Donley Auction Services Inc. Auction Catalog - Day 2 - Annual Fall Classic Online Auctions

Midway's Sea Wolf Arcade Game

Lot #2001 (Sale Order 1 of 306)

Midway's Sea Wolf submarine arcade game. The Sea Wolf was one of the more popular arcade games, first released in 1976 with over 10,000 units being sold and the popularity continuing into the 1980's. The purpose was to use the periscope to find surface targets to fire torpedoes at. Case comes with a small pull out step stool for easier use by younger kids. Machine case is in excellent condition with very minor wear to the coloring and decals. Comes with 3 keys. Game is in working, playable condition. Measures 75"T x 32"D x 26.5"W. See photos.

Vintage Sky Fighter Gun Mutoscope Machine

Lot #2002 (Sale Order 2 of 306)

A 1940's era game where the player would shoot down planes with a movable scope. This coin op gaming machine took a nickel to play for 3 minutes. Comes with the door key. Machine has a great restoration with bright blue and red colorings and new plug. ENTER WORKING CONDITION HERE Perfect for any gaming or coin op collector. Measures 96"T x 36"L x 24"W.

Keeney Air Raider Machine Gun

Lot #2002a (Sale Order 3 of 306)

In 1939 the KEENEY Co. in Chicago copied an existing Anti-Aircraft Machine Gun created the Air Raider coin op game for arcades. The object was to shoot at attacking airplanes diving out of the sky, and the player tried to hit the bull's eye, to see them explode and tumble down, scoring points . Air Raider was a big success during WW II and was on routes for almost 20 years. For the 75th anniversary the company produced a handful of those impressive machine guns in every detail, all polished aluminum. This piece is mounted an a stand. The length on this piece is 35" over all and the grips 9" apart, the rear site at 15" high. It can be articulated higher or lower on the rounded base.

Coin Op Stem Shovel Arcade Machine w/ Base

Lot #2003 (Sale Order 4 of 306)

A 2 player coin op game made by Mechanical World, Arlington Texas. Each player would put in a quarter and turn their handles to move the crane arms and pick up prizes. This machine was made in the 1980s and has a State of Texas Amusement Machine Commission sticker in the lower left corner of the glass. Simple instructions are on the buildings. Just turn the handle to the position you want it at, drop in a quarter and turn the wheel again. Right handle turns and moves the arrow to the right and center position. Left side does not move the arrow as it appears to have been disconnected inside the machine. Machine will require some adjustments to get it fully operational again. One Steam Shovel plaque at the top appears to be a newer/restored plaque. Overall good condition. See photos. Measures 43”W x 24”D x 32”T. Comes with a stand that is 43”W x 24”D x 29”T.

Vintage Stand Up Iron Claw Machine

Lot #2003a (Sale Order 5 of 306)

A nice iron claw coin op game manufactured by C. Fleischer of Brooklyn New York. These coin op machines were popular in the early 20th century and played by turning a handle to grab prizes with the "digger". Resembles the larger construction crane. This machine has no cracks or chips in the glass. The 2 side doors open up for access to the prize pool. Included are 2 keys and a large assortment of various plastic toys. Electric cable is in good condition and appears to have been updated at some point to the 3 prong plug. Crane moves well when the wheel is spun. Untested but overall good condition. See photos. Measures 68"T x 18"D x 22"W.

National One Cent Scale

Lot #2004 (Sale Order 6 of 306)

A large National coin operated scale taking pennies. Made by the Weighing and Sales Company of Greater N.Y.. Scale weighs up to 300 pounds with chart on weight indicator for men, women, and children. Central column of scale is decorated with intricate designs. Foot plate is worn but wording on plate is still clear and legible. Scale works as intended and is stenciled "10411" on interior. Some minor wear to paint on exterior, overall very good condition. Comes with key. Measures 69"T x 30"D x 17"W. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORTER OR LOCAL PICKUP.

1¢ Coin Op Grip Strength Test Machine

Lot #2004a (Sale Order 7 of 306)

A well worn coin operated grip strength test machine. Decals on exterior are heavily worn and faded with the scale decal on the top faded into illegibility. Scale under glass panel is clear and legible and one side decal and 2 lower front decals are legible. Other side decal is missing a large fragment. Case has some signs of rust and grip handles for test are speckled with rust. Back panel held on by tape with instructions on inside of back panel. Instructions are soiled but legible under light. Machine works as intended. No key present. Measures 14.5"T x 8.5"W x 13.75"D. See photos.

Chicago Express Coin Op Pinball Game

Lot #2005 (Sale Order 8 of 306)

Train theme electro mechanical wood rail pinball made by Daval Mfg. of Chicago, IL circa 1935. Ten balls for 5 cents. In overall excellent original condition. A very scarce pinball from a company that was only in business for a few years and are better known for their counter top trade stimulators. You will not find a nicer all original example than this. Comes with original keys. Measures 41.5" long, 21" wide, 42" tall on wood legs

Vintage Marshal US 5 Cent Coin Op Arcade Game

Lot #2005a (Sale Order 9 of 306)

U.S. Marshal 5 Cent coin operated shooting arcade game produced by J.F. Frantz Mfg. Co in Chicago circa 1960's. Wood cabinet stands on 4 metal legs and has a plexiglass top for viewing targets. Wooden case has sea green paint with white detailing. Game works upon inserting a nickel and gun fires steel balls as intended but needs servicing. Replaced cash box door. Damage to top right of the back of the cabinet. Overall fair to good functional condition. Comes with 2 keys. Measures 53"T x 15"W x 33"D. See photos.

Bally Centaur Pinball Machine

Lot #2006 (Sale Order 10 of 306)

Produced by Bally Mfg. of Chicago, IL circa 1981. Artwork by Paul Faris. A very sought after 4 player machine which has spent most of its life in a home so it is not beat up at all. Cabinet is in VG condition. Playfield and back glass in VG condition. Coin mech intact but is currently on tokens. Plays well. Keys included. Measures 52" long, 67.5" tall, 30.25" wide.

Olympic Hockey Pinball

Lot #2007 (Sale Order 11 of 306)

A nice Olympic Hockey pinball machine made by Williams Electronics Inc of Chicago, IL in 1971. Overall very good original condition. 2 player game, Coin mechs intact, good playfield, cabinet shows light wear, back glass has flaking in the red paint areas. Scores and plays well. 110v. Measures 51" long, 71" tall, 30" wide on steel legs.

Williams Space Odyssey Pinball Machine

Lot #2008 (Sale Order 12 of 306)

A two player machine made by Williams Electronics of Chicago, IL circa 1976. The back-glass for Space Odyssey was very clearly an adaptation of Robert McCall’s poster art for Stanley Kubrick’s film, 2001: A Space Odyssey, and speculation that a lawsuit was forthcoming prematurely halted production of these machines. In overall very good original condition with coin mechs intact, good back glass with no flaking, playfield has some wear. Plays well. Includes keys. Measures 52" long, 22" wide, 72" tall on steel legs.

Pace Saratoga Slot Machine

Lot #2009 (Sale Order 13 of 306)

A rare machine indeed. Produced by Pace Mfg. Co in 1941, the Saratoga was a console machine with a mechanical slot mechanism and electro payout. It has a unique feature of a pinball "Skill" option that provided free plays. The wood cabinet is in very good original condition. The art glass top has a few flakes in the paint and silver but does not detract from the machine. It accepts and plays nickels but the electrical part has not been tested. You won't find a nicer one to restore. Measures 44" tall, 32" wide, 24" deep

Small Coin Op Baseball Game

Lot #2011 (Sale Order 14 of 306)

A baseball coin operated machine made by the Pace Manufacturing Company of Chicago, IL. Machine is in overall very good condition with lever for launching balls working as intended. Machine exterior is in very good condition with some minor wear to cherry stained wood top and bottom and some minor wear to metal finish. One patch of yellow on front in top right corner has paint chipped off. Polished steel playing field is in great shape. Top steel marquis retains 95+% of red and yellow paint. Coin operation mechanism seems disconnected, can freely launch balls with all returning to the shooting trough. Comes with key. Measures 16.75"T x 9.25"W x 7.375"D.

Bally 5 cent Coin Op Horse Race Trade Simulator

Lot #2012 (Sale Order 15 of 306)

Vintage 5 Cent Trade Stimulator, skill game manufactured by "The Bally Company". Game is called "Sparkplug" and is not only a luck, but somewhat a skill game looks to be in very good original working condition. No cracks in glass, artwork, and instruction panel in good condition, overall very good condition and has keys. 15" high x 13.5" wide x 11.5" deep. See photos.

Coin Op Four Jacks Skill Game

Lot #2013 (Sale Order 16 of 306)

Looks to be an older restoration, inside mech parts look to be old, but please view pictures and judge yourself. Works well, back doors look to be replaced, overall in very good condition. Wood base has crack by screw hole. Key included. 18.5" high x 14.5" wide x 10" deep. See photos.

1930s Coin op Kicker & Catcher Football Skill Game

Lot #2014 (Sale Order 17 of 306)

One cent Football Skill Game, Trade Stimulator, manufactured in the 1930s by "The Baker Novelty Company". Looks to be in very good original working condition. Wood back door. Coin mech works well, along with both controls, overall very good condition. 17.5" high x 13.75" wide x 11" deep. Please see photos.

Coin Op Stimulator Gumball Vendor "Beat it"

Lot #2015 (Sale Order 18 of 306)

A rare and unique counter top stimulator, coin operated, wood case, gumball shoot and locking wood door. Visible through top glass is a spinning roulette style wheel with ball and three dice. A do not tilt mechanism , sight area to view gum. A unique and unusual trade stimulator. Overall good condition and working. 6" high x 10" wide x 14.5" deep. See photos.

Coin Op Gold Miner Fortune Teller

Lot #2016 (Sale Order 19 of 306)

Coin operated "Pappy" fortune teller made by Characters Unlimited of Boulder City, Nevada. This is the deluxe model with enhanced head, eye, and hand movement, a dollar bill acceptor, and fortune dispenser. Old miner character tells one of 10 stories by way of a digital player. At the end of the audio, a fortune is dispensed. In overall excellent condition and works well, but the dollar bill acceptor needs a good cleaning. Comes with operation and service manuals and several hundred fortunes. Additional fortunes available through Characters Unlimited. Mounted on wheels, comes with Ace keys. These machines sell for $8,000 new and are proven money makers at locations around the world. Operates on 110v AC. Measures 79" tall, 29" wide, 25" deep

Caille Cail-O-Scope Coin Op Viewing Machine

Lot #2017 (Sale Order 20 of 306)

Made by the Caille Brothers of Detroit Michigan circa 1904. Drop a coin in the slot and see 15 different stereo views. Machine has an older restoration. Cabinet has been refinished, nickel parts re plated, and the original mech cleaned. A large spring motor is wound up with an external crank which will provide approx. 100 plays. The crank is not original to the machine. The card program is Jack Perrin & His Trained Horse Starlight. The marquee card is bent up but can probably be flattened out. Comes with both keys for the service door and cash box drawer. Electric light inside powered by 110v AC. Overall a very nice machine. Measures 48.5" tall on nickel plated cabriole legs, 22" wide, 20" deep.

Rosenfield Coin Op Stereo Viewer

Lot #2017a (Sale Order 21 of 306)

This is the Regent model coin operated stereo viewer made by the Rosenfield Co. of New York circa 1903. Refinished oak cabinet on wood cabriole style legs with glass ball and copper oxidized claw feet. Has the Regent plaque on the front door. All metal parts are copper oxidized finish. The mechanism was originally spring wound and battery for the light. It has been electrified with the original spring motor gone. The wiring should be checked. Operates well when a coin is deposited but some of the card frames need to be re soldered. The lock for the front door is currently removed and in the cash box and has no key. A replacement wood marquee has been added as well as a nicely done repro show card for the San Francisco earthquake. 12 repro stereo cards included. Claw and ball feet are loose and care should be taken when moving viewer. Measures 48.5" tall, 17.5" wide, 16.5"deep. Add 23" to height for removable marquee

Coin Op Stereo Card Viewer

Lot #2017b (Sale Order 22 of 306)

Circa 1905 coin operated stereo card viewer in oak cabinet. Originally used a spring motor and a battery for the light but has been updated with an electric motor and light. Operates on 110v. Refinished oak cabinet stands on wood legs and has applied carvings on the front door. The lock on the front door is open but there is no key. A reproduction oak marquee has been added with a very well done repro show card for The Great Chicago Fire. Deposit a coin to view 12 cards. Measures 43.5" tall, 21" wide, 18" deep. add 23" for the removable marquee.

Clamshell Mutoscope

Lot #2018 (Sale Order 23 of 306)

A classic coin op "clamshell" Mutoscope made by the American Mutoscope Co. of New Jersey, it features an all cast iron reel housing, access door, stand, and marquee. There are no aluminum replacement parts. The mechanism seems to be all original including the slug magnet on the coin chute. The reel is a newer Mutoscope replacement titled Sassy Sally featuring a woman in different suggestive poses on a bed. Older restoration on the case. The lock is a replacement. 110 volt power has been added to light the reel internally, and a light has been added over the marquee. Operates on 5 cents. Measures 80" tall including the marquee, 19" wide, 19" deep.

Cail-O-Scope Coin Op Stereo Card Viewer

Lot #2019 (Sale Order 24 of 306)

Restored and updated Cail-O-scope stereo card viewer by the Caille Bros. Mfg. Co. of Detroit, Michigan. Oak cabinet has been refinished with marbleized pillars on the front. Stands on Caille Bros. metal legs. All metal parts have been re plated with a copper oxidized finish. A reproduction oak marquee and show card advertising the 1906 San Francisco Earthquake has been added. Originally spring driven and lit by battery, the mechanicals have been updated with the original flip card mechanism now being driven by an electric motor and lit by a 110v light bulb. A coin mechanism has been added also. A good machine for a route. Measures 50" tall 20" wide, 18.5" deep. Add 20" for the marquee.

Autopede Flying Saucer Amusement Kiddie Ride

Lot #2020 (Sale Order 25 of 306)

Extremely rare Space Age carnival amusement park ride flying saucer UFO, made by L'Autopede of Belgium. This hand-fabricated metal 2-seat carousel ride object is in vintage science fiction style and an extremely rare piece of carnival/amusement park art complete with original antenna and working “clickity-clack” machine gun. This vintage space ride dates from the late 1950s. It's the smaller of two model sizes manufactured by L’Autopede and the hardest and rarest of the two versions to find still in existence. Supposedly, only 15 of this particular model were ever made and this is the first we have seen. Over the years, this flying saucer has been repainted and is in beautiful condition. A custom-made cover to protect the flying saucer for transport or storage is included. (cover does have traces of age and use). Please Note: Under the flying saucer, there are 4 metal legs to stand on. Dimensions: Height: 42.72 in. (108.50 cm) Width: 37.41 in. (95 cm) Depth: 43.31 in. (110 cm).

Police Motorcycle Coin Op Kiddie Ride

Lot #2022 (Sale Order 26 of 306)

Circa 1972 coin op kiddie ride made by Falgas. Nice recreation of a police motorcycle with good details. Has original Falgas seat. There is a broken plastic lens on the red light above the saddle bags which can easily be replaced. Coin mechs intact but there is no key for the coin box. Ride runs well. Measures 5' long, 25" wide, 5' tall.

Salesman's Sample/Miniature Jewel Fish Tank

Lot #2029 (Sale Order 27 of 306)

Salesman's Sample/Miniature Jewel Fish Tank, this is NOT a vintage item, but very well made, has bronze seahorse legs on base, marble shelf holds tank with bronze dolphin and 6 clam shell corners, 16"L x 10"W x 18"H

National Model 3 Wood Cash Register

Lot #2030 (Sale Order 28 of 306)

Inlaid Wood Model 3. Quarter sawn oak with granite shelf, brass trim and marquee, and black ebony inlay. Professionally restored working condition. Mechanism works as smooth as butter. Paper label on bottom of drawer shows that this machine was shipped to Ocala Florida to a J.J. Girig in March of 1894. Measures 24" tall, 19" wide, 17" deep.

Rare Monitor Cash Register

Lot #2031 (Sale Order 29 of 306)

Very rare circa 1895 cash register called "The Monitor". Original finish oak case with original locks and keys. Register drawer opens by inserting a steel check with amount of the sale. The checks stack up on 2 rods so that they can be counted at the end of the day to balance the register. In overall excellent original condition. Includes the impossible to find wood tray holding 104 original steel checks. The numbers on the checks look newer. Register measures 13.25" wide, 13.75" deep, 6" tall.

Restored No. 442 National Brass Cash Register

Lot #2032 (Sale Order 30 of 306)

A beautifully restored, working cash register that is extremely ornate and even has the side paper roll cover that is also very ornate. That brass sits on top of an oak wood cabinet. The inside drawer is clean, has paperwork glued underneath and nickeled hold downs for paper money and also a brass “Amount Purchased” marquee on top. A very, very attractive register. Measures 21”W x 16.5”D x 27”T.

National Cash Register Cabinet/Base

Lot #2033 (Sale Order 31 of 306)

National Cash Register cabinet/base. Font cabinet door has "National" in brass colored lettering. Cabinet has a large door with a drawer above it. The cabinet appears to have some modern restoration to the doors. A few small scratches or marks are on the sides but overall, this cabinet is in very good condition that would look amazing with your National Cash Register. See photos. Measures 34"T x 16"D x 22"W.

National Brass Cash Register #313 Replica Case

Lot #2034 (Sale Order 32 of 306)

An exact replica of the sought after National Cash Register No. 313. Highly polished brass case only, no interior mechanism. Comes with brass “Amount Purchased” marquee. Marbled front plate all sitting on wood base like the originals. Overall very good condition. Measures 21”H x 10”W x 15.5”D.

Vintage Country Store Quarter Sawn Register

Lot #2035 (Sale Order 33 of 306)

An oak and metal customer purchase charge account card register manufactured by the MC Caskey Register Co. used in old country stores and groceries. This one is complete with all the card hold-downs, a small withdraw money drawer and larger receipt drawer. Also has a nice gold manufactures decal on inside front. Overall good condition. Measures 28.5”T x 23”W x 22.5”D.

Vintage Art Deco High Point Cash Register

Lot #2036 (Sale Order 34 of 306)

A very, very unusual (we have never seen one like this) Art Deco style cash register. Exterior is wood and stainless with the price buttons sliding up and don to ring up the total shown at top. Every time the item price is rung up and side handle is pulled, the slides go back to zero and ready for next item price. A very unique looking and working register. A must for the Art Deco bar owner or gas station of that time. Working but no key. Overall good condition. Inside money drawer is clean. Measures 19 1/2" x 23" x 16".

Cash Register Black Wooden Stand

Lot #2037 (Sale Order 35 of 306)

A large wooden stand made to support the weight of older, heavier cash registers. Wood stand has a stepped base with no decorations and steps up to a wide column. Stand appears to have been painted a dark, matte color. Top is a flat rectangle. No markings or labels present on stand. Wood has some minor scratches and wear present but is in overall excellent, solid condition. Perfect companion piece to any cash register. Measures 22.25”D x 20.25”W x 31.5”T. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORT OR LOCAL PICKUP.

Rare Restored American #50 Brass Cash Register

Lot #2038 (Sale Order 36 of 306)

Another rare register from the world class collection. These registers have been restored to the fullest. Just absolutely beautiful. This restored American cash register is one of the finest you'll find, inside and out. Works correctly, has amount purchased marquee, keys, and side tape mechanism. Again, an eye catching item in any home, office, anywhere. Please look at the photos. When you look at the machines, you can definitely notice a difference in restorations. Measures 26" x 19" x 18".

Rare Vintage Brass National #35 Cash Register

Lot #2039 (Sale Order 37 of 306)

A highly restored (one of the prettiest, most ornate cash registers that you will ever see). The register is restored inside and out. Everything looks original from the top marquee, the front gallery bar, to the unique cash button pushes. This machine works perfectly and would definitely be a focal point in any home, business, or on top of a back bar. A few of the cash registers came from a world class collection and it might be awhile before registers like these will come up for sale again. Overall very, very good condition. STAND SOLD SEPARATELY #2039A. Measures 19" x 22" x 15".

Brown Wooden Stand

Lot #2039a (Sale Order 38 of 306)

A highly restored (one of the prettiest, most ornate cash registers that you will ever see). The register is restored inside and out. Everything looks original from the top marquee, the front gallery bar, to the unique cash button pushes. This machine works perfectly and would definitely be a focal point in any home, business, or on top of a back bar. A few of the cash registers came from a world class collection and it might be awhile before registers like these will come up for sale again. Overall very, very good condition. STAND SOLD SEPARATELY #2039A. Measures 19" x 22" x 15".

Restored Brass/Oak National 542-4C Cash Register

Lot #2040 (Sale Order 39 of 306)

A great brass and oak floor standing, 8 compartment, store model cash register. Quarter sawn oak, paneled sides, with lettered drawers, cash drawers, and storage. Comes with all the keys, brass amount purchased marquee, and rarely seen ornate paper roll cover. The register works well and looks complete down to the ornate foot protectors. Overall very good condition. Measures 69 1/2" x 29" x 20".

Charles Passow Table Base w/Wood Top

Lot #2041 (Sale Order 40 of 306)

A round, cast iron table base complete with wood top. Base is marked "Chas Passow& Sons/Chicago, ILL" and "Bar Fixtures & Billiard Tables". Cast iron base has a central column with top having 4 supports for wood top. Each support has 3 holes for mounting the wood top. Base has some wear with very minor rust present. Wood top is well worn with some scratches, scuffs, scrapes, and dings to table top. Table top measures 48.75" in diameter. Base measures 26.25"W x 26.25"D x 28.5"T. See photos.

Antique Burdick-Corbin Nickel Plated Cash Register

Lot #2042 (Sale Order 41 of 306)

An extremely ornate and original (including amount purchased marquee), nickel plated cash register. A wonderful, smaller register that has a slightly different look over the Nationals. This model is called "The Western" and even has the ID tag of who it was originally sold to. No cracks or chips and even the wood base is in good condition. Has a key, works very well with a clear drawer. See photos. A rare and unusual register. Overall very good condition. Measures 21 1/2" x 12 1/2" x 15".

W. Marvy Co. Model 405 Electric Barber Pole

Lot #2045 (Sale Order 42 of 306)

A small electric, wall mounted barber pole complete with mounting bracket and wiring by the William Marvy Company of St. Paul, MN. Bracket has a pair of plates with information for Model 405 barber pole. Classic red, white and blue spiral has no damage and glass is free of chips and cracks. End caps are slightly dirty and tarnished. Pole is fitted with reflective sheet metal backing to give cool reflections. Lights up when plugged in. Measures 24.25”T x 9.25”W x 8”D. See photos.

Beveled Edge Mirror with Shelf

Lot #2046 (Sale Order 43 of 306)

A beautiful beveled edge mirror on a black base with a glass shelf and 2 other smaller attachments. Mirror takes up the top half with a glass shelf below it. Excellent condition with no cracks or chips in the glass or mirror. Would make a great addition to a bathroom. Measures 33.5"T x 25"W.

Early Antique Restored Oak "Koken" Barber Chair

Lot #2047 (Sale Order 44 of 306)

Early oak wood beautifully restored barber chair manufactured by The Koken Barber Supply Co., and cast parts have been re-nickeled. Deep burgundy material surrounded by brass tacks. Chair sits on four orange wood legs with iron claw foot caps. Original headrest and beautiful early chair, in very good condition. 47" high x 27" wide x 44" deep. See photos.

Vintage Bob White Barber Pole Sign

Lot #2048 (Sale Order 45 of 306)

A metal sign imitating a barber pole with the words "Modern Service" on the front of it. Bottom of sign is marked "Bob White Sign Co, Milwaukee/Pat. No. 1,688,017.". Front of porcelain sign is in good condition with some minor rust on edges and a large patch of finish missing on blue star spangled globe. Bottom edge has a patch of rust and missing finish. Measures 9"W x 48"T x 3"D.

W. Marvy Co. Model 405 Electric Barber Pole

Lot #2049 (Sale Order 46 of 306)

A small electric, wall mounted barber pole complete with mounting bracket and wiring by the William Marvy Company of St. Paul, MN. Bracket has a pair of plates with information for Model 405 barber pole. Classic red, white and blue spiral has no damage and glass is free of chips and cracks. End caps are slightly dirty and tarnished. Pole is fitted with reflective sheet metal backing to give cool reflections. Lights up when plugged in. Measures 24.25”T x 9.25”W x 8”D. See photos.

Wall Mounted Electric Barber Pole

Lot #2050 (Sale Order 47 of 306)

An electric, wall mounted barber pole with mounting bracket and wiring. Classic red, white and blue spiral has some minor wear to paint and glass appears free of chips and cracks. End caps are slightly dirty and tarnished. Mounting bracket is devoid of markings. Comes with power cord. Lights up when plugged in. Measures 28”T x 7.75”W x 11.5”D. See photos.

Oak Barbershop Back Bar

Lot #2051 (Sale Order 48 of 306)

Beautifully restored 2 station oak barbershop back bar circa 1900. Left and right stations with center mirror. Each station has a cabinet with 2 oak framed glass doors with adjustable oak shelves for mugs, bottles, etc. Full length beveled plate glass center mirror. Overall in VG condition. Comes apart in 3 pieces. Measures 12' wide, 8' tall, 6" deep.

Vintage Leaded Glass Slag Ceiling Shade

Lot #2052 (Sale Order 49 of 306)

Grape vine design on large ceiling shade with curved top panel. Ornate side configuration and rarely seen additional top gas fixtures. The main lamp has been electrified. Overall very good condition with just a few side glass hairline cracks. Measures 15" x 26".

Lot Of Vintage shaving Mugs

Lot #2053 (Sale Order 50 of 306)

Lot consists 20 shaving mugs and 3 lather brushes. Most of the mugs are named to their owners. No occupational mugs. All in good condition.

Unusual Cast Iron Barber Shop Sink

Lot #2054 (Sale Order 51 of 306)

Unusual Cast Iron Barber Shop Sink. This attractive barber shop sink with its oval basin and tapering, fluted column has its two original faucets with usual wear on faucets and porcelain handles as well as its original drain stopper mechanism. Cast iron base and column are in good condition however the original porcelain may have been re glazed some time ago in white. Has usual scrapes and wear, see photos. Basin measures 27.5"W x 20.5"D x 30"T excluding faucets. Base measures 13.5" in diameter. See photos

Barbershop Sink

Lot #2055 (Sale Order 52 of 306)

Original condition sink from a Chicago Barbershop. Oval top with fluted base. Hot and cold faucets. Needs restoration. Measures 30" tall, 28" wide, 20" deep.

Yale Oversized Key Advertising Sign

Lot #2056 (Sale Order 53 of 306)

A large oversized key sign with the key reading “Yale” and “Made in England”. Key has an attached chain for hanging on wall. Key has some scratches and wear to paint but is in overall good condition. Measures 30.625”L x 13”T x 0.75”W. See photos.

Magnificent Barber Shop Coat/Hat Rack

Lot #2057 (Sale Order 54 of 306)

A magnificent and scarce barber shop coat/hat rack with brass coat hooks and adornments on a pine frame stained mahogany, base is white porcelain and brass. Nice wood finial sits on top of a majestic stand completing its 94" tall stature. Base has some worn paint around one side but the center mast and the top brass hooks are in excellent condition. A great addition to any shop!

Emil J. Paidar Barber Chair

Lot #2058 (Sale Order 55 of 306)

Made by Emil J. Paidar Company of Chicago Illinois. Original leather and comes with headrest and leather razor sharpener. Chrome plated arms have some wear but are still in good condition. Cushions have some scratches in the leather but the chair is in overall good condition. Measures 45" high x 28" wide x 45" deep. See photos.

Harley Davidson Restored "Koken" Barber Chair

Lot #2059 (Sale Order 56 of 306)

Nicely restored porcelain "Koken" barber chair with (normally missing) headrest orange vinyl material with brass button trim. Harley Davidson material patches. Overall in good condition. Razor strop strap included. 48" high x 28" wide x 45" deep. See photos.

Vintage Original "Koken" Barber Chair

Lot #2060 (Sale Order 57 of 306)

Original barber chair made by The Koken Manufacturing Company. Original leather material with two tears in seat cushion. Chrome is in good condition, but needs cleaning. Original headrest (which is usually missing), porcelain base, overall fair to good condition. Included is the razor strap. 45" high x 28" wide x 45" deep. See photos.

Child's Barber Chair with Horse Head

Lot #2061 (Sale Order 58 of 306)

A children’s barber chair with a horse head attached to the front to keep young children distracted as the barber cuts their hair. Pump works on the chair but could use some adjustments. Pulling the side handle all the way back locks the chair in place preventing it from spinning. Some minor paint wear on the horse and the chair but over 95% of the original paint is still present. Handle is tarnished and padded seats are in excellent condition. Horse head is adjustable. See photos. Measures 48”T x 38”D x 20”W.

Jandus C Frame Electric Fan

Lot #2069 (Sale Order 59 of 306)

A restored circa 1905 Jandus C frame 4 blade electric fan made by Adams Bagnall Electric Co. of Cleveland Ohio. It runs smooth and oscillates. Absolutely beautiful, you will not find a nicer one. The blade measures 12" across, and the total height is 18.5".

Vintage Wood Telephone Booth with Phone

Lot #2070 (Sale Order 60 of 306)

Vintage bifold doors with full length glass, original bell coin op telephone with marquee, advertising paper, instruction paper and key. Electric exhaust fan with light, metal shelf, wood seat, and phonebook holder with cable. Porcelain inside panels and original formed rubber type flooring. Contemporary porcelain signs on each side of the booth. Also, brass lower kick plates on each side, overall good condition. 81.5" high x 32.5" wide x 32" deep. See photos.

48" Round Telephone Sign

Lot #2070a (Sale Order 61 of 306)

A 48" round metal sign for the Associated Telephone Company, that went bankrupt in 1933 during the Great Depression. This sign is rarer to see due to the size and style. Surfaces have rust spots coming through the worn paint as shown in the photos. Overall good condition. See photos.

Cyril Colnik Iron Bracket

Lot #2071 (Sale Order 62 of 306)

Attributed to Cyril Colnik, Milwaukee blacksmith born in Austria (1871-1958) and purchased from his daughter in 1960. The craftsman who made this hand forged wrought iron bracket sign holder constructed it without welding. The pieces are pinned together. This was most likely architectural accent for a sign. It measures 63"T at the wall by and sticks out from the wall 60", which makes it perfect for an antique, two sided wood sign. You can see in the photos that there is an old rust surface and this bracket is strong with no problems or restorations. Truly a one of a kind treasure from the past! Don't miss out. Consigner is willing to, on request, furnish a letter of original purchase. The sign holder was one of many pieces of Cyril's work that was purchased from his daughter, Gretcher Colnik before her death in Milwaukee, WI. Work is exhibited in Milwaukee at Villa Terrace Art Museum. Measures 61"L x 62.5"T x 17.125"W. See photos. Link below contains more information and reading about Cyril Colnik. https://onmilwaukee.com/articles/colnik

Black Americana Floor Lamp

Lot #2072 (Sale Order 63 of 306)

A Black Americana floor lamp of a young man holding a torch on a pedestal. Glass globe covering the light bulb does not have any cracks or chips. Cable is in very good condition but appears to be a newer cable spliced onto the original one near the top by the man's leg. Light socket and torch could use some tightening. Spots of paint wear on the edges from use and age. Untested. Overall good condition. See photos. Measures about 55"T x 11"W x 11"D.

Diana Goddess Marble Bust Pedestal

Lot #2073 (Sale Order 64 of 306)

A three piece marble bust pedestal consisting of the base, an extension, and the bust. The bust is what appears to resemble the Roman Goddess Diana of wild animals and the hunt, although is not confirmed. The base is marked "Sapho" on the front. Has a few small cracks and chips but overall a nice display piece. Crown appears to have some repairs as does part of the center post. Very good condition. Overall measures 59.5"T x 14"W. ITEM IS HEAVY AND WILL REQUIRE THIRD PARTY TRANSPORTER

18th Century Carved Wooden Statue

Lot #2074 (Sale Order 65 of 306)

A statue of a wooden man carved from a solid block of wood, sometime in the 18th Century. Statue is highly detailed with the man carrying a basket and “wearing” a hat with upturned brim, a jacket/coat, a button up shirt, pants, and buckle shoes. Statue has numerous small dents and nicks throughout. Back of right elbow has a crack. A very nice carving and one that surely took a lot of time and energy to make. Measures 47”T x 21.25”W x 15.5”D. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORT OR LOCAL PICKUP.

Wood Carving Of A 19th Century Boatswain

Lot #2075 (Sale Order 66 of 306)

A well executed whimsical carving of a ships Boatswain (boss of the deck). The figure and base are hand carved and painted wood. He is wearing a leather belt with a sheathed cutlass, has a boarding axe cradled in his arm, a cat-o-nine tails around his wrist, and is blowing a Bosun's whistle. It is an older carving but the vintage is unknown. The family did say that it was purchased in England many years ago so it might be a sailor's folk art statue. The figure stands 28.5" tall on an 8" base for a total of 36.5"

1893 Life Size Gypsy Fortune Teller Statue

Lot #2076 (Sale Order 67 of 306)

This statue was originally exhibited and purchased at the Columbian Exposition held in Chicago in 1893 which celebrated the 400th anniversary of Columbus' voyage. It was eventually owned by William Anastos who used it as part of the décor at the Cairo Supper Club located at 4015 N. Sheridan Rd. in Chicago. The Cairo which opened in 1949, was a popular Chicago night spot that featured top name live entertainment. On May 11, 1964 the club was firebombed as part of the Chicago mob’s control of the Chicago restaurant & bar industry. There was extensive damage to the club and it never reopened. The statue suffered damage to the table legs but was salvaged from the debris. The legs were repaired and Anastos eventually sold the statue to a suburban antique dealer who has had it in his possession for over 50 years. The proper title of the statue is La Diseuse De Bonaventure – The Fortune Teller of Bonaventure. It is life size and has a polychrome finish. In overall very good condition with the exception of the repaired legs. A unique piece of Chicago history. Measures 58”T x 22”W x 25”D.

Pair Bronze Exterior Pediments (2)

Lot #2077 (Sale Order 68 of 306)

Fancy ornamental over the entrance door pediments from the First National Bank in Chicago which is now the Chase Tower on 10 S. Wabash. Classic shell, leaf and scroll design. Circa 1900's. Overall good patina condition. Came from Chase Tower in Chicago formally known as First National Bank. Measurements 60"W, 26"T, 4"D. Each piece weighs 85 pounds. Will require local pick up or a 3rd party transporter.

Vintage "William Tell" Cast Iron Mechanic Bank

Lot #2078 (Sale Order 69 of 306)

An original cast iron bank depicting William Tell shooting an apple off of a boys head. Looks to be complete. Some light wear, small nicks and scratches. Missing bottom coin compartment plug or cap. Overall good condition. 6 3/4" x 10 1/2" x 3.3/4".

Tall Wooden Display Pedestal

Lot #2079 (Sale Order 70 of 306)

A tall wooden display stand perfect for displaying anything that needs some height to highlight. Pedestal has stone corners with brass décor on sides and corners with side panels featuring dragon heads above and below an eagle. Top of side panels feature a pair of winged chimeras for each side. Top of corners has a winged bust of a woman, acting as a topper for the stone beams. 4 styled brass feet lift the pedestal off the floor slightly. Top of pedestal has granite top plate upon which the item would sit. Wood is in very good condition with visible seams (not cracks!) near the top of some side panels. Wood has a few minor scuffs and dings. Brass décor has some minor tarnishing with one of the busts having a small hole in the right cheek. One of the stone beams has some sort of adhesive stuck to it beneath the leaf décor. Measures 51.75”T x 18.875”W x 18.875”D. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORT OR LOCAL PICKUP.

Tall Wooden Display Pedestal

Lot #2080 (Sale Order 71 of 306)

At WWT A tall wooden display pedestal perfect for displaying anything that needs some height to highlight. Pedestal has stone corners with brass décor on sides and corners with side panels featuring dragon heads above and below an eagle. Top of side panels feature a pair of winged chimeras for each side. Top of corners has a winged bust of a woman, acting as a topper for the stone beams. 4 styled brass feet lift the pedestal off the floor slightly. Top of pedestal has granite top plate upon which the item would sit. Wood is in very good condition with visible seams (not cracks!) near the top of some side panels. Wood has a few minor scuffs and dings. Brass décor has some minor tarnishing with the busts losing some of their shiny luster. One of the wooden sides has some veneer chips and cracks. Measures 51.75”T x 18.875”W x 18.875”D. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORT OR LOCAL PICK UP.

Matched Pair of Ornate Carved Stands

Lot #2081 (Sale Order 72 of 306)

A matching pair or ornate wood carved stands, great for displaying small plants or other nick knacks. Each stand has a crane or other type of bird with a fish in their mouth, facing opposite directions. Top of the stands are made to look like leaves from a plant. Overall, very good to excellent condition. These stands would go great in any home. See photos. Measures 38”T.

Monumental Napoleon as Emperor Oil Painting

Lot #2082 (Sale Order 73 of 306)

After Marie-Guillemine Benoist, Napoleon as Emperor. A mid to late 20th century copy of the artist's work bearing the original artist's name in the lower right corner. Painting measures 62"W x 87.5"T, frame measures 75"W x ~99"T. Overall good condition with possible relining. See photos.

Harvard Co Oak Dental Cabinet

Lot #2083 (Sale Order 74 of 306)

Outstanding oak dental cabinet made by the Harvard Co. of Canton, Ohio circa 1890's. This cabinet has everything; swing out drawers, tambour door with more swing out drawers, a drop front desk, and pull out shelves with milk glass work plates. Older restoration with everything working properly such as trays, doors, drawers, and tambour.. 3rd drawer on left has a chunk of wood missing top left (see pics). Great for your smalls collections. Measures 78" tall, 38" wide, 17" deep PLEASE note break in top of the drawer, third one down on left side.

Full Brass Bed Frame W/Demi Canopy Provision

Lot #2084 (Sale Order 75 of 306)

A large brass and steel/iron bed frame with the back frame board having a provision for hanging a partial/demi canopy. Mattress supports and vertical legs are steel in a brass color with ornate brass stylizations and finials. Part of the stylizations also consist of a chrysanthemum centered between the double ended spirals. Three of the legs have casters, the last leg has a wooden peg in place of the caster. Horizontal mattress supports have some wear with some small patches of rust. Vertical supports mostly retain their shiny finish with some tarnishing to brass decoration and some minor finish loss to steel supports. Horizontal mattress supports measure 54.5"W x 76"L, approximately for a full size mattress. A very attractive and stylistic bed frame. Measures 55.5"W x 82"L x 94"T. See photos.

Large Carved Philippine Mahogany Display Cabinet

Lot #2085 (Sale Order 76 of 306)

Heavily carved Philippine mahogany display cabinet most likely of Indonesian origin. Features 2 locking seven light beveled glass arched doors on front and six beveled glass lights on each side. Interior has 2 wood shelves and a mirror back. The heavily carved gallery features animals and birds hiding in a vine like matrix. The front has carved flowers and inset hand hammered decorative iron door hinges. There are 2 pull out drawers with iron pulls below the glass doors. The bottom features heavy cabriole style legs with carved ball and claw feet. The skirt is also heavily carved with carved angel faces on the ends. The cabinet breaks down into easily transported pieces. Measures 7'-6" tall, 54" wide, 30" deep.

Large Oak Jeweler Cabinet

Lot #2086 (Sale Order 77 of 306)

Large oak jewelers cabinet with 2 glass doors on top with 4 adjustable shelves and unusual push button brass door releases, 2 curved glass horizontal cylinder doors in the center with brass Eastlake pulls and 3 pull out shelves below, and 3 glass doors on the bottom section.. Gallery on top is removable, 3 pieces total. Finished oak panels on both sides. A statement piece for sure. Measures 114"T with the gallery and 98"T without x 72"W x 27"D

Favorite Stove & Range Co. Cast Iron Stove

Lot #2087 (Sale Order 78 of 306)

A vintage cast iron stove made by the Favorite Stove & Range Company of Piqua, OH. Stove front door is marked "Favorite/No. 514/Air Tight/Base Door/And Registers". Door opens with twist of handle on right side and registers open and close as intended. The top section features a pair of opening doors with small plastic(?) windows for access to interior. Top of stove is topped with ornate brass finial. Stove is decorated with intricate patterns on exterior. Interior of stove has some rust with age and use. Some wear to metal finish and minor stains present on exterior. Overall good to very good condition. Measures ~68"T x 28"W x 24.5"D. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORT OR LOCAL PICKUP.

Black & Grey Civil War Themed Safe

Lot #2088 (Sale Order 79 of 306)

A black and gray painted safe with the front having US Civil War scenes with the crossed Union and Confederacy flags and a cannon with the number "1862" painted beneath it. Safe is on wheels that are fixed for side to side motion only. Comes with large brass key to open front door. A nice safe overall. Measures 21"W x 20"D x 31.5"T. See photos. HEAVY ITEM, WILL REQUIRE THRID PARTY TRANSPORTER OR LOCAL PICKUP.

Meilink's Home Deposit Vault Iron Safe

Lot #2089 (Sale Order 80 of 306)

An iron safe painted black with gold pinstriping. Safe has a monument depicted in a small image on the front door. Some wear to black paint and pinstriping. Some minor pitting and finish flaking on door handle marked "c/43427". Inside of safe has 3 drawers. Safe is on 4 fixed wheels that only move sideways. Combination unknown. Measures 16"W x 20"D x 25"T. HEAVY OBJECT, WILL REQUIRE THIRD PARTY TRANSPORTER. WILL NOT SHIP IN HOUSE!

Victorian Newel Post Lamp

Lot #2090 (Sale Order 81 of 306)

Victorian newel post lamp of a young girl with a flower wreath around her. Lamp has 3 light sockets with bulbs in each that resemble flower parts. Shades around them are glass petals. Lamp parts appear to be bronze. Missing a finger on the right hand of the woman. Cord is in good condition for the age. A nice and unique design. Measures 31"T x 17"W.

Ideal Stencil Machine

Lot #2091 (Sale Order 82 of 306)

Cast iron Ideal Stencil Machine Co. stencil machine. Made in the early 20th century, this machine would print letters and characters into paper by turning the wheel to the desired letters and pulling the lever. Machine appears to be in working condition. Character wheel has been cracked in half at the top but has been repaired. Machine has various plaques on the front. See photos.

Antique International Time Clock

Lot #2092 (Sale Order 83 of 306)

Very early factory time clock manufactured by the International Time Recording Co. This one looks fairly complete with majority of front employee button tags (missing just two). Complete punch arm, has clock glass, inside instructions, original paper on back, key and lock for left side door, (missing glass on door), looks to be complete on inside. Right side door complete. Quarter sawn oak cabinet in good condition with some weathering on top veneer. Extra time sheets with clock. Overall good condition. The height of these clocks make for unique end tables. 35.5" high x 27" wide x 24.5" deep. See photos.

Michael Garman's City Scape Door Window

Lot #2093 (Sale Order 84 of 306)

Michael Garman's City Scape Door Window without Magic. Michael Garman was born in 1938 in Fort Worth Texas and started making miniature cowboys when he was 8 out of pipe cleaners. He would later travel throughout Mexico going door to door selling one of a kind hand made crafts to make a living. In the 1960's Garman moved to San Francisco and decided to make his art more accessible to everyone and stopped making one of a kind work. In 1975, he started his 40 year long project of Magic Town. The town was highly detailed and showed off various people in their everyday lives and the stories behind them. You could see a teacher teaching piano lessons or a cook having a smoke break in the back alley of his restaurant. All of his pieces made up 3000 square feet. This piece is one of his earlier ones, being made in 1975 and retired in 1978. This 1:6 scale model of one of Garman's favorite characters, Spence, features a highly detailed piece of Spence's front door as he gazes out of it. Chipped red bricks, cracks in the sidewalk, trash can full of garbage with some spilling out into the street, even dust on the broken windows are all part of his work. Top of the piece has a hatch with 2 light bulbs that shine light down onto his work. Cable for lights is in good condition. This piece is in pristine condition and comes with a letter from the Michael Garman Museum. Measures 19 1/2"W x 9 3/4"D x 27"T.

A Warrior's Treachery Film Poster

Lot #2094 (Sale Order 85 of 306)

Large hand painted on canvas banner for the short 1911 silent film, "A Warrior's Treachery" made by Bison Films. Bison Film Company was an American film studio that produced silent films from 1909 - 1917. It partnered with Miller Brothers 101 Ranch in Oklahoma to lease 20,000 acres and build a Western town set and an Indian village and make silent film "Westerns" with stars including Tom Mix, Buck Jones, Hoot Gibson and Will Rogers. This hand painted banner was most probably used by a traveling show that traveled the countryside showing movies under tent before the days of fixed movie theaters. Overall condition is good with some fading and ragged edges in the canvas. Currently tacked to a board for backing. An unbelievable historic artifact from the early days of motion picture history.. Measures about 50"W x 70"T. A great piece of early movie history.

Buck Rogers Movie Poster

Lot #2094a (Sale Order 86 of 306)

1960’s one sheet Buck Rogers re-release framed movie poster. The original 1939 production was a 12 chapter serial shown in movie theaters. Poster has been folded. Framed with archival glass measuring 43” tall, 30” wide.

Verne To Vader Large Format Print by Todd Schorr

Lot #2096 (Sale Order 87 of 306)

This wonderful large format print is essentially a chronological history of science fiction from Jules Verne all the way to Darth Vader hence called “Verne to Vader”. Todd Schorr, in his truly unique style, has caught the true feeling of the science fiction world with his expressive tones combining realism with fantasy in a style unlike any other. This framed print would truly be a centerpiece item for any collection. We know of no other print this size in existence. A copy of Schorr's 304 page hard cover book Neverlasting Miracles is included. There is a pair of minor blemishes/creases otherwise print is in excellent condition with bright vibrant color and wonderful detail. The last 6 images show the creation of the original image. Measures 76" wide, 40" tall.

Retro 1-2-3 Acme Towing “Dbl Boom” Wrecker NIB

Lot #2097 (Sale Order 88 of 306)

Manufactured by Retro 1-2-3 in 2003, this 1:8 scale pressed steel model has never been opened and actually still has one of its original yellow banding straps. The model includes working rotating booms, adjustable outriggers and sliding driver’s cab pocket doors. This model is serial #102 of 275 produced. This model measures 24”L x 9”W x 12”H. Packed in original box with original inserts.

Soda Fountain Leaded Glass Windows

Lot #2099 (Sale Order 89 of 306)

3 slag and leaded glass windows from a soda fountain ice cream parlor. Probably from a window transom or a back bar. The 2 smaller windows are ice cream sundaes and the larger window has a floral theme. There are no wood frames The sundae windows measure 24" wide X 11" tall each and the center window measures 48" wide X 11" tall.

Vintage Buffalo Peanut Warmer

Lot #2100 (Sale Order 90 of 306)

A vintage peanut warmer made by A. Elsinghorst Buffalo, N.Y. circa 1900. A street vendor would use a cabinet like this to sell hot peanuts in bags. solid copper warming / display cabinet with glass sides and a solid copper top. There is a vent hole used to fill the lower part of the cabinet with water which would be heated by the kerosene burner in the stand. The warmer fits into a metal stand on legs that houses the burner which warmed the water. There is only part of the burner remaining. The fuel pipe and external fuel tank are missing. A picture from an original catalog shows what it looked like. The front of the stand has attached letters that reads HOT. In overall good original condition. Measures 38" tall, 17" wide, 13" deep.

Vintage Oak Cylinder Door Beer Cooler Merchandiser

Lot #2101 (Sale Order 91 of 306)

Beautiful early 1900's oak cooler most likely from a saloon. Solid oak construction paneled on 3 sides with all matching original solid brass hardware. Front features 2 cylinder doors with curved plate glass, 2 doors above with glass and adjustable shelves, 2 paneled lower doors with storage. Sides both have a vertical door which was probably where the ice block went. Most of these units were later converted for remote compressor refrigeration. It is topped with a crown molding. Currently mounted on wheels for easy moving. Measures 7'3" tall, 45.5" wide, 42" deep.

1950's Style Table w/ 2 Booth Benches

Lot #2102 (Sale Order 92 of 306)

A great booth setup that resembles the 1950's American diner style with red and white coloring. Table has a white top with an extended metal band wrapping around the entirety of the edge. Booths are made from pleather with white strips in between the stitching. Booths have very minor wear on the top edge and back of the white center but are comfortable to sit in for extended periods of time. Table measures 44.5"W x 29.5"D x 30"T. Booths each measure 43.5"W x 23"D x 36"T. A very good collection for collectors.

Restored Victor C-21 Coke Cooler Bar

Lot #2103 (Sale Order 93 of 306)

Restored Victor C-21 Coke cooler and bar. 2 doors with embossed front and sides with bottle opener. Red Formica bar top reads "Have A Coke" flanked by 2 bottle caps. In excellent condition, it does not look like it has been used since restoration. Great for any collector or for a business. Measures 56"W x 32"D x 42"T. See photos.

Crazy Singing Coca-Cola Clown Display

Lot #2104 (Sale Order 94 of 306)

A large display topped with a crazy singing clown advertising Coca-Cola. Clown is in rubberized polka dot clothing and has a Coke bottle on his nose. Clown also has symbols(instruments) and is seated on top of a drum with the "Coca Cola" name in red on both sides. Display is mounted to a wooden base with wheels and power cord. Clown has some wear with some paint chips and some stains, fading, and a tear in his clothing. Radio marked "Silvertone" with two knobs on front. Display activates and functions as intended. A very wacky display and a very large one at that. Measures 43"W x 46"D x 96"T. See photos. LARGE ITEM, REQUIRES THIRD PARTY TRANSPORTER OR LOCAL PICKUP ONLY.

Vintage Restored Coin Op Aristocrat Popcorn Machin

Lot #2107 (Sale Order 95 of 306)

Professionally restored Aristocrat popcorn vender, coin operated, dime machine. All original parts re chromed, refinished inside and out with automotive finish, pinstriped and lettered. Electric with on/off switch. One side glass missing otherwise in very good condition. With keys. Measures 62" x 15" x 20".

Nickel Mint Popcorn Machine

Lot #2108 (Sale Order 96 of 306)

Popcorn machine with rotating peanut roaster made by the Bartholomew Company. Nicknamed the Nickel Mint, this wheeled cart allows for on the go peanut roasting and popcorn making without any external resources. The glass case has 2 sections, one for popcorn and the other for displays of peanut bags. Top of the peanut roaster and popcorn machine have copper plated panels for heat retention and style. Machine appears to be missing a few parts such as the belts for the roaster and possibly some gears. Cart sits atop 20" wheels with simple shock absorbers for nice transportation. Cart does not include a battery or other power source but has room for one under the popcorn area. Overall, a nice early popcorn cart. Measures 24"W x 61"T x 45"L.

Dormeyer Milkshake Maker/Drink Mixer

Lot #2109 (Sale Order 97 of 306)

Model 7000 drink mixer, serial number 04778. Front plate is in very good condition as is the cup and other metal surfaces. Cord has a rip in the rubber covering but does not cause any issues. Safety mechanism prevents the machine from running without the cup installed. Overall, very good condition. Measures 19”T.

Oster Milkshake Maker

Lot #2110 (Sale Order 98 of 306)

Model unknown. Comes with cup. Finish on the metal has some wear from age and use. Nice teal green color resembling the styles from the 1950’s. One screw on the top has some damage but the screw is still holding the machine together. Working condition but does not have any safety measures. See photos. Measures 19”T.

Hamilton Beach Milkshake Maker

Lot #2111 (Sale Order 99 of 306)

Model 30 milkshake maker. Comes with cup. Cord is in very good condition. Metal has some wear from age and use but this machine is in very good condition. Cord appears to be newer. Great for spending time with the family. Measures 19”T.

Hamilton Beach Drink Master Mixer

Lot #2112 (Sale Order 100 of 306)

A nice drink mixer with 2 settings, a slower and a high speed setting denoted by the switch. Mixer does not have an on/off switch and instead relies on the safety mechanism of the cup being inserted to start. Starts off slowly and quickly gains speed in case the cup was accidently placed. Has some wear from use but overall, very nice condition. Cord appears to be newer. Measures 19”T.

Bishop & Babcock Co Electric Lamp W/Taps

Lot #2113 (Sale Order 101 of 306)

An electric lamp made by the Bishop & Babcock Company of Cleveland, Ohio. Lamp has 3 sockets each with an opaque white glass shade and a pair of sockets near the central column under a green slag glass lamp shade. Additionally, lamp has a pair of taps branching off the center column at a 90 degree angle to each other. Lamp stands atop a square marble base with 4 decorated brass feet. Center column has some wear and brass top and three arms have some tarnishing. Glass shades and marble base appear free of cracks. Lamp does light up from all bulbs when plugged in. A very stunning and ornate lamp. Measures 42.75"T x 21.25"W x 18.25"D. See photos.

Vintage Oak Single Arch Soda Fountain Backbar

Lot #2114 (Sale Order 102 of 306)

Vintage Oak, mirrored, single arch soda fountain backbar with side beveled mirrors, upper leaded glass panels and three tulip shade lighting. A large single piece of 1.5" thick white marble sits between the top and bottom cabinet, the oak bottom cabinet has six reset paneled doors with polished brass hinges, inside has wood shelving and is clean. In the center of the back bar mirror is a reverse on glass Coca Cola advertising sign. These signs were usually used in this manor and were almost impossible to remove without breaking, thus being somewhat rare. Overall in good condition. Some chipping to front edge of marble. A few lite scuffs and scratches on lower cabinet. Some lite scuffs on glass around sign. 108" high x 20" deep x 120" wide. See photos.

Stainless Steel Soda Fountain Front Bar

Lot #2115 (Sale Order 103 of 306)

On original soda fountain stainless steel front bar with double sink, two ball tap soda spigots, and ceramic style syrup containers with tops and pumps. Surrounding the vintage unit is a more beautiful highly detailed contemporary bar top and front. The surround is made of oak with paneled sections and wainscote. Three oak corbels support top bar. There are contemporary Coke signs decorating front and sides. This surround was definitely professionally constructed and well designed. Overall in very good condition. 41" deep x 59" high x 92.5" wide. See photos.

Dole-Selmix Carbonator

Lot #2116 (Sale Order 104 of 306)

A carbonator in original box by Dole-Selmix. Used to supply carbonation to water for soda fountain units. Carbonator has a Jo-Bell Products Inc. Model J-385 sensor and an Emerson Electric model S55JXWT-1214 motor. Unit is mounted to a stamped steel base. Appears to be in like new condition. Power cord present with no plug. Untested. Unit measures 14.25T x 16"L x 6.75"W. See photos.

Coca-Cola Ceiling Fan W/Stained Glass Light

Lot #2117 (Sale Order 105 of 306)

Coca Cola ceiling fan with stained glass lamp shades and dome. Glass is colored in red, green and white and is attached to a bronze colored frame. Each of the pull strings for the fan and light have a bottle with a brown liquid inside, possibly Coca Cola or syrup. 5 wooden fan blades. No chips or cracks in the glass. Top where the fan would attach to the ceiling has some wear but overall, this is a very good fan. Measures about 19"T x 54" in diameter.

Lot of 4 Small Stools

Lot #2118 (Sale Order 106 of 306)

Lot consists of 4 padded stools with red painted column welded to a dark blue base. All stools are upholstered with black leather and have swiveling seats. Bases are numbered with different part numbers. Stools have some minor wear to paint and leather but are in overall good condition. Each measures 19.5"T x 15.5" in diameter. See photos.

Coca-Cola Vendor Push Cart w/Umbrella

Lot #2119 (Sale Order 107 of 306)

Contemporary Coca Cola vendor push cart in new condition. Logo embossed on sides. Built in electric cooling unit operates on 110v. Perfect for home use or as a mobile refreshment stand. Comes with umbrella. Cooler measures 32" tall, 36" long, 22" wide without umbrella

Home Products Corp. Round Coca-Cola Cooler/Icebox

Lot #2120 (Sale Order 108 of 306)

A large cylindrical Coca Cola cooler with 2 doors. Cooler/icebox appears very similar to the antique White Frost unique cylindrical icebox. Interior of cooler is large cylindrical space with a metal shelf and space beneath shelf for ice. Top hatch works on brass hinges with a brass handle. Inside of top hatch marked "Patented/The Home Products Corporation/Jackson Michigan". White front door has Coca Cola decal as well as a decal of a Coca Cola bottle. Black interior has some minor wear and is dusty. Some minor paint chips present to exterior. Stands on 4 metal legs. Comes with three red brackets that have some wear to red paint. A great piece of Coca Cola advertising. Measures 47.75"T x 27"W x 27"D. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORTER OR LOCAL PICKUP.

Large Fountain Service Coca-Cola Sign

Lot #2121 (Sale Order 109 of 306)

A large single sided porcelain sign reading "Fountain Service/Drink Coca-Cola/Delicious and Refreshing". The "C" in "Coca" has an orange marking reading "Trade Mark/Reg. U.S. Pat. Off.". Bottom left corner is marked "Cameo L.A." and bottom right corner is marked "Made in U.S.A. 1933". Sign has 8 mounting holes with 3 each on top and bottom and one on each side. Sign is in overall very good condition with a few minor rust spots on back. Measures ~92"W x ~60"T. See photos.

Coca-Cola Pepsin Gum Case

Lot #2121a (Sale Order 110 of 306)

A wooden Coca Cola pepsin gum case with 3 sides having glass windows for display. The Coca Cola pepsin gum was made by a separate company from Coca Cola but had the rights to license their gum with Coca Cola's name. The edition of pepsin to the name was made when the company sold their assets to the Franklin-Caro Company in 1911. Front door has a simple latch to lock the door in place and has a nice decal on the glass. All glass panels are in excellent condition. Back of the case had a mirror but has been broken. Overall, a nice and unique display case for the gum. See photos for more details. Measures 8"D x 12"W x 15.5"T.

1948 Coca-Cola Wall Clock

Lot #2122 (Sale Order 111 of 306)

A nice modern Coca Cola electric wall clock made by Kay in June 1948. This clock comes with the original paper warranty and information sticker on the back, although has fallen off. Right side on the back has a print of the company marks saying made for Coca Cola by Kay Inc. Hour hand does not appear to be attached properly to the center shaft while the minute hand is. Will require some adjustments to get it back to full working condition. A great display piece none the less. Measures 36.5"W x 18.5"T.

Coca-Cola Clock

Lot #2123 (Sale Order 112 of 306)

Coca Cola clock made by Dualite Inc. Clock back lifts up to expose the insides of the clock and has 2 light sockets. Cord is in excellent condition. Bottom of the white plastic has a broken piece as seen in the photos but still holds together. Overall good condition. See photos. Measures 16.5" in diameter.

Vintage Large French Coca-Cola Tin Sign

Lot #2124 (Sale Order 113 of 306)

A large vintage tin sign advertising Coca Cola, 5 to 6 in color, showing the large Coke bottle. This sign has character. It is bent, dented, dinged, creased, rusted, scuffed, scratched, etc. but it just has that special look. See photos. Measures 60" x 36".

Coca-Cola Silhouette Thermometer

Lot #2125 (Sale Order 114 of 306)

1939 Coca Cola thermometer with the silhouette woman drinking a Coke at the bottom. Thermometer backing is made from tin and has a few scuffs from age, a long spot of paint loss is at the right side near the last "A" in "Cola". Thermometer is intact and displays well with nice bright coloring. See photos. Measures 16"T x 6.5"W.

1944 Coca-Cola "Yes!" Poster Ad

Lot #2126 (Sale Order 115 of 306)

1944 Coca Cola Cardboard Sign. Depicting woman being handed a Coke by a uniformed hand, "Yes". Silhouette of north and south America in coca cola circle, the global high-sign. Overall good with dog ear corners and some scuffing. Measures 56.5" wide, 27.25" tall.

Vintage 1918 Coca-Cola Cardboard Calendar

Lot #2127 (Sale Order 116 of 306)

A very nice early, small Coca Cola cardboard calendar depicting a beautiful, well dressed woman holding the old style flared glass of Coke. In wonderful condition for the age and still has the full calendar pad. A little rust spot around staple. Otherwise very good condition. Measures 5"W x 8 3/4"T.

Vintage Large Cast Iron Gamewell Call Box

Lot #2139 (Sale Order 117 of 306)

A larger than normal type of call box with fluted stand. Both made of cast iron. The stand has the original bottom base with bolt holes. The box is empty of mechanism but does have front door lock. Top box is also missing upper back door. A very unusual call box. All original paint missing, replaced with rust. See photos. Stand is 38" x 12". Box is 42" x 15" x 10 1/2".

Kalamazoo No. 15 RR Velocipede

Lot #2140 (Sale Order 118 of 306)

A convertible double seat railroad velocipede made by the Kalamazoo Railway Supply Co. in Kalamazoo, Michigan. This car is believed to be the sole survivor. Used for track inspection. Wood and metal construction. The rider would sit on the wood seat, put his feet on pegs on the front wheel, and pump the wood T handle back and forth to propel the vehicle. An outrigger with a 3rd wheel stretched and ran on the opposite rail for stability. Comes with another seat plank. In overall good original condition, it comes with the original bill of sale and shipping information from the original owner in Myrtle, Minnesota in 1912. A photograph of the owner who was a section foreman on the Illinois Central Railroad is also included. Also included is 2 custom cut steel gears, and bearing caps. Measures 72" long, 70" wide, 38" tall.

Railway Cycle Co. Single Seat Light Inspection Car

Lot #2141 (Sale Order 119 of 306)

Extremely rare single rider bicycle light inspection car for rail inspection. Patented by Charles Teetor and mfg'd by him as the Railway Cycle Mfg. Co. of Hagerstown Indiana circa 1900. They were sold in both single and double rider versions of which both are being offered in this auction. Their purpose was for track inspectors to easily traverse their section of track. This rare single rider has original metal parts. An older restoration has replaced the rubber hand grips and pedals. There is also new rubber around the steel tires which quiets the ride on the rails. The wire spoke wheels are 20" in diameter. Fits on standard 56.5" U.S. rails. Operates like a bicycle, is chain driven, and has a hand brake. Car works as intended. Overall measures 63" long, 64" wide, 43" tall.

Railway Cycle Co. Double Light Inspection Car

Lot #2142 (Sale Order 120 of 306)

Extremely rare double bicycle light inspection car for rail inspection. Patented by Charles Teetor and mfg'd by him as the Railway Cycle Mfg. Co. of Hagerstown Indiana circa 1900. They were sold in both single and double rider versions of which both are being offered in this auction. Their purpose was for track inspectors to easily traverse their section of track. This rare double has original metal parts. An older restoration has replaced the rubber hand grips and pedals. There is also new rubber around the steel tires which quiets the ride on the rails. It even includes the metal frame, canvas sling passenger seat that hangs on the front. The wire spoke wheels are 20" in diameter. Fits on standard 56.5" U.S. rails. Operates like a bicycle, is chain driven, and has dual hand brakes. Works as intended. Overall measures 63" long, 64" wide, 43" tall.

Sheffield Telegraph RR Car

Lot #2143 (Sale Order 121 of 306)

Rare railroad telegraph velocipede car made by the Sheffield Car Co. in Three Rivers, Michigan. Used as a telegraph car. Wood and metal construction. Two riders would sit on the wood seats facing each other, put their feet on pegs, and pump the wood T handle back and forth to propel the vehicle. An outrigger with a 3rd wheel stretched and ran on the opposite rail for stability. This model also has a box attached to the outrigger to holds equipment and supplies. This one has been painted dark maroon with white stencils identifying it as a telegraph car for the C&NW Ry. Comes with a box of insulators, some wire, and insulator pegs. In overall very good condition, Measures 72" long, 70" wide, 38" tall.

Hand Pump Railroad Officials Inspection Car

Lot #2144 (Sale Order 122 of 306)

Classic pump style RR officials handcar with a passenger seat. These type of hand cars were used as track inspection vehicles. Operated by one person, it has a buckboard style wagon seat mounted on 2 elliptical springs on the front of the car. The hand car has an older restoration and is in very god condition. Wood frame on steel running gear. Wheels are 23" diameter steel. Hand brake operated by lever net to passenger seat or by foot next to operator. Fits on standard U.S. track gauge of 56.5" and works well. Overall measures 86"long, 63" wide, 50" tall

Wheel Set For A Railway Cycle

Lot #2144a (Sale Order 123 of 306)

Set of 4 wheels for a railway cycle circa 1900 made by the Teetor Railway Inspection Cycle Co. of Hagerstown, Indiana. The wheels measure 19" in diameter. There are 3 complete wheels and one wheel has the tire and the spokes with the hub present but detached. Also included are numerous small parts including chains, fittings, couplings, and more.

Lot of Misc. Rail Car Parts

Lot #2144b (Sale Order 124 of 306)

Lot consists of various parts for an older railcar including a 15.75" diameter wheel, springs, connection parts, caps, balls, and more. Wheel has surface rust as do some of the other parts. Overall fair to good usable condition. See photos for specific contents.

"American Railway Express" Wood Train Sign 6'

Lot #2145 (Sale Order 125 of 306)

A very nice original wood train sign advertising "American Railway Express Incorporated". Wood sign and trim in very good condition for age. Some flaking of black point and some flaking of gold lettering, but very legible, overall good condition. 11" tall x 71.5" wide x 1.25" deep

Adams & Westlake Kerosene Railroad Lantern

Lot #2145a (Sale Order 126 of 306)

A kerosene railroad lantern made by Adams and Westlake Company. Lantern has 2 different color lenses, orange and blue, on either side. Top is hinged to give access to the internals of the lamp and where the wick is located, wick is still present on this item. Internals are very clean with slight wear form use. Outside has some missing paint on the edges but overall, this is a very good condition lantern. See photos for more details. Measures 8"W x 16"T.

Bennet 3015 Gas Pump

Lot #2146 (Sale Order 127 of 306)

Circa 1960's Bennet gas pump. In original condition as it came offline. Has a crack in clear glass window on one side. Advertises Phillips 66 gas. Meter is loose in cabinet. OPW nozzle. Measures 50.5" tall, 24.5" wide, 20" deep.

Tokheim Gas Pump

Lot #2147 (Sale Order 128 of 306)

Circa late 1960's pump in original condition as it came offline. Advertises Texaco Sky Chief gas. Measures 47" tall, 26" wide, 13" deep.

Tokheim 52 Gas Pump

Lot #2148 (Sale Order 129 of 306)

Circa 1970 Tokheim pump in good original condition as it came offline. Advertises Shell gas. OPW nozzle. Measures 52" tall, 30" wide, 18" deep.

Tokheim 452 Gas Pump

Lot #2149 (Sale Order 130 of 306)

Circa 1960's Tokheim 452 gas pump in good original condition as it came offline. Advertises Shell gasoline. OPW nozzle. Measures 51.5" tall, 2" wide, 17.5" deep.

Map of US with 1934 License Plates from All States

Lot #2150 (Sale Order 131 of 306)

Tall rack of license plates from all of the United States in the 1934 with a large map of the US behind it. Most plates come as a pair. 94 total plates, all in state alphabetical order. Each of the 7 panels measures 96"T x 24"W for a total of 96"T x 168"W when put together. Great display piece of early American automobile history. See photos.

Large American Oil Sign On Monopole

Lot #2151 (Sale Order 132 of 306)

Vintage DSP oval sign measures 7' wide, 5' tall. Mounted in monopole frame. Chips to both sides (see pics). Has both up lights and porcelain flame bracket for the top but no flame. Square steel pole is 10' to the bottom of the oval sign bracket. No collar for base.

Large Standard Oil Sign On Monopole

Lot #2152 (Sale Order 133 of 306)

Vintage DSP oval sign measures 7' wide, 5' tall. Mounted in monopole frame. Chips to both sides which have been touched up (see pics). Has both up lights and porcelain flame bracket for the top and a repro glass flame. Square steel pole is 10' to the bottom of the oval sign bracket. Base has collar to cover bolts .

Red Crown Gas Pump Globe

Lot #2153 (Sale Order 134 of 306)

Milk glass Red Crown gas pump globe. This globe would have been placed on Standard Oil Red Crown gas pumps in the late 1920s/early 1930s. Globe does not appear to have any cracks but has worn red paint as seen in the photos. Lower part has a metal base attached to protect it from chipping. Overall good condition. Measures 17"T x 14" in diameter.

Super Shell Gas Pump Globe

Lot #2154 (Sale Order 135 of 306)

A globe for a gas pump with the center reading “Super SHELL” with the bottom reading “December 1989”. Glass pane is housed in red plastic housing and mounts with by notches in glass and pegs in housing. Only one pane present. No chips or cracks present in glass. Overall good condition. Measures 16”W x 16.5”T. See photos.

Harbie Seal Mascot Display

Lot #2155 (Sale Order 136 of 306)

Harbie the Seal was the mascot for Harbor Gasoline, a gas station chain in the LA area and Orange County. Statue is in very good condition with minimal paint wear. Measures 82"T x 44"W x 51"D.

Right Facing Large Pegasus Mobil Sign

Lot #2156 (Sale Order 137 of 306)

A large, single sided, Mobil Pegasus sign for mounting to the side of a building. Bottom of sign is marked "T-62" in white with a small label from "The Authentication Company" and is numbered "005662". Sign is in the shape of the classic Mobil Pegasus with a red primary color with white bordering and detailing. Sign has some wear to paint with some rust appearing where paint is chipped off. A very impressive display piece. Measures 92"W x 70"T x 3.25"D. See photos.

Left Facing Mobil Pegasus Single Sided Sign

Lot #2157 (Sale Order 138 of 306)

A large, single sided, Mobil Pegasus sign for mounting to the side of a building. Sign has a small label from "The Authentication Company" and is numbered "005585". Sign is in the shape of the classic Mobil Pegasus with a red primary color with white bordering and detailing. Sign has some wear to paint with some rust appearing where paint is chipped off. A very impressive display piece. Measures 92"W x 70"T x 3.25"D. See photos.

"Engine Tune-up" Lighted Sign

Lot #2158 (Sale Order 139 of 306)

"Engine Tun-up" light up sign made by Neon Products Inc. Sign lights up and displays well. Some wear on the surfaces and the label on the back but overall good condition. Measures 26.75"W x 4.375"D x 6.75"T. See photos.

Lot of 2 Vintage 5 Gallon Gas Cans

Lot #2159 (Sale Order 140 of 306)

Lot consists of a pair of 5 gallon gas cans, one marked "Shell Gasoline" in the shell logo and the other marked "Pan American". Pan American can has a pair of plaques near the spot of the can as well as having a red "Ellisco" lid. Shell can has matching lid attached to chain. Cans are in overall very good condition with minor wear to paint. Measures 22.5"T x 11.5"W. See photos. Neat display pieces.

Standard White Crown Glass Gas Pump Topper

Lot #2160 (Sale Order 141 of 306)

Standard Crown white glass topper from a gas pump. This all white top does not have any cracks or chips. Overall very good condition. See photos. Measures about 14"T x 16"W.

Bennet Model 307 Golden Shell Motor Oil Dispenser

Lot #2161 (Sale Order 142 of 306)

A Bennett Model 307 "Lubester" oil dispenser with "Golden Shell Motor Oil" painted on the side and lid. Appears to have been repainted or restored some time ago. Brass maker's tag present on spout base and is clear and legible. Minor chips to red paint. Measures 49.25"T x 23"L x 10"D. Great display piece. See photos.

Bennet Model 307 Golden Shell Motor Oil Dispenser

Lot #2161a (Sale Order 143 of 306)

A Bennett Model 307 "Lubester" oil dispenser with the "Shell" insignia painted on both sides. Appears to have been repainted or restored some time ago. Various part serial numbers are stamped into the metal on the spout and other parts. Has some paint wear, mostly on the yellow base. Red spout is in very good condition with almost no worn paint. Brass tag has been painted over however. Dip stick included. Lot also comes with an old pump from an unknown maker. Paint is heavily worn with about 50% remaining. Various rust spots on unpainted areas. See photos. Measures 49.25"T x 23"L x 10"D. Great display piece. See photos.

Vacuum Oil Co. Gargoyle Mobiloil No Parking Sign

Lot #2162 (Sale Order 144 of 306)

A metal sign and post with the sign reading “NO PARKING/Bu. of Police” on both sides in black lettering. Post’s circular base reads “Property of Vacuum Oil Company” and “Gargoyle/Logo/Mobiloil”. Sign has red paint on base with black painted post and yellow sign background. Base is rusted and lost paint with age. Sign retains majority of paint and is in overall good condition. Measures 58”T x 19.5” in diameter. See photos.

Simplex Motorcycle Frame

Lot #2163 (Sale Order 145 of 306)

Rusty frame from a Simple motorcycle. Would make a great prop or wall hanging.

Large John Deere Sign

Lot #2164 (Sale Order 146 of 306)

A large single sided metal sign with the John Deere name and logo displayed on the front. Sign is mounted to well worn wooden frame. Front of sign has some rust with one spot obscuring the last "E" in "DEERE". Sign has small label from "The Authentication Company" in bottom left corner and is numbered "005571". Back of sign has faded white stenciling reading "Bert Skaggs/Calhan, Colo" and "From Grace Sign C-/St. Louis MO.". Wooden frame has cracked and chipped boards. Measures 58.875"W x 42.25"T. See photos.

Large John Deere Sign

Lot #2165 (Sale Order 147 of 306)

A large single sided metal sign with the John Deere name and logo displayed on the front. Sign is mounted to well worn wooden frame. Front of sign has some rust with one large spot near top right corner and two spots near deer's rear legs. Sign has small label from "The Authentication Company" in bottom right corner and is numbered "005572". Back of sign has faded white stenciling reading "Bert Skaggs/Calhan, Colo" and "From Grace Sign C-/St. Louis MO.". Wooden frame has cracked and chipped boards. Measures 58.875"W x 42.25"T. See photos.

John Deere Farm Implements Sign

Lot #2165a (Sale Order 148 of 306)

Exceedingly rare 1910 era John Deere single side porcelain sign featuring the 3 leg deer. Marked on bottom right corner, VERIBRITE SIGNS CHICAGO. Sign measures 72" wide 24" tall. Overall condition is good with chips around the mounting holes and several chips on the sign face (see photos). There is one small hole under the deer antlers. This sign hung for over 50 years in a Lake County IL barn and is fresh to market.

Flxible Bus Crest Emblem

Lot #2166 (Sale Order 149 of 306)

Cast about 20 years ago from an original Flxible crest, this solid aluminum emblem is the crest that was mounted on the front of all Flxible buses during the 1940’s & 1950’s. Crest is in excellent condition. Can be polished to a mirror finish if desired. The following photos after the actual crest are some pictures of buses with similar crests for a sense of scale. Measures 29 1/4" W x 10 1/4" T.

Pair of Vintage Buggy Lanterns

Lot #2167 (Sale Order 150 of 306)

Pair of 2 small buggy or carriage lanterns, made by Dietz Eureka . Both lanterns appear to be the same model and have a mounting bracket on the left side, one of which has a screw. Both also include canvas wicks inside. Back side of each lantern has a red color lens while the front is clear. One of the lanterns has a cleaner front lens and displays better. Both could use some cleaning but are in overall good condition with some wear and paint loss throughout. See photos. Each measures 7.5"W x 4.25"T.

1957 Hudson Hornet

Lot #2169 (Sale Order 151 of 306)

NOTE: FIRST 12 PHOTOS REFLECT CAR'S CURRENT CONDITION!!!! An original 1957 Hudson Hornet 4 door sedan that looks to have all the original molding, emblems, trim, and hub caps. Tires are in fair condition and holding air. All exterior chrome is in fair to good condition with only some light surface rust specks. Engine has a small block V-8 that was rebuilt in 2008. Automatic transmission at this time only shifts into reverse. Other mechanical work might be needed as the car has been unused for some time. A few parts such as rocker sill plates and wiper arms are in trunk. All light lenses look to be in good condition. All glass looks to be in good condition except for crack in drivers door glass. Inside trunk area and passenger area flooring is solid with some surface rust. No obvious rust through inside or exterior as the vehicle seems solid. Exterior paint is faded and has some surface rust throughout. The car has the unique 1950's fins and an unusual look to it that is becoming more sought after by all automotive enthusiasts. This could be Doc Hudsons son, would have to find Mater and ask him. Has new master cylinder and booster. Has 327 motor. MILEAGE: 124,336 VIN Y13698 See photos.

1975 V.W. Bugatti Model 35B Racing Speedster

Lot #2170 (Sale Order 152 of 306)

The vehicle is powered by a 1600 Volkswagen 4 cylinder, air cooled engine with a manual transmission. Dual exhaust, new battery, fuel pump and fuel filter just installed. Tan leather interior near perfect along with the cab tonneau cover. Cab has carpet, gauges, and wood trim steering wheel. Some loose wires under dash believed to be for radio which is missing. Exterior paint is done in Ferrari style red and is in good condition. No dents or cracks. This car has the optional dual racing windshield, leather hold down straps for hood, and side mount spare tire. Car runs and drives nice and is quite the attention getter.

1880 English Bath Chair Invalid Carriage

Lot #2171 (Sale Order 153 of 306)

A single person "bath chair" invalid carriage made by the English company W. Monk & Company. Bath chairs were single person light carriages with folding hoods and were invented by James Heath. Their name is derived from the location they were created, Bath, England. They were used by wealthy elderly or invalid individuals to be pushed by a servant and steered by the person in the carriage. Carriage has four wheels with pivoting front wheels and a handle for steering. Carriage has folding hood for protection from sun and rain as well as a folding windshield. Lever on left side is a handbrake for the rear wheels. Green pinstriping present on frame and body of carriage. Back of carriage is fitted with a turned wood push handle. The front dumb irons run from the underside of the front of the body and are fitted to elliptic springs mounted to the front axle. In the middle of the fore carriage is a pin which secures the iron bracket to which the shafts are fitted to. Wooden flip up windshield panel has brass tag reading "W. Monk & Co./Late / J. Heath/Makers To Her Late Majesty / Broad Street BATH No. 3712". Interior is tattered and worn. Hood has some separation from bottom rung with some minor tears. Steering still works as intended and wheels rotate without issue. Green painted body retains majority of paint. Some rust present but carriage is in overall in good condition for its age. Measures 82"L x 39.75"W x 71"T. See photos.

2001 Harley FLHTCUI Electra Glide Touring Bike

Lot #2172 (Sale Order 154 of 306)

3184 miles. $4700 in accessories including Electra Glo light rails, adjustable back rest, caliper/rotor cover and too much more to list. Excellent condition. All original paint.

Harley Davidson Work Bench

Lot #2173 (Sale Order 155 of 306)

Made by Lincoln in the 1940s/1950s, this is an amazingly restored work bench with a Harley Davidson theme. Front on the top and lower section have the Lincoln marking and plate that do not appear to have been restored like the rest of the bench. 4 foot wide work table sits atop 2 cabinets and comes with a roll top door that allows for safer storage on the back board. Cabinets come with a single shelf. Surrounding the work table are 2 cabinets, left one has no shelves while the right has 3. Both doors have a tab to allow for locks to keep your tools safe. Overall, an excellent work bench set, perfect for any Harley Davidson collector or rider. Measures 100"W x 60"T x 26"D.

Restored "Koken" Round Seat Barber Chair

Lot #2174 (Sale Order 156 of 306)

Beautifully restored barber chair made by The Koken Barber Supply Co., restored in the Harley Davidson motif. Hand painted pinstriping, black leather-style seat covering with large motorcycle-style buttons headrest, and Harley Davidson material patches. Refinished in high quality automotive finish, overall in very good condition. A must for the Harley Davidson rider home or mancave. 47" high x 27" wide x 44" deep. See photos.

Harley D. Restored "Berninghaus" Barber Chair

Lot #2175 (Sale Order 157 of 306)

Rare and beautifully restored barber chair manufactured by The Berninghaus Supply Co., restored in Harley Davidson motif. Original porcelain chair professionally finished in high grade automotive finish. Hand pinstriped, black leather-style seat covering trimmed with large chrome buttons original headrest, material Harley Davidson patches, very unique fluted base. Again, a must for the Harley Davidson rider home or mancave. Overall in very good condition. 47" high x 27" wide x 44" deep. See photos.

Honda C50 Moped

Lot #2176 (Sale Order 158 of 306)

A nice Honda 50cc moped that was imported to DeKalb Illinois some time in the mid 1970's. Includes the old Illinois licenses plates from 1976. Exhaust pipe has some rust near the end. 1429 miles according to odometer. Rust patches on the back half near engine and on rear wheel cover. Front is clean with no major rust patches. Room for 2 with foot rests for the passenger for extra comfort. Side of engine reads 0.6L. Mirrors and light covers are crack free. Could use a good wash but makes a great gift for people who wish to travel short distances in the city or on a college campus. See photos for more details of the condition. Engine will not kick over, piston frozen in place. Been in a garage since 1976.

Bike Motor

Lot #2177 (Sale Order 159 of 306)

This is an old Travis Bike Motor. Made in the early 1950's in Chicago. Clamped to the front fork of a bicycle and driving the front wheel with a roller on tire it produced 1.5 HP. What you see in photos is what you get. Looks like it is missing muffler and air filter. Spark plug is missing. Turns over freely.

1930 2 Door Chevy Coupe w/ After Market Pickup Bed

Lot #2178 (Sale Order 160 of 306)

This is a rare and an unusual set up. This would be a great advertising piece. The car/truck is fairly complete with the rear spare tire carrier, solid wheels, new exhaust system in bed plus other parts. The vehicle has good glass, bumpers, and a front sun visor. The interior looks fairly complete with the door handles, wood steering wheel, seat frames, etc. Has the original 6 cylinder engine in not running condition. Vehicle needs total restoration. Please see photos of this unusual car/pickup. The rear trunk lid was originally removed and this pickup bed set up was bought from the dealer and installed into the trunk opening. Pretty unique and functional in its day. No title.

1930 Chevrolet 2 Door Sedan

Lot #2179 (Sale Order 161 of 306)

This vehicle is fairly solid for its age. Needs some of the body cab wood replaced along with some roof bows. The six cylinder motor is there and looks complete but not running. Has all the glass except drivers door. All seat frames are there. Has the usual wear of a vehicle this age but is worthy of a complete restoration. Please see photos. No title.

1990 Buick Reatta Convertible

Lot #2180 (Sale Order 162 of 306)

These vehicles were the top of the line for Buick sports cars. They had every option conceivable at that time, down to non-rusting plastic fenders. The convertible top has some damage and is missing read window. Everything looks complete under the hood but car is not running. Needs a battery. Owner states it did run when put in storage years ago. There is no major damage on exterior besides some very minor scuffs and light scratches. No dents and no rust. All glass is good besides top rear and a windshield wiper scuff. Tires have tread and hold air but are old. Vehicle does not run so electrical items cannot be tested, along with mileage unknown. This car has been in storage for years and the owner states that it ran when put into storage. Interior in good condition. The carpet piece for drivers door is in back of car. Overall a solid car that needs some TLC.

1989 Buick Reatta 2 Door

Lot #2181 (Sale Order 163 of 306)

The car was Buick's luxury, loaded sports vehicle in the day. Everything was electric and had full leather interior. The car also has an optional power sun roof. They came stock with a fuel injected V6 engine, automatic transmission, and non-rusting plastic fenders. The original mag wheels have tires with good tread, that hold air but are old. Has good glass all around with a scuff mark on left of windshield. Looks to have original paint, in good condition, with just a few scratches. No dents or rust, solid body. Under hood looks complete but needs battery and is not in running condition. Mileage unknown. Vehicle interior is in fair to good condition. Missing a carpet piece on lower right door. These cars have a following and are sought after. Vehicle overall is in fair condition and just needs a little TLC. Vehicle has title.

1993 Ford Escort

Lot #2181a (Sale Order 164 of 306)

50,250 miles Excellent condition, no accidents, one owner car. Runs and drives well. Clean Illinois title.

1930 Model A Ford 4 Door Sedan

Lot #2182 (Sale Order 165 of 306)

The car has had an older restoration. No dents or rust blisters, only some minor surface rust. The only damage we see is the right front fender has about 4 inch tear front outside-in. Not a hard repair. The undercarriage was restored at one time and is painted and clean. Wire wheels look good with good tires. Canvas top is good. The 4 cylinder motor looks good and runs like it was also gone through. All four doors open and shut with a good fit. All interior wood that was bad has been replaced. All the door latches and window mechanisms were gone through and work good. Wood flooring is solid. To make the interior a 100% would take new seat material and all the interior panels (see photos). Overall a very solid, good running, driving vehicle. Has title.

Ford Model A Engine

Lot #2183 (Sale Order 166 of 306)

Ford Model A engine that came from a local barn. Good for parts or rebuilding. Sold as is.

Original 1930 Chevy Front Fenders

Lot #2184 (Sale Order 167 of 306)

These 2 front fenders, left and right, came with the 2 1930 Chevys that are in this auction. They are both in good condition with some surface rust (see pics). Great for your restoration project.

1930 Ford Model A Pickup Truck

Lot #2185 (Sale Order 168 of 306)

Vehicle has title. This is a good, solid truck with an older repaint. The truck has a good, solid rear box and bed floor. The tail gate is good but has a slight bow. Also has side mount spare and wire wheels all around. All glass looks good except cab rear window has buttel mark in center. The front windshield tilts out. Tires hold air and have tread but are old. Turn signals have been added along with a custom bed rack for hauling larger items. The four cylinder motor looks complete and is running. Owner states it ran when stored years ago. The interior looks fair but is missing some minor trim. Overall a solid little truck worthy of restoration or drive as is. Video of truck running can be seen in this link: https://youtu.be/tecbhJFq5V8

1956 Ford Thunderbird Roadster w/ Continental Kit

Lot #2186 (Sale Order 169 of 306)

A very solid body and frame. The car was refinished years ago and has some checking, cracking, and light rust coming through finish. Hard to tell if any body work was done at that time but the door edge bottoms are solid, hood edge is solid along with trunk edge. Cab floor is solid along with trunk. The car is missing the rear quarter skirts but the skirt mounting brackets are there and solid. All the exterior trim, emblems, bezels, wheel covers, lenses, etc. Bumpers and bumper guards are solid. Chrome is fair to good with some surface rust. All interior trim, hardware, dash knobs, mirror, sun visors and original radio (not tested). Under the hood id original V8 engine, automatic transmission with floor shifter. It is a 12 volt electrical system. Power steering and even the original air cleaner (that is usually missing). Interior is fair to good, could use some cleaning. Door panels are warped. Vehicle comes with hard and soft tops. Vehicle has good glass all around with a few scuff marks on front windshield corners. Still has both window air deflectors. The frame looks solid with some rust proofing still present. and some rust where rust proofing is missing. Engine runs but has some fuel problems from sitting in barn for many years. Tires hold air, fair tread but are old. A good candidate to restore or drive as is.

Full Set '78 Ford Thunderbird Hubcaps

Lot #2186a (Sale Order 170 of 306)

A full set of hubcaps for a 1978 Ford Thunderbird. Each hubcap is marked "Thunderbird" in the center and 3 of the 4 have the original tags on the back side. All have some wear from use but are in good condition. A quick cleaning and they would look great on your Thunderbird! Measures 16.5" in diameter.

1941 Ford Custom Street Rod

Lot #2187 (Sale Order 171 of 306)

1941 Ford Custom Street Rod, Not sure where to start on this vehicle because there is almost too much custom work to list, to start, it was built by Larry Purcell, a well known custom shop, the original Ford frame has been narrowed in rear, hand made front cross member, wheel base shortened and narrowed, disc brakes added, along with many other small modifications, the body includes the top chopped and shortened, hood sectioned, shortened, doors shortened, quarter windows shortened, deck lid shortened, rear fenders shortened, narrowed, front of hood and fenders lowered, doors and body extended down, doors and deck lid corners have been rounded, lower door hinges are hidden, one piece door glass manufactured, fenders and hood molded into one piece along with grille, headlights frenched, the whole front now opens forward, custom hidden door latches with emergency releases inside, along with trunk release, paint is like glass, the engine is a Ford 351 cubic inch with a C-4 transmission, there is so much more to list, custom steering wheel, dash, seat, tilt column, the headliner alone was almost $4000! And the list goes on and on, there is a list of all that was done along with detailed pictures from start to finish. 57" x 168" x 60"

1968 Mercedes Benz 250 SL

Lot #2188 (Sale Order 172 of 306)

Miles on speedometer approximately 75,500. Car has older restoration with complete repaint. Body is straight with no dents. Paint looks good with no flaking or rust bubbles coming through. Bumpers and chrome trim in fair to good. Vehicle has straight 6 cylinder, fuel injected, power steering, power brakes, 12 volt electrical system, automatic transmission with floor shifter. Shifting linkage has been disconnected. Engine not running but was when put into storage over 15 years ago. Interior looks complete and in fair condition. Carpet has some fraying along rocker sill plates. Drivers seat has small tear. Lower door edges, trunk edge, and hood edge are solid and show no signs of rust swelling. Overall the vehicle is in fair to good condition.

Early Motorized Schwinn Men's Bicycle

Lot #2189 (Sale Order 173 of 306)

Looks to be in the 1960's men's Schwinn Bicycle with newer reflective pedals, older swing down stand, rear leather tool bag, newer Sting Ray speedometer complete, reflective back mirror, newer high rise handle bars, a sixties-style spring seat, and the best of all a gasoline powered front mount engine complete with fuel tank, throttle, exhaust and momentum control lever. The bike looks like it's ready to ride with 1.2 HP and no rust. Includes owner's manual. See photos.

1968 BSA Chopper Motorcycle

Lot #2190 (Sale Order 174 of 306)

This motorcycle last ran 10 years ago. Shouldn't take much to get her up and running again. Large dent in the gas tank. See photos. Otherwise, in overall nice condition. Comes with the old tanks, fork and fender from before its conversion.

Antique Horse Drawn Utility Wagon Restored

Lot #2191 (Sale Order 175 of 306)

The wagon was taken apart, some wood replaced, parts painted and put back together. Refinishing in John Deere style green and yellow with pinstriping. The wheels are heavy metal clad wood spoke and rear wheels are 52" high. Front wheels are 35" high. The whole restoration was professionally done and in good working condition. Total height to top of seat 86", box length 148" and tongue are 116".

Rare 1880's Horse-Drawn 2 Seat Reindeer Sleigh

Lot #2192 (Sale Order 176 of 306)

The "Sleigh Craze" in the United States reached it's peak in the 1880's with an average of 150,000 sleighs being built each year. Frank Miller received a patent on Aug 15, 1851 for his "Reindeer Cutter" which he sold as a parts kit to small sleigh building shops for $5.00. One of these sleighs is featured in the March 2011 issue of, The Carriage Journal, winning the People's Choice Award at the Carriage Association of America Winter Conference held in Minneapolis, Minn. It states that, "there are only 3 known to exist." Whether this is one of the 3 or a fourth one that has surfaced we do not know. It is a true "One Horse Open Sleigh" sometimes referred to as a cutter. Seats two. What is unusual to this sleigh is that the sides are wood cut outs of deer with metal antlers. In very good condition with older restoration. Seat and back have been done in a button and tufted burgundy fabric. The seat has a dime size hole in it. Comes with a vintage lap robe. No shafts included. Measures6'-6" long, 48" wide, 47" tall.

Model Steam Traction Engine

Lot #2193 (Sale Order 177 of 306)

A well built model steam traction engine made of iron with 4 wheels for movement, a smokestack, the alcohol burner with wick, and a crankshaft on top with two wheels to belt to for powering other devices. Top of engine has a pressure gauge measured in kg/cm^2. Steam engine appears unmarked and has some rust and oxidation on exterior. Front axle pivots for steering with steering chain mechanism absent. Wheels rotate freely. Unknown maker. Alcohol burner is rusty and the bottom is dented. Engine is untested. Vintage unknown. Measures 31"L x 11.5"W x 20"T. See photos.

Keeney Bonus Super Bell Slot Machine

Lot #2195 (Sale Order 178 of 306)

Circa 1940 by J.H. Kenney Co. Chicago, IL. Operates on 5 cents. All original electro mechanical mechanism works well but should be shopped. Cabinet in good condition with some paint loss. Back and top glass in good+ condition with very minor flaking. Comes with keys. Measures 55"T x 31"W x 23"D.

Mills 5 Cent "QT" Slot Machine

Lot #2196 (Sale Order 179 of 306)

Nice older restoration 5 Cent Mills QT slot machine. Working, with key. 13.5" x 12.5" x 18".

Mills 25 Cent Bandito Standing Slot Machine

Lot #2197 (Sale Order 180 of 306)

This is one of Bill Harris' western figures, "The Mexican Bandito". These figures were all hand carved and painted. The bandito is dressed in authentic hat, boots w/ spurs, holster jet w/ guns. This figure was restored years ago, before 1984, with older appraisal. These very seldom come up for sale and are the highlights of any collection. Overall good condition. Measures 75" x 24".

Polk Carved Slot Machine Figure

Lot #2197a (Sale Order 181 of 306)

This is believed to be an unfinished set of wood carvings for a Frank Polk slot machine figure. Completeness is unknown. Please bid accordingly based on photos attached. Parts consist of legs, head, the back of the shoulders, an arm. Parts are unfinished with the arm and unknown part still having knobs/blocks on the ends for holding the piece. Bottom of one shoe is marked "Frank Polk". No finish present on pieces. The arm and unknown part have some small cracks in the wood. Wood is slightly dirty. Tallest leg measures 37.5"T. See photos.

Mills 5 Cent Slot Machine with Black Bart Figure

Lot #2198 (Sale Order 182 of 306)

A contemporary Bill Harris remake of the famous western character slot machine figures. This is a reconstruction composite of "Black Bart the Bank Robber". Inserted is a mills high top 5 cent slot machine. Looks to be original with back door and key. The figure looks very authentic with hat, bandana, holster and guns. The figure's base is a large casting of a buffalo nickel. A very desirable slot machine that seldom comes up for sale. Overall good condition. Measures 72" x 23".

Mills 5 Cent F.O.K. Dual Mint Vendor Slot Machine

Lot #2199 (Sale Order 183 of 306)

Good working condition, older restoration, working with keys.

Mills 5 Cent Castle Front Slot w/Side Vendor

Lot #2200 (Sale Order 184 of 306)

Good working condition, unrestored, chip on top casting on left hand side, mint vendor works. Also has the Token Award feature.

Mills 5 Cent Castle Front Slot Machine

Lot #2201 (Sale Order 185 of 306)

Mill's Castle Front .05 cent Slot Machine with Gold Award Feature. Good condition, with keys, working.

Callie 5 Cent Superior Bros Slot Machine

Lot #2202 (Sale Order 186 of 306)

Restored, good condition, working, with keys.

Watling 5 Cent Blue Seal Dbl Mint Vendor Slot

Lot #2203 (Sale Order 187 of 306)

No keys, Mech jammed, good condition, restored.

Mills 50 Cent Film Stars Slot Machine

Lot #2204 (Sale Order 188 of 306)

1 reel, pays out on favorite winning movie star, working condition, very good condition with keys.

Watling 1 Cent Double Gumball Vendor Slot Machine

Lot #2205 (Sale Order 189 of 306)

Watling Double Gumball Vendor 1 cent Slot Machine. Unrestored, working condition, with keys.

Rol-A-Top 25 Cent Slot Machine

Lot #2206 (Sale Order 190 of 306)

Working condition with keys, back bonnet is a replacement, few other replaced parts.

Mills 5 Cent Poinsettia Slot Machine w/Side Vendor

Lot #2207 (Sale Order 191 of 306)

Working with keys, good condition, unrestored.

Bradshaw 25 Cent Little Stockbroker Slot Machine

Lot #2208 (Sale Order 192 of 306)

Beautifully restored "G. Bradshaw's" Little Stockbroker machine. These are extremely rare and seldom come up for sale. Refinished in jet black with highlighted embossed lettering and pinstriped in red and gold. Overall very good condition. Measures 20.5" x 11" x 25.5".

Jennings/Pace 5 Cent Slot Machine

Lot #2209 (Sale Order 193 of 306)

Good condition, working, no keys, back door is unlocked.

Oak Slot Machine Base

Lot #2210 (Sale Order 194 of 306)

Oak slot machine cabinet base with an owl decal on the front. Inside has 1 shelf. Feet, handle, hinges and other metal bits are bright and shinny. Surface has a few marks from having a machine on top. Small pin hole on one of the sides in the rear. Overall, very good condition. Makes a great display piece for coin operated machines. Measures 17"W x 17"D x 33.5"T.

Mills 5 Cent Bell-O-Matic Slot Machine

Lot #2211 (Sale Order 195 of 306)

4 Reels, good working condition, needs to be rewired for lights, with keys, working.

Mills 5 Cent F.O.K. Mint Vendor Slot Machine

Lot #2212 (Sale Order 196 of 306)

Mills 5 Cent F.O.K. Mint Vendor Slot Machine, good working condition, older restoration.

Pace 1 Cent Comet Slot Machine

Lot #2213 (Sale Order 197 of 306)

Good condition, no keys, free playing.

Mills 5 Cent Watermelon Slot Machine

Lot #2214 (Sale Order 198 of 306)

All original Mills 5 cent Watermelon in good condition. Plays and pays. Expected wear on paint. No lock for back door. Wood base needs repair. a piece of oak has been cut for the base but needs to be glued and finished.

Mills 25 Cent Horse Head Slot Machine

Lot #2215 (Sale Order 199 of 306)

Nice older restoration 25 cent Mills Horse Head. Plays strong. Includes original Mills lock and keys.

Contemporary Oak Cabinet / Slot Machine Stand

Lot #2216 (Sale Order 200 of 306)

Oak cabinet slot machine stand with leaded glass door and brass medallion insert. Overall good condition with a few scuffs and light scratches. Door has lock and key. 30.5" x 17.5" x 17.5".

Jennings 5 Cent 1941 Silver Moon Chief Slot

Lot #2217 (Sale Order 201 of 306)

A 1941 5 cent Silver Moon Chief slot machine manufactured by O.D. Jennings and Co. A very nice original machine with a front jack pot, with the original back door. Has key and mounts in the top of a vintage custom metal stand. Good working condition. A very attractive combination. Measures 63”T x 16.5”W x 17”D.

Jennings 5 Cent Standard Chief Slot Machine

Lot #2218 (Sale Order 202 of 306)

All original 5 cent machine circa 1946 by O.D. Jennings of Chicago IL. Accepts coins and plays well. In overall good condition. Original cash box and back door with replacement keys.

Contemporary Oak Cabinet / Slot Machine Stand

Lot #2219 (Sale Order 203 of 306)

Oak cabinet with paneled door, lock and key, and Indian medallion. Cabinet sits on four painted claw feet. Overall good condition with a few light scuffs and scratches. Includes one inside shelf. Measures 19" x 19" x 33.5".

Jennings 5 Cent Chief Slot Machine on Stand

Lot #2220 (Sale Order 204 of 306)

Cabinet style very similar to the Victory Chief machine produced during WW II but with a shooting star and eagle theme. Original paint, coin box, and keys. 5 cents, plays smooth. Comes with metal slide in base cabinet.

Mills 25 Cent War Eagle Slot Machine

Lot #2221 (Sale Order 205 of 306)

25 cent Mills War Eagle in original condition. Accepts coins, plays slow, pays out. Replacement lock and key. Ready for restoration.

Mills 5 Cent Watermelon Slot Machine

Lot #2222 (Sale Order 206 of 306)

Nickel machine in very nice original condition. Accepts coins and plays well. Some paint chips to the back of the bonnet and expected wear on the front. Back door currently open, lock has no key.

Jennings 5 Cent Chief Slot Machine

Lot #2223 (Sale Order 207 of 306)

Old original 5 cent machine currently on free play. Machine plays strong. Needs parts for the coin acceptor, no lock on back door.

Mills 10 Cent Castle Front Slot Machine

Lot #2224 (Sale Order 208 of 306)

10 cent mills castle front in fair original condition. Accepts dimes and plays slow, mech needs servicing. Casting on back of bonnet broken. No lock on back door. Wood base has split and pieces missing. A great candidate for restoration.

Mills 10 Cent Novelty Trade Stimulator Slot

Lot #2224a (Sale Order 209 of 306)

"The Elk" slot machine made by Mills Novelty Company with instructions in French. The user would drop a dime into one of 3 lots and pull the lever. Depending on what color they picked and if the wheel landed on it, the user would be awarded a prize. This machine has the name "The Elk" on the top as well as a depiction of an elk on the front and camping on the sides. The machine has a nice golden color over the metal surfaces and the top instructions are uniquely written in French. Back door has a lock and key although do not appear to be original to the machine as the back door lock does not seem to fit. A nice slot machine. See photos. Measures 12.5"W x 11.5"D x 19"T.

Mills 10 Cent Black Cherry Slot Machine

Lot #2225 (Sale Order 210 of 306)

Nice all original 10 cent machine came from a bar on the Illinois side of the Mississippi River. Plays well. Good original finish with some chips on the cherries and scratches on the award plate. Has original key and cash box.

Jennings 5 Cent 1937 Dixie Bell Co. 700 Slot

Lot #2226 (Sale Order 211 of 306)

An original Dixie Bell slot machine, 5 cents, manufactured by O.D. Jenning and Co. Has front jack pot, original back door, missing front glass that covers the 3 reels. Has normal wear, missing some paint throughout, no cracks or breaks that are noticeable. Works well, has key. Overall good condition. Measures 26”T x 16.5”W x 16.5”D.

Watling 5 Cent Roll-a-Top Castle Front Slot

Lot #2227 (Sale Order 212 of 306)

Original 5 CentWatling Roll-a-Top Castle Front model post war slot machine. Original except possibly back door. Machine works, wheels are a little sticky from sitting. Some normal wear, scuffs and scratches. A sought after machine in good condition. See photos. Keys included. 24" x 16" x 15".

Mills 10 Cent Hi-Top Slot Machine

Lot #2228 (Sale Order 213 of 306)

An original 10 Cent Mills Hi Top slot machine. Original back door. Was told by owner to be complete with some coins inside and is working. Looks to be in fair to good condition with no cracks in castings or glass. No key to back door. Measures 26" x 17" x 15".

Star Bell 10 Cent “Waitress” Slot Machine

Lot #2229 (Sale Order 214 of 306)

The famous “Cocktail Waitress” has a three reel pace 10 cent slot machine made by her sided with her inciting you to come and play. This blonde beauty stands solidly on an aluminum base. Machine has normal wear with a few paint flakes, light scuffs, and light scratches. Machine works well but is missing a back metal door to slot. Overall good condition. Measures 69”T x 30”W x 21”D.

Fiberglass Molds for Cocktail Waitress Slot

Lot #2229a (Sale Order 215 of 306)

4 fiberglass molds necessary to produce the body parts for the cocktail waitress character slot machine, which can be built around your choice of slot. Comes with tub of costume accessories for the waitress.

Mills Elk Saloon Trade Stimulator

Lot #2230 (Sale Order 216 of 306)

Nice all original Elk trade stimulator by Mills Novelty of Chicago, IL circa 1905. Pays off in tokens for cigars or drinks. Original finish copper oxidized finish case in very good condition with the mills owl emblems having been repainted in red. Original marquee, instruction / reward cards, and lock and key. Glass on rewards card window has a crack. accepts 5 coins and plays well. Measures 12.5" tall, 14" wide, .5" deep. Add 6" to height for marquee.

Uncle Sam Paupa & Hochreim Slot Machine

Lot #2231 (Sale Order 217 of 306)

Uncle Sam counter top “wheel” slot machine made by Paupa & Hochreim, Chicago, Illinois circa 1899. Play up to 5 nickels. Solid wood cabinet has been refinished and external parts re plated. The cabinet has a vertical crack above the pay out chute and the lock has been replaced with no key available. The internal mechanism is in untouched original condition with the exception of the paper wheel which has been re backed for strength. Accepts coins and plays well. To say this machine is rare is an understatement with only a few being known. Measures 24” tall, 22.5” wide, 11” deep

Three-Reel 1 Cent Trade Stimulator Ball Gum Vendor

Lot #2238 (Sale Order 218 of 306)

All aluminum decorative case with original back door. Looks to be original paint with direction and payout cards. No cracks or breaks. Works very well with penny and in very good condition. 12.5" high x 11.5" wide x 8.5" deep. No key. See photos.

Three-Reel 1 Cent "Suds" Trade Stimulator

Lot #2239 (Sale Order 219 of 306)

A rare all aluminum very decorative case, looks to be original except for back door, red, white and blue stars and stripes motif. Works well with penny. No cracks or breaks and in very good condition. 11.25" high x 9.5" wide x 9.5" deep. See photos.

1902 Mills Dewey 5 Cent Jackpot Slot Machine

Lot #2240 (Sale Order 220 of 306)

The popularity of the victorious U.S. Navy hero of the Spanish-American War, Admiral George Dewey, prompted the Mills Novelty Co. of Chicago to produce the Dewey upright slot machine series. The Dewey was a favorite with customers from its 1899 debut and continued to appear in locations until the 1930’s. Operators appreciated the machine's reliability and large earning capacity. This Jackpot model was produced in 1902 and features a "bonus jackpot" released by landing on one of 2 blue spots on the wheel. This machine has an older refinish to the oak cabinet and a replaced art glass. The plating on the cabinet hardware and cast paw foot legs is original and worn which gives the machine a very original look and feel. The mechanism is original with some replaced screws. It is 5 cent operation and plays very strong. Original back doors and locks with one original Mills key. Measures 66” tall, 28” wide, 17” deep

Vintage Cast Iron Flip Card Poker Machine

Lot #2241 (Sale Order 221 of 306)

A cast iron flip card machine flipping 5 cards to create a poker hand. Machine is operated by pushing bar on right side all the way down and releasing it. Machine has glass panel for viewing hand and small instruction panel below viewing window. Case is made of cast iron with bottom panel on base absent allowing access to interior. Some minor surface rust present on bottom of case and interior. Cards have some staining as well as some fading or torn cards. Machine still works when pressing down bar. Cast iron case has a dull brown patina with age. Measures 8.625"T x 12"W x 8.5"D. See photos.

Caille Brothers 5 Cent Slot Machine

Lot #2242 (Sale Order 222 of 306)

Antique "Caille Brothers" Nickel Slot Machine "Ben Hur Roulette" is a rare counter top early slot machine in very good and looks to be original condition. Just a few light nicks and scratches. Looks clean and original inside with coin box. This one has the top marquee (which is usually missing). Overall very good condition. Don't miss out on this one, hard to find. Keys included. 22" high x 16" wide x 11.5" deep. See photos.

European Caille Ben Hur Counter Machine

Lot #2242a (Sale Order 223 of 306)

European Ben Hur coin op machine. The Ben Hur counter machine was a roulette-style machine made from 1908-1932 named after the popular book Ben Hur. At the time, this was the smallest machine of its style being able to be placed on counter tops. This model is the European version which takes larger coins such as a halfpenny or US half dollar coin instead of the nickel like the US versions. Thought to have been made in 1928-1932. Machine is in need of restoration to function properly, few dents and scratches on the wood surface, wood finish is worn in some areas. The number “72” is in red coloring on the inside. Includes key. See photos.

Caille Bros. Machine Stand

Lot #2243 (Sale Order 224 of 306)

Listed in the Caille catalog as Machine pedestal No. 1. Base is painted cast iron, column is painted to simulate marble, top capitol is nickeled cast iron. In restored condition. Measures 34.5" tall.

Vintage Chuck-A-Luck Dice Cage

Lot #2244 (Sale Order 225 of 306)

The Chuck A Luck or birdcage as it was sometimes called, was a casino game where players would bet on the outcome of 3 dice being rolled inside the cage by the dealer. Cage has some rust on the base and cage rims. Handle turns easily and spins the cage. Side of the support has a bell. Comes with 3 red dice. See photos. Measures 17.5" tall and 15.5" wide from the handle to bell.

Keno Wood Gambling Goose

Lot #2245 (Sale Order 226 of 306)

Vintage mahogany Keno gambling game that was used in the 1800's. Comes with a variety of numbered semi circles with numbers on the bottom. Tumbler is in very good condition with a few nicks here and there but finish is clean and in working condition. Some of the numbers are faded from use. Measures 16.5" in diameter x 23"T.

Evans Big Six Wheel

Lot #2246 (Sale Order 227 of 306)

Nice wooden gambling wheel marked H C Evans & Co of Chicago Illinois on the front. The game was played where the player would bet on the possible outcomes of the dice and would win depending on how many of the three they got correct. In the H C Evans & Co version, there are 54 segments that the user could bet on with some being duplicates. Each segment is in between 2 metal pegs that the rubber stopper would fit inside of to indicate the winning numbers. 6 of these segments are combined to be covered with glass for a nice detail. The wheel itself is in excellent condition with some edge wear on the sides and rear. The wheel is attached to a pole mounted on 3 cast iron legs. Pole paint is worn but still retains 85%+ of the original color. Overall, this is a great example of a Big Six Wheel game that would fit in any collection. Measures 5 feet in diameter and 7.5 feet tall.

Fairest Wheel Trade Stimulator

Lot #2246a (Sale Order 228 of 306)

A nice original piece ready for restoration. It looks like someone attempted a half-assed job who didn't know what they were doing. The parts seem to be all there including the wheel cliicker with the exception on the coin box. Oak construction. Base stamped Pat. May 7, 1895 Measures 21.5"T x 14"W. See photos.

Professional "Evans" Gaming Roulette Wheel & Table

Lot #2247 (Sale Order 229 of 306)

Vintage Professional Roulette Wheel and Table with beautiful wood inlay throughout and adorned with an angel centerpiece. Wheel spins very smoothly, like it should. The wheel sits in a quarter sawn oak paneled table with egg and dart wood trim, cast metal winged angel, copper flashed claw fest on each corner. A few veneer cracks on center wheel, but overall in good condition. Would make a great unique coffee table people would talk about and have fun. With center spindle: 30" high x 41" wide x 41" deep. See photos.

Oak Homemade Gambling Wheel on Stand

Lot #2248 (Sale Order 230 of 306)

Handmade 33.5" in diameter gambling wheel. Appears to be made from a bike tire with wood boards wrapped around and metal pegs implanted in the wood. The stopper is a hard piece of leather that is made to be stiff but has some flexibility. Wheel rotates as it should. Used in old saloons or gold mining camps. Originally from California. Great for any gambling machine collector. Measures 82"T x 33.5" in diameter.

Hooter's Casino Money Wheel

Lot #2248a (Sale Order 231 of 306)

The Hooter's Casino operated in Las Vegas from 2006-2019. It is now the OY Hotel & Casino. This is the Big Six style custom made money wheel from the casino. The wheel itself measures On its custom made stand it measures 8'-4" tall. The wheel can be removed from the stand. The wheel features facsimile U.S. currency. Wheel spins freely. In overall very good condition.

Victorian-Style Gambling Black Jack Table

Lot #2249 (Sale Order 232 of 306)

This has to be the fanciest custom built gambling table in existence. The base is all quarter sawn oak in multi levels. Paneled on sides and front. Ball and stick style fretwork on both back corners and lower front center. Two ornate corbels on front panel with almost every edge trimmed in either rope wood molding or ball style molding, surrounded by an oak foot rail, all this setting on four cast metal claw feet. And has chip rack full of chips. A few chips off the top table edge and small piece of molding missing, overall in good condition. 40" high x 65.5" wide x 35" deep. See photos.

Vintage Professional Gaming Roulette Table

Lot #2250 (Sale Order 233 of 306)

Vintage Professional Roulette Table with felt table covering, side extension for chip rack, a wood wheel with beautiful wood inlay throughout. Wheel spins very smoothly like it should. Heavy duty base. Overall in very good condition. 43" high x 96" wide x 58.5" deep. See photos.

Small Cowper Mfg. Co Roulette Wheel

Lot #2251 (Sale Order 234 of 306)

Small table top roulette wheel made by The Cowper Mfg. Co of Chicago Illinois. Wheel is missing some dividers between the numbers and the center shaft has a few rust spots but spins perfectly and the wooden finish gives this wheel a nice glossy color. Perfect addition to any gambling machine collection. Measures 21" in diameter.

Wurlitzer 780 Jukebox

Lot #2253 (Sale Order 235 of 306)

1941, Paul Fuller design, 78 rpm, 24 selection. Nicknamed "The Wagon Wheel", only 2,800 made. Nice all original box. Original finish cabinet in very good condition. Lights up, accepts coins, plays well. No keys included. Clean it up and enjoy it. Dimensions: 61 in. high x 37 3/4 in. wide x 25 1/4 in. deep.

Wurlitzer 1015 Jukebox

Lot #2254 (Sale Order 236 of 306)

An original survivor. If you want a nice 1015, this is it. Original finish cabinet in good condition, missing a few side mirrors on the right side, very good plastics (appears to be possibly replaced), good color wheels, bubblers intact with all but the top left bubbling, coin mech, speaker, amplifier, everything is original, intact, and working. This machine spent most of its life in a home basement bar. Comes with original keys. Measures 59.5" tall, 32" wide, 25" deep.

57 Chevy Bel Air Couch & Jukebox

Lot #2255 (Sale Order 237 of 306)

Carson City Parlour Manufacturing of Minnesota created this remarkable jukebox in 1989. This is the CC Rider model and it has been reported that only 50 of these were produced. This is serial No. 2050 making this unit the end of production. Macy’s in New York sold these at Christmas in 1989 for $20,000 each! The body is the rear end of a genuine 1957 Chevy Bel Air painted metallic burgundy with a finely upholstered white sofa seat in place of the trunk and a jukebox that plays 45 rpm vinyl records. All the chrome is in excellent shape. It is designed to rest flush up against a wall. The jukebox mechanism is a 160 selection ES2-NSM Songbird, of German manufacture. The tail lights light up and it has a horn and siren button. Overall condition is excellent. Carson City Parlour was only in business for a few years and their creations are still highly sought after by collectors and interior decorators. Item Dimensions: 54"L x 72"W x 42"T.

Battery Gun Co. M1862 Gatling Gun .58 Cal (M)

Lot #2256 (Sale Order 238 of 306)

A reproduction of the famous M1862 Gatling Gun invented by Dr. Richard Gatling, this Gatling gun is fixed on a full size 2 wheel cart. This Gatling gun follows in the footsteps of the original being a .58 caliber black powder gun with a cast brass/bronze receiver, crank, barrel fitting, and front sight. The original 1862 Gatling gun made its combat debut during the Civil War where the Union would utilize them during the Siege of Petersburg. The Gatling gun would be officially adopted after the Civil War and stay in American service until after the Spanish-American War. The gun mount features a screw with turn wheel to adjust elevation and a swiveling mount held fast by a brass pin. Gun mount is a steel square bolted to the brackets for the carriage. Green painted oak timbers have a few splits in the wood. The oak wheels have metal strips on edges to take the brunt of any impact. Black painted metal on carriage has a few minor paint chips on the handles at the rear. Steel strips show signs of use with some surface rust present. The gun itself has some very minor wear to finish. Steel rifled barrels have a black powder coat finish that is in fine condition with the exception of minor pitting at the muzzles of 2 barrels. Bronze retains its shiny luster with the plate atop the rear of the gun denoting model, manufacturer, and serial number. Some minor loss of black paint present on model plate. The .58 caliber bores are mirror bright and shiny with sharp, strong rifling. Some minor surface rust present on elevation screw and some tarnishing present inside hopper well. Brass screw slots are undamaged. One 20 round magazine present in the gun with some minor wear to black paint. This gun comes with a reloading press, a transportation crate with a serial number of 0051, a tackle box with ~197 reusable steel chambers for .58 caliber, and a crate containing 4 20 round magazines for the gun. An undeniable highlight to any firearm collection and a great opportunity to own a live firing, fully functional Gatling gun! Modern firearm, will require FFL. Measures 66"T (with magazine, 45"T without) x 50"W x 70"D. LARGE ITEM, WILL REQUIRE THRID PARTY TRANSPORTER OF LOCAL PICKUP. SN: 0035

Wooden Lion Heads Bowl/Container

Lot #2257 (Sale Order 239 of 306)

Wooden lion head container that was used in some sort of carnival game. Lid has 3 prongs that likely would have held onto a target of some sort and sat atop the heads. Item could also hold various items from prizes or be a money box. Appears hand painted with some areas of worn paint but over 85% of the original color present. An interesting piece. See photos. Measures 12" in diameter and 8.5"T.

Attracto Clockwork Jewelry Store Automaton

Lot #2258 (Sale Order 240 of 306)

Store-Front Clockwork Advertising Automaton made by Attracto Co of Philadelphia PA for W.W.W. Guaranteed Rings, circa 1930. Features two painted metal dwarves with articulated arms rhythmically beating an anvil on block marked "Stones Do Stay In", above two linked brass rings on a perpetually swinging diamond-shaped "pendulum" linked by eccentric crank to open-spring motor, in oak frame with placard "Buy a W.W.W. GUARANTEED RING for Yourself, or as a GIFT. A GOOD RING is a sign of Prosperity and Success. As a GIFT it is Always Acceptable - NOTE" Placard is damaged with a big chunk missing. Winds and runs. Includes key. Measures 16" wide, 24" tall.

Ingersoll Pocket Watch & Clock Display Case

Lot #2259 (Sale Order 241 of 306)

A two piece display case for displaying watches and alarm clocks made by the Ingersoll Clock company. Display case is made of lithographed tin disguised as wood with the exception of a wooden base. Yellow pinstripe bordering present on front of display case. Glass front panes are both free of chips and cracks though top glass has a few scratches. Bottom case has an Ingersoll Yankee pocket watch in original box, a pair of advertisements for Waltham Railroad watches and Elgin Railroad watches, and a partial box for an Ingersoll Eclipse Radiolite. Original label present on back of top case and in mostly legible condition with some stains. Exterior has some usual wear. Glass panels are free of chips and cracks. Neat display case. Case measures 26"W x 7.25"D x 24.125"T. See photos.

Ribbon Dispensing Cabinet

Lot #2260 (Sale Order 242 of 306)

A cylinder wooden cabinet that is used to dispense ribbons. This cabinet is made up of 4 doors and each door has room for 24 ribbons in various sizes for a total of 96 different ribbons. Each slot has a locking pin to lock the roll in place so you can cut the ribbon easier. Cabinet wood is in fair condition with no finish. Each door is locked into place via a small peg on each door and a metal beam holding it closed. Measures 24” in diameter x 35”T.

Chicago Coin Band Box

Lot #2261 (Sale Order 243 of 306)

Chicago Coin’s Band Box Model 50-100 Serial No. 1888. Made from 1950 to 1952 it is a small stage with a curved front and curtains with an 10" speaker on the bottom.. Measures 45 ¾” wide X 28 ¾” tall X 24” deep. It is made to be connected to a jukebox (not included). When the jukebox starts, it closes a switch which causes the band box lights to go on and the curtains to open, revealing a seven piece band with their instruments. They move as if they are playing the music. when the record ends, the curtains close and the lights go down. Chicago Coin marketed it as a speaker that looks like an Orchestra. This Band Box is an original 1950 Chicago Coin piece that has undergone restoration.

Triple Arch Brunswick Saloon Bar Gene Autry

Lot #2262 (Sale Order 244 of 306)

Brunswick Triple Arch Bar From Gene Autry Museum. This triple arch Brunswick bar has quite a provenance. A plaque affixed to the front bar reads, “This historic bar was used by a popular saloon in Dodge City, Kansas from 1880 until about 1960 when the building was demolished during a redevelopment project. This bar played host to the cowboys, gamblers, and gunfighters of the Great American West.” The next owner was the famous singing cowboy and actor, Gene Autry. It stayed in his collection until it was sold at auction on Nov 19, 1989. A copy of the auction catalog with the bar pictured is included. The bar’s next stop for 20+ years was at the Imperial Palace Hotel & Casino in Las Vegas, Nevada. When the Imperial Palace changed hands and remodeled in 2012 the bar made its way to a California automobile collector who set up his own saloon with his auto collection. The bar is once again being offered at auction and ready to write its next chapter. The flame grain mahogany top features acanthus leaf topped columns, carved lions heads on the arches, and beveled mirrors. The front bar has a brass foot rail. In overall very nice condition. The back bar measures 10’-9.5” tall, 19’-11” long, 24” deep. Front bar measures 25’-2” long, 44” tall, 29” deep.

Large Framed Nude Oil Painting on Canvas

Lot #2262a (Sale Order 245 of 306)

Unsigned painting of a nude woman by a waterfall mounted in a fancy gold frame. Great subject matter for a saloon. Measures: 33"wide, 47.5" tall.

Large Statue of a Female Dancer 54" Tall

Lot #2263 (Sale Order 246 of 306)

Circa 1900 statue of a bare breasted female dancer with outstretched arms balancing on a sphere. The sphere is on a plinth. The finish is a two tone polychrome on metal, probably zinc. In very good original condition with one professional repair on the statue's thumb that is hardly noticeable. This beautiful piece came from a private Milwaukee, Wisconsin museum where it has resided for the past 70 years. Measures 54" tall, 32" wide.

Pair of Antique Brunswick Oak Saloon Doors

Lot #2263a (Sale Order 247 of 306)

Classic swinging saloon doors in oak. All original hinges. Brass Brunswick push plates. No glass included. All trim included for installing glass. Doors have been refinished and are ready to be installed with your glass design. Each door measures 66.5" tall, 25" wide, 1.25" thick.

Dorothy Weigant Nude Oil Painting

Lot #2263b (Sale Order 248 of 306)

Dorothy Weigant nude lady getting dressed oil on canvas In gold painted wood frame, signed “Dorothy Weigant 76” . Measures 23.5” wide, 27.5” tall.

Large Classic Victorian Style 3 Light Chandelier

Lot #2263c (Sale Order 249 of 306)

This magnificent Victorian style design solid brass 3 light chandelier features and elaborate solid brass casting throughout finished in bright brass and lacquer. There are 3 high quality milk glass shades, 2 measuring 12” in dimeter with a larger 14” in diameter center shade. Includes 3 frosted glass chimneys. Near the top are 2 Griffins. Complete with heavy cast canopy and chain. Fixture is a high quality replica, ready to hang and enjoy. Measures 48”W x 32”T + 30” chain and canopy. A real beauty.

Giant Side Show/Circus Tent Entry Banner

Lot #2264 (Sale Order 250 of 306)

A massive circus tent entry banner reading "The World's Most Complete Congress of Strange People and Human Oddities/Novel and Unique Performances/for Refined Ladies, Gentlemen, and Children of all ages". Made out of rubberized canvas and single sided. Banner is wonderfully detailed with a maroon border with orange interior border. Wording is clear and legible. Banner is somewhat dirty with stains throughout and some minor wear to color and fading. Appears to be free of rips or tears. A very neat display piece. 14'6" x 12'7", opening is 78" x 62". See photos.

Ferris Wheel Amusement Park Ride Seat

Lot #2265 (Sale Order 251 of 306)

A seat for a Ferris wheel consisting of a base with triangular sides and the seat itself. Steel base has sides marked "5¢ a Ride". Seat is marked "#4" on the sides and has a folding footrest. Sides of footrest are marked "HR Patd Aug 8, 05". Seat has red padding in very good condition though slightly dirty. Yellow paint is in excellent condition. A very neat seat. Measures 58"W x 40"D x 41.75"T. See photos. LARGE ITEM, WILL REQUIRE THIRD PARTY TRANSPORT OR LOCAL PICKUP.

W.F. Mangles Amusement Park Boat Ride

Lot #2266 (Sale Order 252 of 306)

A restored amusement park boat ride made by W.F. Mangles in the 1950s. This boat has a unique restoration from the original design by having a wooden appearance similar to a Chris Craft boat but still retains the U.S. Navy theme. Light of the boat has a battery that can be hooked up. Boat comes with a stand that has an anchor and sea floor. Nice upholstered seats. Great display piece from mid 20th century American amusement park rides. Measures 67"L x 22"W x 17"T without stand and 50"T with stand.

Vintage Child Mannequin w/Period Clothing

Lot #2266a (Sale Order 253 of 306)

Vintage Child Mannequin w/Period Clothing, mannequin has composition head with original painted features, body is sock cloth construction with no composition body parts, clothing consists of blue wool pants and cotton blue sailor shirt, face has some scratches, minor scuffs and finish wear. Painted eyes on unmarked head. Shoes are marked “Made in U.S.A.”. Uniform is slightly dirty but appears free of rips or tears. Measures 28.25”T x 12”W x 6”D. See photos.

Antique Brass Boat Binnacle

Lot #2267 (Sale Order 254 of 306)

Ship binnacles were mounted compasses for a ship that has to compensate for the magnetic affect of the iron ship in order to give the correct reading. This was achieved with various magnetic instruments in the center. Other binnacles also used timers for speed and oil lamps for vision. The center has a large glass window for viewing the compass itself which can rotate on the X Y and Z plane with 2 iron correction spheres on either side and the fore and aft magnets below, shielded by a door. Inside the door has 2 crank handles for adjustment mounted on the sides. This binnacle is made almost entirely from brass. Comes with multiple tubes and caps for the crew to add lamps and other instruments. Marked "Lionel NY USA" on compass face. Top section that shields the compass has some cracks in the brass, all of which have been repaired. Brass surfaces could use a good cleaning but overall, this binnacle is in good condition and would made a great display piece or conversation starter. Measures 59"T x 34"W x 19"D.

Brass Ship Speed Control

Lot #2268 (Sale Order 255 of 306)

Brass ship speed control. Mae by Instrument Laboratory Inc. in Seattle Washington. Control has room for 10 different speeds, 4 for going back and ahead, stop and standby. Back positions are in red. See photos. Measures 12" in diameter and 4.5" tall.

Large Fairbanks Morse & CO. Coffee Grinder

Lot #2269 (Sale Order 256 of 306)

Large cast iron coffee grinder made by Fairbanks Morse & Co. in Chicago. This hand cranked coffee grinder measures about 70"T with 34" wheels. Dated 1894 and comes with catching pan. Paint has been restored some time ago in a bright and beautiful red color with yellow details. Brass hopper has a copper top and is in very good condition with some small dents. Wheels turn with little noise and resistance. Each wheel is marked "Fairbanks Morse & Co. Chicago." on the outside. Overall, this is an excellent large coffee grinder.

Vintage Lipton Ltd Brass & Cast Iron Kitchen Scale

Lot #2270 (Sale Order 257 of 306)

A tall kitchen scale with center arm marked "Lipton Ltd". Scale arm is also marked "Walter Parry" on one side with "To weigh 4lbs" and "2730 DSTEC" on the other side. Center arm, pivot, and tray bases are made of brass with cast iron frame atop a wood base. One tray has a mirror top and the other tray is a dull brass tray with lip. Brass tray is suspended by 3 chains, mirror tray rests atop a base connected to an offset arm. Scale comes with a set of 13 weights ranging from 1 gram to 1 kilogram. Scale is in overall very good condition with some tarnishing to brass. Wood base has some paint chips to black paint. Measures 31"T x 23.5"W x 7"D. See photos.

Vintage Restored Toledo Candy Scale on Stand

Lot #2271 (Sale Order 258 of 306)

A custom restored vintage 1 1/4 pound true candy scale with custom pinstriping. Redecaled and brass plated parts, tray and stand. The glass on the back side is cracked down low but is hardly noticeable. Back casting is cracked by chip of paint at top. This is all in the back of the scale. Front shows wonderfully. Overall good condition. Measures 18”T x 11”D x 15.5”W.

Voland Precision Laboratory Apparatus

Lot #2272 (Sale Order 259 of 306)

A high precision balancing scale made by Voland and was once used by NASA. This scale is much more accurate than other commonly seen balancing scales and therefore was used for delicate machining equipment that is only a few grams heavy. Scale comes in a large wooden case with glass side panels. Front panel can be lifted up to give access to the scale. Unknown if scale is 100% complete but does weigh items as it is intended to. Comes with some misc. weights. Various stickers and decals on the case and scale. Overall, very good condition and an interesting scale not seen very often today. See photos. Measures 37.5”W x 13”D x 40.5”T.

Vintage Surveying Tool

Lot #2273 (Sale Order 260 of 306)

Vintage surveying tool used for measuring building sites. Tool is made from brass and comes mounted on a wooden board. Lenses are not cracked but could use a quick cleaning. Eye piece appears to have been stripped and was once glued to the telescope. Unknown maker and if complete. Overall good condition. See photos. Measures 11.5"L x 13"T x 9"W.

Negretti & Zambra Vintage Brass Telescope

Lot #2274 (Sale Order 261 of 306)

Vintage telescope made by Negretti and Zambra in London as stated on the front. Made in the later half of the 19th century. This all brass telescope has multiple focusing and adjustment dials. Smaller scope in the side appears to be inverted. Lenses have no cracks or fogging. There are several small screws missing. Brass has some wear but overall, a good and usable telescope. Comes on an adjustable wooden tripod stand. Scope length is 62.5” long. Magnification unknown. See photos.

Duffner & Kimberly Water Lily Table Lamp

Lot #2275 (Sale Order 262 of 306)

A Duffner & Kimberly table lamp with water lily leaded glass lamp shade made circa 1920. Shade features pink and cream water lilies and green lily pads on a background of vertical amber and green striated panels that are narrow and wide, respectively. Shade rests on a thistle designed Duffner & Kimberly base with the thistles decorating the base and shaft of the lamp. Shaft has a 4 socket cluster near the top with a pull chain for each socket as well as a fleur-de-lis cap. Lamp base has a nice brown patina finish. Both lamps and shades exactly like this one are pictured in Paul Crist's book "Mosaic Shades Vol. II" on page 215. Lamp has been rewired with appropriate cloth wire. Glass shade is in near excellent original condition with just a few minor hairline cracks in the leaves of the lilies. Lamp base is in very good condition and lamp lights up when plugged in. A very nice example of a Duffner & Kimberly water lily table lamp. Shade measures 18" in diameter, lamp measures 24.5"T. See photos.

Lamb Bros. Leaded Glass Table Lamp

Lot #2276 (Sale Order 263 of 306)

A Lamb Bros. produced leaded glass table lamp with a complicated geometric pattern to the leaded glass shade circa 1922. Lamp shade colors features light browns, pale yellows, and milk white. Lamp shade sits atop a plain brass lamp base with circular base and plain shaft. There are two sockets opposite each other near the top of the lamp shaft. Lamp shade appears to have a few small hairline cracks and is in otherwise excellent condition. Lamp base has a small ding and some very minor tarnishing. Lamp has been rewired with cloth power cord and lights up when plugged in. Shade measures 20" in diameter, lamp measures 25.25"T. See photos.

1800's Bank Cashier Window New Hope KY

Lot #2277 (Sale Order 264 of 306)

This is the cashiers window from the Peoples Bank of New Hope Kentucky which dates to the Civil War. New Hope was a small Kentucky distillery town serviced by the Louisville & Nashville RR. There is not much left there today but the original bank still stands and the original bank vault is still intact (see pics). The bank had been robbed several times, once purportedly by Jesse James, prompting the bank to cut an escape hole in the vault because the bank employees were being locked in the vault. The "Z" shaped cashiers window comes apart in 3 pieces. Made of oak with a pink marble cashier work surface and matching marble kick plates. Chipped glass windows with decorative metal grill work tops are part of the sections that flank each side of the cashier window. Cashier section has a bowl front with decorative carvings as well as decorative metal scrollwork, topped with oak finials. A very unique piece of history. Overall measures 11'-2" wide, 7'-5" tall to the top of the finials.

Continental Red Vase

Lot #2278 (Sale Order 265 of 306)

Artisan handwork of monumental proportions. No ground pontle. Signed in white on one side. Excellent condition. Measures 29"T x 8.5"W. See photos.

Vintage Wooden Carousel Horse

Lot #2279 (Sale Order 266 of 306)

A wooden carousel horse for riding in a carousel. Horse is well worn with age with numerous splits in the wood. The left glass eye is missing. Horse has a removable straw tail. Hole just behind neck for mounting to metal carousel pole with no pole present. In as found condition. Measures 66"L x 12"W x 40.5"T. See photos.

Kiddie Ride Horse

Lot #2279a (Sale Order 267 of 306)

Cast iron horse from a kiddie ride. In good condition but needs a repaint. 2 mounting pipes on the bottom. Measures 38" long, 22" tall.

1932 Spillman Carousel

Lot #2280 (Sale Order 268 of 306)

This carousel has been in the Wilson family since it was built in 1932 by Spillman Engineering of North Tawanda, New York. Wilson Famous Shows of Astoria, Illinois traveled the carnival circuit for over 50 years. Ray Wilson, whose father started the business in 1911, ran the traveling carnival until shortly before his passing in 1984. Ray spent the last winter of his life working on the carousel getting it ready for the next season. It was not to be. For the next 37 years, the carousel lay stored in it’s enclosed travel trailer, waiting. The family has decided to sell it as one unit rather than breaking it up for the horse value hoping that someone will restore it. The carousel is a 2 abreast unit with 20 jumpers and a chariot. The all wood, carved horses are stripped and ready for restoration. The mechanism needs a total rebuild with several castings and the main bearing broken. It is almost unheard of that a carousel comes to market with its complete history let alone in the hands of the original owners. The family will provide the new owner with vintage photographs and the history of the carousel.

Classic Vintage Brass and Crystal Hanging Fixture

Lot #2282 (Sale Order 269 of 306)

This impressive fixture with a classic design features 5 arms with beaded crystal baskets and pendants, large lower crystal beaded basket surrounded by pendants, as well as 5 brass and crystal cascading strands. Fixture is most likely European origin and made in the 1960’s however the exact age is unknown. This was in working condition when it was removed however this wiring needs attention and it is recommended to rewire all old lamps, being sold as is. Measures about 22” in diameter at the widest point and 42” tall overall. Should restore nicely.

Powers 35mm Silent Movie Projector

Lot #2283 (Sale Order 270 of 306)

Powers 35mm Cameragraph Model 6B Silent Movie Projector, beautiful original condition! Complete with base, speed control, motor, gorgeous lamp house, knife switches, with stereo lens, carbon arc lamp, glass slide carrier. Came from Wrigley Chewing Gum Estate in Chicago, circa 1909. Mechanism works fine, including motor drive, included with this lot is the appropriate power supply. Can breakdown into smaller components for easier shipping.

Metal Man Lawn Art Sculpture

Lot #2284 (Sale Order 271 of 306)

A lawn art sculpture in the shape of a man carrying a satchel and a whip. Man is made out of sheet metal with hollow interior aside from central stand. Man is wearing a hat and statue stands on flat metal base. Sculpture has patina throughout with some minor patches of rust present. A very neat display piece. Measures 61"T x 24"W x 26"D. See photos.

Scrap Metal Art Cowboy 1

Lot #2285 (Sale Order 272 of 306)

The Chacoengsao Province of Thailand is world renowned for it’s colony of Scrap Metal Artists. Using metal automotive scrap such as gears, chains, spark plugs, pistons, and struts, these artists create one of a kind sculptures that get attention. Many commercial facilities display this art in gardens, fountains, and hotel lobbies just to name a few. Some of their art includes life size automobiles, Predator creature figures, and giant fish. These larger than life figures sell in the $15,000 - $20,000 range, plus shipping from Thailand. This cowboy sculpture, one of 3 being sold, was commissioned in the 1990’s and shipped to the United States. All three sculptures laid forgotten in their shipping crates in a warehouse in Summit, Illinois until the spring of 2021 when they were re discovered and the owner, who now lives in Hawaii, was contacted. Each sculpture is unique measuring 7’-8” tall and weighing about 300 lbs. It comes apart in 5 pieces, head, torso, legs, and arms. Would make a great statement in your bar or restaurant or Gun Shop.

Scrap Metal Art Cowboy 2

Lot #2286 (Sale Order 273 of 306)

The Chacoengsao Province of Thailand is world renowned for it’s colony of Scrap Metal Artists. Using metal automotive scrap such as gears, chains, spark plugs, pistons, and struts, these artists create one of a kind sculptures that get attention. Many commercial facilities display this art in gardens, fountains, and hotel lobbies just to name a few. Some of their art includes life size automobiles, Predator creature figures, and giant fish. These larger than life figures sell in the $15,000 - $20,000 range, plus shipping from Thailand. This cowboy sculpture, one of 3 being sold, was commissioned in the 1990’s and shipped to the United States. All three sculptures laid forgotten in their shipping crates in a warehouse in Summit, Illinois until the spring of 2021 when they were re discovered and the owner, who now lives in Hawaii, was contacted. Each sculpture is unique measuring 7’-8” tall and weighing about 300 lbs. It comes apart in 5 pieces, head, torso, legs, and arms. Would make a great statement in your bar or restaurant or Gun Shop.

Scrap Metal Art Cowboy 3

Lot #2287 (Sale Order 274 of 306)

The Chacoengsao Province of Thailand is world renowned for it’s colony of Scrap Metal Artists. Using metal automotive scrap such as gears, chains, spark plugs, pistons, and struts, these artists create one of a kind sculptures that get attention. Many commercial facilities display this art in gardens, fountains, and hotel lobbies just to name a few. Some of their art includes life size automobiles, Predator creature figures, and giant fish. These larger than life figures sell in the $15,000 - $20,000 range, plus shipping from Thailand. This cowboy sculpture, one of 3 being sold, was commissioned in the 1990’s and shipped to the United States. All three sculptures laid forgotten in their shipping crates in a warehouse in Summit, Illinois until the spring of 2021 when they were re discovered and the owner, who now lives in Hawaii, was contacted. Each sculpture is unique measuring 7’-8” tall and weighing about 300 lbs. It comes apart in 5 pieces, head, torso, legs, and arms. Would make a great statement in your bar or restaurant or Gun Shop.

Michael Jackson Light Up Casino Sign

Lot #2296 (Sale Order 275 of 306)

A light up sign of Michael Jackson, made for a casino in Las Vegas by Yesco. This was not sold publicly and only offered to the casino for a show. This 6 foot tall life sized sign is not an everyday sign but high quality. Sign has some of the edging coming off and a few scuffs here and there but overall in very good condition. Front panel is starting to come off on the leg but should be a simple fix. Great for music fans or gambling machine collectors.

RKO Pictures Movie Studio Light

Lot #2297 (Sale Order 276 of 306)

A nicely restored studio light with the back of the light marked "14-A-34 RKO Radio Pictures". Back of the light has control for either flood or spot. Retains the original Fresnel lens. Light stand has elevation and rotation screws to hold the light in the desired position. Comes with "barn doors" as well as power cord. Rear door has part of the hinge broken off which results in the door falling when opened. Measures 66" tall but will extend to 10'.

Shure Brothers Model 333 Microphone & Stand

Lot #2298 (Sale Order 277 of 306)

A Shure Brothers uni-directional Model 333 microphone complete with stand. Microphone has decorative bracket marked "MGM" on top. Microphone has manufacturer's plate with model name and info present at base of microphone. Stand is adjustable for height with threaded collar locking telescoping stand in place. Microphone appears to be in very good condition but is untested. Measures 42.5"T x 10"W. See photos.

Unidyne Model DY12R Microphone & Stand

Lot #2299 (Sale Order 278 of 306)

An Unidyne Model DY12R microphone complete with stand. Microphone has decorative bracket marked "RKO" on top. Microphone has manufacturer's plate with model name and info present at base of microphone. Stand is adjustable for height with threaded collar locking telescoping stand in place. Microphone appears to be in very good condition but is untested. Measures 41.5"T x 9.5"W. See photos.

Victrola Double Sided Dealer Sign

Lot #2300 (Sale Order 279 of 306)

This magnificent Circa 1920's Victrola outdoor sign was offered for sale to Victor phonograph dealers through an industry trade magazine called, The Voice of The Victor. Commonly referred to as an “opal glass” sign with puffed out glass letters, this style of signage fell out of favor by the mid 1920’s due to the emerging popularity of neon. This is possibly the only known example of an opal glass Victrola sign to survive. We believe that this sign originally hung outside of a dealership in or near Detroit Michigan based on information on the sign. Hand lettered on the street end of the sign is, L.F.R. Bellows Co. Agt. Detroit, MI. Bellows was a major sign company based in Detroit which installed and serviced signs. The double-sided hand painted all metal cabinet has cutouts for the individual glass letters and an oval at the top of the face which displays a reverse on glass color rendition of the iconic “His Master’s Voice” logo. Only one of the original glass ovals survived and was badly deteriorated. The image was digitally rebuilt, and two new glass ovals were made and installed in the cabinet. The metal cabinet as well as the opal glass letters are all original and in very good condition. Sign illumination is provided by 10 internal 110V Edison base bulbs. The wiring and lamp sockets have been checked and cleaned, and a new grounded power cable has been added. The original surviving oval glass logo is included and will go to the winning bidder. Sign measures 7’W X 35” T X 9.5”D.

Edison Stock Ticker Tape Machine

Lot #2300a (Sale Order 280 of 306)

Iconic Edison stock ticker circa 1920's complete with glass dome and the ink box which is usually missing. Front of cast iron base reads, QUOTATIONS FURNISHED BY THE WESTERN UNION TELEGRAPH CO. APPLY TO LOCAL MANAGER. The invention of the stock ticker allowed brokers to receive quotes directly at their office rather than having to be at the exchange. Comes with a roll of paper "tape". In overall VG condition Measures 8" diameter, 13'5" tall with glass dome.

Large National Life Sign on Post

Lot #2301 (Sale Order 281 of 306)

Vintage National Life & Accident Insurance Co. porcelain sign. It is actually 2 SSP signs that have been mounted back to back in a custom made frame on top of a pole. The signs are shield shaped and measure 60" tall, 53" wide. The frame is welded to a square pole that 9'-10" tall with a new 34" X 32" X 8" base making the pole a total of 10'-6" to the bottom of the sign bracket. Sign has no lights. Both signs have two .22 cal bullet holes and there is a chip in the porcelain where every mounting screw hole was drilled (see pics).

1950s Theme Car Hop Neon Sign

Lot #2302 (Sale Order 282 of 306)

A fabulous modern creation of a classic 1950's female car hop neon sign facing right posing on roller skates, holding a tray with a shake, fries, and a sundae. Neon is in perfect working order. Neon mounted on a hand painted die cut metal sign can. In overall excellent condition. Operates on 110v. Great addition to any ice cream shop, 50s themed restaurant, or man cave. Measures approximately 72" Tall, 36" Wide, 6.5" Deep. See photos.

1950s Theme Car Hop Neon Sign

Lot #2302a (Sale Order 283 of 306)

A fabulous modern creation of a classic 1950's female car hop neon sign facing right posing on roller skates, holding a tray with a shake, fries, and a sundae. Neon is in perfect working order. Neon mounted on a hand painted die cut metal sign can. In overall excellent condition. Operates on 110v. Great addition to any ice cream shop, 50s themed restaurant, or man cave. Measures approximately 72" Tall, 36" Wide, 6.5" Deep. See photos.

Federal Sugar Refining Co Framed Advertising

Lot #2303 (Sale Order 284 of 306)

Federal Sugar Refining Co. framed advertising lithograph. The company was a producer of sugar in the early 20th century. This advertisement shows one of their factories located in New York. There is a small crease in the middle section that has created some discoloration. Colors are bright and the lithograph is in overall very good condition. See photos. Measures 41.5"W x 21.5"T.

Post Prohib Green River Whiskey Framed Ad

Lot #2304 (Sale Order 285 of 306)

A framed advertising piece with the post prohibition slogan "The Whiskey Without Regrets" featuring a man with a horse with a Green River whiskey jug. Advertising is framed in wood frame with some minor surface wear. Bottom left corner is marked "1919/By Oldetyme Distillers Inc." and bottom right corner is marked "Litho in USA Consolidated Lithographing Corporation Brooklyn N.Y." with small logo in bottom right corner. Frame measures 29.75"W x 22.75"T. See photos.

Large J.C.PENNEY Company Yellow Sign

Lot #2305 (Sale Order 286 of 306)

A single sided, 4 piece, long yellow porcelain sign reading "J.C. PENNY COMPANY" and flanked with the J.C Penny monogram on either side. J.C. Penney Company would start when James Cash Penney start his own retail store on April 14, 1902. It would grow to 34 different locations before being consolidated under J.C. Penney Company, Inc in 1913 with the company operating today as Penney IP, LLC. Sign has some wear with scuffs and chips to yellow porcelain front. Some rust present where porcelain has chipped off. Sign measures approximately 530 inch or 44.17 feet long when all sections are put together. An excellent opportunity to own a complete 44' sign and a great piece of J.C. Penney Company history. See photos.

Schlitz Globe Statue Advertising

Lot #2306 (Sale Order 287 of 306)

A light up advertising display for Schlitz beer. Display features a robed woman holding up the iconic globe with the Schlitz banner across the front. Base pedestal also bears the Schlitz name. Comes with an intact power cord. Globe and base light up when plugged in. Globe has a pair of cracks at the base where it surrounds its support from the woman's hand. Some wear present to gold finish with a small chip to paint on woman's right hand. Overall good condition. Measures 45"T x 9.25"W x 7.5"D. See photos.

Colt Gun Hanging Advertising Wood Sign

Lot #2307 (Sale Order 288 of 306)

Wooden hanging advertising sign for Colt firearms. Single sided sign takes the shape of a revolver with a smaller metal sign hanging down with the Colt logo. Metal sign has some paint wear but overall in very good condition. Perfect for any Colt and firearms collector. Measures 45"W x 19"T.

Ironrite Electric Light Up Clock

Lot #2308 (Sale Order 289 of 306)

Ironrite light up electric clock. Clock is untested due to the cord needing to be repaired as it is missing one of the prongs for the plug. Back side is rusty from age as seen in the photos. Labels are worn but present. Overall, a useable clock after some repairs and a good cleaning. See photos. Measures 18.5"T x 18.5"W x 6"D.

Ingersoll Waterbury Electric Clock Display

Lot #2309 (Sale Order 290 of 306)

Electric clock made by Waterbury Clock Co. some time in the 1930s. This would have been used to display Ingersoll watches in stores. Ingersoll went bankrupted in 1921 and was sold to Waterbury. Clock has both company's names on the front with Ingersoll Watches on the case and Waterbury Electric on the clock face. Cord is in good condition but missing the cloth cover over the 2 cords but does not expose any wiring. Has some minor wear from age but overall in good condition. See photos. Measures 13.5"W x 8"D x 19"T.

Vintage Double-Bubble Pepsi Clock

Lot #2310 (Sale Order 291 of 306)

Seldom seen DB style Pepsi clock by Advertising Products of Cincinnati, Ohio. Measures 16" in diameter, lights up, and runs perfect.

Vintage Claudette Colbert Royal Crown Cola Ad

Lot #2311 (Sale Order 292 of 306)

A single sided advertisement for Royal Crown Cola featuring the actress Claudette Colbert with a bottle of Royal Crown Cola. Ad promotes her upcoming film "The Egg and I" and depicts Colbert in an evening dress on a movie set with a freshly opened bottle of RC Cola. Bottom right corner reads "A Product of Nehi Corp." as well as "CC-No. 212 C Nehi Corp., Columbus, GA". Ad is in very good condition and has been professionally shrink wrapped on cardboard. Measures 28"W x 11.375"T. See photos.

Vintage 50's 7-Up Ad

Lot #2312 (Sale Order 293 of 306)

7-Up ad with a copyright of 1952 printed on cardboard. "Try a cool 7-up 'float'!". Sign is in excellent condition and measures 21"L x 11"T.

Jersey Creamline Tin Litho Milk Sign

Lot #2313 (Sale Order 294 of 306)

Double sided tin litho advertising Jersey Creamline Milk. One side has fading and slight rusting, the other side is much better but still has some rusting (see pics) No holes other than the 5 mounting holes and no dents. Measures 36" in diameter.

DeLaval Cream Separator Tin Litho Sign

Lot #2314 (Sale Order 295 of 306)

Round tin litho advertising sign for DeLaval Cream Separators. This came from a Lake County IL store and has been in a collection for 60 years. In probably as good as shape as you will ever hope to find. Very good colors and only a couple of small scratches. Self framing pressed steel. Measures 25.75" in diameter

Octagonal Gas Station Neon Clock

Lot #2315 (Sale Order 296 of 306)

An octagonal gas station neon clock with neon border highlighting clock face. Clock retains original face and hands beneath glass. Works have been replaced at some point. New neon and transformer recently installed. Clock face is worn with a nice original patina present now. Bottom front aluminum panel has a minor dent. Frame has some rust and oxidation on back. No inspection tag present. Clock lights up when plugged in. Came off the front of a gas station in Lake Zurich. Measures 31.25"W x 31.25"T x 6.625"D. See photos.

Western Electric Selectra Model B Coin Op Piano

Lot #2320 (Sale Order 297 of 306)

Mfg'd by the Western Electric Piano Co. of Chicago in 1925, Using a 10 tune "A" roll, the Selectra model allowed a customer to choose which song on the roll that they wanted to hear by turning the selection dial to the number listed on the tune card. The cabinet is in original finish quarter sawn oak with art glass on the upper panel, Cabinet condition is very good. Plays piano with a mandolin attachment. The mechanism has an older restoration. Machine accepts coins, lights up and tries to play but there are air leaks that prevent proper playing. Operates on 110v AC. Comes with 3 rolls. Measures 62" tall, 46.5" wide, 22.5" deep.

9 "A" Rolls For Coin Op Pianos

Lot #2320a (Sale Order 298 of 306)

Lot of 9 "A" rolls for use with coin operated pianos. Mostly newer cut rolls in very good condition. Includes 2 Christmas rolls and a Sousa March roll. See photos.

Large Belgium Coin Op Barrel Piano

Lot #2321 (Sale Order 299 of 306)

Belgium manufacture circa 1900 these large barrel pianos provided entertainment in railway stations and other type of places where the public congregated. The cabinet is made of solid wood with beveled, cut, mirror back glass panels on the doors front, and top gallery. It is pretty much all here but needs work. accepts coins and plays but is very out of tune. The cabinet needs re gluing, refinishing, and a few pieces of trim made. The beveled glass in great condition. This will make an unbelievable statement when finished. Measures 8'-10" tall, 5' wide, 27" deep. It is big AND heavy.

27" Regina Floor Model Coin-Op Music Box

Lot #2322 (Sale Order 300 of 306)

Double comb with no broken teeth. Coin operated. Accepts coins (5 cents), winds, plays, and stops at end. Has an original finish solid oak floor model cabinet with paneled front flanked by turned columns. Upper door has round glass for viewing disc and open carved corners to emit music. Lower door stores extra discs, 12 included. There is a key provided for the external door lock which works, and a key for the internal cash box door that doesn't work and the coin box door is locked. Gallery and corner finials on top. On wheels. Measures 7-2" tall, 44" wide, 18" deep.

Regina Changer Coin-Op Music Box

Lot #2323 (Sale Order 301 of 306)

26" single comb with no broken teeth. Mechanism accepts coins, cycles, and plays. Mahogany cabinet has been refinished and is in beautiful condition. Retains original brass dealer plaque of, Koehler & Hinrichs Saint Paul Minnesota. Comes with 2 finials for the top corners of the gallery which are not pictured. Comes with 11 discs. Measures 66.5" tall, 39" wide, 25" deep.

Monopol Excelsior Floor Music Box Coin-Op

Lot #2324 (Sale Order 302 of 306)

Excellent example of German quality music box craftsmanship, double comb 26 1/4" music box is in playing condition with coin mech intact, double comb has 4 broken teeth but still sounds good overall. Inside the impressive glass door is another glass cabinet covering the music box mechanism, the large cabinet is in a two-piece construction. Bottom half measures 37"x 36" x 21 3/4", top portion measures 43 1/2" x 39" x 24 1/2", add 10" in height for the top gallery board. Comes with 11 disc records.

Ornately Carved Music/Conductor Stand

Lot #2325 (Sale Order 303 of 306)

A ornately carved sheet music/conductor stand with nicely detailed stand and board. Top of stand features a musical and floral motif with borders having floral carvings and the center featuring a crossed violin and horn with some notes as well as the bass and treble clefs. Stand appears to be in overall good condition with some minor wear to the wood. A very nice looking music stand. Measures 50.75"T x 23"W x 13.5"D. See photos.

Mills Violano

Lot #2326 (Sale Order 304 of 306)

Mahogany cabinet with piano, roll mech, electric circuitry, coin mech intact. Missing the violin, arms, weights, bows, and bow motor assembly. Someone has added electronics to convert this machine to an early synthesizer. We have not plugged it in so it is untested. Being sold as a restoration project. Cabinet measures 63" tall, 43" wide, 31" deep.

Mills Coin Op Violano Virtuoso

Lot #2327 (Sale Order 305 of 306)

A Mills Violano Virtuoso ready for restoration. Appears to be a late model machine. It is a mahogany wood cabinet with beveled glass doors. The cast iron plate on the piano is intact with no cracks or repairs. The strings and pins are bright and shiny. The action is exceptionally clean. Has a Mills Novelty label marked violin # 4488 with no cracks or de lamination. The weights for the strings are present. As often the case on original machines, the pot metal arms are present but broken. The pot metal governor is present but stuck. Complete coin mech present including the covers and keys. roll frame and take up spool complete. The later machines are the most sought after for restoration. Don't let the cabinet make you shy away from this machine. The cabinet has some cosmetic problems but the bones are solid. Please look at the photos Measures 63" x 30" x 43".

1933 Pair Art Deco Pub/Pedestal Tables (2)

Lot #2328 (Sale Order 306 of 306)

This pair of tables was designed for a post office building that opened in 1933 in conjunction with the 1933 World's Fair. They were designed by the architect Salisbury, who designed other furnishings in the building as well as the building itself. The medium is cast aluminum and French marble. The tables are being sold as a pair however only one marble top remains. Marble around both bases is intact. Octagonal tops measure 42" x 42". Tables are 42" tall.


Day 2 - Annual Fall Classic
Art, Antiques & Collectibles > Donley Auction Services Inc. > Day 2 - Annual Fall Classic
Day 2 - Annual Fall Classic
by Donley Auction Services Inc. Fri, Nov 19, 2021 6:00 PM Central 3 Day Fall Classic - more items added weekly, please check back often. Day 1 (Thursday) features coin-op, gambling, jukeboxes, General Store, display cases, soda fountain, Coca-Cola, barber shop, Tobacciana, cash registers, early invention, Christmas, toys, circus, advertising, political, lighting, clocks, statues, architecture, furniture, artwork, Petroliana, nautical, and boat motors. Day 2 (Friday) features the best of the best including pinball, arcade, cash registers, barber shop, Coca-Cola, popcorn, soda fountain, railroad cars, antique and vintage cars, bikes and motorcycles, Petroliana signs, slot machines, gambling, a Gatling Gun, advertising signs, antique music, high-end antiques and rare/unusual items. Day 3 (Saturday) features antique music, phonographs, music boxes, records, rare musical instrument, advertising, pedestals and cabinets, parts and horns, tabletop radios, radio consoles, transistors, receivers, test equipment, tubes and parts. IF YOU READ ALL THE WAY TO THE END OF THIS DESCRIPTION, YOU KNOW YOU DO NOT WANT TO MISS THIS ANNUAL EVENT! Keep in mind that the auction is also LIVE in our auction gallery...come on out and see everything in person!