum wear
Patented undercut tongue and groove design assures a no-slip jaw action
Seven adjustments
Patented reinforcing edge minimizes stress breakage
Patented PermaLock® fastener eliminates nut and bolt failures
Distinctive Channellock Blue® comfort grips are only for hand comfort and improved appearance; not recommended or warranted for dielectric properties
Product Specifications
Capacity: 2-1/4"
Jaw Thickness: 5/16"
Net Weight: 20.67 oz.
Length: 12"
Jaw Lgth: 1-1/2"
|
|
|
Combination Slip Joint Pliers (WT Import) Lot #365 (Sale Order 365 of 1039) Drop forged and chrome plated.
Product Specifications
Size: Set of 3 -- 6", 8", 10"
|
|
|
Flexible Linesman Combination Pliers (SK) Lot #366 (Sale Order 366 of 1039) Spring loaded for ease of use in repetitive applications
180-degree flexible handles provide easy operation at any angle
Durable cutting edges precision machined and hardened for extended service life
Slip-resistant handles for user comfort and safety
Unique patented design for access in different hard-to-reach areas
Product Specifications
Size: 7" L x 2.75" W x .5" H
|
|
|
Flexible Needle Nose Pliers (SK) Lot #367 (Sale Order 367 of 1039) Spring loaded for ease of use in repetitive applications
180-degree flexible handles provide easy operation at any angle
Durable cutting edges precision machined and hardened for extended service life
Slip-resistant handles for user comfort and safety
Unique patented design for access in different hard-to-reach areas
Product Specifications
Size: 7" L x 2.75" W x .5" H
|
|
|
Heavy-Duty 9" Linemen's Pliers (Channellock) Lot #368 (Sale Order 368 of 1039) Larger, stockier beveled nose
Aggressive cross hatched tooth pattern for maximum grip
Tempered spring loaded handles for easy use in tight areas; with Channellock Blue comfort grip pads
Perfectly mated cutter, hardened to hold its edge
Drop forged high carbon steel construction
Product Specifications
Style: Beveled nose
Length: 9.5"
|
|
|
Hose Clamp Pliers (Channellock) Lot #369 (Sale Order 369 of 1039) Heavy-duty design for industrial use
Precision made of fine polished, high carbon drop forged steel
Patented PermaLock® fastener eliminates nut and bolt failures
Channellock Blue® comfort grips are only for hand comfort and improved appearance and not recommended or warranted for dielectric properties
ISO certified
Product Specifications
Length: 8.25"
Net Weight: 10.51 oz.
Jaw Thickness: 15/32"
Width: 1-17/64
Jaw Lgth: 1-3/16
|
|
|
Little Champ Pliers (Channellock) Lot #370 (Sale Order 370 of 1039) Channellock presents its little but tough line of Little Champ pliers. Forged from the highest quality Solingen carbon steel, with European box joint style to provide the highest leverage and durability. Long lasting, with induction hardened cutting edges and leaf spring. Ergonomic handles provide safe and comfortable grip. Made in Germany.
Product Specifications
Type: Round nose
|
|
|
End Nippers (Crescent) Lot #371 (Sale Order 371 of 1039) Top quality end cutting tool
Precision manufactured from forged alloy tool steel
Handles with carefully designed leverage ratio to blades, easier cutting
Carefully designed throat clearance and rivet size
Electronically induction hardened, angled cutting edges and blade sizes
ISO certified
Product Specifications
Size: 8"
|
|
|
Linemen's Pliers (Channellock) Lot #372 (Sale Order 372 of 1039) Laser heat-treated cutting edges last three times longer than any pliers on the planet
Channellock knife and anvil style cutting edge ensures perfect mating and superior cutting edge life, resulting in a clean cut every time
High carbon C1080 steel for superior performance on the job
Electronic coating for ultimate rust prevention
ISO certified
Product Specifications
Size: 9" L
|
|
|
Linesman's Pliers (WT Import) Lot #373 (Sale Order 373 of 1039) Drop forged and highly polished. PVC covered grips. Wire cutting features.
Product Specifications
Size: 6"
|
|
|
Locking Pliers with Wire Cutter (IRWIN) Lot #374 (Sale Order 374 of 1039) Curved jaw puts tremendous pressure on four points of any style nut or bolt head; includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth are designed to grip from any angle
Product Specifications
OAL: 5"
Jaw Thickness: 1/4"
Jaw Adj: 1-1/4"
|
|
|
Miniature Locking Pliers (IRWIN) Lot #375 (Sale Order 375 of 1039) Curved jaw puts tremendous pressure on four points of any style nut or bolt head; includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth are designed to grip from any angle
Product Specifications
Jaw Thickness: 1/4"
Jaw Adj: 15/16"
OAL: 4-1/4"
|
|
|
Oil Filter Pliers Set (Channellock) Lot #376 (Sale Order 376 of 1039) Set consists of Channellock Models 212 (12-inch) and 215 (15-inch)
Right angle teeth help ensure a strong grip
High carbon steel construction
PermaLock® fastener eliminates nut and bolt failure
Remove oil filters from cars, trucks, motorcycles, ATVs, and lawn and garden equipment
Also works well for turning sink basket strainers and large pipe couplings
ISO certified
Product Specifications
Length: Model 212, 12"; Model 215, 15"
Jaw Adj: Model 212, 5; Model 215, 6
Capacity: Model 212, 2-3/4" - 4-1/4"; Model 215, 2-1/2" - 5-1/2"
|
|
|
Pincher Pliers (WT Import) Lot #377 (Sale Order 377 of 1039) Fully drop forged, with polished jaws. Thousands of uses. Great for ripping nails and heavy wire.
Product Specifications
Size: 10"
|
|
|
Needle Nose Solid Joint Pliers Lot #378 (Sale Order 378 of 1039) Designed for work in tight, narrow areas
Long needle nose with excellent gripping ability
Made of forged alloy tool steel and individually tested for strength
Polished head
Red non-slip cushion handle grips
Product Specifications
Length: 7-15/32"
Thickness: 21/64" max.
Size: 7"
|
|
|
Long Nose Pliers & Scissors (WT Import) Lot #379 (Sale Order 379 of 1039) Individual scissors or pliers available or buy the set. Long nose pliers have serrated jaws and PVC grips. Available in 6- or 7-inch lengths. Scissors are 4 inches long and have serrated tips. Good for cutting small gauge wire and terminal crimping.
Product Specifications
Pieces: Set of 3
Type: 2 pliers; 1 pair scissors
Size: 4", 6", 7"
|
|
|
Long Nose Pliers (WT Import) Lot #380 (Sale Order 380 of 1039) PVC covered handles. Serrated jaws with side cutting feature. Drop forged and highly polished.
Product Specifications
Size: 8"
|
|
|
Long Nose Pliers with Side Cutter (Channellock) Lot #381 (Sale Order 381 of 1039) Cross hatching on jaws. Perfectly mated cutter. Heat treated to hold its edge. ISO certified.
Product Specifications
Size: 8"
|
|
|
Oil Filter Pliers (Channellock) Lot #382 (Sale Order 382 of 1039) Right angle teeth help ensure a strong grip in all directions
High carbon steel construction
PermaLock fastener eliminates nut and bolt failure
Remove oil filters from cars, trucks, motorcycles, ATVs and lawn and garden equipment
Also works well for turning sink basket strainers and large pipe couplings
Product Specifications
Pieces: 1
Net Weight: 2.08 lbs.
Length: 15"
Jaw Capacity: 2.5" to 5.5"
Jaw Lgth: 3.5"
|
|
|
Side Cutting Lineman's Pliers (Crescent) Lot #383 (Sale Order 383 of 1039) Designed for electrical work
Electronically induction hardened, durable and keen side cutting edges
Made of forged alloy tool steel with polished head
Spring tempered handles with red non-slip cushion handle grips
Product Specifications
Cutting Length: 5/8"
Length: 7-1/4"
Size: 7"
Thickness: 1/2"
|
|
|
Slip Joint Pliers (Channellock) Lot #384 (Sale Order 384 of 1039) High carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention. Features include a heavy-duty wire cutting shear, Channellock Blue® comfort grips, and a PermaLock® fastener, which eliminates nut and bolt failure. ISO certified.
Product Specifications
Net Weight: .87"
Jaw Lgth: 1.56"
Length: 10"
Size: 10"
|
|
|
Snipe Nose Pliers (Channellock) Lot #385 (Sale Order 385 of 1039) Longer needle nose for finer, more precise work. Heat treated to hold its edge. Polished high carbon drop forged steel. Channellock Blue comfort grips. ISO certified.
Product Specifications
Size: 7" L
|
|
|
Slip Joint Pliers (Crescent) Lot #386 (Sale Order 386 of 1039) Drop forged steel, hardened and tempered. Bright plate finish and knurled handles. Milled gripping teeth and wire cutter feature. ISO certified.
Product Specifications
Size: 8"
|
|
|
1221-S Pliers Replacement Tip Kit Lot #387 (Sale Order 387 of 1039) For use with Hi-Tech Model 1221-S snap ring pliers.
|
|
|
2-Piece Snap Ring Pliers Set (WT Import) Lot #388 (Sale Order 388 of 1039) For both internal and external rings. Tips included are straight and 45 and 90 degrees. Coated handles.
Product Specifications
Pieces: 2
|
|
|
6" Snap Ring Pliers (WT Import) Lot #389 (Sale Order 389 of 1039) Hardened, tempered and chrome plated. Straight tip.
Product Specifications
Type: External
Length: 6"
|
|
|
6-Piece Retaining Ring Pliers Kit (Hi-Tech) Lot #390 (Sale Order 390 of 1039) The precision machined, chrome plated and burnished tips extend through handles of all pliers to provide positive tip control, alignment and stability. Conical shaped tips secure the retaining ring for stable installation and removal. Comfortable, durable wear-resistant handles and spring return. Quality German craftsmanship throughout.
This kit contains the following:
One .038 external straight tip for 1/8 to 1 inch
One .041 internal straight tip for 3/8 inch to 1-3/8 inches
One .070 internal straight tip for 1-1/16 to 2 inches
One .038 external 90-degree tip for 1/8 to 1 inch
One .041 internal 90-degree tip for 3/8 inch to 1-3/8 inches
One .070 external straight tip for 5/16 inch to 2 inches
|
|
|
Snap Ring Pliers (Hi-Tech 1221-S) Lot #391 (Sale Order 391 of 1039) Services miniature and small retaining rings
Adjustable stop to improve efficiency of internal ring installation and to prevent damage to external rings
Five pairs of alloy steel tips with hex wrench in a handy tip kit pouch
Spring return handles for greater tool control
Comfortable plastic cushion grips
Product Specifications
Range: Internal, 1/4"-1"; external, 1/8"-1"
|
|
|
Snap Ring Pliers (Hi-Tech 1234 Series) Lot #392 (Sale Order 392 of 1039) Color coded interchangeable tips
Patented push button internal and external design
Spring return handles
Heavy-duty cushion grips
The 1234-S model provides the same range as the 1234 and adds an adjustable stop for limiting jaw opening in both internal and external use
Product Specifications
Range: Internal, 3/8"-2"; external, 1/4"-2"
Type: Adjustable stop
|
|
|
Snap Ring Pliers (Hi-Tech Model 65) Lot #393 (Sale Order 393 of 1039) Provides safe and stable service of large retaining rings. With its patented automatic ratchet lock and 12-point broached jaws, Model 65 offers unmatched support for the most secure and stable ring installation and removal.
These pliers have Hi-Tech's patented push button feature, which allows for easy convertibility to and from internal and external use. The spring return handles allow for greater tool control and ease of use.
Each pliers set contains six pairs of alloy steel color coded tips and a hex wrench in a handy tip kit pouch. These patented pliers replace eight or more of any single competitor's limited-use pliers.
Product Specifications
Range: Internal, 1-13/16” - 4”; external, 1-1/2” - 4”
|
|
|
Snap Ring Pliers Kit (Hi-Tech) Lot #394 (Sale Order 394 of 1039) Patented retaining ring pliers and tips in a custom molded case. Sixteen pairs of alloy steel tips, color coded and stored in plastic pouches, located by their respective pliers.
Product Specifications
Pieces: 3
Range: Internal, 1/4"-4"; external, 1/8"-4"
|
|
|
Deluxe Knife & Pick (WT Import) Lot #395 (Sale Order 395 of 1039) Stainless steel.
Product Specifications
OAL: 6-3/4"
|
|
|
Knife & Pick (WT Import) Lot #396 (Sale Order 396 of 1039) Stainless steel.
Product Specifications
OAL: 6-3/4"
|
|
|
Probe & Hook Set (General) Lot #397 (Sale Order 397 of 1039) For probing, cleaning, picking or marking small work surfaces. Eight-sided cushion grip handle insures a firm grip. Set consists of the most popular mini-tool styles: one straight probe; one each 35- and 90-degree bent blades; and one 180-degree hook probe. ISO certified.
Product Specifications
Blade Length: 2-5/8"
|
|
|
Stainless Steel Dental Probes (WT Import) Lot #398 (Sale Order 398 of 1039) Medical quality, double ended. Excellent tools for precision miniature work, circuitry, probing and other uses. Tips are manufactured of spring wire, tempered for flexibility and strength. Non-rusting.
Product Specifications
Type: No. 5 (pictured)
|
|
|
14" Cats Paw Nail Puller (Mayhew) Lot #399 (Sale Order 399 of 1039) Removes nails from the hardest, most stubborn wood. Prevents damage to woods while taking out nails. Forged from the highest quality alloy steels. Full shank heat-treated for maximum strength and durability.
Product Specifications
Length: 14"
|
|
|
18" Cats Paw Pry Bar & Nail Puller (Mayhew) Lot #400 (Sale Order 400 of 1039) Finest tempered tool steel for strength and durability and given a corrosion resistant finish. Used in construction and demolition where strength is needed for the toughest woods, yet also the need to prevent damage.
Product Specifications
Length: 18"
|
|
|
Cats Paw Utility Bar (Mayhew) Lot #401 (Sale Order 401 of 1039) Made of the finest tool steel for extra durability, with black oxide finish for high corrosion resistance. Cats Paw is the name for hand tools that stand up to any tough work situation.
Product Specifications
Type: 14" double
|
|
|
Death Stick "Exhumer" Nail Puller Lot #402 (Sale Order 402 of 1039) Buried the nail in the wrong board? No worries; just dig it up with the Death Stick Exhumer™ from Dead On, division of the company that makes the famous Maasdam Pow'R Pull.
Lose your circular saw wrench? No problem -- the Exhumer's got one built right in. The Exhumer also comes with a handy bottle opener. Precision cast for optimal results.
|
|
|
11-Inch Push Stick Lot #403 (Sale Order 403 of 1039) This stick is used for pushing material on router tables, table saws, shapers and other machinery and woodworking tools. Tool keeps hands away from sharp blades. Ergonomic design. Made of high impact molded plastic.
|
|
|
Slanted Push Block Lot #404 (Sale Order 404 of 1039) Natural rubber friction pad grips the workpiece. Tool keeps hands away from sharp blades. Ergonomic design. Made of high impact molded plastic.
|
|
|
V-Shaped Push Stick Lot #405 (Sale Order 405 of 1039) V-shaped design is used for pushing material on router tables, table saws, shapers and other machinery and woodworking tools. Tool keeps hands away from sharp blades. Made of high impact molded plastic.
|
|
|
12" Steel Strap Cutter (H.K. Porter) Lot #406 (Sale Order 406 of 1039) Cuts steel strap up to 1-1/4 inches. Sheer cut blades with one-hand operation. Work head has black oxide, rust-resistant finish. Cushion grip handles. ISO certified.
Product Specifications
Capacity: 1-1/4" W x .050" thick
Length: 12"
|
|
|
24" Heavy-Duty Steel Strap Cutters (H.K. Porter) Lot #407 (Sale Order 407 of 1039) Cuts steel strap up to 2 inches. Sheer-cut blades. Long handled gooseneck, two-handle operated cutter.
|
|
|
3-Piece 10" Aviation Tin Snip Set (WT Import) Lot #408 (Sale Order 408 of 1039) One each designed for cutting left, right and straight patterns. Compound leverage for top cutting power. Tough vinyl grip handles.
Product Specifications
Capacity: 18-gauge max.
Length: 10"
|
|
|
5" DuraSharp Pointed-Tip Scissors (Fiskars) Lot #409 (Sale Order 409 of 1039) Ideal for cutting tasks in tight spaces. For left- or right-hand use.
|
|
|
5" Shortcut Scissors (Fiskars) Lot #410 (Sale Order 410 of 1039) For snipping and trimming. Can be resharpened.
|
|
|
7-1/2" All-Purpose Snips (Fiskars) Lot #411 (Sale Order 411 of 1039) Workhorse snips have long serrated blades that reduce slippage, and spring action minimizes hand fatigue. Performs well on both light and heavy materials.
|
|
|
7-1/2" Safety Snips (Fiskars) Lot #412 (Sale Order 412 of 1039) Large cutting length and big handles for large hands, or use with gloves.
|
|
|
8" General Purpose Scissors (Fiskars) Lot #413 (Sale Order 413 of 1039) Multi-purpose cutting. With stainless steel blade and adjustable pivot screw.
|
|
|
8" Left Handed Shears (Fiskars) Lot #414 (Sale Order 414 of 1039) Comfortable handles are contoured for left-handers on these multi-purpose shears. Stainless steel rivet is permanently and precisely fitted for top cutting efficiency.
|
|
|
8" Right Handed Shears (Fiskars) Lot #415 (Sale Order 415 of 1039) Fiskars' absolutely most popular multi-purpose shears. Great for practically anything, from paper to poultry.
|
|
|
9" Metal-Wizz Multi-Purpose Metal Snips (Wiss) Lot #416 (Sale Order 416 of 1039) Cuts curves, straight or any combination
Designed for the home craftsman
Cuts screening, hardware cloth, carpeting, synthetic shingles, downspouts and tile gutters
Non-slip serrated jaw of molybdenum steel for compound lever action
Spring-action for fast, effortless feed
Handle of high tensile strength alloy steel exceeds hand power limit
Non-slip, textured grips and safety latch for superior control
Product Specifications
Capacity: 20-gauge low carbon cold rolled steel
|
|
|
9" Razor Edged Shears (Fiskars) Lot #417 (Sale Order 417 of 1039) Efficient and easy to use when cutting heavy materials or multiple layers. Blades are set at a steeper angle. Heavier rivet joints provide solid leverage. Preferred by people with larger hands
|
|
|
9-1/2" Bent Shears (Fiskars) Lot #418 (Sale Order 418 of 1039) Effective on heavier materials. Oversized handle improves comfort and operation.
|
|
|
9-1/2" Serrated Shears (Fiskars) Lot #419 (Sale Order 419 of 1039) Serrated shear edge "grips" as it cuts, for better control of slick materials. Small diameter stock fits into blade notch for quick, sure trimming
|
|
|
All-Purpose Cutter (Wiss) Lot #420 (Sale Order 420 of 1039) 3-inch serrated blades provide longer cut than most tools
Blades grab hold of and aggressively cut through material
Compound action provides up to 5-to-1 ratio for easy cutting
Chrome plated blades resist rust and corrosion
Spring loaded for faster opening
Non-slip textured cushion grips
Small closed position handle design for smaller hands
Cuts low carbon cold rolled steel
Product Specifications
Length: 10-1/2"
Blade Length: 3"
|
|
|
Lightweight Aluminum Snips (Wiss) Lot #421 (Sale Order 421 of 1039) Cuts straight and curves (light gauge)
For light-gauge metal, flash, vinyl siding, gutter, net and rubber
3-1/2-inch blades, drop forged for long life
Rust-resistant blades
Extended blade tip gets into tighter corners and for snipping
Replacement blades available (order no. 6905-0095)
Product Specifications
Capacity: 23-gauge
Cut: 3-1/2"
OAL: 12"
|
|
|
Aviation Snips -- Offset Lot #422 (Sale Order 422 of 1039) Offset models keep user's hand above material being cut and flow material away from blades for ease of cut. Capacity for cutting 18-gauge cold-rolled sheet metal and 22-gauge stainless steel sheet metal.
Product Specifications
Type: Straight cut
Cut: 1-1/2"
Capacity: 18-ga. cold rold sheet metal; 22-ga. stainless
|
|
|
Aviation Snips -- Regular Lot #423 (Sale Order 423 of 1039) Regular models in three blade patterns, with both top and bottom serrated blades.
Product Specifications
Cut: 1-1/2"
Type: Straight cut
Capacity: 18-ga. cold rolled sheet metal; 22-ga. stainless
|
|
|
Aviation Snips -- Upright Lot #424 (Sale Order 424 of 1039) Right angle blades on Midwest Snips' Upright® models make cutting easier in tight spaces and overhead.
Product Specifications
Capacity: 18-ga. cold rold sheet metal; 22-ga. stainless
Cut: 1-1/4"
Type: Right cut
|
|
|
Duckbill Combination Pattern Snips (Wiss) Lot #425 (Sale Order 425 of 1039) Duckbill combination pattern snips feature the advantage of cutting straight or moderately tight curves, left or right, in light stock. Rust resistant, hot drop forged and individually hand edged blades. Cushioned comfort grip makes these snips popular among home craftspeople and professional artisans.
Product Specifications
Capacity: 23-gauge steel
Cut: 3-3/4"
Length: 13"
|
|
|
100-Piece Bit Set (WT Import) Lot #426 (Sale Order 426 of 1039) This set contains the following:
1/4-inch shank bits
Three torque sets
Four each Tri-Wings and spanners
Eight Phillips
13 metric hex
16 TORX
Three each clutches and splines
Four square recess
Nine slotted
Nine Pozidriv
14 fractional hex
Two each tamper proof fractional hex, metric hex, and TORX hex
Wing nut driver
One each magnetic bit and socket bit holders
Extensions, one 1/4-inch square by 1/4-inch hex by 1 inch, and 1/4-inch square by 1/4-inch hex by 2 inches
Plastic storage case
|
|
|
33-Piece Security Bit Set (WT Import) Lot #427 (Sale Order 427 of 1039) Sandblasted S2 tool steel and precision milled. Bits fit all power drills, screwdrivers, cordless screwdrivers and magnetic drivers. Sizes fit the most commonly found tamper-proof security fasteners. Includes PVC organizer.
Set contains one 2-1/2 inch magnetic extension bit holder and the following 1-inch security bits:
Sizes 6, 8 and 10 millimeters (torque)
4, 6, 8 and 10 millimeters (spanner)
Nos. #1, #2, #3 and #4 (Tri-Wing)
2, 2.5, 3, 4, 5 and 6 millimeters (hex)
5/32, 9/64, 1/8, 7/64, 3/32 and 5/64 inch (SAE hex)
8, 10, 15, 20, 25, 27, 30, 35 and 40 (star drive)
|
|
|
6-Piece Bit Driver & Holder Kit (WT Import) Lot #428 (Sale Order 428 of 1039) Set contains two standard slotted bits; four Phillips bits, one insert bit holder and handy plastic dispenser.
|
|
|
Quick Change Driver Set (WT Import) Lot #429 (Sale Order 429 of 1039) Set contains quick change magnetic holder; Phillips #1 and #2 bit; 3/16-inch slot bit; and three-piece pilot drill countersink.
|
|
|
30-Piece Magnetic Screwdriver Bit Set (WT Import) Lot #430 (Sale Order 430 of 1039) Contains all of the most commonly used shapes and sizes. Assemble the 1/4-inch socket adapter with the bit holder and a bit to drive screws or nuts with your power drill. You can also attach the adapter and your own sockets to the 7-inch driver for use as a hand nut driver.
All bits made of high quality chrome vanadium steel for long life. The screwdriver handle is made of nearly indestructible acetate. Easy to carry storage case holds tools in place when not in use.
|
|
|
5-in-1 Multi-Bit Precision Screwdriver (General) Lot #431 (Sale Order 431 of 1039) High quality jeweler's style precision screwdrivers for mechanics, technicians, jewelers and do-it-yourselfers
Five heat-treated blades conveniently store in handle
Easy-twist screw chuck holds blade securely in place
Patented ergonomically designed handle with fingertip swivel head for greater control; handle also provides more rapid rotation and greater comfort
ISO certified
Product Specifications
Size: Slotted, 1/16", 5/64", 3/32"; Phillips, #00; TORX, T6
|
|
|
5-in-1 Screwdriver (Lutz) Lot #432 (Sale Order 432 of 1039) Comes with one each of 1/4- and 3/16-inch slotted bits; Phillips #1 and #2 bits; and 5/16-inch nut driver. ISO certified.
|
|
|
Reversible Hand Impact Tool (WT Import) Lot #433 (Sale Order 433 of 1039) This tool tightens and loosens those tough, frozen screws, bolts or nuts. It's spring loaded, delivering tremendous torque at the driving point. The tool is chrome plated and drop forged and has a knurled handle with 3/8-inch drive for use with sockets. Includes steel box and instructions. Has adapter for use with 5/16- and 3/8-inch bits.
Product Specifications
Size: Phillips #1, #2
OAL: 5-1/2"
Body Dia: 1-1/4"
|
|
|
15-Piece Glue Gun Kit (WT Import) Lot #434 (Sale Order 434 of 1039) Contains one each regular and mini trigger feed glue guns; and 12 glue sticks, six each of two sizes -- 1/2 by 6 inches and 5/16 by 4 inches. Carrying case included.
|
|
|
20-Gauge Electric Crown Stapler (WT Import) Lot #435 (Sale Order 435 of 1039) Heavy-duty 20-gauge crown electric stapler is perfect for cabinetry, carpeting and upholstery work. Hit frequency is 20 staples per minute.
Product Specifications
Volts: 120
Amp Rating: 15
Cord Length: 12 ft.
Capacity: 85 staples in 1/4", 5/16", 3/8", 1/2", 9/16"
|
|
|
Heavy-Duty Electric Electro-Matic Staple & Nail Gun Lot #436 (Sale Order 436 of 1039) Professional grade
Operates on any 110-volt AC connection
Drives BN1810 5/8-inch nails
Heavy-duty solid state electronic circuitry
On/off safety trigger lock, trigger squeeze speed and easy operation
One-piece solid steel base construction
Tough impact-resistant housing
Patented jam-proof mechanism
Lightweight and well-balanced
Hand contoured handle
Heavy-duty cord
Loads 85 Arrow T50 staples only of .050 wire
Shoots these sizes of T50 staples: 1/4, 5/16, 3/8, 1/2 and 5/8 inch
Two-year limited home use warranty
Product Specifications
Power: 110V AC
Warranty: 2 year limited
Cord Length: 10 ft.
|
|
|
Heavy-Duty Standard Stapler (Arrow) Lot #437 (Sale Order 437 of 1039) Widely used by professional contractors
All steel construction with chrome finish
Patented jam-proof mechanism with hardened steel working parts
Loads one full strip 85 T-50 staples of .050 wire in sizes 1/4, 5/16, 3/8 and 1/2 inch
Two-year limited in home warranty
|
|
|
Hot Melt Glue Gun (WT Import) Lot #438 (Sale Order 438 of 1039) Hot melt adhesive gun permanently bonds wood, leather, paper, cloth, etc. Non-toxic and neat. Includes six glue sticks.
Product Specifications
Power: 120 V, 60 watts
|
|
|
Lever-Feed Glue Gun Lot #439 (Sale Order 439 of 1039) The unique lever feed action of this professional grade glue gun makes it perfect for anyone that appreciates the way a glue gun should work. The more glue applications you do, the more you will appreciate the comfort you get from using a lever feed, as opposed to a trigger feed.
Precise control and unique high-volume drip-less melt housing make it capable from small tasks to large projects. Features include a non-drip nozzle, check valve to control glue flow and built-in drip tray and stand.
|
|
|
The Tomahawk Heavy-Duty Hammer Tacker (Arrow) Lot #440 (Sale Order 440 of 1039) Feeds and drives staples automatically
Lightweight, balanced design
All-steel construction
High carbon hardened steel working parts
Patented jam-proof mechanisms
Precision locked rear loading
Retractable striking edge
Specially designed power grip handle
Durable chrome finish
Loads two full strips (170) Arrow T-50 staples only, of .050 wire in four sizes: 1/4, 5/16, 3/8 and 1/2 inch
|
|
|
Mechanic's 108-Piece Tool Set (Crescent) Lot #441 (Sale Order 441 of 1039) Tools covered by Crescent's lifetime limited warranty and exceed ANSI load specifications. Set packaged in plastic case with dimensions of 12-1/2 inches long by 17-1/2 inches wide.
Set contains the following tools:
3/8-inch ratchet driver
10 SAE sockets, sizes 1/4 to 7/8 inch
10 metric sockets, sizes 6 to 20 mm
One each 5/8-inch and 13/16-inch spark plug sockets
3/8-inch drive extension
One each 1/4-inch and 3/8-inch male socket adapters
Six SAE combination wrenches
Six metric combination wrenches
One each 8-inch long nose and 6-inch diagonal pliers
Magnetic bit driver
Naro ratchet driver
40 assorted screwdriver bits
One each SAE and metric 10-piece hex key sets with holders
|
|
|
Door Closer (Import) Lot #442 (Sale Order 442 of 1039) Easy surface mounted installation. Adjustable closing and latching speeds. Works on both left and right opening doors.
|
|
|
Flat Hand Wheels (WT Import) Lot #443 (Sale Order 443 of 1039) Three spoke style flat wheel with revolving plastic handle. Pilot hole can be drilled larger to your specifications.
Product Specifications
Diameter: 6"
|
|
|
Gate Hasp (American Lock) Lot #444 (Sale Order 444 of 1039) The A810 hasp protects from cutting attacks to provide maximum security for double-drive industrial gates with 1-5/8 or 2-inch frames.
Simple four-bolt installation; all mounting hardware is included.
Adjustable slide fits gate opening from 3 to 6 inches wide
Accepts padlocks with 7/16-inch diameter shackle and 1-inch vertical shackle clearance
|
|
|
NightWatch High Security Deadbolt Locks (Master Lock) Lot #445 (Sale Order 445 of 1039) The NightWatch is the only deadbolt that locks out intruders -- even if they have the key.
Two-thirds of U.S. homeowners have unknowingly exposed themselves to the risk of an intruder entering their home with a copy of their key. Every time homeowners lend their keys to others, use valet parking or have a family member lose a key, there is a chance the key could be duplicated and used by others without their knowledge.
Master Lock specifically created the NightWatch to prevent intruders from entering, even if they have a copy of a homeowner's key. The lock installs and functions like a standard deadbolt, but once the exclusive NightWatch feature is activated, no key can unlock the deadbolt.
Other features:
Installs like a standard deadbolt with just a Phillips screwdriver
Can be engaged or disengaged only from inside the house
Fits all doors and replaces all brands
Limited lifetime finish and mechanical guarantee
Safety release prevents accidental activation
Simple to use; provides extra nighttime security
Exceeds ANSI Grade 2 specifications
BumpStop advanced cylinder technology resists "bump" attacks -- a newer form of lock picking that is rapidly gaining popularity among invaders
NightWatch set consists of one keyed knob and one single cylinder deadbolt. The same key opens both the knob and the deadbolt.
Product Specifications
Type: Polished brass finish
|
|
|
144-Piece Cotter Pin Set & Spreader Lot #446 (Sale Order 446 of 1039) Assorted pins up to 1-1/2 inches. Includes spreader and remover. Lmited supply
|
|
|
150-Piece Hitch Pin Clip Assortment (WT Import) Lot #447 (Sale Order 447 of 1039) Set contains the following:
Eight 5/32 by 2-5/16 inches
Twenty 9/64 by 1-3/4 inches
Twenty-five 3/64 by 1-5/8 inches
Twenty-five 5/64 by 1-9/16 inches
Thirty 5/64 by 1-5/16 inches
Forty-two 3/32 by 1-3/16 inches
|
|
|
150-Piece Nylon Nut Assortment (WT Import) Lot #448 (Sale Order 448 of 1039) Kit contains the following sizes:
25 #10 by 24
35 1/4 inch by 20
25 1/4 inch by 28
30 5/16 inch by 18
25 3/8 inch by 16
10 1/2 inch by 13
|
|
|
170-Piece U-Clip & Screw Assortment (WT Import) Lot #449 (Sale Order 449 of 1039) Set packaged in plastic storage case and contains the following:
40 screws, #6 by 5/16 inch
20 screws, #8 by 5/8 inch
15 screws, #10 by 1/2 inch
10 screws, 1/4 by 3/4 inch
U-clips -- 40 pieces #10; 20 pieces #8; and 10 pieces 1/4 inch
Product Specifications
Quantity: 170 pcs.
|
|
|
200-Piece Self Drilling Screw Assortment (WT Import) Lot #450 (Sale Order 450 of 1039) Each screw has a hex washer head.
Product Specifications
Size: 30 each #8 x 1/2", 5/8", 3/4", 1"; 20 each #10 x 1/2", 5/8", 3/4", 1"
|
|
|
225-Piece O-Ring Assortment (WT Import) Lot #451 (Sale Order 451 of 1039) Contains the most popular O-ring sizes.
|
|
|
285-Piece Retaining Ring Assortment (WT Import) Lot #452 (Sale Order 452 of 1039) Eighteen sizes, from 1/4 to 1-1/4 inches.
|
|
|
3/8 to 1-1/4" Bushing Removing & Inserting Set (WT Import) Lot #453 (Sale Order 453 of 1039) Each bushing adapter has two diameters. The small diameter enables you to get the bushing started. By changing adapters, you can drive the bushing all the way through. Set consists of small medium and large drivers with three nuts; 16 bushings with 19 different sizes; and plastic fitted box.
Bushing sizes are as follows:
3/8" x 7/16"
7/16" x 1/2"
1/2" x 9/16"
9/16" x 5/8"
39/64" x 43/64"
5/8" x 11/16"
5/8" x 3/4"
11/16" x 13/16"
47/64" x 55/64"
3/4" x 7/8"
13/16" x 15/16"
55/64" x 63/64"
7/8" x 1"
15/16" x 1-1/16"
1" x 1-1/8"
1-1/16" x 1-3/16"
1-1/8" x 1-1/4"
1-3/16" x 1-5/16"
1-1/4" x 1-3/8"
|
|
|
300-Piece E-Clip Set (WT Import) Lot #454 (Sale Order 454 of 1039) Contains nine different sizes, 1/16 to 7/8 inch.
|
|
|
300-Piece Snap Ring Kit (WT Import) Lot #455 (Sale Order 455 of 1039) Contains 12 sizes, 1/4 through 1-1/4 inches. Kit will take care of 95 percent of replacement sizes in the automotive and industrial market.
|
|
|
315-Piece Roll Pin Kit (WT Import) Lot #456 (Sale Order 456 of 1039) Contains 12 sizes, from 5/64 to 3/8 inch; diameter from 5/8 to 2 inches long.
|
|
|
407-Piece O-Ring Set (WT Import) Lot #457 (Sale Order 457 of 1039) Contains the most popular O-ring sizes.
|
|
|
555 Pc. Cotter Pin Maintenance Kit Lot #458 (Sale Order 458 of 1039) Six sizes: 1/16 x 1", 3/32 x 1", 3/32 x 1-1/2, 1/8 x 1/4, 1/8 x 2", 5/32 x 2-1/2.
|
|
|
Insulated Terminal Assortments (WT Import) Lot #459 (Sale Order 459 of 1039) Solderless, for every electrical connection.
Product Specifications
Size: 500 pieces
|
|
|
146-Piece Washer Assortment (WT Import) Lot #460 (Sale Order 460 of 1039) Consists of 73 each of flat and spring types.
Product Specifications
Size: 3/16", 1/4", 5/16", 3/8"
|
|
|
40-Piece Molly Bolt Assortment (WT Import) Lot #461 (Sale Order 461 of 1039) Packaged in plastic case with six of the most popular sizes: 10 pieces each 1/8 inch long and short; six pieces each 3/16 inch long and short; and four pieces each 1/4 inch long and short.
Product Specifications
Quantity: 40 pcs.
|
|
|
60-Piece Screw & Anchor Kit (WT Import) Lot #462 (Sale Order 462 of 1039) The most popular plaster anchors with their corresponding screws.
|
|
|
95-Piece Wood Screw Assortment (WT Import) Lot #463 (Sale Order 463 of 1039) Selection of popular sizes.
Product Specifications
Size: #4 x 1/2", #5 x 5/8", #6 x 3/4", #7 x 1", #10 x 1-1/2"
|
|
|
120-Piece Wire Hose Clamp Assortment (WT Import) Lot #464 (Sale Order 464 of 1039)
A versatile selection of the most popular clamp sizes.
Product Specifications
Size: (30) 1-1/4"; (26) 5/16"; (22) 3/8"; (18) 7/16"; (14) 1/2"; (10) 3/16"
|
|
|
200-Piece Spring Assortment (WT Import) Lot #465 (Sale Order 465 of 1039) Twenty different sizes of springs, cadmium plated and rustproofed to 3-1/8 inch length.
|
|
|
Arbor Presses with Ratchet Lever (WT Import) Lot #466 (Sale Order 466 of 1039) These arbor presses operate with a ratchet device that permits you to use the lever in the most convenient position. The lever has a counterweight for quick return, after which the downstroke handwheel will advance the ram to the work quickly.
Product Specifications
Capacity: 5 tons, 18-1/4" over table
Base: 11" x 25"
Height: 37"
Net Weight: 440 lbs.
Plate Size: 10-1/4"
Ram Dia: 2" x 2" x 25-1/2"
Throat: 8-1/2"
|
|
|
Heavy-Duty Arbor Presses (WT Import) Lot #467 (Sale Order 467 of 1039) Four-position anvil
Quality heavy-type iron casting
Tough stubbed gear teeth
Chrome plated, adjustable, round steel handle provides convenient handle positioning
Steel rams
Body enameled finish
Product Specifications
Height: 22" overall
Ram Dia: 1-5/8" dia. x 15-3/4" L
Capacity: 3 tons
Clearance: 5-1/2" behind rod
Ram Travel: 1 rev.
Base: 17-3/4" L x 12-1/2" W x 3-1/2" H
|
|
|
Ratchet Lever Arbor Press (Dake) Lot #468 (Sale Order 468 of 1039) Model 1-1/2B press operates with a ratchet device that permits using the lever in the most convenient position, and it has a counterweight for quick return of the lever after downstroke. Hand wheel advances ram to work quickly.
Product Specifications
Overall Height: 28"
Leverage Ratio: 48:1
Maximum Work Diameter: 14"
Capacity: 3 tons
Capacity over Table: 18-1/4"
Capacity over Tableplate: 17-1/2"
Base: 1/4" x 21"
Ram Dia: 1-1/4" x 1-1/4" x 24-1/2"
Net Weight: 196 lbs.
Largest Arbor: 2"
Throat: 7"
|
|
|
Single Lever Arbor Presses (Dake) Lot #469 (Sale Order 469 of 1039) These presses feature a shimmed ram cap, adjustable handle and smooth action gears. A shimmed ram cap permits take-up for potential wear, and an adjustable handle allows convenient positioning. Smooth action gears offer finite ram control. Pedestals available for models 0 and 1. Table plate on models 00, 0 and 1.
Product Specifications
Throat: 7"
Capacity: 3 tons
Max Ram of Tableplate: 10-3/4"
Max Ram of Table: 11-1/2"
Base: 7-1/4" x 18"
Largest Arbor: 2"
Max Dia: 14"
Ram Dia: 1-1/4" x 1-1/4" x 16-1/2"
Overall Height: 19"
Leverage Ratio: 36:1
Net Weight: 130 lbs.
|
|
|
1" OD Bending Machine (WT Import) Lot #470 (Sale Order 470 of 1039) Steel tubing frame is 1.3 inches in diameter . Steel plate base is 5/16 and 1/4 inch. Steel tubing handle of 1.1 inch diameter. Machined steel roller, cast aluminum brace.
Product Specifications
Capacity: 5/8", 3/4" 1" dia. electrical conduit
Net Weight: 55 lbs.
Vise: 1-1/4" max. opening
Dimensions: 44" H x 20" W x 9" D
Die: Uses 5/8", 3/4", 1" pipe dies; 0.755" die arbor
|
|
|
18" Mini Metal Bender (WT Import) Lot #471 (Sale Order 471 of 1039) For various fabrication projects, such as boxes, covers or trays. Pictured C-clamps are not included.
Product Specifications
Angle: 90° max.
Brake: 18" x 1-1/2"
Capacity: 16 ga. sheet metal
|
|
|
3" Capacity Hydraulic Bender (WT Import) Lot #472 (Sale Order 472 of 1039) Steel frame and pipe supports and hydraulic unit
Positive lock pipe support pins and one-piece frame for easy pipe insertion and removal from front
Makes 90-degree bends in rigid steel and aluminum
Includes cast iron shoes for 1/2-, 3/4-, 1-, 1-1/4, 1-1/2, 2-, 2-1/2 and 3-inch pipe sizes
Product Specifications
Capacity: Max. 3" rigid steel & aluminum
Pressure: 10 tons
Net Weight: 240 lbs.
|
|
|
30" Boss Bender (WT Import) Lot #473 (Sale Order 473 of 1039) Perfect for duct work, metal boxes, etc. C-clamps pictured are not included.
Product Specifications
Capacity: 16 ga. aluminum; 18 ga. steel
Angle: To over 90°
Brake: 30" x 2-7/16"
|
|
|
4" Bending Brake (WT Import) Lot #474 (Sale Order 474 of 1039) Steel construction. Used tor form boxes, trays, covers, etc.
Product Specifications
Dimensions: 17-3/8" x 10-1/8" x 5-1/2"
Radius: 1/4" min.
Capacity: 3/4" W x 11/16" th.; 2" W x 7/16" th.
|
|
|
Bench Model Compact Bender Lot #475 (Sale Order 475 of 1039) Includes these round dies: 1, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/2, and 3 inches. Right angle attachment. Handles telescope to 44 inches.
Product Specifications
Capacity: Mild steel, 5/16" x 1-1/4" or 1/4" x 2"; right angle, 3/16" x 1-1/4" or 1/4" x 1-1/4"; center pin, 1/4" th. (use 1" die or greater); solid rod, 1/2" (use 3" die)
Net Weight: 50 lbs.
|
|
|
Cable Tray Bender & Vise (WT Import) Lot #476 (Sale Order 476 of 1039) Makes bends in cable tray. Can be used as a portable vise. Construction: 1.263-inch diameter steel tubing frame, 0.312-inch steel plate, 1.116-inch diameter steel tubing handle, 0.707-inch diameter steel tubing support and cast aluminum vise. Pre-assembled. Includes a tool tray.
Product Specifications
Capacity: 2" min. dia., 12" max. L, 13-3/4" x 1/8" max. metal plate
Dimensions: 40" H x 20" W x 35-1/2" D
Net Weight: 54 lbs.
|
|
|
Coil Bender (WT Import) Lot #477 (Sale Order 477 of 1039) Black oxide finish.
Product Specifications
Handle: 11-1/2"
Base: 2-1/2" x 1-1/2"
Net Weight: 2 lbs.
|
|
|
E-Z Bend Hydraulic Bender (METALpro) Lot #478 (Sale Order 478 of 1039) Versatile bending machine with 12 tons of hydraulic power for a wide range of bending applications in pipe, conduit, tubing and round bar stock.
Works in any shop -- bender plugs into a standard 110-volt outlet. Using different size dies, the machine can bend ANSI seamless wrought steel, 1/4- to 2-inch, Schedule 40 pipe. With 1/2-gallon oil tank. Dies not included; sold separately.
Product Specifications
Dimensions: 26" W x 43"H x 27" L
Net Weight: 250 lbs.
Strokes: 4-5 per min.
Warranty: 1 year
Capacity: 12 tons; up to 2" pipe bending capacity
Motor: 110V, 1 ph., 3/4 hp
|
|
|
Floor Model Compact Bender Lot #479 (Sale Order 479 of 1039) Includes round dies in sizes 1, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/2 and 3 inches. Right angle attachment. Handles telescope to 44 inches.
Product Specifications
Net Weight: 61 lbs.
Capacity: Mild steel, 5/16" x 1-1/4" or 1/4" x 2"; right angle, 3/16" x 1-1/4" or 1/4" x 1-1/4"; center pin, 1/4" th. (use 1" die or greater); solid rod, 1/2" (use 3" die)
|
|
|
Hydraulic Bender (WT Import) Lot #480 (Sale Order 480 of 1039) Bends pipe and tube up to 180 degrees. Bending bars are adjustable to accommodate distances of 8-1/2, 11-1/4, 12, 19-1/2 and 22-1/4 inches.
Note:Bender not recommended for thin-walled tubing; it has a tendency to crimp.
Product Specifications
Capacity: 1/2"-2" pipe & tube
Includes: 12 ton jack
Dimensions: 4" D x 21" H x 24" W
Net Weight: 120 lbs.
|
|
|
Metal Bender (WT Import) Lot #481 (Sale Order 481 of 1039) Will bend 360 degrees; bending strength is 28-1/2 tons per square inch.
Maximum capacities:
Steel or iron: 5/8 inch round stock; 1/2 by 1/2 inch square stock; and 1-3/16 by 5/16 inch strip stock
Wrought iron: 15/32 inch round stock; 13/32 by 13/32 square stock; and 1-3/16 by 1/4 inch strip stock
Brass and copper: 5/8 inch round stock, 15/32 by 15/32 inch square stock; and 1-3/16 by 5/16 inch strip stock
Aluminum: 23/32 inch round stock; 19/32 by 19/32 inch square stock; and 1-3/16 by 13/32 inch strip stock
|
|
|
Universal Bender Lot #482 (Sale Order 482 of 1039) Forms wire, flat metal and tubing into clamps, handle, brackets, hooks, coils and more! Makes sharp angle bends in wire and rod up to 5/16 diameter and in flat metal to 1" x 1/8. Steel construction, weighs 6 lbs. Fits into a tool box and mounts on a bench or vise. Includes circle pins for 3/16, 1/4, 1/2 diameter circles, 1" diameter circle die, form pin follower, sharp angle die, gage and handle.
|
|
|
Wire Bender (WT Import) Lot #483 (Sale Order 483 of 1039) Black oxide finish.
Product Specifications
Base: 2-1/2" x 1-1/2"
Net Weight: 2 lbs.
Handle: 11-1/2"
|
|
|
Hydraulic Manual Pipe Benders (JET) Lot #484 (Sale Order 484 of 1039) Simple manual operation for ease of use
Six bending dies included
Rotating stand locks into three positions for stability and versatility
Heavy-duty hydraulic cylinder capable of bending Schedule 40 pipe
Completely manual; no external power needed
Two-year warranty
ISO certified
Product Specifications
Ram Dia: 2-1/3"
Piston Stroke: 12-5/8"
Load Limit: 20 tons
Capacity: 1/2"-3" pipe size; 6/25" max. pipe wall thickness
Dimensions: 19" H x 17" W x 40" L
|
|
|
1 HP Cold Saws (KMT) Lot #485 (Sale Order 485 of 1039) Simple operation and maintenance
Saw blades can be resharpened and re-toothed
Machines leave a high quality burr-free finish.
24-volt controls, mitering capacity, high speed steel blade, stock stop and built-in coolant are standard
Product Specifications
Blade Dia: 10" max.
Round Capacity @ 90°: 3"
Motor: 1 hp, 3 ph., 220V
Square Capacity @ 45°: 2-1/4"
Net Weight: 175 lbs.
Vise Size: 4" max. opening
Rectangular Capacity @ 45°: 2-1/4" x 2"
Round Capacity @ 45°: 2-3/4"
Square Capacity @ 90°: 2-3/4"
Spindle Speed(s): 52/104 RPM
Rectangular Capacity @ 90°: 3-1/2" x 1-1/4"
|
|
|
12" 3 HP Cold Saws (KMT) Lot #486 (Sale Order 486 of 1039) Simple operation and maintenance
Saw blades can be resharpened and re-toothed
High quality, burr-free finish
Standard are 24-volt controls, mitering capacity, high speed steel blade, stock stop, built-in coolant and operator's manual
Models C315/350 also include one 12" and one 14" blade
Contact us with what application you will be using this saw for, and we can assist in providing you with the correct blade
Product Specifications
Circular Capacity @ 90°: 4"
Rectangular Capacity @ 45°: 3-1/4" x 2-3/4" right; 3" x 2-3/4" left
Square Capacity @ 45°: 3-1/2"
Rectangular Capacity @ 45°: 4-3/4" x 3"
Spindle Speed(s): 33/66 rpm
Motor: 3 hp, 220/440V, 3 ph.
Circular Capacity @ 45°: 3-1/2" right; 3" left
Square Capacity @ 45°: 3" right; 2-3/4" left
Net Weight: 365 lbs.
Vise Size: 6-1/4 max. opening
Blade Dia: 12" max.
|
|
|
14" 3 HP Cold Saw (KMT) Lot #487 (Sale Order 487 of 1039) Simple operation and maintenance
Saw blades can be resharpened and re-toothed
High quality, burr-free finish
Standard are 24-volt controls, mitering capacity, high speed steel blade, stock stop, built-in coolant and operator's manual
Package includes one blade; contact us with what application you will be using the saw for, and we will assist in providing you with the correct blade
Product Specifications
Vise Size: 6-1/4" max. opening
Square Capacity @ 45°: 3-1/4" right; 2-1/4" left
Blade Dia: 14" max.
Net Weight: 500 lbs.
Motor: 3-1/2 hp, 220/440V, 3 ph.
Spindle Speed(s): 30/60 rpm
Circular Capacity @ 90°: 4-1/4"
Rectangular Capacity @ 90°: 6-1/2" x 3"
Square Capacity @ 90°: 4"
Circular Capacity @ 45°: 3-3/4" right; 2-1/2" left
Rectangular Capacity @ 45°: 3-1/4" x 2-3/4" right; 2-1/4" x 3-1/4" left
|
|
|
Cold Saws (WT Import) Lot #488 (Sale Order 488 of 1039) Standard equipment includes control handle with trigger, motor and switch, coolant system, clamping vise, bar stopped vise, service tools and toolbox, operation manual and spare parts list. Coldsaw blade not included. Saws also come with build gearbox reducer and quick locking vise.
Product Specifications
Square Capacity @ 90°: Tubing, 3-1/2"
Feature: Oil bath reduction gearbox ratio, 34:1
Net Weight: 308 lbs.
Circular Capacity @ 45°: Solid, 2-3/4"; tubing, 3-5/8"
Square Capacity @ 45°: Tubing, 3-1/8"
Rectangular Capacity @ 45°: Tubing, 3-1/4" x 2-7/8"
Rectangular Capacity @ 90°: Tubing, 4-1/2" x 2-7/8"
Blade Size: 12" max.
Blade Speeds: 42/84 rpm
Motor: 2.2 hp, 220V, 3-phase
Vise Size: 4-5/8 vise cap.
Circular Capacity @ 90°: Solid, 3-1/8"; tubing, 4"
|
|
|
10" Bench Drill Press (Wilton) Lot #489 (Sale Order 489 of 1039) Powerful 1/2-horsepower ball bearing induction motor
Five speeds to match types and sizes of material to be drilled
Rack and pinion table elevation system for easy, precise height adjustment
Cast iron work table tilts 45 degrees left or right for angle drilling
Two holes on base provide easy clamping or bolting to bench
Lock-off switch with removable key
Built-in work light for better visibility
Includes chuck key
Product Specifications
Net Weight: 63.8 lbs.
Chuck Size: 1/2"
Speed(s): 5 (570, 900, 1,390, 2,050, 3,050 rpm)
Table Size: 7-3/4" sq.
Motor: 120V AC, 3.2 amps, 1/2 hp
|
|
|
15" Floor Drill Press (Wilton) Lot #490 (Sale Order 490 of 1039) Cast iron head
Large 1-7/8 inch quill allows greater accuracy
Head casting with permanently lubricated ball bearing spindle assembly
Four heavy-duty ball bearings mounted in an enclosed quill for extended lift
Massive T-slotted production work table
2-7/8 inch ground steel column diameter for maximum head and table support
Accurate depth stop for precise hole depths
Comes standard with a 5/8-inch drill chuck and arbor. Two-year manufacturer warranty.
Product Specifications
Dimensions: 13-3/8" W x 26" D x 63-1/2" H
Base: 11" x 19-1/2"
Stroke: 3-3/8"
Capacity: 5/8" in cast iron, 1/2" in steel
Net Weight: 185 lbs.
Spindle Taper: #2 Morse taper
Warranty: 2-year limited
Spindle Speed(s): 250, 340, 390, 510, 600, 650, 990, 1,550, 1,620, 1,900, 2,620, 3,100
Quill Dia: 1-7/8"
Spindle Distance: 48-3/4" to base
Working Dim: 10" x 10"
Drill Depth: 15" to center
Quill Travel: 3-3/8"
Chuck Size: 5/8" key chuck
Table Size: 10" x 10"
Motor: 3/4 HP, 1 ph., 115 V, 1,725 rpm
Column Dia: 2-7/8"
|
|
|
15" Vari-Speed Drill Press (Wilton) Lot #491 (Sale Order 491 of 1039) Power of speeds from 400 to 5,000 rpm
Simple hand wheel adjustment to set the speeds; immediate speed reading appears on the LED display
Substantially constructed solid base for drilling
A greater range in spindle speeds than any other in its class
Larger quills for greater accuracy
Large production worktable that gives operator room to work and support the job
Full bearing support
Rack and pinion table
3-inch column for head support; quill is also supported to lessen deflection
Three-phase drill press also available
Product Specifications
Capacity: 5/8" max. in cast iron, 1/2" max. in steel
Working Dim: 12-1/2" x 14-1/2"
Table Size: 15-1/4" x 17-3/4"
Chuck Size: 1/2" drill chuck; #2M arbor
Motor: 115/220V, 1 ph., 1 hp with rotary drum switch
Net Weight: 426 lbs.
Warranty: 2 years on parts; 1 year on electronics
Spindle Speed(s): 400 to 5,000
Drill Depth: 15" to center
Quill Dia: 2-1/4"
Quill Travel: 6"
Spindle: 41" to table, 47-1/2" to base
Height: 67-1/2"
Spindle Taper: #2 MT
T-Slot: 1/2"
|
|
|
17" Laser Drill Press (Delta) Lot #492 (Sale Order 492 of 1039) Fully adjustable laser pod projects a crosshair on the workpiece to indicate bit contact location
Large, redesigned base helps promote greater tool stability
Woodworker's table has a removable insert for through drilling with large bits and accommodates sanding drums as well
Unique table is designed to eliminate auxiliary fixtures by tilting left, right and forward
Large quill stroke capacity allows users to drill a variety of demanding operations
Heavy-duty 3/4-horsepower motor provides ample power for demanding applications
Largest in class cast iron head provides smooth drilling with minimal vibration
Integrated task light provides improved visibility in the drilling area
Product Specifications
Column Dia: 3.15"
Capacity: Chuck to table, 24-1/2"; chuck to base, 47"
Chuck Taper: Jacobs 3
Net Weight: 238 lbs.
Table Size: Work size, 18" x 14"
Dimensions: 70" H x 18" W
Motor: 3/4 hp, 1 ph., 120/240V, 60 Hz
Max Dia: Steel, 5/8"; cast iron, 7/8"
Stroke: 4-7/8"
Quill Dia: 1-3/4"
Spindle: MT2
Chuck Size: 5/8"
Speed(s): 250-2,750 rpm
Table Tilt: 90°
|
|
|
20" Drill Press (Delta) Lot #493 (Sale Order 493 of 1039) Drilling that won't put a hole into your budget:
1-horsepower induction motor provides ample power for production-type drilling
Quill has an internal #3 Morse taper to accept tapered drill press accessories and standard-equipment spindle adapter required for mounting the three-jaw chuck
Speeds meet requirements for low-speed metal and high-speed wood drilling specialty operations
Slow-speed options and coolant trough make easy work of metal drilling
Rack and pinion table raising/lowering system
Production-sized table tilts up to 45 degrees left and right.
Integral slots for clamping the workpiece
Quick-release motor mount loosens belt tension for fast and easy speed changing
Complete package includes pulleys, belts and control, 5/8-inch capacity chuck and key, rack and pinion-type table raising mechanism, #3 Morse taper spindle adapter and instructions
Product Specifications
Capacity in Steel: 1" in steel; 1-1/8" in cast iron
Spindle: MT2
Motor Control: Push button
Column Dia: 3-5/8"
Table Size: 18-3/8" x 16-1/8" cast iron, production type w/clamping slots and coolant trough.
Capacity: 0-5/8" drill chuck: 24-1/2 chuck to table; 44" chuck to base
Base: 22-3/4" x 17-3/4"
Motor: 1 HP, 1 ph., 115/230V, 60 Hz
Speed(s): Variable, 200-2,500 rpm
Dimensions: 67" H x 18-1/2" W x 34" D
Stroke: 6"
Chuck Taper: Jacobs 3
Quill Dia: 2"
Table Tilt: 0-45° left and right
|
|
|
20" Drill Press (Shop Fox) Lot #494 (Sale Order 494 of 1039) A radial drill press is one of the most versatile and handy types that you can add to your shop, and the Shop Fox, ruggedly constructed under strict quality control, fills the bill.
Between the tilt of the head and tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add the 20-inch swing, and you have one of the best values available in a drill press.
Other features are table T-slots, coolant channel, built-in 110-volt light socket (bulb not included) and 1-1/4 inch drilling capacity.
Product Specifications
No. of Spindle Speeds: 12
Height: 70"
Table Size: 18-3/4" x 16-3/4"
Spindle Speed(s): 210-3,300 rpm
Motor: 1-1/2 hp, 110/220 V
Chuck Size: 20"
Swing: 20"
Arbor: JT-3
Spindle Travel: 4-3/4"
|
|
|
32" Radial Drill Press (WT Import) Lot #495 (Sale Order 495 of 1039) Cast iron table and base with two 5/8-inch slots in each for clamping workpiece. Base has two pre-drilled holes for bench mounting.
Product Specifications
Swing: 10" - 31"
Chuck Size: 1/2
Hole Size: 3/8" max. in steel, 1/2" max. in cast iron
Table Size: 10" dia. Round
Distance: Chuck to table, 13"; chuck to base, 17"
Type: 3-1/4
Spindle Taper: 2MT
Spindle Speed(s): 5 (550, 880, 1,520, 2,490, 3,470 rpm)
Ram Travel: 10"
Quill Dia: 1-9/16"
Dimensions: 32-1/4" H x 9" W x 32" D
Motor: 1/2HP, 120V, 1 ph., 60 Hz
Head Tilt: 90° left, 45° right
Net Weight: 85 lbs.
|
|
|
4" Mini Drill Press (WT Import) Lot #496 (Sale Order 496 of 1039) Calibrated swivel table, rack and pinion table adjustment. Keyed chuck included.
Product Specifications
Net Weight: 45 lbs.
Motor: 1/3 hp
Chuck Size: 1/2" keyed
Height: 23"
Speed(s): 5
Strokes: 2"
Swing: 4"
Table Area: 6-3/8 x 6"
Tapered Mount: 33JT (male)
Column Dia: 1-3/4"
RPM: 585-3,000 rpm
|
|
|
Bench Model Drill Presses (WT Import) Lot #497 (Sale Order 497 of 1039) Calibrated swivel tables; rack and pinion table adjustment. Keyed chucks included. Both presses accept taper shank drills.
Product Specifications
Taper Spindle: 2MT
Motor: 1/2 hp
Height: 38"
Table Size: 11-1/2" dia.
Stroke: 3"
Spindle Speed(s): 230-3,200
Net Weight: 110 lbs.
Column Dia: 2-7/8"
Chuck Size: 5/8"
Speed(s): 16
Swing: 13"
|
|
|
Electromagnetic Drill Base (Milwaukee) Lot #498 (Sale Order 498 of 1039) For use on any flat ferrous material, 1/2 inch and thicker
Variable speed
Solid state electronic switching
11-inch drill travel
Adjustable position on base makes lining up bit easier and faster
Feedback speed control maintains speed
Motor/magnet lockout prevents de-mag during operation
Fixed cord
ISO certified
Product Specifications
Motor: 120V AC, 12.5 amps
Net Weight: 49 lbs.
Dimensions: 17-1/4" W x 4-1/4" W x 11" H
Cord Length: 9 ft.
|
|
|
Electromagnetic Drill Stand (Milwaukee) Lot #499 (Sale Order 499 of 1039) Variable speed base works on any flat ferrous material, 1/2 inch or thicker
With speed control
Solid state electronic switching
9-inch drill travel
Feedback speed control maintains speed
Motor/magnet lockout prevents de-mag during operation.
ISO certified
Product Specifications
Dimensions: 15" H x 4-1/4" W x 11" L
Net Weight: 41 lbs.
Motor: 120V AC, 12.5 amps max
|
|
|
Heavy-Duty Electromagnetic Drill Press (Milwaukee) Lot #500 (Sale Order 500 of 1039) Strong two-coil magnet provides 2,300 lbs. of deadlift force on 1-inch thick steel
Two positions for feed handle -- relocate without tools
Simple two-button control panel is unobstructed by feed handle
Great choice for remote drilling in metal
Comfortable carrying handle well positioned for balance
Cutter wrenches stored onboard.
Very portable
Accepts standard 3/4-inch Weldon shank cutters
Optional three-jaw chuck is available for use with twist drill bits
Comes complete with lubricant spray bottle, nylon safety strap and two hex wrenches
ISO certified
Product Specifications
Shank: Weldon
Capacity in Steel: Annular cutter, 1-1/2" dia., 2" depth of cut; twist bit, 1/2" dia., 4-1/4" depth of cut
Drilling Capacity: 1/2"
Motor: 9 amp, 1.1 max hp, 120V AC
Net Weight: 26.5 lbs.
RPM: 450 no load
|
|
|
Magnetic Portable Drill Press (Unibor) Lot #501 (Sale Order 501 of 1039) Machine features integral arbor support, solid state electronic control panel, reversible handles, powerful magnet and supplied coolant system. Magnet adhesion is 1,900 pounds. Adapter is available for twist drilling. Use replacement arbor P-M0502.
Product Specifications
Thickness: 1/2"-2"
Stroke: 4-3/4"
Dimensions: Magnet, 6-1/4" x 3-1/8" x 2"
Net Weight: 28 lbs.
Height: 13"
RPM: 450 no load
Motor: 2 hp, 1,600 W, 120V AC, 6 amps
Drilling Capacity: 1/2", 1-3/8"
|
|
|
Unibor Model EQ100 Mag Drill Lot #502 (Sale Order 502 of 1039) Integral arbor support
Solid state electronic control panel
Supplied with coolant system
Variable speed control
Quick conversion to twist drilling
Two gear ranges
Available swivel base
4-inch broaching capacity
QuickHitch® arbor for fast, easy cutter changes
Drill capacity of 1.5 to 4 inches (please call sales department to discuss applications)
ISO certified
Product Specifications
Speed(s): 40-130, 145-430 (no load)
Capacity: 1-1/2" twist drill, 4" hole cutter
Strokes: 10-1/4"
Morse Taper: 3MT
Type: Electromagnetic drill
Net Weight: 58 lbs.
Motor: 1.5 hp, 1,800W, 110V AC, 10.6 amps
Height: 21" (down position)
Thickness of Cut: 1/2"-3" (max. up to 6")
|
|
|
Floor Model Drill Presses (WT Import) Lot #503 (Sale Order 503 of 1039) Calibrated swivel tables; rack and pinion table adjustment. Keyed chucks included. Accepts taper shank drills.
Product Specifications
Height: 68"
Swing: 16-1/2"
Table Size: 13-3/4"
Strokes: 3"
Speed(s): 16 (200-3,630 rpm)
Taper Spindle: 2MT
Chuck Size: 5/8"
Column Dia: 3-1/8"
Motor: 1 hp, 110V
|
|
|
Floor Drill Presses (JET) Lot #504 (Sale Order 504 of 1039) Hinged metal belt and pulley cover, coupled with quick adjustment motor mount, allows rapid changing of spindle speeds
Rotating, plus-or-minus 45 degrees tilting, crank-operated worktable with quick release clamp
On/off switch located on front of the drill press head
1/2-inch diameter external positive depth stop with three-nut locking feature for quick adjustment
Adjustable tension spindle return spring
Spindle supported by high-quality ball bearings
Built-in work lamp; bulb not included
Drill chuck and key included
ISO certified
Five-year manufacturer warranty
Product Specifications
Motor: 1-1/2 hp, 1 ph, 115V/230V, prewired 115V
Column Dia: 3-3/8"
Net Weight: 288 lbs.
Base: 13-5/8" x 22-3/4"
Spindle Speed(s): 150-4,200 rpm
No. of Spindle Speeds: 12
Spindle Taper: MT-3
Drilling Capacity: 1"
Chuck Size: 3/4"
Spindle Travel: 4-5/8"
Warranty: 5 years
Distance: Spindle to base, 46-3/4" max.; spindle to table, 29-1/8" max.
Table Size: 18-5/8" x 16-1/8"
Swing: 20-1/2"
|
|
|
Magnetic Core Drills (Fein) Lot #505 (Sale Order 505 of 1039) These magnetic drills are the most advanced on the market today. Unlike most mag drills, FEIN designs and builds all the components of Models KBM 32Q and 50Q. This creates a unique, low-profile tool that holds better and fits in more places. These drills bring many qualities to the shop -- they're compact, lightweight, precision engineered, durable and precise.
Drill features:
Integrated cooling -- coolant flows through the cutter for clean cuts and extended tool life
20 to 40 percent lighter weight
Quick-IN® quick change tooling adapters -- switch tools without keys; continue to use present tooling
Advanced motor technology for tremendous power and torque
Use carbide or high speed steel cutters; twist drill with drill chuck or taps
Continuously variable stroke range --- make fast, safe tool changes without removing the drill from work
Precise, distortion-free drilling with hardened aluminum dovetail rack
Accessories are carrying case, coolant pump, safety strap, chip hook, three-jaw chuck, arbor, centering pins, wrenches and Quick-IN adapters for competitive cutters
Product Specifications
Chuck Size: 5/8"
Speed(s): 260/520 RPM
Stroke: 5-5/16"; 12-3/16" total
D: 2"
Base: 3-1/2" x 7"
Capacity: 2-1/16"
Holding Cap'ty. (lbs.): 2,472 lbs./93.6 lbs. weight to holding power
|
|
|
Super-Duty Floor Model Drill Presses (WT Import) Lot #506 (Sale Order 506 of 1039) Fully adjustable tilting table
Belts and pulleys
Rack gear
Crank for raising and lowering table
Accepts taper shank drills
Included with each machine: keyed drill chucks; 4-inch drill press vise; Morse taper drill sleeves 1-2, 2-3; Morse taper drift keys 1-2, 2-3; chip brush; and 1/2-inch T-slot production table with coolant trough and drain.
Product Specifications
Motor: 1 HP
Chuck Size: 5/8" keyed
Stroke: 4-13/16"
Height: 70-1/8"
Swing: 21-1/8"
T-Slot: (2) 3/4"
Table Area: 16-1/8" x 18-5/8"
Column Dia: 3-5/8"
Taper Spindle: 4MT
Base: 22.8" x 12.6"
Speed(s): 12 (180-4,200)
|
|
|
Unibor Model EQ35 Magnetic Drill Lot #507 (Sale Order 507 of 1039) Integral arbor support and solid state electronic control panel
Supplied coolant system
New QuickHitch arbor for fast and easy bit changes
Lightweight, only 28 pounds
Magnet adhesion -- 1,600 pounds
ISO certified
Product Specifications
Net Weight: 28 lbs.
Motor: 2 hp, 960 watts, 120V AC, 8 amps
Thickness of Cut: 1/2"-2"
Strokes: 4-3/4"
Height: 15" (down position)
Dimensions: Magnet, 6-1/4" x 3-1/8" x 2"
Speed(s): 550 rpm (no load)
Includes: Electromagnetic drill
|
|
|
Lighted Eye Shields (Baldor) Lot #508 (Sale Order 508 of 1039) Made of shatterproof DuPont Lucite AR. Eye shield accommodates standard 60-watt bulb; adjusts horizontally or vertically; folds up or down; and is easily attached to grinders. Fits 6- to 14-inch Baldor grinders and many other makes of those sizes. UL and CSA approved. Price is per pair.
Product Specifications
Fits: 6"-14" grinders
Size: 5-1/2" x 7"
Type: With on/off switch
|
|
|
12-Ton Hydraulic Press (WT Import) Lot #509 (Sale Order 509 of 1039) With two arbor press plates. Spring automatically retracts ram when jack release valve is opened. Bend, straighten, hold and press for automotive, industrial and general shop applications. Accommodates heavy-duty 12-ton bottle jack.
Product Specifications
Base: 20" x 18-1/2"
Ram Travel: 5-1/2"
Height: 69"
Bed: 16-1/2" x 7-1/4"
Net Weight: 130 lbs.
|
|
|
50 Ton Air/Hydraulic Press (WT Import) Lot #510 (Sale Order 510 of 1039) With 1/4-inch NPT air inlet.
Product Specifications
Capacity: 50 tons
Table Travel: 31" vertical
Pressure: 110-120 PSI
Net Weight: 595 lbs.
Bed: 32.25" W
Stroke: 7-1/2"
Range: 0-31"
|
|
|
Double Acting Dura Press -- Force 25DA (Dake) Lot #511 (Sale Order 511 of 1039) Electric power unit is single phase, 110-volt operation for greater portability. Includes frame, two steel table plates, motor, pressure gage and safety relief valve. Double-acting cylinder and quiet, low-pressure hydraulic components for greater efficiency and smooth pressing. Shipped without oil.
Product Specifications
Width: 28" between uprights; 7" between table channels
Speed(s): 10 ipm
Motor: 1 hp, 110V
Ram Travel: 8" min. and 44" max. ram to table
Base: 30" x 38"
Capacity: 25 tons
Height: 88"
RPM: 1,725
Net Weight: 570 lbs.
Stroke: 10"
|
|
|
Double Acting Dura Press 10DA (Dake) Lot #512 (Sale Order 512 of 1039) Double acting Dura Press features one-hand ram positioning with easy single valve hydraulic control. Electric power unit is single phase, 110-volt operation for greater portability. Includes frame, two steel V-blocks, motor, pressure gage and safety relief valve. Double-acting cylinder with quiet, low pressure hydraulic components for greater efficiency and smooth pressing. Shipped without oil. Leasing available.
Product Specifications
Motor: 1 hp, 110V
Width: 20" between uprights; 4" between table channels
Height: 80"
Speed(s): 20 ipm
RPM: 1,725
Capacity Tons: 10
Base: 24" x 30"
Stroke: 10"
Ram Travel: 4" min. and 40" max. ram to table
|
|
|
Hydraulic Presses (JET) Lot #513 (Sale Order 513 of 1039) For pressing, bending and straightening operations
Easy to use and hand operated with pressure gage for direct pressure readings
Tables raise and lower easily with use of hand crank on the 15-, 35- and 60 ton models
Side frames open for inserting long materials
Fast setup ram extension screw
Ram moves laterally for added versatility (15- and 35-ton models)
Two bed plates and pump handles are standard
Straightness testing support uses centers or V-blocks
Product Specifications
Base: 33-1/2" x 42"
Capacity: 35 ton
Height: 68"
Type: 35 ton
Net Weight: 704 lbs.
Ram Dia: 3"
Strokes: 4-3/4" piston, 4" screw
Table Area: 31" x 10-3/8"
Table Travel: 23-5/8"
|
|
|
Hydraulic Presses (Sunex) Lot #514 (Sale Order 514 of 1039) Press, straighten and bend
All welded steel construction
Heavy-duty return springs for fast ram retraction
Hydraulic power unit; bed plates and bearing punch included.
Reinforced head plate (hydraulic jacks imported)
Product Specifications
Strokes: 7-1/2 in.
Overall Height: 73 in.
Base: 39 in.
Type: 50 ton heavy-duty
|
|
|
Shop Presses (WT Import) Lot #515 (Sale Order 515 of 1039) Steel construction. The many uses include pressing, bending and straightening in industrial or automotive applications. Heavy-duty return springs for quick retraction. Includes hydraulic unit and bed plates.
Product Specifications
Range: 0 - 28-3/4"; 32" between channels
Capacity: 50 tons
Includes: 0-14,000 PSI gage; 2-speed pump to operate ram slow or fast
Dimensions: 74" H x 50" W x 31-1/2" D
|
|
|
6" Variable Speed Bench Jointer (Delta) Lot #516 (Sale Order 516 of 1039) Variable speed range allows you to select the right speed for the size and hardness of the material you're cutting
Center mounted fence gives needed support throughout the cut for accurate edge jointing
Fence tilts 0 to 45 degrees outward for bevel jointing and chamfering; positive stops at 45 and 90 degrees
Poly-V belt drive for maximum transmission of power to cutter head with minimum belt slippage
Balanced cutter head for smooth operation and maintenance free life
Two-knife cutter head with jack-screw knife leveling arrangement and head lock for easy individual knife replacement and adjustment
Convenient infeed table raising and lowering control with dual English/metric scale facilitates depth of cut adjustment; lock knob securely holds desired setting
Built-in chip chute directs dust and chips away from operator, motor and electrical
Rubber base pads minimize operating vibration and dampen noise level
Extra large table provides ample work support for surfacing stock up to a full 6 inches wide
Includes two-knife cutter head with guard, push blocks, wrenches and instruction manual
Product Specifications
Net Weight: 35 lbs.
Tilt: 45° out
Dimensions: 13.5" H x 30" L x 18" W
Speed(s): 6,000-11,000 rpm variable
Fence: 4-1/4" x 19-3/4"
Cut: 12,000-22,000 per/min.
Table Size: 6-3/16" x 30"
Capacity: 6-1/8" W, 1/8" D max.
Motor: 10 amps, 120V
|
|
|
7" Industrial Rabbeting Jointer (WT Import) Lot #517 (Sale Order 517 of 1039) Fence has positive stops at 45 and 90 degrees. Rabbeting ledge is 3-3/4 inches. Includes stand.
Product Specifications
Cutting Width: 7"
Max Depth of Cut: 1/2"
Cut: Rabbet, 1/2"
Fence: 35-3/8" x 3-3/4"
Cutter Head: 4,655 rpm
Tilt: Fence, 45°
Dimensions: 47-1/2" x 19-1/2" x 36-1/2"
Net Weight: 230 lbs.
Motor: 1 hp, 110V, 5.9 amps
|
|
|
Deluxe Mortiser (Delta) Lot #518 (Sale Order 518 of 1039) Easy, open access to drill chuck for bit changing
Adjustable depth stop
Chuck key/hex wrench for bit and chisel changing
Large cast iron base with center through hole
Adjustable rack and pinion fence and rack and pinion head raising and lowering
Mortising head column can be turned 180 degrees and remounted for off-table mortising
Adjustable dovetail way on mortising head
Tool and chisel tray
Gas-filled head stabilizer
Height attachment adds 1 3/4 inches of capacity under head
Multi-position feed lever
Machine comes with tool and chisel holder; riser block; instruction manual; and four mortising chisels, sizes 1/4, 5/16, 3/8 and 1/2 inch square, with 5/8-inch maximum diameter shank); and bits
Product Specifications
Motor: 1/2 hp, 1,725 rpm
Dimensions: Head to base, 9-3/8"; chisel center to fence, 3-3/4"; under hold down, 3-3/4"
Travel: Head, 5"
Net Weight: 55 lbs.
Overall Dimensions: 30" H x 13.5" W x 16.25" D
Stroke: 5" max.
Chuck Size: 3/8"
Base: 16.25" x 13.5"
Fence: Each side, 2-15/16" x 5-13/16"; overall, 13-5/8" L
|
|
|
Mortising Machine (WT Import) Lot #519 (Sale Order 519 of 1039) Makes 1/4-, 3/8- and 1/2-inch square holes in minutes
Makes mortise and tenon joints in furniture and cabinets
Fence with hold-down clamp keeps work securely in place
Includes 1/4-, 3/8- and 1/2-inch bits, fence and clamp
Product Specifications
Motor: 1/2 hp
Table Area: 13-3/8" x 6"
Throat: 5"
Spindle Speed(s): 3,580 rpm
Strokes: 5"
Base: 10" x 7-3/4"
|
|
|
44F MetalAce English Wheel Lot #520 (Sale Order 520 of 1039) Mounted on 3-inch casters, the sturdy welded frame offers on-the-go metal bending for racing needs, auto restoration and aircraft rebuilding. The 44F is for any metal crafting need -- monster job or simple task. This English wheel is great for aggressive bending or smoothing a wrinkled surface. Just ask the folks in professional auto racing or the owners of collision repair centers.
Features:
Storage for anvil wheels
Screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90-degree rotation of the control handle
When rotated back to operating position, the original pressure setting is re-established
Anvil yoke is adjustable on both sides of the axle support with thumbscrews, so the anvil wheel can be made true with the upper wheel
Upper wheel is 1045 alloy steel billet, polished to a smooth 63 finish and measures 8 inches deep by 3 inches wide
Includes six anvil wheels also made from 1045 alloy steel: 3-inches wide by 3 inches deep; radii: 2.375", 3.25", 5", 8.5", 12" and flat
Product Specifications
Type: For large projects
Throat: 44"
Wheel: Upper, 3" W x 8" dia.; anvil, 3" W x 3" dia.
Capacity: 16 gauge steel; 1/8" aluminum; 88" max. panel size
Net Weight: 450 lbs.
Dimensions: 73" H x 59" W; 48" working ht.
Base: 32-3/4" x 38" tubular steel legs
Style: Tubular steel frame
|
|
|
English Wheel (WT Import) Lot #521 (Sale Order 521 of 1039) The English wheel is a manually operated machine used with sheet metal, such as mild steel. This metal fabricating machine executes smooth shapes and complex contours. Ideal for home garage, auto repair, air hangar, custom street rod or bike shop. Shape, form and bend metal into custom parts, or use the machine to repair existing ones. Great for work with specialty vehicles of all kinds.
90-degree swivel head
Flat upper roll measures 2.25" W x 6" D
Bottom roll sizes: 1/8-, 1/2-, and 3/4-inch edge radius by 6-inch crown radius
Flat with 5/16-by-1/4-inch step
1.55" W x 0.65" D groove
0.82" W x .065" D groove
Two flat rolls
Detailed instruction manual included
Product Specifications
Throat: 37-3/4"
Net Weight: 170 lbs.
Capacity: 16-gauge mild steel
Dimensions: 53" H x 30-7/8" W x 44.5" D
|
|
|
MetalAce 22B Bench English Wheel Lot #522 (Sale Order 522 of 1039) The most popular in-home English wheel. Trick out your custom-built bike or complete hobby projects without breaking the bank. Provides outstanding performance on small jobs, such as motorcycle tanks, tank covers, seat cowls and aircraft fillets.
Features:
Versatile use -- mount on bench, clamp in vise or use with optional welded stand
Anvil yoke is adjustable on both sides of the axle support with thumb screws, so the anvil wheel can be made true with the upper wheel (1045 alloy steel billet, polished to a smooth 63 finish)
Additional wheels and stand sold separately
Product Specifications
Style: Tubular steel frame
Capacity: 16 ga. steel; 3/32" aluminum; 44" max. panels
Dimensions: 29" H x 27" W; 42-3/4" work ht. with optional stand
Net Weight: 73 lbs.
Base: 6" x 19"
Throat: 22"
Includes: 2.375" R anvil wheel
Wheel: Upper, 2" W x 8" dia.; anvil, 2" W x 3" dia.
|
|
|
Planishing Hammer (WT Import) Lot #523 (Sale Order 523 of 1039) Planishing hammers are designed to shape, form, stretch and planish (smooth out) sheet metal, aluminum, copper and brass. Ideal for metalworking and auto and motorcycle body work. Work on custom street rods and race cars; repair aircraft panels and cowling; shape motorcycle gas tanks; smooth metal; or craft your own custom parts. The planishing hammer is a versatile tool for the metalworking shop, vehicle garage or air hangar. Height adjustment, 1-1/2 inches.
Product Specifications
Throat: 24"
Net Weight: 115 lbs.
Dimensions: 62" H x 30-7/8" W x 34-1/2" D; frame tube size, 4" x 4"
Opening: Head, 2-1/2"
CFM: 12
Pressure: 15-120 PSI required
BPM: 1,600
Head: 2-1/2" opening
|
|
|
Deluxe Power Mill & Drill Machine w/Power Downfeed (Import) Lot #524 (Sale Order 524 of 1039) Forward and reversing switch for tapping. Head swivels 360 degrees. Comes with stand, 1/2-inch chuck and a 2-1/2 inch angle vise.
Product Specifications
Height: 6' 1.5" (incl. stand)
Table Travel: 19-3/4" max. (Y)
Spindle Taper: R8
Cross Slide Travel: 7" (X)
Column Dia: 4-1/2"
Swing: 15-7/8"
T-Slot: 5/8"
Swivel Radius: 360°
Drilling Capacity: 1-1/4"
Spindle Dia: 3" sleeve
Table to Spindle: 18" max.
Feed: .004, .005, .009, .011, .014; and .017 rev.
Working Dim: 28-3/4" x 8-1/4"
End Mill Capacity: 3/4"
Stroke: 5"
Speed(s): 24 (60-2,500 RPM)
Motor: 2 hp, 3 ph. 220V
|
|
|
Gear Head Drilling & Milling Machine (WT Import) Lot #525 (Sale Order 525 of 1039) Rugged construction
Fine-grained cast iron head and main casting
Head tilts 90 degrees in either direction
Automatic downfeed to spindle
Automatic stop to power feed when preset drilling depth is reached
Square production table has 1/2-inch T-slots
Product Specifications
Drilling Capacity: 1-1/2"
Column Dia: 4-1/2"
Spindle Speed(s): (6) 105, 300, 390, 515, 1,400, 1,820 rpm
Motor: 1 hp, 220V, 3-ph.
Tap Capacity: 7/8"
Stroke: 4-1/2"
Swing: 20"
Spindle Taper: R8
Table Area: 21" x 18-1/2"
T-Slot: 1/2"
Arbor: 1" R8 shell mill
Face Mill Capacity: 4"
End Mill Capacity: 1-3/16"
|
|
|
Geared Head Mill & Drill Machine with Dovetail Column Lot #526 (Sale Order 526 of 1039) This machine is designed for drilling, reaming and counterboring. With rigid dovetail column and adjustable tilting headstock. Includes 3-inch face cutter, 3-inch angle vise and wrench.
Product Specifications
Spindle Speed(s): (6) 120-1,970 rpm
Table Size: 32-1/4" L x 9-1/2" W
Spindle Distance: Bet. nose & table, 18-3/4"
Face Mill Capacity: 3-1/8" max.
Motor: 1-1/2 hp, 110V, 1 ph.
Spindle Travel: Between axis & column, 10-1/4"
Table Travel: 21-1/2" L x 7-1/2" C
End Mill Capacity: 1-1/4" max.
Drilling Capacity: 1-3/4" max.
Headstock Swivel: 45° R to L
Tap Capacity: 1/2" max.
Spindle Taper: R8
|
|
|
Geared Head Milling & Drilling Machines (Import) Lot #527 (Sale Order 527 of 1039) Machine features include R8 spindle, six speeds, forward-stop-reverse switch and spindle downfeed scale with stop. Table locks on both X and Y axis, and graduations are .05 millimeter.
Product Specifications
Milling Capacity: 1-1/4"
Throat: 11-3/16"
Headstock Swivel: 360°
Drilling Capacity: 1-1/4"
Quill Dia: 2-3/4"
Head Movement: 45° right to left
Cross Slide Travel: 9-7/8"
Spindle Taper: R8
Table Area: 28-1/8" x 8-1/4"
Spindle Speed(s): (6) 120-1,970 rpm
Column Dia: 4"
Quill Stroke: 4-3/4"
Headstock: 13-9/16"
Height: 43-5/16"
Travel: 17-3/4" longitudinal
T-Slot: 1/2"
Motor: 1-1/2 hp, 220V, 1 ph.
Face Mill: 3-1/8"
|
|
|
Hobby Milling & Drilling Machine (JET) Lot #528 (Sale Order 528 of 1039) Cast iron design
Powerful 150-watt DC motor
Variable speed with two-step gear box
Left hand spindle rotation allows for tapping
Right/left tilt table column for flexible work
Compound table precision machined with adjustable dovetail guides
Micro adjustable spindle downfeed
Drawbar
Keyless chuck with MT2 arbor
Drilling and milling guard
Product Specifications
Net Weight: 88 lbs.
Dimensions: 24-3/4" H x 11-3/4" W x 21-1/2" L
Motor: 150W DC
Table Size: 5-3/4" x 9-1/2"
End Mill Capacity: 3/8 3/8"
Face Mill Capacity: 3/4"
Drilling Capacity: 3/8"
Spindle Distance: To column, 5-1/2"; to table, 8-1/4" max.
Spindle Taper: MT2/M10
Spindle Speed(s): Variable (100-1,000/200-2,000 rpm)
|
|
|
JET JMD Milling & Drilling Machine Lot #529 (Sale Order 529 of 1039) Extra large worktable
Hinged belt cover allows faster speed changing
Heavy-duty tapered roller bearings support the spindle
Positive and easy-to-read external depth gage
Easy-to-read dials with satin finish
360-degree head swivel
Work lamp provides ample illumination of workplace
Work lamp, adjustable carbide face mill and drill press angle vise included.
Chuck arbor
Draw bar
Product Specifications
No. of Spindle Speeds: 150-3,000 rpm
Cross Slide Travel: 7"
Dimensions: 42-1/2" L x 39-3/4 W x 43-1/2" H
Motor: 2 hp, 1 phase, 230 V only
T-Slot: (4) 5/8"; 1-3/16" centers
Net Weight: 740 lbs.
Table Travel: 20-1/2" max.
Quill Dia: 3"
Spindle Travel: 5" manual
Spindle Taper: R-8
Swing: 15-7/8"
End Mill Capty: 3/4"
Face Mill: 3"
Drilling Capacity: 1-1/4" 1-1/4"
Base: 13-3/4" x 23-3/4"
Column Dia: 4-1/2"
Distance: 18" spindle to table
|
|
|
Micro Milling Machine (Shop Fox) Lot #530 (Sale Order 530 of 1039) This Micro Mill is perfect for machining high precision small parts for working models. It includes a digital depth readout, compound slide table, micro downfeed knob and variable speed control.
Product Specifications
Speed(s): 0-3,600 low range, 0-5,000 high range
Motor: 0.2 hp, 2 amp, 110 V, 1 ph.
Drilling Capacity: 1/4"
Spindle Taper: JT1
Spindle Travel: 1.5"
Spindle: 6.5" to column
Swivel Radius: 360° column swivel
Net Weight: 27 lbs.
Table Travel: 2.75" longitudinal, 5.5" cross
Table Size: 3.5" x 8"
Headstock: 7-3/4" travel
|
|
|
Mill & Drill Machine with Power Downfeed & Anilam DRO (JET) Lot #531 (Sale Order 531 of 1039) Special package from JET includes free 52-piece clamping kit and 1-2-3 block set ($165 value), and free shipping directly from the manufacturer.
Features:
One-piece cast iron column for added support
Belt cover quick slide latch allows faster adjustment to change spindle speeds
Base taper for easier cleanup
Larger handwheel knobs
UL Listed motor
Extra large worktable
Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
New positive quick-stop knob and easy to read internal depth gage
360-degree head swivel
Heavy-duty power downfeed with manual fine feed
Work lamp
Adjustable carbide face mill
Drill press angle vise
Draw bar
Product Specifications
Spindle Taper: R8
Spindle Speed(s): 12 (150-3,000 rpm)
Quill Dia: 3"
Spindle Distance: To table, 26" max.
Longitudinal Travel: 24"
Cross Travel: 7"
T-Slot: Four 5/8"; centers, 1-3/16"
Capacity: Table, 400 lbs.
Drilling Capacity: 1-1/4"
Face Mill Capacity: 3/4"
Swing: 15-7/8"
Column Dia: 4-1/2"
Quill Travel: 5"; with power feed, 4-1/4"
Table Size: 9-1/2" x 31-3/4"
Motor: 2 hp, 1 ph., 230V only
Overall Dimensions: 42" L x 40" W x 52" H
Net Weight: 787 lbs.
Chuck Size: 1/2"
End Mill Capacity: 3/4"
Downfeed: .004", .007", .01"
|
|
|
Mini Variable Speed Mill & Drill (WT Import) Lot #532 (Sale Order 532 of 1039) This mini mill and drill machine has many features and functions. Features include dovetail column, adjustable dovetail ways on column, adjustable depth stop, fine feed head control, geared drive, clear guard, rubber chip guards and safety shutoff switch. Functions are drilling and end and face milling.
Product Specifications
Cross Slide Travel: 4" max.
Spindle Travel: 7" max.
Spindle Taper: R8
Table Travel: 8-1/2" max.
Spindle: 45° L & R (rotary angle)
Face Mill Capacity: 1-1/8"
End Mill Capacity: 5/8"
Spindle Speed(s): Variable, 0-2,500 rpm
Drilling Capacity: 1/2"
Motor: 1/2 hp, 110V DC
Table Size: 3-5/8" x 15-3/4"
|
|
|
Tabletop Vertical Mills with R8 Taper (WT Import) Lot #533 (Sale Order 533 of 1039) Sturdy mill has adjustable gibs on both cross and horizontal feed devices
Table control feeds have large chrome micrometer dials
Spindle has adjustable stop with scale
Head of machine can swivel 360 degrees
Downfeed has rapid and fine feed controls
Has full size quill supported by taper and/or roller bearings
Product Specifications
Table Travel: 19-3/4"
Spindle Travel: 5"
Cross Slide Travel: 7"
Column Dia: 4-1/2"
Swing: 15-7/8"
Spindle Speed(s): (12) 120-2,500 rpm
T-Slot: 1/2"
End Mill Capacity: 3/4"
Motor: 2 hp, 110V, 1 ph.
Table Area: 28-3/4" x 8-1/4"
Drilling Capacity: 1-1/4"
|
|
|
3-in-1 R8 Multi-Purpose Machine (WT Import) Lot #534 (Sale Order 534 of 1039) This multi-purpose machine is suitable for processing metal, wood and other materials. It consists of bed, headstock, drilling and milling units, work table, tailstock and motor. It incorporates turning, drilling and milling in one machine.
Uses milling X and Y power feed; turns, mills, drills and cuts threads
Drill/mill head rotates 180 degrees; turns, mills, drills and cuts threads
Workable feed can be controlled automatically and manually in longitudinal and cross direction. Cross direction provides power feed for milling operation.
Includes 5-inch three-jaw chuck, 3MT and 4MT dead centers, four-way tool post, change gears, and 1/2-inch drill chuck with R8 arbor.
Maximum distance between spindle center and column: 11-7/32 inches
Maximum distance between nose and table: 12-3/64 inches
Longitudinal lead screw threads can be cut 6 TPI/4 mm
Inch thread can be cut 4-120 TPI/0.2-6 mm
Stand included with purchase
Product Specifications
Swing: 16-1/2"
Table Size: 18-11/16" x 6-19/64"
Diameter: 3-1/8" milling cutter
Spindle Taper: R8 (drill/mill), 4 MT (turning)
Spindle Travel: 4-21/64"
Spindle Speed(s): 16 (120-3,000 RPM)
Feed Type: 0.002-0.014"/0.05-0.35 mm
Drilling Capacity: 55/64"
End Mill Capty: 1-3/32"
Motor: 3/4 hp, 1 ph., 110V
Distance Bet. Centers: 31-1/2"
Travel: 18-7/64" max. longitudinal; 7-7/8" max. cross
Tailstock: 3" travel, 3MT taper
Spindle Hole: 1-3/32"
Net Weight: 506 lbs.
|
|
|
10" Auto Planer (WT Import) Lot #535 (Sale Order 535 of 1039) Portable, lightweight design. Planes material up to 10 inches wide. All bearing construction. Easy to adjust or replace blades.
Product Specifications
Depth: 1/8" max.
Motor: 2 hp, 110V
Capacity: 10" x 4-1/8" max.
Dimensions: 17" L x 11-3/4" W x 19-1/4" H
Speed(s): 8,000 rpm
Feed: 26 ft./min.
|
|
|
12-1/2" Planer (WT Import) Lot #536 (Sale Order 536 of 1039) Portable and lightweight, even-cutting and self-feeding. Cutter head consists of two double-edged knives 1.89 inches in diameter.
Product Specifications
Feed: 26.2 fpm
Max Depth of Cut: 1/8"
Motor: 2 hp, 1 ph., 13 amps, 120V
Dimensions: 22.8" L x 18.2" H x 22" W
Idle RPM: 8,000
Cut: 16,000 per min.
Cutter Diameter: 1.89"
Capacity: 5" L (min.), 12.5"W (max.), 2"-6" thick
Net Weight: 68 lbs.
Knives: 2
|
|
|
15" Auto Feed Wood Planer (WT Import) Lot #537 (Sale Order 537 of 1039) Reinforced cast iron bed is precision ground to satin smoothness for perfect finishing. Quick setting for uniform depth. Ball bearing construction. Four heavy-duty support columns.
Product Specifications
Cut: 13,500 per min.
Cutting Width: 15" max.
Feed: 16-1/4" FRM
Thickness: 8" max.
Dimensions: 26" W x 33" D x 44" H
Motor: 2 hp, 220V
Knives: 3
|
|
|
15" Closed Stand Wood Planer (JET) Lot #538 (Sale Order 538 of 1039) Powerful motor and three V-belts deliver full power with magnetic switch
Steel feed rollers, serrated infeed and smoother outfeed, allow for 1/8-inch depth of cut
Cutter head features jack screws with springs to make knife adjustments easy and accurate
Exclusive dust port angled to the side designed for efficient chip removal and to keep dust hose out of the way of work
Two steel work return rollers on top of the machine to make transferring work back easier
Table adjusts quickly and accurately with a handwheel through a positive gear drive system
Cast iron and steel construction for added stability and durability
Table locks to assure no movement while machine is in use
Set of three infeed and outfeed rollers to help support your workpiece
One-piece steel stand with casters with quick-lock foot pedal
Product Specifications
Cutting Width: 14-7/8" max.
Dimensions: 32" W x 44" H x 26" L
Max Depth of Cut: 1/8"
Thickness: 6" max.
Motor: 3 hp TEFC, 1 ph., 230V
Feed: 16, 20 fpm
Blade Size: 15" L x 1" W x 1/8" th.
Cutter Head: 2-13/16" dia.; 4,500 rpm; 13,500 cpm
Knives: 3
Net Weight: 502 lbs.
|
|
|
3/4 HP 1/2" Reversing Wood Shaper (WT Import) Lot #539 (Sale Order 539 of 1039) Cut your finish sanding time 50 percent or more with this top quality reversing 1/2-inch shaper. Just a flip of the switch, and you can "work the grain," regardless of which side of the board you are shaping.
Powerful 3/4-horsepower motor drives the cutters at 8,563 rpm
Each half-fence is independently adjustable from left to right and front to back
Table is finish ground with miter slot
Forward and reverse spindle rotation
V-belt drive system
Spindle blades are not included
Product Specifications
RPM: 8,563
Spindle Dia: 1/2"
Spindle Travel: 7/8"
Motor: 3/4 hp, 1 ph., 115V, 6.5 amps, 6,450 RPM
Table Size: 15-1/2" x 18"
Miter: Slot, 3/4" W
Fence: 3-3/4" x 11" each side
Net Weight: 127 lbs.
|
|
|
Closed Stand Woodworking Shaper (JET) Lot #540 (Sale Order 540 of 1039) Starting pins for irregular shaping
Forward/reverse switch for left and right hand operation
Two reversible spindle speeds let you select the best speed and torque for different cutter diameters
Independent left and right fences feature micro-adjustment and have zero-clearance capability
Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments
Positive detent spindle lock allows safer, easier cutter setup
Dust port connects to your collection system to keep your workplace dust and debris free
Fully enclosed heavy-duty steel stand has a removable cover for easy motor access
1/2 and 3/4-inch interchangeable spindles and router bit collets for use with shaper cutter and router bits Powerful motor delivers dependable power, even on heavy jobs
Solid cast iron table provides a durable work area
Two adjustable work hold-downs to secure your work while shaping
Under nuts are 2-3/16 inches for 1/2- and 1/4-inch spindles
Product Specifications
Net Weight: 190 lbs.
Fence: Two 9-3/4" x 3-1/4"
T-Slot: 3/8" x 3/4"
Table Size: 23-3/8" W x 18-1/8" D
Spindle: 1/4", 1/2"
Collets: For router bit, 1-7/16"
Table Height: 33-1/4"
Opening: Table, 5-1/4" dia.; inserts, 1-5/8", 3-1/4"
Motor: 1-1/2 hp TEFC, 1 ph., 115/230V, prewired 115V
Spindle Speed(s): 7,000 & 9,000 reversing
Dust Port: 4"
Dimensions: 23" W x 25" D x 40" H
|
|
|
36" Radial Drill (WT Import) Lot #541 (Sale Order 541 of 1039) Standard accessories include set of tools, cooling pump, lamp and table. Leasing available.
Product Specifications
Motor: Spindle drive, 2 hp, 220V, 3-ph.; arm elevation, 1 hp, 220V, 3-ph.
Coolant System: 1/8 hp, 100V
Spindle Distance: To base, 43-3/4" max., 11-3/32" min.; from col. surface to spindle center, 36-1/2" max., 8-7/16" min.
Height: Column overall, 72-7/8"
Spindle Feed: 0.002", 0.0035", 0.006"
Headstock: 27-1/2" horiz.
Net Weight: 2,640 lbs.
Morse Taper: 4MT
Spindle Speed(s): 6 (88-1,500 rpm)
Dimensions: 63" L x 36" W x 76" H
Column Dia: 8-1/4"
Base: 57" L x 25-5/8" W x 5-7/8" H
Stroke: 7-7/8"
Table Area: 19-5/8" L x 16" D x 13-3/4" W
Capacity: Drilling, 1-1/2" steel, 2" cast iron; tapping, 3/4" steel, 1" cast iron; boring, 3" steel, 4-1/8" cast iron
|
|
|
Radial Arm Mill & Drill Machine (WT Import) Lot #542 (Sale Order 542 of 1039) Two-speed motor. This machine offers 10 speeds with a high/low switch. Includes drill chuck, arbor and stand.
Product Specifications
Dimensions: 23" x 34" x 45" (without stand)
Swing: 38-5/8"
Spindle: 5" stroke, 3" dia. sleeve
Spindle Distance: Nose to table, max. 23-5/8"
Column Dia: 4-1/2"
Table Area: 22" x 20"
Motor: 1-1/2 hp, 220V, 3-ph.
Headstock Swivel: 180°
Table Travel: 15" R & L
Drilling Capacity: 1-1/2"
Net Weight: Machine: 640 lbs.; stand: 80 lbs.
Spindle Taper: 3MT
Spindle Speed(s): 170-3,000 RPM
|
|
|
16" Scroll Saw with Lamp (Wilton) Lot #543 (Sale Order 543 of 1039) Powerful 1.3-amp permanent magnet motor provides smooth, consistent power during cutting
Variable speed for a variety of materials and thicknesses to be cut
Accepts both pin and plain end blades for convenience
Flexible work light illuminates the cutting area and workpiece
Quick-release knob provides quick, easy tension adjustment and blade changes
Sawdust blower helps keep cutting line clean of dust and easy to see
Die-cast aluminum work table tilts 0 to 45 degrees for level cutting and other intricate cuts
Cast iron base for stability and low vibration
Product Specifications
Net Weight: 35.2 lbs.
Throat Depth: 16"
Cut: 2"
Blade: 5"
Speed(s): Variable (500-1,700 spm)
Stroke: 7/8"
Amp Rating: 1.2
Volts: 120V AC
|
|
|
10" Commercial Table Saw (WT Import) Lot #544 (Sale Order 544 of 1039) Heavy-duty cast iron table with miter gage
Locking, calibrated, gear-driven rip fence
Anti-kickback device
Blade guard with spreader assembly
Blade height adjustment
Positive action rack and worm gear, blade elevation and tilting mechanism outperform and outwear cheap threaded screw and nut arrangements on competitive saws
Adjustable positive stops on table
Adjustable saw blade insert with two blades
Product Specifications
Fence: 2-1/2" x 33-1/2"
Table Size: 27" x 40"
Blade Dia: 10"
Motor: 1-1/2 hp, 1 ph., 110V
Net Weight: 236 lbs.
Max Depth of Cut @ 45°: 2-7/8"
Max Depth of Cut @ 90°: 3-1/8"
Dimensions: 37" H x 27" W x 41" L
Tilt: Blade, 90° to 45°
Table Height: 26-1/2"
Arbor: 5/8"
|
|
|
10" Heavy-Duty Portable Table Saw with Stand (DeWalt) Lot #545 (Sale Order 545 of 1039) Telescoping fence delivers 24-1/2 inch rip capacity without sacrificing portability
Rack and pinion design makes adjustments fast, smooth, and accurate, ensuring fence is always parallel to the blade.
Telescoping rails retract within the saw top for easy portability
15-amp high-torque motor has the power to cut pressure-treated lumber and hardwoods
Heavy-duty internal motor mechanism stabilizes the arbor, which keeps vibration to a minimum.
Dust collection port that easily connects to a vacuum for efficient dust extraction
Includes a 10-inch 24-tooth carbide blade, portable stand (Model DW7440) and miter gauge
Product Specifications
Arbor: 5/8"
Max Rip to the Right of Blade: 24-1/2"
Max Depth of Cut @ 90°: 3-1/8"
Blade Dia: 10"
Max Depth of Cut @ 45°: 2-1/4"
Net Weight: 64 lbs.
Amp Rating: 15
Dust Port: 2-1/4"
Width: Dado, 13/16" max.
Max Rip to the Left of Blade: 15-1/2"
RPM: 3,650 no load
|
|
|
10" Industrial Production Table Saw (WT Import) Lot #546 (Sale Order 546 of 1039) Ground steel table
Miter gage
Locking, calibrated, gear-driven rip fence
Anti-kickback device
Blade guard with spreader assembly
Blade height adjustment
Adjustable saw blade insert
Motor and base enclosed in rugged steel stand
Complete with blade
4-inch diameter rear exhaust outlet easily adapted to dust collectors
Product Specifications
Table Size: 36" x 27"
Blade Speeds: 4,200 rpm
Table Height: 34-1/2"
Net Weight: 364 lbs.
Max Depth of Cut @ 90°: 3"
Motor: 3 hp, 220V, 1 ph.
Dimensions: 39" L x 30" W x 38.5" H
Blade Dia: 10"
Fence: 2-3/4" x 33-1/2"
Max Depth of Cut @ 45°: 2"
Tilt: 90-45° blade tilt
Arbor: 5/8"
|
|
|
10" ProShop 1-3/4 HP Table Saw (JET) Lot #547 (Sale Order 547 of 1039) Exclusive 30-inch ProShop® fence system with T-square design
Integrated arbor lock allows for quick, safe and easy blade changes
Heavy-duty cast iron table with T-style miter slot provides large flat work surface and increased cross-cut capacity
Enclosed cabinet with exclusive leg stand design for easy assembly
4-inch dust port for increased collection efficiency
Rigid left tilting cast iron trunnion
Cast iron table
Powder coated paint for long-lasting, chip-resistant finish
Steel extension wings for additional workpiece support
Product Specifications
Table Size: 27" x 20" without wings
Motor: 1-3/4 hp, 1 ph., 115/230V, 115V prewired
Blade Dia: 10"
Table Height: 34-3/4"
Max Rip to the Left of Blade: 12"
Dust Port: 4" dia.
Max Depth of Cut: 3-1/8"
Max Depth of Cut @ 45°: 2-1/8"
Arbor: 5/8" dia.; 3,600 rpm
Max Rip to the Right of Blade: 30"
|
|
|
10" Standard Table Saw (WT Import) Lot #548 (Sale Order 548 of 1039) Locking, calibrated, gear-driven rip fence
Anti-kickback device
Blade guard with spreader assembly
Blade height adjustment
Positive action rack and worm gear, blade elevation and tilting mechanism
Adjustable positive stops on table
Includes miter gage and one blade
Product Specifications
Motor: 1-1/2HP, 1 ph., 110V
Table Size: 20-1/8" x 27"
Tilt: Blade, 90° to 45°
Blade Dia: 10"
Arbor: 5/8"
Net Weight: 265
Max Depth of Cut @ 90°: 2-3/4"
Max Depth of Cut @ 45°: 1-3/4"
Dimensions: 37" H x 27" W x 41" L
Table Height: 36-1/2"
|
|
|
Deluxe 10" Table Saw (WT Import) Lot #549 (Sale Order 549 of 1039) With 3/4-horsepower motor (develops over 1.5-horsepower output)
Large cutting capacity; uses arbor blades
Saw blades are easily adjusted between 90 and 45 degrees
Includes miter gage and see-through blade guide
Reinforced durable aluminum work table
Adjustable rip fence
Durable and lightweight
Anti-kickback safety device
Includes stand
Product Specifications
Blade Size: 10" x 5/8"
Net Weight: 36-1/2 lbs.
Motor: 3/4 hp
Spindle Speed(s): 5,000 rpm
Capacity: 3-1/8" @ 90°; 2-3/4" @ 45°
Table Size: 26" x 16"
|
|
|
1/3 HP Mini Wood Lathe (WT Import) Lot #550 (Sale Order 550 of 1039) Attachments included are headstock spur center, faceplate, ball bearing tailstock center and tool rest.
Product Specifications
Mount: 3/4-16
Faceplate: 2", 5-3/4"
Spindle: 3/4"-16
Tailstock: MT1
Spindle Speed(s): 500-4,000 rpm (variable speed)
Distance Bet. Centers: 12"
Motor: 1/3 hp
Dimensions: 26" L x 5-1/4" W x 10-1/2" H
Net Weight: 45 lbs.
Turning: 6" dia.
|
|
|
12 x 36 Wood Turning Lathe (WT Import) Lot #551 (Sale Order 551 of 1039) Powerful TEFC motor
Easy speed changes
Turn headstock 45, 90 and 180 degrees for bowl turning
Sold headstock and bed construction
12-inch cast iron offset too rest
6-inch faceplate, spur and ball bearing live center are included
Stand also included with purchase
Product Specifications
Swing Over Bed: 12"
Spindle Speed(s): 600-2,400 rpm
Motor: 3/4 hp
Taper: Head & tailstock, 2MT
Distance Bet. Centers: 34-1/2"
Spindle: 3/4-16
|
|
|
12" x 20" Wood Lathe (JET) Lot #552 (Sale Order 552 of 1039)
Heavy-duty cast iron lathe bed adds stability while limiting vibration during operation
Indexing mechanism allows fast, efficient fluting and veining operations
Headstock swivels 360 degrees, with positive stops at 45 and 90 degrees, and may be positioned anywhere along the bedways for maximum flexibility and user comfort
Live center has a removable pin for boring through stock
Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools
Hollow tailstock allows for long hole boring for lamps and other vessels
Convenient work light for better lighting right on the workpiece
Five-year warranty
Product Specifications
Swing Over: 12" bed; 9-1/2" tool rest base
Spindle Taper: MT-2
Warranty: 5 years
Hole Through Tailstock: 3/8"
Tailstock Taper: MT-2
Hole Through Spindle: 3/8"
Spindle Nose: 1" x 8 TPI
Headstock Taper: MT-2
Distance Bet. Centers: 20"
Motor: 3/4 hp, 1-ph., 115 V/11 amp; 115 V prewired
Net Weight: 98.3 lbs.
Dimensions: 15-1/2" H x 12" W x 32" L
Ram Travel: 2"
Speed(s): (6) 500 to 3,900 rpm
|
|
|
12" x 35" Wood Lathe with Stand (WT Import) Lot #553 (Sale Order 553 of 1039) Spindle: 1" - 10
Motor: 3/4 hp, 110V 60 Hz
Speed(s): 10
RPM: 720 - 2,500
Swing: 12"
Tailstock: 2.24" through travel
Headstock: 2MT
Tailstock: 2MT
Dimensions: 60" x 15" x 45-1/2"
Net Weight: 190 lbs.
Distance Bet. Centers: 33-1/2"
|
|
|
13" x 39" Wood Copy Lathe with Stand (WT Import) Lot #554 (Sale Order 554 of 1039) Tailstock: 2MT
Spindle: 1-1/8" - 12
Center Height: 6.9"
Length: 39" working
Swing: 13"
RPM: 890, 1,650, 2,500
Speed(s): 3
Table Size: 6" x 9" sanding table
Dimensions: 54" x 18" x 47"
Motor: 3/4 hp, 110V 60 Hz
Net Weight: 169 lbs.
Disc Diameter: 8"
|
|
|
14" x 42" VS Pro Wood Lathe with Legs (JET) Lot #555 (Sale Order 555 of 1039) This midrange lathe offers mechanical variable speed, along with a headstock that pivots as well as slides to the end of the bed for outboard turning capabilities.
Heavy-duty cast iron bed adds stability while limiting vibration during operation
Indexing mechanism enables fast, efficient fluting and veining operations; spindle has positive locking indexing in 10-degree increments
Reeves pulley drive system allows quick variable speed changes from 450 to 3,000 rpm
Headstock swivels 360 degrees, with positive stops at 45 and 90 degrees, and may be positioned anywhere along the bedways for maximum flexibility and user comfort
Built-in spindle locks for easy removal of faceplates and chucks
Cam-lock mechanisms for adjustments of headstock, tailstock and tool rest base without using tools
Hollow tailstock for performing long-hole boring for lamps and other vessels
Special cast-in webbings in legs accept 2-by-4's or a 2-by-12 to construct a solid tool or a sandbag shelf
Five-year warranty
ISO certified
Product Specifications
Headstock Taper: MT2
Centerline Spindle to Floor: 43-1/2"
Headstock Swivel: Pivot 360° and slide
Ram Travel: 4"
Hole Through Tailstock: 3/8"
Tailstock Taper: MT-2
Spindle Nose: 1" x 8 TPI
Speed(s): (8) 450-3,000 rpm
Style: Leg stand
Swing Over: bed, 14"; tool rest base 10"
Motor: 1 hp, 1 ph., 115/230V, 115V prewired, 7.4/3.7 amps
Net Weight: 190 lbs.
Distance Bet. Centers: 42"
Indexing Positions: 36
|
|
|
2/5 HP Mini Wood Lathe (Wilton) Lot #556 (Sale Order 556 of 1039) Features and benefits: powerful 3/5HP motor quickly removes material. Variable speed control with current feedback maintains constant speed under load. All cast iron bed and headback provides stability and extreme durability. Lock-off switch with removable key. Includes spur center, adjustable tool rest, 6" and 2-1/2" faceplates. 6" tool rest.
Product Specifications
Net Weight: 40 lbs.
Swing: 8" over bed
Spindle Speed(s): 750 to 3200 RPM (variable)
Distance Bet. Centers: 12"
Motor: 2/5 HP, 120V AC, 2.3 amps
|
|
|
7" Wet Tile Cutter (WT Import) Lot #557 (Sale Order 557 of 1039) This tile cutter is developed for sawing small to medium size tiles. Table adjusts 45 degrees. Diamond blade is water-cooled. Includes blade and water trap.
Product Specifications
Blade Size: 7" x 1" arbor
Table Tilt: 45°
Dimensions: 15-1/4" x 15-1/2" worktop
RPM: 3,600 no load
Net Weight: 25 lbs.
Cut: 1-5/16"
Motor: 1/2 hp, 1 phase, 120V, 60 Hz, 3.75 amps
Capacity: 1-3/8" max. ht.
|
|
|
Deluxe Combination Rotary Machine (WT Import) Lot #558 (Sale Order 558 of 1039) Machine includes five sets of rolls for wiring, crimping, ogee bead, single bead and elbow edging. It performs numerous operations by merely changing the rolls.
The throat and arbors are designed to utilize crimping and beading rolls. Machine may be operated from left to right, both with clockwise handle rotation. Portable setup right at the jobsite with the included clamp-on base.
Product Specifications
Capacity: 22 gauge
Net Weight: 55 lbs.
Throat Depth: 7"
Distance Bet. Centers: 2"
|
|
|
Mini Sheet Metal Cutter (WT Import) Lot #559 (Sale Order 559 of 1039) For use on mild steel. Adjustable rollers can be used for straight or curved cuts. Can be mounted to work bench or held in a vise.
Product Specifications
Capacity: 16 ga. mild steel
Handle: 11"
Throat: 2"
Height: 4-3/4" (without handle)
Base: 3" x 2-1/2" w/2 mounting holes
|
|
|
Planetary Ring Roller (WT Import) Lot #560 (Sale Order 560 of 1039) Unlimited ring size range.
Product Specifications
Net Weight: 13-1/4 lbs.
Handle: 13-1/2" L
Capacity: 1/4" round steel; 1" x 3/16" flat steel
|
|
|
Plate Cutter (WT Import) Lot #561 (Sale Order 561 of 1039) For cutting round and straight sheet metal. Will cut up to 18-gauge sheet metal. Accessories include attaching fence and 1/2-inch female ratchet with cheater bar.
Product Specifications
Mount: Four 7/16" base holes
Capacity: 18 gauge
Dimensions: With fence, 17-1/4" W x 8-1/2" x 12-1/2" H
Base: 7" W x 8" D
Net Weight: 45 lbs.
|
|
|
Rebar Cutter (WT Import) Lot #562 (Sale Order 562 of 1039) Base: 12-3/4" x 6"
Net Weight: 80 lbs.
Capacity: 5/8" dia. rebar; max 90° bend
|
|
|
Rotary Machine (Tennsmith) Lot #563 (Sale Order 563 of 1039) The Tennsmith Model R22 rotary machine with interchangeable rolls is a versatile forming tool for the manual performance of numerous sheet metal operations. Tool features a solid cast, an enclosed frame and smooth meshing machine gears.
Material can be fed through the rolls in either direction by selecting the proper arbor. The crank on top of the frame controls the rolls' forming pressure. Unit includes hand crank, spanner, bench stand and rolls of the following types: 1/8-inch turning, burring, wiring, crimping and 3/4-inch ogee bending.
Product Specifications
Distance: Shaft to center, 2"
Capacity Mild Steel: 22 gauge max.
Throat: 7"
|
|
|
Sheet Metal Seaming Machine (WT Import) Lot #564 (Sale Order 564 of 1039) All-steel forming head
Hardened and ground shafts
Case hardened steel forming tools
Machine cut gears
Needle type roller bearings throughout
Stand made of arc-welded steel heavy top plate
Blue finish
Alemite tilting on central lubrication panel
Pocket depth -- 5/16 inch width of hammer-over edge, adjustable up to 3/8 inch
V-belt drive
Product Specifications
Dimensions: 36" L x 16.5" W x 36.5" H
Capacity: 1" of material (20-26 ga.)
Speed(s): 25' per minute
Motor: 3/4 HP, 1 phase, 110V, 60 Hz
RPM: 1,800
|
|
|
11" x 26" Lathe With Stand (WT Import) Lot #565 (Sale Order 565 of 1039) Lathe stand
5-inch three-jaw chuck
6-inch four-jaw chuck
8-inch faceplate
Steady and follow rests
Two lathe centers
Oil bottle, toolbox and manual
Four-way tool post
Product Specifications
Spindle Speed(s): 150-2,400 rpm
Bed: 46" L x 6" W x 8" H
Tailstock: 2-1/2" travel, 1-1/4" dia., 2MT taper
Motor: 1 hp, 110V 1 ph.
Distance Bet. Centers: 26"
Spindle Taper: MT4
Compound Travel: 3-1/4" max.
Thread: 32 inch (8-72 TPI), 18 metric (0.25-3.5 mm)
Spindle Hole: 1"
Longitudinal Feed: 9 (0.0025" - 0.013" rev.)
Swing Over Bed: 11"
Cross Slide Travel: 5-1/2" max.
Rests: Steady & follow, 1/4"-2"
Swing Over Cross Slide: 7"
Tool Size: Max. 1/2" x 1/2"
|
|
|
12" x 36" Gear Head Precision Bench Lathe Lot #566 (Sale Order 566 of 1039) Standard features: 6-inch three-jaw chuck, 8-inch four-jaw chuck, 2MT live center, 2 and 3 MT dead centers, center sleeve, toolbox, steady and follow rests, thread change gears, 8-inch face plate, four-way turret and 1/2-inch drill chuck.
Product Specifications
Compound Travel: 3-1/4" slide
Swing: 12" over bed; 7" over cross slide
Thread: 40 different ways (4-112 TPI); metric, 29 kinds, 2-4.5
Hole Size: 1-3/8"
Bed: 47" L x 7-5/32" W
Motor: 1 hp, 110V AC, mag. switch, 1 ph.
Spindle: D1-4
Rod Dia: 3/4"
Distance Bet. Centers: 36"
Tailstock: 4" spindle travel
Saddle: 33" travel
Spindle Taper: 5MT
Spindle Speed(s): 70-1,400 rpm
Net Weight: 850 lbs.
MT: 3MT
Screw Dia: 7/8" (8 TPI)
Cross Slide Travel: 5-7/8"
|
|
|
13" x 40" Gap Bed Geared Head Lathe (WT Import) Lot #567 (Sale Order 567 of 1039) Precision ground and hardened bedways
Spindled supported with precision roller bearings
Headstock gears made of hardened, ground, high-quality steel
Easy operating speed changing levers
Removable gap provided for larger diameter work
Easy operating gearbox has various feeds and thread cutting functions
ASA D1-4 cam lock spindle nose
Standard features:
5MT to 3MT adapter
3MT dead centers (two)
6-inch three-jaw chuck
8-inch four-jaw chuck
12-inch faceplate
Six metric change gears
Steady and follow rests
Toolbox with tools
Oil gun
Notes: Use of static phase converter will void warranty. Leasing available.
Product Specifications
Bed: 7-3/8" W x 11-13/32" H x 54" L
Center Height: 6-1/2"
Motor: 2 hp, single-phase
Swing: 13" over bed; 18" over gap
Tailstock: 1-1/4" quill dia.
Thread: 4-112 TPI (40 kinds)
Cross Feeds: English: 0.0004"-0.0106". rev. (40 kinds); Metric: 0.100 - 0.268mm/rev. (40 kinds)
Spindle Speed(s): (8) 70-2,000 RPM
Taper Shank: 5MT
Longitudinal Feed: English: 0.0011" - 0.0311" rev. (40 kinds); Metric: 0.028 - 0.791mm/rev. (40 kinds)
Spindle Hole: 1-3/8"
|
|
|
14" x 40" Deluxe 2 HP Gap Bed Lathes (WT Import) Lot #568 (Sale Order 568 of 1039) Precision ground and hardened bed ways
Spindle supported with precision roller bearings
Head stock gears are high quality hardened and ground steel
Easy operating speed change levers
Removable gap provided for larger diameter work
Easily operated gearbox has various feeds and thread cutting function
ASA D1-4 camlock spindle nose
Accessories:
5MT to 3MT adapters
3MT dead and alloy centers
6-inch three-jaw chuck
8-inch D1-4 back plate
12-inch face plate
Four metric (1.25) change gears
Steady rest and follow rest
Toolbox with tools and oil gun
Product Specifications
Includes: Taper attachment for up to 7"
Metric: 35-4.5 (22 kinds)
Gap Length: 9"
Swing: 14" over bed; 18-3/4" over gap
Cross Travel: 7"
Compound Travel: 4"
Net Weight: 1,200 lbs.
Bed: 8" W x 11-31/32" H x 53-1/4" L
Motor: 2 hp, 3 ph.
Center Height: 6-1/2"
Spindle Hole: 1-1/2"
Tailstock: 1-1/4" quill dia.
Quill Travel: 4" (3MT taper)
Spindle Speed(s): (8) 50-1,500 RPM
|
|
|
16 x 40 Geared Head Gap Bed Engine Lathe (WT Import) Lot #569 (Sale Order 569 of 1039) One-piece cast iron base. This machine is available for lease. Please contact us for more information.
Includes:
10-inch three-jaw chuck
12-inch four-jaw chuck
18-inch face plate
10-inch back plate
Threading dial
Steady and follow rests
Work light
Coolant pump
Foot brake
Splash guard
Chip pan
4 MT center and center sleeve
Product Specifications
Distance Bet. Centers: 40"
Spindle Hole: 3-1/8"
Spindle Nose: D1-8
Spindle Taper: 6MT
Spindle Speed(s): 12 (40-1,600 RPM)
Swing: 16" over bed; 8-3/4" over cross slide; 25-5/8" over gap
Thread: Inch, 60 kinds (2-112 TPI); metric, 41 kinds (0.1-14mm)
Cross Slide Travel: 9" max.
Tailstock Taper: 4MT (5" travel)
Motor: 7-1/2 hp, 220/440V, 3 ph.
Net Weight: 5,200 lbs.
Cross Feeds: 60" (0.0012"-0.0672"/rev. longitudinal; 0.0005-0.0288"/rev. cross)
|
|
|
16" x 40" Geared Head Gap Bed Engine Lathe (WT Import) Lot #570 (Sale Order 570 of 1039) With taper attachment. A heavy-duty geared head gap bed engine lathe that can perform various turning operations, as well as boring, drilling, grooving, turning metric and inch threads, and other operations.
Includes the following:
10-inch three-jaw chuck
12-inch four-jaw chuck
Face plate
Steady and follow rests
Double row cylindrical roller bearing angular contact ball bearing
Four-way tool post type with 4-3/4 inch maximum compound slide travel
Product Specifications
Spindle Nose: D1-8
Tailstock: 5" spindle travel; 2-3/4" dia.
Dimensions: 100" L x 45" W x 47" H
Motor: 7-1/2 hp, 230V, 3 ph., 60 Hz
Net Weight: 4,950 lbs.
Hole Through Spindle: 3-1/8"
Thread: Inch, 2-112 TPI; 41 metric (0.1 to 14 mm)
Swing: 16" over bed; 8.75" over cross slide; 12.6" over gap
Cross Slide Travel: 9" max.
Spindle Taper: 6MT (4MT tailstock spindle taper)
Spindle Speed(s): 12 (40-1,600 rpm)
Longitudinal Feed: 0.0012"-0.0672"/rev.
Cross Feeds: 60 (0.0005"-0.0288"/rev.)
Distance Bet. Centers: 40"
|
|
|
16" x 40" Tool Room Lathe (WT Import) Lot #571 (Sale Order 571 of 1039) 8-inch three-jaw chuck and adapter
12-inch four-jaw independent chuck and adapter
12-inch face plates
Steady and follow rests
Thread chasing dial
MT 6/2 sleeve and MT 4 center
Oil gun, one set of wrenches and operating manual
Cross adjustment, ± 1/2 inch
Product Specifications
Dimensions: 76-1/2 x 33-1/2 x 52"
Cross Slide Travel: 8-1/4"
Center Height: 20.5"
Coolant System: Pump: 1/8 - 3 hp
Spindle Speed(s): 16 changes, 45-1,800 r/min
Spindle Taper: 6MT
Spindle Nose: D1-6
Distance Bet. Centers: 40"
Longitudinal Feed: 0.002" - 0.067"/rev
Thread: Metric, 39 kinds (0.2-14 mm); inch range, 45 kinds (2-72 TPI)
Spindle Bore: 2"
Motor: 3 & 5 hp, 2 speed, 220V, 3-ph.
Swing: 16" over bed; 10" over cross slide; 23" over gap
Tailstock: 2" dia. sleeve; 4MT taper
Bed: 10" W
Gap Length: 10"
Compound Travel: 4" rest
Pitch: Lead screw, 4 TPI; diametrical range, 21 kinds (8-44 DP); module range, 18 kinds (0.3 - 3.5 MP)
|
|
|
16" x 60" Geared Head, Precision Engine Lathe (WT Import) Lot #572 (Sale Order 572 of 1039) 10-inch three-jaw chuck
16-inch four-jaw chuck
Back plate
Threading dial
Steady and follow rests
Work light
Coolant pump
Foot brake
Splash guard
Chip pan
4MT center and center sleeve
Product Specifications
Cross Feeds: 0.0005-0.0288"/rev
Cross Slide Travel: 9" max.
Compound Travel: 60"
Distance Bet. Centers: 60"
Longitudinal Feed: 0.0012-0.0672"/rev
Motor: 7-1/2 hp, 220/440V, 3 ph.
Spindle Speed(s): 12 (40 - 1,600)
Swing: 16" over bed; 8-3/4" over cross slide; 25-5/8" over gap
Tailstock: 5" spindle travel; 4MT taper
Spindle Nose: D1-8
Thread: Inch: 60 kinds (2-112 TPI); Metric: 41 kinds (0.1 - 14mm)
Spindle Taper: 6MT
Spindle Hole: 3-1/8"
Net Weight: 5,700 lbs.
|
|
|
16" x 60" Precision Engine Lathe (WT Import) Lot #573 (Sale Order 573 of 1039) Taper attachment
Quick change tool post
10-inch three-jaw chuck
12-inch four-jaw chuck
Steady and follow rests
Work light
Foot brake
Chip pan
4MT center and center sleeve
Treading dial
Face and back plates
Splash guard
Toolbox
Coolant system
Product Specifications
Distance Bet. Centers: 60"
Spindle Taper: 6MT
Spindle Speed(s): 16 (42-2,000)
Spindle Hole: D1-6
Net Weight: 4,620 lbs.
Longitudinal Feed: 55" (0.0012-0.0352 in./rev.)
Tailstock: 4MT
Cross Slide Travel: 9"
Motor: 7 hp, 220/440V, 3 ph.
Thread: Inch, 40 kinds (2-56 TPI); metric, 53 kinds (0.04-14mm)
Cross Feeds: 55" (0.0006-0.0126 in./rev.)
Swing: 16" over bed; 9-7/16" over cross slide; 23-7/16" over gap
|
|
|
18" x 60" Big Bore Lathe with Taper Attachment Lot #574 (Sale Order 574 of 1039) Lathe includes 10-inch three-jaw chuck, 12-inch four-jaw chuck, D1-8 cam lock spindle, back plate for four-jaw, face plate, steady and follow rests, halogen lamp, four-way turret tool post, bed stop, V-way, coolant pump, splash guard, foot brake and thread dial.
Product Specifications
Cross Feeds: 0.0013"-0.035"
Longitudinal Feed: 0.0027"-0.15"
Swing Over: Bed: 18"; cross slide: 11.2"; gap: 27.4"
Cross Slide Travel: 330 mm (13") max.
Motor: 7.5 hp, 3-phase, 230/460V
Distance Bet. Centers: 60"
Bore: 3-1/8" spindle bore
Spindle Nose: D1-8
Spindle Taper: 5MT
Spindle Speed(s): 15 (22-1,800 rpm)
Thread: 66 metric: 0.5-28 mm; 66 inch: 1-56 TPI
Travel: 120 mm (4.7") tailstock spindle
|
|
|
21" x 80" Precision Gap Bed Gear Head Lathe (WT Import) Lot #575 (Sale Order 575 of 1039) 16-inch, four-jaw chuck
12-inch three-jaw scroll chuck
20-inch faceplate
Center turning driver
Steady and follow rests
4 MT carbide tipped center
5 MT steel center
Oil pan
Toolbox with wrenches and spanners
Instruction book
Spare parts list
Product Specifications
Spindle Nose: D1-8
Net Weight: 6,327 lbs.
Distance Bet. Centers: 80"
Thread: Inch: 40 (4-56 TPI); Metric: 23 (0.5 - 7mm)
Tailstock: 4MT
Swing: 21" over bed; 13-7/16" over cross slide; 28-7/16" over gap
Spindle Travel: 6-5/16"
Motor: 10 hp, 220/440V, 3-ph.
Longitudinal Feed: 0.0023 - 0.035"/rev.
Cross Feeds: 80" (range: 0.0012 - 0.075"/rev.)
Spindle Speed(s): (12) 25-1,500 RPM
Spindle Taper: 4MT
Cross Slide Travel: 10-5/8" max
|
|
|
9" x 20" Bench Lathe (WT Import) Lot #576 (Sale Order 576 of 1039) Six speeds
Reversing switch
36 English and 11 metric threads
Inch and metric dial
Includes face plate, steady rest, four-way tool post, MT2 dead center, 4-inch three-jaw chuck and 7-inch four-jaw chuck
Product Specifications
Thread: 8-56 TPI (inch), .05-3 mm (metric)
Bed: 4-1/2" W x 29" L
Spindle Speed(s): 6 (130-2,000 RPM)
Taper: 2MT
Swing: 9" over bed; 5-1/4" over cross slide
Spindle Taper: 3MT
Spindle Bore: 13/16"
Distance Bet. Centers: 20"
Compound Travel: 2"
Cross Slide Travel: 4"
Motor: 3/4 hp, 60 Hz
|
|
|
Belt Drive Bench Hobby Lathe with Stand (JET) Lot #577 (Sale Order 577 of 1039) Spindle supported by precision tapered roller bearings
Hardened and ground bedways
Power longitudinal feed allows threading
Standard 1-1/2-inch by 8 TPI spindle nose allows for many aftermarket accessories
Reversing switch is included for added versatility
Backlash adjustments are provided throughout the carriage
Tailstock can be adjusted for taper cuts
Quick-change gearbox provides a wide range of inch and metric threads
Standard equipment:
All-metal stand with front compartment is included in this package!
7-inch four-jaw and 4-inch three-jaw chuck with threaded back plate
Faceplate and threading dial
Four-way tool post
Single tool post
Steady and follow rests
Metric change gears
Centers
Toolbox and tools
Product Specifications
Swing Over Cross Slide: 5-1/4"
Swing Over Bed: 8-3/4"
Net Weight: 235 lbs.
Distance Bet. Centers: 20"
Hole Through Spindle: 25/32"
Spindle Mount: 1-1/2" x 8 TPI
Spindle Taper: MT3
Spindle Speed(s): 6 (130-2,000 rpm)
Longitudinal Feed: 27 (0.005"-0.011" rev.)
Inch: 27 threads (8-56)
Metric: 11 threads (0.5-3 mm)
Motor: 3/4 hp, 1 ph., 115V only
Compound Travel: 1-7/8"
Cross Slide Travel: 5"
Carriage Travel: 16"
Tailstock: MT2 taper; 1-9/16" spindle travel
Steady Rest: 1-7/8"
Follow Rest: 1-7/8"
Bed: 4-7/8" W
Dimensions: With stand, 37-1/2" L x 20" W x 45" H
Tool Size: 1/2" x 1/2" max.
|
|
|
Belt Drive Hobby Bench Lathe (JET) Lot #578 (Sale Order 578 of 1039) Spindle is supported by precision tapered roller bearings
Hardened and ground bedways
Power longitudinal feed allows threading
Standard 1-1/2-inch by 8 TPI spindle nose allows for many aftermarket accessories
Reversing switch is included for added versatility
Backlash adjustments are provided throughout the carriage
Tailstock can be adjusted for taper cuts
Quick-change gearbox provides a wide range of inch and metric threads
Note: Stand shown is optional equipment; its order no. is 2005-0031.
Standard equipment:
7-inch four-jaw and 4-inch three-jaw chuck with threaded back plate
Faceplate and threading dial
Four-way tool post
Single tool post
Steady and follow rests
Metric change gears
Centers
Toolbox and tools
Product Specifications
Number of Longitudinal Feed: 27
Swing: Over bed, 8-3/4 in; over cross slide, 5-1/4 in.
Spindle Taper: MT3
Spindle Mount: 1-1/2 in. x 8 TPI
Hole Through Spindle: 25/32 in.
Distance Bet. Centers: 20 in.
Spindle Speed(s): 6 (130-2,000 rpm)
Compound Travel: 1-7/8 in.
Cross Slide Travel: 5 in.
Tailstock: 1-9/16 in.
Motor: 3/4 hp, 1 ph., 115V only
Net Weight: 235 lbs.
Longitudinal Feed: .005 -.001 in../rev.
Thread: Inch, 27 (8-56 TPI); metric, 11 (0.5-3 mm)
Tailstock Taper: MT2
|
|
|
Geared Head Bench Lathe (JET) Lot #579 (Sale Order 579 of 1039) Hardened and ground gears in headstock and gearbox
D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings
Headstock constantly oiled during operation
Gearbox gives wide inch threading and feed capabilities with no gear change
V-way bed design is induction hardened and ground
Gap bed section provided for larger diameter work
Independent lead screw and feed rod Spindle actuation control is apron mounted Compound and cross slide with backlash elimination Adjustable gibs incorporated in the carriage and slideways
Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
Tolerance test certificate included
Product Specifications
Capacity: Steady rest, 2-5/8"; follow rest, 2-3/4"
Spindle: D1-4
Tool Size: 5/8" x 5/8" max.
Travel: Carriage, 35"
Net Weight: 1,015 lbs.
Swing: 13" over bed; 7-25/32" over cross slide; 18-3/4" over gap
Spindle Travel: 3-3/4"
Distance Bet. Centers: 40"
Spindle Taper: MT5 (MT3 with sleeve)
Spindle Hole: 1-3/8"
Spindle Speed(s): 8 (70-2,000 RPM)
Motor: 2 hp, 1 ph, 230V only
Bed: 7-3/8" W
Compound Travel: 6-5/16"
Cross Feeds: 0.0012"-0.0345"
Longitudinal Feed: 40 (0.0036"-0.0325")
Dimensions: 71" L x 32" W x 47" H (with stand)
Thread: Inch, 40 (4-112 TPI); metric, 27 (0.2-6 mm)
Warranty: 1 year (additional warranty available)
|
|
|
Geared Head Engine Lathe (JET) Lot #580 (Sale Order 580 of 1039) Hardened and ground gears featured in headstock and gearbox
Dl-4 spindle precision ground for accuracy and supported by high-quality tapered roller bearings
Headstock constantly oiled during operation
Splined, not keyed, shafts utilized in headstock
Gearbox gives large threading and feed capabilities with no gear changes
V-way bed design is induction hardened and ground
Gap bed section provided for larger diameter work
Independent lead screw and feed rod
Spindle actuation control apron mounted
Inch-metric dials are standard
Compound and cross slide have backlash elimination
Adjustable gibs incorporated in carriage and slideways
Tailstock may be offset for turning tapers and includes inch-metric graduated quill.
Tolerance test certificate included
Standard equipment also includes one 6-inch three-jaw direct mount chuck with top reversing jaws; one 8-inch four-jaw chuck; one 12-inch faceplate; one four-way tool post; and steady and follow rest.
Also included: micro-carriage bed stop, front removable chip tray, spindle jog button, foot brake, coolant system with splash guard, metric change gears, halogen work lamp, centers and headstock center sleeve, threading dial and toolbox with tools.
Product Specifications
Motor: 3 hp, 3-phase, 230/460V; prewired 230V
Spindle: 1-1/2" bore
Spindle Speed(s): 12 (40-1,800 rpm)
Tailstock: 4-3/4" travel
Tool Size: 5/8" x 5/8"
Capacity: Steady rest, 3-3/4"; follow rest, 2-3/4"
Dimensions: 73-3/4" L x 29-1/2" W x 47-1/2" H
Longitudinal Feed: 0.0012"-0.0294" rev.
Travel: Carriage, 37-1/2"
Compound Travel: 3-1/2" max.
Feed Type: 40 long. & cross
Cross Feeds: 0.0003"-0.0103" rev.
Swing: 13" over bed; 7-1/2" over cross slide; 19" through gap
Net Weight: 2,081 lbs.
Cross Slide Travel: 6-3/8"
Distance Bet. Centers: 40"
Spindle Taper: 5MT (3MT w/sleeve)
Mount: DW spindle
Bed: 10-1/2"W
Thread: Inch, 40 (4-112 TPI); metric, 22 (0.45-7.5 mm)
|
|
|
Hobby Lathe (JET) Lot #581 (Sale Order 581 of 1039) Lathe features are variable speed, overload protection, inside lead screw, three-jaw chuck and MT1 dead center. Machine also comes with wrench set and oil can.
Product Specifications
Spindle Bore: 1/3"
Net Weight: 50 lbs.
Motor: 150W
Cross Slide Travel: 2"
Spindle Mount: MT2
Spindle Speed(s): 100-2,000 rpm
Distance Bet. Centers: 9-3/4"
Swing Over Bed: 5-1/2"
Dimensions: 8-1/2" H x 11-3/4" W x 24" L
|
|
|
Large Spindle Bore Lathe ZX Series (JET) Lot #582 (Sale Order 582 of 1039) ISO 9001 certified manufacturer
3-1/8 inch bore spindle is supported by two tapered and one ball bearing
Chrome molydenum headstock gears are hardened, ground and shaved
Universal gearbox allows inch, metric, diametral and module pitch threads
No change gears required
Carriage features one-shot lubrication and Turcite B on bed sliding surfaces
T-slotted compound slide featuring a four-way tool post
One-piece cast iron base absorbs vibration, allowing heavier cuts
High quality ANSI Class 50 wear-resistant cast iron bedways are hardened and ground.
Five-position auto carriage stop
Tolerance test certificate included
Standard equipment includes 10-inch three-jaw chuck with top reversing jaws; 12-inch four-jaw chuck; 12-inch faceplate; and four-way tool post; coolant system with splash guard; large, easy to use foot brake; and articulating halogen work lamp.
Additional standard equipment is follow rest; large capacity steady rest; centrally located controls with jog button; threading dial; mounting pads and levelers; spindle sleeve (MT7 to MT5); dead center; live center; toolbox and adjusting tools.
Note: Rotary phase converter must be 10 horsepower or higher with high torque kit. Use of static phase converter will void warranty.
Product Specifications
Spindle Travel: 5"
Distance Bet. Centers: 60"
Thread: Inch, 61 (1-5/8 - 72); Metric, 24 (0.05-20mm)
Gap Length: 12-1/4"
Swing: 18" over bed; 11 in. through cross slide; 27-1/2 through gap
Tailstock: 5MT
Spindle Taper: MT7 (MT5 w/sleeve)
Bed: 13-3/8"
Rests: Steady, 3/8"-7"; follow, 1/2" - 3-1/2"
Spindle Speed(s): 12 (25-1,800 rpm)
Spindle Hole: 3-1/8"
Cross Feeds: 0.0006"-0.0365"
Net Weight: 6,245 lbs.
Motor: 7-1/2HP; 3 ph., 230/460V prewired 230V
Longitudinal Feed: 0.0015"-0.0913"
Dimensions: 116-1/2" L x 40" W x 48-7/8" H
Compound Travel: 5-1/8"
Cross Slide Travel: 9"
|
|
|
Precision Bench Lathes (WT Import) Lot #583 (Sale Order 583 of 1039) Features one each 6-inch three-jaw and four-jaw chucks; MT2 live center; MT2 and MT3 dead centers; center sleeve; toolbox; steady and follow rests; thread change gears; 8-inch faceplate; four-way turret; and 1/2-inch drill chuck.
Product Specifications
Net Weight: 980 lbs.
Motor: 1 hp, 1 ph., 120V AC, 60 Hz, mag switch
Size: 12" x 36"
Screw Dia: 7/8" lead screw (8 TPI)
Spindle: 2-1/4 - 8 TPI
Swing Over Bed: 12"
Swing Over Cross Slide: 7"
Distance Bet. Centers: 36"
Tailstock: MT3, 4" spindle travel
Thread: 4-112 TPI
Bed: 47" L x 7-5/32" W
Spindle Speed(s): 50-1200 RPM
Spindle Bore: MT5
Rod Dia: 3/4"
Saddle: 33" travel
Hole Through Spindle: 1-3/8"
Cross Slide Travel: 5-7/8"
Travel: Tool, 2-1/2"
|
|
|
Precision Mini Table Lathe (WT Import) Lot #584 (Sale Order 584 of 1039) Use for drilling, boring, taper cutting, threading, cylinder turning and counterfacing
3-inch three-jaw chuck
Automatic feed cutting
Spindle travel tailstock
UL approved
Product Specifications
RPM: 200-2,900
Distance Bet. Centers: 10"
Bore: 13/16
Taper: Bore, MT3; center, MT2
Size: Max. cutting tool, 5/8"
TPI: 12-52
Compound Travel: 2"
Bed: 3-1/4" face width, 15-3/4" length
Screw Size: Lead, 5/8" x 16 TPI
Motor: 1/2 hp
Swing Over: Bed, 7"; cross slide, 4"
Cross Slide Travel: 3"
|
|
|
10" x 16" Horizontal Bandsaws (Wellsaw) Lot #585 (Sale Order 585 of 1039) Combination carbide guides with rollers
Four-speed V-belt drive
Manual Rite-Tension® band tensioning
Wet cutting system; blade brush
110 volts at controls and magnetic starter
Coolant system capacity of 8 gallons and a 115-volt AC submersible pump
Blade drive, 2 horsepower, 208/230/460 volts, 60 Hz, three-phase
Under voltage and overload protection
Precision ground bed
Quick acting manual screw vise; swivels to 45 degrees
Feed control to 45 degrees
Adjustable blade feed
Positive frame lock, stock stop assembly
Auto shutoff at completion of cut
Carbide blade guards with rollers and Tiger-Tooth® bimetal blade
Coolant for initial startup
Options include variable feed rate control, infinitely variable speed drive, set of four casters (two locking), JIC electronics, totally enclosed motor, work light, stock stand and 10-foot non-powered roller conveyor
Available in single- or three-phase
Product Specifications
Blade Size: 1" x .035" x 11 ft. 6 in.
Net Weight: 950 lbs.
Floor Area: 30" x 84"
Wheel Dia: 15"
Bed: 29" H
Feed Type: Adj. gravity
Vise Swivel: To 45°
Vise: Manual screw control
Blade Speeds: 50, 100, 175, 275 fpm
45° Angle Capacity: 10" H x 9" W
Rectangular Capacity: 10" H x 16" W
Flat Capacity: 16"
Circular Capacity: 10-1/2"
Motor: 2 hp, 115/230V, 60 Hz, 1 ph.
|
|
|
10" x 18" Metal Cutting Bandsaw (Shop Fox) Lot #586 (Sale Order 586 of 1039) For cutting solid bars, rounds and tubing. This heavy-duty sawing center is built for production work. Its 2-horsepower, 220-volt motor powers through square stock up to 5 by 18 inches, and round stock up to 10 inches, with angle cutting up to 45 degrees, left or right.
The bandsaw includes many features, such as independently adjustable blade guides, quick release vise, coolant pump with nozzle, chip tray, work stop, magnetic safety switch and four blade speeds. This machine makes an outstanding addition to any metal fabricating shop.
Other features:
Centralized control panel located on top of saw bow
Heavy-duty, all steel, one-piece base
With adjustable hydraulic downfeed, just dial the feed rate on the control panel
Worm gear box has hardened and ground gears
Quick-release vise for fast job changes
Miter cutting ability
Blade wheels have heavy-duty ball bearings
Magnetic safety switch
Product Specifications
Motor: 2 hp, 220 V, 1 ph.
Blade Size: 129-3/8" x 1"
Blade Speeds: 114, 196, 388, 377 fpm
Rectangular Capacity @ 0°: 5" X 18"
Circular Capacity @ 0°: 10"
Rectangular Capacity @ 45°: 6" x 7-1/2"
Circular Capacity @ 45°: 6"
Net Weight: 836 lbs.
|
|
|
13" Horizontal Bandsaws (Wellsaw) Lot #587 (Sale Order 587 of 1039) Hydraulic variable feed rate
Combination carbide guides with rollers
Infinitely variable speed drive
Rite-Tension® band tensioning
Wet cutting system
Powered blade brush
110 volts at controls
Totally enclosed motor with magnetic starter
Under voltage and overload protection
Precision ground bed
Top blade loading
Quick acting vise
Stock stop assembly
Auto shutoff at completion of cut
Available options include blade guards and Tiger-Tooth® bimetal blade
Coolant for initial startup (coolant tank capacity for 8 gallons)
Set of four casters (two locking)
NFPA 79 electronics
Work light, stock stand and 5- and 10-foot non-powered roller conveyors
Product Specifications
Blade Size: 1" x .035" x 12' 6"
Floor Area: 40" x 84"
Bed: 29" H; 10-1/2" W
Vise Swivel: 45°
Blade Speeds: 70-375 fpm (infinitely variable)
45° Angle Capacity: 11" x 10"
Rectangular Capacity: 12" x 18"
Flat Capacity: 18"
Circular Capacity: 13"
Motor: 3 hp, 208/230/460V, 60 Hz, 1-ph; 2 hp, 115/230V, 60 Hz, 3 ph.
|
|
|
14" Vertical Bandsaw (Wilton) Lot #588 (Sale Order 588 of 1039) Wilton's 14-inch vertical bandsaw is specifically designed to effectively cut a variety of materials, including wood, plastic, bakelite, composites and ferrous and nonferrous metals.
Versatile and dependable, this premier saw is capable of contour cutting, straight cutting and re-sawing. The saw also can cut delicate curves in both thick or thin stock.
Standard equipment:
Cast iron frame
Solid one-piece steel base for extra stability
Conveniently located on/off switch
Miter gage
Dust chute
Saw blade
Product Specifications
Speed(s): 3,300 SFPM (wood); 39-278 SFPM (metal)
Net Weight: 234 lbs.
Dimensions: 68-1/4" H x 26-1/4" W x 18-1/8" D
Blade Size: Accepts 1/8" - 3/4" (3/8" x .025" x 92.5" standard, 3/8" x .025" x 104.5" w/optional riser block)
Miter Gage Groove: 3/4" W x 3/8" D
Table Tilt: 45° right, 10° left
RPM: 1,725
Motor: 1 hp, 1 ph., 115/230 V AC
Capacity: 6" under guide (12" under guide w/riser block, 13.5" from blade to frame)
Warranty: 2-year limited
Height: 44" from floor
Table Size: 14" x 14"
|
|
|
18" Vertical Metal & Wood Cutting Bandsaw (Shop Fox) Lot #589 (Sale Order 589 of 1039) This vertical metal cutting bandsaw is ideal for any metal fabrication work and can also be used for woodworking production.
A variable frequency drive speed control with digital readout provides infinitely variable blade speeds for any metal cutting application. Just turn the speed control dial for on-the-fly speed changes.
Inverter motor technology takes advantage of three-phase control using 220-volt, single-phase power.
Vertical cutting configuration also makes feeding intricate cuts easy, with plenty of control against the massive cast iron table.
Other features are:
Left and right table tilting control
Upper and lower blade guides
Rack and pinion adjustment on upper blade guide support
Precision-ground cast iron table
Fully balanced cast aluminum wheels with rubber tires
Quick release blade tension
Steel guide blocks
Two dust ports
Wheel brush on lower wheel
Upper blade guide scale with magnified cursor
Twin drive belts
Includes rip fence and miter gage
Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide and solid lever lock
Product Specifications
Blade Speeds: variable, 150-3,000 fpm
Blade Length: 133"
Cut: Max ht. 12"
Throat: 17-1/2"
Motor: 1-1/2 hp, 1,725 rpm, 5.1 A, 220 V, 1 ph
Table Tilt: 45° R; 10° L
Height: floor to table, 37-1/4"
Table Size: 18" x 24"
Dimensions: 76" H x 47" W x 26" D
Net Weight: 375 lbs.
Warranty: 2 years
Blade Size: 1/8" - 1-1/4"
|
|
|
20" Contour Saw (DoALL) Lot #590 (Sale Order 590 of 1039) This DoALL saw includes the following standard equipment:
One set of high-speed, insert type guard blocks for bands 1/16 through 1/2 inch.
One set of steel guide inserts for bands 1/4, 3/8 and 1/2 inch
Job selector
Band speed indicator
Chip pan
Band tension indicator
Dual range transmission
Transmission oil
Wrench for table trunnion
Wrench for saw guides
Instruction and parts manual
One bimetal saw blade
Band door interlocks
Unitized frame of arc-welded steel. Band wheels are aluminum with crowned rubber tires.
FOB factory. Please specify voltage -- three-phase, 208, 230 or 430 volts. Parts available for DoALL saws; call us for details.
Product Specifications
Table Size: 26" x 26"
RPM: 55 to 300
Wheel: Upper wheel adjustment, 3"
Band Size: Width capacity, 1/16 to 1/2"; length, 12' 10" or 154"
Height: Max. work ht., 13"
Throat: Band to column, 20"
Speed(s): 960-5,200 fpm (variable)
Tilt: 45° right; 10° left
|
|
|
4-1/2" Metal Cutting Bandsaw with Angle Cutting (WT Import) Lot #591 (Sale Order 591 of 1039) Blade Size: 1/2" x .025" x 64-1/2"
Blade Speeds: 80, 120, 200 rpm
Rectangular Capacity @ 0°: 4-1/2" x 6"
Circular Capacity @ 0°: 5"
Bed: 19-1/2" x 13-1/2" x 3"
Motor: 3/4 hp; 120V, 60 Hz, 1,720 rpm
Rectangular Capacity @ 45°: 3-5/8" x 3
Height: Horiz. 42-1/2", vert. 54-3/4"; floor to table, 28-1/2"
Rectangular Capacity @ 60°: 2-3/16" sq.
Circular Capacity @ 45°: 3-5/8"
Circular Capacity @ 60°: 2-3/16"
Net Weight: 180 lbs.
Angle: -45° to +60°
|
|
|
4-1/2" Motorized Horizontal-Vertical Bandsaw (WT Import) Lot #592 (Sale Order 592 of 1039) Instant change of positions
Automatic shutoff in horizontal position when cut is finished
Includes stand and adjustable vise
Blade and blade guides rotate for vertical head swing
Built-in vise
Both front and back vise jaws swivel
Can cut angles and irregular shapes
Automatic shutoff upon completion of work
Product Specifications
OAL: 64-1/2"
Blade Size: 1/2"
Motor: 1/2 hp, 110V
Speed(s): 80, 120, 220 rpm
Throat Depth: 5-1/2"
Height: 37" (38" as horizontal saw; 54" as vertical)
Rectangular Capacity: 4" x 6"
Round Capacity: 4-1/2"
Vise Size: 6-1/2" x 6"
|
|
|
4-Speed, All-Purpose Precision Bandsaw (Roll-In) Lot #593 (Sale Order 593 of 1039) With its large capacity of 14-1/2 by 9 inches and four speeds, this bandsaw from Roll-In handles metals, plastics and woods in a variety of cuts. A fast, accurate cut-off machine that is perfect for notching, mitering, slitting, slotting and doubles as a contour, profile and rip saw.
The Roll-In, equipped with a patented hydraulic feed regulator, has conveniently located fine tuning controls resulting in maximum production efficiency.
This saw is powered by a 1-horsepower motor and is built for long service with minimum maintenance. It's also simple to operate and maximizes user safety.
Product Specifications
Blade Speeds: 70, 140, 270, 525 SFPM
Overall Dimensions: 61" H x 30" W x 40" D
Table Area: 18-1/2" x 30", gray iron precision ground
Travel: 9"
Table Height: 30" to floor
Motor: 1 hp, 1 ph., 110/220V, 60 Hz
Capacity: 14-1/2"
Wheel: Gray iron wi/replaceable rubber tire, dim. 14" x 1-1/8"
Throat: 8-3/4"
Blade Size: 10' x 3/4", 10-tooth
|
|
|
5" Horizontal/Vertical Bandsaw (JET) Lot #594 (Sale Order 594 of 1039) UL listed single-phase motor
Heavy-duty 14-gauge stand with exclusive design
Large diameter wheels and built-in handle allow easy movement
Front legs have adjustable leveling pads
Ball bearing support blade wheel
Fully adjustable ball bearing blade guides
Heat treated and ground steel worm gear with bronze drive gear
Three blade speeds to choose from
Automatic shutoff after cut
Standard equipment includes vertical work table, carbon steel blade, bimetal 5/8 TPI saw blade and adjustable material stop. Stock no. 414458.
Product Specifications
Working Dim: 9-5/8" x 9-1/2"
Motor: 1/2 hp, 1 ph., 115/230V; prewired, 115V
Blade Wheel Dia: 7-3/8"
Swivel Radius: 45°
Capacity: Round: 5" @ 90°, 3" @ 45°. Rectangle: 5" x 3" @ 90°
Floor Area: 19" x 44"
Bed: 25-1/2" H
Speed(s): 80, 120, 200 fpm
Blade Size: 1/2" x .025" x 64-1/2"
Net Weight: 115 lbs.
|
|
|
5" x 6" Metal Cutting Bandsaw (Shop Fox) Lot #595 (Sale Order 595 of 1039) A bandsaw is a must for any metal shop. This one is equipped with many important performance features -- three speeds, automatic shutoff, sealed worm gear transmission, ball bearing drive wheel and blade guides.
As an added feature, it has a swiveling headstock, so there is no fussing with establishing the cut angle at the vise. Just set the workpiece length and swivel the headstock to an angle from -45 to 60 degrees and make the cut.
Product Specifications
Motor: 1/3 hp, 110/220V, 1 ph., 60 Hz
Circular Capacity @ 0°: 5" max.
Rectangular Capacity @ 60°: 1-3/4" x 2-3/16" max.
Net Weight: 170 lbs.
Bed: 19-1/4" x 13-1/2" x 3"
RPM: 1,720
Rectangular Capacity @ 0°: 5" x 6" max.
Angle: -45° to +60°
Floor Area: 26-1/2" x 20-1/2"
Amp Rating: 7 amps @ 110V, 3.5 amps @ 220V
Blade Speeds: 3 (80, 120, 200 fpm)
Height: 42-1/2" horizontal, 54-3/4" vertical; 29" floor to table
Dimensions: 23-3/8" W x 39" L
Circular Capacity @ 60°: 1-3/4" max.
|
|
|
7" x 12" Horizontal Direct Drive Metal Cutting Bandsaw Lot #596 (Sale Order 596 of 1039) Direct drive and quiet operation
Heavy-duty cast iron construction
Quick acting vise with 90- to 45-degree full mitering
Includes blade, chip brush and safety guards
Low voltage control with overload protection and automatic stop
Noise level within 70 decibels
Easy to clean, removable chip tray
Designed for cutting bars, tubes and profiles in a wide variety of materials
Product Specifications
Speed(s): 3 (86, 145, 180 fpm)
Blade Size: 3/4" x .032" x 93"
Dimensions: 51" x 18" x 40"
Motor: 1 hp, 110V, 60 Hz, 1 ph., 1,430 rpm
Net Weight: 286 lbs.
Rectangular Capacity @ 90°: 7" x 12"
Round Capacity @ 90°: 7"
Round Capacity @ 45°: 4"
Rectangular Capacity @ 45°: 5" x 6"
|
|
|
7" x 12" Horizontal Metal Cutting Bandsaw (WT Import) Lot #597 (Sale Order 597 of 1039) With casters, adjustable blade guides, automatic shutoff switch and quick-adjust vise. Also has hydraulic downfeed hold.
Product Specifications
Rectangular Capacity: 7" x 12"
Blade Size: 3/4" x .032 x 7' 9"
Angle: 45 to 90° 45° miter cuts
Speed(s): 3 (95, 140, 235 FPM)
Motor: 3/4 hp, 110V, 1 ph.
Throat Depth: 9"
Net Weight: 285 lbs.
Round Capacity: 7"
Height: 39-1/2" horizontal
Vise Size: 7" x 12"
Coolant System: Pump & 1-1/2 gal. tank
Angle Capacity: 6" x 7"
|
|
|
7" x 12" Horizontal Metal Cutting Bandsaw (WT Import) Lot #598 (Sale Order 598 of 1039) With 45-degree swivel. Hydraulic downfeed. Adjustable blade guides. Automatic shutoff switch. Quick adjusting vise. Includes 6 TPI bandsaw blade.
Product Specifications
Rectangular Capacity @ 90°: 7 x 8-1/4"
Net Weight: 385 lbs.
Coolant System: 1-1/2 gal. pump
Round Capacity @ 45°: 5"
Swivel Radius: 45°
Round Capacity @ 90°: 7"
Dimensions: 49" L x 24.5"W x 44.5 "H
Vise Size: 7" x 12"
Blade Size: 7' 9" x 3/4
Throat Depth: 9"
Speed(s): 4 (98, 164, 246, 328 FPM)
Motor: 3/4 hp, 110V
Rectangular Capacity @ 45°: 3-1/3" x 5-1/2"
|
|
|
7" x 12" Metal Cutting Bandsaw Lot #599 (Sale Order 599 of 1039) Great for production shops, this 7" x 12" metal cutting bandsaw can handle larger jobs. It features rectangular and circular cutting capacities; angle cutting ability; four blade speeds; internal coolant system; quick setting vise; hydraulic downfeed control; and automatic shutoff. Wheels and a handle add mobility for even greater convenience. 2.5-gallon coolant capacity.
Product Specifications
Net Weight: 310 lbs.
Rectangular Capacity @ 90°: 7" x 12"
Circular Capacity @ 45°: 5"
Floor Area: 13" x 38"
Rectangular Capacity @ 45°: 4-3/4" x 4-1/2"
Dimensions: 48"L x 16"W x 37-5/8"H
Blade Speeds: 4 (80, 130, 180, 235 fpm)
Blade Size: 93" x 3/4"
Motor: 1 hp, 110/220 V, 1 ph., prewired 110 V
Circular Capacity @ 90°: 7"
|
|
|
8" x 14" Horizontal Bandsaw (WT Import) Lot #600 (Sale Order 600 of 1039) With hydraulic downfeed. This four-speed horizontal bandsaw comes complete with tungsten carbide blade guide, blade tension and tracking adjustment, feed rate adjustment, 0- to 45-degree quick-acting vise and coolant pump. Belt-driven pulley system for ease of changing speeds.
Product Specifications
Round Capacity @ 90°: 8"
Rectangular Capacity @ 45°: 8" x 8"
Round Capacity @ 45°: 8"
Rectangular Capacity @ 90°: 8" x 14"
Net Weight: 620 lbs.
Dimensions: 64" L x 23" W x 43" H
Wheel Dia: 12" blade wheel
Speed(s): 4 (82, 132, 170 and 235 FPM)
Blade Size: 113.5" x 1" (.035)
Motor: 1-1/2 hp, 115V, 1 ph
|
|
|
9" x 16" Automatic Cut-Off Saw (DoALL) Lot #601 (Sale Order 601 of 1039) Saw guides, spring-loaded, carbide faced inserts
Lever operated head position control
Instruction and parts manual
Recirculating coolant system. Submersible 4 gpm (15 liter/min) pump with 110-vot single-phase motor and pressure connecting hose and fittings (60 Hz) (50 Hz -- use external mounted coolant pump)
1/2-horsepower (.375 kilowatt) triple pinch roll material drive
One bimetal saw band
Pneumatic system with filtration plant air required -- minimum 85 PSI at minimum 1 CFM
Three roll discharge stand
Shovel rake and chip discharge chute
Leveling screws
Flushing hose
Band door interlocks
Mechanical variable vise pressure
Complimentary coolant package
Replaceable steel wear plates on bed
Work height selector
Saw blade guard
Powered band brush
Instruction plate with sawing recommendations
Preset cut counter
Work light
FOB factory. Please specify voltage -- 208, 230 460; 60 Hz, 3-phase.
Product Specifications
Motor: Band drive, 3 hp, 3 ph., 208/230/460V, 60 Hz (please specify voltage)
Wheel Dia: 14-1/2" cast iron
Band Tension: Spring loaded by handwheel
Coolant System: Recirculating
Feed Type: Powered vertical pinch rollers
Butt End: 6-1/2" min.
Index Length: 3/16" min.; adjustable workstop to 24"; repeatable to &177;1/64"
Speed(s): 105-275 fpm; inverter drive, 50-400 fpm
Band Size: 1" x .035 x 158" (recommended)
Circular Capacity: 10-3/4"
Rectangular Capacity: 9" x 16"
Feed Control: Infinitely variable, hydraulic control, spring-balanced head
|
|
|
9" x 16" Horizontal Bandsaw with 45° Swivel (WT Import) Lot #602 (Sale Order 602 of 1039) Large tungsten carbide guide and bridge-type portal frame
Hydraulic downfeed
Instant blade tension
Automatic stop for machine when stock is exhausted
Rugged fabricated steel construction, powerful drive and positive vise
Easy blade change
Adjustable tension, rigid and precise blade guides
Centralized controls avoid operator fatigue
Efficient coolant system with built-in tank, pump and trough
Product Specifications
Net Weight: 1,060 lbs.
Height: 13" to vise
Blade Size: 131-3/4 x 1"
Motor: 1-1/2 hp, 60 Hz, 220V, 3 ph.
Dimensions: 72" L x 30" W x 46" H
Round Capacity @ 90°: 9"
Rectangular Capacity @ 45°: 9" x 11-3/4"
Vise Size: 8" W
Wheel Dia: 13"
Speed(s): 82-247 fpm
Round Capacity @ 45°: 9"
Rectangular Capacity @ 90°: 9 x 17-3/4"
|
|
|
9" x 16" Manual Cutting Bandsaw (DoALL) Lot #603 (Sale Order 603 of 1039) This saw includes the following standard equipment:
Recirculating coolant system
Saw guides and spring-loaded carbide-faced inserts
Discharge tray, 19 by 24 inches
Saw blade guard
Powered band brush
Swivel vise jaws
Replaceable steel wear plates on bed
Complimentary coolant package
Instruction plate with sawing recommendations
Fine adjustment head feed control
Instruction and parts manual
Shovel rake
One BI-METAL® saw blade
Band door interlocks
FOB factory. Please specify voltage -- three-phase, 208, 320 or 460 volts. Parts available for DoALL saws; please call us for details.
Product Specifications
Circular Capacity @ 90°: 10-3/4"
Circular Capacity @ 45°: 8" right
Rectangular Capacity @ 90°: 9" x 16"
Band Size: 1" x .035 x 158" recommended
Vise: Manual
Rectangular Capacity @ 45°: 9" x 8"
Speed(s): Variable, 105-275 fpm
Feed Control: Infinitely variable, hydraulic control, spring-balanced head
Coolant System: 5 gal.
Wheel Dia: 14-1/2" cast iron
Band Tension: Spring loaded by handwheel
Motor: 3-ph., 208/320/460V (please specify voltage)
|
|
|
9" x 16" Horizontal Bandsaw with Hydraulic Downfeed Lot #604 (Sale Order 604 of 1039) Large tungsten carbide guide and bridge type portal frame
Instant blade tension.
Automatic stop for machine when stock is exhausted
Rugged fabricated steel construction
Powerful drive and positive vise
Easy blade change
Adjustable tension; rigid, precise blade guides
Centralized controls to avoid operator fatigue
Efficient coolant system with built-in tank
1/8-horsepwer pump and trough
Product Specifications
Wheel Dia: 14" blade wheel
Blade Length: 1" x 119"
Motor: 1-1/2 hp; 60 Hz, 220V, 1 ph.
Dimensions: 60" x 28" x 42"
Height: 26" to vise
Net Weight: 730 lbs.
Capacity: 9" at 90°
Speed(s): 82-235 fpm
Vise Size: 8"
|
|
|
9” x 16” Manual Swivel Cutting Bandsaw (DoALL) Lot #605 (Sale Order 605 of 1039) The C619-S swivel head saw offers the advantages of a horizontal cut-off saw, combined with the versatility of an angle cutting saw that swivels up to 45 degrees.
Included items:
Swivel head to 45 degrees
One BI-METAL™ saw band
Recirculating coolant system. Submersible 4 gpm pump with 110-volt single-phase motor and pressure connecting hose and fittings
Fine adjustment head feed control
Shovel rake
Unloading tray, 19 x 24 inches
Work light
Band door interlocks
Replaceable steel wear plates on bed
Instruction plate with sawing recommendations
DoALL cutting fluid
Complimentary coolant package
Saw blade guard
Saw guide, spring-loaded, solid carbide inserts
Powered band brush
Instruction and parts manual
FOB factory. Please specify voltage -- three-phase, 208, 230 or 460 volts. Parts available for DoALL saws; call us for details. One-year warranty.
Product Specifications
Circular Capacity @ 45°: 10-3/4" right
Circular Capacity @ 90°: 10-3/4"
Rectangular Capacity @ 90°: 9" x 16"
Band Size: 1" x .035" x 158" (recommended)
Speed(s): 105-275 rpm (variable)
Feed Control: Infinitely variable, hydraulic, spring balanced head
Coolant System: 5 gal.
Vise: Manual
Wheel Dia: Cast iron, 14.5"
Band Tension: Spring loaded by handwheel
Motor: 3-ph., 208/230/640V (please specify voltage)
Rectangular Capacity @ 45°: 9" x 10-3/4" right
|
|
|
Horizontal-Vertical Bandsaw (JET) Lot #606 (Sale Order 606 of 1039) UL listed motor
Heavy cast iron bow and bed
Hydraulic downfeed for ease of cut
Hardened and ground worm gear
Roller cabinet with built-in chip tray
Automatic shutoff after cut
Standard are a complete coolant system, adjustable material stop, bimetal 5/8 TPI saw blade, vertical worktable and chip brush. Stock no. 414468.
Product Specifications
Net Weight: 318 lbs.
Floor Area: 20-1/2" x 49-1/2"
Bed Height: 23"
Blade Speeds: 80, 130, 180, 285 fpm
Motor: 3/4 hp, 1 ph., 115/230 V prewired 115 V
Rectangular Capacity @ 90°: 7" x 5"
Blade Wheel Dia: 11-3/4"
Round Capacity @ 45°: 4-1/2"
Blade Size: 3/4" x .035" x 93"
Vise Swivel: 45°
Vertical Worktable: 9-3/8" x 11"
Throat Depth: 7"
Round Capacity @ 90°: 7"
|
|
|
Horizontal & Vertical Bandsaws (Wellsaw) Lot #607 (Sale Order 607 of 1039) Convertible (horizontal/vertical)
Mobile transfer system includes pull-out handle that automatically locks saw head assembly in down position, plus a foot-actuated jacking lever to position wheels for easy mobility
Stock stop assembly
Ball bearing blade guides
Three-speed V-belt drive and blade brush
Under voltage and overload protection
Power interruption breaker switch
Precision ground bed and quick-acting vise
Adjustable pressure gravity feed
Auto cutoff at cut completion
Blade guards and Tiger-Tooth® blade
Blade tension is manual take-up
Coolant system tank capacity is 4 gallons for model 58BW, with a 115-volt AC submersible pump
Product Specifications
Blade Speeds: 76, 141, 268 fpm
Rectangular Capacity: 9-1/2" x 11"
Wheel Dia: 11"
Bed Height: 26"
Vise Swivel: 45°
Vise: Manual screw control
Motor: (Blade drive) 1/2 hp, 115V, 60 Hz, 1 ph.
Floor Area: 26" x 54"
Blade Size: 1/2" x .025" x 7' 9"
Table Size: 8" x 10"
Throat Depth: 6-1/4"
45° Angle Capacity: 5-1/2" x 5-1/2"
Flat Capacity: 11"
Circular Capacity: 9-1/2"
Throat Height: 9-1/2"
|
|
|
Miter Head Bandsaws (Wellsaw) Lot #608 (Sale Order 608 of 1039) Saw head swivels to make miter cuts from 0 to 60 degrees
No need to swing the stock or adjust the vise jaws
Turntable pivots on precision ball bearings
25-inch stock stop projection
Standard 5-foot by 18-inch infeed roller conveyor
Hydraulic variable feed rate
Combination carbide guides with rollers
Infinitely variable speed blade drive
Rite-Tension® blade tensioning
Wet cutting system, powered blade brush
115 volts at the controls
Totally enclosed motor
Magnetic starter with under voltage and overload protection
Precision ground bed, top loading blade, quick acting vise and stock stop assembly
Complete OSHA guarding
Tiger-Tooth® bimetal blade
Coolant for initial start-up (8 gallons, 170 FPH, .6 amp, 115V)
Stock stop projection, 25 feet
Options available: blade break/stall shutoff; work light; 5- and 10-foot by 18-inch roller conveyors; 6- and 12-inch stock stands
Product Specifications
Blade Speeds: 70-375 sfpm (infinitely variable)
Circular Capacity @ 0°: 13" (also 90°)
Height: 35" to top of bed
Floor Area: 90" x 76"
Feed Type: Gravity, variable, hydraulic
Wheel Dia: 15" cast iron
Blade Size: 1" x .035" x 12' 6"
Motor: (Blade drive) 3 hp, 208/230/460V, 60 Hz, 3 ph.
Rectangular Capacity @ 60°: 8-1/2" x 8"
Circular Capacity @ 60°: 8"
Rectangular Capacity @ 45°: 13" x 9-1/2"
Rectangular Capacity @ 0°: 13" x 15-1/4" (also 90°)
Circular Capacity @ 45°: 11-1/2"
Motor: (Blade drive) 2 hp, 115/208/230V, 60 Hz, 1 ph.
|
|
|
Vertical Metal Cutting Bandsaws (WT Import) Lot #609 (Sale Order 609 of 1039) This first class saw is complete with up and down adjustable V-guide, chip blower, reserve load guide bar and annealing butt welder.
Chip blower keeps chips away from workpiece, allowing smooth one-step cutting without the annoyance of having to constantly remove chips.
Easy-to-adjust reserve load guide bar keeps bar in place even if retaining screw loosens. This prevents surface marring of workpiece.
The butt welder allows on-machine welding of blades (1/8- to 5/8-inch capacity). The blade speed is shown on a graduated readout dial. Speed is easily adjusted with a turn of the hand wheel.
Standard features include:
Saw blade butt welder with integrated annealing unit
Blade shear
Grinder
Built-in blade and tire cleaning brush
Low-voltage work lamp
Saw blade ready for use
Insert type with tungsten-faced guides
Set of required tools
Instruction and parts manual
Product Specifications
Dimensions: 33" L x 13" W x 65" H
Height: 8" max. working
Speed(s): 60 cycles (95-295 fpm)
Motor: 1 hp, 3-ph., 220V
Blade: 113" L, 5/8" max. width
Capacity: 14" blade to column
Table Tilt: 15° four ways
Net Weight: 680 lbs.
Table Size: 15-7/8" x 19-7/8"
Wheel Dia: 14"
|
|
|
Vertical Self-Feed Bandsaws (JET) Lot #610 (Sale Order 610 of 1039) Designed for multiple uses and cuts both ferrous and nonferrous metals.
Features:
Welded frame and base of heavy-gauge steel
Swivel vise for mitering
Heavy-duty cast iron table
Four blade speeds
Hydraulic feed control
Guide rollers accept blade sizes 1/8, 1/4, 3/8, 1/2, 5/8, 3/4 and 1 inch
Standard are four foot pads, work lamp, chip tray, miter gage, bimetal 5/8-inch saw blade, extension roller and blade speed and pitch selector.
Product Specifications
Blade Speeds: 70, 140, 280, 580 spfm
Dimensions: 40" W x 30-1/2" D X 63" H
Capacity: 14-1/2" height 8-1/2" throat
Table Size: 30-1/2" x 18-1/2"
Table Height: 30" at 90°
Blade Size: .025 W X 120" L; 1" W max.
Blade Wheel Dia: 14"
Motor: 1 hp, 3 ph., 230/460 V, prewired 230 V
Net Weight: 551 lbs.
|
|
|
Mini Machine Combo Packages (WT Import) Lot #611 (Sale Order 611 of 1039) Package features a mini mill and drill machine and a precision mini table lathe, with choice of MT3 or R8 spindles. Combines two of our popular WT Import mini machines with a great price.
Mini mill and drill machine is variable speed. Its features include dovetail column with adjustable dovetail ways; adjustable depth stop; line feed control; geared drive; clear guard and rubber chip guards; and safety shutoff switch. Functions are drilling and end and face milling.
Mini table lathe has a 1/2-horsepower motor and is UL approved. It is used for drilling, boring, taper cutting, threading, cylinder turning and counterfacing. It includes a 3-inch three-jaw chuck with 5/8-inch center hole. Features include automatic feed cutting and thread inch dial.
Specifications
Mill and drill machine:
Swing: 12-3/4"
Max. table travel: 9-1/4"
Max. cross slide travel: 4"
Max. spindle travel: 7"
Spindle rotary angle: 45 degrees left to right
Speeds: Low, 0 to 1,100 rpm; high, 0 to 2,500 rpm
Table size: 3-5/8" x 15-3/4"
Motor: 1/2 horsepower, 110 volts DC
Drilling capacity: 1/2"
End mill capacity: 5/8"
Face mill capacity: 1-1/8"
Mini table lathe:
Swing over bed: 7"
Swing over cross slide: 4"
Distance between centers: 10"
Spindle bore: 13/16"
Bore taper: MT3
Center taper: MT2
Lead screw: 5/8" diameter x 16 TPI
Cross slide travel: 3"
Inch threading: 2-5/8"
Compound rest travel: 2"
Maximum cutting tool size: 5/8"
Bed face width: 3-1/4"
Overall bed length: 15-3/4"
Motor: 1/2 horsepower
Net weight: 68 pounds
Speeds: High and low, 0 to 2,500 rpm
Product Specifications
Type: 3 MTSplindle Package
|
|
|
Horizontal & Vertical Turret Mill (WT Import) Lot #612 (Sale Order 612 of 1039) ISO 30 horizontal milling machine arbor taper and R8 vertical end mill spindle taper. With eight speed steps on vertical spindle and nine steps on horizontal.
Product Specifications
Spindle Speed(s): 8 vert. (120-2,200 rpm); 9 horiz. (120-1,908 RPM)
Motor: 2 hp, 3 ph. (vert.); 1-1/2 hp, 3-ph. (horiz.)
Dimensions: 53" x 60" x 85"
Table Travel: 20-3/4" (X); 8-3/8" (Y); 15-1/8" (Z)
Spindle Distance: To work table, 4-1/2" min.,19-21/32 max.
End Mill Capacity: 5-3/4" max.
Face Mill Capacity: 4" max.
Drilling Capacity: 2" max.
Table Size: 9-7/8" x 39-3/8"
Spindle Travel: 4-1/2" vert.
Net Weight: 2,300 lbs.
Spindle Taper: R8
|
|
|
10" x 54" Milling Machine Replacement Heads (WT Import) Lot #613 (Sale Order 613 of 1039) When your mill starts to get a little tired, just replace the head -- not the whole machine. Made with Class 5 bearings and ready to mount. Fits most Asian Bridgeport type mills. Includes mounting bolts, quill feed handles and fine feed handle.
Product Specifications
Type: Step pulley
Spindle: R-8
Motor: 3 hp, 3 ph., 220V
Spindle Travel: 5"
Spindle Speed(s): 16; 78-4,800 rpm
Feed: .0019", .0035", .0058"
|
|
|
10" x 54" Heavy-Duty Precision Mills (WT Import) Lot #614 (Sale Order 614 of 1039) With R8 spindle and class 4 bearings. Hardened and ground square ways, and X and Z axes are hand scraped and have box ways.
Product Specifications
T-Slot: 5/8"
Cross Slide Travel: 15-3/4"
Distance Bet. Centers: 2-1/2"
Floor Area: 6' x 9'
Max. Table Capty.: 550 lbs.
Motor: 3 HP, 220V, 3-ph.
Net Weight: 3,500 lbs.
Dimensions: 73" L x 76" W x 87" H
Speed(s): 16 (variable 60-4,200)
Spindle Feed: .003, .008, .0015
Head 90°: Forward & backward
Head 45°: R & L
Spindle Distance: Nose to table, 1"-17"; axis to vertical guideway, 4" - 24-1/2"
Axial: 5"
Table Area: 10" x 54"
Swivel Radius: 90° max. in longitudinal vertical plane; 45° in cross vertical plane
Type: Variable speed
Table Travel: 36" L x 17" V
Taper: R8
|
|
|
10" x 34" Vertical Wood Mill (Shop Fox) Lot #615 (Sale Order 615 of 1039) Rely on accurate workpiece control and increased safety with the versatile, solid cast iron model M1005 wood mill.
Hardened table has a 2-1/2 inch hole for drilling operations, three T-slots and adjustable table stops
Machine will accurately mill, drill or cut dovetails and slots into wood, metal or plastic
Spindle stop with micro-adjustable setting
Chrome-plated precision ground quill
Table locks for high rigidity
Adjustable table stops for accurate stops for cuts and repeatability
Hardened and ground column and knee slide ways
Table surface hardened and ground
Heavy-duty saddle supports full width of table
Drawbar included
Product Specifications
Table Width: 51" (tip of handwheel to tip of handwheel)
Net Weight: 1,605 lbs.
Depth: Back of motor to tip of front handwheel, 41-1/4"
Spindle Speed(s): 9 (420-5,000 rpm)
Knee Travel: 18"
Headstock Swivel: 90° left and right
Warranty: 2 years
Table Size: 10" x 33-3/4"
T-Slot: 3 on 2-1/2" centers, 3/8" studs
Motor: 1-1/2 hp, 1 ph., 110/220V, 6.4/8.2 amps, TEFC
Table Travel: 17-3/4" longitudinal; 12" cross
Spindle Taper: R8
Spindle Distance: Max. to table, 20-7/16", to column, 16-1/2"
Spindle Travel: 3-1/2"
RPM: 3,450
Head Tilt: 90° left and right
|
|
|
10" x 54" R8 Vertical Mill (JET) Lot #616 (Sale Order 616 of 1039) Meehanite casting
Hardened and ground table certified 52C Rockwell hardness
Chrome lead screws on X and Y axes
Box style ways on Y and Z axes
Satin chrome finished dials
Precision bored and honed milling head
Chrome plated motor shaft has lower bearing support
Motor pulley ground to increase belt lift
One-piece quill pinion and shaft
Three-stage power downfeed with automatic stop
Heavy-duty spindle brake
Locks on all movable surfaces
Internal coolant built into base for use with coolant system (coolant pump not included)
One-shot lubrication system
Way covers
Drawbar
Toolbox with tools
Product Specifications
Spindle Taper: R8
Longitudinal Feed: 32"
Table Size: 10" x 54"
Ram Travel: 20-1/2"
Knee Travel: 17-1/2"
Overall Dimensions: 92" X 108" x 80"
T-Slot: Three 5/8"
Collets: 7/8"
Cross Slide Travel: 16"
Quill Travel: 5"
Spindle Distance: To column, 26"
Table to Spindle: Max. 19-4/5"
Net Weight: 3,450 lbs.
Quill Dia: 3-3/8"
No. of Spindle Speeds: Variable
Motor: 5 hp, 3 ph., 230/460 V
Head Movement: 90° left and right
|
|
|
12" X 54" 5 HP Heavy-Duty Vertical Turret Mill (Import) Lot #617 (Sale Order 617 of 1039) Standard accessories include x and Y axes, Z axis power feeds, drawbar, one-shot lubrication system, tools with toolbox and halogen lamp. This machine ships FOB from Michigan. Leasing available.
Product Specifications
Dimensions: 81" L x 74" W x 84" H
Spindle Taper: NST40
Ram Travel: 18"
Knee Travel: 16"
Quill Feeds: .0015", .003", .008"; rev.
Motor: 5 hp, 220V, 3-ph.
Load Limit: Table, 750 lbs.
Net Weight: 3,300 lbs.
Spindle Speed(s): 60-3,600 RPM
Table Travel: 34"
Table Size: 12" x 54"
Quill Travel: 5"
Cross Travel: 15"
|
|
|
6" x 26" Knee Milling Machine (WT Import) Lot #618 (Sale Order 618 of 1039) Big features in a bench-size machine. Dovetail knee ways and tilting head increase the versatility of this compact mill and drill machine -- and a free stand is included. Leasing is available.
Product Specifications
Motor: 1HP, 110/220V
Net Weight: 820 lbs.
Head Tilt: 45 deg.
Dimensions: 45" H x 33" D x 55" W
Spindle Nose: R8
Spindle Speed(s): 9 (200-2,300 rpm)
Spindle Travel: 3"
Table Area: 29-1/4" x 6-1/4"
Travel: 14-3/4" X axis, 5-5/8" Y axis, 12" vertical knee
T-Slot: (3) 1/2"
Working Dim: 26" x 6-1/4"
|
|
|
8" x 36" Vertical Milling Machine (WT Import) Lot #619 (Sale Order 619 of 1039) This machine features the versatility of a large mill without the space requirements.
Product Specifications
Head Tilt: 90° R & L
Longitudinal Travel-Manual: 23"
Knee Travel: 13"
Motor: 1-1/2 hp, 3 ph., 220V, 60 Hz
Net Weight: 1,665 lbs.
T-Slot: 5/8"
Height: 76"
Cross Slide Travel: 9.4"
Table Area: 8" x 36"
Spindle Taper: R8
RPM: 100-3,500
Spindle Travel: 5"
Headstock Swivel: 360°
Speed(s): 10
|
|
|
9" x 42" Vertical Milling Machine (WT Import) Lot #620 (Sale Order 620 of 1039) Power quill downfeed and one-shot lubrication. Head has positive locking dowels at 90 degrees. Dovetailed ways. Machine ships from our Michigan location.
Product Specifications
Table Size: 9" x 42"
Head 45°: 0" - 11-1/4"
Longitudinal Travel-Power: 26-3/4"
Cross Slide Travel: 12"
Max. Table Capty.: 440 lbs.
Vertical Travel: 15-3/4"
Head 90°: Min. 6-3/4"; max. 19"
Longitudinal Travel-Manual: 30°
Type: Step pulley
Dimensions: 84" H x 59" D x 63" W
T-Slot: 5/8"
Net Weight: 2,300 lbs.
Spindle Travel: 5"
Floor Area: 5' x 7'
Spindle Speed(s): Variable (70-4,200)
Table to Spindle: Min: 1", Max: 17"
Head 45°: Outward, min. 9"; max. 21"
Motor: 2 hp, 3 ph., 2 speed, 220V
|
|
|
9" x 49" Precision Milling Machines (WT Import) Lot #621 (Sale Order 621 of 1039) Available in three phase; single phase step pulley; or three phase, variable speed.
Product Specifications
Head Movement: ±90° side-to-side, ±45° front-to-back
Table Area: 9" x 49"
Net Weight: 2,200 lbs.
Type: Three phase, variable speed
Feed Type: 34" long., 11" cross
Spindle Feed: .0019/.0035..0058 ipr
Spindle Travel: 5"
T-Slot: (3) 5/8"
Spindle Taper: R8
Load Limit: 550 lbs. max.
Spindle Speed(s): 70-4,200 rpm (infinitely variable)
Motor: 2 HP, 220V, 3-ph.
Spindle Nose: 2.75"-18.75" to table
Dimensions: 66.5" L x 66.5" W x 81" H
Rotation: 360° overarm
Axis Travels: 6"-18" to vertical guide way
|
|
|
Variable Speed Vertical Milling Machine (JET JTM-1050) Lot #622 (Sale Order 622 of 1039) Tolerance test sheet included
Meehanite casting
Hardened and ground table
Chrome lead screws on X and Y axes
Turcite B on X and Y axes
Satin chrome finished dials
Precision bored and honed milling head
Large diameter quill is chromed
High precision Class 7 spindle bearings
Spindle head internally cooled
No fuse breaker power connection
Chrome plated motor shaft with bearing support at end
One-piece quill pinion and shaft
Three-stage power downfeed and lever downfeed
Heavy-duty spindle brake and motor drive
Double knee and table locks; ram with double locks; saddle with one lock
Hardened and ground square vertical knee and cross ways
Adjustable gibs throughout
Dish in base with internal coolant sump (pump not included)
One-shot lubrication system, way covers, drawbar and toolbox with tools are standard
Note: Use of static phase converter will void warranty. .
Product Specifications
Spindle Speed(s): variable (70-3,800 RPM)
Quill Dia: 3-3/8"
Spindle Distance: To table, 19"; To column, 6" min., 26-1/2" max.
Height: 78"
Table Travel: 35" max. longitudinal, 16" max. cross, 16-1/2" max. knee
Table Size: 10" x 50"
Headstock Swivel: 45° front-back; 90° right-left
Spindle Travel: 5"
Motor: 3 HP, 3-ph., 230/460V, prewired 230V
Spindle Taper: R8
T-Slot: 3 (5/8", 2-1/2" center)
Collets: 1/8"-7/8" capacity
Downfeed: .0015-0.003-0.006
Warranty: 2 years
Net Weight: 2,900 lbs.
|
|
|
Variable Speed Vertical Milling Machine (JET JTM-4VS) Lot #623 (Sale Order 623 of 1039) Tolerance test sheet included
Meehanite casting
Precision bored and honed milling head
Satin chrome finished dials
Large diameter quill is chromed
High precision Class 7 spindle bearings
Spindle head internally cooled
Chrome plated motor shaft with bearing support
One-piece quill pinion and shaft
Three-stage power downfeed with automatic stop; fine handwheel and lever downfeed
Heavy-duty splined motor drive and spindle brake
Double knee and table locks; ram with double locks; saddle with one lock
Precision hardened and ground table and ways
Adjustable gibs throughout
Dish in base with internal coolant sump (pump not included)
One-shot lubrication system, way covers, drawbar and toolbox with tools are standard
Note: Use of static phase converter will void warranty.
Product Specifications
Warranty: 2 years
Spindle Distance: To table, 17-1/2"; To column, 6-3/4" min., 19" max.
Spindle Travel: 5"
Table Size: 9" x 49"
Table Travel: 34" max. longitudinal, 12" max. cross, 16" max. knee
T-Slot: 3 (5/8", 2-1/2" center)
Spindle Speed(s): variable (60-4,200 RPM)
Motor: 3 hp, 3-ph., 230/460V, prewired 230V
Collets: 1/8"-7/8" capacity
Spindle Taper: R8
Downfeed: .0015-0.003-0.006
Height: 85"
Quill Dia: 3-3/8"
Headstock Swivel: 45° front-back; 90° right-left
Net Weight: 2,420 lbs.
|
|
|
9" x 49" Variable Speed Vertical Milling Machines (JET) Lot #624 (Sale Order 624 of 1039) Package includes X Powerfeed and Anilam 411 digital readout installed free
Set of 12 JET 6-inch C clamps also included free with purchase
Two-year warranty
Meehanite® casting
Precision bored and honed milling head
Chromed large diameter quill
High precision Class 7 spindle bearings
Chrome plated motor shaft with lower bearing support
Internally cooled spindle head
Satin chrome finished dials
Three-stage power downfeed with automatic stop
Heavy-duty spindle brake
Locks on all movable surfaces
Precision hardened and ground ways and table
Adjustable gibs throughout
Internal coolant tank built into casting base for use with coolant system (coolant pump not included)
Tolerance test sheet included
Way covers
Draw bar
Includes toolbox with tools
Two-year warranty
Product Specifications
Knee Travel: 16 in.
Longitudinal Travel: 34 in.
T-Slot: 3 @ 5/8 in.; centers, 2-1/2"
Spindle Taper: R-8
Quill Travel: 5"
Downfeed: (per/rev./.in) .0015, .003, .006
Ram Travel: 14-1/2 in.
Spindle Speed(s): Variable (60-4,200 rpm)
Table Size: 9 x 49 in.
Net Weight: 2,420 lbs.
Dimensions: 65-1/2 in. W x 85 in. H x 63 in. L
Motor: 2 hp, 1 ph., 115/230V, 230V prewired
Quill Dia: 3-3/8 in.
Cross Travel: 12 in.
Capacity: Table, 660 lbs. max.
|
|
|
Vertical Milling Machines (JET) Lot #625 (Sale Order 625 of 1039) Precision bored and honed milling head
Chromed large diameter quill
High-precision spindle bearings
Over 10 inches of front-to-back ram travel
Table, knee and saddle have locks
Precision ground table
Head tilts left or right
Graduated scale on column
Precision ground dovetail
One-shot lubrication system, draw bar and toolbox with tools are standard
Note: Use of static phase converter will void warranty.
Product Specifications
Headstock Swivel: 90° R & L
Motor: 1-1/2 hp, 3-ph., 2-speed, 230V only
Net Weight: 1,544 lbs.
Table Travel: 25-1/4" max. longitudinal, 9-1/2" max. cross, 14" max. knee
Spindle Taper: R8
Table Size: 7-7/8" x 35-3/4"
Quill Dia: 3-3/8"
Height: 78"
Collets: 1/8"-7/8" capacity
Spindle Distance: To table, 14"; To column, 5-1/4" min., 15-3/4" max.
Spindle Travel: 5"
T-Slot: (3) 5/8" x 7-7/8" x 35-3/4; 2-1/2 centers
Warranty: 2 years
Spindle Speed(s): 10 (120-1,550 rpm)
|
|
|
1" x 42" Belt & 8" Disc Multi-Material Sander (WT Import) Lot #626 (Sale Order 626 of 1039) An extremely versatile finishing tool for wood, metal and plastic. Any flat or irregular surface can be ground, sanded or polished. This sander is complete with miter gage and adjustable angle table.
Product Specifications
Belt Speed: 1,300 rpm
Motor: 1/3 hp
Net Weight: 57 lbs.
Disc Diameter: 8"
Spindle Speed(s): 1,750 rpm
Table Size: Belt sander, 8-1/4" x 6-3/4"; disc sander, 12-3/8" x 4-5/8"
Table Tilt: Both 0-45°
Height: 21"
Capacity: 7" W x 4" th.
Dimensions: 11" H x 21.5" L x 15.25" D
|
|
|
12" Disc Sander (Shop Fox) Lot #627 (Sale Order 627 of 1039) This production style 12-inch disc sander is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. With miter gage, precision ground cast iron table, ball bearing construction, powder coat paint finish and safety key operated switch. Uses PSA sanding discs.
Product Specifications
Height: 13-1/4"
Disc Diameter: 12" cast aluminum
RPM: 1,725
Motor: 1 hp TEFC, 110V, direct drive
Table Size: 17.5" W x 8.25" D
Dimensions: 13" W x 13.5" H x 10" D
Table Tilt: 0-45°
|
|
|
12" Disc Sander (WT Import) Lot #628 (Sale Order 628 of 1039) With miter gage. Actual color may vary.
Product Specifications
Net Weight: 100 lbs.
Table Size: 8-1/4" x 19-1/2"
Spindle Speed(s): 1,720
Disc Diameter: 12"
Motor: 1 hp, 115V, 1 ph., 15 amps
|
|
|
12" Disc Sander (Wilton) Lot #629 (Sale Order 629 of 1039) This machine has an optimum speed of 2,400 rpm, ideal for both metal and wood finishing.
Other features:
Fully machined, balanced disc runs vibration free
Plain and compound miters easily obtained by using the standard die-cast aluminum miter gage
Easy to read scale shows exact degree of table tilt
Large cast iron slotted table
Heavy-duty one-piece steel stand
Product Specifications
Disc Speed: 2,400 rpm
Warranty: 2-year limited
Table Tilt: 45° out, 20° in
Dimensions: 16" W x 19" D x 43" H
Motor: 1-1/2 hp, 1 ph., 115/230V, push button switch, prewired 115V
Net Weight: 164 lbs.
Table Size: 12" x 16-3/8"
Disc Diameter: 12"
Miter Gage Groove: 3/8" x 3/4"
|
|
|
12" Disc Sander with Dust Collection (Delta) Lot #630 (Sale Order 630 of 1039) Manual brake stops sanding disc in seconds
Tilt-in cast iron table with 90-degree and 45-degree positive stops locks into position with spring-loaded table handles
Cast-iron base with pre-drilled base holes for quick, easy bench mounting
Integral dust collection fan draws dust away from table and into hose for cleaner sanding operation
Dust hose with 2-1/4 inch ID connector attaches quickly to any standard shop vacuum
Miter gage slot machined into the table for projects that require sanding an angle or straight edge
Includes wrenches, 80-grit abrasive disc and manual
Product Specifications
Disc Speed: 2,500 rpm
Belt Speed: 1,971 sfpm
Dimensions: 15" H x 17-3/4" D x 17-1/4" W
Table Tilt: 45° up & down
Motor: 1/2 hp, 120V
Table Size: 17-1/4" x 6-1/4"
Miter Gage Groove: 3/8" x 3/4"
Disc Diameter: 12"
|
|
|
12" x 6" Sanding Center (Delta) Lot #631 (Sale Order 631 of 1039) Movable deflector allows for more efficient dust collection
Powerful 1-1/2-horsepower TEFC motor for long-lasting, smooth performance; manual thermal overload protector to prevent burnout
Star-wheel, eccentric belt tracking control for easy and accurate belt alignment
Sturdy steel stand for greater operating stability
Extra large cast-iron tables are ribbed to prevent distortion and tilt +45 degrees for bevel sanding
Positive stops at 0 to 45 degrees with scale and pointer
Milled table slots permit use of accessory miter gage for accurate straight and angle sanding
Integral dust collector connector with single 4-inch diameter outlet
Fully machined and balanced steel disc for smooth, vibration-free operation and proper adhesion of adhesive discs
Product Specifications
Belt Speed: 3,000 sfpm
Net Weight: 290 lbs.
Disc Speed: 2,100 rpm
Table Tilt: Belt, +20° and -45° disc, 0-45° up and down
Dimensions: 19" W x 31" L x 58" H
Belt Size: 48" L x 6" W x 12" D
Motor: 1-1/2 hp TEFC, 120/240V, 60 Hz
Table Size: Belt, 14-3/4" x 7-3/8"; disc, 16-1/4" x 11-3/4"
Dust Port: 4"
|
|
|
16-32 Plus Drum Sander (JET) Lot #632 (Sale Order 632 of 1039) Self-cooling and precision machined, with balanced, extruded aluminum drum
Continuous duty motor allows heavier use for longer periods.
Precision-flattened reinforced steel conveyor bed
No-give power feed conveyor belt
Zinc plated steel tension rollers mount next to the drum
Drum height and downward pressure are adjustable, eliminating snipe
Height adjustment handle allows both radical changes and minute adjustments for extremely precise sanding thickness control
Infinitely variable feed rate from 0 to 10 feet per minute for surface, dimension and finish sanding
Minimum of 400 to 600 CFM dust collection recommended
Minimal assembly required
Drum ball bearings are sealed and permanently lubricated
20-amp service required
Overload protected power switch located on front of machine base for easy access
Standard equipment includes one 80-grit abrasive strip, one 100-grit abrasive conveyor belt, JET TufTool, trackers, metal stand with shelf, one box ready-to-wrap abrasives and dust port
Product Specifications
Net Weight: 145 lbs.
Drum Speed: 1,725 rpm
Thickness: 3" max., 1/32" min.
Drum Bearings: Two 1"
Dimensions: 18" H x 23" W x 32" D
Feed: 0-10 ft. per min.
Conveyor Motor: 43 in.-lbs. torque, direct drive, DC, infinitely variable
Drum: 5" x 16"
Dust Port: 4" dia. plastic
Capacity: 32" W max.; 2-1/4" L min.; 3" max. th.; 1/32" min. th.
Motor: 1-1/2 hp TEFC, 1 ph., 110-120V
|
|
|
2" x 72" Multi-Purpose Sander (Kalamazoo) Lot #633 (Sale Order 633 of 1039) For grinding, shaping, snagging, roughing, flat work, contouring, angles and curves
Platen rotates 360 degrees for many different styles of sanding
1-1/2 and 3-inch contact wheels (with a 5-inch wheel option)
Tilting cast-iron table with slot (shown without table)
Product Specifications
Wheel Dia: Contact wheels, 1-1/2", 3"
Warranty: 1 year
Type: Stand included
Motor: 1 hp TEFC, 1 ph., 110V
Speed(s): 3,450 rpm
Table Size: 8" x 5"
|
|
|
20" Disc Sander/Grinder (WT Import) Lot #634 (Sale Order 634 of 1039) Features a 45-degree tilt table.
Product Specifications
Table Tilt: 45°
Table Height: 30"-38" to floor
RPM: 1,725
Net Weight: 397 lbs.
Base: 22" sq.
Motor: 2 hp, 3 ph., 220V
Size: 20" disc
Table Size: 14-1/2" x 27-1/2"
|
|
|
3/4 HP Oscillating Spindle Sander Lot #635 (Sale Order 635 of 1039) Powerful 1/3-horsepower motor quickly removes material
Large work table provides ample workpiece support
Integrated dust collection provides cleaner operation
Dual action spindle simultaneously spins and oscillates 5/8 inch for fast, burn-free sanding
Sturdy base with pre-drilled holes for bench mounting
Dust collection outlet for vacuum pickup
Storage on base for rubber sanding drums, sanding sleeves and spacer rings
Lock-off switch with removable key
Includes rubber sanding drums, sizes 3/4, 1, 1-1/2, 2 and 3 inches in diameter; sanding sleeves in sizes 1/2, 3/4, 1-1/2, 2 and 3 inches in diameter; and spacer ring inserts for 1/2-, 3/4-, 1-, 1-1/2-, 2- and 3-inch sleeves
Product Specifications
RPM: 1,790
Motor: 1/3 hp, 2.4 amps, 120V AC
Table Area: 20" x 14"
Spindle: 1/2"
|
|
|
4" Belt & 6" Disc Sander Lot #636 (Sale Order 636 of 1039) Weighing only 48 pounds, this sander is portable and easy to carry! Other features:
4-by-36-inch belt tilts and locks at any angle from 0 to 90 degrees
Belt is easily removed or tension adjusted with accessible spring lever
Removable backstop
Machined cast iron fence for support work when using belt
Belt speed 2,000 feet per minute
Disc sander runs at 3,390 rpm
Table tilts and locks at any angle from 0 to 45 degrees (ideal for bevel sanding)
5-by-8-1/4 inch machined cast aluminum locking work table; removable for either disc or belt use (includes miter gage)
Product Specifications
Net Weight: 48 lbs.
Overall Dimensions: 12-1/2"H x 20-1/2"L x 15"W
Belt Speed: 2000 ft./min.
Table Area: 5" x 8-1/4
RPM: 3,390 (disc)
Belt Length & Width: 4" x 36"
Motor: 1/3 HP, 120V
|
|
|
6" x 48" Belt & 12" Disc Sander (JET) Lot #637 (Sale Order 637 of 1039) Belt sander operates horizontally and vertically and can be locked at any angle in between
Both sanding tables have positional stops at 90 and 45 degrees for quick reference
Belt tracking adjustments are easily made with exclusive dual thumbscrews
Belt guard designed for full usage of the 6-inch belt width and length
Two precision ground cast iron tables with miter gage slots
Exclusive design single dust port base collects majority of dust produced by both sanders before it becomes airborne
Closed stand with built-in casters
Standard equipment includes a backstop for horizontal mode, miter gage, sanding belt, sanding disc and dust chute
Product Specifications
Table Tilt: Belt table, 45° down, 20° up; disc table, 45° down, 25° up
Net Weight: 210 lbs.
Motor: 1-1/2 hp, 1 ph., 115/230V, prewired 115V
Belt Speed: 2,500 sfpm
Dust Port: 4"
Disc Diameter: 12"
Belt Size: 6" x 48"
|
|
|
6" x 48" Finishing Machine (Wilton) Lot #638 (Sale Order 638 of 1039) This sander will handle virtually all the finishing operations in a production line. The powerful 1.5-horsepower motor provides optimal speed of 3,260 sfpm and has a push-button switch.
Table tilts for all angle finishing operations
Adjustable dust deflector and dust chute
Completely enclosed drums
Guarded sanding belt
Fine thread adjustment for simple and easy belt tracking
Plain and compound miters are easily obtained by using the standard die-cast aluminum miter gage
Belt head adjusts vertically, horizontally and in between
Adjustable, heavy-duty, cast iron, removable platen
Removable upper guard for contour finishing
Variable-position locks
Product Specifications
Motor: 1-1/2 hp TEFC, 1 ph., 115/230V, push button switch; prewired 115V
Net Weight: 211 lbs.
Table Tilt: 45° out, 20° in
Belt Size: 6" W x 48" L
Belt Speed: 3,260 sfpm
Table Size: 7-3/8" x 14-3/4"
Platen: 6-1/4" x 14-3/4" 6-1/4" x 14-3/4"
Warranty: 2-year limited
Dimensions: 25-1/2" W x 19" D x 57-1/2" H
Miter Gage Groove: 3/8" x 3/4"
|
|
|
9" Disc & 6" x 48" Combination Sander (JET) Lot #639 (Sale Order 639 of 1039) Powerful 3/4-horsepower motor runs both sanders with plenty of power to complete even the heaviest of jobs
Large cast iron table has preset stops at 90 and 45 degrees to use the belt sander vertically, horizontally or anywhere in between
Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
Graphite covered steel platen runs cooler, increasing machine and belt life
Specially designed belt guard allows full use of the 6-inch belt width and length
Drive drum is rubber-coated for a better grip on the sanding belt, resulting in less slippage
Tracking adjustment knob with quick-lock handle keeps belt on track during use
Quick-release belt tension lever makes belt changes fast and easy
Quick-lock dust cover allows fast disc changes
Single 4-inch port on the back of the base collects dust effectively from both belt and disc sanders
Built-in handles for easier portability
Standard equipment consists of sanding belt and disc, miter gage and backstop for horizontal mode
Includes open stand, as shown in illustration
Product Specifications
Dimensions: 16" H x 29" L x 28-1/2" W
Table Tilt: Belt & disc tables, both 10° up, 45° down
Belt Speed: 2,258 sfpm
Motor: 3/4 hp TEFC, 1 ph., 115V, prewired 115V
Table Size: Belt table, 11" x 5-1/2"; disc table, 12" x 7-1/2"
Belt Size: 6" x 48"
Disc Diameter: 9"
Net Weight: 128 lbs.
Disc Speed: 1,725 rpm
Dust Port: 4" OD
|
|
|
Combo 1" x 30" Belt & 5" Disc Sander (WT Import) Lot #640 (Sale Order 640 of 1039) Includes belt, pressure sensitive adhesive disc and miter gage. Sand or polish any flat or irregular surface. Belt tensioning arm.
Product Specifications
Disc Diameter: 5"
Table Size: Belt, 5-1/8 x 5-1/8; disc, 3-3/4 x 7-1/8
Net Weight: 17 lbs.
Table Tilt: Belt, 45° down; disc, 45°
Motor: 1/4 hp, 1 ph., 2.6 amps, 120V
Dimensions: 14" L x 11" W x 14-1/2" H
Belt Length & Width: 1" x 30"
Disc Speed: 3,400 rpm
Belt Speed: 3,150 sfpm
|
|
|
Combo 6" Belt & 10" Disc Finishing Machine (Wilton) Lot #641 (Sale Order 641 of 1039) A versatile machine designed as an economical workshop tool. Applications include contour sanding, flat panel stock sanding, deburring, grinding and finishing.
This machine features:
6-by-48-inch belt and 10-inch disc
Two cast iron tilting tables for mitering applications
Full access to the belt when tilted in the horizontal position
Dust collection shrouds on belt and disc
Quick-release tension mechanism for quick, easy belt changes
Removable safety key switch
Enclosed base to protect motor from sanding dust
Floor stand (some assembly required)
Product Specifications
Belt Speed: 1,650 sfpm
Disc Speed: 2,100 rpm
Net Weight: 170 lbs.
Disc Diameter: 10"
Net Weight: 170 lbs.
Dimensions: 23" W x 26" D x 61" H
Belt Size: 6 x 48 belt
Table Area: Belt table, 6" x 10-1/2"; disc table, 7-1/2" x 13"
Table Tilt: 45° out
Table Slot: 5/8"
Warranty: 2-year limited
Motor: 1 hp, 1 ph, 115V
|
|
|
3" x 90" Belt Sanders (Kalamazoo) Lot #642 (Sale Order 642 of 1039) Heavy-duty, rugged and versatile
Multi-position through vertical
Direct drive
Built-in vacuum (option)
Air tensioning
Equipment includes 3-by-90-inch belt and 8-inch contact wheel
Requires 40 pounds of shop air
3-by-24-1/2-inch steel reversible platen
Manual switch - air gage with valve
One-year warranty
Product Specifications
Type: Built-in vacuum base
Wheel Dia: 8" contact wheel
Capacity: 6,900 sfpm
Warranty: 1 year
Net Weight: 295 lbs.
Motor: 2 hp, 3 ph.
Belt Length: 3" x 90"
|
|
|
Combination Belt & Disc Sander (Kalamazoo) Lot #643 (Sale Order 643 of 1039) Platen measures 6-1/2 by 14 inches
Manual switch with overload protection
Enclosed, built-in 100 cfm dust collector base with cartridge filter.
Quick-change belt
Pre-tensioned one lever belt change
Choose from single-phase or three-phase motors
Product Specifications
Net Weight: 500 lbs.
Disc Diameter: Aluminum; 12"
Motor: 3 hp TEFC, 3 ph., 220/440V
Dimensions: 12" L x 14" W x 60" H
Disc Speed: 2,500 rpm
Arbor: 5/8"
Belt Speed: 2,800 sfpm
Belt Size: 6" x 48"
Table Size: Belt table, cast iron, 6" x 10" w/1/2" x 1/8" slot; disc table, 8" x 14"
|
|
|
Deluxe Combo 6" Belt & 9" Disc Sander (WT Import) Lot #644 (Sale Order 644 of 1039) Adjustable position 6-inch belt performs multiple operations vertically, horizontally and any position in between
Belt tension easily micro-adjusted
Machined aluminum table is removable and can be used with both disc and belt sanders
Stand included at no extra cost
Product Specifications
Net Weight: 130 lbs.
Dimensions: 39" H x 29" L x 18-1/2" W
Table Size: 6-1/4" x 12-1/4"
Motor: 1/2 hp, 1 ph.
Disc Speed: 2,700 rpm
Belt Speed: 2,200 ft./min.
Tilt: Table, 0-45° Belt, 0-90°
Belt Length & Width: 48" x 6"
Disc Diameter: 9"
|
|
|
Deluxe Horizontal & Vertical Sanding Machine (WT Import) Lot #645 (Sale Order 645 of 1039) Includes heavy-duty stand. Sanding table can be adjusted from 0 to180 degrees, and miter gage from 45 to 90 degrees. Great for contour sanding. Belts for this machine available; please call for details.
Product Specifications
Table Size: 10" x 27"
Belt Size: 6" x 89"
Motor: 1-1/2 hp, 1 ph.
RPM: 3,900 linear
Net Weight: 225 lbs.
Dust Port: 4"
|
|
|
Heavy-Duty Combination Sander (Shop Fox) Lot #646 (Sale Order 646 of 1039) This sander tackles the toughest sanding operations. Unlike many belt-driven sanders that require adjustments, the Shop Fox® W1712 uses a direct ball bearing drive from the motor to the sanding disc and belt, to deliver a maintenance and vibration free positive torque flow.
Two precision-ground cast iron tables
For increased sanding versatility and control, both tables accept the included miter gage
Quick-change belt release
On/off toggle switch with safety key
Designed in cabinet-style stand with powder coat paint
Ball bearings are shielded and not exposed
Product Specifications
Dust Port: One 2", one 2-1/2"
Warranty: 2 years
Motor: 1-1/2 hp, 1 ph., 110V
RPM: 1,725
Belt Size: 6" x 48"
Belt Speed: 1,100 rpm
Disc Diameter: 6"
|
|
|
Industrial 6" Belt & 12" Disc Sander (WT Import) Lot #647 (Sale Order 647 of 1039) Heavy-duty sander and grinder. Belt operates and locks vertically, horizontally or any degree in-between while work table remains in level position. Includes two tables with slots and miter.
Product Specifications
RPM: 1,725 (disc)
Belt Speed: 5,000 ft./min.
Table Area: 7" x 12-3/4" (belt); 7-1/4" x 17-1/4" (disc)
Dimensions: 20" H x 20" L x 29" W
Net Weight: 160 lbs.
Table Tilt: 15-45° (belt), 0-45° (disc)
Motor: 1 hp, 1 ph.
|
|
|
Inflatable Drum Sander (WT Import) Lot #648 (Sale Order 648 of 1039) With 3- and 5-inch air inflated drums. Single speed.
Product Specifications
Spindle: 7/8"
Motor: 1 hp, 120V AC
Net Weight: 86 lbs
Drum: 7-7/8" L
Amp Rating: 43.3 startup; 7.7 unloaded; 23.7 unloaded
RPM: 3,585
Dimensions: 33-1/4" H x 15-1/2" L x 31-1/4" W
|
|
|
Oscillating Spindle Sander (WT Import) Lot #649 (Sale Order 649 of 1039) Quickly remove blade marks left by scroll saws, bandsaws and jigsaws
Get perfectly smooth contour and curve sanding
Table tilts for accurate, repeatable finishing -- great for table and chair legs
Includes 2- and 7/8-inch spindles
Oscillating stroke
Dust collection port
Product Specifications
Motor: 110V, 4.5 amps
RPM: 1,780
Net Weight: 73 lbs.
|
|
|
6" Universal Surface Grinder (WT Import) Lot #650 (Sale Order 650 of 1039) With jointer/planer and knife sharpener guide. Perfect for surface and cutter grinding. A wide range of correct relief and included angles can be achieved using the jointer and planer knives. The degree can vary from 30 to 60 degrees.
Product Specifications
Wheel Dim: Straight cup, 5-7/8" x 1-1/2" x 1/2" arbor vitrified bond
Net Weight: 50 lbs.
Dimensions: 12" H x 20" L x 10" D
Motor: 1/2 hp, 110V, 60 Hz, 1 ph., 8 amps
Table Tilt: 15°-90°
Blade Length: 20" max.
|
|
|
Benchtop Surface Grinder (WT Import) Lot #651 (Sale Order 651 of 1039) Features include a V-slide table, swarf guard, one-shot lubricator, diamond wheel dresser with holder and toolbox. Elevation graduations: .001 inch. Stand not included.
Product Specifications
Net Weight: 465 lbs.
Longitudinal Feed: 13-7/8" max.
Wheel: 7" dia. x 1/2"
Cross Travel: 8-1/2" max.
Height: Work, 8-3/4" max.
T-Slot: 1/2" x 15.5"
Motor: 3/4 hp, 1 ph., 110V, 60Hz, 5 amps
RPM: 3,450
Table Size: 6" x 12.5"
|
|
|
14" 4-Speed Woodcutting Bandsaw (WT Import) Lot #652 (Sale Order 652 of 1039) Table on four-speed bandsaw tilts 45 degrees for bevel cuts. Also includes 2-inch dust collector hookup, rip fence, blade and stand.
Product Specifications
Motor: 3/4 HP, 110V, single phase
Speed(s): 4 (590, 905, 1,436, 2,273 fpm)
Net Weight: 207 lbs.
Capacity: 5-1/2"
Throat: 14"
Table Size: 13-7/8" x 13-5/8"
|
|
|
14" Closed Stand Woodworking Bandsaw (JET) Lot #653 (Sale Order 653 of 1039) Rigid one-piece welded 16-gauge stand with wide stance; no assembly required
Motor totally enclosed and fan-cooled for long life
Completely prewired and featuring a unique quick connect motor-to-switch plug for easy setup
Upper blade guide micro-adjustments
V-groove blade guide bar for consistent alignment
Graphite impregnated polymer JET blocks in the blade guides for quicker setup and a cooler running blade
Extra large cast iron work table is offset for more area in front of the blade
Features include a 3/8-inch woodworking blade with 6 TPI; built-in 4-inch dust chute; full 6-inch under guide cutting capacity; and 12-1/2 inch blade to frame capacity
Product Specifications
Net Weight: 185 lbs.
Warranty: 2 years
Blade Speeds: 3,000 sfpm
Capacity: 6" H x 13-1/2" W
Motor: TEFC, 1 hp, 1 ph., 115/230V prewired 115V
Dimensions: 68" H x 26" W x 19" D
Table Tilt: 45°R, 10°L
Blade Size: 1/8"-3/4" W; 93-1/2" L
Table Size: 15" x 15"
|
|
|
14" Motorized Wood Cutting Bandsaw (WT Import) Lot #654 (Sale Order 654 of 1039) Full ball-bearing construction for smooth, quiet operation. Aluminum wheels. Table tilts 45° forward and 15° back. Mitre gauge included. Adjustable upper and lower blade guides. Complete with one 3/8"-6 TPI blade.
Product Specifications
Blade Width: 1/2"
Speed(s): 3,000 fpm
Table Size: 13-3/4 sq.
Height: 65-1/2"
Throat: 13-1/2"
Blade Length: 91.7"
Thickness of Cut: 6"
Motor: 1/2 hp, 110V
Net Weight: 176 lbs.
|
|
|
16" Woodworking Bandsaw (WT Import) Lot #655 (Sale Order 655 of 1039) New slope shape
Quick clamping lever and blade tension adjustment on the back of the machine
Precise, simple adjustment of cutting height or upper blade guide by using large-sized handwheels and rack system
Both upper and lower blade guide are molded on bearings to control the blade tracking
Two windows to show belt tension and blade running position
Large aluminum quick-change rip fence
Work table tilt is smooth and flexible
Product Specifications
Net Weight: 302 lbs.
Motor: 1-1/2 hp, 1 ph., 110V, 60 Hz, 110/220V prewired
Blade Size: 116" L, 1/4" W min., 3/4" W max.
Max Depth of Cut: 7-7/8"
Max Width of Cut: 14-3/4"
Blade Speeds: 1,970 fpm
Table Size: 19-5/8" x 15-1/2"
Table Tilt: 0-45°
|
|
|
18" Wood Bandsaw (WT Import) Lot #656 (Sale Order 656 of 1039) Cast iron frame; includes stand. Calibrated rip fence. With 45-degree miter gage. Adjustable upper and lower blade guides. Includes a 3/4-inch 6 TPI blade.
Product Specifications
Table Size: 18" sq.
Thickness of Cut: 8-3/4" max.
Blade Width: 1" max.
Blade Length: 121"
Table Height: 41-1/2"
Motor: 1-1/2 hp, 220V
Throat: 17-1/2"
Height: 75" w/stand
Net Weight: 400 lbs.
Table Tilt: 45° forward; 15° back
|
|
|
18" Woodworking Bandsaw (JET) Lot #657 (Sale Order 657 of 1039) Exclusive design quick release; precision T-square style rip fence with 6-inch steel re-saw attachment
Built-in cutting height scale; easy to read upper blade guide height
Extra large cast iron table with T-slot miter gage
Cast iron wheels are balanced and equipped with vulcanized rubber tires
Large front cast iron handwheels through worm gearbox and rack system on the guide post
Guides and support bearings adjust independently with micrometer accuracy
Large blade tension adjustment cast iron handwheel with tension indicator
Direct reading scale enables operator to select the exact tension for various blade widths from 1/8 to 1 inch
Trunnions are cradled by heavy-duty zinc alloy saddle
Quick lock knobs secure upper and lower hinged covers
Convenient single tracking adjustment knob
Lower wheel brush to eliminate sawdust buildup
4-inch dust port collection system
Standard equipment includes industrial push button switch and 3/4-inch bandsaw blade (4 TPI)
Product Specifications
Net Weight: 410 lbs.
Base: 22" W x 30.75" D
Blade Speeds: 3,000 fpm
Table Tilt: 45° R to 10° L
Motor: TEFC, 1-3/4 hp, 1 ph., 115/230V, prewired 115V
Blade Size: 1/8"-1" W; 137" L
Wheel Dia: 18-3/8"
Positive Stops: 90° & 45° R
Table Height: 37.5"
Capacity: 12-1/4" H x 18-3/8" W
Table Area: 19" x 19"
|
|
|
18" Woodworking Bandsaw (WT Import) Lot #658 (Sale Order 658 of 1039) New slope shape
Quick clamping lever and blade tension adjustment on the back of the machine
Precise, simple adjustment of cutting height or upper blade guide by using large-sized handwheels and rack system
Both upper and lower blade guide are molded on bearings to control the blade tracking
Two windows to show belt tension and blade running position
Large aluminum quick-change rip fence
Work table tilt is smooth and flexible
Product Specifications
Max Depth of Cut: 11-1/8"
Table Size: 19" x 21"
Net Weight: 485 lbs.
Max Width of Cut: 17-5/8"
Blade Size: 134" L; 3/8" W min; 1-1/4" W max.
Motor: 2 hp, 1 ph., 220V with brake function
Blade Speeds: 1,750/2,570 fpm
Table Tilt: 0-45°
|
|
|
Bench Bandsaw (WT Import) Lot #659 (Sale Order 659 of 1039) All the advantages of a full-sized bandsaw where space is an issue. Cast iron housing and table. Includes a protractor and a 56-by-1/4 inch blade.
Product Specifications
RPM: 1,720
Motor: 1/5 hp, 120V, 2.58 amps
Dimensions: 32-1/2" H x 17" D x 11-7/16" H
Capacity: 7-1/2"
Net Weight: 45 lbs.
Table Size: 11-7/16" sq.
Blade Size: 56" x 1/4"
|
|
|
16" Woodworking Bandsaw (JET) Lot #660 (Sale Order 660 of 1039) Dual tapered column design for greater rigidity and strength
Precision computer balanced wheels
Wide blade capacity for re-sawing large stock
Large cutting capacity
Superior dust collection pickup
Rack and pinion blade guide height adjustment
Dual locking doors
Powder coat finish
High quality bandsaw blades
Product Specifications
Wheel Dia: 16-5/8"
Table Height: 37-1/2" to floor
Blade Length: 123"
Table Tilt: 45" R x 10" L
Net Weight: 310 lbs.
Motor: 1-1/2 hp, 1 ph., 115/230V, prewired 115V
Capacity: 10" H; 16-3/8" W
Blade Speeds: 3,000 (5 fpm)
Blade Width: 1/8" W min., 1-1/4" W max.
Table Size: 17" sq.
Dust Port: 4" OD
|
|
|
Miter Saw Stand Lot #661 (Sale Order 661 of 1039) Tough, rugged, easy-to-use product designed with the professional in mind
Jobsite dependability with portable workshop convenience, at a price that won't break the bank
18-inch universal mounting rails fit even the largest miter saws
116-inch overall material support capacity
Comfortable 36-inch work height
43-3/4-by-8-3/4-inch work bed (top frame)
Heavy-duty contractor grade materials
500-pound capacity on main stand
Tough powder coat finish
Wide, stable 25-by-51-inch stance
(Saw shown not included.)
|
|
|
10-Piece Deluxe Paint Brush Set (WT Import) Lot #662 (Sale Order 662 of 1039) Sizes are two 1/2 inch; three 1-inch; three 1-1/2 inch; and one each 2 and one 2-1/2 inches.
|
|
|
5-Piece Paint Brush Set (WT Import) Lot #663 (Sale Order 663 of 1039) Brushes are 100 percent polyester and for use with all paints.
Product Specifications
Size: 1", 2", 2-1/2", 3" regular; 1-1/2" angled sash brush
|
|
|
Heavy-Duty Paint Mixer (WT Import) Lot #664 (Sale Order 664 of 1039) Use for paint, paste, mortar or roofing compound. Heavy-duty steel with enamel finish. Use with 3/8-inch or larger drills. Handy plastic hanger.
Product Specifications
Base: 2-1/4"
Length: 16"
Speed(s): 200-700 rpm
Size: 3/8" hex shank
|
|
|
Paint Can Hook (WT Import) Lot #665 (Sale Order 665 of 1039) Sturdy steel firmly holds cans while on the job.
|
|
|
2-Tier Plastic Utility Cart (Waterloo) Lot #666 (Sale Order 666 of 1039) With two shelves, molded-in handles, small parts organizers and polyethylene casters. Stain resistant for easy cleanup.
Product Specifications
Dimensions: 34-1/2" W x 17-1/2" D x 33-3/4" H
Color: Gray
Load Limit: 300 lbs.
Wheel Dim: 5" dia. x 1 W
|
|
|
3-Drawer Ball Bearing Utility Cart (Waterloo) Lot #667 (Sale Order 667 of 1039) Two full-extension split drawers
One full-length full-extension drawer with ball bearing slides
Drawers have liners and labels for attachment to drawer handles
Keyed lock for top compartment; drawers lockable with unique lock lever
Product Specifications
Warranty: 1 year
Wheel Dim: 3" x 1"
Size: 34" W x 20" D x 36" H
|
|
|
3-Drawer Stainless Steel Utility Cart (Waterloo) Lot #668 (Sale Order 668 of 1039) Three drawers with ball bearing slides and Posi-Latch latching system
Two rigid and two swivel casters
Internal locking system and tubular locks
Cover has stiffener; gas struts hold it open
Heavy-duty tubular side handle
Tool organization and bulk storage shelf
Rubber bumpers
Drawer liners included
Product Specifications
Wheel Dim: 5" dia. x 2" W
Load Limit: 750 lbs.
Dimensions: 34" W x 20-5/8" D x 36-3/4" H
|
|
|
4-Drawer Metal Utility Carts (Waterloo) Lot #669 (Sale Order 669 of 1039) Four drawers with ball bearing slides and Posi-Latch latching system
Two rigid and two swivel casters
Internal locking system and tubular locks
Cover has stiffener; gas struts hold it open
Heavy-duty tubular side handle
Tool organization and bulk storage shelf
Large die-cast steel nameplate
Rubber bumpers
Drawer liners included
Note: Black model shown; cart is also available in blue or red.
Product Specifications
Wheel Dim: 5" dia. x 2" W
Capacity: 1,000 lbs.
Color: Red
Dimensions: 38-3/4" W x 21-3/8" D x 44" H
|
|
|
4-Wheel Carts (WT Import) Lot #670 (Sale Order 670 of 1039) Capacity: 400 lbs.
Net Weight: 25
Dimensions: 18.5" W x 29" L
Height: Handle: 32"; Cart: 5-1/2"
|
|
|
Ball Bearing Utility Cart (Waterloo) Lot #671 (Sale Order 671 of 1039) Two tubular side handles built directly into the frame
Top shelf has full-length piano hinges
Full-extension drawer with ball bearing slides
Keyed locks for added security on top compartment and drawer
Drawers come with liners and labels for the handles
Product Specifications
Wheel Dim: 4" x 1"
Warranty: 1 year
Size: 30" W x 16" D x 35" H
|
|
|
Commercial Service Cart Lot #672 (Sale Order 672 of 1039) This 3-tier service cart includes (4) 4" hard rubber swivel casters (2 with brakes), (3) 32"L x 24"W x 3-1/4"D trays, and side handle. Overall height is 33". 300 lbs. load capacity. Weighs 55 lbs.
Product Specifications
Net Weight: 55 lbs.
Capacity: 300 lbs.
OAL: 32"L x 24"W x 33"H
|
|
|
Flat Shelf Plastic Utility Cart (Rubbermaid) Lot #673 (Sale Order 673 of 1039) Ideal for general factory, healthcare, retail, foodservice and office use
Versatile flat shelves designed for transport of oversized, bulky items
Sturdy structural foam construction won’t rust, dent, chip or peel like metal carts
All-plastic design provides easy maintenance and quiet operation
Large, non-marking casters reduce touch-up cleaning
Product Specifications
Size: 33-5/16" H x 43-7/8" L x 25-7/8" W
Capacity: 500 lbs. (250 lbs. per shelf)
|
|
|
Large 2-Tier Plastic Utility Cart (Waterloo) Lot #674 (Sale Order 674 of 1039) With two shelves, molded-in side handle, small parts organizers and polyethylene casters. Stain resistant for easy cleanup.
Product Specifications
Load Limit: 400 lbs.
Dimensions: 40-1/2" W x 25-3/4" D x 33-1/2" H
Color: Gray
Wheel Dim: 5" dia. x 1" W
|
|
|
Light-Duty Utility Cart (Rubbermaid) Lot #675 (Sale Order 675 of 1039) Versatile, durable carts perform a wide variety of tasks
Easy to clean smooth surfaces
Quiet casters and plastic construction help eliminate noise
User friendly, easy to grip handles
Large non-marking swivel casters
High style appearance with brushed aluminum uprights
Product Specifications
Size: 37-3/4" H x 33-5/8" L x 18-5/8" W
Capacity: 200 lbs. (67 lbs. per shelf)
|
|
|
Platform Truck (Rubbermaid) Lot #676 (Sale Order 676 of 1039) Built for durability and efficient mobility of heavy loads. Sturdy structural foam construction won’t rust, dent, chip, peel or splinter. Virtually maintenance free. Rubber casters.
Product Specifications
Dimensions: 36" L x 24" W
Capacity: 500 lbs.
Wheel Dim: 5" x 1-1/4"
|
|
|
Self-Dumping Hopper (Rubbermaid) Lot #677 (Sale Order 677 of 1039) Large capacity hoppers store and dump heavy loads with ease
Forklift capable for elevated dumping
Tilts a full 30 degrees below horizontal
Pull-release safety latch prohibits premature dumping
Rugged functional plastic body positioned on heavy-duty metal frame
Resists the rusting, denting and pitting that affect metal hoppers
Optional lid also available
ISO certified
Product Specifications
Capacity: 750 lbs.; 1/2 cu. yd.
Dimensions: 40" H x 55" L x 26-1/4" W
Color: Gray
|
|
|
Trades Cart (Rubbermaid) Lot #678 (Sale Order 678 of 1039) Moves productivity right to the worksite -- a total tool storage and mobile workbench system
Four compartmentalized boxes store assorted parts and hardware
Fully enclosed, lockable storage compartment helps keep tools and materials secure
Two storage bins hold essential hand tools and supplies
Cart moves easily over hard surfaces, through elevators and doorways
Flat surface at user-friendly height provides convenient work area
Product Specifications
Capacity: 330 lbs. (150 lbs. bottom shelf; 180 lbs. top)
Includes: 5" casters, 2 parts boxes, 4 parts bins
Size: 33-3/8" H x 38" L x 19-1/4" W
Wheel Dim: 5"
|
|
|
Utility Cart (Rubbermaid) Lot #679 (Sale Order 679 of 1039) Perfect for transporting equipment and heavy loads in any environment. Sturdy, structural foam construction won’t rust, dent, chip or peel. Rounded corners protect walls and furniture. Lightweight and maneuverable. Large non-marking casters.
Product Specifications
Capacity: 500 lb.
Size: 33-1/4" H x 45-1/4" L x 25-7/8" W
|
|
|
Utility Cart (Waterloo) Lot #680 (Sale Order 680 of 1039) With tubular side handle and shelves, shelves 2-6/16 inches deep.
Product Specifications
Wheel Dim: 4" x 1"
Size: 27" W x 18"D x 32" H
Warranty: 1 year
|
|
|
Pneumatic Platform Trucks (Akro-Mils) Lot #681 (Sale Order 681 of 1039) Roller bearing and/or ball bearing industrial duty casters.
Sockets standard one end
Removable metal handle
Deck heights may vary due to tire pressure
All steel, reinforced deck with smooth surface
All welded construction
Assembled and ready to use
Product Specifications
Height: Deck, 11-1/2"
Capacity: 1,200 lbs.
Size: 30" W x 60" L
Net Weight: 105 lbs.
Wheel Dim: 8"; two 4-ply swivel, two 4-ply rigid
|
|
|
ProCart Lot #682 (Sale Order 682 of 1039) Quickly and easily convert the ProCart™ to a flat-top or a box-top cart with one hand. Hinged side gates on both shelves flip up or down with different configurations. Compared to four post carts, loading and unloading oversized boxes on the ProCart's lower shelf is a snap with it's I-beam design. The ProCart is made of high density polyethylene structural foam. The panels are dent-resistant, rust-proof, and never need painting. Each shelf holds a hefty 200 lbs., totaling 400 lbs. maximum payload. It maneuvers smoothly on non-marking 5" wheels, with locking rear wheels. The optional 9-rail system and interchangeable AkroBins™ (sold separately) offer the ultimate solution in organization and storage. Gray color. Made in USA. Bins NOT included.
Product Specifications
OAL: 40"L x 19.5"W x 32"H
Size: Small
Warranty: 1 year limited
|
|
|
Industrial Service Carts (WT Import) Lot #683 (Sale Order 683 of 1039) Sixteen-gauge steel, with 3.25-inch deep tray with rolled edges. Rubber casters (two rigid and two swivel).
Product Specifications
Dimensions: 33" H x 36" L x 24" W
Capacity: 650 lbs.
Type: Large heavy-duty
|
|
|
Triple Trolley (Rubbermaid) Lot #684 (Sale Order 684 of 1039) Offers three ways to keep your work moving: upright position for pushing loads, angle position for pulling loads or fold the handle flat and use as a dolly
Allows easy carrying and efficient storage
Durable structural foam deck won't rust, dent or bend
Non-skid surface helps prevent load shifting
ISO certified
Product Specifications
Dimensions: 32.5" L x 20.5" W
Capacity: 400 lbs.
Color: Gray
Type: Standard duty
|
|
|
3/8" Load Binder (Peerless) Lot #685 (Sale Order 685 of 1039) While a lever binder is most commonly used, a ratchet binder provides the ability to properly secure a load that consists of a vehicle with a suspension system. Ratcheting down the load takes the "bounce" out that can occur while in transit. Grade 43 chain.
Product Specifications
Load Limit: 5,400 lbs.
Handle: 15.5"
Net Weight: 12.5 lbs.
|
|
|
Binder Chains Lot #686 (Sale Order 686 of 1039) Complete with clevis grab hook on each end. Transport Grade 70 chains are lighter, stronger and heat treated.
Product Specifications
Size: 5/16 x 20'
Load Limit: 4,700 lbs
Type: Transport Grade 70
|
|
|
Hand-Held Hoist Lot #687 (Sale Order 687 of 1039) Product Specifications
Lift: 5'
Capacity: 650 lbs.
|
|
|
Load Binder (Peerless) Lot #688 (Sale Order 688 of 1039) Makes load securing easy with chain take-up and locking. Ratchet binders provide an even easier take-up than a standard lever binder. Ratchet blue type finish.
Product Specifications
Chain Size: 3/8" Grade 43
Net Weight: 10.2 lbs.
Load Limit: 5,400 lbs.
Size: 5/16"-3/8" trade
|
|
|
600 Lb. Trailer Dolly (WT Import) Lot #689 (Sale Order 689 of 1039) Move trailers, boats and recreational vehicles. Extension handle for added support. 1-7/8-inch hitch ball size. Pneumatic knob type tires.
Product Specifications
Net Weight: 31 lbs.
Wheel Dia: 12"
Dimensions: Extended, 47-1/4" x 25-1/2" x 15-1/4"
Capacity: 600 lbs.
|
|
|
Appliance Hand Truck Lot #690 (Sale Order 690 of 1039) 550 lb. Capacity. Steel frame is padded to protect load. Strap keeps cargo secure. Stair crawlers. 8" x 2-1/2" rubber wheels. 59-5/8"H x 24"W OAL. Toe plate is 24"W x 5"D. Net weight 45 lbs.
|
|
|
Bucket Dolly Lot #691 (Sale Order 691 of 1039) This is the best bucket dolly available for professional use. With its low center of gravity -- the lowest on the market -- it is almost impossible to tip. Easily roll about buckets of water, grout or thin set.
The exclusive 5-inch diameter center hole accepts a 5-gallon bucket and can hold it at a 45-degree angle, making it easier to access material. It has five heavy-duty casters for easily moving and turning heavy buckets. The dolly has a reinforced design, molded plastic design.
Product Specifications
Wheel Dim: 2" dia.
Capacity: 125 lbs.
|
|
|
Combination Drum & Hand Truck (USA) Lot #692 (Sale Order 692 of 1039) Can be used as a hand or a drum truck. Chime hook works with 55- and 30-gallon drums. Curved frame accommodates 5-gallon pails and kegs.
Product Specifications
Capacity: 800 lbs. max.
Wheel Dim: 8" x 2"
Dimensions: 15" D
|
|
|
Deluxe Drum Cradle (USA) Lot #693 (Sale Order 693 of 1039) Tips, drains, stores, rotates and moves 30- or 55-gallon steel and fiber drums
Dual telescoping wood handles allow easy two-handed control and offer a good gripping surface for cold weather usage
Polyolefin wheels for easy transportation over seams and expansion joints in floors
Optional drip trays
Product Specifications
Net Weight: 50 lbs.
Wheel Dim: 4" x 1.25"
Capacity: 1,000 lbs.
|
|
|
Double P-Handle Hand Truck (WT Import) Lot #694 (Sale Order 694 of 1039) Tough steel construction with reinforced welds for strength. High visibility orange enamel coating.
Product Specifications
Wheel Dim: 10" x 3"
Capacity: 600 lbs.
Dimensions: 19" D x 21.5" W x 51" H
|
|
|
Drip Tray Kit (Wesco) Lot #695 (Sale Order 695 of 1039) Steel slide out tray is 9.75 inches square with 1.75-inch lip. Fits Wesco drum cradle, order no. 4098-0045. Polyethylene pan. Cellulose absorbent holds 3 quarts of liquid. Net weight is 7.3 pounds.
|
|
|
Drum Cart Lot #696 (Sale Order 696 of 1039) All welded construction for 30 and 55 gallon drums. 3" swivel hard rubber wheels. 900 lb. load capacity. Made in USA. Can be shipped UPS.
Product Specifications
Net Weight: 25 lbs.
Capacity: 55 gal
|
|
|
Drum Dolly Lot #697 (Sale Order 697 of 1039) Transports 30 and 55-gallon drums with ease. Adjustable clip keeps the drum in place. Kick stand permits upright storage. Heavy flat bar and tube assist in climbing curbs. 1-5/16" OD tube frame. Moldon wheels measure 10" x 2.5" with 1" roller bearing. 1200 lb. capacity. Made in USA.
Product Specifications
Wheel Dim: 10" x 2.5"
Capacity: 1200 lbs.
|
|
|
Drum Rack Lot #698 (Sale Order 698 of 1039) These two-drum racks allow for easy handling and storage of drums, while saving storage space. Heavy-duty welded steel construction. Racks are accessible with a fork truck from all sides. Curved feet allow stacking of 10 drums five rows high.
Product Specifications
Capacity: 1,600 lbs. per rack
Size: 10" H x 45.5" W x 28" L
|
|
|
Industrial Hand Truck (WT Import) Lot #699 (Sale Order 699 of 1039) Long, heavy channel stair climbers. Cross bars are welded on front and back. Roller bearings.
Product Specifications
Nose: 9" x 14" x 3/16"
Capacity: 300 lbs.
Height: 45-3/4"
Wheel Dim: 10" x 2-3/4" pneumatic
Width: 20" overall
Net Weight: 45 lbs.
|
|
|
Mobile Base (WT Import) Lot #700 (Sale Order 700 of 1039) Fully adjustable from 18 by 24-1/2 inches up to 28-1/2 by 33-1/2 inches. Includes twin cam lifts, eight U-channel bars, two leveling feet, two rigid heavy-duty casters and two swivel casters on cam lifts.
Product Specifications
Net Weight: 40 lbs.
Capacity: 1,200 lbs
|
|
|
Mobile Base Cart (HTC) Lot #701 (Sale Order 701 of 1039) With HTC's universal mobile bases, size is no longer an issue! Each base features side rails and corner pieces with holes spaced every 1 inch to ensure a perfect fit to your machine. With four heavy-duty wheels.
Product Specifications
Capacity: 400 lbs.
Dimensions: Square, 36" max.; rectangle, 30" x 42" or 20" x 52" max.
Wheel Dim: 3"
|
|
|
Mobile Base for 14" JET Bandsaw Lot #702 (Sale Order 702 of 1039) Exclusive three-point leveling system provides a solid, stable stance
Two straight locking casters
Joint swivel caster is lockable, with a convenient foot lever
Built from solid steel tube with heavy-duty casters for long life and added durability
Powder coat finish is about 30 times more durable than a standard painted one
Product Specifications
Net Weight: 20 lbs.
Fits: JET Model JWBS-14CS bandsaw
Dimensions: 14-3/4" L x 17-1/4" W
|
|
|
Mobile Base for JET 6" Closed Stand Jointer Lot #703 (Sale Order 703 of 1039) For use with JET Model JJ-6CSX jointer (order no. 2005-0100). Make your machine movable.
|
|
|
Mobile Base for JET Closed Stand Shaper Lot #704 (Sale Order 704 of 1039) Mobile base for use with JET closed stand shaper, Model JWS-22CS (order no. 2005-0180). Make your machine movable.
|
|
|
Rolling Knee Pads Lot #705 (Sale Order 705 of 1039) Say goodbye to pain due to confined circulation, as well as to knee and lower back pain. No impact on knees or back, and no constant pressure on toes. Comfortable 1/2-inch padding.
Product Specifications
Type: Complete dolly
|
|
|
Universal Dolly Lot #706 (Sale Order 706 of 1039) Great for carting tile, marble and stone or to move appliances, furniture and heavy objects. Made of 1/2-inch thick star board with four sturdy 2-inch casters.
Product Specifications
Capacity: 300 lbs.
|
|
|
Industrial Hand Trucks (Akro-Mils) Lot #707 (Sale Order 707 of 1039) Welded steel construction. Long, heavy channel stair climbers. Cross bars are welded on front and back. Roller bearings.
Product Specifications
Capacity: 700 lbs.
Width: 20" overall
Net Weight: 42 lbs.
Wheel Dim: 8" x 2" mold-on rubber
Height: 45"
Nose: 9" x 14" x 3/16"
|
|
|
Wood Dollies Lot #708 (Sale Order 708 of 1039) Strength and reliability at an economy price. This dolly is constructed from select kiln-dried hardwoods to prevent warping and shrinkage. Boards are cut and planed to 7/8 inch with guaranteed consistent quality. Rails are 4 inches wide. Four 3-inch polyolefin swivel casters offer 900 pounds capacity. Shipped fully assembled.
Product Specifications
Net Weight: 16 lbs.
Size: 24" W x 36" L x 5.5" H
Type: Regular duty
Capacity: 900 lbs.
|
|
|
500 lb. Lever Hoist (WT Import) Lot #709 (Sale Order 709 of 1039) Single fall. Chain diameter of 4 millimeters. Complete with two hooks with safety latch.
Product Specifications
Net Weight: 5 lbs.
Chain Size: 4 mm
Capacity: 500 lbs.
Lift: 5'
|
|
|
JLP Series Lever Hoist (JET) Lot #710 (Sale Order 710 of 1039) All-purpose lever hoist features impact resistant steel construction with durable powder coat finish
Designed to pull, lift, drag or stretch in heavy-duty construction or industrial applications
Easy-to-use one hand operation and control
Freewheeling feature without load for quick positioning of slack chain
Lever hoist will not freewheel when under load
Simple design makes routine inspection or maintenance quick and easy
Reinforced stamped steel handle with comfortable rubber grip
Induction hardened, corrosion resistant grade 80 low wear chain
Completely enclosed Weston type automatic brake system holds load in any position
Drop forged safety hooks with durable latches swivel 360 degrees for easy rigging
Proof tested and certified
Complies with OSHA, ANSI/ASME B30.21 and HST-3M standards
Product Specifications
Net Weight: 59 lbs.
Type: 15' lift
Lift: 5/8" per lever turn
Length: lever, 16-1/8"
Pull (lbs): 72 lbs.
Lift Height: 15 ft.
Dist Bet Hooks: 19-3/4"
Capacity: 3 tons
Chain Size: 10 mm dia.
|
|
|
LV Classic Series Lever Chain Hoist Lot #711 (Sale Order 711 of 1039) A rugged, dependable lever chain hoist with capacities and features that make it ideal for all industrial lifting, pulling and positioning applications. Enhances safety-forged steel alloy load hooks have wide throat openings with slip resistant barbed tips to better retain slings. Improved performance: minimal effort in compact design, heat-treated gears and pinions, 360° rotation handle needs only 15° handle movement to ratchet and position loads. A big plus in tight places. Responsive load control through six pinion gear teeth and a four pocket load sheave. Easy free-chaining operation. Single fall, 3 ton model for increased portability. Double reduction gearing for superior spotting characteristics. A comfortable slip-resistant rubber grip handle - even with a glove. Rugged construction: meets ASME B30.21 and HST-3M design and performance standards. High-strength, cold-formed, all stamped steel construction decreases weight while increasing external impact resistance. Open frame design for easy cleaning and inspection. Grade 100 alloy chain. Options include a plated load chain that provides corrosion resistance, aircraft handling free chain lockout kits, bullard bottom hooks for single fall models only, and non-standard lifts.
Product Specifications
Opening: 1.9"
Net Weight: 2.38 (chain wt.)
Rated Load: 77 lbs.
Height: 23.2" hook-to-hook
Depth: 9.3"
Chain Size: 9.0 x 27.2 load (mm)
Width: 7.6"
Handle: 14.2"
Capacity: 6 metric tons (13,200 lbs.)
Lift: 5 ft.
Chain Falls: 2
|
|
|
Lever Hoists (WT Import) Lot #712 (Sale Order 712 of 1039) Handle: 16"
Net Weight: 25 lbs.
Dist Bet Hooks: 15"
Capacity: 1-1/2 ton
Lift: 5' standard lift
|
|
|
Tractel Mini Bravo Hoist Lot #713 (Sale Order 713 of 1039) Chain Size: 4mm x 12mm
Chain Falls: 1
Capacity: 500 lbs.
Lift Weight: 57 lbs.
Lift Range: 5'
|
|
|
5,500-Pound Capacity Pallet Truck Lot #714 (Sale Order 714 of 1039) Compact construction, attractive design, easy manipulation and smooth lifting
Entry roller wheel that rolls over pallet boards
Large nylon wheels with "ball thrust" steering
Reinforcement bars in each fork
Tapered fork ends and nylon rollers permit easy entry and exit of pallets
Lift load with short pumping strokes; lower with light pressure on fingertip control, or use the versatile foot pedal.
Brake safety spring loaded loop handle allows load to be lowered while in motion to act as a brake
Product Specifications
Net Weight: 180 lbs.
Fork: Height raised, 8", lowered, 3.5"; dimensions, 48" L x 6" W
Length: 57"
|
|
|
Adjustable Fork Deluxe Pallet Truck (Wesco) Lot #715 (Sale Order 715 of 1039) A Wesco® exclusive! One truck will do the work of two. Patented adjustable fork width design that can be set from 21 to 27 inches, or anywhere in between. Just loosen and reset front and rear adjusting bolts. FOB factory.
Other features:
Pump overload bypass
Rubber coated handle
Adjustable fork tie rods
Five-year pump warranty
Mold-on 7-inch polyurethane steering wheel with 200-degree steering
Mold-on 3-inch polyurethane load wheels
Exit rollers
Tapered fork tips
8-gauge, 6-inch wide reinforced forks
Product Specifications
Capacity: 5,500 lbs.
Height: 7.75" raised, 3" lowered
Dimensions: Forks, 21"-27" W x 46" L
Net Weight: 180 lbs.
|
|
|
High Lift Pallet Truck (JET) Lot #716 (Sale Order 716 of 1039) Designed to fit and transport skids or open-style pallets with ease
Great for use as a mobile work station to reduce lifting injuries
Heavy-duty steel frame with tough powder coat finish
Powerful two-stage hydraulic pump may be operated by steering handle or convenient foot pedal
Pump also features quick-lifting action with no load
Top-of-stroke and safety overload bypass system prevents damage to hydraulic pump
Wheel bearings are double-sealed and lubricated for life
Rounded fork tips for trouble-free pallet entry and exit
Large ergonomic cushion grip handle with fingertip controls
Automatic floor brake engages when forks are raised
Product Specifications
Height: Fork, 3-3/8" min, 32" max.
Capacity: 2,200 lbs.
Fork: Overall, 45" x 27"'; indiv. fork, 6-1/4" W
Wheel Dim: Load wheels, 3" x 2" nylon; steer wheels, 7" x 2" poly/steel
Load Center: 26-3/4"
|
|
|
Pallet Truck with Digital Electronic Scale (WT Import) Lot #717 (Sale Order 717 of 1039) Digital display in pounds or kilograms and has accuracy of ±1 kilogram (2.2 pounds) for 2,000 kilograms (4,410 pounds). Display uses two C size cell or rechargeable batteries. Charging cord is included, but not batteries. With nylon polyurethane rubber steering wheel.
Product Specifications
Net Weight: 290 lbs.
Capacity: 4,500 lbs.
Fork: 27" W x 48" L
Height: Fork, 3-7/16" min.; 7-7/8" max.
Roller: Single/tandem nylon polyurethane
|
|
|
W Series Premium Pallet Trucks Lot #718 (Sale Order 718 of 1039) Ideal for warehouses, supermarkets, distribution centers, factories, stockrooms, storage facilities and loading docks
Engineered to provide years of trouble-free service, even under the toughest working conditions
6,000-pound capacity
200-degree turning radius provides room to maneuver in tight quarters
Articulating 7-inch poly-over-aluminum steer wheels ensure continual contact with uneven floors
One-piece cast pump features high quality seals; hardened overload safety bypass valves
Pump also features a special smooth-lowering valve for controlled descent
Wheel bearings double-sealed and lifetime lubricated
Product Specifications
Wheel Dim: 2-7/8" x 3-11/16"
Dimensions: 48" L x 27" W
|
|
|
3-Drawer Heavy-Duty Bench (Waterloo) Lot #719 (Sale Order 719 of 1039) 1.25-inch thick work surface with 1,242 square inch work area
Ball-bearing drawer slides
Pegboard sides for hanging extra-long tools
Extra-wide legs for 1,450 lb. load support
Extra-wide drawer to store large tools
Five-year warranty
ISO certified
Product Specifications
Warranty: 5 years
Net Weight: 100 lbs.
Capacity: 17,941 cu. in.
Drawers: (1) 22.37" W x 16.46" D x 4.16" H; (2) 11.75" W x 16.46" D x 4.16" H
Size: 54" W x 23" D x 37.25" H
Load Limit: Bench, 1,450 lbs.; drawers, 50 lbs. each
|
|
|
4-Drawer Heavy-Duty Bench (Waterloo) Lot #720 (Sale Order 720 of 1039) Ball-bearing drawer slides with 35-pound load capacity per drawer
Pegboard sides for hanging extra-long tools
1.25-inch thick work surface with 1,440 square inch work area
Extra-wide legs for 1,450 pounds load support
Bulk storage area with lockable door
Five-year warranty
ISO certified
Product Specifications
Capacity: 16,555 cu. in.
Load Limit: Bench, 1,450 lbs.; drawers, 50 lbs. each
Size: 60" W x 24" D x 37.25" H
Drawers: (2) 22.37" W x 16.46" D x 4.16" H; (2) 22.37"W x 16.46"D x 6.32"H
Net Weight: 130 lbs.
|
|
|
4-Drawer Work Center (Waterloo) Lot #721 (Sale Order 721 of 1039) Full-extension ball bearing slides operate smoothly and emphasize quality
Durable top with molded-in tool holders and parts storage
Built-in battery charger dock
UL-approved three-outlet strip with reset
Casters allow for easy mobility
Five-year warranty
ISO certified
Product Specifications
Wheel Dim: 4-1/2" x 1-1/2"
Size: 31.5" W x 21.8" D x 28" H (33.6" H w/casters)
Drawers: 4
Load Limit: 50 lbs. per drawer
Capacity: 6165 cu. in.
Net Weight: 102 lbs.
|
|
|
5-Drawer Work Center (Waterloo) Lot #722 (Sale Order 722 of 1039) Full-extension drawer slides for easy access to tools
Large work surface with built-in storage for small parts and tools, and cord wrap side handle
Casters for easy mobility (two swivel with toe brakes)
ISO certified
Product Specifications
Size: 34.4" W x 19.2" D x 28.2 "H (32.3" H w/casters)
Capacity: 8269 cu. in.
Net Weight: 68 lbs.
Warranty: 5 years
Drawers: 5
Wheel Dim: 4" x 2"
|
|
|
5-Drawer Work Center with Back Wall (Waterloo) Lot #723 (Sale Order 723 of 1039) Drawers equipped with full-extension ball bearing slides
Powered back wall with built-in overhead fluorescent light
Two three-outlet power strips and one outlet at rear of back wall
Built-in battery charger dock
Detachable parts bins and shelves
Pegboard storage
Galvanized steel work surface
Casters allow for easy mobility
ISO certified
Product Specifications
Warranty: 5 years
Wheel Dim: 4-1/2" x 1-1/2"
Load Limit: 50 lbs. per drawer
Net Weight: 130 lbs.
Capacity: 9,276 cu/in.
Drawers: 5
Size: 38.1" W x 23.4" D x 53.2" H (58.7" H w/casters)
|
|
|
7-Drawer Heavy-Duty Bench (Waterloo) Lot #724 (Sale Order 724 of 1039) 1.25-inch thick work surface with 1,440 square inch work area
Extra-wide legs for 1,450-pound load support
Ball-bearing drawer slides with 50-pound load capacity per drawer
Pegboard sides for hanging extra-long tools
Large capacity drawer for bulky items
Five-year warranty
ISO certified
Product Specifications
Capacity: 11,802 cu. in.
Size: 60" W x 24" D x 37.25" H
Net Weight: 128 lbs.
Drawers: 7
Load Limit: Bench, 1,450 lbs.; drawers, 50 lbs. each
|
|
|
Open Style Shop Desk (Edsal) Lot #725 (Sale Order 725 of 1039) Writing surface and storage space for receiving and shipping clerks, watchmen and checkers. Roomy pencil and paper compartments. Sloping top is 43 inches high at front. Drawer has lock.
Product Specifications
Drawers: (1) 24" W X 28" D x 3-1/2" H
Size: 34-1/2" W x 30" D x 53" H
Color: Gray
|
|
|
Shop Desk with Cabinet (Edsal) Lot #726 (Sale Order 726 of 1039) Writing surface on top for shipping and receiving clerks, watchmen or checkers. Storage area beneath with a wide variety of uses. Door has T-handle and built-in lock with key.
Product Specifications
Drawers: (1) 32" W x 28" D; (1) 24" W x 28" D x 3-1/2" H
Dimensions: (Outside) 34-1/2" W x 30" D x 53" H
Color: Gray
|
|
|
"GTO" Great Tool Organizer Lot #727 (Sale Order 727 of 1039) The original GTO contains three levels of storage
Tub is sized to hold most drills and many small power tools
Tote tray allows for easy access to hand tools
Compartments in top tray for organizing small parts and supplies
Tote and top tray have molded handles
V-groove in lid holds pipes and dowels for sawing
One-year warranty
ISO certified
Product Specifications
OAL: 16"W x 9"D x 12.5"H
Capacity: 938 cu/in.
|
|
|
13" Plastic Toolbox (Waterloo) Lot #728 (Sale Order 728 of 1039) Flat top design makes box stackable
Compact size for a variety of storage uses
Removable plastic tray for organizing small tools and supplies
One-year warranty
ISO certified
Product Specifications
Capacity: 392 cu. in.
Size: 13" W x 6.5" D x 5.5" H
Color: Black & yellow
|
|
|
16" Plastic Toolbox Lot #729 (Sale Order 729 of 1039) Flat top design makes box stackable
Two steel latches
Removable plastic tote tray for organizing small tools and supplies
Durable design
Comfort grip handle
One-year warranty
ISO certified
Product Specifications
Size: 16"
OAL: 16.75"W x 7.5"D x 7.5"H
Net Weight: 3 lbs.
|
|
|
20" Mechanic's Portable Steel Toolbox Lot #730 (Sale Order 730 of 1039) Most popular size for professional portable storage
Heavy-duty tote tray provides additional organization
Dual heavy-duty rust-resistant latches
Comfort-grip handle for easy lifting and moving
Full-length piano hinge
Lockable with padlock (not included)
One-year warranty
ISO certified
Product Specifications
Net Weight: 10 lbs.
Size: 20.06" W x 8.03" D x 9" H
Capacity: 1,407 cu. in.
Color: Red
|
|
|
20" Plastic Toolbox (Waterloo) Lot #731 (Sale Order 731 of 1039) Two steel latches mean extra strength while carrying box
Removable tote tray for organizing small tools and supplies
Durable design and lightweight
Comfort-grip handle for ease in carrying
Plastic portables do not dent, rust or mar other surfaces
Flat top design makes box stackable
One-year warranty
ISO certified
Product Specifications
Size: 20" W x 8.5" D x 8.75" H
Capacity: 1,103 cu. in.
Net Weight: 4 lbs.
|
|
|
20" Portable Chest (Waterloo) Lot #732 (Sale Order 732 of 1039) Mar-resistant feet prevent surface damage
Two full-extension drawers for organization and easy access
Generous top storage area
Fully lockable chest for security
Comfort-grip handle for easy lifting and moving
Dual heavy-duty rust-resistant latches
"Topper" molded parts storage and organization
One-year warranty
ISO certified
Product Specifications
Size: 20.8" W x 8.9" D x 11.15" H
Capacity: 1,342.98 cu. in.
Drawers: 2 (17.8" W x 7.4" D x 2.2" H)
Regular Price $64.95
Ship Weight 18.00 lbs.
Quantity
Tell a Friend!
Origin
Model PCH2025
Part Number 8101-2025
Master Catalog Page: 660
|
|
|
22" Plastic Toolbox (Waterloo) Lot #733 (Sale Order 733 of 1039) Plastic will not dent, rust or mar other surfaces
Flat top design makes box stackable
Two steel latches for extra strength while carrying box
Steel handled tool tray for organizing small tools and supplies
Durable design and light weight
Comfort grip handle for ease in carrying
One-year warranty
ISO certified
Product Specifications
Capacity: 1,509 cu. in.
Net Weight: 6 lbs.
Size: 21.8" W x 9.5" D x 9.6 H
|
|
|
24" Tradesman Steel Toolbox Lot #734 (Sale Order 734 of 1039) More capacity for larger tools
Center hasp and staple accept padlock for security
Dual heavy-duty rust resistant latches
Full-size metal tote for additional organization
Comfort grip handle for easy lifting and moving
Full-length piano hinge
One-year warranty
ISO certified
Product Specifications
Capacity: 1,688 cu. in.
Net Weight: 11 lbs.
Size: 24.06" W x 8.03" D x 9" H
|
|
|
3-Drawer Portable Chest (Waterloo) Lot #735 (Sale Order 735 of 1039) "Front foot" design stabilizes box when drawers are opened
Large comfortable center handle and molded-in grips on sides
Storage pockets in cover to hold small parts while working on projects
Dual heavy-duty rust-resistant steel latches for total security
Shell of heavy-duty high-impact polypropylene resin with molded-in color that will not dent or mar other surfaces
Generous top storage area
Three durable steel drawers with full-extension slides that lock when lid is closed
One-year warranty
ISO certified
Product Specifications
Net Weight: 15.6 lbs.
Capacity: 1,795.65 cu/in.
Drawers: 3 (17.8" W 7.4" D x 2.2" H)
Size: 23" W x 10.41" D x 13.39" H
|
|
|
30" Steel Carpenter's Portable Toolbox Lot #736 (Sale Order 736 of 1039) Extra wide for longer tools
Heavy-duty side handles with molded grips
Dual heavy-duty rust resistant latches
Full-size metal tote for additional organization
Comfort grip handle for easy lifting and moving
Full-length piano hinge
Lockable with padlock (not included)
One-year warranty
ISO certified
Product Specifications
Capacity: 2110 cu. in.
Net Weight: 14 lbs.
Size: 30.06" W x 8.03" D x 9" H
|
|
|
Heavy Canvas Tool Tote Lot #737 (Sale Order 737 of 1039) Has 16 small pockets and eight large ones. Tools pictured in tote not included.
Product Specifications
Size: Inside, 14" L x 6" W x 8" D
|
|
|
Heavy Steel Toolbox (WT Import) Lot #738 (Sale Order 738 of 1039) Large four-tray European-style cantilever toolbox
Ruggedly constructed of .8-millimeter heavy gauge steel
Padlock eye
Double handles
Hammered enamel finish
Color may vary
Product Specifications
Size: 16-3/4" L x 8" W x 8" D
Net Weight: 11 lbs.
|
|
|
Aluminum Tool Case Lot #739 (Sale Order 739 of 1039) Idea for computer and copier repair technicians, electricians, photographers and all professionals who depend on their tools for a living. Constructed from silver and black anodized aluminum. Features reinforced corners, combination locks, adjustable dividers, internal tool pouches and a shoulder carrying strap.
Product Specifications
Net Weight: 8.5 lbs.
Size: 18.5" L x 14" W x 6.5" H
Type: 2 pouches
|
|
|
Fork Trucks Lot #740 (Sale Order 740 of 1039) trucks from Toyota Industrial feature four-cylinder engine and pneumatic tires. Gasoline powered. Ninety-day warranty on parts. Propane conversion kit available. Trucks available as high mast up to 13 feet lift. Capacity: 6,600 lbs.
Net Weight: 10,141 lbs.
Wheel Dim: Front, 0.28 x 9-15; rear, 6.50-10, 5.00-8
Lowered Mast Height: 79"
Lift: 118"
Height: Overall at cage, 83-1/2"
Transmission: Standard or automatic
Dimensions: 108" L x 48" W
|
|
|
1/2-Ton Swivel Lifting Crane Lot #741 (Sale Order 741 of 1039) Capacity: 1,000 lbs.
Boom: 34-1/4" - 50-3/4"
Lift: 0" - 79-1/4"
Swivel Radius: 360°
Net Weight: 83 lbs.
|
|
|
Lightweight Chain Hoists (Import) Lot #742 (Sale Order 742 of 1039) These lightweight hoists are ideal for constantly moving your setup, such as rigging jobs and plant maintenance. Hoists are tested for 150 percent of rated load. Automatic brake holds the load in any position and allows jockeying. Drop forged swivel hook with lip for added safety.
Product Specifications
Lift: 10'
Dist Bet Hooks: 28-1/4" min.
Capacity: 5 tons
|
|
|
Load Leveler (WT Import) Lot #743 (Sale Order 743 of 1039) Makes engine installation and removal easier and faster
Fits all kinds of engines
Crank handle adjusts center of gravity
Heavy-duty steel
Includes two 40-foot galvanized chains
2-1/2 inch center link will work with most hoists and cranes
Product Specifications
Length: 20-3/8"
Capacity: 1,000 lbs.
|
|
|
R&M LoadMate Electric Chain Hoists Lot #744 (Sale Order 744 of 1039) LoadMate® hoists are designed to maximize productivity with fast installation, easy operation and built-in durability. R&M’s advanced design and manufacturing techniques ensure safe operation, consistent quality and longer component life. LoadMate saves maintenance, repair and downtime costs over its lifetime.
In addition, LoadMate electric chain hoists offer:
Compact design for low headroom and close trolley approaches
Precision gears for quiet operation and reliable long-term performance
Chain container
Plug-in push button pendant with E stop
Upper/lower limit switches
Overload device
Standard 15-foot lift
Two-year warranty
Availability of additional models
Product Specifications
Duty Class: H4
Net Weight: 71 lbs.
Speed(s): 16
Capacity: 2,000 lbs. (1 ton)
Motor: 230/460 V, 3 ph., 60 Hz
Reeving: Double
|
|
|
2,000 lb. Beam-Type Platform Scale (Import) Lot #745 (Sale Order 745 of 1039) We use these scales in all our stores! Three 500-, one 200- and two 100-pound weights included. Brass beam and safety front guard. Platform size 18 by 24 inches.
|
|
|
Aluminum Hydraulic Table Cart (WT Import) Lot #746 (Sale Order 746 of 1039) Lift or lower heavy cargo for ease in loading and unloading. Foot pedals for lifting and lowering. Smooth rolling plastic casters; two are locking.
Product Specifications
Wheel Dim: 3.5"
Lift: 8.25"-24.75"
Table Area: 24-5/8" L x 15" W
Net Weight: 38 lbs.
Capacity: 200 lbs.
|
|
|
Double Scissor Lift Table Lot #747 (Sale Order 747 of 1039) Ideal for lifting, positioning and transporting heavy materials around the shop, factory, warehouse or office
Ergonomic answer to preventing back injuries
Heavy-duty steel frame and table
Smooth rolling poly over nylon casters (two swivel and two fixed) with parking brake
Easy-to-use hydraulic foot pump raises table to multiple heights
Quick lifting action provides maximum pump protection
Patent pending pump release
Two-year manufacturer warranty
Product Specifications
Height: 13-9/16" min; 51-1/8" max.
Capacity: 770 lbs.
Table Size: 35-5/8" x 20-1/8"
Handle: 37-1/4" H
Strokes to Max Height: 21
Length: 45-3/4"
|
|
|
Electronic Weighing & Counting Scales (WT Import) Lot #748 (Sale Order 748 of 1039) Auto zero, setting and tracing
Switch among weighing, counting and percentage
Weight range selection function
Low power consumption design that is simple and serviceable
Power supply with AC or built-in DC rechargeable accumulator; 110 volts
High quality LCD display, with backlight for low light
High limit and low limit alarm functions
Product Specifications
Capacity: 66 lbs.
Graduations: (d) 6,000
|
|
|
Hand Hydraulic Lift Table (WT Import) Lot #749 (Sale Order 749 of 1039) Overall steel construction and industrial casters.
Product Specifications
Table Area: 32" L x 20" W
Capacity: 660 lbs. max.
Net Weight: 120 lbs.
Height: 30" max.
|
|
|
Hydraulic Stacker (JET) Lot #750 (Sale Order 750 of 1039) Economical and ergonomic way to handle standard 40-by-48-inch pallets
Works like a manual forklift to load or unload trucks or stock shelves
Heavy-duty welded steel frame with a durable powder coat finish
Powerful two-stage hydraulic pump features quick lift with no load; top-of-stroke and safety overload bypass system
Heavy-duty dual roller chain for exceptional strength
Swivel casters feature foot brake to prevent movement
Adjustable width forks and outrigger legs handle all pallet sizes
Two-year manufacturer warranty
Product Specifications
Handle: Force required at capacity, 85"
Capacity: 2,200 lbs.; pallets, 40" x 48"
Load Center: 20 lbs.
Lift Height: 59" max.
Strokes to Max Height: 44/70
Turning Radius: 360°; 50"
Load Center: 20 lbs.
Fork: Dimensions, 41-3/4" x 5-1/4" x 2-1/4"; min ht., 2-3/4"
|
|
|
Scissor Lift Table Lot #751 (Sale Order 751 of 1039) Ideal for lifting, positioning and transporting heavy materials around the shop, factory, warehouse or office
Ergonomic answer to preventing back injuries
Heavy-duty steel frame and table
Smooth rolling poly over nylon casters -- two swivel and two fixed -- with parking brake
Easy-to-use hydraulic foot pump raises table to multiple heights
Quick lifting action with no load
Safety overload and top of stroke bypass system provides maximum pump protection
Patent pending pump release fold-down handle
Two-year warranty
Product Specifications
Net Weight: 152 lbs.
Handle: 37-13/16" H
Height: 10-5/8" min., 32-3/8" max.
Length: 40-1/2"
Strokes to Max Height: 13
Table Area: 32-1/2" x 19-5/8" x 2"
Capacity: 660 lbs.
|
|
|
The Workstacker Forklifter (WT Import) Lot #752 (Sale Order 752 of 1039) Manual hydraulic forklifter -- a dual-purpose tool for high lifting and short hauling. Stable elevation, flexible tuning, adjustable forks and easy operation. Includes handle and foot pump and foot brake casters.
Product Specifications
Lift Height: 59"
Load Center: 15-3/4"
Capacity: 2,200 lbs.
Dimensions: 52-3/4" L x 39-1/2" W x 89-1/2" H
Turning Radius: 57" extreme
Fork: 37-1/2" L; 37-1/2" max width; 4" min. fork height
Net Weight: 552 lbs.
|
|
|
Winch Stacker (JET) Lot #753 (Sale Order 753 of 1039) A simple and easy way to lift, lower and transport heavy loads with minimum effort
Heavy-duty welded steel frame with a durable powder coat finish
Low-effort hand winch equipped with automatic brake system and adjustable length handle
Easy to maneuver, with large-diameter swivel casters
Swivel casters feature foot brake to prevent movement
Adjustable width forks provide versatility
Safety cage provides great visibility
Two-year manufacturer warranty
Product Specifications
Capacity: 770 lbs.
Load Center: 18 lbs.
Lift: 59" max.
Fork: Dimensions, 36" x 3" x 1-3/4"; min. height, 3"
Turning Radius: 360°; 31"
Handle: Force required at capacity, 16"
Rotations to Max Height: 33
|
|
|
2 Ton Strap Pull'R Lot #754 (Sale Order 754 of 1039) Flexible strapping material conforms to and controls the load -- nonconductive properties
Precision cast aluminum alloy ratchet wheel and one-piece construction
Interlocking, precision fit, steel alloy pawls with safety spacer sleeve
Cold rolled, high strength, tempered steel frame and handle
Drop forged steel slip hooks with OSHA recommended safety latches
Aircraft type, heat treated bolts
High tensile fully rotating steel swivel
Trouble free, "notch at a time" letdown
Permanent comfortable non-slip grip
Product Specifications
Length: 12' strap
Leverage Ratio: 20:1
|
|
|
2-Ton Ratchet Puller (WT Import) Lot #755 (Sale Order 755 of 1039) Unit weight, 9 pounds. Cable, 3/16-inch diameter and 79 inches long. Drop forged hooks with safety clips.
|
|
|
4-Ton Ratchet Puller (WT Import) Lot #756 (Sale Order 756 of 1039) 5-foot pull at 4-ton capacity; 13-foot pull at 2-ton capacity
Three-hook system utilizes hook on traveling pulley
Safety latch on hook
Puller has double ratchet with arm for extra safety
3/16-inch diameter aircraft cable galvanized for protection against rust
Special strength steel frame
|
|
|
Heavy-Duty Cable Pullers (Maasdam) Lot #757 (Sale Order 757 of 1039) One-piece aluminum alloy ratchet wheel
High-strength, electroplated steel parts
Galvanized 5/16-inch aircraft cable with "notch at a time" letdown
Drop forged steel slip hooks
Permanent, non-slip plastic grip
Compound leverage
Suggested uses include lifting construction material; erecting buildings and towers; and moving, placing or installing heavy equipment
Also works great for tightening conveyor belts
Product Specifications
Capacity: 4 tons
Lift: 6' max.
Net Weight: 34 lbs.
Leverage Ratio: 65:1
|
|
|
Load Binders (WT Import) Lot #758 (Sale Order 758 of 1039) Double hook construction is ideal for securing heavy loads. Tie items down in instances where straps cannot be used.
Product Specifications
Size: 3/8" chain
|
|
|
Pow'R Pull Pullers Lot #759 (Sale Order 759 of 1039) Precision cast aluminum alloy ratchet wheel; one piece construction
Galvanized aircraft quality cable
Interlocking, precision fit steel alloy pawls with safety spacer sleeve
Cold rolled, high strength, tempered steel frame and handle
Drop forged steel slip hooks with OSHA recommended safety latches
Heavy gauge steel, reinforced ratchet guard
Aircraft type heat treated bolts
High tensile, fully rotating steel swivel
Trouble free "notch at a time" letdown
Permanent, comfortable, non-slip grip
Product Specifications
Capacity: 1 & 2 ton combination
Type: Pow'r Pull
Leverage Ratio: Varies based on application
Lift: Varies based on application
Diameter: 3/16" cable
|
|
|
10-Drawer Master Mechanic Tool Chest (Kennedy) Lot #760 (Sale Order 760 of 1039) Tamper-proof internal drawer locking system cannot be reached by bolt cutters or hacksaw or damaged when one drawer is closed with the chest locked.
Rugged cap-end construction on chest lids uses one of the strongest, self-reinforcing structural designs known to keep lids square and weather tight.
Two-piece, I-beam drawer slides permit smooth, easy full drawer extension and are stronger than one-piece ones
Slide limit stops keep drawer from extending beyond the chest frame. Spring clips on the slides allow drawer removal for cleaning
All chest exposed edges are rolled and flattened for added strength and safety
One-piece heavy-gauge steel back, bottom and top till panels are securely welded to the double-wall side panels, giving the chests a tight, solid fit
Fits on 27- or 29-inch wide roller cabinets
Product Specifications
Net Weight: 68 lbs.
Size: 26-1/8" W x 12-1/16" D x 18-13/16" H
Drawers: 10 + top
|
|
|
10-Drawer Tool Chest (Waterloo) Lot #761 (Sale Order 761 of 1039) Industrial enamel, baked-on brown wrinkle finish
Double-wall construction provides strength
Full-extension drawer slides allow for full access to drawer contents
Large independently-locking security drawer in chest to store valuables and manuals
Bulk storage area in cabinet for organization of containers and large bulky items locks independently for additional security
Chest includes steel tote tray
Tubular side handle provides a comfortable grip when moving cabinet
Over-molded handle on chest for carrying heavy-duty loads
Casters provide quiet and smooth movement over rough surfaces while carrying heavy loads
Product Specifications
Net Weight: 65 lbs.
Capacity: 4,350 cu. in.
Drawers: 10 plus top
Warranty: 5 years
Size: 26" W x 12" D x 19.75" H
|
|
|
10-Drawer Traxx Chest Lot #762 (Sale Order 762 of 1039) Comes standard with drawer liners to suspend tools off drawer bottom
Full extension ball bearing slides for complete tool access
Equipped with Posi-Latch drawer securing system to provide a positive latch for each drawer and to reduce accidental opening
Waterloo embossed chest stiffener for extra rigidity
Angled cover design for increased strength and durability
18-inch deep chest for storage of most-used tools
ISO certified
Available in red only
Product Specifications
Warranty: 7 years
Drawers: 10
Capacity: 13,564 cu. in.
Size: 51.1" W x 7.8" D x 19.8" H
|
|
|
13-Drawer ProMaxx Tool Storage Cart Lot #763 (Sale Order 763 of 1039) Tri-channel construction provides extra strength and durability
Full-extension 50-pound rated ball-bearing slides on all drawers for complete tool access
4-1/2-inch diameter casters and large push handle for ease in maneuvering
Keyed locks with internal lock bars to secure tools
Note: Red chest shown; also available in blue or black
Product Specifications
Net Weight: 174 lbs.
Warranty: 5 years
Size: 41" W x 19.1" D x 37.5" H
Color: Black
Capacity: 14,566 cu. in.
|
|
|
11-Drawer Machinist Chest (Kennedy) Lot #764 (Sale Order 764 of 1039) Drop-front panel with double-wall construction covers drawers, adds extra security for your tools and stores in base when not in use
Two-piece I-beam friction drawer slides permit smooth, easy full drawer extension and are stronger than one-piece slides
Thick wool felt drawer liners help keep precision tools clean and protect against corrosion.
Chest lid hinges are equipped with rust-resistant, stainless-steel pins, which are staked to prevent punch-out and lid removal
Vinyl cushioned steel core top handle
Integral double-wall side panel and slide construction evenly distributes and transfers drawer loads to the chest bottom panel, an important aid in eliminating stress on spot welds
Product Specifications
Net Weight: 47 lbs.
Size: 26-11/16" W x 8-9/16" D x 18" H
Drawers: 11 plus top
Color: Brown
|
|
|
11-Drawer Pro Series Tool Chests Lot #765 (Sale Order 765 of 1039) Double wall construction provides strength while reducing racking
One-piece smooth action professional drawer slides designed to carry heavy loads
Full extension drawer slides
Lid has two-point locking system
Five-year warranty
ISO certified
Product Specifications
Net Weight: 110 lbs.
Size: 40.5" W x 16" D x 19.75" H
Color: Blue
Capacity: 9,267 cu. in.
|
|
|
11-Drawer Tool Chest (Waterloo) Lot #766 (Sale Order 766 of 1039) Industrial enamel, baked-on brown wrinkle finish
Double-wall construction provides strength
Full extension drawer slides allow for full access to drawer contents
Top full-width drawer on cabinet has ball-bearing slides and is located at convenient height for most-used tools
13-inch deep drawer on cabinet for storing large tools
14-gauge caster support angles and 5-by-2-inch casters provide quiet and smooth movement over rough surfaces while carrying heavy loads
Tool cart comes standard with hardwood work surface
Shipped on customer-fit pallet
Product Specifications
Warranty: 5 years
Net Weight: 110 lbs.
Capacity: 9,267 cu. in.
Size: 40.5" W x 16" D x 19.75" H
Drawers: 11 plus top
|
|
|
11-Drawer Traxx Chests Lot #767 (Sale Order 767 of 1039) Sidewall post construction adds strength in design while reducing overall weight
Full extension ball bearing slides for complete tool access
Equipped with Posi-Latch drawer securing system to provide a positive latch for each drawer and reduces accidental opening
Waterloo embossed chest stiffener for extra rigidity
Angled cover design for increased strength and durability
Chrome over-molded side handles for ease in lifting
Comes standard with drawer liners to suspend tools off drawer bottom
ISO certified
Product Specifications
Size: 40.5" W x 17.8" D x 19.8" H
Color: Red
|
|
|
12-Drawer Pro Series Chest Lot #768 (Sale Order 768 of 1039) Goes great with Waterloo WI-1200 cabinet (order no. 8101-1205)
16-inch depth offers 25 percent more storage space than standard depth Pro Series chests
Steel tote tray
Double wall construction provides strength while reducing raking
One-piece smooth action professional drawer slides designed to carry heavy loads
Full extension drawer slides for complete access to contents
Top drawer locks separately to secure valuables while working
Five-year warranty
ISO certified
Product Specifications
Color: Red enamel finish
Size: 26.09"W x 15.97"D x 19.76"H
Capacity: 5,845 cu. in.
Net Weight: 82 lbs.
Width: 26"
|
|
|
12-Drawer Pro Series Roller Cabinet Lot #769 (Sale Order 769 of 1039) 14-gauge caster support channels and 5-by-2-inch casters for high load capacity
Goes great with WI-1265 chest (order no. 8101-1265)
Double wall construction provides strength while reducing raking
One-piece smooth action professional drawer slides are designed to carry heavy loads
Full extension drawer slides for complete access to contents
Top drawer locks separately to secure valuables while working
Five-year warranty
ISO certified
Product Specifications
Color: Red enamel finish
Width: 26.5"
Net Weight: 141 lbs.
Size: 26.53" W x 18.06" D x 41.13" H
Capacity: 10,355 cu. in.
|
|
|
12-Drawer Tool Cart (Waterloo) Lot #770 (Sale Order 770 of 1039) Industrial enamel, baked-on brown wrinkle finish
Double-wall construction provides strength
Full-extension drawer slides allow for full access to drawer contents
Top full-width drawer on cabinet has ball-bearing slides and located at convenient height for most-used tools
13-inch deep drawer on cabinet for storing large tools
14-gauge caster support angles and 5-by-2-inch casters provide quiet and smooth movement over rough surfaces while carrying heavy loads
Tool cart comes standard with hardwood work surface
Shipped on customer-fit pallet
Product Specifications
Warranty: 5 years
Net Weight: 207 lbs.
Capacity: 17,493 cu. in.
Size: 41" W x 18" D x 35.5" H
Drawers: 12
|
|
|
13-Drawer Traxx Tool Cart Lot #771 (Sale Order 771 of 1039) Large, deep and stable
Every drawer features full extension ball bearing slides
Posi-latch drawer closing system provides a positive, secure closure
Keyed lock for tool security
Roll cage construction adds strength in design while reducing overall weight
Four separate 6-inch deep drawers for storing large pneumatic and electric power tools
5-by-2-inch casters (two locking) for easy maneuvering
Interchangeable drawer system allows for flexibility in drawer configurations
Internal supports on top and bottom for carrying heavy loads
Comes standard with hardboard work surface and drawer liners
One drawer measures 47.5" W x 16.5" D x 4.2" H
Two drawers measure 22.4" W x 16.5" D x 4.2" H
Six drawers measure 22.4" W x 16.5" D x 3.1" H
Four drawers measure 22.4" W x 16.5" D x 6.4" H
ISO certified
Product Specifications
Capacity: 20,832 cu. in.
Net Weight: 309 lbs.
Size: 51.6" W x 20.0" D x 42.5" H
|
|
|
15-Drawer Pro Series Tool Cart Lot #772 (Sale Order 772 of 1039) Double-wall construction provides strength while reducing racking
Full extension drawers with smooth-action professional drawer slides
41-inch-wide models have 50 percent more storage capacity than 26-inch-wide carts
13-inch deep drawers for storing large pneumatic and electric-powered tools
5-by-2-inch casters for ease in maneuvering
Hardboard work surface standard
Built to accommodate Waterloo® WI-1511 chest (order no. 8101-1511)
Five-year warranty
ISO certified
Product Specifications
Size: 41" W x 18.1" D x 35.61" H
Net Weight: 231 lbs.
Color: Red enamel finish
Capacity: 16,267 cu. in.
|
|
|
15-Drawer Roller Cabinet (Kennedy) Lot #773 (Sale Order 773 of 1039) Universal drawer slide system offers unlimited flexibility of drawer configuration and drawer slide selection. Slide carrier channels are slotted at 2-inch increments to allow the maximum drawer configuration.
Huge 39-by-8-inch work surface
Full-width drawer pulls and tubular side handle
Two keyed-alike, high security tubular locks keep tools safe
Four casters move tools smoothly
Made of heavy gauge steel -- 18 gauge on the cabinet body; 20 gauge in the drawers
Ball bearing drawer slides on all drawers permits smooth, feather-light drawer operation under heavy loads
Product Specifications
Net Weight: 230 lbs.
Size: 39-3/8" W x 18" D x 39" H
Drawers: 15
|
|
|
20" Steel 3-Drawer Portable Chest Lot #774 (Sale Order 774 of 1039) Portable steel chest
Three full-extension drawers
Generous top storage area
Fully lockable
Comfort grip handle
Heavy-duty rust-resistant latches
One-year warranty
ISO certified
Product Specifications
Drawers: Three (17.8" W x 7.4" D x 2.2" H)
Capacity: 1,555.13 cu. in.
Net Weight: 19 lbs.
Dimensions: 20.5" W x 8.5" D x 12.75" H
|
|
|
3-Drawer Handyman Chest (Kennedy) Lot #775 (Sale Order 775 of 1039) Tamper-proof, internal drawer locking system cannot be reached by bolt cutters or hacksaw, or damaged when one drawer is closed with the chest locked
Drawers lock automatically when lid is closed
Smooth operating, full-length chest hinges are staked and securely welded to prevent lid removal and safely hold lid open
Rugged, cap-end construction on chest lids keeps them square and weather tight.
Two-piece, I-beam drawer slides permit smooth, easy full drawer extension and are stronger than one-piece slides
Slide limit stops keep drawer from extending beyond the chest frame; spring clips allow drawer removal for cleaning
All exposed edges are rolled and flattened for added strength and safety One-piece heavy-gauge steel back, bottom and top till panels are securely welded to the double-wall side panels for tight, solid fit
Top till holds lift-out tray equipped with socket set divider
Friction slides only
Product Specifications
Color: Brown wrinkle finish
Size: 26-1/8" W x 12-1/16" D x 14-3/4" H
Net Weight: 44 lbs.
|
|
|
3-Drawer Roller Cabinet (Kennedy) Lot #776 (Sale Order 776 of 1039) You'll find this rugged unit full of handy, practical storage space for a variety of tools. Drawers have automatic internal locking system, and swing-down panel conceals and secures spacious storage compartment. Side handle is standard. Model 273 can be used with any 20- or 26-inch wide chest or 22- or 26-inch wide base or riser. Includes 5 by 1-1/4 inch casters. With friction slide drawers.
Product Specifications
Color: Brown wrinkle
Size: 27" W x 18" D x 35" H
Net Weight: 99 lbs.
Drawers: 3
|
|
|
12-Drawer Pro Series Tool Carts Lot #777 (Sale Order 777 of 1039) Double wall construction
One-piece smooth action professional drawer slides designed to carry heavy loads
Full extension drawer slides
14-gauge caster support channels and 5-by-2-inch casters
Top full-width drawer on cart has ball bearing slides and is located at a convenient height
13-inch deep drawer on cabinet
Hardboard work surface
Five-year warranty
ISO certified
Product Specifications
Net Weight: 207 lbs.
Size: 41"W x 18.1"D x 35.6"D (41.1"H w/casters)
Color: Blue enamel finish
Capacity: 17,493 cu. in.
|
|
|
12-Drawer Traxx Tool Carts Lot #778 (Sale Order 778 of 1039) 13-inch deep drawer provides storage space for large tools and equipment
Drawer liners to suspend tools off drawer bottom
5-by-2-inch casters with chrome hubcaps for ease in maneuvering
Full extension, ball bearing slides for complete tool access
Equipped with Posi-Latch drawer securing system to provide a positive latch for each drawer and to reduce accidental opening
Top 4-inch full-width drawer on cart for storing deep well sockets and other commonly used tools
Sidewall post construction adds strength in design while reducing overall weight
Tubular side handle
Includes hardboard work surface
ISO certified
Product Specifications
Capacity: 15,961 cu. in.
Color: Black
Net Weight: 222 lbs.
Warranty: 7 years
Size: 41" W x 18.1" D x 35.6" H
|
|
|
13-Drawer Traxx Tool Carts Lot #779 (Sale Order 779 of 1039) 1,200 lb. load rating
Posi-Latch drawer securing system provides a positive latch for each drawer and reduces accidental opening
Sidewall post construction adds strength in design while reducing overall weight
Full extension ball bearing slides for complete tool access
Interchangeable drawer system with quick-release slide allows for flexibility in drawer configurations
Positive stop side handles on all chests for ease of lifting
Heavy-duty tubular side handle for ease in maneuvering
Reinforced cabinet back adds strength and durability
14-gauge caster support channels and extra large casters for high load capacity
Easy grip and over-molded keys
Drawer liners to suspend tools off drawer bottom
Waterloo embossed chest stiffener for extra rigidity in the cover
Seven-year warranty
Product Specifications
Size: 58.5" W x 20" D x 42.5"H
Color: Blue
|
|
|
3-Drawer Shop Series Intermediate Chest Lot #780 (Sale Order 780 of 1039) Three full-width drawers
Chest bolts to bottom of others for additional security
External lock bar and keyed locks provide visible security
One-year warranty
ISO certified
Product Specifications
Size: 26" W x 12" D x 11.5" H
Capacity: 1,882 cu. in.
Color: Red enamel
|
|
|
3-Drawer Shop Series Roller Cabinet Lot #781 (Sale Order 781 of 1039) Reinforced side-wall construction for added strength and durability
Full extension drawer slides provide complete access to every drawer
Full width drawer pulls add strength and convenience
External lock bar provides visual proof of security
Large storage area in cabinet for bulky equipment and supplies
4-by-2-inch casters provide easy maneuvering
One-year warranty
ISO certified
Product Specifications
Size: 26.5" W x 18" D x 27.75" H (32.5"H w/casters)
Color: Red enamel finish
Capacity: 9,280 cu. in.
|
|
|
4-Drawer Pro Series Intermediate Chest Lot #782 (Sale Order 782 of 1039) Double wall construction provides strength while reducing racking
Full-extension drawers with smooth-action professional drawer slides
Adds up to 1,900 cubic inches of storage to tool chest and cabinet combination
Sized to accommodate any 12-inch deep chest
Five-year warranty
ISO certified
Product Specifications
Drawers: 4
Color: Red
Size: 26.1" W x 12.1" D x 12.3" H
Net Weight: 34 lbs.
Capacity: 1,929 cu/in.
|
|
|
4-Drawer Traxx Full-Height Locker Lot #783 (Sale Order 783 of 1039) Angled cover design
Reversible door for mounting on either side of cabinet
Quick release ball bearing slides for easy configuration
Includes two-point hook for hanging jackets and miscellaneous equipment
Four interchangeable pull-out drawers
ISO certified
Product Specifications
Size: 15.9" W x 18" D x 54.6" H
|
|
|
5-Drawer Hang-On Cabinet (Kennedy) Lot #784 (Sale Order 784 of 1039) Universal hang-on cabinet with front facing drawers makes it easy to reach all your tools. Cabinet has an internal locking system and bolts to either side of your roller cabinet. Fits any Kennedy 29-inch wide cabinet.
Product Specifications
Color: Brown wrinkle
Drawers: 5
Size: 13-5/8" W x 20" D x 29" H
Net Weight: 72 lbs.
|
|
|
5-Drawer Mobile Work Center Lot #785 (Sale Order 785 of 1039) Constructed of commercial grade metal and plastic, the Rubbermaid® five-drawer mobile work center can support up to 250 pounds.
The sturdy convenient work surface accommodates a wide variety of maintenance tasks. Its compact size, molded-in handle and swivel casters let you move easily over a variety of floor surfaces, through tight spaces like corridors and elevators and onto the job site.
A built-in electrical cord wrap and side pegboards keep hand tools and work lights within reach. Small parts organizers on the top and 5 drawers of varying depths conveniently store hardware and equipment of different sizes and shapes.
Locking swivel casters stabilize the work center for on-the-job tasks, and the metal locking bar accommodates a standard padlock to secure drawers and protect valuable contents during downtime (padlock not included).
Product Specifications
Capacity: 250 lbs.
Drawers: 5
OAL: 33-1/2"H x 32-5/8"L x 19-15/16"W
Net Weight: 61 lbs.
|
|
|
5-Drawer Shop Series Roller Cabinet Lot #786 (Sale Order 786 of 1039) Reinforced side-wall construction for added strength and durability
Full-extension drawer slides provide complete access to every drawer
4-by-2-inch casters provide easy maneuvering
External lock bar provides visual proof of security
Red finish
One-year warranty
ISO certified
Product Specifications
Size: 26.5" W x 18" D x 27.75" H
Capacity: 8,246 cu. in.
|
|
|
4-Drawer ProMaxx Tool Cabinets (Waterloo) Lot #787 (Sale Order 787 of 1039) Tri-channel construction provides extra strength and durability
Full-extension, 50-pound rated ball-bearing slides on all drawers for complete tool access
4-1/2-inch diameter casters for ease in maneuvering
Keyed locks with internal lock bars to secure tools
Large push handle for ease in maneuvering
Five-year warranty
Note: Red cabinet pictured; this model also available in blue or black
Product Specifications
Warranty: 5 years
Color: Red
Size: 26.5" W x 18.1" D x 32.1" H
Capacity: 7,718 cu. in.
|
|
|
4-Drawer Tool Cabinet & 6-Drawer ProMaxx Chest Combo Lot #788 (Sale Order 788 of 1039) Tri-channel construction
Full extension 50-pound rated ball-bearing slides
Keyed locks with internal lock bars
Cabinet has large push handle and 4-1/2-inch diameter casters
Chest has divided top tray
Five-year warranty
Product Specifications
Color: Red
Dimensions: 26.5" W x 18.1" D x 32.1" H; chest, 26.1" W x 12.1" D x 15.4" H
Capacity: Chest 3,458 cu.in., Cabinet 7,718 cu.in
|
|
|
5-Drawer Roller Cabinets (Kennedy) Lot #789 (Sale Order 789 of 1039) If you need drawers for hand tools and a spacious storage compartment, this cabinet is for you. Drawers have automatic internal locking system. Swing-down panel conceals and secures ample storage compartment. Heavy-gauge steel top, bottom and back panels are securely welded to the double-wall side panels; giving a tight, solid, fit.
Model 295 can be used with any 26- or 28-inch wide chest, chest base or riser. Model 275 can be used with any 26- or 20-inch wide chest, chest base or riser.
Product Specifications
Size: 29" W x 20" D x 35" H
Net Weight: 128 lbs.
Color: Brown wrinkle
Type: Ball bearing drawer slides
Wheel Dim: 5" x 2"
Drawers: 5
|
|
|
5-Drawer Shop Series Roller Cabinet Lot #790 (Sale Order 790 of 1039) Compact 14-inch deep roller cabinet is Waterloo's best value in a five-drawer cabinet
Reinforced side-wall construction for added strength and durability
Full-extension drawer slides provide complete access to every drawer
4-by-2-inch casters provide easy maneuvering
External lock bar provides visual proof of security
One-year warranty
ISO certified
Product Specifications
Net Weight: 57 lbs.
Size: 26.5" W x 14" D x 27.8" H (31.9" H w/casters)
Color: Red enamel
Capacity: 6,279 cu. in.
|
|
|
6-Drawer Pro Series Tool Chest Lot #791 (Sale Order 791 of 1039) Double-wall construction provides strength while reducing racking
One-piece smooth action professional drawer slides designed to carry heavy loads
Full-extension drawer slides for complete access to contents
Center drawer locks separately to secure valuables while working
Steel tote tray
Five-year warranty
ISO certified
Brown wrinkle finish in limited quantities; available while supplies last
Product Specifications
Dimensions: 26" W x 12" D x 15.5" H
Color: Red finish
|
|
|
6-Drawer Shop Series Tool Center with Parts Bin Lot #792 (Sale Order 792 of 1039) Four-drawer chest ships inside two-drawer cabinet
Keyed alike for convenient locking of both units
Comes with three bins for organizing small parts and supplies
Chest bolts to cabinet for extra security of chest and contents
3-by-1-inch casters provide easy maneuvering
Large storage area in base of cabinet for bulky equipment and supplies
Chest dimensions, 22" W x 12" D x 13.25" H
Cabinet dimensions, 26.5" W x 14" D x 27.75" H
One-year warranty
ISO certified
Product Specifications
Size: 26.6" W x 14" D x 40.5" H (43.2" high w/asters)
Color: Red
Capacity: 9,627 cu. in.
|
|
|
6-Drawer Shop Series Tool Chest Lot #793 (Sale Order 793 of 1039) Reinforced side-wall construction for added strength and durability
Full-extension drawer slides provide complete access to every drawer
Three split and three full-width drawers serve various storage needs
External lock bar provides visual proof of security
Inset side handles in chest
One-year warranty
ISO certified
Product Specifications
Capacity: 3,309 cu. in.
Size: 26.06" W x 12" D x 15.376" H
Color: Red finish
Net Weight: 35 lbs.
|
|
|
7-Drawer Apprentice Chest (Kennedy) Lot #794 (Sale Order 794 of 1039) Includes six adjustable zinc-coated steel drawer dividers
Drop-front panel with double-wall construction covers drawers, adds extra security for your tools and stores in base when not in use
Two-piece, I-beam friction drawer slides permit smooth, easy full drawer extension and are stronger than one-piece ones
Thick, wool felt drawer liners help keep precision tools clean and protect against corrosion.
Chest lid hinges are equipped with rust-resistant, stainless-steel pins, which are staked to prevent punch-out and lid removal
Vinyl cushioned, steel core top handle
Integral side panel/slide construction evenly distributes and transfers drawer loads to the chest bottom panel, an important aid in eliminating stress on the chest spot welds
Product Specifications
Style: Brown wrinkle finish
Drawers: 7 plus top
Size: 20-1/8" W x 8.5" D x 13-5/8" H
Net Weight: 28 lbs.
|
|
|
6-Drawer ProMaxx Tool Storage Chest Lot #795 (Sale Order 795 of 1039) Full-extension, 50-pound rated ball-bearing slides on all drawers for complete tool access
Divided top tray to store most needed hand tools
Keyed locks with internal lock bars to secure tools
Five-year warranty
Note: Red chest is shown; also available in blue or black
Product Specifications
Size: 26.1" W x 12.1" D x 15.4" H
Warranty: 5 years
Color: Red
Capacity: 3458 cu. in.
|
|
|
6-Drawer Pro Series Side Tool Cabinet Lot #796 (Sale Order 796 of 1039) Double wall construction provides strength while reducing racking
One-piece smooth action professional drawer slides designed to carry heavy loads
Full extension drawer slides for complete access of contents
Side cabinet fits all 41-inch tall cabinets
Comes standard with hardboard work surface
Large deep drawer ideal for storing bulky tools
Five-year warranty
ISO certified
Product Specifications
Capacity: 5,663 cu. in.
Size: 15.9" W x 18.1" D x 35.3" H
Color: Blue
|
|
|
6-Drawer Traxx Side Cabinet Lot #797 (Sale Order 797 of 1039) Bottom deep drawer is designed to accept a second set of ball-bearing slides for heavy-duty loads. Fits all 41-inch Traxx® roller cabinets and most 26-inch cabinets. Hardboard work surface standard. ISO certified.
Product Specifications
Size: 15.9" W x 18.1" D x 35.3" H
Capacity: 5,663 cu. in.
Color: Blue
|
|
|
7-Drawer Pro Series Roller Tool Cabinets Lot #798 (Sale Order 798 of 1039) Double wall construction provides strength while reducing racking
One-piece smooth action professional drawer slides designed to carry heavy loads
Full-extension drawer slides for complete access of contents
14-gauge caster support channels and 5-by-2-inch casters for high load capacity
Large drawers in cabinet for storing large tools and equipment
Five-year warranty
ISO certified
Note: Red cabinet shown; product also available in brown wrinkle finish.
Product Specifications
Size: 26.5" W x 18" D x 35.5" H
Color: Brown wrinkle finish
|
|
|
7-Drawer Roller Cabinets (Kennedy) Lot #799 (Sale Order 799 of 1039) Tamper-proof internal locking system cannot be damaged when one drawer is closed with the cabinet locked.
Heavy-gauge steel top, bottom and back panels are securely welded to the double-wall side panels, giving a tight, solid, fit. This integral cabinet construction evenly distributes and transfers drawer loads to the cabinet bottom panel and casters. Side handle is standard. With friction slides.
Model 277 can be used with any 20- or 26-inch wide chest, chest base or riser. Model 297 can be used with any 26- or 28-inch wide chest, chest base or riser.
Product Specifications
Net Weight: 146 lbs.
Color: Brown wrinkle
Drawers: 5
Dimensions: 29" W X 20" D X 35" H
Wheel Dim: 5" x 2"
|
|
|
7-Drawer Shop Series Chest Lot #800 (Sale Order 800 of 1039) Three split and four full-width drawers
Generous top storage area
External lock bar provides visual proof of security
Reinforced side-wall construction for added strength and durability
Full-extension drawer slides provide complete access to every drawer
Red finish
One-year warranty
ISO certified
Product Specifications
Capacity: 3,771 cu. in.
Net Weight: 38.5 lbs.
Size: 26.06" W x 12" D x 17.47" H
|
|
|
8-Drawer Journeyman Chest (Kennedy) Lot #801 (Sale Order 801 of 1039) Drop-front panel with double-wall construction covers drawers, adds extra security for your tools and stores in base when not in use
Two-piece I-beam friction drawer slides permit smooth, easy full drawer extension and are stronger than one-piece ones
Thick wool felt drawer liners help keep precision tools clean and protect against corrosion.
Chest lid hinges are equipped with rust resistant stainless steel pins, which are staked to prevent punch-out and lid removal
Vinyl cushioned, steel core top handle
Integral side panel/slide construction evenly distributes and transfers drawer loads to the chest bottom panel, an important aid in eliminating stress on the chest spot welds
Product Specifications
Size: 22-11/16" W x 8-9/16" D x 13-5/8" H
Drawers: 8 plus top
Net Weight: 36 lbs.
Style: Brown wrinkle finish
|
|
|
Deluxe Mechanic's Cart (WT Import) Lot #802 (Sale Order 802 of 1039) With three lockable drawers with handles and liners. Locking top includes keys. Unique tool and accessory storage area with 22 holes. Includes bottom tool tray, side handle and four 4-inch casters (two rigid and two swivel).
Product Specifications
Dimensions: Overall, 30-1/2" L x 19-5/8" W x 34" H; inside compartment, 26-1/2" L x 17-1/2" W x 4-7/8" D
Drawers: Two 12" L x 17" W x 3" D; one 25-3/4" L x 17" W x 3" D
|
|
|
End Mill Dispenser (Huot) Lot #803 (Sale Order 803 of 1039) Separates and organizes end mills from 1/8 to 1 inch
Three compartments for 1/8, 1/4, 3/8, 1/2 and 3/4 inch
Two compartments for 3/16, 3/8, 7/16, 5/8 and 1 inch
One compartment for 9/16, 11/16 and 7/8 inch
Stackable
One piece drawer slide
Finished with tough epoxy powder coating
ISO certified
Product Specifications
Dimensions: 7-3/4" H x 14-5/8" W x 7-3/8" D
|
|
|
9-Drawer ProMaxx Tool Storage Chest Lot #804 (Sale Order 804 of 1039) Full-extension, 50-pound rated ball-bearing slides on all drawers for complete tool access
Divided top tray to store most-needed hand tools
Keyed locks with internal lock bars to secure tools
Five-year warranty
Note: Red chest is pictured; also available in blue or black
Product Specifications
Size: 40.5" W x 16" D x 19.8" H
Capacity: 6,621 cu. in.
Color: Black
Warranty: 5 years
|
|
|
Add-On Bases for Tool Chests (Kennedy) Lot #805 (Sale Order 805 of 1039) Add extra storage, a place to set your Kennedy tool chests or even make these bases part of a larger Kennedy tool storage stacking system. Bases are the same heavy-gauge welded steel construction as all of Kennedy's other toolboxes, chests and roller cabinets. Brown wrinkle finish. Friction slide drawers only.
Product Specifications
Size: 26-5/8" W x 12-1/2" D x 11-3/4"
Drawers: 4
Net Weight: 35 lbs.
Color: Brown wrinkle
Fits: Kennedy tool chest Models 263, 266 360; 26", 29" & 34" roller cabinets
|
|
|
Advanced Mechanic's Chest Lot #806 (Sale Order 806 of 1039) The tamper-proof, internal drawer locking system cannot be reached by bolt cutters or hacksaw, or damaged when one drawer is closed with the chest locked. Rugged, cap-end construction on chest lids uses one of the strongest, self-reinforcing structural designs known to keep lids square and weather tight.
Two-piece I-beam drawer slides permit smooth, easy full drawer extension. And they're stronger than one-piece slides, which have weak shoulder areas and may split under heavy drawer loads.
Model 2805 comes standard with snap-in friction slides, while Model 2805X comes standard with ball bearing drawer slides.
Other features:
Slide limit stops keep drawer from extending beyond chest frame
Spring clips on the slides allow drawer removal for cleaning
All chest exposed edges are rolled and flattened for added strength and safety
One-piece heavy-gauge steel back
Bottom and top till panels are securely welded to the double-wall side panels, giving the chests a tight, solid fit
Integral chest construction evenly distributes and transfers drawer loads to the chest bottom panel, an important aid in eliminating stress on chest spot welds
Product Specifications
Size: 29"
Net Weight: 87 lbs.
OAL: 29"W x 20"D x 16-5/8"H
Drawers: 5
|
|
|
All-Purpose Pro Toolboxes (Kennedy) Lot #807 (Sale Order 807 of 1039) Includes lift-out tray, vinyl coated steel top handle and socket set divider. Brown wrinkle powder finish.
Product Specifications
Size: 20-1/8" W x 8-5/8" D x 9-3/4" H
Net Weight: 13 lbs.
Width: 20"
Includes: 19.5" W x 7.75" D x 3-3/8" H tray
Color: Brown wrinkle finish
|
|
|
Cantilever Toolboxes (Kennedy) Lot #808 (Sale Order 808 of 1039) With brown wrinkle finish and tan enamel trays.
Product Specifications
Net Weight: 22.5 lbs.
Color: Brown wrinkle
Width: 22"
Size: 22-1/8" W x 10-1/16" D x 12-5/8" H
|
|
|
Machinist's 2-Drawer Add-On Tool Chest Bases (Kennedy) Lot #809 (Sale Order 809 of 1039) Top drawer is wool felt-lined. Brown wrinkle finish.
Product Specifications
Drawers: 2 (24-1/4"W x 9-3/8"D x 1-1/2"H and 24-1/2"W x 9-3/8"D x 3-1/2"H)
Size: 28-1/8"W x 9-5/8"D x 7-13/16"H
Net Weight: 21 lbs.
|
|
|
26" ProMaxx 3-Drawer Intermediate Tool Chest Lot #810 (Sale Order 810 of 1039) 1,968-cubic-inch capacity
Ball bearing slides
Tri-channel construction provides extra strength and durability
Full-extension ball-bearing drawer slides on all drawers for complete tool access
Easy-grip, over-molded keys
Five-year warranty
Note: Red chest shown; product also available in blue or black.
Product Specifications
Size: 26.1" W x 12.1" D x 12.3" H
Net Weight: 31 lbs.
Color: Red
|
|
|
4" Power Suction Cup Lot #811 (Sale Order 811 of 1039) Plastic high visibility handle and support plates for a strong pull. Perfect as a dent puller for automotive use, and lifts glass, sheet metal, plastic or any smooth sheet surface.
Product Specifications
Diameter: 4"
|
|
|
Vacu-Lifter Cup Grabber (Import) Lot #812 (Sale Order 812 of 1039) One finger lift fits snugly in top ring. No metal parts; all rubber composition.
Product Specifications
Size: 2-1/8"
|
|
|
Vacuum Hand Cups (Powr-Grip) Lot #813 (Sale Order 813 of 1039) N Series vacuum hand cups from Wood's Powr-Grip are an economical method for moving desks, filing cabinets or any object with flat surfaces.
The ABS polymer used in the pump and handle makes the cup lightweight, strong and rust resistant. Cups attach attachment fast onto smooth, nonporous surfaces. A red-line indicator warns user of any vacuum loss, and a check valve allows re-pumping without loss of remaining vacuum.
The release valve lever permits quick and complete release. The handle/release valve and plunger are easily replaced. Cups supplied with protective carrying case.
Product Specifications
Size: 9" pad
Type: Metal handle hand cup w/box
Capacity: 150 lbs.
|
|
|
40-Gallon Parts Washer Lot #814 (Sale Order 814 of 1039) Quality WT Import washer of durable steel.
Product Specifications
Net Weight: 101 lbs.
Tank Size: 35-3/8" L x 22" W x 15-3/4" H
Dimensions: 39-3/4" L x 24-5/8" W x 40-1/4" H
Capacity: Working, 20 gal. min., 30 gal. max.; tank, 40 gal. max.
Power: 115V
Flow Capacity: 80-126 GPH
|
|
|
BAC S30 Parts Washer Lot #815 (Sale Order 815 of 1039) Mild steel construction. Features include flexible hose for solution flow; drain strainer with reusable filter bag; and fusible linked fire cover.
Product Specifications
Capacity: 30 gal. drum
Hose Size: 3/8" dia.
Power: 120V
Dimensions: 33" L x 21" W x 8" D
Color: Blue
Flow Capacity: 170 GPH
|
|
|
Heavy-Duty Parts Washer Lot #816 (Sale Order 816 of 1039) This parts washer is designed for use in shops ranging from the home mechanic's garage to heavy industry. This unit, while inexpensive to own and operate, has the same rugged construction and convenient features usually found on much more expensive units.
Tank is fabricated of 19-gauge steel
Triple baked enamel finish
Removable work shelf and parts basket keep parts out
Rugged, welded steel construction
Heavy-duty metal stand with convenient work shelf
Fully enclosed electric pump and fully screened pump housing
Self-latching fusible linked fire cover
Chromed metal spigot
Built-in drain
Convenient on/off switch with indicator light
Product Specifications
Tank: 28" L x 19" W x 10" H
Dimensions: 30" L x 20" W x 35" H
Flow Capacity: 50 GPH
Capacity: 20 gal.
Net Weight: 60 lbs.
Motor: 115V, 60 Hz, 0.5 amp
|
|
|
Portable Parts Washer (WT Import) Lot #817 (Sale Order 817 of 1039) UL listed. Seamless construction, fully enclosed pump.
Product Specifications
Dimensions: 17-3/8" L x 14" W x 8-3/4" H
Capacity: 3.5 gal. max.
Flow Capacity: 3 gal./min.
Motor: 110V
|
|
|
1/2" Cordless T-Handle 14.4V Driver/Drill (Milwaukee) Lot #818 (Sale Order 818 of 1039) The rugged Lok-Tor series delivers higher torque and speeds; longer run time; and the increased durability and quality expected from Milwaukee Electric Tools.
All Lok-Tor models feature an exclusive all-metal, single-sleeve ratcheting chuck with carbide jaws to provide the highest grip torque on bits of any competitive product.
The Milwaukee-built high efficiency motor delivers up to 460 inch-pounds of torque. This motor and superior battery technology combine to provide the ultimate run time.
Another Milwaukee exclusive is the dampened or "quiet" spindle lock mechanism, which relieves the stress of metal slamming on metal for increased durability and smooth operation.
Milwaukee's exclusive reversible battery allows users to adjust balance and get into tight spaces. Kit includes two 2.4 amps per hour, 14.4-volt batteries; universal charger; side handle; and carrying case.
Product Specifications
Net Weight: 5.8 lbs.
Net Weight: 3.7 lbs.
Chuck Size: 1/2" keyless
Power: 14.4V DC, 2.4 amps
Torque: 460 in.-lbs.
Length: 10.5"
Capacity: 1/2" steel; 2-1/8" wood
|
|
|
1/2" Cordless T-Handle Driver/Drill Lot #819 (Sale Order 819 of 1039) The rugged Lok-Tor™ series delivers higher torque and speeds; longer run time; and the increased durability and quality expected from Milwaukee Electric Tools.
All Lok-Tor models feature an exclusive all-metal, single-sleeve ratcheting chuck with carbide jaws to provide the highest grip torque on bits of any competitive product.
The Milwaukee-built high efficiency motor delivers up to 495 inch-pounds of torque. The high-efficiency motor and superior battery technology combine to provide the ultimate run time.
Another Milwaukee exclusive is the dampened or "quiet" spindle lock mechanism, which relieves the stress of metal slamming on metal for increased durability and smooth operation.
Milwaukee's exclusive reversible battery allows users to adjust balance and get into tight spaces. Comes complete with two 2.4 amps per hour, 18-volt batteries; universal charger; side handle; and carrying case.
Product Specifications
Chuck Size: 1/2" keyless
RPM: 0-500/0-1700 no load
Torque: 495 in./lbs.
Net Weight: 6.3 lbs.
Power: 18V DC, 2.4 amp
Length: 10.5"
Capacity: 1/2" steel, 2-1/8" wood
|
|
|
1/2" Keyless Chuck Cordless Drill/Driver Lot #820 (Sale Order 820 of 1039) Offers the most power per pound of any cordless drill/driver in its class. Patent-pending IQv technology provides maximum performance, durability, and battery life. Can be powered by either lithium-ion or nickel cadmium batteries. An industrial keyless ratcheting chuck guarantees industrial grade performance. Ideal for all drilling, boring, fastening, and screwing applications. Ingersoll Rand IQv Series cordless tools are specifically designed for the service and production industries - delivering best-in-class power and durability, and a strong commitment to our customers. The same engineering that made our air tools the world’s best now delivers cordless technologies that get the most out of every volt. Add chargers, battery analyzers, and a brand new suite of accessories and you’ve got the most powerful range of cordless tools in the industry.
Product Specifications
Chuck Size: 1/2" keyless
Net Weight: 3.2 lbs. no battery, 5.7 lbs. w/NiCd, 4.7 lbs. w/Li-Ion
Speed(s): 2
Torque: 650 in/lbs
Length: 9.61"
RPM: 0-360/1300
Motor: 19.2V
|
|
|
1/2" MXT Driver/Drill Kit (Makita) Lot #821 (Sale Order 821 of 1039) Two-piece ND-31 motor with dual ball bearing for longer motor life
Delivers up to 560 inch-pounds of maximum torque
Shift-Lock® drive system quickly shifts from drill to driver mode with one touch
Ergonomic rubberized grip for comfort and control
Exclusive refined rare earth magnet produces maximum power
Two-piece armature and field allow greater serviceability
Makita-built all metal gears for maximum durability
Three-speed design produces 25 percent faster working speed with more efficiency in wider range of applications
Externally accessible brushes for serviceability and longer motor life
Locking ratcheting chuck securely grips all bits
Kit includes with two 1434 batteries, universal charger, Phillips/slotted bit, side handle, keyless chuck, battery cover and plastic tool case
Product Specifications
Chuck Size: 1/2"
Max Torque: 560 in.-lbs.
Net Weight: 5.7 lbs. (w/battery)
OAL: 9-7/8"
Motor: 18V DC (2.6 Ah) battery
RPM: 0-300 low, 0-600 mid., 0-1,700 high
Run Time: 46.8 hours
|
|
|
1/4" Quick Change Hex Impactool Lot #822 (Sale Order 822 of 1039) The W040 is lightweight and compact for easy access in confined spaces. Patent-pending Iqv technology provides maximum performance, durability, and battery life. The W040 runs on both the 7.2V lithium-ion (BL072) and 7.2V nickel cadmium (N072) batteries. Ideal for automotive interior, engine service, autobody service, and non-critical assembly applications. Reverse bias torque to prevent stripping small or plastic fasteners. All metal hammercase and housing ring for ultimate durability.
Product Specifications
Volts: 7.2V
Length: 7.01"
Net Weight: 2.9 lbs. (2.9 w/Ni-Cd, 2.7 w/Li-Ion)
Max Torque: 1-30 ft./lbs. (40 ft./lbs. reverse)
BPM: 0-2500
|
|
|
12V Cordless Grease Gun Kit Lot #823 (Sale Order 823 of 1039) Kit includes grease gun; two 12-volt, 1.3 amp-hour batteries, one-hour quick charger; DC power cord; 30-inch flexible hose; and carrying case.
Features:
Up to five times faster than manual grease guns
Automatic operation -- grease dispensed in a continuous flow until trigger is released
Ideal for hard to reach fittings
Delivers up to 6,000 PSI
Product Specifications
Capacity: 14-1/2 oz.
Power: 12V, 1.3 Ah battery
|
|
|
18V Compact Lithium Ion 1/2" Driver Drill Kit (Makita) Lot #824 (Sale Order 824 of 1039) Kit consists of driver, two compact lithium ion batteries, 15-minute rapid charger and case.
Makita built, four-pole maximum torque motor delivers 450 inch- pounds of efficient torque in a compact size
More compact design and lightweight for less operator fatigue
Batteries charge four times faster in only 15 minutes
Ergonomic shape fits like a glove with even pressure and easy control
Makita lithium ion provides longer run time; five times lower self-discharge (for use anytime); and 16 firm holding contact terminals for constant high power
15-minute rapid optimum charger and battery communicate throughout charging process using built-in chips
Charger also uses "Active 3 Control" for current, thermal and voltage controls
15-minute rapid optimum charger has a built-in fan to cool the battery to produce more lifetime work
Built-in LED light illuminates the work area
Accepts all lithium ion slide-style batteries
Product Specifications
RPM: No load, 0-450 high; 0-1,500 low
Length: 8"
Volts: 1.5V Li ion; accepts 3V Li ion
Capacity: 1/2" steel; 1-1/2" wood
Net Weight: 3.5 lbs.
Watts: 27 watt hours
Torque: 450 in.-lbs.
|
|
|
3/8" 14.4-Volt Cordless Driver/Drill Kit (Wen) Lot #825 (Sale Order 825 of 1039) 16-position clutch, coupled with variable speed, provide proper torque and speed needed for any job
Electronic brake stops motor rotation as soon as trigger is released
Keyless Jacobs® chuck allows for easy bit or driver changes without worry of a lost key
Reliable Johnson motor provides years of trouble-free service
"Soft touch" finish helps eliminate hand slippage during strenuous use
LED lights on battery charger show the charge state
Includes battery charger, 13-piece common drill and driver bit set, one rechargeable battery and carrying case
Product Specifications
Chuck Size: 3/8" keyless; 16 position
Power: 14.4V DC
Speed(s): 0 -800 RPM
Net Weight: 7.7 lbs.
|
|
|
3/8" 18V Cordless Drill/Driver Kit (Wen) Lot #826 (Sale Order 826 of 1039) 16-position clutch, coupled with variable speed, provide proper torque and speed needed for any job
Electronic brake stops motor rotation as soon as trigger is released
Keyless Jacobs® chuck allows for easy bit or driver changes without lost key worry
Reliable Johnson motor provides years of trouble-free service
"Soft touch" finish helps eliminate hand slippage during strenuous use
LED lights on battery charger show charge state
Battery recharge time is 3 to 5 hours
Includes battery charger, 13-piece common drill and driver bit set, bit holder, double-ended slotted and Phillips bit and blow molded case
Product Specifications
Warranty: 1 year limited
Chuck Size: 3/8" keyless; 16 position
Motor: 18V DC
Net Weight: 8.1 lbs.
RPM: 0-900
|
|
|
7.2V Lithium Ion Cordless Impact Screwdriver Kit (Makita) Lot #827 (Sale Order 827 of 1039) Ultra-compact impact mechanism yields 177 inch-pounds of torque
Weighs only 1 pound
True ergonomic grip
Operates in straight or pistol grip positions
Lithium ion batteries and charger for two times more cycles and longer run time
Makita lithium ion provides longer run time; five times lower self-discharge (for use anytime)
Built-in LED light illuminates the work area via a separate switch
Great for mechanics, installers, fabricators and repair personnel
ISO certified
Kit contains driver; two 7.2-volt lithium ion batteries; 30-minute charger; one slotted and two Phillips fastening bits; one 1/8-inch drill bit; and carrying case.
Product Specifications
Length: 10-7/8" extended; 8-3/8" pistol grip
Net Weight: 1.1 lbs.
Warranty: Tool, 3 years; batteries, 1 year
Watts: 7.2 watt hours
Capacity: Metal, 1/8"-5/16" shank; wood, 7/8" to 1-3/4" length; bolt, 1/8"-5/16" shank; SDS bolt, 1/8"-1/4" shank
Chuck Size: 1/4" hex
Speed(s): 3,000 impacts/min.
Torque: 177 in.-lbs.
RPM: 2,300 no load
|
|
|
Heavy-Duty Job Site Radio (Milwaukee) Lot #828 (Sale Order 828 of 1039) The Job Site Radio is designed with high performance in mind and packs one mean audio wallop. Powered by a two-way Rockford Fosgate sound system with a three-stage Punch EQ bass boost, the radio provides both dominating audio energy and clarity.
Equipped with a high-end digital tuner and a flexible, 360-degree directional antenna, the radio provides crystal clear reception, even in remote areas. It is made with an impact resistant shell, steel handle and blow-molded base, all protecting the radio at the job site, campsite, workshop or any other tough environment.
The Job Site Radio can withstand an 8-foot drop to concrete. It operates on 120 volts AC power or 12-volt, 14.4-volt and 18-volt Milwaukee Power Plus batteries. It has an auxiliary stereo input jack for CD, MP3 or most other audio devices.
Additional excluisve features are weather-resistant polypropylene woofers and separate neodymium tweeters; station seek; 20-station preset; digital clock; FM stereo/mono; National Oceanographic and Atmospheric Administration (NOAA) weather band reception; 12-volt auxiliary power port for CD players and cell phone charging; audio accessory input; auxiliary antenna connection; 10-foot cord with pass-through plug that won't tie up outlets; and a detachable storage bag.
Product Specifications
Net Weight: 16.5 lbs.
Dimensions: 15-1/4" H x 19-1/2" W x 9-3/4" D
Volts: 120 AC; 12, 14.4, 18 DC
|
|
|
Heavy-Duty Worksite Radio & Charger (DeWalt) Lot #829 (Sale Order 829 of 1039) One-hour charger for 7.2- to 18-volt DeWalt battery packs (except Univolt)
AM/FM digital tuner (92 decibels) with LCD display, built-in clock, and eight station memory presets
Runs on 7.6- to 18-volt DeWalt batteries, making it a cordless radio
Auxiliary port allows connection to CD and MP3 players and portable satellite receivers with an audio cable (not included)
High efficiency weather resistant speakers with dual bass ports, for maximum bass and range
Dual pivoting 11-inch flexible antenna provides more durability and better reception
Weather sealed charger door opens easily for fast battery changes
DeWalt three-stage charging system provides maximum runtime and extends overall battery life
Product Specifications
Net Weight: 13.2 lbs.
|
|
|
Litheon 36V 1" SDS-Plus Rotary Hammer & Hammer Drill (Bosch) Lot #830 (Sale Order 830 of 1039) 1-inch solid bit capacity and 2.5-inch core bit capacity
Selector for modes for rotation only, rotary hammer and hammer only
Impact force of 2.2 foot-pounds
Litheon 36-volt batteries allow more battery charges, runtime and power
SDS-Plus bit system
Variable speed reversing trigger
Vario-Lock™ positioning rotates and locks chisel into 36 different positions
Tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Litheon fast charger can charge 36 batteries to 80 percent of capacity in 30 minutes
Integral clutch helps minimize torque reaction
Includes 360-degree auxiliary handle, carrying case, one-hour charger, depth gage and two Litheon batteries
Product Specifications
Net Weight: 9.6 lbs.
Volts: 36V
BPM: 0-4,260
Capacity: 1" concrete; 1-1/4" wood; 1/2" metal
Length: 15"
RPM: 0-960
|
|
|
Litheon Cordless Drill/Driver 10.8V I-Driver (Bosch) Lot #831 (Sale Order 831 of 1039) Tight spaces? No problem for the I-Driver from Bosch. Drill/driver kit includes carrying case, two 1.5-inch power drive bits, one 30-minute charger and two Litheon 10.8-volt batteries.
80 inch-pounds of torque drive 100 3-inch screws per battery charge
Ultra-compact head length -- 3.5 inches total head length, three times shorter than most popular competitor
90-degree articulating head rotates and locks into five positions for increased versatility
7-plus-1 electronic clutch for precision driving; eliminates over-torque in soft base materials; drill mode allows pilot and other small bore holes.
Forward/reverse button is equally useful at driving or removing screws
Quick change chuck prevents bit loss in drill or drive mode; pull to insert or release 1/4-inch hex shank bits
Hanger is convenient for tool storage between uses
Variable speed trigger -- revolutionary design provides increased sensitivity and control
Backed by Bosch's three-year ProVantage™ protection plan
Product Specifications
Length: 11-1/2"
Net Weight: 2.2 lbs.
RPM: 0-600 no load
Drive: 1/4" hex
Volts: 10.8
Torque: 80 in.-lbs.
|
|
|
Litheon Cordless Drill/Driver 10.8V Pocket Driver (Bosch) Lot #832 (Sale Order 832 of 1039) Bosch's Pocket Driver looks small but works big. It's very handy and easy to carry in a tool belt. Driver kit includes carrying case, two 1.5-inch power drive bits, one 30-minute charger and two Litheon 10.8-volt batteries. Backed by the Bosch ProVantage three-year protection plan.
80 inch-pounds of torque drive 100 3-inch screws per battery charge
Ultra-compact power and design; almost half the size of a 12-volt compact drill/driver
LED light for tight spaces and applications
Forward/reverse button is equally useful at driving or removing screws
Quick change chuck prevents bit loss in drill or drive mode; pull
10-plus-1 clutch enables precision driving and eliminates over-torquing in soft base materials; max mode allows pilot and other small bore holes
Variable speed trigger for increased sensitivity and control
Product Specifications
RPM: 0-400 no load
Torque: 80 in.-lbs.
Volts: 10.8
Length: 6-1/2"
Net Weight: 1.8 lbs.
|
|
|
Litheon Impactor 10.8V Fastening Driver (Bosch) Lot #833 (Sale Order 833 of 1039) Driver kit includes one carrying case, two 1.5-inch power drive bits, one 30-minute charger and two Litheon 10.8-volt batteries.
60 percent more torque than 18-volt drill/driver; 800 inch-pounds of max torque
LED light ring with three LEDs to illuminate work area for use in dark areas
Litheon 10.8-volt battery -- the most advanced lithium-ion battery available today
Spring-loaded impact mechanism reduces user fatigue
Aluminum gear housing with protective rubber front
1/4-inch hex drive with quick release
Ergonomic soft grip handle for extended comfort and control
Bumpers on side of tool to protect work surface and prevent slipping
Variable speed trigger for complete control
Backed by the Bosch three-year ProVantage protection plan
Product Specifications
RPM: 0-1,800 no load
BPM: 0-3,000 no load
Torque: 800 in.-lbs.
Net Weight: 2.2 lbs.
Volts: 10.8 V
Length: 6-1/2"
Drive: 1/4" hex
|
|
|
V28 Circular Saw (Milwaukee) Lot #834 (Sale Order 834 of 1039) The Milwaukee V28 cordless woodcutting circular saw is the most powerful ever produced in the industry. This revolutionary saw has the most power of any on the market. Nothing can top the performance of this tool in terms of speed of cutting or overall run time.
In addition, this saw comes standard with tactile grips for even more control while cutting. The lightweight magnesium guards reduce unnecessary weight without compromising operation. The high strength aircraft aluminum shoe resists bending for accuracy and dependability. With LED light for cutting visibility and over 200 cuts of 1-inch conduit per battery charge.
Saw kit includes two 28-volt batteries, one 1-hour charger, carrying case, circular saw blade, rip fence and Allen key.
Product Specifications
Net Weight: 9.4 lbs.
Blade Size: 6-1/2"
Length: 15-7/8"
Power: 28V DC, 3 amp hours
RPM: 4,200 no load
Spindle: 5/8"
Speed(s): Optimal 0-225/0-350 SFPM
Capacity: 2-1/8" @ 90°; 1-5/8" @ 145°; 1-13/32" @ 50°
Square Capacity: 4-3/4"
|
|
|
V28 Sawzall Reciprocating Saw (Milwaukee) Lot #835 (Sale Order 835 of 1039) The Milwaukee 0719 Cordless V28 Sawzall reciprocating saw uses a high powered Milwaukee-built motor to deliver faster cutting and performance.
Powering the 0719 is the revolutionary 28-volt lithium ion battery pack, exclusively from Milwaukee. This battery pack weighs less than an 18-volt one yet delivers two times the runtime, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge cutting capabilities.
This Sawzall saw has a 1-1/8-inch stroke length that delivers speed. The variable speed trigger delivers two range levels: 0 to 2,000 spm for metal cutting and other hard materials, and 0 to 3,000 spm for cutting in wood and other materials encountered.
The gear protecting clutch protects the tool against impact, delivering on the legendary Sawzall durability. The keyless shoe adjustment allows for better control in cutting and longer blade life. The Quik-Lok™ blade clamp makes changing blades a snap.
A comfortable non-slip soft grip handle provides a better gripping surface and reduces vibration and operator fatigue. Comes with two 28-volt batteries; one one-hour charger; carrying case; and two Sawzall blades.
Product Specifications
Length: 15-7/8"
Net Weight: 9.4 lbs.
Power: 28V DC, 3 amp hours
Speed(s): 0-2,000/0-3,000 spm
Strokes: 1-1/8"
|
|
|
Square Drive Cordless Impactool Lot #836 (Sale Order 836 of 1039) The most powerful and durable cordless impact in its class. Patent-pending IQv technology provides maximum performance, durability, and battery life. Compatible with both lithium-ion and nickel cadmium batteries. Ideal for general assembly, maintenance, and automotive and service work including suspensions, front-ends, brakes, engines, and autobody jobs.
Product Specifications
Net Weight: 4.7 lbs. (6.8 lbs. w/Ni-Cd, 6.2 lbs. w/Li-Ion)
Capacity: 19.2V
Length: 8.93"
BPM: 0-2200
Max Torque: 25-280 ft./lbs. (360 reverse)
Volts: 19.2V
|
|
|
Dremel Engraving Kit Lot #837 (Sale Order 837 of 1039) Engrave or decorate a wide variety of materials, including metal, plastic, glass, ceramic, wood and leather.
Personalize your valuables
Decorate metal, glass and stone for an individual touch
Stroke adjustment dial to regulate engraving depth from fine lines to deep grooves
Replaceable carbide point engraves on most surfaces
Optional 9929 diamond point (not included) for heavy-duty use on hard surfaces
Letter/number template helps etch words and numbers
Soft grip adds extra comfort and control
Light and compact design provides comfortable use for precision engraving performance
Product Specifications
Warranty: 2 years
Strokes: 7,200
Motor: 115V AC, 60 Hz, 2 amps
Net Weight: 12 oz.
|
|
|
Signature Engraver (Wen) Lot #838 (Sale Order 838 of 1039) Rotary tip action
Single speed control
Writes like a pencil
Diamond tip permanently engraves on any material, including wood, steel, plastic and glass
Excellent tool for home, hobby and craft work
Replaceable tip
Mark valuables to protect against theft
Product Specifications
Speed(s): 14,000 rpm no load
Net Weight: 2 oz.
|
|
|
150-Piece Dremel Rotary Tool Accessory Kit Lot #839 (Sale Order 839 of 1039) Accessory assortment includes everything you need to cut, grind, sand, polish, drill, sharpen, clean and more. Use mower and garden tool sharpener (also included) with #932 aluminum oxide grinding stone to sharpen garden tools and mowers.
Kit contains the following:
One high speed cutter
20 cutoff wheels
15 heavy-duty cutoff wheels
10 1-1/4" reinforced cut-off wheels
One 1/2-inch drum sander
Four 1/2-inch 60-grit sanding bands
Four 1/2-inch 120-grit sanding bands
One 1/4-inch drum sander
Three 1/4-inch 60-grit sanding bands
Three 1/4-inch 120-grit sanding bands
22 coarse sandpaper discs
24 medium sandpaper discs
22 fine sandpaper discs
One polishing compound
Four 1/2-inch felt polishing wheels
One felt polishing wheel
One paste brush
One carbon steel brush
Three aluminum oxide grinding stones
Two silicon carbide grinding stones
One dressing stone
One 1/8-inch drill bit
One mandrel
One mandrel with screw
One lawnmower/garden tool sharpener
Accessory case
|
|
|
Heat Gun (Makita) Lot #840 (Sale Order 840 of 1039) Compact and lightweight for easy handling
Strips paint and varnish, thaws frozen metal pipes, loosens tile and putty, remelts adhesives, and more
Variable temperature control for a wide variety of applications
Two-speed blower setting
Thermocouple control maintains precise temperature
Ceramic core protects heating element for longer tool life
Product Specifications
Net Weight: 1.3 lbs.
Volts: 120V AC
Temperature: 250° - 1100°F
OAL: 10"
CFM: 8 or 14
Watts: 1,500 AC only
Amp Rating: 12.5
|
|
|
Heat Gun (Ryobi) Lot #841 (Sale Order 841 of 1039) Three temperature settings, low (300° F), medium (600° F) and high (1,100° F). Includes scraper nozzle.
Product Specifications
Motor: 120V, 10 amps
Cord Length: 10 ft.
|
|
|
Heat Gun Kit (Wen) Lot #842 (Sale Order 842 of 1039) For softening and removing paint or varnish, thawing frozen metal pipes and more. Two heat settings. Kit includes heat gun and four deflector nozzles.
Product Specifications
Motor: 120V AC, 6/12.5 amps, 60 Hz AC
Cord Length: 6 ft.
Temperature: 482° F low, 842° F high
Watts: 700 low, 1,500 high
|
|
|
Professional Heat Gun (Milwaukee) Lot #843 (Sale Order 843 of 1039) Unique impact-resistant heating element
Efficient soft air velocity increases surface temperature much faster than conventional hot air heat guns
Three-position rocker switch -- off, high and low
Ergonomic style
Powerful heating elements
With stay-cool handles and heat shields, use the gun all day and stay cool
Lightweight
ISO certified
Product Specifications
Capacity: 14.8 CFM
Length: 10-1/8"
Net Weight: 1.6 lbs.
Temperature: 570°/1,000°F
Motor: 120V AC, 11.6 amps
|
|
|
Variable Temperature Heat Gun (Milwaukee) Lot #844 (Sale Order 844 of 1039) Rotate rear housing to select temperature
Impact resistant heating element
Efficient soft air velocity increases surface temperature to working temperature faster than conventional heat guns
Maintains higher surface temperature, allowing faster completion of standard commercial or industrial applications
Cool air inlet design allows air movement at peak efficiency, even when resting on support stand
Stand enables gun to be stationary for workbench or assembly work, freeing both hands for use
ISO certified
Product Specifications
Temperature: 140°-1,040° F
Volts: 120V AC
Amp Rating: 11.6
Net Weight: 1.6 lbs.
OAL: 10-1/8"
CFM: 14.8
|
|
|
Barrel Grip Jigsaw Kit (Bosch) Lot #845 (Sale Order 845 of 1039) Powerful 5-amp motor
Tool-free blade change system for fast and easy blade changes
Exclusive multi-directional blade clamp mechanism for superior hold
Low-vibration design ensures extremely smooth operation
Four-stage orbital action adjusts blade motion to match workpiece and cutting task
Low position roller guide ensures blade stability and precise cutting
Three-position dust blower
Adjustable die-cast aluminum footplate
Double insulated
UL listed and complies with OSHA standards
Rotating handle provides comfort when cutting intricate patterns
Takes Bosch T-shank jigsaw blades
Kit includes three assorted blades, T101DP, T118A and T144D; steel footplate insert kit; anti-splintering insert; plastic carrying case; and no-mar plastic footplate insert kit.
Product Specifications
Capacity: 3-3/8" (wood); 1-1/4" (plastics); 3/4" (aluminum), 3/8" (mild steel), 1/8" (stainless steel)
Strokes: 500-3,100 no load
Net Weight: 5.5 lbs.
Motor: 120V AC, 5 amps
Length: 10-5/8"
Stroke Length: 1"
|
|
|
Top Handle Jigsaw (Bosch) Lot #846 (Sale Order 846 of 1039) Features 6.4 amps -- the highest on the market
Precision Control system eliminates blade wander for precision cuts
One-Touch blade change; one-handed insertion and lever ejection
Quick bevel adjust cast aluminum foot
Easy-to-read scale under foot
Constant Response circuitry maintains desired speed for consistent performance
T-shank machined plunger
Robust three-point connection means no blade play
On/off blower switch
Variable speed trigger and dial
Four-position orbital control
Lock-on button
Comes complete with one precision wood blade, Progressor wood blade, tight kerf blade, zero-clearance insert, non-marring footplate and carrying case
Product Specifications
Strokes: 500-2,800 no load
Net Weight: 6 lbs.
Capacity: 1-1/4" plastic; 1/8" stainless; 3/8" mild steel; 45° bevel
Stroke Length: 1"
Motor: 6.4 amps, 120V, 50-60 Hz
|
|
|
4" AC Random Orbit Sander/Polisher (Wen) Lot #847 (Sale Order 847 of 1039) Specially designed to maximize versatility and performance, the orbital pattern assures no burning, while 4,000 orbits per minute work the cleaner or wax into the surface to provide complete job satisfaction.
Features:
SmartStart™ sands, scrubs, buffs and polishes
Wen® orbital technology
High torque .5 amp motor
10-foot heavy-duty power cord
Double insulated protection
Soft Touch™ comfort grip
Versa Pad™ hook & loop attachment
Versatile, time and labor saving tool
Each kit contains: System 4 orbital tool, 4-inch foam applicator pad, 4-inch scrub brush, 6-inch buffing pad, 4-inch lambswool polishing pad and three 4-inch sanding discs.
Product Specifications
Motor: 0.5 amp, 120V AC
Orbits: 4,000
Net Weight: 2 lbs.
Warranty: 2 year limited
Size: 4" or 6" pads
|
|
|
6" Variable Speed Random Orbit Polisher (Porter-Cable) Lot #848 (Sale Order 848 of 1039) Random, swirl-free polishing
Spiral/bevel gears
All ball and roller bearing construction
Standard equipment consists of polisher, polishing pad, wrench, side handle and operating manual
Product Specifications
Orbits: 2,500-6,000 no load
Thread: 5/16-24
Net Weight: 5-3/4 lbs.
Motor: 120V AC/DC, 50-60 Hz, 3.7 amps
Wheel Dia: 6"
Length: 11-1/2"
|
|
|
7" & 9" Electronic Variable Speed Polisher (DeWalt) Lot #849 (Sale Order 849 of 1039) Heavy-duty polisher has all ball bearing construction for long life
Electronic module maintains specified speed even under load
Conveniently-located variable speed dial lets user set maximum speed from 1,000 to 3,000 for different materials and applications.
Variable speed trigger allows user to instantly control speed from 0 to dialed setting
Locking spindle
Heat-treated, precision-cut gears for smooth operation
External brush caps for easy servicing
Spindle lock for easy pad changing
Tool package includes two-position side handle, rubber backing pad and clamp nut
Product Specifications
Spindle: 5/8-11
Motor: 8 amps, 1,400W
RPM: 0-1,000/0-3,000 no load
Length: 17.3"
Net Weight: 8.25 lbs.
|
|
|
7" Angle Polisher (Steelman) Lot #850 (Sale Order 850 of 1039) Ideal for ultra slow polishing or fast, powerful clear coat polishing
Quick start and quiet operation with no vibration
Overload protection and lock on switch
UL certified
Variable speed dial adjustment, trigger lock
Includes hook and loop backer pad, spanner wrench, D-handle, auxiliary handle, hex key wrench, retaining nut and replacement brush kit
Product Specifications
Cord Length: 10 ft.
Motor: 10.8 amps
Speed(s): 1,300-3,000 rpm no load
Spindle: M14 (5/8-11)
Net Weight: 8.6 lbs.
Dimensions: 16.5" L x 4" W x 4.5" H
|
|
|
7" Right Angle Sander/Polisher (Wen) Lot #851 (Sale Order 851 of 1039) Powerful sander makes quick work of sanding wood, metal, fiberglass and body filler
Converts quickly to a polisher for polishing cars, boats, planes and vans
Two-speed, two-position locking switch
Built-in tool rest for convenient attachment of bonnets and sanding discs
Spindle lock
Two-position auxiliary handle
Includes 7-inch backing pad, polishing bonnet, foam polishing pad, two sanding discs, spindle lock and auxiliary handle
Product Specifications
Warranty: 2 year limited
RPM: 1,100-1,350 no load
Speed(s): 2
Motor: 2/3 hp, 4 amps, 120V
Wheel Dia: 7" pad size
Net Weight: 5.2 lbs.
|
|
|
7" Sander & Polisher (Makita) Lot #852 (Sale Order 852 of 1039) Variable speed with pre-set maximum speed dial; ideal for ultra slow polishing
Electronic control maintains constant speed under load
Easily converts to a sander
Three-prong plug to prevent static electricity accumulation
Fast, powerful polishing for clear coat finishes
Lock-on button for continuous use at one speed
Includes hook and loop pad and hex wrench
Product Specifications
Net Weight: 6.6 lbs.
Length: 18.5"
RPM: 600-3,000
OAL: 19.5"
Motor: 120V AC, 10 amps
Spindle: 5/8"-11
|
|
|
1 HP Router (Makita) Lot #853 (Sale Order 853 of 1039) Contoured double handles for comfort and control
Large calibrated depth control ring
Shaft lock for quick changing of bits with just one wrench
All ball bearing construction
3-1/2 inch diameter detachable motor for use on commercial router bases
High speed motor for powerful, smooth cuts
Lightweight (5.5 pounds) for easy handling
Includes wrench and 1/4-inch collet
ISO certified
Product Specifications
RPM: 30,000 no load
Height: 7-1/8"
Motor: 7 amps, 1 hp max.
Net Weight: 5.5 lbs.
Collets: 1/4"
|
|
|
1-3/4 HP Router (Porter-Cable) Lot #854 (Sale Order 854 of 1039) Auto-release collet system ends "frozen" bits
Precision machined aluminum housing and base
Accurate micrometer depth-of-cut adjustment to 1/128 inch
100 percent sealed ball bearings
Dust sealed switch
Lever release height adjustment
Under table stop prevents motor from inadvertently rotating out of base
Standard equipment: router motor, base, 1/4-inch collet, collet wrenches and operating manual
ISO certified
Product Specifications
RPM: 10,000 to 27,000
Collets: 1/4", 1/2"
Motor: 1-3/4 HP, 120 VAC, 25-60 Hz, 11 amps
|
|
|
1-3/4 HP Router Kit (Porter-Cable) Lot #855 (Sale Order 855 of 1039) Includes Porter-Cable's fixed router and plunge router bases, so you get the versatility of two of the most popular routers today.
Other features:
Motor with lever release
Auto-release collet system ends "frozen" bits
2-1/2 inch plunge range with fully enclosed springs, depth rod and six-position step turret
Precision machined aluminum motor housing and base.
Accurate micrometer depth-of-cut adjustment to 1/128 inch
100 percent sealed ball bearings
Dust-sealed switch
Lever release height adjustment
Under-table stop prevents motor from inadvertently rotating out of place
Standard equipment: fixed and plunge bases, 1/4- and 1/2-inch collet, collet wrenches, carrying case and operating manual
Product Specifications
RPM: 23,000
Motor: 1-3/4 hp, 10 amps, AC only
|
|
|
1-1/8" x 21" Belt Sander (Makita) Lot #856 (Sale Order 856 of 1039) Variable belt speed
Compact and lightweight for close quarter work and excellent maneuverability
Ball and needle bearing construction for smooth operation and long tool life
Narrow belt and exposed front pulley for use in close quarters or on irregular shapes
Multi-position side handle for easy and more comfortable operation
Lock-on button for continuous operation
Connects to dust collector for a cleaner work environment
Includes two each abrasive belts, 40, 60, 80, 100 and 120 grit
ISO certified
Product Specifications
Belt Size: 1-1/8" x 21"
Capacity: 656-3,280 ft./min. (variable)
OAL: 15"
Motor: 115V, 5 amps
Net Weight: 4.6 lbs.
|
|
|
1/4 Sheet Palm Sander (Wen) Lot #857 (Sale Order 857 of 1039) Ideal for finish sanding surfaces prior to the application of stain and/or finishes
Ergonomic palm grip design for comfortable one-handed use
Dust-sealed switch prevents contamination and extends tool life
Easy to use paper clamp attachment for quick abrasive paper changes
High density foam base enhances finish quality
Sands flush on three sides
Dust bag for a cleaner work area and extended abrasive paper life
Includes abrasive sheets
Product Specifications
Capacity: 4-1/8" x 4-3/8" (pad); 1/4 sheet (paper)
Orbits: 10,000
Net Weight: 3 lbs.
Motor: 12V AC only, 60Hz, 1.5 amp input
Warranty: 1 year limited
|
|
|
3-1/4" Planer Kit (Makita) Lot #858 (Sale Order 858 of 1039) High power-to-weight ratio
Redesigned 4-amp motor delivers more output power for increased performance
Centerline balance with front and rear grips positioned for better control; helps eliminate gouging and uneven planing
Simple blade setting system for fast installation
Lock-on button for continuous operation
Precision machined aluminum base for planing accuracy
Equipped with double-edged tungsten-carbide mini blades for long life and smooth cutting
All ball bearing construction for long tool life
Double insulated and lightweight
Includes blade gage assembly, socket wrench, guide rule, double-edged carbide blade set and plastic tool case
ISO certified
Product Specifications
Capacity: Planing, 3-1/4" width, 1/32" depth
RPM: 15,000 no load
Net Weight: 5.5 lbs.
Motor: 115V, 4 amps
Length: 11-1/2"
|
|
|
4" x 24" Dustless Belt Sander (Bosch) Lot #859 (Sale Order 859 of 1039) Rugged design -- built for production sanding jobs, as well as jobsite applications
Magnesium transmission housing reduces tool weight
Adjustable front handle folds away for close work
Exclusive adjustable dust intake port allows use of non-woven belts up to 8 millimeters thick
Replaceable wear inserts protect housing from damage
Sands flush to vertical surfaces for sanding versatility
Accepts optional sanding frame, stand and fence for added versatility and accuracy
Lever-action belt release for quick belt release
Variable speed dial for fine finishing or fast stock removal
Steel platen protector pad and belt tracking adjustment knob
ISO certified
Includes sanding belt and dust bag assembly
Product Specifications
Belt Size: 4" x 24"
Capacity: 1,150-1,550 no load SFPM
Net Weight: 12 lbs.
OAL: 13.8"
Motor: 10.5 amps, 120/155V AC
|
|
|
4-1/2" Angle Grinder (Makita) Lot #860 (Sale Order 860 of 1039) Small circumference barrel grip (only 2.5 inches) for added comfort
Protective zigzag varnish seals motor from contaminants by forming a barrier under rotation
Labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels
6-amp motor design for high output power in a more compact tool
Thicker coil wires wound more closely to reduce heat and energy loss
Small barrel grip
Spindle lock
Easy wheel change
All ball bearing design and metal gear housing for durability
Gear housing can rotate 90 degrees for cutting applications
ISO certified
Includes 4.5-inch grinding wheel, wheel guard, lock nut, lock nut wrench, side handle and inner flange
Product Specifications
Capacity: 4-1/2" wheel; 3-1/2" wire cup brush; 4-1/2" sanding disc
Length: 10-1/8"
Motor: 6 amps, 120V
Net Weight: 3.1 lbs
RPM: 10,000 no load
Thread: 5/8-11 UNC
|
|
|
4-1/2" Disc Grinder (WT Import) Lot #861 (Sale Order 861 of 1039) Double insulated for operator safety
Versatile sander/grinder for industrial and home use
11,500 rpm for fast and efficient sanding, grinding, cutting and deburring
Includes guard, side handle and three free DeWalt depressed center discs
Product Specifications
Motor: 115V, 6.2 amps
Disc Diameter: 4-1/2" x 1/4" x 7/8"
RPM: 11,500
|
|
|
5" Random Orbit Finishing Sander (Milwaukee) Lot #862 (Sale Order 862 of 1039) Milwaukee's 5-inch random orbit sander produces a fine, swirl-free finish at 12,000 orbits per minute, with low vibration and all ball bearing construction. The sander uses standard 5-inch diameter sanding discs with eight holes that accept pressure sensitive adhesive sandpaper. Features a rocker-type switch with on/off guard. Includes a PSA pad. ISO certified.
Product Specifications
Orbits: 12,000 per min.; 3/32" dia.
Size: 5" dia. discs
Motor: 115V AC only, 1.8 amps
Length: 5-1/2"
Net Weight: 2.9 lbs.
Cord Length: 8 ft.
|
|
|
Finishing Sander with Dust Bag (Makita) Lot #863 (Sale Order 863 of 1039) Comfortable clamp lever for easy sandpaper installation
Dust bag for clean, efficient sanding with extended sandpaper life
Engineered to operate at low noise level with reduced vibration
All ball bearing construction for smooth operation
Double insulated
Includes one each abrasive papers #60, #100 and #150; one dust bag; and one punch plate
ISO certified
Product Specifications
Height: 5-3/8"
Net Weight: 2.1 lbs.
Orbits: 14,000
Size: Pad, 4-1/2" x 4"; abrasive paper, 4-1/2" x 5-1/2"
Amp Rating: 1.6
|
|
|
Portable Electric Chamfering Machine (WT Import) Lot #864 (Sale Order 864 of 1039) Ideal for chamfering large steel, aluminum, cast iron and hardwoods. Includes radius plate, chamfer guide, replacement carbide tips and brushes and hex keys. Chamfer angle is 45 degrees.
Product Specifications
Length: 12-1/2"
Motor: 1/2 hp, 110V, 60 Hz
RPM: 8,500
Net Weight: 5.5 lbs.
Capacity: .118" (3 mm)
|
|
|
Speed-Bloc Finishing Sander (Porter-Cable) Lot #865 (Sale Order 865 of 1039) Comfortable, easy-grip outer housing for hours of use without fatigue
Solid metal frame for precision seating and alignment of bearings, motor and fan, providing maximum in long, trouble-free tool life
Rubber posts isolate your hand from vibration while enabling full sanding action and efficiency on work
The smoothest finishing sander available today
100 percent ball bearings
Accepts pre-cut adhesive or self cut standard paper with metal stamp
Standard equipment: sander, abrasive sheet, clamp tool and operating manual
Product Specifications
Orbits: 14,000 per min.; 5/64" orbit
Net Weight: 4 lbs.
Motor: 120V AC/DC, 25-60 Hz, 1.2 amps
Length: 4-1/2"
Size: Accepts pad, 4-1/8" x 4-1/2"; paper, 4-1/2" x 5-1/2"
|
|
|
10" 3 HP Cut-Off Saws (Kalamazoo) Lot #866 (Sale Order 866 of 1039) For big job capacities -- 1.5-inch solids, 2.5-inch pipe
Swivel vise opens to 4 inches with fast lever lock
Sealed for life bearings
Switch
Less abrasive wheel
Vise included
Motor available in single or three-phase (please specify voltage; see voltage specs below)
Product Specifications
Motor: 3 hp TEFC, 3 ph., 220 or 440V (specify voltage)
Arbor: 5/8"
Net Weight: 110 lbs.
RPM: 3,450
Dimensions: 23" L x 10" W x 14" H
|
|
|
14" Abrasive Cut-Off Machine (Milwaukee) Lot #867 (Sale Order 867 of 1039) Milwaukee's 6176-20 cutoff machine has a powerful 15-amp motor designed for maximum cutting efficiency, performance and durability, allowing for fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels, tubing, Unistrut metal framing, EMT pipe and rebar up to a 5-inch maximum capacity.
Quick setup and quick release locking device hold material being cut securely during the cutting process
Material can be angle cut up to 45 degrees
Arm locks down for easy portability when moving tool to the jobsite
Heavy-duty cast iron base withstands daily jobsite abuse
Chain lockdown and large carrying handle for easy portability
Spindle lock makes abrasive wheel change easy
Comes with vise, abrasive wheel and hex wrench
Product Specifications
RPM: 3,900 no load
Length: 16"
Motor: 120V AC/DC, 15 amps, 2,400W, 3.2 hp max.
Opening: 9" max.
Capacity: 5" OD pipe; 3-5/8" bar stock; 5" sq. stock
Spindle: 1"
Wheel Dia: 14"
Bevel: 45°
Net Weight: 47.5 lbs.
|
|
|
14" Chop Saw (Metabo) Lot #868 (Sale Order 868 of 1039) Ideal for fast, precise cutting of steel, non-ferrous metals, cast iron and more
Lock-off button for safety
Pivoting wheel guard
All ball-bearing construction
Auto stop carbon brushes are easily accessible
Durable steel base
Quick-action clamping device with miter adjustment up to 45 degrees
Spindle lock for fast wheel changes
Includes 17-millimeter wrench and one-piece carrying case
Made in Germany
Product Specifications
Capacity: 4-3/4" pipe, 2-1/2" barstock, 4-3/4" x 5-1/8" section steel
Arbor: 1"
Motor: 120V AC, 15 amps
Net Weight: 45 lbs.
RPM: 3,900 no load
|
|
|
14" Cut-Off Saw (Makita) Lot #869 (Sale Order 869 of 1039) Twin pivot cutting head for increased capacity and efficiency
D-shaped handle for easy gripping
Lock-off button to help prevent accidental starting
Spark diversion guard for operator safety
Guide plate adjusts 45 degrees right and left; three locations for various material sizes
Quick release vise for secure stock retention and fast repeated cuts
Socket wrench stored on base for convenience
Adjustable depth stop for precise, repeatable cutting depth
Shaft lock for easy wheel changes
Comes with abrasive wheel, quick release vise and socket wrench
Product Specifications
Net Weight: 36.3 lbs.
RPM: 3,800 no load
Motor: 15 amps
Dimensions: 19-3/8" H x 10-1/4" W x 21-5/8" L
Blade Dia: 14"
Capacity: 4-1/2" @ 90° and 45°
Arbor: 5/8", 1"
|
|
|
14" Cut-Off Saw (WT Import) Lot #870 (Sale Order 870 of 1039) All ball bearing construction
Gear reduction
Switch lock for continuous operation
Permanent lubrication
Powerful 120-volt universal motor
Additional thermal overload switch prevents motor burnout
Includes 10 free 14-by-1/8-inch cut-off blades (a $67.50 value)
Product Specifications
Net Weight: 35.2 lbs.
Motor: 120V
Blade Size: 14"
|
|
|
16" Cut-Off Saw (WT Import) Lot #871 (Sale Order 871 of 1039) With enclosed belt cover.
Product Specifications
Net Weight: 220 lbs.
RPM: 2,720
Hole Size: 1"
Wheel Dia: 16"
Capacity: Steel pipe, 4" sq. by 1/4" thick; steel, 4" sq. x 3/8" thick @ 45°; round steel, 1-9/16"
Motor: 3 hp, 220V, 1 ph.
|
|
|
16" Cut-Off Saw with Quick Vise (WT Import) Lot #872 (Sale Order 872 of 1039) This item uses a quick vise feature and has an extended sawing bed for stability. Enclosed belt cover.
Product Specifications
Hole Size: 1"
Dimensions: 31" L x 15" W x 22" H
Round Capacity: 5"
Wheel Dia: 16"
Square Capacity: 4-3/4"
Capacity: 4-1/2" @ 45°
Net Weight: 210 lbs.
RPM: 2,930 no load
Motor: 3 hp, 220V, 3-ph.
|
|
|
5 HP Cut-Off Saws (Kalamazoo) Lot #873 (Sale Order 873 of 1039) Heavy-duty saw handles 2-1/2 inch solid round stock and 3-inch pipe with speed and efficiency
Extra heavy cast iron base, trunnion and arm
Sealed ball bearings
Positive, quick lock swivel vise opens to 4 inches
Less abrasive wheel
Dual V-belt drive
Includes bench saw, swivel vise and manual switch
Please specify voltage on 5-horsepower motor (see voltage specs below)
Product Specifications
Arbor: 1"
Dimensions: 22" L x 14" W x 24" H
Spindle Speed(s): 4,400 rpm
Type: 14" cut-off saw
Wheel Dia: 14"
Motor: TEFC, 5 hp, 3 ph., 220 or 440 V (specify voltage)
|
|
|
7" 1 HP Abrasive Cut-Off Saw (Kalamazoo) Lot #874 (Sale Order 874 of 1039) Cast iron base
Rigid alignment
Cuts 1-inch solid round, 2-inch pipe
Adjustable work length stop and down stop furnished
Less abrasive wheel
Product Specifications
Net Weight: 75 lbs.
Spindle Speed(s): 4,800 rpm
Dimensions: 22" L x 10" W x 14" H
Motor: 1 hp TEFC, 1 ph., 110/120V
Arbor: 1/2"
|
|
|
8" 3 HP Cut-Off Saws (Kalamazoo) Lot #875 (Sale Order 875 of 1039) Cast iron base
Rigid alignment
More capacity -- cuts 1-1/2 inch solid, 2-inch pipe
Standard front and rear spark deflectors
Switch
Less abrasive wheel
Single- or three-phase motor available (please specify voltage)
Product Specifications
Motor: 3 hp TEFC, 3 ph., 220 or 440V (specify voltage)
Spindle Speed(s): 4,900 rpm
Dimensions: 22" L x 10" W x 14" H
Arbor: 1/2"
|
|
|
14" Cutoff Saw (Bosch) Lot #876 (Sale Order 876 of 1039) Natural debris removal -- wheel rotation carries sparks, dust and debris away from operator
AC/DC capability extends tool versatility by working from DC outlets, such as welders and generators
Reinforced armature windings protect motor against abrasive dust and metal debris
Service Minder™ brushes eliminate guesswork and stop the tool when preventative maintenance is required
Reversible wraparound side handle mounts left or right for added convenience and versatility
Large footplate Improves stability and allows greater depth of cut; smooth on both sides for guiding
Double insulated
UL listed and complies with OSHA standards
Reversible fire position -- tool comes set up in fire forward position, but can be easily changed to reverse without additional accessories
Comes with auxiliary handle, wheel guard, adjustable footplate, inside and outside flanges, 7/8- and 1-inch arbor locking nuts, 3/8-inch and 6-millimeter Allen wrenches
Product Specifications
Depth: 4-7/8"
Motor: 120V AC/DC, 15 amps
RPM: 4,300 no load
Net Weight: 27 lbs.
Wheel Dia: 14"
Spindle: 5/8-11
|
|
|
2-Speed Deep Cut Portable Bandsaw (Milwaukee) Lot #877 (Sale Order 877 of 1039) Milwaukee's bandsaws are the choice of professionals. With high torque and powerful motor, this bandsaw will maintain a steady, optimum blade speed.
The excellent balance, high visibility and quick blade change system make this saw easy to work with. Using an all ball and roller bearing construction, and worm gear and chain drive mechanism, this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life -- no oiling is needed. ISO certified.
Includes impact resistant carrying case and one 14 TPI, 44-7/8 inch bimetal blade.
Product Specifications
Motor: 120V AC, 5/6 amps
Net Weight: 16 lbs.
Blade Size: 44-7/8" x 1/2" x .020"
FPM: 200/250 no load
Length: 20"
Cord Length: 8 ft. fixed
Rectangular Capacity: 3-1/2" x 4-1/2"
Round Capacity: 3-1/2"
|
|
|
Deep Cut Bandsaw (Milwaukee -- 350 SFPM) Lot #878 (Sale Order 878 of 1039) Milwaukee's bandsaws are the choice of professionals. With high torque and powerful motor, this bandsaw will maintain a steady, optimum blade speed. The excellent balance, high visibility and quick blade change system make the saw easy to work with.
Using an all ball and roller bearing construction, and worm gear and chain drive mechanism, this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life. No oiling is needed. Uses bimetal blades.
Product Specifications
Rectangular Capacity: 4-3/4" x 4-3/4"
Length: 19-3/4"
Motor: 120V AC only, 6 amps
Cord Length: 8 ft. fixed
Round Capacity: 4-3/4"
Blade Size: 44-7/8" x 1/2" x 0.20"
Net Weight: 17 lbs.
FPM: 0-350 no load
|
|
|
Portable Bandsaw Kit (Makita) Lot #879 (Sale Order 879 of 1039) Powerful motor for cutting in a wide variety of materials
Dual bearing blade guides and adjustable stopper plate
Variable speed dial for setting maximum cutting speed
Blade tightening lever for fast, easy blade installation
Kit includes bandsaw blade, hex wrench, wrench holder and tool case
Product Specifications
Blade Size: 44-7/8" x 1/2"
Rectangular Capacity: 4-3/4" x 4-3/4"
Length: 20-5/8"
Motor: 120V, 6.5 amps
Net Weight: 13.9 lbs.
Round Capacity: 4-3/4"
FPM: 200-350 no load
|
|
|
1-9/16" SDS-Max Combination Hammer (Bosch) Lot #880 (Sale Order 880 of 1039) SDS-Max® bit system provides tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
"Combination" dual mode selector provides two modes of operation: rotary hammer and hammer only
Auto-Max® dial is variable speed and automatically ensures maximum speed and power every time the tool is plugged in
Constant Response™ circuitry provides soft start, maintains constant speed under load and provides overload protection
Turbo™ power delivers 20 percent more power in hammer only mode
Service Minder™ light indicates when preventative maintenance is required
Power light ensures operator that power feed is live
Innovative service modules designed so qualified service technician can quickly replace the brushes and cord
Vario-Lock™ positioning
Patented cord turret provides added flexibility and reduces cord wear
Vibration dampening handle reduces vibration up to 40 percent, providing uncompromising user comfort for extended periods of work
360-degree auxiliary handle provides a wide range of movement, along with operator comfort
Integral clutch helps minimize torque reaction.
Grounded design; UL listed
Complies with OSHA standards
Includes auxiliary handle and carrying case
Product Specifications
Length: 17-1/4"
Motor: 120V, 11 amps
BPM: 1,700-3,300 no load
RPM: 170-340 no load
Capacity: Concrete, 1-9/16"; core bit, 4"; through hole bit, 2-1/2"
Net Weight: 14 lbs.
|
|
|
1/2" Compact Hole Shooters (Milwaukee) Lot #881 (Sale Order 881 of 1039) With big power in a compact body, these Milwaukee drills are easy to use with their extra long handles. The drills are made for two-handed operation, which is nice for large hole drilling or material mixing -- these drills have the power to handle it.
Units feature a 450 or 650 rpm operating speed; 8-foot fixed cord; and helical-cut heat treated gears for quiet performance. Includes pipe handle. ISO certified.
Product Specifications
Spindle: 5/8 -16
Length: 12-1/4"
Net Weight: 11.4 lbs.
RPM: 450 no load
Motor: 120V AC, 7 amps
Chuck Size: 1/2" keyed
|
|
|
1/2" D-Handle Hole Shooters (Milwaukee) Lot #882 (Sale Order 882 of 1039) If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7-amp motors and heat treated metal gears, these are truly the choice of the professional.
Quik-Lok cord detaches for tangle-free carrying and storage. The drill also can be used with Milwaukee's right angle drive attachment to increase versatility. Includes side handle and chuck key with holder. ISO certified.
Product Specifications
Length: 14-3/4"
Net Weight: 6.8 lbs.
Spindle: 1/2-20
Power: 120V AC, 7 amps
RPM: 0-500 no load
Chuck Size: 1/2" keyed
|
|
|
1/2" Dual Torque Hammer Drill (Bosch) Lot #883 (Sale Order 883 of 1039) Bosch-built high-output 8.5-amp motor
1/2-inch three-jaw chuck for rugged hammer drilling applications
Dual-mode selector easily converts from rotation only to hammer drill
Patented rotating brush plate provides equal power in reverse to easily back out bound-up bits and doubles brush life
Pistol-grip handle; compact, ergonomic design with soft grip
Variable-speed reversing trigger for accurate bit starting, as well as removing fasteners or bound bits
Two-speed gearbox lets you select high-speed or high-torque applications
360-degree auxiliary handle with built-in depth gage for wide range of movement along, with consistent drilling depth
Ambidextrous lock-on button helps reduce fatigue
Integral slip clutch helps minimize torque reaction
Metal gear housing for long life and rugged jobsite durability
Patented cord turret allows cord to pivot 35 degrees on a ball joint for added flexibility and longer cord life
Drill comes complete with 360-degree auxiliary handle, depth gage and carrying case
Product Specifications
Motor: 120V AC, 8.5 amps
Cord Length: 12 ft.
Spindle: 1/2-20
Capacity: 1.5" wood, 1/2" steel (1/4" in 2nd), 3/4" concrete
Net Weight: 6 lbs.
Length: 13-1/4"
RPM: 0-1,100/0-3,000
BPM: 0-18,000/0-48,000
|
|
|
1/2" Heavy-Duty Hammer Drill (Milwaukee) Lot #884 (Sale Order 884 of 1039) Dual torque/speed ranges
For percussion drilling with carbide-tipped hammer-drill bits in concrete and masonry or drilling without hammering in wood or metal
Trigger speed control
All ball and roller bearings
Side handle that can be used on either side and with or without depth gage
Self-stopping brushes
Reversing
Cushion grip handle
Product Specifications
Length: 13"
BPM: 0-22,000 low, 0-40,000 high
Capacity: 1-1/2" flat boring bit; 3-3/4" hole saw; 1-1/4" auger bit and ship auger bit; 1-3/4" self-feed bit; 1/2", 1/4" twist drills; 3/4", 3/8" hammer concrete
Motor: 120V AC only, 7.5 amps
RPM: 0-1,350 low, 0-2,500 high (no load)
Net Weight: 6 lbs.
|
|
|
1/2" Heavy-Duty High Speed Drill/Driver (Bosch) Lot #885 (Sale Order 885 of 1039) Heavy-duty keyed chuck
8-amp all ball bearing motor
Variable speed, soft grip trigger, with reversing switch for greater control
Two-finger trigger design and lock-on button for ease of operation
Ergonomic handle with soft grip for increased comfort
Precision cut steel gears
Magnesium front housing for increased durability
Extra long rubber cord with three-prong grounded plug
360-degree auxiliary handle
Product Specifications
Spindle: 1/2-20
Cord Length: 8 ft.
Length: 11-1/4"
Torque: 472 in.-lbs.
RPM: 0-850 no load
Net Weight: 5 lbs.
Motor: 120V AC, 8.0 amps
|
|
|
1/2" Heavy-Duty Right Angle Drill Kit (DeWalt) Lot #886 (Sale Order 886 of 1039) Three speed ranges offer versatility of matching the appropriate speed to the application
Die-cast metal gear housing for jobsite durability and tool reliability
Five-position side handle offers improved control and versatility in all drilling applications
360-degree right angle attachment improves access to confined areas for increased productivity
Triple gear reduction provides increased torque and reduces gear stress.
Kit comes complete with chuck key and holder, five-position side handle, Allen wrench and heavy-duty storage box
Product Specifications
RPM: 400/600/900 no load
Capacity in Wood: 1-1/2" spade bit, 2-9/16" self-feed, 4" hole saw, 1-1/2" auger bit
Net Weight: 9.75 lbs.
Motor: 7 amps, 580W
Chuck Size: 1/2"
Capacity in Steel: 1/2" twist bit, 5" hole saw
|
|
|
1/2" Heavy-Duty Single Speed VSR Hammer Drill (DeWalt) Lot #887 (Sale Order 887 of 1039) Features 6.7-amp motor that provides high performance and overload protection
Dual mode: hammer drill or drill for wood, steel or masonry applications
Lightweight design for extended use and less user fatigue
Two-finger trigger for increased comfort
360-degree side handle with depth rod offers greater control, versatility and increased depth accuracy
Variable speed allows for precise hole placement on work surface
Includes 360-degree side handle, depth rod and chuck key with holder
Product Specifications
RPM: 0-2,700 no load
Motor: 6.7 amps, 550W
Capacity: 1/2" steel; 1-1/4" wood; 3/16"-3/8" concrete (1/2" concrete max.)
BPM: 0-46,000
Length: 11-1/2"
Net Weight: 3.85 lbs.
|
|
|
1/2" Heavy-Duty Spade Handle Drill (DeWalt) Lot #888 (Sale Order 888 of 1039) Variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling
0 to 550 rpm provides increased torque for drilling and mud mixing
Motor provides enough power for any job site application
Light weight increases user productivity and decreases user fatigue
Soft grip handle provides superior comfort and ergonomics
Two-position rear spade handle and three-position side handle give greater control for all drilling and mixing applications
Product Specifications
Capacity in Steel: 3" hole saw
Net Weight: 7.5 lbs.
Watts: 580 out
Capacity in Wood: 1-1/2" spade bit; 2-9/16" self-feed; 5" hole saw; 1-1/2" auger bit
Chuck Size: 1/2"
RPM: 550 no load
Gear Reduction: Triple
Amp Rating: 9
|
|
|
1/2" Heavy-Duty VSR Dual Range Hammer Drill Kit (DeWalt) Lot #889 (Sale Order 889 of 1039) 7.8-amp motor provides high performance and overload protection
High/low speed for high speed drilling or high torque applications
Dual mode: hammer drill or drill for wood, steel or masonry applications
Lightweight design for less user fatigue
Two-finger trigger for increased comfort
360-degree side handle with depth rod offers greater control, versatility and increased depth accuracy
Variable speed allows for precise hole placement on work surface
Includes 360-degree side handle, depth rod and chuck key
Product Specifications
BPM: 0-19,000/0-46,000
Capacity: 1/2" steel; 1-1/2" wood; 3/16"-3/8" optimal in concrete; 1/2" concrete max.
RPM: 0-1,100/0-2,700 no load
Length: 13"
Net Weight: 4.8 lbs.
Motor: 7.8 amps, 650W
|
|
|
1/2" Hole-Hawg Drill (Milwaukee) Lot #890 (Sale Order 890 of 1039) Power and torque -- those are about all that need to be said about Milwaukee's Hole-Hawg® line of drills. The compact design of this drill makes it perfect for drilling between studs and joists.
Features:
Unit will handle up to a 4-5/8-inch self-feed bit
Extra long pipe handle helps control power
Fixed cord
Triple gear train
Two speed ranges greatly increase the drill's versatility
High torque and speed make the drill the perfect choice for the heavy-duty user
ISO certified
Carrying case and pipe handle included
Product Specifications
Cord Length: 8 ft.
Chuck Size: 1/2" keyed
Length: 6-1/2"
Motor: 120V AC, 7.5 amps
Net Weight: 11.5 lbs.
RPM: 300/1,200
Spindle: 5/8-16
|
|
|
1/2" Keyed Electric Drill (WT Import) Lot #891 (Sale Order 891 of 1039) Heavy-duty, reversible, double insulated powerful 6-amp motor.
Reduction gearing powers you through the toughest jobs
Ball and needle bearing construction
Removable auxiliary handle
Built-in chuck key
Permanently lubricated
Product Specifications
Chuck Size: 1/16"-1/2" heavy-duty
Net Weight: 7-3/4 lbs.
Cord Length: 6 ft.
|
|
|
1/2" Keyed Magnum Variable Speed Reversing Drill (Milwaukee) Lot #892 (Sale Order 892 of 1039) Powerful Milwaukee-built 5.5-amp motor
Removable brush cartridge system allows you to change brushes in less than one minute, with only a screwdriver
Self-stopping brushes; includes spare brush stored in cartridge
Aluminum gear case and diaphragm supply greater support for shaft and bearings
Heavy-duty industrial chucks
Trigger speed control reversing switches
All ball and roller bearings
Helical cut, heat-treated gears for heavy-duty industrial/construction applications
Double gear train
Includes chuck, chuck key, rubber flex key holder, side handle, and 8-foot three-wire Quick-Lok cord with quick detachment from tool for tangle-free carrying and storage
Product Specifications
Length: 10-1/2"
Chuck Size: 1/2"
Spindle: 1/2-20
RPM: 0-850 no load
Net Weight: 4.8 lbs.
Motor: 120V AC, 5.5 amps
|
|
|
1/2" Magnum Hole Shooter (Milwaukee) Lot #893 (Sale Order 893 of 1039) This heavy-duty Magnum® drill is built for industrial/construction applications. It features raw power with a Milwaukee-built, 5.5-amp motor, reversing, and Quik-Lok cord that can be quickly removed from the drill for storage or service replacement.
Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites. The keyless chuck makes accessory changes quick and easy. ISO certified.
Product Specifications
Net Weight: 4.9 lbs.
RPM: 0-850 RPM
Motor: 120V AC, 5.5 amps
Spindle: 1/2-20
Length: 10-1/2"
Chuck Size: 1/2"
|
|
|
1/2" Magnum Keyed Variable Speed Reversing Drill (Milwaukee) Lot #894 (Sale Order 894 of 1039) All metal gear case and diaphragm
360-degree positive side lock handle
New switch with two-finger trigger
Modular brush card design
All ball and roller bearings
Double gear train
Drill comes with 1/2-inch keyed chuck and key and flexible key holder
Product Specifications
RPM: 0-850 no load
Net Weight: 5.4 lbs.
Motor: 120V AC, 8 amps
Length: 12-13/64"
Chuck Size: 1/2"
Spindle: 1/2-20
|
|
|
1/2" Reversible D-Handle Drill (Makita) Lot #895 (Sale Order 895 of 1039) Double insulated
Rocker switch for easy one-handed reversing
D-handle rotates 360 degrees
Double gear reduction
Ball and needle bearing construction
Heavy-duty industrial 1/2-inch drill chuck for positive bit retention
Handy chuck key retained in handle
Includes top handle, drill chuck and key
ISO certified
Product Specifications
Speed(s): 550 rpm
Motor: 6.3 amp, 115V
|
|
|
1/2" Right Angle Drill (Milwaukee) Lot #896 (Sale Order 896 of 1039) D-handle power and a right angle drive head make this drill package perfect for stud and joist drilling.
Powerful 7-amp motor and three speed ranges make this a versatile tool that will handle a wide range of applications. Unit comes in an impact resistant carrying case and includes a side handle for ease of operation.
Other features:
Hndles up to 4-5/8 inch self-feed bit
Quik-Lo cord
Trigger speed control in two ranges
Head and handle swivel 360 degrees
Includes carrying case, right angle drill assembly, side handle, 9/16-inch open end wrench, 3/16-inch socket wrench and chuck removal bar
Product Specifications
Net Weight: 10.3 lbs.
Capacity in Steel: 1/2"
Chuck Size: 1/2"
Motor: 120V AC, 7.0 amp
Cord Length: 8 ft.
RPM: 0-335/0-750 w/RAD (0-500 no load)
Length: 16-3/4"
|
|
|
1/2" Variable Speed Reversing Drill (Makita) Lot #897 (Sale Order 897 of 1039) Variable speed (0-550 rpm) for controlled drilling
Heavy-duty 1/2-inch industrial quality drill chuck
Compact and lightweight (4.8 pounds)
Large and conveniently located reversing switch and lock-on button
Side handle can be attached to either side of the tool for better control
Convenient belt clip
Double insulated
Comes with drill chuck and key and side handle
Product Specifications
RPM: 0-550 no load
Motor: 6.5 amp
Length: 11-1/4"
Net Weight: 4.8 lbs.
Capacity: 1/2" steel, 1-3/8" wood
|
|
|
3/4" Super Hole Shooter Drill (Milwaukee) Lot #898 (Sale Order 898 of 1039) The tool man's dream, the Super Hole Shooter has the most hand-held power available. From turning the largest bits into steel, to powering grain augers or other equipment that requires portable power, the Super Hole Shooter line of drills can handle it. Pipe handle included. ISO certified.
Product Specifications
Net Weight: 19 lbs.
RPM: 350 no load
Spindle: #3 Jacobs taper
Length: 18-1/2"
Chuck Size: 3/4" keyed
Motor: 120V AC/DC, 10 amps
|
|
|
3/8" Angle Drill (Makita) Lot #899 (Sale Order 899 of 1039) Built-in white LED light is shockproof, illuminates drilling area, increases visibility and never needs replacing for entire tool life
Powerful 4-amp motor
Lightweight, compact design for easy use when working between framing studs or any other close quarter applications
Variable speed for controlled drilling in wood or metal and speedy fastening
Paddle switch with speed limiting dial to prevent over-tightening of fasteners and for easy one-handed operation
Reduced head height (2-5/8 inches) for working in limited space
Ball bearing construction for longer motor life
Chuck key and key holder included
Product Specifications
Capacity: 13/16" wood, 3/8" steel
Length: 10-5/8"
Motor: 4 amps
Net Weight: 3.1 lbs.
RPM: 2,400 no load
|
|
|
3/8" Electric Angle Drill (WT Import) Lot #900 (Sale Order 900 of 1039) Ergonomic design with 55-degree angled chuck for easy access to confined working areas. Comfortable grip with paddle switch. Reversible. Includes blow molded case. UL listed.
|
|
|
3/8" Heavy-Duty VSR Right Angle Drill (DeWalt) Lot #901 (Sale Order 901 of 1039) 100 percent ball bearing construction provides durability and longer tool life
Compact right-angle design for easy access in tight places
Paddle switch is ideal for use in awkward positions and limited access areas
Shielded chuck protects user and improves grip in confined areas
Double gear reduction increases torque performance and decreases gear stress
Product Specifications
Chuck Size: 3/8"
RPM: 0-1,200 no load
Motor: 3.7 amps, 200W
Capacity in Steel: 3/8" twist bit, 3/4" hole saw
Capacity in Wood: 1-1/8" spade bit, 1-1/8" hole saw
Net Weight: 3.75 lbs.
|
|
|
3/8" High Torque Heavy-Duty VSR Drill (Bosch) Lot #902 (Sale Order 902 of 1039) Low profile and small chuck offset ideal for drilling in close quarters
One-handed keyless chuck
Variable speed, soft grip trigger, with reversing switch for greater control
Two finger design and lock-on button for ease of operation
Ergonomic handle with soft grip for increased comfort
Precision cut steel gears
Magnesium front housing for increased durability
Extra long cord with three-prong grounded plug
360-degree auxiliary handle
Product Specifications
Torque: 368 in-lbs.
Cord Length: 8 ft.
Spindle: 1/2 -20
RPM: 0-1,100
Net Weight: 4.7 lbs.
Motor: 120V AC, 7.5 amps
Drive: 3/8"
Length: 10"
|
|
|
3/8" Keyed Variable Speed Reversing Drill (Makita) Lot #903 (Sale Order 903 of 1039) Large trigger switch for easy operation
Variable speed (0 to 2,500 rpm) for drilling in a wide variety of materials
Inline handle design for better control
Large recessed lock-on button
Conveniently located reversing switch
All ball bearing construction for durability and long life
Includes chuck with key
Product Specifications
Amp Rating: 4.9
RPM: 0-2,500 no load
Net Weight: 3.1 lbs.
Capacity: 3/8" steel, 1" wood
Length: 10-9/32"
|
|
|
3/8" Keyless Variable Speed Reversing Drill (Makita) Lot #904 (Sale Order 904 of 1039) Keyless chuck for fast, easy bit installation and removal
Large trigger switch for easy operation
Variable speed (0 to 2,500 RPM) for drilling in a wide variety of materials
Low decibel rating (79) for quieter operation
Inline handle design for better control
Large recessed lock-on button
Conveniently located reversing switch
All ball bearing construction for durability
Keyless chuck included
Product Specifications
Capacity: 3/8" in steel; 1" in wood
Length: 10-9/32"
Motor: 115V, 4.9 amps
Net Weight: 3.1 lbs. (w/battery)
RPM: 0-2,500 no load
|
|
|
3/8" Keyless Variable Speed Reversing Drill (Wen) Lot #905 (Sale Order 905 of 1039) Essential tool for any workshop or household
For drilling, driving or loosening fasteners
Powerful motor delivers torque needed to drill through the hardest woods
Keyless chuck makes bit changes fast and simple
Double insulated, two-wire power cord and two-prong plug eliminates grounding
Product Specifications
Amp Rating: 4.2
Volts: 120V AC only, 60 Hz
Net Weight: 3.6 lbs.
RPM: 0-3,000
Chuck Size: 3/8" keyless
|
|
|
3/8" Magnum Keyed VSR Drill (Milwaukee) Lot #906 (Sale Order 906 of 1039) Powerful 2-amp motor
Variable speed control
All-metal gear case and diaphragm
Ergonomic, tactile grip on handle and motor housing
360-degree locking side handle
Two-finger trigger switch design
Modular brush card design
All ball and roller bearings
Keyed chuck included
Product Specifications
RPM: 0-1,200 RPM no load
Spindle Dia: 1/2"
Net Weight: 4.2 lbs.
Motor: 120V AC only, 7 amps
Length: 12.1"
Capacity: 3/8" in steel
Thread: 20
|
|
|
3/8” Close Quarter Angle Drill (Milwaukee) Lot #907 (Sale Order 907 of 1039) Double gear train; metal framed for longer gear life
Large paddle trigger for smooth control and easy grip in any position
Angled chuck for reaching close quarters other drills cannot reach
Convenient forward/reverse lever is easy to use in close quarters
Angled cord exit keeps cord out of the work area
Textured palm grip reduces slipping
Soft grip handle
Double insulated construction
Chuck key with holder included
Product Specifications
Cord Length: 8 ft.
Net Weight: 3.9 lbs.
Chuck Size: 3/8" keyed
Amp Rating: 3.5
Spindle: 1/2 in.-20
Volts: 120
OAL: 11"
Speed(s): 0-1,300 rpm no load
|
|
|
7/8" SDS-Plus Bulldog Rotary Hammer (Bosch) Lot #908 (Sale Order 908 of 1039) Aggressive performance in concrete, combined with versatile features
D-handle design for extra control; ideal for overhead and downward drilling applications
SDS-Plus bit system for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Multi-function selector features three operation modes: rotation only, rotary hammer, and hammer only mode
Variable speed reversing trigger for accurate bit starting, as well as removing fasteners or bound bits
Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle
360-degree auxiliary handle with built-in depth gage gives a wide range of movement along with consistent drilling depth.
Integral clutch helps minimize torque reaction
Double insulated
UL listed
Complies with OSHA standards
Includes auxiliary handle, depth gage and carrying case
Product Specifications
Capacity: 3/16"-5/8" optimal
RPM: 0-1,100 no load
Hole Size: 7/8" concrete (2-1/2" thin wall core bit); 1/2" steel; 1" wood
Length: 17.5"
BPM: 0-6,150 no load
Motor: 6.9 amps, 120V
Cord Length: 12 ft.
Net Weight: 6.5 lbs.
|
|
|
10" Industrial Deluxe Grinders (Baldor) Lot #909 (Sale Order 909 of 1039) General purpose grinding. Shapes parts by removing material. Motor is rated 1 or 1.5 horsepower, making it possible to grind very large objects.
Features are cast iron wheel guards and tool rests, water pot, tool tray and two lighted eye shields, wired through grinder switch on single phase units only to turn lights on and off with grinder. Designed to comply with OSHA standards under normal conditions.
Product Specifications
Warranty: 3 years
Net Weight: 141 lbs.
Type: With switch, less cord & plug
Grit: 36, 60
Motor: 1 hp, 1 ph., 115/230V, 60 Hz
Wheel: Two 10" x 1" x 7/8"
RPM: 1,725
|
|
|
10" Industrial Grinders (Baldor) Lot #910 (Sale Order 910 of 1039) For general purpose grinding. Shapes parts by removing material. Motor is rated 1 or 1.5 horsepower, making it possible to grind very large objects.
Cast iron wheel guards and tool rests and exhaust type guards. Designed to comply with OSHA standards under normal usage.
Product Specifications
Warranty: 3 years
Type: With switch, less cord & plug
Grit: 36, 60
Wheel: Two 10" x 1" x 7/8"
Net Weight: 131 lbs
Motor: 1 hp, 1 ph., 115/230V
RPM: 1,725
|
|
|
12" Heavy-Duty Grinders (Baldor) Lot #911 (Sale Order 911 of 1039) Heavy-duty general purpose grinding. Casting is heavy cast iron. Grinder is used to smooth parting lines and gate areas. Price includes manual starter and lighted eye shields. Designed to comply with OSHA standards under normal usage. Maximum wheel width of 2 inches.
Product Specifications
Warranty: 3 years
Wheel: 12" dia. x 2" W max.
Net Weight: 240 lbs.
HP: 3 hp, 3 ph., 575V, 60 Hz
RPM: 1,725
|
|
|
14" Heavy-Duty Grinders (Baldor) Lot #912 (Sale Order 912 of 1039) Used for heavy-duty grinding applications and specifically for foundry and fabrication shop use. Grinds castings and weldments and prepares parts for welding. The motor is rated 5 or 7.5 horsepower and will handle large pieces for grinding.
Includes manual starter and lighted eye shields. Maximum 3-inch wheel width. Designed to comply with OSHA standards under normal usage.
Product Specifications
Net Weight: 348 lbs.
RPM: 1,425/1,725
Motor: 7-1/2 hp, 3 ph., 575V, 50/60 Hz
Warranty: 3 years
Wheel: 14" dia. x 3" W max.
|
|
|
6" & 8" Bench Grinders (WT Import) Lot #913 (Sale Order 913 of 1039) Heavy-duty ball bearing capacitor start motors
Includes two grinding wheels and safety shields
Lubricated for life; shielded ball bearing motor ensures a smoother grinding performance
Enclosed capacitor motor
Adjustable spark deflectors
Motor and wheels are dynamically balanced for even rotation
Dust exhaust engineered to increase air flow
Product Specifications
RPM: 3,450
Arbor: 5/8"
Net Weight: 33 lbs.
Wheel: 8" x 3/4"
Motor: 1/2 hp, 115V, 1 ph.
|
|
|
6" Bench Grinder (WT Import) Lot #914 (Sale Order 914 of 1039) Coarse and fine wheels. Also includes light, notched tool rest for drill sharpening and safety shields.
Product Specifications
Wheel: 6"
Motor: 1/5 hp, 110V, 60 Hz
|
|
|
6" Big Red Bench Grinder (Baldor) Lot #915 (Sale Order 915 of 1039) General purpose grinding. Used for shaping objects by removing material. Sharpens small tools. Non-exhaust type wheel guards are non-exhaust and with GA10 eyeshields. Designed to comply with OSHA standards under normal usage.
Product Specifications
RPM: 3,600
Net Weight: 29 lbs.
Motor: 1/3 hp, 1 ph., 115V, 60 Hz, 3.1 amps
Warranty: 3 years
Wheel: 6" dia. x 3/4" W x 1/2" hole
|
|
|
6" Heavy-Duty Bench Grinder (DeWalt) Lot #916 (Sale Order 916 of 1039) Powerful 5/8-horsepower induction motor for heavy-duty grinding operations
Industrial cast iron base and motor housing provide durability and prolong life
Motor that runs at 3,450 rpm for high-speed material removal
Precision-machined aluminum tool rests allow user to accurately position work
Rear exhaust ports in wheel guards for smoother operation
12.5-inch distance between wheels for longer and larger grinding applications
Includes 36- and 60-grit wheels, eye shields, spark deflectors, tool rests (adjustable) and adjusting wrench.
Product Specifications
Length: 15"
Wheel Dia: 6"
Length: 15"
Spindle: 1/2"
RPM: 3,450 no load
Net Weight: 28.5 lbs.
Net Weight: 28.5 lbs
Motor: 5/8 hp, 4 AC amps
Motor: 5/8 HP, 4 AC amps
Spindle: 1/2"
RPM: 3,450 no load
Wheel Dia: 6"
|
|
|
7" Deluxe Grinders (Baldor) Lot #917 (Sale Order 917 of 1039) General purpose grinding. Used for shaping objects by removing material. Sharpens small tools. Suitable for heavy grinding because of 1/2-horsepower motor and 7-inch wheels.
All models supplied with water pot, tool tray and two lighted eyeshields (wired through grinder switch on single phase units only to turn lights on and off with grinder). Models do not have tool grinding attachment. Designed to comply with OSHA standards under normal usage.
Product Specifications
RPM: 3,450
Net Weight: 82 lbs.
Motor: 1/2 hp, 1 ph., 115V/230V, 60 Hz
Wheel: Two 7" x 1" x 5/8"
Type: With 3-conductor cord & plug
Grit: 36, 60
Warranty: 3 years
|
|
|
7" Grinders (Baldor) Lot #918 (Sale Order 918 of 1039) General purpose grinding. Used for shaping objects by removing material. Sharpens small tools. Suitable for heavy grinding because of 1/2-horsepower motor and 7-inch wheels. All units supplied with non-lighted eye shields. Designed to comply with OSHA standards under normal usage.
Product Specifications
Net Weight: 70 lbs.
RPM: 3,450
Warranty: 3 years
Motor: 1/2 hp, 1 ph., 115/230, 60 Hz
Type: 3-conductor cord & plug; cast iron tool rests
Wheel: Two 7" x 1/2" x 5/8"
Grit: 36, 60
|
|
|
7" 2-Speed Deluxe Grinder (Baldor) Lot #919 (Sale Order 919 of 1039) General purpose grinding. Used for shaping objects by removing material. Sharpens small tools. Suitable for heavy grinding because of 1/2 horsepower motor and 7-inch wheels. Cast iron wheel guards and tool rests and exhaust type guards. Includes lighted eye shields, wired through grinder switch to turn lights on and off with grinder.
Product Specifications
Warranty: 3 years
RPM: 1,725/3,450
Motor: 1/3 (low), 1/2 (high) hp, 1 ph., 115V/230V, 60 Hz
Wheel: Two 7" x 1" x 5/8"
Net Weight: 94 lbs.
Grit: 36, 60
|
|
|
8" 1/2-HP Bench Grinder (WT Import) Lot #920 (Sale Order 920 of 1039) With adjustable light. Heavy-duty ball bearing capacitor start motor. Includes two grinding wheels, safety shields and adjustable spark deflectors.
Product Specifications
Motor: 1 ph., 115V, 3.8 amps
RPM: 3,600
Wheel: Two 8" x 1" x 5/8"
|
|
|
8" Grinder & Polisher (WT Import) Lot #921 (Sale Order 921 of 1039) Heavy-duty ball bearing motor. Includes one cotton polishing wheel and one grinding wheel. Motor and wheels are balanced for even rotation. Safety shield and adjustable spark deflector on grinding wheel side of the machine.
Product Specifications
Wheel Dim: Cotton, 8" dia. x 3/4" th. x 3/4" hole; grinding, 8" dia. x 3/4" th. x 5/8" hole
Motor: 1/2 hp, 110V/220V
RPM: 3,600 no load
Dimensions: 15-3/4" L x 9-1/2" W x 7-7/8" H
|
|
|
8" Heavy-Duty Bench Grinder (DeWalt) Lot #922 (Sale Order 922 of 1039) 3/4-horsepower induction motor that provides superior power for industrial grinding applications
Rugged cast iron base and motor housing provide durability and prolonged life.
Motor runs at 3,600 rpm for high-speed material removal
Precision-machined aluminum tool rests allow user to accurately position work
Rear exhaust ports in wheel guards provide a smoother operation
12-1/2-inch distance between wheels for larger and longer grinding applications
Product Specifications
Motor: 3/4 HP, 4.2 AC amps
Spindle: 5/8"
Net Weight: 39.5 lbs.
Length: 16"
Wheel Dia: 8"
RPM: 3,600 no load
|
|
|
8" Variable Grinder with Tool-Less Quick Change (Delta) Lot #923 (Sale Order 923 of 1039) Variable speed for grinding, sharpening or buffing
Quick change variable speed system on front
Sharpening wheel allows you to sharpen a variety of materials
Cast-iron base minimizes operating vibration
Flexible gooseneck lamp for clear view of grinding wheels and workpiece
Includes adjustment wrench and diamond wheel dresser
Product Specifications
Hole Size: 5/8"
Motor: 3 amp, 60 Hz, 1 ph.
Shaft Size: 5/8"
Net Weight: 48 lbs.
Wheel: 8" x 1"
Dimensions: 14-3/4" W x 19-1/2" L x 13-1/4" H
Arbor: 5/8"
Face Dia: 1"
RPM: Variable (1,725-3,450)
|
|
|
8" 3/4 HP Deluxe Industrial Grinders (Baldor) Lot #924 (Sale Order 924 of 1039) General purpose grinding. Used for shaping and objects by removing material and to sharpen tools. The 3/4-horsepower motor is suitable for heavy grinding. Includes water pot, tool tray and two lighted eye shields (wired through grinder switch to turn lights on and off with grinder).
Product Specifications
Warranty: 3 years
Wheel: Two 8" x 1" x 3/4"
Type: Includes 3-conductor cord & plug
Net Weight: 114 lbs.
Grit: 36, 60
RPM: 3,450
Motor: 3/4 hp, 1 ph., 115V/230V, 60 Hz
|
|
|
8" Industrial Grinders (Baldor) Lot #925 (Sale Order 925 of 1039) General purpose grinding. Used for shaping and objects by removing material and to sharpen tools. The 3/4-horsepower motor is suitable for heavy grinding. Features are cast iron wheel guards and tool rests and exhaust type guards. Designed to comply with OSHA standards under normal usage.
Product Specifications
RPM: 3,450
Net Weight: 97 lbs.
Motor: 3/4 hp, 1 ph., 115/230V, 60 Hz
Wheel: Two 8" x 1" x 3/4"
Grit: 36, 60
Warranty: 3 years
Type: Includes 3-conductor cord & plug
|
|
|
Buffing Machines (JET) Lot #926 (Sale Order 926 of 1039) These buffers from JET are true industrial buffing machines and are designed for years of work. The long shafts make it easy to move and workpieces around the wheels. The motor is totally enclosed and permanently lubricated.
For woodworkers, a sanding and buffing machine is useful for sanding irregularly shaped pieces, such as cabriole legs, toys and wooden parts. For you turners out there, a buffing machine can polish bowls, spindles and turnings to a high luster.
Knobs, hinges and other metal parts used in casework can be polished to a mirror finish, and old tools and other items can be reconditioned to look almost like new. Add a pneumatic drum and flap sander, and your sanding capabilities will grow considerably.
JET makes the buffers in two speeds—1,725 rpm (slower for plastics) and 3,450 rpm (best for most applications). Get the advantage of a multi-purpose sanding and buffing machine and put it to work in your shop. Includes bushings and collars.
Product Specifications
Motor: 1 hp, TEFC, 115V
Net Weight: 100
Thread: 5/8"
Arbor: 1" dia., 8" L threaded end
RPM: 3,450
|
|
|
Carbide Grinders (Baldor) Lot #927 (Sale Order 927 of 1039) The Baldor carbide tool grinder is used for sharpening carbide tipped or high speed steel machine tools. This grinder accommodates silicone carbide or aluminum oxide cup wheels that are 6 inches in diameter. GA8 dresser uses diamond tool nib 7/16 inch in diameter and 1 inch long. Wheels, dresser and nib sold separately.
Product Specifications
Wheel: Cup wheel, 6" dia. x 1-1/2" face x 4" recess x 1" D
RPM: 3,450
Type: With 3-conductor cord & plug
Motor: 1/2 hp, 1 ph., 115V, 60 Hz
Net Weight: 110 lbs.
|
|
|
Carbide Tool Grinder (WT Import) Lot #928 (Sale Order 928 of 1039) Accommodates wheels 6 inches in diameter, steel-backed with 1-1/4 inch hole. Also accepts diamond wheels. Single phase grinder is powered with capacitor-run motor, with no auxiliary moving parts. Protractor indicates angle up to 45 degrees. Has two 12 by 6-3/4 inch tool tables. Water pot with spout and faucet can be mounted over either wheel.
Product Specifications
Motor: 1/2 hp, 10 amps, 115V
Table Tilt: 45° up & down
RPM: 3,450
Wheel Dia: 6"
Table Size: 11-3/4" x 4-1/8"
Wheel Dia: 6" max.
|
|
|
Industrial Abrasive Belt Grinders (Baldor) Lot #929 (Sale Order 929 of 1039) Baldor's industrial belt grinders are used for fast material removal when shaping and deburring objects. Three position titable or stationary grinders available.
Product Specifications
Idle RPM: 0-3,600
Includes: Adjustable speed control; start/stop switch; 8' 3-conductor cord & plug
Type: 3-position tiltable; not UL listed or CSA certified
Motor: 1-1/2 hp, 1 ph., 115V, 60 Hz
|
|
|
Industrial Bench Grinders (JET) Lot #930 (Sale Order 930 of 1039) Pre-lubricated and enclosed ball bearings
Cast iron wheel guards and dust vents
One-piece quick adjusting spark guards
Large eye shields with quick adjustment
Adjustable tool rests
Heavy-duty guarded toggle switch on 8- and 10-inch models
Rubber mounts prevent movement
Fine and coarse vitrified wheels included
Product Specifications
Motor: 1-1/2 hp, 115V, 1 ph.
Dimensions: 24-1/2" L x 12-1/4" H x 13" D
Wheel Dia: 10" D x 1" W x 1" B
|
|
|
Industrial Buffers (Baldor) Lot #931 (Sale Order 931 of 1039) Baldor industrial buffers are made to be used only with soft cloth buffing wheels and buffing compounds. Used for buffing and polishing objects to various degrees of luster.
Specific buffing applications may require the addition of operator safety devices. Consult with a safety engineer before installation. Prices include flanges and nuts but not wheels. All three-phase buffers must be connected for their specific voltages.
Product Specifications
Motor: 3 hp, 3 ph., 230/460V, 60 Hz
Warranty: 3 years
Idle RPM: 3,600
Net Weight: 158 lbs.
Includes: Manual starter, connected at factory for 230V; specify voltage
|
|
|
Industrial Grinder/Buffers (Baldor) Lot #932 (Sale Order 932 of 1039) The 6-inch models are good for general purpose grinding (with the 36-grit wheel). Useful for wire brisking. Removes scale and rust and deburrs small parts. Wheel guards are non-exhaust type.
The 7-inch models also for general purpose grinding. Used for shaping objects by removing material and to sharpen small tools. Suitable for heavy grinding because of 1/2-horsepower motor and 7-inch wheels.
Use the 8-inch for general purpose grinding (with the 36-grit wheel). Wire brush is used to remove scale and rust. Deburrs large objects. The 3/4-horsepower motor is suitable for heavy grinding. Models have exhaust type guards.
All grinder models have non-lighted eyeshields. They are designed to comply with OSHA standards under normal usage. Full three-year warranty on all Baldor grinders.
Product Specifications
Type: Cast iron tool rests; switch, 3-conductor cord & plug; exhaust type guards
Includes: 7" x 1" x 5/8" wheel; wire brush
Motor: 1/2 hp, 1 ph., 115V/230V, 60 Hz
Net Weight: 69 lbs.
Warranty: 3 years
|
|
|
1/4" Die Grinder (Makita GEO600) Lot #933 (Sale Order 933 of 1039) Lightweight for controlled grinding operations
High speed for maximum production
All ball bearing construction for long tool life
Accepts metal cutters and burrs for production work
Double insulated
Comes complete with wheel point, 1/4-inch collet and #10 and #17 wrenches
Product Specifications
Collets: 1/4"
Length: 11-1/8"
Motor: 2 amps, 115V
Net Weight: 2 lbs.
RPM: 25,000 no load
Wheel Dia: 3/4" max.
|
|
|
1/4" Die Grinder (Milwaukee 5192) Lot #934 (Sale Order 934 of 1039) Grinding in tight places around irregular surfaces is the specialty of this Milwaukee® die grinder. This model comes with 1/4-inch collet but will accept 1/8-inch as well
A full array of mounted points allows you to grind many shapes and diameters. At 21,000 rpm with a 4.5-amp motor, this tool means business.
Other features:
All ball and roller bearings
Maximum 2-inch reinforced or 1-5/8-inch non-reinforced wheel can be attached to this versatile grinder for deburring and shaping
On/off toggle switch
ISO certified
Grinder comes with collet and 11/16-inch and 1/2-inch open end wrenches
Product Specifications
RPM: 21,000
Net Weight: 4.5 lbs.
Motor: 120V AC/DC, 4.5 amp
Length: 13-1/2"
Collets: 1/4"
Cord Length: 8 ft.
|
|
|
1/4" Die Grinder (Milwaukee 5196) Lot #935 (Sale Order 935 of 1039) This Milwaukee die grinder offers more power for heavy-duty jobs. The 5196 comes with a 1/4-inch collet but will accept 1/8-inch as well. A full array of mounted points allows you to grind many shapes and diameters. At 14,500 rpm with an 11-amp motor, this tool attacks even the toughest grinding jobs.
Other features:
All ball and roller bearings
Maximum 2-inch reinforced or non-reinforced wheel can be attached to this versatile grinder for deburring and shaping larger workpieces
Trigger switch on back handle
ISO certified
Comes with collet, fixed cord, and 11/16-, 1/2- and 1-inch open end wrenches
Product Specifications
RPM: 14,500 no load
Collets: 1/4"
Length: 21-1/2"
Motor: 120V AC/DC, 11 amps
Net Weight: 7.8 lbs.
Cord Length: 9 ft.
|
|
|
2-Speed MultiPro Cordless Kit (Dremel) Lot #936 (Sale Order 936 of 1039) Ready to go on a minute's notice, this two-speed cordless tool and the 50 included bits are perfect for a wide variety of do-it-yourself jobs inside or out. Capable of doing almost anything the standard MultiPro does -- except plug into an electrical outlet -- you'll want to keep it charged up and handy at all times.
Two speeds -- 10,000 and 20,000 rpm -- match proper speed required
Knurled collet nut for fast accessory changes; no wrench needed
Removable battery pack allows use of additional packs for continuous use
Three-hour charger with LED light shows proper charging
Compact and lightweight for easier handling and less fatigue
Product Specifications
Power: 7.2V DC
Net Weight: 11 oz.
|
|
|
4-1/2" Sander/Grinders (Milwaukee) Lot #937 (Sale Order 937 of 1039) 1.6 maximum horsepower with long-life brushes
High-output fans provide high performance power for grinding, cutting and finishing operations
Paddle switch with integrated lock-off button allows multiple hand positions to ease operator fatigue
Optimum speed for various accessories, including resin-bonded abrasives, wire brushes, resin fiber discs and abrasive flap discs
Cast aluminum gear housing with recessed spindle lock makes accessory changes fast and easy with single wrench operation
Three-position large flanged side handle eases operator fatigue
Adjustable wheel guard for tool-free adjustment
Lock-on button for continual operation
Includes side handle, spanner wrench, grinding disc, guard and flange set
Product Specifications
Thread: 5/8-11
RPM: 10,000
Size: 14" L x 5" W
Net Weight: 4.9 lbs.
Motor: 120V AC/DC (1,200 watts/1.6 hp max.)
Capacity: 4-1/2"
Amp Rating: 8.5
|
|
|
4-1/2" Angle Grinder (Metabo W7-115) Lot #938 (Sale Order 938 of 1039) Robust Metabo Marathon motor
Die-cast aluminum gear housing
Metabo S-automatic torque limiting clutch
Spindle stop
Metabo "Quick" tool change
Additional VibraTech handle for vibration dampening
Adjustment of protective hood without tools
Ergonomic shape for fatigue-proof rough grinding
Metabo winding protection grid
Auto-stop carbon brushes
Extensive accessory range increases tool versatility
Made in Germany
Product Specifications
Length: 11"
Watts: 750
Amp Rating: 7
RPM: 10,000 max. no load
Arbor: 7/8"
Spindle: 5/8-11
Net Weight: 4.8 lbs
Torque: 19 in.-lbs. max
Wheel Dia: 4-1/2" max.
|
|
|
4-1/2" Heavy-Duty Small Angle Grinder (DeWalt D28110) Lot #939 (Sale Order 939 of 1039) Motor designed for faster material removal and higher overload protection
Quick-change wheel release provides easier and quicker wheel removal without a wrench
Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces
Oversized protected spindle lock button provides easier and quicker wheel changes
Two-position removable side handle provides increased comfort and control
Slim, ergonomic body design provides increased comfort in extended use applications
5/8"-11 spindle thread accepts a wide range of 4-1/2 inch accessories
Comes with one two-position side handle, depressed center wheel, adjustable guard and wrench
Product Specifications
Motor: 7 amps, 800W
RPM: 11,000 no load
Net Weight: 4.10 lbs.
Spindle: 5/8-11
Length: 10-3/4"
|
|
|
4-1/2" Heavy-Duty Small Angle Grinder (DeWalt D28402) Lot #940 (Sale Order 940 of 1039) Heavy-duty 4-1/2" small angle grinder has an 11,000 rpm motor designed for faster material removal and higher overload protection
Low profile jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces
Quick-Change™ wheel release provides easier and quicker wheel removal without the need for a wrench
Keyless adjustable guard provides tool-free guard adjustment, thus increasing productivity
Vibration-reducing removable side handle provides user comfort and reduces user felt vibration.
Oversized protected spindle lock button provides easier and quicker wheel changes.
Dust Ejection System™ provides durability by ejecting dust particles that enter the tool through the air intake vents
One-piece brush arm prevents brush hangup due to dust ingress
Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Paddle switch lockoff provides user protection from accidental startup
Matching wheel flanges allow the use of common accessories
Comes with two-position side handle, depressed center wheel, keyless adjustable guard and wrench
Product Specifications
RPM: 11,000 no load
Net Weight: 4.6 lbs.
Length: 11-1/4"
Motor: 10 amps, 1,200W
Spindle: 5/8"-11
|
|
|
4-1/2" Paddle Switch Grinder (Bosch) Lot #941 (Sale Order 941 of 1039) Paddle switch with lock-on for better operator comfort and control
Vibration control handle reduces vibration up to 60 percent, providing uncompromising comfort for extended periods of work
AC/DC capability extends the tool's versatility by working from DC outlets, such as welders and generators
Sealed switch keeps debris out of the switch mechanism and extends life
ServiceMinder™ brushes eliminate guesswork; they stop the tool when preventative maintenance is required
Epoxy coated field windings provide ultimate protection against abrasive dust and metal debris
5/8" -11 spindle has wide flexibility for mounting most popular accessories -- accepts 3-inch wire cup brush and 4-inch wire wheel
Tool-free adjustable guard for quick guard installation and adjustments
Spindle lock for quick wheel changes
Directed air flow unique design diverts dust away from switch and vital components
Includes guard, vibration-control auxiliary handle, flange kit, spanner wrench and abrasive wheel
ISO certified
Product Specifications
Net Weight: 4.3 lbs.
Length: 11-1/4"
Spindle: 5/8-11
Wheel Dia: 4-1/2"
RPM: 11,000 no load
Motor: 8 amps, 1.1 hp, 120V AC/DC
|
|
|
4-1/2" Small Angle Grinder (Bosch) Lot #942 (Sale Order 942 of 1039) Specifically designed and angled to a "natural" position for maximum comfort and control
Powerful motor
Lock on/off switch for extended use applications
Service Minder™ brushes eliminate guesswork, and stop the tool when preventative maintenance is required
Precision spiral bevel gears are quality engineered and constructed for smooth power transmission
5/8"-11 spindle for quick wheel changes
Spindle lock has wide flexibility for mounting most popular accessories
Two-position auxiliary handle
Double-insulated
UL listed
Complies with OSHA standards and ISO certified
Comes complete with one guard, auxilliary handle, flange kit with inner and outer wheel flanges, spanner wrench and abrasive wheel
Product Specifications
Spindle: 5/8-11
Brush Size: 3"
Motor: 6 amps, 1 hp max., 120V AC
Net Weight: 4.6 lbs.
Length: 9-3/4"
Wheel Dia: 4-1/2"
Disc Diameter: 4-1/2"
|
|
|
5" Angle Grinder (Makita) Lot #943 (Sale Order 943 of 1039) Has a powerful 9 amp motor, yet lightweight for high production work with less fatigue
Ball bearing construction for long tool life
Removable side handle can be installed on either side of tool for operator comfort
Spindle lock for easy accessory changes
AC/DC for use with alternative power sources
Lock-on button for continual use operation
Double insulated
Includes one grinding wheel, wheel guard, side handle, inner flange, lock nut, lock nut wrench and spindle washer
ISO certified
Product Specifications
Disc Diameter: 5"
RPM: 10,000 no load
Net Weight: 6.6 lbs.
Length: 14"
Amp Rating: 9
Brush Size: 3-1/2"
Wheel Dia: 5"
Thread: 5/8"-11
|
|
|
5" Angle Grinder (Metabo) Lot #944 (Sale Order 944 of 1039) Robust Metabo Marathon motor
Die-cast aluminum gear housing
Metabo S-automatic torque limiting clutch
Spindle stop
Metabo "Quick" tool change
Additional VibraTech handle for vibration damping
Adjustment of protective hood without tools
Vario Constamatic (VC) full-wave electronics
Thumb wheel for speed pre-selection
Electronic soft start
Metabo winding protection grid
Auto-stop carbon brushes
Versatile applications through extensive range of accessories
Made in Germany
Product Specifications
Wheel Dia: 5"
Spindle: 5/8"-11
Watts: 900 input; 510 output
Amp Rating: 7.5
RPM: 10,000 max. no load
Torque: 22 in.-lbs.
Net Weight: 4.2 lbs.
|
|
|
5" Angle Sander/Grinder (Milwaukee) Lot #945 (Sale Order 945 of 1039) For those who want a bit more time between wheel changes and have a bit more room to work, the 6141 5-inch, 5.5-amp grinder offers solutions to limited space grinding. Its low profile and light weight make it perfect for those lighter duty sanding and grinding projects
The tool is double insulated (two-prong cord) and incorporates the industry standard 5/8-11 threaded arbor. Like its heavy-duty big brothers, it also has spiral bevel gears for optimum transmission of torque to the workpiece.
The comfortable body grip style is easy to hold onto, and in conjunction with the supplied side handle, allows for maximum operator control. The side handle can be attached in three locations.
The wheel guard can be moved around the spindle -- without the use of tools -- for greatest operator protection.
Sold as a grinder with guard, this tool can be used as a sander when a 5-inch backing pad and disc are attached. Includes guard, grinding wheel, side handle, flange, flange nut and spanner wrench.
Other features:
Double insulated
Spindle lock
8-foot fixed cord
Paddle-type switch
ISO certified
Product Specifications
Length: 10.5"
Capacity: 5"
RPM: 10,000 no load
Motor: 120V AC/DC, 5.5 amps, 0.7 HP max.
Net Weight: 6.3 lbs.
Spindle: 5/8" - 11
|
|
|
6" Angle Grinder (Metabo) Lot #946 (Sale Order 946 of 1039) Robust Metabo Marathon motor
Die-cast aluminum gear housing
Metabo S-automatic torque limiting clutch
Spindle stop
Metabo "Quick" tool change
Additional VibraTech handle for vibration dampening
Adjustment of protective hood without tools
High torque
Tacho Constamatic (VC) full-wave electronics
Electronic soft start
Overload protection
Metabo winding protection grid
No-volt release switch
Auto-stop carbon brushes
Versatile applications through extensive range of accessories Tool-less guard adjustment
Two-position side handle
Electronic winding temperature monitor with LED display
Made in Germany
Product Specifications
Length: 12"
Arbor: 7/8"
RPM: 9,000 no load
Max Torque: 31 in-lbs.
Spindle: 5/8"-11
Net Weight: 5.6 lbs.
Motor: 12 amps, 1,400 watt
|
|
|
6" Industrial Angle Grinder (Makita) Lot #947 (Sale Order 947 of 1039) Super joint system helps prevent kickback and gear damage
Five-stage variable speed control
Tool-less wheel guard adjustment
Labyrinth construction seals and protects the motor and bearings
Current limiter helps prevent burnout
Accessories include 6-inch grinding wheel, lock nut wrench, side handle, inner flange and guard
ISO certified
Product Specifications
Length: 11-3/4"
Wheel Dia: 6" (grinding & cut-off); 3" wire cup brush; 6" sanding disc.
Spindle: 5/8"-11 UNC
Net Weight: 5.3 lbs
Amp Rating: 12
RPM: 4,000-9,000
|
|
|
7" & 9" Angle Grinder (Milwaukee) Lot #948 (Sale Order 948 of 1039) Combining ergonomic comfort with powerful performance and outstanding durability, this 15-amp, 4 maximum horsepower sander will get the job done.
As a sander, this tool can be used with a 7- or 9-inch backing pad for removing paint or rust from metal, plastic or fiberglass surfaces.
The tool is one of the lightest in its class and has an angled rear handle and side handle for more natural hand positions and increased user comfort. A two-finger trigger switch, three-position side handle and conveniently located spindle lock also contribute to the user's comfort. Spiral bevel gears transfer maximum torque for heavy-duty jobs. Sold as a sander, this tool can be converted to a grinder by purchasing a 7- or 9-inch guard, which is easily attached. It has a low-profile gearcase for getting into tight spots and a built-in aluminum tool rest.
Grinding applications remove more material and may be used to shape metal. Standard features also include epoxy-coated motor windings for extended durability and a motor access port. Double insulated for operator safety. ISO certified.
Product Specifications
Cord Length: 9 ft. fixed
RPM: 6,000 no load
Disc Diameter: 7" or 9"
Spindle: 5/8"-11
Length: 19-1/4"
Net Weight: 11.8 lbs.
Motor: 4 hp max., 120 V AC/DC, 15 amps
|
|
|
7" & 9" Large Angle Sander (Bosch) Lot #949 (Sale Order 949 of 1039) Vibration control side and main handles reduce vibration up to 60 percent, providing uncompromising user comfort for extended periods of work
Metal gear cover for maximum durability
Lock-on/off switch for extended use applications
AC/DC capability extends versatility by working from DC outlets, such as welders and generators
Epoxy-coated field windings provide ultimate protection against abrasive dust and metal debris
Precision spiral bevel gears
Quality engineering and construction for smooth power transmission
Service minder brushes eliminate guesswork; stops tool when preventive maintenance is required
Includes vibration control auxiliary handle
ISO certified
Product Specifications
Net Weight: 10.5 lbs.
Length: 17-1/2"
Spindle: 5/8-11
Wheel Dia: 7" or 9"
RPM: 6,000 no load
Motor: 15 amps, 3 hp, 120V AC/DC
|
|
|
7" Angle Grinder (Fein) Lot #950 (Sale Order 950 of 1039) Safety lock prevents uncontrolled starts following power supply interruption
Safety switch prevents accidental activation
Powerful motor generates impressive power for high stock removal
Slow start prevents recoil
Adjustable handle allows user to position the tool at different angles on the work surface
Product Specifications
Net Weight: 12 lbs.
Thread: 5/8"-11
RPM: 8,500 no load
Warranty: 3 years
Amp Rating: 17
Wheel Dia: 7"
Cord Length: 13 ft.
Watts: 2,000
|
|
|
7" Angle Grinder (Makita) Lot #951 (Sale Order 951 of 1039) 15-amp motor delivers more output power for increased performance
6,600 rpm for fast stock removal and high production efficiency
Large trigger switch with lock-on feature for continuous operation
Labyrinth construction seals motor and bearings from contamination
Switch handle can be rotated 90° left and right
Automatic brush cut-out system
Large shaft lock for easy wheel changes
Accepts 7-inch grinding wheels, 6-inch wire cup brushes, or 7-inch sanding discs
Double insulated
Comes with one 7-inch grinding wheel, side handle
ISO certified
Product Specifications
Motor: 15 amps
Length: 18-1/2"
Net Weight: 10.6 lbs.
RPM: 6,600 no load
Thread: 5/8"-11 UNC
|
|
|
7" Heavy-Duty Angle Grinder (Milwaukee) Lot #952 (Sale Order 952 of 1039) Combining ergonomic comfort with powerful performance and outstanding durability, this 15-amp, 4 maximum horsepower grinder will get the job done.
The tool is one of the lightest in its class and has an angled rear handle and a side handle for more natural hand positions and increased user comfort. A two-finger lock-on trigger switch, three-position side handle and conveniently located spindle lock also contribute to the user's comfort.
Spiral bevel gears transfer maximum torque for heavy-duty jobs. Sold as a grinder, this tool can be converted to a sander by purchasing a 7- or 9-inch backing pad assembly, which is easily attached.
The grinder has a low profile gear case for getting into tight spots and a built-in aluminum tool rest. Grinding applications remove more material and may be used to shape metal. Standard features also include epoxy-coated motor windings for extended durability and a motor access port. ISO certified.
Product Specifications
Capacity: 7"
Length: 19-1/4"
Net Weight: 13.7 lbs.
Motor: 4 max. HP, 15 amps, 120V AC/DC
Spindle: 5/8"-11
RPM: 6,000 no load
|
|
|
Contour Sanding Kit (Dremel) Lot #953 (Sale Order 953 of 1039) The Dremel contour sander is a compact, lightweight tool that provides ultra-smooth results on a variety of surfaces and materials. Use it to sand contoured surfaces such as spindles, curved moldings and grooves, as well as flat surfaces, such as shutters, slats and wood details. With multiple contour shapes and variable speeds, it has the power and precision you need to virtually eliminate hand sanding. Never miss a spot again -- reaches even the tightest areas.
Quick change accessory release
Reusable sanding tubes
Cool running ball bearing construction
Easily replaceable brushes
Kit contains the following:
Variable speed tool
10 sanding contours
Detail sanding pad
Three sanding tubes
Three sheets hook and loop paper
Vacuum hose
Instruction manual
Tool case
Product Specifications
Strokes: .06" length; 4,100-10,000 spm; inline, reciprocating strokes
Net Weight: 1.75 lbs.
Cord Length: 6 ft.
Motor: 120V AC, 1.15 amp
|
|
|
Dremel 300 Series Rotary Tool & 25-Piece Kit Lot #954 (Sale Order 954 of 1039) The Dremel® 300 Series rotary tool offers the precision and control required to complete a wide range of projects, from fine art to home repair. Its variable speed control allows you to set the speed of the tool to match a particular accessory or the task at hand.
Lightweight design for easier handling and better tool control
"Dovetail" feature for Dremel-exclusive attachments
Onboard tool storage that keeps wrench close at hand
Ball bearing universal motor brushes for five times longer motor life and smooth, quiet operation
Improved convenient collet lock button for quick, easy accessory changes
Click-and-set on/off switch allows precise speed selection
Replaceable motor brushes extend tool life
Kit consists of:
Rotary tool and case
#150 drill bit
#191 high speed cutter
#401 mandrel
#402 mandrel
#412 medium sanding disc (10 each)
#420 HD emery cut-off wheel (two each)
#421 polishing compound
#425 emery wheel
#426 fiberglass cut-off wheel
#429 large felt wheel
#430 coarse 1/4-inch sanding drum
#431 coarse 1/4-inch sanding band
#438 fine 1/4-inch sanding band
#952 aluminum oxide stone
#84922 silicon carbide stone
Product Specifications
Motor: 120V AC, 1.15 amp, 50-60 Hz
Cord Length: 6 6'
RPM: 5,000-35,000 variable
Net Weight: 18 oz.
Pieces: 10
|
|
|
Dremel 300 Series Rotary Tool 55 Piece Kit Lot #955 (Sale Order 955 of 1039) The Dremel® 300 Series rotary tool offers the precision and control required to complete a wide range of projects - from fine art to home repair. Its variable speed control allows you to set the speed of the tool to match a particular accessory or the task at hand. Other features:
New dynamic design for additional comfort and control
Lightweight design for easier handling and better tool control
"Dovetail" feature for Dremel-exclusive attachments
Onboard tool storage that keeps your wrench close at hand
Ball bearing universal motor brushes for five times longer motor life and smooth, quiet operation
Improved convenient collet lock button for quick and easy accessory changes
Click-and-set on/off switch allows precise speed selection
Replaceable motor brushes extend tool life.
6-foot cord
Comes complete with:
Rotary tool
Storage case
Micro case accessory organizer
One #106 engraving cutter
One #150 drill bit
One #191 high speed cutter
One #401 mandrel
One #402 mandrel
One #403 brush wheel
One #407 coarse 1/2-inch sanding drum
Three #408 coarse 1/2-inch sanding bands
Twelve #412 medium sanding discs
Five #414 small felt wheels
One #415 dressing stone
Four cutoff wheels
One #421 small polishing compound
One #422 felt buff cone
One #425 emery wheel
Two #426 1-1/4-inch fiberglass cutoff wheels
One #428 carbon steel brush
One #429 large felt wheel
One #430 coarse 1/4-inch sanding drum
Three #431 coarse 1/4" sanding bands
Three #432 fine 1/2" sanding bands
Three #438 fine 1/4" sanding bands
One #481 3/32-inch collet
One #511 medium buffing wheel
One #7134 diamond point cutter
One #83332 silicon oxide grinding stone
One #85422 silicon oxide grinding stone
One #932 aluminum oxide grinding stone
Product Specifications
Net Weight: 18 oz.
Pieces: 55 pcs.
Motor: 120V AC, 1.15 amp, 50-60 Hz
RPM: 5,000-35,000 variable
|
|
|
Dremel Stylus Cordless Rotary Tool Lot #956 (Sale Order 956 of 1039) The Dremel® Stylus is a unique tool for people who are passionate about hands-on projects. This ergonomic tool is perfect for applications around the home, such as finishing, intricate sanding, polishing, cleaning, engraving and more.
Ergonomic design fits comfortably in your hand
Cordless lithium-ion technology means Stylus is always ready to use
Patented nose tip control - on/off at front of tool for one-handed operation
Variable speeds from 5,000 to 25,000 rpm for superior performance and control
Pistol grip design for outstanding balance, performance and precision control
Docking station holds the Stylus during projects while charging the battery
Soft grip housing for superior comfort and control
7.2-volt integrated lithium-ion battery holds a charge six times longer than nickel cadmium; holds a charge for up to 2 years!
No battery "memory effects" -- can be recharged anytime without reducing the charge capacity
Kit contains:
Rotary tool w/docking station, case and micro accessory case
#191 high speed cutter
#194 high speed cutter
#106 engraving cutter
#7144 diamond wheel point
#84922 silicone carbide grinding stone
#403 bristle brush
Two #414 polishing felt wheels
Two #429 polishing felt wheels
#425 emery impregnated wheel
#421 polishing compound
#512 abrasive buff
#430 sanding band
Twp #438 sanding bands
Five #412 sanding discs
#401 mandrel
#402 mandrel
3/32-inch collet
Wrench
Product Specifications
RPM: 5,000 - 25,000 variable
Volts: 7.2
Warranty: 2 year
Net Weight: 1 lb.
|
|
|
FEIN MultiMaster Select Grinder Lot #957 (Sale Order 957 of 1039) Fein's FMM 250 Q Select set is a professional tool that gives professional results. It is suitable for the complete range of work for interior fittings and renovation.
The main feature of the Select is the tool-free QuickIN rapid clamping system. The tool is suitable for all applications and has a wide range of accessories. Other features of the Select are:
Ergonomic design and non-slip soft grip zone
Powerful 250-watt motor with electronic speed control
Chuck with form-fitting mount, providing high torque transfer
Integrated interface for adaptation of additional system accessories
The Select set consists of:
MultiMaster Select tool
One hook and loop sanding pad
Five each 80-, 120- and 180-grit sanding pads
One universal E cut saw blade (29 mm)
One rigid stopping knife
One high speed steel saw blade
One carbide-tipped segment saw blade
Note: Case shown in picture is a box.
|
|
|
FEIN MultiMaster Start Grinder Lot #958 (Sale Order 958 of 1039) The MultiMaster Start from Fein, a full-fledged tool for the beginner. Suitable for all applications, with the most important accessories for grinding, sawing and scraping. Has star mount. Also features:
Ergonomic design and low weight
Chuck with form-fitting mount provides high torque transfer
Powerful 250-watt motor with electronic speed control
Integrated interface for adaptation of additional system accessories
Package consists of:
MultiMaster tool
One hook and loop sanding pad
Five each of 80-, 120- and 180-grit sanding sheets
One universal E cut saw blade (29 mm)
One rigid stopping knife
One key and mounting bolts
Note: Case shown in picture is a box.
|
|
|
Flexible Shaft Grinder Set with Bit Set (WT Import) Lot #959 (Sale Order 959 of 1039) This production-proved tool features a 1/4-horsepower motor that can be conveniently hung by its bail or in a vise.
Features:
On/off foot switch
Sure-grip Jacobs plain bearing key-type chuck
Lined flexible shaft resists dust, abrasive particles, moisture, oil and grease
36-inch flexible shaft
Hand piece
Hanging bail
Includes 105 piece multi-purpose bit set for 1/8-inch shank rotary tool; use for cutting, carving, sanding, grinding, cleaning, polishing and sharpening
Product Specifications
Cord Length: 8 ft.
Motor: 1/4 hp, 115/220V AC/DC
RPM: 16,000
Chuck Size: 5/32" keyed
Length: 36" shaft
|
|
|
Flexible Shaft Grinder with Foot Switch Lot #960 (Sale Order 960 of 1039) This production-proved tool features a 1/4-horsepower motor that can be conveniently hung by its bail or in a vise.
Features:
On/off foot switch
Sure-grip Jacobs plain bearing key-type chuck
Lined flexible shaft resists dust, abrasive particles, moisture, oil and grease
36-inch flexible shaft
Hand piece
Hanging bail
Includes a variable speed foot switch, 0 to 16,000 rpm; and 105-piece mini-rotary bit set for tools that accept 1/8-inch shank accessories, ideal for cutting, carving, grinding, cleaning, polishing and sharpening
Product Specifications
RPM: 16,000
Motor: 1/4HP, 115/220V AC/DC
Chuck Size: 5/32"
|
|
|
Flexible Shaft Machine S-Series (Foredom) Lot #961 (Sale Order 961 of 1039) The powerful, all-purpose Foredom Mode S hang-up style flexible shaft machine features a heavy-duty motor and fully grounded wiring. The motor comes supplied with Foredom's standard 39-inch shaft and sheath.
Includes solid state EM-1 electronic manual control. The EM is constructed of heavy-duty plastic. The dial control allows precise speed settings, as well as good repeatability of previous settings.
Product Specifications
RPM: 0-18,000
Motor: 1/8 hp, 110-130V
|
|
|
General Applications Grinding Kit (Foredom) Lot #962 (Sale Order 962 of 1039) Foredom's tool kits contain everything you need to get to work. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
SR motor offers substantially more power than any of Foredom's older universal types. It operates in forward and reverse rotation for added versatility.
FCT foot operated speed control has solid state electronics and comes in a heavy-duty plastic housing with an extra wide design.
Model 30 general handpiece -- is Foredom's most popular and part of the company's interchangeable line. It features a three-jaw, geared chuck with capacity up to 5/32 inch. Accessory changes are easy with the supplied chuck key.
CK-0 chuck key in molded plastic handle for changing accessories
No. 20 accessory kit, a 35-piece assortment with 3/32- and 1/8-inch shank accessories. It includes steel cutters and burrs, mounted points, wire and bristle brushes, rubber bonded abrasives, felt bobs, sanding drums and lubricating grease.
Product Specifications
Warranty: 2 years on motor & control
Capacity: Chuck, 0-5/32"
Motor: 1/6 hp
RPM: 18,000 max.
|
|
|
Rechargeable Rotary Tool Kit (WT Import) Lot #963 (Sale Order 963 of 1039) Fully rechargeable. Includes rotary tool with adapter and 34-piece accessory kit.
Product Specifications
RPM: 10,000 no load
Motor: 3.6V DC
|
|
|
1/2" Electric Impact Wrench (Jepson) Lot #964 (Sale Order 964 of 1039) This heavy-duty, reversible impact wrench with pin-detent socket retainer is ideal for both industrial and automotive use.
Convenient rocker switch provides simple one-hand reversing operation
External self-disconnecting brushes make maintenance a breeze
All ball bearing construction assures years of trouble-free operation
Can run 3/8 by 8-inch lag bolts to hang big garage doors in half the time
Product Specifications
Torque: 240 ft./lbs.
RPM: 2,100
OAL: 10-1/2"
Net Weight: 6.9 lbs.
BPM: 2,700
Cord Length: 8.2 ft.
Motor: 115V, 7.5 amps
|
|
|
1/2" Electric Impact Wrench (Milwaukee) Lot #965 (Sale Order 965 of 1039) Special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time
AC/DC rocker switch for quick selection of forward and reverse
Powerful 7-amp motor drives a unique impact mechanism at 1,800 rpm (no load)
Pin detent system to securely retain sockets and adapters
Excellent power to weight ratio
Ergonomic handle with soft cushion grip
ISO certified
Product Specifications
Motor: 120V AC/DC, 7 amps
Net Weight: 6 lbs.
Length: 11-5/8"
RPM: 1,800 no load
Torque: 300 ft.-bs.
Drive: 1/2" square
|
|
|
1/2" Heavy-Duty Impact Wrench (DeWalt) Lot #966 (Sale Order 966 of 1039) Features 345 foot-pounds deliverable torque in forward and reverse
1/2-inch detent pin anvil
AC/DC forward/reverse rocking switch
Soft grip handle for superior ergonomics
Ball bearing construction for increased durability
Product Specifications
Net Weight: 7 lbs.
Length: 11.25"
Motor: 7.5 amp
BPM: 2,700
Max Torque: 345 ft.-lbs.
RPM: 2,100 no load
|
|
|
1/2" Heavy-Duty Variable Speed Cement Shear (DeWalt) Lot #967 (Sale Order 967 of 1039) Powerful all ball bearing motor for increased power and long life
Head swivels 360 degrees for added cutting convenience
Variable for increased user control
Reversible, replaceable dual cutting edge side blades for longer cutting life and increased productivity
Center blades also replaceable; increases blade life and productivity
Product Specifications
Net Weight: 4.5 lbs.
Length: 9.1"
Strokes: 0-2,500/min.
Motor: 6.5 amp, 800 W
|
|
|
10-Gauge Unishears (Bosch) Lot #968 (Sale Order 968 of 1039) Lightweight and well-balanced for excellent control
Low vibration for operator comfort
Visible blade allows precise pattern cutting
Two-handed control for heaving cutting jobs
Perfect for industrial maintenance departments and light structural fabrication shops
Large switch can be operated with either hand
ISO certified and OSHA compliant
Product Specifications
Curve Radius: 1" min.
Strokes: 1,770 no load
Motor: 115/120V AC, 8.6 amps
Length: 12"
Net Weight: 6 lbs.
Capacity: Mild steel, 10 ga., most aluminum, .157"; most stainless, 12 ga.
|
|
|
14-Gauge Nibbler (Bosch) Lot #969 (Sale Order 969 of 1039) Flat, corrugated, trapezoidal or full square stock all cut efficiently with simple cutter change
Small gear head allows cutting in confined areas
No adjustment required when switching material thickness
Worn cutters changed in minutes with adjustable wrench
Double insulated
UL listed
Complies with OSHA standards and ISO certified
Includes die, punch, side handle and hex key
Burr-free edges, no finishing
Full swivel die available for cutting in all directions
Product Specifications
Hole Size: 5/8"
Motor: 115/120V AC
Curve Radius: 1-3/16"
Cut: 1/8"
Strokes: 2,400 no load
Length: 10-1/4"
Amp Rating: 4.6
Capacity: Mild steel, 14 ga.; most aluminum, 0.1"; most stainless, 16 ga
|
|
|
14-Gauge Unishears (Bosch) Lot #970 (Sale Order 970 of 1039) Lightweight and well-balanced for excellent control
Low vibration for operator comfort
Visible blade allows precise pattern cutting
Planetary gear drive offers more power per pound
Upper blade is double edged; when first edge is worn, simply reverse blade
Mushroom top handle for extra control under heavy cutting mode; easily remove to cut in confined areas
Double insulated
UL listed
Complies with OSHA standards and ISO certified
Product Specifications
Motor: 4.6 amps, 120V AC
Net Weight: 6 lbs.
Capacity: Mild steel, 14 ga.; most aluminum, .105"; most stainless, 16 ga.
Length: 10-1/4"
Strokes: 2,400 no load
Curve Radius: 3/4" min.
|
|
|
16-Gauge Nibbler (Bosch) Lot #971 (Sale Order 971 of 1039) Flat, corrugated, trapezoidal or full square stock all cut efficiently with simple cutter change
Small gear head allows cutting in confined areas
No adjustment required when switching material thickness
Worn cutters changed in minutes with adjustable wrench
Double insulated
UL listed
Complies with OSHA standards and ISO certified
Cuts through corners and 16-gauge steel studs quickly
Ejects chips downward away from workpiece and operator
Lightweight and portable
Three-position cuts forward, left and right
Includes die, punch, side handle and hex key
Product Specifications
Max Cutting Capacity: 0.2"
Motor: 115/120V AC, 5 amps
Capacity: Mild steel, 16 ga.; most aluminum, 0.1"; some stainless, 18 ga.
Net Weight: 4.6 lbs.
Curve Radius: 2" min.
Hole Size: 1" inside
Strokes: 1,700 no load
OAL: 10-1/2"
|
|
|
18-Gauge Heavy-Duty Swivel Head Shear (DeWalt) Lot #972 (Sale Order 972 of 1039) Powerful all ball bearing motor for long life
Head swivels 360 degrees for cutting convenience
Cuts a 7/32-inch strip, which continuously curls out of cutting area for clear line of sight
Variable speed permits cutting of a wide variety of thickness
Replacement blades available
Product Specifications
Net Weight: 5 lbs.
Motor: 5 amp, 470W
Strokes: 0-2,500/min.
Capacity: 18 ga. mild steel; 20 ga. stainless
Length: 9.1"
Curve Radius: 5-1/2" and larger
|
|
|
18-Gauge Shear (Milwaukee) Lot #973 (Sale Order 973 of 1039) Design of the 360-degree swivel head has comfort in mind
Three-blade cutter design gives consistent cuts in a variety of materials; round, square, and irregular holes
Cuts up to 15 feet per minute
Good low-priced alternative to larger models available
Trigger switch with trigger lock
Head assembly designed for easy servicing
ISO certified
Product Specifications
Net Weight: 4 lbs.
RPM: 0-2,500 no load
Cord Length: 8 ft.
Capacity: 18-gauge steel; 20-gauge stainless
Length: 15"
Cut: 7" min. radius
Motor: 120V AC, 4 amps
|
|
|
10-1/4" Circular Saw (Milwaukee) Lot #974 (Sale Order 974 of 1039) Time tested Milwaukee reliability is designed into this powerful 10-1/4 inch heavy-duty circular saw. A rigid aircraft aluminum shoe offers additional strength, while hardened steel gears and ball and roller bearing offer extended life. This high-capacity circular saw conquers 4-by-4 landscaping timber with ease and cuts at 45 degrees to 2-3/4 inches. These angle adjustments are quickly and easily attained with simple shoe release levers/knobs.
Product Specifications
Warranty: 1 year limited
Spindle: 5/8"
RPM: 5,200 no load
Net Weight: 19.5 lbs.
Motor: 15 amps, 120V AC/DC
Length: 14-1/4"
Blade Dia: 10-1/4"
Capacity: 3-13/16" @ 90°, 2-3/4" @ 45°
|
|
|
7" Metal Cutting Circular Saw (Morse) Lot #975 (Sale Order 975 of 1039) By Morse -- the new Metal Devil Metal® cutting circular saw leads the industry with the finest metal cutting circular saw blades. The science of metal cutting is combined with the technology of machine manufacturing to maximize cutting efficiency. These devils can take the toughest demands you have to offer.
Metal Devil circular saws have a sturdy, heavy-duty feel as they cut through metal smoothly and with minimum effort. This saw was built to cut metal with a unique motor design that maintains torque and operates at the optimum RPM as the blade moves through steel, thin steel, aluminum and stainless steel.
Other features:
Sure grip handles help steady saw during cutting
Special motor maintains torque at optimum RPMs during cutting
Quick release chip collection collects virtually all chips
Upper chamber also minimizes sparks and deadens sound
Guide arrows and sight opening make it easier to position blade
Saw includes an external overload switch, chip collection chamber, retractable blade guard, durable carrying case, a quick-release metal chip collecting cover, length adjuster and side handle. Also comes with a 6-millimeter hex key, safety goggles, ear plugs and a 7-inch Morse Metal Devil steel cutting blade. ISO 9002, CSA safety certified.
Product Specifications
Net Weight: 14 lbs.
Motor: 120V, 60 Hz, 15 amps, 1,800W
Arbor: 20 mm
Speed(s): 3,500 rpm no load
Blade Size: 7"
Max Depth of Cut: Mild steel, 1/4"
Max Cutting Capacity: 2.36"
|
|
|
7-1/4" Circular Saw (Bosch) Lot #976 (Sale Order 976 of 1039) High strength composite footplate for unmatched durability and flatness
Powerful blower with bevel quadrant vents clear dust from workpiece
High strength, lightweight magnesium upper guard
Anti-snag lower guard
Adjustable bevel and depth levers for years of consistent locking
High contrast bevel and depth scales for greater accuracy
On-board tool wrench storage for fast and easy blade changes
Removable end cap for easy access to serviceable brushes
Textured soft grip
Heavy-duty 22-amp switch
Spindle lock
Includes one 24-tooth carbide blade and carrying bag
Product Specifications
Depth of Cut: 2-7/16 @ 90°, 1-5/8 @ 50°, 1-7/8 @ 45°
Arbor: 5/8"
Blade Dia: 7-1/4"
RPM: 5,600 no load
Motor: 15 amp, 120V
Bevel: 56° stops at 22.5°, 45°
Net Weight: 10.2 lbs.
Cord Length: 10 ft.
|
|
|
7-1/4" Circular Saw (Makita) Lot #977 (Sale Order 977 of 1039) Powerful 10.5-amp motor
Heavy gauge aluminum wraparound base with ruler markings
Only 84 decibels
Line on blade case indicates position
Includes thin kerf premium carbide tipped blade, wrench, rip fence and wrench holder
ISO certified
Product Specifications
RPM: 4,700 no load
Blade Dia: 7-1/4"
Capacity: 2-1/2" max. @ 90°; 1-5/8" max. @ 45°
Motor: 10.5 amps, 115V
Net Weight: 7.7 lbs.
OAL: 11-3/4"
Arbor: 5/8"
|
|
|
7-1/4" Circular Saw (Wen) Lot #978 (Sale Order 978 of 1039) Powerful motor provides enough torque to cut through the hardest woods. Locking lever on shoe plate makes depth of cut settings fast and easy. Arbor lock allows for fast blade changing. Includes a 7-1/4 inch, 34-tooth carbide saw blade, adjustable rip guide, hex key wrench, spanner wrench and spare carbon brushes.
Product Specifications
Warranty: 1 year limted
RPM: 4,500
Arbor: 5/8"
Depth: 2-9/16" @ 90° 1-13/16" @ 45° bevel
Blade Size: 7-1/4"
Net Weight: 11 lbs.
Motor: 2-1/3 hp, 22-112V, 10 amp, 60 Hz, AC only, single speed
|
|
|
7-1/4" Tilt-Lok Circular Saw (Milwaukee) Lot #979 (Sale Order 979 of 1039) Patented, adjustable main Tilt-Lok handle has eight locking positions; adjusts to cutting application for maximum comfort and control
Powerful saw cuts tough materials with ease, including headers, microlams and wet lumber
Maximum power-to-weight ratio
Light weight reduces operator fatigue, maximizing performance and control
Depth lever and bevel adjustments easy to access and operate
Patented front grip/rear handle
Convenient bevel scale faces operator for quick and accurate bevel adjustment
One-touch spindle lock uses a convenient button on top of the saw for easy access
Milwaukee® durability -- hardened steel helical gears, ball and roller bearings, impact-resistant glass reinforced nylon motor housing, aircraft aluminum shoe, durable, flexible rubber cord set.
22-amp high capacity switch
Includes carbide blade, hex blade wrench and impact-resistant carrying case
Product Specifications
Motor: 120V AC/DC, 15 amps
RPM: 5,800 no load
Blade Dia: 7-1/4"
Net Weight: 10.4 lbs.
Max Depth of Cut: 2-7/16" @ 90°; 1-11/16" @ 50°; 1-13/16" @ 45°
Cord Length: 9 ft. fixed
Spindle: 5/8"
|
|
|
7-1/4" Worm Drive Construction Saw (Bosch) Lot #980 (Sale Order 980 of 1039) Worm drive gear train with left side blade design
Powerful 15-amp all ball bearing motor
Built-in saw hook for easy storage between cuts
Anti-snag lower guard to minimize snagging in wood
Die-cast magnesium footplate for greater strength
50-degree bevel capacity with positive stop at 45 degrees
Magnesium housing
Easy serviceable brushes
Large adjustment levers
Spindle lock
Soft grip rear handle
Double insulated
UL listed and complies with OSHA standards
Includes 24-tooth carbide blade and blade wrench
Product Specifications
Motor: 15 amp, 120V
Depth of Cut: 2-3/8" @ 90°, 1-13/16" @ 50°, 1-15/16" @ 45°
Arbor: Diamond
Cord Length: 10 ft.
Net Weight: 14 lbs.
Blade Dia: 7-1/4"
RPM: 4,400 no load
|
|
|
8" Heavy-Duty Metal Cutting Saw (Milwaukee) Lot #981 (Sale Order 981 of 1039) Durable magnesium blade shield deflects hot metal chips and sparks
Integral chip tank efficiently collects waste for easy cleanup
One-pass cuttting through most metal studs, grating, panel and decking
Exclusive quick-release blade shield latch for convenient chip disposal and blade changes
Convenient guard retraction lever for plunge cuts
Dry cut technology provides faster, cleaner, more affordable metal cutting
Powerful motor optimized for metal cutting
Heavy duty 22-amp switch
Tactile-grip front and rear handles enhance comfort and control
Durable, rust-resistant, stainless steel shoe provides smooth, accurate cuts
Premium carbide-tipped metal cutting blade cuts faster, cleaner amd longer than other carbide-tipped or friction blades
Convenient cut depth adjustment lever
Onboard blade wrench storage
Includes 8-inch metal cutting circular saw, metal cutting blade (#48-40-4515), hex blade wrench and impact-resistant carrying case
Product Specifications
Arbor: 5/8"
Blade Size: 8" dia. x 3/32" thick
Net Weight: 13.3 lbs.
Depth: 2-9/16 @ 90°
Motor: 120V AC/DC, 13 amps
RPM: 3,700 no load
|
|
|
8-1/4" Circular Saw (Milwaukee) Lot #982 (Sale Order 982 of 1039) 8-1/4" Circular Saw (Milwaukee)
|
|
|
9" Metal Cutting Circular Saw (Morse) Lot #983 (Sale Order 983 of 1039) By Morse -- the new Metal Devil® metal cutting circular saw leads the industry with the finest metal cutting circular saw blades. The science of metal cutting is combined with the technology of machine manufacturing to maximize cutting efficiency. These devils can take the toughest demands you have to offer.
Metal Devil circular saws have a sturdy, heavy-duty feel as they cut through metal smoothly and with minimum effort. This saw was built to cut metal with a unique motor design that maintains torque and operates at the optimum RPM as the blade moves through steel, thin steel, aluminum and stainless steel.
Sure grip handles help steady saw during cutting
Special motor maintains torque at optimum RPMs during cutting
Quick release chip collection collects virtually all chips
Upper chamber also minimizes sparks and deadens sound
Guide arrows and sight opening make it easier to position blade
This 9-inch saw can cut beveled edges with Laser Line cutting guide
Saw comes with a side handle, laser guide, 0 to 45 degree beveling, a 30-minute duty cycle, overload switch, chip collection chamber, retractable blade guard, durable carrying case and length adjuster. Tool also includes a wrench, safety goggles, earplugs and a 9-inch Morse Metal Devil steel cutting blade (48T). ISO 9002 and CSA safety certified.
Product Specifications
RPM: 2,500 no load
Net Weight: 19-3/4 lbs.
Motor: 120V, 60 Hz, 15 amps, 1,800W
Arbor: 1"
Max Depth of Cut: Mild steel, 3/8"
Max Cutting Capacity: 3-1/4"
Blade Size: 9"
|
|
|
Evolution™ 7" & 9" Metal-Cutting Saws Lot #984 (Sale Order 984 of 1039) Sure grip handles help steady saw during cutting. Special motor maintains torque at optimum RPMs during cutting. Upper chamber collects virtually all chips. Upper chamber also minimizes sparks and deadens sound. Guide arrows and sight opening make it easier to position blade. 9" model can cut 0° to 45° beveled edges. Morse Metal Devil™ metal-cutting saw blades work well on standard circular saws, but reach their full potential when used on special metal-cutting circular saws. Evolution™ saws have a sturdy, heavy-duty feel as they cut through metal smoothly and with minimum effort. This saw was built to cut metal with a unique motor design that maintains torque and operates at the optimum RPM as the blade moves through steel, thin steel, aluminum and stainless steel. Comes complete with retracting blade guard, wrench for blade changes, cutting guide, 3-prong plug, chip retention chamber, 1 Metal Devil™ steel cutting blade, safety glasses and ear plugs. Model 230 includes additional storage case.
Product Specifications
Arbor: 25.4mm
Net Weight: 16 lbs.
Size: 9"
Cord Length: 8'
Blade Size: 9"
Max Depth of Cut: 3.25" max.
RPM: 2700
Motor: 3.25 HP, 15 amp, 1570 watts
|
|
|
10" Compound Miter Saw (Makita) Lot #985 (Sale Order 985 of 1039) Powerful 15-amp motor for improved performance
Pivoting fence for supporting larger stock
Dual post compound pivoting arm
Positive stops at nine settings -- 15, 22.5, 30 and 45 degrees; right or left; and 0 degrees (90-degree cuts)
Easy portability
Precision machined aluminum base ensures accurate cuts
Performs compound cutting operations
Shaft lock for easy blade changes
Comes with 10-inch, 40-tooth carbide tipped blade, socket wrench, dust bag and triangular rule
ISO certified
Product Specifications
Motor: 115V, 15 amps
Miter: 0-45° left; 0-52° right
Bevel: Up to 45° to left
RPM: 4,600 no load
Net Weight: 24.2 lbs.
Miter/Bevel: 1-3/8" x 3-5/8" @ 45° 2-3/4" x 5-1/8" @ 90 °
Length: 18-23/32"
Blade Dia: 10"
Arbor: 5/8"
|
|
|
10" Compound Miter Saw (Wilton) Lot #986 (Sale Order 986 of 1039) Powerful 15-amp ball bearing motor provides smooth, consistent cutting power
Positive bevel stops at 0 and 45 degrees for angled cuts
Miter stops at 0, 15, 22.5, 30, 31.6 and 45 degrees to handle the most popular cuts
Die-cast aluminum table and back fence
Durable base for improved stability and reduced vibration
Pre-drilled for bench mounting
Arbor lock for easy blade changing
Electric brake stops blade after cut is finished
Dust bag for capturing most sawdust
Lockoff switch with removable key
Product Specifications
RPM: 5,000 rpm
Crosscut: 90°, 2-3/4" x 5-1/2"
Miter Degree R & L: 45°, 2-3/4" x 3-1/2"
Miter/Bevel: 45°, 45°, 1-7/8" x 3-1/2"
Net Weight: 36 lbs.
Blade Size: 10" carbide tip
Motor: 120V, 150 amps
Miter/Bevel: 0°, 45°, 1-7/8" x 4-3/4"
|
|
|
10” Magnum Compound Miter Saw (Milwaukee) Lot #987 (Sale Order 987 of 1039) Unique override mechanism allows fine-tuned adjustments to pre-set miter angle for precision cutting
Preset positive stops are set at 0, 15, 22.5, 30 and 45 degrees both left and right
Bevel angles from 50 degrees left to 3 degrees right with non-slip locking system
Miter angles from 51 degrees left to 59 degrees right
Miter table rotates on roller bearings for smooth positive miter settings
Extra tall flip fence offers maximum material support throughout the cut whether miter or compound
Patented flip fence can be flipped without the use of tools to accommodate either miter or compound cuts
Exclusive automatic retracting transparent lower guard maximizes blade visibility by sliding smoothly and quickly out of the line of sight during operation
10-inch carbide tipped blade included
ISO certified
Product Specifications
Miter/Bevel: (0° miter/0° bevel) 4" x 4" max. W; 2" x 6" max. L
Volts: 120
Vertical Capacity: (Baseboard against fenc) 4-1/4"
Vertical Capacity: (Crown molding nested vert.) 5-1/2"
Horizontal Capacity: (Baseboard lying flat) 5-9/16"
Amp Rating: 15
Blade Size: 10"
Miter/Bevel: (45° miter/0° bevel) 2" x 4" max L
Miter/Bevel: (Max. 0° miter/45° bevel) 2" x 6" max. W
Net Weight: 37.5 lbs.
OAL: 24-1/2"
Speed(s): 4,800 rpm no load
Spindle: 5/8"
Miter/Bevel: (Max. 45° miter/45° bevel) 2" x 4" max. W
|
|
|
1-1/4" Stroke Variable Speed Reciprocating Saw (Makita) Lot #988 (Sale Order 988 of 1039) Long 1-1/4-inch stroke for faster cutting
Unique clutch assembly helps protect the gears, should the blade bind
Four-position orbital/straight cutting action
Variable speed dial for presetting maximum speed
Powerful 15-amp motor with electronic speed control maintains constant speed under load
Makita Anti-Vibration Technology™ provides up to three times less vibration and noise and more power than the competition
Air from the motor fan keeps dust from entering the tool
Tool-less blade change and shoe adjustment
Includes one each blade nos. 723054-A and 723066-A and metal tool case
Product Specifications
Length: 19-1/8"
Motor: 115V, 15 amps
Net Weight: 9.7 lbs.
Stroke Length: 1-1/4"
Strokes: 0-2,800
|
|
|
1-1/8" Reciprocating Saw (Bosch) Lot #989 (Sale Order 989 of 1039) 360-degree scroll collar allows user to get into hard-to-reach areas
Quick-change blade system easily changes blades with no additional tools
Hook provides convenient storage for the saw
Variable speed trigger allows you to easily control cutting rate
Blade holder allows for up or down cutting
Soft grip boot provides user sure underhand and overhand cutting
Pivoting shoe provides work surface stability
Soft grip provides ergonomic feel for end user comfort
Includes one all-purpose blade and carrying case
Product Specifications
Net Weight: 7.2 lbs.
Stroke Length: 1-1/8"
Strokes: 0-2,700 per min.
Motor: 9 amps, 120V
Length: 17"
|
|
|
1-1/8" Stroke Variable Speed Reciprocating Saw (Makita) Lot #990 (Sale Order 990 of 1039) Variable speed for increased cutting efficiency
Powerful 9-amp motor for continuous operation
Long 1-1/8-inch stroke for faster cutting
Internal dust blower system clears debris from the line of cut for better visibility and accuracy
Heavy-duty shoe features tool-less adjustment
All ball and needle bearings for longer tool life
Product Specifications
Net Weight: 7.1 lbs.
Length: 17-3/4"
Stroke Length: 1-1/8"
Strokes: 0-2,800
Motor: 120V, 9 amps
|
|
|
Heavy-Duty Reciprocating Saw Kit (DeWalt -- 12 Amp) Lot #991 (Sale Order 991 of 1039) 12-amp motor delivers increased power for heavy-duty applications
Keyless stainless steel blade clamp for quick, easy blade changes and increased reliability
Keyless adjustable shoe easily adjusts depth of cut and extends blade life
Variable speed trigger provides control and increased versatility
Comes complete with metal cutting blade and heavy-duty kit box
Product Specifications
Stroke Length: 1-1/8" 1-1/8"
Strokes: 0-2,700
Length: 18"
Motor: 120V, 12 amps, 50/60 Hz, 1,325W
Net Weight: 8.6 lbs.
|
|
|
Heavy-Duty Reciprocating Saw Kit (DeWalt -- 10 Amp) Lot #992 (Sale Order 992 of 1039) Four-position blade clamp allows for flush cutting and increased versatility
Powerful 10-amp motor designed for heavy-duty applications
Lever-action keyless blade clamp for quick and easy blade changing
Variable speed trigger provides improved control
Includes a metal cutting blade and heavy-duty kit box
Product Specifications
Stroke Length: 1-1/8"
Motor: 120V, 10 amps, 1,150W
Strokes: 0-2,800
Net Weight: 7.0 lbs.
Length: 17.5"
|
|
|
Heavy-Duty Sawzall Lot #993 (Sale Order 993 of 1039) Unique gear clutch absorbs high-impact forces caused by sudden blade lockups
Counterbalance mechanism
Heavy-duty double bearing wobble plate mechanism for extra
Orbital action selector allows user to set the degree of orbital versus straight reciprocating action
Trigger speed control
Dial selector switch matches the correct speed with application
Allows more efficient use of blade & depth-of-cut control
Pivot shoe for maximum support against work surface
Reversible blade mounting for flush cuts
All ball and roller bearings
Quick-Lok® cord
Comes standard with carrying case, 10-foot two-wire cord and Super Sawzall® assortment two-blade pack (#48-02-5057)
Product Specifications
Stroke Length: 1-1/4"
Strokes: 0-3,200 per min.
Net Weight: 8.9 lbs
Motor: 120V AC only, 11 amps
Length: 18-1/8"
|
|
|
Heavy-Duty Sawzall Reciprocating Saw (Milwaukee) Lot #994 (Sale Order 994 of 1039) Milwaukee's 11-amp Sawzall® reciprocating saw is the most durable on the market. At only 7 pounds, it also has the best power to weight ratio in its class.
The saw offers Quik-Lol™ blade clamp for fast, tool-less blade changes. The rubber boot provides superior gripping, and the adjustable shoe provides longer blade life and more cut control. The blades can even be clamped upside down for special cutting needs. Other features are double bearing wobble plate mechanism for less vibration and double insulation. Uses standard 1/2-inch shank Sawzall blades.
Saw comes with Super Sawzall two-blade pack assortment, carrying case and rubber cord.
Product Specifications
Net Weight: 7 lbs.
Length: 17-1/3"
Cord Length: 8 ft. fixed
Stroke Length: 3/4"
Strokes: 0-2,800
Motor: 120V AC only, 11 amps
|
|
|
Orbital Super Sawzall Kit (Milwaukee) Lot #995 (Sale Order 995 of 1039) High power 13-amp Milwaukee-built motor is the fastest loaded cutting speed in the industry
360-degree rotating handle locks at 45-degree increments and can continuously rotate without going back to starting position
Trigger can stay on while rotating
Optimal user comfort in various cutting applications
Life tested to 20,000 cycles (revolutions)
New Quick-Lok blade clamp is larger and heavy-duty, with new gripping ribs; fast and easy blade changes
1-1/4 blade stroke and orbital blade stroke for fastest cutting in thick materials
Orbital action selector allows the user to set the degree of orbital versus straight reciprocating action
Counterbalanced for reduced vibration and smoother operation
Unique gear protecting clutch absorbs high impact forces caused by sudden blade lockups; extends life of tool in extreme cutting applications
Heavy-duty double bearing wobble plate mechanism for extra long life
All ball and roller bearings
Dial speed selector switch matches correct speed with application for improved control
Cushion grip handle and rubber boot for comfortable superior gripping and operator comfort
Keyless adjustable shoe adjusts without use of tools
Pivot shoe for maximum support against work surface
Quick-Lok® cord with two-wire 16-gauge construction cord
Toolkit includes two Super Sawzall blades, cord and impact resistant carrying case
Product Specifications
Stroke Length: 1-1/4"
Cord Length: 10 ft.
Length: 19"
Strokes: 0-3,000 (no load)
Net Weight: 10 lbs.
Motor: 120V AC/DC, 13 amps
|
|
|
Reciprocating Saw (WT Import) Lot #996 (Sale Order 996 of 1039) Double insulated for operator safety. Blade travel is 1-3/16 inches.
Product Specifications
Net Weight: 7.5 lbs.
Strokes: 0-2,400 no load
Motor: 120 V AC, 60 Hz, 5.5 amps
Capacity: 4-1/2" (wood); 3/8" (metal)
Cord Length: 6-1/2 ft.
|
|
|
10 lb. ProPlus Line Fire Extinguisher Lot #997 (Sale Order 997 of 1039) Suitable for use on Class A (trash, wood and paper), Class B (liquids and gasses), and Class C (energized electrical equipment) fires
Home or business unit fitted with a pressure gage to provides at-a-glance status
Cylinder manufactured from impact-resistant steel
All metal valve assembly
Multipurpose dry chemical
UL listed and rated 4-A, 60-B:C
Monoammonium phosphate; suitable for use on most common fires
Product Specifications
Height: 21.18"
Range: 20 ft. max.
Discharge Time (seconds): 19-21
Operating Pressure: 195 PSI
Bracket Furnished: Wall hook
Diameter: 5.12"
Cylinder Material: Steel
UL Rating: 4-A:60-B:C
Capacity: 10 lbs.
Width: 8.22"
|
|
|
2.5 lb. Excel Fire Extinguisher Lot #998 (Sale Order 998 of 1039) Suitable for use on Class A (trash, wood and paper); Class B (liquids and gases); and Class C (energized electrical equipment) fires.
Pressure gage provides at-a-glance status
Manufactured from lightweight aluminum
Tough nylon valve assembly
Clear graphic instruction label shows steps required to operate extinguisher
Easy-to-pull safety pin
Rust and impact resistant nylon handle
12-year limited warranty
UL approved plastic strap retention bracket
U.S. Coast Guard approved when fitted with supplied mounting bracket
Powder coated cylinder for corrosion protection
Product Specifications
Discharge Time: 8-12 sec.
Cylinder Material: Aluminum
Operating Pressure: 100 PSI
UL Rating: 1-A:10-B:C
Diameter: 3.25"
Range: 10-15 ft.
Height: 15"
Capacity: 2.6 lbs.; unit weight, 3.9 lbs
Bracket Furnished: Nylon strap
|
|
|
20 lb. Pro Line Fire Extinguisher Lot #999 (Sale Order 999 of 1039) The Pro Line is Kidde's most popular line of commercial and industrial extinguishers. All Pro models feature metal handles and levers. Steel cylinder and Zytel nylon valve.
Tri-Class dry chemical (ABC). Ideal for Industrial applications, such as hospitals, universities, warehouse and plant locations. Commercial design meets industrial requirements. Seamless cylinder is superior to welded designs.
Product Specifications
Cylinder Material: Steel
Discharge Time (seconds): 20-24
Diameter: 7"
Width: 8.8"
Height: 22"
UL Rating: 10-A:80-B:C
Bracket Furnished: Wall hook
Range: 20 ft.
Capacity: 20 lbs.
Operating Pressure: 195 PSI
|
|
|
5 lb. Service Lite Fire Extinguisher Lot #1000 (Sale Order 1000 of 1039) Ideal for industrial or institutional settings, such as hospitals, universities, warehouses and plants
Design meets industrial requirements
Seamless lightweight aluminum cylinder superior to welded designs
Suitable for use on Class A (trash, wood and paper); Class B (liquids and gases) and Class C fires (energized electrical equipment)
Tough nylon valve assembly
Easy-to-read pressure gauge allows for immediate pressure status check
Easy pull safety pin
Rust and impact resistant nylon handle
12-year limited warranty
UL approved wall hanger
Powder coated cylinder for corrosion protection
Product Specifications
Cylinder Material: Aluminum
Bracket Furnished: Wall hanger
Discharge Time (seconds): 13-15
Range: 12-18 ft.
Height: 16" 16"
UL Rating: 3-A:40-B:C
Capacity: 5 lbs.
Operating Pressure: 195 PSI
Diameter: 4-1/2"
|
|
|
Automobile Fire Extinguisher Lot #1001 (Sale Order 1001 of 1039) Fire extinguisher designed especially for use in automobiles; fights grease, gas, oil and electrical fires. Sodium bicarbonate dry chemical; suitable for use on Class B (liquids and gases) and Class C (energized electrical equipment).
The auto extinguisher has a "one-touch" pressure check device to ensure reliable performance. It is manufactured from lightweight aluminum and has a tough nylon valve assembly. Protective extinguisher hood. Two-year limited warranty.
Mount this unit on the floor or in the trunk of your car. It has a bracket that can either be drilled and mounted with screws to a surface, or use the "no drill" hook and loop bracket. Attach the no drill bracket to the extinguisher and press the hook and loop material against the carpet. Use the supplied hook and loop adhesive strips for non-carpeted surfaces.
|
|
|
First Aid Kit -- 20 to 25 People Lot #1002 (Sale Order 1002 of 1039) Treats most minor emergencies. Plastic case and four pairs of latex gloves. Kit also includes:
25 Certi-Strip plastic bandages, 1 by 3 inches
Certi-Gauze Pads -- one 4 by 4 inches; four 3 by 3 inches
One roll Certi-Gauze, 1 inch wide by 6 yards
One each Certi-Strip bandages, fingertip and knuckle
One eye pad
One roll adhesive Certi-Tape, 1/2 inch wide by 5 yards long
Six packs Certi-Burn cream, 1 gram size
Two insect sting wipe-ups
10 antiseptic BZK towelettes
Two packages aspirin (two pills per pack)
One ammonia inhalant, 1 by 1 inch
Two Certi-Cool junior cold packs
One Certi-Ose eye wash, 20 milliliter size
Two pairs nitrile gloves, size medium/large
One plastic forceps
One trauma pad, 5 by 9 inches
One 40-inch triangular bandage with two safety pins
One first aid fact sheet
|
|
|
First Aid Kit -- 40 to 50 People Lot #1003 (Sale Order 1003 of 1039) Designed to support the larger jobsite or workplace. Contains CPR rescue breather. Packaged plastic case and also includes:
Certi-Strip plastic bandages, 100 size 1 by 3 inch, two extra large
Certi-Gauze Pads -- two 4 by 4 inches; four 3 by 3 inches
One roll Certi-Gauze, 1 inch wide by 6 yards
Two eye pads
10 alcohol wipe-ups
One roll adhesive Certi-Tape, 1/2 inch wide by 5 yards long
Six packs Certi-Burn cream, 1 gram size
Five packs first aid cream, 1 gram size
Three Certi-Sporyn antibiotic packs, 1 gram size
Three PVP iodine wipe-ups
Three insect sting wipe-ups
10 antiseptic BZK towelettes
Five packs aspirin (two pills per pack)
Two ammonia inhalants, 1 by 1 inch
One Certi-Cool junior cold pack
One 3-inch cotton swab
One Ace style elastic bandage, 2 inches wide
One Certi-Ose eye wash, 20 milliliter size
Two pairs nitrile gloves, size medium/large
One pair bandage scissors, 4 inches
One plastic forceps
One trauma pad, 5 by 9 inches
One 40-inch triangular bandage with two safety pins
|
|
|
First Aid Kit -- 8 to 10 People Lot #1004 (Sale Order 1004 of 1039) Kit meets ANSI standard Z308.1 2003. Contains the following:
Certi-Strip bandages -- 16 1 by 3 inch, one each knuckle and fingertip
Four Certi-Gauze pads, 3 by 3 inches
One roll adhesive Certi-Tape, 1/2 inch wide by 5 yards
Six 1-gram packs of Certi-Burn cream
One 1-gram pack of first id cream
10 antiseptic BZK towelettes
One cold pack, Certi-Cool junior
One plastic forceps
One Certi-Gauze roll, 1 inch wide by 6 yards
Two pairs nitrile gloves, size medium/large
One pair bandage scissors
One 5-by-9-inch trauma pad
One 40-inch triangular bandage with two safety pins
One first aid fact sheet
Product Specifications
Size: 20-25 person
|
|
|
11-Pocket Split Leather Carpenter Apron Lot #1005 (Sale Order 1005 of 1039) Eleven pockets for nails, tools and more, plus dual plated steel hammer loops. Outer pocket for tape measure and nails. Top quality split leather construction. Fits waist sizes 28 to 46 inches.
|
|
|
11-Pocket Top Grain Apron Lot #1006 (Sale Order 1006 of 1039) Eleven pockets for nails, tools and more, plus hammer loops. Rugged top grain leather construction with reinforced rivets. Dual plated steel. Fits waist sizes 32 to 48 inches.
|
|
|
16-Pocket Super Bib Apron Lot #1007 (Sale Order 1007 of 1039) With five pockets to hold larger tools and eight narrow pockets for marking devices and small tools, you'll have everything you need close to you. The bib also has a three-compartment chest pocket and a neck strap to help carry the load. Dual hammer loops and a quick-release buckle complete the look. Made from 100 percent cotton duck.
Product Specifications
Size: 23-3/4" x 23-3/4"
|
|
|
GateMouth Open Face Tool Bag Lot #1008 (Sale Order 1008 of 1039) Twenty-nine pockets and loops organize your hand tools. Large interior with removable partition interior for power tools, extension cords, etc. ID pocket, tape measure clip, electrical tape holder and tool clip. Waterproof bottom protects tools and wears like iron
|
|
|
Hammer Holder Lot #1009 (Sale Order 1009 of 1039) Swinging hardware keeps hammer vertical. Cradle loop design holds hammer in place. Rust resistant, plated steel loop. 2-3/4-inch belt slots.
|
|
|
Pro GateMouth Tool Bag Lot #1010 (Sale Order 1010 of 1039) Rugged Boss Tex ripstop nylon and reinforcement. Beefy shoulder strap for massive loads. Handy outside loop dispenses tape or keeps keys accessible. Outside web straps for access to a level or favorite long-handled tool. Rigid bottom protects tools.
Product Specifications
Size: 18" L x 10" W x 12" H
|
|
|
Benchtop Blaster Model E100 (Cyclone) Lot #1011 (Sale Order 1011 of 1039) Clean, finish, peen, deburr, frost or engrave with this blaster
Gun assembly is trigger operated
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Hot air circulation helps keep abrasives dry
Cabinet fronts are slanted for better view and reduced back fatigue
Dust collection system is not included
Product Specifications
Window: 20.25" x 16.25"
Volts: 110
Net Weight: 25 lbs.
Working Dim: 14" H x 22.5" W x 18" D
Dimensions: 21" H x 23.5" W x 18.5" D
|
|
|
Benchtop Blaster Model E500 (Cyclone) Lot #1012 (Sale Order 1012 of 1039) Clean, finish, peen, deburr, frost or engrave with this abrasive blaster. Dust collection system is not included.
Product Specifications
Dimensions: 30" W x 18" H (26" rear) x 20" D
Volts: 110
Material: Thick walled plastic
Net Weight: 38 lbs.
Working Dim: 28" W x 12" (16" rear) x 18" D
Gun Assembly: Trigger, 5 CFM @ 80-90 PSI
Window: 24" x 14"
|
|
|
Cyclone 4040 Full Top Blaster with Side Door Lot #1013 (Sale Order 1013 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Canister dust collectors eliminate bag collection mess and can be detached for other uses
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Gun assembly is foot operated
Dust collector is model DC1500
Product Specifications
Net Weight: 345 lbs.
Dimensions: 66" H x 43" W x 62" D
Power: 110V
CFM: 14 CFM @ 90-100 PSI
Window: 10-1/4" x 25-1/4"
Side Door: 18" x 28"
Working Dim: 30" H x 40" W x 40" D
Material: 16-gauge steel
|
|
|
Cyclone 4224 Full Top Blaster with Side Door Lot #1014 (Sale Order 1014 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Canister dust collectors eliminate bag collection mess and can be detached for other uses
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Includes trigger gun assembly and Model DC1500 dust collector
Product Specifications
Dimensions: 60" H x 45" W x 46"
CFM: 14 @ 90-100 PSI
Side Door: 18" x 12"
Window: 20-1/4" x 9-1/4"
Net Weight: 245 lbs.
Working Dim: 24" H x 42" W x 24"
Material: 18-gauge steel
Power: 110V
|
|
|
Cyclone 4286 Full Top Sandblaster Lot #1015 (Sale Order 1015 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Canister dust collectors eliminate bag collection mess and can be detached for other uses
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Gun assembly is foot operated
Includes Model DC1500 dust collector
Product Specifications
Dimensions: 58" H x 48.5" W x 26-1/2" D
Net Weight: 275 lbs.
Working Dim: 26" H x 48" W x 26" D
Power: 110V
Window: 25-1/2" x 10-3/8"
CFM: 14 @ 90-100 PSI
Material: 18-gauge steel
|
|
|
Cyclone Model 3824 Side Door Opening Blaster Lot #1016 (Sale Order 1016 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Canister dust collectors eliminate bag collection mess and can be detached for other uses
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Product Specifications
Working Dim: 24" H x 38" W x 24" D
Window: 20-1/4" x 9-1/4"
Dimensions: 58" H x 38.5" W x 24.5" D
Includes: Dust collection system Model DC1500
Side Door: 18" x 12"
Material: 18-gauge steel
Power: 110V
Gun Assembly: Foot operated, 14 CFM @ 90-100 PSI
Net Weight: 225 lbs.
|
|
|
Cyclone Model DP38 Lot #1017 (Sale Order 1017 of 1039) Clean, Finish, Peen, Debur, Frost or Engrave with this direct pressure blaster. Made of 18 gage steel. Made in USA.
Product Specifications
OAL: 58"H x 38.5"W x 24.5"D
Net Weight: 250 lbs.
Side Door: 18" x 12"
Includes: Dust collector model DC1500
Volts: 110V
Window: 10" x 25"
Working Dim: 24"H x 38"W x 24"D
|
|
|
Cyclone Model DP48 Light-Duty Direct Pressure Blaster Lot #1018 (Sale Order 1018 of 1039) Includes dust collector Model DC 1500. Clean, finish, peen, deburr, frost or engrave with this abrasive blaster.
Product Specifications
Net Weight: 300 lbs.
Dimensions: 58" H x 48.5" W x 26.5" D
Working Dim: 24" H x 48" W x 26" D
Window: 10" x 25"
Side Door: 18" x 12"
Material: 18-gauge steel
Volts: 110
|
|
|
Cyclone Model PK36 Side Door Opening Light-Duty Blaster Lot #1019 (Sale Order 1019 of 1039) Light-duty. Clean, finish, peen, deburr, frost or engrave with this direct pressure blaster. Includes trigger gun assembly. Dust collector not included. Some assembly required.
Product Specifications
Window: 23" x 13"
Net Weight: 75 lbs.
Working Dim: 24" H x 36" W x 24" D
Side Door: 18" x 12"
Dimensions: 58" H x 36.5" W x 24.5" D
CFM: 14 @ 90-100 PSI
Material: Polypropylene body; steel legs
Volts: 110
|
|
|
Cyclone Sandblaster Model 3624 with Side Door Lot #1020 (Sale Order 1020 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Canister dust collectors eliminate bag collection mess and can be detached for other uses
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Includes trigger gun assembly
Product Specifications
Working Dim: 24" H x 36" W x 24" D
Power: 110V
Window: 7" x 18"
Includes: Dust collector model DC1500
Dimensions: 59" H x 37" W x 25" D
Side Door: 18" x 12"
CFM: 14 @ 90-100 PSI
Material: 18-gauge steel
Net Weight: 175 lbs.
|
|
|
FT3522 Full Top Opening Blast Cabinet Lot #1021 (Sale Order 1021 of 1039) Dust collector is not included, but suggested
Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Includes trigger operated gun assembly and 18-inch unlined gloves
Product Specifications
Working Dim: 18" H x 34.5" W x 21.5" D
Dimensions: 53" H x 35" W x 22" D (closed), 40" D (open)
CFM: 14 @ 80-100 PSI
Window: 25" x 10"
Net Weight: 150 lbs.
|
|
|
Model 3024 Side Door Opening Blaster (Cyclone) Lot #1022 (Sale Order 1022 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Includes trigger gun assembly; dust collector system not included
Product Specifications
Net Weight: 130 lbs.
Material: 18-gauge steel
Volts: 110
Working Dim: 24" H x 30" W x 24" D
Gun Assembly: Trigger, 14 CFM @ 90-100 PSI
Window: 7" x 18"
Side Door: 18" x 12"
Dimensions: 59" H x 30.5" W x 24.5" D
|
|
|
Side Door Opening Blaster Model 6035 (Cyclone) Lot #1023 (Sale Order 1023 of 1039) Seams welded and sealed
Automatic air shutoff prevents blasting while door is open
Welded-in glove rings provide armrest
Shielded incandescent bulbs for better light
Canister dust collectors eliminate bag collection mess and can be detached for other uses
Hot air circulation helps keep abrasives dry
Cabinet fronts slanted for better view and reduced back fatigue
Product Specifications
Side Door: Two 28.5" x 22.5"
Volts: 110
Window: 45" x 12"
Working Dim: 27" H x 60" W x 35" D
Dimensions: 30" H x 60.5" W x 35-1/8" D
Includes: Dust collector model DC1500
Material: 18-gauge steel
Gun Assembly: Foot operated, 20 CFM @ 90-100 PSI
Net Weight: 300 lbs.
|
|
|
Table Top Sandblaster (WT Import) Lot #1024 (Sale Order 1024 of 1039) Includes gun with nozzle, rubber gloves and mylar sheets. Spare nozzle available.
Product Specifications
Air Inlet: 1/4" NPT
Working Dim: 29-1/2" x 19-1/2" x 14-1/2"
Pressure: 80 PSI
Net Weight: 50 lbs.
Power: 120V AC/12V DC
Capacity: 30 lbs. abrasive
Dimensions: 30" x 20" x 26-1/2"
|
|
|
10-Gallon, 2-Stage Industrial Stainless Steel Vacuum Lot #1025 (Sale Order 1025 of 1039) This contractor vacuum is for facilities requiring rugged duty equipment, but at a modest cost. Vac features a stainless steel body for increased durability, with the ability to handle mildly corrosive liquids and mixtures that might be harmful to standard steel tanks. Ideal for use at construction sites and in hotels, factories and institutions.
Accessories included are interlocking chrome extension wands; 14-inch master nozzle, squeegee insert and brush insert; and heavy-duty cart for easy mobility.
Product Specifications
Motor: 1.7 hp max., 120V, 60 Hz, 7.8 amps
Hose Size: 12 ft. x 1-2/2" crushproof
Capacity: 10 gal. dry; 9 gal. wet
CFM: 1.7 @ 2-1/2" orifice
Cord Length: 18 ft.
|
|
|
6 Gallon Wet/Dry Vacuum (Shop-Vac) Lot #1026 (Sale Order 1026 of 1039) Inlet takes 1.25-inch (standard) or 2.5-inch hose for maximum versatility
Den resistant, rustproof, impact-resistant plastic tank.
Automatic shutoff prevents wet pick-up overflow
Converts to a powerful blower
Includes foam and reusable cartridge filter, 7-foot by 1.25-inch hose, two 16-inch extension wands, 10-inch combination nozzle/squeegee, onboard accessory holder and casters
Product Specifications
Warranty: 2 year limited
Capacity: 6 gal. dry, 5 gal. wet
Motor: 3.0 HP peak
|
|
|
Industrial & Contractor QSP Series Vacuums Lot #1027 (Sale Order 1027 of 1039) QSP® motors (up to 50 percent quieter than standard Shop-Vac motors)
Cartridge filter and drywall collection bags
Onboard cord wrap
6-foot by 2.5-inch diameter heavy-duty hose
Two 2.5-inch extension wands
Crevice tool
14-inch nozzle with squeegee insert
18-foot cord
Onboard accessory storage
Easy reach switch
Top carrying handle
Convenient side carrying handle
Anti-tip design
Product Specifications
CFM: 175
Motor: 6 hp peak, 120V, 60 Hz, 10 amps
Capacity: 22 gallon
Type: Poly body
|
|
|
Welding & Cutting Kit (WT Import) Lot #1028 (Sale Order 1028 of 1039) Cuts up to 3 inches and welds up to 1/2 inch. Kit contains:
Torch handle
Cutting attachment
Single-stage oxygen regulator
Single-stage acetylene regulator
Two welding tips
Cutting tip
15-foot welding hose
Welding safety goggles
Tip cleaner
Igniter
Plastic fitted case
|
|
|
131 Arc Welder (Clarke) Lot #1029 (Sale Order 1029 of 1039) Use for small general lightweight welding repairs, where 230-volt power is not available.
Features:
100 percent duty cycle tapering to 15 percent, allowing longer welding
Variable amperage control for precise welding power regulation
120 volts, so no special hookups; unit operates from standard 110-volt, 20-amp power supply
Safety thermal cutout protects against overload
Tough, scratch resistant metal casing
Ten-year limited warranty on transformer and rectifier. Two-year limited warranty on the complete unit, except consumable/wearing parts.
Includes face mask, welding cable and wire brush/chipping hammer.
Product Specifications
Electrodes: 1/16"-3/32"
Open Circuit Voltage: 48
Volts/Phase: 110V, 1 ph.
Dimensions: 14" x 9" x 11"
Net Weight: 32 lbs.
Peak Amps: 40/100
|
|
|
FP120 Dual-Purpose MIG Welding System (FirePower) Lot #1030 (Sale Order 1030 of 1039) The FP120 welder offers maximum versatility. The unit features quick change internal polarity adjustment that makes changing from MIG (GMAW) to fluxcore (FCAW) welding quick and easy.
Features:
Uses standard 115-volt household current
Welds with or without shielding gas
Welds with solid or fluxcore wire -- 2- and 10-pound spool capacities
Four-position welding power control
Illuminated thermal overload indicator
Illuminated on/off switch
Thermoplastic heat protection
Infinite wire speed control
ISO certified
Welder includes Firepower argon regulator, 10-foot Tweco MIG gun, 6-foot ground cable and work clamp, 6-foot power cord with plug, welding nozzle and tip, spool of .030 MIG welding wire and instruction manual.
Product Specifications
Output Voltage: 18 DC
Max Output Amps: 110
Input Voltage: 115V, 60 Hz
Max Thickness Capacity: 1/4"
Rated Output Capacity: 88
Open Circuit Cycle: 30
Rated Duty Cycle: 20%
|
|
|
FP18 Plasma Arc Cutting System (FirePower) Lot #1031 (Sale Order 1031 of 1039) The FP18 portable plasma cutting system operates on standard 115-volt household current. The built-in compressor provides the user with maximum portability. The system features an arc/drag torch system, which allows you to cut rusted, painted or coated surfaces without the need for prior surface preparation.
This system is ideal for HVAC, auto body, metal roofing and metal building construction, as well as many other uses around the farm, ranch and light maintenance shop.
Other features:
Cuts mild steel, stainless steel, aluminum, copper or brass
Automatic torch restart system
Substantially reducues joint prep time; waring does not occur, and slag removal not required
Long consumble life and low cost per cut
One-year warranty
ISO certified
Unit includes 20-foot FirePower drag torch system, 6-foot power cord with plug, five cutting tips, three electrodes, one gas distributor and instruction manual.
Product Specifications
10 Gage Cutting Speed: 12 ipm
Rated Duty Cycle: 30%
20 Gage Cutting Speed: 60 ipm
Rated Output Amps: 12
Max Cutting Capacity: 1/8"
1/8" Cutting Speed: 9 ipm
18 Gage Cutting Speed: 60 ipm
Input Voltage: 20
Output Amps: 18
|
|
|
FP200 MIG Welding System (FirePower) Lot #1032 (Sale Order 1032 of 1039) This system has all the features designed and required by professional welders, including a seven-position welding output control; adjustable burn back and soft arc control; and infinite wire speed control.
The unit welds up to 1/2-inch mild steel and also provides excellent aluminum capabilities with the optional spool gun. The unit is ruggedly designed to withstand frequent use and heavy-duty applications and comes with a handle and wheels for easy movement throughout the shop.
Other features:
Built-in cylinder rack and running gear
Illuminated warning indicator
Spool capacities of 2-, 10- and 20 pound wires
Thermostatic overload protection
ISO certified
Comes complete with FirePower argon gun, 10-foot Tweco MIG gun, 10-foot ground cable and work clamp, 6-foot power cord (without plug), welding nozzle and tip, spool of .035 flux core welding wire and instruction manual.
Product Specifications
Rated Output Amps: 155
Open Circuit Voltage: 40
Input Voltage: 25
Output Amps: 210
Rated Duty Cycle: 80%
Max Thickness Capacity: 1/2"
|
|
|
King 30 Plasma Cutting System Lot #1033 (Sale Order 1033 of 1039) Cuts thin gauge metals fast and with little warpage
Great for cutting auto body panel or heating ducts
Cuts stainless, copper, aluminum, iron or brass clean with little dross; perfect for fabrication
Copper wound transformer -- fully laminated dipped insulation for 35 to 100 percent duty cycle
Solid state circuitry
Pilot arc ignition starts through paint or rust; just connect to clean dry compressed air and 208/230-volt input
Auto pilot arc ignition is standard
12-foot torch cable
10 year limited warranty on transformer and rectifier; two-year limited warranty on the complete unit, except consumable/wearing parts
Product Specifications
Weight Plasma/Cooling: 50 lbs.
Dimensions: 8.5" x 18" x 13"
Input Voltage: 220V, 1 ph.
Torch: NPT-3R, 70°
Cutting Capacity: 1/4"
Cutting Voltage: 70V DC
Current Input/Output: 35/30 amps
Open Circuit Voltage: 110V DC
Rated Duty Cycle: 35-100%
|
|
|
MIG 135F No Gas MIG Welder Lot #1034 (Sale Order 1034 of 1039) Accepts welding wire sizes 0.023 - 0.035 inch
Alternating current
Professional type torch with full on/off control
Reliable
Suit with flux welding wire
Metal roller wire feed with variable wire speed control
Fan cooled and thermal overload protection
Product Specifications
Motor: 110V, 60 Hz
Amp Rating: 120V (10% duty) max., 60A (30% duty) min.
Net Weight: 37 lbs.
|
|
|
Mig 100E MK2 Welder Lot #1035 (Sale Order 1035 of 1039) Welds from 24 gauge up to 1/4 inch with solid wire and DC reverse polarity.
Top quality Benzel torch.
Solid state contactor for fast triggering while stitch welding. No contact to wear out
Easy slide loading of 4- to 12-inch wire spools
100 percent duty on low heat, which tapers to 15 percent of maximum heat
No electricity on the wire until the trigger is pulled
Safety thermal cutout protects against overload
Six heat settings
120-volt input heavy-duty drive
Ten-year limited warranty on transformer and rectifier. Two-year limited warranty on the complete unit, except consumable/wearing parts. Parts and consumables available locally.
Includes professional regulator, solid wire, contact tips, gun, nozzle, ground clamp, face mask and instructional video. Not fan cooled.
Product Specifications
Peak Amps: 30/130
Wire Feed: 45 ft./min.
Net Weight: 53 lbs.
Dimensions: 17" x 10" x 15"
Spool Capacity: mini, 11 lbs.
Max Thickness Capacity: 3/16"
Size: .023/.030 wire
Open Circuit Voltage: 21-28
Volts/Phase: 110V, 1 ph
|
|
|
Mig/Fluxcore 130EN Turbo Welder Lot #1036 (Sale Order 1036 of 1039) Welds most light- and medium-gauge metals. Sixteen gauge up to 3/8 inch with fluxcore wire and DC straight polarity. Weld from 24 gauge up to 1/4 inch with MIG (gas conversion kit) and DC reverse polarity.
Top quality Benzel torch withstands heavy use
Solid state contactor for fast trigger while stitch welding; no contacts to wear out
Solid state heat control finds the right amount of heat needed to do the job
Easy side loading of 4- to 12-inch wire spools
100 percent duty cycle on low heat tapering to 15 percent of maximum heat
No electricity on the wire until the trigger is pulled
Safety thermal cutout protects against overload
External polarity reversing capabilities; straight polarity for fluxcore, reverse for other wires. Reverse the polarity, use the optional gas conversion kit and MIG weld with solid wires
Fan cooled; allows for longer welding at full output
120-volt input plugs into standard household outlet
Four heat settings
Ten-year limited warranty on transformer and rectifier. Two-year limited warranty on the complete unit, except consumable/wearing parts.
Welder includes fluxcore wire, contact tips, gun, nozzles, ground clamp, face mask and instructional video.
Product Specifications
Wire Feed: 48 ft./min.
Peak Amps: 30/130
Size: .023/.035 wire
Dimensions: 17" x 10" x 15"
Spool Capacity: mini, 11 lbs.
Max Thickness Capacity: 3/16"
Volts/Phase: 110V, 1 ph.
Open Circuit Voltage: 21-28
Net Weight: 53 lbs.
|
|
|
Model FP235 AC/DC MIG Welder Lot #1037 (Sale Order 1037 of 1039) This welder provides powerful 235-amp AC or 185-amp DC arc (SMAW) welding performance at an affordable price. DC output produces better visual welds with more control and less splatter. It is the preferred method for overhead out of position welding.
Model FP235 features infinite amperage adjustment, which provides precise welding control. This versatile unit is for both light and heavy-duty repairs.
Other features:
Uses standard 230-volt household current
Thermostastic heat protection
Portable wheel and handle kit
Professional dense style cable connections
Fan cooled transformer
Illuminated thermal overload indicator
Unit comes complete with 10-foot welding lead and electrode holder, 10-foot ground cable and work clamp, 6-foot power plug (without plug), wheel kit and handle and instruction manual.
Product Specifications
Rated Duty Cycle: AC: 20% DC: 20%
Open Circuit Voltage: AC: 72 DC: 63
Rated Output Amps: AC: 200 DC: 135
Max Thickness Capacity: AC:1/4" DC: 1/4"
Input Voltage: AC: 50 DC: 35
Max Output Amps: AC: 235 DC: 18
Output Amps: AC: 20 DC: 21.5
|
|
|
Portable Arc Welding System (FirePower) Lot #1038 (Sale Order 1038 of 1039) Enjoy the benefits of arc welding repairs at an affordable price. The FP100 operates on standard 115-volt, 60 Hz household current and is designed to be simple to operate.
The unit features AC welding output as well as infinite amperage control, making it easy for even novice welders to obtain professional results. Ideal for home, farm and light maintenance repairs.
Other features are the FirePower easy weld system, thermostatic heat protection and infinite wire speed control. ISO certified.
Includes with 6-foot welding lead and electrode holder, 6-foot ground cord and work clamp, 4-foot power cord with plug and instruction manual.
Product Specifications
Input Voltage: 115V, 60 Hz
Max Output Voltage: 85
Rated Duty Capacity: 15%
Max Thickness: 3/16"
Rated Duty Cycle: 65
Output Amps: 27
Open Circuit Amps: 37
|
|
|
Portable Wire Welding System (FirePower) Lot #1039 (Sale Order 1039 of 1039) The FirePower Model FP90 provides simple yet very effective welding. Even the novice can achieve professional results with this machine.
Because it requires no shielding gas, it is ideal to use when welding is taking place outside, where wind can affect results. With a standard 115-volt household current and 15 percent duty cycle, the unit is suitable for light-duty applications, such as home projects and maintenance repairs.
Other features:
DC welding output
Two-position welding amperage power output control
Infinite wire speed adjustment
Thermostatic heat protection
Welds with fluxcore wire
Easy grip handle
Lightweight construction
Comes with plug, welding nozzle and tip, spool of .035 fluxcore welding wire and instruction manual.
Product Specifications
Input Voltage: 20
Rated Duty Cycle: 15%
Max Thickness Capacity: 3/16"
Open Circuit Voltage: 25
Output Voltage: 17.5 DC
Max Output Amps: 88
Rated Output Amps: 80
|
|