TERMS OF SALE

Each person or entity whose agent is bidding at auction is hereinafter referred to as a Bidder. Unless a Bidder registers by providing the information below and agrees to these Terms of Sale, such Bidder will not be provided a bidder?s number nor allowed to bid or participate in the auction. The information is as to the individual bidding and if applicable the information on whose behalf the Bidder is participating (who is hereinafter referred to as a Company).

Each Bidder whether live at auction or bidding through the internet through EquipmentDealz Live, Buy Now, or at Auction or through one of our many Bidding platforms including, but not limited to Proxibid, Equipment Facts, Bid Wrangler, Level Bid or others, by registering and obtaining a bidder?s number agrees to submit him/her/itself to venue and jurisdiction over the individual and/or (Company) to the courts of Dallas County, Texas Regardless of location of said Equipment, Lots, or products of EquipmentDealz, LLC. In the event of non-payment for a successful Bid/Buy Now Purchase, suit can be brought against such individual and/or entity in Dallas County, Texas and such individual and/or entity waives any rights to any other venue and/or jurisdiction.

The auction catalog online, print advertising, or televised is only a guide without any warranties expressed or implied. Auctioneers announcements supersede any printed material.
A successful Bidder must pay for his/her/its purchase not later than the end of the day of the auction. The end of the day means when the auction concludes for that day.

If you pay with another payment method the deposit funds will be returned to your credit card.
Buyer's premium is added to high bid price. Per item payment is expected day of auction or at receipt of invoice

Bidder/Buyer must pay Bidders/Buyer purchases in full in Cash, Wire Transfer, Cashier's Check or Check. Any personal check or a company check must be accompanied by the Bidders/Buyers or Company?s Bank Letter of Credit.

Each successful Bidder is to pay:
All Bidders will pay a eight percent (8%) Buyers Premium. The percentage is Calculated from the final bid/sale price.

Federal, State and Local Taxes will be added to the purchase price of all taxable items. There is no sales tax charged on buyer?s premium. Sales tax is only charged on the tangible items purchased at auction, but not real estate.

There is no sales tax charged on buyers premium, Unless the items to be purchased are located in the state of California and the buyer is taking possession of items purchased in the state of California.
For out of state buyers, there is no sales tax charged to customers purchasing and taking possession of items who are located outside the state of which the sale of the items was performed.

If you have a valid resale certificate, or Tax-Exempt certificate, these must be presented at the time of your purchase. You can submit them If your entity has a Tax-Exempt Certificate through our Tax Except Submission Form prior to the start of the Auction or Buy Now Purchase. Please submit the link below in your web browser https://www.equipmentdealz.com/payments

If an individual or company purchasing equipment provides the below forms, they will be exempt from sales tax. The nature of your purchase must be for resale purposes only.

11 Digit Tax Resales Number
01-339 Form
If you need Texas Ag Certificate 01-924 or Timber Certificate Form 01-925
Please Find the Forms on our website at the link below https://www.equipmentdealz.com/faq
A shipping sales tax will be applied to any machinery or tangible items that is shipped from Texas. This applies to out-of-state buyers. Notated by Texas Rule 3.303

C. If applicable, the Texas Emissions Reduction Plan (TERP) Off-Road,
Heavy-Duty Diesel Equipment Surcharge will also be added to the
purchase price.

 

Titled Units: A $40 Document Fee will be applied to all titled units. Title transfers take about 21 to 30 days turnaround time. No open titles will be given to the purchaser. Additionally, there will be a ten-dollar ($10.00) e-tag fee for requested temporary plates.

Titled purchases: bidder grants Equipmentdealz, LLC power of attorney to sign as owner/purchaser on title documentation as necessary to facilitate the transfer of ownership of titled purchases.

Bidder/Buyer accepts each item, Equipment, Vehicle that he/she/it or agent/employee for entity purchased at the auction or Buy Now is in its physical, AS IS, WHERE IS condition, with all faults. There are no warranties of any kind as to the items sold. Each Bidder/Buyer agrees to inspect each item prior to bidding to satisfy him/her/itself as to the condition of each item or Equipment/Vehicle/Product. The Bidder accepts that there are not any warranties, expressed or implied by law whether warranties of workmanship, suitability, merchantability and/or fitness for a particular purpose. Further, Bidder waives any warranties at law or in equity that could pertain under the Texas Uniform Commercial Code. Each item will be subject to the language contained on Exhibit A hereto attached.

The conditions of provisions of sale may be modified by the auctioneer at the time of the auctioning off a particular item and each Bidder is subject to those terms and conditions. All auctioneers live Announcements at time of sale, supersedes any printed or stated announcements.

The auctioneer reserves the right to group, modify, increase, diminish or delete auction lots at the auctioneers sole discretion or to sell items in bulk if such action serves the best interest of the Seller.

Auctioneer will receive bids from any responsible and registered Bidder/ Buyer who makes his/her/its submission of bid known so long as he or she conducts themselves in an orderly manner. Any and All bids are accepted from registered bidder, were onsite, online or remote.

Auctioneer may refuse to accept any bid which is but a trifling advanced over the prior bid or which contains conditions not acceptable to the Auctioneer or Seller or satisfies the terms and conditions of the sale. Auctioneer will settle any bidder dispute by reselling the lot.

The item will be considered sold without exception upon the final gavel by the auctioneer for that item and will become the sole responsibility of the buyer. Possession of purchased items will be granted upon payment in full.
 
Bidder is solely responsible for removing, insurance on, arranging, loading, and securing of load any items purchased. For provisions of the loading and shipping addendum, see Terms and conditions of loading and shipping. If you are the successful purchaser of said lot, Equipment or vehicle and need shipping quotes we offer quotes free to you at https://www.equipmentdealz.com/shipping

Upon the award of bid, title and risk of loss, damage to or destruction of the purchased item, passes to the purchaser and auctioneer will not have any liability for any damage to or destruction of any such item. Any items left overnight or for a length of time are not in the charge of the Seller or auctioneer, nor results in any bailment agreement.

For items not removed after the stated time per that auction event, they are subject to a storage fee of $100 per day per item. Any items not picked up after 30 days following the auction will be considered abandoned. At the discretion of the Auctioneer, items not removed will be resold and the debtor will be responsible for the difference and the storage fee at 18% per annum. Buy Now items are available for pick up immediately after the item is paid in full. Load-out tickets must be presented at time of pick up.
 

Bidders may not remove any purchased item/equipment, or vehicles until paid in full. No exceptions. The office will assist you with the receipt of payment and load out tickets for your removal and transportation on the items purchased at this Auction or Buy now. Load out hours are listed on each lot description per the location of each lot or Equipment, M-F and on select Saturdays. Loading will not occur after dark.


All items must be removed within the time announced at the sale, at items that are not removable purchaser's sole cost and risk. However, immediately (heavy objects or equipment) may be left on the premises at Bidders risk for a period not to exceed (7) days from the date of the end of the auction. If the items are not removed after the time fore stated, then a daily storage fee of $100 per item or any part there of will be charged to Bidder which must be paid PRIOR to the removal of said item. If the item is not removed on or before 180 days after the end of the auction [accumulating $100 a day storage fees amounting to Four Thousand Five Hundred Dollars ($4,500.00)], then Seller is at liberty to re-auction the item charging Bidder an auction fee of 10% measured against the final bid/sale price, plus any loss and associated costs, naming Seller as Bidders attorney in fact for the transfer of any right or title of the item. After deduction of all costs, expenses (including the accumulated storage fees to date of resale) and cost of commissions, the remainder will be mailed to Bidder at their last known address OR Seller may elect not to resale but to bring suit against Bidder and/or Company for the recovery of the sales price plus storage fees, attorneys fees and related expenses/costs. If judgment is obtained and Bidders property is still in possession of Seller, Seller may exercise the collection of its judgment against such item.

Bidders are prohibited from conducting or transacting any business on the auction premises or with sellers of lots or Equipment and vehicles other than through EquipmentDealz, LLC, without the express permission of auctioneer. Bidders who violate this provision and such violation results in damages to Seller or auctioneer will be liable to make them whole including the cost of court costs and attorneys fees (including all associated costs in conjunction with a lawsuit). These judgments are performed In Dallas County, Texas.

All rights, privileges and power reserved to auctioneer in these Terms of Sale shall be deemed reserved and granted to auctioneer's employees, advertising representatives, and all owners for whom the items are being sold.

We appreciate your attendance. Please present any questions or request at once to the auctioneer or his assistants. We hope that you will enjoy our methods and make advantageous purchases.
Auction company reserves the right to remove items from auction or skip items once the auction has begun. In the event an item is removed from auction or skipped any Prebid's/absentee bids will be void. All announcements made by auctioneer shall supersede any printed material.

 

Live / Simulcast/ Timed online auction additional terms-Equipmentdealz, LLC, its employees act merely as agents of sellers. All auctions are with reserve unless specifically stated otherwise. reserves, if any, are not disclosed. Additionally, bids may be placed at some auctions by the seller, an employee of the seller, or an agent on the sellers behalf up to the reserve. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless EquipmentDealz, LLC and its employees or any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features, and other data pertinent to the value of the item. All items are sold AS IS WHERE IS.

EquipmentDealz Live, Proxibid, Equipment Facts, Bid Wrangler and others are all Online auction platforms utilized to allow bidders from around the world to purchase. At no fault of EquipmentDealz or the Auction platforms listed have any responsibility of a missed or non placed bid on either an online live Simulcast Auction, Online Pre-bidding, live onsite, remote auction or any other auction type, based on the Internet connection, gliche in the Software, or issue with the Auction companies Equipment. You as the bidder/buyer agree to hold EquipmentDealz, LLC and other Auction Platforms used harmless from the inability of the bidder to properly place bids in a timely manner, or to the fault of the internet connection between seller and buyer.

EquipmentDealz reserves the right to revoke bidder number and bidding privileges from registered bidder and have that individual and their parties leave the auction site. Bidder will be responsible for payment of any bids placed prior to revocation. photography, video & audio recording is used on premises and will be used for security and/or promotional purposes.

Injury and Damage: bidder acknowledges responsibility for any personal injury or property damage caused by bidder, bidder's guests, or agents. Bidder agrees to hold EquipmentDealz, LLC harmless from any personal injury to himself or his agents and any property damage incurred on auction premises or Sellers locations. Bidder releases EquipmentDealz, LLC and the seller from any and all liability connected with the removal and transportation of purchases and any and all future uses for the goods purchased here with. Bidder also agrees that by registering for an auction I understand and agree that I will receive advertisements by email, regular mail and phone call or text message. I understand that text and phone charges may be charged by my service provider.

 

Exhibit A

The Seller of the item, by and through the auctioneer, is hereafter referred to as Seller and the successful purchaser is hereinafter referred to as Bidder. Bidder accepts the item purchased (hereinafter referred to as Property) by being the successful bidder at auction subject to the following:

A. Bidder is accepting the property as is, where is and with all faults, including latent defects, including non-working, out of repair, broken and/or defective parts.

B. Seller does not and has not made and specifically disclaims any warranties or representations of any kind or character, expressed or implied, with respect to the property, (except those set out in the warranty of title, if any) including, but not limited to: tax consequences; physical or environmental conditions; operating history; valuation; governmental approvals, governmental law and/or regulations; things relating to or affecting the property, including, without limitation:

1) The value, condition, merchantability, marketability, profitability,

suitability or fitness for a particular use or purpose of the property.

2) The manner or quality of the construction or materials

incorporated into any of the property.

3) The manner, quality, and/or state of repair or lack of repair of the property; and

4) The performance of the work on the property

C. Bidder accepts the property solely based upon bidders inspection, testing and/or sole judgment after bidder inspected the property for whatever purpose deemed necessary or appropriate by bidder and bidder has satisfied him/her/itself in reference to same.

D. Bidder has not relied upon, either directly or indirectly, on any representation or warranty of seller or any agent of seller.

E. Bidder represents that:

1) Bidder is a knowledgeable purchaser of auction items, or if not, then bidder has hired knowledgeable person(s) to assist buyer in the examination, inspection and purchase of the property.

2) Bidder is relying solely on bidders own expertise and inspections in purchasing the property; or the expertise and inspections of the experts hired by buyer upon which buyer is solely relying as to the condition of the property.

3) Bidder has conducted such inspections and investigations of the property as bidder deems necessary, including, but not limited to,

the physical and environmental conditions thereof and relies solely on same.

F. There are not any oral agreements, warranties and/or representations,

collateral to or affecting the property by seller, any agent of seller or any third party.

G. The terms and conditions of this exhibit will expressly survive the closing, not merge with the purchase.

H. Bidder further acknowledges and agrees that the provisions of this paragraph were a material factor in the determination of the purchase price of the property.

I. As part of the consideration in the purchase of the property, bidder waives any causes of action, claims, and/or damages buyer could claim against seller in the future and waiving the discovery rule.

J. Additional disclosures provided by the auctioneer also apply to the purchase of the property.

k. Bidder accepts that the purchase is final, not subject to any returns.

 

 

All sales are final at the fall of gavel. Payment Is due immediately at the fall of the gavel.

Checkout Dates are from Friday March 22, 2024 From 8:00AM to 6:30 PM Central Standard Time, and Ends Wednesday March 27, 2024 at 6:30 PM CST.

No items are to be removed from remote locations or auction yard, until payment is made in full. Loadout sheet must be present at the time of pickup.

Pickup must be arranged with seller through EquipmentDealz once payment has been made in full, and buyer is furnished with loadout ticket

All items must be picked up and removed no later then (7) days after the auction- Unless other arrangements are made with Auctioneer.

For items not removed after the stated time per that auction event, they are subject to a storage fee of $100 per day per item. Any items not picked up after 30 days following the auction will be considered abandoned.

 

Buyer is responsible for all costs related to shipping and handling of their purchases. Full shipping address will be released only to the purchaser, after payment is made in full. Please call to arrange shipping quotes to determine the shipping cost prior to bidding. Buyer is responsible for full and total cost associated with Shipping and Handling of their lots/items purchased.

Bidder is solely responsible for removing, insuring, arranging, loading, and securing of load for any items that are purchased.

If you are the successful purchaser of said lot, Equipment or vehicle and you are in need shipping quotes we offer quotes free to you at https://www.equipmentdealz.com/shipping
 

1. Upon request we will palletize and secure your purchases on a pallet. Palletizing and securing a load cost is a minimum cost of $250. We are not responsible for any loss related to that process.
2. Upon request, Auctioneer can arrange common carrier freight. If common carrier freight is required, it will be billed at cost plus 30%.
3. Buyer is responsible for paying all fees before picking up items.

All items must be picked up and removed no later than (7) days after the auction- Unless other arrangements are made with Auctioneer.

For items not removed after the stated time per that auction event, they are subject to a storage fee of $100 per day per item. Any items not picked up after 30 days following the auction will be considered abandoned.
 

Please contact the auction company for preview dates & times. All in person preview/ inspection per each lot/time you as the bidder intend to inspect and purchase, must be arranged with EquipmentDealz prior. All inspections made via buyer / mechanic must be done prior to auction. Inspections following the Auction does not change the outcome of the bidder/buyer being responsible for full payment. All items sold as is, where is, all sales are final.

Preview is by appointment only please contact EquipmentDealz at
972-666-9501 or 1855-373-3259
 

400 pound cast iron Greatbear single horned anvil with industrial paint.

400 pound cast iron Greatbear single horned anvil with industrial paint.

Hotsy's reliable, 1700 series electric-powered (120 volt), cold water pressure washer featuring a Hotsy belt-drive, triplex pump, insulated variable pressure wand and ETL safety certification. 2 HP motor delivers cleaning power of 1000 PSI at 2.8 GPM. Equipped with a 50' hose, Cox hose reels, stainless steel couplers, new tips and a stainless steel cart. The stainless steel cart holds up to 2 different types of chemical which can be changed with a built in brass diverter valve for downstream chemical injection. OEM pumps are less than a year old. Motors are Baldor industrial.

Maximum Pressure: 1,000 PSI
Corded Electric

Located in Henderson, TX

Fits tractor category 1 or 2 hitch.

Located in Dry Prong, LA

FITS CAT: 936, 936F, 938G
6" wide forks and outside width 51" with 39" between forks in open area
Approx 60 inches from fork tip to back of "C" shaped body of the attachment


Located in Dry Prong, LA

From back of C-shaped throat to tip of fork approx 39 inches
Serial 44770
Model PF92208C (originally on 922 Caterpillar as seller states)
1 1/2" pins on centers vertically about 17 3/8" and horizontally about 36"
Could fabricate other attachment points for a different loader
Cylinder chrome looks good

New set costs around $15,000
Cylinders are in good condition, no leaking
Fits 950 or bigger wheel loader

Located in Springtown, TX

Fork Attachment from 20,000 lb Hyster Forklift with 5 ft Forks
Back is "blank" and ready to be fitted with mounts by qualified builder/engineer
70" wide frame width
Forks are 2 1/2" thick by 8 wide and 58 1/2" long
They can be moved as close together as 8" between them
Each fork has five positions where it can be pinned in place
Forks are "pin type" with  2 1/2" diameter pins


Located in Dry Prong, LA

Comes with Pulleys & Chains

Located in Aurora, TX

In person inspection and preview by appointment only. Please call

Year: 2001
Make: Harley-Davidson
Model: XL 1200C
Vehicle Type: Motorcycle
Mileage:29,732
Body Type: Heavy Weight
Trim Level: XL
Drive Line: Belt Drive
Engine Type: V2, 1200 cc; 4 cycle
Fuel Type: Gasoline
Horsepower: 68HP
Transmission: Manual 5 Speed
VIN #: 1HD1CGP141K136588

Features and Notes:

Details: Added Hyper Charger, Added Ground pounder Chrome pipes, Added Crocodile Spring Bar hopper Seat, All New blacked out Led headlight, and Led Taillight, Added all new Smoked out Turn signals, Aftermarket heavier rear shocks installed, Carb Rebuilt Fully with new lines, Pet cock, Vacuum Fuel Tank Petcock deleted. New soft grips recently installed. Added rear brake. pedal extension, Fully Chromed out throughout the whole bike. New tires with good tread. New Battery in December of 2021 

Lots of work and money invested in the bike, Great investment as the value is climbing on these models, as they are collectible and in collections. 

Bike is great for around town and from going to different joints, Rides out very well, Joy to ride. Hop on and go, needs nothing but a new rider. Not being ridden enough reason for selling. 

One small dent on driver side of the fuel tank.

All original seat. Passenger back rest and seat, original pipes. Windscreen Front Fender, All still available and sold with the bike.

Title ready to go, currently still current on inspection and registration

Preview by appointment only please call for arrangements

Click here for Additional Video

Bike physically located in Gilbert, AZ.

No load out equipment on site. Drop deck, truck or flatbed or pickup for load out recommended. 

Shipping and local delivery assistance available from item location available.

 

1994 Isuzu Elf Truck
This truck is Street Legal in the state of TEXAS.

THIS TRUCK WAS LEGALLY IMPORTED FROM JAPAN
AMERICAN VIN: 0000NHS69E7401337
Dually
4x4 w/ manual-locking hubs
X2 spare tires mounted to truck
3.05 liter Isuzu diesel
Exhaust Brake
Low mileage (45,000 miles)
Glow plugs
5-speed manual (low gears)
Title in hand
AC and heat work perfect
Tow hitch
Right-side steering
Road legal
Bed is 5? x 10? and has drop=dropdown sides
Comes w/ the following spare maintenance parts:
- Oil filter
- Air filters (x3)
- Fuel filter w/ water separator
- Liqui Moly oil
- Liqui Moly fuel additive
Seats 3
Spare tire changing tools w/ jack
X4 keys
Lockable fuel cap
3300 lb bed capa

Year: 2015
Make: Winnebago
Model:Ultralite M-30RESS 
Type: Travel Camper Trailer 
VIN: 54CA11127F1E11571
10,000 lb GVWR 

Awning, 3 slide outs, water heater, microwave, electric level jacks, good tread on tires, electric jack works, A/C & Heat works, body is in good shape with no damage. Electric Jack works, All the appliances work as normal

Attention: Kitchen slide is stuck motor works moves about 4 inches in/out

Located in Grand Prarie Texas

Year: 2018
Make: Dutchman Denali 
Model: 325RL-RV
Type: Camper Travel Trailer
Slides: 3 

Features: Microwave, Fridge, A/C, Heat, Electric Leveling, Gas stove, TV electric jack for truck hook up, 2 5/16 ball

Coach is damages and peeling. 

Located in Grand Prarie, Texas
 

Year: Unknown
Make: Mitsubishi 
Model: FGC15N
Type: Forklift
Hours:11,252 HRS

Located in Carrollton, TX

Year: 
Make: Yale
Model: GLC030 VXNURE082
Hours: 15,790 HRS
Capacity: 3,000 Ib

Runs and works great
3 stage lift
5 degree back tilt
Solid tires

Located in Carrollton, TX

Year: Unknown
Make: Clark
Model: GCX25
Hours: 2,380 HRS
Capacity: 5,000 Ib

Starts up and runs well
Has a 4 stage lift, side shift and tilt
Solid tires

Located in Carrollton, TX

SELLER STATES: Will need the brakes worked on
Year: Unknown
Make: Lion Liftall
Model: HT 180
Capacity:  18,000 lb 
Type: Offroad Forklift

Serial #7558
Engine runs strong, no smoke
Has International UC 263 six cylinder engine (gas, but seller checked and propane kit available) with new electronic ignition
8 foot forks
Independent positioners to move forks from the cab
6 feet of free lift!!
20 feet lift height!
Twin cylinder steering
Seller states king pins look great
Enclosed cab
Tires changed to tubeless type
Triple mast

Located in Dry Prong, LA

Year: 2012
Make: CAT
Model: TL1255C 
Type: Telehandler
Hours: 18,000
Capacity: 12,000 LB

Click here for Inspection Video

Located in Carrollton, TX
 

Year: 2010
Make: CAT
Model: TL1055
Hours: 16,000
Capacity: 10,000 LB

Located in Carrollton, TX

Year: 2015
Make: JCB
Model: 509-42 
Type: Telescopic Telehandler
Hours: 3,491.0 HRS 
Cab: Open ROPS
Capacity: 9,000 lbs
Engine or Motor Type: Diesel
Max Lift Height: 42
Forward Reach: 42 feet
Qty Boom Segments: 3
109hp JCB diesel engine
4 speed powershift transmission
Frame leveling
Three Steering Modes
Auxiliary hydraulics
 14.00-24 semi-pneumatic tires

Options: 4x4, two wheel, crab and circle steer

• Fixed Carriage
• Rotate Carriage
• Sideshift Carriage

Features: Lights, Beacon, Fork Rotate & Tilt, All the cylinders are free from scuffs or leaks, lights all work. 

Does have a hose leak for the fork rotation and one of the injectors is leaking causing the engine to smoke black smoke at low RPMS. 

Click here for Inspections Video

Located in Springtown, TX

Year: 2012 
Make: CAT
Model: TL1255
Hours: 9,290 HRS
Engine or Motor Type: Perkins Diesel
Max Lift Height: 54 feet
Forward Reach: 42 feet
Qty Boom Segments: 4 
Directional Capacity: two wheel, crab and circle steer
Electronics: Lights, Safety Beacon, 
Options: 4x4,outriggers, two wheel, crab and circle steer

• Fixed Carriage
• Rotate Carriage
• Sideshift Carriage

Overall Dimensions: 8FT wide: 

Located in Carrollton, TX

Year: 2013 
Make: CAT
Model: TL1255C 
Hours: 4,625 HRS
Engine or Motor Type: 
Max Lift Height
Qty Boom Segments
Directional Capacity
Basket Capacity
Basket Swivel
Electronics:
Options: 4x4, hydraulics, etc
Overall Dimensions

Click here for Inspection Video

Located in Carrollton, TX

Year: 2021
Make: Case
Model: 588H
Type: Rough Terrain Forklift
Hours: 299
Cab: Open ROPS

Features: 3 stage lift, side shift, 21 ft lift, 6 ft forks, boom tilt, four speed transmission

Click here for Inspections Video

Located in Springtown, TX

Year: 2023
Make: JLG
Model: 660SJ
ONLY 9 HOURS! LOW HOUR MACHINE!
Engine: Duetz Diesel
Options: 120V & 220V, AIR outlet at ManBasket,Self leveling for steering, zero leaks, Good tires, starts right up when cold, zero blow-by, all controls and switches function as they should see video, No scratches. Retail ready unit.

SN 0300182343 is a reconditioned unit. The warranty is 3 years or 3000 hours, whichever comes first. If the unit never reaches 3000 hours the warranty expires March 2026. 2013 frame, but all parts under the rebuild are new.

Hours are actual, everything on unit is new except for the frame, frame is a 2013 frame reused by JLG to build this unit. 

Click here for an Additional Video

Located in Dallas, TX


 

Year: 2019
Make: Bobcat
Model: T595
Hours: 4,983 HRS 
Options: Enclosed ROPS, A/C, Heat, Hydraulic Quick Connect, Radio



Located in Dallas, TX

 

Year: 2019
Make: Bobcat
Model: T650
Hours:3,665.4 HRS
Tracked Skid Steer, Sprokets 40%, Rear idlers, 20-30%
Open Rops.
Options: AUX Hydraulics, Manual Bucket Connect, Comes with brand new smooth bucket.

Engine started and ran smooth, NO blowby, Oil is clean, no glitter or moisture. 

Located in Dallas, TX

Year: 2015
Make: CAT
Model: 259D
Type: Skid Steer
Cab: Open ROPS
Hours: 380 + or - hours. Computer show .7- ECM was changed by CAT- verified hours via paperwork.

Seller stated unit runs great, bucket level sensor needs to be calibrated. Maintenance has just been performed.

Located in Bastrop, TX

Year: 2019
Make: CAT
Model: 259
Hours: 2,011.4
Type: Tracked Skid Steer
Cab: Enclosed ROPS 

Machine has never been used for Mulching

Click here for Inspection Video

Located in Stephenville, TX 

Year: 2016
Make: CAT
Model: 299D2XHP Forestry Model
Hours: 3,558 

Lot is sold with CAT Skid Steer machine, CAT mulching head, and bucket!!

Filter has been changed every 250 on Hydraulic and Oil. Clean running machine, High Flow Two speed, external hydraulic cooler, reversing fan, all lights, A/C & Heat work as normal. Manual connect bucket, No codes, Forrestry door, Newer sprockets and tracks, CAT oil and filters whole life

Mulching head: SN: DJW00316. Around same hours on this head as skid steer, new carbide teeth installed, Pumps are dry and not leaking anywhere. 400 hours after rebuild done on head, New bearings, New teeth.

Located in Stephenville, TX

Year: Seller thinks unit is either a 2020 or 2021
Make: Bradco
Type: Disc Mulcher Mower w/ Carbide Teeth 
Carbide teeth on the bottom of the disk, all the hoses are in good shape and not leaking, pump is also dry no signs of leaking. 

High Flow 40 GPM+

Located in Springtown, TX

**STILL UNDER FACTORY WARRANTY**

Year: 2022
Make: Kubota
Model: SVL 75-2 Hi FLOW
Hours: 422
VIN: KBC7052CON1G69327
Cab Type: Enclosed ROPS

Click here for Inspection Video

Located in Springtown, TX

Year: 2022
Make: CASE
Model: TV450B
Type: High Flow Skid Steer
Hours: 45.4 Hours
Cab: Enclosed ROPS
Options: Forestry Poly Door & Frame, 

Click here for Inspections Video

Located in Forney, TX

Year: 2020
Make: ASV
Model: RT-120
VIN: TBD
Hours: 2100 HRS 
Cab Options: Enclosed ROPS
Engine Type: Cummins Diesel
Transmission Type; Hydrostatic
Tracked Unit
Electronics Options: Bluetooth radio, work lights, 
Options: Hi Flow 40 GPM, Enclosed ROPS, A/C, Heat, Wide Track, Forestry Unit. 

New A/C System, New Tracks, Not been deleted, Bought new in 2020 One owner its whole life.

Unit comes with a FECON Mulching head with knifes, but does not come with a bucket or any other attachments. 

Located in New Caney, TX

 

Year: 2019
Make: CAT
Model: 302.7D
Type: Mini Excavator
Hours: 2,487.8
Cab: Open ROPS

Click here for Inspections Video

Located in Arlington, TX
 

Year: 2020
Make: Bobcat
Model: E26
Type: Mini Excavator
Cab: Open ROPS
Hours: 548.2
Vin# B4S912239

Features: Aux Hydraulics, Straight blade, Plumbed and brackets for thumb, 3 cylinder kubota diesel, Tracks and undercarriage in good shape, Cylinders are free from scuffs and are not leaking, 2 spots on the machine have some body panels that are bent does not affect machine functionality. 

Click here for Inspection Video

Located in Springtown, TX

Year: 2016
Make: Kubota
Model: KX080
Hours: 2,430 HRS
Engine: Kubota 3 cylinder Diesel,
24" Bucket Included
Enclosed ROPS
A/C & Heat work great, ECO Mode, Auto idle, 4 way push blade, 2 speed Tracks, New alternator
Serviced recently, New alternator
Small slow leak on the push blade cylinder. Easy repack. 
Machine starts right up, runs smooth, zero blow by, no leaks noticed on engine. 85-95% Track life. 

Click here for an Additional Video
Located in Mansfield, TX

No loading dock onsite
In person inspection and preview by appointment only. Please call

Year: 2012
Make: Hitachi
Model: ZX135-3 
Hours: 13,000 + or --
Features: Hydraulic Quick Connect Coupler. Good Undercarraige 75% or better. Machine spends most of its life digging in one spot Doing City Pipeline work

Located in Irving, TX

Year: 2012
Make: Hitachi
Model: ZX135US-3
Hours: 13,008.3
Features: Hydraulic Quick Connect, Good undercarriage 75% or better. 
">Click here for Inspections Video

Located in Irving, TX

Year: 2007
Make: John Deere
Model: 135C
Type: Excavator
Hours: 5,041
Cab: Enclosed ROPS
Serial #: FF135CX301028

Key Features:

• US buyers can pick up in Williston, ND 58801 

• A/C Cab 

• Auxiliary Hydraulics 

• Hydraulic QC pin grabber 

• Blade 

• Stick/Bucket Pins Redone In 2019 

• No Major Work Orders 

Year: 2012
Make: Linkbelt
Model: 210X2
Type: Excavator
Hours: 6,355
Serial #: EHCK2-5522 

Located in Pennslyvania 

Hiatchi will honor the one year powertrain and hydraulic warranty from when its invoiced out. This warranty will be thru hitachi and not aftermarket. 

Year: 2022
Make: Hitachi
Model: ZX200-6 Hydraulic Crawler
VIN: HCMDC4A0A00512009
Hours: 26.8 HRS 
Cab Options: Enclosed ROPS
Engine Type: Hitachi Diesel
Transmission Type: Hydro Static
Stick Dimensions: Normal
Bucket Dimensions and Type: 1 Yard Pin On Bucket
Track Dimensions and Type: Steel Tracks
Coupler Type: None
Electronics Options: Back Up Camera, 360 Degree Camera's, AC/Heat, Radio, Automatic Greaser's. 

One owner, never been in dirt, never worked. Fresh as buying it direct from dealer!

Located in Irving, TX

In person inspection and preview by appointment only. Please call
 

Year: 1980
Make:  CAT
Model: D6D
Type: Crawler Dozer
Hours: 7,330 hours with 100 hours on the rebuild- no paperwork
Cab: Enclosed ROPS
Engine: 3306
Serial #: 4X5667

Features: Runs well, angle blade with hydraulic winch 

Click here for Inspections Video

Located in Springtown, TX

Year: 1998
Make: CAT
Model: D6R (Previous owner changed the stickers on the machine- serial number verified the machine is a D6R
Type: Crawler Dozer
Hours: 17,000 + or -, Seller states Transmission was replaced and engine was remaned. Paperwork on rebuild companents not located previous owner before this owner was not able to locate the paperwork.
Features: Swamp Pads, Good Undercarriage, Enclosed ROPS. A/C, Heat

Located in Ennis, TX

2008 CAT D10T DOZER, REBUILD

Year: 2008
Make: CAT
Model: D10T
Type: Crawler Dozer
Serial #: RJG01538

2023 Rebuild from Bare Frame. Work completed by former Cat employed Red Seal mechanics. 

One owner Machine on one job site before current owner, pushing reclaimed material, oil sands. Never worked in rocky material. 

- LPI Testing done on frame prior to current second rebuild.
- Only 2 rebuild done on the machine total this being second rebuild completed.

- Machine rebuilt by certified CAT Red Seal mechanics with previous rebuild experience done on D9, D10T, D11. CAT 627 & 657G scrappers etc.

- Drive train components as far as Engine was dyno tested at CAT Dealership, Transmission was Rebuilt & bench tested by CAT Dealership. 

Key Features: 

• U-blade dual tilt and single shank ripper  
• Blade: 200? wide, 84? high plus 14? rack 
• Aftermarket warranty available 
• Delivery cost North America wide for $29,500 USD 
• Seller will ship machine to Williston ND if purchased by US buyer. 

Located currently in Estevan, SK

Rebuild Details: 

• Engine: Cat C27, 650 HP Engine (Dyno tested at 645 HP). Full rebuild, new crank standard bearing sizing, Full bench test on Finning test bench, all pressures etc meet Cat specs. Oil samples taken and confirmed.  

• Transmission: Full rebuild. Full bench test on Finning test bench, all pressures etc meet Cat specs.  

• Torque Converter: Full rebuild.  

• Differential: Cat Dealer Complete Rebuild 

• Hydraulic pumps: Transmission pump full rebuild. Main pump reconditioned. Fan pump and motor fully inspected, within spec.  

• Main Frame:  stripped to bare frame, checked for cracks, all new pins and bushings.  

• Hardnose:  Crack checked, all new bushings and pins.  

• Radiator & Aftercoolers: Full inspection, pressure tested each mod, new seals, 1 aftercooler replaced new, other inspected and tested.  

• Final Drives, steering and brakes: inspected and reconditioned as needed.  

• Track Frames: crack checked, replaced major cartridge pins, and inspected minor pins, resealed track adjustment cylinders, new center pins/bushings on equalizer bar, resealed outer pins, new pivot shaft bearings and seals.  

• Undercarriage: replaced rear idlers, inspect front idlers within tolerance, new rollers, new rails and shoes, new sprocket segments,  

• Hydraulic cylinders: All cylinders on machine resealed and repacked. 

• Hydraulic Hoses: inspected and replaced as required.  

• Hydraulic coolers: All coolers inspected and flushed; engine oil cooler new.  

• Cab: fully refurbished, original gauge cluster, showing original hours, new headliner, new glass, seat in excellent condition.  

• Air Conditioner: new compressor and all new lines, evaporator, condenser, and heater core inspected and cleaned.  

• Wiring: all wiring harnesses inspected and replaced as needed. Main cab and engine harnesses new.  

• Blade and Ripper: replaced bushings, replaced any pins out of tolerance, trunnions in spec, blade face recently reskinned, GET 80% or better.  

• Finishing: full sandblast and repaint  

• Oils and Filters: all oils and filters are new throughout machine. 

• Testing: machine run in field, check for leaks, pressures tested and set.  

 

Conquest Dyno Report.pdf
Tru?IRON COVERED COMPONENTS..pdf
USD TruNorth Rate Card For Customers.pdf

Make: Mobile Track Solutions
Model: MT-35XL 
VIN: MT-35XL-00105
Hydraulic Operated: Yes
Hitch Type: Bolt On
Brakes: YES Rear Disk
Options: Bail and Hook, Push Block
Overall Dimensions

Features: Minimal pan use, New never used pan cutting edges installed, No Cracks to be found on the push block or the hitch area, all cylinders are free fro scuffs and are not leaking, Good Tire tread, 85-90% tread life left. 

Located In Springtown, TX

Year: 2012
Make: John Deere 
Model: 844K-II 
VIN: 1DW844KXCCD642654
Hours: 13,017.1 HRS 
Cab Options: Enlosed ROPS 
Engine Type: Diesel
Transmission Type: Hydrostatic 
Hitce Type: NON 
Bucket Dimensions: 
Bucket Type and Options: Toothed Bucket 
Options: Load Counter, 2 Truck Options, and Load Counter Per Truck, A/C & Heat, bothh work well, Enlosed ROPS, Work lights, No QC, Reversing Fan, JD Engine.
Opertaing condition, Machine starts well from cold start or hot start, has no visible Blow-By, Oil is clean with no signs or moisture or metal In oil, Operates as it should. Non on the cylinders has any leaking, The bottom lift cylinders has some seeping which is typical on a loader with 13,000 HRS, But no seeping on the rest. Front tires look to be newer good tread, rear tire on right is decent tread, and on left is 10% or less on tread, Trans worked well and shifted through all gears. Gas light was on in photos and video cause machine was low on fuel. Tight articulate, Bucket was in good shape and not worn in corners, Loader was mainly used to load trucks with sand and loose type material. 
Overall Dimensions: TBD 

Located in Mckinney, TX

 

Year: 2004
Make: CAT
Model: XQ400
Type: Commercial Generator
Hours: 16,754 HRS

Seller had CAT do a bench test for 7 hours on the unit to verify everything is in good working order, pressure tested the tank for leaks or any issues, all New insulation was added to the inside of the machine, machine is extra quite when walking around the outside. 
Tires on trailer are in good shape, Torsion axles lights on trailer all work, 2 5/16 ball. 

Located in Carrollton, TX
 

1 of 3 identical trucks available.
Year: 2005
Make: Kenworth
Model: W900
Type: Dump Truck
Miles: 82,389.2 Miles Showing. Plus 10,000 HRS on HR meter showing.
Engine: CAT C11 ACERT Diesel Engine
Trans: 13 Speed Eaton
Manual Tires: 70% Front Steers, 90% Rear Drivers

Inspection Video Click Here

Key Features:
Pre def truck, No blow by, Heavy Front end with two steering pumps, heavy front tires, 44K rear axles, demo box, electric tarp, 85% Brakes left, CB radio, smooth shifter, fleet maintained with full service records, DOT Inspected and ready to work!

Located in Roanoke, TX

1 of 3 identical trucks available.
Year: 2005
Make: Kenworth
Model: W900
Type: Dump Truck
Miles: 289,459 Miles
Engine: CAT C11 ACERT Diesel Engine
Trans: 13 Speed Eaton Manual
Tires: 80% Front Steers, 90% Rear Drivers

Inspection Video Click Here

Key Features: Pre def truck, No blow by, Heavy Front end with two steering pumps, heavy front tires, 44K rear axles, demo box, electric tarp, 4 stage lift, 85-90% Brakes left, CB radio, smooth shifter, fleet maintained with full service records, DOT Inspected and ready to work!

Located in Roanoke, TX

1 of 3 identical trucks available.
Year: 2005
Make: Kenworth
Model: W900
Type: Dump Truck
Miles: 257,479 Miles
Engine: CAT C11 ACERT Diesel Engine
Trans: 13 Speed Eaton Manual
Tires: 80% Front Steers, 90% Rear Drivers

Inspection Video Click Here

This truck will be sold with the three drop axles seen on photo 2 of the listing, where removed but can be installed very easily still pumped in cab and lines are run to the frame to be installed to air easily. Bolt in and go. 

Key Features: Pre def truck, No blow by, Heavy Front end with two steering pumps, heavy front tires, 44K rear axles, demo box, electric tarp, 85-90% Brakes left, CB radio, smooth shifter, New Turbo, all new A/C System, fleet maintained with full service records, Have the other three drop axles taken off, but can be put right back on easily, still plumbed in cab and all hoses run down the frame, will be sold with the truck, DOT Inspected and ready to work!

Located in Roanoke, TX

Year: 2013
Make: Morooka
Type: Articulated Dump Truck
Model: MST2200VD
Hours: 2,701
Cab: Enclosed ROPS

Unit starts right up from a cold start, Runs and operates as it should, engine, pumps, finals and cooling system all are free from leaks, engine has no blow by, operated the unit hard and machine doesn't skip a beat, tracks are tight and didn't attempt to throw a track, sprockets and idlers have good life left. Lights, A/C, transmission all function well when tested, machine is work ready 

Click here for Inspection Video

Located in Springtown, TX

Year: 2021
Make: Liebheer
Model: L506C 
Type: Wheel Loader
Cab: Enclosed ROPS
Hours: 182
Serial #: VATZ1816AZB066341

Key Features:

• Demo unit, very low hours 
• Aftermarket warranty available 
• US buyers can pickup in Williston, ND 58801
• A/C and heat
• 2 Speed
• Air Suspended & Heated Seat
• 3rd & 4th Valve
• Luxury Cab
• ISO Quick Coupler
• Bucket
• LED Lights
• Same Manufacturer As Deere 'L' Series

Tru?IRON COVERED COMPONENTS..pdf
USD TruNorth Rate Card For Customers.pdf

Year: 2022
Make: Hitachi
Model: ZW75- 6C
Type: Wheel Loader
Hours: 133
Cab: Enclosed ROPS
Serial #: W09P85329NBA08914

Key Features:

• Demo unit, very low hours 

• Aftermarket warranty available 

• US buyers can pick up in Williston, ND 58801 

• Quick Coupler 

• Bucket and Forks 

Tru?IRON COVERED COMPONENTS.pdf
USD TruNorth Rate Card For Customers.pdf

Year: 2016
Make: Kubota
Model: M6-141
Hours: 2,995 + or -
Cab Options: Enclosed ROPS
Engine Type: Diesel
Transmission Type

Mechanically sound, 4x4, Loader, Good tread on tires

Located in Columbus, TX

Year: 2015
Make: New Holland
Model: T4.75
Hours: 1,294 
Cab Options: Enclosed ROPS
Engine Type: Diesel

Loader

Located in Columbus, TX

Year:  2015
Make: John Deere
Model: 5085E
Type: Tractor with Loader 
Hours: 1,900 +- 

Forks only, A/C & Heat works, 3 Point Hitch, PTO, No Leaks, No blowby on engine, Starts right up in the cold or the heat, Oil is clean and free of moisture and glitter. 

Located in Rouge, TX

Year: 2020
Make: John Deere
Model: 4044M
Hours: 238 + or -
Cab Options: Open ROPS
Engine Type
Transmission Type
Tire Sizes
Hitch Type
PTO RPM
Front Loader
Electronics Options:
Options: Hydraulics, etc
Overall Dimensions

Located in Columbus, TX

Year: 2013
Make: Volvo
Model: SD45
Type: Smooth Drum Compactor
Hours: 1,023
Cab: Open ROPS
Serial #: VCE00S45K0S229026

Key Features:

• US buyers can pick up in Williston, ND 58801 

• 54" Smooth Drum Roller 

• C/W Padfoot shell kit 

• ROPS  

• Just been through the shop and has fresh service  

 

Year: 2017
Make: XCMG 
Model: CV83PD
Type: Smooth Drum Compactor
Hours: 260
Cab: Enclosed ROPS
Serial#: XUG00831JHJE04428

Key Features:

• Low hour machine  

• 66 inch Smooth Drum 

• A/C cab 

• Just been through the shop and has a fresh service  

• Located in Williston, ND 58801 

Year: 2022
Make: Ausa
Model: D150 AHG
Hours: 0
Serial #: UA100712L00090172

Key Features:

• New and unused machine  

• Factory warranty available  

• US buyers can pickup in Williston, ND 58801 

• 3300 lb - 1.18 Yd Capacity 

• 8.7 MPH 

• Kubota 21 HP Diesel 

• Hydrostatic Drive 

• 4WD 

• Articulated Steer 

• 180... Swivel Dump 

• Sealed Brakes 

• Joystick Control 

• Comfort Seat 

• Emergency Stop 

Year: 2006
Make: John Deere
Model: 1050C
Type: Crawler Dozer
Hours: 8,362 HRS 
Features: UBlade, 3 shank hydraulic vail ripper, Trans and hydraulic pump oil is clean, no smell of burned clutches, Engine oil is clean no signs of moisture or glitter. 
Undercarriage: Needs track work. Track pads are worn, some pads are broken, Sprockets are sharp, some of the top rollers need to be replaced, Rail pins are about 60-70% 

Was not able to do an operations test on machine will onsite. Buyer is responsible to remove the machine. 

Located in McKinney, TX

Brand new, never has been used.

Year: Unknown, but seller believes it is a 2020 - 2021
Make: Screen Machine
Type: 40 Ft Aggregate Conveyer
Serial# CE3640-E-AE2870

Features: Runs off of 3 phase power. Tires in still playable and in good working order. 

Located in Irving, TX
 

Year: 2015
Make: Volvo
Model: DD140HF
Type: Smooth Drum Roller
Hours; 2,300

Seller states Unit has a bad turbo on the Engine. May be other issue, engine shows some blow by. Was not able to get the water system to work.

Located in Burleson, TX 

Year: 2008
Make: Volvo
Model: DD138HF
Type: Smooth Drum Roller
Hours: 4583 HRS 
Cab: Open ROPS

Click here for Inspections Video

Located in Burleson, TX

Year: 2004
Make: Ingersoll Rand
Model: DD125
Type: Smooth Drum Roller 
Hours: 9,756
Cab: Open ROPS

Located in VENUS , TX

Year: 2011
Make: Volvo
Model: PF6170
Type: Wheeled Asphalt Paver
Hours: 3,912 HRS 
Cab: Open ROPS

Showing Codes Engine Oil Pressure Low, Has a propel issue, not responding with ECM the unit will not move from where it is sitting. Both issues are most likely sensor or reprogramming issues, as the engine start and runs normally and is not smoking or has any blowby and runs normal. The whole unit is operational as far as functions, just wont move currently. 


Located in Burleson, TX

Year: 2008
Make: Ingersoll Rand
Model: PF2181
Type: Asphalt Paver
Hours: UNKNOWN
Cab: Open ROPS

Engine sounds like it may have a slight knock, may be a clutch or something rubbing, please listen to the video and make your best evaluation. Everything works and the unit does move. 

Located in Burleson, TX

Year:1972
Make: International 
Model:E200 
VIN:540-877
Hours: Unknown- hours meter you can barley read, Seller suggest around 4,500 HRS
Cab Options: Enclosed Station 
Engine Types and Locations: D.T.-361 International Turbo Diesel Front Pull Diesel Engine
Transmission Type: Allison T-T-2220-1
Tire or Track Dimensions: Tires
Options: Push Block in rear. 
Overall Dimensions: Capacity 11.25 Tons

Tiresin front 65-70%, Rear 10-20%

Paddle Wheel scrapper
Features: Rebuilt Injection Fuel Pump, New Battery, New Turbo, Oil, Fuel and Hydraulic filters. Runs and operates well, Just got off a Job moving 1,500 YRDS and did it with zero issues, no longer need the machine, since job completion. 
Just recently started it after it sitting for a year and started right up first time, Machine has zero leaks, seller states. Great machine for someone who doesn't want to break the bank, and move a good amount of dirt efficiently.

Previously owned by a gravel pit in kettle-Falls Washington.

Please see all videos on this unit functioning and working prior to bidding. 

Click here for Additional Video

In person preview and inspection available by appointment only, Please call to schedule a showing

Machine Physically located in Bonner County, Idaho in Samuels Idaho. Close to Sandpoint, Idaho.
 

Year: 2016
Make: Kubota
Model: M7060
Type: Tractor
Enclosed ROPS
Hours: 1,045.8 HRS

Great Tire Tread, 4X4 Tractor, Rear PTO & 2 Remotes, Hitch, 4 Speed Transmission. A/C blows Cold, Heat Blows Hot

Very clean running tractor, Engine starts right up, Clean oil, No Gliter, No Moisture in Engine Case.
Ready to go shreading. Tractor is set up to put a loader on it. 

Located in Dallas, TX

Year: Unknown
Model: Genesis
Type: Generator Light Tower
Hours: 6,627

Located in Carrollton,  TX

Year: 2022
Make: Diamond 
Type: Gooseneck 27 Foot Equipment Trailer
Type Model: 24 FT TRA REM 
18,000 LB GVWR
VIN: 46UFU2420N1260896

Features: Oiled 8,000 Axles, 17.5 Heavy Duty Tires, Warn Electric Winch, Tilt bed hydraulic lowering trailer, everything works as it should, very well built trailer. In like new condition

Trailer was bought brand new, used only times to haul a 9-10,000 LB skid steer home from dealer, that's it, Been siting since.

Located in Forney, TX

Year: 2015
Make: Big Tex 
Model: 22GN-20BK+5MR
VIN: 16VGX2023F6093548
Deck Dimensions: 20FT + 5FT Dovetail
Deck Type: DoveTail
GVWR Capacity: 23,900 LBS
Axle Qty: 2 
Axle Capacity: 10000
Air Brakes Type: None, Hydraulic
Air Lift Third Axle: N/A
Suspension Type: Tortion Leaf Spring
Tire Size: 16 inch
Brake Type: Drum 
Electronics: Weight System, Auto-inflation, Hubodometer, etc.-NONE
Options: Ramps, Fold out Ramps 
Overall Dimensions: 25 FT W/ Dovetail 

Trailer located in Aurora, TX

Year: 1982 
Make: John Deere 
Model: 8650 
Hours: 10,000 on machine, 500 Hours SMOH, Hour meter shows 2,000 +- HRS
Serial Number: RW8650H003414
Details: 500 HRS on new engine overhaul, comes with all the dual wheels, 
Condition: Runs and operates as it should

Seller States Hour Meter is INOP

Seller states: Paperwork on rebuild is no longer available as the previous owner has passed away and paperwork is not available at this point. Current owner seller states has only had it the machine for the last 5 years and has only used it for 500 hours or so.

Located in Nocona, TX, JD Disk is located in same location. 

Year: 1982-1985
Make: John Deere 
Model: 335
Type: Disk Plow 

Located in Nocona, TX 

 Same location as the John Deere 8650 Articulating Tractor 

Year: Seller thinks it's around a 2010 
Make: Flexi Coil 
Model: S67XL 
VIN: S67XL-113168-02

Last used 1 year ago. Tires are in good shape. May need some minor TLC as the machine has been sitting up for a little time 

Located in Iowa Park, TX

Year: Seller States 2011 
Make: Vermeer 
Model: 604M 
Bale Size: 
Bale Diameter - max6.1 ft
Bale Diameter - min2.1 ft
Bale Weight - max2000 lbs
Bale Width4 ft
Hitch Type: Pin 
Tire Size: Unknown
Options: Hydraulic lift gate 
Overall Dimensions

Was in field last year making bails 

Located in Mineral Wells, TX

Year: Seller States 2011
Make: Vermeer
Model: 604M
Bale Size: Large Round Bail 
Bale Diameter - max6.1 ft
Bale Diameter - min2.1 ft
Bale Weight - max2000 lbs
Bale Width4 ft
Hitch Type: Pin
Tire Size: Unknown
Options: Hydraulic lift gate
Overall Dimensions

Was in field last year making bails

Located in Mineral Wells, TX

Year Estimated: 1973-1976
Make: Massey Ferguson 
Model: 655 Swather
Hours: Unknown 
Width Of Rake: 12 Foot 4 Inches
PTO Driven
Rear Delivery
Wheel Size

77 Inch outside to outside on wheels. machine is 11 ft long without head, Head is 6 ft long alone, making it 18 ft long total 

Clean Swather Everything works well, headers and header teeth are in good shape, slant 6 Chrysler gas engine that is bullet proof and runs excellent, machine sat for around 5 years put a battery in it and machine started right up and didn't skip a beat. took a 3 mile trek back to the farm where we took photos and videos of the machine. NO leaks, engine is sealed up tight, has no blow by and machine hydraulics and pumps are leak free as well. You could take this machine out and put it to work on a 300 acre field no problem. 

Comes with extra parts: Belts, cutter teeth, and others call for more details. 

Click here for an Additional Video

Located in Bonners Ferry, ID.

Seller is able to help disassemble header to transport and work with shipper or shipping company to get it loaded out. 
 

Year: 2009
Make: International
Model: 4400
Vehicle Type: Truck
Mileage: 208,339 MI
Body Type: utility box, Cab and a half
Trim Level: Durastar
Drive Line: 4x2
Engine Type: L6, 7.6L (466 CID)
Fuel Type: Diesel
Transmission: Allison Automatic 
VIN #: 1HTMKAAN79H093760

Features and Notes: Terex Hi Ranger TL41M Teleboom Bucket Lift, Winch for boom, outriggers, Inverter, Spot Light, Hydraulics for Bucket tools, Durastar Diesel Engine starts up easy even on cold starts no blow by, oil is clean, no visible leaks to be found in Drivetrain or lift, 30% tread on steer tires, 70-80% tread on drivers, Strobe Lights, Clean running truck with no damage, clean interior,went through the whole truck and operated everything and didn't come across anything that did not work, just needs a little touch up is some areas with some black paint or leave it alone and go make some money with it, be a great unit for hurricane season or tree cutting business.

Click here for Inspection Video

Located In Grand Prairie, Texas

Year: 2011
Make; International 
Model; 4400 SBA 4x2 
VIN: 3HAMKAAN0CL538177
Mileage: 126,423 Miles
Deck Dimensions: TBD
Engine Type: Maxxforce Diesel
Transmission Type: Alison Automatic 
Single or Double Axle: Single Axle 
Wheel Base: 490
Suspension: Rear Spring 
Max GVWR: 33,000
Front Axle Capacity:12,000 LBS
Rear Axle Capacity: 21,000 LBS 
Tire Sizes: 22.5 
Hydraulic Lift: Knap Hoist 
Options: Cruise Control, A/C, Power Accessories: Power Windows & Door Locks, Single Fuel Tank.

Features: tool boxes on Dumping bed, Frame tool box. No blow by on the engine, No active visible leaks on drivetrain or hoist cylinder, 30-40% tread on steers, 75-85% Tread on drivers. Some damage below the front headlight, Bed seams to be lightly used as there is no major dents or cuts in the bed. 

Located in Grand Prairie TX

CAUTION:  Seller states truck has been deleted and has an electrical issue (will not go over 40MPH- as seller has stated)

Year: 2014
Make: Kenworth 
Model: T680 
Type: High Rise Sleeper Truck
Miles: 489,698.6
Paccar MX13 Engine
Automatic Transmission


Located in Grand Prairie, TX

Year: 2013
Make: Hino
Model: 338
Type: Box Truck w/ Hydraulic Lift Gate
Miles: 252,478 MI
VIN:5PVNV8JV1D4S53472
26 Foot Box
Engine Auto Shut Down Timer
Hino Engine
Allison Transmission
33,000 GVWR


Located in Grand Prairie, TX

Year: 2015
Make: Hino
Model: 338
Type: Box Truck w/ Hydraulic Lift Gate
Box Truck Length: 26 FT
Miles: 226,560
VIN: 5PVNV8JV8F4S5463
Located in Grand Prairie, TX

Year: 2015
Make: Hino
Model: 338
Type: Box Truck w/ Hydraulic Lift Gate
Miles: 261,124
VIN: 5PVNV8JV2F4S54388
26 Foot Box
33,000 GWVR
Hino Engine
Allison Automatic Transmission

Located in Grand Prairie, TX

Year: 2015
Make: Hino
Model: 338
Type: Box Truck w/ Hydraulic Lift Gate
Miles: 266,956
VIN:5PVNV8JV1F4S54348
Hino Engine
Allison Automatic Transmission
26 Foot Box
33,000 GVWR


Located in Grand Prairie, TX

Year: 2009
Make: Hino
Model: 338
Type: Box Truck w/ Hydraulic Lift Gate
Miles: 205,647 MI
VIN#5PVNV8JT794S12379
Hino Engine
Allison Automatic Transmission
33,000 GVWR

Located in Grand Prairie, TX

CAUTION: Steering is grabby- truck either needs a new pump, steering box or a system flush

Year: 2015
Make: Hino
Model: 338
Type: Box Truck w/ Hydraulic Lift Gate
Hino Engine
Allison Automatic Transmission
Miles: 242,338 
VIN:5PVNV8Jv6F4S54393

Located in Grand Prairie, TX
 

Year:2020
Make: VTOPs 
Model: Granular filling machine

This Vtops Filling machine is brand new unused , assembled and calibrated then never used for its purpose. 

Self filling, Automated to fill products weighted out and put into bags or jars, use for makeup, protein powder, dog food, soil samples, etc

Granular filling machine

Dump material into containers operated by foot control. 

Click here for Additional Video

Machine is located in Gilbert, AZ

In person preview by appointment by appointment only. Please call ahead. 



 

Make: Allkaz
Type: 110 V Electric Sandbag Filler
Serial #: 0060-B

Like new condition
Capable of bagging sand and gravel
Half cubic yards sacks

Located in McKinney, TX

Year: 2007 
Make: International
Model: 4700
Type: Delivery Truck
Miles: 293,608 MI
Engine: DT466
VIN: 1HTMMAAN97H359061

8 BAY BEVERAGE BODY. BAY DIMENSIONS 52X44 INCH FITS 4X5 PROSTACK RACKS 40 5 GALLON BOTTLES.

25,999LB GVWR

Located in Carrollton, TX

Year: 2007 
Make: Ford
Model: F-750
Type: Delivery Truck
Engine: CAT
Miles: 274,484 MI 

Features: 10 BAY BEVERAGE BODY. BAY DIMENSIONS 40X40 INCH FITS 3X5 PROSTACK RACKS 30 5 GALLON BOTTLES.
25,999 LBS GVWR 
Located in Carrollton, TX

Year: 2010
Make: International
Model: 4700 
Type: Delivery Truck
Engine: Maxforce Diesel 
Miles: 248,616 MI 
8 BAY BEVERAGE BODY. BAY DIMENSIONS 40X40 INCH FITS 3X5 PROSTACK RACKS 30 5 GALLON BOTTLES.
25,999LB GVWR

Located in Carrollton, TX

Year:
Make: Ford
Model: F750
Type: Super Duty Delivery Truck
Engine: CAT
Miles:

Located in Carrollton, TX

Year: Unknown
Make: John Deere
Model: 48
Type: Backhoe Attachment 

All Controls moved, has been hooked up to a skid steer all the controls and cylinders functioned normally without any leaks, the seat is rusted pretty bad.

Located in Dallas, TX