|
|
Folding Knife Made by Frank Centofante Lot #1 (Sale Order 1 of 333) Blade Length 3 1/16 inches
Frame Lengthe 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraved by Martin Butler. Bulino with raised 24k inlays About the Knifemaker: Frank Centofante began making knives in 1968 and is considered a pioneer in the custom knife movement. He joined the Knifemaker?s Guild in 1971 and became a full-time knifemaker in 1977 after a long and successful career as a fireman and EMT. He served 18 years as a member of the board of directors of the Knife Maker?s Guild, and 9 of those as President. He was inducted into the Blade Magazine Cutlery Hall of Fame in 1997. Frank passed away in 2009. About the Engraver: Martin Butler has been engraving since the age of 15 when he started an apprenticeship engraving sporting firearms for Webley & Scott in England. Since then he has developed his art, specializing in embellishing fine art knives. With his traditional engraving skills as a foundation, Martin was one of the pioneers in the world of art knives, working with top makers to create masterpieces of weaponry that are far too valuable to ever be used for anything other than sheer appreciation. Both the appreciation of the artists' skills and the appreciation in the value of his pieces makes Martin Butler's engraved art a rare and valuable asset for any collector or purveyor of fine knives. Appraisal Value: $5500 |
|
|
Made by Frank Centofante Lot #2 (Sale Order 2 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/6 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone About the Knifemaker: Frank Centofante began making knives in 1968 and is considered a pioneer in the custom knife movement. He joined the Knifemaker?s Guild in 1971and became a full-time knifemaker in 1977 after a long and successful career as a fireman and EMT. He served 18 years as a member of the board of directors of the Knife Maker?s Guild, and 9 of those as President. He was inducted into the Blade Magazine Cutlery Hall of Fame in 1997. Frank passed away in 2009. Appraisal Value: $2550 |
|
|
Made by Alex Daniels Lot #3 (Sale Order 3 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with Gold pins and Escutcheon Engraver: Jere Davidson, Relieved Scroll About the Knife Maker: Alex Daniels sold his first knife in 1963. He was a member of the American Bladesmith Society and a member of the Knifemaker?s Guild since 1982. He was also an instructor at Jim Batson?s Hemmer-In. He is best known for his reproductions of old original Bowies. All of his knives are made by hand start to finish, including his own heat treating. Alex Daniels passed away in 2018. About the Engraver: Jere Davidson Relies on traditional chasing hammers and engraver's chisels, Davidson earned his wings the old fashioned way -- as an apprentice to master engraver Ken Hurst. A student of historical firearms, Davidson was strongly influenced by the great American master, Louis D. Nimschke who was one of Colt's most famous engravers. Davidson also credits Winston Churchill and Lynton McKinzie as enduring influences on his style. He is a factory engraver for Dakota Arms and Connecticut Valley Shotguns as well as doing some occasional work for Colt and Freedom Arms. Davidson?s specialty is the Bolino or "bank note" style of game scenes. His flushing dogs and fowl on the wing are breathtakingly realistic and always balanced with complementary scrollwork. From engraving custom knives for Saudi royal families, to being one of the only allowed contract engravers of English Purdey rifles. Somewhere in the middle of rural Virginia resides a very humble man who's notable and talented career spans twenty plus years in his craft. Appraisal Value: $2350 |
|
|
Made by T.M. Dowell Lot #4 (Sale Order 4 of 333) Blade Length: 1 1/2 inches
Frame Length: 2 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Steel Handle Material: Fossil Mammoth Engraver: Ron Scaggs, Relieved Scroll About the Knife Maker: Ted Dowell was from Bend, OR and sold his first knife in 1967. He was a founding member and past president of the Knife Maker?s Guild. Ted was a true pioneer of the KMG and known for his ?Funny Folder? design. He specialized in integral hunting knives in D2, BG42 and Vascowear. Ted passed away in 2012. About the Engraver: Ron Scaggs, Master Engraver Appraisal Value: $2400 |
|
|
Made by Kaj Embretsen Lot #5 (Sale Order 5 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Damascus Engraver: Lisa Tomlin, Relived Scroll with 24k Vines About the Knife Maker: Kaj Embretsen has been a fulltime knifemaker since 1983. He makes folders, daggers, fighters and hunting knives and his own Damascus steel. He has been voting member of The Knifemakers Guild in America since 1989 as well as a member of The German Knifemakers Guild, The Italian Knifemakers Guild, The Norwegian Knife Association, and The American Bladesmith?s Society. About the Engraver: Lisa Tomlin is a master engraver who?s an expert at doing it right. She started engraving in 1983 when she was hired by Ken Hurst. Eventually she went out on her own, working on custom knives and then firearms. Today, she has engraved firearms for everyone from former President George H.W. Bush and General Normal Schwarzkopf to movie director/screen writer John Milius. Appraisal Value: $4200 |
|
|
Made by Fecit Hills Knives Lot #6 (Sale Order 6 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Engraver: Alain Lovenberg, green and rose gold inlays, line engraved detail with diamond inlays About the Engraver: Alain Lovenberg, Master Engraver, is one of the five best and most sought-after engravers in the world. The names of wealthy clients from the USA, Russia or the Gulf States remain unknown. On the other hand, it is no secret that star director Steven Spielberg had a Colt revolver engraved by him and that he artfully decorated a hunting rifle for King Hassan of Morocco. Appraisal Value $5500 |
|
|
Made by Warren Osborne Lot #7 (Sale Order 7 of 333) Blade Length: 3 5/8 inches
Frame Length: 4 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Biggs Jasper Engraver: Ray Cover, Relieved scroll with 24k veins About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. About the Engraver: Ray Cover is from Mineral Point MO and began his artistic career as a scrimshander. He is an accomplished engraver working mostly on knives, guns, and fly fishing equipment Appraisal Value: $4700 |
|
|
Made by Anthony Fogarizzu Lot #8 (Sale Order 8 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Unknown, 24k and green gold inlays, along with silver, tiny English scroll background About the Maker: Antonio Fogarizzu is a famous Italian craftsman who has been creating premium knives for over 20 years. The Master's works belong to the Fine Art category and each of them, without exaggeration, is a masterpiece of applied art. Antonio's knives are not just a testament to the author's excellence, this kind of work is usually called collector's grail. Each piece is one-off and handcrafted. Hereditary Knifemaker was born in the city of Pattada on the island of Sardinia, where he lives and works in the family workshop to this day. In 2016, the Fogarizzu family's knife industry celebrated its bicentennial. Antonio's ancestors were directly related to the formation of the knife craft in Sardinia* during the era of the Napoleonic wars and the Unification of Italy. His father Salvatore taught him the intricacies of the family profession. Currently, Antonio Fogarizzu produces no more than eight knives annually. He is a member of the Italian Knifemaker Guild. Antonio became the first Italian knifemaker who made his colored Damascus mosaic. As Antonio recounts in an exclusive interview with Maria Stalina Knives: ?There is an opinion that those who make Damascus cannot make a good knife and vice versa. Supposedly you are either a master blacksmith or a guru of knife making. I decided to destroy this stereotype by all means". Appraisal Value: $5800 |
|
|
Made by Tore Forgarizzu Lot #9 (Sale Order 9 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Piqued Antique Tortoiseshell About the Maker: Tore Forgarizzu has been a full-time knife maker since 1985 and a member of the Italian Custom Knife Guild for more than 20 years. He became an apprentice to his father at 14 years old, learning to make traditional knives and decorative wrought iron. He learned the the meticulous precision processing of Damascus forging from his father. He is a 4th generation knife maker whose ancestors were directly related to the formation of the knife craft in Sardinia* during the era of the Napoleonic wars and the Unification of Italy Appraisal Value: $7500 |
|
|
Made by Andy Shinosky Lot #10 (Sale Order 10 of 333) Blade Length: 3 inches
Frame Length: 4 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Black lip pearl Engraver: Andy Shinoski, relieved scroll with 24k leaves and folds About the Maker and Engraver: Andy Shinosky, Australian Custom Knife Maker and Engraver. Appraisal Value: $4000 |
|
|
Made by Rick Genovese Lot #11 (Sale Order 11 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Jade and White Mother of Pearl Engraver: Ray Cover, Relieved scroll with 24k and copper inlays; Gamblers Theme About the Maker: Rick Genovese Arizona Knife Maker About the Engraver: Ray Cover is from Mineral Point MO and began his artistic career as a scrimshander. He is an accomplished engraver working mostly on knives, guns, and fly fishing equipment Appraisal Value: $5000 |
|
|
Made by Rick Genovese Lot #12 (Sale Order 12 of 333) Blade Length: 3 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Jade Engraver: Brian Hochstrat, Bulino style engraving with 24k and rose gold inlays Appraisal Value: $4500 |
|
|
Made by Rick Genovese Lot #13 (Sale Order 13 of 333) Blade Length: 2 inches
Frame Length: 2 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Sea Snail Engraver: Ray Cover, Bulino style engraving with 24k inlays Appraisal Value: $3900 |
|
|
Made by Rick Genovese Lot #14 (Sale Order 14 of 333) Blade Length: 3 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl and Blue Lapis Engraver: Brian Hochstrat, Relieved Scroll with 24k inlays Appraisal Value: $4300 |
|
|
Made by Royal Hansen Lot #15 (Sale Order 15 of 333) Blade Length: 3 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl and Blacklip Pearl About the Maker: Royal Hanson was from Roseburg OR and sold his first knife in 1977. He specialized practical folding, boot, and hunting knives in 154CM, 440C, or D2 steels. Royal passed away in 1985. Appraisal Value: $3200 |
|
|
Made by Royal Hansen Lot #16 (Sale Order 16 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone and Paua About the Maker: Royal Hanson was from Roseburg OR and sold his first knife in 1977. He specialized practical folding, boot, and hunting knives in 154CM, 440C, or D2 steels. Royal passed away in 1985. Appraisal Value: $4300 |
|
|
Made by Tim Herman Lot #17 (Sale Order 17 of 333) Blade Length: 3 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Tigereye Engraver: Tim Herman, relieved scroll with 24k vines About the Maker and Engraver: Tim Herman is from Olathe KS and sold his first knife in 1978. He specializes in investment-grade folding knives with ATS 34 steel and his own engraving/carving. Appraisal Value: $4500 |
|
|
Made by Richard Hodgson Lot #18 (Sale Order 18 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold lip Pearl About the Maker: Richard Hodgson was one of the most highly regarded knife makers ever to produce folders. He spent most of his career working for NASA making one of-a-kind high-precision parts for spacecraft, and he made knives on the side. Hodgson?s fit and finish are second to none and he was especially known for his innovative bearings, fasteners and release mechanisms. He was a member of the AKI. He did not make very many knives and they have become very difficult to obtain since his death. Appraisal Value: $6500 |
|
|
Made by Tim Herman Lot #19 (Sale Order 19 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Siberian Green Jade Engraver: Tim Herman, relieved scroll About the Maker: Tim Herman is from Olathe KS and sold his first knife in 1978. He specializes in investment-grade folding knives with ATS 34 steel and his own engraving/carving. Appraisal Value: $5900 |
|
|
Made by Tim Herman Lot #20 (Sale Order 20 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl About the Maker: Tim Herman is from Olathe KS and sold his first knife in 1978. He specializes in investment-grade folding knives with ATS 34 steel and his own engraving/carving. Appraisal Value: $2600 |
|
|
Made by Steve Hoel Lot #21 (Sale Order 21 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Meteorite Engraver: Michael Collins, relieved scroll About the Maker: Steve Hoel made his first fixed blade knife in 1953. In 1974 Steve Hoel ventured to California, where he spent three days in the shop of Bob Loveless and Steve R. Johnson, who were partners at that time. This was his first real exposure to the manufacturing process of high quality handmade knives, an experience that gave him a big boost in his technical aspect. He also developed an interest in folding pocketknives during this period. Shortly thereafter he made his first interframe and multiblade folders. In 1978, he joined the Knifemakers Guild, and one year later he retired from his warehouse job and began making knives full time. When Steve made his first knife in 1953, he did not have any sophisticated tooling such as a surface grinder or a mill. His simple manufacturing methods included files, sandpaper and drills. Steve was one of the first to design his knife shapes for engraving. He worked closely with the master engravers including Lynton MacKenzie and Steve Lindsay to develop the engraveable art knife design. Steve says he believes he was the maker who first brought the engraver Sam Alfano into the knife world. Steve has developed the careers of many engravers and is still finding and developing new engraving talent today. His shop is now quite sophisticated and he is a master maker of inter-frame folding knives About the Engraver: Accomplished Artist and Engraver, Brother of Blackie Collins Appraisal Value: $4800 |
|
|
Made by Steve Hoel Lot #22 (Sale Order 22 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Blue Lapis Engraver: Tim Adlam, Relieved scroll with 24k highlights Steve Hoel made his first fixed blade knife in 1953. In 1974 Steve Hoel ventured to California, where he spent three days in the shop of Bob Loveless and Steve R. Johnson, who were partners at that time. This was his first real exposure to the manufacturing process of high quality handmade knives, an experience that gave him a big boost in his technical aspect. He also developed an interest in folding pocketknives during this period. Shortly thereafter he made his first interframe and multiblade folders. In 1978, he joined the Knifemakers Guild, and one year later he retired from his warehouse job and began making knives full time. When Steve made his first knife in 1953, he did not have any sophisticated tooling such as a surface grinder or a mill. His simple manufacturing methods included files, sandpaper and drills. Steve was one of the first to design his knife shapes for engraving. He worked closely with the master engravers including Lynton MacKenzie and Steve Lindsay to develop the engraveable art knife design. Steve says he believes he was the maker who first brought the engraver Sam Alfano into the knife world. Steve has developed the careers of many engravers and is still finding and developing new engraving talent today. His shop is now quite sophisticated and he is a master maker of inter-frame folding knives Appraisal Value: $4500 |
|
|
Made by Steve Hoel Lot #23 (Sale Order 23 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl and Abalone Engraver: Steve Lindsay, relieved scroll and engraved Mother of Pearl About the Engraver: Steve Lindsay is one of the world?s most sought after engravers! Appraisal Value: $19,250 |
|
|
Made by Warren Osborne Lot #24 (Sale Order 24 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black lip pearl About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. Appraisal Value: $2700 |
|
|
Made by Warren Osborne Lot #25 (Sale Order 25 of 333) Blade Length: 3 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Ray Cover, Relieved scroll with raised 24k inlays About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. Appraisal Value: $3700 |
|
|
Made by Warren Osborne Lot #26 (Sale Order 26 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/4 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Petersite Engraver: Ron Nott, relieved scroll with 24k vines and leaves About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. About the Engraver: Ron Nott was a Master Engraver and member of the NRA, the NCCA, the Colt Collectors Association, and the Keystone Blade Association. Ron Passed away on 2010 Appraisal Value: $4500 |
|
|
Made by Warren Osborne Lot #27 (Sale Order 27 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Black lip pearl Engraver: Sam Alfano, relieved scroll with 24k vines About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. About the Engraver: Sam Alfano Master Hand Engraver Appraisal Value: $7200 |
|
|
Made by Warren Osborne Lot #28 (Sale Order 28 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold lip pearl Engraver: Sam Alfano, relieved scroll with 24k vines and figure inlays About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. About the Engraver: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. Appraisal Value: $7800 |
|
|
Made by Warren Osborne Lot #29 (Sale Order 29 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl and Green Jade Engraver: Julie Warenski, relieved scroll with 24k basket weave and raised 24k borders About the Maker: Warren Osborne a native of Australia, moved to Texas where he resided in Waxahachie for many years. He was a full-time knife maker and sold his first custom knife in 1980. He became a member of the Knife Maker?s Guild in 1985. Warren passed away in 2016. About the Engraver: Julie Warenski, world class engraver Appraisal Value: $5000 |
|
|
Made by Scott Sawby Lot #30 (Sale Order 30 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Blue Lapis Engraver: Marian Sawby, relieved flowers with 24k inlayed leaves Appraisal Value: $3300 |
|
|
Made by Steve Lindsay Lot #31 (Sale Order 31 of 333) Blade Length: 2 3/8 inches
Frame Length: 2 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Engraver: Steve Lindsay, relieved scroll with flush gold inlays Appraisal Value: $38,500.00 |
|
|
Made by Tommy Overeynder Lot #32 (Sale Order 32 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/4 inches Blade Steel: CTS-XHP Frame Steel: 416 Stainless Handle Material: Painted Jasper Engraver: Amyak Stepanyan, Relieved and carved steel with white and gold lip pearl Appraisal Value: $7800 |
|
|
Made by Tommy Overeynder Lot #33 (Sale Order 33 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/4 inches Blade Steel: CPM-154 Frame Steel: 18k Rose Gold Handle Material: Black lip pearl with rose gold pins and escutcheon Appraisal Value: $4700 |
|
|
Made by Tommy Overeynder Lot #34 (Sale Order 34 of 333) Blade Length: 3 1/8 inches
Frame Length: 4 inches Blade Steel: BG-42 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Appraisal Value: $2500 |
|
|
Made by Owen Wood Lot #35 (Sale Order 35 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 1/4 inches Blade Steel: Damascus with Owen Wood herringbone wedge Frame Steel: Damascus Handle Material: Black lip pearl, textured blued steel and 18k gold disks Appraisal Value: $6400 |
|
|
Made by Tommy Overeynder Lot #36 (Sale Order 36 of 333) Blade Length: 3 1/16 inches
Frame Length: 3 3/4 inches Blade Steel: BG-42 Frame Steel: 18K Rose Gold Handle Material: White Mother of Pearl Engraver: Julie Warenski, Relieved scroll Appraisal Value: $4900 |
|
|
Made by Tommy Overeynder Lot #37 (Sale Order 37 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: BG-42 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Jim Blair, line engraved with 24K vines and accents Appraisal Value: $3900 |
|
|
Made by Tommy Overeynder Lot #38 (Sale Order 38 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: 154-CM Frame Steel: 416 Stainless Handle Material: White Mother of Pearl and Black lip pearl Engraver: Julie Warenski, 24K raised-beaded borders, 24K scroll with relieved and colored scenes Appraisal Value: $4800 |
|
|
Made by Warren Osborne Lot #39 (Sale Order 39 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold and Black Lip Pearl Engraver: Christy George, scroll mixed with 24K vines and bead blasted background Appraisal Value: $4000 |
|
|
Made by Tommy Overeynder Lot #40 (Sale Order 40 of 333) Blade Length: 4 1/4 inches
Frame Length: 5 5/8 inches Blade Steel: BG-42 Frame Steel: 416 Stainless Handle Material: Blue Lapis Engraver: C.J. Cai, Raised and flush 24K, pure silver and copper inlays with relieved background and line style bulino Appraisal Value: $6000 |
|
|
Made by Tommy Overeynder Lot #41 (Sale Order 41 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl with Rose Gold Pins and Escutcheon Appraisal Value: $2600 |
|
|
Made by Bill Pease Lot #42 (Sale Order 42 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Sea Snail Engraver: Lisa Tomlin, Relived Scrollwork Appraisal Value: $3900.00 |
|
|
Made by Bill Pease Lot #43 (Sale Order 43 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Big Horn Sheep Horn Engraver: Gary Blanchard, Relieved 24K, 18K green and rose gold inlays and raised ceramic inlays Appraisal Value: $4000 |
|
|
Made by Bille Pease Lot #44 (Sale Order 44 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Big Horn Sheep Horn Engraver: Gary Blanchard, Relieved 24K, 18K green and rose gold inlays and raised ceramic inlays Appraisal Value: $4000 |
|
|
Made by Bill Pease Lot #45 (Sale Order 45 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Big Horn Sheep Horn Engraver: Gary Blanchard, Relieved 24K, 18K green and rose gold inlays and raised ceramic inlays Appraisal Value: $3900 |
|
|
Made by Bill Pease Lot #46 (Sale Order 46 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Big Horn Sheep Horn Engraver: Gary Blanchard, Relieved 24K 18K green and rose gold inlays with raised ceramic inlays Appraisal Value: $4000 |
|
|
Made by Rusty Preston Lot #47 (Sale Order 47 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag Appraisal Value: $1200 |
|
|
Made by Salvatore Puddu Lot #48 (Sale Order 48 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Piqued Antique Tortoise with 14K pins and fittings Appraisal Value: $7100 |
|
|
Made by Salvatore Puddu Lot #49 (Sale Order 49 of 333) Blade Length: 3 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Antique Tortoise with 18K Screws Appraisal Value: $6100 |
|
|
Made by Salvatore Puddu Lot #50 (Sale Order 50 of 333) Blade Length: 3 3/8 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Piqued Antique Tortoise with 18K pins and fittings Appraisal Value: $7000 |
|
|
Made by Howard Hitchmough Lot #51 (Sale Order 51 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 7/8 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Withe Mother of Pearl Engraver:Lisa Tomlin, relieved scroll with 24K accents and borders Appraisal Value: $4200 |
|
|
Made by Richard Hodgson Lot #52 (Sale Order 52 of 333) Blade Length: 2 1/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Jim Blair, English scroll with 24K accents, birds are raised 24K Appraisal Value: $7000 |
|
|
Made by Scott Sawby Lot #53 (Sale Order 53 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sanbar Stag Engraver: Tim George, Relieved oak leaves with 24K acorns Appraisal Value: $3200 |
|
|
Made by W.B. Smith Lot #54 (Sale Order 54 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/2 inches Blade Steel: Blued Damascus Frame Steel: Blued Damascus Handle Material: White Mother of Pearl and Black lip Pearl with 18K Spacers Engraver: W.B. Smith, Flush 24K borders and vines Appraisal Value: $5000 |
|
|
Made by Joe Kious Lot #55 (Sale Order 55 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Ray Cover, Color enameled engraving with 24K ribbon Appraisal Value: $6000 |
|
|
Made by Scott Sawby Lot #56 (Sale Order 56 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Blue Lapis Engraver: Lisa Tomlin, Relieved scroll with 25K vines and flower, rose gold inlay on escutcheon Appraisal Value: $3800 |
|
|
Made by Steve Hoel Lot #57 (Sale Order 57 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Manrico Torcoli, Bulino and line engraving Appraisal Value: $14,500.00 |
|
|
Made by Jess Horn Lot #58 (Sale Order 58 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel:ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl Appraisal Value: $2000 |
|
|
Made by Jess Horn Lot #59 (Sale Order 59 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Stag Appraisal Value: $2000 |
|
|
Made by Eugene Shadley Lot #60 (Sale Order 60 of 333) Blade Length: Longest of 5 blades 2.3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Appraisal Value: $ 4200 |
|
|
Made by Jess Horn Lot #61 (Sale Order 61 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Buffalo Horn APPRAISAL VALUE: $2800 |
|
|
Made by George Herron Lot #62 (Sale Order 62 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/14 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl APPRAISAL VALUE: $2200 |
|
|
Made by Charles Bennica Lot #63 (Sale Order 63 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 inches Blade Steel: Stainless Damasucs Frame Steel: 416 Stainless Handle Material: Blue Lapis APPRAISAL VALUE: $3800 |
|
|
Made by Steve Hoel Lot #64 (Sale Order 64 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone Engraver: Christy George, Bulino with 24K inlays APPRAISAL VALUE: $5000 |
|
|
Made by Steve Hoel Lot #65 (Sale Order 65 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Desert Ironwood Engraver: Lynton McKenzie, relieved scroll APPRAISAL VALUE: $4000 |
|
|
Made by Ron Lake Lot #66 (Sale Order 66 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Buffalo Horn and Rose Gold Pins Engraver: Steve Lindsay, relieved scroll with 24K inlays APPRAISAL VALUE: $29,500.00 |
|
|
Made by Steve Hoel Lot #67 (Sale Order 67 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE: $2100 |
|
|
Made by Steve Hoel Lot #68 (Sale Order 68 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Amyak Stepayan, Carved and relieved art deco APPRAISAL VALUE: $7700 |
|
|
Made by Steve Hoel Lot #69 (Sale Order 69 of 333) Blade Length: Blade Length 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Red Agate Engraver: Lynton McKenzie, relieved 24K scroll with raised 24K borders APPRAISAL VALUE: $6000 |
|
|
Made by Steve Hoel Lot #70 (Sale Order 70 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag APPRAISAL VALUE: $2100 |
|
|
Made by Steve Hoel Lot #71 (Sale Order 71 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Amayak Stepayan, Carved and relieved art deco APPRAISAL VALUE: $12,500.00 |
|
|
Made by Steve Hoel Lot #72 (Sale Order 72 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Ron Scaggs, 22K relieved scroll and borders, 22K raised figures APPRAISAL VALUE: $6100 |
|
|
Made by Steve Hoel Lot #73 (Sale Order 73 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Tiger Eye Stone Engraver: Christy George, 24K relieved inlays, Bulino style detail on figures APPRAISAL VALUE: $4400 |
|
|
Made by Steve Hoel Lot #74 (Sale Order 74 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Amayak Stepayan, Carved and relieved art deco APPRAISAL VALUE: $7800 |
|
|
Made by Steve Hoel Lot #75 (Sale Order 75 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Lucy Bandikova, Relieved scroll with 24K borders APPRAISAL VALUE: $5800 |
|
|
Made by Steve Hoel Lot #76 (Sale Order 76 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Palm Jade Engraver: Brian Bridges, carved and relieved APPRAISAL VALUE: $4300 |
|
|
Made by Steve Hoel Lot #77 (Sale Order 77 of 333) Blade Length: 4 1/16 inches
Frame Length: 5 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Siberian and Black Jade Engraver: Jon Robyn, relieved 24K sscroll, fine silver, relieved animals and bulino style APPRAISAL VALUE: $5800 |
|
|
Made by Steve Hoel Lot #78 (Sale Order 78 of 333) Blade Length: 3 1/16 inches
Frame Length: 3 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: John Robyn, relieved scroll with stippled shading; 24K border around Mother of Pearl APPRAISAL VALUE: $4100 |
|
|
Made by Steve Hoel Lot #79 (Sale Order 79 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Sam Alfano, relieved scroll with 24K vines APPRAISAL VALUE: $7800 |
|
|
Made by Steve Hoel Lot #80 (Sale Order 80 of 333) Blade Length: 3 inches
Frame Length: 4 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag Engraver: Robert Swartley, banknote engraving with touches of relieved scroll and 24K pins APPRAISAL VALUE: $5100 |
|
|
Made by Steve Hoel Lot #81 (Sale Order 81 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold lip pearl APPRAISAL VALUE: $4100 |
|
|
Made by Steve Hoel Lot #82 (Sale Order 82 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: With Mother of Pearl and Paua Engraver: Marty Rabeno, relieved scroll and relieved bulino with 4 diamonds APPRAISAL VALUE: $5100 |
|
|
Made by Steve Hoel Lot #83 (Sale Order 83 of 333) Blade Length: 2 7/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Tiger Eye Stine Engraver: Brian Bridges, relieved carving APPRAISAL VALUE: $4200 |
|
|
Made by Steve Hoel Lot #84 (Sale Order 84 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Lucy Bandikova, relieved scroll with 24K borders and vines APPRAISAL VALUE: $5400 |
|
|
Made by Steve Hoel Lot #85 (Sale Order 85 of 333) Blade Length: 2 7/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Apple Green Jade Engraver: Ken Hunt, Bulino style with cut lines APPRAISAL VALUE: $9200 |
|
|
Made by Steve Hoel Lot #86 (Sale Order 86 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Apple Jade Engraver: Lynton McKenzie, relieved scroll with beaded 24K background and flush 24K borders APPRAISAL VALUE: $6100.00 |
|
|
Made by Steve Hoel Lot #87 (Sale Order 87 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold Lip Pearl Engraver: Brian Bridges, relieved carving APPRAISAL VALUE: $5300 |
|
|
Made by Jess Horn Lot #88 (Sale Order 88 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone Engraver: Steve Lindsay, 24K scroll inlay with bead blasted background, 24K raised twisted wire border around outside edges APPRAISAL VALUE: $8800 |
|
|
Made by Jess Horn Lot #89 (Sale Order 89 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Martin Butler, 24K and 18K green gold inlays with bulino style engraving APPRAISAL VALUE: $4800 |
|
|
Made by Jess Horn Lot #90 (Sale Order 90 of 333) Blade Length: 2 3/4 inches
Frame Length: 2 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: GF Pedersoli, Bulino style APPRAISAL VALUE: $7800 |
|
|
Made by Durvyn Howard Lot #91 (Sale Order 91 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with Rose Gold Pins Engraver: Jon Robyn. 24K borders with bulino style engraving APPRAISAL VALUE: $11,000 |
|
|
Made by Billy Mace Imel Lot #92 (Sale Order 92 of 333) Blade Length: 2 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold Lip Pearl APPRAISAL VALUE: $ 1,200.00 |
|
|
Made by Billy Mace Imel Lot #93 (Sale Order 93 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl APPRAISAL VALUE: $1800 |
|
|
Made by Jess Horn Lot #94 (Sale Order 94 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Joe Mason, relieved scroll with 24K vines APPRAISAL VALUE: $4300 |
|
|
Made by Billy Mace Imel Lot #95 (Sale Order 95 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Hard Maple ???????APPRAISAL VALUE: $950.00 |
|
|
Made by Billy Mace Imel Lot #96 (Sale Order 96 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl ???????APPRAISAL VALUE: $1300 |
|
|
Made by Joe Kious Lot #97 (Sale Order 97 of 333) Blade Length: 4 inches
Frame Length: 5 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Biggs Jasper Engraver: Jon Robyn, relieved bulino with flush 24K inlays, raised 24K borders ???????APPRAISAL VALUE: $5500 |
|
|
Made by Joe Kious Lot #98 (Sale Order 98 of 333) Blade Length: 2 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl ???????APPRAISAL VALUE: $ 1900 |
|
|
Made by Joe Kious Lot #99 (Sale Order 99 of 333) Blade Length: 2 1/16 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless ???????APPRAISAL VALUE: $1800 |
|
|
Made by Joe Kious Lot #100 (Sale Order 100 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Ray Cover, relieved scroll with 18K gold and fine silver inlays APPRAISAL VALUE: $8800 |
|
|
Made by Joe Kious Lot #101 (Sale Order 101 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold Lip Pearl with 18K Pinks and Bale Engraver: Ray Cover, relieved scroll ???????APPRAISAL VALUE: $ 3100 |
|
|
Made by Joe Kious Lot #102 (Sale Order 102 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Christy George, Bulino engraving with bead blasted background and 24K borders ???????APPRAISAL VALUE: $3100 |
|
|
Made by Buster Warenski Lot #103 (Sale Order 103 of 333) Blade Length: 3 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Petersite Agate Engraver: Julie Warenski, relieved scroll with raised 24K beaded borders and flush 24K basketweave ???????APPRAISAL VALUE: $5200 |
|
|
Made by Ron Lake Lot #104 (Sale Order 104 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with 18K pins Engraver: Martin Butler, Bulino style engraving with 24K inlays APPRAISAL VALUE: $2200 |
|
|
Made by Ron Lake Lot #105 (Sale Order 105 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with rose gold pins includes leather holster stamped LAKE APPRAISAL VALUE: $20,800.00 |
|
|
Made by Ron Lake Lot #106 (Sale Order 106 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag and 18K pins Engraver: Martin Butler, bulino style engraving with 24K inlays ???????APPRAISAL VALUE: $22,100.00 |
|
|
Made by Ron Lake Lot #107 (Sale Order 107 of 333) Blade Length: 3 1/4 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Carved by Wolfgang Loerchner APPRAISAL VALUE: $35,100.00 |
|
|
Made by Ron Lake Lot #108 (Sale Order 108 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl with 18K pins Engraver: Lisa Tomlin, relieved scroll with bulino APPRAISAL VALUE: $32,500.00 |
|
|
Made by Ron Lake Lot #109 (Sale Order 109 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag with Rose Gold Pins Engraver: Amator Linciott, Bulino Style includes leather holster stamped LAKE APPRAISAL VALUE: $27,300.00 |
|
|
Made by Jimmy Lile Lot #110 (Sale Order 110 of 333) Blade Length: 3 1/2 inches Frame Length: 4 3/4 inches Blade Steel: ATS-34 Frame Steel: Nickel Silver Handle Material: White Mother of Pearl Engraver: Lynton McKenzie, relieved scroll APPRAISAL VALUE: $2,800 |
|
|
Made by Steve Hoel Lot #111 (Sale Order 111 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Apple Green Jade Engraver: Steve Lindsay, 18K scrolls ???????APPRAISAL VALUE: $ $6800 |
|
|
Made by Jim Minnick Lot #112 (Sale Order 112 of 333) Blade Length: 3 1/4 inches
Frame Length: 3 3/4 inches Blade Steel: Blued D-2 Frame Steel: Blued D-2 Handle Material: Antique Tortoise with Gold Pins ???????APPRAISAL VALUE: $2800 |
|
|
Made by Ron Newton Lot #113 (Sale Order 113 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Dan Wilkerson, relieved scroll with 24K and line bulino ???????APPRAISAL VALUE: $3800 |
|
|
Made by Warren Osborne Lot #114 (Sale Order 114 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Jon Robyn, relieved scroll and relieves bulino ???????APPRAISAL VALUE: $4650 |
|
|
Made by Warren Osborne Lot #115 (Sale Order 115 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with black lip pearl inlays Engraver: Sam Alfano, relieved scroll with 24K vines and raised 24K panned scroll APPRAISAL VALUE: $11,500 |
|
|
Made by Warren Osborne Lot #116 (Sale Order 116 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 18K Rose Gold Handle Material: Apple Green Jade Engraver: Lisa Tomlin, scroll APPRAISAL VALUE: $11,500.00 |
|
|
Made by Harvey McBurnett Lot #117 (Sale Order 117 of 333) Blade Length: 2 7/8 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Brown Agate Engraver: Harvey McBurnett, relieved scroll APPRAISAL VALUE: $4150.00 |
|
|
Made by Warren Osborne Lot #118 (Sale Order 118 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Tim Herman, relieved scroll and colored engraving ???????APPRAISAL VALUE: $5200 |
|
|
Made by Warren Osborne Lot #119 (Sale Order 119 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Aldo Rizzini, Line engraving on pearl ???????APPRAISAL VALUE: $4700 |
|
|
Made by Warren Osborne Lot #120 (Sale Order 120 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 18K Handle Material: White Mother of Pearl Engraver: Julie Warrenski, Scroll ???????APPRAISAL VALUE: $10,400 |
|
|
Made by Warren Osborne Lot #121 (Sale Order 121 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Dan Wilkerson, relieved scroll with 24K leaves ???????APPRAISAL VALUE: $5700 |
|
|
Made by Warren Osborne Lot #122 (Sale Order 122 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Jon Robyn, relieved scroll with 24K leaves and raised 24K borders ???????APPRAISAL VALUE: $5100 |
|
|
Made by Warren Osborne Lot #123 (Sale Order 123 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Jigged Bone ???????APPRAISAL VALUE: $2900 |
|
|
Made by Warren Osborne Lot #124 (Sale Order 124 of 333) Blade Length: 3 5/8 inches
Frame Length: 4 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Sea Snail Engraver: Mitch Moschetti, 3D Bulino ???????APPRAISAL VALUE: $7800 |
|
|
Made by Warren Osborne Lot #125 (Sale Order 125 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl ???????APPRAISAL VALUE: $2900 |
|
|
Made by David Taylor Lot #126 (Sale Order 126 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Ray Cover, relieved scroll with 24K vines ???????APPRAISAL VALUE: $4150 |
|
|
Made by Bill Tuch Lot #127 (Sale Order 127 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Carved Stainless by maker ??? ???????APPRAISAL VALUE: $5200 |
|
|
Made by Bill Tuch Lot #128 (Sale Order 128 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 carved stainless by maker ???????APPRAISAL VALUE: $4950 |
|
|
Made by Buster Warenski Lot #129 (Sale Order 129 of 333) Blade Length: 3 inches
Frame Length: 2 7/8 inches Blade Steel: ATS-34 Frame Steel: Nickel Silver Handle Material: White Mother of Pearl Engraver: Julie Warenski, relieved scroll ???????APPRAISAL VALUE: $5850 |
|
|
Made by Bill Wolf Lot #130 (Sale Order 130 of 333) Blade Length: 2 1/6 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Jade Engraver: Mitch Moschetti, Scroll with bead blasted background and 24K borders ???????APPRAISAL VALUE: $3900 |
|
|
Made by Wolfe/Herman Lot #131 (Sale Order 131 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless ?????Engraver: Carved by Wolfgang Loerchner ???????APPRAISAL VALUE: $8500 |
|
|
Made by Ken Steigerwalt Lot #132 (Sale Order 132 of 333) Blade Length: 3 1/2 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl Engraver: carved by maker ???????APPRAISAL VALUE: $3250 |
|
|
Made by Steve Hoel Lot #133 (Sale Order 133 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Amayak Stepanyan carved scroll APPRAISAL VALUE: $4600 |
|
|
Made by Tore Fogarizzu Lot #134 (Sale Order 134 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl and Rose Gold Engraver: Art Deco by the maker APPRAISAL VALUE:??????? $6800 |
|
|
Made by Joel Chamblin Lot #135 (Sale Order 135 of 333) Blade Length: 2 inches
Frame Length: 3 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Antique Tortoise shell scales and 24K gold Pins Engraver: Engraved by maker, gold escutcheon APPRAISAL VALUE:???????$2800 |
|
|
Made by Shun Fujikawa Lot #136 (Sale Order 136 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/16 inches Blade Steel: Satin Finish ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone Scales APPRAISAL VALUE:??????? $800 |
|
|
Made by Steve Hoel Lot #137 (Sale Order 137 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/16 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Edwards Black Jade Engraver: Steve Lindsay, stipple engraved with 24K inlays APPRAISAL VALUE:??????? $12,500 |
|
|
Made by Jess Horn Lot #138 (Sale Order 138 of 333) Blade Length: 2 1/4
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Stag Scale with Nickel Silver APPRAISAL VALUE:???????$1400 |
|
|
Made by Scott Sawby Lot #139 (Sale Order 139 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Blue Lapis Engraver: unidentified engraver, relieved scroll with 24K inlays Appraisal Value: $3800 |
|
|
Made by Howard Hitchmough Lot #140 (Sale Order 140 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: Damascus with Sapphire thumb stud Frame Steel: 416 Stainless Handle Material: Abalone Engraver: Lisa Tomlin, relieved scroll with 24K gold flowers Appraisal Value: $4200 |
|
|
Made by Steve Hoel Lot #141 (Sale Order 141 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Barry Hands, relieved 24K inlay scroll and 24K inletting on pearl Appraisal Value: $23,000 |
|
|
Made by Charles Bennica Lot #142 (Sale Order 142 of 333) Blade Length: 3 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Water Buffalo Horn with pink coral inlays and 24K gold trim Appraisal Value: $6500 |
|
|
Made by Scott Sawby Lot #143 (Sale Order 143 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Amethyst Engraver: Ray Cover, engraved stainless Appraisal Value: $2700 |
|
|
Made by Tim Herman Lot #144 (Sale Order 144 of 333) Blade Length: 2 7/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Jade Engraver: Tim Herman, relieved scroll with colored enamel paint APPRAISAL VALUE:??????? $6250 |
|
|
Made by Jack Busfield Lot #145 (Sale Order 145 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Engraver: Tim and Christy George, relieved scroll with 24K borders, bulino scenes inlayed with yellow, green and rose gold APPRAISAL VALUE:??????? $16,250 |
|
|
Made by Jack Busfield Lot #146 (Sale Order 146 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold Lip Pearl and Paua Shell Engraver: Steve Lindsay, relieved scroll with 24K vines and leaves APPRAISAL VALUE:??????? $20,150 |
|
|
Made by Steve Hoel Lot #147 (Sale Order 147 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Snail Engraver: Jon Robyn, relieved scroll with 24K vine and borders with bulino style scenes APPRAISAL VALUE:??????? $10,400 |
|
|
Made by Jack Busfield Lot #148 (Sale Order 148 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Engraver: TIm and Christy George, relieved scroll with 24K gold borders, bulino scenes inlayed with yellow, green and rose gold APPRAISAL VALUE:??????? $16,250 |
|
|
Made by Steve Hoel Lot #149 (Sale Order 149 of 333) Blade Length: 2 7/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Sam Alfano, relieved scroll with 24K vine and borders, bulino style scenes APPRAISAL VALUE:??????? $10,400 |
|
|
Made by Evan Allred Lot #150 (Sale Order 150 of 333) Blade Length: 2 7/8 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Engraver: Fred Carter, relieved scroll ???????APPRAISAL VALUE: $4160 |
|
|
Made by Elvin Allred Lot #151 (Sale Order 151 of 333) Blade Length: 3 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Fred Carter, relieved scroll ???????APPRAISAL VALUE: $4250 |
|
|
Made by Jack Busfield Lot #152 (Sale Order 152 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/4 inches Blade Steel: ATS034 Frame Steel: 416 Stainless Handle Material: Mother of Pearl with 18K gold APPRAISAL VALUE:??????? $1550 |
|
|
Made by Frank Centofante Lot #153 (Sale Order 153 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Stag APPRAISAL VALUE: $1200 |
|
|
Made by Joe Kious Lot #154 (Sale Order 154 of 333) Blade Length: 1 1/2 inches
Frame Length: 2 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl with 24K pins Engraver: Engraved by maker, 24K relieved scroll APPRAISAL VALUE:??????? $2400 |
|
|
Made by Emmanuel Esposito Lot #155 (Sale Order 155 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: 18K and stainless APPRAISAL VALUE:??????? $4300 |
|
|
Made by Antonio Figarizzu Lot #156 (Sale Order 156 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Mirror Polished Stainless with 24K Thumb Studs and inlayed Fuller Handle Material: Tortoise and Gold ???????APPRAISAL VALUE: $6800 |
|
|
Believed to be made by Corrado Moro but it is unmarked Lot #157 (Sale Order 157 of 333) Blade Length: 2 1/2 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE:??????? $3200 |
|
|
Made by Gayle Bradley Lot #158 (Sale Order 158 of 333) Blade Length: 3 1/8 inches
Frame Length: 4 inches Blade Steel: Damascus Frame Steel: Damascus Handle Material: White Mother of Pearl with 18K pins APPRAISAL VALUE:??????? $2200 |
|
|
Made by Gayle Bradley Lot #159 (Sale Order 159 of 333) Blade Length: 3 inches
Frame Length: 4 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Fossil Mammoth Tooth APPRAISAL VALUE:??????? $1800 |
|
|
Made by Charles Bennica Lot #160 (Sale Order 160 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Pink Coral Engraver: Manrico Torcoli, Bulino APPRAISAL VALUE:??????? $21,450.00 |
|
|
Made by Charles Bennica Lot #161 (Sale Order 161 of 333) Blade Length: 3 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Aldo Rizzini, Bulino Scroll APPRAISAL VALUE:??????? $11,700.00 |
|
|
Made by John W. Smith Lot #162 (Sale Order 162 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with 24K pins Appraisal Value: $5400 |
|
|
Made by Charles Bennica Lot #163 (Sale Order 163 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Appraisal Value: $5200 |
|
|
Made by Ron Best Lot #164 (Sale Order 164 of 333) Blade Length: 4 inches
Frame Length: 4 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Siberian Jade APPRAISAL VALUE:??????? $5200 |
|
|
Made by Ron Best Lot #165 (Sale Order 165 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless ???????APPRAISAL VALUE: $4900 |
|
|
Made by Scott Sawby Lot #166 (Sale Order 166 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: Ats-34 Frame Steel: 416 Stainless Handle Material: Abalone APPRAISAL VALUE:??????? $1700 |
|
|
Made by Michael Ulrich Lot #167 (Sale Order 167 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl with Gold Pins APPRAISAL VALUE:??????? $2100 |
|
|
Made by Tim Britton Lot #168 (Sale Order 168 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag ???????APPRAISAL VALUE: $540 |
|
|
Made by Jack Busfield Lot #169 (Sale Order 169 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Dark Green Jade Engraver: Sam Alfano, bulino scenes and 24K inlays with relieved scrolls and 24K vines ???????APPRAISAL VALUE: $12,500.00 |
|
|
Made by Jack Busfield Lot #170 (Sale Order 170 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Gold Lip Pearl APPRAISAL VALUE: $3,000.00 |
|
|
Made by Jack Busfield Lot #171 (Sale Order 171 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Sam Alfano, relieved scroll with 24K vines APPRAISAL VALUE:??????? $11,500.00 |
|
|
Made by Jack Busfield Lot #172 (Sale Order 172 of 333) Blade Length: 2 1/4 inches
Frame Length: 2 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Apple Green Jade Engraver: Tim Herman, relieved scroll with 24K vines APPRAISAL VALUE:??????? $6200 |
|
|
Made by Jack Busfield Lot #173 (Sale Order 173 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Chrysocolla Appraisal Value: 3100 |
|
|
Made by Jack Busfield Lot #174 (Sale Order 174 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Tim George, relieved scroll with 24K scrolls Appraisal Value: $7,500.00 |
|
|
Made by Jack Busfield Lot #175 (Sale Order 175 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Jon Robyn, relieved scroll APPRAISAL VALUE: $5500 |
|
|
Made by Jack Busfield Lot #176 (Sale Order 176 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Dan Wilkerson, bulino with 24K highlights APPRAISAL VALUE: $7,000 |
|
|
Made by Jack Busfield Lot #177 (Sale Order 177 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Apple Green Jade Engraver: Tim and Christy George, relieved bulino with 24K highlights APPRAISAL VALUE: $6200 |
|
|
Made by Royal Hanson Lot #178 (Sale Order 178 of 333) Blade Length: 3 7/8 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Lisa Tomlin, Bulino and relieved scroll APPRAISAL VALUE: $1800 |
|
|
Made by Frank Centofante Lot #179 (Sale Order 179 of 333) Blade Length: 3 5/8 inches
Frame Length: 4 3/4 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: White Mother of Pearl APPRAISAL VALUE: $2050 |
|
|
Made by Frank Centofante Lot #180 (Sale Order 180 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Gary Blanchard, carved and relieved leaves APPRAISAL VALUE: $3500 |
|
|
Made by Gray Taylor Lot #181 (Sale Order 181 of 333) Blade Length: 2 1/8 inches
Frame Length: 2 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with 24K pins APPRAISAL VALUE: $4800 |
|
|
Made by Fred Taylor Lot #182 (Sale Order 182 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless ??????Engraver: Fred Carter, relieved scroll APPRAISAL VALUE: $3400 |
|
|
Made by Frank Centofante Lot #183 (Sale Order 183 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Fresh Water Mother of Pearl Engraver: Louis Shanchez, relieved scroll APPRAISAL VALUE: $3200 |
|
|
Made by Frank Centofante Lot #184 (Sale Order 184 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone APPRAISAL VALUE: $1100 |
|
|
Made by Frank Centofante Lot #185 (Sale Order 185 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Julie Warenski, relieved bulino with raised 24K borders APPRAISAL VALUE: $3200 |
|
|
Made by Frank Centofante Lot #186 (Sale Order 186 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: Nickel Silver Handle Material: White Mother of Pearl APPRAISAL VALUE: $1100 |
|
|
Made by Marcel Garau Lot #187 (Sale Order 187 of 333) Blade Length: 3 1/4 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl APPRAISAL VALUE: 1200 |
|
|
Made by Ken Steigerwalt Lot #188 (Sale Order 188 of 333) Blade Length: 4 inches
Frame Length: 4 3/4 inches Blade Steel: Damascus with 24K Gold Frame Steel: 416 Stainless Handle Material: Abalone with 24K gold APPRAISAL VALUE: $1300 |
|
|
Made by Jack Busfield Lot #189 (Sale Order 189 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl and White Mother of Pearl Engraver: Jon Robyn, relieved scroll with inlayed bulino scenes APPRAISAL VALUE: $2600 |
|
|
Made by Scott Sawby Lot #190 (Sale Order 190 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Jade with Gold-Lip Pearl Engraver: Marian Sawby, relieved flowers with 24K leaves and borders APPRAISAL VALUE: $3600 |
|
|
Made by Scott Sawby Lot #191 (Sale Order 191 of 333) Blade Length: 3 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Painted Jasper and Black Jade APPRAISAL VALUE: $2400 |
|
|
Made by Scott Sawby Lot #192 (Sale Order 192 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Biggs Jasper Engraver: Marian Sawby, relieved flowers with 24K and copper inlays and flush 24K borders APPRAISAL VALUE: $3500 |
|
|
Made by Scott Sawby Lot #193 (Sale Order 193 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Mitchell Moschetti, relieved scroll APPRAISAL VALUE: $3200 |
|
|
Made by Scott Sawby Lot #194 (Sale Order 194 of 333) Blade Length: 2 5/8 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Jade Engraver: Christy George, relieved scroll with 24K gold inlays APPRAISAL VALUE: $3100 |
|
|
Made by Scott Sawby Lot #195 (Sale Order 195 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Sambar Stag APPRAISAL VALUE: $1700 |
|
|
Made by Scott Sawby Lot #196 (Sale Order 196 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 5/8 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Biggs Jasper Engraver: Marian Sawby, line style bulino with 24K borders and highlights with copper highlights APPRAISAL VALUE: $3200 |
|
|
Made by Steve Hoel Lot #197 (Sale Order 197 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl Engraver: Unknown engraver, line style bulino APPRAISAL VALUE: $1600 |
|
|
Made by Ron Lake Lot #198 (Sale Order 198 of 333) Blade Length: 3 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Stag Engraver: Steve Lindsay, Relieved scroll APPRAISAL VALUE: $14,500.00 |
|
|
Made by Scott Sawby Lot #199 (Sale Order 199 of 333) Blade Length: 3 3/4 inches
Frame Length: 4 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Morrisonite Jasper and Black Jade APPRAISAL VALUE: $2000 |
|
|
Made by Scott Sawby Lot #200 (Sale Order 200 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Royal Sahara Jasper Engraver: Marian Sawby, relieved, line style bulino with 24K and copper inlays APPRAISAL VALUE: $3400 |
|
|
Made by Scott Sawby Lot #201 (Sale Order 201 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Lavender Agate APPRAISAL VALUE: $2200 |
|
|
Made by Scott Sawby Lot #202 (Sale Order 202 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Bloodstone Jasper APPRAISAL VALUE: $2500 |
|
|
Made by Scott Sawby Lot #203 (Sale Order 203 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 5/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Royal Imperial Jasper Engraver: Jason Favre, stippled and line style bulino with flush 24K inlays APPRAISAL VALUE: $3600 |
|
|
Made by Scott Sawby Lot #204 (Sale Order 204 of 333) Blade Length: 3 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl and Red Agate APPRAISAL VALUE: $2300 |
|
|
Made by Scott Sawby Lot #205 (Sale Order 205 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Damascus and Black-Lip Pearl APPRAISAL VALUE: $2800 |
|
|
Made by Steve Hoel Lot #206 (Sale Order 206 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Blue Jasper and 24K Engraver: Steve Lindsay, Flush Scroll and Hashed 24K APPRAISAL VALUE: $8600 |
|
|
Made by Scott Sawby Lot #207 (Sale Order 207 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Green Sea Snail APPRAISAL VALUE: $2100 |
|
|
Made by Scott Sawby Lot #208 (Sale Order 208 of 333) Blade Length: 2 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl with 18K Pins APPRAISAL VALUE: $1900 |
|
|
Made by Scott Sawby Lot #209 (Sale Order 209 of 333) Blade Length: 2 5/8 inches
Frame Length: 3 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE: $2400 |
|
|
Made by Scott Sawby Lot #210 (Sale Order 210 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Lucy Bandikova, scroll with stippled background and 24K vines APPRAISAL VALUE: $3500 |
|
|
Made by Eugene Shadley Lot #211 (Sale Order 211 of 333) Blade Length: 2 1/16 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl with 14K pins and Escutheon Engraver: Julie Warenski, relieved scroll with raised beaded 24K borders APPRAISAL VALUE: $1750 |
|
|
Made by Eugene Shadley Lot #212 (Sale Order 212 of 333) Blade Length: 1 1/4 inches
Frame Length: 2 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE: $1000 |
|
|
Made by Charles Bennica Lot #213 (Sale Order 213 of 333) Blade Length: 2 3/4 inches
Frame Length: 4 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Pink Coral Engraver: Ray Cover, Color enameled engraving APPRAISAL VALUE: $12,000 |
|
|
Made by Corbit Sigman Lot #214 (Sale Order 214 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Abalone APPRAISAL VALUE: $1400 |
|
|
Made by Tim Herman Lot #215 (Sale Order 215 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Opal Engraver: Tim Herman, relieved scroll with 23K vines APPRAISAL VALUE: $8500 |
|
|
Made by Ken Steigerwalt Lot #216 (Sale Order 216 of 333) Blade Length: 4 inches
Frame Length: 5 inches Blade Steel: ATS-34 Frame Steel: Carved 416 Stainless with carved 18K yellow and rose gold accents Handle Material: Black Lip Pearl with Rose Gold Pins APPRAISAL VALUE: $3800 |
|
|
Made by Ken Steigerwalt Lot #217 (Sale Order 217 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl with Rose Gold Pins APPRAISAL VALUE: $3700 |
|
|
Made by Ken Steigerwalt Lot #218 (Sale Order 218 of 333) Blade Length: 3 3/8 inches
Frame Length: 4 1/8 inches Blade Steel: ATS-34 Frame Steel: Carved 416 Stainless and 18K Handle Material: Black Lip Pearl with 18K pins APPRAISAL VALUE: $3700 |
|
|
Made by Ken Steigerwalt Lot #219 (Sale Order 219 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 3/8 inches Blade Steel: Damascus Frame Steel: Carved 416 Stainless Handle Material: Black Pin Shell with 18K Highlights and Pins APPRAISAL VALUE: $4500 |
|
|
Made by Gray Taylor Lot #220 (Sale Order 220 of 333) Blade Length: 2 inches
Frame Length: 3 1/16 inches Blade Steel: ATS-34 Frame Steel: 18K Rose Gold Handle Material: White Mother of Pearl with 18K Rose Gold Pins and Escutcheons Engraver: Julie Warenski, relieved scroll APPRAISAL VALUE: $7200 |
|
|
Made by Gray Taylor Lot #221 (Sale Order 221 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 3/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Andy Shinosky, relieved scroll with 24K leaves and vines APPRAISAL VALUE: $4200 |
|
|
Made by Owen Wood Lot #222 (Sale Order 222 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Tiger-Eye, Mother of Pearl and 24K gold APPRAISAL VALUE: $1200 |
|
|
Made by Tuck Lot #223 (Sale Order 223 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Carved Art Deco Stainless APPRAISAL VALUE: $1100 |
|
|
Made by Ken Steigerwalt Lot #224 (Sale Order 224 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/2 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE: $1400 |
|
|
Made by Richard Hodgson Lot #225 (Sale Order 225 of 333) Blade Length: 2 1/4 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Ray Cover, relieved scroll APPRAISAL VALUE: $3100 |
|
|
Made by T.R. Overeynder Lot #226 (Sale Order 226 of 333) Blade Length: 4 inches
Frame Length: 4 1/2 inches Blade Steel: CTS-XHP Frame Steel: 416 Stainless Handle Material: Edwards Black Jade and 24K Engraver: Brian Hochstrat, 24K Flush Scroll APPRAISAL VALUE: $3400 |
|
|
Made by Jess Horn Lot #227 (Sale Order 227 of 333) Blade Length: 3 1/16 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Stag APPRAISAL VALUE: $1100 |
|
|
Made by TM Dowell Lot #228 (Sale Order 228 of 333) Blade Length: 3 3/8 inches
Frame Length: 4 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Desert Ironwood APPRAISAL VALUE: $1200 |
|
|
Made by George Herron Lot #229 (Sale Order 229 of 333) Blade Length: 3 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Burlwood Scales APPRAISAL VALUE: $1200 |
|
|
Made by Frank Centofante Lot #230 (Sale Order 230 of 333) Blade Length: 4 3/8 inches
Frame Length: 5 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl APPRAISAL VALUE: $1500 |
|
|
Unknown Maker Lot #231 (Sale Order 231 of 333) Blade Length: 3 1/4 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Art Deco Stainless APPRAISAL VALUE: $900 |
|
|
Made by Tore Figarizzo Lot #232 (Sale Order 232 of 333) Prototype
Blade Length: Frame Length: Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Stainless with yellow and rose gold |
|
|
Made by Harvey Otis Burnette Lot #233 (Sale Order 233 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl Engraver: Bulino Scene with 24K APPRAISAL VALUE: $6200 |
|
|
Made by Bill Ruple Lot #234 (Sale Order 234 of 333) Blade Length: 2 1/2 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Tortoise with 24K pins APPRAISAL VALUE: $800 |
|
|
Made by Frank Centofante Lot #235 (Sale Order 235 of 333) Blade Length: 3 inches
Frame Length: 3 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Tortoise and 24K Engraver: Relieved scroll and 24K leaves and vines APPRAISAL VALUE: $4800 |
|
|
Made by Alexis Lecocq Lot #236 (Sale Order 236 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Art Deco Stainless APPRAISAL VALUE: $1100 |
|
|
Made by Bartosz Herman Lot #237 (Sale Order 237 of 333) Blade Length: 2 3/8 inches
Frame Length: 3 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Relieved scroll APPRAISAL VALUE: $1200 |
|
|
Made by John W. Smith Lot #238 (Sale Order 238 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 1/2 inches Blade Steel: Damascus with Diamond Thumb Stud Frame Steel: Damascus Handle Material: Damascus, Mother of Pearl and 24K APPRAISAL VALUE: $1400 |
|
|
Made by Phil Boguszewski Lot #239 (Sale Order 239 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE: $1200 |
|
|
Made by Warren Osborne Lot #240 (Sale Order 240 of 333) Blade Length: 3 1/2 inches
Frame Length: 4 3/4 inches Blade Steel: Damascus Frame Steel: 416 Stainless Handle Material: Black Lip Pearl and 24K Pins Engraver: T.J.H, Art Deco APPRAISAL VALUE: $3600 |
|
|
Made by Steve Hoel Lot #241 (Sale Order 241 of 333) Blade Length: 3 1/4 inches
Frame Length: 3 7/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: unknown engraver, relieved scroll with 24K vines APPRAISAL VALUE: $3200 |
|
|
Made by Eldon Peterson Lot #242 (Sale Order 242 of 333) Blade Length: 3 inches
Frame Length: 4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Mother of Pearl Engraver: Relieved scroll APPRAISAL VALUE: $2100 |
|
|
Made by Richard Hodgeson Lot #243 (Sale Order 243 of 333) Blade Length: 2 1/4 inches
Frame Length: 2 3/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl Engraver: Stepanyan, carved Stainless and relieved scroll APPRAISAL VALUE: $5200 |
|
|
Made by Royal H. Hanson Serial No. 001 Lot #244 (Sale Order 244 of 333) Automatic Blade Length: 4 3/16 inches
Frame Length: 5 1/4 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl and Abalone Please Note: This blade opens automatically by depressing the center Abalone Shell APPRAISAL VALUE: $1100 |
|
|
Made by Royal Hanson Lot #245 (Sale Order 245 of 333) Blade Length: 3 3/8 inches
Frame Length: 4 1/4 inches Blade Steel: ATS-34 Frame Steel: Nickel Silver Handle Material: Sambar Stag Engraver: Takeuchi, relieved scroll APPRAISAL VALUE: $3400 |
|
|
Made by W. D. Pease Lot #246 (Sale Order 246 of 333) Blade Length: 3 inches
Frame Length: 4 1/8 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: White Lipped Pearl with 24K Pins APPRAISAL VALUE: $1200 |
|
|
Made by Jeff Claiborne Lot #247 (Sale Order 247 of 333) Blade Length: 2 3/4 inches
Frame Length: 3 1/2 inches Blade Steel: ATS-34 Frame Steel: 416 Stainless Handle Material: Black Lip Pearl APPRAISAL VALUE: $1200 |
|
|
Made by Scott Sawby Lot #248 (Sale Order 248 of 333) Blade Length: 5 7/8 inches
Frame Length: 5 7/8 inches Blade Steel: CPM-254 Frame Steel: 416 Stainless Handle Material: White Mother of Pearl APPRAISAL VALUE: $1200 |
|
|
Made by Kai Embretsen Lot #249 (Sale Order 249 of 333) Blade Length: 3 3/4 inches
Frame Length: 5 1/8 inches Blade Steel: Damascus with 24K Pins Frame Steel: 416 Steel Handle Material: Damascus and Black Lip Pearl with 24K Pins APPRAISAL VALUE: $2800 |
|
|
2013 Dozier Tactital Knife Lot #250 (Sale Order 250 of 333) 3 inch Blade
|
|
|
Made by Ruffin Johnson Lot #251 (Sale Order 251 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 3/4 inches Blade Steel: 440-C Guard and Pommel: 416 Stainless Handle Material: Dyed Maple and White Linen Micarta With Leather Sheath APPRAISAL VALUE: $700 |
|
|
Made by Bob Loveless Lot #252 (Sale Order 252 of 333) Blade Length: 4 inches
Handle Length: 4 3/8 inches Blade Steel: ATS-34 Guard and Pommel: Nickel and Silver Pins: Nickel Silver and Brass Handle Material: Sambar Stag Includes Leather Sheath Stamped, Bob Loveless APPRAISAL VALUE: $5500 |
|
|
Made by Dietmar Kessler Lot #253 (Sale Order 253 of 333) Blade Length: 3 1/4 inches
Handle Length: 4 inches Blade Steel: Stellite 6-K Guard and Pins: Nickel Silver Handle Material: Briarwood With Leather Sheath APPRAISAL VALUE: $800 |
|
|
Made by Dick Hodgson Lot #254 (Sale Order 254 of 333) Blade Length: 2 7/8 inches
Handle Length: 4 inches Blade Steel: ATS-34 Frame Steel: Integral Frame of ATS-34 Handle Material: Sambar Stag With Leather Sheath APPRAISAL VALUE: $2400 |
|
|
Made by Steve Hoel Lot #255 (Sale Order 255 of 333) Blade Length: 4 inches
Handle Length: 3 3/4 inches Blade Steel: ATS-34 Guard and Pins: 416 Stainless Handle Material: White Mother of Pearl With Leather Sheath APPRAISAL VALUE: $2000 |
|
|
Made by Thad Buchanan Lot #256 (Sale Order 256 of 333) Blade Length: 4 inches
Handle Length: 4 3/8 inches Blade Steel: 440-C Guard: 416 Stainless Handle Material: Sambar Stag Includes Leather Sheath APPRAISAL VALUE: $850 |
|
|
Made by Reinhart Tschager Lot #257 (Sale Order 257 of 333) Blade Length: 3 1/2 inches
Handle Length: 3 inches Blade Steel: ATS-34 Handle Material: White Mother of Pearl Engraved By: Verlerio Peli, 24K flush inlay with relieved bulino scroll Includes Alligator Leather Sheath with Gold Rosette APPRAISAL VALUE: $3500 |
|
|
Made by Ruffin Johnson Lot #258 (Sale Order 258 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 1/4 inches Blade Steel: 440-C Guard and Pommel: 416 Stainless Handle Material: Rosewood and Stag With Leather Holster APPRAISAL VALUE: $800 |
|
|
Made by Steve Johnson Lot #259 (Sale Order 259 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard:416 Stainless Handle Material: Black Buffalo Horn Engraved By: Steve Lindsay Please Note: This knife was made as a set and matches lot 260 and 261 APPRAISAL VALUE: $3800 |
|
|
Made by Steve Johnson Lot #260 (Sale Order 260 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard:416 Stainless Handle Material: Black Buffalo Horn Engraved By: Steve Lindsay Please Note: This knife was made as a set and matches lot 259 and 261 APPRAISAL VALUE: $3800 |
|
|
Made by Steve Johnson Lot #261 (Sale Order 261 of 333) Blade Length: 3 1/4 inches
Handle Length: 4 inches Blade Steel: ATS-34 Guard:416 Stainless Handle Material: Black Buffalo Horn With Leather Holster stamped Maxfield Engraved By: Steve Lindsay Please Note: This knife was made as a set and matches lot 259 and 260 APPRAISAL VALUE: $3800 |
|
|
Made by Bob Loveless Lot #262 (Sale Order 262 of 333) Blade Length: 3 3/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pommel and Pins: 416 Stainless Handle Material: Briarwood Engraved By: Dan Wilkerson, Raised and flush pure silver and 24K, carved bulino With Leather Sheath Stamped Loveless APPRAISAL VALUE: $7200 |
|
|
Made by Ted Dowell Lot #263 (Sale Order 263 of 333) Blade Length: 4 1/2 inches
Handle Length: 4 3/4 inches Blade Steel: CPM 154-CM Guard and Pommel: 154-CM integral Handle Material: Burled Walnut With Leather Sheath APPRAISAL VALUE: $1800 |
|
|
Made by Dietmar Kressler Lot #264 (Sale Order 264 of 333) Blade Length: 3 7/8 inches
Handle Length: 4 1/2 inches Blade Steel: CPM 154-CM Guard and Pommel: CPM 154-CM integral Handle Material: Sambar Stag APPRAISAL VALUE: $2800 |
|
|
Made by Steve Johnson Lot #265 (Sale Order 265 of 333) Blade Length: 2 3/8 inches
Handle Length: 3 3/4 inches Blade Steel: ATS-34 Guard and Pommel: ATS-34 Handle Material: White Mother of Pearl Engraver: TH, Raised scroll with 24K APPRAISAL VALUE: $2500 |
|
|
Made by George Trout Lot #266 (Sale Order 266 of 333) Blade Length: 4 3/4 inches
Handle Length: 4 3/8 inches Blade Steel: 440-C Guard: Nickel Silver Handle Material: Burled Desert Ironwood APPRAISAL VALUE: $550 |
|
|
Made by Roger Jolley Lot #267 (Sale Order 267 of 333) Blade Length: 4 1/2 inches
Handle Length: 4 5/8 inches Blade Steel: 440-C Guard and Pommel:416 Stainless Handle Material: Burled Desert Ironwood With Leather Sheath APPRAISAL VALUE: $850 |
|
|
Made by Randall Knives Lot #268 (Sale Order 268 of 333) Blade Length: 4 inches
Handle Length: 4 1/4 inches Blade Steel: 01 Carbon Tool Steel Guard and Pommel: Brass Handle Material: Hard Leather and Stag With Randall Leather Sheath APPRAISAL VALUE: $575 |
|
|
Made by Steve Johnson Lot #269 (Sale Order 269 of 333) Blade Length: 3 1/16 inches
Handle Length: 3 3/4 inches Blade Steel: ATS-34 Guard and Pins: Nickel Silver Handle Material: Sambar Stag With Leather Holster APPRAISAL VALUE: $3100 |
|
|
Made by Ricardo Romano Lot #270 (Sale Order 270 of 333) Blade Length: 3 3/4 inches
Handle Length: 4 5/8 inches Blade Steel: 440-C Guard and Pins: 416 Stainless Handle Material: Linen Micarta Please Note: Scratch on Mirrored Blade Includes Leather Sheath with Romano Stamp APPRAISAL VALUE: $600 |
|
|
Made by Randall Knives Lot #271 (Sale Order 271 of 333) Blade Length: 3 1/2 inches
Handle Length: 3 1/4 inches Blade Steel: 01 Carbon Tool Steel Guard and Pommel: Brass Handle Material: Hard Leather and Stag With Randall Leather Sheath and whetstone APPRAISAL VALUE: $600 |
|
|
Made by Steve Fecas Lot #272 (Sale Order 272 of 333) Blade Length: 4 1/16 inches
Handle Length: 4 1/2 inches Blade Steel: 440-C Guard and Pins: 416 Stainless Handle Material: Rosewood With Leather Sheath APPRAISAL VALUE: $575 |
|
|
Made by Corbit Sigman Lot #273 (Sale Order 273 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 3/4 inches Blade Steel: ATS-34 Guard: Nickel Silver Handle Material: Desert Ironwood APPRAISAL VALUE: $750 |
|
|
Made by Randall Knives Lot #274 (Sale Order 274 of 333) Blade Length: 4 1/16 inches
Handle Length: 4 1/4 inches Blade Steel: 01 Carbon Tool Steel Guard and Pommel: Brass Handle Material: Hard Leather and Stag Includes Leather Randall Sheath APPRAISAL VALUE: $600 |
|
|
Made by George Herron Lot #275 (Sale Order 275 of 333) Blade Length: 3 1/4 inches
Handle Length: 4 inches Blade Steel: 440-C Guard and Pins: 416 Stainless Handle Material: Ebony With Leather Sheath APPRAISAL VALUE: $1100 |
|
|
Made by Sid Birt Lot #276 (Sale Order 276 of 333) Blade Length: 4 inches
Handle Length: 4 1/2 inches Blade Steel: 440-C Guard: Nickel Silver Handle Material: Stag Engraved By: Valade, Scroll with Bead Punched Background With Black Hand Tooled Leather Sheath APPRAISAL VALUE: $800 |
|
|
Made by Randall Knives Lot #277 (Sale Order 277 of 333) Blade Length: 5 1/16 inches
Handle Length: 4 1/2 inches Blade Steel: 01 Carbon Tool Steel Guard and Pommel: Brass Handle Material: Hard Leather and Stag Includes Randall Sheath with whetstone APPRAISAL VALUE: $575 |
|
|
Made by Steve Johnson Lot #278 (Sale Order 278 of 333) Blade Length: 3 1/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pins: 416 Stainless Handle Material: Sambar Stag With Leather Sheath APPRAISAL VALUE: $3200 |
|
|
Made by Harold Corby Lot #279 (Sale Order 279 of 333) Blade Length: 4 3/4 inches
Handle Length: 4 7/8 inches Blade Steel: Unknown Guard and Pommel: Nickel Silver Handle Material: Honey Hornscales With Black Tooled Leather Sheath APPRAISAL VALUE: $600 |
|
|
Made by Henry Torres Lot #280 (Sale Order 280 of 333) Blade Length: 4 inches
Handle Length: 4 1/4 inches Blade Steel: Hammer Forged File Guard and Pommel: 416 Stainless Handle Material: Burled Walnut APPRAISAL VALUE: $1100 |
|
|
Made by Mike Mooney Lot #281 (Sale Order 281 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 1/2 inches Blade Steel: Damascus Guard: 416 Stainless Handle Material: Ebony and Burled Desert Ironwood With Hand-tooled leather sheath APPRAISAL VALUE: $700 |
|
|
Made by Steve Johnson Lot #282 (Sale Order 282 of 333) Blade Length: 3 5/8 inches
Handle Length: 4 1/4 inches Blade Steel: ATS-34 Guard and Pins: Nickel Silver Handle Material: Sambar Stag With Leather Sheath APPRAISAL VALUE: $3100 |
|
|
Made by Ruffin Johnson Lot #283 (Sale Order 283 of 333) Blade Length: 3 5/8 inches
Handle Length: 4 3/4 inches Blade Steel: 440-C Guard and Pommel: Brass Handle Material: Rosewood APPRAISAL VALUE: $550 |
|
|
Made by D'Alton Holder Lot #284 (Sale Order 284 of 333) Blade Length: 3 5/8 inches
Handle Length: 4 1/2 inches Blade Steel: 440-C Guard and Pommel: Nickel Silver Handle Material: Giraffe Bone, Linen Micarta and Synthetic Amber Please Note: This knife fits the sheath in lot #323 Appraisal Value: $1400 |
|
|
Made by Edmund Davidson Lot #285 (Sale Order 285 of 333) Blade Length: 5 7/8 inches
Handle Length: 5 inches Blade Steel: CPM 254-CM Guard and Pommel: CPM 254-CM Handle Material: Briarwood With Leather Sheath APPRAISAL VALUE: $1800 |
|
|
Made by Reinhart Tschager Lot #286 (Sale Order 286 of 333) Blade Length: 4 1/2 inches
Handle Length: 4 5/8 inches Blade Steel: ATS-34 Guard and Pommel: ATS-34, integral Handle Material: Rosewood with Rose Gold Pins Engraved By: Valerio Peli, Pierced and inlayed rose gold APPRAISAL VALUE: $2800 |
|
|
Made by Buster Warenski Lot #287 (Sale Order 287 of 333) Blade Length: 3 1/2 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pins: Nickel Silver Handle Material: Birds Eye Maple APPRAISAL VALUE: $1800 |
|
|
Made by Edmund Davidson Lot #288 (Sale Order 288 of 333) Blade Length: 3 3/4 inches
Handle Length: 4 1/2 inches Blade Steel: CPM 154-CM Guard and Pommel: 154-CM, integral Handle Material: Briarwood With Leather Sheath Loveless Design APPRAISAL VALUE: $3000 |
|
|
Made by Bill Behkne Lot #289 (Sale Order 289 of 333) Blade Length: 5 3/4 inches
Handle Length: 5 inches Blade Steel: Damascus Guard and Pommel: ATS-34 Handle Material: Burlwood With Leather Sheath Stamped Behnke Knives APPRAISAL VALUE: $500 |
|
|
Made by D'Alton Holder Lot #290 (Sale Order 290 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 1/4 inches Blade Steel: 440-C Guard and Pommel: Nickel Silver Handle Material: Dyed Birds Eye Maple, Ebony and Synthetic Amber Engraved By: Bruce Christensen, Relieved Scroll APPRAISAL VALUE: $1575 |
|
|
Made by L.C. Maxfield Lot #291 (Sale Order 291 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 5/8 inches Blade Steel: 154-CM Guard and Pommel: 416 Stainless Handle Material: Maple and Rosewood With Leather Sheath Stamped Maxwell APPRAISAL VALUE: $600 |
|
|
Made by Ruffin Johnson Lot #292 (Sale Order 292 of 333) Blade Length: 5 inches
Handle Length: 5 1/2 inches Blade Steel: 440-C Guard and Pommel: 440-C Handle Material: Rosewood and Synthetic Amber APPRAISAL VALUE: $800 |
|
|
Made by Mike Mooney Lot #293 (Sale Order 293 of 333) Blade Length: 4 1/4 inches
Handle Length: 4 1/2 inches Blade Steel: Damascus Guard: 416 Stainless Handle Material: Giraffe Bone and Purple Heartwood Includes Hand-tooled Leather Sheath APPRAISAL VALUE: $700 |
|
|
Made by Bob Loveless Lot #294 (Sale Order 294 of 333) Blade Length: 3 3/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pins: 416 Stainless Handle Material: Linen Micarta Includes Leather Holster, Stamped and signed by Bob Loveless! APPRAISAL VALUE: $5100 |
|
|
Made by Bob Loveless Lot #295 (Sale Order 295 of 333) Blade Length: 3 3/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pins: 416 Stainless Handle Material: Burled Desert Ironwood With Leather Sheath, Stamped and Signed by Bob Loveless! APPRAISAL VALUE: $5000 |
|
|
Made by Robert Lay Lot #296 (Sale Order 296 of 333) Blade Length: 5 1/2 inches
Handle Length: 4 1/4 inches Blade Steel: 440-C Guard: Brass Pommel: 416 Stainless Handle Material: Dyed Maple and Sambar Stag With Leather Sheath APPRAISAL VALUE: $500 |
|
|
Made by Bob Dozier Lot #297 (Sale Order 297 of 333) Blade Length: 3 1/2 inches
Handle Length: 4 1/2 inches Blade Steel: 440-C Guard and Pins: 416 Stainless Handle Material: Linen Micarta With Leather Sheath APPRAISAL VALUE: $900 |
|
|
Made by Steve Hoel Lot #298 (Sale Order 298 of 333) Blade Length: 7 3/4 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pommel: 416 Stainless Handle Material: Green Apple Jade Engraved By: Lynton McKenzie, Raised and relieved 24K inlays with flush inlayed borders APPRAISAL VALUE: $14,200.00 |
|
|
Made by Dennis Friedly Lot #299 (Sale Order 299 of 333) Blade Length: 3 3/8 inches
Handle Length: 4 3/4 inches Blade Steel: 440-C Guard and Pommel: 416 Stainless Handle Material: Sambar Engraved By: Bruce Shaw, Relieved scroll and relieved and carved scene With Leather Sheath APPRAISAL VALUE: $1400 |
|
|
Made by D'Alton Holder Lot #300 (Sale Order 300 of 333) Blade Length: 3 1/4 inches
Handle Length: 4 1/4 inches Blade Steel: 440-C Guard and Pommel: Nickel Silver Handle Material: Briarwood With Leather Sheath APPRAISAL VALUE: $850 |
|
|
Made by Corbit Sigman Lot #301 (Sale Order 301 of 333) Blade Length: 4 1/2 inches
Handle Length: 4 5/8 inches Blade Steel: ATS-34 Guard and Pommel: Nickel Silver Handle Material: Tiger Maple APPRAISAL VALUE: $700 |
|
|
Made by Harumi Hirayama Lot #302 (Sale Order 302 of 333) Blade Length: 2 1/4 inches
Handle Length: 3 1/4 inches Blade Steel: ATS-34 Guard: Nickel Silver Handle Material: Buffalo Horn inlayed with shell and 18K APPRAISAL VALUE: $3800 |
|
|
Made by Steve Johnson and Charley Bennica Lot #303 (Sale Order 303 of 333) Blade Length: 4 1/6 inches
Handle Length: 4 1/4 inches Blade Steel: ATS-34 Guard and Pommel: 416 Stainless Handle Material: Dyed Maple With Leather Sheath APPRAISAL VALUE: $5200 |
|
|
Made by Ruffin Johnson Lot #304 (Sale Order 304 of 333) Blade Length: 4 3/8 inches
Handle Length: 4 1/2 inches Blade Steel: 440-C Guard and Pommel: 416 Stainless Handle Material: Rosewood APPRAISAL VALUE: $550 |
|
|
Made by Thad Buchanan Lot #305 (Sale Order 305 of 333) Blade Length: 4 inches
Handle Length: 4 3/8 inches Blade Steel: 440-C Guard: 416 Stainless Handle Material: Briarwood With Leather Sheath APPRAISAL VALUE: $750 |
|
|
Made by Randall Knives Lot #306 (Sale Order 306 of 333) Blade Length: 3 1/2 inches
Handle Length: 3 3/8 inches Blade Steel: 01 Carbon Tool Steel Guard: Brass Pommel: 416 Stainless Handle Material: Linen Micarta APPRAISAL VALUE: $550 |
|
|
Made by Ted Dowell Lot #307 (Sale Order 307 of 333) Blade Length: 4 1/2 inches
Handle Length: 4 3/4 inches Blade Steel: CPM 154-CM Guard and Pommel: 154-CM Handle Material: Linen Micarta With Leather Sheath stamped TMD APPRAISAL VALUE: $1600 |
|
|
Made by G. Hindmarch Lot #308 (Sale Order 308 of 333) Blade Length: 4 inches
Handle Length: 5 inches Blade Steel: 440-C Guard and Pins: 416 Stainless Handle Material: Green Burled Maple Engraved By: Vladimar Vancura, Line cut with bead punched background APPRAISAL VALUE: $750 |
|
|
Made by D'Alton Holder Lot #309 (Sale Order 309 of 333) Blade Length: 5 1/2 inches
Handle Length: 4 1/2 inches Blade Steel: 440-C Guard and Pommel: Nickel Silver Handle Material: Burled Maple, Dyed Maple and Synthetic Amber Engraved By: Bruce Shaw, Relieved Scroll APPRAISAL VALUE: $1600 |
|
|
Made by Rob Hudson Lot #310 (Sale Order 310 of 333) Blade Length: 4 1/2 inches
Handle Length: 4 1/4 inches Blade Steel: 440-C Guard and Pommel: 416 Stainless Handle Material: Dyed Birdsyeye Maple APPRAISAL VALUE: $550 |
|
|
Made by Corbit Sigman Lot #311 (Sale Order 311 of 333) Blade Length: 5 inches
Handle Length: 4 1/2 inches Blade Steel: ATS-34 Guard and Pommel: Nickel Silver Handle Material: Rosewood With Handtooled Leather Sheath |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #312 (Sale Order 312 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #313 (Sale Order 313 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #314 (Sale Order 314 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #315 (Sale Order 315 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #316 (Sale Order 316 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #317 (Sale Order 317 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Heartwood Black Ebony Knife Box with Lock and Key Lot #318 (Sale Order 318 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Custom Made Hearwtood Black Ebony Knife Box with Lock and Key Lot #319 (Sale Order 319 of 333) Dimensions are 16 inches wide x 8 1/8 inches deep x 6 inches tall
with 4 - 15" x 7 1/8 drawers (includes Handle) each drawer contains 8 sections that are 5 1/4 inches x 1 3/4 inches |
|
|
Tooled Leather Knife Holster Lot #320 (Sale Order 320 of 333) 7 3/4 inches long x 3 inches
Blade Pocket is 6 inches x 2 1/4 inches |
|
|
Hand Tooled Leather Knife Holster Lot #321 (Sale Order 321 of 333) Stamped HR 4
|
|
|
Tooled Leather Knife Holster Lot #322 (Sale Order 322 of 333) Stamped HR #1
|
|
|
Tooled Leather Knife Holster Lot #323 (Sale Order 323 of 333) Fits Lot #284
Stamped D'Holder |
|
|
Tooled Leather Knife Holster Lot #324 (Sale Order 324 of 333) some wear on snap
|
|
|
Tooled Leather Knife Holster Lot #325 (Sale Order 325 of 333) See Photos for dimensions
|
|
|
Tooled Leather Knife Holster Lot #326 (Sale Order 326 of 333) See photos for dimensions
|
|
|
Tooled Leather Knife Holster Lot #327 (Sale Order 327 of 333) by D. E. Friedly, Cody Wyo
|
|
|
Tooled Leather Knife Holster Lot #328 (Sale Order 328 of 333) Made by Rowe's Leather
|
|
|
Tooled Leather Knife Holster Lot #329 (Sale Order 329 of 333) Custom made by Barnett
|
|
|
Handmade Leather Knife Sheath by RW Loveless Lot #330 (Sale Order 330 of 333) Stamped RW Loveless
|
|
|
2 Handmade Leather Knife Sheaths Lot #331 (Sale Order 331 of 333) No Makers marks
|
|
|
3 Handmade Leather Knife Sheaths Lot #332 (Sale Order 332 of 333) No Makers Marks
|
|
|
2 Handmade Leather Knife Sheaths Lot #333 (Sale Order 333 of 333) Smaller Seath is stamped SCHRAP
|
|