|
|
Information Lot Lot #00 (Sale Order 1 of 81) Buyers have 30 days to remove equipment. ALL EQUIPMENT IS REMOVED AND READY TO LOAD ON YOUR TRAILER. TAKE ADVANTAGE OF NO RIGGING COSTS! Everything sells absolute. No reserves. Taking consignments of sawmill, forestry, and rolling stock.
|
|
|
Heavy Equipment Key Set 24 Keys Lot #96 (Sale Order 2 of 81) Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Shipping available for $20
|
|
|
Manual Sealless Steel Strapping Tool Lot #97 (Sale Order 3 of 81) Model A333, works for 1/2", 5/8" or 3/4" banding, new in box.Shipping available for $30
|
|
|
Bevel Buddy Sharpener Lot #98 (Sale Order 4 of 81) 12 V, like new chipper knife grinder, cordless with 2 batteries and charger
|
|
|
Saw Grinder Lot #99 (Sale Order 5 of 81) Atlas hand filer
|
|
|
Rosserhead Debarker Lot #100 (Sale Order 6 of 81) Hydraulic motor on head, Mellott head, slant track, pentagram arm, chain carriage drive, support steel catwalk on end of debarker, joystick controls, includes all control valves, owner will need 1 week notice in order to load this debarker. $200 loading fee. first lot of an entirety
|
|
|
Deutz 149 H.P. Diesel Motor Lot #101 (Sale Order 7 of 81) M.N. BF 4M 1013 EC, serial # 11898013, manufacture date 2016, control panel, includes battery, meter reads 2191 hours
|
|
|
Hydraulic Pump and Tank Lot #102 (Sale Order 8 of 81) 48" x 30" x 48" tank, includes all hoses to debarker valves
|
|
|
Vibrating Conveyor Lot #103 (Sale Order 9 of 81) 26", 18" pan, 4" sides, 22' long, hydraulic drive
|
|
|
Concave Belt Conveyor Lot #104 (Sale Order 10 of 81) 36" wide, 24" belt, 40' long, hydraulic drive
|
|
|
Debarker Control Cab Lot #105 (Sale Order 11 of 81) 5' x 5' x 7', A/C, includes structure around cab, includes all controls, shop built with insulated panels
|
|
|
Entirety Lot 100-105 Lot #106 (Sale Order 12 of 81) With 10% raise
|
|
|
3-Stand Log Deck Lot #107 (Sale Order 13 of 81) 8' x 20', gear box is hydraulic drive, support structure to ground
|
|
|
Cleereman 4 HB Carriage Lot #108 (Sale Order 14 of 81) Model 36, serial # 36-75-73, 4 head block, 15' carriage, air dogs, air setworks, oil tank for track, cant kickers, controls in cab, first lot of an entirety
|
|
|
Carriage Track and Frame Lot #109 (Sale Order 15 of 81) 50" center to center, 45' long, support to ground
|
|
|
Carriage Drive Lot #110 (Sale Order 16 of 81) Hydraulic motor, newer unit, directional valve
|
|
|
Carriage Feed Lot #110A (Sale Order 17 of 81) 48" x 30" x 24" hydraulic pack
|
|
|
Cleereman Husk Lot #111 (Sale Order 18 of 81) 56" saw on husk, 42" top saw, 7' x 8' frame, 6" x 26" off bear belt, 22" belt, top saw drive off of mandrel shaft
|
|
|
Saw Cab Lot #112 (Sale Order 19 of 81) 56" x 8" x 7', includes controls, shop built with insulated panels, includes catwalk around cab, A/C unit
|
|
|
Entirety Lot 108-112 Lot #113 (Sale Order 20 of 81) With 10% raise
|
|
|
Mellott 3-Strand Log Deck Lot #114 (Sale Order 21 of 81) Item # 8611738, 10' x 22' x 52" high, 4' no skid, stop and load Tulsa winch drive
|
|
|
Mellott 48" Log Turner Lot #115 (Sale Order 22 of 81) Heavy duty, hydraulic drive, control in cab, electric over hydraulic
|
|
|
Caterpillar Power Unit Lot #116 (Sale Order 23 of 81) Model 3406D-DI, serial # 6TB03884, WPT clutch, 400 H.P. includes battery, only 2200 hours, good strong unit.
|
|
|
Hydraulic Tank Lot #117 (Sale Order 24 of 81) 40" x 24" x 36"
|
|
|
Slab Drop Belt Lot #118 (Sale Order 25 of 81) 28" x 22', 24" belt, hydraulic drive, hydraulic lift, hydraulic lift control valve
|
|
|
Drag Chain Conveyor Lot #119 (Sale Order 26 of 81) 18" x 27', hydraulic drive
|
|
|
Vibrating Conveyor Lot #120 (Sale Order 27 of 81) 25", 19" pan, 4" plus 6" add-on sides, 50' hydraulic drive, metal catching magnet, shaker screen, blower chute
|
|
|
Baldor Electric Motor Lot #122 (Sale Order 28 of 81) 25 HP, on mount
|
|
|
Saw Blade Lot #123 (Sale Order 29 of 81) 56" F8 style teeth
|
|
|
Saw Blade Lot #124 (Sale Order 30 of 81) 56" F8 style teeth
|
|
|
Saw Blade Lot #125 (Sale Order 31 of 81) 56" F8 style teeth
|
|
|
Saw Blade Lot #126 (Sale Order 32 of 81) 56" F8 style teeth
|
|
|
Saw Blade Lot #127 (Sale Order 33 of 81) 56" F8 style teeth
|
|
|
Saw Blade Lot #128 (Sale Order 34 of 81) 56" F8 style teeth
|
|
|
Precision 48" Chipper Lot #129 (Sale Order 35 of 81) Serial C-3226, size 48-11, 6 knife but 3 are blocked, includes pipe with elbow to cyclone, 3 knife, no power, first lot of an entirety
|
|
|
Precision Chip Shaker Screen Lot #130 (Sale Order 36 of 81) Model 5X5, serial # S1660, 3 HP electric motor
|
|
|
Phelps 24" Chip Blower Lot #131 (Sale Order 37 of 81) Model 36/W, serial # 107862C, 12" x 18" outlet, 20 HP electric motor, 2 chutes
|
|
|
Precision Chip Cyclone Lot #132 (Sale Order 38 of 81) 48" x 48"
|
|
|
Entirety Lot 129-132 Lot #133 (Sale Order 39 of 81) With 10% raise
|
|
|
Leeson Electric Motor Lot #134 (Sale Order 40 of 81) 60 HP
|
|
|
24" Chip Blower Lot #135 (Sale Order 41 of 81) With dual chute divider attachment, 20 HP electric
|
|
|
Chipper Pipe Adapter Lot #136 (Sale Order 42 of 81) 11 1/2" x 16" square to 12" round
|
|
|
Precision Chip Shaker Screen Lot #137 (Sale Order 43 of 81) Model PCS-55, serial # S-1430, support legs to I beam, no motor, 5' x 5' screen
|
|
|
I Beam Frame for Chippac Lot #138 (Sale Order 44 of 81) 80" x 166" with cross sections, 8" x 8" beam
|
|
|
Cleereman 4 Head Block Carriage Lot #139 (Sale Order 45 of 81) Model 38, serial # 38-851 R16, air controlled set, 20' long x 8' wide, 3 Brownsville turners, cant kickers, control box with cable, needs 1 bearing replaced, completely rebuilt by Cleereman in 2016, good solid carriage
|
|
|
Carriage Frame Lot #140 (Sale Order 46 of 81) 62" x 85' long, bump stops on ends
|
|
|
3 Strand Green Chain Lot #141 (Sale Order 47 of 81) 8' x 77' long, hydraulic drive gear box, Rooftop chain, rebuilt, will be fully assembled by sale time, very nice green chain
|
|
|
Mat Drill Lot #142 (Sale Order 48 of 81) Honda 6X 390 electric start, 32" x 90" long, 50 1/2 long drill, 1" gauge
|
|
|
John Deere 437C Knuckleboom Lot #144 (Sale Order 49 of 81) PIN T0437CX171716, model 437C, good running condition, hand fuel transfer pump, heat and AC, Rotobec grapple, meter reads 13,435 hours, joystick controls, mounted on Pitts trailer, bucksaw hookups
|
|
|
CTA Bucksaw Lot #144A (Sale Order 50 of 81) 16' rack, 5' saw blade
|
|
|
Prentice 310E Knuckleboom Lot #145 (Sale Order 51 of 81) Model 992299, serial # 7207354, meter reads 1767 hours, works and runs good, 5.9 Cummins, has broken axle and will need new tires, rebuilt cylinders on down rigger
|
|
|
Timberjack 330B Knuckleboom Lot #146 (Sale Order 52 of 81) Model 330B, serial # WC3308X011151, John Deere engine, good running loader, trailer mounted, joystick controls, remote hookup, meter reads 10,928 hours, 1 glass missing, has small oil leak
|
|
|
2003 Cat TH560B Telehandler Lot #147 (Sale Order 53 of 81) ID # CATTH560TSLG00254, joystick controls, 10,000 lb rating, outriggers, good running machine, meter reads 5878, quick attach system
|
|
|
Forks Quick Attach for Lot 147 Lot #147A (Sale Order 54 of 81) 4" x 48" forks, tilting cylinder
|
|
|
Bucket Quick Attach for Lot 147 Lot #147B (Sale Order 55 of 81) 7' wide, 3 yard
|
|
|
2005 Cat 525B Grapple Skidder Lot #148 (Sale Order 56 of 81) PIN Cat0525BC3KZ01842, heat and A/C currently not working, good running machine, 30.5L-32 tires, meter reads 14,766, grapple opens to 10'. 1st and 3rd gear don't work, seller has always used it this way. No other issues
|
|
|
Tire Chains Lot #148A (Sale Order 57 of 81) Fits tire size 30.5L-32, 2 piece new, 2 piece used
|
|
|
2006 Valmet 425EX Track Feller Buncher Lot #149 (Sale Order 58 of 81) Model 425EX, serial NT4C-2787-D53I06, year 2006, heat and A/C in cab, only 600 hours on new under carriage, 24" tracks, Cummins engine, 2 new finial drives, meter reads 3020 hours, joystick controls, cutter head model GN5300, serial # 3052, year 2015, automatic fire extinguisher system. Good working condition
|
|
|
2002 US Cargo Trailer Lot #150 (Sale Order 59 of 81) Model USL716TA2, VIN 4X4UUS6292W008215, GVWR # 7000LBS, #US 008215, 16' 8", 7' wide, 38" tongue, double axle, 5/16 coupler, 195 1/2" x 81" wide x 74" cargo space, cable release drop down tailgate 76" x 68", 65" x 37" side door, 13 1/4" x 13 1/4" air vent, contents not included
|
|
|
Hyster Forklift Lot #158 (Sale Order 60 of 81) Model 60, 4" x 46" forks, 7.00-15 solid front tires, solid rear tires, 7' 2 stage mast, 6000 lb. rated, meter reads 9146, side shift, runs and operates as it should
|
|
|
26' Camper Lot #159 (Sale Order 61 of 81) Propane heat, A/C, nice interior, solid camper
|
|
|
Pallet of Carriage Parts Lot #160 (Sale Order 62 of 81) Set gear boxes, cylinders, box of springs, seals, bearings
|
|
|
Steel File Cabinet with Contents Lot #161 (Sale Order 63 of 81) 25" x 18" x 52 1/2", 4 drawers, filters for wheel loader
|
|
|
Crate of Belt & Rolls Lot #162 (Sale Order 64 of 81) 1/4" thick x 24" wide, length unknown, rolls for elevator belt conveyor, bearing housing
|
|
|
Wood Lathe Lot #163 (Sale Order 65 of 81) 52" x 20" wide, works, no drive
|
|
|
Pallet of Filters, Jacks, Washers Lot #164 (Sale Order 66 of 81) Oil pan, Dahl 201 filters, 3 jacks, drive unit for vibrating conveyor, box of 2 1/4" washers
|
|
|
Pallet of Assorted Belts Lot #165 (Sale Order 67 of 81) New, assorted sizes, storage hooks, rain gutter, elbows, exhaust for wheel loader engine
|
|
|
Pallet of Grease Guns, Paddles Lot #166 (Sale Order 68 of 81) 2 grease guns, 17" drag chain conveyor paddles, 2 Atlas hand filers
|
|
|
Pallet of Filters Lot #167 (Sale Order 69 of 81) 42" cant hook, box of square spikes, wheel loader filters, 10,000 series hydraulic motor, Simonds shanks for saw blade
|
|
|
Pallet of Chipper Parts Lot #168 (Sale Order 70 of 81) Knives, paddles, new knife holders, 3 belt pulley- 28" diameter, 1/2" belt slots, fit 3 7/8" shaft
|
|
|
Pallet of Chains and Extra Parts Lot #169 (Sale Order 71 of 81) Parts for carriage, log turner, sprockets, circle saw teeth puller, assorted roller chains, air filters
|
|
|
Reckart Hydraulic Pack Lot #170 (Sale Order 72 of 81) 21 1/2" x 13 1/2" x 28 5/16" high, no motor
|
|
|
Hydraulic Tank and Stand Lot #171 (Sale Order 73 of 81) 28" x 18 1/4" x 20" tank, 28" x 19" x 18 3/4" stand
|
|
|
Grapple for Knuckleboom Lot #172 (Sale Order 74 of 81) 20" wide grapples, no rotating motor
|
|
|
Pallet of Swamp Mat Bolts Lot #173 (Sale Order 75 of 81) 46 3/4" long, 3/4" thick, approx. 200 count
|
|
|
Pallet of Swamp Mat Bolts Lot #174 (Sale Order 76 of 81) 46 3/4" long, 3/4" thick, approx. 200 count
|
|
|
3 Strand Green Chain Lot #175 (Sale Order 77 of 81) 13' 6" long x 77" wide x 31" high, Rooftop style chain, hydraulic drive
|
|
|
Pallet of Chain Lot #176 (Sale Order 78 of 81) 67H
|
|
|
Belt Conveyor Lot #177 (Sale Order 79 of 81) 36" x 21', 32" pan, 6 1/2" sides, 30" belt, electric drive
|
|
|
Belt Conveyor Lot #178 (Sale Order 80 of 81) 21" x 34', 19" pan, 17 1/2" belt, electric drive
|
|
|
Streamliner Belt Conveyor Lot #179 (Sale Order 81 of 81) 41" x 30', electric drive, 34" belt, reaches to 2nd story
|
|