|
|
Manual Sealless Steel Strapping Tool Lot #10 (Sale Order 1 of 90) Model A333, works for 1/2", 5/8" or 3/4" banding
|
|
|
Ingersoll Rand R55-A125 Air Compressor Lot #208 (Sale Order 2 of 90) Model R55I-A125, serial # VK2554U14149, 328CFM, 75 HP, 3 phase
|
|
|
Vertical Air Tank Lot #209 (Sale Order 3 of 90) 30" x 90" high
|
|
|
HMC Rosserhead Debarker with Butt Reducer Lot #210 (Sale Order 4 of 90) Complete Retrofit restore to like new W/ debarking head & butt reducer head, 50 HP main drive motor, 7.5 HP hydraulic power pack, mounted motor controls w/ disconnect flat track, access stairs & platform around operator's cab, debarker waste conveyor This debarker is made to debark long length material
|
|
|
4 Strand Log Deck with Stop and Load Lot #211 (Sale Order 5 of 90) 12' x 40' x 9'6" high, H-124 chain, electric drive, Wire to starter missing
|
|
|
Fulghum Debarker Lot #212 (Sale Order 6 of 90) For parts or to rebuild, 24" bullwheels
|
|
|
3 Strand Log Deck with Stop and Load Lot #213 (Sale Order 7 of 90) 10' 8" x 22' x 8' high, electric drive has H-78 chain
|
|
|
Cox Brothers Carriage Lot #215 (Sale Order 8 of 90) Model ACA808STD42, 42", (3) head block, tong dog, right hand super duty unit, 17' long, (4) sets of 16" trucks w/ (2) 5/16 axles, 80' of 60# flat rails & 21' pantograph, sawyer's cab w/ Cox Brothers setworks 80? track (2011)
|
|
|
Genco AC/DC Carriage Drive Lot #215A (Sale Order 9 of 90) w/ generator & drum package, GE Model 246664, S/N 1793974, Delco DC motor 750 Amp, S/N G1488 w/ Amplidyne 150 RPM converter
|
|
|
Hydraulic Cable Tightner Lot #215b (Sale Order 10 of 90) Dual Wheel hydraulic cylinder with hydraulic power pack
|
|
|
Husk Frame W/ Off Bear Belt Lot #216 (Sale Order 11 of 90) 6' X 18" belt
|
|
|
200 HP Motor on Head Saw Lot #216A (Sale Order 12 of 90) |
|
|
Sering 42" bar type log turner Lot #217 (Sale Order 13 of 90) .
|
|
|
30 HP Hydraulic Pack Lot #218 (Sale Order 14 of 90) Services Seiring Log Turner
|
|
|
Entirety Lot 214-218 Lot #219 (Sale Order 15 of 90) .
|
|
|
2 section main out feed roll case Lot #220 (Sale Order 16 of 90) 40" x 52' x 39" high, 8 1/2" x 24" rolls, 18" roll spacing, 2 1/4" shaft, and 10 hp drive
|
|
|
Crosby Edger Lot #221 (Sale Order 17 of 90) Model 11603R, 4" x 32", 2 moveable blades, includes laser system, 50 HP electric motor
|
|
|
Tailing Belt Lot #222 (Sale Order 18 of 90) 4" x 27', electric drive
|
|
|
(4) Arm Timber Lift Transfer Section On Edger Infeed Lot #222A (Sale Order 19 of 90) .
|
|
|
Main Dust box chain conveyor from head saw Lot #223 (Sale Order 20 of 90) 12" chain x 78' long, trough is 20" wide with 7" sides, electric drive
|
|
|
4 Strand Transfer Deck Lot #224 (Sale Order 21 of 90) 13' L x 13'6" wide x 26" high, electric drive H-78 chain with welded lugs
|
|
|
Timber Holding Bin Lot #225 (Sale Order 22 of 90) 12'6" x 23', on incline, w/ 4 strand double row poly ply skate rolls Winston machinery
|
|
|
6 Strand Transfer Deck Lot #227 (Sale Order 23 of 90) 13'6" x 35' x 31" high, electric drive, H-130 rooftop chain Steel plate decking
|
|
|
Crosby 8 Blade Pop UpTrim Saw Lot #228 (Sale Order 24 of 90) 20" blades, 16' max length, missing some chains and blades
|
|
|
Box type belt conveyor Lot #229 (Sale Order 25 of 90) 24" x 40' with 8" sides, needs new belt, electric drive, 58" high
|
|
|
Drag Chain Box Conveyor Lot #230 (Sale Order 26 of 90) 24" x 75' with 8" sides, 64" high, has gear box but no motor 81X- drag chain apron plate section
|
|
|
3 Strand Green Chain Lot #231 (Sale Order 27 of 90) 10'6" x 80' x 36" high, electric drive, 81 X chain wood decking made in sections Access stairs at grading station
|
|
|
Roll Case Lot #232 (Sale Order 28 of 90) 40" x 78' x 41" high, 11" x 30" rolls, 2 1/4" shaft, 41" roll spacing, jump chain on both ends, electric drive, does not include steel structure to ground
|
|
|
Salem 2 Saw Edger Lot #233 (Sale Order 29 of 90) Salem 6" x 48", 2 moveable blades, has electric motor but wires are cut, includes 18" x 9' infeed and Laser cabinet lights sell separately electric drive on feed rolls
|
|
|
Forestline laser lights Lot #233A (Sale Order 30 of 90) (2) line lights
|
|
|
Tailing Belt Lot #234 (Sale Order 31 of 90) 6' x 30', no drive
|
|
|
Roll Case with Jump Chain Lot #235 (Sale Order 32 of 90) 40" x 19', 11" x 30" rolls, 2 1/4" shaft, 48" roll spacing, electric drive, air cylinder on jump chain
|
|
|
7 Strand Transfer Deck Lot #236 (Sale Order 33 of 90) 16' 6" x 22', includes 7' structure to ground, electric drive
|
|
|
7' Salem Vertical Resaw Lot #237 (Sale Order 34 of 90) Serial # 6623896, Weight strain, electric saw guide, 11" face, 1" meat, no drive, 1st lot of an entirety
|
|
|
Worldwide Electric Motor Lot #238 (Sale Order 35 of 90) 250 HP, 890 RPM, frame 5867T, wires are stripped, was used for lot 237
|
|
|
Outfeed Rollcase with Jump Chain Lot #239 (Sale Order 36 of 90) 5' x 18', 8" x 36" rolls, hydraulic drive
|
|
|
5 Strand Transfer going to 4 Strand 180 degree Radial Transfer Deck Lot #240 (Sale Order 37 of 90) 10' 6" wide, electric drive
|
|
|
3 Way Board Separator Lot #241 (Sale Order 38 of 90) 11' 10" x 12' with 36" steel legs, does not include structure to ground
|
|
|
Corley Line Bar and turner section Lot #242 (Sale Order 39 of 90) Order # 62022, serial # LB-018, 64" x 14' 6", 4 strand popup transfer, hydraulic drive, 38" high, with Lewis Flexworks controls, does not include structure to ground
|
|
|
Hydraulic Unit Lot #243 (Sale Order 40 of 90) Has 20 and 25 HP electric motors, wires are stripped between shutoffs and motors
|
|
|
Corley Operators Cab Lot #244 (Sale Order 41 of 90) 58" x 84" x 84" high
|
|
|
Entirety Lot 237-244 Lot #245 (Sale Order 42 of 90) With 10% raise
|
|
|
4 Strand Transfer Lot #246 (Sale Order 43 of 90) 11' x 26" x 44" high, air stop, does not include shaft where it connects to lot 247, does not include steel structure to ground
|
|
|
4 Strand Transfer Deck Lot #247 (Sale Order 44 of 90) 5' x 12' x 42" high, does not include structure to ground, H78B roof top chain
|
|
|
Roll Case Lot #248 (Sale Order 45 of 90) 44" x 80' x 38" high, 8" x 36" rolls, 36" roll spacing, 2 1/4" shaft, electric drive, does not include structure to ground
|
|
|
12" Bands for Resaw Lot #249 (Sale Order 46 of 90) Total of 3
|
|
|
Precision 58" 6 Knife Chipper Lot #250 (Sale Order 47 of 90) Chipper size 15-58, serial # C2517, no drive, large RH throat feed 1st lot of an entirety
|
|
|
Electric Motor Lot #251 (Sale Order 48 of 90) 200 HP, 1775 RPM, frame 445T
|
|
|
Precision Chip Screen and Cyclone Lot #252 (Sale Order 49 of 90) 7' x 7' screen, serial # S1644, electric drive, cyclone is in rough condition
|
|
|
Entirety Lot 250-252 Lot #253 (Sale Order 50 of 90) With 10% raise
|
|
|
Webster Vibrating Conveyor Lot #254 (Sale Order 51 of 90) 37" x 23' x 31" high, electric drive, wires are but by motor, infeed for chipper
|
|
|
Belt Conveyor Lot #255 (Sale Order 52 of 90) 12" x 31' x 7" sides, electric drive
|
|
|
Waste Conveyor Lot #256 (Sale Order 53 of 90) 14" x 27' x 6" sides, no drive
|
|
|
Belt Conveyor Lot #257 (Sale Order 54 of 90) 20" x 24"x 8" sides, electric drive
|
|
|
Belt Conveyor Lot #258 (Sale Order 55 of 90) 12" x 15' x 9" sides, no drive
|
|
|
ConcaveBelt Conveyor with Catwalk Lot #259 (Sale Order 56 of 90) 21" x 54', 24" catwalk, 11' legs at one end, 7.5 HP electric drive
|
|
|
Belt Conveyor Lot #260 (Sale Order 57 of 90) 18" x 80' long, 12" sides, 15" belt, 7.5 HP electric drive
|
|
|
Belt Conveyor Lot #261 (Sale Order 58 of 90) 12" x 17', 5" sides, 8 1/2" belt, 2 HP electric drive
|
|
|
Belt Conveyor Lot #262 (Sale Order 59 of 90) 14" x 57' long, 6" sides, 5 HP electric drive
|
|
|
Waste Conveyor Lot #263 (Sale Order 60 of 90) 10" x 30", 5" sides, 3 HP electric drive
|
|
|
Air Tank Lot #264 (Sale Order 61 of 90) 200 gallon
|
|
|
Electric Motor Lot #265 (Sale Order 62 of 90) 40 HP, 3 phase with electrical box
|
|
|
Steel Structure, Slide Pans, and All Cat Walk Lot #266 (Sale Order 63 of 90) Does not include any structure for building, includes all steel underneath the sawmill equipment
|
|
|
All electrical in building Lot #267 (Sale Order 64 of 90) Conduit, electrical boxes, etc. Most of the wire has been stripped from the conduit and boxes, does not include any shutoffs for a specific machine or any wiring that belongs to a machine
|
|
|
Winston Machine Tie/Timber Sorting System Lot #268 (Sale Order 65 of 90) 120' X 12" Rollcase w/ 4 kick off sections (2) existing double poly 3 strand roll off sections, additional sections to be determined.
|
|
|
Tyrone SMA 220 Pump Package Lot #270 (Sale Order 66 of 90) Pump package with 60 HP motor S/N A2313
|
|
|
Crosby Size 32 2 Saw Edger Lot #271 (Sale Order 67 of 90) Model 4451T (2) movable saw new feedrolls excellent arbor and bearings includes infeed table and electric motor
|
|
|
Corley Bar Type Log Turner Lot #272 (Sale Order 68 of 90) |
|
|
48" Precision DFBD Chipper Lot #273 (Sale Order 69 of 90) has a drop throat feed for rechipping or small material such as staves ect. Model 48:11 S/N C3308
|
|
|
Precision 66' 6 knife big throat chipper Lot #274 (Sale Order 70 of 90) (3) pockets used (3) bland HFBD converted to Bottom Discharge has top discharge chute still in tact. Top hood is there just not pictured yet.
|
|
|
Sering Bar Type Log Turner Lot #275 (Sale Order 71 of 90) Huge Bar turner no hydraulics
|
|
|
Tyrone Berry SMA 280C Shot Gun Feed Lot #276 (Sale Order 72 of 90) Hydraulic Shot gun with cylinders S/N A2737 150 HP Motor
|
|
|
Tyron Hydraulics 280 C Shot Gun Carriage Drive Lot #276A (Sale Order 73 of 90) Cylinders are marked 276A Three of them
|
|
|
Precision 8 X 8 Chip Sizing Screen Lot #277 (Sale Order 74 of 90) No Tag. Just taken out of service this week within 2 weeks to 4 months there has been both main bearings and hanger arm replacements and replaced screens. Includes Cyclone Collector
|
|
|
Precision 84" HFSD Chipper Lot #278 (Sale Order 75 of 90) Lefy hand feed
|
|
|
Hurdle 2 HB Portable Sawmill Lot #279 (Sale Order 76 of 90) Axel still in place with cam setworks. Log Turner Little ware on this unit Includes Motor mount and 150 HP electric motor all modular
|
|
|
Carter 4 head resew Lot #283 (Sale Order 77 of 90) 15 hp heads, Carter Saw guides great for stringers. Made by the Carter that makes saw guides
|
|
|
Pendu 3200S Vertical Cant Sizer Lot #284 (Sale Order 78 of 90) 12" machine with carbide cutter head vertical incline sizing made easy comes with mounted motor control 30 HP motor S/N 9805
|
|
|
35' Log Trough Conveyor Lot #285 (Sale Order 79 of 90) with 2 strands of H101 type log chain HD No Drive
|
|
|
30' Log Trough Conveor Lot #286 (Sale Order 80 of 90) |
|
|
10 HP Hydraulic Power Pack Lot #286A (Sale Order 81 of 90) |
|
|
Meadows 3 Saw Edger with indeed and outfield Lot #290 (Sale Order 82 of 90) Includes two movable saws Nice 3 saw edger
|
|
|
Square D Main Distribution Lot #291 (Sale Order 83 of 90) 3000 AMP
|
|
|
Barko 160 Knuckleboom loader Lot #298 (Sale Order 84 of 90) Mounted on Pitts Trailer and has dual hydraulics
SN 20091 |
|
|
Caterpillar 928G Rubber Tired Wheel Loader Lot #299 (Sale Order 85 of 90) Forks with bale sale separately Hours will be posted when available S/N 6XR01281.
|
|
|
Tandem Dual Axle Goosneck Trailer Lot #300 (Sale Order 86 of 90) Will measure on site. probably 30'
|
|
|
John Deere 444B Wheel Loader Lot #302 (Sale Order 87 of 90) Nice machine looks good and decent tires Bucket
and Forks Sell Seperately |
|
|
John Deere 444 Lumber Forks Lot #303 (Sale Order 88 of 90) Forks Only
|
|
|
John Deere 444B Bucket Lot #304 (Sale Order 89 of 90) .
|
|
|
3 Strand Log Deck with Stop and Load Lot #214 (Sale Order 90 of 90) 10'6" x 21' x 54" high, includes 50" nose skid section to carriage, H-78 chain, 4 arm stop and load 10 HP Motor and reduction drive 1st lot of an entirety
|
|