|
|
REAL ESTATE 32.5 acres of land Lot #1 (Sale Order 1 of 180) 32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 sq.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammmer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects. NOTE: This is the only lot in the auction that is offered with a reserve. It is a very low reserve, so be sure to make arrangements to bid! SELLER WILL FURNISH CLEAR TITLE VIA WARRANTY DEED.
Sales Agreement - Blackstone.pdf |
|
|
Kenbridge Commercial Real Estate Lot #2 (Sale Order 2 of 180) 21.6 acres and improvements selling without reserve!
Main building is 17,300 square feet approximately Property also includes numerous smaller buildings including an office building Large industrial property selling absolute! Public is welcome to inspect the property during daylight hours. Please be cautious- anyone entering the property does so at their own risk and assumes all liability. Ten percent of purchase price down day of auction (nonrefundable). Balance due at closing in approximately 60 days. Ten percent buyer's premium will be added to the winning bid to determine purchase price. Seller will furnish clear title via warranty deed. Oak Valley C Kenbridge flier.pdf Environment Investigation Closure Kenbridge mill.pdf Environment Investigation Closure Kenbridge mill.pdf Oak Valley C Kenbridge flier.pdf Sales Agreement - Kenbridge.pdf |
|
|
Strapping tool Lot #5 (Sale Order 3 of 180) Fromm P331 strapping tool
|
|
|
strapping cart Lot #6 (Sale Order 4 of 180) strapping cart
|
|
|
Strapping cart and tools Lot #7 (Sale Order 5 of 180) Strapping cart and tools
|
|
|
Pallet Lot #8 (Sale Order 6 of 180) Pallet of 1" plastic strap
|
|
|
plastic strap Lot #9 (Sale Order 7 of 180) rolls of plastic strapping
|
|
|
Barrels of Lumber Marker Lot #10 (Sale Order 8 of 180) (4) 55 gallon barrels of lumber marker. Dark forest green (new) still wrapped in pallet
|
|
|
Pedestal fans Lot #11 (Sale Order 9 of 180) (3) Pedestal fans
|
|
|
Wall Mounted Fans Lot #12 (Sale Order 10 of 180) (50 Wall Mounted Fans
|
|
|
Factory Floats Lot #13 (Sale Order 11 of 180) (9) factory floats
|
|
|
Step Ladders Lot #14 (Sale Order 12 of 180) Step Ladders
|
|
|
Tool Station Lot #15 (Sale Order 13 of 180) Tool station mounted on steel frame, Miller Dial Arc 205 AC/DC welder, tool box with contents, and torch set.
|
|
|
Contents of room Lot #16 (Sale Order 14 of 180) Contents of room to include but not limited to drives, 2 steel work tables, bolt bin, shelves with parts as marked
|
|
|
Air Compressor Lot #17 (Sale Order 15 of 180) 10 HP Tank mount air compressor with controls as marked
|
|
|
Hand tools Lot #18 (Sale Order 16 of 180) Lot of hand tools
|
|
|
Misc. in room Lot #19 (Sale Order 17 of 180) Misc. in corner of room to include (7) 21" saw blades, control boxes, and mystery box
|
|
|
Saw Blades Lot #20 (Sale Order 18 of 180) Lot of misc. saw blades on wall in office
|
|
|
Contents of office Lot #21 (Sale Order 19 of 180) Contents of office: (4) microwaves, refrigerator, window AC, tables, and desk
|
|
|
Lugged Chain Lot #22 (Sale Order 20 of 180) 2 pallets of 81X lugged chain
|
|
|
Fan blade Lot #23 (Sale Order 21 of 180) 72" fan blade
|
|
|
Welder Lot #24 (Sale Order 22 of 180) Lincoln Ideal Arc 250 welder
|
|
|
Lockers and Contents Lot #25 (Sale Order 23 of 180) Lockers and contents
|
|
|
Drill Press Lot #26 (Sale Order 24 of 180) Akins Precision drill press
|
|
|
Stencil cutting machine Lot #27 (Sale Order 25 of 180) Diagraph stencil cutting machine
|
|
|
Dual Bench Grinder Lot #28 (Sale Order 26 of 180) Dual Bench Grinder
|
|
|
Contents of rooms not all ready sold Lot #29 (Sale Order 27 of 180) Contents of (3) rooms not already sold as marked
|
|
|
Stacking sticks Lot #80 (Sale Order 28 of 180) 100 bundles of 6' stacking sticks
|
|
|
Bunk Dividers Lot #81 (Sale Order 29 of 180) Several 4x4 bunk dividers
|
|
|
Lumber Lot #90 (Sale Order 30 of 180) Several bundles of lumber.
|
|
|
Lumber Breakdown System Lot #100 (Sale Order 31 of 180) Lumber Breakdown System, 6' 3 arm 25'x11' 3 strand package deck, H-78 chain, 16'x12' transfer deck with 81x lugged chain, 22'x12" stick removal belt conveyor, all drives. No motor controls. First lot of an entirety.
|
|
|
Stick Stacking System Lot #101 (Sale Order 32 of 180) Automatic stick stacking system with sling type bin. Controls attached.
|
|
|
Lumber Transfer Deck Lot #102 (Sale Order 33 of 180) 27'x12' 4 strand lumber transfer deck with Cleveland gear reduction drive
|
|
|
Lumber Transfer Deck Lot #103 (Sale Order 34 of 180) 5' x13' lumber transfer to feed trimmer with C55B rooftop chain and gear reduction
|
|
|
Multi Saw Trimmer Lot #104 (Sale Order 35 of 180) Newman KNO Wheel lift multi saw trimmer. They were using it as 14' trim saw with 1' saw but will pass 20' lumber includes controls attached and belt block conveyor under trimmer
|
|
|
Lumber Outfeed Conveyor Lot #105 (Sale Order 36 of 180) 6' Lumber outfeed conveyor with 81X chain, (7) 5'x6" even ender rolls and gear motor drive
|
|
|
Sorting Deck Lot #106 (Sale Order 37 of 180) 80'x10'6" Sorting deck; 4 strand. 1 strand C55D roof top chain, (3) strands C55 chain, gear reduction drive
|
|
|
Motor Control Panel Lot #107 (Sale Order 38 of 180) Motor control center with 150 amp switch, starters and controllers
|
|
|
Trim Saw Blades Lot #108 (Sale Order 39 of 180) (13) 24" Trim saw blades on wall
|
|
|
Tie Back Lot #109 (Sale Order 40 of 180) Items 100-108 tied together with 10% raise
|
|
|
Lumber Rack Lot #110 (Sale Order 41 of 180) 8'x9' Double Racking Lumber Rack
|
|
|
Lumber Cart Lot #110A (Sale Order 42 of 180) Lumber Cart
|
|
|
Lumber Rack Lot #110B (Sale Order 43 of 180) 8'x9' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110C (Sale Order 44 of 180) 8'x9' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110D (Sale Order 45 of 180) 8'x9' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110E (Sale Order 46 of 180) 8'x9' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110F (Sale Order 47 of 180) 8x12' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110G (Sale Order 48 of 180) 8x12' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110H (Sale Order 49 of 180) 8x12' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110I (Sale Order 50 of 180) 8x12' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110J (Sale Order 51 of 180) 8x12' Double Racking Lumber Rack
|
|
|
Lumber Rack Lot #110K (Sale Order 52 of 180) 8x12' Double Racking Lumber Rack
|
|
|
Lumber Cart Lot #110L (Sale Order 53 of 180) 4'x10' Lumber Cart
|
|
|
Lumber Cart Lot #110M (Sale Order 54 of 180) 4'x15' Lumber Cart
|
|
|
Lumber Cart Lot #110N (Sale Order 55 of 180) 4'x11' Lumber Cart
|
|
|
Lumber Cart Lot #110O (Sale Order 56 of 180) 4'x6' Lumber Cart
|
|
|
Lumber Cart Lot #110P (Sale Order 57 of 180) 4'x10' Lumber Cart
|
|
|
Steel rack Lot #110Q (Sale Order 58 of 180) 4'x12' Steel Rack
|
|
|
Lumber Cart Lot #110R (Sale Order 59 of 180) 4'x8' steel rack
|
|
|
Lumber Cart Lot #110S (Sale Order 60 of 180) 4'x6' Lumber Cart
|
|
|
Switch Lot #111 (Sale Order 61 of 180) 60 amp switch, 200 amp switch
|
|
|
Switch Lot #112 (Sale Order 62 of 180) GE 400 amp switch
|
|
|
motor controls Lot #113 (Sale Order 63 of 180) (4) GE motor controls
|
|
|
Control Panel Lot #114 (Sale Order 64 of 180) Control Panel with 200 amp, 100 amp switches, Allen Bradley Size 3 starters, Eaton motor control
|
|
|
Blower Lot #115 (Sale Order 65 of 180) New York Blower Company Size 224 LS shop#P02836 100 with 20 HP motor
|
|
|
Blower Stand Lot #116 (Sale Order 66 of 180) Blower stand
|
|
|
Straight Line Rip Saw Lot #116A (Sale Order 67 of 180) Diehl SL52 Straight line Rip Saw (sn: 73M-3262-2498)
|
|
|
Roll case Lot #116B (Sale Order 68 of 180) 8'x8" Infeed roll case
|
|
|
Steel table Lot #116C (Sale Order 69 of 180) 42"x20" steel table
|
|
|
outfeed Lot #116d (Sale Order 70 of 180) Indexing outfeed
|
|
|
Break Down System Lot #117 (Sale Order 71 of 180) 6' 4 Arm tilting break down system, 20'x12" wide package deck with 81X chain, Tulsa winch drive, 22'x12" stick removal belt conveyor with drive
|
|
|
Stick Stacking System Lot #118 (Sale Order 72 of 180) Automatic stick stacking system with sling type stacking
|
|
|
Transfer Deck Lot #119 (Sale Order 73 of 180) 14'x13' wide 5 strand transfer deck with 6' let down arms to planer. No drive, 55 chain
|
|
|
Double Surfacer Lot #120 (Sale Order 74 of 180) Newman S282-2 24" wide double surfacer (sn: 14937) 50 HP motor on bottom heard and 60 HP motor on top head, knives, cut quiet helical carbide cutter heads includes Newman control center, 20 HP Hydraulic pack and outfeed press rolls
|
|
|
Belt Conveyor Lot #121 (Sale Order 75 of 180) 13'x24" Infeed belt conveyor with drive
|
|
|
Blower Lot #122 (Sale Order 76 of 180) 32" Blower and approx 15 HP motor. No pipe
|
|
|
Blower Stand Lot #122A (Sale Order 77 of 180) Blower Stand
|
|
|
Air Compressor Lot #123 (Sale Order 78 of 180) Ingersol Rand Air Compressor Model SSR-EP15U (sn: J3395U91R) 15 HP
|
|
|
Reserve Air Tank Lot #124 (Sale Order 79 of 180) Reserve air tank
|
|
|
Label Printer Lot #125 (Sale Order 80 of 180) Zebra ZT410 Label Printer
|
|
|
Paint system and paint Lot #126 (Sale Order 81 of 180) ARO MP 4008 Air operated paint system and paint
|
|
|
Motor control center Lot #127 (Sale Order 82 of 180) Ge 100 amp motor control center
|
|
|
steel rack Lot #128 (Sale Order 83 of 180) 4'x8' steel rack
|
|
|
steel rack Lot #129 (Sale Order 84 of 180) steel roll around rack 40"x8'
|
|
|
steel rack Lot #129A (Sale Order 85 of 180) 4'x8' steel rack
|
|
|
Hog and Hopper Lot #130 (Sale Order 86 of 180) Williams 32"x34" Hog with 75 HP motor (sn: 14604) and a hopper. No motor controls
|
|
|
Belt Conveyor Lot #131 (Sale Order 87 of 180) 50'x24" Belt conveyor with motor and drive
|
|
|
Blower Lot #132 (Sale Order 88 of 180) Carolina size 50-6 (sn: 5093) blower with 50 HP motor No controls
|
|
|
Control Panel Lot #133 (Sale Order 89 of 180) Control Panel: 200 amp switch for Danfuss Compact Starter MCD202, 150 amp switch for Danfuss Compact starter MCD 202, VLT micro drive. No wire or conduit
|
|
|
Control Panel Lot #134 (Sale Order 90 of 180) Control Panel
|
|
|
Switch Lot #135 (Sale Order 91 of 180) GE 400 amp switch
|
|
|
Dust Pipe Lot #136 (Sale Order 92 of 180) Outfeed dust pipe from Blowers, Planer and Hog
|
|
|
Air Compressor Lot #137 (Sale Order 93 of 180) Sullair Air Compressor Model 16-506 (sn: 9109-FLF) 56, 148 hours.
|
|
|
Reserve Air Tank Lot #138 (Sale Order 94 of 180) Reserve air tank
|
|
|
Air Dryer Lot #139 (Sale Order 95 of 180) Air Dryer
|
|
|
Sticker Stacking System Lot #140 (Sale Order 96 of 180) Complete 6' blade sticker stacking system to include but not limited to 25'x10' 3 strand package deck, 814 chain falk gear motor drive. First lot of an entirety.
|
|
|
Waterfan Unscrambler Lot #141 (Sale Order 97 of 180) HE Wilson 6' 4 Chain Waterfall Unscrambler 814 chain and Scymco drive
|
|
|
Transfer Deck Lot #142 (Sale Order 98 of 180) 18'x 12'6" transfer deck with C55B roof top chain and drive
|
|
|
Sticker Stacking System Lot #143 (Sale Order 99 of 180) 6' 5 Arm Blade sticking stacker system, controls as marked, above ground elevator let down 17 rollcase with (7) 6"x6' live rolls. Includes gear motor drive operated.
|
|
|
Gravity Rollcase Lot #144 (Sale Order 100 of 180) 25' Gravity Rollcase (10) 6"x6' Rolls
|
|
|
Cat Walk and Stairs Lot #145 (Sale Order 101 of 180) Catwalk and stairs
|
|
|
Tie Back Lot #146 (Sale Order 102 of 180) Items 140-144 tied back together with a 10% raise
|
|
|
Air Compressor Lot #147 (Sale Order 103 of 180) 2018 Garden Denver 15 HP tank mount air compressor (sn: D180163)
|
|
|
Torpedo heater Lot #148 (Sale Order 104 of 180) Master Torpedo Heater
|
|
|
Fan Lot #149 (Sale Order 105 of 180) (4) fans mounted on wall
|
|
|
Motor Control Panel Lot #150 (Sale Order 106 of 180) Allen Bradley motor control panel
|
|
|
Size 3 Starter Lot #151 (Sale Order 107 of 180) Allen Bradley size 3 starter
|
|
|
Anchor seal and pump Lot #152 (Sale Order 108 of 180) Barrel of anchor seal and pump
|
|
|
Zebra Printer Lot #153 (Sale Order 109 of 180) Zebra 21410 printer
|
|
|
Closet and contents Lot #154 (Sale Order 110 of 180) closet and contents to include refrigerator
|
|
|
Lumber Dip Tank Lot #155 (Sale Order 111 of 180) 6x20' Lumber Dip Tank outside with dimensions of tank being 6'6" x 20'6". Hydraulic lift
|
|
|
Fuel tank Lot #155A (Sale Order 112 of 180) 4' diameter by 6' fuel tank
|
|
|
fuel pump Lot #155B (Sale Order 113 of 180) Electric fuel pump
|
|
|
steel stand Lot #155c (Sale Order 114 of 180) 7'x5' steel stand
|
|
|
steel rack Lot #155D (Sale Order 115 of 180) 7'x5' steel stand
|
|
|
Concrete containment bins Lot #155E (Sale Order 116 of 180) (2) 5'x8'6"x30" deep concrete containment bins
|
|
|
Control Panel Lot #155F (Sale Order 117 of 180) Control Panel
|
|
|
Clean out bucket Lot #156 (Sale Order 118 of 180) Clean out bucket
|
|
|
Clean up bin Lot #156A (Sale Order 119 of 180) 8'x8'x4' deep clean up bin
|
|
|
Stick racks Lot #157 (Sale Order 120 of 180) stick racks
|
|
|
Cyclone Lot #158 (Sale Order 121 of 180) 5' cyclone with star feeder and misc. pipe
|
|
|
Fuel tank and concrete containment bin Lot #159 (Sale Order 122 of 180) Fuel tank and concrete containment bin
|
|
|
Trash bin Lot #159A (Sale Order 123 of 180) Trash bin
|
|
|
Dust Silo Lot #160 (Sale Order 124 of 180) 18' diameter x 32' tall Dust Silo. Bolt together with unloader includes cyclone on top. No dust pipe. 1st lot of an entirety
|
|
|
Elevator Dust Loading System Lot #161 (Sale Order 125 of 180) Silver Sweet Elevator dust loading system. Model Queen (sn: 139377) with controls. Is approx. 50' tall.
|
|
|
Dust Loading System Lot #162 (Sale Order 126 of 180) Dust loading system with auger dust removal conveyor
|
|
|
Dust house with stand Lot #163 (Sale Order 127 of 180) 10' Diameter Carter Day dust house with stand and star feeder and auger to dust house
|
|
|
Bag house system and stand Lot #163A (Sale Order 128 of 180) Carter Bag house system with stand 10' diameter
|
|
|
Cyclone Lot #164 (Sale Order 129 of 180) Approx 10' Cyclone with stand and star feeder
|
|
|
Blower Lot #165 (Sale Order 130 of 180) Carolina Blower Model 45-6 (sn: 5274) with 20 hp motor. Transition pipe only.
|
|
|
Dust Pipe Lot #166 (Sale Order 131 of 180) All dust pipe connect to dust system in and outfeed
|
|
|
Belt Conveyor Lot #167 (Sale Order 132 of 180) 60'x16" belt conveyor with supports covered with drive
|
|
|
Entirety COMPLETE DUST SYSTEM Lot #168 (Sale Order 133 of 180) ITEMS 160 THRU 167 TIED TOGETHER WITH 10% RAISE
|
|
|
Molder Lot #170 (Sale Order 134 of 180) Weinig Unimat 17A molder, 5 spindles with electrical control panel
|
|
|
Profile grinder Lot #170A (Sale Order 135 of 180) Weinig Rondamat 931 profile grinder
|
|
|
Gang Rip Saw Lot #171 (Sale Order 136 of 180) Mereen Johnson 419-DCS (sn: MJ-3297) Gang Rip Saw;21" with 12' infeed table
|
|
|
Surfacer Lot #172 (Sale Order 137 of 180) Whitney model 97, 40" surfacer, top 50 hp, bottom 30 hp (sn: 16062) with infeed conveyor and steel landing table
|
|
|
Belt Conveyor Lot #173 (Sale Order 138 of 180) 13'x44" belt conveyor with drive
|
|
|
Planer Lot #174 (Sale Order 139 of 180) Oliver Strato-O-Planer Model 170 E (sn: (89442)
|
|
|
Double End Trimmer Lot #175 (Sale Order 140 of 180) Greenlee Double End Tennon Machine Model 542 shop# 613-28
|
|
|
Straight Line Rip Saw Lot #176 (Sale Order 141 of 180) Mattison 404 Straight line rip saw chain is not 95% maybe 20% sorry for the misinformation
|
|
|
Belt Sander Lot #177 (Sale Order 142 of 180) Timesaver speed belt sander, model 750-3, (sn: 4591) 48" wide belt
|
|
|
Belt Sander Lot #178 (Sale Order 143 of 180) Timesaver speed belt sander. Model: TB3252HDA. S/N 67810
|
|
|
Belt Sander Lot #179 (Sale Order 144 of 180) Timesaver speed belt sander. Model: TB3252HDA.
|
|
|
Pop-up saw Lot #180 (Sale Order 145 of 180) Whirlwind pop up saw with infeed and outfeed, model 212L
|
|
|
Pop-up saw Lot #181 (Sale Order 146 of 180) Grutter pop up saw, R.H. with infeed and outfeed
|
|
|
Pop-up saw Lot #182 (Sale Order 147 of 180) Whirlwind pop up saw with infeed and outfeed, model 212R
|
|
|
Pop-up saw Lot #183 (Sale Order 148 of 180) Irvington Moore pop up saw, L.H.
|
|
|
Porter shaper Lot #184 (Sale Order 149 of 180) Porter shaper
|
|
|
Belt sander Lot #185 (Sale Order 150 of 180) Wysong and Miles 80" x8" belt sander
|
|
|
Belt Conveyor Lot #186 (Sale Order 151 of 180) Hytrol 48"x12' belt conveyor. No Belt
|
|
|
Belt Conveyor Lot #186A (Sale Order 152 of 180) Hytrol 48"x12' belt conveyor No Belt
|
|
|
Belt Conveyor Lot #186B (Sale Order 153 of 180) Hytrol 48"x12' belt conveyor with belt
|
|
|
Belt Conveyor Lot #186C (Sale Order 154 of 180) Hytrol 48"x12' belt conveyor. No belt
|
|
|
Belt Conveyor Lot #186D (Sale Order 155 of 180) Hytrol 48"x12' belt conveyor has belt
|
|
|
Belt Conveyor Lot #186E (Sale Order 156 of 180) Hytrol 48"x12' belt conveyor has belt
|
|
|
Belt conveyor and drive Lot #187 (Sale Order 157 of 180) 16'x36" Belt conveyor with drive
|
|
|
Belt conveyor and drive Lot #188 (Sale Order 158 of 180) 18'x40" Belt conveyor with drive
|
|
|
Belt conveyor and drive Lot #189 (Sale Order 159 of 180) 20'x36" Belt conveyor with drive. No belt
|
|
|
Belt conveyor and drive Lot #190 (Sale Order 160 of 180) 20"x4' Belt conveyor with drive
|
|
|
Chop Saw System Lot #191 (Sale Order 161 of 180) Chop Saw System includes scanner, chop saws, conveyors, infeed and transfer units as marked
|
|
|
Misc. Belts Lot #192 (Sale Order 162 of 180) Lot of Misc. Belts from 12" to 48" as marked in back warehouse
|
|
|
Electrical Boxes Lot #193 (Sale Order 163 of 180) Misc. Electrical boxes in warehouse as marked
|
|
|
Reserve Air Tank Lot #194 (Sale Order 164 of 180) (2) Reservie Air Tanks
|
|
|
Link Chain Lot #194A (Sale Order 165 of 180) (5) pallets of link chain
|
|
|
Gear Motor Drive Lot #195 (Sale Order 166 of 180) 20 HP Gear Motor Drive
|
|
|
Motor Lot #196 (Sale Order 167 of 180) 40 HP motor
|
|
|
Motor Lot #197 (Sale Order 168 of 180) 60 HP motor
|
|
|
Motor Lot #198 (Sale Order 169 of 180) 15 HP motor
|
|
|
Motor Lot #199 (Sale Order 170 of 180) 125 HP motor
|
|
|
Motor Lot #200 (Sale Order 171 of 180) Meg 20 HP motor
|
|
|
Motor Lot #200A (Sale Order 172 of 180) 20 HP motor
|
|
|
Gear Motor Drive Lot #200B (Sale Order 173 of 180) Gear Motor Drive
|
|
|
Motor Lot #201 (Sale Order 174 of 180) 75 HP motor
|
|
|
Motor Lot #202 (Sale Order 175 of 180) 20 HP motor
|
|
|
Motor Lot #203 (Sale Order 176 of 180) 20 HP motor
|
|
|
Drive Lot #204 (Sale Order 177 of 180) Drive
|
|
|
Open Top Trailer Lot #300 (Sale Order 178 of 180) Johnson Trailer Company 1975 38' steel open top trailer. NO TITLE (sn: 22-75-25-434)
|
|
|
Skid Steer Quick attach forks Lot #302 (Sale Order 179 of 180) Skid Steer quick attach 4' forks
|
|
|
Shop built attachment Lot #303 (Sale Order 180 of 180) Shop built attachment
|
|