|
|
All rigging will be completed by Abbott Rigging. See description Lot #0 (Sale Order 1 of 255) Abbott Rigging will be rigging and loading all equipment by appointment only. Not the quoted price for rigging within the description of each lot. There will be NO removal of equipment from Dec. 23-Jan 3rd.
|
|
|
INFORMATION LOT Lot #00 (Sale Order 2 of 255) PLEASE CONTACT ZACH KITTRELL WITH ANY QUESTIONS 931-224-0699 All equipment can be operated prior to the sale day by appointment only. Call Zach Kittrell 931-224-0699 Day of Auction, the equipment will be demonstrated but customers will not be permitted to operate any equipment due to insurance and safety issues. Abbott Rigging will be removing and loading all equipment. Each lot number will have the rigging estimate included within the description.
|
|
|
Heavy Equipment Key Set 24 Keys Lot #118 (Sale Order 3 of 255) Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.
|
|
|
Manual Sealless Steel Strapping Tool Lot #119 (Sale Order 4 of 255) Model A333, works for 1/2", 5/8" or 3/4" banding, new in box
|
|
|
HMC Rosserhead Debarker Lot #120 (Sale Order 5 of 255) Model V-206, serial # 9422, includes cab, controls, and bark conveyor underneath debarker, 50 HP electric motor on head, flat track RIGGING: $1700
|
|
|
3 Strand Log Deck with Stop 'N Load Lot #121 (Sale Order 6 of 255) 10' x 17', hydraulic drive, structural steel to ground on one end only RIGGING: $600
|
|
|
Hydraulic Pack Lot #122 (Sale Order 7 of 255) Was used on lot 120-121
|
|
|
Cleated Concave Bark Conveyor Lot #123 (Sale Order 8 of 255) 30" x 58' on incline, 24" belt, electric drive RIGGING: $500
|
|
|
36" 4HB Edmiston Carriage Lot #124 (Sale Order 9 of 255) Serial 688-E, 14' 6" carriage, 50' track, new headblocks and plumbing in 2016, computerized hydraulic setworks, includes cab and controls, 1st lot of an entirety
|
|
|
50 HP Hydraulic Pack Lot #125 (Sale Order 10 of 255) Was used on carriage drive
|
|
|
10 HP Hydraulic Pack Lot #126 (Sale Order 11 of 255) Was used on setworks
|
|
|
54" Edmiston Husk with Topsaw Lot #127 (Sale Order 12 of 255) 22" topsaw with 20 HP electric motor, no drive on husk
|
|
|
Toshiba Electric Motor Lot #128 (Sale Order 13 of 255) 150 HP, 1770 RPM, 444T frame, includes starter, was used on lot 127
|
|
|
Starter For Husk Motor Lot #128A (Sale Order 14 of 255) |
|
|
Edmiston Drop Belt Lot #129 (Sale Order 15 of 255) 29" x 102", 18" belt, air cylinder, no drive
|
|
|
3 Strand Transfer Deck with Stop 'N Load Lot #130 (Sale Order 16 of 255) 112" x 198", hydraulic drive, does not include structural steel to ground
|
|
|
48" HMC Log Turner Lot #131 (Sale Order 17 of 255) Model CT-12, serial 64899, chain type, hydraulic drive
|
|
|
30 HP Hydraulic Pack Lot #132 (Sale Order 18 of 255) Was used on lot 130 and 131
|
|
|
Entirety Lot 124-132 Lot #133 (Sale Order 19 of 255) With 10% raise RIGGING $ 4000
|
|
|
54" Saw Blade Lot #134 (Sale Order 20 of 255) F style
|
|
|
54" Saw Blade Lot #135 (Sale Order 21 of 255) F style
|
|
|
56" Saw Blade Lot #136 (Sale Order 22 of 255) 2 1/2 style
|
|
|
*52" Circle Blades Lot #136A (Sale Order 23 of 255) F style, 1 right hand and 1 left hand, good condition
|
|
|
*52" Circle Blades Lot #136B (Sale Order 24 of 255) F style, 1 right hand and 1 left hand, good condition
|
|
|
*52" Circle Blades Lot #136C (Sale Order 25 of 255) F style, 1 right hand and 1 left hand, good condition
|
|
|
*52" Circle Blades Lot #136D (Sale Order 26 of 255) F style, 1 right hand and 1 left hand, good condition
|
|
|
*52" Circle Blades Lot #136E (Sale Order 27 of 255) F style, 1 right hand and 1 left hand, good condition
|
|
|
Mellott Rollcase with Pop-Up Transfer Lot #137 (Sale Order 28 of 255) 32" x 18', 6 1/2" x 24" rolls, 24" roll spacing, 1 1/2" shaft, electric drive RIGGING: $500
|
|
|
Rollcase with Pop-Up Transfer Lot #138 (Sale Order 29 of 255) 48" x 26' 6", 9" x 30" rolls, 30" roll spacing, 3" shaft, electric drive RIGGING: $500
|
|
|
4 Strand Incline Transfer Deck Lot #139 (Sale Order 30 of 255) 10' wide x 9' long, electric drive RIGGING: $400
|
|
|
3 Strand Transfer Deck Lot #140 (Sale Order 31 of 255) 8' x 14' 6" x 36" high, electric drive, air pop-up stops, incline deck RIGGING: $500
|
|
|
H.E. Wilson Gang Edger Lot #141 (Sale Order 32 of 255) Serial # F16879, 6" x 48", 9' infeed, 2- 21' tailing belts, return belt on side, includes laser lights and spacers, no drive RIGGING: $1700 WITH MOTOR
|
|
|
Edger Blades Lot #141A (Sale Order 33 of 255) 22", 3 1/2" arbor 3 hole pattern, 30 piece
|
|
|
Baldor Electric Motor Lot #142 (Sale Order 34 of 255) 150 HP, 1785 RPM, 445T frame RIGGING: $400
|
|
|
Starter For Edger Motor Lot #142A (Sale Order 35 of 255) RIGGING: $150
|
|
|
Belt Conveyor Lot #143 (Sale Order 36 of 255) 26" x 23' x 35" high, 24" belt, electric drive RIGGING: $300
|
|
|
4 Strand Transfer Deck Lot #144 (Sale Order 37 of 255) 11' x 21', electric drive, no legs included RIGGING: $500
|
|
|
Spiral Rollcase Lot #145 (Sale Order 38 of 255) 30" x 17' 6", 8" x 24" rolls, 24" roll spacing, 1 1/2" shaft, electric RIGGING: $400
|
|
|
6 Strand Transfer Deck with Pop-Up Lot #146 (Sale Order 39 of 255) 7' x 14', electric drive RIGGING: $400
|
|
|
4 Stand Transfer Deck Lot #147 (Sale Order 40 of 255) 11' x 14' x 39" high, electric drive RIGGING: $ 700
|
|
|
7 Strand Unscrambler Lot #148 (Sale Order 41 of 255) 7' x 14' x 90" high, electric drive RIGGING: $700
|
|
|
Tierney Drop Saw Trimmer Lot #149 (Sale Order 42 of 255) Serial # DS-5872, 20' capacity, 6 blade, 24" blades, includes control box RIGGING: $1500
|
|
|
Trimsaw Blades Lot #149A (Sale Order 43 of 255) 24", 1 3/8" arbor, 16 piece
|
|
|
4 Strand Green chain Lot #150 (Sale Order 44 of 255) 10' x 32' x 38" high, electric drive, C55 roof top chain RIGGING: $1000 LOAD AS ONE PIECE
|
|
|
4 Strand Green chain Lot #151 (Sale Order 45 of 255) 10' 6" x 31' x 36" high, electric drive, C55 roof top chain RIGGING: $1000 LOAD AS ONE PIECE
|
|
|
8' x 8' Fan Lot #151A (Sale Order 46 of 255) Electric drive, located above green chain RIGGING: $300
|
|
|
Dip Tank Lot #151B (Sale Order 47 of 255) 7' x 20' x 6' high
|
|
|
Heavy Duty Lumber Cart Lot #152 (Sale Order 48 of 255) 50" x 100"
|
|
|
Heavy Duty Lumber Cart Lot #152A (Sale Order 49 of 255) 50" x 100"
|
|
|
Heavy Duty Lumber Cart Lot #152B (Sale Order 50 of 255) 50" x 100"
|
|
|
Heavy Duty Lumber Cart Lot #152C (Sale Order 51 of 255) 50" x 100"
|
|
|
Heavy Duty Lumber Cart Lot #152D (Sale Order 52 of 255) 50" x 100"
|
|
|
Heavy Duty Lumber Cart Lot #152E (Sale Order 53 of 255) 50" x 100"
|
|
|
Heavy Duty Lumber Cart Lot #153 (Sale Order 54 of 255) 50" x 128"
|
|
|
Heavy Duty Lumber Cart Lot #153A (Sale Order 55 of 255) 50" x 128"
|
|
|
Heavy Duty Lumber Cart Lot #153B (Sale Order 56 of 255) 50" x 128"
|
|
|
Heavy Duty Lumber Cart Lot #153C (Sale Order 57 of 255) 50" x 128"
|
|
|
Heavy Duty Lumber Cart Lot #153D (Sale Order 58 of 255) 50" x 128"
|
|
|
Webster Vibrating Conveyor Lot #154 (Sale Order 59 of 255) 38" x 80', 24" pan, 10" sides, electric drive RIGGING: $2500
|
|
|
Vibrating Conveyor Lot #155 (Sale Order 60 of 255) 25" x 20', 19" pan, 4 sides, electric drive RIGGING: $800
|
|
|
Cleated Concave Conveyor Lot #156 (Sale Order 61 of 255) 36" x 26', 24" belt, electric RIGGING: $600
|
|
|
Spiral Rollcase Lot #157 (Sale Order 62 of 255) 30" x 22', 10" x 24" rolls, 23" spacing, 1 7/16" shaft, electric drive RIGGING: $500
|
|
|
Rollcase Lot #158 (Sale Order 63 of 255) 30" x 35' x 6' high, 6 1/2" x 24" rolls, 30" spacing, 1 3/8" shaft, electric drive RIGGING: $ 500
|
|
|
Precision 6 Knife Chipper Lot #159 (Sale Order 64 of 255) Serial C-2615, size 15-58, key knife, no drive RIGGING: $500
|
|
|
Toshiba Electric Motor Lot #160 (Sale Order 65 of 255) 150 HP, 1770 RPM, 444T frame RIGGING: $250
|
|
|
Starter for Chipper Motor Lot #160A (Sale Order 66 of 255) RIGGING: $200
|
|
|
Webster Vibrating Conveyor Lot #161 (Sale Order 67 of 255) 30" x 70', 18" pan, 10" sides, infeed for chipper RIGGING: $2500
|
|
|
Fiberglass Section and Metal Detector Lot #162 (Sale Order 68 of 255) 34" x 58", 18" pan, 10" sides, includes control box RIGGING: $400
|
|
|
8' x 8' Shaker Screen Lot #163 (Sale Order 69 of 255) Includes structure to ground RIGGING: $1000
|
|
|
Cyclone Lot #164 (Sale Order 70 of 255) 8' diameter x 11' tall, mounted on top of chip screen RIGGING: $1000
|
|
|
Fines Auger Lot #165 (Sale Order 71 of 255) 12" x 48' RIGGING: $300
|
|
|
Chip Auger Lot #166 (Sale Order 72 of 255) 24" x 24', electric drive RIGGING: $600
|
|
|
Chip Auger Lot #167 (Sale Order 73 of 255) 24" x 24', electric drive RIGGING: $600
|
|
|
36" Dust Blower Lot #168 (Sale Order 74 of 255) 18" inlet, 40 HP electric motor RIGGING: $300
|
|
|
Hoffman Centrifugal Exhauster Lot #169 (Sale Order 75 of 255) Model 75105A1, serial # MO24650, no drive RIGGING: $400
|
|
|
Weg Electric Motor Lot #170 (Sale Order 76 of 255) 150 HP, 3575 RPM, 444 frame
|
|
|
Starter for Exhauster Motor NO GUTS Lot #170A (Sale Order 77 of 255) |
|
|
Cleated Waste Conveyor Lot #171 (Sale Order 78 of 255) 16" x 15', 13" belt, electric drive RIGGING: $400
|
|
|
2 Van Loading System Lot #172 (Sale Order 79 of 255) 36' augers, includes belt in center RIGGING: $6500
|
|
|
Cyclone with Airlock Lot #173 (Sale Order 80 of 255) 6' diameter, 16' tall RIGGING: $ 1500
|
|
|
Cyclone with Airlock Lot #174 (Sale Order 81 of 255) 7' diameter, 16' tall RIGGING: $ 2500
|
|
|
Dust Pipe Lot #175 (Sale Order 82 of 255) All dust pipe on outside by dust system RIGGING: $1000
|
|
|
Ingersoll Rand Air Compressor Lot #176 (Sale Order 83 of 255) Serial 30T446562, 120 gallon horizontal tank, 25 HP electric RIGGING: $ 500
|
|
|
Ingersoll Rand Air Compressor Lot #177 (Sale Order 84 of 255) Model U25H, 25 HP, meter reads 24,520 hours RIGGING: $ 500
|
|
|
Electra Saver II Air Compressor Lot #177A (Sale Order 85 of 255) 75 HP Gardner Denver, Cutler Hammer NEMA size 4, Series B1 Hours 53860
|
|
|
General Pneumatics Air Dryer Optima Series Lot #177B (Sale Order 86 of 255) .
|
|
|
General Pneumatics Air Dryer Midline Series Lot #177C (Sale Order 87 of 255) |
|
|
565 KW Detroit Diesel Generator Lot #178 (Sale Order 88 of 255) Engine model 71657300, meter reads 3517 hours, 1000 HP, 16 cylinder engine, well maintained unit that was in production and is in good working condition RIGGING: $1200
|
|
|
565 KW Detroit Diesel Generator Lot #179 (Sale Order 89 of 255) Engine model 71637305, meter reads 1182 hours, 1000 HP, 16 cylinder engine, well maintained unit that was in production and is in good working condition RIGGING: $1200
|
|
|
Detroit Diesel Generator Lot #180 (Sale Order 90 of 255) Generator serial # 275237931, 250 KW, hours unknown, 400 HP, 12 cylinder engine, includes 100" x 20' truck box where unit is mounted in, well maintained unit that was in production and is in good working condition RIGGING: $1000
|
|
|
Detroit Diesel Generator Lot #181 (Sale Order 91 of 255) 200 KW, hours unknown, 8 cylinder engine, 20' truck box, 400 HP, good working condition RIGGING: $1000
|
|
|
Detroit Diesel Generator Lot #182 (Sale Order 92 of 255) Generator model 185DR-6R60, serial # 6A373623, engine model 1063-7305, 185KW, 6 cylinder engine, 330 HP, meter reads 1442 hours, works good but needs voltage meter, includes 20' truck box RIGGING: $1000
|
|
|
ACME Circle Saw Lot #183 (Sale Order 93 of 255) Serial # 5210, electric drive
|
|
|
Oliver Circle Saw Sharpener Lot #184 (Sale Order 94 of 255) Model HWACE, serial # HDACE648
|
|
|
Armstrong Pro-Filer Lot #185 (Sale Order 95 of 255) 58-8, meter reads 7856 hours RIGGING: $500
|
|
|
Dayton Grinder Lot #186 (Sale Order 96 of 255) |
|
|
Armstrong Handsharpener Lot #187 (Sale Order 97 of 255) Number 54, serial 6572
|
|
|
ACME Circle Saw Sharpener Lot #188 (Sale Order 98 of 255) Serial # 4480
|
|
|
Armstrong #4 Sharpener Lot #189 (Sale Order 99 of 255) Serial # 14093, right hand sharpener RIGGING: $500
|
|
|
Armstrong Stretcher Roll Lot #190 (Sale Order 100 of 255) Serial # 16487, #4, includes hammering bench RIGGING: $300
|
|
|
Armstrong Auto Leveler Lot #191 (Sale Order 101 of 255) Model leveler, serial # 20242, meter reads 4056 hours RIGGING: $500
|
|
|
Allen Bradley Centerline Control Center Lot #192 (Sale Order 102 of 255) 6 rows of 16" columns RIGGING: $1500
|
|
|
Motor Starter Lot #193 (Sale Order 103 of 255) RIGGING: $200
|
|
|
Motor Starter Lot #194 (Sale Order 104 of 255) RIGGING: $200
|
|
|
2007 T.S. Manufacturing 3 Head Block Carriage Lot #195 (Sale Order 105 of 255) Serial # 17031, includes track, Inavec Stereo Scan 3D Dyna Vision log scanner, was installed in 2005 and mill shut down in 2007, has been stored inside since and is in very good condition, 1st lot of an entirety
|
|
|
AC/DC 150 HP Carriage Drive Lot #196 (Sale Order 106 of 255) Industrial electric service AC/DC carriage drive, to include electric control box, transformer, drive unit, cable drum, cable tightener an support rollers ***
|
|
|
Entirety Lot # 195 & 196 Lot #197 (Sale Order 107 of 255) With 10% raise
|
|
|
Prentice ATL425 Self Propelled Knuckleboom Lot #200 (Sale Order 108 of 255) Serial # 425P56929, 8.3 Cummins engine, good working condition
|
|
|
Prentice 600 Knuckleboom loader mounted on self propelled carrier Lot #200A (Sale Order 109 of 255) with clam type grapple
|
|
|
Prentice 410E Knuckleboom Mounted on Firetruck Chassis Lot #201 (Sale Order 110 of 255) Serial # 410P54238, Cummins engine in Prentice, Detroit diesel in truck, has bucksaw hookups, good working condition,
|
|
|
Prentice 280 D (sn: D280PR59748) Knuckleboom Lot #201A (Sale Order 111 of 255) loader with cummins T2/59 Engine on Evans Trailer
|
|
|
Prentice 325 Knuckleboom on Trailer Lot #202 (Sale Order 112 of 255) Cummins engine, meter reads 20,579 hours, runs and operates, has bucksaw hookups
|
|
|
Cat 515 Grapple Skidder Lot #203 (Sale Order 113 of 255) PIN 4LR00502, serial # 07233386, Cat 3304 engine, center pins are worn, has winch, meter reads 9465 hours, good working condition
|
|
|
*John Deere 640D Cable Skidder Lot #203A (Sale Order 114 of 255) PIN DW640DC507850, manual transmission, 88" blade, new paint, works good
|
|
|
*John Deere 648D Turbo Grapple Skidder Lot #203B (Sale Order 115 of 255) Serial # DH648DT507416, meter reads 3159 hrs. 96" 4 point blade, manual transmission, no parking brake, hydraulic pump is weak, good working condition
|
|
|
1985 John Deere 648D Single Arch Grapple Skidder Lot #204 (Sale Order 116 of 255) New paint job, ready for production, new clutch, rebuilt transmission, has new belts and hoses, engine runs good
|
|
|
1974 Cat 518 Cable Skidder (sn: 505954) Original Tires Lot #204A (Sale Order 117 of 255) size 23.1-26. Less than 3000 hours 1 OWNER
|
|
|
Timbco T-445 Hydro-Buncher Lot #205 (Sale Order 118 of 255) Serial # FT 4C-493-102694, meter reads 8102 hours, Cummins engine, good working condition
|
|
|
John Deere Track Loader Lot #206 (Sale Order 119 of 255) John Deere engine, meter reads 1176 hours, does not include grapple, runs and operates, will need some work to be ready for daily use
|
|
|
Cat D6 Dozer Lot #207 (Sale Order 120 of 255) Serial 3X483, Cat 3306 engine, meter reads 1634, clutch machine, 20" tracks, 126" 4-way blade
|
|
|
L70 H Volvo L70H (sn: DCEDL70HH0S622196) Lot #207A (Sale Order 121 of 255) wheel loader modified for cart extension. 20.5R25 Tires
|
|
|
Komatsu D53P Dozer (sn 0054) * Lot #207B (Sale Order 122 of 255) shows 2600 hours (not actual hours) has 11'6" tilt blade, track maybe 30-40% machine. Does run and operate as it should
|
|
|
Clark Michigan 175B Wheel Loader Lot #208 (Sale Order 123 of 255) Model 175B-GM, serial # 4270805, Detroit diesel, meter reads 1842 hours, includes 10' bucket, runs and operates
|
|
|
Volvo L90C Wheel Loader Lot #209 (Sale Order 124 of 255) PIN L90CB62662, has quick attach and 3rd valve, runs but has 1 bad cylinder, has cosmetic damage
|
|
|
Bucksaw Lot #210 (Sale Order 125 of 255) Model CTR42-1A, serial # 4722258, 13' bunk
|
|
|
Grapple Forks for Volvo Wheel Loader Lot #211 (Sale Order 126 of 255) 54" forks
|
|
|
Grapple Forks for Wheel Loader Lot #212 (Sale Order 127 of 255) Volvo quick connect off L120, 50" x 88" forks
|
|
|
Log Forks with a Bale Clamp Attachment Lot #212A (Sale Order 128 of 255) Quick Couple for either 950 E, 950 F or 950G
|
|
|
Log Forks with a Bale Clamp Attachment Lot #212B (Sale Order 129 of 255) Quick Couple for either 950 E, 950 F or 950G
|
|
|
Rotobec Grapple model 6606AB13 AT1.2 Lot #212C (Sale Order 130 of 255) .
|
|
|
Rotobec Grapple model 6606AB13 AT1.2 Lot #212D (Sale Order 131 of 255) .
|
|
|
Taylor TE-180K (sn: S-H4_22375) 18,000 lb forklift Lot #213A (Sale Order 132 of 255) 8' forks, Cummins Engine, Side shift, 10,0893 hours, dual wheel
|
|
|
Clark Forklift Big Tire, Short Triple mast, 5' forks Lot #214 (Sale Order 133 of 255) |
|
|
Kubota L275 tractor (sn: L275-10772) Lot #215 (Sale Order 134 of 255) 27 HP showing 583 hours, diesel motor, runs good
|
|
|
Kubota L245H High Clearance Tractor (sn: 11646) Lot #216 (Sale Order 135 of 255) showing 1967 hours, diesel motor, runs good
|
|
|
International 274 Tractor (sn: 2130007J008415) Lot #217 (Sale Order 136 of 255) showing 2642 hours, diesel engine
|
|
|
1995 Ford LTL9000 Truck, VIN # 1FDYA90X1SVA29669 Lot #220 (Sale Order 137 of 255) Year: 1995 Make: Ford Model: LTL9000 Vehicle Type: Truck Mileage: meter reads 180,797 miles Plate: Body Type: Trim Level: Drive Line: Engine Type: L6, 14.6L (893 CID); Turbo, serial # 2G0494T Fuel Type: Diesel Horsepower: 300-475HP Transmission:16 speed Eaton Fuller VIN #: 1FDYA90X1SVA29669 Features and Notes:GVWR 48,000 lb., Hendrickson suspension, full lock in rear, 3406C Cat TU-FLO 550 Compressor engine, UNDER 200,000 ORIGINAL MILES, aluminum headache rack, clean truck in excellent condition
|
|
|
1995 Mack CH613 Truck, VIN # 1M1AA14Y8SW044559 Lot #221 (Sale Order 138 of 255) Year: 1995 Make: Mack Model: CH613 Vehicle Type: Truck Mileage: 409,000 original miles, meter reads 21,433 Plate: Body Type: Trim Level: Drive Line: Engine Type: L6, 12.0L (728 CID) Fuel Type: Diesel Horsepower: 400HP (298kW) Transmission: 9 speed Eaton Fuller VIN #: 1M1AA14Y8SW044559 Features and Notes: Clean low mileage truck in very good condition
|
|
|
1995 Mack CH613 (VIN: 1M2AA14YXSW056322) Lot #221A (Sale Order 139 of 255) 526,125 miles, 23,577 hours, 9 speed Fuller transmission, Eaton read ends, wet kit, Jack brakes 11R24.5 Virgin tires with 80% wear on rear. Mack E7-400 engine
|
|
|
2000 Volvo ACL Autocar Log Truck, VIN # 4V5SC2JH8YN521028 Lot #222 (Sale Order 140 of 255) Year: 2000 Make: Volvo Model: ACL Autocar Vehicle Type: Truck Mileage: meter reads 23,183 Plate: Body Type: Trim Level: Drive Line: 6x4 Engine Type: L6, 14.0L (855 CID) Fuel Type: Diesel Horsepower: 425-474HP Transmission: Fuller RTO-76908LL VIN #: 4V5SC2JH8YN521028 Features and Notes: Cummins N14 engine, 18' log bunk, good working condition
|
|
|
2000 Volvo WG Log Truck, VIN # 4V5JC2UFXYN870665 Lot #223 (Sale Order 141 of 255) Year: 2000 Make: Volvo Model: WG Vehicle Type: Truck Mileage: meter reads 284,852 Plate: Body Type: Trim Level: Drive Line: 6x4 Engine Type: L6, 10.8L (661 CID) Fuel Type: Diesel Horsepower: 325-374HP Transmission: Fuller RTO-14909MLL VIN #: 4V5JC2UFXYN870665 Features and Notes: Cummins engine, 20' log bunk, full locking rears, good working condition
|
|
|
1995 Chevrolet C60 Kodiak Service Truck, VIN # 1GBE6H1J5SJ104060 Lot #223A (Sale Order 142 of 255) Year: 1995 Make: Chevrolet Model: C60 Kodiak Vehicle Type: Truck Mileage: meter reads 47,418 Plate: Body Type: Medium Conventional Cab & Chassis Trim Level: Drive Line: 4x2 Engine Type: L6, 6.6L (403 CID) Fuel Type: Diesel Horsepower: Transmission: VIN #: 1GBE6H1J5SJ104060 Features and Notes: includes generator, welder and air compressor
|
|
|
Open Top Chip Trailer VIN: 1H2Y04021GA017901 Lot #224 (Sale Order 143 of 255) 8' x 40' x 92" high, has tarp, wood floor, has title
|
|
|
Fruehauf Open Top Chip Trailer VIN: 1H2V04521KH052904 Lot #225 (Sale Order 144 of 255) 8' x 45' x 92" high, has tarp, wood floor, has title
|
|
|
Fruehauf Open Top Chip Trailer VIN: 1H2Y04521EA006001 Lot #226 (Sale Order 145 of 255) 8' x 45' x 8' high, has tarp, wood floor, has title
|
|
|
Fruehauf Open Top Chip Trailer Lot #227 (Sale Order 146 of 255) 8' x 45' x 8' high, has tarp, wood floor, no title, bill of sale only
|
|
|
Fruehauf Open Top Chip Trailer VIN: 1H2Y04524FA027202 Lot #228 (Sale Order 147 of 255) 8' x 45' x 8' high, has tarp, wood floor, has title, includes chips in trailer
|
|
|
Fruehauf Open Top Chip Trailer Lot #229 (Sale Order 148 of 255) 8' x 45' x 8' high, wood floor, no title
|
|
|
1997 Pitts Lt-42 (sn: 1PELT4222VP971002) Double Lot #230 (Sale Order 149 of 255) bunk log truck
|
|
|
1996 Pitts Lt-40 Double Bunk Log Trailer VIN: 1PELT4026T2980063 Lot #231 (Sale Order 150 of 255) |
|
|
1996 Eager Beaver 20 Ton tag trailer, 102" wide, VIN: 112H5V302TL046741 Lot #232 (Sale Order 151 of 255) 18' 6" deck, 5' beaver tail with 5' ramps
|
|
|
2002 Econoline 10 ton trailer VIN: 42EDPHK2921000822 Lot #233 (Sale Order 152 of 255) 96" wide, 18' deck, 5' beaver tail with 5' ramps
|
|
|
*1999 Transcraft trailer VIN: 1TTF4820XX1062105 Lot #234 (Sale Order 153 of 255) 48' long 96" wide aluminum deck and steel frame 285/75R 24.5 tires
|
|
|
Sullair Portable Air Compressor Lot #271 (Sale Order 154 of 255) Model 375DROJD, serial # 004112739, meter reads 3323 hours, 125 max PSI, John Deere diesel engine: model 4030TF, serial # CO 4037T144482, good working condition
|
|
|
Genset with Detroit Diesel Engine Lot #272 (Sale Order 155 of 255) Model 70837305, serial # 8VA300254, meter reads 1230 hours, good working condition, Delco A.C. Generator: model 37351, serial # 10 L 77, 250 KW, 450 HP, generator does not charge
|
|
|
Genset with Detroit Diesel Engine Lot #273 (Sale Order 156 of 255) Model 70837005, serial # 8VA381527, 318 HP, EPS generator: Brushless synchronous alternator, serial A76723AF, 150 KW, low hour unit that is in very good working condition
|
|
|
1994 Cummins Model LTA10-C 325 Power unit/ Lot #273A (Sale Order 157 of 255) hydraulic power unit, showing 8814 hours
|
|
|
Detroit 371 Power Unit Lot #273B (Sale Order 158 of 255) showing 703 actual hours. Used for sprinkler system pump, includes Peerless pump, Detroit Allison PTO, Fire system control panel, radiator and shrowd to add on
|
|
|
Detroit 671 Turbo Charged Power Unit # 06A043416 Lot #273C (Sale Order 159 of 255) showing 600 hours. Model 10637305 sold with hydraulic governor
|
|
|
Cat D343 Genset 1700+ hours (sn: 62B17265) Lot #273D (Sale Order 160 of 255) 285 KW MM Model SR-4 Engine has remote radiator
|
|
|
Detroit 671 Genset 175 KW (sn: 6A032365) Lot #273E (Sale Order 161 of 255) Model 10637305 Demco Generator, power unit runs great, condition of generator unknown
|
|
|
Lincoln Sae-400 DC welder Lot #273F (Sale Order 162 of 255) 400 amp with Detroit diesel power
|
|
|
Cummins Power Unit Lot #273G (Sale Order 163 of 255) Good working condition
|
|
|
Detroit Diesel Engine Lot #274 (Sale Order 164 of 255) Model 70837005, serial # 8VA381523, meter reads 362 hours, 318 HP, low hour unit that is in very good working condition
|
|
|
Worley welder Lot #274A (Sale Order 165 of 255) |
|
|
*Miller AC/DC 310 amp stick/mig/tig/ welder Lot #274B (Sale Order 166 of 255) Unit Number JH264502, with wire feeder, 22A machine, includes the bottle
|
|
|
*225V Thunder Bold Welder Lot #274C (Sale Order 167 of 255) |
|
|
3 Strands for Log Deck Lot #275 (Sale Order 168 of 255) 3 piece 30' strands, includes chain
|
|
|
Green Chain 3 Strand Lot #276 (Sale Order 169 of 255) 10' x 30', electric drive, rooftop chain
|
|
|
Vibrating Conveyor Lot #277 (Sale Order 170 of 255) 42" x 26', 36" pan, 6" sides, electric drive
|
|
|
Cleated Wheels Lot #277A (Sale Order 171 of 255) 24" diameter x 32" wide wheels for ring debarker (6 piece)
|
|
|
3 Strand Transfer Deck Lot #278 (Sale Order 172 of 255) 10' x 10' x 48" high, electric drive, incline deck
|
|
|
3 Strand Transfer Deck Lot #279 (Sale Order 173 of 255) 9' 6" x 21' x 40", C55 rooftop chain, no drive
|
|
|
4 Strands Log Deck Lot #280 (Sale Order 174 of 255) 34', 4 strands 3 have chain, no drive
|
|
|
3 Strand Mellott Log Deck Lot #281 (Sale Order 175 of 255) 8' 8" x 18', stop and load, hydraulic drive
|
|
|
Hosmer Rosserhead Debarker Lot #282 (Sale Order 176 of 255) Model V-208, machine # V.208.292, flat track, Mellott hydraulic unit with 7.5 HP motor
|
|
|
McDonough Resaw Lot #283 (Sale Order 177 of 255) Serial # 62M-186, 62" wheels, 15/16" meat on top wheel, 100 HP electric motor, 404T frame, discharge blower, mounted on sawdust box
|
|
|
*Bandsaw Blades Lot #283A (Sale Order 178 of 255) Fits McDonough resaw lot # 283, 7 pc. 9"-10" wide
|
|
|
Fulghum 60" Chipper Lot #284 (Sale Order 179 of 255) Model 606K, serial # F1F1L-1246, no power, includes discharge chute
|
|
|
Taylor Woodfired Boiler Lot #285 (Sale Order 180 of 255) 4' 8" x 13' x 90" high, electric motor on blower
|
|
|
HMC 2 Saw Trimmer Lot #286 (Sale Order 181 of 255) Model ET 10, serial # 62-79, 2 sliding saws
|
|
|
Rollcase with Kickers Lot #287 (Sale Order 182 of 255) 24" x 12' x 36" high, 5" x 18" rolls, 24" roll spacing, 1" shaft, air cylinder on kickers
|
|
|
Rollcase with Kickers Lot #288 (Sale Order 183 of 255) 24" x 17' x 36", 5 1/2" x 18" rolls, 24" roll spacing, 1 1/2" shaft, air cylinder on kickers
|
|
|
Crosby 32" Edger Lot #289 (Sale Order 184 of 255) Serial # 23270, 12' 6" x 5' x 6' 4" high, no drive, 3 blade 1 moving, 7' infeed
|
|
|
Power Feed for Line Bar Resaw Lot #289A (Sale Order 185 of 255) No drive
|
|
|
Rollcase Lot #290 (Sale Order 186 of 255) 44" x 17' x 45" high, 8 1/2" x 25" rolls, 30" roll spacing, 1 3/4 shaft, no drive
|
|
|
Rollcase Lot #291 (Sale Order 187 of 255) 36" x 13' x 4' high, 8 1/2" x 25" rolls, 30" roll spacing, 1 3/4" shaft, pop-up stop with air cylinder
|
|
|
Waste Conveyor Lot #292 (Sale Order 188 of 255) 4' x 13', 19" pan, 17 1/2" paddles, 7" sides, with drag chain, electric drive
|
|
|
Corinth Trim Saw Lot #293 (Sale Order 189 of 255) Serial # 090031, 7' x 22' x 64" high, 2 moving blades, electric drive, 24" blades
|
|
|
Montgomery Blo-Hog Lot #294 (Sale Order 190 of 255) Model 20-50PM34, serial # 1478, 6' x 9' 6" x 7' 6" high
|
|
|
Concave Belt Conveyor Lot #295 (Sale Order 191 of 255) 80" x 8', 28" belt, electric drive
|
|
|
5 Strand Unscrambler Lot #296 (Sale Order 192 of 255) 7' x 12' x 4' 6", electric drive, almost new
|
|
|
Logdeck Shaft Lot #297 (Sale Order 193 of 255) 3" x 12' shaft, 1 1/2" x 9' 6" shaft with bearings and stops, 3 sprockets and unloaders
|
|
|
Rollcase Lot #298 (Sale Order 194 of 255) 5' x 19' x 28", 8" x 31" rolls, 36" roll spacing, 2 1/2" shaft, no drive
|
|
|
Rens Metal Detector Lot #299 (Sale Order 195 of 255) Search coil serial # 080999, type Radax A60.40, 6' x 19' x 7' trough, 20" belt, electric drive
|
|
|
5 Strand Transfer Deck Lot #300 (Sale Order 196 of 255) 10' x 13', H78B rooftop chain
|
|
|
3 Strand Transfer Deck Lot #301 (Sale Order 197 of 255) 10' 6" x 14', Tulsa winch drive, C55B rooftop chain
|
|
|
Klamath 7' Head Rig Lot #302 (Sale Order 198 of 255) Serial # 2909, machine # 7' 9" Extra R.H. Bandmill No. 18, 7' wheels, steel slat off bearer web, includes powerfeed
|
|
|
Line Bar Powerfeed Lot #302A (Sale Order 199 of 255) No drive
|
|
|
*Bandsaw Blades Lot #302B (Sale Order 200 of 255) Fits Klamath headrig lot # 302, 10"-12" wide x 40' 6" long, 14 pc.
|
|
|
McDonough Rollcase Lot #303 (Sale Order 201 of 255) 3' x 22' x 4' high, 8 1/2" x 24", 42" roll spacing, 2" shaft, pop up chain turners, onboard cant turners and board flipper, infeed for resaw
|
|
|
3 Strand Log Deck with Stop 'N Load Lot #304 (Sale Order 202 of 255) 10' 6" x 18', Tulsa drive with hydraulic
|
|
|
Newman K-20HD Trimsaw Lot #305 (Sale Order 203 of 255) 6' x 25' x 4', 20" blades, 3 moving saws, 20' capacity
|
|
|
*Whitney Straight-Line Rip Saw Lot #305A (Sale Order 204 of 255) Model K-414 SAW, serial # 18359, electric drive
|
|
|
*Cutoff Saw Lot #305B (Sale Order 205 of 255) Electric drive, infeed and outfeed, air pop up stops
|
|
|
3 Strand Log Deck Lot #306 (Sale Order 206 of 255) 10' 6" x 20' x 50", electric drive
|
|
|
Rollcase with Dual Direction Transfer Lot #307 (Sale Order 207 of 255) 64" x 19' x 36" high, 6 1/2" x 36" rolls, 30" roll spacing, 1 3/4 shafts, hydraulic motor on transfers, gearbox but no motor on rolls
|
|
|
36" Edmiston Edger Lot #308 (Sale Order 208 of 255) 2 saw, 2 moving blades, 8' infeed table, no power, 30" 6 groove pulley, 4 3/8" shaft
|
|
|
Frick Timber Tiger Carriage Lot #309 (Sale Order 209 of 255) 15' carriage, 4 head blocks, air dogs and setworks, track is 34" center to center x 48' long, Husk with 8' slab dump, 20" belt
|
|
|
Edminston 4 Head Block Portable Sawmill Lot #309A (Sale Order 210 of 255) All hydraulic set, friction belt feed works. Built to operate with Power Unit
|
|
|
5 Strand Green chain Lot #310 (Sale Order 211 of 255) 10' 8" x 46' x 24' high, no drive
|
|
|
3 Strand Green chain Lot #311 (Sale Order 212 of 255) 10' x 42' x 16", C55 rooftop chain, no drive
|
|
|
4 Strand Transfer Deck Lot #312 (Sale Order 213 of 255) 13' x 17' x 57" high, H130 chain, no drive
|
|
|
4 Strand Unscrambler Lot #313 (Sale Order 214 of 255) 7' x 12' x 42", electric drive
|
|
|
2 Strand Log Deck Lot #314 (Sale Order 215 of 255) 8' x 15' x 4' high, no drive
|
|
|
Belt Waste Conveyor Lot #315 (Sale Order 216 of 255) 36" x 17', 16" belt, electric drive
|
|
|
2 Strand Transfer Deck Lot #316 (Sale Order 217 of 255) 8' x 21' 6" x 57" high, no chain, no drive
|
|
|
Rollcase Lot #317 (Sale Order 218 of 255) 64" x 33' x 4' high, 8 1/2" x 24" rolls, 42" roll spacing, 2" shaft
|
|
|
Debarker Head Bracket Lot #318 (Sale Order 219 of 255) Arm with bearings and air cylinder for debarker head mount
|
|
|
Rollcase with Pop-Up Transfer Lot #319 (Sale Order 220 of 255) 6' x 20' x 38", 4' 8" pop-up transfer chain, 8 1/2" x 30" rolls, electric drive, 2" shaft, 36" roll spacing
|
|
|
58" 6 Knife Precision Chipper Lot #320 (Sale Order 221 of 255) Size 58:15, serial # C366, 150 HP motor, 1175 RPM, 445 TZ frame
|
|
|
Hydraulic Power Pack Lot #321 (Sale Order 222 of 255) 7.5 HP electric motor
|
|
|
Hydraulic Power Pack Lot #322 (Sale Order 223 of 255) 10 HP electric motor
|
|
|
Grapple Lot #323 (Sale Order 224 of 255) For knuckle boom
|
|
|
36" Dust Blower Lot #325 (Sale Order 225 of 255) Serial # 70-0373, no drive
|
|
|
Hydraulic Power Pack Lot #326 (Sale Order 226 of 255) 20 HP electric motor
|
|
|
Hydraulic Power Pack Lot #327 (Sale Order 227 of 255) 25 HP electric motor
|
|
|
Hydraulic Power Pack Lot #328 (Sale Order 228 of 255) Baldor 20 HP electric motor
|
|
|
Hydraulic Power Pack Lot #329 (Sale Order 229 of 255) Model 632-6.5, serial # 592709, 3/4 HP electric
|
|
|
32" Chain Log Turner Lot #330 (Sale Order 230 of 255) Carriage parts
|
|
|
48" Bar Type Cutoff Lot #331 (Sale Order 231 of 255) 4' bar, 7 1/2 HP electric
|
|
|
Scissor Lift Presto Lot #332 (Sale Order 232 of 255) 32" x 103", 42" rail
|
|
|
Scissor Lift Lot #333 (Sale Order 233 of 255) 32" x 103", 42" rail, 2500 lb. lift
|
|
|
Scissor Lift Presto Lot #333A (Sale Order 234 of 255) 32" x 103"
|
|
|
Scissor Lift Lot #334 (Sale Order 235 of 255) 4' x 10", 12,000 lb. lift
|
|
|
Vibrating Conveyor Lot #335 (Sale Order 236 of 255) 22" x 20', 18" pan, 8" sides, electric drive
|
|
|
58" Precision Chipper Lot #336 (Sale Order 237 of 255) Serial C567, size 58:15, 6 knife
|
|
|
*Morbark Chipper Lot #336A (Sale Order 238 of 255) Model 6-58, serial # W-164, good condition
|
|
|
*Precision Chipper Lot #336B (Sale Order 239 of 255) Model 58-15, serial # C-2065, 6 knife, 3 are blocked
|
|
|
Fulghum Vibrating Conveyor Lot #337 (Sale Order 240 of 255) 38" x 52' total, 24" pan, 9" sides, dust screen, drive but no power
|
|
|
Starter Control Box Lot #338 (Sale Order 241 of 255) 4' x 6', includes starters and breakers
|
|
|
Hydraulic Power Pack Lot #339 (Sale Order 242 of 255) Directional valve, electric motor
|
|
|
New Vibrating Conveyor Sections Lot #340 (Sale Order 243 of 255) 37" x 20' total, 24" pan, 10" sides, no drive, frame parts, fits Webster FSH
|
|
|
Shaft with Sprocket Lot #341 (Sale Order 244 of 255) 2 3/16" x 21', 3' loading arms with chain
|
|
|
Auger Lot #342 (Sale Order 245 of 255) 30" x 36', 24" auger, no drive
|
|
|
*60'x12" Auger with Dodge speed reducer Lot #342A (Sale Order 246 of 255) no motor
|
|
|
Tire Chains for Skidder Lot #343 (Sale Order 247 of 255) 23.1 x 26 tire chains, good condition, 2 per set
|
|
|
Tire Chains for Skidder Lot #344 (Sale Order 248 of 255) 23.1 x 26 tire chains, good condition, 2 per set
|
|
|
2 skidder tires mounted on Franklin Rims Lot #345 (Sale Order 249 of 255) size 28L-26
|
|
|
Red Oak Tree Wood Burner Heat Lot #346 (Sale Order 250 of 255) .
|
|
|
MF5000 Heat Master Wood BurningHeater Lot #347 (Sale Order 251 of 255) .
|
|
|
Green Oak Trekk Wood burning heater Lot #348 (Sale Order 252 of 255) .
|
|
|
Approx. 22' Drag chain roll case Lot #349 (Sale Order 253 of 255) .
|
|
|
15' spiral rollcase, (6) 30"x8" rolls, back stop Lot #350 (Sale Order 254 of 255) .
|
|
|
9'6" Belt conveyor. 24" belt No Drive Lot #351 (Sale Order 255 of 255) has a 22" belt on it
|
|