|
|
PLEASE READ BEFORE BIDDING! Lot #1 (Sale Order 1 of 391) This is Auction #1
Preview Date: Monday - June 19, 2023 - 12:00-2:00 PM
Removal Date: Tuesday - June 27, 2023 - 12:00-4:00 PM Pickup Location: 8389 S. Pricetown Rd. Berlin Center, OH 44401 Online Terms: Visa, MasterCard, and Wire Transfer accepted. Wire transfers required on invoices over $2,500. 15% buyer?s premium on all sales. Information is believed to be accurate but not guaranteed. NOTE: Do not bid on this lot. This lot is not being sold. EVENT: Randall Kiko - 21005 |
|
|
PLEASE READ BEFORE BIDDING! Lot #2 (Sale Order 2 of 391) DO NOT BID ON THIS LOT!!!
This is Auction #1
Sellers Notes: Inspection: Your personal inspection is recommended. Your personal inspection is your only guarantee! Loading: We will load all heavy items at NO charge. We will gladly load any heavy items after the first hour of pick up. This will allow time for small items to be removed first. Shipping: We will ship all items except Ammunition. Contact the seller at 330-502-0066. Minimum handling/packaging price is $20.00. Shipping charges will be paid directly to Craig Donges. Payment terms are Postal Money Order or Zelle. No other electronic payments accepted. If you can not do either, I understand. Shipping/packaging/handling/insurances charges will be paid in full prior to shipping. It will take some time to ship. We are not Amazon. You will not have your shipment tomorrow. Thanks for reading this and good luck on bidding! |
|
|
Wheels: 4 - 19 inch Model A Ford wheels Lot #3 (Sale Order 3 of 391) |
|
|
Wheels: 5 - 19 Inch Model A Ford wheels Lot #4 (Sale Order 4 of 391) |
|
|
Wheels: 4 - 19 inch Model A Ford wheels Lot #5 (Sale Order 5 of 391) |
|
|
Wheels Lot #6 (Sale Order 6 of 391) 3 - 19 inch Ford Model A wheels
2 - 16 inch Ford V-8 wheels 1 - 40 Ford disc wheel |
|
|
Wheels: 4 - 16 inch Ford V-8 wheels Lot #7 (Sale Order 7 of 391) |
|
|
Wheels: 4 - 16 inch Ford V-8 wheels Lot #8 (Sale Order 8 of 391) |
|
|
Wheels: 4 - 16 inch Ford V-8 wheels, with trim rings and 1 hub cap Lot #9 (Sale Order 9 of 391) |
|
|
Wheels: 4 - 16 inch Ford V-8 wheels Lot #10 (Sale Order 10 of 391) |
|
|
Wheels: 4 - 16 inch Ford V-8 wheels Lot #11 (Sale Order 11 of 391) |
|
|
Axles: 2 - Ford Model A rear axles Lot #12 (Sale Order 12 of 391) |
|
|
Plywood/Steel siding: Bunk of various sized OSB sheeting. Several full sheets. A few Lot #13 (Sale Order 13 of 391) |
|
|
Dimensional Lumber: New lumber up to 16 ft long Lot #14 (Sale Order 14 of 391) |
|
|
Conduit: A group of miscellaneous conduit. Mostly 10 ft long, up to 4 inch diameter Lot #15 (Sale Order 15 of 391) |
|
|
Treated Post: Various sizes, up to 21 ft long Lot #16 (Sale Order 16 of 391) |
|
|
Power King Economy 24 HP. Was running and mowing. Lot #17 (Sale Order 17 of 391) Had a clutch problem and was parked inside. This is a clean little tractor.
|
|
|
2 - 33 lb Steel propane tanks. Untested. Lot #18 (Sale Order 18 of 391) |
|
|
5 - New trusses. about 11 ft bottom chord. 12/12 pitch. Stored indoors Lot #19 (Sale Order 19 of 391) |
|
|
Large basket with stake pockets and collapsible sides. Heavy! 48 inch X 108 inch X 36 inch tall. Lot #20 (Sale Order 20 of 391) |
|
|
Guard Rail: 26' ft wide, 5 ft 5 inch tall. Three heavy post with bottom plates Lot #21 (Sale Order 21 of 391) (Remember, we will load at no charge!)
|
|
|
Shop built Pickett Twister. Lot #22 (Sale Order 22 of 391) Used for making ornamental railing. 3 phase, working.
|
|
|
Bandsaw: Marvel model 8 travelling head saw. Removed from a working shop. 3 phase. Lot #23 (Sale Order 23 of 391) |
|
|
Hardinge Speed Lathe. DV59 Has a steady rest and a 5C collet closer. Parts, restore or use. Lot #24 (Sale Order 24 of 391) |
|
|
Belt Grinder: Wilton Square Wheel. 115 V. Starts, runs and the belt track. 2 inch X 72 inch Lot #25 (Sale Order 25 of 391) |
|
|
Steel: Black and Galvanized. Angle, channel and beams. Lengths to 36 ft Lot #26 (Sale Order 26 of 391) |
|
|
Beams: W10 X 19 lb beams. 40 ft long New material. straight Lot #27 (Sale Order 27 of 391) |
|
|
Channel Steel: 10 inch. 6 Pcs. Up to 112 Inch long. Straight. Lot #28 (Sale Order 28 of 391) |
|
|
Channel Steel: 10 inch . 4 Pcs. Up to 112 inch long Lot #29 (Sale Order 29 of 391) |
|
|
Plate Steel: Various NEW plate steel drops. Up to 1/2 inch thick Lot #30 (Sale Order 30 of 391) |
|
|
Bucket: Old scalding kettle or bucket. 17 inch diameter. Lot #31 (Sale Order 31 of 391) |
|
|
Channel steel: 10 inch. 3 Pcs. up to 16 ft long. Lot #32 (Sale Order 32 of 391) |
|
|
Channel steel: 10 inch 3 Pcs. Up to 20 ft long Lot #33 (Sale Order 33 of 391) |
|
|
Channel Steel: 2 pcs. HEAVY. 10 inch and 12 inch. up to 15 ft long. Lot #34 (Sale Order 34 of 391) |
|
|
Beam: 18 1/2 inch and over 13 ft long. Straight and clean. Lot #35 (Sale Order 35 of 391) |
|
|
Beam: 12 inch X 117 inch Straight. Lot #36 (Sale Order 36 of 391) |
|
|
Steel Studs: 100 Pcs. 3 5/8 inch, 9 ft 0 inch long. Galvanized steel. Clarke Dietrich. Lot #37 (Sale Order 37 of 391) |
|
|
Steel Studs: 100 Pcs. 3 5/8 inch, 9 ft 0 inch long. Galvanized steel. Clark Dietrich Lot #38 (Sale Order 38 of 391) |
|
|
Steel Studs: 60 Pcs. 3 5/8 inch, 9ft 0 inch long. Galvanized steel. Clark Dietrich. Lot #39 (Sale Order 39 of 391) |
|
|
Steel Studs: 60 Pcs. 3 5/8 inch, 9 ft 0 inch long. Galvanized Steel. Clark Dietrich Lot #40 (Sale Order 40 of 391) |
|
|
Large bundle of 1/2 inch rebar. About 9ft long. Nice and clean. Been stored indoors. Lot #41 (Sale Order 41 of 391) 2 bags of wire ties and 2 twisters.
|
|
|
4 - 4:80-12, 4 ply trailer tires. Lot #42 (Sale Order 42 of 391) |
|
|
6 - Various sized angle plates Lot #43 (Sale Order 43 of 391) |
|
|
Rebar Chairs: 6 bags, 1,000 per bag. 6,000 Pcs. Lot #44 (Sale Order 44 of 391) |
|
|
Rebar chairs: 1 bag of 2,500. 3 bags of 1,000. Total of 5500 Pcs. Lot #45 (Sale Order 45 of 391) |
|
|
4 - New 6 inch X 10 ft PVC sewer pipe Lot #46 (Sale Order 46 of 391) |
|
|
Vibratory Finisher: Rampe, Cleveland Ohio. 3 phase. Lot #47 (Sale Order 47 of 391) Untested, but came from a working shop.
|
|
|
Vibratory Media: Full 55 gallon drum of light-brown rabbit pellet sized media. Lot #48 (Sale Order 48 of 391) |
|
|
Vibratory Media: 2/3 of a 55 gallon drum of larger sized media Lot #49 (Sale Order 49 of 391) Great size that does not plug small holes.
|
|
|
Vibratory Media Lot #49A (Sale Order 50 of 391) 2 large totes with light brown angle cut cylinder shapes 3/4in diameter |
|
|
Job Box on wheels. 29 inch X 48 ft X 36 inch. Lot #50 (Sale Order 51 of 391) |
|
|
2 matching heavy steel saw horses. 29 inch tall and 40 inch wide. Lot #51 (Sale Order 52 of 391) |
|
|
New 6inch black perforated drain tile. One full roll, one long piece. Lot #52 (Sale Order 53 of 391) Also a catch basin with the top grating. All new product.
|
|
|
2 Pcs. Rubbermaid Brute trash can. Probably 55 gallon size Lot #53 (Sale Order 54 of 391) |
|
|
Gear Reducer: Boston Gear 115 Volt, foot pedal. Untested. Lot #54 (Sale Order 55 of 391) |
|
|
Steel table: 5 ft X 20 ft long. Heavy beam frames. 1/4 inch plate steel tops. Lot #55 (Sale Order 56 of 391) NO legs. 5 crossmembers. we will load.
|
|
|
Steel Table: 5 ft X 20 ft long. Heavy beam frames. 1/4 inch plate steel tops Lot #56 (Sale Order 57 of 391) NO legs. 6 crossmembers. We will load
|
|
|
Steel table: 5 ft X 20 ft long. Heavy beam frames. 1/4 inch plate steel tops Lot #57 (Sale Order 58 of 391) NO legs. 6 crossmembers. We will load.
|
|
|
Steel table: 5 ft X 20 ft long. Heavy beam frames. 1/4 inch plate steel tops Lot #58 (Sale Order 59 of 391) NO legs. 5 crossmembers. We will load.
|
|
|
Steel table: 5 ft X over 9' inch long. Heavy beam frames. 1/4 inch plate steel tops Lot #59 (Sale Order 60 of 391) NO legs. 3 crossmembers. We will load.
|
|
|
4 piece box channel. great for table lets Lot #60 (Sale Order 61 of 391) |
|
|
7 pieces of channel and beams, great for table legs Lot #61 (Sale Order 62 of 391) |
|
|
Sandstone grindstone. 20 inch X 4 inch. Family owned over 75 years. Engraved 184 Lot #62 (Sale Order 63 of 391) |
|
|
Pintle hitch, drop hitch, and Reese hitch parts Lot #63 (Sale Order 64 of 391) |
|
|
Misc. Rese type hitches Lot #64 (Sale Order 65 of 391) |
|
|
Reese type with Torsion bars Lot #65 (Sale Order 66 of 391) |
|
|
Reese type with torsion bars Lot #66 (Sale Order 67 of 391) |
|
|
Pair Forklift forks. 48 inch long, 16 inch between mounts. Lot #67 (Sale Order 68 of 391) |
|
|
Pair forklift forks. 42 inch long. 16 inch between mounts Lot #68 (Sale Order 69 of 391) |
|
|
Heavy Duty plate rolls. 4 inch diameter and 28 inch wide. Lot #69 (Sale Order 70 of 391) Great gearing. Guards need installed. 3 phase. Could be easily converted to single. Was working when removed from service.
|
|
|
20' extension ladder. Ready for service Lot #70 (Sale Order 71 of 391) |
|
|
Step ladder: Good serviceable unit. 12 ft tall Lot #71 (Sale Order 72 of 391) |
|
|
Collapsible wire basket. 42 inch X 45 inch X 25 inch tall. Lot #72 (Sale Order 73 of 391) *********Contents NOT included!!!!!!!!!
|
|
|
Large assortment of Akro style bins. Lot #73 (Sale Order 74 of 391) *********Wire basket NOT included!!!!!!
|
|
|
Large assortment of facing stone. Boral Cultured Stone Lot #74 (Sale Order 75 of 391) The large crate and the smaller boxes as one lot. We of course will load!
|
|
|
Air tank: Very heavy construction. 24 inch Diameter, 70 inch long Lot #75 (Sale Order 76 of 391) |
|
|
Corn-Pro Dual Tandem trailer. 28 ft deck, 5ft fixed beavertail Lot #76 (Sale Order 77 of 391) 10 K HD. Disc brakes. Dated 10/03. Clean Title. An old workhorse ready for your inspection!
|
|
|
235 80 R16. Trailfinder HT tires. Very good condition. Will fit the Corn-Pro trailer above Lot #77 (Sale Order 78 of 391) |
|
|
Fedelcode siren removed from the fire station on Mahoning Ave, Austintown Ohio some years back Lot #78 (Sale Order 79 of 391) Nice and correct porcelain signage. Untested.
|
|
|
Cross walk signal. Walk/Don't walk Lot #79 (Sale Order 80 of 391) I also have a new sequencer for this unit in a package with instructions. Included with the light.
|
|
|
Rotating sign pole from an old service station. 11 ft tall, weighs about 400 lbs. Lot #80 (Sale Order 81 of 391) |
|
|
Rotating sign pole from an old service station. 11 ft tall, weighs about 400 lbs Lot #81 (Sale Order 82 of 391) |
|
|
Rotating sign pole from an old service station. 11 ft tall, weighs about 400 lbs Lot #82 (Sale Order 83 of 391) |
|
|
Various pulleys and sheaves as shown. from 9 inch to 30 inch diameter. Lot #83 (Sale Order 84 of 391) |
|
|
Bridgeport milling machine items Lot #84 (Sale Order 85 of 391) Good base and knee with good chrome ways. The 42 inch table looks great also. Many good parts here folks.
|
|
|
Iron and brass balance beam "Hog" scales Lot #85 (Sale Order 86 of 391) Some other scale parts like extra weight sets also.
|
|
|
Plate Clamp: 0-1 5/8 inch. 2 ton capacity. Also an old piece of heavy duty chain. Lot #86 (Sale Order 87 of 391) |
|
|
Cute little power hacksaw. 115 volt Lot #87 (Sale Order 88 of 391) Looks ready to use. A box of new grinding belts, 6 inch X 168 inch.
|
|
|
Chicago pneumatic air over hydraulic pump. USA. Looks real nice Lot #88 (Sale Order 89 of 391) |
|
|
Porcelain Sign:1 1/2 Ton bridge crane signage. All State Engineering. Lot #89 (Sale Order 90 of 391) 5 inch X 30 inch. 2 signs total.
|
|
|
Porcelain Sign: 5 ton Manning, Maxwell and Moore Bridge crane signage Lot #90 (Sale Order 91 of 391) 8 inch X 18 inch. 2 signs total.
|
|
|
Vintage Eagle Signal traffic light. 34 inch tall. Has a working sequencer installed. Lot #91 (Sale Order 92 of 391) |
|
|
L&M Thermometer: Bulb is good. Nice unit. 5 3/4 inch wide, 13 1/4 inch tall Lot #91A (Sale Order 93 of 391) |
|
|
Various fireman's wrenches and nozzle Lot #92 (Sale Order 94 of 391) |
|
|
Old shutter off an Allis Chalmers tractor.. 15 inch X 19 inch Lot #93 (Sale Order 95 of 391) |
|
|
6 various cans. Sohio bank also Lot #94 (Sale Order 96 of 391) |
|
|
Very old copper kettle. 12" inch diameter Lot #95 (Sale Order 97 of 391) |
|
|
Shovels/brooms Lot #96 (Sale Order 98 of 391) |
|
|
Tools: Several different, including a bull de-horner, large tap handles and more. Lot #97 (Sale Order 99 of 391) |
|
|
Blacksmith shears, wrenches, model T ford carb and more Lot #98 (Sale Order 100 of 391) |
|
|
Wrenches, cutter, well drilling bit and more Lot #99 (Sale Order 101 of 391) |
|
|
Old rail car mover, Rail Road items and other misc. tools Lot #100 (Sale Order 102 of 391) |
|
|
Pit saw, ice saw, ice hook and a hay saw Lot #101 (Sale Order 103 of 391) |
|
|
Planet Jr. Has extra seed plates and row marker Lot #102 (Sale Order 104 of 391) |
|
|
Cast iron and wood park bench. 48 inch wide Lot #103 (Sale Order 105 of 391) |
|
|
6' Aermotor windmill tail. New Old Stock Lot #104 (Sale Order 106 of 391) |
|
|
Cool, whimsical bridge sign. 30 inch X 36 inch. Amherst Hardware welder side panel. Lot #105 (Sale Order 107 of 391) |
|
|
3 HP IHC gas hit n miss engine. Mostly complete. Off a west Texas ranch. Stuck. Lot #106 (Sale Order 108 of 391) NOT heavily corroded or pitted.
|
|
|
Two well buckets, a pogo stick and a seed jobber Lot #107 (Sale Order 109 of 391) |
|
|
Very old hand crank drill press. Both vertical and horizontal capabilities. Marked British Made. Lot #108 (Sale Order 110 of 391) |
|
|
Three early motor car jacks Lot #109 (Sale Order 111 of 391) |
|
|
Organ weight and a Bay City crane sign. Both are cast iron Lot #110 (Sale Order 112 of 391) |
|
|
Embury railroad light. Good red lens No. 40. The fuel tank is shiny inside. Lot #111 (Sale Order 113 of 391) |
|
|
Three seed sowers. One is an early "Fiddle " or "Bow" model. The other two are Cyclone crank models Lot #112 (Sale Order 114 of 391) |
|
|
Various signs. Lot #113 (Sale Order 115 of 391) |
|
|
Sets of horse hames and brass truck horn Lot #114 (Sale Order 116 of 391) |
|
|
37 inch tubular micrometer and a set of 48 inch vernier calipers Lot #115 (Sale Order 117 of 391) |
|
|
7 inch diameter piston and a huge valve that is NOS Lot #116 (Sale Order 118 of 391) |
|
|
Piston 10 diameter Lot #117 (Sale Order 119 of 391) |
|
|
Piston 11 1/2 inch diameter Lot #118 (Sale Order 120 of 391) |
|
|
Brass Trident water meter and a Duncan parking meter Lot #119 (Sale Order 121 of 391) |
|
|
An unfired crucible. About 9 inch diameter Lot #120 (Sale Order 122 of 391) |
|
|
Iron bell. 10 inch diameter. No clapper. Believed to be from a switcher locomotive. Lot #121 (Sale Order 123 of 391) |
|
|
Brass locomotive bell. #8626. 15 inch tall, 16 inch diameter. NO clapper Lot #122 (Sale Order 124 of 391) |
|
|
Brass locomotive bell. 15 inch tall, 16 inch diameter. NO clapper Lot #123 (Sale Order 125 of 391) |
|
|
Cast iron clapper and a pneumatic clapper Lot #124 (Sale Order 126 of 391) |
|
|
Air valves to operate bells/whistles Lot #125 (Sale Order 127 of 391) |
|
|
Sherbourne caboose whistle. All brass Lot #126 (Sale Order 128 of 391) |
|
|
Cast iron locomotive bell with air operated clapper Lot #127 (Sale Order 129 of 391) Complete working unit. 12 inch diameter.
|
|
|
Unmarked hay harpoon and shoe lasts Lot #128 (Sale Order 130 of 391) |
|
|
A nice assortment of machine placards. Cast iron and cast aluminum Lot #129 (Sale Order 131 of 391) |
|
|
Ford truck grille, signs and an old washboard with good lettering Lot #130 (Sale Order 132 of 391) |
|
|
3 boxes of 12 gauge, 2 3/4 inch slugs. 15 pieces total Lot #131 (Sale Order 133 of 391) |
|
|
Stirling Cycle hat air engine. 9 inch long, 4 1/2 inch tall Lot #132 (Sale Order 134 of 391) |
|
|
Drill chucks, dial indicators and new 10,000 PSI pressure gauge Lot #133 (Sale Order 135 of 391) |
|
|
Ridgid 12 and 18 inch Iron wrenches. Also, 2 sets of ridgid chasers Lot #134 (Sale Order 136 of 391) |
|
|
Yellow beacon and red strobe safety lights. Both are 115 Volt. Tested, working Lot #135 (Sale Order 137 of 391) |
|
|
Lathe chuck guard. Flexbar brand. 15 inch opening. Probably new Lot #136 (Sale Order 138 of 391) |
|
|
Lathe chuck guard. Flexbar brand. 12 inch opening Lot #137 (Sale Order 139 of 391) |
|
|
Lathe chuck guard. Flexbar brand. Model 13060 Lot #138 (Sale Order 140 of 391) |
|
|
3 Milwaukee chargers. Tested, working Lot #139 (Sale Order 141 of 391) |
|
|
DeWalt screw gun and 1/2 inch hammer drill. Charger and the three batteries are all good. Lot #140 (Sale Order 142 of 391) |
|
|
Plate Grab: 2 ton capacity. Vestil brand. 0-1 3/8 inch . 4,000 lb capacity. Lot #141 (Sale Order 143 of 391) Probably unused.
|
|
|
SM-Beier variator. New, unused. 3 phase. Variable speed unit Lot #142 (Sale Order 144 of 391) |
|
|
A good assortment of brass stencil letter in a couple sizes. Also 5 framing squares. Lot #143 (Sale Order 145 of 391) |
|
|
Model Airplane: Balsa wood control line unit. 37 inch wingspan. McCoy Red Head engine Lot #144 (Sale Order 146 of 391) |
|
|
Model Airplane: Balsa wood model control line airplane. 21 inch wingspan. Cox engine Lot #145 (Sale Order 147 of 391) |
|
|
Model Airplane: Balsa wood 20 inch wingspan. Veco engine Lot #146 (Sale Order 148 of 391) |
|
|
Tool steel drops. All marked A2. 38 lbs Lot #147 (Sale Order 149 of 391) |
|
|
Tool steel drops. All marked 4140. 36 lbs Lot #148 (Sale Order 150 of 391) |
|
|
4 sets of rain gear. Three are new. With pants. Fire resistant Lot #149 (Sale Order 151 of 391) |
|
|
Assortment of used metal files. Lot #150 (Sale Order 152 of 391) |
|
|
ARO lead screw tapper. Removed from a machine. Untested Lot #151 (Sale Order 153 of 391) |
|
|
Nice quality shop made steady rest. 21 inch swing and a 14 inch hole Lot #152 (Sale Order 154 of 391) |
|
|
Hold downs: Partial large set. 5/8 inch studs Lot #153 (Sale Order 155 of 391) |
|
|
Assortment of grease Zerks, Gits oilers and oil cup. All different sizes Lot #154 (Sale Order 156 of 391) |
|
|
Assortment of broaches, bushing and shims. Two boxes. DuMont Minuteman set 4-A. Lot #155 (Sale Order 157 of 391) |
|
|
Various Morse Taper adapters. Most are new I believe Lot #156 (Sale Order 158 of 391) |
|
|
A good assortment of lathe carbide tool holders Lot #157 (Sale Order 159 of 391) |
|
|
Brazed carbide, Carbide and HSS holders Lot #158 (Sale Order 160 of 391) |
|
|
Lathe carbide insert holders Lot #159 (Sale Order 161 of 391) |
|
|
Lathe carbide insert holders Lot #160 (Sale Order 162 of 391) |
|
|
Milling cutters and taps New/Used Lot #161 (Sale Order 163 of 391) |
|
|
Milling cutters. New/Used. Lot #162 (Sale Order 164 of 391) |
|
|
Lathe carbide insert holders Lot #163 (Sale Order 165 of 391) |
|
|
Lathe carbide insert holders and cut-off holder Lot #164 (Sale Order 166 of 391) |
|
|
End mills. New and used Lot #165 (Sale Order 167 of 391) |
|
|
End mills. New/used. Lot #166 (Sale Order 168 of 391) |
|
|
End mills. New/used Lot #167 (Sale Order 169 of 391) |
|
|
End mills. New/Used Lot #168 (Sale Order 170 of 391) |
|
|
Repair parts and screws for insert tool holders Lot #169 (Sale Order 171 of 391) |
|
|
End mills. New/Used Lot #170 (Sale Order 172 of 391) |
|
|
End mills. New/Used Lot #171 (Sale Order 173 of 391) |
|
|
End mills. New/Used Lot #172 (Sale Order 174 of 391) |
|
|
Reamers New/Used Lot #173 (Sale Order 175 of 391) |
|
|
Reamers/arbors/collets etc Lot #174 (Sale Order 176 of 391) |
|
|
New and used end mill tooling Lot #175 (Sale Order 177 of 391) |
|
|
New and used end mill tooling Lot #176 (Sale Order 178 of 391) |
|
|
Various lathe tool holders Lot #177 (Sale Order 179 of 391) |
|
|
New and used end mill tooling Lot #178 (Sale Order 180 of 391) |
|
|
Mostly micrometer wrenches and repair items Lot #179 (Sale Order 181 of 391) |
|
|
Ford Motorcraft tune up kit. 10 kits total. some partial. Various P/N, some are sealed Lot #180 (Sale Order 182 of 391) |
|
|
Cool vintage dash, air horn, old ford lifter Lot #181 (Sale Order 183 of 391) |
|
|
Offy bellhousing, SBC to flathead Ford. Also SBC front engine mount Lot #182 (Sale Order 184 of 391) |
|
|
New in box, Lincoln grease gun Lot #183 (Sale Order 185 of 391) |
|
|
2 new work in progress Model A Ford exhaust manifold Lot #184 (Sale Order 186 of 391) |
|
|
2 new work in progress Model A Ford exhaust manifold Lot #185 (Sale Order 187 of 391) |
|
|
VFD, switch gear and boxes Lot #186 (Sale Order 188 of 391) |
|
|
Eastwood 1 HP two speed buffer. 115 Volt. Has sanding arbors also. Tested, works well on both speeds Lot #187 (Sale Order 189 of 391) |
|
|
46 reloads and 8 new slugs Lot #188 (Sale Order 190 of 391) |
|
|
Kobalt brand bolt cutters 27 inch and look good Lot #189 (Sale Order 191 of 391) |
|
|
9 various lead hammers. All are well experienced Lot #190 (Sale Order 192 of 391) |
|
|
Wire wheel Leeson 1/2HP 115 Volt. Tested/working Lot #191 (Sale Order 193 of 391) |
|
|
New/Used up to 10 inch diameter. Also new air pressure regulator Lot #192 (Sale Order 194 of 391) |
|
|
Type 309-Hi Temp. Stainless Steel wrap. Maudlin .002 inch X 20 ft X 100 ft. New sealed package Lot #193 (Sale Order 195 of 391) |
|
|
1 box Hot Dip Galv Framing nails. Paslode 2 inch X .113 inch QTY. 2000 paper tape Lot #194 (Sale Order 196 of 391) |
|
|
1 box Hot Dip Galv Framing nails. Paslode 2 inch X .113 inch QTY. 2000 paper tape Lot #195 (Sale Order 197 of 391) |
|
|
2 box Hot Dip Galv Framing nails. Paslode 2 inch X .113 inch QTY. 2000 paper tape Lot #196 (Sale Order 198 of 391) |
|
|
2 box Hot Dip Galv Framing nails. Paslode X .113 inch QTY. 2000 paper tape Lot #197 (Sale Order 199 of 391) |
|
|
2 box Hot Dip Galv Framing nails. Paslode 2 ft X .113 inch QTY. 2000 paper tape Lot #198 (Sale Order 200 of 391) |
|
|
1 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #199 (Sale Order 201 of 391) |
|
|
1 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #200 (Sale Order 202 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #201 (Sale Order 203 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #202 (Sale Order 204 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #203 (Sale Order 205 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #204 (Sale Order 206 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #205 (Sale Order 207 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #206 (Sale Order 208 of 391) |
|
|
2 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #207 (Sale Order 209 of 391) |
|
|
3 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #208 (Sale Order 210 of 391) |
|
|
3 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #209 (Sale Order 211 of 391) |
|
|
3 box Paslode framing Brite Interior, 3 inch X .120 inch 2500 Pcs Lot #210 (Sale Order 212 of 391) |
|
|
Tote full of coil roofing nails and large box of TEK screws Lot #211 (Sale Order 213 of 391) |
|
|
10,000 Lb X 5 Lb. Optima brand crane scale with charger Lot #212 (Sale Order 214 of 391) The unit works well and the battery holds a charge. Looks nice.
|
|
|
Dayton wet/dry shop vac. SS can. Working condition Lot #213 (Sale Order 215 of 391) |
|
|
Craftsman 3.0 HP table saw. With accessories shown. Tested/working. 3 inch cut depth. Lot #214 (Sale Order 216 of 391) |
|
|
7 Heavy green industrial stack bins. Excellent original finish. 10 inch wide, 20" inch deep. Lot #215 (Sale Order 217 of 391) |
|
|
Greenworks 2000 PSI pressure washer 115 volt, tested/working. Has soap container Lot #216 (Sale Order 218 of 391) |
|
|
Baldor double end tool grinder. 1/2 HP 3 phase. tested and works well. Runs quiet. Lot #217 (Sale Order 219 of 391) Great machine and has the often missing tables.
|
|
|
DC Motors 1 new, 1 used. 90 VDC with used controller Lot #218 (Sale Order 220 of 391) |
|
|
Diacro rod parter. Model #1. With hard to find attachments. Very nice Lot #219 (Sale Order 221 of 391) |
|
|
3 sets of drill rod, some missing. Inspection scope Lot #220 (Sale Order 222 of 391) |
|
|
Planer gage, inside snap gages, 12 Starrett height gage in box Lot #221 (Sale Order 223 of 391) |
|
|
Tubing Bender Good used Lot #222 (Sale Order 224 of 391) |
|
|
Tubing Bender Good used Lot #223 (Sale Order 225 of 391) |
|
|
Tubing Bender Good used Lot #224 (Sale Order 226 of 391) |
|
|
Tubing Bender Good used Lot #225 (Sale Order 227 of 391) |
|
|
Tubing Bender Good used Lot #226 (Sale Order 228 of 391) |
|
|
Tubing Bender Good used Lot #228 (Sale Order 229 of 391) |
|
|
Tubing Bender Good used Lot #229 (Sale Order 230 of 391) |
|
|
New/unused 5C collet drawbar Lot #230 (Sale Order 231 of 391) |
|
|
Collet Chuck Hardinge L-2J 3 1/4" major diameter. Good used Lot #231 (Sale Order 232 of 391) |
|
|
Collet Chuck Jacobs Rubberflex style. L1- 3 3/4 inch Major diameter. Good used Lot #232 (Sale Order 233 of 391) |
|
|
Chuck Adapter D1-6, 7/8 inch diameter pins Lot #233 (Sale Order 234 of 391) |
|
|
Lathe Chuck 8 ft diameter 4 jaw chuck. Made in Poland. Bison brand Lot #234 (Sale Order 235 of 391) |
|
|
Handles, chuck wrenches and SS bar Lot #235 (Sale Order 236 of 391) |
|
|
Complete lantern lathe tool post, 6 inch tall Lot #236 (Sale Order 237 of 391) |
|
|
Compound sine chuck. 6 inch X 10 3/4 inch. Permanent magnet Lot #237 (Sale Order 238 of 391) |
|
|
Complete lantern lathe tool post, 7 inch tall Lot #238 (Sale Order 239 of 391) |
|
|
Complete lantern lathe tool post, 8 inch tall Lot #239 (Sale Order 240 of 391) |
|
|
2 lantern lathe tool post. Sized for about a 9-10 inch lathe Lot #240 (Sale Order 241 of 391) |
|
|
7 inch B&S No. 24 vise with a swivel base Lot #241 (Sale Order 242 of 391) |
|
|
2 Swivel bases for a 4 inch and 6 inch vise, one each Lot #242 (Sale Order 243 of 391) |
|
|
Job lot of machine mounts, insulators and pads Lot #243 (Sale Order 244 of 391) |
|
|
Multiple clevis', large and small. Lifting chain and jacks Lot #244 (Sale Order 245 of 391) |
|
|
2 Stainless steel squares and long reach Vice Grips. Circular saw in box. Lot #245 (Sale Order 246 of 391) |
|
|
Box of Cat 40 tool holders Lot #246 (Sale Order 247 of 391) |
|
|
Box of Cat 50 tool holders and new retention knobs Lot #247 (Sale Order 248 of 391) |
|
|
Set of like new Hillman machinery skates. Hillman BSP-1, 1 ton capacity each. Lot #248 (Sale Order 249 of 391) Like new with drawbar. 4 skates total.
|
|
|
Lifting Magnet 400KG. Tested/Working Lot #249 (Sale Order 250 of 391) |
|
|
Lifting Magnet Tested/Working Walker model NEO 25 Lot #250 (Sale Order 251 of 391) |
|
|
Lathe, inspection tie downs etc. Lot #251 (Sale Order 252 of 391) |
|
|
New Tin Snips 5 pieces. All NIP Irvin, several styles Lot #252 (Sale Order 253 of 391) |
|
|
Good used end mils. Lot #253 (Sale Order 254 of 391) |
|
|
New misc. lathe inserts Lot #254 (Sale Order 255 of 391) |
|
|
Taps Both new and used Lot #255 (Sale Order 256 of 391) |
|
|
Nice lot of small solid carbide end mills. Various shapes Lot #256 (Sale Order 257 of 391) |
|
|
Box of straight and Silver and Deming (reduced shank) drills Lot #256A (Sale Order 258 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #257 (Sale Order 259 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #258 (Sale Order 260 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #259 (Sale Order 261 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #260 (Sale Order 262 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #261 (Sale Order 263 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #262 (Sale Order 264 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #263 (Sale Order 265 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #264 (Sale Order 266 of 391) |
|
|
Group of new HSS drills, various with straight shank Lot #265 (Sale Order 267 of 391) |
|
|
Used set of Silver and Deming style drills Lot #266 (Sale Order 268 of 391) |
|
|
Assortment of taper shank drills Lot #267 (Sale Order 269 of 391) |
|
|
Assortment of taper shank drills Lot #268 (Sale Order 270 of 391) |
|
|
Assortment of taper shank drills Lot #269 (Sale Order 271 of 391) |
|
|
Assortment of taper shank drills Lot #270 (Sale Order 272 of 391) |
|
|
Mostly new taper shank drills Lot #271 (Sale Order 273 of 391) |
|
|
Mostly new taper shank drills Lot #272 (Sale Order 274 of 391) |
|
|
Mostly new taper shank drills Lot #273 (Sale Order 275 of 391) |
|
|
Mostly new taper shank drills Lot #274 (Sale Order 276 of 391) |
|
|
Nice shop made drill rack with many very good and new taper shank drills. Up to 2 5/8 in diameter Lot #275 (Sale Order 277 of 391) |
|
|
Marsh stencil cutter with a lot of stencil paper, Stencil Ink and a brush Lot #276 (Sale Order 278 of 391) |
|
|
Box of bearing scrapers Lot #277 (Sale Order 279 of 391) |
|
|
2 boxes of bearing scrapers. Lot #278 (Sale Order 280 of 391) |
|
|
Smaller turret for lathe tailstock. 6 position, 5 inch diameter Lot #279 (Sale Order 281 of 391) |
|
|
Assortment of brand new carbide tipped hammer drills Lot #280 (Sale Order 282 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #281 (Sale Order 283 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills. Lot #282 (Sale Order 284 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills. Lot #283 (Sale Order 285 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #284 (Sale Order 286 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #285 (Sale Order 287 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #286 (Sale Order 288 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #287 (Sale Order 289 of 391) SDS PLUS shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #288 (Sale Order 290 of 391) Straight shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #290 (Sale Order 291 of 391) Straight shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #291 (Sale Order 292 of 391) Straight shank. Various brands and sizes.
|
|
|
Assortment of brand new carbide tipped hammer drills Lot #292 (Sale Order 293 of 391) Straight shank. Various brands and sizes.
|
|
|
3 Pcs new SDS MAX carbide tipped hammer drills, various Lot #293 (Sale Order 294 of 391) |
|
|
Little Giant Model NK-2. New, unused. 230 V submersible pump Lot #294 (Sale Order 295 of 391) |
|
|
Sheet metal bead roller 20 inch throat has Ogee dies Lot #294A (Sale Order 296 of 391) |
|
|
20 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #295 (Sale Order 297 of 391) |
|
|
20 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #296 (Sale Order 298 of 391) |
|
|
20 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #297 (Sale Order 299 of 391) |
|
|
20 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #298 (Sale Order 300 of 391) |
|
|
10 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #299 (Sale Order 301 of 391) |
|
|
20 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #300 (Sale Order 302 of 391) |
|
|
18 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #301 (Sale Order 303 of 391) |
|
|
16 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #302 (Sale Order 304 of 391) |
|
|
16 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops. Lot #303 (Sale Order 305 of 391) |
|
|
20 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops Lot #304 (Sale Order 306 of 391) |
|
|
30 Pcs. Good used 5C collets. Assorted brands and sizes. Some are threaded for stops. Lot #305 (Sale Order 307 of 391) With nice steel rack.
|
|
|
Shaped 5C collets and two setting blocks Lot #306 (Sale Order 308 of 391) |
|
|
Misc. R-8 tooling for your Bridgeport milling machine Lot #307 (Sale Order 309 of 391) |
|
|
Various sizes/grades of abrasive stones Lot #308 (Sale Order 310 of 391) |
|
|
30 GR, HP. Rimfire magnum. 50 rounds. 5MM Lot #309 (Sale Order 311 of 391) |
|
|
30 GR, HP. Rimfire magnum. 50 rounds, 5 MM Lot #310 (Sale Order 312 of 391) |
|
|
150 rounds .22 Magnum Armscor. 40 GR HP Lot #311 (Sale Order 313 of 391) |
|
|
500 rounds .22 Magnum Armscor. 40 GR HP Lot #312 (Sale Order 314 of 391) |
|
|
.22 WRF Super X, CCI 70 rounds total Lot #313 (Sale Order 315 of 391) |
|
|
.22 WRF Winchester 50 rounds Lot #314 (Sale Order 316 of 391) |
|
|
.25 Auto, Western, 57 rounds Lot #315 (Sale Order 317 of 391) |
|
|
.40 S&W 11 boxes, 50 rounds total Lot #316 (Sale Order 318 of 391) |
|
|
.50 BMG 10 rounds Lake City Lot #317 (Sale Order 319 of 391) |
|
|
.50 BMG 10 rounds Lake City Lot #318 (Sale Order 320 of 391) |
|
|
.50 BMG 10 rounds Lake City Lot #319 (Sale Order 321 of 391) |
|
|
.50 BMG 10 rounds Lake City Lot #320 (Sale Order 322 of 391) |
|
|
.50 BMG 10 rounds Lake City Lot #321 (Sale Order 323 of 391) |
|
|
20 rounds 130 GR SP. .270 Win Lot #322 (Sale Order 324 of 391) |
|
|
.270 Winchester 20 rounds 150 Gr. SP Lot #323 (Sale Order 325 of 391) |
|
|
.270 Winchester 20 rounds, 130 gr Federal BTSP Game King Lot #324 (Sale Order 326 of 391) |
|
|
.45-70 81 rounds 300 Gr once fired Lot #325 (Sale Order 327 of 391) |
|
|
.45-70 67 rounds, 405 Gr. Lot #326 (Sale Order 328 of 391) |
|
|
.40 S&W 46 rounds, 180 Gr. Ultramax Lot #327 (Sale Order 329 of 391) |
|
|
.270 Winchester 20 rounds 130 and 150 Gr. SP Lot #328 (Sale Order 330 of 391) |
|
|
.270 Winchester 20 rounds 150 Gr, SP Remington Lot #329 (Sale Order 331 of 391) |
|
|
.17 HMR 50 rounds, 20 Gr. XTP Hornady Lot #330 (Sale Order 332 of 391) |
|
|
.17 HMR 50 rounds 17 Gr. Hornady Lot #331 (Sale Order 333 of 391) |
|
|
.17 HMR 100 rounds, 17 Gr Hornady Lot #332 (Sale Order 334 of 391) |
|
|
.17 HMR 200 rounds CCI Lot #333 (Sale Order 335 of 391) |
|
|
.270 Winchester 20 rounds 150 Gr. Core Lokt, SP Lot #334 (Sale Order 336 of 391) |
|
|
.270 Winchester 20 rounds, 150 Gr. Hornady Inter Lokt Lot #335 (Sale Order 337 of 391) |
|
|
.380 Automatic 90 Gr. FMJ Lot #336 (Sale Order 338 of 391) |
|
|
.380 Automatic 50 rounds, 180 Gr. 50 rounds 95 Gr. Lot #337 (Sale Order 339 of 391) |
|
|
.380 Automatic 50 rounds 90 Gr. 13 rounds 102Gr Lot #338 (Sale Order 340 of 391) |
|
|
.30-30 Winchester 20 Rounds 150 Gr. Core Lokt SP Lot #339 (Sale Order 341 of 391) |
|
|
.300 Winchester Magnum 14 Rounds 180 Gr. Remington Core Lokt PSP Lot #340 (Sale Order 342 of 391) |
|
|
.300 Winchester magnum 14 Rounds 180 Gr. Ballistic Silvertip Lot #341 (Sale Order 343 of 391) |
|
|
.338 Winchester Magnum 20 rounds 225 Gr. T-DPX Lot #342 (Sale Order 344 of 391) |
|
|
.45-70 20 Rounds Hornady Revolution 325 Gr. Lot #343 (Sale Order 345 of 391) |
|
|
Unknown Iron Projectile 15 inch tall, 6 inch diameter, weighs 77 lbs Lot #343A (Sale Order 346 of 391) |
|
|
Cast iron training shell circa WW2. weighs 35 lb, 34 inch tall. Lot #343B (Sale Order 347 of 391) |
|
|
12 Gauge 15 rounds. 3" 00 Buckshot Federal Lot #344 (Sale Order 348 of 391) |
|
|
Nice assortment of boring bars. Small set is USA, 1/2 inch diameter Lot #345 (Sale Order 349 of 391) |
|
|
Bridgeport 2 inch boring head, R-8, in original box Lot #346 (Sale Order 350 of 391) |
|
|
Boring Head Criterion DBL 203, 40 taper Lot #347 (Sale Order 351 of 391) |
|
|
Collets, new test light, center etc. Lot #348 (Sale Order 352 of 391) |
|
|
Old. Miniature wood lathe. Sypher Mfg. Co., Made in Toledo, Ohio 17 inch long Lot #349 (Sale Order 353 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #350 (Sale Order 354 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #351 (Sale Order 355 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #352 (Sale Order 356 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #353 (Sale Order 357 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #354 (Sale Order 358 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #355 (Sale Order 359 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #356 (Sale Order 360 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #357 (Sale Order 361 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #358 (Sale Order 362 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #359 (Sale Order 363 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #360 (Sale Order 364 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #361 (Sale Order 365 of 391) |
|
|
New USA Sockets 3/8 inch drive. USA made. Chrome. Various Lot #362 (Sale Order 366 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #363 (Sale Order 367 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #364 (Sale Order 368 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #365 (Sale Order 369 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #366 (Sale Order 370 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #367 (Sale Order 371 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #369 (Sale Order 372 of 391) |
|
|
New USA Sockets 1/2 inch drive. USA made. Chrome. Various Lot #370 (Sale Order 373 of 391) |
|
|
Large Sockets Mostly 3/4 inch drive. Some 1/2 inch and 1 inch drive Lot #371 (Sale Order 374 of 391) |
|
|
Hard abrasive Wheels 5 inch Metal/Stainless, NO arbor. 20 Pcs. Lot #372 (Sale Order 375 of 391) |
|
|
Hard abrasive Wheels 5 inch Metal/Stainless, NO arbor. 20 Pcs. Lot #373 (Sale Order 376 of 391) |
|
|
Hard abrasive Wheels 5 inch Metal/Stainless, NO arbor. 20 Pcs. Lot #374 (Sale Order 377 of 391) |
|
|
Hard Abrasive Wheels 14 Pcs. 5/8 inch -11 arbor, 5 inch Lot #375 (Sale Order 378 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 4 inch Lot #376 (Sale Order 379 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 4 inch Lot #377 (Sale Order 380 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 4 inch Lot #378 (Sale Order 381 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 4 inch Lot #379 (Sale Order 382 of 391) |
|
|
Hard Abrasive Wheels 14 Pcs. 5/8"-11 arbor, 5 inch Lot #380 (Sale Order 383 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 4 1/2 inch, 5/8 inch Hole Lot #381 (Sale Order 384 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 4 1/2 inch, 5/8 inch Hole Lot #382 (Sale Order 385 of 391) |
|
|
Hard Abrasive Wheels 20 Pcs. 5 inch, 5/8 inch Hole Lot #383 (Sale Order 386 of 391) |
|
|
12 Gauge 9 Pcs., slugs Lot #384 (Sale Order 387 of 391) |
|
|
12 Gauge 15 Pcs., slugs Lot #385 (Sale Order 388 of 391) |
|
|
12 Gauge 10 Pcs., slugs Lot #386 (Sale Order 389 of 391) |
|
|
12 Gauge 10 Pcs., slugs Lot #387 (Sale Order 390 of 391) |
|
|
12 gauge 10 Pcs., slugs Lot #388 (Sale Order 391 of 391) |
|