Heavy Construction Equipment > Blackmon Auctions > Sand / Screening / Washing Plant Liquidation
Sand / Screening / Washing Plant Liquidation
by Blackmon Auctions
Event Begins: Monday, March 17, 10:08 AM Central
First lots ends Friday, March 21, 10:00 AM Central
Last lot ends Friday, March 21, 11:06 AM Central
March 21, 2025 -
Online Only – First Item begins closing at 10AM
Shut down several years ago, this was a fully functional Sand Screening, Drying, Separating & Loading operation. *Note that buyers are responsible for rigging down, loading and transportation. No assistance will be provided. Bidding in this auction implies you agree to all terms including those set forth in the Terminal Access agreement (See document link below) which details the requirements to be on and operate on that yard – for inspection, load out etc.
SITE ACCESS REQUIREMENTS
Lot #0.11 (Sale Order 1 of 67)
URGENT A copy of this document must be printed and signed and sent back in order to access the facility for inspection AND your load out and rig down of your items. Do not bid on any items unless you are willing and able to execute this document. If you arrive onsite with prior approval of the terms in the TAA you will not be allowed on the property until you or a contractor that can and does meet these requirements execute the document. This is to ensure the safety of all involved, both persons and equipment. Please fill out, sign and email it and copies of the insurance required to billy@blackmonauctions.com and doug@blackmonauctions.com and ftaylor@bruceoakley.com. You can even send this documentation in advance of the auction/inspection to be sure. TAA for Auction Buyer.pdf
STARTING BIDS
Lot #0.14 (Sale Order 2 of 67)
These “starting bids” are here only to expedite your bidding experience and save your valuable time! They are not implying a value, just getting us started!
Auction Note:
Lot #0.01 (Sale Order 3 of 67)
Fully functional Sand Screening, Drying, Separating & Loading operation. In operation until a few years ago. Note that buyers are responsible for removal, loading, rigging down and transportation. No assistance will be provided.
Location:
Lot #0.02 (Sale Order 4 of 67)
1470 North Main, Mount Pleasant, Arkansas This location is south off Highway 69 about mile. Mt. Pleasant is about 20 miles northwest of Batesville, Arkansas. *GPS coordinates are (35.971977846142664, -91.77909255593602) for the exact location.
Type Auction -
Lot #0.03 (Sale Order 5 of 67)
Public Online Auction. This will be an online only auction. Early Bidding & Maximum Bidding will be available beginning several days before the auction. Bidding will begin a few days before the auction. You can pre-bid throughout the process. You can also enter a maximum bid and Proxibid automated system will bid for you along the bid increments. You can bid during the closing of the auction as well. If a bid is submitted within the last minute of bidding a 60+ second extension will be added.
Buyers Premium:
Lot #0.04 (Sale Order 6 of 67)
All Buyers, Both Onsite And Online, Will Be Charged A 10% buyer's premium on all purchases. An additional 4 % Will Be Charged For The Online Bidding Service Resulting In a Total Of 14 % Buyer's Premium.
Inspection
Lot #0.05 (Sale Order 7 of 67)
Buyers are encouraged to inspect items before bidding. Inspection at this yard is available the day before the auction where Blackmon staff may be onsite. To inspect early contact Billy at 501-352-4703 to see if there is availability.
Equipment Removal
Lot #0.06 (Sale Order 8 of 67)
Start planning even before you start bidding! Buyers are responsible for rigging down, loading and transportation of all items. No assistance will be provided. Please have all purchases removed within 60 days of the auction if possible. This property does not belong to Oakley nor Blackmon. Bring proof of insurance, send proper equipment and operators and trailers. Be considerate of property owner and all other buyers.
Shipping
Lot #0.07 (Sale Order 9 of 67)
Neither Blackmon Auctions nor the seller will package items for shipping or arrange shipment of items. Buyers are responsible for removing and transporting all purchases.
Condition of Equipment
Lot #0.08 (Sale Order 10 of 67)
All items are selling in the standard auction tradition, As Is, Where Is. The information we are supplying here is in no way to be considered perfect or as a promise or guarantee of functionality or specifications. Oakley & Blackmon put forth sincere efforts to gather info and provide pictures. You are welcome to do your own inspection or email a request for larger photos to billy@blackmonauctions.com.
Information
Lot #0.09 (Sale Order 11 of 67)
Blackmon Auctions is currently searching out potential rigging companies and maybe a scrap company that might take the parts of the lots you don't want. No promises but working on it.
EQUIPMENT LISTS
Lot #0.12 (Sale Order 12 of 67)
We have three ways for you to view this list of equipment. 1. Likely most helpful to print off prior to you visiting the location for inspection is to click just above this a few inches the little blue printer icon that reads in light blue Print Catalog. 2. A .pdf file if you click EQUIPMENT LISTS immediately above a window will open with the Oakley / Blackmon Custom Auction List - Also very helpful to print and see the logical flow of the auction. 3. This one is the only way to bid and see the most pictures, scroll down for the list, click specific items for MULTIPLE photos, see bidding buttons when bidding opens etc.
CRANE COMPANIES
Lot #0.13 (Sale Order 13 of 67)
As listed above, you are 100% responsible for rigging down and loading your items. Do it yourself if you meet the requirements in the Terminal Access Agreement or make sure you use a qualified company that can. There are other good companies than this in the area but this one has been a family business for generations McConnell Heavy Hauling 501-690-6733. Joyce Crane is regional. There are others.
Feeder Hopper
Lot #2000 (Sale Order 14 of 67)
16 x 8 with impact Feed Conveyor 36 Belt - 136 long to discharge hood, includes supporting frame, 20 hp motor and heavy gear drive. - Superior Belt Conveyor from feed hopper to screen deck, truss frame, 60 long, 5 idlers, 30-3ply 330 belt, includes belt weigh system, includes supporting frame. - Trio Shaker Screen (triple deck) w/ supporting frame infrastructure. Screen deck is sitting ground beside feed hopper, triple deck screen, approx 20 x 64 screen decks, no screens currently in deck. - Remco SandMax 250 Crusher, Model SD-Sand 250-304-12, S#250-0810-132, Includes supporting frame.
Belt Conveyor
Lot #2002 (Sale Order 15 of 67)
channel frame, 32' long, 30" belt, gearbox drive and motor intact, includes supporting frame at drive end. Includes Cross Belt Electric Magnet suspended over belt, A47933 Model, 115 volt, 17.85 Amp.
Superior F30x60 PFTC-M Belt Conveyor,
Lot #2004 (Sale Order 16 of 67)
truss frame design, SN#46465, 58' long; PPI idlers; wing tail pulley; lagged head pulley; 30" belt; 3 ply 330; splice is vulcanized; drive intact; overall good/fair shape, includes supporting frame.
Belt Conveyor,
Lot #2006 (Sale Order 17 of 67)
From feeder hopper to phoenix, truss frame design, 24" belt; 92' long, 3 ply 330; 4" idlers; wing tail pulley; motor and gearbox in good shape; overall good/fair shape Belt Conveyor - North side of Phoenix Process Equipment going from Dewater Screens to Superior Belt Conveyor, BG 3 machine guard bottom, truss frame design, 76' long, 3 ply 330 belt, 24" belt
Phoenix Sand Classifying & Dewatering System selling as a group,
Lot #2008 (Sale Order 18 of 67)
Phoenix Sand Classifying & Dewatering System selling as a group - Information partially provided from secondary source and has not been 100% confirmed but can be used as a guide. Includes three level 40'tall open frame steel platforms, supporting infrastructure and stairwells. Phoenix 7x20 Sand Classifying Screen Model 7X20-SC1 Sand Classifying Screen S#0811629 - Single Deck Horizontal, Side Plate Apex Design, 3/8" THK Plate/Reinforced Mechanism Plate, Welded Stiffeners, Base coil spring with mounting, Support Frame for High Open Area XIF System, Rubber Lined Deck, Mechanism GH400 V-Belt Drives, Guards and Belts, Feedbox with 3/8" AR Liner, Screen assembled and tested, Drive Motor 20 HP - 1775 RPM, NEMA C, 480/360, Complete Spray System with (4) 2.5 " spray bars fitted with 3/4 Jet Nozzles, Inline 6"dia (4) way manifold system including (4) valves, 1.5 dia hoses, clamps and hardware, Direct Mounted on H-Frame X20SDH XIF Polyurethane Decking System, Opening size 0.5mm, Marked as #30 Single Deck Dewatering Screen & Shaker -South - Model 4'x10'-DS-1 Serial # 0811629, 4'X10' Single Deck Dewatering Screen, High Frequency Horizontal APEX Design, 3/8" plate, reinforced mechanism plate, Welded Vert Stiffeners, Base mounted for steel coil springs, Mounting Package - 40 de. Feed X 5 Deg, Inclined, Extreme Rubber lined deck and pipe bars, Mechanism - GH300 -.25-.26 Throw @ 1090 RPM, Total Load 20-23 HP Base mounted rubber springs, Polyurethane Surface Decking - 0.5 mm Vibrating Shaker - Tons Per Hour Brand -4'x 10'high frequency horizontal dewatering screen, includes sub-base H beam frame, underflow pan and discharge chute with abrasion wear liner. Phoenix Classifier with Process Cyclones. (2) Ground Level Steel Tanks under the dewatering & vibratory screens Process Pumps: Two (2) Centrifugal Slurry Pumps - Two (2) 6 x 8 -20. One (1) Centrifugal Horizontal Pump -8 x 16 -18. Various other pumps. Several Process/Sump Tanks of various sizes. Includes Hydrocyclones and Launders. Includes, piping, flow controls, valves, pressure meters, master control panels and related equipment/components within the LOT area. ncludes several pieces of electrical/panels/controls to be removed from adjacent buildings.
Phoenix model WX3.0G6 Belt Filter Press System
Lot #2010 (Sale Order 19 of 67)
w/ inline mixers and belts, includes all steel supporting elevated infrastructure, platforms and stairways. Belt Filter Press, Press Feed Pump, Belt Wash Water Pump, Belt Press Polymer Pump, NEMA Stainless electrical panel with PLC and VFDs. Includes Belt Press Floc Tank with Mixer, Support stand w/ shaft and motor.
Misc Pumps and Mixer Container
Lot #2012 (Sale Order 20 of 67)
Four (4) pumps: Schurco Slurry Pump Model 05006=E6-V29 Warman Horizontal Pump 15hp Dragon 8 x 6 x 14 Pump Dragon 4 x 3 x 13 Pump Mixers (drives and paddles) in Container Box Two (2) Nord DriveSystem Mixers Models 9042.1VF N210TC
Load Out Belt Conveyor,
Lot #2014 (Sale Order 21 of 67)
60 long, 36 wide, 5 inch idlers, belt and drive in good order, channel frame design, includes support structure. Truck Load Out Structure w/ platform- 17 W x 23 L x 18 high Channel frame, stairs, bar grating, lighting.
Water Treatment Shed with
Lot #2016 (Sale Order 22 of 67)
Shed with One (1)-1,650-gal tank 85"X74" Anionic Polymer Mix Tank with 16" lid. One (1) 1,650 gal tank 85"X74" Anionic Polymer Aging Tank with 16" Lid. Various Pumps in and outside of Building. Includes metal building, all steel construction = 20 x 33. One walk door and one roll up door. Three plastic liquid tanks by treatment shed - 6k gallons each. Stainless steel mixing tank with supporting pumps and piping. Model D-1650-75T Phoenix Atlas Copco GA 18 Air Dryer Shop Furnace Dragon pumps - 4x3x13 Wemco Pump - 2x2 Modelc Air Mixers
Radial Stacker Conveyor -
Lot #2018 (Sale Order 23 of 67)
Serial # 06261RS, 80 long, 30 belt; 5 idlers wing tail pulley; 3ply-330, truss frame design, both tires in bad shape; splice is vulcanized; motor and gearbox intact good condition; lagged head pulley
Feeder Hopper w/ feed conveyor,
Lot #2019 (Sale Order 24 of 67)
w/ feed conveyor, 8 x 14, Texas Crush System, Model 2009-10E, 16 channel frame feed conveyor under hopper, 36 belt, drive intact, includes elevated platform and support structure. Belt Conveyor 30 belt, 85 long, 3 ply belt, ppi idlers, model 9-30-8424-AA. Includes BeltWay belt scales model 100. Includes support legs. br/> Includes Square D electrical control panel in adjacent electrical shed.
Radial Stacker Conveyor -
Lot #2020 (Sale Order 25 of 67)
100 long, truss frame design, 4 idlers; 42 belt, 3 ply 330 splice is vulcanized. Drive is center driven; wing tail pulley.
Channel Frame Conveyor -
Lot #2022 (Sale Order 26 of 67)
40 long, 24 belt 3 ply 330; 4 idlers, and wing tail pulley; lagged head pulley; belt is mechanically spliced. Flacco fasteners. Motor and gear box intact. Overall good/fair shape.
Starkaire Fluid Bed Drying System
Lot #2024 (Sale Order 27 of 67)
"Starkaire Fluid Bed Drying System fluidized bed dryer. Hauck Manufacturing Beta Burner Model BBG2114E, Gas Series-Pilot Ignition. Twin City Fan and Blower Dryer Blower Radial Paddle 937, Size 23W12 Includes Dryer control panel in adjacent building.
Bucket Elevator Leg
Lot #2025 (Sale Order 28 of 67)
"approx 60 tall -24 x 48 casing, tail shaft = 2-3/8, manual take up, 5 10 sections w/ 6 boot section. Metal buckets w/ 14-3/4 x 7-1/4 seven bolt, 15 belt, spiral tail pulley, includes tower frame legs and elevated distribution/surge tank. Screw Conveyor 20 long, 24 auger feed auger, 15HP motor, Dodge TA5215H40 gear drive.
Rotex Mineral Separators / Cleaning System
Lot #2026 (Sale Order 29 of 67)
"with supporting infrastructure elevator legs, conveyor belts, platforms. Bucket Elevators 1 And 2, Two bucket elevators in Rotex screening building. 12x48 casing size. Two (2) Rotex Mineral Separators - Model MM3180-3 Separators SN#-41859/4 & SN#-41859/0, Elliptical-Gyrator screeners, LTS hangers. Four (4)Conveyors (1) 8 channel frame; 35 long; 24 head and tail pulley; head lagged; 5 idler; no belt; (2) 8 channel frame; 35 long; 5 idlers; head pulley lagged : wing tail pulley; no belt: (3) 8 channel frame; 45 long; 24 lagged head pulley and winged tail pulley; no belt; (4) 8 channel frame; 35 long; wing tail pulley; 24 wide ; head pulley lagged, no belt Includes remaining MCC controls and control room.
Ransome Manufacturing LP-Gas Vaporizer
Lot #2027 (Sale Order 30 of 67)
"Model RH 200 E, SN# R8482
Smico Screener
Lot #2029 (Sale Order 31 of 67)
"Seven deck capability. - Aprox 15 x 5 size decks.
Cardinal Above Ground Truck Scales
Lot #2030 (Sale Order 32 of 67)
90 long, Model 10090-EPR, 100-Ton Nom/Gross, 90 long scales, steel deck and rookie bars, SN# S0149350-A with Printer, Read Out, & exterior score board Indicator
Cardinal Above Ground Truck Scales
Lot #2032 (Sale Order 33 of 67)
90 long, Model 10090-EPR, 100-Ton Nom/Gross, 90 long scales, steel deck and rookie bars, SN#S0131148A with Printer, Read Out, & exterior score board Indicator
SCALE OFFICE -
Lot #2034 (Sale Order 34 of 67)
12x5- 5 scale office, Wood frame Tin exterior, Mini Split heat and air. Includes steel ramp access. The scale and tank control components are not included with the scale office.
EMTROL DUST SYSTEM BAG HOUSE
Lot #2035 (Sale Order 35 of 67)
"Dust system Includes Ducting and Plenum from screening operations. Serial # KOPEERS 2.0-04252
Two (2) Bucket Elevators Legs feeding four (4) Vertical Tanks
Lot #2036 (Sale Order 36 of 67)
"with complete tank distribution and truck loading system: Elevator Legs - Tall Leg = (approx. 130), Short leg = (approx. 115). Hayes and Stolz Manufacturing 15 belt width 14-3/8 x 7-1/4 - 7 bolt hole pattern-plastic buckets Leg Casing size = 48x24 3-7/8 head shaft size, 2-3/8 tail shaft size Short Leg Gearbox = TA6307H Dodge, 30 HP Motor Tall Leg Gearbox = TA7315H Dodge, 40 HP Motor Complete Distributer Four (4) Columbian TecTank Funnel Bottom Tanks 1311 Diameter, 677 Tall, Capacity 10,010 cuft Includes Drive Thru Stand Infrastructure. Three (3) Andco Acuator Divertors Model - 3106A 0.8IPS Four (4) Bindicator Boxes on Tanks, Monitor Technology Inc Brand Silo Monitoring Units Four (4) Knappco Presssure/Vacuum Tank Hatches on Tanks Two (2) Dust Collectors on top of Tanks Engineering Fabrication Models Four (4) Dual Directional Positioner DCL Truck loading spouts below each Tank cone. Includes additional valves, distribution piping, access ladders and platforms. Control Panels for Legs, Tanks, DCL Spouts, etc are located in the Scale Office and are included with the above equipment.
Hoop Building Arches and Canvas Cover Only -
Lot #2050 (Sale Order 37 of 67)
"64 wide and 194 long, includes end walls and side entrance drive thru door. Arches and Canvas to be removed by Buyer.
Unused Three Sections of Arches
Lot #2051 (Sale Order 38 of 67)
originally intended for existing Hoop Building but never used, includes canvas cover, total section size would cover a 40 x 164 span.
LOT OF 9 SECTIONS OF CHANNEL FRAME CONVEYOR, 24
Lot #2052 (Sale Order 39 of 67)
Includes head and tail sections, 40 foot sections, 5 idlers, 6 channel frame, With weather hoods.
SHOP BUILT HOPPER ON LEGS
Lot #2056 (Sale Order 40 of 67)
109 x 10 9 hopper opening x 8 tall
CHANNEL FRAME CONVEYOR SECTIONS WITH HEAD AND TAIL SECTIONS
Lot #2058 (Sale Order 41 of 67)
"Assigned To: East Side Of Hoop Building - 2 sections - 40 foot - 1 section with head pulley and drive - 22 ft
Pallet of conveyor hoods
Lot #2060 (Sale Order 42 of 67)
" included in lot.
CONVEYOR TRUSS WITH CATWALK DESIGNED WITH TRIPPER 24"
Lot #2062 (Sale Order 43 of 67)
"Two (2) 38 sections - Three (3) 40 sections - All sections have 3 Catwalk on one side. - Includes: Head Section w/full drive assembly w/ scraper, Tail Section and take up weight box. - Includes Adams Tripper Stainless Steel model GT-24-162
MISC ELEVATED CONVEYOR SUPPORT STRUCTURES and PLATFORM TOWERS.
Lot #2064 (Sale Order 44 of 67)
West side of hoop building. Some towers are still located inside hoop building including two A-Frame legs that will need taken down. Various A-frame and strait frame ranging from 24 to 32 tall. 5 and 4 tubing design. Tower Platform 8 x8 x 24 5 tubing. A-Frame legs in hoop building 5 tubing
Y-Valve Actuator
Lot #2067 (Sale Order 45 of 67)
Y-Valve Actuator
FOUR (4) ROLLS OF BELTING FOR CONVEYORS
Lot #2068 (Sale Order 46 of 67)
"3 ply, 24 belt - Roll lengths = approx 225, 403, 432 and 340
Various Pumps:
Lot #2070 (Sale Order 47 of 67)
One (1) Gallagher Vertical Sump Pump, Model 4SR35100, S#97G17640 - One (1) Morris/Gould Pump 6 x 6 x 12 - One (1) unkown
Electrical Disconnects
Lot #2073 (Sale Order 48 of 67)
Electrical Disconnects
Electric Motor and Motor with Gearbox
Lot #2074 (Sale Order 49 of 67)
"200hp Baldor electric motor - electric motor and gearbox unknown
.jpg)
.jpg)
