|
|||
|
|
OZARK SHAVINGS CO LLC |
|
| Industrial Machinery & Equipment > Associated Auction & Liquidation Co > OZARK SHAVINGS CO LLC | |
|
OZARK SHAVINGS CO LLC |
|
|
by Associated Auction & Liquidation Co
Sat,
Dec
9,
2023
9:00 AM
Central
ENTIRE SHAVINGS OPERATION TO BE SOLD IN ITS ENTIRETY OR PIECEMEAL INCLUDING DRUM DRYER, ELECTRICAL, RETHCEIF AUTOMATIC BAGGER & ROBOT, 2 HIGH CAP SHAVERS & ROLLING STOCK
|
|
|
Bulk bid includes Lot 10-108 & Lots 150,151,& 157 Lot #1 (Sale Order 1 of 202) Ozark Shavings Co, LLC will be offered in its Entirety minus the Rolling Stock. Bulk Lot to be offered as Lot 10 - 108 & Lots 150,151, and 157. It will then be offered piecemeal. Whichever figure is highest is the way it will be sold. Auctioneer reserves the right to declare a Bulk Sale at any time. The land is available for lease. The removal time for equipment purchased is 60 days. You can preview equipment at any time. For rigging info you may contact Ace Baker at 417-818-9929. For more information on buying as an entirety please contact Chuck Lepinski at 612-390-1844.
|
|
|
Cambio 30in Ring Debarker, 75hp Mtr, Sells w/ Subframe & Catwalk Lot #10 (Sale Order 2 of 202) Cambio 30in Ring Debarker, 75hp Mtr, Sells w/ Subframe & Catwalk
|
|
|
20hp Hydraulic Power Pack Lot #11 (Sale Order 3 of 202) 20hp Hydraulic Power Pack
|
|
|
23ft x 11in Wide Ladderback Chain Waste Conveyor w/ Elec Drv Lot #12 (Sale Order 4 of 202) 23ft x 11in Wide Ladderback Chain Waste Conveyor w/ Elec Drv
|
|
|
Tie Back Lots 10, 11 & 12 w/ 10% Raise Lot #12T (Sale Order 5 of 202) Tie Back Lots 10, 11 & 12 w/ 10% Raise
|
|
|
13ft x 9in Ladderback Chain Infeed Log Conveyor, Pivots on One End w/ Cylinders on Opposite End, Ele Lot #13 (Sale Order 6 of 202) 13ft x 9in Ladderback Chain Infeed Log Conveyor, Pivots on One End w/ Cylinders on Opposite End, Elec Drv
|
|
|
Morbark 25ft x 19in Track Chain, Outfeed Log Conveyor w/ Elec Drv Lot #14 (Sale Order 7 of 202) Morbark 25ft x 19in Track Chain, Outfeed Log Conveyor w/ Elec Drv
|
|
|
60ft x 11in Ladderback Chain Log Conveyor w/ Elec Drv Lot #15 (Sale Order 8 of 202) 60ft x 11in Ladderback Chain Log Conveyor w/ Elec Drv
|
|
|
25ft 6in Wide x 20ft Log Deck w/ Stop N Load, Elec Drv Lot #16 (Sale Order 9 of 202) 25ft 6in Wide x 20ft Log Deck w/ Stop N Load, Elec Drv
|
|
|
Morbark 30ft x 11in Ladderback Chain Log Conveyor w/ 2 Arm Log Sweep & (1) 3 Arm Log Sweep Lot #17 (Sale Order 10 of 202) Morbark 30ft x 11in Ladderback Chain Log Conveyor w/ 2 Arm Log Sweep & (1) 3 Arm Log Sweep
|
|
|
Log Merchandising System w/ 5ft Bar Cutter w/ 15hp Mtr, 14ft x 24in Hourglass Rollcase Outfeed, Cab, Lot #18 (Sale Order 11 of 202) Log Merchandising System w/ 5ft Bar Cutter w/ 15hp Mtr, 14ft x 24in Hourglass Rollcase Outfeed, Cab, Controls, Catwalk & Steps Surrounding Cab & Bar Cutter
|
|
|
32ft x 11in Ladderback Chain Log Conveyor w/ Elec S-Drive (Infeed) Lot #19 (Sale Order 12 of 202) 32ft x 11in Ladderback Chain Log Conveyor w/ Elec S-Drive (Infeed)
|
|
|
40ft Wide x 22ft Log Deck w/ Stop N Loader, Elec Drv (Infeed) Lot #20 (Sale Order 13 of 202) 40ft Wide x 22ft Log Deck w/ Stop N Loader, Elec Drv (Infeed)
|
|
|
48ft x 11in Ladderback Chain Outfeed Log Conveyor w/ Elec S-Drive (An 11ft Section of Conveyor has A Lot #21 (Sale Order 14 of 202) 48ft x 11in Ladderback Chain Outfeed Log Conveyor w/ Elec S-Drive (An 11ft Section of Conveyor has Approx. 18in Incline) This Conveyor has a Custom Built 45in Wide 2 Arm Log Sweep
|
|
|
42ft x 11in Ladderback Chain Outfeed Log Conveyor w/ Custom Built 6ft Wide 2 Arm Log Sweep w/ Elec D Lot #22 (Sale Order 15 of 202) 42ft x 11in Ladderback Chain Outfeed Log Conveyor w/ Custom Built 6ft Wide 2 Arm Log Sweep w/ Elec Drv
|
|
|
48ft 16in x 12in Deep Vibratory Conveyor w/ Drv Lot #23 (Sale Order 16 of 202) 48ft 16in x 12in Deep Vibratory Conveyor w/ Drv
|
|
|
50hp Hydraulic Power Pack Lot #24 (Sale Order 17 of 202) 50hp Hydraulic Power Pack
|
|
|
Prentice D410B Stationary Knuckleboom Loader S/N 410P22929 Lot #25 (Sale Order 18 of 202) Prentice D410B Stationary Knuckleboom Loader S/N 410P22929
|
|
|
Douglas 1040 6 Hd Shavings Mill, 50hp Mtr on Heads, 40in Wide x 10ft Long x 47in Deep Material Box w Lot #26 (Sale Order 19 of 202) Douglas 1040 6 Hd Shavings Mill, 50hp Mtr on Heads, 40in Wide x 10ft Long x 47in Deep Material Box w/ (6) 60 Amp Disconnects, 30in Wide Discharge Belt, Catwalk Surrounding Shavings Mill
|
|
|
Electrical Control Cabinets (3-1) (3-2) w/ 600 Amp Breaker Disconnect, (5) Benshaw EMX4I Motor Contr Lot #27 (Sale Order 20 of 202) Electrical Control Cabinets (3-1) (3-2) w/ 600 Amp Breaker Disconnect, (5) Benshaw EMX4I Motor Controls. (1) PSE 142-600-70 Motor Control, (1) ABB 10hp Motor Control, (1) Amtech 75 KW Motor Control
|
|
|
Tie Back Lots #26 & 27 w/ 10% Raise Lot #27T (Sale Order 21 of 202) Tie Back Lots #26 & 27 w/ 10% Raise
|
|
|
7ft 3in x 32ft x 3 Strand Package Deck (Infeed) w/ Elec Drv Lot #28 (Sale Order 22 of 202) 7ft 3in x 32ft x 3 Strand Package Deck (Infeed) w/ Elec Drv
|
|
|
8ft 3in x 11ft 8in x 3 Strand Log Deck w/ Stop N Loader, Elec Drv, 1 Chain Missing (Infeed) Lot #29 (Sale Order 23 of 202) 8ft 3in x 11ft 8in x 3 Strand Log Deck w/ Stop N Loader, Elec Drv, 1 Chain Missing (Infeed)
|
|
|
Douglas 840 Plus 5 Hd Shavings Mill, 50hp Mtrs on Heads, 40in Wide x 8ft x 31in Deep Material Box, 3 Lot #30 (Sale Order 24 of 202) Douglas 840 Plus 5 Hd Shavings Mill, 50hp Mtrs on Heads, 40in Wide x 8ft x 31in Deep Material Box, 36in Wide Discharge Belt, (5) 60 Amp Disconnects & Catwalk Surrounding Shavings Mill Note: Discharge Belt Conveyor Drive End has to be Separated From Lot #26
|
|
|
Electrical Control Cabinet w/ 4 Benshaw 85 Amp Motor Controls (1) Benshaw EMX4I Motor Control, (1) Y Lot #31 (Sale Order 25 of 202) Electrical Control Cabinet w/ 4 Benshaw 85 Amp Motor Controls (1) Benshaw EMX4I Motor Control, (1) Yaskawa A1000 Motor Control
|
|
|
Tie Back Lots #30 & 31 w/ 10% Raise Lot #31T (Sale Order 26 of 202) Tie Back Lots #30 & 31 w/ 10% Raise
|
|
|
4ft x 27ft x 2 Strand Package Deck w/ Elec Drv (Infeed) Lot #32 (Sale Order 27 of 202) 4ft x 27ft x 2 Strand Package Deck w/ Elec Drv (Infeed)
|
|
|
4ft 10in x 10ft x 2 Strand Package Deck w/ Elec Drv (Infeed) Lot #33 (Sale Order 28 of 202) 4ft 10in x 10ft x 2 Strand Package Deck w/ Elec Drv (Infeed)
|
|
|
1 Ton Overhead Electric Chain Hoist w/ 118in Wide x 16ft Long x 15ft High Steel Frame, Sells w/ Grap Lot #34 (Sale Order 29 of 202) 1 Ton Overhead Electric Chain Hoist w/ 118in Wide x 16ft Long x 15ft High Steel Frame, Sells w/ Grapple
|
|
|
26 Sets of 40in Long Used Cutter Head Knives foe Douglas Shaving Mill Lot #34A (Sale Order 30 of 202) 26 Sets of 40in Long Used Cutter Head Knives foe Douglas Shaving Mill
|
|
|
(7) Sets of New 40in Cutter Head Knives for Douglas Shaving Mill Lot #34B (Sale Order 31 of 202) (7) Sets of New 40in Cutter Head Knives for Douglas Shaving Mill
|
|
|
New Parts for Douglas Shaving Mill, (3) Flat Wheels (2) Grooved Wheels, Fits 1040 & 840 Lot #34C (Sale Order 32 of 202) New Parts for Douglas Shaving Mill, (3) Flat Wheels (2) Grooved Wheels, Fits 1040 & 840
|
|
|
Used Bed Plate for Douglas Shaving Mill Lot #34D (Sale Order 33 of 202) Used Bed Plate for Douglas Shaving Mill
|
|
|
1 Ton Overhead Electric Chain Hoist w/ Grapple Lot #35 (Sale Order 34 of 202) 1 Ton Overhead Electric Chain Hoist w/ Grapple
|
|
|
Electric Control Cabinet w/ 25 Fuji SC-E2 Motor Starters Lot #36 (Sale Order 35 of 202) Electric Control Cabinet w/ 25 Fuji SC-E2 Motor Starters
|
|
|
(2) Electrical Boxes w/ 150 Amp Breakers, (1) Fuji SC-E6, (1) Fuji SC-E7 Motor Starters Lot #36B (Sale Order 36 of 202) (2) Electrical Boxes w/ 150 Amp Breakers, (1) Fuji SC-E6, (1) Fuji SC-E7 Motor Starters
|
|
|
Remaining Catwalk & Steps in Shavings Mill Building, (1) 3ft x 24ft Section w/ 7 Steps, (1) 3ft x 24 Lot #37 (Sale Order 37 of 202) Remaining Catwalk & Steps in Shavings Mill Building, (1) 3ft x 24ft Section w/ 7 Steps, (1) 3ft x 24ft Section w/ 8 Steps, (1) 3ft x 9ft Section, (1) 3ft x 20ft Section, (1) 9ft x 10ft Section, (1) 6ft x 10ft Section w/ 4 Steps
|
|
|
2021 Kaiser 75hp Rotary Screw Air Compressor, Mdl #KRSD-75-115, Total Hrs 6,436, Load Hrs at Time of Lot #38 (Sale Order 38 of 202) 2021 Kaiser 75hp Rotary Screw Air Compressor, Mdl #KRSD-75-115, Total Hrs 6,436, Load Hrs at Time of Write Up 3,762 S/N 5S2108817U
|
|
|
Vertical Air Receiver Tank Lot #39 (Sale Order 39 of 202) Vertical Air Receiver Tank
|
|
|
200 Amp Disconnect Lot #40 (Sale Order 40 of 202) 200 Amp Disconnect
|
|
|
20in x 16ft Belt Conveyor w/ 10in Deep Sides, Elec Drv Lot #41 (Sale Order 41 of 202) 20in x 16ft Belt Conveyor w/ 10in Deep Sides, Elec Drv
|
|
|
24in x 45ft Belt Conveyor w/ 10in Deep Sides, Elec Drv Lot #42 (Sale Order 42 of 202) 24in x 45ft Belt Conveyor w/ 10in Deep Sides, Elec Drv
|
|
|
36in x 45ft Covered Belt Conveyor w/ 10in Deep Sides, Elec Drv Lot #43 (Sale Order 43 of 202) 36in x 45ft Covered Belt Conveyor w/ 10in Deep Sides, Elec Drv
|
|
|
Progress 24in Wide x 33ft Even Flow Vibratory Conveyor, Mdl #2433, Unit has been Fitted W/ 75in Wide Lot #44 (Sale Order 44 of 202) Progress 24in Wide x 33ft Even Flow Vibratory Conveyor, Mdl #2433, Unit has been Fitted W/ 75in Wide x 67in High x 30ft Long Steel Enclosure w/ Compressed Air Nozzels
|
|
|
12in x 48ft Belt Conveyor w/ 5 3/4in Deep Sides, Elec Drv (Return Belt) Lot #45 (Sale Order 45 of 202) 12in x 48ft Belt Conveyor w/ 5 3/4in Deep Sides, Elec Drv (Return Belt)
|
|
|
24in x 40ft Covered Belt Conveyor w/ 10in Deep Sides, Elec Drv (Infeed to Drum Dryer) Lot #46 (Sale Order 46 of 202) 24in x 40ft Covered Belt Conveyor w/ 10in Deep Sides, Elec Drv (Infeed to Drum Dryer)
|
|
|
Steel Steps 36in Wide x 11 Steps High by Lot #44 Lot #47 (Sale Order 47 of 202) Steel Steps 36in Wide x 11 Steps High by Lot #44
|
|
|
2015 Baker / Rullman 12.5ft x 48ft 3 Stage Drum Dryer w/ Drv, Air Lock Mdl #SD125-48 Lot #48 (Sale Order 48 of 202) 2015 Baker / Rullman 12.5ft x 48ft 3 Stage Drum Dryer w/ Drv, Air Lock Mdl #SD125-48
|
|
|
2009 Webb 30 Million BTU Wood Waste Fired Burner w 7.5hp Blower Feeder, 5 Blowers on Burner Unit & C Lot #49 (Sale Order 49 of 202) 2009 Webb 30 Million BTU Wood Waste Fired Burner w 7.5hp Blower Feeder, 5 Blowers on Burner Unit & Controls
|
|
|
12ft Dia. Boiler Fuel Feeder Bin w/ Shop Built Air Lock, Feeder Unit, Approx 3ft Cyclone on Top of B Lot #50 (Sale Order 50 of 202) 12ft Dia. Boiler Fuel Feeder Bin w/ Shop Built Air Lock, Feeder Unit, Approx 3ft Cyclone on Top of Bin
|
|
|
200hp 6ft Blower w/ Pipe to Cyclone Lot #51 (Sale Order 51 of 202) 200hp 6ft Blower w/ Pipe to Cyclone
|
|
|
12ft Cyclone w/ Subframe Lot #52 (Sale Order 52 of 202) 12ft Cyclone w/ Subframe
|
|
|
Tieback Lot# 48, 49, 50, 51, & 52 Lot #52T (Sale Order 53 of 202) Tieback Lot# 48, 49, 50, 51, & 52
|
|
|
Progress 8ft x 12ft Chip Screen, 3 Sort, Mdl #812 S/N 011203 Lot #53 (Sale Order 54 of 202) Progress 8ft x 12ft Chip Screen, 3 Sort, Mdl #812 S/N 011203
|
|
|
Bliss Eliminator 30in Vertical Fed Hammer Mill w/ Direct Drive 125hp Motor w/ Outfeed Duct Work to B Lot #54 (Sale Order 55 of 202) Bliss Eliminator 30in Vertical Fed Hammer Mill w/ Direct Drive 125hp Motor w/ Outfeed Duct Work to Blower
|
|
|
200 Amp Fused Disconnect Lot #55 (Sale Order 56 of 202) 200 Amp Fused Disconnect
|
|
|
28in x 16ft Belt Conveyor w/ 12in Deep Sides, Elec Drv (Infeed to Bliss Hog) Lot #56 (Sale Order 57 of 202) 28in x 16ft Belt Conveyor w/ 12in Deep Sides, Elec Drv (Infeed to Bliss Hog)
|
|
|
18in x 30ft Belt Conveyor w/ 6in Deep Sides, Elec Drv (Drum to Hog Infeed) Lot #57 (Sale Order 58 of 202) 18in x 30ft Belt Conveyor w/ 6in Deep Sides, Elec Drv (Drum to Hog Infeed)
|
|
|
13in x 18ft Belt Conveyor w/ 6in Deep Sides, Elec Drv Lot #58 (Sale Order 59 of 202) 13in x 18ft Belt Conveyor w/ 6in Deep Sides, Elec Drv
|
|
|
13in x 16ft Belt Conveyor w/ 6in Deep Sides, Elec Drv Lot #59 (Sale Order 60 of 202) 13in x 16ft Belt Conveyor w/ 6in Deep Sides, Elec Drv
|
|
|
36in Blower w/ 60hp Motor, Pipe to Cyclone Lot #60 (Sale Order 61 of 202) 36in Blower w/ 60hp Motor, Pipe to Cyclone
|
|
|
(6) Fused Disconnects (1) 100 Amp & (5) 30 Amps Lot #61 (Sale Order 62 of 202) (6) Fused Disconnects (1) 100 Amp & (5) 30 Amps
|
|
|
5ft Cyclone, No Frame Lot #62 (Sale Order 63 of 202) 5ft Cyclone, No Frame
|
|
|
22in x 14ft Covered Belt Conveyor w/ 16in Deep Sides, Elec Drv Lot #63 (Sale Order 64 of 202) 22in x 14ft Covered Belt Conveyor w/ 16in Deep Sides, Elec Drv
|
|
|
9in x 145ft Single Chain Tube Conveyor w/ 45 Degree Vertical Sweep Lot #64 (Sale Order 65 of 202) 9in x 145ft Single Chain Tube Conveyor w/ 45 Degree Vertical Sweep
|
|
|
BM & M 3ft x 8ft Chip Screen Lot #65 (Sale Order 66 of 202) BM & M 3ft x 8ft Chip Screen
|
|
|
14in x 58ft Covered Belt Conveyor w/ 8in Deep Sides, Elec Drv Lot #66 (Sale Order 67 of 202) 14in x 58ft Covered Belt Conveyor w/ 8in Deep Sides, Elec Drv
|
|
|
16in Blower w/ 10hp Motor & Pipe to Cyclone Lot #67 (Sale Order 68 of 202) 16in Blower w/ 10hp Motor & Pipe to Cyclone
|
|
|
24in x 22ft Belt Conveyor w/ 12in Deep Sides, Elec Drv Lot #68 (Sale Order 69 of 202) 24in x 22ft Belt Conveyor w/ 12in Deep Sides, Elec Drv
|
|
|
24in x 18ft Belt Conveyor w/ 12in Deep Sides, Elec Drv Lot #69 (Sale Order 70 of 202) 24in x 18ft Belt Conveyor w/ 12in Deep Sides, Elec Drv
|
|
|
24in x 28ft Covered Belt Conveyor w/ 12in Deep Sides, Elec Drv Lot #70 (Sale Order 71 of 202) 24in x 28ft Covered Belt Conveyor w/ 12in Deep Sides, Elec Drv
|
|
|
28in x 42ft Covered Belt Conveyor w/ 12in Deep Sides, Elec Drv Lot #71 (Sale Order 72 of 202) 28in x 42ft Covered Belt Conveyor w/ 12in Deep Sides, Elec Drv
|
|
|
New York 24in Blower w/ 15hp Motor & Pipe to Cyclone Lot #72 (Sale Order 73 of 202) New York 24in Blower w/ 15hp Motor & Pipe to Cyclone
|
|
|
5ft Cylone Lot #73 (Sale Order 74 of 202) 5ft Cylone
|
|
|
10in x 18ft Covered Auger Conveyor w/ Elec Drv Lot #74 (Sale Order 75 of 202) 10in x 18ft Covered Auger Conveyor w/ Elec Drv
|
|
|
24in x 40ft Belt Conveyor w/ 9in Deep Sides, Elec Drv Lot #75 (Sale Order 76 of 202) 24in x 40ft Belt Conveyor w/ 9in Deep Sides, Elec Drv
|
|
|
9ft Long x 4ft Feed Hopper w/ Powered Material Beater Note: This Hopper was Designed to be Used with Lot #76 (Sale Order 77 of 202) 9ft Long x 4ft Feed Hopper w/ Powered Material Beater Note: This Hopper was Designed to be Used with 24in Wide Belt Conveyor, Lot #75
|
|
|
28in x 30ft Belt Conveyor w/ Elec Drv Lot #77 (Sale Order 78 of 202) 28in x 30ft Belt Conveyor w/ Elec Drv
|
|
|
36in x 22ft Belt Conveyor w/ 9in Sides, Elec Drv (Overhead) Lot #78 (Sale Order 79 of 202) 36in x 22ft Belt Conveyor w/ 9in Sides, Elec Drv (Overhead)
|
|
|
24in x 52ft Belt Conveyor w/ 13in Sides, Elec S-Drive (Feeds Blending Bin) Lot #79 (Sale Order 80 of 202) 24in x 52ft Belt Conveyor w/ 13in Sides, Elec S-Drive (Feeds Blending Bin)
|
|
|
14in x 40ft Belt Conveyor w/ 12in Deep Sides, Elec Drv Lot #80 (Sale Order 81 of 202) 14in x 40ft Belt Conveyor w/ 12in Deep Sides, Elec Drv
|
|
|
7ft x 12ft Blending Bin w/ Live Bottom, Augered Lot #81 (Sale Order 82 of 202) 7ft x 12ft Blending Bin w/ Live Bottom, Augered
|
|
|
Preliminary Mixing Hopper Consists of a Morbark 22in Wide x 25ft Long Vibratory Conveyor, 16in x 25f Lot #82 (Sale Order 83 of 202) Preliminary Mixing Hopper Consists of a Morbark 22in Wide x 25ft Long Vibratory Conveyor, 16in x 25ft Powered Auger, (1) 31in x 26ft Sloped Steel Side, (1) 48in x 26ft Sloped Steel Side
|
|
|
26in x 28ft Belt Conveyor w/ 12in Deep Sides w/ Elec Drv (Feeds Blending Bin from Mixing Hopper) Lot #83 (Sale Order 84 of 202) 26in x 28ft Belt Conveyor w/ 12in Deep Sides w/ Elec Drv (Feeds Blending Bin from Mixing Hopper)
|
|
|
35in x 45ft Concave Belt Conveyor w/ Elec Drv (Belt Feeds Feed Hopper) Lot #84 (Sale Order 85 of 202) 35in x 45ft Concave Belt Conveyor w/ Elec Drv (Belt Feeds Feed Hopper)
|
|
|
Rethceif Packaging Shavings Bagger w/ Control Cabinet, Bag Sealer, All Dust Pipe to Blower, S/N HC20 Lot #85 (Sale Order 86 of 202) Rethceif Packaging Shavings Bagger w/ Control Cabinet, Bag Sealer, All Dust Pipe to Blower, S/N HC2020-12558-A001, Safety Barrier
|
|
|
100hp Hyd Power Pack w/ Dual Oil Gear PVG-130, Hyd Pumps, 4 Directional Valves (Runs Bagger) Lot #86 (Sale Order 87 of 202) 100hp Hyd Power Pack w/ Dual Oil Gear PVG-130, Hyd Pumps, 4 Directional Valves (Runs Bagger)
|
|
|
Bag Positioner w/ 26in x 12ft Powered Rollcase Lot #87 (Sale Order 88 of 202) Bag Positioner w/ 26in x 12ft Powered Rollcase
|
|
|
Kawasaki Robot Mdl #3CP180L-AC02, S/N 3CP180C00042 w/ Controller Unit Includes Hand Held Mdl #30E03E Lot #88 (Sale Order 89 of 202) Kawasaki Robot Mdl #3CP180L-AC02, S/N 3CP180C00042 w/ Controller Unit Includes Hand Held Mdl #30E03E-AC01, S/N 30E03EC00056
|
|
|
Rethceif 52in x 36ft Powered Rollcase w/ Pallet Positioner Lot #89 (Sale Order 90 of 202) Rethceif 52in x 36ft Powered Rollcase w/ Pallet Positioner
|
|
|
Rethceif Pallet Dispensing Unit Lot #90 (Sale Order 91 of 202) Rethceif Pallet Dispensing Unit
|
|
|
Electrical Control Cabinet for Lots #87, 89 & 90 Lot #91 (Sale Order 92 of 202) Electrical Control Cabinet for Lots #87, 89 & 90
|
|
|
Phoenix Pallet Wrapper Mdl #PRRA-3000, S/N 17103915 Lot #92 (Sale Order 93 of 202) Phoenix Pallet Wrapper Mdl #PRRA-3000, S/N 17103915
|
|
|
Safety Barrier Surrounding Lots #87, 88, 89, 90 & 92 Lot #93 (Sale Order 94 of 202) Safety Barrier Surrounding Lots #87, 88, 89, 90 & 92
|
|
|
Tie Back Lots #85, 86, 87, 88, 89, 90, 91, 92 & 93 w/ 10% Raise Lot #93T (Sale Order 95 of 202) Tie Back Lots #85, 86, 87, 88, 89, 90, 91, 92 & 93 w/ 10% Raise
|
|
|
4ft x 10ft Live Bottom Feed Hopper w/ 12ft Auger (Feeds Rethceif Bagger) Lot #94 (Sale Order 96 of 202) 4ft x 10ft Live Bottom Feed Hopper w/ 12ft Auger (Feeds Rethceif Bagger)
|
|
|
"Roll" Lifting Dolly Lot #95 (Sale Order 97 of 202) "Roll" Lifting Dolly
|
|
|
"Roll" Lifting Attachment for Forklift Lot #96 (Sale Order 98 of 202) "Roll" Lifting Attachment for Forklift
|
|
|
(2) Forklift Mounted Roll Dispensers Lot #97 (Sale Order 99 of 202) (2) Forklift Mounted Roll Dispensers
|
|
|
Air Base Polar Air 50hp Rotary Screw Air Compressor Mdl #PRV050003, S/N 40391, 1,966 Total Hrs, 954 Lot #98 (Sale Order 100 of 202) Air Base Polar Air 50hp Rotary Screw Air Compressor Mdl #PRV050003, S/N 40391, 1,966 Total Hrs, 954 Load Hrs
|
|
|
Vertical Air Receiver Tank Lot #99 (Sale Order 101 of 202) Vertical Air Receiver Tank
|
|
|
Ingersoll Rand Refrigerant Compressed Air Dryer, 115 V Single Phase, Mdl #D25SNC-A16-100, S/N WCH102 Lot #100 (Sale Order 102 of 202) Ingersoll Rand Refrigerant Compressed Air Dryer, 115 V Single Phase, Mdl #D25SNC-A16-100, S/N WCH1023801
|
|
|
2000 Amp Square D Main Service Switch Gear w/ (1) 600 Amp Breaker (3) 400 Amp Breakers (1) 300 Amp B Lot #100A (Sale Order 103 of 202) 2000 Amp Square D Main Service Switch Gear w/ (1) 600 Amp Breaker (3) 400 Amp Breakers (1) 300 Amp Breaker (1) 250 Amp Breaker (1) 200 Amp Breaker (1) 100 Amp Breaker (2) 600 Amp Breakers & (1) 30 Amp Breaker
|
|
|
Electrical Control Cabinet w/ 200 Amp Breaker Disconnect, (2) Amtech 60hp Motor Controls Lot #100B (Sale Order 104 of 202) Electrical Control Cabinet w/ 200 Amp Breaker Disconnect, (2) Amtech 60hp Motor Controls
|
|
|
Electrical Control Cabinet w/ 14 Schneider Electric Small HP Motor Contactors Lot #100C (Sale Order 105 of 202) Electrical Control Cabinet w/ 14 Schneider Electric Small HP Motor Contactors
|
|
|
(2) Electrical Control Cabinets w/ Relays, (1) Cabinet is Located in Electrical Room, Other Cabinet Lot #100D (Sale Order 106 of 202) (2) Electrical Control Cabinets w/ Relays, (1) Cabinet is Located in Electrical Room, Other Cabinet is Located in Shavings Mill Building
|
|
|
Square D 45KVA Transformer 480V Primary, 208-120V Secondary w/ 200 Amp Single Phase Breaker Box Lot #100E (Sale Order 107 of 202) Square D 45KVA Transformer 480V Primary, 208-120V Secondary w/ 200 Amp Single Phase Breaker Box
|
|
|
40ft Container, Interior Retrofitted w/ Stainless Steel Ceiling & Sidewalls, Plywood Floor, Does not Lot #100F (Sale Order 108 of 202) 40ft Container, Interior Retrofitted w/ Stainless Steel Ceiling & Sidewalls, Plywood Floor, Does not Sell w/ Any Electrical. Exterior Clad w/ Steel Siding
|
|
|
Electrical Control Cabinet w/ 600 Amp Breaker Disconnect, Benshaw 300 Amp Motor Control, 400 Amp Bre Lot #100G (Sale Order 109 of 202) Electrical Control Cabinet w/ 600 Amp Breaker Disconnect, Benshaw 300 Amp Motor Control, 400 Amp Breaker, Yaskawa A-1000 Motor Control, Relays & Small HP Motor Contactors. This Control Panel Runs Hammermill, Bagger Feeder & Belt Conveyors
|
|
|
Electrical Control Cabinet w/ 600 Amp Breaker Disconnect, Yaskawa A-1000 Motor Control (Used for 200 Lot #100H (Sale Order 110 of 202) Electrical Control Cabinet w/ 600 Amp Breaker Disconnect, Yaskawa A-1000 Motor Control (Used for 200hp Blower, Lot #51)
|
|
|
Cross Over Steps, 6 Steps High Lot #100I (Sale Order 111 of 202) Cross Over Steps, 6 Steps High
|
|
|
Rollaway Steps, 6 Steps High Lot #101 (Sale Order 112 of 202) Rollaway Steps, 6 Steps High
|
|
|
Rollaway Steps, 9 Steps High Lot #102 (Sale Order 113 of 202) Rollaway Steps, 9 Steps High
|
|
|
28in x 24in Hot Water Heat Exchangers Lot #103 (Sale Order 114 of 202) 28in x 24in Hot Water Heat Exchangers
|
|
|
28in x 24in Hot Water Heat Exchangers Lot #104 (Sale Order 115 of 202) 28in x 24in Hot Water Heat Exchangers
|
|
|
28in x 24in Hot Water Heat Exchangers Lot #105 (Sale Order 116 of 202) 28in x 24in Hot Water Heat Exchangers
|
|
|
42in x 48ft x 16ft 10in Steel, Pallet Shelving Unit, (4) 12ft Sections w/ 2 Shelves Per Section Lot #106 (Sale Order 117 of 202) 42in x 48ft x 16ft 10in Steel, Pallet Shelving Unit, (4) 12ft Sections w/ 2 Shelves Per Section
|
|
|
42in x 8ft x 16ft 10in Steel, Pallet Rack, 2 Shelves Lot #107 (Sale Order 118 of 202) 42in x 8ft x 16ft 10in Steel, Pallet Rack, 2 Shelves
|
|
|
42in x 16ft High Steel Pallet, Shelving has 6 Pcs 8ft Cross Sections (1) Pc of 12ft Section, Some St Lot #108 (Sale Order 119 of 202) 42in x 16ft High Steel Pallet, Shelving has 6 Pcs 8ft Cross Sections (1) Pc of 12ft Section, Some Standards Have Been Cut to Difficult Sizes
|
|
|
5hp Vertical Chop Saw, 1 3/4 Thick or Wide Material Lot #109 (Sale Order 120 of 202) 5hp Vertical Chop Saw, 1 3/4 Thick or Wide Material
|
|
|
5hp Vertical Chop Saw, 1 3/4 Thick or Wide Material Lot #110 (Sale Order 121 of 202) 5hp Vertical Chop Saw, 1 3/4 Thick or Wide Material
|
|
|
5hp Vertical Feed Chop Saw, 1 3/4 Thick or Wide Material Lot #110A (Sale Order 122 of 202) 5hp Vertical Feed Chop Saw, 1 3/4 Thick or Wide Material
|
|
|
Pop Up RH Chop Saw, No Motor Lot #111 (Sale Order 123 of 202) Pop Up RH Chop Saw, No Motor
|
|
|
36in x 44ft Hourglass Rollcase w/ Elec Drv (1) 22ft Section is Missing Drive Chain Lot #112 (Sale Order 124 of 202) 36in x 44ft Hourglass Rollcase w/ Elec Drv (1) 22ft Section is Missing Drive Chain
|
|
|
9ft x 56in High 3 Strand Unscrambler, No Drv Lot #113 (Sale Order 125 of 202) 9ft x 56in High 3 Strand Unscrambler, No Drv
|
|
|
Grecon Fire Suppression Unit, Berkley Pump w/ 7.5hp Motor Lot #114 (Sale Order 126 of 202) Grecon Fire Suppression Unit, Berkley Pump w/ 7.5hp Motor
|
|
|
Vertical Air Receiver Tank, Encased in Concrete Slab Lot #114A (Sale Order 127 of 202) Vertical Air Receiver Tank, Encased in Concrete Slab
|
|
|
6in x 32ft Conveyor Panning Lot #115 (Sale Order 128 of 202) 6in x 32ft Conveyor Panning
|
|
|
20ft Edger Tailing Belt Frame, No Belt Lot #115A (Sale Order 129 of 202) 20ft Edger Tailing Belt Frame, No Belt
|
|
|
18ft Wide x 8 Strand Unscrambler w/ Drive End for a 14ft x 5 Strand Deck, Drives, No Chain on Unscra Lot #116 (Sale Order 130 of 202) 18ft Wide x 8 Strand Unscrambler w/ Drive End for a 14ft x 5 Strand Deck, Drives, No Chain on Unscrambler
|
|
|
(6) 20ft Tracks for V-Groove Wheels Lot #117 (Sale Order 131 of 202) (6) 20ft Tracks for V-Groove Wheels
|
|
|
60in Inserted Tooth Cut Off Saw Mounted on Traveling Carriage, No Motor Lot #118 (Sale Order 132 of 202) 60in Inserted Tooth Cut Off Saw Mounted on Traveling Carriage, No Motor
|
|
|
30in x 15ft Hourglass Rollcase w/ 3 Mechanical Stops, No Drive Lot #119 (Sale Order 133 of 202) 30in x 15ft Hourglass Rollcase w/ 3 Mechanical Stops, No Drive
|
|
|
30ft Log Conveyor Panning for 11in Ladderback Chain, No Chain, No Drv, No Idle End Lot #120 (Sale Order 134 of 202) 30ft Log Conveyor Panning for 11in Ladderback Chain, No Chain, No Drv, No Idle End
|
|
|
11in Ladderback Chain, Used Lot #120A (Sale Order 135 of 202) 11in Ladderback Chain, Used
|
|
|
11in x 30ft Ladderback Chain Conveyor w/ S-Drive, No Motor Lot #121 (Sale Order 136 of 202) 11in x 30ft Ladderback Chain Conveyor w/ S-Drive, No Motor
|
|
|
11in x 21ft Ladderback Chain Conveyor w/ Drive End, No Idle End, No Drv Lot #122 (Sale Order 137 of 202) 11in x 21ft Ladderback Chain Conveyor w/ Drive End, No Idle End, No Drv
|
|
|
12ft Gravity Wagon Box Retrofitted to a Live Bottom Bin w/ 12in x 9ft Auger, No Drv Lot #123 (Sale Order 138 of 202) 12ft Gravity Wagon Box Retrofitted to a Live Bottom Bin w/ 12in x 9ft Auger, No Drv
|
|
|
14in x 20ft Heavy Steel Conveyor Panning Lot #123A (Sale Order 139 of 202) 14in x 20ft Heavy Steel Conveyor Panning
|
|
|
30in x 4ft Table Top Belt Conveyor w/ Drive Lot #124 (Sale Order 140 of 202) 30in x 4ft Table Top Belt Conveyor w/ Drive
|
|
|
2000lb Scissor Lift w/ 35in x 7ft Rollcase, No Power Pack Lot #125 (Sale Order 141 of 202) 2000lb Scissor Lift w/ 35in x 7ft Rollcase, No Power Pack
|
|
|
5ft x 9ft Scissor Lift, No Hyd Power Pack Lot #126 (Sale Order 142 of 202) 5ft x 9ft Scissor Lift, No Hyd Power Pack
|
|
|
52in x 9ft Rollcase, No Drive Lot #127 (Sale Order 143 of 202) 52in x 9ft Rollcase, No Drive
|
|
|
11in x 20ft Ladderback Chain Log Conveyor Panning, No Chain, No Drive, No Idle End Lot #128 (Sale Order 144 of 202) 11in x 20ft Ladderback Chain Log Conveyor Panning, No Chain, No Drive, No Idle End
|
|
|
10in x 17ft Auger Conveyor, No Drive Lot #129 (Sale Order 145 of 202) 10in x 17ft Auger Conveyor, No Drive
|
|
|
35in x 12ft Belt Conveyor, Panning Only Lot #130 (Sale Order 146 of 202) 35in x 12ft Belt Conveyor, Panning Only
|
|
|
(2) 24in x 10ft x 10in Deep Vibratory Conveyor Sections Lot #131 (Sale Order 147 of 202) (2) 24in x 10ft x 10in Deep Vibratory Conveyor Sections
|
|
|
18in x 5ft x 10in Deep Fiberglass Vibratory Conveyor Section w/ (1) 30in Steel Section & (1) 42in St Lot #131A (Sale Order 148 of 202) 18in x 5ft x 10in Deep Fiberglass Vibratory Conveyor Section w/ (1) 30in Steel Section & (1) 42in Steel Section
|
|
|
16in x 52ft Belt Conveyor w/ 12in Deep Sides, No Motor on Drive Lot #132 (Sale Order 149 of 202) 16in x 52ft Belt Conveyor w/ 12in Deep Sides, No Motor on Drive
|
|
|
22in x 30ft Concave Belt Conveyor, No Drive Lot #133 (Sale Order 150 of 202) 22in x 30ft Concave Belt Conveyor, No Drive
|
|
|
Progress 8 x 12 Shaker Screen, Fire Damage Lot #134 (Sale Order 151 of 202) Progress 8 x 12 Shaker Screen, Fire Damage
|
|
|
Hemco 18ft Drop Saw Trimmer w/ 9 Saw Ladders, Missing 3 Hyd Cylinders, No Drv on Feed Through Chains Lot #135 (Sale Order 152 of 202) Hemco 18ft Drop Saw Trimmer w/ 9 Saw Ladders, Missing 3 Hyd Cylinders, No Drv on Feed Through Chains
|
|
|
Mill Power 24in x 28ft x 14in Deep Vibratory Conveyor w/ Incomplete Drive, Has Been Modified w/ Chip Lot #136 (Sale Order 153 of 202) Mill Power 24in x 28ft x 14in Deep Vibratory Conveyor w/ Incomplete Drive, Has Been Modified w/ Chip Screen Welded on Top of Conveyor
|
|
|
(4) Bullwheels for Cambio Debarker Lot #137 (Sale Order 154 of 202) (4) Bullwheels for Cambio Debarker
|
|
|
Newman #500 4 Hd Planer/ Moulder w/ 75hp Motor, S/N 7650 Lot #138 (Sale Order 155 of 202) Newman #500 4 Hd Planer/ Moulder w/ 75hp Motor, S/N 7650
|
|
|
Newman M-55 Feeder Lot #139 (Sale Order 156 of 202) Newman M-55 Feeder
|
|
|
2 Cutter Head Attachment for Newman #500 Planer/ Moulder, Top & Bottom Lot #140 (Sale Order 157 of 202) 2 Cutter Head Attachment for Newman #500 Planer/ Moulder, Top & Bottom
|
|
|
Tie Back Lots #138, 139 & 140 w/ 10% Raise Lot #140T (Sale Order 158 of 202) Tie Back Lots #138, 139 & 140 w/ 10% Raise
|
|
|
Wooden Crate w/ 22 Side Cutter Heads for Newman #500 Planer/ Moulder, (3) Cutter Heads are 6in Lot #141 (Sale Order 159 of 202) Wooden Crate w/ 22 Side Cutter Heads for Newman #500 Planer/ Moulder, (3) Cutter Heads are 6in
|
|
|
5ft x 5ft Steel Bunk Lot #142 (Sale Order 160 of 202) 5ft x 5ft Steel Bunk
|
|
|
5ft x 5ft Steel Bunk Lot #143 (Sale Order 161 of 202) 5ft x 5ft Steel Bunk
|
|
|
5ft x 5ft Steel Bunk Lot #144 (Sale Order 162 of 202) 5ft x 5ft Steel Bunk
|
|
|
5ft x 5ft Steel Bunk Lot #145 (Sale Order 163 of 202) 5ft x 5ft Steel Bunk
|
|
|
DeWalt Radial Arm Saw Lot #146 (Sale Order 164 of 202) DeWalt Radial Arm Saw
|
|
|
7ft x 20ft 2 Strand Green Chain w/ C55B Rooftop Chain, No Drv Lot #147 (Sale Order 165 of 202) 7ft x 20ft 2 Strand Green Chain w/ C55B Rooftop Chain, No Drv
|
|
|
7ft x 16ft Even Ender Rollcase, No Drv Lot #148 (Sale Order 166 of 202) 7ft x 16ft Even Ender Rollcase, No Drv
|
|
|
19in Wide Track Conveyor Chain - Used Lot #149 (Sale Order 167 of 202) 19in Wide Track Conveyor Chain - Used
|
|
|
Michigan Knife 72in Knife Grinder 480-240 Volt 3 Phase S/N 726 Lot #150 (Sale Order 168 of 202) Michigan Knife 72in Knife Grinder 480-240 Volt 3 Phase S/N 726
|
|
|
Michigan Knife 60in Knife Grinder 480-240 Volt 3 Phase, Grind Head is Missing S/N 534 Lot #151 (Sale Order 169 of 202) Michigan Knife 60in Knife Grinder 480-240 Volt 3 Phase, Grind Head is Missing S/N 534
|
|
|
Vibratory Conveyor Drv Lot #152 (Sale Order 170 of 202) Vibratory Conveyor Drv
|
|
|
New Bearing for Progress Chip Screen Lot #152A (Sale Order 171 of 202) New Bearing for Progress Chip Screen
|
|
|
Corley Drop Saw Trimmer w/ 11 Saw Ladders, Minus 1 Saw, Waste Belt Conveyor, Controls, Not Installed Lot #153 (Sale Order 172 of 202) Corley Drop Saw Trimmer w/ 11 Saw Ladders, Minus 1 Saw, Waste Belt Conveyor, Controls, Not Installed, Under Tarp
|
|
|
Cutler Hammer 400 Amp Motor Contor Center Incomplete, See Pictures Lot #154 (Sale Order 173 of 202) Cutler Hammer 400 Amp Motor Contor Center Incomplete, See Pictures
|
|
|
Westinghouse Motor Control Center w/ Single Phase Breaker Bucket, Unit is Incomplete Lot #155 (Sale Order 174 of 202) Westinghouse Motor Control Center w/ Single Phase Breaker Bucket, Unit is Incomplete
|
|
|
Hyd Power Pack w/ Sering Hyd Pump, No Motor Lot #156 (Sale Order 175 of 202) Hyd Power Pack w/ Sering Hyd Pump, No Motor
|
|
|
Heatmor Outdoor Hot Water Furnace Lot #157 (Sale Order 176 of 202) Heatmor Outdoor Hot Water Furnace
|
|
|
Toyota 6000lb Forklift Mdl #7FGU15, Solid Tires, New Engine, 42in Forks, Side Shift, S/N 60154 Lot #200 (Sale Order 177 of 202) Toyota 6000lb Forklift Mdl #7FGU15, Solid Tires, New Engine, 42in Forks, Side Shift, S/N 60154
|
|
|
1994 JLG Mdl #2033 Scissorlift 20ft Max Height, 750lbs Max Work Weight S/N G0085580200012582 Lot #202 (Sale Order 178 of 202) 1994 JLG Mdl #2033 Scissorlift 20ft Max Height, 750lbs Max Work Weight S/N G0085580200012582
|
|
|
JLG G12-55A Material Handler, 8,226 Hrs, S/N 0160038714 Lot #203 (Sale Order 179 of 202) JLG G12-55A Material Handler, 8,226 Hrs, S/N 0160038714
|
|
|
Custom Built Portable Gravity Fed Bagging System Mounted on Tandem Axle Bumper Pull Trailer, Bagging Lot #204 (Sale Order 180 of 202) Custom Built Portable Gravity Fed Bagging System Mounted on Tandem Axle Bumper Pull Trailer, Bagging System is Powered by a 100 Amp Generator w/ 4 Cylinder Diesel Engine, System Can Bag (3) 2 Cu Ft Bags Per Minute, 757 Hrs on Genset, Was Used for Mulch, On Board Rice Bag Scale
|
|
|
CAT 966G Wheel Loader w/ Pin on Log Grapple, Hrs are Unknown Lot #205 (Sale Order 181 of 202) CAT 966G Wheel Loader w/ Pin on Log Grapple, Hrs are Unknown
|
|
|
CAT 938G Wheel Loader w/ Pin on 3 Yd Bucket, Open ROPS, 13,222 Hrs, S/N CAT0938GKRTB00798 Lot #206 (Sale Order 182 of 202) CAT 938G Wheel Loader w/ Pin on 3 Yd Bucket, Open ROPS, 13,222 Hrs, S/N CAT0938GKRTB00798
|
|
|
2003 CAT M320 Wheeled Log Loader, Cab w/ AC, 4x4, 2 Pc Boom, Rotating Log Grapple, Outriggers, Front Lot #207 (Sale Order 183 of 202) 2003 CAT M320 Wheeled Log Loader, Cab w/ AC, 4x4, 2 Pc Boom, Rotating Log Grapple, Outriggers, Front 5th Wheel Hitch w/ Air Brakes, 11.00x20 Tires, 5,653 Hrs, S/N CAT0M32016WL00972
|
|
|
2019 John Deere 437E Trailer Mounted Knucklboom Loader w/ Hyd Hook-Ups, Kodiak Series 3 Trailer Lot #207A (Sale Order 184 of 202) 2019 John Deere 437E Trailer Mounted Knucklboom Loader w/ Hyd Hook-Ups, Kodiak Series 3 Trailer, 4,500 Hrs on Loader S/N 1T0434EDCMF396344
|
|
|
FMC Link Belt LS-3400 Tracked Excavator w/ a "Young" 3 Section Boom w/ Log Grapple, Shows 3,021 Hrs Lot #207B (Sale Order 185 of 202) FMC Link Belt LS-3400 Tracked Excavator w/ a "Young" 3 Section Boom w/ Log Grapple, Shows 3,021 Hrs S/N 3400A-0629
|
|
|
2010 Kenworth T800 Tri-Axle 4 Bunk Log Truck w/ Rebuilt CAT C-15 Engine, 18 Spd Heavy Spec Trans, 20 Lot #208 (Sale Order 186 of 202) 2010 Kenworth T800 Tri-Axle 4 Bunk Log Truck w/ Rebuilt CAT C-15 Engine, 18 Spd Heavy Spec Trans, 20k Front Axles, Heavy Rears, Air Ride, Rear Mounted Robotec Knuckleboom Loader, Steerable Tax Axle, 691,835 Miles, VIN #1NKDLB0X4AJ277097
|
|
|
Rosa Wagon, 4 Bunk Pup Trailer Lot #209 (Sale Order 187 of 202) Rosa Wagon, 4 Bunk Pup Trailer
|
|
|
CAT 525D Double Arch Grapple Skidder w/Cable Winch, 9,325 Hrs, S/N CAT0525DAGKP00419Single Arch Grap Lot #211 (Sale Order 188 of 202) CAT 525D Double Arch Grapple Skidder w/Cable Winch, 9,325 Hrs, S/N CAT0525DAGKP00419Single Arch Grapple Skidder w/ Winch, No Cable S/N CAT0525CV52501874
|
|
|
CAT 525C Double Arch Grapple Skidder w/ Cable Winch Approx 13,000 Hrs Lot #212 (Sale Order 189 of 202) CAT 525C Double Arch Grapple Skidder w/ Cable Winch Approx 13,000 Hrs
|
|
|
2007 Great Dane 52ft Van Trailer, Tandem Axle VIN #1GRAP06268T544267 Lot #213 (Sale Order 190 of 202) 2007 Great Dane 52ft Van Trailer, Tandem Axle VIN #1GRAP06268T544267
|
|
|
2001 EBY 45ft Open Top Walking Floor Trailer, Tandem Axle VIN #482M5452821008570 Lot #213A (Sale Order 191 of 202) 2001 EBY 45ft Open Top Walking Floor Trailer, Tandem Axle VIN #482M5452821008570
|
|
|
2011 Viking 40ft 4 Bunk Log Trailer VIN #1V9P04223BN062071 Lot #214 (Sale Order 192 of 202) 2011 Viking 40ft 4 Bunk Log Trailer VIN #1V9P04223BN062071
|
|
|
2007 Pitts 40ft 4 Bunk Log Trailer VIN #5JY1LT40247P071248 Lot #215 (Sale Order 193 of 202) 2007 Pitts 40ft 4 Bunk Log Trailer VIN #5JY1LT40247P071248
|
|
|
2003 Pitts Tandem Axle Detachable Equipment Trailer VIN #5JXLB35222P030123 Lot #216 (Sale Order 194 of 202) 2003 Pitts Tandem Axle Detachable Equipment Trailer VIN #5JXLB35222P030123
|
|
|
2009 Volvo Tandem Axle Tractor, Mdl #D11, Day Cab, Eaton Auto Transmission, DHF365 Engine, 12,000lbs Lot #217 (Sale Order 195 of 202) 2009 Volvo Tandem Axle Tractor, Mdl #D11, Day Cab, Eaton Auto Transmission, DHF365 Engine, 12,000lbs Front Axle, 40,000lbs Rear Axle, 649,276 Miles VIN #4V4MC9DF39N274678
|
|
|
2002 Kenworth Mdl T-802 Tandem Axle Truck w/ Service Truck Body, C-10 CAT Engine, 18 Spd Eaton Fulle Lot #218 (Sale Order 196 of 202) 2002 Kenworth Mdl T-802 Tandem Axle Truck w/ Service Truck Body, C-10 CAT Engine, 18 Spd Eaton Fuller Trans, Service Body has Multiple Fuel & Oil Tanks w/ Dispensers, On Board Air Compressor Run by Hyd Power, 88,120 Miles, 9,542 Hrs, VIN #1NKDLT0X92J899119
|
|
|
2004 Freightliner FL70 4 Wheel Drive Single Axle Service Truck w/ CAT C-7 Engine, Auto Trans, Servic Lot #219 (Sale Order 197 of 202) 2004 Freightliner FL70 4 Wheel Drive Single Axle Service Truck w/ CAT C-7 Engine, Auto Trans, Service Body has Fuel Tank & Dispensary Pump, Air Compressor w/ Kohler Gas Engine 48,934 Miles, VIN #1FVDBSDC74HM88337, All New Tires
|
|
|
(4) 28L John Deere Skidder Rims (2 w/tires) Lot #220 (Sale Order 198 of 202) (4) 28L John Deere Skidder Rims (2 w/tires)
|
|
|
John Deere Cable Winch Mdl #SNE3305 for a 440 John Deere Lot #221 (Sale Order 199 of 202) John Deere Cable Winch Mdl #SNE3305 for a 440 John Deere
|
|
|
TSG100 Log Grapple Lot #222 (Sale Order 200 of 202) TSG100 log Grapple
|
|
|
(2) Steel Log Bunks, 101in OD Lot #223 (Sale Order 201 of 202) (2) Steel Log Bunks, 101in OD
|
|
|
(4) 16.5" Rims w/Tires for Skid Steer Lot #224 (Sale Order 202 of 202) (4) 16.5" Rims w/Tires for Skid Steer
|
|
