Complete Machine Shop Dispersal
Complete Machine Shop Dispersal
by L & H Auctions, Inc.
Wed,
Aug
23,
2023
9:30 AM
Eastern
Complete Machine Shop Dispersal
|
|||
|
|
|
Complete Machine Shop Dispersal |
|
| Industrial Machinery & Equipment > L & H Auctions, Inc. > Complete Machine Shop Dispersal | |
|
Complete Machine Shop Dispersal |
|
|
by L & H Auctions, Inc.
Wed,
Aug
23,
2023
9:30 AM
Eastern
Complete Machine Shop Dispersal
|
|
|
This Auction Is A Live On-Site Event, On-line bidding Available As Well If You Cannot Attend Lot #1 (Sale Order 1 of 296) This Auction Is A Live On-Site Event, On-line bidding Available As Well If You Cannot Attend. The Lathe pictured on this lot is for display only and is sold on Lot# 415
|
|
|
STOP! READ THIS BEFORE BIDDING! IMPORTANT INFORMATION BELOW! Lot #2 (Sale Order 2 of 296) Buyers must read and COMPREHEND ALL terms and conditions before bidding. When registering, you are agreeing to all terms and conditions. L&H Auctions nor its employees are not in the business of intentionally misrepresenting equipment or misleading buyers with descriptions or pictures. However, we can't ABSOLUTELY GUARANTEE without any doubt we won't make a few mistakes, and that there will not be errors in this catalog. Any errors made in picturing or describing items do NOT negate the buyers responsibility to pay for their purchases. We will make every attempt possible to correct these errors before each lot hits the Auction Block. It is the buyers responsibility to make sure each item meets his or her needs and requirements before placing any bids.
|
|
|
TERMS & CONDITIONS Lot #3 (Sale Order 3 of 296) Internet Premium: 13%
Participation Requirements: Valid Credit Card required for bidding approval Payment Options: PA Check, Wire Transfer, and Cash Payment Instructions: Payment: L&H Auctions does not accept Pay Pal. We accept PA checks, money orders, cash, and bank or certified check as acceptable forms of payment at our discretion . Bidders will be contacted directly by the e-mail and/or phone number on their bidding profile at the end of the sale to arrange settlement and Pick Up Instructions. Out of State buyers must contact L&H Auctions about payment before scheduling pickup. Currency Type: USD Pickup days are: Day of sale until 4:00 pm & August 24-25 9:00 am to 4:00 am & By appointment. All Items must be picked up by August 26 unless prior arrangement has been made with L&H Auctions. To make an appointment contact Garrett Ball at 717-926-2596. Failure to pick up purchases in this time frame will result in the loss of Payment and items purchased! All items sold absolute. All Items are Being Sold " AS IS". Inspection Date is Monday, August 21, 9:00 am - 3:00 pm Bidding: By bidding on an item, you are entering into a binding legal contract. Condition: The property purchased at a L&H Auctions auction, is sold "AS IS" without any representations or warranties, express or implied, by L&H Auctions or its seller(s) as to the merchantability, fitness for a particular purpose or description of any property. Any condition statement is given as a courtesy to the client. No statement anywhere, oral or written, shall be deemed as such a guarantee, warranty or representation. L&H Auctions shall have no responsibility for any error or omission. The buyer should assume all items are not free from wear and tear, imperfections or the effects of aging. It shall be the bidder's responsibility, whether present or absentee, to determine the condition of each item. All prospective buyers are strongly advised to examine any property in which they are interested in before the auction takes place. All items are available for viewing. Inspection Date is Monday, August 21, 9:00 am - 3:00 pm |
|
|
BUYERS PREMIUM Lot #4 (Sale Order 4 of 296) L&H Auctions charges a 13% buyers premium.
|
|
|
AUCTION BROCHURE Lot #5 (Sale Order 5 of 296) Onsite live bidding available. Terms: Cash, Pa check, wire transfer. 10% buyers premium for onsite bidders.
|
|
|
Helios 13" Caliper Lot #100 (Sale Order 6 of 296) Helios 13" Caliper
|
|
|
Mitutoyo 12" Dial Caliper& Scherr Tumico 24"Vernier Lot #101 (Sale Order 7 of 296) Mitutoyo 12" Dial Caliper& Scherr Tumico 24"Vernier
|
|
|
Brown & Sharpe 14 Caliper & Wooden Case Lot #102 (Sale Order 8 of 296) Brown & Sharpe 14 Caliper & Wooden Case
|
|
|
Takachia Tecloch Dial Indicator w/Extensions & Case Lot #103 (Sale Order 9 of 296) Takachia Tecloch Dial Indicator w/Extensions & Case
|
|
|
Pratt & Whitney Precision End Measures w/Wooden Case & Inside Micrometer Lot #104 (Sale Order 10 of 296) Pratt & Whitney Precision End Measures w/Wooden Case & Inside Micrometer
|
|
|
Pratt & Whitney Precision End Measures w/Wooden Case & Inside Micrometer Lot #105 (Sale Order 11 of 296) Pratt & Whitney Precision End Measures w/Wooden Case & Inside Micrometer
|
|
|
Starrett 0-12" Micrometer Set w/standards & Wooden Case missing 0-1, 1-2, 2-3 Lot #106 (Sale Order 12 of 296) Starrett 0-12" Micrometer Set w/standards & Wooden Case missing 0-1, 1-2, 2-3
|
|
|
Starrett 0-6" Micrometer Set w/Standards & Wooden Case missing 0-1, 1-2, Lot #107 (Sale Order 13 of 296) Starrett 0-6" Micrometer Set w/Standards & Wooden Case missing 0-1, 1-2,
|
|
|
Fowler Micrometer Set W/Standards & Wooden Case Lot #107A (Sale Order 14 of 296) Fowler Micrometer Set W/Standards & Wooden Case
|
|
|
Shars Electronic Digital Height Guages Lot #108 (Sale Order 15 of 296) Shars Electronic Digital Height Guages
|
|
|
Brown & Sharpe # 586 20" Height Gauge Lot #109 (Sale Order 16 of 296) Brown & Sharpe # 586 20" Height Gauge
|
|
|
Lot of Inspection Stands Magnetic Bases, Indicator Accessories Lot #110 (Sale Order 17 of 296) Lot of Inspection Stands Magnetic Bases, Indicator Accessories
|
|
|
Mitutoyo 201 - 152 1-2" Snap Gauge w/Foam Lot #111 (Sale Order 18 of 296) Mitutoyo 201 - 152 1-2" Snap Gauge w/Foam
|
|
|
Mitutoyo 201-153 2-3" Snap Gauge w/Foam Lot #112 (Sale Order 19 of 296) Mitutoyo 201-153 2-3" Snap Gauge w/Foam
|
|
|
Mitutoyo 201 - 154 3-4" Snap Gauge w/Foam Lot #113 (Sale Order 20 of 296) Mitutoyo 201 - 154 3-4" Snap Gauge w/Foam
|
|
|
Doall Micro Step Gaging System w/Wooden Box Lot #114 (Sale Order 21 of 296) Doall Micro Step Gaging System w/Wooden Box
|
|
|
Starrett No 724 18"-24" Outside Micrometer Set w/all Anvils & Standards & Wooden Case Lot #115 (Sale Order 22 of 296) Starrett No 724 18"-24" Outside Micrometer Set w/all Anvils & Standards & Wooden Case
|
|
|
Starrett No 724 12-18" O utside Micrometer Set w/all Anvils, standards & Wooden Case Lot #116 (Sale Order 23 of 296) Starrett No 724 12-18" O utside Micrometer Set w/all Anvils, standards & Wooden Case
|
|
|
Starrett No 724 12-18" Outside Micrometer Set w/all Anvils, standards & Wooden Case Lot #117 (Sale Order 24 of 296) Starrett No 724 12-18" Outside Micrometer Set w/all Anvils, standards & Wooden Case
|
|
|
Fowler 24" Vernier Dial Caliper w/Wooden Case Lot #118 (Sale Order 25 of 296) Fowler 24" Vernier Dial Caliper w/Wooden Case
|
|
|
Starrett Depth Micrometer w/Wooden Box Lot #119 (Sale Order 26 of 296) Starrett Depth Micrometer w/Wooden Box
|
|
|
Lot of 2 Meyer Pin Gauge Sets .061-.500 minus w/Wooden Case Lot #120 (Sale Order 27 of 296) Lot of 2 Meyer Pin Gauge Sets .061-.500 minus w/Wooden Case
|
|
|
Lot of DoAll & Mitutoyo Gage Blocks w/Wooden Case Lot #121 (Sale Order 28 of 296) Lot of DoAll & Mitutoyo Gage Blocks w/Wooden Case
|
|
|
Lot of (2) Pin guage Sets as Pictured w/Metal Cases Lot #122 (Sale Order 29 of 296) Lot of (2) Pin guage Sets as Pictured w/Metal Cases
|
|
|
Lot of (2) Gage Block Sets as Pictured DoAll & Brown & Sharpe w/Wooden Cases Lot #123 (Sale Order 30 of 296) Lot of (2) Gage Block Sets as Pictured DoAll & Brown & Sharpe w/Wooden Cases
|
|
|
DoAll Gage Block Set .100-4" w/Wooden Case Lot #124 (Sale Order 31 of 296) DoAll Gage Block Set .100-4" w/Wooden Case
|
|
|
Lot of (3) Starrett Micrometer 9-10, 10-11, 11-12 w/Wooden Cases Lot #125 (Sale Order 32 of 296) Lot of (3) Starrett Micrometer 9-10, 10-11, 11-12 w/Wooden Cases
|
|
|
Starrett No. 823E Inside Micrometer Range 4"-40" w/Wooden Case Lot #126 (Sale Order 33 of 296) Starrett No. 823E Inside Micrometer Range 4"-40" w/Wooden Case
|
|
|
Starrett No 445 Depth Micrometer Set w/Wooden Case Lot #127 (Sale Order 34 of 296) Starrett No 445 Depth Micrometer Set w/Wooden Case
|
|
|
Starrett No 124B Inside Micrometer Set w/Wooden Case Lot #128 (Sale Order 35 of 296) Starrett No 124B Inside Micrometer Set w/Wooden Case
|
|
|
Lot of 8 Micrometers (7) Starrett 1 (2) Mitutoyo w/Cases Lot #129 (Sale Order 36 of 296) Lot of 8 Micrometers (7) Starrett 1 (2) Mitutoyo w/Cases
|
|
|
Contents of Vidmar Cabinet Drawer including Kolee Grinding Spindle Diamond Wheels indexing Plates, Lot #130 (Sale Order 37 of 296) Contents of Vidmar Cabinet Drawer including Kolee Grinding Spindle Diamond Wheels indexing Plates, (Drawer & Dividers Not Included)
|
|
|
Contents of Vidmar Cabinet Drawer including Drill Bits, Angle Blocks, Mandrels, etc. Lot #131 (Sale Order 38 of 296) Contents of Vidmar Cabinet Drawer including Drill Bits, Angle Blocks, Mandrels, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Vidmar Cabinet Drawer w/Reamers Lot #132 (Sale Order 39 of 296) Contents of Vidmar Cabinet Drawer w/Reamers (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Reamers, Taps, etc. Lot #133 (Sale Order 40 of 296) Contents of Drawer Reamers, Taps, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Step Blocks, Hold Downs, etc. Lot #134 (Sale Order 41 of 296) Contents of Drawer Step Blocks, Hold Downs, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer "t" Nuts, Step Blocks, Studs, Hold Downs Lot #135 (Sale Order 42 of 296) Contents of Drawer "t" Nuts, Step Blocks, Studs, Hold Downs (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Collets, Tap Holders, Drill Bits, etc. Lot #136 (Sale Order 43 of 296) Contents of Drawer Collets, Tap Holders, Drill Bits, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer End Mills Lot #137 (Sale Order 44 of 296) Contents of Drawer End Mills. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Indexable Lathe Tools, Boring Bars, Dividers, etc. Lot #138 (Sale Order 45 of 296) Contents of Drawer Indexable Lathe Tools, Boring Bars, Dividers, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Quantity of End Mills, Ball End, Radius, etc. Lot #139 (Sale Order 46 of 296) Contents of Drawer Quantity of End Mills, Ball End, Radius, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer End Mills, Counter Bores, Taps, Slotting Cutters, etc. Lot #140 (Sale Order 47 of 296) Contents of Drawer End Mills, Counter Bores, Taps, Slotting Cutters, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Morse Taper Adaptors, Indexable Lathe Tool Holders, Mandrels, etc. Lot #141 (Sale Order 48 of 296) Contents of Drawer Morse Taper Adaptors, Indexable Lathe Tool Holders, Mandrels, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer, Morse Taper Drills, Straight Shenk Drills, End Mills, etc. Lot #142 (Sale Order 49 of 296) Contents of Drawer, Morse Taper Drills, Straight Shenk Drills, End Mills, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Taps Lot #143 (Sale Order 50 of 296) Contents of Drawer Taps (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Large End Mills Lot #144 (Sale Order 51 of 296) Contents of Drawer Large End Mills. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Taps, Heli Coil Kits, Milling Cutters Lot #145 (Sale Order 52 of 296) Contents of Drawer Taps, Heli Coil Kits, Milling Cutters. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Number Drills (All New) Lot #146 (Sale Order 53 of 296) Contents of Drawer Number Drills (All New). (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer New Fractional Drill Bits Lot #147 (Sale Order 54 of 296) Contents of Drawer New Fractional Drill Bits. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Taps Lot #148 (Sale Order 55 of 296) Contents of Drawer Taps. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Taps, Pipe Taps, Drill Bits, etc. Lot #149 (Sale Order 56 of 296) Contents of Drawer Taps, Pipe Taps, Drill Bits, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer New Carbide Inserts, New indexable Boring Bars, Indexable End Mills Lot #150 (Sale Order 57 of 296) Contents of Drawer New Carbide Inserts, New indexable Boring Bars, Indexable End Mills. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer End Mills, Reamers, Counter Sink Drills, etc. Lot #151 (Sale Order 58 of 296) Contents of Drawer End Mills, Reamers, Counter Sink Drills, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer, Boring Bars, Acme Taps, Broaches, Tap Holder, etc. Lot #152 (Sale Order 59 of 296) Contents of Drawer, Boring Bars, Acme Taps, Broaches, Tap Holder, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Cemented Carbide Tools HSS, etc. Lot #153 (Sale Order 60 of 296) Contents of Drawer Cemented Carbide Tools HSS, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer End Mills, Cemented Carbide Tools, Boring Bar, etc. Lot #154 (Sale Order 61 of 296) Contents of Drawer End Mills, Cemented Carbide Tools, Boring Bar, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Drill Bits Lot #155 (Sale Order 62 of 296) Contents of Drawer Drill Bits. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Indexable Boring Bars, Tool Holders, etc. Lot #156 (Sale Order 63 of 296) Contents of Drawer Indexable Boring Bars, Tool Holders, etc. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Horizontal Milling Cutters Lot #157 (Sale Order 64 of 296) Contents of Drawer Horizontal Milling Cutters. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools Lot #158 (Sale Order 65 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools Lot #159 (Sale Order 66 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools Lot #160 (Sale Order 67 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included) Lot #161 (Sale Order 68 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools (Drawer & Dividers Not Included) Lot #162 (Sale Order 69 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools Lot #163 (Sale Order 70 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Dies, Die Holders, Allen Wrenches Lot #164 (Sale Order 71 of 296) Contents of Drawer Dies, Die Holders, Allen Wrenches. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools Lot #165 (Sale Order 72 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
Contents of Drawer Misc. Tools Lot #166 (Sale Order 73 of 296) Contents of Drawer Misc. Tools. (Drawer & Dividers Not Included)
|
|
|
16 Drawer Vidmar Cabinet No Contents Lot #167 (Sale Order 74 of 296) 16 Drawer Vidmar Cabinet No Contents
|
|
|
12 Drawer Vidmar Cabinet No Contents Lot #168 (Sale Order 75 of 296) 12 Drawer Vidmar Cabinet No Contents
|
|
|
9 Drawer NU ERA Cabinet No Contents Lot #169 (Sale Order 76 of 296) 9 Drawer NU ERA Cabinet No Contents
|
|
|
Lot of End Mills Lot #170 (Sale Order 77 of 296) Lot of End Mills
|
|
|
Lot of End Mills Milling Cutters Lot #171 (Sale Order 78 of 296) Lot of End Mills Milling Cutters
|
|
|
Lot of Ridgid Threading Dies Lot #172 (Sale Order 79 of 296) Lot of Ridgid Threading Dies
|
|
|
Lot of End Mills Lot #173 (Sale Order 80 of 296) Lot of End Mills
|
|
|
Lot of New Indexable Carbide Inserts Lot #174 (Sale Order 81 of 296) Lot of New Indexable Carbide Inserts
|
|
|
Lot of Drill Bits & Metal Indexes Lot #175 (Sale Order 82 of 296) Lot of Drill Bits & Metal Indexes
|
|
|
Lot of New Indexable Carbide Inserts Lot #176 (Sale Order 83 of 296) Lot of New Indexable Carbide Inserts
|
|
|
Lot of Straight Shank Drill Bits Lot #177 (Sale Order 84 of 296) Lot of Straight Shank Drill Bits
|
|
|
Four Drill Chucks Lot #198 (Sale Order 85 of 296) Four Drill Chucks Jacobs and Cushman |
|
|
Lot of Milling Cutters Lot #178 (Sale Order 86 of 296) Lot of Milling Cutters
|
|
|
Lot of Taps Lot #179 (Sale Order 87 of 296) Lot of Taps
|
|
|
mill cutters Lot #180 (Sale Order 88 of 296) Large selection of Mill cutters |
|
|
selection of TAPS and hollders Lot #181 (Sale Order 89 of 296) selection of TAPS and hollders |
|
|
End mill lot Lot #182 (Sale Order 90 of 296) End mill lot |
|
|
nice selection of end mills Lot #183 (Sale Order 91 of 296) nice selection of end mills |
|
|
nice selection of end mills Lot #184 (Sale Order 92 of 296) nice selection of end mills |
|
|
Morse taper drill bits Lot #185 (Sale Order 93 of 296) Morse taper drill bits |
|
|
Reamer lot Lot #186 (Sale Order 94 of 296) Reamer lot |
|
|
letter drill bit index as shown Lot #187 (Sale Order 95 of 296) letter drill bit index as shown |
|
|
Number drill bit index as shown Lot #188 (Sale Order 96 of 296) Number drill bit index as shown |
|
|
fractional drill bit indexer as shown Lot #189 (Sale Order 97 of 296) fractional drill bit indexer as shown |
|
|
multiple live centers Lot #190 (Sale Order 98 of 296) Bison 8811-6 Precision live Center mt6\ plus others |
|
|
Morse taper # 6 Lot of four Lot #191 (Sale Order 99 of 296) Morse taper # 6 Lot of four |
|
|
Morse taper various sizes Lot #192 (Sale Order 100 of 296) Morse taper various sizes |
|
|
TMS/fifth floating tap holder and lots of BILZ adapters Lot #193 (Sale Order 101 of 296) TMS/fifth floating tap holder and lots of BILZ adapters |
|
|
Morse Tapper sleeve Collis 60454 sx4mtez\cleveland 3-2 Cleveland 2-2 Lot #194 (Sale Order 102 of 296) Morse Tapper sleeve Collis 60 454 sx4mtez\cleveland 3-2 Cleveland 2-2 |
|
|
top-matic (2) Lot #195 (Sale Order 103 of 296) Topmatic 30 X reversible tapping attachment capacity #0- 1/4 in 2000 Max RPM Top-matic 70x reversible tapping attachment Plus capacity # 10- 5/8 in 1000 Max RPM |
|
|
Jacobs drill Chuck's Lot #196 (Sale Order 104 of 296) Jacobs drill Chuck's No 20N capacity 3/8"-1" with Morse taper Jacob's Chuck 16N 3JT capacity 1/8 in to 5/8 in with Morse taper , Riter live Center |
|
|
multiple Chucks Lot #197 (Sale Order 105 of 296) Cushman drill chuck c16 Japan 3jt with R8 attachment, Jacob's drill chuck 14 n 3 JT with R8 attachment and one and 3/8 Linux hole saw, Jacob's drill chuck 16 n with R8 attachment cap 1/8 inch to 5/8 in |
|
|
three Albrecht drill Chucks Lot #199 (Sale Order 106 of 296) three Albrecht drill Chucks 0-1/4", 0-5/16", 1/32"-1/2" |
|
|
3 High Precision Jacob's drill Chuck's Lot #200 (Sale Order 107 of 296) 3 High Precision Jacob's drill Chuck's Jkp-100 J2, JK P 130 J33, & Albrecht 1/32"-1/2" |
|
|
2 Jacob's drill Chuck's and three keys Lot #201 (Sale Order 108 of 296) 2 Jacob's drill Chuck's and three keys 34-022 taper, and 34-33 taper |
|
|
3 live centers Etc Lot #202 (Sale Order 109 of 296) Lot of three live centers with Morse taper ready tool Co 630, pipe contender 3mt Collis Co 65503, ready tool Co. GL40 |
|
|
three boring heads Lot #203 (Sale Order 110 of 296) Lot of three boring heads, Armstrong bh-102-a with R8 attachment command urma 225501 with R8 attachment, Devlieg microbore R 504-R304 with 1 in Shank |
|
|
three boring heads Lot #204 (Sale Order 111 of 296) Lot of three boring heads APT BH3 with R8 attachment |
|
|
9 centers Lot #205 (Sale Order 112 of 296) Lot of nine centers, some with Morse taper |
|
|
Boku micro dial boring head Lot #206 (Sale Order 113 of 296) Boku micro dial boring head Serial # 500 1005 with wooden box and manual |
|
|
Lot of seven fly cutters Lot #207 (Sale Order 114 of 296) Lot of seven fly cutters |
|
|
lot of six rigid dies and rigid ratchet 00-R Lot #208 (Sale Order 115 of 296) lot of six rigid dies and rigid ratchet 00-R |
|
|
five Aloris Lathe quick change tool holders with carbide tools tool holders with carbide tools Lot #209 (Sale Order 116 of 296) five Aloris lathe quick change tool holders with carbide tools |
|
|
stamping sets Lot #210 (Sale Order 117 of 296) Lot of stamping sets, letters and numbers |
|
|
(5 )Aloris lathe quick change tool holders\ cutoff tool Lot #211 (Sale Order 118 of 296) (5) Aloris lathe quick change tool holders\ cutoff tool |
|
|
(8) Aloris lathe quick change tool holders & (1) Aloris Tool post Lot #212 (Sale Order 119 of 296) (8) Aloris lathe quick change tool holders & (1) Aloris Tool post Quick Change Model cxa and cut off tool block Plus carbide tools |
|
|
lot of 11 IMS Quick Change lathe tool holders with some tooling Lot #213 (Sale Order 120 of 296) lot of 11 IMS Quick Change lathe tool holders with some tooling |
|
|
lot of 4 Quick Change lathe tool holders and 1 IMS quick change tool post Lot #214 (Sale Order 121 of 296) lot of 1 IMS Quick Change lathe tool holders and 1 IMS quick change tool post |
|
|
lot of 4 1-in. Stick turning tools w/ carbide inserts, one 3/4 in turning stick tool, one 3/4 in Lot #215 (Sale Order 122 of 296) lot of four 1-in Stick turning tools with carbide inserts, one 3/4 in. turning stick tool, one 3/4 in round tool boring bar, all with carbide inserts |
|
|
five IMS Quick Change lathe tool holders Lot #216 (Sale Order 123 of 296) five IMS Quick Change lathe tool holders |
|
|
12" four jaw Chuck Lot #217 (Sale Order 124 of 296) 12" four jaw Chuck |
|
|
4 Dorian quick change tool holders Lot #218 (Sale Order 125 of 296) 4 Dorian quick change tool holders for boring bars. Three boring bars included |
|
|
7 stick tool holders Lot #219 (Sale Order 126 of 296) 7 stick tool holders Five Are 1" Kennametal holders with carbide tooling. 2 are 1 1/4" carbology systems holders |
|
|
lot of boring, bar tooling and borite B500 kit Lot #220 (Sale Order 127 of 296) lot of boring, bar tooling and borite B500 kit |
|
|
Gauging tools Lot #221 (Sale Order 128 of 296) Lot ofgauging tools, 4" micro height gauge, Lufkin rule Co. #900 with case, 36 piece space block set with case |
|
|
self opening die head with Morse Taper attachment Lot #222 (Sale Order 129 of 296) self opening die head with Morse Taper attachment with 33 die sets of four |
|
|
gauging equipment Lot #223 (Sale Order 130 of 296) Lot lot of gauging equipment Starrett set of telescoping gauges, Miller depth gauge, SPI interchangeable Rod type inside micrometer |
|
|
Starrett protractors Etc Lot #224 (Sale Order 131 of 296) Starrett protractors and protractor head Plus measuring equipment |
|
|
caliper lot Lot #225 (Sale Order 132 of 296) Starrett gear tooth vernier caliper No52420\456A 2 Brown and sharp analog calipers 579-1 |
|
|
Starrett # 384 steel parallel set, etc. Lot #226 (Sale Order 133 of 296) Starrett number 384 steel parallel set, 1/8" thin parallel set, blockages, moore & Wright square, outside calipers , scribes, assorted inspection tools , etc. |
|
|
227 Lot #227 (Sale Order 134 of 296) |
|
|
dial indicator stands, Brown and sharpe dial indicators and miscellaneous parts Lot #228 (Sale Order 135 of 296) dial indicator stands, Brown and sharpe dial indicators and miscellaneous parts |
|
|
Starrett 5667 A feeler stock, Pratt and Whitney 577E Lot #229 (Sale Order 136 of 296) Starrett 5667 A feeler stock, Pratt and Whitney 577E |
|
|
2 Starrett last word dial indicators, two Federal dial indicators, indicator base and miscellaneous Lot #230 (Sale Order 137 of 296) 2 Starrett last word dial indicators, two Federal dial indicators, indicator base and miscellaneous arms |
|
|
Taft Pierce 9116-10 sine bar, 6-in sine bar,mini sine model 250 adjustable sine Lot #231 (Sale Order 138 of 296) Taft Pierce 9116-10 sine bar, 6-in sine bar,mini sine model 250 adjustable sine |
|
|
punch sets etc. Lot #232 (Sale Order 139 of 296) Do all expanding transfer punch set, transfer punch set with stand, pillman transfer ring set |
|
|
grinding parallels Lot #233 (Sale Order 140 of 296) Montgomery grinding parallels, Magna lock grinding parallels, miscellaneous accessories |
|
|
NCK 2 1/4 to 3 1/4 inside caliper, Sunnen indicator miscellaneous kit Lot #234 (Sale Order 141 of 296) NCK 2 1/4 to 3 1/4 inside caliper, Sunnen indicator miscellaneous kit |
|
|
Starrett # 199 Master Precision level Lot #235 (Sale Order 142 of 296) Starrett # 199 Master Precision level |
|
|
multiple gages Lot #236 (Sale Order 143 of 296) Plug gages, pin gages, gage blocks |
|
|
V Blocks Lot #237 (Sale Order 144 of 296) V Blocks |
|
|
Tyler Hobson sertronic 3p tester Lot #238 (Sale Order 145 of 296) Tyler Hobson sertronic 3p tester |
|
|
box of files Lot #239 (Sale Order 146 of 296) box of files |
|
|
large quantity of Vise Jaws Lot #240 (Sale Order 147 of 296) large quantity of Vise Jaws Including double step, angle protractor jaw, hardened V block jaw Etc |
|
|
Kurt D6 A 6-in Milling Vise with hard Jaws Lot #242 (Sale Order 148 of 296) Kurt D6 A 6-in Milling Vise with hard Jaws |
|
|
Kurt II 8-in Milling Vise with handle and Jaws Lot #243 (Sale Order 149 of 296) Kurt II 8-in Milling Vise with handle and Jaws |
|
|
Kurt II 8-in Milling Vise with handle and Jaws Lot #244 (Sale Order 150 of 296) Kurt II 8-in Milling Vise with handle and Jaws |
|
|
Kurt d60a 6-in Milling Vise with jaws Lot #245 (Sale Order 151 of 296) Kurt d60a 6-in Milling Vise with jaws |
|
|
Ralmike two-piece Milling Vice with jaws Lot #246 (Sale Order 152 of 296) Ralmike two-piece Milling Vice with jaws |
|
|
two-piece Milling Vise with jaws Lot #247 (Sale Order 153 of 296) two-piece Milling Vise with jaws |
|
|
Kurt d60a 6-in Milling Vise with handle, jaws, and swivel base Lot #248 (Sale Order 154 of 296) Kurt d60a 6-in Milling Vise with handle, jaws, and swivel base |
|
|
Kurt d60a 6-in Milling Vise with swivel base and Jaws Lot #249 (Sale Order 155 of 296) Kurt d60a 6-in Milling Vise with swivel base and Jaws |
|
|
Kurt D60a 6-in Milling Vise Lot #250 (Sale Order 156 of 296) Kurt D60a 6-in Milling Vise with swivel base and two jaw sets |
|
|
Milling Vise with swivel base Lot #251 (Sale Order 157 of 296) Milling Vise with swivel base |
|
|
URMA adjustable boring head model 0 5 4 2 0 1 ETC Lot #252 (Sale Order 158 of 296) URMA adjustable boring head model 0 5 4 2 0 1 Plus URMA 25 3201 adjustable boring head, seven indexable boring bars, and quantity of inserts Both have command cat 40 tool holders |
|
|
R - 8 Tool holders Lot #253 (Sale Order 159 of 296) R - 8 Tool holders |
|
|
R-8 tool holders and Milling cutters Lot #254 (Sale Order 160 of 296) R-8 tool holders and Milling cutters |
|
|
R-8 tool holders and Milling cutters Lot #255 (Sale Order 161 of 296) R-8 tool holders and Milling cutters |
|
|
R-8 Collets Lot #256 (Sale Order 162 of 296) R-8 Collets |
|
|
R-8 tool handlers and indexable face Mills Lot #257 (Sale Order 163 of 296) R-8 tool handlers and indexable face Mills |
|
|
indexable Milling cutters Lot #258 (Sale Order 164 of 296) indexable Milling cutters |
|
|
R-8 tap holders Lot #259 (Sale Order 165 of 296) R-8 tap holders |
|
|
R- 8 collets and Tool holders Lot #260 (Sale Order 166 of 296) R- 8 collets and Tool holders |
|
|
R- 8 Slotting arbors Lot #261 (Sale Order 167 of 296) R- 8 Slotting arbors |
|
|
Erickson NMT B # 30 collet Chuck and collets Lot #262 (Sale Order 168 of 296) Erickson NMT B # 30 collet Chuck and collets |
|
|
R-8 collets with collets and plastic case Lot #263 (Sale Order 169 of 296) R-8 collets with collets and plastic case |
|
|
R-8 Bridgeport collets Lot #264 (Sale Order 170 of 296) R-8 Bridgeport collets |
|
|
5-C quick-acting Collet fixture & (10) 5- C collets Lot #265 (Sale Order 171 of 296) 5-C quick-acting Collet fixture & (10) 5- C collets |
|
|
Jacobs spindle nose collet Chuck Lot #266 (Sale Order 172 of 296) Jacobs spindle nose collet Chuck With No 91-C4D 1-4 mount and (11) 1/4 in. through 1 and 3/8 inch collets in Factory tin cans. |
|
|
5c collet closures, draw bars, and 5c collets Lot #267 (Sale Order 173 of 296) Two 5c collet closures, draw bars, and nine 5c collets |
|
|
K.O. Lee No B985H 5C work head etc. Lot #268 (Sale Order 174 of 296) K.O. Lee No B985H 5C work head with seven indexing plates, adjustable base, arms, and 11 5C collets and draw bar |
|
|
5c collet indexerW/8 collets, draw bar, angle base Lot #269 (Sale Order 175 of 296) 5c collet indexerW/8 collets, draw bar, angle base |
|
|
Sadler speed diaphragm Chuck Etc Lot #270 (Sale Order 176 of 296) Sadler speed diaphragm Chuck with large quantity of Jaws and 5c spindle |
|
|
Assorted K.O. Lee grinding work heads Lot #271 (Sale Order 177 of 296) Assorted K.O. Lee grinding work heads |
|
|
K.O. Lee BA 985 radius grinding fixture Lot #272 (Sale Order 178 of 296) K.O. Lee BA 985 radius grinding fixture |
|
|
K.O Lee 5C workhead indexing, seven index plates etc. Lot #273 (Sale Order 179 of 296) K.O Lee 5C workhead indexing, seven index plates, drawbar, adjustable base, approximately 10 5c collets |
|
|
Harig # 1 Grind All U block fixture Etc. Lot #274 (Sale Order 180 of 296) Harig # 1 Grind All U block fixture 3-in Center height, case, U block hold Downs , Etc. |
|
|
Oxford Precision Rotangle Lot #275 (Sale Order 181 of 296) Oxford Precision Rotangle model# 3 24 divisions, collets and draw bar |
|
|
Atco Precision spin fixture Grind All w\v block, clamp, Etc Lot #276 (Sale Order 182 of 296) Atco Precision spin fixture Grind All w\v block, clamp, Etc |
|
|
Hardinge storgen # 5C speed collet W/ (7) 5c collets Lot #277 (Sale Order 183 of 296) Hardinge storgen # 5C speed collet W/ (7) 5c collets believed to be LO mount |
|
|
Weldon model 200 air bearing End Mill etc. Lot #278 (Sale Order 184 of 296) Weldon model 200 air bearing End Mill Sharpening fixture with second head, collets, case, owners manual |
|
|
Rack of 5C Collets Lot #279 (Sale Order 185 of 296) Rack of 5C Collets |
|
|
Sunnen & Teclock Bore Gauges Lot #280 (Sale Order 186 of 296) Sunnen & Teclock Bore Gauges |
|
|
Fowler Dial Bore Gauge 0.7 - 1.5 " Lot #281 (Sale Order 187 of 296) Fowler Dial Bore Gauge 0.7 - 1.5 " |
|
|
Starn twin grinding wheel dresser, J & S Radius etc. Lot #282 (Sale Order 188 of 296) Starn twin grinding wheel dresser, J&S radius wheel dresser, Somer Set wheel dresser |
|
|
Yauso Radius Dresser Lot #283 (Sale Order 189 of 296) Yauso Radius Dresser |
|
|
Tec lock 2"- 6" cylinder bore gauge Lot #284 (Sale Order 190 of 296) Tec lock 2"- 6" cylinder bore gauge With accessories and wooden case |
|
|
Sunnen 2"-6" Bore Gauge Lot #285 (Sale Order 191 of 296) Sunnen 2"-6" Bore Gauge with case |
|
|
Sunnen dial bore gauge Ga 2061 2"-6" Lot #286 (Sale Order 192 of 296) Sunnen dial bore gauge Ga 2061 2"-6" |
|
|
Sunnen dial bore gauge Lot #287 (Sale Order 193 of 296) Sunnen dial bore gauge |
|
|
Sunnen dial bore gauge Lot #288 (Sale Order 194 of 296) Sunnen dial bore gauge |
|
|
Sunnen GR 6000 dial bore gauge 0.74-1.19" Lot #289 (Sale Order 195 of 296) Sunnen GR 6000 dial bore gauge 0.74-1.19" |
|
|
Fec Lock .002- 1.5" with accessories and case Lot #290 (Sale Order 196 of 296) Fec Lock .002- 1.5" with accessories and case |
|
|
Sunnen CF-502 Bore gauge setting fixture 0-2" Lot #291 (Sale Order 197 of 296) Sunnen CF-502 Bore gauge setting fixture 0-2" With case and accessories |
|
|
Sunnen CF-1026 Bore gauge setting fixture 2-6" with accessories in case Lot #292 (Sale Order 198 of 296) Sunnen CF-1026 Bore gauge setting fixture 2-6" with accessories & case |
|
|
Sunnen CF 1126 bore gauge setting fixture Lot #293 (Sale Order 199 of 296) Sunnen CF 1126 bore gauge setting fixture 2-6" with accessories and case |
|
|
FOWLER - TRIMOS ELECTRONIC HEIGHT GAGE Lot #293A (Sale Order 200 of 296) FOWLER - TRIMOS ELECTRONIC HEIGHT GAGE
|
|
|
Lot of Assorted V Blocks Lot #294 (Sale Order 201 of 296) Lot of Assorted V Blocks
|
|
|
Starrett Matched Blocks No 568 & Assorted V Blocks+ Lot #295 (Sale Order 202 of 296) Starrett Matched Blocks No 568 & Assorted V Blocks+
|
|
|
Lot of Gauge Blocks Lot #296 (Sale Order 203 of 296) Lot of Gauge Blocks |
|
|
11 Gauge Blocks Special J.B. Lot #297 (Sale Order 204 of 296) 11 Gauge Blocks Special J.B.
|
|
|
9" X 15" Fixture Plate 17" X 27 1/2 " Fixture Plate Lot #299 (Sale Order 205 of 296) 9" X 15" Fixture Plate 17" X 27 1/2 " Fixture Plate |
|
|
blocks & DoAll Surface plate Lot #302 (Sale Order 206 of 296) blocks & DoAll Surface plate
|
|
|
Angled Fixture Plate 12" X 10" Lot #303 (Sale Order 207 of 296) Angled Fixture Plate 12" X 10"
|
|
|
Bison 5" 6 Jaw Chuck & Bison 4" 3 Jaw Chuck w/Extra Jaws Lot #304 (Sale Order 208 of 296) Bison 5" 6 Jaw Chuck & Bison 4" 3 Jaw Chuck w/Extra Jaws
|
|
|
Magnetic V Blocks Browne & Sharpe 750 D Lot #305 (Sale Order 209 of 296) Magnetic V Blocks Browne & Sharpe 750 D
|
|
|
Taft - Peirce Magnetic Compound Sihe Plate Machinist Grinding Chuck Lot #306 (Sale Order 210 of 296) Taft - Peirce Magnetic Compound Sihe Plate Machinist Grinding Chuck
|
|
|
Suburban Tool Permanent Magnetic Sire Plate 6" X 6" X 4 5/8" Lot #307 (Sale Order 211 of 296) Suburban Tool Permanent Magnetic Sire Plate 6" X 6" X 4 5/8"
|
|
|
Brown & Sharp 2609430 Magnetic Work Holder 9" Diameter Lot #308 (Sale Order 212 of 296) Brown & Sharp 2609430 Magnetic Work Holder 9" Diameter
|
|
|
Brown & Sharp S153 Round 4 3/4" Permanent Magnetic Chuck Lot #309 (Sale Order 213 of 296) Brown & Sharp S153 Round 4 3/4" Permanent Magnetic Chuck
|
|
|
6" X 6" X 2 3/4" Magnetic Chuck Lot #310 (Sale Order 214 of 296) 6" X 6" X 2 3/4" Magnetic Chuck
|
|
|
Magnetool Electric Magnetiz Chuck 10" X 4" Rotates Front & Back Lot #311 (Sale Order 215 of 296) Magnetool Electric Magnetiz Chuck 10" X 4" Rotates Front & Back
|
|
|
Hermann Schmidt Lot of Vises with Mahogany Case Model VO-4 Precision Lot #313 (Sale Order 216 of 296) Hermann Schmidt Lot of Vises with Mahogany Case Model VO-4 Precision
|
|
|
Troy KEU15 Horizontal/Vertical Rotary Table 15" Lot #314 (Sale Order 217 of 296) Troy KEU15 Horizontal/Vertical Rotary Table 15"
|
|
|
M & M Tool RotoGrind 710 Rotary Table Horizontal/Vertical/Serial 4044 Lot #315 (Sale Order 218 of 296) M & M Tool RotoGrind 710 Rotary Table Horizontal/Vertical/Serial 4044
|
|
|
L-W Chuck CO Dividing Head with 7 1/2" 3 Jaw Chuck Lot #316 (Sale Order 219 of 296) L-W Chuck CO Dividing Head with 7 1/2" 3 Jaw Chuck
|
|
|
Ellis 6 1/2" Model A Dividing Head w/Standard Equip. Crank Index Plates & Tail Stock Lot #318 (Sale Order 220 of 296) Ellis 6 1/2" Model A Dividing Head w/Standard Equip. Crank Index Plates & Tail Stock
|
|
|
Cushman Super Spacer 8" Vertical/Horizontal Indexer Table 8" 3 Jaw Chuck Lot #320 (Sale Order 221 of 296) Cushman Super Spacer 8" Vertical/Horizontal Indexer Table 8" 3 Jaw Chuck
|
|
|
8" Palmgren Rotary Table Lot #325 (Sale Order 222 of 296) 8" Palmgren Rotary Table
|
|
|
Bridge Part 12" Rotary Table with Tailstock Lot #326 (Sale Order 223 of 296) Bridge Part 12" Rotary Table with Tailstock
|
|
|
Ellis 12" RT Rotary Table Lot #327 (Sale Order 224 of 296) Ellis 12" RT Rotary Table
|
|
|
Enco 10" Rotary Table w/Face Plate Vertical/Horizontal Lot #328 (Sale Order 225 of 296) Enco 10" Rotary Table w/Face Plate Vertical/Horizontal
|
|
|
Volstro Shaper - Slotter Serial # 7391 Lot #330 (Sale Order 226 of 296) Volstro Shaper - Slotter Serial # 7391
|
|
|
Volstro Rotary Milling Head Serial #1442 w/Wooden Case & Collets Lot #332 (Sale Order 227 of 296) Volstro Rotary Milling Head Serial #1442 w/Wooden Case & Collets
|
|
|
Diacro Rod/ Round Shear Lot #333 (Sale Order 228 of 296) Diacro Rod/ Round Shear
|
|
|
Lot of Blacksmithing Tools Lot #334 (Sale Order 229 of 296) Lot of Blacksmithing Tools
|
|
|
Steady Rest up to 8" Diameter Fits Proto Trak Model 460 SX Lot #335 (Sale Order 230 of 296) Steady Rest up to 8" Diameter Fits Proto Trak Model 460 SX
|
|
|
Bridgeport Verticul Mill Right Angle Head R8 Adapter Lot #336 (Sale Order 231 of 296) Bridgeport Verticul Mill Right Angle Head R8 Adapter
|
|
|
3 Hp Reliance phase converter Lot #336a (Sale Order 232 of 296) 3 Hp Reliance phase converter |
|
|
Bridgeport Quill Master Type JA Multi Angle Milling Head Attachment Lot #337 (Sale Order 233 of 296) Bridgeport Quill Master Type JA Multi Angle Milling Head Attachment
|
|
|
14" four jaw Chuck Lot #338 (Sale Order 234 of 296) 14" four jaw Chuck |
|
|
Baldor Bench Grinder Lot #339 (Sale Order 235 of 296) Baldor Bench Grinder
|
|
|
Stanley Proto two-way straight jaw Fuller set Lot #340 (Sale Order 236 of 296) Stanley Proto two-way straight jaw Fuller set |
|
|
Hermann Schmidt 2 5/16' Precision Vise w/Wooden Case Lot #341 (Sale Order 237 of 296) Hermann Schmidt 2 5/16' Precision Vise w/Wooden Case
|
|
|
Hermann Schnmidt 3 1/2" Precision Vise Lot #342 (Sale Order 238 of 296) Hermann Schnmidt 3 1/2" Precision Vise
|
|
|
Hermann Schmidt 3 1/2" Precision Vice Lot #343 (Sale Order 239 of 296) Hermann Schmidt 3 1/2" Precision Vice
|
|
|
box lot of grinding blocks, parallels, jaws, Etc Lot #344 (Sale Order 240 of 296) box lot of grinding blocks, parallels, jaws, Etc |
|
|
4 Right angle blocks Lot #345 (Sale Order 241 of 296) 4 Right angle blocks |
|
|
6 ...8 ... 6 tombstone Lot #346 (Sale Order 242 of 296) 6 ...8 ... 6 tombstone |
|
|
two right angle plates Lot #347 (Sale Order 243 of 296) two right angle plates |
|
|
two right angle blocks Lot #348 (Sale Order 244 of 296) two right angle blocks |
|
|
two right angle blocks Lot #349 (Sale Order 245 of 296) two right angle blocks |
|
|
Heinrich 8" quick acting vise Lot #350 (Sale Order 246 of 296) Heinrich 8" quick acting vise |
|
|
12" 3 Jaw Chuck 4" Thru Bore Lot #351 (Sale Order 247 of 296) 12" 3 Jaw Chuck 4" Thru Bore
|
|
|
Kennedy 7 Drawer Rolling Tool Box & Contents Lot #352 (Sale Order 248 of 296) Kennedy 7 Drawer Rolling Tool Box & Contents
|
|
|
large boring bar holder with four two and a half inch diameter indexable boring bars one large V Lot #353 (Sale Order 249 of 296) large boring bar holder with four two and a half inch diameter indexable boring bars one large V block |
|
|
hydraulic pumps, tank and filter Lot #355 (Sale Order 250 of 296) hydraulic pumps, tank and filter |
|
|
Bison 3205-20. 3 jaw Chuck Lot #356 (Sale Order 251 of 296) Bison 3205-20. 3 jaw Chuck 19 5/8" diameter 7.5" thru bore D1-8 CAM lock backing plate |
|
|
20" by 48" t-block fixture plate with 3/4" T slot Lot #357 (Sale Order 252 of 296) 20" by 48" t-block fixture plate with 3/4" T slot |
|
|
Sunne mbb1650 honing machine with pg-810-s hole gauge with four cabinets of tooling including Lot #370 (Sale Order 253 of 296) Sunne mbb1650 honing machine with pg-810-s hole gauge with four cabinets of tooling including stones, mandrills, arbors |
|
|
K.O. Lee B6062B tool and cutter grinder with cabinet full of tooling as shown Lot #371 (Sale Order 254 of 296) K.O. Lee B6062B tool and cutter grinder with cabinet full of tooling as shown. |
|
|
Clark HD 5 drawer roll around cabinet with contents Lot #372 (Sale Order 255 of 296) Clark HD 5 drawer roll around cabinet with contents |
|
|
Famco 51 punch press with dye blocks and dies. Note: inspection table and cart not included. Lot #373 (Sale Order 256 of 296) Famco 51 punch press with dye blocks and dies. Note: inspection table and cart not included. |
|
|
Famco "51" Punch Press W/Die Blocks & Dies (Inspection Table & Cart Not Included) Lot #374 (Sale Order 257 of 296) Famco "51" Punch Press W/Die Blocks & Dies (Inspection Table & Cart Not Included)
|
|
|
Rockwell 118-8771 Lot #375 (Sale Order 258 of 296) Rockwell 118-8771
|
|
|
Miller CP-302 welder with 70 series wire feeder Lot #376 (Sale Order 259 of 296) Miller CP-302 welder with 70 series wire feeder. Constant voltage power supply with Miller D72D dual gun, dual drive wire feeder. 230 or 460 volt 3 phase input. Includes 2 gun, ground lead and regulator. |
|
|
miller cp302 welder with miller spoolmatic 30a spool gun Lot #377 (Sale Order 260 of 296) Miller model CP302 300 amp constant voltage welding supply with millermatic 30a aluminum spool gun and approximately 25 foot cord for spool gun. 200/230/460 volt 3 phase input |
|
|
Lincoln CV 300 mig welder with power feed 10m wire feeder Lot #378 (Sale Order 261 of 296) Lincoln CV-300 might welding power supply with power feed 10M programmble wire feeder. 208/230/460 volt 3 phase input. Includes gun. ground lead and gas hose. |
|
|
Lincoln CV 300 mig welder with power feed 10m wire feeder Lot #379 (Sale Order 262 of 296) Lincoln CV-300 might welding power supply with power feed 10M programmble wire feeder. 208/230/460 volt 3 phase input. Includes gun. ground lead and gas hose.
|
|
|
miller millermatic 251 wire feed mig welder with spool gun Lot #379A (Sale Order 263 of 296) Millermatic 251 wire feed welder with spoolmatic 30a aluminum spool gun, ground clamp and standard mig gun. 220 volt single phase input 250 amp output.
|
|
|
Lincoln ideal Arc CV 300 welder Lot #379B (Sale Order 264 of 296) Lincoln ideal Arc CV 300 welder Includes ln7 gma single gun wire feeder, mig gun, ground clamp and power cord 208/220/460 volt 3 phase input. 300 amp output |
|
|
Sprunger Model BSN14P Vertical Band Saw Lot #380 (Sale Order 265 of 296) Sprunger Model BSN14P Vertical Band Saw
|
|
|
Makita Sliding Compound Miter Saw W/Stand Lot #381 (Sale Order 266 of 296) Makita Sliding Compound Miter Saw W/Stand
|
|
|
Worthington Air Compressor Serial #EU5987 Lot #382 (Sale Order 267 of 296) Worthington Air Compressor Serial #EU5987
|
|
|
Brown & Sharpe Granite Surface Plate Lot #384 (Sale Order 268 of 296) Brown & Sharpe Granite Surface Plate
|
|
|
Rock Of Ages Surface Plate True G Granite Lot #385 (Sale Order 269 of 296) Rock Of Ages Surface Plate True G Granite
|
|
|
Ultra Matiz Vibrating Finishing Machine Model VB-10 Serial #3074 Lot #386 (Sale Order 270 of 296) Ultra Matiz Vibrating Finishing Machine Model VB-10 Serial #3074
|
|
|
Dake Arbor Press Lot #400 (Sale Order 271 of 296) Dake Arbor Press
|
|
|
Weaver C frame press with hydraulic pump Lot #400A (Sale Order 272 of 296) Weaver C frame press with hydraulic pump
|
|
|
41x96x1.75" thick heavy Welding Table Lot #400B (Sale Order 273 of 296) 41x96x1.75" thick heavy Welding Table. Drilled and tapped for clamp downs. Also includes 2 welding helmets and several hold down fixtures.
|
|
|
DaAll Model 1612-0 Serial # 209-671385 Vertical Band Saw Includes Tooling & DoAll Welder Mod DBW-12B Lot #401 (Sale Order 274 of 296) DaAll Model 1612-0 Serial # 209-671385 Vertical Band Saw Includes Tooling & DoAll Welder Mod DBW-12B & Spare Blades
|
|
|
ELB High Precision Surface & Profile Grinding Machine Model SWSVAI HI Lot #402 (Sale Order 275 of 296) ELB High Precision Surface & Profile Grinding Machine Model SWSVAI HI
|
|
|
SaJo UF-54 Horizontal & Vertical Milling Machine 11"x52" Table Accurite 2 axis DRO Lots Of Tooling Lot #403 (Sale Order 276 of 296) SaJo VF-54 Horizontal & Vertical Milling Machine 11"x52" Table Accurite 2 axis DRO Lots Of Tooling Included. Six horizontal arbors, 2 horizontal arbor supports. VRF 52 Vertical head plus large quantity tool holders and draw bars. |
|
|
tool scoot with cat 40 tooling Lot #403a (Sale Order 277 of 296) HUOT tool scoot with cat 40 tooling, tool holder Etc. See pictures |
|
|
ELB High Precision Surface & Profile Grinding Machine Model SW4VA11 Lot #404 (Sale Order 278 of 296) ELB High Precision Surface & Profile Grinding Machine Model SW4VA11 W/4"x10" Electronic Magnetic Chuck that Rotates Front & Back
|
|
|
Harig 618W Grinder With 6"x18" Magnetic Chuck & Tooling Lot #405 (Sale Order 279 of 296) Harig 618W Grinder With 6"x18" Magnetic Chuck & Tooling
|
|
|
Cincinnati 13"x60" LR Lathe Serial #55012-73-4 460v 3ph, 2-3 Jaw 8",1-8"4 Jaw Chucks Included Lot #406 (Sale Order 280 of 296) Cincinnati 13"x60" LR Lathe Serial #55012-73-4 460v 3ph, 2-3 Jaw 8",1-8"4 Jaw Chucks Included, Aloris Quick Change Tool Post, 2 Steady Rests Included W/Tail Stock
|
|
|
Harig Super 612 Grinder w/Magnetic Chuck Lot #407 (Sale Order 281 of 296) Harig Super 612 Grinder w/Magnetic Chuck
|
|
|
Bridgeport Manual Mill With Series 2 Variable Speed Head, table 9"x48" Lot #408 (Sale Order 282 of 296) Bridgeport Manual Mill With Series 2 Variable Speed Head, table 9"x48". Power Feed On X,Y & Knee, DRO on X,Y,Z, Digital Indicator on Quill, Power Draw Bar, R-8 Collets Included, BiJur 1 Pump Lube System
|
|
|
Grisetti RT/A600 Universal Cylindrical Grinder, Year 1980, Serial # 1376, 220v, 3phase, Lot #409 (Sale Order 283 of 296) Grisetti RT/A600 Universal Cylindrical Grinder, Year 1980, Serial # 1376, 220v, 3phase, Comes With Steady Rest, Follow Rest Tooling, Accessories & Manuals
|
|
|
Mega Model BS-250HAS Band Saw With Auto Feed, Spare Blade & Manuals Lot #410 (Sale Order 284 of 296) Mega Model BS-250HAS Band Saw With Auto Feed, Spare Blade & Manuals
|
|
|
DoAll Model C-10 Band Saw W/Auto Feed, Serial# 344-77307 W/Conveyor & Spare Blades Lot #411 (Sale Order 285 of 296) DoAll Model C-10 Band Saw W/Auto Feed, Serial# 344-77307 W/Conveyor & Spare Blades, 240v, 3 phase
|
|
|
Bridgeport Manual Milling Machine, Step Pully Drive, J-Head Machine, 9"X42" Table Lot #412 (Sale Order 286 of 296) Bridgeport Manual Milling Machine, Step Pully Drive, J-Head Machine, 9"X42" Table, Power Feed On Axis 220v 3phase
|
|
|
Bridgeport Manual Mill W/Accurite III DRO Step Pulley Drive J-Head Machine Lot #413 (Sale Order 287 of 296) Bridgeport Manual Mill W/Accurite III DRO Step Pulley Drive J-Head Machine, 9"X42" Table, Power Feed On Axis, BiJur 1 Shot Lube System, 220v 3phase
|
|
|
Rockford Lathe 100HX45 8" Chuck With Tail Stock & Tool Post Lot #414 (Sale Order 288 of 296) Rockford Lathe 100HX45 8" Chuck With Tail Stock & Tool Post
|
|
|
ACER 1760G E-Lathe 2014 Serial # 1N14040159 230v 3phase, W/Steady Rest, 10" Chucks Lot #415 (Sale Order 289 of 296) ACER 1760G E-Lathe 2014 Serial # 1N14040159 230v 3phase, W/Steady Rest, 10" Chucks, Quick Change Collets, Tool Posts W/Tooling, Newall E70-CSS DRO
|
|
|
Compressed Air Systems Model RSZ53ENC-CRD-62 Serial# 061813 125psi Air Compressor, 460v-480v, Lot #416 (Sale Order 290 of 296) Compressed Air Systems Model RSZ53ENC-CRD-62 Serial# 061813 125psi Air Compressor, 460v-480v, Very Clean! 80 gal Tank
|
|
|
DC Morrison key seating machine 1 and 1/4 Lot #416A (Sale Order 291 of 296) DC Morrison key seating machine 1 and 1/4
|
|
|
Hurco KM3 Serial# SDD-9005081A 3 Axis CNC Mill, 240v 3phase, 12"x42" Table, Includes Tooling & Manua Lot #417 (Sale Order 292 of 296) Hurco KM3 Serial# SDD-9005081A 3 Axis CNC Mill, 240v 3phase, 12"x42" Table, Includes Tooling & Manuals
|
|
|
Hyster S120XM Forklift. 12,000 lb Capacity Lot #418 (Sale Order 293 of 296) Hyster S120XM Forklift. 12,000 lb Capacity at 24" load center, Propane, side shift, heavy duty 6 ft forks (like new), solid tires, approx 3600 hours. Works well. No major leaks.
|
|
|
Allis Chalmers forklift Lot #419 (Sale Order 294 of 296) Allis Chalmers forklift 5,000 lb capacity, does run. |
|
|
2004 Sea Boss boat Lot #420 (Sale Order 295 of 296) 2004 seaboss 220 WA boat, motor and trailer. 150 horsepower Johnson/ Evinrude oil injected out board motor, tandem axle trailer. 22 ft walk around style boat with Cuddy cabin. Boat has been primarily used in freshwater. It is in good shape and runs well. Title for both boat and trailer. |
|
|
Hyster 2 stage forklift, 10,000 lb Lift Capacity Lot #421 (Sale Order 296 of 296) Hyster 2 stage forklift mode H 100 |
|
