The US Cavalry was mainly used as a raiding and screening force early in the Civil War, and was often humbled by General J.E.B. Stuart's superb Confederate horsemen. When General Ulysses S. Grant assumed control of all Union armies in March 1864, he immediately sought to improve his mounted forces, and placed General Philip Sheridan at the helm. Though not a veteran "horse soldier", Sheridan possessed two ideal traits for a cavalryman, a slight, wiry build and a bold, fiery spirit. Under his command, the US Cavalry evolved into a hard hitting strike force, capable of spearheading large attacks, and eventually cornering Lee and his army at Appomattox. Union cavaliers in the Civil War were issued leather carbine “sockets”, also called “thimbles”, which were buckled through a “D” ring on the right hand saddle skirt, allowing the trooper's slung carbine barrel to rest securely in the socket, and preventing that barrel from clanging against the horse and bouncing around while the rider was mounted. Many of those sockets were made by George Peters of Newark, New Jersey, who held a wartime contract for cavalry accoutrements. This US Army Civil War Cavalry “G. PETERS” Marked Leather Carbine Socket is in Good Condition, with moderate drying, surface cracking, and surface flaking to the outside strap, and with some overall drying, stiffening, crazing, and age wear evident. Most interestingly, it’s stamped on the end tip of the outside strap with its maker, “G. PETERS”, boasts the original black enameled steel closure buckle on that outside leather strap, and measures 2 1/2” long x 2 1/2” in diameter. A fine example of a very rare, original US Army Civil War Cavalry “G. PETERS” Marked Leather Carbine Socket. Lastly, this carbine socket comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

US Army cavalrymen out on the Plains in the Indian Wars were issued the Trapdoor Springfield carbine, as its shorter, lighter design made it easier to fire on horseback. The carbine was housed and attached to the saddle in the specially designed M-1887 "boot" scabbard, which featured a brass plate fixed to the front throat for reinforcement, and was longer than previous models for better stability. This US Army Indian Wars Cavalry Trapdoor Springfield Carbine M-1887 Leather "Boot" Scabbard is in Good Condition, with the maker’s mark having faded away long ago, and with moderate overall drying, stiffening, crazing, scuffing, surface cracking, and age wear evident. Most interestingly, it boasts the classic brass reinforcing plate at the front throat, sports the original leather cross straps with black enameled steel closure buckles, and features the original leather vertical suspension strap riveted to the upper back. It’s stamped with the inspector initials “F.A.H.” at the bottom front edge of the body, and is a fine example of a rare, original US Army Indian Wars Cavalry Trapdoor Springfield Carbine M-1887 Leather "Boot" Scabbard. Lastly, this boot scabbard comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

Make: Harpers Ferry

Model: 1841

Serial: None

Year of Manufacture: 1851

Caliber: .58 Caliber

Action Type: Single Shot, Percussion Cap

Barrel Length: 33 inches

Markings: The lock plate is marked "HARPERS FERRY 1851" with an American eagle and "US."

Sights / Optics: The front sight is missing. The rear sight is a replacement V-notch mounted near the chamber.

Stock Configuration & Condition: The wood stock shows heavy use with visible handling marks, scuffs, and scratches. There is a section of the stock missing from behind the hammer and a large dent or chunk missing behind the tang. A repair is present under the forearm, and a section near the front quarter on the right side is also missing. The stock retains its original profile but exhibits significant wear from age and use.

Fittings: The brass fittings, including a patch box on the right side of the buttstock, have been cleaned and polished. The front sling loop and the brass front leaf spring retainer have been replaced. A steel ramrod is included.

Finish: The barrel and steel parts exhibit speckling with erosion and corrosion.

Bore Condition: The bore is dark with scattered corrosion. In this writer’s opinion, the bore rates 6/10.

Overall Condition: This musket shows significant signs of age and wear. The finish is heavily eroded, with corrosion across most steel components. The brass fittings have been polished, and there are several replaced parts, including the front sling loop, brass front leaf spring cap retainer, and the rear sight. Despite its wear, the musket remains a fascinating piece of history.

Mechanics: The action functions correctly. We did not fire this musket. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None

Our Assessment: This Harpers Ferry 1841 musket is a fascinating piece of American history, produced during a time of significant military and industrial development. Marked "HARPERS FERRY 1851" on the lock plate, it features an American eagle and "US," denoting its government-issued origins.

While this musket shows heavy wear, with a dark bore, erosion, and corrosion throughout, it retains a strong historical presence. The brass fittings, including the patch box, have been polished, and several parts, including the front sling loop and rear sight, have been replaced. The stock shows extensive wear, with a section missing behind the hammer and a large dent or chunk missing behind the tang, in addition to other repairs and missing sections.

For collectors of antique firearms, Civil War-era weaponry, or U.S. military history, this musket is an intriguing piece. Though it shows its age, it offers an excellent opportunity for restoration, display, or study, highlighting the craftsmanship and utility of early American arms manufacturing. So bid high and bid firm. Please take a look at the condition of the rifle in our high-quality photos. Good luck with your bid.

Make: Spencer Repeating Rifle Company

Model: 1865 Rifle

Serial Number: 2401

Year of Manufacture: 1863-1866

Caliber: .50 Springfield Carbine (.56-50 Spencer Rimfire)

Action Type: Lever Operated Repeating Rifle Fed By Tubular Magazine (not present)

Barrel Length: 30""

Sights / Optics: The front sight is a blade fixed to a slotted base fixed to the front of the barrel. The rear sight is a folding ladder sight. There is a ""V"" notch in the bottom of the sight for use when the ladder is folded down. When the ladder is raised, there is a ""U"" notch at the bottom of the ladder marked ""2"", a ""V"" notch on the slider with the ladder graduated 3-8, and another in the top edge of the ladder marked ""9"".

Stock Configuration & Condition: The stocks are two piece smooth walnut. The forend has a nosecap and three spring-clip secured bands with a sling swivel on the middle band. The forend is secured with a screw at the bottom-rear. The buttstock has a straight grip, straight comb, sling swivel in the belly and a steel semi-crescent buttplate with a hole for a tubular buttstock magazine. No magazine is included with this listing. The stocks have some scattered nicks, dings, scuffs and scratches. The wood shows discoloration from age and oil. There are a few minor cracks around the edges. The LOP measures 13"" from the front of the trigger to the back of the buttplate. The buttplate has some scattered light surface oxidation and erosion, most notable at the heel. The stocks rate in about Fine overall condition as Antique.

Type of Finish: Blue & Case Color

Finish Originality: The finish appears Original to the parts, we believe that the barrel is not original to the receiver (see Our Assessment).

Bore Condition: The 6-groove rifled bore is bright, tending to gray at the muzzle. The rifling is sharp. There is some minor oxidation and erosion throughout. In this writer’s opinion the bore rates 6/10.

Overall Condition: This rifle retains about 10% of its metal finish. Most of the remaining finish is in the barrel which has scattered minor surface oxidation and some spots of light surface erosion. The exposed portions of the receiver are worn to white with some case color visible inside the receiver and on the portions of the lever/breech-block assembly which are concealed when the action is open. The receiver and lever/breech-block assembly have some scattered minor surface oxidation and infrequent minor erosion. There are some light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with serviceable slots. The markings are clear. Overall, this rifle rates in about Very Good condition as Antique.

Mechanics: No magazine included. This rifle was originally equipped with a Stabler Cutoff device, it has been removed and a fill-screw installed. Otherwise, the action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Christopher Miner Spencer, a leading figure of the machine tool industry, developed this action. The Spencer carbine was different from any other firearm of its time, a repeater using a metallic cartridge. By the end of the Civil War, more than 144,000 Spencer rifles and carbines had been manufactured. Spencer rifles and carbines met with high praise from those who were equipped with them, and with respect from those who faced them in battle. In its first combat test, Spencer-armed Union troops under the command of Colonel John Wilder earned the nickname ""Lightning Brigade"" when they defeated a numerically superior Confederate force at the Battle of Hoover’s Gap.

This is a Spencer Rifle with an M1865 marked barrel, differing from its Civil War predecessor by having a .50 caliber bore instead of the earlier .52 caliber. The barrel is for an M1865 Rifle, but the serial number on the receiver is not in the range for this model, indicating that the barrel has been installed on an earlier receiver. The receiver was at one time equipped with a Stabler Cut-Off device, but it has been removed. The bore is quite good considering both the rifle's age and that it would have exclusive use of black powder. The stocks are also in quite good shape for their age. Find a magazine for this guy and it’ll be a great repeater, if not then you have a nice single shot rifle on your hands. This is a nice find for collectors of Civil War-era and other early American cartridge rifles.

This is an original U.S. military 2-claw leather rifle sling from the Canfield Collection, dating from the Indian Wars through the Spanish-American War era (circa 1870s–1900). Designed for use with both the Springfield Trapdoor rifles and Krag–Jørgensen rifles, this pattern of sling features two brass claws for adjustable length and heavy russet leather construction. It saw widespread use by American infantry on the frontier and overseas during the nation’s late 19th-century conflicts. The leather remains pliable with moderate age cracking and wear, while the brass claws show a deep, untouched patina. Stitching remains strong and secure. Though unmarked, its design and wear are consistent with government-issue slings of the era. Measuring approximately 64 inches in length and 1¼ inches wide, this piece is ideal for pairing with an original service rifle or as a standalone collector’s item. Sourced from the well-known Canfield Collection, this is a fine, authentic example of a late 19th-century U.S. Army rifle sling—rich in history and essential for completing a proper Indian Wars or Span-Am rifle display.

This rare and original Frankford Arsenal wooden ammunition crate, dated April 21, 1881 (4-21-81), was designed to hold .45-70 cartridges for Trapdoor Springfield Rifles. With clear period markings, including “Caliber .45” and “Frankford Arsenal,” this crate is a true survivor of the Indian Wars era. Most of these crates were repurposed or destroyed, making well-preserved examples like this incredibly scarce. The wood retains its rich patina, and the stenciling remains visible, adding to its historical appeal.

For collectors of U.S. military artifacts and historical firearms memorabilia, this crate is a fantastic find. It serves as both a striking display piece and an authentic relic of the 19th-century U.S. Ordnance Department, embodying a time when these ammunition boxes played a critical role in arming frontier troops.

This rare Model 1876 cartridge belt with 1879 trial modifications represents a fascinating and highly collectible piece of U.S. military history. Designed as part of the Army’s effort to improve soldier equipment in the post-Civil War era, this belt features its distinctive varnished canvas construction with integral cartridge loops and a leather-reinforced tongue. The rare single hook bayonet scabbard, an experimental feature unique to these trials modifications, remains intact and accompanies an M1873 socket bayonet, completing this exceptional set. The belt’s aged but well-preserved condition showcases the craftsmanship and durability of the period, making it an outstanding addition for collectors of Indian Wars and frontier military gear.

Surviving examples of the 1879 trial-modified Prairie Belts are scarce, and even fewer retain their original single hook bayonet scabbard—a rare and short-lived feature in U.S. Army equipment history. The attached M1873 socket bayonet, designed for the Springfield Trapdoor rifle, pairs perfectly with the belt, further enhancing its historical significance. The belt’s rich patina, solid stitching, and well-preserved brass hardware all contribute to its authenticity and appeal. Whether as a museum-quality display piece or a highlight of an advanced militaria collection, this belt and bayonet set is a tangible connection to the evolving gear of the U.S. Army during the Indian Wars period.

Step back in time to the days of the U.S. Army's Indian Wars with this incredible early Hagner Number 2 leather ammunition pouch, a true relic of the late 19th century! Designed to carry .45-70 cartridges for the iconic Trapdoor Springfield rifles, this ruggedly constructed pouch was standard issue for frontier soldiers navigating the vast and untamed American West. Featuring the classic embossed "US" oval on the flap, sturdy brass hardware, and an interior lined with cartridge loops, this piece was built for durability and function in harsh conditions. The deep, rich patina on the leather, the verdigris on the rivets, and the wear from use all tell the story of a piece of equipment that saw real service in the hands of a soldier.

Adding to its authenticity and appeal, this pouch even includes a period-correct .45-70 round, a rare find that enhances its historical value! Whether you’re a collector of Indian Wars militaria, a historian, or simply someone who appreciates tangible pieces of American frontier history, this Hagner No. 2 pouch is a must-have. Its connection to the soldiers who carried it into battle and across the plains makes it an evocative piece of history that speaks of duty, hardship, and the expansion of a nation. Don’t miss the chance to own this remarkable artifact from a defining era in American military history!

This is a scarce and desirable Indian Wars-era Hagner No. 1 leather cartridge pouch, designed for use with the .50-70 Government cartridges issued for the Springfield Trapdoor rifles and carbines. This particular example comes from the Canfield Collection, known for its well-preserved and historically significant military artifacts. The pouch still retains a single .45-70 round, likely added during the late Indian Wars period when the U.S. military transitioned to the updated cartridge in the 1870s. The Hagner No. 1 was one of the earliest standardized cartridge pouches adopted following the Civil War, issued in the early 1870s as the Army transitioned from percussion muzzleloaders to breechloading rifles. This early pattern features the distinctive front flap secured by a brass finial, with leather belt loops on the reverse and original stitching throughout. Though designed for .50-70 ammunition, this example’s continued service into the .45-70 era reflects how slowly surplus equipment was phased out on the frontier. The leather remains supple and well cared for, showing an attractive aged patina. The pouch flap is clearly stamped with the “US” oval, and the construction remains solid with no tears or major cracking. It includes a single period-correct .45-70 cartridge nestled inside, offering a small but authentic touch of frontier soldier life. This is a fine example of early Indian Wars field gear, and one that rarely appears on the market in such complete condition. Whether you are a collector of U.S. military leather, frontier arms, or Indian Wars militaria, this Hagner No. 1 pouch from the Canfield Collection is a superb piece of 19th-century Army history.

US Army cavalrymen out on the Plains in the Indian Wars faced many dangers during their arduous campaigns. Those intrepid horsemen manned isolated forts along the trails out West, protected settlers, miners, and railroad crews from "hostiles", and brought renegade bands back onto the reservation. They were issued the classic M-1873 "Trapdoor" Springfield Carbine, and early on, before the advent of the widespread adoption of the Prairie belt or the introduction of the McKeever pouch, ammo for the Trapdoor Carbine was carried in the specially designed M-1874 Dyer ammo pouch. This US Army Indian Wars Cavalry Trapdoor Springfield Carbine M-1874 Dyer Leather Ammo Pouch is in Good Condition, with moderate overall drying, surface cracking, fragility, and age wear evident. Most interestingly, it bears the classic “US” oval embossed marking at front, sports a fully functional brass stud and brass escutcheon closure flap, and is stamped at the upper back with its maker, the famous “ROCK ISLAND / ARSENAL”. It features fully intact sewn and riveted belt loops at the reverse, exhibits a sheep’s wool lining to keep loose rounds from rattling, and is a fine example of a very rare, original US Army Indian Wars Cavalry Trapdoor Springfield Carbine M-1874 Dyer Leather Ammo Pouch. Lastly, this ammo pouch comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

US Army cavalrymen in the early days of the post-bellum Indian Wars were largely issued the Spencer and Sharps carbines before the M-1873 Trapdoor Springfield Carbine was introduced. Those early carbines used a specially designed leather shoulder sling, modeled after those of the Civil War, but scaled down to a more narrow width. Designed to support a cavalry carbine while on horseback, the long sling looped over the trooper’s shoulder and hooked to the saddle ring on his carbine. This US Army Indian Wars Cavalry "E.A. CROSSMAN" Marked Leather Carbine Sling is in Good Condition, with some overall drying, fragility, and age wear evident. Most interestingly, it boasts the classic post-Civil War “narrow width” design, sports a fully intact brass closure buckle and a thick steel snap hook to attach to the saddle ring on the carbine, and is stamped at the middle back with the oval logo of its maker, “E.A. CROSSMAN & Co. / NEWARK / -N.J.-”. E.A. Crossman & Co. was listed in the Newark directories as a harness maker during the 1860s, and the firm changed its name to E.A. Crossman Jr. in 1868, dating this piece to ca. 1866-1868. A fine example of a very rare, original US Army Indian Wars Cavalry "E.A. CROSSMAN" Marked Leather Carbine Sling. Lastly, this carbine sling comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This original U.S. Army M-1876 canvas prairie belt, designed for .45-70 Springfield Trapdoor cartridges, dates to the Indian Wars period and comes from the esteemed Canfield Collection. Issued in the late 1870s through the 1880s, it features 50 brass-reinforced cartridge loops, a “C” hook closure, and original brass hardware including the front adjustment buckle. Manufactured at Watervliet Arsenal, this belt was standard gear for troops on the Great Plains. The khaki-toned canvas shows honest service wear but remains strong and fully intact, with faint arsenal markings still visible—an iconic piece of frontier military history.

Own a true piece of frontier history with this original Indian Wars-era U.S. Army McKeever Cartridge Box, complete with an authentic .45-70 Government cartridge and Springfield Trapdoor combination tool! Issued to soldiers armed with the legendary Springfield Trapdoor rifle, this rugged black leather case features the bold “US” oval stamp, a proud emblem of military service on the American frontier. Inside, the canvas cartridge loops remain intact, designed to hold .45-70 rounds, just like the one included with this set! The brass hardware and latch are still functional, preserving the box’s historical integrity while offering a glimpse into the daily life of 19th-century U.S. soldiers.

Adding to its collector’s appeal, this set includes an original Springfield Trapdoor combination tool, an essential accessory used by soldiers for maintaining their rifles in the field. With the bonus of a genuine .45-70 round, this is a complete, museum-worthy set—ideal for collectors, reenactors, and enthusiasts of America’s Indian Wars era. Whether displayed in your collection or used as an authentic addition to your historical gear, this McKeever cartridge box, tool, and cartridge combo is an unbeatable find!

This lot includes five original U.S. Army single claw leather rifle slings from the Indian Wars period, suitable for use with Trapdoor Springfield rifles as well as Spencer and Sharps conversion carbines. These slings are constructed of thick russet leather and each features a single brass hook, typical of the post-Civil War U.S. military sling design prior to the adoption of the M1907 double claw pattern. The leather shows expected age with surface crazing, darkening, and some cracking, but several slings remain supple enough for display. Brass hardware shows a deep, aged patina. These slings are representative of the kind issued during the 1870s and 1880s as the U.S. Army transitioned into a modernized frontier force. They are a fitting addition for collectors of Indian Wars militaria or anyone looking to complete a period-correct display of Springfield, Spencer, or Sharps rifles and carbines.

This lot consists of four original U.S. Army cleaning rods designed for use with the M-1873 Trapdoor Springfield rifle, the standard infantry weapon throughout the Indian Wars era. Each rod is approximately 35 inches in length and features the correct slotted tip for patch cleaning, along with threaded ends to accommodate standard issue brushes and attachments. These steel rods were stored beneath the rifle barrel and were an essential part of field maintenance for soldiers on campaign in the post-Civil War American West. The rods exhibit uniform aging, with surface wear and a mild, even patina consistent with extended service use. Threads remain intact, and there are no signs of bending, cracking, or structural damage. These are 100% original military-issue components, not reproductions, and are well suited for display alongside Trapdoor rifles or as replacements for period-correct restorations. A fine example of late 19th-century U.S. Army gear, this grouping comes from the esteemed Canfield Collection and represents a valuable opportunity to acquire authentic accoutrements from one of the most iconic rifles in American military history.

Step into the frontier legacy with this US Navy Indian Wars-era Trapdoor Springfield M-1879 cartridge box, an authentic piece of American military history! Crafted by Hitchcock of St. Louis, this original leather cartridge box was designed to hold powerful .45-70 Government rounds—ammunition that fueled the iconic single-shot Trapdoor rifles of the late 19th century. What makes this example truly special is its military provenance, with clear “USN” (United States Navy) markings and a single original .45-70 round still tucked inside—an evocative reminder of the sailors and Marines who once carried these into battle or aboard ship.

The condition of the leather is a testament to its quality and resilience, with the box retaining a pleasing, aged patina that only comes with genuine use and time. The stitching remains strong, and the Hitchcock maker’s mark is still crisply visible on the inner flap, adding collectability and authentication. Whether you're a serious Indian Wars collector, a reenactor, or simply someone who values tangible links to America's martial past, this cartridge box offers a rare chance to own a functional and display-worthy artifact from the era when the Trapdoor Springfield ruled the ranks.

Union infantrymen in the Civil War, colloquially nicknamed ”Billy Yank”, were largely armed with the superb Springfield rifle musket. The Springfield was renowned for its accuracy and range, and mounted a well made socket bayonet for close quarters combat. Undoubtedly the most famous bayonet charge of the “War Between the States” was executed by Colonel Joshua Chamberlain and his 20th Maine, in what became known as “Chamberlain’s Charge” down Little Round Top on the second day of the pivotal Battle of Gettysburg in July 1863. This US Union Army Civil War M-1861 M-1863 Springfield M-1855 Socket Bayonet is in Very Good Condition, with some light overall cleaning, scratching, pitting, spot patina, and age wear evident. Most interestingly, it features an 18" bright trefoil blade that was factory left “in the white”, sports a fully functional locking ring at the mortise, and is "US" stamped with serifs at the ricasso, above the serifed inspector’s initial “S”. It’s complete with the original US Union Army Civil War Leather Scabbard in Good Condition, with heavy drying, surface cracking, and surface flaking to the body, and with moderate overall age wear evident. Most interestingly, it bears an integral “roughout” leather frog riveted at top, exhibits a brass reinforced end tip with a “ball” finial at bottom, and the set is a fine example of a rare, original US Union Army Civil War M-1861 M-1863 Springfield M-1855 Socket Bayonet. Lastly, this bayonet and scabbard come directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this set.

This is an original U.S. Union Army Model 1855 socket bayonet from the Civil War era, paired with a British leather sheath. The bayonet features the classic triangular blade design with an intact socket and locking ring, measuring approximately 18 inches in length. Designed for use with the .58 caliber Springfield rifles—including the Model 1855, 1861, and 1863—the M-1855 bayonet became a staple in Union infantry gear. This example shows a smooth, aged steel patina with light surface wear consistent with its period of use. The accompanying British scabbard adds character and historical intrigue. Leather is lightly worn but in Very Good condition, with brass throat and tip still present. Such combinations were not uncommon, especially in postwar or field-modified gear where practicality often overruled uniformity. This piece comes from the respected Canfield Collection and represents a fine example of a classic Civil War-era bayonet, suitable for any collector of 19th-century military arms and accoutrements.

Offered here is an original Model 1873 triangular socket bayonet for the Springfield Trapdoor rifle, paired with its original metal scabbard and a Navy-marked leather frog. This example comes from the esteemed Canfield Collection and is representative of the period of the Indian Wars, when the Springfield Trapdoor rifle was the primary service longarm of the U.S. military. The bayonet is unmarked, as is correct for many M1873 examples produced early in the Trapdoor era, featuring the distinctive triangular blade with crisp edges and a clean, full-length profile. The locking ring at the socket is intact and functional. The scabbard is the early second pattern with a blued finish and brass tip, showing honest wear from use but remaining structurally sound. This is an amazing piece of history and will be a perfect addition to any collection.

This is an original U.S. Springfield Model 1903 Rod Bayonet, a scarce and historically significant piece designed for the earliest configuration of the M1903 rifle, produced prior to the 1905 redesign. Manufactured at Springfield Armory, this blued steel bayonet features a needle-like design reflecting the influence of European military trends at the turn of the century. Rod bayonets were issued in extremely limited numbers before President Theodore Roosevelt personally intervened, calling the design "as poor an invention as I ever saw," leading to their rapid withdrawal and replacement with knife-type bayonets. As a result, surviving examples—especially in original, unmodified condition—are exceedingly rare. This particular bayonet has some light surface oxidation present but remains in Very Good condition. This is a must have item for collectors.

This original U.S. Army Model 1873 socket bayonet was designed for use with the Springfield Trapdoor rifle in .45-70 Government and dates to the Indian Wars era of the 1870s–1890s. It features an 18-inch triangular blade with a crisp "US" marking at the base and a functional locking ring at the socket. The steel blade has aged to a smooth plum-gray patina, and it comes complete with its original blued steel scabbard and a rare period leather frog. The scabbard shows some light surface oxidation but has no dents, while the leather frog remains supple with intact stitching—an uncommon survival due to field use and age. Issued to frontier infantry during campaigns in the American West, this bayonet represents a key piece of U.S. military history. Sourced from the respected Canfield Collection, this is a well-preserved and complete Indian Wars-era bayonet rig with strong appeal to collectors of 19th-century militaria.

Maker: N.P. Ames, Springfield, Massachusetts

Model: 1841 U.S. Naval Cutlass

Date: 1846

Blade Length: Approximately 21” (standard regulation length)

Overall Length: Approximately 26”

Markings:
The reverse ricasso of the blade is marked “N.P. AMES / SPRINGFIELD,” partially rubbed but still legible. The obverse side is marked at the ricasso with partially visible “USN” above a clearly stamped “1846” date. Below this is a faint but recognizable inspector’s stamp “R,” commonly encountered on other Model 1841 cutlasses but not specifically identified. The brass hilt shows clear inspector stamps: “R.C.” (Rufus Chandler, Navy Bureau of Ordnance inspector) on the reverse quillon disk and “J.L.” within an oval (Joseph Lanman, U.S. Navy inspector) on the obverse quillon disk. Both inspection marks feature a line of small check marks across them, typically found on surplus-disposed naval weapons. The cast eagle motifs on each side of the pommel remain distinct and sharp. The underside of the brass handguard is marked ""55 / 90"".

Blade Configuration & Condition:
This regulation double-edged blade features a central median ridge without fullers, characteristic of the M1841 naval pattern. The blade has a bluish-gray patina overall with thin, darker gray areas and exhibits some shallow, scattered pitting consistent with maritime use and age. The cutting edges show only minor nicks, nothing severe, and the blade retains a good, sharp point. Markings on the ricasso remain partially clear despite having been worn by periodic cleaning throughout its service life.

Hilt Configuration & Condition:
The brass guard and pommel have acquired an even, medium-aged patina. The guard design includes a reinforced knuckleguard extending downward into a wide, counterguard ending with a quillon terminating in a disk. The reverse disk is marked ""R.C."" and the obverse ""J.L."" in an oval, both clearly stamped. The pommel castings, featuring an eagle on both sides, show slight wear but retain clear outlines and definition. Overall, the hilt remains solid and attractive, reflecting genuine handling and use, with no damage or structural issues.

Historical Assessment:
The Ames Model 1841 U.S. Naval Cutlass is historically significant and notably scarce, with only 6,600 units produced between 1842-1846. The clearly stamped date ""1846"" places this cutlass within the batch of 1,200 produced on the September 21, 1844, contract and delivered by September 1845, or possibly among a smaller subsequent batch from July 1846. These cutlasses played active roles throughout the Mexican-American War (1846-1848), notably at Vera Cruz in 1847 and other naval actions along the Gulf Coast and in California. Afterward, they saw widespread naval service, including Commodore Perry’s expedition to China and Japan, and remained the standard-issue naval cutlass up to and into the early stages of the American Civil War.

These rugged naval blades, inspired partly by the U.S. Army’s earlier 1832/33 pattern short sword, proved versatile in shipboard combat and utility tasks, effectively cutting through boarding nets or handling rigging emergencies. Their historical use through multiple conflicts and their ongoing presence aboard U.S. Navy ships worldwide adds considerably to their desirability and collectible status.

This particular example is a very good representative piece of American naval history. It shows genuine use and careful handling, retains legible markings, inspector’s stamps, and distinct, attractive patina—exactly what collectors seek in authentic naval antiques. The ""55/90"" marking beneath the guard suggests a shipboard rack or inventory marking, adding another layer of historical intrigue. The clear 1846 dating, confirmed Ames maker marks, and documented inspector’s stamps provide strong provenance and historical integrity, making this Model 1841 Naval Cutlass an outstanding candidate for inclusion in any serious collection of American naval and edged weaponry.

Make: Springfield Armory

Model: 1873 Trapdoor

Serial#: 63174

Year of Manufacture: 1876 (Antique)

Caliber: .45-70 Government

Action Type: Single-Shot Trapdoor Breech-Loading Rifle

Markings: The lock plate is marked "US SPRINGFIELD". The rear of the receiver is marked "63174". The top of the trapdoor is marked "Model 1873" over an "eagle head" over "US". The chamber is marked "MASS". The buttplate is marked "US".

Barrel Length: 32 ?”

Sights / Optics: The front sight is a blade fixed to a rectangular base on the barrel. The rear sight is a leaf sight with stepped sight leaves, adjustable for elevation.

Stock Configuration & Condition / Grip: The stock is a one-piece walnut military-style stock with straight grip, showing scattered dings, scratches, and handling marks consistent with age and military use. The buttstock exhibits notable grain separation and striations starting at the heel, which does not affect the structural integrity or usefulness of the stock. A sling is installed. Overall, the stock rates in Good condition as Antique.

Type of Finish: In the White, developing patina throughout

Finish Originality: Original

Bore Condition: The bore is dark with visible rifling. There is mild erosion throughout. In this writer’s opinion, the bore rates 5/10.

Overall Condition: This rifle is essentially in the white with an even patina throughout. The metal surfaces exhibit scattered pitting and age-related wear, consistent with prolonged use and storage. The screwheads show moderate use with defined slots. All markings remain clear and legible. Overall, this rifle is in Good condition as Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box Paperwork and Accessories: The rifle includes an installed cleaning rod (ramrod) and a trowel-style bayonet housed in a leather frog. The frog carries a tag marked "Made in India". The bayonet and frog are modern reproductions and are in Very Good condition.

Our Assessment: This Springfield Model 1873 Trapdoor rifle, serial number 63174, was manufactured in 1876, a historically significant centennial year for the United States. Chambered in .45-70 Government, the Model 1873 Trapdoor rifle was extensively utilized during the Indian Wars era and became an iconic symbol of post-Civil War American military arms.

This particular rifle features Massachusetts militia ("MASS") markings, indicating a storied past. Its honest wear, patinated surfaces, and grain separation in the buttstock speak to genuine historical usage without compromising the stock's structural integrity. Complete with a reproduction trowel bayonet in a leather frog, it offers historical appeal to collectors and reenactors.

Make: Springfield Armory

Model: 1884 Trapdoor Rifle

Serial Number: 451990

Year of Manufacture: 1889, C&R

Caliber: .45-70 Government

Action Type: Single Shot, Trapdoor Action, Fed by Single Shot

Markings: The right side of the barrel near the breech is marked “V / P / Eagle Head / P.” The breechblock is marked “U.S. / MODEL / 1884.” The top of the buttplate is marked “U.S.” The top of the receiver is marked with the serial number “451990.”

Barrel Length: 22”

Sights / Optics: The front sight is a blade set in a base that doubles as a bayonet lug. The rear sight is a Buffington sight adjustable for windage and elevation, marked to 2,000 yards. The rear sight base is intact and secure.

Stock Configuration & Condition: The stock is a one-piece walnut military stock with a straight grip and metal buttplate. The LOP measures 13 3/8” from the front of the trigger to the back of the buttplate. The stock shows handling marks throughout with several scattered nicks, small gouges, and scratches. There is a crack around the top of the wrist. The stock rates in about Good overall condition.

Magazine Quantity & Condition: N/A – Single shot

Type of Finish: Blued with case-colored breechblock

Finish Originality: Original

Bore Condition: The bore is mostly bright, the rifling is defined. There is light visible erosion in the bore. In this writer’s opinion, the bore rates 7/10.

Overall Condition: This rifle retains about 50% of its metal finish. The balance of the finish shows general thinning and finish loss, with areas of patina developing along the barrel and receiver. There is light surface oxidation and some freckling, particularly on the buttplate and exposed metal parts. The breechblock retains strong case color. The screw heads are lightly tooled with serviceable slots. The pins are unmarred. The markings are mostly sharp and legible. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Springfield Model 1884 Trapdoor Rifle was the final iteration of the long-serving Trapdoor series used by the U.S. military from the late 1860s through the end of the 19th century. Featuring the improved Buffington rear sight and robust .45-70 Government chambering, these rifles saw service in the Indian Wars and into the Spanish-American War era as training and secondary arms.

This particular example, serial number 451990, dates to circa 1889 and retains solid mechanical function, clear markings, and a bright bore with strong rifling. Though showing wear consistent with age and service, it presents as a very honest, well-preserved military rifle.

For collectors of U.S. military arms, especially 19th-century martial rifles, this Springfield Trapdoor offers historical value, shooting potential, and an iconic design that bridges the black powder and early smokeless eras. A solid addition to any historical arms collection.

Make: Springfield Armory

Model: Model 1873 Trapdoor Carbine

Serial Number: 254357

Year of Manufacture: 1884 (Antique)

Caliber: .45-70 Government

Action Type: Trapdoor Breechblock, Single Shot

Markings: The serial number “254357” is located at the top of the receiver behind the breechblock. The breechblock is marked “U.S. / MODEL / 1873” as well. The barrel is marked with a “V / P / eaglehead” proof on the left side near the breech. The lockplate is marked “U.S. / SPRINGFIELD” with the eagle motif in between. The rear sight base is marked “C” for carbine. There are no visible cartouches on the left side of the stock due to wear. The buttplate tang is marked “U.S.” and the cleaning rod and trapdoor is intact.

Barrel Length: 22”

Sights / Optics: The front sight is a blade pinned in a base. The rear sight is a folding leaf sight marked “C” with a fixed “V” notch at the base and an elevator bar with additional notches for elevation.

Stock Configuration & Condition: The stock is a one-piece straight grip walnut carbine stock with a short forearm secured by a single barrel band. The LOP measures 13 1/8” from the front of the trigger to the back of the steel carbine buttplate. The stock shows handling marks throughout. There is mild wear around the lockplate and wrist. There is a crack on the right side of the wrist. The stock rates in about Good overall condition.

Magazine Quantity & Condition: Not applicable. This is a single shot rifle.

Type of Finish: Blued and Case Colored

Finish Originality: Original

Bore Condition: The bore is semi-bright, the rifling is mostly sharp. There is light scattered visible erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: This rifle retains about 20% of its metal finish. The balance of the finish shows thinning and wear from age and use. The case coloring on the breechblock has mostly faded to patina. There is general handling wear with scattered nicks, spots of oxidation, pitting throughout the barrel, and faint surface freckling. The screw heads are lightly tooled with serviceable slots. The pins are unmarred. The markings are mostly sharp and legible. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Springfield Model 1873 “Trapdoor” Carbine was the standard U.S. cavalry longarm from the Indian Wars through the mid-1880s. Its robust, simple trapdoor mechanism was an evolution from the Civil War-era Allin conversions, chambered in the powerful .45-70 Government cartridge. This particular example, made in 1884, represents the final years of this model before the adoption of the bolt-action Krag-Jørgensen.

This carbine retains many of the original features expected on cavalry-issue Trapdoors, including the 22” barrel, “C”-marked carbine rear sight, and buttplate with cleaning rod trap. The patina and wear are consistent with a field-used but well-preserved military weapon, and the sharpness of the bore is particularly impressive for a black powder-era gun. While the stock shows honest age and wear, the action is tight and the markings remain mostly clear.

Collectors of American military arms will appreciate this carbine for its historical value and its configuration as a true cavalry-issued example. Whether for historical reenactments, display, or a curated U.S. martial collection, this Springfield Model 1873 stands as an enduring piece of 19th-century American frontier and military history.

Make: Springfield Armory

Model: Model 1884 Carbine

Serial Number: 414349

Year of Manufacture: 1888 (C&R)

Caliber: .45-70 Government

Action Type: Lever-Action, Breech-Loading, Trapdoor

Markings: The top of the breechblock is marked “U.S. / MODEL / 1884.” The rear of the lockplate is marked with the federal eagle and “U.S. / SPRINGFIELD.” The left side of the barrel, near the breech, is marked with a “V / P / eaglehead” proof. The top of the receiver is marked with serial number “414349.” The buttplate tang is marked “U.S.”

Barrel Length: 22”

Sights / Optics: The front sight is a hooded blade pinned in a base. The rear sight is a Model 1884 Buffington sight adjustable for windage and elevation with a sliding aperture on a graduated ramp and a flip-up ladder. The ladder has elevation markings from 1 to 20. The base has a windage dial.

Stock Configuration & Condition: The stock is a single-piece walnut carbine stock with a straight wrist, single barrel band, sling bar and ring, and carbine-style buttplate with sliding trapdoor with a cleaning kit inside. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The stock shows light scattered compressions, nicks, scuffs, and scratches throughout. There are no visible cracks. The stock rates in about Very Good overall condition.

Magazine Quantity & Condition: N/A

Type of Finish: Blued barrel and case-hardened breechblock and lockplate

Finish Originality: Original

Bore Condition: The bore is mostly bright, the rifling is well defined. There is light visible erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: This rifle retains about 40% of its metal finish. The balance of the finish shows thinning throughout the barrel, gray patina on the breechblock, receiver, and lockplate, along with mild oxidation and light surface freckling. There is scattered handling wear and some scattered nicks and scuffs. The screw heads are lightly tooled with serviceable slots. The pins are clean. The markings are legible. Overall, this rifle rates in about Good to Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Springfield Model 1884 was the final and most refined version of the Trapdoor Springfield series, which served as the backbone of the U.S. military’s infantry armament following the Civil War until the adoption of the Krag-Jørgensen. This particular example is a true cavalry carbine variant, correctly fitted with the 22” barrel, single barrel band, and saddle ring bar, and it retains its Buffington rear sight, which was a notable upgrade in this model.

This carbine, serial number 414349, was manufactured in 1888 and remains in solid collectible condition with good bore quality, an intact cartouche, and strong mechanical function. With its short barrel and lighter configuration, the Model 1884 Carbine saw widespread use with U.S. cavalry units on the frontier during the Indian Wars period.

Whether you are a collector of Indian Wars-era firearms, a student of U.S. military history, or simply appreciate the elegant simplicity of 19th-century single-shot arms, this Springfield Trapdoor carbine offers both historical charm and practical preservation.

Make: Remington

Model: Model 1875 ""Mexican Contract""

Serial Number: 10727

Year of Manufacture: Circa 1875-1889

Caliber: .45 Colt

Action Type: Single Action Revolver with a Six-Shot Cylinder

Markings: The revolver bears Mexican military acceptance markings, including the “R de M” stamp on the right front of the frame, which signifies Republica de México (Republic of Mexico). Additional marks include an inventory number and the Mexican Liberty Cap emblem on top of the barrel. These markings indicate this revolver was part of a contract order from the Mexican government.

Barrel Length: 7.5” (Rare for a Mexican Contract, as many were cut down during service use)

Sights / Optics: The front sight is a pinched fixed blade, and the rear sight is a groove milled into the top strap.

Grip Configuration & Condition: The grips are smooth walnut, period-correct. They exhibit handling wear, small dings, and minor age-related marks, rating in Very Good condition given the revolver’s military service history.

Cylinder Condition: The cylinder shows expected handling wear, light oxidation, and faint traces of the original finish. The chambers appear clean, and the ""R de M"" stamp is present on the cylinder, as was common with these Mexican contract revolvers.

Type of Finish: Blued (now mostly aged to a White patina)

Finish Originality: Original

Bore Condition: The bore is semi-bright with visible rifling, showing light pitting but remaining shootable. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains a strong historical presence, with much of its original finish aged to a natural patina. The markings remain clear, and the frame, barrel, and cylinder all exhibit period-correct wear expected of a military contract firearm that saw field use. The screw heads are serviceable, and the mechanics remain sound. Overall, this revolver rates in Very Good condition considering its history.

Mechanics: The action functions correctly. The hammer locks back firmly, and the cylinder rotates properly with good lockup. The timing is solid, and the trigger remains crisp. We did not fire this revolver. As with all antique firearms, a thorough inspection by a qualified gunsmith is recommended before use.

Box, Paperwork & Accessories: None.

Our Assessment:
The Remington Model 1875 was the company’s attempt to compete with Colt’s Single Action Army, offering a rugged and reliable single-action revolver chambered in powerful calibers like .45 Colt and .44 Remington. Though less commercially successful than the Colt SAA, the Remington 1875 found favor with several foreign militaries, including Mexico.

This revolver is a Mexican Government Contract Model, as evidenced by the ""R de M"" (Republica de México) stamp, Mexican Liberty Cap, and inventory numbers. These revolvers were issued to the Mexican military and law enforcement, often seeing heavy service in conflicts and border skirmishes. Most Mexican Contract 1875s had their barrels shortened during service, making this original 7.5” barrel example an exceptionally rare find.

For collectors of Old West, military, or Remington firearms, this revolver represents an authentic, historic piece with undeniable provenance. The Mexican Contract 1875s are highly sought after, and examples with original-length barrels and clear markings are exceedingly scarce.

Whether for display, collection, or historical study, this Remington Model 1875 Mexican Contract Revolver is a true piece of 19th-century military history that would enhance any antique firearm collection.

After the United States’ victory in the Spanish-American War, the US gained Guam, Cuba, Puerto Rico, and the Philippines as territories, and the US Army faced a grueling 15 year campaign to quell uprisings in the Philippine Islands from 1899-1913. This Antique 1900s Philippine Insurrection Native Warrior Bolo Sword is in Good Condition, with some rounding to the blade tip, two chips in the upper blade edge, some sharpening and scattered nicking to the blade edge, some cleaning, scratching, pitting, and patina at each side of the blade, moderate patina to the guard, ferrule, and pommel, a deep vertical crack running the length of the inner left side of the handle, and with some overall age wear evident. Most interestingly, it features a once bright 20 3/4” slightly upswept drop point blade, sports a well figured steel “S” guard, with the bottom end curving down nicely to protect the user’s hand, and boasts an elegant greenish brown hardwood handle. It bears a darkened brass ferrule and pommel, exhibits an old inventory tag hand marked “War Bolo / Luzon 1900” still tied around the upper handle, and is a fine example of a rare, original Antique 1900s Philippine Insurrection Native Warrior Bolo Sword. No scabbard included. Lastly, this bolo sword comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This is 2 six pocket bandoleers and 90 factory rounds. Manufactured at Frankford Arsenal in 1906. Marked “60 Ball Cartridges, Cal. .30 / Model of 1898 / Frankford Arsenal” across three of the pockets. Stamped on a fourth pocket is “RIFLE VELOCITY/ At 53 Feet, / 1974 Feet / April 3, 1906”. The cartridges are headstamped “F A  3 06” and are in Very Good condition. The 2 bandoleers are in Good condition with some age soiling, legible printing and missing the carrying straps.

This is an original U.S. Army .30-40 Krag cartridge belt manufactured by Mills & Orndorff during the Spanish-American War period, circa 1898. Made of dark blue woven webbing, the belt features 45 cartridge loops designed to hold .30-40 Krag rifle ammunition. It is fitted with the distinctive brass "C"-clasp buckle and end tabs, which bear the Mills-Orndorff markings along with patent dates faintly visible on the hardware. The blue coloration identifies it as an infantry issue belt. These woven cartridge belts represented a significant improvement over traditional leather gear, offering greater durability and lighter weight. Issued to U.S. troops serving in Cuba, Puerto Rico, and the Philippines during the Spanish-American War, belts like this were paired with the Krag–Jørgensen rifle, the standard U.S. service rifle at the time. This example shows light wear consistent with age but remains in strong, complete condition with no major fraying. A fine and increasingly scarce piece of American military history from the turn of the 20th century.

Step into the pages of American military history with this original U.S. Army Spanish-American War Cartridge Belt, designed to carry the powerful .30-40 Krag cartridges that armed our troops during a pivotal era of expansion and conflict. Featuring a distinctive blue-ticked khaki canvas body, this belt showcases the iconic Mills-style loop design, complete with brass hardware and period-authentic detailing. Whether slung over the shoulder of a soldier in the Philippines or lining a collector’s display today, this piece radiates authenticity and historical significance. It's not just gear—it's a battlefield companion from an era when America was stepping onto the world stage.

For collectors of U.S. militaria, Spanish-American War artifacts like this are getting harder to find in complete, presentable condition. This belt is a stunning example of late 19th-century military engineering—equal parts function and form, built to carry the revolutionary Krag-Jørgensen rifle's rimmed cartridges. Whether you're building a mannequin display, restoring a war-era uniform, or simply looking to own a tangible piece of the past, this cartridge belt tells a powerful story of courage, evolution, and American grit.

This rare U.S. Army M1903 Cartridge Belt is an outstanding relic from the earliest days of the legendary Springfield M1903 rifle! Featuring the highly sought-after rimless eagle snap closures, this belt represents a fascinating transitional period in American military gear. Designed originally for the .30-03 cartridge, this model predates the widespread adoption of .30-06 in 1906, making it a scarce and historically significant piece. Its rugged khaki web construction, sturdy brass hardware, and classic ten-pocket layout reflect the Army's shift toward modernized field equipment in the early 20th century. Whether carried through the tropical jungles of the Philippine Insurrection or issued to troops in the years before World War I, this belt is a direct link to one of the most pivotal eras in U.S. military history.

For collectors of pre-WWI militaria, this example is a must-have! The belt remains in remarkable condition, with strong webbing, functional snaps, and only light wear consistent with age. Its crisp details and rugged authenticity make it a standout display piece, while its historical importance ensures its value in any serious collection. Whether you're a Springfield M1903 enthusiast, a historian fascinated by America’s colonial campaigns, or a military gear collector looking for a true piece of U.S. Army heritage, this belt offers a tangible connection to the soldiers who carried it over a century ago. Don’t miss the opportunity to own a genuine piece of military history!

The US Army was slow to adopt modern rifles after the Civil War, and only in 1892 was the first effective repeating rifle, the Krag-Jorgensen, taken into service. Known simply as "the Krag", it was the mainstay of the US Army in the Spanish-American War and the Philippine Insurrection that followed. Early M-1892 Krags featured a one-piece cleaning rod under the barrel, any surviving examples of which remain quite scarce and desirable today. This US Army Pre-Span Am Early M-1892 .30-40 Krag Rifle One-Piece Cleaning Rod is in Very Good Condition, with a slight overall bend, and with some light overall patina, sticky grayish residue, and age wear evident. Most interestingly, it measures 29 3/8” long, boasts the classic flat top head with eye, and sports the traditional threaded bottom. A fine example of an extremely rare, original US Army Pre-Span Am Early M-1892 .30-40 Krag Rifle One-Piece Cleaning Rod. Lastly, this cleaning rod comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This original M1896 Krag-Jorgensen carbine hand guard was issued to U.S. cavalry troops during the Spanish-American War. Made from American walnut, it features the correct high-hump profile for the 1896 rear sight and was designed for the shorter carbine barrel. Sourced from the respected Canfield Collection, this piece carries strong provenance and authenticity, reflecting its role in early U.S. military history. It shows honest wear from field use but remains solid with no cracks or major damage—ideal for restoration or collection. Original Krag carbine hand guards are increasingly scarce, especially with this level of originality and documentation.

Make: Springfield Armory

Model: Model 1898 Krag

Serial Number: 97408

Year of Manufacture: 1898 (Antique)

Caliber: .30-40 Krag

Action Type: Bolt Action, Fed by Side Loading Gate into Internal Magazine

Barrel Length: 24” (sporterized, shortened from original military length)

Sights / Optics: The front sight is a blade dovetailed into a raised post. The rear sight is a sliding elevator sight.

Stock Configuration & Condition: The stock is in a sporterized 2 piece wood configuration featuring a straight comb, steel buttplate, straight grip and grooved forend. The LOP is 13.5” from the front of the trigger to the back of the buttplate. There are some light scratches and compression marks present. There are no chips or cracks. The stock rates in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This rifle retains about 87% of its current metal finish. There is moderate surface oxidation present on the finish. The markings are clear. The bluing is strong. The screw heads are lightly tool marked with serviceable slots. This rifle rates in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Springfield Model 1898 Krag is an iconic rifle in U.S. military history, known for its unique side-loading magazine and exceptionally smooth bolt action. Although originally designed as a military service rifle, many Krags were sold off as surplus and sporterized by civilians during the early to mid-20th century, giving them a second life as hunting rifles.

This particular example, manufactured in 1898 and thus classified as an antique, has undergone a classic sporterization. The barrel has been trimmed to 24", the stock reshaped and refinished, and the handguard removed—enhancing its portability and handling for field use. The original military rear sight remains intact, preserving a bit of its martial heritage.

Collectors of antique firearms, historical shooters, and hunters alike can appreciate this rifle for its smooth action, solid bore, and unique place in U.S. firearms evolution. Its antique status adds further appeal, making it a no-FFL-required addition to any enthusiast's collection.

Make: U.S. Springfield Armory

Model: 1898 Krag-Jorgensen Carbine

Serial Number: 124975

Year of Manufacture: 1898

Caliber: .30-40 Krag

Action Type: Bolt Action, Fed by Side Loading Gate and Internal Magazine

Barrel Length: 22”

Sights / Optics: The front sight is a blade pinned into a raised post. The rear sight is an adjustable ladder sight.

Stock Configuration & Condition: The stock is in a 2 piece wood configuration featuring a straight comb, steel buttplate, straight grip and grooved forend. The LOP is 13.5” from the front of the trigger to the back of the buttplate. There are some light scratches present. There are no chips or cracks present. The stock rates in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This rifle retains about 15% of its original metal finish. The finish has faded to a rich patina. There are some light scratches present. The markings are clear. The screw head are lightly tool marked. This rifle rates in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The U.S. Springfield Model 1898 Krag-Jorgensen represents a pivotal moment in American military firearm design. As the last single-shot loading gate magazine rifle issued in significant numbers to U.S. troops, it bridges the gap between 19th-century and early 20th-century combat arms. This particular example, manufactured in 1898 and classified as an Antique, features the correct 22” barrel, “C”-marked rear sight, and cartouched stock indicative of original carbine configuration—details that bolster its desirability.

The Krag's unique side-loading magazine design and exceptionally smooth bolt action earned high praise during its time, and today, these rifles remain a favorite among collectors and historians alike. The bright bore and strong rifling on this example make it not only collectible but also a viable shooter for those seeking authentic period performance.

This 1898 Krag-Jorgensen carbine, retaining much of its original blued finish and marked by authentic inspector stamps, is an excellent addition to any collection of U.S. military rifles. Whether you're a history enthusiast, seasoned collector, or first-time buyer seeking a classic, this rifle offers both character and historical significance.

The US Marine Corps has always prided itself on being “first to fight”, and so it was that Marine units were sent to France as part of the Army’s 2nd Infantry Division soon after America entered World War 1. The Marines were rushed forward to the Marne to staunch the great German spring offensive in 1918. They passed columns of defeated French troops streaming rearward as the Marines headed towards the front. The dispirited French called out to the Marines- “Le guerre est fini”- (“the war is over, finished”). The Marines called back -”Pas Fini”- (“it’s NOT over”). The Marines stopped the Germans cold in the ensuing Battle of Belleau Wood, and then began to turn the tide at Chateau-Thierry. The Leathernecks’ stand at Belleau Wood is considered one of the crowning feats of arms in the long, storied, and proud history of the US Marine Corps. US Marines in WW1 and the early days of WW2 were issued their own specially designed USMC first aid pouch, designated the P-1912, which featured a rounded front flap (as opposed to the square flap of the Army version) with dual darkened brass "glove" snap closures. This USMC Marine US WW1 WW2 Early Type 1 P-1912 Khaki First Aid Pouch is in Good Condition, with a small spot of surface fraying in the lower middle and lower left front flap, a spot of brownish soiling at the right front flap, a few small spots of brownish soiling at the lower right front body, a small frayed tear under the wire hanger grommet at the upper right back, the traditional “rectangular and X” sewn wire hanger support having been neatly removed from the upper back, some illegible numbers and letters faintly hand marked in black at the lower back, and with some overall fading and age wear evident. Most interestingly, it boasts the original, fully intact "CARR'S. / PAT. ‘13" stamped dual darkened brass "glove" snap closures on the classic P-1912 rounded front flap, sports an intact darkened brass wire hanger through a pair of brass grommets at the upper back, the combination of which distinguishes it as the early “Type 1”, and is correctly unmarked as to its maker or date. It’s complete with an original US Army WW1 Bauer & Black “D” Ring First Aid Packet in Fair Condition, with heavy overall denting and age wear evident. Most interestingly, it's marked "FIRST AID PACKET - U.S. ARMY" in relief at front, along with the date, “CONTRACT AUG. 1918”, and its maker, the famous "BAUER & BLACK", carries a fully intact metal "D" ring opener at the lower right back, and the set is a fine example of a very rare, original USMC Marine US WW1 WW2 Early Type 1 P-1912 Khaki First Aid Pouch. A great relic of the “Old Corps in the Great War”.

Military medicine early in WW1 had changed little in the 50 years since the American Civil War. As the war progressed, advances on the battlefield led to advances in medical treatment, beginning with well trained and equipped medics rendering immediate attention to wounded men. Medics used a wide array of supplies, carried in the specially designed M-1910 medical corpsman belt. This US Army WW1 Mills M-1910 Khaki Medical Corpsman Belt is in Very Good Condition, with a very small frayed hole in the front left pocket flap (near but not under the lift-the-dot), moderate tearing to the top left corner of the back left pocket flap, some brownish and dark soiling to that back left pocket flap, some light scattered verdigris, brownish, and dark spot soiling throughout, and with some light overall age wear evident. Most interestingly, it boasts fully functional darkened brass “lift-the-dot" closures on the 10 pockets throughout, sports a fully intact darkened brass front buckle, and is stamped at the interior left front with the classic “bullet” maker’s logo of the famous “MILLS”, along with the manufacturing date, “DEC. 1917”. It’s marked on the interior sizing ends with that same “bullet” maker's logo, as well as several patent dates, and is a fine example of a rare, original US Army WW1 Mills M-1910 Khaki Medical Corpsman Belt. Lastly, this belt comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

US Army troops of the early 1900s were issued the M-1905 bayonet for use with the Springfield, and it was carried in the specially designed 1st pattern leather scabbard fitted with the Krag style swivel belt hanger then in use. This US Army Pre-WW1 Early No Serial Number RIA M-1905 Springfield Bayonet is in Good Condition, with some light rounding to the blade tip, a chip in the middle top false edge, some sharpening to the blade edge and top false edge, some cleaning, scratching, and pitting at each side of the blade, some cleaning, scratching, and patina to the guard and pommel, some regimental markings having faded away from the reverse ricasso, though they appear to read “K3 / 4”, the handle scales remaining “shy” of the tang, some chipping to the bottom of the right handle scale, some scattered darkening to the handle scales, and with some overall age wear evident. Most interestingly, it features a 15 3/4" bright fullered spearpoint blade that was factory left “in the white”, sports the classic walnut handle scales, and is marked at the ricasso with its maker in serifed lettering, "R.I.A." (the famous Rock Island Arsenal), the traditional "flaming bomb" acceptance stamp of the Ordnance Department, and the scarce early date, "1906.". It's "US" marked with serifs at the reverse ricasso, boasts a fully functional press stud and locking latch, and is such an early piece in fact that it carries no serial number, a trait only found on first year production RIA M-1905 bayonets. It’s complete with the original US Army Pre-WW1 1st Pattern Krag Style Leather Springfield Bayonet Scabbard in Fair Condition, with moderate patina to the metal throat, a few spot dents in the upper front throat, moderate denting and seam tearing to the bottom back end tip of the leather body, moderate drying, scratching, and crazing to the leather body, all of the maker and date marks having faded away from the upper back body, with only the inspector initials “TC” remaining visible, and with moderate overall age wear evident. Most interestingly, it bears a fully intact darkened metal Krag style swivel belt hanger riveted to the upper back of the metal throat, exhibits the traditional brown leather body, and the set is a fine example of a very rare, original US Army Pre-WW1 Early No Serial Number RIA M-1905 Springfield Bayonet. Lastly, this bayonet and scabbard come directly from the personal collection of renowned military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

This is an exceptional example of a Pre-World War I U.S. Army M-1910 Canvas Cartridge Belt, featuring the distinctive "eagle snap" closures and designed to carry .30-06 Springfield ammunition in both rimless and rimmed clip configurations. These early M-1910 belts were manufactured during a critical transition period in U.S. military gear development and represent one of the first standardized load-bearing systems adopted across all service branches. The eagle snaps are an iconic hallmark of pre-WWI issue belts, and this particular example has all ten pouches intact, with the original khaki webbing showing honest service wear and patina that adds to its authenticity and character.

Collectors and living history enthusiasts alike will appreciate the historical significance and hard-to-find configuration of this belt. Issued just prior to America's entry into WWI, these belts were used extensively by Doughboys and remained in use into the early years of WWII. This model is specifically designed for use with the M1903 Springfield rifle, and the rimmed/rimless designation reflects the Army’s attempt to accommodate variations in clip design. If you’re building out a U.S. infantryman’s kit, curating a display, or simply want a piece of genuine U.S. military history, this Pre-WWI Eagle Snap M-1910 Cartridge Belt is a rare and exciting find!

This U.S. Army Pre-WW1 Frankford Arsenal .30-03 Springfield Wooden Cartridge Crate is a rare and historically significant ammunition container from the early 20th century. Manufactured at the Frankford Arsenal, a key U.S. military ammunition production facility, this crate was used to store and transport .30-03 Springfield cartridges, the original chambering for the Springfield Model 1903 rifle before the transition to the .30-06 in 1906. With its sturdy wooden construction, the crate measures 18" x 13" x 6", featuring period-correct military stenciling that likely includes caliber markings, lot numbers, and ordnance symbols.

Due to the short production span of the .30-03 cartridge, surviving crates from this era are exceptionally scarce, making this a highly desirable piece for collectors of U.S. military artifacts and early Springfield rifle history. Whether displayed in a historical collection or preserved as a unique relic of America’s early 20th-century military advancements, this crate is a tangible link to the formative years of modern U.S. military ammunition development.

This is an exceptional example of an early U.S. Army M1903 Springfield leather rifle sling, dated 1904, manufactured at Rock Island Arsenal and marked “ROCK ISLAND ARSENAL 1904 T.C.C.” This sling represents the very first year of M1903 production and predates the .30-06 conversion, making it historically tied to the earliest .30-03 rifles issued by the U.S. military. Constructed of thick russet leather, the sling features brass hooks and multiple adjustment holes, correct for the early configuration used on pre-WWI M1903 rifles. The leather remains supple with expected age-related wear, including minor surface cracking and patina to the hardware, but it is structurally sound and very well preserved for its age. This piece comes from the Canfield Collection, known for its rigorously curated and historically significant U.S. military items. Original, unit-marked and dated slings from 1904 are exceedingly rare, especially those tied to Rock Island Arsenal's initial output. This is a top-tier collectible accessory that would complete an early Springfield display or stand alone as an important piece of U.S. ordnance history.

Make: Colt

Model: 1917

Serial Number: 296770

Year of Manufacture: 1920

Caliber: .45 ACP (Auto Rim Capable with moon clips)

Action Type: Double Action Revolver with Swing-Out Cylinder

Markings: The left side of the barrel is marked ""COLT D.A. 45"". The underside of the barrel is marked ""UNITED STATES PROPERTY"". The left side of the frame is marked with the Rampant Colt logo. The butt is marked with the serial number ""296770"", ""U.S. ARMY MODEL 1917"", and ""No. 79 630"". The left side of the topstrap is distinctly marked with an eagle’s head over ""S/6"". All markings are crisp and clear.

Barrel Length: 5.5”

Sights / Optics: The revolver features a fixed quarter-round blade front sight (slightly bent) and a frame-notch rear sight.

Stock Configuration & Condition: Smooth walnut grips exhibit honest wear from service use, with handling marks and scattered shallow dents consistent with military issue. No cracks or significant damage is present.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore but there is stubborn fouling throughout. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains about 90% of its original finish. The finish exhibits typical thinning at high edges, muzzle, cylinder, and grip straps. There are scattered minor surface marks and signs of handling commensurate with its age and military service. Overall, the revolver shows well and maintains substantial original appeal.

Mechanics: The action functions correctly. Cylinder lockup is solid, the trigger pull is smooth in double action and crisp in single action. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None included.

Our Assessment: The Colt Model 1917 revolver was manufactured during World War I to supplement the shortage of the Model 1911 semi-automatic pistols. Chambered for the .45 ACP cartridge using half or full-moon clips, these revolvers were reliable sidearms widely appreciated for their power, accuracy, and robust design. This revolver, bearing crisp U.S. military inspection marks—including a notable eagle’s head over ""S/6"" marking on the left side of the topstrap—offers significant historical interest and collectibility.

This particular example is in very good condition, retaining approximately 90% of its original blue finish, complemented by smooth walnut grips showing honest wear consistent with military use. With a strong, clean bore rating 9/10, it remains an excellent candidate for collectors, military firearm enthusiasts, and shooters alike.

If you’re seeking a classic piece of American military firearms history, this Colt 1917 is a fine representative example deserving a place in your collection.

Make: Remington Arms Co.

Model: 03-A3

Serial Number: 4057042

Year of Manufacture: 1942, Barrel Date: 9-43

Caliber: .30-06 Springfield

Action Type: Bolt action, internal 5 round magazine

Markings: The top of the receiver is marked, “U.S. REMINGTON / MODEL 03-A3 / 4057042”. The mag disconnect is marked, “ON / OFF”. The barrel is marked “RA / 9-43” with an ordnance bomb. The stock is marked “RA” (Remington Arms), with a crossed cannons cartouche and with an inspector cartouche “FJA” in a box. There is a circled P on the front of the grip along with small proofs forward of the bottom metal.

Barrel Length: 24”

Sights / Optics: he front sight is a pinned blade set atop a raised base with a protective hood. The rear sight is a fully adjustable aperture sight marked from “2-8” on the top and “0” with hash marks on the rear

Stock Configuration & Condition: The stock is a two piece wood set with a forend cap/bayonet lug & stacking loop, barrel band w/ sling loop, straight wrist, straight comb, sling loop, and steel buttplate with trap door for storage compartment. The stock has been refurbished. There are scattered faint compression lines and scratches throughout. There are some minor chips throughout. There are no cracks. The LOP measures 12 7/8" from the front of the trigger to the rear of the buttplate. The stock rates in about Excellent overall condition. The stock retains its complete cleaning kit.

Type of Finish: Blued/Parkerized.

Finish Originality: Original to arsenal refurbishment.

Bore Condition: The two groove bore is semi bright and the rifling is sharp. There is faint erosion in the bore. In this writer’s opinion the bore rates 9/10.

Overall Condition: This rifle retains about 98% of its metal finish. There are light handling marks throughout. The action has minimal wear. The rear action screw is short. The screw heads are sharp. The markings are clear. Overall, this rifle rates in about Excellent condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes with a leather sling in Good condition. The leather is quite dry. There are no rips or tears.

Our Assessment: This U.S. Remington Model 1903-A3, manufactured in 1942, is a prime example of America’s effort to modernize and streamline infantry rifle production during World War II. As the war intensified, Remington adopted design simplifications like stamped parts and an aperture rear sight to increase production efficiency without sacrificing battlefield reliability. This rifle bears all the correct features of a WWII-era 03-A3, including the “RA” barrel dated 9-43, appropriate inspector cartouches like “FJA,” and the distinctive Remington rollmarks on the receiver. The presence of a correct WWII-era stock with visible cartouches and a functional storage compartment further enhances its historical authenticity. This example is in exceptional condition for a service rifle of its age, retaining approximately 98% of its metal finish. The parkerized components show minimal wear, with only light handling marks visible under close inspection. The bore is semi-bright with sharp rifling and only faint erosion, rating a strong 9/10. The stock retains all critical markings, including the RA and crossed cannons cartouches, a boxed FJA inspector mark, and the correct circled “P” proof on the grip. Structurally, the stock is excellent, with no cracks and only minor chips and compression marks. The rifle includes its original cleaning kit and an issued leather sling, which remains intact though the leather is dry from age.

For collectors of U.S. military arms, the 1903-A3 stands as one of the most practical and accurate bolt-action rifles of the WWII era. This rifle is an excellent example for both display and range use, combining historical authenticity with mechanical soundness. Its strong bore, arsenal-correct features, and overall superb condition make it especially appealing to C&R collectors, reenactors, and marksmen interested in classic U.S. military hardware. Whether appreciated for its wartime service, craftsmanship, or long-range accuracy, this Remington 1903-A3 is a top-tier addition to any collection.

Make: Remington

Model: 1903A3 (03-A3)

Serial Number: 4045082

Year of Manufacture: 1943, Barrel Date: September, 1943

Caliber: .30-06 Springfield

Action Type: Bolt Action, Internal Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a pinned blade set atop a raised base. The rear sight is a fully adjustable aperture sight marked from “2-8” on the top and “0” with hash marks on the rear. A sight cover is installed on the front sight.

Stock Configuration & Condition: The hardwood stock has a straight grip, metal nose cap with bayonet lug, stacking loop, 2 barrel bands, 2 sling loops, 2 through bolts, and a metal buttplate with hinged door for storage (nothing in the compartment). The left of the stock has a "B.A. J.L." Benicia Arsenal refurbish mark. The wood shows light wear with some nicks, scuffs and scratches. There is some discoloration. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The stock rates in Very Good Plus overall condition.

Type of Finish: Parkerized & Blued

Finish Originality: Most parts' finish appears Original, the safety is parkerized while the rest of the bolt assembly is blued. Some other parts may have been refurbished. Correct R-marked parts.

Bore Condition: The rifle uses a 2-grooved bore. The bore is mostly bright. The rifling is sharp. There is no erosion in the bore, but there is a little stubborn copper fouling. In this writer's opinion, the bore rates 9/10.

Overall Condition: This rifle retains about 95% of its metal finish. The metal shows scattered minor scuffs and small scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The metal markings are clear, the wood markings show some wear. Overall, this rifle rates in Fine condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes in a green canvas zipper case with canvas sling, bandoleer with twelve 5-round clips of ammunition, canvas belt with ammo pouches, med-pouch with Carlisle Model First Aid Packet (sealed) and a U.F.H. M1 bayonet with scabbard.

Our Assessment: When the US Army was looking for a rifle design to replace the 1898 Krag rifle, they looked directly at the Spanish Model 1893 Mauser. This was due to the fact that the performance of the Model 1893 Mauser was far superior than that of the 1898 Krag during the Spanish-American War. The Model 1903 is basically a redesigned Mauser clone. A U.S. Patent Court eventually found that the U.S. Army had violated Mauser’s patents and required the U.S. Army to pay the German Mauser manufacturers patent royalties. Payments were stopped once WWI started. The 1903 has a strong reliable action that served the Army for over thirty years in two world wars. The 1903A3 is an improved version of the 1903 rifle that was introduced in 1942. The most significant change was the switch to a receiver bridge-mounted rear aperture sight.

This Remington Model 1903-A3 was made back in 1943. The rifle looks great for being more than 80 years old. It has nice Remington markings on the receiver and barrel as well as small “R” stamps on many of the metal parts. This Remington Model 1903-A3 has a strong bright bore so it should do well at the range. It will add to your WWII or Military collection. Please see our photos and good luck!

Make: Remington

Model: 1903A3 (03-A3)

Serial Number: 3819321

Year of Manufacture: 1943, Barrel date - May 1943

Caliber: .30-06 Springfield

Action Type: Bolt Action, Internal Magazine

Markings: The top of the receiver is marked “U.S. / REMINGTON / MODEL 03-A3 / 3819321”. The safety is marked “SAFE READY” and the magazine cutoff is marked “ON OFF”. The underside of the bolt handle, the bolt sleeve, safety lever, magazine selector, nosecap, stacking loop, and sling loop are marked “R” for Remington. There is no marking on the nose of the stock. The left side of the stock, above the trigger, is marked “RA” (Remington Arms), with a “crossed cannons” cartouche and with an inspector cartouche “FJA in a box”. The bottom of the grip is marked with a “circled P” proof. The belly of the stock is marked with inspection stamps.

Barrel Length: 24""

Sights / Optics: The front sight is a pinned blade set atop a raised base. The rear sight is a fully adjustable aperture sight marked from “2-8” on the top and “0” with hash marks on the rear.

Stock Configuration & Condition: The hardwood stock has a straight grip, metal nose cap with bayonet lug, stacking loop, 2 barrel bands, 2 sling loops, 2 through bolts, and a metal buttplate with hinged door for storage (nothing in the compartment). The wood shows light scratches and compression marks. The most prominent marks are on the belly of the stock. Some of the marks have damaged small portions of the surface wood. The stock has been oiled. The LOP measures 13"" from the front of the trigger’s installed wide, serrated shoe to the back of the buttplate. The stock rates in about Very Good Plus overall condition as refinished.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The rifle uses a 2 grooved bore. The bore is bright. The rifleing is sharp. There is no erosion. The bore shows an M.E. of 1.5.

Overall Condition: This rifle retains about 95% of its metal finish. The metal shows scattered scuffs, scrapes and scratches. The most prominent marks light corrosion ear the muzzle. The screw heads are intact. The markings on the metal are deep. The markings on the wood are strong. Overall, this rifle rates in about Very Good Plus condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: The trigger shoe, leather sling and canvas muzzle cover accompany the rifle.

Our Assessment: When the US Army was looking for a rifle design to replace the 1898 Krag rifle, they looked directly at the Spanish Model 1893 Mauser. This was due to the fact that the performance of the Model 1893 Mauser was far superior than that of the 1898 Krag during the Spanish-American War. The Model 1903 is basically a redesigned Mauser clone. A U.S. Patent Court eventually found that the U.S. Army had violated Mauser’s patents and required the U.S. Army to pay the German Mauser manufacturers patent royalties. Payments were stopped once WWI started. The 1903 has a strong reliable action that served the Army for over thirty years in two world wars. The 1903A3 is an improved version of the 1903 rifle that was introduced in 1942. The most significant change was the switch to a receiver bridge-mounted rear aperture sight.

This Remington Model 1903-A3 was made back in 1943. The rifle looks great for being more than 80 years old. It has nice Remington markings on the receiver and barrel as well as small “R” stamps on many of the metal parts. There are also markings on the stock which add to the rifle’s history. This Remington Model 1903-A3 has a strong bright bore so it will do well at the range. It will add to any WWII or Military collection.

This U.S. Army WWII M1903 Springfield Rifle Repair Kit is an original military-issued collection of essential spare parts used for the maintenance and repair of the M1903 service rifle. These kits were critical for armorers and field personnel to keep rifles operational during the war, ensuring that worn or damaged components could be replaced quickly in combat or training environments. The included parts list features key components such as extractors, firing pins, safety locks, rear sight elements, and various springs and screws, all vital for the function of the rifle.

Still in its original packing, this repair kit is a significant historical artifact from World War II, offering collectors and military historians an authentic glimpse into the logistical efforts behind weapon maintenance. Whether preserved as a collector’s piece or used to restore a period-correct rifle, this kit represents an important piece of U.S. military history. The presence of original military stock numbers and nomenclature further adds to its authenticity and desirability among enthusiasts.

Get ready to step into history with this incredible US Army WWII M-1903 Springfield / M-1 Garand Rifle Cartridge Belt, manufactured by the legendary Boyt in 1944! This is the iconic OD green M-1923 belt, purpose-built to carry en bloc clips for the M1 Garand or stripper clips for the M1903 Springfield. With ten perfectly riveted pouches, brass grommets for attaching gear, and clear "BOYT -44-" markings, this belt screams authenticity. Whether you're a passionate reenactor or a WWII collector, this original 1944-dated piece is a must-have for your gear setup or display.

The condition is superb for its age, showing honest wear and a beautiful patina that tells its own story from the Greatest Generation. The canvas is sturdy, the stitching tight, and the U.S. stencil across the front proudly stands out. Whether you're outfitting a full field gear mannequin, rounding out a D-Day collection, or just adding one more gem to your WWII shelf, this belt is the real deal—authentic, rugged, and rich with American military history.

This rare original US Army WWI-era Remington-UMC box of 40 .30 Auto Pedersen Device cartridges is an exceptional piece of early 20th-century military innovation! These unique rounds were developed specifically for the secretive and ambitious Pedersen Device—an attachment that could instantly convert a standard M1903 Springfield rifle into a semi-automatic carbine. Packed neatly in the original military-style box, this lot offers a glimpse into one of the most fascinating "what-if" chapters of American arms development. With the Pedersen Device never widely deployed before the end of the war, surviving ammunition like this is extremely scarce and highly sought after by collectors.

Whether you're a military historian, a World War I collector, or a fan of rare experimental ammo, this box is a showstopper. The label is clear, the packaging authentic, and the historical significance undeniable. It’s more than just ammo—it’s a tangible link to a bold wartime innovation that nearly changed the course of infantry combat. This is the kind of item that doesn’t come around often—don't miss your shot at owning a rare relic from the dawn of American semi-auto warfare!

Manufactured in 1970, this is a complete can of 7.62x51mm NATO Match ammunition made by the Lake City Army Ammunition Plant operated by Remington (now operated by Winchester). All twenty-three boxes are from the lot number 20-4 as marked on the outside of the can. While the exterior of the can shows oxidation and wear, the boxes appear to be in pretty good shape. As they are sealed, we have not opened them to inspect the cartridges.

Make: Eddystone

Model: U.S. Model of 1917 (Sporterized)

Serial Number: 774858

Year of Manufacture: Circa 1917. C&R Eligible

Caliber: .30-06 Springfield

Action Type: Bolt Action, Internal Magazine

Markings: The receiver is marked “U.S. / MODEL OF 1917 / EDDYSTONE / 774858”. The barrel near the receiver ring is marked with the “E” for Eddystone and a flaming bomb ordnance mark. Additional markings are partially obscured by the scope mount.

Barrel Length: 26”

Sights / Optics: This rifle is fitted with a Simmons scope marked “3-9x23” and “Deerfield”. The scope has a duplex reticle. The glass is clear with minor dust and signs of age. The scope is mounted on a base. The front sight The rear iron sight have been removed during sporterization. The scope rates in about Good condition.

Stock Configuration & Condition: The stock is a custom sporter stock with semi-pistol grip, raised comb with cheek piece, and a rubber buttpad. It features checkered grip and forend panels, a white spacer with decorative grip cap, and a black plastic buttplate with white spacer. The right side of the buttstock features a diamond-shaped inlay with a white center. The LOP measures 13 7/8" from the front of the trigger to the back of the buttplate. The stock shows multiple dings, nicks, and scratches from handling and age. Checkering is moderately worn but visible. The stock rates in about Good overall condition.

Magazine Quantity & Condition: The rifle retains its internal magazine system with a floorplate.

Type of Finish: Blued

Finish Originality: Not original. This rifle has been refinished and sporterized.

Bore Condition: The bore is bright, the rifling is sharp. There is very light visible erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: This rifle retains about 55% of its current metal finish. The balance of the finish shows moderate operational wear, thinning throughout, oxidation, and scattered freckling. The receiver shows signs of past rust that has been cleaned. The screw heads are serviceable but show mild tooling. The pins are unmarred. The markings are sharp and legible. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: Included is the mounted Bushnell scope. No box or additional accessories are included.

Our Assessment: This rifle began its life as a U.S. Model of 1917 bolt action rifle, one of the most robust and powerful rifles issued to American troops during World War I. Manufactured by Eddystone, it was chambered in the powerful .30-06 Springfield cartridge and known for its strong action and reliability under adverse conditions.

This particular example has been sporterized, a common practice in the mid-20th century when surplus military rifles were converted into hunting rifles. The original full-length military stock has been replaced with a custom Monte Carlo sporter stock, and a Bushnell scope has been mounted for hunting use. While collectors may prefer unaltered rifles, sporterized variants like this still retain the strength of the 1917 action, ideal for big game hunting.

For hunters and enthusiasts looking for a dependable and historically rich rifle for the field, this Eddystone sporter offers a unique combination of heritage, utility, and affordability. The bright bore and solid mechanics make it ready for use, while the craftsmanship of the sporterization reflects a bygone era of hand-finished hunting rifles.

Make: Winchester

Model: 1897 Trench Gun

Serial Number: 669782

Year of Manufacture: Ca. 1918

Gauge: 12 Gauge, 2 3/4"" Shells

Action Type: Pump / Slide Action, Tube Magazine Fed Shotgun

Barrel Length: 20"" Nominal, 20 1/4"" Measured

Choke: Fixed Cylinder Bore

Sights / Optics: There is a brass bead mounted to the bayonet lug assembly. The barrel is not drilled for a bead. The top of the receiver has a sighting plane.

Stock Configuration & Condition: The stocks are two-piece walnut with a grooved slide handle, pistol grip, straight comb, inlaid sling plate in the belly and checkered black hard rubber Winchester buttplate. The bottom of the grip is stamped ""F"". There are some scattered nicks and scratches. There is a more notable ding at the left-rear of the forend and a loss at the heel. The LOP measures 13 7/8"" from the front of the trigger to the back of the buttplate. The plate has minor wear with well defined checkering and lettering. Overall, the stocks are in about Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is mostly bright. There is no erosion in the bore, but there is stubborn dried grease. In this writer's opinion, the bore rates 9+ out of 10.

Overall Condition: This shotgun retains about 90% of its metal finish. The finish is generally strong with thinning at some edges. The most notable finish wear is on the trigger guard and receiver. The worn areas show discoloration from oxidation. There are some scattered light nicks and small scratches. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this shotgun is in Very Good-plus condition.

Mechanics: The actions functions correctly. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: After observing the Great War for the first three years, it became clear to the U.S. that serious close-range firepower was needed in trench warfare. The Model 1897 Trench Gun was an evolution of this idea. The pre-existing Winchester Model 1897 was modified by adding a perforated steel heat shield over the barrel which protected the hand of the user from the barrel when it became over-heated, and an adapter with bayonet lug for affixing an M1917 bayonet. They were so effective and brutal in combat that the German high command once announced they would execute any US soldier captured with one in his possession. The 1897 Trench Gun was also durable enough that it would go on to see service in the second World War all the way through to the Gulf War.

This example was produced Ca. 1918 and has correct features for a Trench Gun. Unlike many WWI 1897 Trench Guns, there are martial markings on this shotgun, the right side of the receiver has “U S” hand-stamped over a flaming bomb Ordnance mark. There has been no end of speculation among collectors as to the reason for unmarked trench guns, but it appears that there were many which were delivered too late to actually make it to the front lines. The end of WWI came as a shock to nearly everyone. At the time, most of the Allied powers believed that the war would continue for at least a few more years. The German offensive Operation Michael had just been halted and the Second Battle of the Marne, the first successful Allied offensive, was just starting. No one would guess that the war would end less than 6 months later. Consequently, there were likely many Trench Guns which had been produced and/or delivered which were never issued and simply remained in the government’s inventory. This example, however, has markings consistent with a gun delivered early enough to be inspected and issued.

The gun is in Very Good-plus condition, showing very little wear considering its age and service. This is a well preserved military 97 that will be tons of fun to shoot at the range and will be a great addition to any collection. Please see our photos and good luck!

Make: Winchester

Model: 12 Trench Gun

Serial Number: 1032895

Year of Manufacture: Ca. 1945, 43 barrel date.

Gauge: 12 Gauge, 2 3/4" Shells

Action Type: Pump / Slide Action, Tube Magazine Fed Takedown Shotgun

Barrel Length: 20" Nominal, 20 3/4" Measured

Choke: Fixed Cylinder Bore

Sights / Optics: There is a silver-colored bead mounted to the bayonet lug assembly. The barrel is not drilled for a bead. The top of the receiver has a sighting plane, serrated for glare reduction.

Stock Configuration & Condition: The stocks are two-piece walnut with a grooved slide handle, pistol grip, straight comb, inlaid sling swivel plate in the belly, and checkered black hard rubber Winchester buttplate. The left of the buttstock has a "G.H.D." in box cartouche over an Ordnance wheel. The left of the heel has what appears to be a spot of white-out with "52" hand-written. The stocks have minor wear with some light nicks, scuffs and scratches. The LOP measures 14" from the front of the trigger to the back of the buttplate. The plate has minor wear with well defined checkering and lettering. Overall, the stocks are in Fine condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is mostly bright. There is no erosion in the bore, but there is some stubborn dried grease. In this writer's opinion, the bore rates 9+ out of 10.

Overall Condition: This shotgun retains about 90% of its metal finish. The finish is generally strong with thinning at some edges. There are some scattered small marks and light operational wear. There are tool marks at the front of the magazine tube. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this shotgun is in Very Good-plus condition.

Mechanics: The actions functions correctly. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: A leather military-style sling is installed.

Our Assessment: The Model 1912 (shortened to Model 12 in 1919) was the next step from the Winchester Model 1897 hammer-fired shotgun, which in turn had evolved from the earlier Winchester Model 1893 shotgun. The Model 12 was designed by Winchester engineer T.C. Johnson, and was based in part on the M1893/97 design by John M. Browning, in that it used a sliding forearm or "pump action" to cycle the mechanism. Along with the 1897, the Model 12 was used in both World Wars by U.S. Armed Forces in both Trench and Riot configurations.

This is a WWII vintage Trench Gun which was made around 1945. The great majority of Trench Guns were finished by Winchester with commercial-grade polish and bluing and most of these were later parkerized when they were refurbished. Much less common are factory parkerized Trench Guns. Bruce Canfield lays out four points of consideration in his book "Complete Guide to United States Military Combat Shotguns". Serial numbered above 1,030,000? Check. Receiver with a rough, unpolished texture? Check. Some blued parts? Trigger, screws, safety, check. Parkerizing grayish with a green tint from cosmoline or oil? Also check. This late-war Trench Gun checks all the boxes and will make a wonderful addition to even advanced collections. Please see our pictures and good luck!

Step back in time with this exceptional US Army WWII-era box of 24 Winchester Repeating Arms 12 GA brass 00 buckshot shotgun shells—an authentic piece of American military history! These shells, housed in their original government-marked box, were manufactured by Winchester specifically for wartime use, making them a rare and highly desirable collectible for military enthusiasts, ammo historians, and WWII collectors alike. The all-brass construction is an iconic throwback to the era before plastic hulls, and the 00 buckshot load delivers that unmistakable battlefield punch that was trusted by troops in the trenches, jungles, and everything in between.

Whether you're building a vintage military display, curating a WWII arms and ammunition collection, or simply love the nostalgia and rugged beauty of early American ordinance, this complete and original box stands tall as a centerpiece item. The Winchester name, combined with US Army provenance and wartime production, makes this set a standout artifact with strong collector appeal. It’s not just ammo—it’s a tangible link to the soldiers who carried these into combat during one of the most defining chapters in world history.

This offering is a remarkable piece of U.S. military history, originating from the acclaimed Canfield Collection and featuring 8 full boxes, 7 in their original waxed paper packaging, (25 shells each) of Western Cartridge Company 12-gauge 00 buckshot, all neatly stored in the original WWII-era wooden military ammunition crate. These shells are the iconic brass-headed, paper-hulled type commonly issued to U.S. forces during the Second World War, with clear military contract markings and Western branding. The crate itself, measuring approximately 15" x 9" x 9", retains its original period stenciling, handles, and hardware, presenting a rich, authentic patina. This ammunition was typically issued to military police, naval security, and combat troops for close-quarters defense, particularly in the Pacific theater. The 00 buckshot load was prized for its stopping power and remains one of the most recognizable combat shotgun loads in history. Whether you’re a collector of U.S. military memorabilia, vintage ammunition, or are building a wartime display, this set offers both historical value and excellent presentation.

Step into the history of World War II with this incredible U.S. Army box of ten M19 12 GA. brass 00 buckshot shotgun shells, manufactured by the legendary Remington Arms. These shells are housed in their original wartime box, complete with clear military labeling and period-correct markings. The brass construction is a standout feature, designed for rugged military use, and the 00 buckshot load was favored for its devastating close-range stopping power. Whether you're a military collector, a shotgun enthusiast, or simply a fan of rare wartime artifacts, this is an authentic piece of WWII firepower that speaks volumes.

This set offers more than just ammunition—it’s a snapshot of American ingenuity and battlefield necessity. Issued to U.S. troops for trench-clearing and defensive roles, the M19 buckshot round played a crucial role in some of the grittiest, close-quarters combat of the war. Remington's wartime production quality is on full display here, and the condition of both the shells and the box makes this a truly remarkable find. Add this to your collection and own a tangible piece of the greatest generation's fight for freedom.

From the esteemed Canfield Collection, this offering includes 20 full boxes of Peters 12 Gauge 00 Buckshot, each containing 25 shells, totaling 500 rounds, all neatly housed in an original Peters Cartridge Company wooden shipping crate measuring approximately 15" x 9" x 9". These shells were produced by Peters Cartridge Company, one of the major ammunition manufacturers supplying commercial and government markets during the WWII era. Though this crate is a commercial Peters crate, the shells themselves are of the type issued for military use during the war, particularly for trench and riot shotguns like the Winchester Model 1897 and Model 1912. Each box remains in well-preserved condition, with crisp labeling and visible markings consistent with 1940s production. The wooden crate is a collectible in its own right, bearing bold Peters branding on the side panels, and showing honest wear and age-related patina. Its compact size and authentic vintage construction make it an excellent display piece.

US Army troops and US Marines in Vietnam were issued the classic 18" blade M-1942 machete for clearing brush and fields of fire, and if necessary, use as a last resort weapon. This US Army Vietnam Ontario M-1942 Jungle Machete is in Excellent Condition, with some light scratching, scabbard wear, and patina at each side of the blade, some patina to the left side of the metal handle scale rivets, and with some light scattered age wear evident. Most interestingly, it features a 17 7/8" blade that retains approximately 90% of the crisp, original parkerized finish, sports the classic black plastic handle scales with the protruding bottom, and is "U.S" stamped in inverted fashion at the ricasso, along with its maker, the famous "ONTARIO KNIFE CO.", marked vertically along the lower left side of the blade. It’s complete with an original US Army WW2 M-1942 Machete OD Canvas Scabbard in Good Condition, with some scattered fading, brownish soiling, and dark spot soiling at front and back, some fading to the markings at the upper back, remaining a tight fit for the machete, with the last quarter length having to be shimmied in, and still remaining about 3/8” too short to fully accept the blade, and with some overall age wear evident. Most interestingly, it bears the classic darkened brass reinforced throat, carries a fully intact darkened brass wire hanger at the upper back, and is faintly “U.S.” marked at the upper back, along with its maker and date, “AVERY 1943”. The set is a fine example of a rare, original US Army Vietnam Ontario M-1942 Jungle Machete. Lastly, this machete and scabbard come directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this set.

The US Army introduced the M-3 trench knife in 1943 for troopers carrying arms not configured to accept a bayonet. The wide use of Thompsons and Carbines by paratroopers meant the M-3 was issued in large numbers to those elite airborne troops. Often worn strapped to the calf, the M-3 trench knife quickly became part of the paratrooper mystique, and a symbol of those "devils in baggy pants". This US Army WW2 D-Day Paratrooper Airborne Camillus Blade Dated M-3 Trench Knife is in Excellent Condition, with a bit of sharpening to the blade edge, a bit of scratching at each side of the blade, some loosening to the guard, a few small nicks in the upper right side of the handle, and with some light scattered age wear evident. Most interestingly, it features a 6 11/16" spearpoint blade with the classic top false edge that retains approximately 95% of the crisp, original parkerized finish, sports a beautiful stacked leather washer "tootsie roll" handle, and is marked "US M3" at the lower right side of the blade, along with its maker, the famous "CAMILLUS", and the date, “1943”. Blade dated M-3 trench knives, especially in this condition, are very rare and difficult to acquire today. It boasts the familiar "thumb rest" bend in the top end of the steel guard, carries the traditional "flaming bomb" acceptance stamp of the Ordnance Department at the bottom of the two pin steel pommel, and is complete with the original US Army WW2 D-Day Paratrooper Airborne Unmarked M-6 Brown Leather Scabbard in Excellent Condition, remaining a bit too small to fully accept the blade, resulting in a small gap between the throat and guard, and with some light crazing at each side of the handle retention strap, a fingernail shaped dark line in the lower left front belt hanger, and with some light scattered age wear evident. Most interestingly, it's unmarked as to its maker or date, boasts the classic 8 metal "staples" at the front throat, and sports darkened metal rivets and white cotton stitching down the sides, a metal reinforcement plate at the front and back end tip, a darkened brass tie down grommet at bottom, and a fully functional darkened metal "glove" snap closure leather handle retention strap at the middle front belt hanger. It’s crafted of gorgeous brown leather, exhibits a fully intact darkened metal wire hanger in a riveted and sewn channel at the top reverse, and the set is a beautiful example of a very rare, original US Army WW2 D-Day Paratrooper Airborne Camillus Blade Dated M-3 Trench Knife.

The US military saw the success of German paratroopers in 1940, and quickly set about creating its own elite airborne units. US paratroopers jumped on Sicily in Operation Husky in 1943, dropped into Normandy during the D-Day invasion in 1944, fought through the hedgerows of France until the breakout at St. Lo, jumped on Holland in the ill-fated “bridge too far” attempt of Operation Market Garden, held the line at Bastogne during the “Battle of the Bulge”, and “jumped over the Rhine” in Operation Varsity in March 1945. Their exploits were legendary. US paratroopers of WW2 were all volunteers, pushed to top levels of physical fitness, mental toughness, and esprit de corps by rigorous jump training, and they played a pivotal role in the Allied victory. Those "devils in baggy pants" were issued the classic M-2 “press button” jump knife to be carried in the small zippered pocket at the upper left front placket of the jump jacket. The knife was designed to allow a paratrooper to cut tangled shroud lines if his parachute became ensnared in a tree, or if he dropped into a body of water, the latter a terrifying scenario made all the more possible on D-Day once Rommel ordered the fields of Normandy flooded in anticipation of an Allied airborne landing. The earliest M-2 jump knives were made by Schrade Cut Co. of Walden, New York, and featured genuine jigged bone handle scales with no hanging bale. This US Army WW2 D-Day Paratrooper Airborne Schrade Cut Co. Early M-2 Press Button Jump Knife is in Good Condition, with some light side to side loosening to the blade when in the open and locked position, some light rounding to the blade tip, some sharpening to the blade edge, some light chipping to the upper blade edge, some cleaning, scratching, and pitting at each side of the blade, some cleaning, scratching, and pitting to the spine of the handle, a small chip in the lower right side of the left handle scale, missing the pin from the top left handle scale, and with some overall age wear evident. Most interestingly, it features a 3 3/4” bright clip point bowie blade with a fully functional press button opening and closing mechanism, sports elegant genuine jigged bone handle scales each secured by 5 metal pins (the left scale only has 4 remaining as mentioned), and is stamped at the ricasso with its maker, the famous “SCHRADE / CUT. CO. / WALDEN, N.Y.”, along with 4 lines of patent information marked at the reverse ricasso. It boasts a fully functional slide lock mechanism (when slid up the press button is locked, when slid down the press button is unlocked), exhibits no hanging bale, distinguishing it as a scarce early piece, and is a fine example of a very rare, original US Army WW2 D-Day Paratrooper Airborne Schrade Cut Co. Early M-2 Press Button Jump Knife.

This listing offers a Vintage Distinguished Service Cross (DSC) Medal, complete with its original bar pin back and housed in a period display case. The Distinguished Service Cross is the second-highest military decoration awarded to members of the United States Army, presented for extraordinary heroism in combat. Acts recognized by this The ribbon remains bright and vibrant, with its traditional red, white, and blue vertical stripes well-preserved. There is only minimal fading, and no fraying is visible along the edges. The medal has not been polished, retaining its original bronze patina and crisp detail throughout. The bar pin attachment is tight and original to the medal, contributing to its overall integrity and authenticity.

This lot includes two original U.S. Silver Star medals, each with its matching bar pin and housed in its own vintage display case. The Silver Star is the third-highest combat decoration awarded by the U.S. Armed Forces for gallantry in action against an enemy. These medals feature the classic gilt-bronze five-pointed star with a silver center star, suspended from red, white, and blue ribbon drapes. Both medals retain their original finish, show light age patina, and include functional bar-style suspension pins.

The vintage military display cases are leatherette with gold trim, lined in satin and velvet. The interiors are clean and fitted, while the exteriors show light scuffing and wear, consistent with age. Hinges and clasps remain functional.

Although unnamed, these medals appear to date from the WWII–Vietnam War period based on their design and construction. They are complete, authentic, and well-preserved these are ideal for collectors, historians, or those honoring family service.

This lot offers a strong opportunity to own two of the most respected awards in U.S. military history. These Silver Stars represent courage, sacrifice, and distinguished service in combat.

Make: Springfield Armory

Model: M1D Garand, CMP Service Grade

Serial Number: 2146922

Year of Manufacture: November, 1943, Barrel Date August, 1952

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Markings:

Receiver- “U.S. RIFLE / CAL. .30 M1 / SPRINGFIELD / ARMORY / 2146922”

Trigger Group- “D28290-12-SA”

Safety- "C46015-9SA"

Hammer- “C46008-5 SA”

Receiver Leg- “B 1 6", diamond, "D28291 30"

Op Rod- “D35382-W.R.A.”

Barrel- "A", "T", "P" (twice), "S-A-8-52"

Bolt- “6528287 - SA / US1”

Stock- grip with a “P”, left with "RA" and "S.A" in box cartouches.

Rear Sight- "DRC"

Cheek Pad- "MRT / 1 52"

Barrel Length: 24”, 26 1/2" to the front of the installed Hart Mfg. Co. Hider Flash M2.

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings. An M84 scope is installed on the barrel block.

Stock Configuration & Condition: The wood stock has a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (nothing in compartment). The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate shows scattered light wear. There are a few scattered compressions, but no notable damage. There are no chips or cracks. Overall the stocks are in about Fine condition as refurbished.

Type of Finish: Parkerized

Finish Originality: Arsenal Refurbished

Bore Condition: The bore is mostly bright with sharp rifling. There is no erosion in the bore, but there is a little copper fouling. Our gauges show an ME of about 1 and a TE of about 1.5. In this writer's opinion the bore rates 9/10.

Overall Condition: The rifle retains 96% of its metal finish. The finish is generally strong. There is handling wear on the charging handle. The finish is thinning at some edges. There are a few other scattered minor marks. The action shows light operational wear. There is some minor erosion under the finish, primarily on the receiver. The markings are clear. Overall, this rifle is in about Fine condition as Arsenal Refurbished.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included are the installed green canvas sling, M84 scope, Hider Flash M2 and 7-16-97 dated CMP DD Form 1438-1 for the transfer of this rifle as an M1D Service Grade.

Our Assessment: This is a nice example of a genuine M1D Garand sold as a Service Grade by the CMP in 1997. The rifle is built on a 1943 Springfield receiver with mostly Springfield parts. Based on the 1952 barrel and cheekpad dates, it is likely that the rifle was refurbished and possibly converted to the M1D configuration in that year. The rifle is in Fine condition with a strong bore. Every collection needs an M1 Garand and this one could be yours. Please see our photos and good luck!

Make: Springfield

Model: M1A Loaded

Serial Number: 149281

Year of Manufacture: October, 2002 (Verified with Springfield

Caliber: .308 / 7.62X51

Action Type: Semi-Automatic, box magazine fed.

Markings: Rear top of the receiver is marked “US RIFLE M1A SPRINGFIELD ARMORY 149281”. The top of the barrel is marked, “NM.308”. The top of the bolt carrier group is marked “7790186-SA F00071”.

Barrel Length: 22”. 25” with M14 classic long slotted flash suppressor.

Sights / Optics: The front sight is a National Match front sight. The Rear Sight is a Match-Grade Aperture Sight with .0520 aperture, ½ MOA windage and elevation increments.

Stock Configuration & Condition: The stock is the traditional M14 Walnut stock with two sling swivels, semi pistol grip, straight comb, a 13.25 LOP, butt storage compartment and the hinged metal buttplate. The top handguard is brown composite. The stock shows minimal storage wear with a few minor compressions. There are no chips or cracks. The stock is in about Excellent condition.

Magazine Quantity & Condition: None.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no visible erosion in the bore. This rifle appears unfired outside of factory testing. In this writer’s opinion the bore rates 10/10.

Overall Condition: This rifle is in Excellent to Like New In Box condition with only very minor storage wear and the addition of the scope rail.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes with a AA & E Leathercraft leather sling in Excellent condition.

Our Assessment: The Springfield M1A Loaded rifles are a series of semi-automatic rifles that combine the classic design of the M14 with modern enhancements to deliver superior accuracy and performance. These rifles are chambered in .308 Winchester (7.62x51mm NATO) and are renowned for their reliability, accuracy, and versatility. One of the key features of the M1A Loaded series is the National Match barrel, which is designed to provide exceptional accuracy. The barrel is medium-weight and made from high-quality steel. It is air-gauged and meticulously crafted to ensure consistent performance, making it an excellent choice for precision shooting. The M1A Loaded rifles also feature a two-stage National Match trigger, which provides a smooth and crisp trigger pull with a pull weight of around 4.5 to 5 pounds. This type of trigger is highly valued by competitive shooters and marksmen for its ability to enhance accuracy by allowing precise control over each shot. Another notable feature is the match-grade sights. The rear sight is a Match aperture with 0.5 MOA adjustments for both windage and elevation, while the front sight is a National Match front blade. These high-quality sights enable shooters to make fine adjustments and achieve precise aiming, which is crucial for long-range accuracy. In summary, the Springfield M1A Loaded rifles are highly regarded for their blend of traditional design and modern enhancements. With features like the National Match barrel and trigger, match-grade sights, and durable walnut stock, these rifles offer excellent accuracy and reliability. They are suitable for a wide range of applications, including precision shooting, hunting, and competitive marksmanship, making them a versatile and valuable addition to any shooter's collection.

This original 1943 World War II-era placard was issued by the Labor Management Committee as part of a national campaign to curb absenteeism on the home front. Poster #28 in the series, it vividly captures the urgency and patriotic fervor of the time, urging American workers to recognize the critical importance of consistent labor in wartime production. With the war effort hinging not only on military might but also on industrial output, posters like this played a vital role in shaping public behavior and morale.

Framed and measuring approximately 23" by 14", this piece features bold graphics and concise messaging meant to stir a sense of duty among the workforce. “DONT LET THIS BUG GET YOU!” isn’t just a slogan; it reflects the era’s cultural ethos, where attendance at work was directly linked to victory overseas. It’s a striking reminder that the battle was fought not only on the frontlines, but also in factories, shipyards, and assembly lines across the country. This will be excellent in a man cave or a shop as a classic piece of WWII art.

What an outstanding piece of WWII home front history! This original War Production Drive poster, “If the Absentee Bugs Bite You…”, is a vivid reminder of how every worker counted during America’s wartime push. Issued as Bulletin Board Placard No. 27, this poster features a dynamic and eye-catching illustration of a worried worker swatting at cartoonish “bugs” labeled with real-world issues like “Poor Transportation,” “Child Care,” “Illness,” and “Bad Housing.” It calls on workers to speak up about the problems affecting their attendance by contacting their Labor Management Committee—an incredible example of how the U.S. government used clever, approachable artwork to rally industrial support for the war effort. 20” x 13.5”

This isn’t just a poster—it’s a time capsule. Bold colors, punchy design, and a clear message all combine to capture the spirit of wartime collaboration and determination. These posters weren’t just decoration—they were a vital part of the communication strategy that kept America’s factories running and troops supplied. Whether you’re a collector of WWII memorabilia, vintage labor history, or graphic design, this placard is a thrilling and rare find!

Now this is a showstopper! This original World War II propaganda poster, “Keep Him Flying!”, delivers a bold, emotional appeal to the American public during one of the most pivotal times in history. Featuring stunning artwork by artist Schreiber, the poster captures a U.S. fighter pilot climbing into his aircraft with determination in his eyes, backed by a vivid sunrise sky. Below him on the fuselage are six rising sun kill marks—clear victories over enemy aircraft. The message is clear and urgent: by buying war bonds, citizens on the home front play a direct role in keeping America’s warriors in the fight.

This poster is a brilliant example of wartime visual messaging, combining patriotism, urgency, and emotional impact. It wasn’t just about raising money—it was about fueling a nation’s morale and uniting every American behind a common goal. Posters like this were plastered in public spaces, factories, schools, and government buildings across the country, and they remain some of the most iconic and collectible artifacts from the era. With bold color, riveting composition, and a call to action that still resonates, this piece is an absolute gem for any WWII collector or enthusiast!

This striking vintage World War II-era poster, titled “Keep ’Em Coming!”, dates to 1943 and served as a bold call to arms on the home front. Designed as part of the U.S. government's wartime propaganda campaign, this poster encouraged American citizens to contribute not just material goods or labor—but ideas. The message is clear and compelling: everyday people were being asked to share innovations, suggestions, or practical solutions that could benefit the war effort. In a time when national unity and ingenuity were paramount, posters like this one helped harness the creative energy of the public. Professionally framed, this poster measures approximately 20.5 inches by 30 inches overall. The frame is solid and complements the period feel of the piece, offering a clean presentation while protecting this wartime relic. This is more than just wall art—it’s a conversation starter and a preserved piece of history. With its mix of patriotic fervor and civilian empowerment, “Keep ’Em Coming!” reminds us that in times of struggle, innovation and determination can come from anywhere.

Make: Winchester

Model: M1 Carbine

Serial Number: 5634077

Year of Manufacture: February 1944 to November 1944

Caliber: .30 Carbine

Action Type: Semi Automatic rifle fed by Detachable Magazines.

Markings:

The top-rear of the receiver is marked “WINCHESTER TRADEMARK / 5634077”

The top-front of the receiver is marked “U.S. CARBINE”, “CAL .30 M1”.

The barrel is marked on the top 3.25” back from the front sight with “W” and 5.5” back with the “WP”.

The right side of the gas block is marked with a flaming bomb mark.

The barrel band is marked “AI”.

The front sight is unmarked.

The rear sight is marked Shield “H”-Hemphill MFG. Co.

The slide is marked “PI”.- an Inland Type IV Slide

The Trigger group is marked “W” and “O” for Winchester

The magazine release is marked “LT-G”.

The hammer is marked “-U-” for Underwood

The Safety Switch is marked with a circled “W”. - Winchester

The sear is unmarked.

The left side of the stock in the sling cut is marked with a Circled K and “5” - A post war Keystone Stock.

The upper handguard is unmarked.

The oiler is marked “IS”.

Barrel Length: 18”

Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is a later style sliding aperture sight with a knurled windage knob dovetailed to the receiver.

Stock Configuration & Condition: The stock on this rifle is an Oval cut, low wood stock with a four rivet handguard, a type two barrel band, and a lever safety. The LOP is 13 1/8” from the front of the trigger to the back of the buttplate. There is light handling wear. The top left side of the handguard has a long compression line and the front lip for the barrel band has been broken away. There are no visible chips or cracks. The metal buttplate has semi sharp checkering, wear and scratches around the edges, some minor surface rust developing, and has retained most of the finish in the checkering. Overall the furniture on this rifle is in Very Good + to Excellent condition as refinished.

Type of Finish: Parkerized and blued.

Finish Originality: Refinished.

Bore Condition: The bore is very bright and the rifling is defined. There is no visible erosion in the bore. Our gauge shows a muzzle of 1+. In this writer’s opinion the bore rates 9/10.

Overall Condition: This rifle retains 80% of its finish. The bolt and receiver show very little wear on the friction surfaces. The trigger guard has lost finish on the edges, there is wear to the magazine well, the muzzle and front sight wings also show finish loss on the edges. The end of the barrel near the muzzle has some finish thinning and loss. The screw heads are sharp and the markings are clear. Overall this rifle is in Very Good+ condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle includes One 10rd and Two 15rd blued magazines along with a canvas buttstock magazine pouch, canvas sling, and M1 Carbine Canvas Carrying Case.

Our Assessment: This Winchester M1 Carbine, produced in 1944, represents a key period in the development and deployment of this iconic World War II firearm. Winchester, as one of the original contractors tasked with manufacturing the M1 Carbine, played a pivotal role in supplying these lightweight and versatile rifles to U.S. troops. The M1 Carbine offers a blend of historical significance and practical performance. Its lightweight design, paired with the mild recoil of the .30 Carbine cartridge, makes it a joy to handle on the range. Whether used for recreational shooting or as a centerpiece in a collection, this Winchester M1 Carbine embodies the craftsmanship and ingenuity of its era, offering both a tangible connection to World War II history and the reliability expected of a firearm designed for combat use. To better understand this M1 carbine please see our high quality photos.

Make: Underwood

Model: M1 Carbine

Serial Number: 2911530

Year of Manufacture: The receiver was made between July 1943 and February 1944. The barrel date is 12-43.

Caliber: .30 Cal carbine

Action Type: Semi Automatic rifle fed by Detachable Magazines.

Markings:

The top-rear of the receiver is marked “UNDERWOOD / 2911530”.

The top-front of the receiver is marked “U.S. CARBINE”, “CAL .30 M1”.

The barrel is marked with a “P” about 2.5” back from the front sight. The front of the barrel is marked “UNDERWOOD 12-43” with the flaming bomb.

The front sight is stamped with “EU” - A Type II Underwood part

The barrel band is unmarked.

The slide is marked on the inside with “-U-”, an Underwood slide.

The bolt is marked “-U-” for Underwood.

The rear sight is marked “S”.

The trigger group is marked “INLAND”.

The magazine catch is marked “M” and “E.I.” - Inland part

The left side of the hammer is marked “I.K.” for Rock-Ola.

The sear is marked “R.I.” - Inland part.

The Crossbolt Safety is unmarked

The magazine is marked “UQ” - Quality Hardware

The Stock is “IO” inside the sling well. -Inland

The lug is unmarked.

The upper handguard is marked “IO”. - Inland

Barrel Length: 18”

Sights / Optics: The front sight is a Type I fixed blade set between protective ears. The rear sight is a Type I flip aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock on this rifle is an Oval cut, high wood stock with a two rivet handguard, a Type I barrel band and an early cross bolt safety. The LOP is 13 1/8” from the front of the trigger to the rear of the buttplate. This stock has been very lightly sanded and refinished as a result it shows very few marks and lines. There are still some minor lines and compressions. There are no visible chips or cracks. The upper handguard shows a few compressions. The metal buttplate has rub wear around the edges. Overall the stock is in Fine condition.

Magazine Quantity & Condition: This rifle includes one 15 round magazine. The magazine is in Good + overall condition.

Type of Finish: Parkerized / Blued

Finish Originality: Original

Bore Condition: The bore is bright, with well defined rifling and scattered erosion throughout. In this writer’s opinion the bore rates 6/10.

Overall Condition: This rifle retains about 70% of its metal finish. There is minor wear on the friction surfaces of the bolt and receiver. Parts of the slide, band, and receiver have taken a faint patina. There is some scattered erosion on the barrel. The markings are clear. The screw heads are tool marked and serviceable. Overall this rifle is in about Very Good + condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle comes with a total of one magazine.

Our Assessment: The Underwood M1 Carbine is a fascinating example of American ingenuity during World War II, produced by Underwood-Elliott-Fisher in 1943. Underwood, famous for its typewriters before the war, transitioned its precision manufacturing capabilities to support the U.S. military by producing M1 Carbines. This particular example features almost all matching Underwood parts, showcasing the company's ability to deliver complete and reliable firearms during wartime. The barrel, also an Underwood product, is dated 12-43, aligning perfectly with the rifle's production date and further emphasizing the consistency of Underwood’s manufacturing process.

With its near-complete matching Underwood and Inland parts, Underwood barrel, and inland stock, this M1 Carbine is a remarkable piece of military history. The association with Underwood’s legacy as a typewriter manufacturer turned wartime firearm producer makes this carbine even more compelling. It stands as a testament to the adaptability of American industry and the collaborative efforts of contractors and arsenals to supply reliable weapons to soldiers across the globe. This carbine is not only a collector's piece but also a vivid reminder of the critical role American manufacturers played in securing victory during World War II. To better understand this M1 carbine please see our high quality photos.

Make: Irwin-Pedersen

Model: M1 Carbine

Serial Number: 3214163

Year of Manufacture: Receiver 1943, Barrel Date 2-1943

Caliber: .30 Carbine

Action Type: Semi-Auto

Markings:

Receiver: “IRWIN-PEDERSEN 3214163”, “U.S. Carbine CAL .30 M1” and on the left “3”.

Barrel: “UNDERWOOD 2-43” with a flaming bomb, 5.5” back from the front sight there is a “P”, the flat also has a flaming bomb.

Front sight: “N”-IBM

Slide: “S’G’” on the inside. Saginaw Gear

Barrel band: “UP”

Bolt: Unmarked

Rear Sight: “B-IP” and a round “S”. Beckwith MFG CO. correct for Irwin Pedersen

Trigger Group and Hammer: “IP” Irwin Pederson

Safety: “IP-A” American Electric Heater CO. for Irwin Pedersen

Magazine Catch: “B-IP” Saginaw Gear

Sear: “SW-S’G’” Saginaw Gear

Upper Hanguard: “IR-IP” with a flaming bomb. Irwin Pedersen

Stock: Pommel circle “P”, Right flank Ordnance wheel and “SG” in a box, Sling cut: “IR-IP” with a flaming bomb this stock was made by Saginaw Gear for Irwin Pedersen. Just in front of the sling cut is marked “STD PROD RWH” indicating this rifle may have been refurbished or inspected by Standard Products Co as part of a post war inspection.

Lug: Unmarked

Magazine: “SQ SP-SG” Seymore Smith & Sons.

Barrel Length: 18"

Sights / Optics: The front sight is a fixed blade with protective ears. The rear sight is the early L type dual aperture “flip sight” dovetailed to the receiver.

Stock Configuration & Condition: The stock is a low wood, I cut stock with a type one barrel band, two rivet handguard, checkered metal buttplate with an oiler. The length of pull is 13.25”. The stock shows scattered handling wear with compressions and lines. There is a notable scratch on the right side of the nose and a rub mark from the sling. The upper handguard shows minimal wear with no visible chips or cracks. The buttplate shows normal wear with rub marks around the edges. The markings on the stocks are surprisingly clear. Overall this stock is in Very Good+ condition.

Magazine Quantity & Condition: One 15 round magazine in Excellent condition.

Type of Finish: Parkerized

Finish Originality: Original.

Bore Condition: The bore is bright and the rifling is defined. There is minor erosion present with pitting in the last third of the bore. In this writer’s opinion the bore rates 7.5/10.

Overall Condition: This rifle retains about 97% of its original metal finish. The metal surfaces have turned dark green with age. The bolt shows minor rub wear on the friction surfaces. The barrel shows some finish thinning and small marks scattered throughout with some finish loss of the leading edges. The markings are clear and the screw heads are sharp. Overall this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: One magazine and a green canvas sling.

Our Assessment: The Irwin Pedersen M1 Carbine is one of the rarest and most collectible variants of the WWII era carbine, as the company produced only a small number before its contract was canceled due to failure to meet military standards. This example was completed by Saginaw Gear in early 1943, after Saginaw took over Irwin-Pedersen’s Grand Rapids facility. It features an Underwood barrel, with most of the trigger group components still Irwin Pedersen made, and a few parts sourced from Saginaw and Saginaw’s subcontractors. The rifle includes a Saginaw Gear and Irwin Pedersen marked stock. The stock also bears a Standard Products Co. post-war inspection stamp, indicating it was likely inspected and tested by the private contractor after WWII.

Irwin Pedersen was originally contracted to produce over 100,000 carbines but delivered fewer than 3,500 units. These units failed to meet the standards and as a result the U.S. government reassigned the factory to Saginaw. This led to many of the carbines being completed by Saginaw using Irwin-Pedersen parts. These Irwin produced Saginaw completed rifles are highly sought after today especially with the Standard Products Co. inspection stamp. These rifles represent a unique moment in wartime production history, showcasing the challenges of scaling up manufacturing quickly under the pressure of war. A carbine like this, blending Irwin-Pedersen rarity with Saginaw completion and post war inspection history, is a fascinating, rare and valuable piece indeed.

Make: Winchester

Model: M1 Carbine

Serial Number: 1140573

Year of Manufacture: Early 1943

Caliber: .30 Carbine

Action Type: Semi Auto.

Markings:

Receiver: “WINCHESTER TRADEMARK / 1140573”, and “U.S. CARBINE”, “CAL .30 M1”.

Barrel: The top of the barrel is marked “W” 3.25” back from the front sight and “WP” 5.5” back. The right side of the barrel above the gas block is marked with a flaming bomb inspection stamp. The right side of the gas block is marked with a flaming bomb stamp.

Front Sight: “NN” Nolan Machinery CO.

Barrel Band: Unmarked

Rear sight: “WSI” Wadsworth Watch Case Co.

Slide: unmarked

Trigger group: “W” and “J” for Winchester

Magazine release: Very faint “WI” Wadsworth Watch Case

Hammer: “WU” Universal Winding CO.

Safety: “EW” for Sargent & CO.

Stock: The sling cut is marked “W” for Winchester, the inside of the stock “V”, pommel square outlined “P”. The right flank is marked “W.R.A. G.H.D.” with an ordnance wheel. The right wrist is marked “USAA1” indicating a San Antonio Armory rebuild or inspection.

Lug: “W” for Winchester

Upper handguard: “W” for Winchester and “Z”

Barrel Length: 18”

Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is the early style “L” type dual aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock on this rifle is an Oval cut, low wood stock with a two rivet handguard, a type one barrel band, and a crossbolt safety. The LOP is 13.25” from the front of the trigger to the back of the buttplate. The stock shows scattered marks and wear with one notable chip in the leading edge of the pommel. The upper handguard shows similar wear with a small crack originating from the left side rivet and a compression on the right side. The buttplate retains its checkering with scuffmarks around the edges minor finish loss and minor oxidation. Overall the furniture is in about Good + condition.

Type of Finish: Parkerized and blued.

Finish Originality: Original.

Bore Condition: The bore is very bright with well defined rifling. There is no visible erosion. In this writer's opinion the bore rates 9.75/10.

Overall Condition: This rifle retains 96% of its finish. The metal finish has turned brown with age. The bolt and receiver show minor wear on the friction surfaces. The trigger guard has lost finish on the edges, the muzzle and front sight wings also show finish loss on the edges with some minor finish thinning on the barrel. The end of the barrel near the muzzle has some minor finish thinning. The screw heads are sharp and the markings are clear with the exception of the magazine catch. Overall this rifle is in Good+ to Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: Includes one SW marked magazine in Excellent condition, an oiler and a green canvas sling.

Our Assessment: This Winchester M1 Carbine, made in early 1943 during the first production run, is a highly collectible WWII rifle from one of the most sought-after manufacturers. This example features a low wood stock, correctly marked "WRA GHD" for Winchester Repeating Arms and Guy H. Drewry, the U.S. Ordnance officer who inspected Winchester’s carbines. It retains mostly Winchester parts, with some components sourced from Wadsworth Watch Case Co., a known wartime subcontractor. The stock is also marked "USAA1," indicating a rebuild or inspection at San Antonio Arsenal, adding to its service history. The L-type dual aperture sight is correct for early production, maintaining the carbine’s original battlefield configuration.

As one of the original M1 Carbine producers, Winchester was the only private company contracted to both design and manufacture the rifle, making its examples highly desirable. The M1 Carbine was prized for its lightweight design, semi-automatic action, and versatility, serving officers, paratroopers, and support troops across all WWII theaters. This early production Winchester, with its correct mix of parts and original markings, is a fine historical example, reflecting the urgency and craftsmanship of America’s wartime production.

Make: Inland Division of General Motors

Model: M1A1 Paratrooper Carbine

Serial Number: 5376535

Year of Manufacture: Receiver January-August 1944. Barrel Date 7-1944

Caliber: .30 Carbine

Action Type: Semi-Automatic

Markings: Receiver is marked, “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 5376535”.

Barrel: on the flat is stamped with the Inland Hieroglyphics, “P” 5” back from the front sight. The barrel is marked “INLAND MFG. DIV. GENERAL MOTORS 7-44”

Front sight: “N”-International Business Machine part

Barrel band: “II” for International Silver Co.

Slide: “7160091 Q” and “PI” on the inside. For Packard Inland.

Rear sight: with a square corner “S” on the left side most likely a Saginaw Gear sight.

Bolt: unmarked.

Trigger group: “INLAND”.

Magazine release: “M”

Crossbolt safety: unmarked.

Hammer: “I-I” for International Silver CO.

The oiler: “BK” post war oiler made by Poley Bros.

Upper handguard: “IO” for S.E. OVERTON CO.

The inside of the stock is marked “IO” for Inland Overton, The front of the pistol grip is marked with a “P”, the bottom of the pistol grip is marked with a small ordnance wheel and “RI3” for Richardson, correct for Inland. The stock has the correct steel rivets. The metal buttplate is marked “B257614”, the pie emblem, and “7” all of these markings are correct for an M1A1 Stock. The left side of the stock is also marked “AAF” indicating an Augusta Arsenal rebuild.

Barrel Length: 18"

Sights: The front sight is a fixed blade set between protective ears. The rear sight is the early style “L” type dual aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock is a real M1A1 paratrooper stock with a folding wire frame stock, leather cheekpiece, pistol grip, type 2 barrel band, and crossbolt safety. The length of pull is 13” from the trigger to the buttplate. The upper handguard shows only minor handling wear with no visible chips or cracks. The stock shows handling wear scattered throughout with the characteristic rub mark from the buttplate. The stock has two small cracks forming from the rear lug one on either flank of the stock with a small chip out of the rear of the right side chip where it meets the lug. The stock folds correctly and the spring on the buttplate is strong. This stock is in Good to Good+ condition and would rate in Very Good+ to Excellent condition if not for the cracks.

Magazine Quantity & Condition: One 15 round magazine marked “U”. The magazine is in Very Good condition with some minor surface rust on the nose.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is very bright, with defined rifling. The bore shows lines and marks from use. There is some minor pitting towards the last third of the bore. In this writer's opinion the bore rates 8.75/10.

Overall Condition: This rifle retains about 98% of its metal finish. The finish has turned brown / green with age. The action and round bolt show minor wear on the friction surfaces from use. The muzzle and sight wings show some slight finish loss as well. The markings are clear and the screw heads are sharp. Overall this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This carbine includes the magazine and a green canvas Paratrooper M1A1 case.

Our Assessment: This Inland Division M1A1 Paratrooper Carbine, made in July 1944, is an iconic folding-stock variant of the M1 Carbine, designed specifically for U.S. Airborne forces during World War II. This example retains almost all correct original parts and its original finish, with the few replaced components likely swapped at Augusta Arsenal, as indicated by the "AAF" marking on the stock. Inland, a division of General Motors, was the primary producer of the M1A1, manufacturing over 140,000 units between 1942 and 1945. Featuring a 15-round detachable magazine, a short 18-inch barrel, and a folding metal stock, the M1A1 was lightweight, compact, and well-suited for paratroopers who needed a reliable, easily transported rifle when jumping into combat. An original, arsenal-refurbished Inland M1A1 like this one is a prized piece of history, representing the bravery and ingenuity of American paratroopers in World War II.

Make: Inland Division of General Motors with a Saginaw Gear made receiver.

Model: M1 Carbine

Serial Number: 917878

Year of Manufacture: Receiver Late 1943, Barrel Date 10-43.

Caliber: .30 Carbine

Action Type: Semi-Automatic

Markings:

Receiver: “U.S. CARBINE CAL. 30 M1 / INLAND DIV. 917878” below the wood line on the left hand side “SG”, the bottom of the receiver is marked with an “R” & “G”.

Barrel: on the flat is stamped with the Inland Hieroglyphics, Top of the barrel is marked “P” about 5” back from the front sight. The end of the barrel is marked “INLAND MFG. DIV. / GENERAL MOTORS / 10-43”. The top of the chamber “3”.

Front Sight: “N” IBM Part

Barrel band: Unmarked

Slide: “PI” on the inside-Packard Inland

Bolt: Unmarked

Rear Sight: “S” with rounded corners.

The trigger group is marked “INLAND”

Hammer: “NI” National Cash Register Co. correct for Inland.

Safety: Unmarked

Sear: “R.I.”

Magazine Catch: “EI” for Eaton Pond Co.

Upper Handguard: “IO” Inland Overton

Stock: Circle “P” on the pommel, sling cut “IO” for Inland Overton, Right flank marked with a large ordinance wheel.

Barrel Length: 18"

Sights / Optics: The front sight is a fixed blade set between protective ears. The rear sight is the early style “L” type dual aperture sight dovetailed to the receiver.

Stock Configuration & Condition: The stock is an Oval cut, high wood stock, with a two rivet handguard, type one barrel band, cross bolt safety and a checkered metal Buttplate. The LOP measures about 13” from the front of the trigger to the back of the buttplate. The wood shows handling wear scattered throughout with a notable series of scratches on the left side just behind the nose. The leading edge of the pommel has several chips and there is a horizontal crack forming on the right flank just below the charging handle. The upper handguard shows light handling marks with one notable depression on the left edge of the sighting groove. The metal butt plate has semi-dulled checkering, has turned brown with age, and shows pitting from oxidation. Overall the stock is in Good+ condition.

Magazine Quantity & Condition: One 15 round “KI” marked magazine. The magazine shows surface rust freckling in the bluing. Overall the magazine is in good condition.

Type of Finish: Parkerized / Blued

Finish Originality: Original

Bore Condition: The bore is very bright with well defined rifling. There is no visible erosion. In this writer's opinion the bore rates 9.75/10.

Overall Condition: This rifle retains about 98% of its metal finish. The magazine catch, bolt, and friction surfaces of the receiver show the majority of wear with the bolt a small portion of its finish. Most of the metal surfaces have turned green/brown with patina and age. The barrel has a few small nicks in the finish. The screw heads are sharp and the markings are clear. Overall, this rifle rates in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This rifle includes the magazine and a sling.

Our Assessment: This Inland Division M1 Carbine, made in October 1943, is a classic WWII-era rifle, highly sought after by collectors for its historical significance and production pedigree. This example features a High Wood stock, an SG-made receiver, and almost all correct parts with its original finish, making it a well-preserved piece. Notably, it includes a Packard Inland slide and a National Cash Register hammer, components sourced from Inland’s network of subcontractors during wartime production. The L-type aperture sight is correct for mid-1943 production, maintaining the rifle’s original battlefield configuration. The bore rates 9.75/10, indicating exceptional rifling and minimal wear, making this carbine a top-tier example of a wartime Inland.

The M1 Carbine was a lightweight, semi-automatic rifle issued to troops needing a more compact weapon than the M1 Garand, including paratroopers, officers, and support personnel. Inland, a division of General Motors, was the largest producer of M1 Carbines, ensuring their widespread use across all major WWII theaters. This Inland example, with its correct mix of wartime parts and original finish, represents a fine collectible piece, showcasing the durability and effectiveness that made the M1 Carbine a critical tool for U.S. forces in World War II and beyond.

Make: Remington Rand

Model: 1911A1

Serial Number: 1426734

Year of Manufacture: March 1944, C&R

Caliber: .45 ACP (Automatic Colt Pistol)

Action Type: Semi-Automatic, Single Action, Fed by Detachable Magazine

Markings: The left side of the slide is marked “REMINGTON RAND INC. / SYRACUSE, N.Y. U.S.A.”. The frame is marked “UNITED STATES PROPERTY / NO. 1426734” and “M1911A1 U.S. ARMY”. The left side of the frame bears the Ordnance inspector’s mark “FJA” (Frank J. Atwood) below the slide stop, with a “P” proof mark near the magazine release. The right side of the frame has the Ordnance Department’s crossed cannons emblem behind the grip. The top of the slide has a “P” proof in front of the rear sight. The barrel is marked “HS” and “P” on the lug.

Barrel Length: 5”

Sights / Optics: The front sight is a fixed blade. The rear sight is a dovetail-mounted square-notch.

Stock Configuration & Condition: The grips are a pair of checkered brown plastic panels with reinforcing rings around the screws and interior reinforcing ribs. The grips show minor handling wear with light flattening to the checkering. There are no chips or cracks. The grips rate in about Very Good to Fine overall condition.

Magazine Quantity & Condition: One 7-round .45 ACP magazine, marked “R” on the toe, in Good condition with minor surface wear.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This pistol retains about 90% of its parkerized finish. The balance of the finish shows general edge wear, some light handling marks, and minor thinning at typical contact points including the front strap, muzzle, and high points of the slide. There are faint drag lines from the slide stop and safety. The screw heads are sharp. The pins are clean. The markings are sharp and clear. Overall, this pistol rates in about Very Good condition.

Mechanics: The action functions correctly. We did not fire this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Remington Rand 1911A1 pistols are among the most iconic American military sidearms of the 20th century. Produced during World War II, these pistols were designed to meet the urgent wartime need for reliable handguns and are now highly sought after by collectors. Remington Rand became the largest producer of 1911A1s during WWII, delivering approximately 877,000 units from 1943 to 1945.

This particular example, made in March 1944, bears all the hallmarks of a correct Remington Rand including the “FJA” inspector mark, “P” proofs, and correct Keyes Fiber grips. Its original parkerized finish and wartime features remain intact, and the bore is excellent—making it desirable both for historical collectors and shooters.

For collectors of U.S. military firearms, especially WWII-era pieces, this Remington Rand 1911A1 is a strong example with honest wear, correct configuration, and no import marks. It would make a fine centerpiece in any collection, a great shooter, or a worthy display item for those honoring the Greatest Generation.

This lot contains assorted original tools and accessories for the U.S. Military M1 Carbine. Items include bolt disassembly tools, gas piston nut wrenches, sight adjustment tools, cleaning rods, combination tools, chamber brushes, and related small parts. Condition varies from good to very good, showing standard age and use. Ideal for collectors, gunsmiths, or enthusiasts seeking authentic accessories to accompany their M1 Carbine or complete a historical firearm display.

The short-stroke gas piston action of the M-1 Carbine, so the legend goes, was invented by federal prisoner David Marshall “Carbine” Williams in the late 1920s, and he was paroled for this service to his country. Williams was hired by Winchester in the late 1930s, and his refined designs were developed into the M-1 Carbine, which was adopted at the beginning of WW2 and produced by Winchester along with 9 other companies. The earliest stocks for the M-1 Carbine featured an “I cut” in the right side of the butt stock for the oiler, as well as the traditional “high wood” at middle which would cover the operating handle. This US Army WW2 M-1 Carbine I Cut High Wood Type 1 "NPM FJA" Walnut Stock is in Very Good Condition, with a small chip in the top right rear edge where the receiver would meet the stock, a bit of fading to the “NPM” portion of the inspector’s mark, missing the front band and locking spring, missing the recoil plate, missing the buttplate, and with some scattered spot darkening, spot chipping, and age wear evident. Most interestingly, it bears the classic Type 1 “I cut” in the right side of the butt stock and “high wood” at middle which would cover the operating handle, carries “NPM / FJA” (National Postal Meter, inspector Colonel Frank J. Atwood) in a square stamped at the right side of the butt stock, along with the original Ordnance Department “wheel and crossed cannons” cartouche, and is marked “TRIMBLE / TN” in the sling well at the left side of the butt stock, denoting manufacture by Trimble Nursery & Furniture Co. of Rochester, NY (the company that made stocks for NPM). There is no M-2 modification cut on the inside. This is a scarce stock in wonderful shape, and likely dates to late 1942, early 1943. It’s complete with the original, matching “TN” (for Trimble Nursery) marked early 2-rivet walnut handguard, and is a fine example of a very rare, original US Army WW2 M-1 Carbine I Cut High Wood Type 1 "NPM FJA" Walnut Stock. Lastly, this stock set comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

The short-stroke gas piston action of the M-1 Carbine, so the legend goes, was invented by federal prisoner David Marshall “Carbine” Williams in the late 1920s, and he was paroled for this service to his country. Williams was hired by Winchester in the late 1930s, and his refined designs were developed into the M-1 Carbine, which was adopted at the beginning of WW2 and produced by Winchester along with 9 other companies. It was issued with a specially designed canvas sling with distinctive "C-tips" at each end. This US Army WW2 M-1 Carbine "C-Tip" Khaki Canvas Sling is in Very Good Condition, with some scattered orangish brown spot soiling to the canvas, some scattered patina to the metal hardware, and with some light overall fading and age wear evident. Most interestingly, it boasts a fully functional darkened brass "lift-the-dot" closure at top, sports both of the original, fully intact metal "C-tips", and features the original metal slide adjuster at the upper middle. A fine example of a rare, original US Army WW2 M-1 Carbine "C-Tip" Khaki Canvas Sling. Lastly, this sling comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will be included.

The short-stroke gas piston action of the M-1 Carbine, so the legend goes, was invented by federal prisoner David Marshall “Carbine” Williams in the late 1920s, and he was paroled for this service to his country. Williams was hired by Winchester in the late 1930s, and his refined designs were developed into the M-1 Carbine, which was adopted at the beginning of WW2 and produced by Winchester along with 9 other companies. It was issued with a specially designed canvas sling with distinctive "C-tips" at each end. This US Army WW2 M-1 Carbine "C-Tip" OD Canvas Sling is in Excellent Condition, with only some light scattered age wear evident. Most interestingly, it boasts a fully functional darkened brass "lift-the-dot" closure at top, sports both of the original, fully intact metal "C-tips", and features the original metal slide adjuster at the upper body. A beautiful example of a rare, original US Army WW2 M-1 Carbine "C-Tip" OD Canvas Sling. Lastly, this sling comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will be included.

The short-stroke gas piston action of the M-1 Carbine, so the legend goes, was invented by federal prisoner David Marshall “Carbine” Williams in the late 1920s, and he was paroled for this service to his country. Williams was hired by Winchester in the late 1930s, and his refined designs were developed into the M-1 Carbine, which was adopted at the beginning of WW2 and produced by Winchester along with 9 other companies. It was issued with a specially designed canvas sling with distinctive "C-tips" at each end. This US Army WW2 M-1 Carbine "C-Tip" Khaki Canvas Sling is in Very Good Condition, with some scattered orangish brown spot soiling to the canvas, some scattered patina to the metal hardware, and with some light overall fading and age wear evident. Most interestingly, it boasts a fully functional darkened brass "lift-the-dot" closure at top, sports both of the original, fully intact metal "C-tips", and features the original metal slide adjuster at the upper middle. A fine example of an original US Army WW2 M-1 Carbine "C-Tip" Khaki Canvas Sling. Lastly, this sling comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield.

This is an original Vietnam War-era U.S. Army M1 Carbine sling, manufactured in 1962 and originating from the esteemed Canfield Collection. Constructed of durable olive drab canvas, this sling features the classic "D-tip" metal tab on one end—an identifying trait of authentic U.S. GI issue slings used in the 1950s through the early Vietnam War period. The OD canvas remains in excellent condition with minimal fading, no fraying, and firm stitching throughout. The metal D-tip is securely attached and retains its original finish. These slings were standard issue for the M1 and M2 Carbines during the Vietnam era, often paired with oiler inserts in the buttstock channel. This example, being part of the Canfield Collection, adds provenance and collector appeal—likely curated by Bruce Canfield, a respected firearms historian known for his extensive work on U.S. military weapons and gear. An ideal accessory for a correct Vietnam-era M1 or M2 Carbine restoration, or for collectors seeking authentic field gear from the early 1960s.

Step into the golden age of American military history with this exciting Lot of 5x U.S. Army WWII M1 Carbine Hand Guards, a must-have bundle for restorers, collectors, and reenactors alike! This set includes four classic 4-rivet hand guards and one desirable 2-rivet variant, all authentic to the iconic M1 Carbines issued during the Second World War. These hand guards are perfect for bringing war-era carbines back to life or preserving the battlefield look of your existing collection. Each piece carries the character and patina of service life, offering a tangible connection to the G.I.s who carried these arms across Europe and the Pacific.

Whether you're sourcing parts for a faithful restoration or hunting down wartime-correct components for a display build, this lot offers incredible value and versatility. The 4-rivet style reflects later war production, while the 2-rivet guard nods to earlier configurations, making this a great mix for any M1 Carbine enthusiast. With original U.S. military manufacture and the scars of service, these guards are more than just parts—they're fragments of living history. Don't miss the chance to pick up this field-ready batch and complete your next project with the real deal!

This lot consists of 16 original WWII-era U.S. Army M1 Carbine 15-round magazines, manufactured by a variety of wartime contractors. The included handwritten list indicates a diverse selection of makers, such as Inland, Rock-Ola, Winchester, Quality Hardware, Underwood, and IBM, among others. Some magazines remain in their original protective wrapping or cosmoline, while others exhibit standard service wear. This is an excellent collector’s set, showcasing the range of wartime production variations for the iconic M1 Carbine.

The short-stroke gas piston action of the M-1 Carbine, so the legend goes, was invented by federal prisoner David Marshall “Carbine” Williams in the late 1920s, and he was paroled for this service to his country. Williams was hired by Winchester in the late 1930s, and his refined designs were developed into the M-1 Carbine, which was adopted at the beginning of WW2 and produced by Winchester along with 9 other companies. This Box of 6x US Army WW2 Rock-Ola "R-O" Marked M-1 Carbine 15x Round Magazines is in Excellent Condition, with all but one of the mags remaining sealed in their original brown wax paper wrapping, and the one that’s been opened with virtually no wear evident to the crisp blued steel construction. Most interestingly, they all boast fully functional followers and fully intact floor plates, carry the maker’s code “R-O” stamped at the lower back spines, denoting manufacture by the famous Rock-Ola, and come in a 1950s US Army issue M-1 Carbine accessories kit cardboard box. A beautiful example of a rare, original Box of 6x US Army WW2 Rock-Ola "R-O" Marked M-1 Carbine 15x Round Magazines. Lastly, this box of mags comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will be included.

This is an absolutely incredible piece of World War II history! This original U.S. Military wooden ammunition crate was built to carry 600 rounds of .30 Carbine Ball M1 ammunition, packed in 10-round clips with bandoliers, ready to supply troops in the heat of battle. The markings are still bold and legible, showcasing the unmistakable military stenciling that identifies its purpose and wartime origin. The rugged wooden construction, reinforced with metal straps, was built to endure the harshest conditions, from supply depots to the front lines. It even features the ordnance flaming bomb insignia, adding to its authenticity as a genuine WWII artifact.

For collectors, historians, and reenactors, this crate is an absolute must-have. Whether displayed alongside an M1 Carbine, repurposed for storage, or simply admired as a conversation-starting relic, it brings a tangible connection to the soldiers who once relied on its contents. The aged wood, patina, and military stamps tell a story of wartime logistics and battlefield necessity. These crates are becoming increasingly scarce, especially in this kind of well-preserved condition, making it a fantastic addition to any military collection!

Make: Springfield Armory

Model: M1 Garand, assembled to M1D-like configuration.

Serial Number: 3353634

Year of Manufacture: November 1944, Barrel Date: October, 1952, Refurbished: August, 1965

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Markings:

Receiver- “U.S. RIFLE / CAL. .30 M1 / SPRINGFIELD / ARMORY / 3353634”

Trigger Group- “D28290-14-SA”

Hammer- “C46008 7 SA”

Safety- “SA”

Receiver Leg- “A 1 7 A", "F", "D 28291 35", hand-scribed "BA4 / 8-65" (Anniston rebuild)

Follower: "12"

Op Rod- “35382 9 SA”

Barrel- “S-A-10-52"

Bolt- “D28287-19SA / B-16-B”

Stock- "S.A. / NFR", "S.A.", circle "P" cartouches, brass plate at toe marked "17".

Rear Sight- "DRC", white paint "17"

Barrel Length: 24”, 27 1/2" to the front of the detachable flash hider.

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings. A block has been installed on the barrel for the custom scope mount using an M1C pattern Griffin & Howe mount holding an M84 scope.

Stock Configuration & Condition: The stocks are smooth wood with a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (oiler bottle with tool and cleaning rod kit in compartment). The rear handguard has been shortened for the block, the barrel is cut for the standard-length end-cap. A leather cheekpad is installed on the stock. The LOP measures 13” from the front of the trigger to the back of the buttplate. The stocks have some light nicks, scuffs and scratches. There is a chip on the edge of the op-rod slot in the forward handguard. Overall the stocks are in Very Good condition as refurbished.

Type of Finish: Parkerized

Finish Originality: Refurbished, altered to current configuration.

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion in the bore. Our gauges show an ME of about 2 and a TE of about 5. In this writer's opinion the bore rates 6+/10.

Overall Condition: The rifle retains 90% of its current metal finish. The finish is generally strong with some scattered nicks, scuffs and small scratches. The action shows operational wear. The markings are clear. Overall, this rifle is in Very Good condition as assembled.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: The rifle comes in a green canvas zipper case with a canvas scope case, scope tool, "MRT" marked leather sling, installed "MRT" marked cheekpad, installed flash hider and scope, bandoleer with six loaded en-block clips, green cavas web-gear rig with 10 ammo pouches, each with a loaded en-bloc clip, M1 cleaning rod kit in canvas pouch and a packaged small battle dressing in canvas pouch.

Our Assessment: This M1 Garand is quite the interesting piece. It is built on a 1944 Springfield receiver refurbished at Anniston in the 1960s with nearly all Springfield made parts. Its 1952 vintage barrel has been fit with a scope block for a M1D-like scope mount, though the M84 scope is in an M1C-style Griffin & Howe mount assembly. The installed flash suppressor is very interesting, facing directly onto the barrel instead of plugging into the front of the gas cylinder. The result is a very intriguing example of the M1. Every collection needs a Garand, and this one could be yours. Please see our photos and good luck!

Make: Harrington & Richardson

Model: M1 Garand

Serial Number: 5638957

Year of Manufacture: 1955

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Markings:

Receiver- “U.S. RIFLE / CAL. .30 M1 / H.&R. ARMS CO. / 5638957”

Trigger Group- “6528290 - HRA N”

Hammer- “HRA 5546008”

Safety- “HRA”

Receiver Leg- “S / 6528291"

Op Rod- “6535382 HRA”

Barrel- “HRA 6535448 5 55 RS52", "X", "M" and with an Ordnance eagle.

Bolt- “6528287 HRA / .U.”

Stock- left Ordnance eagle in box, and the grip with a circle “P”.

Rear Sight- "HRA-W"

Barrel Length: 24”

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings.

Stock Configuration & Condition: The wood stock has a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (combo tool with brush in compartment). The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate shows scattered light wear. The stocks show light handling wear with some scattered nicks and scuffs. There are no chips or cracks. Overall the stocks are in Very Good-plus condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright with sharp rifling. There is no erosion in the bore. Our gauges show an ME of about 1.75 and a TE of about 2. In this writer's opinion the bore rates 9/10.

Overall Condition: The rifle retains 96% of its metal finish. The finish is generally strong throughout with some scattered minor scuffing and a few small scratches. The action shows minor operational wear. The markings are clear. Overall, this rifle is in Fine condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included are the installed green canvas sling and the combo tool in the buttstock.

Our Assessment: This Harrington & Richardson M1 Garand, manufactured in 1955, is a fine example of the classic rifle, especially when found with all H&R parts as in this example. H&R was one of only two private contractors to produce the M1 Garand after WWII, the other being International Harvester. They were awarded a contract to produce rifles in 1952, during the Korean War, but were only able to produce 500 rifles in 1953 when the war ended. Their production would continue through 1956 with about 450,000 rifles total. A correct, all-H&R M1 Garand like this represents an interesting piece of American military history and showcases the craftsmanship and industrial effort in the U.S. post-WWII. Please see our photos and good luck!

Make: Harrington & Richardson

Model: M1 Garand

Serial Number: 5622169

Year of Manufacture: Ca. 1955

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Markings:

Receiver- “U.S. RIFLE / CAL. .30 M1 / H.&R. ARMS CO. / 5622169”

Trigger Group- “6528290 - HRA N”

Hammer- “C46008 7 SA”

Receiver Leg- “6528291", hand-scribed "BA4 / 8-65" (Anniston rebuild marking)

Op Rod- “6535382 SA”

Barrel- “SA 6535448 2 65 Y78", "P", "M" and with an Ordnance eagle.

Bolt- “6528287 - SA / US1”

Stock- grip with a “P”.

Rear Sight- "BME"

Barrel Length: 24”

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings.

Stock Configuration & Condition: The wood stock has a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (oil bottle, tool and cleaning rod assembly in compartment). The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate shows scattered light wear. The forward handguard has only light handling marks. The rear handguard and stock show scattered nicks, dings and scuffs. There is a pin-repaired crack on the top-left edge of the buttstock below the receiver. There is a crack at the right-rear of the butt. There are a few open grain-lines. Overall the stocks are in Good-plus condition as refurbished.

Type of Finish: Parkerized

Finish Originality: Arsenal Refurbished

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore. Our gauges show an ME of about 1.75 and a TE of about 2. In this writer's opinion the bore rates 8/10.

Overall Condition: The rifle retains 90% of its metal finish. The finish is generally strong. There is some scuffing on the gas cylinder and front sight assembly. The finish is thinning on the bottom of the floorplate and trigger guard. There are a few other scattered minor marks. The action shows operational wear. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included are the installed green canvas sling, cleaning accessories in the buttstock, green canvas zipper case, what appears to be its original shipping carton from Anniston Army Depot, AAD DD Form 1149 for the transfer of this rifle out of Army inventory and a bandoleer with six loaded en-bloc clips.

Our Assessment: This Harrington & Richardson M1 Garand, manufactured ca. 1955, is a fine example of the classic rifle. H&R was one of only two private contractors to produce the M1 Garand after WWII, the other being International Harvester. They were awarded a contract to produce rifles in 1952, during the Korean War, but were only able to produce 500 rifles in 1953 when the war ended. Their production would continue through 1956 with about 450,000 rifles total. This example was rebuilt at the Anniston Army Depot in 1965 and appears to have seen limited use since. It was sold out of Anniston as a Service Grade and comes with what appears to be the Anniston shipping carton. Every collection needs an M1 Garand and this one could be yours. Please see our photos and good luck!

This incredible World War II-era poster is a bold and thrilling example of wartime propaganda art, created to rally the American public behind the home front effort. Featuring a dramatic image of U.S. soldiers flying through the air in a Willys Jeep, rifles in hand and determination on their faces, the poster grabs your attention with its urgent message: "They’ve got more important places to go than you!... Save Rubber – CHECK YOUR TIRES NOW." This vibrant piece, illustrated by artist Walter Richards, brilliantly combines patriotic fervor with practical advice, reminding civilians that something as simple as tire maintenance directly supports the war effort.

Not only is this poster a powerful piece of graphic design, but it's also a time capsule of the collective spirit and sacrifice that defined the 1940s. The dynamic composition and use of perspective create a sense of motion and urgency, perfectly aligning with the message. This poster wasn’t just art—it was action. It called on Americans to take responsibility for their vehicles so that precious resources like rubber could be conserved for the military. Whether you're a collector, historian, or vintage design enthusiast, this poster is a thrilling artifact of American resolve and ingenuity during one of the most pivotal moments in history!

Make: Springfield Armory

Model: M1 Garand. Based on the new-production walnut CMP stock and Criterion barrel, we suspect that this is a CMP Expert Grade.

Serial Number: 3703918

Year of Manufacture: Receiver- March, 1945, Barrel- March, 2020

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Markings:

Receiver- “U.S. RIFLE / CAL. .30 M1 / SPRINGFIELD / ARMORY / 3703918”

Trigger Group- “6528290 - SA”

Hammer- “SA D5546008”

Safety- “SA”

Receiver Leg- “0 8 2 / D 28291 35"

Follower: "8"

Op Rod- “6535382 SA”

Barrel- “CBI 6535448 1-10 03/20 5S"

Bolt- “6528287-SA / US1”

Stock- CMP eagle cartouche.

Rear Sight- "DRC"

Barrel Length: 24”

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings. The rear sight aperture has minor play in the assembly.

Stock Configuration & Condition: The stocks are smooth walnut with a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (nothing in compartment). The LOP measures 13” from the front of the trigger to the back of the buttplate. The stocks have no notable wear or damage, only light handling marks. There are no chips or cracks. Overall the stocks are in Excellent condition.

Type of Finish: Parkerized

Finish Originality: Some parts appear to have Original finish, others have been Refurbished. The barrel is a Criterion replacement.

Bore Condition: The bore is bright with sharp rifling. There is no erosion in the bore. Our gauges show an ME of about 0 and a TE of about 0. In this writer's opinion the bore rates 10/10.

Overall Condition: The rifle retains 94% of its metal finish. The most notable finish wear is on the front sight assembly which has some nicks on the protective ears, and the trigger guard. Some parts show edge-thinning. There is infrequent minor oxidation, mostly on and around the gas cylinder. There is infrequent erosion and pitting under the finish, primarily on the receiver below the stock-line. The action shows operational wear. Overall, this rifle is in about Fine condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: The rifle comes in a black plastic CMP case with CMP manual, chamber flag, and one en-bloc clip.

Our Assessment: This M1 Garand appears to be an Expert Grade from the CMP, sporting a beautiful commercial CMP cartouched walnut stock and a Criterion barrel that still gauges 0/0. Assembled on a 1945 production Springfield Armory receiver with mostly Springfield parts, it ought to make for a great shooter once the rear sight is tightened up a bit. Every collection needs a Garand, and this one could be yours. Please see our photos and good luck!

Make: Springfield Armory (commercial)

Model: M1 Garand, assembled to M1D-style configuration.

Serial Number: 7003630

Year of Manufacture: Ca. 1980s

Caliber: .30-06 Springfield

Action Type: Semi Auto, 8 round en bloc clip fed

Barrel Length: 24”, 26 1/2" to the front of the installed flash-hider.

Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings. Red paint "cheater-lines" have been painted on the rear sight assembly. A reproduction M84 scope is mounted to the barrel, the mount has play to the barrel.

Stock Configuration & Condition: The stocks are smooth wod with a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal buttplate with hinged door for storage (oiler bottle with bore pull-through in compartment). The action is bedded to the stock. The LOP measures 13” from the front of the trigger to the back of the buttplate. A leather cheek-pad is installed on the stock. The stocks have light wear with scattered nicks, scuffs and scratches. There are no chips or cracks. Overall the stocks are in Very Good condition.

Type of Finish: Parkerized

Finish Originality: Some parts appear to have Original finish, others are Refurbished USGI parts.

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore. Our gauge shows a TE of about 4, we could not properly measure the ME with the installed flash-hider. In this writer's opinion the bore rates 9/10.

Overall Condition: The rifle retains 87% of its metal finish. The finish is thinning at most edges. The most notable finish wear is on the gas cylinder and florplate/trigger guard. There are some scattered light marks. The action shows light operational wear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: The rifle comes in a green canvas zipper case with a canvas scope case, 32 rounds of 1959 Frankford Arsenal Match and 48 rounds of 1978 Greek headstamp ammunition, all on en-bloc clips.

Our Assessment: This M1 Garand is made in a 1980s vintage commercial Springfield Armory receiver. It has been assembled into an M1D configuration with a mixture of commercial and USGI parts. It ought to make for a great shooter once the scope mount is tightened up a bit. Every collection needs a Garand, and this one could be yours. Please see our photos and good luck!

The dogfaced, ground pounding US Army infantryman of WW2 had at least one significant advantage over his German or Japanese adversary, his rifle. The semi-automatic M-1 Garand was a generation ahead of the bolt action K-98 or Arisaka, and gave US ground troops the opportunity to establish fire superiority, a vital part of American infantry tactics during the war. This US Army WW2 M-1 Garand "SA/EMcF" Inspected Walnut Rifle Stock is in Very Good Condition, with the inspector’s mark at the left side remaining somewhat faint, some scattered spot darkening around the exterior and the inside channel, 4 small hairline cracks in the interior rear portion of the upper hand guard, some light loosening to the lower hand guard metal ferrule, the handguard remaining significantly darker than the stock, and with some light overall age wear evident. Most interestingly, it bears the classic encircled “P” proof mark at the bottom of the semi-pistol grip, carries the original “SA / EMcF” (Springfield Armory, Colonel Earl McFarland) inspector’s stamp at the left side, along with the classic Ordnance Department “wheel and crossed cannons” cartouche, and features the original checkered steel butt plate with “trap door” for storage and matching metal sling swivel at the bottom rear of the butt stock. This is a scarce stock in wonderful shape, and with its combination of markings and features, dates to ca. June 1942-July 1943, and would be correct for Garands in the serial number range 700,000-1,800,000. It’s complete with the original dark walnut handguard, and is a fine example of a very rare, original US Army WW2 M-1 Garand "SA/EMcF" Inspected Walnut Rifle Stock. Lastly, this stock set comes directly from the personal collection of renowned US military firearms author and historian Bruce Canfield, and a signed letter of authenticity stating as such will accompany this piece.

Get ready for a seriously cool blast from the Cold War era! This US Navy Vietnam War full bandolier of 7.62mm NATO cartridges is an absolute gem for collectors and history buffs alike. Packed with eight En Bloc clips, each one loaded with 7.62x51mm NATO rounds, this setup was designed to keep the legendary M1 Garand battle-ready even as the military transitioned calibers during the Vietnam era. Housed in a Vietnam War-era OD green cloth bandolier, this is a complete, intact example that looks like it came straight out of a Navy armory. Whether you're showcasing Cold War military evolution or curating a Vietnam War display, this piece is ready for the spotlight.

What makes this even more fascinating is the transitional history it represents. As the U.S. military moved away from the .30-06 cartridge, some Navy units continued using modified Garands chambered in 7.62mm NATO, and this bandolier is a direct result of that unique adaptation. You’re not just getting surplus ammo—you’re holding a piece of niche military logistics history that highlights ingenuity and practicality in real combat settings. This is the kind of find that adds depth and story to any collection.

Get ready for a truly exciting bulk offering straight from the golden age of U.S. military surplus—this massive lot of 185 assorted M1 Garand En Bloc clips is a must-have for collectors, shooters, and vintage gear enthusiasts! Pulled from the renowned Canfield Collection, these clips span the 1950s into the Vietnam War era, representing decades of American military history. Whether you’re looking to outfit your collection with original period-correct gear or stock up for the range, this generous assortment delivers both quantity and authenticity.

Each clip is a genuine U.S. military issue and represents the rugged reliability the M1 Garand is known for. With 185 clips in total, you'll have plenty to load up for reenactments, competition shooting, or simply to keep your rifles well-fed. These clips are more than functional tools—they're pieces of battlefield heritage. Don’t miss this opportunity to grab a serious quantity of original U.S. military hardware that’s becoming increasingly harder to find in bulk!

This lot includes two original U.S. military-issue M14 magazines, both marked "BRW / S-I"—denoting manufacture by Borg-Warner under contract at their Simpson, Iowa facility. These magazines were produced in the late 1950s and early 1960s for use with the M14 rifle, the standard-issue battle rifle for U.S. forces during the early stages of the Vietnam War. Constructed of parkerized steel with spot-welded seams and steel followers, these 20-round magazines were built to meet strict military specifications. The "BRW / S-I" marking is among the most desirable for collectors, as it represents one of the original and relatively scarce U.S. government contract runs before later mass production by other contractors. Both magazines remain in surplus-used condition with fully functional springs and intact feed lips. They show expected wear from field use but no significant damage. A great addition to any Cold War or Vietnam-era U.S. military collection, especially for enthusiasts of the M14 rifle platform

You're looking at an incredible piece of military firearms history—a US Army WWII Prototype T-44 and Early M14 Walnut Rifle Stock and Handguard. This is far more than just a stock; it’s a direct link to the transitional period between the legendary M1 Garand and its modernized successor, the M14. Crafted from walnut and showing the rugged, utilitarian beauty you'd expect from a military trial piece, this stock bridges the gap between World War II innovation and Cold War-era production refinement. Whether you're a serious military collector or a restoration enthusiast, this is the kind of rare component that doesn't come around often.

What makes this even more exciting is its dual significance—tied to both the experimental T-44 platform and early production M14s. The T-44 program was the proving ground for features that would define the M14: shorter overall length, selective fire capability, and a 20-round detachable magazine. This stock retains characteristics seen only in early test configurations, making it a standout piece for display or as the final puzzle piece in a historically accurate build. It’s not just a stock—it’s a piece of the evolution of U.S. military firepower.

Unlock a piece of World War II history with this authentic US Army WWII MG Cleaning Rod Set, complete with the essential tools for both the legendary M1 Garand and the M1 Carbine! This set is the real deal—designed for GI field use, it includes sections of the military-issue cleaning rod, along with brushes and components to keep those iconic rifles in battle-ready shape. Whether you're restoring your WWII display, building a period-correct collection, or simply want the right gear for your vintage firearms, this set delivers rugged authenticity and utility all in one.

But that’s not all—this bundle also includes six original M1 Carbine magazine covers, each made from durable canvas with classic snap closures and belt loop attachments. These mag pouches were standard-issue gear for U.S. soldiers storming the beaches, dropping into Europe, or defending the Pacific front. Their inclusion adds extra collectible value and functionality, making this a fantastic set for reenactors, collectors, and WWII buffs alike. Gear up with the tools of the Greatest Generation!

Unlock a true piece of WWII sniper history with this US Army M-1C Garand Sniper Rifle Scope Mounting Bracket, complete with one original screw and one pin! This is the exact style of mount used to outfit M1 Garand rifles for sniper duty under the M-1C designation, which saw service across Europe and the Pacific. These mounts were part of a specialized setup involving a Griffin & Howe side mount and the M82 scope, allowing the legendary Garand to deliver precision fire from concealment. Whether you're restoring an authentic M-1C sniper or completing a historically accurate clone, this bracket is an essential and incredibly hard-to-find component.

What makes this piece especially appealing is the inclusion of one screw and one pin—small but critical parts that are often lost to time. The finish shows appropriate patina from age, giving it that genuine battlefield feel collectors love. Whether you’re a reenactor, historian, or military surplus enthusiast, this mounting bracket will elevate your build and bring you one step closer to a fully restored M-1C sniper rifle. Don’t miss the chance to own a real piece of WWII sniper gear!

This is an absolutely iconic piece of American military history — a WWII US Army M-1C Garand Sniper Rifle Scope Mounting Bracket, complete with its original stamped serial number! Specifically designed for use with the legendary M-1C sniper variant, this bracket was part of the precision setup that helped U.S. marksmen extend their reach across the battlefields of Europe and the Pacific. Unlike generic repros, this is the real deal — forged for war, fielded with purpose, and now ready to be preserved by collectors who appreciate the legacy of American sharpshooting excellence.

What makes this bracket particularly special is its numbered format, indicating it was part of a matched set during its service life — a rare and desirable feature for serious WWII collectors and reenactors looking to bring authenticity to their builds. Whether you're restoring a period-correct M-1C sniper rifle or simply want a tangible connection to the brave soldiers who carried these tools into combat, this mounting bracket delivers a compelling mix of form, function, and history. Don't miss your chance to own a piece of the sniper’s edge from the Greatest Generation!

This is an outstanding example of a U.S. Army WWII M1 Garand Rifle fitted with a Fay & Scott M7 Grenade Launcher, representing one of the most iconic and battle-proven combinations of the Second World War. The M1 Garand was the standard-issue service rifle for U.S. forces, renowned for its reliability, accuracy, and semi-automatic firepower. When equipped with the M7 grenade launcher, it transformed into a versatile platform capable of delivering explosive ordnance with precision—significantly expanding a soldier’s tactical capabilities on the battlefield.

The included M7 launcher was produced by Fay & Scott, one of the original wartime contractors, and is a correct period attachment for a WWII-issued Garand. These launchers were used to great effect throughout the European and Pacific Theaters, allowing U.S. infantry to neutralize fortified positions, light vehicles, and enemy personnel with devastating impact. As a complete and historically accurate set, this combination is highly desirable for collectors of U.S. military arms and WWII memorabilia. It captures the ingenuity and combat effectiveness of American forces in a tangible, display-worthy piece of history.

Offered here is a genuine U.S. Army WWII-era M1 Garand rifle sling from the respected Canfield Collection. This is the classic OD (olive drab) green canvas sling fitted with the sought-after “flat buckle” hardware, a correct wartime pattern used extensively by American troops during the Second World War. These flat buckle slings were a standard issue for M1 Garand rifles starting in the early 1940s and are characterized by their stamped, parkerized steel hardware featuring flat, rectangular adjustment clamps and simple keepers. The example here remains in solid, serviceable condition with minor age-related wear and surface oxidation on the hardware, consistent with field use and storage. The canvas retains its olive drab color with just the right patina, a testament to its authenticity and period use. Original M1 Garand slings are increasingly hard to find in complete and untouched condition, and this one is a fine representative of its type. Whether you're restoring a wartime M1 Garand or enhancing a U.S. military display, this original WWII sling will add historical accuracy and collector value.

Now this is a piece of Americana with attitude! The “Have You REALLY Tried to Save Gas by Getting Into a Car Club?” poster is a bold, wartime-era throwback that hits with both nostalgia and practicality. Featuring a stern, no-nonsense soldier in full gear, this vintage-style propaganda print cleverly blends patriotic duty with mid-century resourcefulness—encouraging everyday citizens to conserve fuel by riding together. It’s the kind of art that doesn’t just decorate a wall, it commands attention.

Perfect for any garage, office, or man cave, this framed original (or faithful reproduction) packs a punch with its vivid colors, bold type, and serious expression. It’s a reminder from a different time, when unity and sacrifice were front and center—even in how you got to work. Whether you're a collector of WWII-era memorabilia, a classic car enthusiast, or just love quirky retro pieces, this poster is pure gold. And hey… have you really tried it?

This Original WWII Army Air Force “Keep ’Em Flying” War Poster is an absolutely iconic piece of American wartime history! Bold, patriotic, and unmistakably evocative of the era, this poster features a dramatic B-17 Flying Fortress soaring overhead with the rallying cry "Keep 'Em Flying" emblazoned across the sky. These posters were not just decorative—they were morale-boosting tools used to energize the home front and support the United States Army Air Forces during the height of World War II. With its vivid imagery and powerful message, this original example captures the spirit and urgency of the 1940s like few other artifacts can.

Printed during the war years, this authentic poster would have been displayed in factories, recruitment centers, or public buildings to inspire enlistment, encourage production, and keep the American spirit soaring as high as the B-17s themselves. Whether you’re a collector of WWII memorabilia, a fan of aviation history, or simply love Americana at its most compelling, this piece is a must-have. The rich colors, crisp design, and historical significance make it an unforgettable display item and a proud tribute to the Greatest Generation.

This incredible WWII U.S. Army Enlisted Man’s Wooden Footlocker from 1943 is an outstanding artifact from the Canfield Collection—an ideal centerpiece for any collector of American military history. Measuring approximately 32" x 16" x 13", this footlocker is constructed of solid wood and retains its classic WWII-era olive drab green paint, offering a rugged and unmistakably authentic look. It features sturdy metal hardware and corner brackets for reinforcement, with a hinged lid and internal tray (not present) once used to store smaller personal effects. Whether displayed in a home, office, or museum setting, this piece carries the unmistakable weight of service and sacrifice from America’s Greatest Generation.

Not only is this footlocker a functional storage piece, but it's also a conversation starter packed with historical resonance. Issued to enlisted soldiers during World War II, these lockers were a GI’s lifeline for personal belongings, uniforms, letters from home, and essentials during deployment. The Canfield Collection designation further elevates its value, as pieces curated under this name are known for their authenticity and historical significance. For collectors, decorators, or educators alike, this 1943 wooden footlocker offers a tangible, evocative link to the brave men who served—and a striking piece of wartime Americana.

The Japanese seizure of Burma in 1941 cut the Burma Road, the vital supply lifeline between Burma and China. The US Army Air Forces mounted a massive aerial resupply effort based in Northern India to keep Chiang Kai-shek's Nationalist forces in the fight. AAF cargo pilots flew tons of supplies "over the Hump" into China, braving treacherous weather, towering Himalayan peaks, and marauding Japanese fighters. Many AAF personnel in the CBI acquired souvenirs from local craftsmen to send or bring back to their loved ones on the homefront. Among the more exciting gifts a father would have sent to his boy back home was a pair of CBI incised patch badged leather flight boots. This pair of US Army AAF WW2 CBI Souvenir Father Bringback Boy’s Leather Flight Boots are in Fair Condition, with heavy rough tearing to the linings, moderate scuffing and flaking to the toes, moderate indenting to the insteps, moderate drying, crazing, and surface cracking to the lowers, moderate wrinkling and darkening to the uppers, the patches at the upper front shafts appearing to have come unstitched long ago, and been reattached with adhesive long ago as well, some loosening to the adhesion around the edges of the right boot patch, and with moderate to heavy overall wear evident. Most interestingly, they measure 7” tall and 7 1/2” in length from heel to toe, sport finished brown leather lowers and “roughout” brown leather uppers, and bear the classic China, Burma, India sun, star, and striped shield theater made incised leather patches at the upper front shafts. These boots are surprisingly well constructed, with leather strap and metal buckles across the insteps, stitched leather soles, pinned leather heels, and metal heel taps, and are an honest example of very rare, original US Army AAF WW2 CBI Souvenir Father Bringback Boy’s Leather Flight Boots.

Size 40, Good Condition, moderate scattered drying, wrinkling, and surface cracking throughout. Spectacular theater made painted leather 54th Troop Carrier Squadron patch at the left chest, under a matching theater made sewn leather name tab reading "James B. Senter", along with Kanji characters, likely his name transliterated. Original AAF "TYPE A-2" woven nomenclature/maker's label of Poughkeepsie Coat Co. at the inside neck. Classic horsehide leather shell, spun brown cotton lining, snap down collar, box and X stitched leather shoulder straps, hook and eye neck closure, original and fully functional front zipper, Acme Thunderer ditch whistle, and original knit wool cuffs and waistband.

Size 42, Very Good Condition, some grayish soiling at the lower right front pocket, and some overall age wear. Spectacular chenille embroidered and Disney designed 5th Tow Target Squadron patch at the left chest, under the sewn leather name strip of "J.M. AUSTIN". Original AAF "TYPE A-2" woven nomenclature/maker's label of I. Spiewak & Sons at the inside neck, one of the scarcer makers of the A-2 to encounter today, whose jackets were notably crafted of goatskin rather than the traditional horsehide. Classic spun brown cotton lining, snap down collar, box and X stitched leather shoulder straps, hook and eye neck closure, original and fully functional front zipper, and original knit wool cuffs and waistband.

Make: Colt

Model: Commando

Serial Number: 3815

Year of Manufacture: 1943 (C&R)

Caliber: .38 Special

Action Type: Double Action Revolver with Swing-Out Cylinder

Barrel Length: 4”

Sights / Optics: The front sight is a fixed blade. The rear sight is a square notch integral to the top strap.

Grip Configuration & Condition: The grips are checkered brown plastic with Colt medallions. While they are in excellent condition with minimal handling wear, they do not appear to be original to the firearm.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This revolver retains about 90% of its metal finish. The balance of the finish shows minor handling wear and light operational wear on the cylinder. The parkerized finish remains strong, with only small areas of thinning and slight edge wear. The screw heads are sharp. The markings are clear and well-defined. Overall, this revolver rates in about excellent condition.

Mechanics: The action functions correctly. The cylinder locks up with little play, and the double and single-action trigger pulls are smooth. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Colt Commando was produced during World War II as a wartime alternative to the commercial Colt Official Police. These revolvers were intended for military and law enforcement use, featuring a parkerized finish and plastic grips for durability. Many were issued to guards, military police, and defense workers during the war, making them a significant part of American wartime history.

With its 4-inch barrel and chambering in .38 Special, the Commando was well-suited for security and law enforcement roles, offering reliability and ease of use. The parkerized finish helped protect against corrosion, making it ideal for military and government service in various conditions.

This example remains in outstanding condition, retaining about 90% of its original finish, though the grips, while excellent, do not appear to be original to the firearm. Its strong bore and smooth action make it an excellent choice for collectors of military and police revolvers or anyone interested in WWII-era firearms.

Make: Colt

Model: Commando

Serial Number: 34347

Year of Manufacture: 1942-1945 (WWII-Era)

Caliber: .38 Special

Action Type: Double Action / Single Action Revolver with Swing-Out Cylinder

Markings: The left side of the barrel is marked “COLT COMMANDO .38 SPECIAL.” The top of the barrel is marked with Colt’s two-line patent and address. The frame is marked with “G.H.D.” (inspector’s initials for Guy H. Drewry) above a U.S. Ordnance flaming bomb acceptance mark. The serial number “34347” is stamped on the frame and crane. 

Barrel Length: 4”

Sights / Optics: The front sight is a blade integral to the barrel. The rear sight is a square-notch groove in the top strap.

Grip Configuration & Condition: The grips are wartime-era Colt checkered polymer. The grips show minor handling wear but remain structurally sound, rating in Very Good condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright, and the rifling is sharp. There is no visible erosion or fouling. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This revolver retains about 85% of its original Parkerized finish, with expected wartime handling wear, some thinning on the high edges, and minor scuffs throughout. The frame markings, including the "G.H.D." inspector’s stamp and Ordnance flaming bomb, remain clear. The screw heads are sharp, and the cylinder locks up tightly with minimal play. Overall, this revolver rates in Very Good condition given its age and military history.

Mechanics: The action functions correctly. The double-action trigger pull is smooth, and the single-action break is crisp. The cylinder rotates properly and locks securely. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This revolver comes as part of a complete WWII Shore Patrol rig, which includes:

Military web belt

Leather holster

Ammo pouch with 50-round box of .38 Special ammunition (Ships Seperatly)

Billy club and billy club holster

SP (Shore Patrol) armband

Red Medical kit & first aid pouch

Our Assessment:The Colt Commando was a wartime adaptation of the Colt Official Police revolver, produced specifically for military and law enforcement use during World War II. With its Parkerized finish, lack of a polished hammer and trigger, and simplified grips, the Commando was built for durability and function over aesthetics. These revolvers were issued to military police, defense plant guards, and Shore Patrol units, making them a significant piece of U.S. wartime history.

This particular revolver, serial number 34347, is marked with the "G.H.D." inspector’s initials and the U.S. Ordnance flaming bomb acceptance mark, confirming its military contract origins. It retains about 85% of its original Parkerized finish, with only light handling wear, and remains mechanically sound.

What makes this package truly special is the inclusion of a full WWII Shore Patrol rig. The belt, leather holster, ammo pouch, billy club with holster, SP armband, medical kit, and first aid pouch provide an authentic representation of a U.S. Navy Shore Patrolman’s gear during WWII.

For collectors of WWII firearms and militaria, this is an exceptional find. Not only is the Colt Commando an important piece of wartime history, but the complete Shore Patrol setup adds immense historical value. Whether displayed as a museum-quality set or added to a personal collection, this is a rare opportunity to own a well-preserved example of America’s WWII homefront security and law enforcement history.

(Ammo Ships Separately)

Make: Colt

Model: Commando

Serial Number: 17127

Year of Manufacture: 1943

Caliber: .38 Special

Action Type: 6-Shot, DA/SA Double and Single Action, Swing-Out Fluted Cylinder Revolver.

Barrel Length: 2"

Sights/Optics: The front sight is a rounded blade fixed to the front of the barrel. The rear sight is a square notch integral to the topstrap.

Stock Configuration and Condition: The grips are two-piece checkered "Coltwood" plastic with molded Colt medallions and smooth borders. The grips have only a few scattered minor marks. There are no chips or cracks. The checkering is well-defined. Overall, the grips are in Fine condition.

Type of Finish: Parkerized

Finish Originality: Refinished, possibly Arsenal Refurbished

Bore Condition: The bore is mostly bright and the rifling is sharp. There is no erosion in the bore, just a little stubborn fouling. In this writer's opinion, the bore rates 9+ out of 10.

Overall Condition: This handgun retains about 98% of its current metal finish. The finish is thinning at some edges. There is infrequent minor erosion under the finish, most notable on the cylinder latch. There are a few small tool marks at the sideplate screws. The action shows minor operational wear including a thin, light turn-line on the cylinder. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this revolver is in Fine condition as refinished.

Mechanics: The action functions correctly. We did not fire this revolver. As with all used firearms, thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork, and Accessories: This Commando Revolver comes with a Colt Archives letter. The letter confirms that this revolver shipped May 14, 1943 to the U.S. Army Consolidating Station in New York, NY for the Transportation Officer at the San Francisco Port of Embarkation Oakland Branch in Oakland, California as one of 500 guns of the same type in the shipment.

Our Assessment: As the United States entered World War II, demand for all things military strained even the massive industrial capacity of America. Frontline arms were prioritized for frontline units, but there was also a need to arm law enforcement, guards at factories, and other sites with strategic importance, such the Maritime Commission and various other non-combat roles which still required arms. To help fill this demand, Colt produced a variation of their Official Police revolver with specifications set by the US Government. The result was the Commando revolver, of which 50,617 were produced from 1942-1945.

This example was shipped to the U.S. Army Consolidating Station in New York, bound for the Oakland Branch of the San Francisco Port of Embarkation in 1943. Unlike the majority, this Commando features a factory 2" barrel, sometimes called a "Junior Commando". These short barreled variants were produced in fewer numbers, and were found useful for roles where a smaller revolver was desirable such as air crews, OSS operatives or plainclothes military police. This revolver will certainly make a fine addition to any Colt or WWII small arms collection. Good luck and happy bidding!

Make: Colt

Model: Commando, Massachusetts National Guard

Serial Number: 34476

Year of Manufacture: 1943

Caliber: .38 Special

Action Type: Double / Single Action, Swing-Out Cylinder Revolver

Barrel Length: 4”

Sights / Optics: The front sight is a fixed blade, and the rear sight is a notch integral to the top strap.

Stock Configuration & Condition: The grips are two-piece checkered “Coltwood” plastic panels with rampant colts molded into their tops. There is no notable wear or damage, only light handling marks. Overall, the grips are in Excellent condition.

Type of Finish: Parkerized (Parco-Lubrite)

Finish Originality: Original

Bore Condition: The bore is bright with sharp rifling. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains about 98% of its original Parkerized finish. The metal surfaces show minimal handling marks, and the finish remains consistent. The screw heads are sharp, and the markings remain crisp and well-defined.

Mechanics: The action functions correctly. The cylinder locks up tightly with minimal play. The double-action trigger pull is smooth, and the single-action break is crisp. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: As the United States entered World War II, demand for all things military strained even the massive industrial capacity of America. Front-line arms were prioritized for front-line units, but there was also a need to arm law enforcement, guards at factories and other sites with strategic importance, the Maritime Commission and various other non-combat roles which still required arms. To help fill this demand, Colt produced a variation of their Official Police revolver with specifications determined by the US Government. The result was the Commando revolver, roughly equivalent to Smith & Wesson’s Victory model, with 50,617 produced from 1942-1945. This example is quite interesting, not only because it has been so well preserved but also because it is one of 300 procured by the Massachusetts National Guard. According to Charles Pate’s book “U.S. Handguns of World War II The Secondary Pistols and Revolvers”, the 300 revolvers were sent in two shipments, February and March, 1944. According to Pate, “These revolvers were apparently used very little, if at all, before being dipped in Cosmoline, wrapped in heavy paper and placed back into their craft boxes for long-term storage”. This revolver fits that description to a T, with some of its cosmoline and wrapped in heavy paper. It should make a great addition to a Colt or WWII small arms collection, especially if you’re from the Bay State. Please see our pictures and good luck!

Make: Colt

Model: M1917

Serial Number: 195554

Year of Manufacture: 1919

Caliber: .45 ACP (Moon Clips Required)

Action Type: Double Action / Single Action Revolver with Swing-Out Cylinder

Markings: The left side of the barrel is marked “COLT D.A. 45.” The top of the barrel is marked with Colt’s two-line patent and address. The frame is marked with the rampant Colt logo and "U.S. PROPERTY" under the barrel. The butt is marked with the serial number and military ordnance markings. The cylinder is marked with U.S. military acceptance marks. Th left side of the barrel is marked “4812”. The right side of the frame behind the cylinder is marked “S” along with the “Crossed Cannons Insignia”. The right side of the frame beneath the cylinder is marked “T”. Inside the crane  cut is marked “3” “H” and “195554” over “t” over “4812”

Barrel Length: 5 1/2”

Sights / Optics: The front sight is a blade integral to the barrel. The rear sight is a U-notch groove in the top strap.

Grip Configuration & Condition: The grips are checkered polymer. They show light handling wear, with minor dings and handling marks, light chips near the butt, but no cracks or significant damage. They rate in about Very Good condition.

Magazine Quantity & Condition: This revolver is fed using full-moon or half-moon clips (not included).

Type of Finish: Military Blued

Finish Originality: Original

Bore Condition: The bore is bright, and the rifling is sharp. There is no visible erosion or fouling. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains about 75% of its original finish. There is expected operational wear, thinning on high edges, and scattered handling marks. There is a nice brown patina forming on the trigger guard and backstrap Lots of finish missing from the muzzle. The markings are clear, and the screw heads are sharp. The cylinder locks up well with minimal play. Overall, this revolver rates in Very Good condition.

Mechanics: The action functions correctly. The double-action trigger pull is smooth, and the single-action break is crisp. The cylinder locks up properly, and the ejector functions as intended. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This revolver comes with a full U.S. military web gear set, including a holster, belt, suspenders, lanyard, first aid kit, pouches, and the highly coveted USMC triple ammo pouch.

Our Assessment: The Colt M1917 was designed as a stopgap measure during World War I when the U.S. military faced a shortage of M1911 pistols. Chambered in .45 ACP and designed to use moon clips, the M1917 revolver was a highly reliable sidearm that saw extensive use by American forces throughout both World Wars and beyond.

This particular example, manufactured around 1919, retains 75% of its original finish and is in Very Good condition. The bore is exceptionally sharp, and the revolver remains mechanically sound. What sets this piece apart is its incredible collection of period-correct accessories, including the holster, belt, suspenders, lanyard, first aid kit, and the rare USMC triple ammo pouch.

For collectors of U.S. military firearms, this is a fantastic opportunity to own a historically significant revolver with a complete field gear set. The M1917 has a rich history of service, and this example is an excellent addition to any collection, offering both historical value and investment potential.

Make: Smith & Wesson

Model: 1917

Serial#: 50746

Year of Manufacture: 1918-1946 (C&R)

Caliber: .45 ACP

Action Type: Double-Action Revolver with Swing-Out Cylinder (uses half-moon clips)

Markings: The barrel is marked “S.&W. D.A. 45” on the left side, and the underside is marked "UNITED STATES PROPERTY". The butt of the revolver is marked "U.S. ARMY MODEL 1917" and serial number “50746”. The frame, cylinder, barrel flat, and crane are all marked with matching serial numbers or partial serial numbers. The left side of the frame displays the flaming bomb inspector’s proof.

Barrel Length: 5 ½”

Sights / Optics: The front sight is a fixed half-round blade integral to the barrel. The rear sight is a square notch integral to the top strap.

Stock Configuration & Condition / Grip: The grips are original two-piece smooth walnut panels showing moderate to heavy handling wear, with surface smoothing, scattered compressions, and worn edges from extensive handling. There are no major cracks or chips. Overall, the grips rate in Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright with sharp rifling. There is mild erosion scattered throughout. In this writer’s opinion, the bore rates 7/10.

Overall Condition: This revolver retains about 80% of its original blued finish. Finish loss is evident on most leading edges, muzzle, cylinder edges, and high points throughout. The finish shows typical thinning consistent with holster wear and military service. Scattered handling marks and minor scratches are present. Screwheads remain serviceable with moderate tool marks. All markings remain clear and legible. Overall, this revolver rates in Good-plus condition as a C&R.

Mechanics: The action functions correctly with proper cylinder lockup and timing. We did not fire this revolver. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box Paperwork and Accessories: This revolver comes with a period-correct military holster, belt, cartridge pouches, several half-moon clips loaded with ammunition, and the original lanyard cord, which is still intact. All accessories are in Good–Very Good condition, showing expected age-related wear and patina.

Our Assessment: The Smith & Wesson Model 1917 revolver was developed during World War I to address shortages of the M1911 pistol. Chambered in the powerful .45 ACP cartridge and employing half-moon clips for efficient loading, it quickly became favored for its reliability, durability, and ease of maintenance. Produced between 1917 and 1946, these revolvers served through both World Wars and saw extensive use with American troops.

This particular revolver, serial number 50746, is a fine example of military service history, retaining about 80% of its original finish with honest handling wear. Included are original military-issued accessories, significantly enhancing its desirability to collectors. Whether you're a dedicated Smith & Wesson collector or a military history enthusiast, this authentic revolver with original accessories represents an excellent opportunity to own a genuine piece of American military heritage.

Make: Smith & Wesson

Model: Victory Model

Serial Number: V663373

Year of Manufacture: Circa 1944

Caliber: .38 Special

Action Type: Double Action Revolver with Swing-Out Cylinder

Markings: The left side of the barrel is marked "SMITH & WESSON." The right side of the barrel is marked "38 S&W SPECIAL CTG." The butt is marked with the serial number and an ordnance bomb mark. The barrel flat and the rear face of the cylinder are both marked with a “P” proof mark, indicating military acceptance. The frame is marked "MADE IN U.S.A." and the sideplate bears the Smith & Wesson monogram.

Barrel Length: 2”

Sights / Optics: The front sight is a fixed half-moon blade. The rear sight is a square notch integral to the top strap.

Grip Configuration & Condition: The grips are smooth walnut panels, numbered to the gun. They show light handling wear and some minor marks but remain in Very Good condition.

Type of Finish: Parkerized

Finish Originality: Refinished, possible Arsenal Refurbish

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This revolver retains about 95% of its current parkerized finish. There are some minor handling marks and faint wear near the muzzle and leading edges. There is infrequent minor erosion under the finish. The screw heads are sharp, and the markings remain well-defined. Overall, this revolver is in Fine condition.

Mechanics: The action functions correctly. The cylinder locks up securely with minimal play, and the trigger pull is smooth. The lanyard loop is still installed. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Smith & Wesson Victory Model served as a critical sidearm for U.S. and Allied forces during World War II. Produced in large numbers, these revolvers were issued to military police, naval personnel, and aircrews. The “P” proof marks and ordnance bomb marking on this example confirm its military acceptance and service history.

What sets this Victory Model apart is its scarce 2-inch barrel. Most Victory Models were produced with 4-inch barrels, making this shorter variant highly desirable for collectors and enthusiasts alike. Additionally, the revolver retains its original numbered grips and military markings, further cementing its authenticity.

For collectors of WWII-era U.S. military handguns, this Victory Model is a fantastic piece of history. The arsenal-quality parkerized refinish ensures durability while preserving the revolver’s historic character. With its strong bore, excellent mechanics, and military provenance, this revolver would be a prized addition to any collection.

Make: Smith & Wesson

Model: Victory Model

Serial Number: V35230

Year of Manufacture: Circa 1942-1945 (C&R)

Caliber: .38 Special

Action Type: Double Action Revolver with Swing-Out Cylinder

Markings: The top strap is marked "U.S. NAVY." The left side of the barrel is marked "SMITH & WESSON." The right side of the barrel is marked "38 S&W SPECIAL CTG." The right side of the frame is marked "MADE IN U.S.A." The sideplate bears the Smith & Wesson monogram. The butt is marked "V35230," matching the serial number.

Barrel Length: 4”

Sights / Optics: The front sight is a serrated blade fixed to the barrel. The rear sight is a square notch integral to the top strap.

Grip Configuration & Condition: The grips are two-piece smooth walnut. The inside of the right panel is marked with a non-matching number. The left panel has a notable ding on the bottom. The grips otherwise show even light wear. There are no cracks. Overall, the grips are in Very Good condition as not original to the gun.

Type of Finish: "Black Magic" Oxide

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no erosion, with only light signs of use. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This revolver retains about 95% of its metal finish. There is thinning at the leading edges, particularly around the muzzle, trigger guard, and cylinder. The backstrap and frontstrap show some handling wear. The screw heads are sharp, and the markings are crisp. Overall, this revolver is in Very Good condition.

Mechanics: The action functions correctly. The cylinder locks up tightly with minimal play, and the trigger pull is smooth. The lanyard loop remains intact. We did not fire this revolver. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This revolver includes a vintage holster marked with the date "1956".

Our Assessment: The Smith & Wesson Victory Model was a workhorse revolver used during World War II and beyond. Issued to the U.S. Navy, Marine Corps, and other military branches, these revolvers saw extensive use in both combat and support roles. Distinguished by their "V" prefix serial numbers, these revolvers were produced in large quantities but remain highly collectible, especially those with military acceptance markings.

This particular example is marked "U.S. NAVY" on the top strap, confirming its military service. It retains 95% of its original "Black Magic" finish, with wear consistent with a well-preserved military sidearm. The included vintage holster adds to its historical appeal.

For collectors of WWII-era U.S. military firearms, this Victory Model is a fantastic find. Its strong bore, functional action, and historical significance make it a great addition to any military or Smith & Wesson collection. Whether displayed or shot, this revolver represents a pivotal period in American firearms history.

Make: Colt

Model: Type IV 1903 Pocket Hammerless

Serial Number: 569158

Year of Manufacture: Late 1944- Early 1945 (shipped January 26, 1945)

Caliber: .32 ACP

Action Type: Single Action Semi-Auto Pistol with Removable Magazine

Barrel Length: 3 3/4"

Sights/Optics: The front sight is a short, serrated, ramped blade fixed to the top of the slide. The rear sight is a square notch dovetailed into the rear of the slide.

Stock Configuration and Condition: The grips are checkered walnut with silver-colored rampant colt medallions. The grips show minor handling wear with a little verdigris at the screw escutcheons. The checkering is well defined. There are no chips or cracks. Overall the grips are in Fine condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion and minor pitting in the bore. In this writer's opinion, the bore rates 6+ out of 10.

Overall Condition: This handgun retains about 87% of its metal finish. The finish is thinning at most edges. There are a few small nicks and scratches with some scattered minor scuffs. There is infrequent minor oxidation, most notable at the right-rear of the frame below the slide. The action shows operational wear. The screw head is sharp. The markings are clear. Overall, this pistol rates in Very Good condition.

Mechanics: The action functions correctly. We did not fire this handgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: This pistol comes with a total of three 8-round magazines and a Colt Archives letter. One magazine is two-tone, the others are full blue, each marked "CAL. 32 / COLT" on the floorplate. The letter indicates that this pistol shipped January 26, 1945 to the Transportation Officer, Springfield Armory as one of 1,000 guns of the same type in the shipment.

Our Assessment: In addition to its commercial popularity, the Colt 1903 served as United States General Officer pistols from the 1940s until their replacement by the M15 General Officers pistol in the 1970s. The Office of Strategic Services issued the Model 1903 to its officers during World War II, it was used by the British SOE, and they were issued to various other intelligence and investigative personnel. This U.S. Property marked example is in Very Good condition with 87% of its original parkerized finish remaining, a decent bore, and strong mechanics. This would still make a fun shooter, but with this pistol's history, it will also be of great interest to Colt and WWII collectors. Please see our photos and good luck!

Make: Colt

Model: Model 1911 U.S. Army

Serial Number: 19306

Year of Manufacture: 1913

Caliber: .45 ACP

Action Type: Semi-Automatic, Single Action, Fed by Detachable Magazine

Markings: The left side of the slide is marked “PATENTED APR. 20. 1897 / SEPT. 9. 1902. DEC. 19. 1905. FEB. 14. 1911.” and “COLT’S PT. F.A. MFG. CO. / HARTFORD. CT. U.S.A.” The right side of the slide is marked “MODEL OF 1911 U.S. ARMY.” The left side of the frame is marked with the serial number “No 19306.” The right side of the frame is marked “UNITED STATES PROPERTY.”

Barrel Length: 5”

Sights / Optics: The front sight is a rounded blade fixed to the slide. The rear sight is a U-notch dovetailed into the slide.

Stock Configuration & Condition: The grips are checkered walnut panels. The grips show general wear, handling marks, and softened checkering. There are no cracks or major losses. The stocks rate in about Good overall condition.

Magazine Quantity & Condition: One 7-round magazine in Fair condition with finish wear.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright, the rifling is sharp. There is no visible erosion in the bore but there is stubborn fouling throughout. In this writer’s opinion, the bore rates 7.5/10.

Overall Condition: This pistol retains about 40% of its metal finish. The balance of the finish shows moderate finish loss, thinning, and scattered areas of oxidation and patina. The areas of exposed metal have developed a gray patina. There is freckled surface corrosion visible on the slide and frame. The screw heads are serviceable with mild tooling. The markings are legible. Overall, this pistol rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This pistol comes with one magazine and a plastic framed Colt Archives letter.

Our Assessment: This is an early-production Colt Model 1911, manufactured in 1913 and issued to the U.S. Army. The Model 1911, designed by John Browning, became the standard-issue sidearm of the U.S. military and remains one of the most influential pistol designs in history.

This example, with its early military acceptance markings and classic blued finish, is a significant piece for collectors. The visible wear and patina speak to its long service life, yet the markings remain clear, and the mechanical functionality is intact. The bore remains exceptionally strong, making it a desirable example for historical appreciation or even range use with proper care.

For collectors of U.S. military sidearms, particularly early Colt 1911s, this is an outstanding opportunity to acquire a true piece of American history. These early-production examples continue to appreciate in value and serve as cornerstone pieces in any serious collection.

Make: Colt

Model: 1911

Serial Number: 148794

Year of Manufacture: 1917, shipped May 21 to Military Training Camp, Madison Barracks, Sacket Harbor, NY in a shipment of 800 pistols.

Caliber: .45 ACP

Action Type: Single Action Semi-Auto with Removable Magazine

Markings: The left side of the slide is marked “PATENTED APR.20.1897. SEPT.9,1902 / DEC.19,1905. FEB.14,1911. AUG.19,1913” and “COLT’S PT. F.A. MFG. CO. / HARTFORD, CT. U.S.A.”, with a Rampant Colt logo at the rear of the slide. The right side of the slide is marked “MODEL OF 1911. U. S. ARMY”. The right side of the frame is marked “No 148794”. The left side of the frame is marked “UNITED STATES PROPERTY” and behind the trigger with a circled “GHS”. The top of the barrel at the chamber opening is marked with ""P"" and ""H"". The top rear face of the slide is marked “H” (vertical, no serif) above the firing pin plate, there is an ""8"" and a small ""z"" marked under the plate. The flat on the top of the frame around the disconnector is marked “G” and “H”, the right rail is marked with a small square. The flat on the underside of the slide is marked “0"" and ""G"".

Barrel Length: 5”

Sights / Optics: The front sight is a short rounded blade. The rear sight is a flat-top “U” notch dovetailed into the slide.

Stock Configuration & Condition: The grips are checkered walnut with smooth diamonds around the grip screws. The grips show light handling wear. The right panel has tool marmks around the screws. There are a few other scattered small marks. The checkering is well defined. There are no chips or cracks. The grips rate in Very Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is scattered minor erosion and stubborn copper fouling in the bore. In this writer's opinion, the bore rates 7+ out of 10.

Overall Condition: This pistol retains about 90% of its metal finish. The finish is thinning at all edges. The balance is mostly in evenly scattered faint oxidation, slightly more notable on the right-front of the slide. There is some scuffing on the top-right of the slide behind the front sight. There are a few other minor marks including a thin ""idiot mark"" under the slide stop on the left of the slide. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this pistol is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This pistol comes with a single two-tone 7-round lanyard-loop magazine.

Our Assessment: The 1911 and 1911-A1 pistols served the military of the United States from 1911 to 1985, through two World Wars and the Korean and Vietnam wars. They gained a reputation as a reliable handgun with plenty of stopping power, and are held in high regard by those who have used them. The design was the end-result of a series of developments by famous gun designer John Browning, starting with the Model 1900. The advances made by Browning were revolutionary at the time, and were so successful that they are considered commonplace today. Browning not only developed first a pivoting and then a tilting barrel to allow for a locked system, he developed the concept of ""the slide"", which is now synonymous with semi-automatic handguns.

This is a Colt Model 1911 that was made during WWI in 1917. The pistol has a brushed blue finish that was instigated in 1917 because the Army thought the bright blued finish was not durable enough. The pistol is in Very Good condition with 90% of its original finish remaining. The bore is strong with sharp rifling and the mechanics are still strong. This is a pistol which has light, honest wear, really quite nice for an issued sidearm in one of the most destructive conflicts in history, and will make a nice addition to a WWI small arms or 1911 specific collection. Please see our photos and good luck!

This is original WWI and WWII production .45 ACP ammo, manufactured by Frankford Arsenal. 2 are WWI era production from 1913 and 1914, one is a complete box, the other contains 18 rounds. The third is a complete unopened box, WWII era production from 1940. The boxes range from Fair to Very Good condition.

Make: Colt

Model: 80 Series M1991A1 Government Model O1991T

Serial Number: 2889440

Year of Manufacture: Modern

Caliber: .45 ACP

Action Type: Single-Action Semi-Automatic Pistol with Detachable Magazine

Markings: The left side of the slide is marked "COLT M1991A1 TM." The right side of the slide is marked "Colt Government Model." The right side of the frame is marked "COLT'S PT. F.A. MFG. CO. HARTFORD, CONN. USA," with the serial number "2889440" located above the trigger guard.

Barrel Length: 5 inches

Sights / Optics: The pistol is equipped with standard fixed sights, featuring a blade front sight and a notch rear sight.

Grip Configuration & Condition: The grips are textured with a snakeskin-like pattern and adorned with the Colt emblem. They are in new, unused condition, exhibiting no signs of wear.

Type of Finish: The pistol features a factory "Foliage Green" Cerakote finish, a TALO exclusive variant.

Finish Originality: Original

Bore Condition: The bore is bright and clean, with sharp rifling. In this writer’s opinion, the bore rates 10/10.

Overall Condition: This pistol is in new, unfired condition, retaining 100% of its original finish. There are no handling marks or imperfections. The mechanics are flawless, with a smooth slide action and a crisp trigger pull. As with all new firearms, a thorough cleaning is recommended before use.

Box, Paperwork & Accessories: The pistol comes in its original box, complete with all factory paperwork and accessories.

Our Assessment: This Colt M1991A1 Government Model is a TALO exclusive edition, featuring a distinctive "Foliage Green" Cerakote finish. TALO Distributors Inc. is known for collaborating with manufacturers to produce limited-run, exclusive firearms with unique features and finishes.

The 5-inch barrel and .45 ACP chambering adhere to the classic 1911 design, offering reliability and performance. The textured grips with the Colt emblem provide a secure hold and add to the pistol's aesthetic appeal.

For collectors and shooting enthusiasts alike, this limited-edition Colt M1991A1 represents a unique blend of traditional design and modern finishing techniques. Its new-in-box condition makes it a prime candidate for both display and practical use.

Make: Remington Rand

Model: 1911-A1

Serial Number: 1747284

Year of Manufacture: 1944

Caliber: .45 ACP

Action Type: Single Action Semi-Auto with Removable Magazine

Markings: The left side of the slide is marked “REMINGTON RAND INC. / SYRACUSE, N.Y. U.S.A.”, the rear face of the slide is marked ""G"" under the firing pin plate. The left of the frame below the magazine release and the top of the slide in front of the rear sight are marked with a “P” acceptance proof. The left side of the frame below the slide release is marked “FJA” (Frank J. Atwood Lt. Col., Sub-Inspector for Ithaca, Remington Rand and Union Switch). The right side of the frame is marked “UNITED STATES PROPERTY / NO. 1747284”, “M1911 A1 U.S. ARMY” and at the rear there is an Ordnance mark. The left of the trigger guard is marked ""4"", the right ""B"" and ""U"". The barrel is marked ""P"" on the left link-lug, ""F"" on the right. The top of the frame is marked ""G"" by the disconnector.

Barrel Length: 5”

Sights / Optics: The front sight is a short blade fixed to the slide with a serrated, ramped rear face. The rear sight is a square notch dovetailed into the slide.

Stock Configuration & Condition: The grips are checkered brown Keyes Fibre plastic with reinforcement rings around the screws and reinforcement ribs and a star on the inside. The grips have minor handling wear with a few light marks and one more notable ding on the right panel below the top screw. The checkering is well-defined. There are no chips or cracks. Overall, the grips are in about Fine condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is infrequent faint erosion in the bore. In this writer's opinion, this bore rates 9 out of 10.

Overall Condition: This pistol retains about 95% of its metal finish. The finish is thinning at some edges and corners, mostly on the leading edges of the slide. There is light handling wear in the grip areas. The action shows operational wear. There is a thin, light ""idiot mark"" under the slide-stop on the left of the frame. There are a few other minor marks. The screw heads are tool marked with strong slots. The markings are generally clear, the Ordance wheel is poorly struck, as is common. Overall, this pistol is in Very Good-Fine condition.

Mechanics: The action functions correctly. We have not fired this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This pistol comes with a single 7-round magazine marked ""R"" on the top of the floorplate. A canvas web-gear rig is included with belt, shoulder straps, leather M1916 pattern holster, M1923 pattern double magazine pouch, and sealed Carlisle Model First-Aid Packet with pouch.

Our Assessment: The 1911 and 1911-A1 pistols served the military of the United States from 1911 to 1985, through two World Wars and the Korean and Vietnam wars. They gained a reputation as a reliable handgun with plenty of stopping power, and are held in high regard by those who have used them. As was the case at the outset of the 1st World War, demands of the US Military would outstrip the production capacity of Colt when the United States entered World War II. In this case, contracting pistol production out to other companies had been planned for and simplified due to educational orders and a production study, notably conducted by the Singer sewing machine company, which developed comprehensive plans and instructions for a company which had never made a 1911A1 to order materials, machinery and set up manufacturing for the pistol.

Remington Rand was the star example of this project's success, and by the end of the war would go on to produce just about as many as all of the other maker's combined, at the lowest price and highest quality. This example was made by Remington Rand in 1944 and is a great example of a Remington Rand 1911-A1. The pistol is in Very Good-Fine condition, retaining about 95% of its parkerized finish. The pistol retains strong mechanics and a nice bore. This would make a great addition for a collector who wants to add a Remington Rand to a 1911 or WWII small arms collection. Please see our photos and good luck!

Make: Remington Rand

Model: 1911-A1

Serial Number: 1743965

Year of Manufacture: 1944

Caliber: .45 ACP

Action Type: Removable Magazine Fed Single Action SA Semi-Automatic Pistol.

Markings: This pistol has “UNITED STATES PROPERTY / NO. 1743965 / M 1911 A1 U.S. ARMY” along with an Ordnance stamp. The left side is marked “REMINGTON RAND INC SYRACUSE N.Y. U.S.A.” The right side of the frame is marked “FJA / P” The barrel is marked “P” The top of the slide is marked “P”. There is a “G” proof on the inside of the frame.

Barrel Length: 5”

Sights / Optics: The front sight is a small blade that is fixed to the barrel. The rear sight is a flat top square-notch that is dovetailed to the slide.

Stock Configuration & Condition: The grips are two-piece checkered plastic grips. The grips show minor wear. The checkering is sharp. There are no chips or cracks. The back strap is serrated. The grips are in excellent condition.

Type of Finish: Parkerized

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is well-defined. There is no erosion in the bore. In this writer's opinion, this bore rates at 9.5/10.

Overall Condition: This handgun retains about 99% of its metal finish. The balance of the finish shows light operational and handling wear. There are scratches throughout the pistol. Overall this pistol is in excellent condition.

Mechanics: The action functions correctly. We did not fire this handgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: One 7 Round Magazine

Our Assessment: The Remington Rand Model 1911-A1 retained many of the design elements of the original M1911, including its single-action, semi-automatic operation and seven-round magazine capacity. After World War II, the Remington Rand Model 1911-A1 remained in service with the U.S. military for several more decades, seeing action in subsequent conflicts such as the Korean War and the early years of the Vietnam War. It also found use with law enforcement agencies and civilian shooters for self-defense, target shooting, and competition.

Today, the Remington Rand Model 1911-A1 is highly sought after by collectors and enthusiasts for its historical significance and connection to World War II. Well-preserved examples of these pistols are prized for their craftsmanship, reliability, and role in shaping firearms history. Please see our photos and good luck on your bids.

Make: Union Switch & Signal Co.

Model: 1911-A1

Serial Number: 1047555

Year of Manufacture: 1943

Caliber: .45 ACP

Action Type: Single Action Semi-Auto with Removable Magazine

Barrel Length: 5”

Sights / Optics: The front sight is a short blade with a serrated, ramped rear face fixed to the slide. The rear sight is a square notch dovetailed into the slide.

Stock Configuration & Condition: The grips are Keyes Fibre two-piece checkered brown synthetic panels with reinforcement ribs on the inside and without reinforcement rings around the screws. The grips have light handling wear. There are some compressed checkers behind the bottom screw on the left panel with a few infrequent compressed checkers on the right. The checkering is generally well defined. There are no chips or cracks. Overall, the grips are in Very Good-plus condition.

Type of Finish: Du Lite

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is some light erosion in the bore, mostly in the grooves. In this writer's opinion, the bore rates 7 out of 10.

Overall Condition: This pistol retains about 96% of its metal finish. The finish is thinning at some edges. There are a few minor nicks, scuffs and scratches. There is a light """"idiot mark"""" under the slide stop on the left of the frame. The action shows minor operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this pistol is in Fine condition.

Mechanics: The action functions correctly. We have not fired this pistol. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This pistol comes with two 7-round magazines, heavily greased and wrapped in heavy greased paper. We unwrapped them enough to check the floorplates, one is marked """"S"""" (Scovill), the other """"L"""" (M.S. Little).

Our Assessment: The 1911 and 1911-A1 pistols served the military of the United States from 1911 to 1985, through two World Wars and the Korean and Vietnam wars. They gained a reputation as a reliable handgun with plenty of stopping power, and are held in high regard by those who have used them. As in the Great War, production demands of WWII required many manufacturers to produce military equipment for the war effort. While much of the small arms production was performed by arms manufacturers, there were also contracts that went out to other firms.

As the name suggests, Union Switch & Signal Co. produced switches and signaling equipment for railroads. They received a contract to produce 200,000 1911-A1 pistols, though the contract would be shortened with only 55,000 delivered to the government. This makes the US&S 1911-A1s the second rarest of all the manufacturers, behind only Singer who developed the educational material to allow non-firearms manufacturers to swiftly tool up to produce 1911 pistols. It is believed that when the drawings were originally delivered to US&S, the """"P"""" proof mark on the slide was not included, leading to the early production US&S pistols, such as this one, not having the mark at all. When this was discovered, Ordnance requested that the marking be added to the pistol, but it appears that the location was not clear, with interim production guns having the marking notably left of center. The later production pistols had the marking in the same location as other makers.

This example is a great find for collectors with its original DuLite finish. The pistol retains about 96% of its original finish with strong mechanics. This pistol should garner a lot of interest from the collectors of WWII pistols, and 1911s in particular. Please see our photos and good luck!

Make: Colt

Model: M45A1 CQBP Commercial, 01070CQB

Serial Number: 09186EGA

Year of Manufacture: 2013 (https://www.colt.com/serial-lookup)

Caliber: .45 ACP

Action Type: Single Action Semi-Auto with Removable Magazine

Markings: The left side of the slide is marked “COLT *** USMC”. The right side of the slide is marked “COLT GOVERNMENT MODEL”. The left of the trigger guard is marked with a “VP” in a triangle. The right side of the frame is marked “COLT’S PT. F.A. MFG. CO. HARTFORD, CONN. U.S.A.” and the serial number is behind and above the trigger. The right side of the dust cover is marked with a QR code and “(17V) 13629 / (1P) M1070CQBP / (S) 09186EGA” and “U.S.”. The barrel is marked “-COLT 45 AUTO N.M.-”. The firing pin retention plate is marked “1”.

Barrel Length: 5”

Sights / Optics: The front sight is a Trijicon blade with a slightly ramped rear face and inset tritium lamp, dovetailed to the slide. The rear sight is a square-notched Novak base with one inset tritium lamp to each side of the notch that is dovetailed into the top rear of the slide. The front sight lamp has dimmed completely, the rear lamps have dimmed somewhat but are still useable in very low-light environments.

Stock Configuration & Condition: The grips are textured G10 panels. There is no notable wear or damage to the grips. There are only light handling marks. There are no chips or cracks. Overall, the grips are in Excellent condition.

Type of Finish: Tan Cerakote

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore.

Overall Condition: This pistol retains about 98% of its metal finish. There is only faint operational wear and some light handling marks. The screw heads are sharp. The markings are clear. Overall, this pistol is in Excellent condition.

Mechanics: The action functions correctly. The trigger breaks crisply. The slide has barely perceptible play to the frame. We did not fire this handgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This pistol comes in a green Colt-branded Pelican case with a cardboard shipping sleeve with the serial-matching label, Colt branded Otis cleaning kit, a total of two 7-round Wilson Combat magazines, a cable lock, and an assortment of factory paperwork including manual and test-target.

Our Assessment: On July 20, 2012, about 101 years after the 1911 was first adopted by the U.S. Armed Forces, the M45A1 was adopted by the Marine Corps for use by several of their Special Operations Capable units as well as their pistol shooting team. Dubbed the Close Quarters Battle Pistol or CQBP, the pistol has several upgrades over the original Model of 1911, including front and rear slide serrations, night sights, accessory rail, extended beavertail grip safety, skeletonized hammer, ambidextrous thumb safety, National Match barrel and Cerakoted stainless steel slide and frame.

This pistol is a commercially sold example, serialized in the same range as the USMC used pistols. As one of the earliest commercial M45A1s, the pistol was hand-fit by the gunsmiths of the Colt Custom Shop and shipped in a Colt-branded Pelican case with a Colt-branded Otis cleaning kit and two Wilson Combat magazines. The pistol is in excellent condition, and it appears to have spent more time in the Pelican case than out. This pistol is a must-have for any U.S. Military pistol collection or 1911 collection.

Make: Frank Haugh

Model: Custom Bolt Action

Serial Number: 82085

Year of Manufacture: Modern

Caliber: .338 Winchester Magnum

Action Type: Bolt Action

Markings: The barrel is marked "Frank Haugh - Metal Smith - Milan, Ind." The caliber marking "338 Win" is present on the receiver, along with the serial number.

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade fixes to the top of a serrated ramp that is integral to a boss fixed to the muzzle. The rear sight is a v-notch with 2 folding leafs dovetailed to a block that is fixed to the barrel. This rifle is equipped with a Zeiss West Germany Diavari-C 3-9x36 scope. The scope features adjustable magnification from 3x to 9x, providing excellent versatility for various shooting ranges. The glass clarity is superb, consistent with Zeiss's reputation for high-quality optics. The scope body shows light handling marks, but it is in overall excellent condition. The reticle is clear, and the adjustments function as intended.

Stock Configuration & Condition: Jack Haugh built this customer stock. The stock is a deluxe-figured walnut with checkering at the forearm and the capped sem-pistol grip. The pistol has a fluted straight comb with cheek piece and a rosewood forend cap. The finish shows minimal handling wear, with a glossy surface and some light marks from storage. The grip rates in about excellent condition.

Magazine Quantity & Condition: Internal magazine with a hinged floorplate.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright with sharp rifling. There is no visible erosion, and the bore rates in about 9/10 condition.

Overall Condition: This rifle retains about 95% of its metal finish. The balance of the finish shows light handling marks, primarily on the barrel and bolt handle. The screw heads are sharp. The markings are clear and legible. Overall, this rifle rates in about excellent condition.

Mechanics: The action functions correctly. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: This custom bolt-action rifle chambered in .338 Winchester Magnum is a beautifully crafted firearm, showcasing exceptional workmanship by Frank Haugh, a metal smith from Milan, Indiana. The deluxe figured walnut stock and quality blue finish make this rifle not only functional but also a collector's piece. The .338 Winchester Magnum is a versatile and powerful caliber, suitable for large game hunting and long-range shooting. This is an excellent opportunity to acquire a precision-built custom rifle. Please look at our high quality photos and good luck on you bids!

Make: Parker Brothers

Model: (Plain Twist) Grade Hammer Gun

Serial#: 7278

Year of Manufacture: 1876

Gauge: 12 Gauge, 2 5/8"

Choke: Left: Cylinder Bore, Right: Cylinder Bore, both Fixed

Action Type: Side by Side, Lifter-Opened, External Hammer, Double Trigger Shotgun with Extractor

Markings: The top of the barrel rib is marked “PARKER BROS” MAKERS” MERIDEN. CONN PLAIN TWIST””. The bottom of the right barrel is marked “T” and on the flat with “5 12”. The left of the barrel lug is marked “T3832”, the rear face of the lug is marked “7278”. The forend iron is marked “7278”, the wedge is marked “278”. The water table is marked “7278”. Each lockplate has “PARKER BROS””. The bottom tang is marked “7278”. The trigger plate is marked PATD NOV. 18. 1866 / “ MAR.23.1875".

Barrel Length: 32”

Sights/ Optics: There is a silver-colored post at the front of the rib.

Stock Configuration & Condition/ Grip: The stocks are two-piece smooth walnut with steel-tip splinter forend, barrel wedge, capped pistol grip, straight comb, and steel buttplate. The stocks have some scattered nicks, dings, scuffs and scratches. The buttstock is split on both sides at the buttplate. The LOP measures 14 3/8" and 13 1/2" from the fronts of the triggers to the back of the buttplate. The plate has been polished to white with some scattered nicks and minor surface erosion. Drop at comb is approximately 2”, drop at heel 3”. Overall, the stocks are in Good condition as Antique.

Type of Finish: Browned & Case Color

Finish Originality: Original

Bore Condition: The bores are gray. There is scattered light erosion in the bores. In this writer’s opinion, the bores rate 6 or 7 out of 10.

Overall Condition: The shotgun retains about 5% of its metal finish. The remaining finish is mostly on the interior of the forend iron. Other surfaces have turned to a dark patina.. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible. Overall, this shotgun is in Good-plus condition as Antique.

Mechanics: The action functions correctly. The barrel locks to the frame with no play. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box Paperwork and Accessories: None.

Our Assessment: This particularly early Parker Brothers Under-Lifter Hammer gun comes to us from all the way back in 1876, just two years after their initial production. The earliest guns had an interesting mechanism with a release lifter on the bottom of the receiver paired with twist steel barrels and exposed hammers. For a 150 year old gun, this example is in shockingly good shape, retaining original finish and in its original configuration. The gun shows some honest wear, with some minor dents in otherwise quite good bores being the most notable defects. The overall condition of the gun and its quite early production would make it a great addition to any collection, especially an avid Parker collector.

Print Catalog Description: This Parker Brothers Under-Lifter Hammer Gun, Serial Number: 7278, was made in 1876. It is chambered in 12 Gauge (2 5/8"), with 32” barrels. The stocks are two-piece smooth walnut, featuring a steel-tip splinter forend secured by a barrel wedge, capped pistol grip, straight comb, and steel buttplate; the stocks rate Good as Antique condition, displaying scattered nicks, dings, scratches, and splits on both sides at the buttplate. The Browned & Case Colored finish is Original, with approximately 5% retained, mostly within protected areas. Overall condition is Good-plus as Antique, exhibiting a dark patina with operational wear and clearly legible markings. The bores rate approximately 6-7/10. Action functions properly. This Parker Brothers Under-Lifter represents a historically significant early production shotgun from one of America's most esteemed manufacturers. With its distinctive lifter-operated action, exposed hammers, and plain twist barrels, it provides collectors with a valuable glimpse into shotgun technology of the late 19th century. Despite modest cosmetic wear consistent with age, this antique shotgun remains mechanically sound, offering substantial appeal to collectors and enthusiasts of classic American firearms, particularly early Parker shotguns.

Make: Purdey J & Sons Ltd

Model: Percussion Double Barrel

Serial Number: 3199

Year of Manufacture: 1837, Antique

Gauge: 12 Bore

Action Type: Side by Side, Double Hammer, Side-Lock, Percussion Black Powder

Markings: Both lock plates are marked “PURDEY”. The bottom of each barrel is marked with a series of proofs. The hammers, lock plates, bottom metal, tangs, and barrels are engraved.

Barrel Length: 27 1/2"

Choke: Both bores are Cylinder, fixed.

Sights / Optics: The front sight is a small blade fixed to the front of the barrel rib. The rear sight is a folding v-notch leaf that fits flush with the barrel rib when down.

Stock Configuration & Condition: The stock is one piece checkered Birdseye Maple with a straight grip, straight comb with cheek piece, engraved steel buttplate, patchbox, and barrel wedge. The LOP measures 14 1/2” and 13 1/2” from the fronts of the triggers to the back of the buttplate. The plates are mostly worn to white with scattered light freckling. The stocks have been finished over. There is a minor crack at the rear of the buttstock revealed under the patch box door. There is another small crack in the front of the forend behind the metal forend tip. The stock rates in about Very Good overall condition as Antique.

Type of Finish: Blue & Case-Color

Finish Originality: Refinished

Bore Condition: The bores are dark with corrosion and erosion. There is no notable heavy pitting. The bores rate 3/10.

Overall Condition: This shotgun retains about none of its metal finish. The barrels have a few scattered light impact marks, light wear and some finish going to a patina. The receiver, lockplates, hammers and top tang are mostly worn to silver and white. The screw heads range from sharp to lightly tool marked with strong slots. The pin heads are unmarred. The markings are legible. The right hammer has been repaired. The inlay on the top of the wrist has been removed. The nipples appear serviceable though are slightly marred. There is intermittent erosion on the barrels, particularly around the muzzle. There is corrosion on the receiver around the nipples. Overall, this shotgun rates in about Very Good condition as refinished Antique.

Mechanics: The action functions correctly. The hammer springs are strong. The barrels lock up with no play to the receiver. Half-cock safety. We have not fired this shotgun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This shotgun comes with a ramrod. The rod has a few minor cracks but remains structurally sound.

Our Assessment: This exquisite Purdey Double Barrel Percussion Shotgun, Serial Number 3199, was masterfully crafted in 1837 and embodies the legendary quality synonymous with the Purdey name. Chambered in 12 Gauge with beautifully proportioned 27 1/2" barrels, it represents both historical significance and refined artistry. The stock, carved from striking Birdseye Maple, exhibits remarkable figure and character, maintaining a Very Good condition rating for an antique firearm. Although the stock has undergone refinishing, the natural allure of the maple grain shines distinctly throughout, complementing the gun's elegant aesthetic. While the original case coloring has gracefully faded to a distinguished silver patina, the firearm's intricate engravings remain exceptionally crisp and visually captivating, showcasing craftsmanship that has endured nearly two centuries. The bores rate at approximately 3/10, displaying honest wear consistent with age but notably free from any significant pitting or structural defects. Mechanically, the action remains sound, demonstrating smooth and proper functionality. This exceptional Purdey percussion shotgun not only holds value as a collector's piece but also provides a tangible connection to the rich heritage of fine gunmaking. For over two centuries, Purdey has defined elegance, prestige, and exceptional quality in the world of fine shotguns, even earning a Royal Warrant from King Edward VII as "Gunmakers to the King." Established in 1814, Purdey shotguns have been cherished by royalty and discerning collectors alike, embodying exquisite craftsmanship and timeless beauty—the true essence behind the phrase, "She's awful purdey." With its rich engravings and impressive condition, this Purdey Double Barrel Shotgun is more than just a firearm; it's a classic heirloom destined to be treasured for generations.

These vintage railroad lanterns are nothing short of amazing relics of railroading history! Each lantern was a crucial part of railway signaling, guiding trains through the night, warning crews of hazards, and ensuring smooth operation on the tracks. From the Dietz Beacon Dash Lamp, once mounted to early vehicles or rail equipment to cut through the darkness, to the blue and red signal lanterns, which played vital roles in train movements, these are true gems of industrial craftsmanship that transport us back to the heyday of American railroads!

The blue-lensed lantern is a fantastic find, as blue lights were commonly used for safety markers or designated equipment that should not be moved—meaning this lantern once played a direct role in keeping railroad workers safe. Meanwhile, the red-lensed lantern is a classic stop signal, marking the rear of trains, switch stands, or crossing warnings. Both lanterns still have their original vibrant lenses, showing off the bold colors that once cut through the darkness and guided locomotives on their journey. Their aged metal frames and well-earned patina add even more character, making them perfect for collectors, history lovers, or railroad enthusiasts! These aren’t just old lanterns—they’re pieces of history that tell the story of the iron rails that built a nation!

Such was the need for fighting knives during WW2 that many small independent knife makers stepped up to supply our boys with well crafted edged weapons. San Antonio Iron Works of San Antonio, Texas made fighting knives from cutdown blade portions of surplus M-1913 “Patton” sabers, and today, these San Antonio Iron Works knives remain scarce and desirable. This US Army WW2 San Antonio Iron Works Patton Saber Middle Section Sword Blade Fighting Knife is in Very Good Condition, with some sharpening to the blade edges, some scratching and patina at each side of the blade, some light loosening to the guard, some light chipping and hairline cracking to the spines of the handle scales, some verdigris to the left side of the handle scale rivets, and with some light overall age wear evident. Most interestingly, it features an 8" clip point bowie, full length fullered, double edge dagger blade with an unsharpened top false edge crafted from the middle section of a M-1913 Patton saber, sports elegant brown hardwood handle scales with finger grooves secured by two brass rivets, and boasts a long, wide steel guard with downturned ends. It’s complete with the original US Army WW2 San Antonio Iron Works Tooled Brown Leather Scabbard in Very Good Condition, with some light scattered darkening at front and back, remaining just a bit too short to fully accept the blade, resulting in a small gap between the throat and guard, and with some light overall age wear evident. Most interestingly, it bears gorgeous “spade” central and “seashell” border tooling running vertically along the middle front, carries a fully functional metal “glove” snap closure leather handle retention strap at the middle front belt hanger, and exhibits the US Army officer’s “O” prefixed laundry number “O-7190” stamped in black at the middle and upper back. Both the knife and sheath are correctly unmarked as to their maker, as are all of those made by San Antonio Iron Works, and the set is a fine example of a very rare, original US Army WW2 San Antonio Iron Works Patton Saber Middle Section Sword Blade Fighting Knife.

This vintage Southwest satchel pouch captures the bold artistry and spirit of the American Southwest, beautifully executed in the Chimayo style. Measuring approximately 11 inches by 10 inches, this pouch features a striking embroidered horse motif at the center, flanked by vivid geometric patterns in classic desert hues—burnt orange, turquoise, and earth tones. The design pays homage to traditional weaving and embroidery styles of New Mexico’s Chimayo region, known for its vibrant wool textiles and deep cultural heritage. Crafted from a coarse woven fabric, likely a wool or wool blend. This piece likely dates from the mid-20th century, when interest in Native American and Southwestern arts surged during the postwar tourism boom in the Four Corners region. Whether displayed as a collectible textile or worn as a statement accessory, this pouch is a colorful and authentic expression of Southwestern folk artistry. With its charming horse embroidery and time-earned character, it offers a warm connection to regional tradition and frontier flair. A perfect addition to any Western or vintage textile collection.

This beautifully handcrafted Native American shield features a painted buffalo skull set against traditionally tanned deer skin leather, blending bold visual artistry with deep cultural symbolism. The buffalo, sacred among Plains tribes, represents strength, endurance, and spiritual protection, while the deer hide reflects authentic craftsmanship rooted in ceremony and respect for nature. The painted skull adds a powerful focal point, shields like these were intended for ceremonial or decorative use rather than combat. With its natural textures, and striking presence, this piece stands as a tribute to Native artistry and storytelling. This is a compelling display item for collectors of Native American art or Western decor, this shield carries the spirit of the Plains in both form and meaning.

These handcrafted Native American dolls, created by the Fast Horse family of Rapid City, South Dakota, showcase exceptional artistry and cultural significance. Signed and dated September 27, 1979, these pieces feature intricate beadwork by Zelda Fast Horse, highlighting the craftsmanship passed down through generations. The dolls are dressed in traditional regalia, with carefully detailed attire, beaded accessories, and fur-trimmed footwear, embodying the spirit and heritage of the Lakota people. The expressive wooden faces, painted with ceremonial markings, add to the authenticity and uniqueness of each figure.

These statues are not only remarkable for their aesthetic appeal but also as important cultural artifacts. The Fast Horse family’s dedication to beadwork and doll-making preserves an essential part of Native American heritage, reflecting both tradition and personal artistry. The combination of materials, from hand-sewn fabric to natural fur and wooden bases, emphasizes a deep respect for traditional craftsmanship. These dolls stand as a testament to the enduring legacy of Indigenous artisans, making them valuable collectibles for those who appreciate authentic Native American art.

This is a classic 1950s Daisy Targeteer No. 118 spring-piston air pistol, complete with its original factory box, two original stamped-metal targets, and two original tubes of .118-caliber BBs. Originally marketed as an indoor target shooting set for young shooters, the No. 118 was a continuation of the Targeteer line first introduced in the 1930s. By the 1950s, this model had become a household name in American recreational shooting. The box has some holes from using it for its intended target purpose. The BB gun functions correctly, and is in Good condition, showing the wear of a beloved childhood toy. This is a nostalgic piece of mid-century Americana, this Daisy Targeteer set captures the charm of postwar youth culture and remains a prized find for collectors of vintage airguns and classic toys alike.

These striking vintage cowboy spurs from the 1940s capture the spirit and style of the Old West with eye-catching embellishments and bold Western flair. The standout features of this pair are the large spade rowels and the engraved "gal leg" heel bands—each designed in the shape of a woman's leg, complete with high-heeled boots, a cheeky nod to classic Western iconography popular during the mid-20th century. Spurs like these were more than just functional gear; they were expressions of personal style and cowboy culture. The 1940s saw a resurgence of romanticized Western imagery in Hollywood films, rodeos, and trick-riding performances. As such, many cowboys and showmen sported ornate, custom spurs that blended traditional motifs with playful or risqué designs like the ones seen here. These spurs feature deeply tooled leather straps, aged to a rich patina with natural wear from use and display. The metalwork shows intricate engraving along the heel bands and shanks, with a silver-nickel finish now showing a warm, timeworn character. The large 6-point spade rowels spin freely and add an authentic jingle when in motion. Whether displayed as part of a Western collection or worn for reenactments or cowboy action shooting, these embellished 1940s spurs are a classic representation of cowboy heritage with a twist of humor and charm.

This is a beautiful example of a classic Fur Trappers bear trap. The finish shows patina and surface oxidation giving it that classic mountaineer esthetic. Between the jaws is a deer bone used to show how these traps function, as well as giving the trap an elevated trapper cabin appearance. The springs are incredibly strong and this trap appears to be fully functional. This is an absolute must have piece for any man cave or mountaineering history lover.

These fringed buckskin leather pants are a classic relic of the American frontier, evocative of the rugged spirit of 19th-century pioneers, trappers, and scouts. Crafted from soft, supple buckskin—likely deerskin—these pants feature long side fringe running down each outer leg, a hallmark of traditional Western dress that served both functional and decorative purposes. The fringe helped to shed rain and added mobility in the brush, while also making a bold visual statement associated with the frontier lifestyle. Dating to the late 1800s, these trousers were most likely handmade, as indicated by the uneven stitching and natural shaping of the leather. The design is consistent with garments worn by frontiersmen, Plains Indians, and Western cowboys in the post-Civil War era. Buckskin was highly valued for its durability, quietness in movement, and resistance to wind—qualities that made it a staple for survival in the vast and often harsh Western territories. The pants show signs of age and use, including darkened areas, scattered small holes, and minor seam separation, all of which contribute to their authenticity and vintage appeal. The waistband is fashioned with stag buttons, and the overall cut is loose-fitting to allow ease of motion, whether on horseback or navigating rugged terrain. These buckskin pants are a fantastic example of utilitarian clothing in the old west, and a must have for historians and collectors alike.

This antique brass spittoon, marked "M.B. Co.", is a relic of the American Old West, dating back to 1888. Spittoons were a common sight in saloons, hotels, banks, and other public spaces during the late 19th and early 20th centuries, providing a designated receptacle for tobacco chewers. This particular example, crafted from solid brass, features a flared rim and weighted base to prevent tipping—hallmarks of well-made spittoons of the era. The "M.B. Co." marking likely refers to the Manning, Bowman & Co., a well-known metalware manufacturer operating in the late 19th century, producing high-quality brass and silver-plated items. The patina and natural wear on this spittoon add to its authenticity and charm, making it an excellent piece for collectors of Old West memorabilia or antique tobacciana. This spittoon would have sat in the corner of a bustling saloon, near a wooden bar where cowboys, lawmen, and travelers gathered for a drink and a game of cards. Today, it serves as a tangible piece of history, evoking the rugged character of the American frontier. Whether displayed in a Western-themed collection or as a standalone conversation piece, this 1888 brass spittoon is a remarkable survivor from a bygone era.

Antique iron strongbox with "Wells Fargo & Co. Black Hawk, Colo." stenciled in yellow paint on the front, suggesting historical use in the late 19th or early 20th century. The box shows a strong patina, indicating significant age and exposure to the elements, yet retains its sturdy construction. The interior shows its original red paint, and a photograph inside shows an old Western-themed arrangement with the strongbox, a revolver, and a cowboy hat. The side handles feature ornate, decorative metalwork, further enhancing its vintage appeal. This piece likely served as a secure transport or storage container for money, valuables, or documents during the Wild West era, making it a fascinating relic of American frontier history.

Step back in time with this breathtaking Antique Late 19th Century English Victorian Lady's 12-Piece Vanity Kit, a true masterpiece of Victorian craftsmanship and elegance! Housed in a striking black lacquered box adorned with intricate brass and mother-of-pearl inlays, this piece exudes luxury and history. The interior is lined with rich crimson velvet, creating a regal display for the beautifully crafted glass bottles and silver-plated compartments. Designed for a refined lady of the era, this set would have held various personal care items, each stored meticulously within the fitted compartments. Adding to its charm, the spring-loaded hidden mirror mechanism adds an element of surprise and ingenuity, a hallmark of Victorian design.

This extraordinary vanity case is more than just a decorative piece—it's a tangible link to a world of opulence and tradition. Whether displayed in a collection of fine antiques or used as an elegant storage solution, this box tells a story of refinement and attention to detail. The exquisite marquetry and delicate engravings make it a showstopper, perfect for collectors and history enthusiasts alike. Don't miss the opportunity to own this stunning relic of the Victorian era!

This is a finely crafted antique meerschaum pipe featuring an intricate hand-carved depiction of a reclining nude woman emerging from a seashell, reminiscent of classical or mythological themes. The pipe's bowl is adorned with detailed shell and wave motifs, enhancing its artistic appeal. The amber-hued stem, made from meerschaum, complements the warm patina of the meerschaum, which has aged beautifully over time. The pipe is housed in a custom-fitted velvet-lined case, suggesting it was a prized possession, possibly from the late 19th or early 20th century. This exquisite piece is not only functional but also a work of art, appealing to collectors of fine smoking instruments and antique tobacciana.

This exquisite meerschaum pipe showcases a highly detailed, hand-carved design featuring a classical depiction of a nude woman, possibly representing Venus, emerging from a seashell. The intricate carving includes delicate shell textures and flowing hair, emphasizing the craftsmanship and artistry involved. The pipe’s natural patina adds to its antique charm, highlighting the organic tones of the meerschaum material. The stem, made of a rich brown material, provides a striking contrast to the ivory-like bowl. Encased in a fitted case with a silk-lined interior stamped with "Carl Hiess GRABEN No 8 WIEN," this pipe is not only a functional smoking instrument but also a collectible piece of fine art.

These impressive early 1900s outdoorsman’s gauntlets are a striking example of turn-of-the-century frontier gear, blending rugged utility with exceptional craftsmanship. Made from genuine bearskin fur and heavy-duty leather, these gauntlets were designed to endure the harshest wilderness conditions—offering both warmth and protection for trappers, hunters, and frontiersmen who braved the elements during long expeditions. The bearskin backs provide superior insulation against cold weather, while the supple leather palms and cuffs ensure durability and flexibility for handling tools, firearms, or reins. The wide, flared cuffs would have helped keep snow and wind from entering the sleeves, a crucial feature in the unforgiving outdoors. These gauntlets likely saw use in the northern United States or Canadian territories, where fur trapping and frontier survival were still very much a way of life. They remain in Very Good condition for their age, with no rips, tears, or major damage. The leather is supple and the fur retains excellent density and color. Sized to fit large hands, these gloves are not only a remarkable artifact of early wilderness survival gear but also a compelling display piece for collectors of antique outdoor equipment, fur trade relics, or early 20th-century Americana

This charming antique booklet, titled Cowboy Life, offers a vivid pictorial glimpse into the romanticized era of the American cowboy. Produced in the early 1900s, likely between 1905 and 1915, it captures the public fascination with the rugged frontier life that had already begun to fade into legend by the turn of the century. Small in size but rich in content, this booklet features black-and-white illustrations and early halftone photographs portraying daily cowboy activities—ranching, roping, riding, and campfire scenes—each image accompanied by a short caption or narrative snippet, including a portrait of Buffalo Bill. Printed during the peak of America's "Wild West" nostalgia period, this piece was likely a souvenir or part of a dime-novel series marketed toward young readers and urban dwellers eager to experience the mythos of the Old West from afar. It reflects the era’s blend of fact and folklore, and showcases the growing influence of western-themed media on popular culture. The booklet is in remarkably good condition for its age, with intact binding, legible print, and only moderate wear consistent with careful handling over a century ago. Whether you're a collector of vintage Americana, early Western memorabilia, or historical ephemera, this piece is a rare survivor from a bygone age of storytelling and frontier fascination.

These striking antique leather wrist cuffs date to the 1920s and capture the rugged spirit and craftsmanship of the American West. Crafted from thick, high-quality leather, each cuff features ornate hand-tooled floral designs—an iconic motif in Western leatherwork—along with decorative metal studs that add both flair and function. The cuffs are constructed with a buckle-style closure and show the rich patina that only comes with decades of age and use. These cuffs were likely worn by working cowboys or rodeo hands during a time when such gear served both practical and stylistic purposes. Leather wrist cuffs helped protect the wrists from rope burns, brush, and the general wear-and-tear of ranch work. At the same time, their decorative embellishments offered a touch of individuality in the dusty, rough-and-tumble world of the West. Their combination of functionality, vintage style, and historical appeal makes these cuffs a rare survivor from a bygone era. Whether you're a collector of Western Americana, a costume enthusiast, or simply drawn to authentic frontier craftsmanship, these 1920s cowboy wrist cuffs are a wearable piece of history.

his exquisite antique tramp art box is a true masterpiece of hand-carved craftsmanship. Featuring intricate floral motifs on the lid and front panel, along with meticulously detailed chip-carved borders, it exudes charm and elegance. The warm, rich patina highlights the depth of the carvings, showcasing the skill and artistry of its maker. The presence of a keyhole and key adds a functional touch, suggesting it was designed to hold cherished keepsakes securely.

Likely dating from the late 19th to early 20th century, this beautifully preserved piece reflects the timeless appeal of tramp art, a folk tradition celebrated for its resourceful and artistic woodwork. Its floral designs, particularly the stunning roses on the lid, lend it a romantic and sophisticated character. Whether as a collectible or a statement piece, this box is a wonderful example of historic craftsmanship that continues to captivate and inspire.

In the 1920s, fresh off of lucrative World War 1 military contracts, the legendary Winchester Repeating Arms Co. sought to diversify from a manufacturer of firearms and ammunition to a broad-based gun, hardware, and sporting goods operation. This included expanding into household products, even items as utilitarian as meat grinders. This Vintage 1920s Winchester Repeating Arms Co. No. W12 Table Top Meat Grinder is in Good Condition, with some overall scratching, patina, and age wear evident. Most interestingly, it’s complete, remains fully functional, and is marked “No. / W12. / WINCHESTER” in relief at one side of the extruder, along with “WINCHESTER REPEATING ARMS CO. NEW HAVEN, CONN.” on the handle. A fine example of an original Vintage 1920s Winchester Repeating Arms Co. No. W12 Table Top Meat Grinder.

This exquisite three-piece cutlery set from the 1920s showcases Winchester’s craftsmanship beyond their legendary firearms, featuring a stunning combination of stag horn handles and sterling silver fittings. The set includes a carving knife, a carving fork, and a sharpening steel, each designed for both functionality and elegance , as well as an embossed leather display sheath with velvet to preserve and show off this set. The metal has tarnished slightly from age. The markings are sharp. The stag handles are in Very Good condition. This is a must have for collectors and hunters alike, being perfect for special occasions.

Make: Winchester

Model: 98 Breech Loading Signal Cannon

Serial Number: 798

Year of Manufacture: 1908-1955

Caliber: 10 Gauge BLANK ONLY

Action Type: Breech-Loading Blank-Firing Signal/Salute Cannon

Barrel Length: 12"

Approximate Overall Dimensions, Assembled: W: 8", H: 8", L: 16"

Sights / Optics: None.

Stock Configuration & Condition: The gun is mounted on a cast iron carriage with black enamel finish. The carriage shows scattered wear and some minor oxidation. The markings on the carriage are clear. Overall, the carriage is in about Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is dark with scattered erosion and pitting. In this writer’s opinion, the bore rates 5+ out of 10.

Overall Condition: This gun retains about 10% of its metal finish. Finish remains mostly around the mounting bracket. Most surfaces have worn to white. There is scattered minor oxidation. There are some light nicks and small scratches. The markings are clear. Overall, this cannon is in Good condition.

Mechanics: The action functions correctly. We did not fire this gun. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: This gun comes with the carriage mount as described, the cannon is housed in a wood dovetail crate with lid (standard crate). A portion of the crate's lid is missing and the crate shows scattered wear.

Our Assessment: Originally offered in Winchester’s 1903 catalog, the 98 Breech Loading Signal Cannon is a 10 Gauge blank-firing cannon intended for signaling and saluting celebrations such as the 4th of July as well as good clean fun firing off black powder blank shells. Produced for more than a century, production was licensed to the Bellmore Johnson Company just a few miles from the original Winchester factory in 1975. This is an original Winchester-made signal cannon made beween 1908 and 1955. This will be a great addition to any Winchester collection as well as being a fun piece to take out to the range. Please see our photos and good luck!

Make: New Haven Arms Co.

Model: 1860 Henry

Serial Number: 8010.

Year of Manufacture: Ca. 1865

Caliber: .44 Henry Rimfire

Action Type: Lever Action with Slotted Full-Length Tubular Magazine

Markings: The top of the barrel is marked “HENRY’S PATENT OCT. 16, 1860 / MANUFACT’D BY THE NEW HAVEN ARMS CO. NEW HAVEN, CT.” and at the receiver with “8010.”. The left side of the lower tang is marked “8010”, found again stamped on the inside of the buttplate at the toe and the top tang inlet of the stock. The magazine sleeve and the barrel under the sleeve each have assembly number "718".

Barrel Length: 24", Octagonal

Sights / Optics: The front sight is a contoured brass blade in a collar screw-set to the barrel at the muzzle end. The blade is likely a period replacement. The rear sight is a folding ladder-style sight. The rear sight presents a “V”-notch when folded down. When folded up, the ladder has a “V”-notch slider and is graduated from 2-8 in 100s of yards. There is a notch at the top of the ladder marked “90”.

Stock Configuration & Condition: The stock is smooth walnut with a sling swivel mounted to a plate on the left side below the comb (there is a sling mount on the left of the barrel assembly between the magazine and barrel). The swivel rotates easily on its mounting plate and pivots properly on its stud. There is a Henry “bump” below the sling swivel. The buttplate is a brass crescent plate with a trapdoor over a storage compartment (there is nothing in the compartment). The stock has scattered nicks, dings, scuffs and scratches. There is a thin crack at the rear of the top tang. There is a defined circle of wear around the sling swivel. The LOP measures 13 3/8" from the front of the trigger to the back of the buttplate. The plate has light wear with scattered light nicks and has the crystalline appearance of old brass. Overall, the stock is in Very Good condition as Antique.

Type of Finish: Blue Barrel, Case Color Lever, Hammer & Trigger, Brass Receiver

Finish Originality: Original

Bore Condition: The bore is semi-bright with well defined rifling. There is some scattered light erosion and pitting in the bore. In this writer's opinion, the bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 35% of its metal finish. There is some blue along the grooves between the barrel and magazine, mostly around the sling mount and the sleeve limiting screw on the right. Otherwise, the barrel assembly has mostly worn to white or gone to a light patina with scattered minor surface erosion and some nicks and scratches. The receiver has some nicks, scuffs and scratches, there are some light tool marks at the top edges of the sideplates. The receiver has the crystalline appearance of old brass. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible. Overall, this rifle is in Fine condition as Antique.

Mechanics: The action functions correctly. The hammer does not have a half-cock safety. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Henry rifle was designed in 1860. Sources aren’t clear about exactly when it began production, but by 1866 about 14,000 had been manufactured. At that time, New Haven Arms became Winchester Repeating Arms Company and the Henry evolved into the M1866 Winchester. A few thousand Henry Rifles were purchased by the Union during the Civil War and many more were privately purchased by Union soldiers. It quickly became known as the “rifle that you could load on Sunday and shoot all week long”. We can’t imagine what it must have been like for the Confederate troops to have faced these rapid firing rifles armed with only their muzzleloaders, but there were only a few Civil War battles where the Henry played a decisive role, one of which was the Battle of Franklin.

This rifle was made ca. 1865, either right at the end of or shortly after the Civil War. The serialized parts match with matching assembly numbers on the barrel and magazine sleeve. The rifle has surprisingly strong mechanics for such an old gun and the bore is in equally good condition given its age. Any Henry will make a great addition to a collection of lever action rifles, Winchesters, or early repeating cartridge firearms, and we’re sure this one will be no exception. Please see our photos and good luck!

Make: New Haven Arms

Model: 1860

Serial Number: 5570

Year of Manufacture: 1864

Caliber: .44 Henry Rimfire

Action Type: Lever Action with Tubular Magazine

Markings: The top of the barrel is marked “HENRY’S PATENT OCT. 16, 1860 / MANUFACT’D BY THE NEW HAVEN ARMS CO. NEW HAVEN, CT.” and “5570”. The left of the lower tang is marked “5570”, also in the upper tang inlet of the wrist. The inside of the buttplate at the toe is marked ""1918"".

Barrel Length: 24""

Sights / Optics: The front sight is a german silver blade in a collar screw-set to the barrel at the muzzle end. The rear sight is a two-position folding sight with two different ""V""-notches. It appears to be a modified original ladder-style sight with the ladder arm mostly removed and a notch deepened at the center. The detent spring is missing, a shim has been installed. The sight is loose in the dovetail and will fall out.

Stock Configuration & Condition: The stock is smooth walnut with a sling swivel mounted to a plate on the left side below the comb (there is a sling mount on the left of the barrel assembly between the magazine and barrel). The buttplate is an early style brass crescent plate with a soft point at the heel and a trapdoor over a storage compartment (nothing in the compartment). The stock has a repaired loss at the toe and a filled loss at the heel. There are cracks around the front edges of the wrist. There are small losses around the sling plate. There are scattered nicks, scuffs and scratches. The LOP measures 13 3/8"" from the front of the trigger to the back of the buttplate. The plate has gone to a mustard patina with some scattered discoloration. Overall, the stock is in Good-plus condition as refinished Antique.

Type of Finish: Blue & Brass

Finish Originality: The iron parts have been refinished. Outside of the repairs, the brass finish appears Original. The buttplate is not original to the gun.

Bore Condition: The bore is dark. The rifling is worn, but visible. There is moderate-heavy erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 3 out of 10.

Overall Condition: This rifle retains about 25% of its metal finish, all in the receiver. There is a little blue finish between the magazine and barrel. There is some finish on the hammer. Most finish is on the receiver which has gone to a mustard patina. There are scattered nicks, dings, scuffs and scratches. Both of the receiver tangs have broken and been braze-repaired. There is a dent on the magazine at the slot which prevents the follower from being pushed all the way forward. There is a small raised spot on the bottom of the lifter, indicating that the lifter arm has worn the interior. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Fair-Good condition as repaired Antique (see Mechanics).

Mechanics: The magazine follower cannot be pushed all the way forward due to a dent in the magazine. The lever has notable play when the action is closed. The trigger return spring is missing or broken, the hammer will not catch the sear unless the trigger is pressed forward manually. The hammer does not have a half-cock safety. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Henry rifle was designed in 1860 and held 16 brass cartridges in its magazine. By 1866 it ceased production with about 14,000 having been manufactured. New Haven Arms then became Winchester Repeating Arms Company and the Henry evolved into the Model 1866. A few thousand Henry Rifles were purchased by the Union during the Civil War and many more were privately purchased by Union soldiers. The rifle quickly became known as the “rifle that you could load on Sunday and shoot all week long”. Because the Henry wasn’t purchased in large numbers by the Union, there were only a few Civil War battles where the Henry played a decisive role, one of which was the Battle of Franklin.

This rifle was made in 1864 and a previous owner has gone through some effort and expense to keep it going. The iron parts received a new blue finish somewhere in the distant past, both receiver tangs broke and were brazed back in place, the buttplate has been replaced with what is likely an earlier piece, and the stock has some repaired damage. Most, if not all of this work appears to have been done some time ago, so it may have been a working rifle for much of its life. Any Henry will make a great addition to a collection and we're sure this one will be no exception. Please see our photos and good luck!

Make: Winchester

Model: 1866

Serial Number: 38018

Year of Manufacture: 1870

Caliber: .44 Henry Rimfire

Action Type: Lever Action

Markings: The top of the barrel is marked "WINCHESTER'S REPEATING ARMS. NEW HAVEN. CT. / KING'S-IMPROVEMENT-PATENTED-MARCH 29. 1866. OCT. 16. 1860.". The lower tang is marked "38018" and "B" on the exterior, the left is marked "JF", "S" and "XX". The inside of the buttplate at the toe is marked "8018", also stamped on the upper tang inlet of the wrist. The receiver, sideplates, nosecap and buttplate have scroll engraving with punch-dot shading, bordering, and geometric panels on the sideplates and each side of the receiver.

Barrel Length: 24", Octagonal

Sights / Optics: The front sight is a Beach-style sight, folding to present either a white beaded post or a beaded post in a hood. The rear sight is a folding ladder-style sight presenting a "V"-notch marked "1" when down. When up, the ladder has "V"-notches at the top and bottom marked "900" and "2", respectively. There is a "V"-notched slider on the ladder graduated from "3" to "8". The slider is a little loose toward the bottom of the ladder, more tight toward the top. A folding peep sight is mounted to the receiver tang.

Stock Configuration & Condition: The stocks are two-piece XX walnut with brass-capped forend, straight grip, straight comb, brass crescent buttplate with storage compartment (cleaning rod in the compartment), sling plate with swivel mounted in the belly and a sling swivel mounted to the nosecap. The stocks have some scattered light nicks and scratches. There is a spot of more notable wear at the left-rear of the forend. There is a tiny crack at the left-front of the forend and a tiny loss at the bottom-rear edge of the forend. The wood is generally slightly shy to the metal, most notable at the top tang and the toe. The LOP measures 13 3/8" from the front of the trigger to the back of the buttplate. The plate has some scattered discoloration, mostly gone to a mustard patina. There is some light wear at the points of the heel and toe with a few scattered light nicks. Overall, the stocks are in Very Good condition as refinished Antique.

Type of Finish: Blue & Nickeled Brass

Finish Originality: Other examples in this range have exhibited factory engraving with the "JF" marking inside the tang. The presence of some nickel on the exterior with stronger nickel on the interior likely indicate original finish.

Bore Condition: The bore is gray with well defined rifling. There is some scattered light erosion and pitting. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains approximately 20% of its metal finish. The threads of the lever-screw are stripped. The corresponding threads on the sideplate show wear, but are in better condition than the screw. The barrel and magazine tube have gone to a fairly even light patina with a little blue in well protected areas or around raised features. There is some light surface oxidation and infrequent erosion. There is a little blue finish on the bolt and loading gate. The lever and hammer have some good color, minor muting. Most of the nickel plate on the exterior of the receiver and sideplates has worn away with infrequent nickel remaining. There is much stronger nickel on the interior of the sideplates and buttplate. There are some light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible with good detail in the engraving. Overall, this rifle rates in about Very Good condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: There is a four-piece cleaning rod stored in the buttstock.

Our Assessment: This is a Model 1866 with a 24" octagonal barrel made in 1870. The rifle has beautiful scroll engraving with panels on the sideplates and receiver. This rifle came along at a very interesting time for Winchester engraving, right at the dawn of the Ulrich era. Detailed Winchester records are not available for this serial number, but other examples in this range have been observed with factory engraving and the "JF" marking inside the tang. The style is similar to that of Conrad and John Ulrich with a little nickel plate remaining which indicate it is likely factory engraving and it sure looks good! All of the 1866 models are very collectable due to their age and the relatively short time period over which they were made. Please see our photos and good luck!

Make: Winchester

Model: 1866

Serial Number: 30989

Year of Manufacture: 1870

Caliber: .44 Henry, the rifle appears to have been converted for centerfire, but is missing its firing pin.

Action Type: Lever Action Rifle with Full Length Tubular Magazine

Barrel Length: 20”, Round

Sights / Optics: The front sight is a brass bead set in a slot on the front barrel band. The rear sight is a two-position folding sight presenting either a "V"-notch or an aperture with a "V"-notch marked "3" and a "V"notch at the top edge marked "5".

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb and steel carbine-style buttplate with a sliding door over a storage compartment (nothing in the compartment). The interior of the plate is marked "1448", indicating that it is a replacement. The door does not align properly with the storage compartment. The forend has a gap to the receiver. The band's mounting screw has been replaced with a pin. There is a crack in the bottom of the forend in front of the band and a smaller crack at the bottom-rear edge. There is a small loss at the heel to the left of the buttplate's tang. The fit of the wrist to the receiver tangs is imperfect. There is discoloration around the rear of the buttstock. There are some scattered light marks. The LOP measures 13 1/2" from the front of the trigger to the back of the buttplate. The plate has gone to a moderate patina with scattered wear and erosion. Overall, the stocks are in Good condition as refinished Antique.

Type of Finish: Blue & Brass

Finish Originality: Refinished, the sideplates are likely replacements. Some other parts may have been replaced.

Bore Condition: The bore is dark. The rifling is worn, but visible. There is moderate-heavy erosion and pitting in the bore. There is some built-up oxidation. There is a bulge in the bore about 7 1/2" from the muzzle. In this writer's opinion, the bore rates 3 out of 10.

Overall Condition: This rifle retains about 10% of its metal finish, all in the receiver. The steel's new finish has mostly worn or gone to a mottled patina. The steel has scattered surface erosion, most notable on the lever. The front edge of the magazine tube appears to be repaired. The sideplates have been polished and/or replaced, showing casting pores around some edges. The bottom tang has broken across the hole for the lever-lock and been brazed back in place, with braze built-up on the interior to reinforce it. The loading gate mounting screw has been replaced with either a peened pin or a screw that has been blended and no longer has a slot. There are scattered nicks, dings, scuffs and scratches. The action shows operational wear. The screw heads range from tool marked with strong slots to disfigured with usable slots. The markings range from clear to worn and incomplete. Overall, this rifle rates in about Good condition as custom/repaired Antique.

Mechanics: The firing pin is missing from the bolt. The magazine follower does not come flush with the lifter channel. Otherwise, the action functions properly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Model 1866 rifle was the first firearm to be built by the new Winchester Arms after they changed their name from the New Haven Arms Company in 1866. The Model 1866 was a much-improved version of the Henry rifle, with a loading port on the right side of the receiver featuring a spring-loaded cover, through which cartridges could be fed into a new solid magazine tube that was much stronger than the slotted tube used on the Henry. The loading gate precluded the need for an external follower, allowing for a walnut forend to be installed which prevented the user from burning their hands during extensive firing. The M1866 was made in rifle, carbine and musket versions and in four different models dependent on date of manufacture. All of the different models were chambered in .44 Henry Rimfire, with some of the later 4th Models chambered in .44 Henry Centerfire and some converted to Centerfire later.

This example is a carbine with a 20" barrel which looks like it has had a long and useful life. This would make a neat addition to a Winchester or early cartridge rifle collection, and will display well with its "been there, done that" appearance. It would also be a good candidate for a restoration. Please see our photos and good luck!

Make: Winchester Repeating Arms Co.

Model: 1866

Serial Number: 154927

Year of Manufacture: 1878

Caliber: .44 Henry Rimfire

Action Type: Lever Action

Barrel Length: 24", Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed to the rear of the barrel. The rear sight is an early-style "V"-notch buckhorn elevator sight dovetailed to the rear of the barrel.

Stock Configuration & Condition: The stocks are two-piece fancy checkered walnut with capped forend, straight grip, straight comb, and carbine-style buttplate with storage compartment (nothing in the compartment). The nosecap and buttplate are gold plated and engraved. The stocks have some scattered light nicks and small scratches. There is a compressed spot at the toe. There is a thin crack at the left-rear of the top tang. The checkering is well defined. The LOP measures 13 3/8" from the front of the trigger to the back of the buttplate. The plate has some scattered wear, most notable at the heel and toe. Overall, the stocks are in Fine-plus condition as Antique.

Type of Finish: Nickel & Gold

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and pitting. In this writer's opinion, the bore rates 6+ out of 10.

Overall Condition: This rifle retains approximately 40% of its metal finish. Strongest nickel finish is on the lever and hammer, the exposed portions of the barrel and magazine tube have mostly worn through the nickel (there is strong nickel under the forend). The receiver retains much of its gold finish with some wear around edges and on the bottom tang behind the lever. There are some scattered light nicks and small scratches. There is some light scuffing on the sides of the barrel toward the muzzle-end. There is infrequent minor erosion in the worn areas. The initials "SRS" have been hand-scribed above the deer scene on the left sideplate. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear with good detail in the engraving. Overall, this rifle rates in Very Good-Fine condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Winchester Factory Records letter and the results of a records survey by the Cody Firearms Museum. The letter indicates that this rifle was produced with a 24" octagonal barrel, fancy checkered stock, buckhorn sight, engraved with gold and nickel finish, received in warehouse February 20, 1878 and shipped January 11, 1879 on order 14329. The record entry has "Carbine" crossed out. The survey notes that of the surviving records, this is the only rifle of this specific configuration. There was one serial number, 145927, that was the same configuration except that "Carbine" was not struck out. The Cody Firearms Museum notes that it is possible this was a clerical error and both entries are for this rifle, it is also possible that they are two separate entries that have the same configuration apart from one being a Rifle and the other a Carbine.

Our Assessment: This is a gorgeous Model 1866 made in 1878. It is possibly the only one of its kind with factory engraving, fancy checkered stocks, buckhorn sight, and factory gold and nickel finish. The rifle has beautiful scroll engraving with a deer scene on the left sideplate. This rifle came along at a very interesting time for Winchester engraving, in the early part of the Ulrich era. It is very likely that one or more Ulrichs performed the engraving on this rifle. All of the 1866 models are very collectable due to their age and the relatively short time period over which they were made. This example, possibly unique, is certainly one of the most desirable and will take a prized place in even the most advanced collections. Please see our photos and good luck!

A Vintage 2-Piece box of .44 Colt ammunition, made expressly for the Winchester 1873 Rifles by Union Metallic Cartridge Company. The 2-piece rounded corner box shows some wear but is mostly readable. Not quite a full box, there are 45 correct rounds inside, most of which are in Very Good condition.

Make: Winchester

Model: 1873 Trapper Carbine

Serial Number: 382028

Year of Manufacture: 1891

"Firearms removed from the provisions of the National Firearms Act and classified as curios or relics"

"Winchester, Model 1873 carbine, cal. .32 WCF, S/N 382028, with 15-inch barrel."

https://www.atf.gov/file/128116/download

Caliber: .32-20 Winchester (.32 WCF)

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 15", Round

Sights / Optics: The front sight is a blade integral to a base at the front of the barrel. The rear sight is a folding "V"-notch sight dovetailed to the rear of the barrel. It appears to have previously had at least one more leaf, but it has broken off. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb and steel carbine-style buttplate. The initials "F.P" have been hand-carved into each side of the stock. The stocks have scattered nicks, scuffs and scratches. There is a crack at the bottom-front of the forend and a tiny loss at the top-rear corner of the forend on the right. There is some discoloration and general light handling wear. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has gone to a moderate-dark patina with scattered surface erosion. Overall, the stocks are in Very Good condition as Antique.

Type of Finish: Nickel

Finish Originality: Original

Bore Condition: The bore is dark. The rifling is worn, but mostly visible. There is erosion and pitting scattered through the bore. There is a bulge at the muzzle-end. In this writer's opinion, the bore rates 3+ out of 10.

Overall Condition: This rifle retains about 5% of its metal finish. Finish remains only in some well protected areas and around raised features. Other surfaces have mostly gone to a uniform patina. There are some scattered light nicks, scratches and surface erosion. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Good condition as Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included is a Winchester factory records letter and a copy of a July 28, 1994 dated letter from the BATF exempting this rifle by serial number from the provisions of the NFA and confirming its Antique status. The Winchester letter indicates that this carbine was produced as a .32 caliber, 15-inch barrel, nickel finish, received in warehouse April 24, 1891 and shipped May 16, 1891 with 23 other arms to order number 2798.

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West" for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed.

This example is a particularly special piece, a "Trapper" carbine. The standard Carbine had a 20" barrel, but they were available by special order with shorter barrels and this one is 15". These Trapper carbines are particularly scarce, with only a few hundred made. The .32 caliber chambering was only a small portion of those, and the factory nickel finish makes this a truly rare Winchester. The little rifles' significance would increase in 1934 when some very silly people known as "Congressmen" decided that a rifle could have a barrel that was too short. Thankfully, an even sillier group of people at the ATF have designated this particular rifle, by serial number, as exempt from the NFA, so it can be sold without doing too much silly paperwork.

The rifle shows its age, but most of these special-order carbines saw significant use. It will certainly be of interest to collectors and will make a wonderful addition to even the most advanced Winchester collections. Please see our photos and good luck!

Make: Winchester

Model: 1873

Serial Number: 1580

Year of Manufacture: 1874

Caliber: .44-40

Action Type: Lever Action with Full-Length Magazine & Single Set-Trigger (see Mechanics)

Barrel Length: 24", Octagonal

Sights / Optics: The front sight is a brass blade in a slotted base dovetailed to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate with a sliding door over a storage compartment (cleaning rod in the compartment). The door's detent spring is weakened or broken, the door is retained by the cleaning rod sections and will fall out if the plate is removed from the stock. The stocks have scattered nicks, scuffs and scratches with a few more notable dings. There are tiny losses at the right edge of the bottom tang. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with some scattered light oxidation. Some areas of the buttplate show a nickel-like appearance, typical of Winchester casehardening of this era and age. Overall, the stocks are in about Very Good condition as Antique

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is scattered light erosion and some minor pitting in the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 40% of its metal finish. The barrel has scattered wear with strongest finish on the bottom flats. Similarly, the bottom of the magazine shows wear while there is some good finish on the top. Worn areas have mostly gone to a light patina. The receiver has generally good finish with most notable wear toward the rear and in the top tang, showing some other scattered wear gone to a light patina. There are scattered nicks, scuffs and scratches. There is some surface erosion, mostly in the worn areas of the barrel. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition as Antique.

Mechanics: The trigger does not set properly. As noted above, the spring for the door in the buttplate is weakened or broken. Otherwise, the action functions correctly. We have not fired this rifle. As with all previously owned firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Winchester Factory Records letter indicating that it was produced as a Rifle with a 24" octagonal barrel and set trigger, received in warehouse July 22, 1874 and shipped July 28, 1874 with three other 1873s on order 1721. A four-piece cleaning rod is in the buttstock.

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West” for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as Winchester’s first metallic centerfire cartridge with a number of WCF cartridges to follow. Colt produced single action revolvers chambered for the Winchester cartridges as well, allowing users to have a rifle and handgun which shared the same ammunition.

This is a quite early example, serial 1580, made in July of 1874. The rifle appears to have had a gentle life, with wear consistent with limited and responsible use over the last 150 years. The rifle's early production and high condition will make it a wonderful addition to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1873 Rifle, 1st Model

Serial Number: 11512

Year of Manufacture: 1875

Caliber: .44-40 Winchester Center Fire (WCF)

Action Type: Lever Action with Full Length Tubular Magazine and Single Set-Trigger

Markings: The top of the barrel is marked “WINCHESTER’S- REPEATING ARMS. NEW HAVEN. CT. / KING’S-IMPROVEMENT-PATENTED-MARCH 29.1866. OCTOBER 16.1860.”. The lower tang is marked “11512”. The upper tang is marked “MODEL. 1873.”. The left of the bottom tang, the upper tang inlet of the wrist, and the inside of the buttplate at the toe each have the assembly number "2539". The lower tang is also marked "XXX". The inside of each sideplate is marked "512".

Barrel Length: 28" Octagonal

Sights / Optics: The front sight is a German silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped, and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece checkered XX deluxe walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate with sliding trapdoor in the rear face (nothing in the compartment). The stocks have some scattered light nicks, scuffs and scratches. There is a more notable scratch in the right of the forend at the front of the checkering. The checkering is generally well defined, the most notable handling wear is in the bottom of the forend. The wood is generally very well fit to the metal, it is slightly shy at some edges, consistent with shrinkage from age. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The buttplate has mostly muted, going to a nickel-like appearance, with some minor oxidation. Overall, the stocks are in Fine condition as Antique.

Type of Finish: Blue & Case Hardened

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore, mostly at the muzzle-end. In this writer's opinion, the bore rates 8 or 9 out of 10.

Overall Condition: This rifle retains about 75% of its metal finish. The finish is thinning at all edges. There is some scattered wear on the barrel and magazine tube, more notable on the magazine. The receiver has generally strong case color with muting in the handling areas. There are some light nicks, scuffs and scratches. There is infrequent minor surface oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Fine-Excellent condition as Antique.

Mechanics: The action functions correctly. The trigger can be set by pressing forward until it clicks. The top of the receiver is mortised for a 1st Model "thumbprint" dust cover. We have not fired this rifle. As with all previously owned firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: A Winchester factory records letter is included, indicating that serial number 11512 was received in warehouse November 15, 1875 and shipped March 21, 1876 on order 5643 as a rifle with a 28" octagonal barrel, set trigger, XX checkered stock and casehardened receiver.

Our Assessment: The famous Winchester Model 1873 lever action repeating rifle, known as "the gun that won the West", had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to move away from .44 rimfire and develop the powerful new .44-40 WCF round (Winchester’s first metallic centerfire cartridge), as well as a family of other new potent rounds, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The Model 1873 has an almost mythical status among firearms collectors, Old West enthusiasts, and fans of the Western film genre.

This example is a wonderful find for collectors due to its special-order features and condition. The rifle was ordered with a 28" barrel, a single set trigger, checkered stocks, and a case hardened receiver. Not content with these documented features, the rifle is drop-dead gorgeous, retaining 75% original finish, great mechanics, and a better bore than any 150 year old rifle has a right to. This is going to make a great addition to even an advanced collection. Please see our photos and good luck!

Make: Winchester

Model: 1873

Serial Number: 235903

Year of Manufacture: 1888

Caliber: .38-40 WCF

Action Type: Lever Action Rifle with Full Length Tubular Magazine

Barrel Length: 24”, Round

Sights / Optics: No front sight is present. The original dovetail is now a flat at the muzzle. Another dovetail has been crudely cut behind this. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate with a sliding door over a storage compartment (nothing in the compartment). The forend has a loss at the top-front corner on the right and a crack at the left-front edge. The finish has scattered wear, crazing, bubbling and pooling. There are scattered nicks, dings, scuffs and scratches. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has scattered wear and erosion under its new finish. Overall, the stocks are in Good condition as refinished Antique.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is dark gray. The rifling is worn, but visible. There is scattered light-moderate erosion and pitting in the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 5% of its metal finish. Finish remains mostly in well protected areas and around raised features. There is a band of finish on the magazine tube where the bracket originally protected it. The bracket has been secured to the tube with a nail in place of the original pin. Other surfaces have worn to white or gone to a light patina. There is some scattered erosion. There are scattered nicks, dings, scuffs and scratches. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible. Overall, this rifle rates in Good condition as custom Antique.

Mechanics: The action functions properly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West” for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as Winchester’s first metallic centerfire cartridge with a number of WCF cartridges to follow including the .38-40. Colt produced single action revolvers chambered for the Winchester cartridges as well, allowing users to have a rifle and handgun which shared the same ammunition. The 1873 has a mythic status among both firearms enthusiasts and fans of the Old West in general, even inspiring the 1950 movie "Winchester '73" starring Jimmy Stewart.

The .38-40 Win. cartridge, also known as the .38 WCF, was introduced by Winchester in 1874 as the second chambering for this model. It is a necked-down .44-40 cartridge, giving it a little higher velocity and not requiring as much lead for the projectile.

This Model 1873 Rifle was made in 1888 and looks like it’s had a long and useful life. The barrel has been shortened by about 3/4" with a new front sight dovetail cut (somewhat roughly), the magazine was shortened as well, and the stocks have been refinished. The gun otherwise shows wear consistent with its age of nearly 140 years. It will display well as-is with its "been there, done that" appearance and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1873

Serial Number: 219367

Year of Manufacture: 1886

Caliber: .44-40 WCF

Action Type: Lever Action Rifle with Full Length Tubular Magazine

Barrel Length: 24”, Octagonal

Sights / Optics: The front sight is a steel blade in a slotted base dovetailed to the front of the barrel. The rear sight is a "V"-notch elevator sight screwed to a base dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate with a sliding door over a storage compartment (nothing in the compartment). The stocks have scattered nicks, dings, scuffs and scratches. There is dark discoloration around the edges where the wood meets metal. There are some thin grain-line cracks around the edges. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered light surface oxidation. Overall, the stocks are in about Very Good condition as refinished Antique.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is dark gray. The rifling is generally well defined. There is scattered light-moderate erosion and pitting in the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 3% of its metal finish. There is infrequent remaining finish in well protected areas. Most surfaces have worn to white or gone to a light patina. There are scattered nicks, scuffs and scratches with tool marks around the edges of the sideplates. There are tool marks at some screw heads. There is scattered surface oxidation and erosion. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible. Overall, this rifle rates in about Good condition as Antique (see Mechanics).

Mechanics: The hammer will fall from half-cock when the trigger is pressed. Otherwise, the action functions properly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West” for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as Winchester’s first metallic centerfire cartridge with a number of WCF cartridges to follow including the .38-40. Colt produced single action revolvers chambered for the Winchester cartridges as well, allowing users to have a rifle and handgun which shared the same ammunition. The 1873 has a mythic status among both firearms enthusiasts and fans of the Old West in general, even inspiring the 1950 movie "Winchester '73" starring Jimmy Stewart.

The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as the original chambering for this model. It was very popular in its day and still has a devoted following today among fans of the American West as well as Cowboy Action Shooting competitors. It was also necked-down to form the .38-40 cartridge, giving it a little higher velocity and not requiring as much lead for the projectile.

This Model 1873 Rifle was made in 1886 and looks like it served for generations. It will display well as-is with its "been there, done that" appearance and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1873 Rifle

Serial Number: 197474B

Year of Manufacture: 1886

Caliber: .32-20 Winchester Center Fire

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 24", Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a peep sight (none included).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There are some minor losses at edges and corners. There are a few thin cracks at edges. The wood shows signs of light sanding. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has scattered wear and erosion. Overall, the stocks are in Very Good condition as refinished Antique.

Type of Finish: No finish remains.

Finish Originality: Most surfaces show signs of polishing or aggressive cleaning, but we see no sign of a new finish being applied to the metal.

Bore Condition: The bore is dark. The rifling is worn, but visible. There is scattered erosion and pitting in the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 0% of its metal finish. Most surfaces show signs of polishing or aggressive cleaning. There are areas going to a light patina. There is scattered surface erosion. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with questionably usable slots. The markings range from clear to worn and incomplete. Overall, this rifle is in Good condition as Antique.

Mechanics: The hammer can be dropped from the half-cock position by pulling the trigger. Otherwise, the action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West" for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. This example is a Rifle chambered for .32-20 WCF with a 24" octagonal barrel. The rifle looks like it has had a long and useful life, having had the stocks refinished and retaining decent mechanics. This will display well with its "been there, done that" appearance and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1873

Serial Number: 141188A

Year of Manufacture: 1884

Caliber: .38-40 WCF

Action Type: Lever Action, Single Set-Trigger

Barrel Length: 32", Octagonal

Sights / Optics: The front sight is a german-silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a semi-buckhorn "V"-notch elevator sight dovetailed to the rear of the barrel. The top tang has a folding aperture sight installed.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate with storage compartment (cleaning rod in the compartment). Decorative metal inlays have been applied to the stocks, a few are missing. The stocks have some scattered nicks, scuffs and scratches. There is dark discoloration along the comb. The wood-metal fit is good and there is finish where the inlays are missing, appearing to have been pressed and tacked into the wood over the original finish. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has gone to a fairly uniform patina with some surface oxidation, nicks and scratches. Overall, the stocks are in Very Good condition as customized Antique.

Type of Finish: Blue & Case Color

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is some scattered light erosion and infrequent pitting. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains approximately 40% of its metal finish. The finish is thinning at all edges. The magazine tube is mostly worn to white or gone to a light patina. The barrel has a surprising amount of remaining finish with some scattered minor oxidation. The receiver's case color has mostly muted or gone to a light patina with some good color in protected areas and around raised features. There are some scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings range from clear to worn, but legible. Overall, this rifle rates in Very Good-plus condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Winchester factory records letter indicating it was ordered in 38 caliber with a 32" octagon barrel, set trigger, casehardened receiver, received in warehouse and shipped March 25, 1884. There is a five-piece cleaning rod stored in the buttstock.

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West” for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as Winchester’s first metallic centerfire cartridge with a number of WCF cartridges to follow.

This is an 1884 vintage rifle chambered for the .38 WCF cartridge. This was based on the earlier .44 WCF, but necked down to about .40 caliber, using slightly lighter bullets at slightly higher velocity. The rifle was special ordered with a 32" barrel, set-trigger and casehardened receiver. Standard rifles had only a 24" barrel, so this longer barrel, combined with a set trigger, would have provided significant improvement in precision. With a factory records letter confirming its original configuration, this will make a great addition to a Winchester collection. Please see our photos and good luck!

Make: Winchester

Model: Custom 1873 Rifle

Serial Number: 116526A

Year of Manufacture: 1884, we do not know when the rifle was converted to its current configuration.

Caliber: Converted to .22 Long Rifle

Action Type: Lever Action with Half-Length Tubular Magazine

Barrel Length: 22", Half-Round, Half-Octagonal

Sights / Optics: The front sight is a white blade in a slotted base dovetailed to the front of the barrel. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped, and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece select walnut with capped forend, straight grip, straight comb and steel crescent buttplate with sliding door (there is no compartment under the door). The stocks have a few scattered light marks. The buttstock is well fit to the metal, the forend has slight gaps at the front and rear. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has some minor erosion and light nicks under the finish with a few marks and spots of oxidation through the finish. Overall, the stocks are in Very Good-Fine condition as not original to the gun.

Type of Finish: Blue

Finish Originality: Refinished. The engraving is cut through the finish. The barrel, bolt, lifter and magazine assembly are not original to the receiver. Some other parts may be replaced.

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore, mostly at the muzzle-end. In this writer's opinion, the bore rates 9 out of 10.

Overall Condition: This rifle retains about 92% of its current metal finish. The finish is generally strong. The engraving is cut through the finish. There are a few spots of touch-up on the barrel. There is some minor erosion under the finish. There are some light nicks and scratches. There is infrequent minor surface oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Good condition as customized Antique (see Mechanics).

Mechanics: During a function check, snap-caps tend to stick in the magazine tube and inconsistently fed onto the lifter properly. The timing between the bolt and lifter is not quite perfect. The extractor will occasionally slip off of a rim. We have not fired this rifle. As with all previously owned firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The famous Winchester Model 1873 lever action repeating rifle, known as "the gun that won the West", had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to move away from .44 rimfire and develop the powerful new .44-40 WCF round (Winchester’s first metallic centerfire cartridge), as well as a family of other new potent rounds, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The Model 1873 has an almost mythical status among firearms collectors, Old West enthusiasts, and fans of the Western film genre.

This example has seen some rather radical customization resulting in an attractive and unique rifle. Its 22" half-octagon barrel has been sleeved for use with .22 Long Rifle cartridges. The bolt, lifter and magazine assembly have also been replaced for use of this cartridge. The gun has been refinished with attractive after-market engraving cut through the finish. Finally, the stocks have been replaced with a beautiful set of deluxe walnut. The rifle needs a little work before it will function properly, but it sure looks pretty as-is. Please see our photos and good luck!

Make: Winchester

Model: 1873

Serial Number: 102027

Year of Manufacture: 1882

Caliber: .44-40 WCF

Action Type: Lever Action Rifle with Full Length Tubular Magazine

Barrel Length: 24”, Round

Sights / Optics: The front sight is a brass blade in a slotted base dovetailed to the front of the barrel, the sight appears to be installed backward. The rear sight is a "U"-notch sight screwed to a block in the dovetail at the rear of the barrel, screw-adjustable for elevation. The sights are not original to the rifle. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb and steel carbine-style buttplate. The forend has gaps to the metal at the front and rear, more notable at the front. There are two notable dings in the belly. There are a few other light marks. There are no chips or cracks. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has scattered wear and erosion, most notable at the heel, showing treatment with cold blue. Overall, the stocks are in about Very Good condition as not original to the gun.

Type of Finish: Blue

Finish Originality: Refinished. The barrel is not original to the receiver. Some other parts may have been replaced.

Bore Condition: The bore is gray. The rifling is well defined. There is scattered light-moderate erosion and pitting in the bore. In this writer's opinion, the bore rates 4 or 5 out of 10.

Overall Condition: This rifle retains about 15% of its current metal finish. Remaining finish is scattered with most surfaces gone to a light patina. The muzzle has been crowned and the barrel does not appear to be threaded all the way into the receiver (the markings are timed properly). The bottom tang has broken off and been soldered back in place. The top tang is bent. There is some scattered erosion under the new finish. The bottom of the lifter has been polished. There are some light nicks, scuffs and scratches. There are tool marks at some screw heads. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible. Overall, this rifle rates in Fair-Good condition as custom Antique (see Mechanics).

Mechanics: The action functions properly, but will likely be found to have excessive headspace. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West” for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as Winchester’s first metallic centerfire cartridge with a number of WCF cartridges to follow including the .38-40. Colt produced single action revolvers chambered for the Winchester cartridges as well, allowing users to have a rifle and handgun which shared the same ammunition. The 1873 has a mythic status among both firearms enthusiasts and fans of the Old West in general, even inspiring the 1950 movie "Winchester '73" starring Jimmy Stewart.

The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as the original chambering for this model. It was very popular in its day and still has a devoted following today among fans of the American West as well as Cowboy Action Shooting competitors. It was also necked-down to form the .38-40 cartridge, giving it a little higher velocity and not requiring as much lead for the projectile.

This Model 1873 Rifle was made in 1882 and looks like it was someone's favorite. The barrel, sights and stocks have been replaced, the bottom tang has broken off and been soldered back in place. Someone went to some effort to keep this rifle going. It will display well as-is with its "been there, done that" appearance and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1873 Saddle Ring Carbine

Serial Number: 6616

Year of Manufacture: 1875

Caliber: .44-40

Action Type: Lever Action

Barrel Length: 20""

Sights / Optics: The front sight is a blade integral to the front barrel band. The rear sight is a two-position folding leaf presenting either a ""V""-notch marked ""1"" or a taller leaf with a ""V""-notch aperture marked ""3"" and a ""V""-notch at the top marked ""5"".

Stock Configuration & Condition: The stocks are XX walnut with banded forend, straight grip, straight comb and steel carbine-style buttplate with a sliding door. The stock and forend have each been stamped ""16"". The left of the buttstock has a metal inlay with the Prince of Wales feathers surrounded by the motto of the Order of the Garter, flanked by initials ""A"" and ""E"" (Albert Edward) over a symbol of the Order of the Star of India. The stocks have scattered nicks, dings, scuffs and scratches. There is wear in front of the forend consistent with removal and installation of the barrel band (also marked ""16""). The LOP measures 12 7/8"" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white or gone to a patina with scattered marks and infrequent surface oxidation. Overall, the stocks are in Very Good condition.

Type of Finish: Blue & Casehardened

Finish Originality: Original, some markings were applied by the London Armoury, some may have been applied after being gifted.

Bore Condition: The bore is semi-bright with sharp rifling. There is some light erosion and minor pitting in the bore. There is a patch of more notable pitting in the top of the bore toward the muzzle-end. In this writer's opinion, the bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 35% of its metal finish. The barrel has scattered wear, mostly on the top between the bands. Other areas show some blue and some patina. The magazine has a similar mix of blue and patina. Much of the exposed portion of the receiver has a nickel-like appearance, typical of Winchester casehardening of this era and age, other areas have muted or gone to patina. There are scattered nicks, scuffs and scratches. There is some surface erosion, mostly in the worn areas of the barrel. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, this rifle is in Very Good condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with two Winchester Factory Records letters and printouts from R.L. Wilson's book ""Winchester"" noting other examples. A three-piece cleaning rod is in the buttstock.

Our Assessment: The famous Winchester Model 1873 is known as ""the gun that won the West"". When it was introduced, it was one of the most advanced repeating cartridge arms of its time and was well respected around the world. In 1875, the Prince of Wales, Albert Edward (later King Edward VII) purchased 15 rifles and 15 carbines, shipped to the London Armoury of James Kerr & Co. These Winchesters were to come with him on his tour of India to be given as gifts. The rifle's barrel inscription reads ""FROM H.R.H. THE PRINCE OF WALES K.G. G.C.S.I. INDIA 1875-76"". Winchester factory records indicate that this carbine shipped on the same order as three other 1873s currently on display in the gun room at Sandringham in England. Interestingly, of the six 1873s at Sandringham, only one is a carbine.

A diary of Edward's visit to India by The Times reporter William Howard Russell only notes one instance of rifles being gifted. While it is entirely possible this carbine was gifted on some other instance, Russell detailed that rifles were given to Sir Jung, the Prime Minister of Hyderabad and his family. It is not impossible that this carbine was gifted to Sir Jung or a member of his family (https://ia601307.us.archive.org/23/items/princeofwalestou01russ/princeofwalestou01russ.pdf).

At some point, this carbine's stock was swapped with a rifle stock from the same order. That rifle found its way to Berman Museum in Alabama. Both would later be reunited by Brent Wilburn of Antique Arms Inc. in 2012 (https://www.antiquearmsinc.com/rare-winchester-1873-src-prince-of-wales.htm). This 1873 carbine is a globetrotter that just oozes history and will make a fine addition to even the most advanced collections.

Make: Winchester

Model: 1873

Serial Number: 3822

Year of Manufacture: 1875

Caliber: .44-40

Action Type: Lever Action with Full-Length Magazine

Barrel Length: 24"", Round

Sights / Optics: The front sight is a berman silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a ""V""-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate with a sliding door over a storage compartment (nothing in the compartment). The stocks have sme scattered light nicks, scuffs and scratches. The LOP measures 12 7/8"" from the front of the trigger to the back of the buttplate. The plate has generally strong case color, slightly muted with spots of minor oxidation. Overall, the stocks are in Fine condition as Antique

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is some light erosion in the bore. In this writer's opinion, the bore rates about 8 out of 10.

Overall Condition: This rifle retains about 75% of its metal finish. The finish is thinning at all edges. The finish is generally strong. The most notable wear is along the right of the barrel over the forend and patches of wear on the top and right of the barrel around notable surface erosion. There is some other scattered mminor wear. There is some faint surface oxidation. There are scattered light nicks, scuffs and scratches. There are tool marks around some screw heads. The lever and hammer have generally good case color, slightly muted. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear, the British proof marks are struck through the finish. Overall, this rifle is in Fine condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Winchester Factory Records letter indicating that it was produced as a Rifle with a round barrel, received in warehouse April 26, 1875 and shipped April 27, on order 3123.

Our Assessment: One of the most successful, and certainly one of the most famous Winchester rifles was the Winchester Model 1873, known as “The Gun that Won the West” for its predominant role in the hands of Western settlers. The Model 1873 had a steel frame that was much stronger than the brass framed Model 1866, allowing Winchester to develop a family of powerful new cartridges, with Colt usually producing Single Action Army revolvers in the same calibers shortly after they were developed. The .44-40 Win. cartridge, also known as the .44 WCF, was introduced by Winchester in 1873 as Winchester’s first metallic centerfire cartridge with a number of WCF cartridges to follow. Colt produced single action revolvers chambered for the Winchester cartridges as well, allowing users to have a rifle and handgun which shared the same ammunition.

This is an early example, serial 3822, made in April of 1875. The rifle appears to have had a gentle life, retaining the great majority of its original finish, strong mechanics, and a better bore than its age of 150 years would suggest. It has British proof marks indicating that it likely went to England sometime early in its life, perhaps that was where it was originally shipped from Winchester. The rifle's early production and high condition will make it a wonderful addition to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1876 Rifle

Serial Number: 59792

Year of Manufacture: 1886

Caliber: .40-60 Winchester Center Fire

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 28", Octagonal

Sights / Optics: The front sight is a steel blade in a slotted base dovetailed to the front of the barrel. The rear sight is a folding ladder-style sight which presents a "V"-noch while folded down. When folded up, there is a "V"-notched slider on the ladder which is graduated from 2-10. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth wood with a straight grip, steel nosecap and steel crescent buttplate with sliding door storage compartment (there is nothing in the compartment). The stocks have some light marks with a couple of small losses to each side of the top tang. There is scattered pooled finish, more in the buttstock than the forend. The wood is generally proud to the metal, slightly shy at the toe. The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate has scattered wear and minor surface erosion, appearing to have been treated with cold blue in the distant past. There is some stubborn adhesive residue on the buttplate. The stocks are in Very Good overall condition as not original to the gun.

Type of Finish: Blued

Finish Originality: Some remaining finish is Original, most surfaces show treatment with cold blue.

Bore Condition: The bore is gray. The rifling is worn, but visible. There is light erosion and pitting scattered through the bore. In this writer's opinion, this bore rates a 6 out of 10.

Overall Condition: This rifle retains about 10% of its metal finish. Finish remains in some protected areas or around raised features. Most exposed surfaces have a mottled appearance, showing old, worn bold blue or areas going to a light patina. There are some scattered nicks, scuffs and scratches. There is infrequent surface erosion. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn, but legible. Overall, this rifle is in Very Good condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1876 was a heavier-framed rifle than the Model 1873, and was the first to be chambered for full-powered centerfire rifle cartridges, as opposed to rimfire cartridges or handgun-sized centerfire rounds. While similar in design to the 1873, the 1876 was actually based on the prototype 1868 lever-action rifle that was never commercially produced by Winchester. It was introduced to celebrate the American Centennial, and earned a reputation as a durable and powerful hunting rifle that was also used by the Canadian North-West Mounted Police and the Texas Rangers. Theodore Roosevelt used one on his early hunting expeditions in the West and one was found in the possession of Apache warrior Geronimo after his surrender in 1882. Unfortunately, the 1876 lost popularity when the Model 1886 was introduced in heavier calibers.

This rifle's 28" barrel is chambered in .40-60 Winchester Center Fire, a cartridge designed for the short action Model 1876 rifle. It has a shorter, fatter case intended to improve performance over the .45-70 Govt with a lighter bullet traveling notably faster. This Model 1876 rifle is in Very Good condition as Antique. The bore has some erosion and pitting, but the rifle retains some of its original blued finish and strong mechanics. The 1876 Winchester was only made for 21 years, with a total of about 63,871 made in rifle, carbine and musket formats, with the result that ALL are collectable. This would be a great rifle to add to a collection, placed between an 1873 and an 1886. Please see our photos and good luck!

Make: Winchester

Model: 1876 Rifle

Serial Number: 29845

Year of Manufacture: 1882

Caliber: .45-75 Winchester Center Fire

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a steel blade in a slotted base dovetailed to the front of the barrel. The rear sight is a folding ladder-style sight which presents a "V"-notch when folded down. When folded up, the ladder has a "V"-notched slider and the arm of the ladder is graduated from 2-10 in hundreds of yards. The slider is loose on the ladder arm. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a straight grip, steel nosecap and steel crescent buttplate with sliding door storage compartment (there is nothing in the compartment). The forend has a long loss along the top-right edge that has been filled. There are long cracks on the bottom of the forend, one starting at the front edge, one at the rear, and neither reaching the opposite edge. There are a couple of other more minor cracks. There are scattered nicks, scuffs and scratches. The LOP measures 12 7/8” from the front of the trigger to the back of the buttplate. The buttplate has gone to a patina with scattered erosion. The stocks are in Good-plus overall condition as refinished and repaired Antique.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, this bore rates 4 out of 10.

Overall Condition: This rifle retains about 3% of its metal finish. Finish remains mostly in one patch on the bottom of the magazine tube in front of the forend. Other surfaces have mostly worn to white or gone to a light patina. There is scattered surface erosion. There are scattered nicks, scrapes and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Good-plus condition as Antique (see Mechanics).

Mechanics: The lever safety does not properly prevent pulling the trigger. Otherwise, the action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1876 was a heavier-framed rifle than the Model 1873, and was the first to be chambered for full-powered centerfire rifle cartridges, as opposed to rimfire cartridges or handgun-sized centerfire rounds. While similar in design to the 1873, the 1876 was actually based on the prototype 1868 lever-action rifle that was never commercially produced by Winchester. It was introduced to celebrate the American Centennial, and earned a reputation as a durable and powerful hunting rifle that was also used by the Canadian North-West Mounted Police and the Texas Rangers. Theodore Roosevelt used one on his early hunting expeditions in the West and one was found in the possession of Apache warrior Geronimo after his surrender in 1882. Unfortunately, the 1876 lost popularity when the Model 1886 was introduced in heavier calibers.

This rifle's 26" barrel is chambered in .45-75 Winchester Center Fire, a cartridge designed for the short action Model 1876 rifle. It has a shorter, fatter case intended to give the performance of the .45-70 Govt in the shorter action. This is a Model 1876 rifle that is in Good condition as Antique. The rifle shows its age, but retains decent mechanics. The 1876 Winchester was only made for 21 years, with a total of about 63,871 made in rifle, carbine and musket formats, with the result that ALL are collectable. This would be a great rifle to add to a collection, placed between an 1873 and an 1886. Please see our photos and good luck!

Make: Winchester

Model: 1876 Rifle

Serial Number: 24878

Year of Manufacture: 1882

Caliber: .45-60 Winchester Center Fire

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 28", Octagonal

Sights / Optics: The front sight is a brass blade in a slotted base dovetailed to the front of the barrel; the sides of the base are peened and the blade is not original. The rear sight is a folding ladder-style sight, presenting a "V"-notch when folded down and with a "V"-notched slider on the ladder. The ladder is marked with graduations from 2-10. The slider is fairly snug on the bottom of the ladder, more loose at the top. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate with a sliding door over a storage compartment (there is nothing in the compartment). The stocks have scattered nicks, dings, scuffs and scratches. There is a repaired crack at the toe on the right, some have damaged or removed portions of the surface wood. There is a gouge on the left of the comb. There are some thin grain-line cracks around the edges. The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate has scattered erosion and pitting. The stocks are in Good-plus overall condition as Antique.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is dark. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 20% of its metal finish. Finish remains mostly in protected areas, such as the bottom of the barrel and top of the magazine, or around raised features such as the sights and sideplates. There is infrequent other scattered finish. Most exposed surfaces have gone to a patina. There is some scattered surface erosion. There are scattered nicks and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with a usable slot. The markings are clear. Overall, this rifle is in Very Good condition as Antique.

Mechanics: The action functions correctly. The dust cover slides on a rail which is screw-secured to the receiver. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1876 was a heavier-framed rifle than the Model 1873, and was the first to be chambered for full-powered centerfire rifle cartridges, as opposed to rimfire cartridges or handgun-sized centerfire rounds. While similar in design to the 1873, the 1876 was actually based on the prototype 1868 lever-action rifle that was never commercially produced by Winchester. It was introduced to celebrate the American Centennial, and earned a reputation as a durable and powerful hunting rifle that was also used by the Canadian North-West Mounted Police and the Texas Rangers. Theodore Roosevelt used one on his early hunting expeditions in the West and one was found in the possession of Apache warrior Geronimo after his surrender in 1882. Unfortunately, the 1876 lost popularity when the Model 1886 was introduced in heavier calibers.

This is an example from 1882, chambered for the .45-60 Winchester cartridge. It's in good shape for its age, retaining 20% original metal finish with scattered wear in the stocks. The mechanics are still strong. The 1876 Winchester was only made for 21 years, with a total of about 63,871 made in rifle, carbine and musket formats, with the result that ALL are collectable. This example would be a great rifle to add to a Winchester collection, placed between an 1873 and an 1886. Please see our photos and good luck!

Make: Winchester

Model: 1876 Rifle

Serial Number: 12597

Year of Manufacture: 1880

Caliber: .45-60 Winchester Center Fire

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 28", Round

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a folding ladder-style sight, presenting a "V"-notch when folded down and with a "V"-notched slider on the ladder. The ladder is marked with graduations from 2-10. The slider is a little bit loose on the ladder, the ladder has light play when folded down. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate with a sliding door over a storage compartment (there is nothing in the compartment). The forend has been decorated with brass tacks along the sides and bottom-rear. The stocks have scattered nicks, scuffs and scratches. There are no chips or cracks. The LOP measures 13” from the front of the trigger to the back of the buttplate. The buttplate has gone to a light patina with some scattered light surface erosion. The stocks are in Very Good overall condition as custom-decorated Antique.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is dark. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 3% of its metal finish. Finish remains mostly in the bottom tang where protected by the lever, with a little in some well protected areas. Exposed surfaces have gone to a light patina. There is some scattered surface erosion. There are scattered nicks and scratches. The action shows operational wear. There are tool marks around some screw heads, most notable around the sideplate screw. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in Very Good condition as Antique.

Mechanics: The lever has some play in the closed position. Otherwise, the action functions correctly. The dust cover slides on a rail which is screw-secured to the receiver. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1876 was a heavier-framed rifle than the Model 1873, and was the first to be chambered for full-powered centerfire rifle cartridges, as opposed to rimfire cartridges or handgun-sized centerfire rounds. While similar in design to the 1873, the 1876 was actually based on the prototype 1868 lever-action rifle that was never commercially produced by Winchester. It was introduced to celebrate the American Centennial, and earned a reputation as a durable and powerful hunting rifle that was also used by the Canadian North-West Mounted Police and the Texas Rangers. Theodore Roosevelt used one on his early hunting expeditions in the West and one was found in the possession of Apache warrior Geronimo after his surrender in 1880. Unfortunately, the 1876 lost popularity when the Model 1886 was introduced in heavier calibers.

This is an example from 1880, chambered for the .45-60 Winchester cartridge. It's in decent shape for its age, retaining a little bit of original metal finish. The stocks have scattered light wear and the forend has been decorated with brass tacks. The mechanics are good. The 1876 Winchester was only made for 21 years, with a total of about 63,871 made in rifle, carbine and musket formats, with the result that ALL are collectable. This example would be a great rifle to add to a Winchester collection, placed between an 1873 and an 1886. Please see our photos and good luck!

Make: Winchester

Model: 1885 High Wall

Serial#: 67165

Year of Manufacture: 1893–1894 (Antique)

Caliber: .40-65 Winchester

Action Type: Single-Shot, Falling Block Rifle (with Single Set Trigger)

Markings: The barrel is marked "MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A." and “40-65 W.C.F.” clearly visible. The serial number "67165" is marked distinctly on the lower tang. Standard Winchester proofs are visible.

Barrel Length: 30” Octagon-to-Round, #3 Barrel Weight

Sights / Optics: The front sight is a "Rocky Mountain" german-silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The rifle features a walnut straight-grip stock and matching forend with a traditional crescent buttplate. The wood exhibits minor handling marks, scattered small scuffs, and expected wear consistent with age and use. Small crack in the forearm near the screw escutcheon, the are no other cracks or significant damage noted. Overall, the stocks remain in Very Good to Fine antique condition.

Type of Finish: Blued Receiver, Barrel, and Components

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is minor scattered erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: The rifle retains approximately 80% original blue finish overall, with the barrel showing strong, deep bluing and some thinning along edges, muzzle, and at the transition from octagon to round. The receiver exhibits modest finish loss on high-contact areas with normal handling marks. Screwheads are sharp, showing minimal tool marks. All markings remain crisp and clear. Overall, this rifle is in Very Good to Fine antique condition.

Mechanics: The action functions smoothly and locks securely. The single set trigger engages crisply and functions properly. As with all antique firearms, thorough cleaning and inspection are advised prior to firing.

Box, Paperwork & Accessories: None.

Our Assessment:

The Winchester Model 1885, originally designed by John Moses Browning, represents the pinnacle of single-shot rifle design and craftsmanship of the late 19th century. This example, chambered in .40-65 Winchester—a classic American cartridge prized by both hunters and long-range target shooters of the period—is particularly attractive with its desirable features, including a special-order 30” octagon-to-round barrel in the heavier #3 barrel weight configuration, crescent buttplate, and factory single set trigger.

Manufactured between 1893 and 1894, this antique Winchester High Wall retains an impressive original finish, clear markings, and excellent mechanical function. The single set trigger enhances accuracy and adds to the desirability of the rifle, especially for collectors who appreciate authentic 19th-century firearms capable of precise shooting. The octagon-to-round barrel provides a unique balance, improving both aesthetics and handling characteristics.

This rifle would make an exceptional addition to any collection of classic Winchester firearms or for an enthusiast looking to experience shooting with historical authenticity. Its combination of original condition, antique status, desirable caliber, and rare features ensures its continued appeal to serious collectors and Winchester aficionados alike.

Make: Winchester

Model: 1885 High Wall

Serial#: 65418

Year of Manufacture: 1893 (Antique)

Caliber: .40-65 WCF

Action Type: Single-Shot Falling Block Rifle

Markings: The top of the barrel is marked ""MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN CONN. U.S.A."" The top of the chamber is marked ""40-65 WCF"". The lower tang is marked with the serial number ""65418"". The bottom barrel flat is marked ""3"" in front of the ebony schnabel inlay on the forearm.

Barrel Length: 28” Octagon

Sights / Optics: The rifle is equipped with a dovetailed blade front sight and a dovetailed semi-buckhorn rear sight.

Stock Configuration & Condition: The stocks are walnut with an ebony schnabel insert on the forend, straight wrist, and crescent metal buttplate in the white. A 2.5"" hairline crack is present on the left side of the tang area. Bronze Indian Head pennies, dated 1893, have been tastefully inlaid on each side of the wrist. The wood exhibits general handling wear, dings, and scratches consistent with age and regular use. Overall, the stocks rate in Good condition as Antique.

Type of Finish: Blued (Faded to Brown Patina), Buttplate in the white

Finish Originality: Refinished long ago

Bore Condition: The bore is grey with worn rifling and scattered corrosion throughout. In this writer’s opinion, the bore rates 6/10.

Overall Condition: This rifle retains approximately 30% of an older refinished blued finish, which has turned into a pleasing brown patina with soft edges and finish loss on leading surfaces. The barrel markings are thinning but remain legible. The rifle displays honest wear from years of handling and use. One tang screw has been replaced. Screwheads show moderate use. Overall, this rifle rates in Good condition as Antique.

Mechanics: The action functions correctly. We did not fire this rifle. As with all antique firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None

Our Assessment: The Winchester Model 1885, designed by John Moses Browning, is a renowned single-shot rifle beloved for its robust construction and remarkable accuracy. This High Wall rifle, chambered in the classic .40-65 WCF cartridge, was manufactured in 1893 and carries significant charm and character. Notably enhanced with authentic bronze Indian Head pennies from the rifle’s birth year carefully inlaid into the wrist, this firearm possesses unique historical character that sets it apart. Though the rifle exhibits wear consistent with extensive use—including an older refinish, softened edges, and a bore showing honest wear—it remains a solid example of Winchester’s craftsmanship and design.

Whether displayed as a conversation piece or carefully restored for vintage shooting, this 1885 High Wall will appeal strongly to Winchester collectors and admirers of antique American firearms alike.

Make: Winchester

Model: 1885 High Wall

Serial#: 81264

Year of Manufacture: 1898 (Antique)

Caliber: .38-55 Winchester

Action Type: Single-Shot, Falling Block Rifle

Markings: The barrel is marked "MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A." and "38-55" caliber designation. The serial number "81264" is clearly marked on the lower tang.

Barrel Length: 30” Octagon, #3 Barrel Weight

Sights / Optics: Standard Winchester sights, including a dovetailed blade front sight and semi-buckhorn rear sight adjustable for elevation.

Stock Configuration & Condition: The stocks are walnut with a straight grip buttstock and matching forend. The buttstock features a crescent steel buttplate. Wood surfaces display minor handling marks, light scratches, and typical wear consistent with age and careful use. No cracks or significant damage noted. Overall, the stocks remain in Very Good to Fine antique condition.

Type of Finish: Blued Barrel; Case-Colored Receiver (now mostly silvered)

Finish Originality: Original

Bore Condition: The bore is bright, and rifling remains sharp. There is minor scattered erosion. In this writer’s opinion, the bore rates 8.5/10.

Overall Condition: This rifle retains approximately 95% original barrel bluing. The receiver retains about 10% faint traces of original case coloring, now primarily turned to an attractive silver patina. Metal surfaces display minor edge wear, light handling marks, and typical aging appropriate for its age. Screwheads remain sharp with minimal tool marks. All markings remain crisp and clearly visible. Overall, this rifle rates Fine antique condition.

Mechanics: The falling-block action is smooth and locks up securely. The trigger pull remains crisp and functional. As with all antique firearms, thorough inspection and cleaning are recommended before use.

Box, Paperwork & Accessories: None.

Our Assessment:

Introduced in 1885, Winchester’s Model 1885 High Wall is considered one of the finest single-shot rifle designs ever produced. Developed by the legendary firearm designer John M. Browning, this model quickly gained a reputation for strength, reliability, and accuracy. This particular example, chambered in the popular .38-55 Winchester caliber, manufactured in 1898, epitomizes the classic Winchester single-shot rifle configuration with its heavy #3 octagonal barrel and distinctive crescent buttplate.

Retaining an impressive 95% of its original barrel bluing, along with a faint but attractive silvered receiver finish from original case colors, this rifle provides collectors and shooters with a desirable combination of authenticity, condition, and historical appeal. Its strong bore condition (rated 8.5/10) further enhances its value as both a collector’s piece and an excellent vintage shooter.

This Winchester 1885 High Wall represents an opportunity to own a beautiful, historically significant firearm that offers a genuine connection to America's firearm heritage. For collectors, shooters, or Winchester enthusiasts, it would be a prized acquisition—both as an investment and as a functional piece of firearms history.

Make: Winchester

Model: 1885 High Wall

Serial Number: 74750

Year of Manufacture: 1896

Caliber: .32-40 Winchester

Action Type: Lever-Action, Single Shot, Double Set-Trigger

Markings: The top flat of the barrel is marked “—MANUFACTURED BY THE— / —WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A.—”. The top of the barrel at the breech is marked “32-40”. The lower tang is marked with the serial number “74750”.

Barrel Length: 29”

Sights / Optics: The front sight is a Lyman globe dovetailed to the barrel. The rear sight is a semi-buckhorn leaf with ramp dovetailed to the barrel. There is an adjustable Lyman aperture sight mounted to the top tang.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a straight grip and crescent steel buttplate. The forend has a schnabel tip. The LOP measures 13 3/8” from the front of the trigger to the back of the buttplate. There are light dings, nicks, and compression marks throughout the wood, with some mild darkening around the upper and lower tangs. The stock rates in about Good to Very Good overall condition.

Magazine Quantity & Condition: N/A – Single Shot

Type of Finish: Blued barrel and case-colored receiver

Finish Originality: Original

Bore Condition: The bore is semi-bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 8/10.

Overall Condition: This rifle retains about 95% of its metal finish. The balance of the finish shows mild operational wear, with notable thinning and patina on the receiver and high points of the barrel. There are scattered small nicks, light scuffs, and general age-related wear. The screw heads are lightly tooled with serviceable slots. The pins are clean. The markings are sharp. Overall, this rifle rates in about Good to Very Good condition.

Mechanics: The action does not function correctly. Hammer will not catch sear. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Winchester Model 1885, designed by the legendary John Browning, represents one of the finest single-shot rifles of the 19th century. This particular High Wall variant in .32-40 Winchester was ideally suited for small game and target shooting, and it remains a favorite among black powder cartridge enthusiasts and collectors alike.

Its 29" octagonal barrel and original case-hardened receiver offer classic lines and balance, and the High Wall configuration is admired for its strength and smooth operation. The .32-40 cartridge, a favored round for accuracy in its time, makes this rifle a fine candidate for vintage shooting matches or black powder experimentation while the double set-trigger gives an edge for precision.

As an antique, this rifle can be appreciated not only for its historic significance and aesthetic charm, but also as a tangible representation of Winchester’s craftsmanship in the late 19th century. Whether displayed or used with care, it’s a fine addition to any collection.

Make: Winchester

Model: 1885 High Wall

Serial Number: 65526

Year of Manufacture: 1893, Antique

Caliber: .40-90 Ballard

Action Type: Lever Actuated Falling Block Single Shot

Barrel Length: 29" No. 4 Heavy Octagonal Barrel

Sights / Optics: The front sight is a German silver blade set between two bases dovetailed to the barrel. The rear sight is a v-notch semi-buckhorn elevator sight dovetailed to the barrel (the riser has been removed). The top tang is drilled and tapped for a tang sight (none present), the screw is removed. 

Stock Configuration & Condition: The stocks are two-piece smooth walnut. The forend has a Schnabel tip with a triangular ebony inlay. The buttstock has a straight grip, straight comb, and steel crescent buttplate. There is a crack on the left side of both tangs. There are some scattered minor compressions, dings, nicks, and scratches. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has mostly muted and taken to a patina with oxidation throughout and some trace case color around the plate screw.  Overall, the stocks are in Good condition as Antique.

Type of Finish: Blued & Case Color

Finish Originality: Original

Bore Condition: The bore is bright with well defined to sharp rifling. There is faint erosion. In this writer’s opinion the bore rates about 8.5 out of 10.

Overall Condition: This rifle retains about 40% of its metal finish. The receiver has lost its finish and has taken to a mottled patina. The barrel has scattered oxidation and light patina but the finish remains generally strong throughout with finish loss on the leading edges, and at the muzzle.  There are some scattered spots of frost. There are some scattered nicks, dings, scuffs, and scratches. There are handling marks. The screwheads show light use. The markings are clear. Overall, this rifle is in about Very Good condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None. 

Our Assessment: When they were first manufactured, the John Browning designed Winchester Model 1885 rifles were deemed stronger than the prior Sharps rifles, and the different sight and trigger options available made them an instant hit with hunters and target shooters alike. The Model 1885 rifles were targeted at competitors in “Match Shooting”, a sport which was extremely popular from about 1871 to 1917. The Winchester rifles challenged the Sharps, Remington, Maynard and Ballard rifles, and quickly became known for their reliability and accuracy. Major Ned Roberts, inventor of the .257 Roberts cartridge, described the Model 1885 as “the most reliable, strongest and altogether best single shot rifle ever produced”.

Make: Winchester

Model: 1885 High Wall

Serial#: 25358

Year of Manufacture: 1888 (Antique)

Caliber: .32-40 Winchester

Action Type: Single-Shot, Falling-Block Rifle

Markings: The barrel is marked "MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A." and "32-40". The lower tang is marked with serial number “25358” clearly visible. Standard Winchester proofs are present.

Barrel Length: 30” Octagon

Sights / Optics: Equipped with standard iron sights including a dovetailed blade front sight and semi-buckhorn rear sight adjustable for elevation.

Stock Configuration & Condition: The rifle features a walnut straight-grip stock and matching walnut forend. The wood displays scattered light scuffs and minor scrapes, consistent with age and careful use. The crescent buttplate (#3) shows moderate wear but fits securely. Overall, the stocks remain in Very Good condition for the age of this rifle.

Type of Finish: Blued Barrel, Case-Colored Receiver and Lever

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is strong and distinct. There is minimal erosion present. In this writer’s opinion, the bore rates 8.5/10.

Overall Condition: This rifle retains approximately 90% of its original blued finish on the barrel and around 80% vibrant case color remaining on the receiver and lever. The metal exhibits light scuffs, handling marks, and minor edge wear, consistent with gentle use and careful handling over the years. Screwheads remain sharp with only slight tool marks. All markings remain crisp and clear. Overall, this rifle is in Excellent antique condition.

Mechanics: The action functions smoothly and correctly, locking up solidly. The trigger pull remains crisp. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment:

The Winchester Model 1885, designed by the legendary John M. Browning, remains a pinnacle of American firearm design. Introduced in the mid-1880s, the Model 1885 established Winchester as a leading name in precision, accuracy, and durability. This rifle, chambered in the desirable .32-40 caliber, manufactured in 1888, represents a wonderful example of an antique-era High Wall variant with its classic 30” octagon barrel, crisp original finishes, and graceful lines.

With approximately 95% original blue remaining on the barrel and around 80% rich case colors on the receiver and lever, the preservation of this rifle is remarkable given its age. The bore condition, rated at 8.5/10, further enhances the appeal of this firearm, ensuring it remains an excellent candidate for shooters looking to experience authentic vintage accuracy and collectors seeking an investment-grade Winchester. Minor handling marks and wear give the rifle a tasteful patina while maintaining strong visual appeal.

Collectors and enthusiasts alike recognize the Winchester 1885 High Wall for its unmatched quality, historical significance, and timeless aesthetic. This rifle exemplifies Winchester craftsmanship from the golden era of single-shot rifles and offers a rare combination of condition, originality, and practicality. Whether added to a carefully curated collection or taken to the range for an authentic shooting experience, this Winchester 1885 promises enduring satisfaction.

Make: Winchester

Model: 1886

Serial Number: 76610

Year of Manufacture: 1893

Caliber: .38-56 WCF

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 26", Octagonal

Sights/Optics: The front sight is a german silver blade in a slotted base dovetailed to the front of the barrel. The rear sight is a flat-top sporting "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The elevator is a replacement. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration and Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches including scattered small, but deep marks on the front of the forend and in the belly behind the bottom tang. There are some scattered spots of pooled finish and crazing, mostly in the buttstock. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white or gone to a light patina with scattered surface erosion. Overall, the stocks are in Very Good condition as refinished Antique.

Type of Finish: Blue & Case Color

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and pitting in the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 15% of its metal finish. Most remaining finish is in the bottom of the barrel and top of the magazine. There is a little other scattered finish in well protected areas or around raised features. Most surfaces of the barrel and magazine have gone to a light patina. Exposed surfaces of the receiver have mostly muted or gone to a nickel-like appearance typical of Winchester case color of this age. There are some spots of surface oxidation. There are scattered nicks, scuffs and scratches including clusters of nicks on the side flats of the barrel in front of the forend. There is some residue build-up around the edges of the stocks. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in about Very Good condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-90 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The Winchester Model 1886 was touted as a lever action express model, capable of handling any of the North American game animals.

This rifle is chambered in .38-56 WCF and has wear consistent with its age. The rifle was made in 1893 and is in Very Good overall condition as Antique. The collectors should have some interest in this rifle as an earlier 1886, but it is equally suited for a collection or restoring and taking back out in the field. Please see our photos and good luck!

Make: Winchester

Model: 1886

Serial Number: 155257

Year of Manufacture: 1917

Caliber: .33 W.C.F.

Action Type: Lever Action with Half-Length Tubular Magazine

Barrel Length: 24", Round

Sights/Optics: The front sight is a Lyman white-beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top sporting "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration and Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and checkered hard rubber Winchester shotgun-style buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There is finish wear in the handling areas and around some edges. There are no chips or cracks. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has scattered light wear and generally well defined checkering. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and pitting in the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 40% of its metal finish. The finish is thinning at all edges. The balance is mostly in the receiver which has almost completely worn to white or gone to a light patina. There is some weak finish in the bolt and a little on the lever and hammer. Strongest finish is in the barrel and magazine which show some scattered light wear, the right of the magazine has mostly gone to a light patina. There are some spots of light surface oxidation, most notable in the left receiver flat. There are some light nicks, scuffs and small scratches. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-90 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The Winchester Model 1886 was touted as a lever action express model, capable of handling any of the North American game animals.

This example is a rifle chambered in .33 W.C.F. The .33 WCF is a good medium-range hunting cartridge, with performance roughly equivalent to or slightly better than .35 Remington. The rifle has a 24" round barrel, flat-top sporting rear sight, half-length magazine and a shotgun butt. The gun shows wear consistent with its age of more than 100 years, retaining 40% original finish, a fair bore and strong mechanics. The rifle's special features will be of interest to the collectors, but it is a shame that the record for this serial number is not available. In any case, this is a neat old Winchester that will add to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1886

Serial Number: 139098

Year of Manufacture: 1906

Caliber: .33 WCF

Action Type: Lever Action Takedown with Full-Length Tubular Magazine & Set Trigger

Barrel Length: 24", Round

Sights/Optics: The front sight is a Marble 2s beaded blade dovetailed to a base fixed the front of the barrel. The blade can be reversed to present either a white or a brass bead (requires removal from the dovetail). The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The sight has been altered to a flat-top profile. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration and Condition: The stocks are two-piece checkered walnut with a capped forend, capped pistol grip, straight comb, checkered hard rubber Winchester shotgun-style buttplate, and sling eyelets front and rear. There are small losses in the wrist around the edges of the top tang. There is a crack in the bottom-front of the grip between the cap and bottom tang. There are some scattered light nicks, scuffs and scratches with a few more notable dings on the right of the stock and forend. The drop is notably lower than standard M1886 stocks (noted in records). The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has scattered light wear, a small loss at the toe, and generally well defined checkering. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. There is scattered finish wear, more in the receiver and barrel extension than the barrel or magazine tube. The tube shows standard wear consistent with disassembly/reassembly. There are scattered light nicks, scuffs and scratches including a cluster of nicks on the bottom-right of the barrel extension. Some worn areas show minor discoloration from oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-Very Good condition.

Mechanics: The action functions correctly including the set-trigger. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: Included is a Cody Firearms Records Office Records Search that indicates this rifle was produced in .33 WCF with a set-trigger, pistol grip stock, rubber shotgun butt, takedown, checkered stocks, screw eyes, and a drop 1 inch more than regular, received in warehouse and shipped November 5, 1906 on order number 60462.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-90 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The Winchester Model 1886 was touted as a lever action express model, capable of handling any of the North American game animals.

This example is a takedown rifle chambered in .33 WCF, a good medium-range hunting cartridge, with performance roughly equivalent to or slightly better than .35 Remington. The gun is going to be very popular with Winchester collectors due to its particularly rare special-order configuration. Apart from being a takedown, there are no fewer than six special order features, putting this rifle into the category of potentially unique. It was ordered with checkered stocks, pistol grip, shotgun butt, sling eyelets, set-trigger and, perhaps most scarce, specified as having a drop 1" more than regular. The gun shows wear consistent with its age, retaining 60% original finish, a decent bore, strong mechanics, and all of the special order features noted in Winchester's records. It would be a wonderful addition to even an advanced collection of the Winchester 1886. Please see our photos and good luck!

Make: Winchester

Model: 1886

Serial Number: 137666

Year of Manufacture: Ca. 1905

Caliber: .33 WCF (Winchester Center Fire)

Action Type: Lever Action Rifle with Tubular Magazine

Markings: The top of the barrel is marked “MANUFACTURED BY THE / -WINCHESTER REPEATING ARMS CO. NEW HAVEN, CONN. U.S.A.-” and at the receiver with “33 W.C.F.". The lower tang is marked -“PAT. OCT. 14.1884. / JAN. 20.1885”- and “137666A”. There are Winchester proofs on the chamber ring and the top-rear of the barrel.

Barrel Length: 24", Round

Sights / Optics: The front sight is a Lyman beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a Marble's "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation and can be reversed to present a smaller "V"-notch. The top tang is drilled, tapped and filled for a tang sight (none present). The sights are not original to the rifle.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and checkered hard rubber Winchester buttplate. There is a six-pointed bronze start with beaded points screwed to the right of the buttstock and a Jose Morelos peso inlaid and glued on the left. There are scattered nicks, scuffs and scratches. There are a few minor cracks and tiny losses around the edges. There is a more notable repaired chip-loss at the toe. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has light wear with a matching repaired loss at the toe, and generally well defined checkering. Neither of the repairs were made with the original piece. Overall, the stocks are in Good-plus condition as repaired and customized.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is light erosion scattered through the bore. In this writer's opinion, the bore rates 7+ out of 10.

Overall Condition: This rifle retains about 85% of its metal finish. The finish is thinning at all edges. Mot notable finish wear is in the bottom of the receiver. There is some scattered more minor wear. There are scattered light nicks, scuffs and scratches with infrequent minor surface oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. The hammer has a half-cock notch. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-70 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The design was touted as a lever action express model, capable of handling any of the North American game animals.

This example is from 1905 with a 24" round barrel chambered for .33 W.C.F. The .33 WCF is a good medium-range hunting cartridge, with performance roughly equivalent to or slightly better than .35 Remington. At nearly 120 years old, the rifle appears to have seen use in the field. It was likely someone's favorite rifle as a previous owner repaired and decorated the stock. The rifle still has a decent bore and strong mechanics, it may still prove worthy to head back out in the field. Of course, no Winchester collection would be complete without an 1886 or two. Please see our photos and good luck!

Make: Winchester

Model: 1886

Serial Number: 136269

Year of Manufacture: 1906

Caliber: .40-82 W.C.F.

Action Type: Lever Action with Half-Length Tubular Magazine

Barrel Length: 26", 1/2 Round, 1/2 Octagonal

Sights/Optics: The front sight is a Marble No. 2 brass beaded blade dovetailed to the front of the barrel. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present). The condition of the elevator indicates that it is a replacement, the front sight is likely not original to the gun.

Stock Configuration and Condition: The stocks are two-piece smooth walnut with a capped forend, capped pistol grip, straight comb and checkered hard rubber Winchester shotgun-style buttplate. There are small losses at the top-front corner of the wrist and forend on the right side. There are some scattered nicks, dings, scuffs and scratches. There is a spot of white residue at the toe and a few spots of pooled finish. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has wear around the edges with well defined checkering. Overall, the stocks are in Good-plus condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and pitting in the bore. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains about 15% of its metal finish. There is some finish remaining on the flats of the octagonal portion of the barrel, on the bolt, and some on the bottom tang. Most surfaces have worn to white or gone to a light patina. There are some areas of stubborn, dried grease. There is some scattered light surface oxidation and minor erosion. There are scattered nicks, scuffs and scratches, most notable at the bottom edge of the left receiver flat. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are generally clear, the patent markings on the bottom tang are partially obscured by oxidation. Overall, the rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: Included is a Cody Firearms Records Office Records Search that indicates this rifle was produced in .40-82 with a 1/2 Octagon barrel, pistol grip stock, 1/2 magazine, rubber shotgun butt, received in warehouse September 20, 1906 and shipped September 21, 1906 on order number 70214.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-90 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The Winchester Model 1886 was touted as a lever action express model, capable of handling any of the North American game animals.

This example is a rifle chambered in .40-82 WCF, one of the original chamberings for this model. The gun has some special order features confirmed by Winchester factory records including a 1/2 octagon barrel, 1/2 length magazine, pistol grip and shotgun butt. The gun shows wear consistent with its age, retaining a little original finish, a decent bore, strong mechanics, and all of the special order features noted in Winchester's records. It would be a neat addition to a collection missing a Winchester 1886, especially in its scarce configuration. Please see our photos and good luck!

Make: Winchester

Model: 1886

Serial Number: 128717

Year of Manufacture: 1904

Caliber: .45-70 Government

Action Type: Lever Action with Half-Length Tubular Magazine

Barrel Length: 22", Round

Sights/Optics: The front sight is a Rocky Mountain sight, its steel blade has a vertical line of platinum in the rear face, set in a slotted base dovetailed to the front of the barrel. The rear sight is a flat-top sporting "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. These sights are indicated as factory in the Winchester records. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration and Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and checkered hard rubber Winchester shotgun-style buttplate. There is a sling eyelet in the belly. The bottom-front of the forend and the bottom of the forend cap each have a hole for a sling mount, but none is present. There is adhesive residue around the hole in the forend cap. There is a thin crack across the hole in the bottom-front of the forend. The stocks have scattered nicks, dings, scuffs and scratches. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has scattered light wear, a tiny loss at the toe, and generally well defined checkering. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is some scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 70% of its metal finish. The finish is thinning at all edges. There is scattered finish wear, more in the receiver than the barrel or magazine tube. Most worn areas are going to a light patina, the bottom of the receiver is mostly worn to white. There are scattered light nicks, scuffs and scratches. There is some minor surface oxidation, mostly on the right receiver flat. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: Included is a Cody Firearms Records Office Records Search that indicates this rifle was produced in .45-70 Government with a 22" round barrel, rubber shotgun butt, 1/2 magazine, Rocky Mountain front and flat-top sporting rear sights, received in warehouse January 14, 1904 and shipped January 15, 1904 on order number 218164. The records do not mention sling eyes.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-90 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The Winchester Model 1886 was touted as a lever action express model, capable of handling any of the North American game animals.

This example is a rifle chambered in .45-70 Government, a powerful black powder rifle cartridge that has seen a recent renaissance with tube-magazine safe spitzer bullets. The rifle was ordered with a 22" round barrel, Rocky Mountain front and flat-top sporting rear sights, half-length magazine and a shotgun butt. The gun shows light wear for its age of more than 120 years, retaining 70% original finish, a decent bore, strong mechanics, and all of the special order features noted in Winchester's records, though the sling eyelet is not mentioned in the records. It would be a wonderful addition to a collection of the Winchester 1886 and may still prove able to do more work in the field. Please see our photos and good luck!

Make: Winchester

Model: 1886

Serial Number: 127791

Year of Manufacture: 1902

Caliber: .33 W.C.F.

Action Type: Lever Action with Full-Length Tubular Magazine

Barrel Length: 24", Round, Rapid-Taper (0.940” at receiver, 0.642” at muzzle)

Sights/Optics: The front sight is a blade in a slotted base dovetailed to a base fixed to the front of the barrel. The front portion of the blade is steel, the rear portion is brass brazed to the front portion. The rear sight is a semi-buckhorn "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The set-screw for the notch has a disfigured slot. The top tang is drilled and tapped with a folding tang sight installed, adjustable for elevation.

Stock Configuration and Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and checkered hard rubber Winchester shotgun-style buttplate. There is a large hollow in the rear face of the buttstock under the buttplate. There is a crack at the heel. The stocks have scattered nicks, dings, scuffs and scratches. There are some marks in the front of the comb from the tang sight. There is some discoloration around the edges where the metal meets wood. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has scattered light-moderate wear and fairly well defined checkering. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original to the parts. The barrel markings indicate that the barrel is a replacement, the ovalled “WP” proofs on the barrel and receiver likely indicate alteration or repair at the factory.

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and pitting in the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 40% of its metal finish. The finish is thinning at all edges. The balance is mostly in the receiver which has a little scattered finish, but has mostly worn to white. There is other scattered wear on the barrel and magazine. There is some scattered minor oxidation, mostly in the worn areas. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads are generally sharp, the mounting screws for the tang sight are disfigured with usable slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-90 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The Winchester Model 1886 was touted as a lever action express model, capable of handling any of the North American game animals.

This example is a rifle with a 24" round barrel chambered in .33 W.C.F. The .33 WCF is a good medium-range hunting cartridge, with performance roughly equivalent to or slightly better than .35 Remington. The gun shows wear consistent with its age of more than 100 years, retaining 40% original finish, a fair bore and strong mechanics. This is a neat old Winchester that will add to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1886 Carbine

Serial Number: 155156

Year of Manufacture: Ca. 1917

Caliber: .50-110 Express

Action Type: Lever Action Rifle with Tubular Magazine

Markings: The left of the barrel is marked “MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. / NEW HAVEN, CONN. U.S.A. PAT. OCT. 14.1884. JAN. 20.1885” and at the receiver with “50-EX.". The lower tang is marked “155156 A”. The top tang is marked "MODEL 1886 / -WINCHESTER- / TRADE MARK". There are Winchester proofs on the chamber ring and the top-rear of the barrel.

Barrel Length: 22", Round

Sights / Optics: The front sight is a blade pinned to a slotted base in front of the front barrel band. The rear sight is a folding ladder-style sight presenting a "V"-notch when folded down and with a "V"-notched slider on the ladder, graduated from 0-30. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb, and steel carbine-style buttplate. The stocks have some scattered light nicks, scuffs and scratches. There is a more notable ding in the left of the wrist. There is a ding in the front of the comb, possibly from a previously installed tang sight. There are no chips or cracks. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has wear on the top tang, some nicks in the face, mostly at the heel, and infrequent minor erosion. Overall, the stocks are in Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion and some stubborn fouling in the bore. In this writer's opinion, the bore rates 8+ out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at most edges. There are some nicks and scratching on the magazine tube in front of the forend. There is light handling wear on the bottom of the receiver. There are a few other scattered minor nicks, scuffs and scratches. There is infrequent minor surface erosion, most notable at the top-rear of the receiver to each side of the bolt. The top tang shows light wear from a previously installed tang sight. Some worn areas show minor oxidation. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. The hammer has a half-cock notch. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included are printouts of photos showing the rifle in various states of disassembly to show the bottom barrel markings, indexing screw cuts on the barrel and magazine, and the receiver tangs.

Our Assessment: Winchester’s first attempt at a lever action rifle capable of handling a rifle cartridge was the Model 1876, which was a heavier framed version of the Model 1873. However, the toggle-link action used in the gun was still limited to short cartridges like the .40-60 and .45-60 Win. The Model 1886 was made to handle longer cartridges like the .45-70 Govt., and the .45-70 Win. and .50-110 Win. cartridges. The Model 1886 utilized a locked-bolt action that was much stronger than the M1876, and some think it is faster and smoother as well. The design was touted as a lever action express model, capable of handling any of the North American game animals.

The 1886 was available in a variety of cartridges over its nearly 40 years of production with this example having a barrel chambered for .50-110 Express, a cartridge introduced to the line in 1887. The .50-110 Express is one of the most powerful cartridges ever to be chambered in a lever action rifle and would have been suitable for just about any game a hunter could expect to encounter in 1911. This example is a saddle ring carbine, a configuration that was only found on about half a percent of production. Carbines in this chambering are even more scarce, making this a great find for collectors, especially in its high condition. This 1886 Express Carbine will be a nice addition to even an advanced Winchester or lever gun collection, but should also still prove to be a handy, but potent hunting rifle. Please see our photos and good luck!

This is a full box of Winchester 50-110-300 Cartridges made for Winchester Model 1886 Rifles. This box features the Orange Label, and bears the “Smokeless”, and "STAYNLESS” designations, as well as the very rare and collectible Red “W” on the box ends. The 1927 dated box is in Good condition with some thinning of the corners and edges. The cartridges are in Very Good condition.

Here are 2 very nice Vintage boxes, 40 rounds of Remington-UMC .40-82 Winchester ammunition, loaded with 260 grain soft point bullets. These are the classic green boxes with the red “Dog Bone” Logo. The boxes are in Very Good condition, with one end flap beginning to separate, and one edge coming unglued. The cartridges inside are in Very Good condition. A rare and unusual find that would make an amazing addition to any display.

Make: Winchester

Model: 1892 Trapper Carbine

Serial Number: 994171

Year of Manufacture: ca. 1928

Caliber: .44-40 Winchester (.44 WCF)

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 15"", Round

Sights / Optics: The front sight is a blade pinned in a slotted base at the front of the barrel. The rear sight is a folding ladder-style sight presenting a ""V""-notch when folded down. There is a ""U""-notched slider on the ladder arm which is graduated from 0-20. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb and steel carbine-style buttplate. The stocks have scattered nicks, scuffs and scratches. There is a small loss at the left-front edge of the forend. The LOP measures 12 3/4"" from the front of the trigger to the back of the buttplate. The plate has gone to a patina with scattered surface erosion. Overall, the stocks are in Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent light erosion in the bore. In this writer's opinion, the bore rates 7 or 8 out of 10.

Overall Condition: This rifle retains about 5% of its metal finish. Finish remains only in some well protected areas and around raised features. Other surfaces have mostly worn to white or gone to a light patina. There are some scattered light nicks and scratches with infrequent minor erosion. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: Included is an October 22, 1981 dated letter, in triplicate, from the BATF exempting this rifle by serial number from the provisions of the NFA and granting it C&R status, signed by Assistant Director C. Michael Hoffman.

Our Assessment: The Winchester Model 1892 was introduced as the successor to the iconic “Winchester ’73”, and replaced the toggle link action of the Model 1873 with a breechblock locked with two rectangular locking bolts, making the action much stronger. It was designed by gunmaking genius John Moses Browning, and was essentially a scaled-down version of his Model 1886 rifle, the first he designed for Winchester. The Model 1892 was small and light, and ideal for the classic .44-40 WCF round and similar pistol caliber cartridges. The Model 1892 rifle was popular with ranchers, and later was the lever action of choice for many Western movies and TV shows. John Wayne famously used both M-1892 rifles and carbines in many of his iconic cowboy roles.

This example is a particularly special piece, a ""Trapper"" or ""Baby"" carbine. The standard Carbine had a 20"" barrel, but they were available by special order with shorter barrels and this one is 15"". Only about one third of one percent of Carbine production had a shorter than standard barrel. The little rifles' significance would increase in 1934 when some very silly people known as ""Congressmen"" decided that a rifle could have a barrel that was too short. Thankfully, an even sillier group of people at the ATF have designated this particular rifle, by serial number, as exempt from the NFA, so it can be sold without doing too much silly paperwork. The original ATF letter (in triplicate) is included with the rifle.

The rifle shows its age, but retains a strong bore and good mechanics. It will certainly be of interest to collectors and will make a wonderful addition to even an advanced Winchester collection. Please see our photos and good luck!

Make: Winchester

Model: 1892 Trapper Carbine

Serial Number: 939107

Year of Manufacture: ca. 1925

""Firearms removed from the provisions of the National Firearms Act and classified as curios or relics""

""Winchester, Model 1892 or 92 carbine, cal. .32 WCF, S/N 939107, with 14-inch barrel.""

https://www.atf.gov/file/128116/download

Caliber: .32-20 Winchester (.32 WCF)

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 14"", Round

Sights / Optics: The front sight is a blade pinned in a slotted base at the front of the barrel. The rear sight is a folding ladder-style sight presenting a square notch when folded down. There is a ""U""-notched slider on the ladder arm which is graduated from 0-20. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb and steel carbine-style buttplate. The stocks have scattered nicks, scuffs and scratches. There is some discoloration around the edges where the wood meets metal. We don't see any evidence of sanding, but there are some spots of pooled finish on the forend which likely indicates a new finish was applied. The LOP measures 12 3/4"" from the front of the trigger to the back of the buttplate. The plate has scattered wear with some minor surface erosion, mostly at the heel and toe. Overall, the stocks are in Very Good condition.

Type of Finish: Blue

Finish Originality: Most remaining finish is Original, worn areas of the receiver show treatment with cold blue.

Bore Condition: The bore is semi-bright with sharp rifling. There is some light erosion in the bore and infrequent pitting, mostly in the top of the bore about mid-way down. In this writer's opinion, the bore rates 6+ out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. The barrel and magazine have some scattered light wear. The receiver shows more notable finish wear with worn areas treated with cold blue. There is distinct wear on the left receiver flat around the sling swivel. There is infrequent minor surface erosion, nearly all in the receiver. There are some scattered light nicks, scuffs and small scratches. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-plus condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1892 was introduced as the successor to the iconic “Winchester ’73”, and replaced the toggle link action of the Model 1873 with a breechblock locked with two rectangular locking bolts, making the action much stronger. It was designed by gunmaking genius John Moses Browning, and was essentially a scaled-down version of his Model 1886 rifle, the first he designed for Winchester. The Model 1892 was small and light, and ideal for the classic .32-20 WCF round and similar pistol caliber cartridges. The Model 1892 rifle was popular with ranchers, and later was the lever action of choice for many Western movies and TV shows. John Wayne famously used both M-1892 rifles and carbines in many of his iconic cowboy roles.

This example is a particularly special piece, a ""Trapper"" or ""Baby"" carbine. The standard Carbine had a 20"" barrel, but they were available by special order with shorter barrels and this one is 14"". Only about one third of one percent of Carbine production had a shorter than standard barrel. The little rifles' significance would increase in 1934 when some very silly people known as ""Congressmen"" decided that a rifle could have a barrel that was too short. Thankfully, an even sillier group of people at the ATF have designated this particular rifle, by serial number, as exempt from the NFA, so it can be sold without doing too much silly paperwork.

The rifle shows its age, but retains a decent bore and strong mechanics. It will certainly be of interest to collectors and will make a wonderful addition to even an advanced Winchester collection. Please see our photos and good luck!

Make: Winchester

Model: 1892 Takedown

Serial Number: 934948

Year of Manufacture: 1924

Caliber: .25-20 WCF

Action Type: Takedown Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 24”, Octagonal

Sights / Optics: The front sight is a beaded blade dovetailed to the barrel the bead shows wear and does not appear to be original to the sight. The rear sight is a Winchester Express sight with three folding "V"-notch leaves marked "50", "1" and "2", dovetailed to the rear of the barrel. The top flat of the barrel is matted for glare reduction. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered light nicks, scuffs and scratches, most have been finished-over. There are no chips or cracks. The LOP measures 12 7/8” from the front of the trigger to the back of the buttplate. The buttplate has mostly worn to white or gone to a light patina with scattered surface erosion. Overall, the stocks rate in Very Good condition as refinished.

Type of Finish: Blue

Finish Originality: Original, the bore has been re-lined.

Bore Condition: The bore is mostly bright with sharp rifling. There is no erosion in the bore, but there is some stubborn fouling. In this writer's opinion, the bore rates 8+ out of 10 as re-lined.

Overall Condition: This rifle retains about 35% of its metal finish. The finish is thinning at all edges. The receiver and barrel extension are mostly worn to white. There is scattered finish wear on the barrel and magazine. The magazine also shows wear from disassembly/reassembly. There is scattered surface erosion in the receiver and barrel extension. There is scattered minor surface oxidation, mostly in the worn areas. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1892 Rifle made in 1924, just a few years before production of the model began to drop off during the Great Depression. The rifle is chambered in .25-20 Winchester with a 24" octagonal barrel and a couple of neat features. First, the rifle is a takedown, quickly able to separate the barrel and magazine from the receiver for storage or transport. The rear sight is a Winchester Express sight with three folding "V"-notches. Perhaps most scarce is the matting applied along the entire top flat of the barrel, with an offset Winchester proof indicating that this is a factory feature. The bore has been re-lined, so this should prove to be a good shooter. The 1892 is a classic Winchester lever gun, making appearances in a wild array of Western movies and television shows as well as seeing extensive use all across America as a hunting and utility rifle. This rifle with its special-order features should be of interest to the Winchester collectors. Please see our photos and good luck!

Make: Winchester

Model: 1892 Rifle

Serial Number: 623626

Year of Manufacture: 1911

Caliber: .25-20 WCF

Action Type: Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 24”, Round

Sights / Optics: The front sight is a beaded blade dovetailed to the front of the barrel. The rear sight is a folding ladder-style sight, presenting a "V"-notch when down and with a "U"-notch slider on the ladder. The slider is fairly loose on the ladder. The top tang is drilled and tapped with a folding tang sight installed, adjustable for elevation.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate. There are holes in the belly and the bottom of the forend for sling studs (none present). There is a short, thin crack on the right-front of the forend and a long, thin crack in the bottom-front. There are cracks in each side of the wrist. There is material loss around the hole in the belly. The stocks have scattered nicks, scuffs and scratches. The LOP measures 12 7/8” from the front of the trigger to the back of the buttplate. The buttplate has mostly worn to white with scattered surface erosion. Overall, the stocks rate in Good condition.

Type of Finish: Blue

Finish Originality: Remaining finish is Original to the parts. Worn areas of the receiver show treatment with cold blue. The barrel markings indicate it is a later replacement.

Bore Condition: The bore is mostly bright with sharp rifling. There is some light erosion in the bore. In this writer's opinion, the bore rates about 8 out of 10.

Overall Condition: This rifle retains about 70% of its metal finish. The finish is thinning at all edges. The barrel has generally strong finish with some scattered light wear. The receiver has a mottled appearance with some original finish and worn areas showing treatment with cold blue. There are scattered nicks and scratches. The receiver has some minor surface erosion. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in about Very Good condition as not parts-original.

Mechanics: The action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester 1892 is essentially a Model 1886 action which was miniaturized for use with pistol caliber cartridges. Just as the 1886 would replace the 1876, the 1892 would replace the 1873. As the 1886 was designed by John Browning, it was not difficult for him to develop the 1892. After boasting to Winchester that he would have a prototype within a month, he actually had a functioning prototype in only two weeks. The Model 1892 rifle was popular with ranchers and later was the rifle of choice for western movies and TV shows, John Wayne used both M1892 rifles and carbines in many of his western movies. The M1892 rifles again became popular in the 1980s with the advent of Cowboy Action shooting, as they were smooth and dependable.

This is a Winchester Model 1892 Rifle made in 1911. The rifle is chambered in .25-20 Winchester and has a 24" round barrel. The barrel markings indicate that it is a later replacement. The rifle is in about Very Good condition retaining about 70% of its metal finish with a strong bore and good mechanics. This will be a nice piece to add to a collection and should still prove to be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 1892 Trapper Carbine

Serial Number: 845258

Listed by serial number: ""Firearms removed from the provisions of the National Firearms Act and classified as curios or relics""

""Winchester, Model 1892 or 92 carbine, cal. .44 WCF, S/N 845258, with 14-inch barrel.""

https://www.atf.gov/file/128116/download

Year of Manufacture: ca. 1917

Caliber: .44-40 Winchester (.44 WCF)

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 14"", Round

Sights / Optics: The front sight is a blade pinned in a slotted base at the front of the barrel. The rear sight is a folding ladder-style sight presenting a ""V""-notch when folded down. The slider is missing from the ladder arm which is graduated from 0-20. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb and steel carbine-style buttplate. There is an ""EC"" monogram brand on the left of the buttstock. The forend has a gap to the receiver. There are notable bruises above the sling swivel in the belly on each side. The stocks have scattered nicks, dings, scrapes and scratches. Some of these have removed or damaged portions of the surface wood. There are cracks in the front of the forend on each side. There are some losses around the edges. The LOP measures 12 3/4"" from the front of the trigger to the back of the buttplate. The plate has gone to a patina with scattered surface erosion. Overall, the stocks are in Good condition.

Type of Finish: Blue, Casehardened Lever & Hammer

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered erosion and pitting in the bore, more notable at the muzzle. In this writer's opinion, the bore rates 5 out of 10.

Overall Condition: This rifle retains about 5% of its metal finish. Finish remains only in some well protected areas and around raised features. Other surfaces have mostly worn to white, showing evenly scattered surface erosion. There are some areas of pitting. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to obscured by erosion. Overall, this rifle is in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1892 was introduced as the successor to the iconic “Winchester ’73”, and replaced the toggle link action of the Model 1873 with a breechblock locked with two rectangular locking bolts, making the action much stronger. It was designed by gunmaking genius John Moses Browning, and was essentially a scaled-down version of his Model 1886 rifle, the first he designed for Winchester. The Model 1892 was small and light, and ideal for the classic .44-40 WCF round and similar pistol caliber cartridges. The Model 1892 rifle was popular with ranchers, and later was the lever action of choice for many Western movies and TV shows. John Wayne famously used both M-1892 rifles and carbines in many of his iconic cowboy roles.

This example is a particularly special piece, a ""Trapper"" or ""Baby"" carbine. The standard Carbine had a 20"" barrel, but they were available by special order with shorter barrels and this one is 14"". Only about one third of one percent of Carbine production had a shorter than standard barrel. The little rifles' significance would increase in 1934 when some very silly people known as ""Congressmen"" decided that a rifle could have a barrel that was too short. Thankfully, an even sillier group of people at the ATF have designated this particular rifle, by serial number, as exempt from the NFA, so it can be sold without doing too much silly paperwork.

The rifle shows its age, appearing to have been a working gun based on the brand on the stock. It will certainly be of interest to collectors and will make a wonderful addition to even an advanced Winchester collection. Please see our photos and good luck!

Make: Winchester

Model: 1892

Serial Number: 907149

Year of Manufacture: 1921, C&R

Caliber: .25-20 Winchester Center Fire (.25-20 WCF)

Action Type: Lever-Action, Tubular Magazine-Fed

Markings: The top of the barrel is marked “ .25-20 W.C.F.” The top of the barrel and receiver are marked with the Winchester proof mark “WP” in oval. The upper tang is marked “MODEL 1892 / -WINCHESTER- / TRADE MARK REG. IN U.S. PAT. OFF.” The lower tang is marked with the serial number “907149”.

Barrel Length: 24”.

Sights / Optics: The front sight is a blade dovetailed to the barrel. The rear sight is a u-notch leaf with ramp dovetailed to the barrel.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a straight grip, straight comb, and steel crescent buttplate. The forend has a steel nose cap. The LOP measures 13” from the front of the trigger to the back of the buttplate. The stocks show scattered compressions, scratches, small nicks, and dings. There are no cracks or structural issues. The wood remains sound with honest wear and age-appropriate character. The stocks rate in about Good overall condition.

Magazine Quantity & Condition: Full-length tubular magazine.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright, the rifling is semi-sharp. There is light visible erosion in the bore. In this writer’s opinion, the bore rates 7/10.

Overall Condition: This rifle retains about 60% of its metal finish. The balance of the finish shows general thinning and operational wear, with some spots of finish loss, patina, and rust freckling throughout. The receiver has mostly worn to white. The screw heads are lightly tooled but serviceable. The pins are clean. The markings are sharp. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Winchester Model 1892 was one of John Browning’s finest designs, built on the legacy of the earlier Models 1873 and 1886, but scaled down to accommodate pistol calibers with sleekness and efficiency. Its smooth action and durability made it a favorite among ranchers, trappers, and outdoorsmen throughout the 20th century.

This example, manufactured in 1921, is chambered in the now less-common .25-20 WCF cartridge, originally developed for small game and varmint hunting. The cartridge is mild-recoiling and accurate, lending itself well to the Model 1892’s lightweight and quick-handling profile. With a 24” barrel and iron sights, it offers classic lines and period-correct performance.

Collectors will appreciate the honest wear, sharp markings, and strong mechanical condition. Whether you're interested in a solid example of early 20th-century Winchester craftsmanship or want a functional shooter in a nostalgic chambering, this Model 1892 offers both historical charm and enduring utility.

Make: Winchester

Model: 1892 Saddle Ring Carbine

Serial Number: 841385

Year of Manufacture: 1917

Caliber: .38-40 WCF

Action Type: Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 20”, Round

Sights / Optics: The front sight is a blade pinned to a slotted base fixed to the barrel. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel. The notch has a white diamond aiming reference, is fine adjustable for elevation, and can be reversed to present a "V"-notch. The rear sight is not original to the gun. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a banded forend, straight grip, straight comb, and steel shotgun-style buttplate. The stocks have scattered light nicks, scuffs and scratches with a few more notable dings. There is more notable wear around the forend band. There are no chips or cracks. The LOP measures 12 7/8” from the front of the trigger to the back of the buttplate. The buttplate has wear at the heel and scattered light surface erosion, mostly under the finish. Overall, the stocks rate in Very Good condition as refinished.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and pitting in the bore. In this writer's opinion, the bore rates 5 out of 10.

Overall Condition: This rifle retains about 40% of its metal finish. The finish is thinning at all edges. The receiver is mostly worn to white. There is scattered light finish wear on the barrel. There is some scattered minor surface oxidation, mostly in the worn areas. There are scattered nicks, scuffs and scratches. There is wear around the saddle ring staple, the ring is missing. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1892 Saddle Ring Carbine made in 1917, before production of the model began to drop off during the Great Depression. The rifle is chambered in .38-40 Winchester, has a 20" round barrel, a half-length "button" magazine and a shotgun-style buttplate. This rifle is in Good condition, retaining about 40% original metal finish, a fair bore and good mechanics. The 1892 is a classic Winchester lever gun, making appearances in a wild array of Western movies and television shows as well as seeing extensive use all across America as a hunting and utility rifle. This rifle with its special-order features should be of interest to the Winchester collectors. Please see our photos and good luck!

Make: Winchester

Model: 1892 Saddle Ring Carbine

Serial Number: 796202

Year of Manufacture: 1915

Caliber: .32-20 WCF

Action Type: Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 20”, Round

Sights / Optics: The front sight is a blade pinned to a slotted base fixed to the barrel in front of the front band. The rear sight is a "V"-notch dovetailed to the rear of the barrel. The sights are not original to the gun, the rear sight is loose in its dovetail. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a banded forend, straight grip, straight comb, and steel carbine-style buttplate. There is a short crack at the rear of the bottom tang and a small loss at the top-front corner of the wrist on the left. The stocks have scattered nicks, dings, scuffs and scratches, most are finished over. The LOP measures 12 3/4” from the front of the trigger to the back of the buttplate. The buttplate shows treatment with cold blue and scattered surface erosion. Overall, the stocks rate in Good condition as refinished.

Type of Finish: Blue

Finish Originality: Refinished, the magazine tube is not original to the gun.

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion and minor pitting in the bore. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains about 10% of its current metal finish. The new magazine tube retains strong finish. Other surfaces have gone to a mottled patina. There are scattered tool marks on the barrel, most notable around the rear sight dovetail. The bottom of the barrel has a notch just in front of the forend, indicating the original magazine was half-length. The saddle ring is missing from the receiver staple. There is scattered erosion. There are scattered nicks and scratches. The magazine appears to be bent slightly (see Mechanics). The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Fair-Good condition as refinished and not parts-original.

Mechanics: The lever appears bent slightly, coming into contact with the bottom tang before the locking lugs are all the way up. Otherwise, the action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1892 Saddle Ring Carbine made in 1915, before production of the model began to drop off during the Great Depression. The rifle is chambered in .32-20 Winchester and has a 20" round barrel. This rifle is in Fair-Good condition, having had a new magazine and sights installed, refinished, and with odd tool marks on the barrel. The lever appears to be bent slightly, preventing the locking lugs from going all the way up when the action is closed. The 1892 is a classic Winchester lever gun, making appearances in a wild array of Western movies and television shows as well as seeing extensive use all across America as a hunting and utility rifle. This rifle should be of interest to the Winchester collectors and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1892 Saddle Ring Carbine

Serial Number: 788585

Year of Manufacture: 1915

Caliber: .44-40 WCF

Action Type: Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 20”, Round

Sights / Optics: The front sight is a blade pinned to a slotted base fixed to the barrel behind the front band. The rear sight is a folding ladder-style sight, presenting a "U"-notch when down and with a "U"-notch slider on the ladder. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a banded forend, straight grip, straight comb, and steel carbine-style buttplate. There is cracking around the heel, a crack on the left-rear edge of the stock and one at the left-front edge of the wrist. The stocks have scattered nicks, dings, scuffs and scratches. The LOP measures 12 3/4” from the front of the trigger to the back of the buttplate. The buttplate shows treatment with cold blue and scattered surface erosion. Overall, the stocks rate in Good condition as refinished.

Type of Finish: Blue

Finish Originality: Refinished

Bore Condition: The bore is dark with well defined rifling. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates about 4 out of 10.

Overall Condition: This rifle retains about 70% of its current metal finish. The finish is thinning at all edges. The balance is mostly in the receiver which has strong finish in the tangs, but has otherwise mostly worn to white. There is a little other scattered minor finish wear. The worn areas of the receiver show minor surface erosion. There are tool marks under the finish on each side of the barrel in front of the rear sight. There are some nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in Good-plus condition as refinished.

Mechanics: The action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1892 Saddle Ring Carbine made in 1915, before production of the model began to drop off during the Great Depression. The rifle is chambered in .44-40 Winchester and has a 20" round barrel. This rifle is in Good-plus condition as refinished, showing wear consistent with its age of more than a century. The 1892 is a classic Winchester lever gun, making appearances in a wild array of Western movies and television shows as well as seeing extensive use all across America as a hunting and utility rifle. This rifle should be of interest to the Winchester collectors and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1892 Rifle

Serial Number: 44171

Year of Manufacture: 1894

Caliber: .32-20 WCF

Action Type: Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 24”, Octagonal

Sights / Optics: The front sight is a blade dovetailed to the front of the barrel. The blade had a bead, but it has broken or fallen off. The rear sight is a "V"-notch elevator sight dovetailed into the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped, and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There is a repaired chip-loss at the top-front corner of the forend on the left. There are some spots of pooled finish. The LOP measures 12 7/8” from the front of the trigger to the back of the buttplate. The buttplate has mostly muted or gone to a light patina with scattered spots of surface oxidation. Overall, the stocks rate in Very Good condition as refinished Antique.

Type of Finish: Blue

Finish Originality: Remaining finish is Original, the magazine tube shows treatment with cold blue.

Bore Condition: The bore is dark gray with fairly well defined rifling. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates about 5 out of 10.

Overall Condition: This rifle retains about 5% of its metal finish. Remaining finish is scattered, mostly blending well with the surfaces that have gone to a patina. There is some scattered minor surface oxidation and infrequent erosion. There are some scattered nicks and scratches including a cluster on the left shoulder of the barrel over the forend cap. There is some residue from the stocks' new finish around the edges of the wood. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in Very Good condition as Antique.

Mechanics: The action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester 1892 is essentially a Model 1886 action which was miniaturized for use with pistol caliber cartridges. Just as the 1886 would replace the 1876, the 1892 would replace the 1873. As the 1886 was designed by John Browning, it was not difficult for him to develop the 1892. After boasting to Winchester that he would have a prototype within a month, he actually had a functioning prototype in only two weeks. The Model 1892 rifle was popular with ranchers and later was the rifle of choice for western movies and TV shows, John Wayne used both M1892 rifles and carbines in many of his western movies. The M1892 rifles again became popular in the 1980s with the advent of Cowboy Action shooting, as they were smooth and dependable.

This is a Winchester Model 1892 Rifle made in 1894. The rifle is chambered in .32-20 Winchester and has a 24" octagonal barrel. The rifle is in Very Good condition as Antique, showing wear consistent with its age of more than 130 years. This will be a nice piece to add to a Winchester collection. Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 1892 Saddle Ring Carbine

Serial Number: 306240

Year of Manufacture: 1905

Caliber: .44-40 Winchester (.44 WCF)

Action Type: Lever Action, Tubular Magazine Fed

Barrel Length: 20", Round

Sights / Optics: The front sight is a blade pinned in a slotted base fixed to the front of the barrel. The rear sight is a folding ladder-style sight, presenting a "V"-notch when folded down and with a "V"-notched slider on the ladder, marked from "0" to "20". The top tang is drilled, tapped and filled for a peep sight (none included).

Stock Configuration & Condition: The stocks are 2-piece smooth walnut with banded forend, straight grip and case-color steel carbine-style buttplate. The stocks have a few scattered light marks. There is some discoloration at edges where the wood meets metal. There are no chips or cracks. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has generally strong finish with minor wear. Overall, the stocks are in Fine condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent faint erosion in the bore, mostly at the muzzle-end. In this writer's opinion, the bore rates about 9 out of 10.

Overall Condition: This rifle retains about 95% of its metal finish. The finish is generally strong throughout. There is some streaking on the receiver. The left of the receiver has light wear from the saddle ring. There are a few other scattered minor marks. There are infrequent spots of minor oxidation. The action shows minor operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in about Fine condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1892 Saddle Ring Carbine made in 1905, just before the Winchester Proof mark was adopted for their centerfire rifles and shotguns. The rifle is chambered in .44-40 Winchester and has a 20" round barrel. This rifle is in Fine condition, really in quite good shape given its age of 120 years. The 1892 is a classic Winchester lever gun, making appearances in a wild array of Western movies and television shows as well as seeing extensive use all across America as a hunting and utility rifle. This rifle should be of interest to the Winchester collectors and should still be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 1892

Serial Number: 295044

Year of Manufacture: 1905

Caliber: .32 Winchester Center Fire

Action Type: Lever Action fed by Internal Tube Magazine

Markings: The top of the barrel is marked “MANUFACTURED BY WINCHESTER REPEATING ARMS CO / NEW HAVEN CONN U.S.A. PATENTED OCTOBER 14 1884 / 32 W.C.F.” The bottom of the receiver is marked “295044” The top tang is marked “MODEL 1892 WINCHESTER TRADE MARK”

Barrel Length: 24” Octagon Barrel

Sights / Optics: The front sight is a blade dovetailed into the top of the barrel. The rear sight is a buckhorn elevator sight.

Stock Configuration & Condition: 2 piece walnut stock, straight comb, steel buttplate, smooth straight grip, and a smooth fore end. The LOP is 13” from the front of the trigger to the back of the buttplate. There are only minor scratches and compression marks on the stock and fore end, with the vast majority of the original finish retained. Wood to metal fit is great. There are no chips or cracks. The stock rates in Fine condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright. The rifling is sharp. There is light scattered erosion in the bore. In this writer’s opinion the bore rates 8.5/10.

Overall Condition: This rifle retains about 98% of its metal finish. There are surface marks and signs of careful use throughout. Some of the wear has turned to an attractive patina and there is scattered freckling throughout. The screwheads are sharp. The markings are clear. Overall, this rifle is in excellent condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: A letter from the Winchester museum detailing the date of manufacture and specifications of the rifle.

Our Assessment: The Winchester Model 1892 was designed by John Browning to be a lighter version of the Model 1886 using a smaller, lighter frame. When asked by Winchester to design an improved lever action to compete with a recent Marlin offering, John Browning said he would have the prototype completed in under a month or it would be free. Within two weeks, Browning had a functioning prototype of the '92. The Model 1892 was used by several explorers on their expeditions, as well as used by the Royal Navy during WW1.

This Winchester Model 1892 was made in 1905, and still looks amazing after 120 years. This is a must have for Winchester collectors.

Make: Winchester

Model: 1892 Takedown Rifle

Serial Number: 233119

Year of Manufacture: 1903

Caliber: .32-20 WCF

Action Type: Takedown Lever Action Rifle with Side Loading Gate fed by Tubular Magazine

Barrel Length: 24”, Octagonal

Sights / Optics: The front sight is a Marble Sheard brass beaded blade dovetailed to the front of the barrel. The rear sight is a "U"-notch elevator sight dovetailed into the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped, and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches. Some of these have damaged or removed portions of the surface wood. There is a thin crack at the left-front of the wrist. There are small losses at the top-front corners of the wrist. The LOP measures 12 3/4” from the front of the trigger to the back of the buttplate. The buttplate shows treatment with cold blue, scattered light wear and some minor surface erosion. Overall, the stocks rate in about Very Good condition.

Type of Finish: Blue

Finish Originality: Original to the parts. The barrel markings are later vintage. The Winchester proof on the receiver may indicate that the barrel was replaced at the factory.

Bore Condition: The bore is mostly bright with sharp rifling. There is some light erosion at the muzzle-end. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at all edges. The barrel extension is mostly worn to white. There is handling wear on the bottom-front of the receiver. There are some scattered light nicks, scuffs and scratches including a cluster of marks on the bottom tang. There are scattered spots of minor oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition as not parts-original.

Mechanics: The action functions correctly. We did not fire this firearm. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester 1892 is essentially a Model 1886 action which was miniaturized for use with pistol caliber cartridges. Just as the 1886 would replace the 1876, the 1892 would replace the 1873. As the 1886 was designed by John Browning, it was not difficult for him to develop the 1892. After boasting to Winchester that he would have a prototype within a month, he actually had a functioning prototype in only two weeks. The Model 1892 rifle was popular with ranchers and later was the rifle of choice for western movies and TV shows, John Wayne used both M1892 rifles and carbines in many of his western movies. The M1892 rifles again became popular in the 1980s with the advent of Cowboy Action shooting, as they were smooth and dependable.

This is a Winchester Model 1892 Takedown Rifle made in 1903. The rifle is chambered in .32-20 Winchester and has a 24" octagonal barrel. The barrel markings indicate that it was produced much later than 1903, however the Winchester proof on the receiver may indicate it is a factory replacement. This rifle is in Very Good condition, retaining a strong bore, good mechanics and the majority of its metal finish. This will be a nice piece to add to your collection and should still prove to be a good shooter. Please see our photos and good luck!

Make: Winchester

Model: 94 NRA Commemorative Centennial Musket

Serial Number: NRA36944

Year of Manufacture: 1971 (January-December) Limited Quantity

Caliber: .30-30 Winchester

Action Type: Lever Action Rifle with Full-Length Tubular Magazine (7 Capacity)

Markings: The left of the barrel is marked “WINCHESTER - MODEL 94 30-30 WIN. MADE IN NEW HAVEN, CONN. U.S.A. WINCHESTER PROOF STEEL”. The right side of the barrel is marked, “NRA CENTENNIAL MUSKET”. The top of the barrel at the rear has an ovalled “WP” proof. The bottom of the receiver is marked with the serial number at the front “NRA36944”. The sides of the receiver have scroll engraving with “1871 NRA 1971”. The tang is marked, “MODEL 1894 / WINCHESTER”. The right side of the buttstock has an NRA Centennial 1871-1971 Medallion embedded in the stock.

Barrel Length: Musket: 26”

Sights / Optics: The front sight is a blade dovetailed to the barrel. The rear sight is a folding ladder sight with a fixed u-notch when down and presents a sliding u-notch when up marked 0 5 10 15 20, and is dovetailed to the slide. The left side of the receiver has a pair of drilled, tapped, and filled holes for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth wood with a banded forend, straight grip, straight comb, steel buttplate, and two sling rings front and rear. There are some compressions throughout the stocks, primarily found on the left side of the wrist. There are no chips or cracks. The LOP measures 13 1/4″ from the front of the trigger to the back of the buttplate. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is well defined. There is no erosion. In this writer’s opinion the bore rates 10/10.

Overall Condition: This rifle retains about 98% of its metal finish. There are a few scattered light marks about the metal including a few scratches on the receiver. The action shows very light operational wear. The screw heads are sharp. The markings are clear. Overall, this rifle is in about Excellent condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: There are few organizations that have helped pioneer and traverse the rugged and rough terrain of American History like the National Rifle Association. Founded in 1871 with the Rifleman in mind, to provide military training to the civilian population, the NRA helped shape the American way of life in the aftermath of the Civil War and the pioneering of the Western Frontier. The NRA helped the people take power against the hardships and dangers of the Wild West and the rapid expansion of the industrial complex that transformed society. The NRA in its day helped shape the destiny of the American Rifleman in his journey though and for liberty and freedom. It is only fitting that Winchester in 1971 was authorized by the NRA to produce a commemorative 100th Anniversary rifle that truly represented the heritage and high standard of the distinguished organization and the value of the American way of life. This NRA Centennial Model 94 Musket is patterned after the Military-style Model 1895 Winchester that was specifically designed for NRA requirements. This rifle has the unmistakable quality and performance that every marksman recognizes. No greater tribute to the American Rifleman could be offered to the sportsman of the NRA than this commemorative Centennial Model 94.

Make: Winchester

Model: 94 XTR Big Bore

Serial Number: BB029747

Year of Manufacture: 1987

Caliber: .375 Winchester

Action Type: Lever Action Rifle with Full Length Tubular Magazine

Markings: The left side of the barrel is marked “WINCHESTER ® BIG BORE MODEL 94 XTR – 375 WIN. / –MADE IN NEW HAVEN, CONN. U.S.A. WINCHESTER PROOF STEEL–”. The top rear of the barrel is marked with a circled “WP” proof. The front underside of the receiver is marked with the serial number.

Barrel Length: 20”

Sights / Optics: The front sight is a hooded beaded blade dovetailed to a serrated ramped base fixed to the barrel. The rear sight is a u-notch elevator sight dovetailed to the barrel. The left side of the receiver is drilled, tapped, and filled for a receiver sight.

Stock Configuration & Condition: The stocks are two-piece checkered walnut with banded forend, straight grip, straight comb and an orange Winchester buttpad. The checkering is sharp. There are no chips or cracks. There are a few minor compressions and scratches. The LOP measures 13 1/2” from the front of the trigger to the back of the buttpad. Overall, the stocks are in about Excellent condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore. In this writer’s opinion the bore rates 9/10.

Overall Condition: This rifle retains about 97% of its metal finish. There are scattered minor scratches on the receiver and barrel with thinning at the muzzle. The action shows light operational wear. There is intermittent oxidation. The screw heads are sharp. The markings are clear. Overall, this rifle is in about Excellent condition.

Mechanics: The action functions correctly. The trigger pull is crisp. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 94 XTR Big Bore in .375 Winchester is a robust lever-action rifle designed to offer increased power and versatility over the traditional .30-30 chambering. Introduced in the late 1970s and popular through the 1980s, the Big Bore variant addressed demands from hunters seeking greater stopping power in lever-action rifles. With its 20-inch barrel and compact handling, this rifle is well-suited for hunting in dense brush or wooded terrain, where quick shots and manageable recoil are critical. The .375 Winchester cartridge itself provides excellent performance on medium and large game at moderate ranges, making it highly favored by hunters pursuing whitetail deer, black bear, and wild hogs.

Beyond its performance capabilities, the Winchester Model 94 XTR Big Bore stands out for its classic aesthetics and durability. The rifle typically features a richly blued finish paired with checkered walnut stocks, exemplifying Winchester's commitment to craftsmanship and quality during this period. Its solid top receiver is drilled and tapped for scope mounts, providing hunters with increased accuracy options while maintaining the classic appeal of iron sights. Today, the Winchester 94 XTR Big Bore in .375 Win has become a sought-after collectible due to its unique chambering, discontinued production status, and enduring reputation as an effective hunting rifle.

Make: Winchester Repeating Arms

Model: 1894

Serial Number: 879895

Year of Manufacture: 1920

Caliber: .30-30 Winchester Center Fire (WCF)

Action Type: Takedown Lever Action Rifle with Full-Length Tubular Magazine

Barrel Length: 26"", Octagonal

Sights / Optics: The front sight is a blade dovetailed and screw-set to the barrel. The rear sight is a flat-top ""U""-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped, and filled for a tang sight (none present). The left of the receiver has been drilled and tapped with a Lyman 21 receiver sight installed, adjustable for windage and elevation. There are additional drilled, tapped and filled holes under the sight arm, presumably for an optic mount (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight grip and comb, and a smooth steel crescent buttplate. The stocks have some small nicks and light scratches. There are no chips or cracks. The LOP measures 13"" from the front of the trigger to the back of the buttplate. The plate has some light marks and spots of minor oxidation. Overall, the stocks are in Very Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is scattered minor erosion in the bore. In this writer’s opinion, the bore rates 8+ out of 10.

Overall Condition: This rifle retains about 92% of its metal finish. The finish is thinning at some edges. The most notable finish loss is on the barrel extension. There is wear on the barrel and magazine from disassembly/reassembly. There are some other scattered minor nick and small scratches. There is infrequent minor oxidation, most notable on the right of the trigger guard. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good-plus condition.

Mechanics: The action functions correctly. The hammer has a half-cock safety. The rifle is equipped with a lever safety, which is operational. The lever lock-ups properly and the trigger is crisp. We did not fire this rifle. As with all previously owned firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None

Our Assessment: The Model 1894 was another Winchester lever action rifle designed by gunmaking genius John Moses Browning, and it became one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7 million units, and was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Winchester Center Fire rounds, but by August 1895 Winchester had developed a different steel composition that could handle higher pressures, and the .25-35 and .30-30 WCF chamberings were introduced. As R.L. Wilson relates in his reference book ""Winchester An American Legend"", Winchester’s announcement of the Model 1894 in their November 1894 catalog certainly proved prophetic: ""We believe that no repeating rifle system ever made will appeal to the eye and understanding of the riflemen as this will and that use will continue to warrant first impressions.""

This Winchester Model 1894 Lever Action Rifle in .30 WCF was made in 1920 and is in Very Good condition. It features a 26"" octagonal barrel, 92% of its original blued finish, two-piece smooth walnut stocks, a mostly bright bore with sharp rifling, and is a scarce takedown model. The .30-30 WCF is one of, if not the most popular deer hunting cartridges in America and the 1894 is the classic rifle for this round. This is a wonderful old Model 1894 Rifle, and would be a fine addition to any Winchester collection.

Make: Winchester

Model: 1894

Serial Number: 827177

Year of Manufacture: 1918

Caliber: .30-30 Winchester (WCF)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 20", Octagonal

Sights / Optics: The front sight is a blade dovetailed and screw-set to the front of the barrel. The rear sight is a flat-top "U"-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and smooth steel shotgun-style buttplate. The forend has a custom diamond-pattern hand-carved on each side. The stocks have some scattered nicks, dings, scuffs and scratches. There is a short, thin crack at the left-front edge of the forend. The LOP measures 13 1/8" from the front of the trigger to the back of the buttplate. The plate has worn to white with some scattered minor oxidation, nicks and small scratches. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is minor erosion scattered through the bore. In this writer's opinion, the bore rates 7+ out of 10.

Overall Condition: This rifle retains about 65% of its metal finish. The finish is thinning at all edges. Most of the balance is in the receiver and nosecap which have mostly worn to white or gone to a light patina. The receiver has some scattered light nicks and scratches. The barrel and magazine tube have generally strong finish with some light nicks and small scratches, mostly in the magazine. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 made in 1918, chambered in .30-30 Winchester. The .30-30 Winchester paired with the Model 1894 is nearly synonymous with "deer rifle" in America and a classic rifle to add to any collection. This example is in a less common configuration with a 20" octagonal barrel and a shotgun-style buttplate. Records for this serial range are not available, so we cannot be sure this is the factory configuration, but it makes for a handsome "short-rifle" that will display well in a Winchester collection. With its good bore and strong mechanics, it should also still make for a good shooter. Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 1894 "Eastern" Carbine

Serial Number: 607282

Year of Manufacture: 1912

Caliber: .32-40 Winchester

Action Type: This rifle has a lever action with a half-length tubular magazine.

Barrel Length: 20"

Sights / Optics: The front sight is a blade pinned to a slotted base fixed to the front of the barrel. The rear sight has been removed with a blank installed in the dovetail at the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present). The left of the receiver has been drilled and tapped with a Lyman 21 receiver sight installed, adjustable for windage and elevation.

Stock Configuration & Condition: The stocks are 2-piece checkered deluxe walnut with banded forend, straight grip, straight comb and checkered black hard rubber Winchester buttplate. The stocks have a few scattered light marks with a couple of more notable dings in the bottom of the forend. There is a tiny loss at the top-front corner of the wrist on the right. The checkering is well defined, likely re-cut or chased. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has scattered residue from the stocks' new finish with well defined checkering. Overall, the stocks are in Very Good-plus condition as refinished and/or not original to the gun.

Type of Finish: Blue, Case Color Lever & Hammer

Finish Originality: Refinished

Bore Condition: The bore is semi-bright with sharp rifling. There is some scattered light erosion in the bore. In this writer's opinion, the bore rates 7+ out of 10.

Overall Condition: This rifle retains about 96% of its current metal finish. The finish is generally strong throughout. The barrel's finish has a slight plum hue with some wear at the muzzle. There is infrequent faint erosion under the finish. The action shows light operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good-Fine condition as refinished.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name "Winchester" synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 carbine made in 1912 with a 20" round barrel and chambered in .32-40. As a pre-1932 Carbine without a saddle ring, collectors would call it an "Eastern" carbine, suggesting that in the early 1900s Eastern customers would transport their rifles in carts or new-fangled automobiles while Western customers would transport them on horses. The rifle has been refinished, so it looks great for its age, epecially with its checkered deluxe walnut stocks. It has a half-length magazine, giving it nice balance, and it has been equipped with a vintage Lyman receiver sight. The result is an attractive rifle that will display well in a collect

Make: Winchester

Model: 1894

Serial Number: 545254

Year of Manufacture: 1910

Caliber: .30-30 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Round

Sights / Optics: The front sight is a white beaded blade dovetailed to the front of the barrel. The rear sight is a custom fixed sight with an aperture formed of a large "U"-notch with a flat top. The sights are not original to the gun. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches, most notable on the right of the buttstock. There is a crack at the bottom-front of the forend. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered oxidation and erosion. Overall, the stocks are in Good-plus condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is dark. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 3% of its metal finish. There is infrequent finish in well protected areas. Most surfaces have worn to white or gone to a patina. There is fairly evenly scattered surface oxidation and minor erosion. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings range from clear to worn or obscured by oxidation. Overall, this rifle is in about Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 94 Rifle in .30-30 WCF that was made in 1910. The .30-30 is synonymous with "deer rifle" in the United States and the 1894 is perhaps the most common platform for the cartridge. The rifle is in Good condition with 3% of its metal finish remaining, a fair bore, and strong mechanics. It has a half-length "button" magazine, giving it a little lighter weight and faster swing. The rifle appears to have seen its share of use over the last 115 years, but will display well with its "been there, done that" appearance. It would also be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 520245

Year of Manufacture: 1910

Caliber: .30-30 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: The barrel has been cut to 22 1/2".

Sights / Optics: The front sight is a Marble 45W brass beaded blade dovetailed to the front of the barrel. The rear sight is a Marble folding "U"-notch sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation and can be reversed to present a "V"-notch. The top tang is drilled and tapped for a tang sight (none present). The stock mounting screw in the top tang appears to be a mounting screw for a tang sight, it is not the original stock mounting screw. The sights are not original to the rifle.

Stock Configuration & Condition: The stocks are two-piece checkered walnut with capped forend, capped pistol grip, straight comb, and checkered steel shotgun-style buttplate. The stocks have scattered nicks, dings, bruises and scratches. There is a crack at the heel. There are some tiny losses and discoloration around the edges of the top tang. There are a few open grain-lines. The checkering ranges from well defined to worn smooth. The LOP measures 13 1/8" from the front of the trigger to the back of the buttplate. The plate has worn to white with infrequent minor erosion and oxidation; the checkering is well defined. Overall, the stocks are in Good-plus condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 75% of its metal finish. The finish is thinning at all edges. Most of the balance is handling wear in the bottom-front of the receiver. The nosecap is worn to white. The trigger and lever's case color has mostly muted. There is light wear and minor oxidation in the top tang from a previously installed peep sight. There is some other scattered more minor wear. There are scattered nicks, scuffs and scratches. There are scattered spots of minor oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition as customized.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 94 Rifle in .30-30 WCF that was made in 1910. The .30-30 is synonymous with "deer rifle" in the United States and the 1894 is perhaps the most common platform for the cartridge. The rifle is in Very Good condition with 75% of its metal finish remaining, a decent bore, and strong mechanics. Its round barrel has been cut back to 22 1/2" and it has a number of interesting features. The barrel is a half-round, half-octagon profile, it has a half-length or "button" magazine, its refinished walnut stocks are checkered with a capped pistol grip and a checkered steel shotgun-style buttplate. This suite of features will allow some collectors to overlook the modification to the barrel and after-market sights. The rifle has seen honest use, but it looks better than any of us will when we're 115 years old! Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 503219

Year of Manufacture: 1909

Caliber: .30-30 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Round

Sights / Optics: The front sight is a german silver blade in a slotted base, dovetailed and screw-set to the front of the barrel. The rear sight is a Winchester Express sight with three folding "V"-notches in a base dovetailed to the rear of the barrel. The notches are marked 50, 1 and 2. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There are small voids in the finish along the left of the buttstock and some crazing on the right. There are short, thin cracks at the right-rear of the top and bottom tangs. There are a few tiny losses around the edges of the tangs. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with some scattered light oxidation. Overall, the stocks are in Good-plus condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is light erosion scattered through the bore with some minor pitting. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. Most of the balance is scattered finish wear in the receiver. There is some other scattered wear along the barrel and magazine. There are some patches of surface erosion on the top of the barrel behind the front sight. The magazine tube has an odd 4" long zig-zag scratch on the top-left and there is a shallow dent on the bottom about 3" behind the mounting bracket. Some worn areas show discoloration from oxidation. There are scattered nicks, scuffs and scratches. The action shows operational wear. Most screw heads range from sharp to tool marked with strong slots, the stock mounting screw is disfigured with a questionably usable slot. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 94 Rifle in .30-30 WCF that was made in 1910. The .30-30 is synonymous with "deer rifle" in the United States and the 1894 is perhaps the most common platform for the cartridge. The rifle is in Good condition with 60% of its metal finish remaining, a fair bore, and strong mechanics. The rifle has seen honest use, but it looks better than any of us will when we're 115 years old! It may still prove to be a decent hunting rifle and will add nicely to a Winchester collection missing the 1894. Please see our photos and good luck!

Make: Winchester

Model: 1894 Saddle Ring Carbine

Serial Number: 484113

Year of Manufacture: 1909

Caliber: .25-35 WCF

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 20", Round

Sights / Optics: The front sight is a white beaded blade pinned to a slotted base fixed to the barrel behind the front band. The rear sight has been removed with a blank installed in the dovetail. The top tang is drilled and tapped for a tang sight (none present). The left of the receiver has been drilled and tapped with a Lyman 66A receiver sight installed.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb, and steel carbine-style buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There is some cracking around the rear of the buttstock. The LOP measures 13 1/8" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white or gone to a light patina with some finish in the face and light erosion at the heel and toe. Overall, the stocks are in Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is erosion and minor pitting scattered through the bore, mostly in the grooves. In this writer's opinion, the bore rates about 6 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. The receiver is mostly worn to white with some finish around the receiver sight and saddle ring mount (the ring is missing). There is wear on the left of the receiver from the previously installed saddle ring. The barrel and magazine have scattered light wear. There is some minor oxidation in the worn areas with some erosion at the front of the receiver on each side. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1894 Saddle Ring Carbine in .25-35 WCF that was made in 1909. The cartridge is based on the .30-30, perhaps the most popular deer cartridge in America, but necked-down to .25 caliber, giving it a little more velocity with lighter projectiles. This rifle is in Good condition with 60% of its metal finish remaining, a fair bore and strong mechanics. The stocks have scattered wear and have been refinished. As a pre-64 example of the 1894 Saddle Ring Carbine, it would be a neat addition to a Winchester collection. It would also be well worth restoring to take back out in the field. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 480033

Year of Manufacture: 1909

Caliber: .30-30 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Round

Sights / Optics: The front sight is a Marble 47 brass-beaded blade dovetailed to the front of the barrel. The rear sight is a Marble's "U"-notch elevator sight with white diamond aiming reference dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation and can be reversed to present a "V"-notch. The top tang is drilled, tapped and filled for a tang sight (none present). The barrel has a pair of drilled and tapped holes just in front of the forend.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There are five notches in the bottom-front of the forend that appear intentionally applied. There is a tiny loss at the top-front corner of the wrist on the right. There is some discoloration around the wrist including a bruise on the left. There are no cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered oxidation and erosion. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original to the parts. The ovalled "P" marking on the barrel indicates that it was replaced outside the factory. The magazine is also likely a replacement.

Bore Condition: The bore is mostly bright with sharp rifling. There is no erosion in the bore, but there is a little stubborn copper fouling. In this writer's opinion, the bore rates 9 out of 10.

Overall Condition: This rifle retains about 75% of its metal finish. The balance is mostly in the receiver which has gone to a patina mottled with areas worn to white. The magazine and barrel have generally strong finish with a few light marks. There is light wear and minor oxidation around the mounting holes on the barrel from a previously installed sight/optic mount. There are some spots of oxidation on the magazine. There are some nicks and scratches, mostly on the receiver. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in Very Good condition as not parts-original.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 94 Rifle in .30-30 WCF that was made in 1910. The .30-30 is synonymous with "deer rifle" in the United States and the 1894 is perhaps the most common platform for the cartridge. The rifle is in Very Good condition with 75% of its metal finish remaining, a good bore in its replacement barrel, and strong mechanics. The rifle has likely seen its share of use and, with its new barrel, it should still prove to be a good hunting rifle. It will also add nicely to a Winchester collection missing the 1894. Please see our photos and good luck!

Make: Winchester

Model: Winchester Centennial '66, Model 1894

Serial Number: 47389

Year of Manufacture: 1966

Caliber: .30-30 Winchester

Action Type: Top Ejecting Lever Action with Full Length Tubular Magazine

Barrel Length: 26”, Octagonal

Sights / Optics: The front sight is a tall blade dovetailed to the front of the barrel. The rear sight is a "U"-notch leaf and elevator sight dovetailed to the rear of the barrel with the notch fine-adjustable for elevation. The left-rear of the receiver is drilled, tapped and filled for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth wood with a gold-capped forend, straight grip, straight comb and brass crescent buttplate. There are some scattered light nicks, scuffs and scratches. There are no chips or cracks. The LOP measures 13 1/2” from the front of the trigger to the back of the buttplate. The plate has some discoloration. Overall, the stocks rate in Very Good-plus condition.

Type of Finish: Blue & Gold

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is no erosion in the bore, but there is a little stubborn fouling. In this writer's opinion, the bore rates 9 out of 10.

Overall Condition: This rifle retains about 90% of its metal finish. The finish is thinning at some edges, most notable on the receiver. The blued finish is generally strong throughout with some minor nicks and small scratches. There is wear in the gold finish, most notable on the nosecap and the left receiver flat. There is some minor erosion in the wear on the left of the receiver. The action shows minor operational wear. The screw heads are sharp. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Centennial '66, produced in 1966 to commemorate the 100th anniversary of Winchester's first rifle, the Model 1866. The rifle itself is a Model 94 with a gold-plated receiver and forend cap, 26" octagonal barrel and saddle ring. The gold plating of the receiver harkens back to the Model 1866 which had a brass receiver, and this is a beautiful rifle to commemorate the gun that started it all! The rifle is in Very Good condition with some wear in the gold finish, a few minor marks, a strong bore and great mechanics. This would make a good addition to a Winchester collection, or just a beautiful rifle to take out to the range. Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 1894 Takedown Rifle

Serial Number: 451567

Year of Manufacture: 1908

Caliber: .32 Winchester Special

Action Type: This rifle has a takedown lever action with a full-length tubular magazine.

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a Marble No. 5 brass beaded blade dovetailed to the front of the barrel. The rear sight is a Winchester Special Smokeless "V"-notch sight adjustable for elevation dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are 2-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate. The stocks have some scattered light nicks, scuffs, scratches and a few small dings. There is some dark discoloration, mostly at edges that meet metal. There is a tiny crack at the right-front edge of the wrist. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered spots of minor oxidation, nicks and scratches. Overall, the stocks are in Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray. The rifling shows wear, but is generally well defined. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates about 5 out of 10.

Overall Condition: This rifle retains about 50% of its metal finish. The finish is thinning at all edges. Most of the balance is in the receiver and barrel extension which have worn to white. The barrel has some scattered finish wear, mostly around the sights. The magazine has more notable finish wear with the worn areas going to a light patina. There is wear on the magazine from disassembly/assembly. There are scattered light nicks, scuffs and scratches. There is some minor oxidation, mostly in the worn areas. There is some stubborn dried grease. There is residue built up in the seam between the receiver and barrel assembly. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are generally clear, the barrel address is poorly struck. Overall, this rifle is in Good condition.

Mechanics: We were not able to remove the barrel assembly from the receiver, it is likely that the seam will need to soak with some solvent or penetrating oil. Otherwise, the action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 94 Takedown Rifle in .32 Winchester Special made in 1908. The cartridge is based on the .30-30, perhaps the most popular deer cartridge in America, but necked-up to .32 caliber, giving it a little more power. This rifle is in Good condition with 50% of its metal finish remaining, a fair bore and strong mechanics. There is some residue built up in the seam between the receiver and barrel that appears to be preventing removal of the barrel assembly. This pre-1964 vintage rifle should be of interest to collectors, especially in the Takedown configuration and with its Special Smokeless rear sight. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 439510

Year of Manufacture: 1908

Caliber: .30-30 Winchester (.30 WCF)

Action Type: Tubular Magazine Fed Takedown Lever Action Rifle

Barrel Length: 26"", Octagonal

Sights / Optics: The front sight is a blade dovetailed and screw-set to the front of the barrel. The rear sight is a ""V""-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece checkered deluxe carved walnut with capped forend, capped pistol grip, straight comb and checkered black hard rubber shotgun-style Winchester buttplate. The stocks have scattered nicks, scuffs and scratches. There is some crazing and finish loss. There are a few tiny losses around edges. The forend has slight gaps at the receiver and nosecap. The checkering is generally well defined. The LOP measures 13 1/4"" from the front of the trigger to the back of the buttplate. The plate has some light wear with well defined checkering and lettering. Overall, the stocks are in Very Good condition.

Type of Finish: Blue, Casehardened Lever & Hammer

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is light erosion and minor pitting scattered through the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 85% of its metal finish. The finish is thinning at all edges. The barrel and magazine have generally strong finish with scattered minor oxidation and some wear from disassembly/reassembly. There is wear around the barrel extension and the receiver at the bottom-front. The bolt has some wear on the top-front. There is some other scattered light wear. Worn areas show discoloration from oxidation. There are some light nicks, scuffs and scratches. The lever and hammer have mostly muted. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. This rifle has lever and half-cock hammer safeties. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Model 1894 was another Winchester lever action rifle designed by John Moses Browning. It became one of the most famous and popular hunting rifles of all time, the first commercial sporting rifle to sell over 7 million units. As R.L. Wilson relates in his reference book “Winchester An American Legend”, Winchester’s announcement of the Model 1894 in their November 1894 catalog certainly proved prophetic: “We believe that no repeating rifle system ever made will appeal to the eye and understanding of the riflemen as this will and that use will continue to warrant first impressions.”

This Winchester Model 1894 Lever Action Rifle in .30 WCF was made in 1908 and is in Very Good condition. It features a 26” octagonal barrel, 85% of its original blued finish, and elegant two-piece checkered and carved deluxe walnut stocks with a capped pistol grip. While factory records are not available for this serial range, there is nothing overt to indicate that the rifle is not factory original with matching assembly number ""7150"" on the lower tang and stock inlet. In addition to being a takedown with deluxe checkered stocks, it is engraved in the A. pattern with attractive scroll and border surrounding a Ram panel scene on the left receiver flat and a Buck panel on the right. This rifle checks a lot of boxes for the collector, a beautiful example of an early 20th Century 1894, and will be a wonderful addition to any collection.

Make: Winchester

Model: 1894

Serial Number: 397382

Year of Manufacture: 1907

Caliber: .38-55 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Round

Sights / Optics: The front sight is a Lyman folding Beach-style sight, presenting either a white beaded post or a hooded, beaded post. The rear sight is a "V"-notch sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation, but the sight has been altered to flat-top, possibly reducing adjustment range. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, scuffs and scratches. There are more notable dings on the right of the forend and the right-rear of the buttstock. There is a tiny loss at the top-front corner of the wrist on the left. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered minor erosion and oxidation. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. Most of the balance is finish wear in the receiver. The nosecap is worn to white. There is some other scattered more minor wear along the barrel and magazine. There is some minor oxidation and erosion, most notable at the rear of the receiver and in the top tang. There are scattered nicks, scuffs and scratches. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1894 Rifle in .38-55 WCF that was made in 1907. The .38-55 is one of the original chamberings for this model. It still has a fairly devoted following among black powder cartridge shooters, but was quickly surpassed by new smokeless chamberings. The rifle is in Good condition with 60% of its metal finish remaining, a decent bore, and strong mechanics. The rifle has seen honest use, but it looks better than any of us will when we're coming up on 120 years old! Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 388279

Year of Manufacture: 1907

Caliber: .30-30 Winchester (WCF)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a Marble No. 3 reversible sight with a blade that can present either a white or a brass bead (requires removing the sight from the dovetail to reverse). The Lyman rear sight is has two folding leaves, one with a "V"-notch and the other with a white triangle aiming reference with no notch, dovetailed to the rear of the barrel. The top tang is drilled and tapped with a Marble folding tang sight installed, adjustable for elevation. The sights are not original to the gun.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, scuffs and scratches. There are a few more notable dings. There is discoloration in the wrist, mostly around the edges of the tangs. There is a small crack at the bottom-front corner of the wrist on the right. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white or gone to a patina with some scattered oxidation and erosion. Overall, the stocks are in Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray. The rifling is worn, but generally well defined. There is erosion and light pitting scattered through the bore. In this writer's opinion, the bore rates about 5 out of 10.

Overall Condition: This rifle retains about 65% of its metal finish. The finish is thinning at all edges. The receiver has mostly worn to white or gone to a light patina with some finish in well protected areas. The case color on the hammer and lever have mostly muted, but there is a little bit of good color. There is some wear on the top of the barrel from a previously installed rear sight and infrequent other scattered wear. There are some light nicks, scuffs and scratches. There are some scattered spots of oxidation, most notable on the receiver. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 rifle made in 1907 with a 26” octagonal barrel chambered in .30-30 Winchester. The .30-30 Winchester paired with the Model 1894 is nearly synonymous with "deer rifle" in America and a classic rifle to add to any collection. This example is in Good condition, retaining the majority of its original metal finish, a fair bore, and strong mechanics. The rifle has been equipped with a nice variety of vintage Marble's and Lyman sights. It would make a neat addition to a Winchester collection and may still prove to be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 359517

Year of Manufacture: 1906

Caliber: .32 Winchester Special

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a Marble 41W brass-beaded blade dovetailed to the front of the barrel. The rear sight is a Marble's "V"-notch elevator sight with a white diamond aiming reference; the notch is fine-adjustable for elevation and can be reversed to present a "U"-notch. The sights are not original to the gun. The top tang is drilled, tapped and filled for a tang sight (none present); an additional hole has been drilled, tapped and filled in front of the stock mounting screw.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, dings, scuffs and scratches, most notable in the left of the forend. There is handling wear in the grip areas. There is some crazing in the buttstock's finish, mostly around the bottom tang. There are no chips or cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with some scattered light oxidation and minor erosion. Overall, the stocks are in Good-Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray. The rifling is worn, but visible. There is light erosion and minor pitting scattered through the bore. In this writer's opinion, the bore rates about 5 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. The receiver and nosecap are mostly worn to white or gone to a light patina. The case color on the hammer and trigger have mostly muted. There is some scattered light wear on the barrel and magazine tube. There is some minor surface oxidation, mostly in the worn areas. There is infrequent minor surface erosion. There are some light nicks and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are generally clear, the top tang marking is interrupted by the added tang sight screw-hole. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 rifle made in 1906 with a 26” octagonal barrel and chambered in .32 Winchester Special. The .32 W.S. is a necked-up .30-30, allowing the use of heavier projectiles. This made the cartridge popular for hunters who expected to encounter larger deer, black bear, or who were hunting in brush. This is a classic Winchester that will make a neat addition to a collection missing the 1894 and would be a good candidate to restore and get back out in the field. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 321412

Year of Manufacture: 1906

Caliber: .30-30 Winchester (.30 WCF)

Action Type: Tubular Magazine Fed Takedown Lever Action Rifle

Barrel Length: 26", Half-Round, Half-Octagon

Sights / Optics: The front sight is a Lyman folding Beach-style sight presenting either a short post or a hooded, beaded post, dovetailed to the front of the barrel. The rear sight is a "Sporting rear" "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled and tapped with a folding Lyman tang sight installed, adjustable for elevation. An additional hole has been drilled and tapped in the top tang between the stock and sight mounting holes, it is covered by the sight when installed.

Stock Configuration & Condition: The stocks are two-piece checkered deluxe walnut with capped forend, capped pistol grip, straight comb and steel crescent buttplate. The rear face of the buttstock, the inside of the buttplate and the left of the bottom tang are each stamped with asssembly number "1986". The stocks have scattered light nicks, scuffs and scratches with some more notable scraping on the left of the forend behind the checkering. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has mostly muted with infrequent oxidation and some light scratching. Overall, the stocks are in Very Good condition.

Type of Finish: Blue, Casehardened Lever & Hammer

Finish Originality: Original

Bore Condition: The bore is semi-bright and the rifling is sharp. There is scattered light erosion in the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 85% of its metal finish. The finish is thinning at all edges. The barrel and magazine have generally strong finish with scattered minor oxidation. There is wear around the barrel extension and the receiver at the bottom-front. There is some other scattered light wear. There are some light nicks, scuffs and scratches. The lever and hammer have some muting with other areas showing strong color. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. This rifle has lever and half-cock hammer safeties. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Winchester Factory Records letter indicating the rifle's serial number was applied October 18, 1906 and was assembled as a .30 caliber, 1/2 Octagon barrel, plain trigger, checkered stock, pistol grip, sporting rear sight, takedown with $2.00 engraving, received in warehouse January 2 and shipped January 7, 1907 on order 86786.

Our Assessment: The Model 1894 was another Winchester lever action rifle designed by John Moses Browning. It became one of the most famous and popular hunting rifles of all time, the first commercial sporting rifle to sell over 7 million units. As R.L. Wilson relates in his reference book “Winchester An American Legend”, Winchester’s announcement of the Model 1894 in their November 1894 catalog certainly proved prophetic: “We believe that no repeating rifle system ever made will appeal to the eye and understanding of the riflemen as this will and that use will continue to warrant first impressions.”

This Winchester Model 1894 Lever Action Rifle in .30 WCF was made in 1906 and is in Very Good condition. It features a 26” half-round, half-octagonal barrel, 85% of its original blued finish, elegant two-piece checkered deluxe walnut stocks with a capped pistol grip, and a semi-bright bore with sharp rifling. The included Winchester Factory Records letter confirms its configuration, and it is quite the find for the dedicated collector. In addition to being a takedown with a half-octagon barrel and deluxe checkered stocks, it is factory engraved. The pattern is closest to the No. 10 pattern as it would later be standardized with attractive scroll and border surrounding a stag panel scene on the left receiver flat. This rifle checks a lot of boxes for the collector, a beautiful example of an early 20th Century 1894, and will be a wonderful addition to any collection.

Make: Winchester

Model: 94 AE (Angle Eject)

Serial Number: 6345072

Year of Manufacture: Late 1990s

Caliber: .30-30 Winchester

Action Type: Lever-Action, Fed by Tubular Magazine

Markings: The left side of the barrel is marked “WINCHESTER MODEL 94AE CAL. 30-30 WIN. / MADE IN NEW HAVEN, CONN. U.S.A. – WINCHESTER PROOF STEEL”. The top of the barrel at the rear also shows the “WP” proof. The serial number “6345072” is located on the bottom front of the receiver.

Barrel Length: 20”

Sights / Optics: The front sight is a hooded brass beaded blade on a serrated ramped base. The rear sight is a semi-buckhorn leaf with ramp dovetailed to the barrel. The receiver is drilled and tapped for scope mounting.

Stock Configuration & Condition: The stocks are two-piece checkered walnut with a straight grip, straight comb and a checkered black hard rubber Winchester buttplate. The wood shows only faint handling marks. There is no cracking or splitting. The LOP measures 13 1/2” from the front of the trigger to the back of the buttplate. The stocks rate in about Excellent overall condition.

Magazine Quantity & Condition: tubular magazine in Excellent condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright, the rifling is sharp. There is no visible erosion in the bore. In this writer’s opinion, the bore rates 9/10.

Overall Condition: This rifle retains about 98% of its original metal finish. The balance of the finish shows only the lightest signs of handling and storage. There is some faint operational wear on the lever and very faint marks near the loading gate. The screw heads are sharp. The pins are unmarred. The markings are crisp and sharp. Overall, this rifle rates in about Excellent condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Winchester Model 94 is one of the most celebrated American sporting rifles ever made. From its introduction in 1894 to the end of U.S. production, it was a favorite of ranchers, hunters, and collectors. The Angle Eject (AE) variant modernized the platform by allowing over-the-receiver scope mounting, a key feature for those wanting to pair this classic design with optics.

This particular example was manufactured in the late 1990s and features the proven .30-30 Winchester chambering, ideal for brush hunting and medium game. The 20” barrel makes it fast-handling, while the high condition level ensures it will be equally at home in a collection or the field.

With 98% original finish, excellent walnut stocks, and a mirror-bright bore, this rifle is a testament to the enduring quality of Winchester craftsmanship. Whether you’re a collector looking for a clean AE-era 94 or a shooter who appreciates classic lever-action performance, this one won’t disappoint.

Make: Winchester

Model: 1894

Serial Number: 242571

Year of Manufacture: 1902

Caliber: .32-40 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Round

Sights / Optics: The front sight is a Lyman folding Beach-style sight, presenting either a white beaded post or a hooded, beaded post. The rear sight is a Winchester Express sight with three folding "V"-notches in a base dovetailed to the rear of the barrel. The notches are marked 50, 1 and 2. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, scuffs and scratches with a few more notable dings. There are no chips or cracks. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The plate has worn to white with some light erosion at the heel and toe. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is scattered light erosion. There is a bulge in the bore about 3" from the muzzle. In this writer's opinion, the bore rates about 5 out of 10 and would rate higher but for the bulge.

Overall Condition: This rifle retains about 75% of its metal finish. The finish is thinning at all edges. Most of the balance is scattered finish wear in the receiver. There is some other scattered more minor wear along the barrel and magazine including a line of wear on the top of the barrel from a previously installed elevator sight. There is some minor oxidation, mostly in the worn areas of the receiver. There are scattered light nicks, scuffs and scratches. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Good condition (see Mechanics).

Mechanics: The hammer will fall from half-cock when the trigger is pressed. Otherwise, the action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1894 Rifle in .32-40 WCF that was made in 1902. The .32-40 is one of the original chamberings for this model. It still has a fairly devoted following among black powder cartridge shooters, but was quickly surpassed by new smokeless chamberings. The rifle is in Good condition with 75% of its metal finish remaining, a decent bore apart from a bulge 3" from the muzzle, and generally strong mechanics, though the hammer will fall from half-cock. The rifle has seen honest use, but it looks better than any of us will when we're more than 120 years old! Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 1894 Takedown Rifle

Serial Number: 210547

Year of Manufacture: Ca. 1902

Caliber: .30-30 Winchester (WCF)

Action Type: This rifle has a takedown lever action with a full-length tubular magazine.

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed and screw-set to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are 2-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate. The stocks have scattered nicks, scuffs, scratches. There are more notable scratches in the top of the wrist between the tang and comb and on the left below the front of the comb. There are some areas of discoloration, mostly in the right of the buttstock. There are tiny losses at the top-front corners of the wrist. There are no cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered spots of minor oxidation, nicks and scratches, and some spots of surface erosion at the heel and toe. Overall, the stocks are in Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray. The rifling shows wear, but is generally well defined. There is light erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 30% of its metal finish. The finish is thinning at all edges. Strongest remaining finish is in the magazine tube and the bottom flats of the barrel. There is some other finish, mostly in protected areas or around raised features. Most surfaces have gone to a light patina with some areas worn to white. There is wear on the magazine from disassembly/assembly. There are scattered light nicks, scuffs and scratches. There is some scattered light surface oxidation. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

Not only was it a success, but as of 1983 it held the record for the best-selling center-fire rifle in U.S. history. 5,103,249 Winchester 1894’s and 94’s were produced from 1894 to 1983 alone and it didn’t stop there. From 1984 to 1997, the Model 94 angle eject was introduced and in 2003 the iconic rifle was offered as a .410 shotgun. U.S. production ceased in 2006. At the time there were 14 versions of the Model 94 in the Winchester catalog. In 2010 Winchester Repeating Arms reintroduced the model 94 in two Limited Edition models to commemorate the 200th anniversary of Oliver F. Winchester's birth in New England in 1810.

This is a Model 1894 Takedown rifle made right at the turn of the century. It has a 26” octagonal barrel chambered in .30-30 WCF. It functions well and has an Old West appearance and will fit right in to a Winchester or lever action rifle collection. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 154386

Year of Manufacture: 1902

Caliber: .30-30 Winchester (WCF)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Half-Octagon, Half-Round

Sights / Optics: The front sight is a beaded blade dovetailed to the front of the barrel. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel, altered to a flat-top profile. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, scuffs and scratches. The buttstock has gaps at the front of the wrist. The wood is generally shy to the metal. The buttstock is not original to the gun. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered light oxidation and minor erosion. Overall, the stocks are in about Good condition as refinished and/or replaced.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is dark. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 4 out of 10.

Overall Condition: This rifle retains about 2% of its metal finish. Very little finish remains in well protected areas. The surfaces have worn to white or gone to a light patina. The tip of the hammer spur has broken off. There is scattered surface oxidation and light erosion. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with questionably usable slots. The markings range from clear to worn, but legible. Overall, this rifle is in about Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Cody Firearms Records Office records check which confirms this rifle's serial was applied August 20, 1902, it was produced with a 1/2 Octagon barrel, 1/2 magazine and a shotgun butt with a rubber plate (replaced), received in warehouse September 19, 1902 and shipped September 22, 1902 on order T102464.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 rifle made in 1902 with a 26” octagonal barrel chambered in .30-30 Winchester. The .30-30 Winchester paired with the Model 1894 is nearly synonymous with "deer rifle" in America and a classic rifle to add to any collection. This example was produced with some special order features including a half-octagon barrel, half-length "button" magazine, and a shotgun-style buttstock, though the buttstock has since been replaced. The rifle is in about Good condition, retaining little original metal finish, a fair bore, and strong mechanics. It would make a neat addition to a Winchester collection and would be a good candidate for restoration. Please see our photos and good luck!

Make: Winchester

Model: 94 Carbine

Serial Number: 1529033

Year of Manufacture: 1949

Caliber: .30-30 Winchester (WCF)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 20", Round

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base forged to the front of the barrel. The base is grooved for a hood that is not present. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb, and checkered steel buttplate. There is a hole in the belly for a sling stud that is not present, there is no provision for a forward sling mount. The stocks have some light nicks, scuffs and scratches. There is a crack at the right-rear of the buttstock near the heel. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has wear around the edges, some oxidation in the face, and well defined checkering. Overall, the stocks are in about Very Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is minor erosion, mostly at the muzzle-end. In this writer's opinion, the bore rates 8+ out of 10.

Overall Condition: This rifle retains about 30% of its metal finish. There is fairly evenly scattered wear with most finish in protected areas or around raised features. There is residue around the edges of the wood from the stocks' new finish. There are scattered light nicks, scuffs and scratches with infrequent minor oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-plus condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1894 Carbine, made in 1949 with a 20” round barrel chambered in .30-30 Winchester. The 30-30 Win. has likely taken more deer in America than any other cartridge except maybe .30-06 and the model 1894, or simply 94 as it is now known, is one of the most popular rifles ever chambered for the round. This rifle was made in the period with what is known as the "flat-band", due to the profile of the forward barrel band. It is in Good condition retaining a strong bore and mechanics. It would be perfect for throwing in the back window of your pick-up truck for use on coyotes and other varmints and it would also be a great deer rifle today just as it was when it was made. Being both a "flat-band" and pre-1964 production, it may also interest the Winchester collectors. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 141372

Year of Manufacture: Ca. 1901

Caliber: .25-35 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed and screw-set to the front of the barrel. The rear sight is a Winchester Express sight with three folding "V"-notches in a base dovetailed to the rear of the barrel; each notch has a vertical platinum aiming reference. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have some scattered light nicks, scuffs and scratches with a few more notable marks. There are no chips or cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with some scattered light oxidation. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is light erosion scattered through the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 50% of its metal finish. The finish is thinning at all edges. The receiver and nosecap are mostly worn to white. The case color on the hammer and trigger have mostly muted. There is some scattered light wear on the barrel. The magazine tube has some wear along the bottom, more notable toward the nosecap. There is some minor surface oxidation, mostly in the worn areas. There are some light nicks and scratches. The action shows operational wear. The screw heads are generally sharp, the tang sight fill-screw is disfigured with a usable slot. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 rifle made in 1901 with a 26” octagonal barrel and chambered in .25-35 WCF. The .25-35 WCF is a necked-down .30-30 which can use a range of projectiles from about 60-120 grains giving a muzzle velocity ranging from about 2,000-3,000 feet per second depending on projectile and powder charge. This makes it a nice rifle for smaller game and has been a popular cartridge for coyote. Whether you’re looking to add a Winchester to a collection or looking for a varmint rifle, you can’t go wrong with an American classic. Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 1894 Takedown Rifle

Serial Number: 139953

Year of Manufacture: Ca. 1901

Caliber: .30-30 Winchester (WCF)

Action Type: This rifle has a takedown lever action with a full-length tubular magazine.

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed and screw-set to the front of the barrel. The rear sight is a Winchester Express sight with folding "V"-notches dovetailed to the barrel. Originally, there were three notches, the middle notch has broken off at the hinge. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are 2-piece smooth walnut with capped forend, straight grip, straight comb and steel crescent buttplate. The stocks have scattered light nicks, scuffs, scratches. There are a few more notable dings, most notable in the left of the wrist just in front of the comb. There are no chips or cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered spots of minor oxidation, nicks and scratches, and some surface erosion at the heel and toe. Overall, the stocks are in Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray. The rifling shows wear, but is generally well defined. There is light erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. Most of the balance is in the receiver and barrel extension which have worn to white. The barrel has some scattered finish wear, most notable along the right shoulder and right flat. The magazine has more notable finish wear. There is wear on the magazine from disassembly/assembly. There are scattered light nicks, scuffs and scratches. There is some minor oxidation, mostly in the worn areas. The action shows operational wear. The screw heads range from sharp to slightly disfigured with a usable slot. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

Not only was it a success, but as of 1983 it held the record for the best-selling center-fire rifle in U.S. history. 5,103,249 Winchester 1894’s and 94’s were produced from 1894 to 1983 alone and it didn’t stop there. From 1984 to 1997, the Model 94 angle eject was introduced and in 2003 the iconic rifle was offered as a .410 shotgun. U.S. production ceased in 2006. At the time there were 14 versions of the Model 94 in the Winchester catalog. In 2010 Winchester Repeating Arms reintroduced the model 94 in two Limited Edition models to commemorate the 200th anniversary of Oliver F. Winchester's birth in New England in 1810.

This is a Model 1894 Takedown rifle made right at the turn of the century. It has a 26” octagonal barrel chambered in .30-30 WCF. It functions well, has an Old West appearance and will fit right in to a Winchester or lever action rifle collection. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 125798

Year of Manufacture: Ca. 1901

Caliber: .30-30 Winchester (WCF)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a Lyman white-beaded blade dovetailed to the front of the barrel. The rear sight is a "V"-notch screw-secured to a dovetail at the rear of the barrel, screw-adjustable for elevation. The sights are not original to the gun. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, scuffs and scratches. There are a few more notable dings. There are tiny losses at the rear edge of the forend. There are no cracks. The wood is generally slightly shy to the metal. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has worn to white or gone to a patina with some scattered oxidation and erosion. Overall, the stocks are in Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original to the parts, the barrel is not original to the gun (see Our Assessment, Mechanics).

Bore Condition: The bore is dark. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 3 or 4 out of 10.

Overall Condition: This rifle retains about 3% of its metal finish. There is a little bit of finish in well protected areas. Most surfaces have gone to a light-moderate patina. There is scattered surface oxidation and erosion. A slot has been cut on the chamber ring, it does not go all the way through. There are scattered nicks, dings, scrapes and scratches. There are tool marks at most screw heads, at the rear sight, and at the magazine bracket. The bracket is missing its indexing pin. The barrel has play to the receiver. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are generally clear, the barrel's Winchester proof is obscured by oxidation. Overall, this rifle is in Fair condition as not parts-original.

Mechanics: The action functions correctly, however the barrel has play to the receiver, the rifle is not safe to fire. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 1894 rifle followed the other John Browning designed lever action rifles to become one of the most famous and popular hunting rifles of all time. It was the first commercial sporting rifle to sell over 7,000,000 units, making the name “Winchester” synonymous with all lever action rifles. It was also the first commercial American repeating rifle built to be used with smokeless powder. It was introduced in 1894 in two black powder cartridges, the .32-40 and .38-55 Win. rounds, but by the next year Winchester had developed a different steel composition that could handle higher pressures, and the .30-30 Win. family of cartridges was born.

This is a Winchester Model 1894 rifle made in Ca. 1901 with a 26” octagonal replacement barrel and chambered in .30-30 Winchester. The .30-30 Winchester paired with the Model 1894 is nearly synonymous with "deer rifle" in America and a classic rifle to add to any collection. This one is not currently safe to fire due to the barrel having play to the receiver, but will display well in a collection. It would also be well worth restoring to functioning condition. Please see our photos and good luck!

Make: Winchester

Model: 1894

Serial Number: 790191

Year of Manufacture: 1916, C&R

Caliber: .30 Winchester Center Fire (.30-30 Winchester)

Action Type: Lever-Action, Fed by a Tubular Magazine

Markings: The top of the barrel, just ahead of the rear sight, is marked “MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. / NEW HAVEN. CONN. U.S.A. PATENTED AUGUST 21. 1894. / .30 W.C.F.”” The upper tang is marked “MODEL 1894 / WINCHESTER / TRADE MARK REG. IN U.S. PAT. OFF.” The bottom of the receiver is marked with the serial number “790191”. The Winchester proof marks appear on the top of the barrel and the top of the receiver.

Barrel Length: 20”

Sights / Optics: The front sight is a blade set in a base. The rear sight is a folding “U”-notch ladder sight dovetailed to the barrel.

Stock Configuration & Condition: The stocks are two-piece walnut with a straight grip, straight comb and steel crescent buttplate. The LOP measures 13” from the front of the trigger to the back of the buttplate. The stocks show moderate handling wear with scattered nicks, compressions, scuffs, and light finish loss throughout. There are no cracks or structural damages observed. The stocks rate in about Good overall condition.

Magazine Quantity & Condition: Tubular magazine, fixed capacity.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray, the rifling is well defined. There is moderate visible erosion in the bore. In this writer’s opinion, the bore rates 7/10.

Overall Condition: This rifle retains about 45% of its metal finish. The balance of the finish shows moderate operational and handling wear with thinning on the receiver, edges, and high contact areas. There are patches of light patina, some oxidation along the magazine tube, and areas of finish loss on the barrel and lever. The screw heads range from lightly tooled to sharp with serviceable slots. The pins are clean. The markings are clear and legible. Overall, this rifle rates in about Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: This Winchester Model 1894, manufactured in 1916, is a classic example of America’s most iconic lever-action rifle. Introduced by John Browning and produced by Winchester, the 1894 became synonymous with the American frontier and remains one of the most beloved sporting rifles in history.

Chambered in .30 W.C.F. (.30-30 Winchester), this rifle was designed to be lightweight, durable, and effective for hunting medium game, especially deer. The 20” barrel and full-length magazine tube indicate this is a standard rifle configuration, making it both collectible and functional for range or field use.

With over a century behind it, this rifle still exhibits solid mechanics, a strong bore, and much of its original charm. For collectors of Winchester rifles, lever guns, or early 20th-century sporting arms, this is a desirable piece with historical value and aesthetic appeal.

Make: Winchester

Model: 94 Carbine

Serial Number: 1197087

Year of Manufacture: 1942

Caliber: .32 Winchester Special

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 20", Round

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base forged to the front of the barrel, the bead is damaged. The base is grooved for a hood that is not present. The rear sight has been removed with a Redfield blank installed in the dovetail. The top tang is drilled, tapped and filled for a tang sight (none present). The left of the receiver has been drilled and tapped with a Redfield receiver sight installed.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb, and a serrated black plastic Ithaca buttplate installed (the plate is not original to the stock). A compass (broken) has been inlaid to the left of the buttstock. There are four notches in the belly toward the toe, possibly intentionally applied. The stocks have some nicks, scuffs and scratches. There are no chips or cracks. The LOP measures 13 1/8" from the front of the trigger to the back of the buttplate. The plate has scattered light wear, some nicks around the edges, and well defined serrations. Overall, the stocks are in about Very Good condition as modified.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 90% of its metal finish. The finish is thinning at all edges. Most of the balance is wear and oxidation on the barrel bands and the bottom-front of the receiver. There is infrequent other minor wear and oxidation. There are some light nicks, scuffs and scratches. The action shows light operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 94 Carbine in .32 Winchester Special that was made in 1942. The cartridge is based on the .30-30, perhaps the most popular deer cartridge in America, but necked-up to .32 caliber, giving it a little more power. This rifle is in Very Good condition with 90% of its metal finish remaining, a good bore and strong mechanics. The stocks have light wear and have been customized with a (broken) compass inlaid to the left of the buttstock. This rifle could be back out in the field dropping game for another lifetime. As a pre-64 example of the 94 Carbine, it would also be a neat addition to a Winchester collection. Please see our photos and good luck!

Make: Winchester

Model: 95 Saddle Ring Carbine

Serial Number: 422870

Year of Manufacture: 1929

Caliber: .30-40 Krag (.30 Army)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 22"

Sights/Optics: The front sight is a Lyman white beaded blade pinned to a slotted base at the front of the barrel. The rear sight is a folding ladder-style sight, presenting a "U"-notch when down and with a "U"-notch slider on the ladder arm.

Stock Configuration and Condition: The stocks are smooth walnut with banded, finger-grooved forend, handguard secured by spring-clips, straight grip, straight comb, and a steel carbine-style buttplate with a sliding door over a storage compartment (nothing in the compartment). The handguard has a crack at the top-rear edge that doesn't quite reach the rear sight cutout. There is a patch-repair in the top of the wrist at the rear of the top tang. There are some scattered light nicks, scuffs and scratches. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has scattered wear, areas going to a light patina, and residue from the stock's new finish. Overall, the stocks are in Good-plus condition as refinished and repaired.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is some scattered minor erosion in the bore. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at all edges. There are evenly scattered nicks,s cuffs and scratches. There is wear on the receiver from the saddle ring and on the bottom-front of the magazine. There is infrequent minor oxidation, mostly on the right of the receiver. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, the rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico. The U.S. Government also ordered carbines, but we are, as of this writing, unable to find records as to just how many.

This saddle ring carbine was made in 1929 during the inter-war years. This example, chambered in .30-40 Krag appears to have seen a fairly gentle life. It retains much of its original metal finish, a nice bore and strong mechanics, though there is some damage and repair in the stocks. This is a neat find for the Winchester collectors and should still prove to be a good shooter. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 412124

Year of Manufacture: 1924

Caliber: .30-06 (.30 Gov't '06)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a blade dovetailed to a base at the front of the barrel. The rear sight is a flat-top "V"-notched elevator sight dovetailed to the rear of the barrel. The top of the chamber ring is finely serrated for glare reduction.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have some light nicks, scuffs and scratches. There is a small filled hole at the toe. There are cracks at the toe on each side. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with scattered scratches and some oxidation. The stocks rate in Good-Very Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and some minor pitting in the bore. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. The balance is mostly in scattered wear on the receiver and lever with some worn areas going to a light patina. There is some minor wear on the barrel with a line of wear on the right near the muzzle. There is some minor surface oxidation. There are scattered light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-plus condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa’s best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever.

This rifle was made in 1924 with a barrel chambered for the venerable .30-06 cartridge. For more than a century, the .30-06 has been among the most popular sporting cartridges in America, suitable for nearly all North American game. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion. This example shows honest wear consistent with its age. It will add nicely to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 411565

Year of Manufacture: 1924

Caliber: .30-06 (.30 Gov't '06)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a Lyman beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top "U"-notch elevator sight dovetailed to the rear of the barrel.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a schnabel-tip forend, ebony inlay, straight grip, straight comb and smooth steel shotgun-style buttplate. The stocks have some scattered light nicks, scuffs and scratches. There are tiny losses at the top-front corners of the wrist and a few tiny cracks around the rear edge of the butt. There are some spots of pooled finish. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with some scattered light surface erosion. Overall, the stocks are in about Very Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is some scattered light erosion in the bore with some minor pitting toward the muzzle-end. In this writer's opinion, the bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 85% of its metal finish. The finish is thinning at all edges. Most of the balance is finish wear on the receiver and barrel extension. There is some other scattered more minor finish wear. There are scattered light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This rifle is a takedown version which was made in 1924, chambered for the venerable .30-06 cartridge. Its walnut stocks have been refinished, but the metal finish is original. The rifle retains a decent bore and strong mechanics. This 1895 shows honest wear, light given its age, and is a nice specimen of a takedown Model 1895. Please see our photos and good luck!

Make: Winchester

Model: 94 Carbine

Serial Number: 1120751

Year of Manufacture: 1940

Caliber: .30-30 Winchester (WCF)

Action Type: Lever Action, Tube Magazine Fed Rifle

Barrel Length: 20", Round

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base forged to the front of the barrel. The base is grooved for a hood that is not present. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. Red paint has been applied to the rear sight. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with banded forend, straight grip, straight comb, and steel carbine-style buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There is some patterned wear in the finish on the right of the buttstock. The LOP measures 13 1/8" from the front of the trigger to the back of the buttplate. The plate has worn to white or gone to a patina with scattered nicks, scratches and some minor erosion. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Most remaining finish is Original, some worn areas show treatment with cold blue.

Bore Condition: The bore is mostly bright with sharp rifling. There is minor erosion, mostly at the muzzle-end. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 35% of its metal finish. There is fairly evenly scattered wear on the barrel and magazine tube with most finish in protected areas or around raised features. The worn areas of the magazine tube have mostly gone to a light patina, worn areas of the barrel in front of the forend band show treatment with cold blue. The receiver has mostly worn to white with the rear portion of the right flat gone to a patina. There are scattered light nicks, scuffs and scratches with some spots of light oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-plus condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 1894 Carbine, made in 1940 with a 20” round barrel chambered in .30-30 Winchester. The 30-30 Win. has likely taken more deer in America than any other cartridge except maybe .30-06 and the model 1894, or simply 94 as it is now known, is one of the most popular rifles ever chambered for the round. This rifle is in Good condition retaining a strong bore and mechanics. It would be perfect for throwing in the back window of your pick-up truck for use on coyotes and other varmints and it would also be a great deer rifle today just as it was when it was made. Being pre-1964 production, it may also interest the Winchester collectors. Please see our photos and good luck!

Make: Winchester, made by Miroku for U.S. Repeating Arms Co.

Model: 1895

Serial Number: NF1064

Year of Manufacture:  Early 2000’s

Caliber: .30-06 Springfield

Action Type: Lever Action with Internal Box Magazine

Markings: The left side of the barrel is marked “ESPECIALLY FOR SMOKELESS POWDER / SPECIAL STEEL BARREL” and at the rear with “NP” proof, the top is marked “30-06 CAL.”, the right is marked “WINCHESTER / LICENSEE / U.S. REPEATING ARMS CO., NEW HAVEN, CT. U.S.A. / MADE IN JAPAN”.  The right of the receiver is marked with the serial number. The top tang is marked “WINCHESTER / MODEL 1895”. The sides of the receiver have floral engraving.

Barrel Length: 24”

Sights / Optics: The front sight is a brass beaded blade pinned into a base fixed to the top of the barrel. The rear sight is a square-notch semi-buckhorn elevator sight dovetailed into the top of the barrel.

Stock Configuration & Condition: The stocks are two-piece checkered walnut with a schnabel forend, straight grip, straight comb, and a steel buttpad. The checkering is sharp. There are no chips or cracks. The LOP measures 13 3/8” from the front of the trigger to the back of the buttplate. Overall, the stocks are in about Excellent condition.

Type of Finish: Matte Blued

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore. In this writer’s opinion the bore rates 10/10.

Overall Condition: This rifle retains about 99% of its original metal finish. There are some scattered faint lines about the metal, most notably on the lever and magazine. Otherwise, there are only light handling marks. The screw heads are sharp. The markings are clear. Overall, this rifle is in about Excellent condition.

Mechanics: The action functions correctly. Rebounding hammer. There is a tang-safety and the trigger pull is crisp. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None. 

Our Assessment: The 1895 Winchester was the first model to incorporate a non-detachable box magazine. Teddy Roosevelt called this model, chambered in .405 WCF, his “Medicine Gun for Lions” (from his book “African Game Trails”). The M1895 rifle became the preference of major powers worldwide, with Russia alone purchasing nearly 300,000 1895’s for use in the Great War. The Model 1895 was designed for the new generation of cartridges utilizing smokeless powder and pointed bullets, and many of its original chamberings remain popular today. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. In the late 1990s and early 2000s, the U.S. Repeating Arms Co. licensed Miroku to produce a limited re-introduction of the design. The rifles were chambered in a variety of original calibers, such as this .30-06 Winchester. This rifle is in Excellent condition with minor handling marks, a great bore and strong mechanics. With its limited production, Winchester collectors who missed their chance when this re-introduction first took place will want to jump on this one. If they fall asleep at the wheel, this will make someone a great “Medicine Gun”.

Make: Winchester

Model: 1895

Serial Number: 94177

Year of Manufacture: 1915

Caliber: .30-40 Krag .30 Army

Action Type: Lever Action with Internal Box Magazine

Markings: The left of the barrel is marked “—NICKEL STEEL BARREL— / ESPECIALLY FOR SMOKELESS POWDER” and “.30 ARMY”. The left side of the receiver is marked “MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN CONN. CONN. U.S.A.” over patent dates. The top tang is marked “MODEL 1895 / —WINCHESTER— / TRADE MARK REG. IN U.S. PAT OFF”.

Barrel Length: 28”

Sights/Optics: The front sight is a beaded blade pinned in a slotted base fixed to the front of the barrel. The rear sight is a “V”-notch elevator sight dovetailed into the barrel.

Stock Configuration and Condition: The stocks are two-piece smooth walnut with schnabel forend with triangular ebony inlay at the tip, straight grip, straight comb, and a steel crescent buttplate. The stocks have some scattered nicks, dings, scuffs and scratches. There is a small crack in the bottom left side of the wrist and another crack on the top right side that starts at the shoulder of the upper tang. The stocks are shy of the metal. They have been sanded and refinished. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has scattered wear, heaviest at the heel and toe, with scattered light surface oxidation and erosion. Overall, the stocks are in Good condition as refinished.

Type of Finish: Blued

Finish Originality: Refinished. The receiver/magazine/lever assembly shows signs of aggressive cleaning and/or polishing.

Bore Condition: The bore is semi-bright and the rifling is well defined. There is light and even erosion throughout the bore. In this writer’s opinion the bore rates 7/10.

Overall Condition: This rifle retains about 35% of its metal finish. Most of the finish is on the barrel which has scattered finish wear and pinprick pitting found throughout but concentrated toward the muzzle end. Most of the receiver has been worn to white or polished. The worn areas show scattered discoloration from oxidation with infrequent minor erosion. There are some scattered light nicks, scuffs and scratches. The action shows operational wear. The markings range from clear to worn, but legible. The screw heads range from sharp to tool marked with useable slots. There are tool marks around some screw heads. Overall, this rifle is in about Good condition.

Mechanics: The action functions correctly. It is fairly smooth, the lever locks up correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). 100 of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico. The U.S. Government also ordered carbines, but we are, as of this writing, unable to find records as to just how many. This 1895 was made in 1915 during the outset years of WWI. This example, chambered in .30-40 Krag, is a somewhat later version made about the time of the massive Russian order of 1915/1916. This 110 year old rifle is mechanically sound, and has a fair bore. The plain fact is, Winchester rifles were exceedingly well built, and regardless of the wear present, it ought to function just as well as ever. Whether you’re looking to add to your Winchester collection or want to restore this for use as a classic hunting rifle, this would be a good addition to any safe in America. Please see our photos and good luck on your bid!

Make: Winchester

Model: 1895

Serial Number: 93522

Year of Manufacture: 1905

Caliber: .405 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights/Optics: The front sight is a white beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top "U"-notch elevator sight dovetailed to the rear of the barrel. There is a strip of matting on the chamber ring for glare reduction.

Stock Configuration and Condition: The stocks are two-piece smooth walnut with steel crescent buttplate, straight grip, straight comb, and schnabel-tip forend with triangular ebony inlay. The stocks have some light nicks, scuffs and scratches with a few more notable dings. There are some grain-line cracks around the rear edge of the butt. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has thinning at the edges with generally strong finish and some scattered minor marks. Overall, the stocks are in about Very Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is scattered minor erosion and stubborn fouling in the bore. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 90% of its metal finish. The finish is thinning at all edges. Most of the balance is finish wear on the left of the receiver and the bottom of the magazine. There are some light nicks and scratches. There is some minor oxidation, mostly in the worn areas. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, the rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This example was made in 1915, a few years after Teddy Roosevelt's hunting trip which created the term "Teddy Bear". Its 24" barrel is chambered for the .405 Winchester cartridge, one of the most powerful cartridges designed for use in lever-action rifles. The rifle is in Very Good condition, retaining 90% original metal finish, a strong bore and great mechanics, appearing to have seen gentle use over the last 110 years. This would be a neat addition to a Winchester collection missing the 1895 Model, especially chambered for the "Big Medicine" cartridge. Please see our photos and good luck!

Make: Winchester

Model: 1895 Takedown

Serial Number: 87369

Year of Manufacture: 1915

Caliber: .303 British

Action Type: Lever Action Takedown Rifle with Internal Box Magazine.

Barrel Length: 28"

Sights / Optics: The front sight is a blade pinned to a slotted base fixed to the front of the barrel. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two-piece checkered select walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have some scattered nicks, dings, scuffs and scratches. There is more notable wear on the top-right edge of the forend toward the rear. The checkering is generally well defined. We suspect that the checkering has been chased or is not factory checkering. There are no chips or cracks. The LOP measures 14 7/8” from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with some light surface erosion. The stocks rate in about Very Good overall condition as likely refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is some scattered minor erosion in the bore. In this writer's opinion, the bore rates about 8 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at most edges. Most of the balance is finish wear on the magazine, lever and barrel extension. There is some other scattered more minor finish wear. There are scattered light nicks, scuffs and scratches with infrequent minor surface oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This rifle is a takedown version which was made in 1915, chambered for .303 British. It has higher grade walnut stocks, though the checkering's borders and overall quality may indicate that the checkering is not original. This example shows honest wear, light given its age, and is a nice specimen of a takedown Model 1895. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 81755

Year of Manufacture: 1915

Caliber: .30-03 Springfield (.30 Gov't 1903)

Action Type: Lever Action Takedown Rifle with Internal Box Magazine.

Barrel Length: 24"

Sights / Optics: The front sight is a Marble Sheard beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a schnabel-tip forend, ebony inlay, straight grip, straight comb and steel crescent buttplate. A custom sprung detent pin has been installed just in front of the takedown switch in the bottom of the forend. The stocks have scattered nicks, dings, scuffs and scratches. The left of the wrist has been hand-carved with "LL". There is a loss at the left-front of the forend on the top edge. There are cracks on each side of the buttstock near the toe. The buttstock's finish has scattered crazing and voids. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with some scattered minor surface erosion. Overall, the stocks are in Good-plus condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion in the bore. There is a shallow bulge in the bore just behind the front sight. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 7% of its metal finish. The barrel's feed ramp shows notable wear and appears to have been weld-repaired. Most surfaces have worn or been polished to white. There is infrequent remaining finish in well protected areas. There is some scattered minor oxidation and surface erosion, most notable on the magazine. The left of the magazine has been hand-scribed with "LL". There are scattered light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Good condition.

Mechanics: The custom detent for the takedown switch likely indicates that the original does not work properly. Otherwise, the action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This rifle is a takedown version which was made in 1915, chambered for the .30-03 cartridge, the precursor to the venerable .30-06. After 1908, the .30-03 was only available by special order, indicating that this is a special order rifle. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion. This example looks like someone started restoring it, a project that would be well worth completing. It is an interesting specimen of a special-order Model 1895 and will add nicely to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1895 Takedown

Serial Number: 64807

Year of Manufacture: 1911

Caliber: .405 Winchester Centerfire (WCF)

Action Type: Lever Action Takedown Rifle with Internal Box Magazine.

Barrel Length: 24"

Sights / Optics: The front sight is a german silver blade dovetailed to a base fixed to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The chamber ring has a strip of matting for glare reduction. The left of the receiver has a Lyman 21 receiver sight installed.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a schnabel-tip forend, ebony inlay, straight grip, straight comb and steel crescent buttplate. The stocks have some light nicks, scuffs and scratches. There are no chips or cracks. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has gone to a fairly uniform patina. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is erosion scattered through the bore. In this writer's opinion, the bore rates 7 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at most edges. The balance is mostly in scattered minor oxidation, primarily on the receiver and barrel extension. There are some light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This takedown example was made in 1911, a few years after Teddy Roosevelt's hunting trip which created the term "Teddy Bear". Its 24" barrel is chambered for the .405 Winchester cartridge, one of the most powerful cartridges designed for use in lever-action rifles. The rifle is in Very Good condition, retaining 87% original metal finish, a strong bore and great mechanics, appearing to have seen gentle use over the last 110 years. This would be a neat addition to a Winchester collection missing the 1895 Model, especially chambered for the "Big Medicine" cartridge. Please see our photos and good luck!

Make: Winchester

Model: 95 Saddle Ring Carbine

Serial Number: 62107

Year of Manufacture: 1910

Caliber: .30-40 Krag (.30 U.S.)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 22"

Sights/Optics: The front sight is a brass beaded blade pinned to a slotted base at the front of the barrel. The rear sight is a folding ladder-style sight, presenting a "U"-notch when down and with a "U"-notch slider on the ladder arm.

Stock Configuration and Condition: The stocks are smooth walnut with banded, finger-grooved forend, handguard secured by spring-clips, straight grip, straight comb, and a steel carbine-style buttplate with a sliding door over a storage compartment (nothing in the compartment). The stocks have scattered nicks, dings, scuffs and scratches. There is discoloration around the edges where they meet metal. The belly has a circular recess with two small holes where something was previously mounted. The LOP measures 12 1/2" from the front of the trigger to the back of the buttplate. The plate has gone to a moderate-dark patina with some scattered minor erosion. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and minor pitting in the bore. In this writer's opinion, the bore rates about 6 out of 10.

Overall Condition: This rifle retains about 5% of its metal finish. Finish remains only in protected areas and around some raised features. Most surfaces have gone to a fairly uniform light patina with edges worn to white. There are some scattered light nicks and scratches. There is erosion around the edges of the forend, likely indicating there is erosion under the forend. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, the rifle is in Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico. The U.S. Government also ordered carbines, but we are, as of this writing, unable to find records as to just how many.

This saddle ring carbine was made in 1910 before the outbreak of the Great War. This example, chambered in .30-40 Krag appears to have seen a long and useful life. The rifle is intact with a little bit of original finish remaining and strong mechanics, in Good condition. This is a neat find for the Winchester collectors and may still prove to be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 56574

Year of Manufacture: 1907

Caliber: .35 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a Marble sheard brass beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top "U"-notch elevator sight dovetailed to the rear of the barrel. There is a strip of matting on the chamber ring for glare reduction.

Stock Configuration & Condition: The stocks are two piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have some scattered nicks, dings, scuffs and scratches. There are cracks at the toe on each side. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The plate has mostly gone to a light patina with scattered scuffs and scratches. The stocks rate in Good-Very Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion and pitting in the bore. In this writer’s opinion, this bore rates 6 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at all edges. There are some scattered light nicks, scuffs and scratches. There is infrequent light wear. There is some faint erosion and oxidation. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This example was made in 1907 after the turn of the century. Its 24" barrel is chambered for the .35 Winchester cartridge, a medium-bore round that can push a 250 grain bullet past 2,000 fps. The rifle is in Very Good condition, retaining 87% original metal finish, a decent bore and good mechanics, appearing to have seen responsible use over the last 120 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 54036

Year of Manufacture: 1905

Caliber: .40-72 Winchester Centerfire (WCF)

Action Type: Lever Action Rifle with Internal Box Magazine.

Barrel Length: 26"

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed and screw-set to the front of the barrel. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have some scattered nicks, dings, scuffs and scratches. There is a crack in the top of the wrist to the right of the top tang. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The plate has worn to white with some scattered minor oxidation. The stocks rate in Good-Very Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion and spots of pitting in the bore. In this writer’s opinion, this bore rates 6+ out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at all edges. The balance is mostly in scattered wear in the receiver, lever and magazine that has gone to a light patina. There are some scattered light nicks, scuffs and scratches. There is some scattered minor surface oxidation and erosion. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This example was made in 1905 after the turn of the century. Its 26" barrel is chambered for the .40-72 Winchester cartridge. The .40-72 Win. was a blackpowder straight walled cartridge developed for the 1895 rifle, and introduced with the rifle in 1895. By 1911, it was dropped by Winchester as an available cartridge in favor of the more popular smokeless cartridges. However, people are still using them and making cases from .405 Winchester brass. The rifle is in Very Good condition, retaining 87% original metal finish, a decent bore and good mechanics, appearing to have seen responsible use over the last 120 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 50803

Year of Manufacture: 1905

Caliber: .405 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights/Optics: The front sight is a Lyman white beaded blade dovetailed to a base fixed to the front of the barrel. The barrel has a dovetail for a rear sight, currently filled with a blank. The left of the receiver has a Lyman 21 receiver sight installed. There is a strip of matting on the chamber ring for glare reduction.

Stock Configuration and Condition: The stocks are checkered select walnut with schnabel forend, inlaid ebony tip, straight grip, straight comb, and a smooth steel shotgun-style buttplate. The stocks have scattered nicks, dings, scuffs and scratches. The checkering shows some wear, but is generally well defined. The toe is notably proud to the buttplate. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white or gone to a patina with some scattered surface erosion. Overall, the stocks are in about Very Good condition as not original to the gun.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is scattered minor erosion and stubborn fouling in the bore. In this writer's opinion, the bore rates 7+ out of 10.

Overall Condition: This rifle retains about 90% of its metal finish. The finish is thinning at all edges. Most of the balance is in scattered minor surface oxidation, primarily on the receiver. There are some light nicks and scratches. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, the rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: This rifle comes with a Cody Firearms Records Office records search which indicates that this rifle's serial number was applied July 7, 1905, the rifle was received in warehouse August 11 and shipped August 12, 1905.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This example was made in 1905, just a few years after Teddy Roosevelt's hunting trip which created the term "Teddy Bear". Its 24" barrel is chambered for the .405 Winchester cartridge, one of the most powerful cartridges designed for use in lever-action rifles. The rifle is in Very Good condition, retaining 90% original metal finish, a strong bore and great mechanics, appearing to have seen gentle use over the last 120 years. The stocks have been replaced, but are select walnut checkered in a pattern that strongly suggests they were made by Winchester. This would be a neat addition to a Winchester collection missing the 1895 Model, especially chambered for the "Big Medicine" cartridge. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 48889

Year of Manufacture: 1905

Caliber: .38-72 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base, dovetailed and screw-set to the front of the barrel. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have some scattered nicks, dings, scuffs and scratches. There is discoloration at some edges where the wood meets metal. There are no chips or cracks. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered surface oxidation. The stocks rate in Very Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is scattered light erosion and some minor pitting in the bore. In this writer’s opinion, this bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 80% of its metal finish. The finish is thinning at all edges. The balance is mostly in scattered wear in the receiver. Most worn areas are going to a light patina. There are scattered nicks, scuffs and scratches. There is some light oxidation and minor erosion, mostly in the worn areas. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This example was made in 1905, just after the turn of the century. Its 26" octagonal barrel is chambered for the .38-72 Winchester cartridge. The .38-72 Win. was a blackpowder bottleneck cartridge developed for the 1895 rifle, and introduced with the rifle in 1895. The cartridge is no longer in commercial production, however, people are still using them and making cases from .405 Winchester brass. The rifle is in Very Good condition, retaining 80% original metal finish, a decent bore and good mechanics, appearing to have seen responsible use over the last 120 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 45711

Year of Manufacture: 1904

Caliber: .35 Winchester Centerfire (WCF)

Action Type: Lever Action Rifle with Internal Box Magazine.

Barrel Length: 24”

Sights / Optics: The front sight is a Marble No. 3 sight with a fixed brass beaded blade and a folding aperture, dovetailed to a base fixed to the front of the barrel. The folding aperture is dented and we were not able to fold it into the up position. The front sight is not original to the gun. There is a dovetail at the rear of the barrel, but it is empty. The left of the receiver has a Lyman 21 receiver sight installed.

Stock Configuration & Condition: The stocks are two piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. A sling swivel is installed in the belly, but there is no forward sling mount. The stocks have some scattered nicks, dings, scuffs and scratches. There is a loss on the top-left edge of the forend toward the front. There is a short crack at the right-front edge of the wrist and a few grain-line cracks around the rear edge of the buttstock. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with scattered nicks, scratches, and infrequent erosion. The stocks rate in Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with sharp rifling. There is scattered light erosion and a little minor pitting in the bore. In this writer’s opinion, this bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. There is fairly evenly scattered wear, a little more notable in the receiver and lever. There are scattered nicks, scuffs and scratches, most notable on the left of the barrel over the front of the forend and just in front of the receiver sight. There is infrequent surface erosion, mostly on the right receiver flat. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, this rifle is in Good condition.

Mechanics: The action functions correctly. The trigger is crisp. The lever locks up correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This example was made in 1904 just after the turn of the century. Its 24" barrel is chambered for the .35 Winchester cartridge, a medium-bore round that can push a 250 grain bullet past 2,000 fps. The rifle is in Good condition, retaining 60% original metal finish, a decent bore and good mechanics, appearing to have seen its fair share of use over the last 120 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 4409

Year of Manufacture: 1896

Caliber: .38-72 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 26"

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed and screw-set to the front of the barrel. The rear sight is a “V” notched elevator sight dovetailed into the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two piece smooth walnut with a straight grip, straight comb, steel crescent buttplate and a Schnabel tipped forend with an ebony triangle inlet into the wood at the nose. The stocks have scattered nicks, scuffs and scratches, mostly and most notable in the buttstock. There are no chips or cracks. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The plate has mostly muted or worn to white with scattered minor oxidation. The stocks rate in Fine-plus overall condition as Antique.

Type of Finish: Blue, Case Hardened Hammer & Trigger Plate

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is some scattered minor erosion and infrequent pits in the bore. In this writer's opinion, the bore rates 7 or 8 out of 10.

Overall Condition: This rifle retains about 80% of its metal finish. The finish is thinning at all edges. There is light wear in the handling areas such as the top tang, bottom-front of the magazine and around the front of the receiver. There is some scattered minor surface oxidation. There are some light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle rates in Fine-Excellent condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first model to incorporate a non-detachable box magazine. This is the model Teddy Roosevelt called his “Big Medicine” that he used in hunting here and in Africa. The rifle became the preference of major powers worldwide, with Russia alone purchasing nearly 300,000 1895’s just before World War I. The Model 1895 was designed for the new generation of cartridges utilizing smokeless powder and spitzer (pointed) bullets, and many of its original chamberings remain popular today. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever.

This is a particularly early 1895 chambered for .38-72. While a potent cartridge, able to fire a 275 grain projectile at nearly 1,500 fps, it was developed as a black powder cartridge at the outset of the smokeless era. The cartridge was swiftly replaced by faster and more powerful smokeless cartridges. The rifle is in Fine-Excellent condition as Antique, appearing to have seen quite limited use over the last 128 years. An early "flatside" model, the receiver and magazine have a different profile than the later production rifles. This along with its high condition makes it a nice find for the collectors. Who knows? Maybe the handloaders may get it back out on the range or in the field for another century. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 43078

Year of Manufacture: 1904

Caliber: .35 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights/Optics: The front sight is a brass beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a Winchester Express three-leaf "V"-notch sight dovetailed to the rear of the barrel. The top tang has been drilled and tapped for a tang sight (not present), the screws installed in the holes appear to be mounting screws for a tang sight, not fill-screws (or the original stock mounting screw).

Stock Configuration and Condition: The stocks are smooth walnut with schnabel forend with ebony inlay, straight grip, straight comb, and steel crescent buttplate. The stocks have scattered nicks, scuffs and scratches with a few more notable dings and bruises. There is some discoloration around the edges where they meet metal. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered nicks, scratches and spots of oxidation. Overall, the stocks are in Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is light erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains about 10% of its metal finish. Finish is mostly in protected areas and around raised features. Most surfaces have worn to white. There is some scattered surface oxidation and faint surface erosion. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are generally clear, the top tang marking is interrupted by the tang-sight screw hole. Overall, the rifle is in about Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This example was made in 1903 right at the turn of the century. Its 24" barrel is chambered for the .35 Winchester cartridge, a medium-bore round that can push a 250 grain bullet past 2,000 fps. The rifle is in Good condition, retaining 10% original metal finish, a fair bore and good mechanics, appearing to have seen its fair share of use over the last 120 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 95 Carbine

Serial Number: 414415

Year of Manufacture: 1925

Caliber: .30-06 Springfield (.30 Gov't '06)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 22"

Sights/Optics: The front sight is a Marble Sheard No. 6 brass beaded blade pinned to a slotted base at the front of the barrel. The top of the barrel has two drilled and tapped holes for the original rear sight (not present). The left of the receiver has a Redfield receiver sight installed, adjustable for windage and elevation. The sights are not original to the gun.

Stock Configuration and Condition: The stocks are smooth walnut with finger-grooved forend secured by a barrel band, straight wrist, straight comb, and steel carbine-style buttplate with a sliding door over the storage compartment (nothing in the compartment). The forend has recesses for a handguard's spring-clips, but no handguard is present. The stocks have scattered nicks, dings, scuffs and scratches. There is a repaired crack in the right of the wrist next to the top tang and another at the rear of the top tang to the left of the comb. There is some sanding under the finish, mostly around the top of the wrist. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has mostly gone to a moderate patina with wear at the toe and scattered erosion. Overall, the stocks are in about Very Good condition as refinished and repaired.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 35% of its metal finish. Strongest finish is in the rear half of the barrel, where it would have been covered with a handguard installed, there is wear from installation/removal of the handguard. There is al little bit of finish forward of the barrel band. Other surfaces have mostly worn to white or gone to a light patina. There is scattered light oxidation with some small nicks and light scratches. The saddle ring is missing, but its mount is present. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, the rifle is in Fair-Good condition (see Mechanics).

Mechanics: There is an issue with the hammer or sear engagement. When the hammer is operated manually, it takes too much force to catch the sear and there is no over-travel. The hammer is tensioned against the bolt during operation, causing excessive friction on the bolt. Otherwise, the action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This saddle ring carbine was made in 1925 during the inter-war years. This example, chambered in .30-06 has had its original ladder rear sight removed, but the receiver has a Redfield receiver sight installed. The saddle ring has been removed as well as the handguard over the forend. The rifle is in Fair-Good condition, retaining 35% original metal finish and a fair bore. There is a mechanical issue with the hammer or sear, causing excessive friction on the bolt when the lever is operated. This is a neat find for the Winchester collectors and would be well worth getting back into good working order. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 408302

Year of Manufacture: 1923

Caliber: .30-06 (.30 Gov't '06)

Action Type: Takedown Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a Lyman white beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight dovetail is currently filled with a blank. The left of the receiver is drilled and tapped with a Lyman 21 receiver sight installed. The chamber ring is matted for glare reduction, the Winchester proof is offset for this matting.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a schnabel-tip forend, ebony inlay, straight grip, straight comb and smooth steel crescent buttplate. The stocks have some scattered light nicks, scuffs and scratches. There are are a few more notable dings. Some marks have been finished over. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with some scattered minor surface erosion. Overall, the stocks are in about Very Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and very minor pitting in the bore. In this writer's opinion, the bore rates about 6 out of 10.

Overall Condition: This rifle retains about 65% of its metal finish. The finish is thinning at all edges. Most of the balance is finish wear on the receiver and barrel extension. There is some other scattered more minor finish wear. The worn areas are going to a light patina and there is infrequent minor surface erosion. There are some light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the "medicine gun" for lion.

This rifle is a takedown version which was made in 1923, chambered for the venerable .30-06 cartridge. Its walnut stocks have been refinished, but the metal finish is original. The rifle retains a fair bore and strong mechanics. This 1895 shows honest wear, and is a neat specimen of a takedown Model 1895. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 406993

Year of Manufacture: 1922

Caliber: .30-03 (.30 Gov't '03)

Action Type: Lever Action Rifle with Internal Box Magazine.

Barrel Length: 24"

Sights / Optics: The front sight is a Marble Sheard brass beaded blade dovetailed to a base at the front of the barrel. The rear sight is a flat-top "V"-notched elevator sight dovetailed to the rear of the barrel. The top of the chamber ring is finely serrated for glare reduction.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have a few scattered minor marks. There is a dark patch in the belly that is a feature of the wood grain. There are no chips or cracks. The LOP measures 12 1/2" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered nicks, scratches and some oxidation. The stocks rate in Very Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is scattered minor erosion in the bore. In this writer's opinion, the bore rates 7 or 8 out of 10.

Overall Condition: This rifle retains about 65% of its metal finish. The finish is thinning at all edges. The balance is mostly in scattered wear on the receiver, magazine and lever with most worn areas going to a light patina. There is some minor surface oxidation. There are scattered light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa’s best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever.

This rifle was made in 1922 with a barrel chambered in .30-03. The .30-03 was only a standard chambering for the 1895 from its introduction in 1905 until 1908 when it was replaced by the new .30-06 cartridge. After 1908, the .30-03 was only available by special order, indicating that this is a special order rifle. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion. This example shows honest wear, fairly light given its age. It is an interesting specimen of a special-order Model 1895 and will add nicely to any collection. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 39417

Year of Manufacture: 1903

Caliber: .35 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 24"

Sights/Optics: The front sight is a Marble Sheard brass beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top, "U"-notch elevator sight dovetailed to the rear of the barrel. The left of the receiver has been drilled and tapped for a receiver sight (none present).

Stock Configuration and Condition: The stocks are smooth walnut with schnabel forend, inlaid ebony tip, straight grip, straight comb, and a checkered hard rubber Winchester buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There is a short crack at the rear of the top tang. There is dark discoloration around the metal and scattered crazing in the finish, mostly in the buttstock. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The plate has moderate wear. Overall, the stocks are in Good condition.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is light erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 15% of its metal finish. Finish is mostly in protected areas and around raised features. Most surfaces have worn to white or gone to a light patina with scattered minor oxidation and some faint surface erosion. There are some scattered nicks and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are generally clear, the patent marks on the receiver are slightly interrupted by the receiver sight screw-hole. Overall, the rifle is in about Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This example was made in 1903 right at the turn of the century. Its 24" barrel is chambered for the .35 Winchester cartridge, a medium-bore round that can push a 250 grain bullet past 2,000 fps. The rifle is in Good condition, retaining 15% original metal finish, a fair bore and good mechanics, appearing to have seen its fair share of use over the last 120 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 95 Carbine

Serial Number: 36517

Year of Manufacture: 1903

Caliber: .30-40 Krag (.30 U.S.)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 22"

Sights/Optics: The front sight is a white beaded blade pinned to a slotted base at the front of the barrel. The rear sight is a ladder-style sight screwed to the rear of the barrel. The sight presents a "U"-notch when folded down and has a "U"-notched slider on the ladder arm, graduated from 800-1,800 yards. The left of the receiver has a Redfield receiver sight installed, adjustable for windage and elevation. The top tang has been drilled and tapped for a tang sight (not present). A correct stock mounting screw is installed, but the tang sight screw is filled with what appears to be a sight mounting screw, not a fill-screw.

Stock Configuration and Condition: The stocks are smooth walnut with finger-grooved forend secured by a barrel band, handguard secured to the barrel by spring-clips around the rear sight, straight wrist, straight comb, and steel carbine-style buttplate with a sliding door over the storage compartment (nothing in the compartment). The stocks have scattered nicks, scuffs and scratches. The handguard is cracked at the front edge of the rear sight cut. The LOP measures 12 5/8" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered oxidation. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates 6 out of 10.

Overall Condition: This rifle retains about 70% of its metal finish. The finish is thinning at all edges. Most of the finish wear is in the receiver, magazine and lever. The edges of the worn areas are going to a light patina. There is an arc of wear on the left of the receiver from the missing saddle ring. There are some light nicks and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, the rifle is in Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This saddle ring carbine was made in 1903, just after the turn of the century. This example, chambered in .30-40 Krag, has survived the last 120 years fairly well, retaining a fair bore and strong mechanics, retaining much of its original blue finish. The saddle ring has been removed and a Redfield receiver sight installed. This is a neat find for the Winchester collectors and may still prove to be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 26326

Year of Manufacture: 1900

Caliber: .40-72 WCF

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 26", Octagonal

Sights / Optics: The front sight is a beaded blade dovetailed and screw-set to the front of the barrel. The rear sight is a "V"-notch semi-buckhorn elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present)

Stock Configuration & Condition: The stocks are two piece smooth walnut with steel crescent buttplate, Schnabel forend tip with ebony insert, straight grip, and straight comb. The stocks have some scattered nicks, dings, scuffs and scratches. There are dings in the front of the comb from a previously installed tang sight. There is discoloration at some edges where the wood meets metal. There are no chips or cracks. The LOP measures 12 5/8” from the front of the trigger to the back of the buttplate. The plate has worn to white with some scattered minor oxidation. The stocks rate in Very Good overall condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is light gray with well defined rifling. There is scattered light erosion and spots of pitting in the bore. In this writer’s opinion, this bore rates 6 out of 10.

Overall Condition: This rifle retains about 60% of its metal finish. The finish is thinning at all edges. The balance is mostly in scattered wear in the receiver, lever and magazine with some wear on the barrel around and behind the rear sight. Most worn areas are going to a light patina. There are scattered nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: This rifle comes with a Winchester factory records letter indicating it shipped as a Rifle chambered for .40-72 with an octagonal trigger, received in warehouse May 15, 1900 and shipped November 12, 1901 on order 121921.

Our Assessment: The 1895 Winchester was the first lever-action model to incorporate a box magazine. The box magazine allowed the use of spitzer-type bullets without the danger of ignition in a tubular magazine. The use of spitzer bullets improved ballistics and allowed for much higher velocities, especially with the use of smokeless powder. At the time of its introduction, the 1895 was considered the lever action big-game rifle, but it also saw favor with some militaries, being purchased in large numbers by the Russian Empire for WWI, given to Pancho Villa's best troops during the Mexican Revolution, and 10,000 were purchased by the US Military for use during the Spanish American War. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever. Teddy Roosevelt himself favored the 1895 Winchester, considering his rifle chambered in .405 to be the “medicine gun” for lion.

This example was made in 1900, just before the turn of the century. Its 26" octagonal barrel is chambered for the .40-72 Winchester cartridge. The .40-72 Win. was a blackpowder straight walled cartridge developed for the 1895 rifle, and introduced with the rifle in 1895. By 1911, it was dropped by Winchester as an available cartridge in favor of the more popular smokeless cartridges. However, people are still using them and making cases from .405 Winchester brass. The rifle is in about Very Good condition, retaining 60% original metal finish, a decent bore and good mechanics, appearing to have seen responsible use over the last 125 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: Custom 1895 Carbine

Serial Number: 22814

Year of Manufacture: 1899

Caliber: .30-40 Krag (.30 Army)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 22"

Sights/Optics: The front sight is a blade pinned to a slotted base at the front of the barrel. The top of the barrel has five drilled and tapped holes, one pair at the receiver, one pair over the front of the forend, and one hole between the pairs. Four of the holes are filled, the second from the rear is not. The left of the receiver has a Lyman 21 receiver sight installed.

Stock Configuration and Condition: The stocks are smooth walnut with schnabel forend, inlaid ebony tip, straight grip, straight comb with shadow-line cheekpiece, and a checkered hard rubber Winchester buttplate. There is a hole in the belly for a sling stud (not present), there is no provision for a forward sling mount. The forend has cracks at the front on each side and at the rear on the left. There is a small loss at the top-rear corner of the forend on the left. The stocks have scattered nicks, dings, scuffs and scratches. The LOP measures 12 7/8" from the front of the trigger to the back of the buttplate. The plate has light wear with well defined checkering. Overall, the stocks are in Good condition as partially not original to the gun.

Type of Finish: Blue, Case Color Hammer & Trigger Plate

Finish Originality: Original to the parts. The oval "P" on the barrel indicates that it was replaced outside the factory. We suspect that the muzzle-end of the barrel was touched up.

Bore Condition: The bore has been re-lined and is counter-bored about 1/2" into the liner. The bore is mostly bright with sharp rifling. There is infrequent stubborn erosion and some copper fouling in the bore. In this writer's opinion, the bore rates 8 out of 10 as re-lined.

Overall Condition: This rifle retains about 25% of its metal finish. Finish is mostly in protected areas and around raised features. The barrel has an oddly well-defined band of oxidation at the muzzle with what appears to be touched-up blue around the front sight. There is some finish along the bottom of the barrel with scattered wear and minor oxidation along the top. The receiver has mostly gone to a light patina with scattered minor oxidation. There are some light nicks and scratches. The action shows operational wear. The screw heads range from sharp to disfigured with usable slots. The markings range from clear to worn, but legible. Overall, the rifle is in about Good condition as customized.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This custom carbine was made in 1899 right at the turn of the century. This example, chambered in .30-40 Krag appears to have had a long and useful life. Its barrel was replaced sometime after 1905 and has since been re-lined and counter-bored. The buttstock has been replaced and now has an attractive shadow-line cheekpiece. The barrel has provisions for mounting sights, but currently the rear sight is a Lyman 21 Receiver sight. The rifle is in about Good condition as customized, retaining 25% metal finish, a strong bore and good mechanics. This is a neat find for the Winchester collectors and should still prove to be a good shooter. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 20464

Year of Manufacture: 1899

Caliber: .30-40 Krag (.30 U.S.)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 28"

Sights/Optics: The front sight is a Marble blade pinned to a slotted base fixed to the front of the barrel. The rear sight is a flat-top, "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation.

Stock Configuration and Condition: The stocks are smooth walnut with schnabel forend, straight grip, straight comb, and steel crescent buttplate. The forend is inlet for an ebony tip, but it is missing. There is a small loss at the front edge of the forend and a larger one at the top-rear corner on the left. There is notable wear at the forend mounting screw. The toe has cracking where it has been pushed out a little bit and there is some sort of custom carving on the left of the comb. The stocks have scattered nicks, dings, scuffs and scratches. There is some sanding under the finish, mostly on the buttstock. The LOP measures 12 3/4" from the front of the trigger to the back of the buttplate. The plate has worn to white with scattered surface erosion. The toe is bent forward a bit. Overall, the stocks are in about Good condition as refinished.

Type of Finish: Blue

Finish Originality: Original

Bore Condition: The bore is gray with well defined rifling. There is light erosion and pitting scattered through the bore. In this writer's opinion, the bore rates 5 or 6 out of 10.

Overall Condition: This rifle retains about 10% of its metal finish. Finish is mostly in protected areas and around raised features. Most surfaces have worn to white or gone to a light patina with scattered minor oxidation and some faint surface erosion. There are scattered nicks, scrapes and scratches. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, the rifle is in about Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This example was made in 1899 right at the turn of the century. Its 28" barrel is chambered for the .30-40 Krag cartridge, still designated as ".30 U.S." in 1899 while it was the cartridge used by the Army's standard infantry rifle. The rifle is in Good condition, retaining 10% original metal finish, a fair bore and good mechanics, appearing to have seen its fair share of use over the last 125 years. This would be a neat addition to a Winchester collection missing the 1895 Model. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 1831

Year of Manufacture: 1896

Caliber: .38-72 Win. (38-72 W.C.F.)

Action Type: Lever Action with Internal Box Magazine

Markings: The top of the barrel at the receiver is marked “38-72 W.C.F.”. The top of the barrel in front of the rear sight dovetail is marked “-MANUFACTURED BY THE- / -WINCHESTER REPEATING ARMS CO. NEW HAVEN, CONN. U.S.A.-”. The top tang is marked -“WINCHESTER / MODEL 1895.”-. The bottom tang is marked “1831”. The bottom of the trigger plate is marked “PAT. NOV. 5. 1895 / NOV. 12. 1895”.

Barrel Length: The octagonal barrel has been cut to 25".

Sights / Optics: The front sight is a steel base dovetailed to the front of the barrel, the dovetail and blade are not original to the gun. There is a dovetail for a rear sight, currently filled with a blank. The left of the receiver is drilled and tapped with a Lyman 21 receiver sight installed; we do not know if the Lyman sight was installed at the factory.

Stock Configuration & Condition: The stocks are two piece smooth walnut with a straight grip, straight comb, steel crescent buttplate and a Schnabel tipped forend with a black triangle inlet into the wood at the nose. The stocks have scattered nicks, dings, scuffs and scratches. There are cracks in the wrist with a repair through the wrist. There are notable dings on the right of the forend. The LOP measures 12 1/2” from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with scattered surface erosion. The stocks rate in Good-plus overall condition as repaired Antique.

Type of Finish: Blue, Case Hardened Hammer & Trigger Plate

Finish Originality: Original

Bore Condition: The bore is dark. The rifling is worn, but visible. There is erosion and pitting scattered through the bore. In this writer's opinion, the bore rates about 4 out of 10.

Overall Condition: This rifle retains about 20% of its metal finish. There is scattered remaining finish, mostly in protected areas or around raised features, with a little on exposed flats. There are scattered nicks, scuffs, and scratches. There is some scattered light surface oxidation and erosion. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are generally clear, the trigger plate patent markings are obscured by erosion. Overall, this rifle rates in Very Good condition as Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first model to incorporate a non-detachable box magazine. This is the model Teddy Roosevelt called his “Big Medicine” that he used in hunting here and in Africa. The rifle became the preference of major powers worldwide, with Russia alone purchasing nearly 300,000 1895’s just before World War I. The Model 1895 was designed for the new generation of cartridges utilizing smokeless powder and spitzer (pointed) bullets, and many of its original chamberings remain popular today. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever.

This is a particularly early 1895 chambered for .38-72. While a potent cartridge, able to fire a 275 grain projectile at nearly 1,500 fps, it was developed as a black powder cartridge at the outset of the smokeless era. The cartridge was swiftly replaced by faster and more powerful smokeless cartridges. The rifle is in Very Good condition and appears to have been someone’s favorite. The barrel has been shortened with a repair to the stock, showing honest wear consistent with its age of nearly 130 years. An early “flatside” model, the receiver and magazine have a different profile than the later production rifles. This along with its octagonal barrel makes it a nice find for the collectors. Who knows? Maybe the handloaders may get it back out on the range or in the field for another century. Please see our photos and good luck!

Make: Winchester

Model: 1895

Serial Number: 1244

Year of Manufacture: 1896

Caliber: .38-72 Win. (38-72 W.C.F.)

Action Type: Lever Action with Internal Box Magazine

Markings: The top of the barrel at the receiver is marked “38-72 W.C.F.”. The top of the barrel in front of the rear sight is marked “-MANUFACTURED BY THE- / -WINCHESTER REPEATING ARMS CO. NEW HAVEN, CONN. U.S.A.-”. The top tang is marked -“WINCHESTER / MODEL 1895.”-. The bottom tang is marked “1244”. The bottom of the trigger plate is marked ""PAT. NOV. 5. 1895 / -NOV. 12. 1895"".

Barrel Length: 26”, Octagonal

Sights / Optics: The front sight is a german silver blade in a slotted base dovetailed and screw-set to the front of the barrel. The rear sight is a “V” notched elevator sight dovetailed into the barrel; the notch is fine-adjustable for elevation.

Stock Configuration & Condition: The stocks are two piece smooth walnut with a straight grip, straight comb, steel crescent buttplate and a Schnabel tipped forend with an ebony triangle inlet into the wood at the nose. The stocks have scattered nicks, scuffs and scratches, most notable on the right side. There are no chips or cracks. The LOP measures 12 1/2” from the front of the trigger to the back of the buttplate. The plate has mostly muted or gone to a nickel-like appearance with scattered minor erosion. The stocks rate in Very Good-Fine overall condition as Antique.

Type of Finish: Blue, Case Hardened Hammer & Trigger Plate

Finish Originality: Original

Bore Condition: The bore is semi-bright with sharp rifling. There is scattered light erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates 6 or 7 out of 10.

Overall Condition: This rifle retains about 35% of its metal finish. The finish is thinning at all edges. The barrel has mostly gone to a mottled light patina with some finish remaining around raised features. The receiver and magazine have comparatively strong finish with handling wear in the grip areas and bottom of the magazine. The top tang has repaired cracks at each corner of the hammer slot with discoloration around the repairs. There are some scattered light nicks, scuffs and scratches. There is infrequent minor oxidation. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle rates in Very Good condition as repaired Antique.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The 1895 Winchester was the first model to incorporate a non-detachable box magazine. This is the model Teddy Roosevelt called his “Big Medicine” that he used in hunting here and in Africa. The rifle became the preference of major powers worldwide, with Russia alone purchasing nearly 300,000 1895’s just before World War I. The Model 1895 was designed for the new generation of cartridges utilizing smokeless powder and spitzer (pointed) bullets, and many of its original chamberings remain popular today. With its quick handling characteristics, box magazine and pointed bullet capability, the Model 1895 changed the world of sporting rifles forever.

This is a particularly early 1895 chambered for .38-72. While a potent cartridge, able to fire a 275 grain projectile at nearly 1,500 fps, it was developed as a black powder cartridge at the outset of the smokeless era. The cartridge was swiftly replaced by faster and more powerful smokeless cartridges. The rifle is in Very Good condition as repaired Antique, having repaired cracks at the corners of the hammer slot in the top tang. The rifle otherwise shows fairly light wear for its age of nearly 130 years. An early ""flatside"" model, the receiver and magazine have a different profile than the later production rifles. This makes it a nice find for the collectors. Who knows? Maybe the handloaders may get it back out on the range or in the field for another century. Please see our photos and good luck!

Make: Winchester

Model: 95 Carbine

Serial Number: 423669

Year of Manufacture: 1929

Caliber: .30-40 Krag (.30 Army)

Action Type: Lever Action with Internal Box Magazine

Barrel Length: 22""

Sights/Optics: The front sight is a blade pinned to a slotted base at the front of the barrel. The blade appears to have previously had a bead, but it has broken off. The top of the barrel has two drilled, tapped and filled holes for the original rear sight (not present). The left of the receiver has a Lyman No. 21 receiver sight installed, the tensioning screw does not have a finger-lever.

Stock Configuration and Condition: The stocks are smooth walnut with finger-grooved forend, straight wrist, straight comb, and checkered hard rubber Winchester buttplate. There is a sling eyelet installed in the belly near the toe and another mounted to the forend's barrel band. The forend has recesses for a handguard's spring-clips, but no handguard is present. There is a small loss at the toe and a few tiny losses at the front corners of the wrist. The wrist has discoloration around the edges. There are a few other scattered minor marks. The LOP measures 12"" from the front of the trigger to the back of the buttplate, indicating that the stock has been cut and the plate is not original. The plate has scattered light wear and well defined checkering. Overall, the stocks are in about Very Good condition as refinished.

Type of Finish: Blued

Finish Originality: Refinished

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore. In this writer's opinion, the bore rates 9 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is generally strong, most of the balance is light surface oxidation on the receiver. There is oxidation at the rear sight fill-screws on the barrel. There is scattered erosion under the finish on the receiver and bolt. The saddle ring is missing. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, the rifle is in Very Good condition as refinished.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork, and Accessories: None.

Our Assessment: The 1895 Winchester was the first lever action model to incorporate a fixed box magazine (i.e., it could not be removed). This is the model Teddy Roosevelt used for hunting both here in the United States and in Africa—he referred to it as his “Big Medicine”. With quick handling characteristics, a box magazine, and spitzer—more aerodynamic, accurate—bullet capability, the Model 1895 completely changed the world of sporting rifles. This rifle pattern was utilized by major powers worldwide, with Russia alone purchasing nearly 300,000 1895 rifles in the lead-up to World War I. In 1898, the United States ordered 10,000 1895 rifles in musket form for use in the Spanish-American War (the war ended before they could be delivered, however). One hundred of those were issued for field testing in the Philippines and the remaining 9,900 were later sold to a private business. Many 1895 rifles were shipped to the new Cuban government in 1906 and some even found their way to Pancho Villa’s troops in Mexico.

This saddle ring carbine was made in 1929 during the inter-war years. This example, chambered in .30-40 Krag has had its original ladder rear sight removed, but the receiver has a Lyman No. 21 receiver sight. The saddle ring has been removed as well as the handguard over the forend. The rifle is in Very Good condition as refinished, retaining much of its new metal finish, a strong bore and great mechanics. This is a neat find for the Winchester collectors and should make for a good shooter, too. Please see our photos and good luck!

Make: Winchester

Model: 53

Serial Number: 7416

Year of Manufacture: 1927

Caliber: .44-40 Winchester Center Fire (.44 W.C.F.)

Action Type: Lever Action with Tubular Magazine

Barrel Length: 22"

Sights / Optics: The front sight is a Marble No. 3 brass beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top, "V"-notch elevator sight dovetailed to the rear of the barrel. The sights are not original to the rifle. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight wrist, straight comb and serrated steel shotgun-style buttplate. The stocks have scattered nicks, scuffs and scratches. There are a few more notable dings in the comb. There is a thin crack at the left-rear of the top tang. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate shows treatment with cold blue, scattered wear and erosion, with well defined serrations. Overall, the stocks are in Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright. The rifling is sharp where not interrupted by erosion. There is some scattered light erosion and minor pitting in the bore. In this writer's opinion, the bore rates 7 out of 10.

Overall Condition: This rifle retains about 65% of its metal finish. The finish is thinning at all edges. Remaining finish is mostly in the barrel with some finish in protected areas of the receiver and bolt. The receiver has mostly worn to white or gone to a light patina. There are some scattered light nicks, scuffs and scratches. There is residue from the stocks' new finish. There is infrequent minor erosion. There are tool marks around some screw heads. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Good-plus condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester's Model 53 is essentially the same as the 1892, but was offered with fewer special order features. Introduced in 1924, the standard model was chambered for .25-20 with a 22" round barrel, 6-shot button magazine, straight grip and shotgun-style steel buttplate. Special order features included chambering for .32-20 or .44-40 (or .218 Bee very late in production), takedown frame, pistol grip, set-trigger, crescent buttplate and deluxe wood.

This example was made in 1927 and is chambered for .44-40. The rifle has seen some use over the last 98 years, retaining a majority of its original metal finish, refinished stocks, a strong bore and good mechanics. The rifle would be a nice addition to a Winchester collection and should still prove to be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 53

Serial Number: 44

Year of Manufacture: 1924

Caliber: .32-20 W.C.F.

Action Type: Lever Action with Tubular Magazine

Markings: The left side of the barrel is marked "-MODEL 53-", "WINCHESTER / -TRADE MARK-", "-NICKEL STEEL " 32-20 W.C.F.-". The top of the barrel and receiver have ovalled "WP" proofs. The top tang is marked "WINCHESTER / -TRADE MARK- / -MADE IN U.S.A.-". The right of the barrel is marked "MADE IN U.S.A. WINCHESTER REPEATING ARMS CO. / NEW HAVEN, CONN.". The bottom-front of the receiver is marked with the serial number "44".

Barrel Length: 22"

Sights / Optics: The front sight is a Lyman brass beaded blade dovetailed to a base fixed to the front of the barrel. The rear sight is a flat-top, "U"-notch elevator sight dovetailed to the rear of the barrel. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, straight wrist, straight comb and serrated steel shotgun-style buttplate. The stocks have some light nicks, scuffs and scratches. There are no chips or cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has mostly gone to a dark, nearly black patina with erosion concentrated at the heel and toe. The stocks may have been lightly sanded and re-oiled. There is some finish pooled in infrequent spots around the grip. Overall, the stocks are in about Very Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is mild erosion throughout and some heavier pitting between the muzzle and the midlength. In this writer's opinion the bore rates 5/10.

Overall Condition: This rifle retains about 50% of its metal finish. The finish is thinning at all edges. The balance of the finish on the barrel is strong and complete. Most of the finish on the receiver and forend cap, including the lever and hammer, have taken to a light to dark mottled patina throughout. There are some scattered light nicks, scuffs and scratches. There is some minor surface erosion at the muzzle as well as a nick on the left outer edge. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. The action is fairly smooth and the lever locks up correctly. The hammer has a half-cock safety position. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester's Model 53 is essentially the same as the 1892, but was offered with fewer special order features. Introduced in 1924, the standard model was chambered for 25-20 with a 22" round barrel, 6-shot button magazine, straight grip and shotgun-style steel buttplate. Special order features included chambering for 32-20 or 44-40 (or .218 Bee very late in production), takedown frame, pistol grip, set-trigger, crescent buttplate and deluxe wood.

This is a particularly early example, serial 44, and is chambered for .32-20. The rifle has seen some use over the last 100 years and its stocks were refinished somewhere along the way. The rifle retains the majori

Make: Winchester

Model: 55

Serial Number: 1039143

Year of Manufacture: 1928

Caliber: .30-30 W.C.F. (Winchester Center Fire)

Action Type: Lever Action, Tube Magazine Fed Takedown Rifle

Barrel Length: 24”

Sights / Optics: The front sight is a white beaded blade dovetailed to a base forged to the barrel. The rear sight has been removed, its dovetail filled with a blank. The top tang is drilled, tapped and filled for a tang sight (none present). The left of the receiver has been drilled and tapped with a Lyman 66A receiver sight installed (matching assembly numbers). The sights are not original to the rifle.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped forend, straight grip, straight comb, and serrated steel shotgun-style buttplate. There are holes drilled in the nosecap and belly for sling mounts (none present). The stocks have some scattered nicks, dings, scuffs and scratches. There is cracking at the heel. There is discoloration around the edges of the buttplate and top tang. The LOP measures 13 1/8" from the front of the trigger to the back of the buttplate. The plate has worn to white with erosion around the top mounting screw, some light oxidation, nicks, scratches and well defined serrations. Overall, the stocks are in Good-plus condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There are a few spots of light erosion in the bore. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 70% of its metal finish. The finish is thinning at all edges. The barrel and magazine tube have generally strong finish. The balance is mostly in the receiver and barrel extension which have mostly worn to white or gone to a light patina. There is some finish remaining around raised features. The barrel and magazine have infrequent more minor wear. There are some light nicks, scuffs and scratches. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: By the early 1920’s, Winchester’s Model 94 rifle was losing sales, and in 1924 Winchester introduced an updated version of the Model 94 rifle dubbed the Model 55. The Winchester Model 55 was a rifle with a 24-inch barrel, a half-magazine that held three cartridges and was a takedown rifle which was convenient for storage and transport. It was initially chambered only in .30-30 Win., but .25-35 Win. and .32 Win. Spl. were added in 1926. For the first few years, the Model 55 carried its own set of serial numbers. Eventually, Winchester started producing Models 55 with a solid frame, using Model 94 receivers and serialized in the established Model 94 range. In 1932, with approximately 20,500 guns made, the Model 55 was discontinued to make way for the Winchester Model 64. This rifle was made in 1928, with a takedown action and serialized in the Model 94 serial range. The rifle has honest wear consistent with its age, but it still retains a strong bore and mechanics. This rifle could be heading back out in the field to drop some deer but would also help round out a collection missing the Model 55. Please see our photos and good luck!

Make: Winchester

Model: 64A

Serial Number: 3712462

Year of Manufacture: 1972

Caliber: .30-30 WCF

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade dovetailed to a serrated, ramped base fixed to the front of the barrel. The base is grooved for a hood that is not present. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The left of the receiver is drilled, tapped and filled for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth wood with beavertail forend, pistol grip, straight comb, and checkered black plastic shotgun-style Winchester buttplate. The stocks have some light nicks, scuffs and scratches. There is light handling wear in the grip areas. There are no chips or cracks. The LOP measures 13 1/2" from the front of the trigger to the back of the buttplate. The plate has light wear at the heel and around the edges with well defined checkering. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is no erosion in the bore, but there is a little stubborn copper fouling. In this writer's opinion, the bore rates 9 out of 10.

Overall Condition: This rifle retains about 96% of its metal finish. The receiver has some minor frosting. The action shows light operational wear. There are a few other minor marks. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, this rifle is in about Fine condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the more scarce lever action models made by Winchester. A 2nd batch of 8,250 was produced in the early 1970s, designated the 64A.

This is a Winchester Model 64A Rifle in .30-30 with a 24” barrel and 3/4 length magazine tube. The .30-30 is perhaps the most popular cartridge for deer hunting in America and paired with the 94 action, is among the most common deer rifles in the country. This rifle is in about Fine overall condition, showing minor wear, a strong bore and good mechanics. If the collectors don’t take enough notice, this will make someone a very nice hunting rifle. Please see our photos and good luck!

Make: Winchester

Model: 64 (possibly made on a 94 action)

Serial Number: 1714220

Year of Manufacture: The receiver was made in 1950.

Caliber: .219 Zipper

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 26"

Sights / Optics: The front sight is a beaded blade dovetailed to a hooded, textured, ramped base forged to the front of the barrel. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The bolt has a 98a peep sight installed. The left of the receiver is drilled, tapped and filled for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with beavertail forend, pistol grip, straight comb, and checkered steel shotgun-style buttplate. A sling plate has been inlet to the belly of the buttstock, but there is no provision for a forward sling mount. The stocks have scattered light nicks, scuffs and scratches. There is a short crack at the rear of the top tang. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has has wear at the heel and around the edges with well defined checkering. Overall, the stocks are in about Very Good condition as altered.

Type of Finish: Blued

Finish Originality: Receiver finish is Original. The barrel's oval "P" marking indicates replacement outside the factory and the barrel has been refinished.

Bore Condition: The bore is semi-bright and the rifling is sharp. There is some scattered minor erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 90% of its current metal finish. The finish is thinning at most edges. There are scattered light nicks, scuffs and scratches with a few more notable marks. There is infrequent minor oxidation. The bottom tang shows odd discoloration. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition as custom-assembled.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the more scarce lever action models made by Winchester. A 2nd batch of 8250 was produced in the early 1970’s, but those made before 1964 have better quality and smoothness of operation than that found on more modern Model 94’s.

This is a custom-assembled Winchester with a Model 64 barrel in .219 Zipper. The receiver may be from an original Model 64 or the bottom tang could have been altered to its current pistol-grip profile. The .219 zipper is essentially a .30-30 necked down to .22 caliber, making for a "zippy" varmint cartridge suitable for a lever-action rifle. The rifle is in Very Good overall condition as custom-assembled, showing honest wear, a decent bore and strong mechanics. If the collectors don’t take enough notice, this will make someone a very interesting hunting rifle. Please see our photos and good luck!

Make: Winchester

Model: 64 Deluxe "Deer Rifle"

Serial Number: 1602108

Year of Manufacture: 1949

Caliber: .32 Winchester Special

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 24"

Sights / Optics: The front sight is a brass beaded blade dovetailed to a textured, ramped base forged to the front of the barrel. The base is grooved for a hood that is not present. There is a dovetail for a rear sight currently filled with a blank. The left of the receiver is drilled and tapped with a Lyman 56 receiver sight installed, adjustable for windage and elevation.

Stock Configuration & Condition: The stocks are two-piece checkered walnut with beavertail forend, capped pistol grip, straight comb, checkered steel shotgun-style buttplate and a sling-plate mounted in the belly (the other is dovetailed to the nosecap). The stocks have scattered nicks, scuffs and scratches. There is some handling wear in the grip areas and there is wear on the bottom-front of the forend from the sling swivel. There are no chips or cracks. The checkering is well defined. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has wear at the heel and around the edges with well defined checkering. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is infrequent minor erosion in the bore, mostly at the muzzle-end. In this writer's opinion, the bore rates 8+ out of 10.

Overall Condition: This rifle retains about 93% of its metal finish. The finish is thinning at most edges. The balance is mostly in light handling wear on the bottom of the receiver and scattered spots of light oxidation on the receiver and lever. The barrel has only a couple of spots of minor oxidation. There are some light nicks and small scratches. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good-plus condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: The installed Super Grade QD sling swivels are included.

Our Assessment: This is a Winchester Model 64 Rifle in .32 Winchester Special with a 24” barrel and 3/4 length magazine tube. The rifle is a 64 Deer Rifle, the deluxe version with checkered stocks, capped grip and sling mounts front and rear. Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the rarer lever action models made by Winchester. A second batch of 8250 was produced in the early 1970’s, but those made before 1964 have better quality and smoothness of operation than that found on more modern Model 94’s.

This example is in Very Good-plus condition, showing light wear consistent with responsible use in the field. Despite being made in the late 1940s, it retains about 93% of its metal finish. The bore is still nice and the mechanics are strong. We expect the Winchester collectors to be very interested in this rifle, especially as it is the Deluxe model. If the collectors don’t take enough notice, this will make someone a very nice deer rifle. Please see our photos and good luck!

Make: Winchester

Model: 64

Serial Number: 1499653

Year of Manufacture: Ca. 1948

Caliber: .30-30 WCF

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base forged to the front of the barrel; the bead has a spot of red paint. The base is grooved for a hood that is not present. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The left of the receiver is drilled, tapped and filled for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece walnut with beavertail forend, pistol grip, straight comb, and checkered steel shotgun-style buttplate. The forend has flats on each side, indicating modification or replacement. The forend has minor light play front-to-back. The stocks have scattered light nicks, scuffs and scratches. There is a tiny loss in the top of the wrist at the shoulder on the left edge of the tang. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has wear at the heel and around the edges with a patch of compressed checkers below the heel and otherwise well defined checkering. Overall, the stocks are in about Very Good condition as refinished and/or replaced.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is infrequent minor erosion and some stubborn fouling in the bore. In this writer's opinion, the bore rates 8+ out of 10.

Overall Condition: This rifle retains about 90% of its metal finish. The finish is thinning at all edges. There is handling wear on the bottom of the receiver and some scattered more minor wear. There are scattered light nicks, scuffs and small scratches. There is some stubborn residue built up around the receiver sight. There is some stubborn dried grease. The action shows operational wear. The screw heads range from sharp to tool marked with usable slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the more scarce lever action models made by Winchester. A 2nd batch of 8250 was produced in the early 1970’s, but those made before 1964 have better quality and smoothness of operation than that found on more modern Model 94’s.

This is a Winchester Model 64 Rifle in .30-30 with a 24” barrel and 3/4 length magazine tube. The .30-30 is perhaps the most popular cartridge for deer hunting in America and paired with the 94 action, is among the most common deer rifles in the country. This rifle is in Very Good overall condition, showing honest wear, a strong bore and good mechanics. If the collectors don’t take enough notice, this will make someone a very nice hunting rifle. Please see our photos and good luck!

Make: Winchester

Model: 64 Deluxe “Deer Rifle”

Serial Number: 1465815

Year of Manufacture: 1943 through 1947

Caliber: .32 W.S.

Action Type: Top Ejecting Lever Action with 2/3 Length Tubular Magazine

Markings: The left side of the barrel is marked “MADE IN NEW HAVEN, CONN. U.S. OF AMERICA / -WINCHESTER PROOF STEEL-“, -“WINCHESTER / -TRADE MARK-“-, “MODEL 64 – 32 W.S.-The top of the barrel and the receiver chamber ring are each marked with a “WP” proof. The underside of the receiver is marked “1465815”. The lower tang in front of the trigger is marked with “CV”.

Barrel Length: 24”

Sights / Optics: The front sight is a Marble beaded blade dovetailed into a hooded, textured ramp that is fixed to the barrel. The blade is not original and sits too high where the blade is sitting against the top of the hood. The rear sight is a Marble’s “v” notched flat-top semi-buckhorn elevator sight that is dovetailed into the barrel with the notch fine-adjustable for elevation and a white diamond aim reference. The left side of the receiver is drilled, tapped, and filled for the mounting of a receiver sight (not included).

Stock Configuration & Condition: The stocks are two-piece checkered walnut with semi-beavertail forend, capped pistol grip, fluted straight comb, White Line Junior Skeet L vented rubber buttpad, and a sling-plate mounted in the belly (the other is integral to the nosecap. The stocks have light handling wear with a few scattered light nicks, dings, scuffs and scratches. There is a small crack on the left side of the wrist where the receiver begins to form the upper tang. The checkering is well defined and attractive. The LOP measures 13 3/8″ from the front of the trigger to the back of the buttpad. The buttpad has minor wear at the heel and toe with some minor cracking at the vents. The rear of the buttstock appears to have been lacquered and the finish on the right side has crazing. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright and the rifling is sharp. There is no erosion in the bore. There is some minor stubborn fouling in the grooves. In this writer’s opinion the bore rates 9/10

Overall Condition: This rifle retains about 95% of its metal finish. The finish is strong throughout with some thinning on the leading edges and muzzle. There is infrequent surface oxidation on the lever and bottom tang. The action shows light operation wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Fine condition.

Mechanics: The action functions smoothly and correctly, and the trigger is crisp. This rifle has lever and half-cock hammer safeties. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 64 Rifle in .32 W.S with a 24” barrel and ¾ length magazine tube. The rifle is a 64 Deer Rifle, the deluxe version with checkered stocks, capped grip and sling mounts front and rear. In about Fine overall condition, this rifle retains about 95% of its original finish, the bore is bright with sharp rifling and no erosion. Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were travelling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only.

Make: Winchester

Model: 64

Serial Number: 1412785

Year of Manufacture: 1943-1948

Caliber: .30-30 WCF

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base forged to the front of the barrel. The base is grooved for a hood that is not present. The rear sight has been cut from its base, leaving what is functionally a blank in the dovetail. The left of the receiver is drilled and tapped with a Lyman 66A receiver sight installed, adjustable for windage and elevation.

Stock Configuration & Condition: The stocks are two-piece walnut with beavertail forend, pistol grip, straight comb, and checkered steel shotgun-style buttplate. The stocks have scattered light nicks, scuffs and scratches with a few more notable dings and some scraping in the buttstock. There is a tiny loss in the top of the wrist at the shoulder on the right edge of the tang. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has wear and some minor oxidation at the heel and around the edges with well defined checkering. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is infrequent minor erosion and some stubborn copper fouling in the bore. In this writer's opinion, the bore rates 8 out of 10.

Overall Condition: This rifle retains about 87% of its metal finish. The finish is thinning at all edges. There is handling wear on the bottom of the receiver and some wear on the top-rear of the barrel. The barrel shows wear from a previously installed elevator sight. There are scattered minor nicks, scuffs and scratches with a few more notable nicks at the bottom of the left receiver flat. There is some stubborn residue built up around the receiver sight. There is infrequent minor oxidation, mostly on the top tang and the lever plate. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the more scarce lever action models made by Winchester. A 2nd batch of 8250 was produced in the early 1970’s, but those made before 1964 have better quality and smoothness of operation than that found on more modern Model 94’s.

This is a Winchester Model 64 Rifle in .30-30 with a 24” barrel and 3/4 length magazine tube. The .30-30 is perhaps the most popular cartridge for deer hunting in America and paired with the 94 action, is among the most common deer rifles in the country. This rifle is in Very Good overall condition, showing honest wear, a strong bore and good mechanics. If the collectors don’t take enough notice, this will make someone a very nice hunting rifle. Please see our photos and good luck!

Make: Winchester

Model: 64

Serial Number: 1140331

Year of Manufacture: 1940

Caliber: .219 Zipper

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 26"

Sights / Optics: The front sight is a brass beaded blade dovetailed to a hooded, textured, ramped base forged to the front of the barrel. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel. The bolt has a 98a peep sight installed. The left of the receiver is drilled, tapped and filled for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece walnut with beavertail forend, pistol grip, straight comb, and checkered steel shotgun-style buttplate. The stocks have scattered light nicks, scuffs and scratches with a few more notable dings in the buttstock. There is a short crack in the heel at the point of the buttplate's tang. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has mostly gone to a light patina with some surface erosion and well defined checkering. Overall, the stocks are in about Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is semi-bright and the rifling is sharp. There is some scattered minor erosion and infrequent minor pitting in the bore. In this writer's opinion, the bore rates about 7 out of 10.

Overall Condition: This rifle retains about 90% of its metal finish. The finish is thinning at most edges. There are some scattered light nicks and small scratches. There is infrequent minor oxidation. The most notable finish wear is on the lever plate. The action shows operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the more scarce lever action models made by Winchester. A 2nd batch of 8250 was produced in the early 1970’s, but those made before 1964 have better quality and smoothness of operation than that found on more modern Model 94’s.

This is a Winchester Model 64 Rifle in .219 Zipper with a 26” barrel and 3/4 length magazine tube. The .219 zipper is essentially a .30-30 necked down to .22 caliber, making for a "zippy" varmint cartridge suitable for a lever-action rifle. The rifle is in Very Good overall condition, showing honest wear, a decent bore and strong mechanics. If the collectors don’t take enough notice, this will make someone a very nice hunting rifle. Please see our photos and good luck!

Make: Winchester

Model: 64 ""Carbine""

Serial Number: 1114912

Year of Manufacture: 1940

Caliber: .32 Winchester Special

Action Type: Tubular Magazine Fed Lever Action Rifle

Barrel Length: 20""

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base fixed to the front of the barrel. The base is the appropriate short-type for the 20"" Model 64. The base is grooved for a hood, but none is present. The rear sight is a ""U""-notch elevator sight dovetailed to the rear of the barrel. It has been filed to a flat-top profile, the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present). The left of the receiver is drilled, tapped and filled for a receiver sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with capped, semi-beavertail forend, pistol grip, straight comb and checkered steel buttplate. The forend has been refinished. There are some specks of blue and white residue on the buttstock. There are some scattered light nicks and scratches. There are no chips or cracks. The LOP measures 13 1/8"" from the front of the trigger to the back of the buttplate. The plate has mostly worn to white with scattered light oxidation and well defined checkering. Overall, the stocks are in Very Good condition as, at least partially, refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is some scattered minor erosion in the bore. In this writer's opinion, the bore rates about 8 out of 10.

Overall Condition: This rifle retains about 65% of its metal finish. The finish is thinning at all edges. The barrel and magazine have generally strong finish with infrequent minor oxidation. The receiver has mostly worn to white with some areas going to a light patina. There are some light nicks and scratches and spots of minor erosion on the receiver and lever. The action shows operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in about Very Good condition.

Mechanics: The action functions correctly. This rifle has lever and half-cock hammer safeties. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: Winchester’s venerable Model 94 rifle, long a favorite of hunters and outdoorsmen, was beginning to lose sales in the early 1920’s, although the shorter barreled carbine was still popular. More people were traveling by motorcar and railroad, and Winchester thought a takedown rifle based on the Model 94 would sell well. The Model 55 was introduced in 1924, but never sold particularly well, and was discontinued in 1932 when it was superseded by the Model 64. The Model 64 was a redesign of the Model 55 with a longer magazine tube and made with a solid frame only. The Model 64 stayed in production until 1957, with a total of only 66,783 manufactured, making it one of the rarer lever action models made by Winchester. A 2nd batch of 8250 was produced in the early 1970’s, but those made before 1964 have better quality and smoothness of operation than that found on more modern Model 94’s.

This is a Winchester Model 64 Rifle in .32 Special with a 20” barrel and 3/4 length magazine tube. The 20"" Model 64 rifles were not designated as ""Carbines"" by Winchester, but have picked up that name from collectors due to the barrel length being the same as the Model 94 Carbines. The rifle is in about Very Good overall condition, retaining the majority of its original finish, light wear in the stocks, good mechanics and a strong bore. If the collectors don’t take enough notice, this will make someone a very nice deer rifle. Please see our photos and good luck!

Make: Winchester

Model: 65

Serial Number: 1006291

Year of Manufacture: ca. 1941

Caliber: .32 Winchester Center Fire

Action Type: Lever Action fed by Internal Tube Magazine

Markings: The left side of the barrel is marked “WINCHESTER PROOF STEEL / MODEL 65 / WINCHESTER TRADE MARK / 32 W.C.F” The bottom of the receiver is marked “1006291” The top tang is marked “WINCHESTER TRADE MARK MADE IN USA” The right side of the barrel is marked “MADE IN U.S.A. WINCHESTER REPEATING ARMS CO / NEW HAVEN CONN”.

Barrel Length: 22”

Sights / Optics: The front sight is a beaded blade dovetailed into a serrated ramp with a protective hood. The rear sight is a buckhorn elevator sight.

Stock Configuration & Condition: The stocks are two piece walnut, with fluted straight comb, checkered steel buttplate, smooth semi pistol grip, and a smooth fore end. The LOP is 13” from the front of the trigger to the back of the buttplate. There are only minor use and storage marks to the very attractive wood. There are no chips or cracks. The stocks rate in about Fine condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is bright. The rifling is sharp. There is no erosion in the bore. In this writer's opinion the bore rates 10/10.

Overall Condition: This rifle retains about 98% of its metal finish. There are light marks from use and storage, but certainly no damage. The screwheads are sharp. The markings are clear. Overall, this rifle rates in about Excellent condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance requirements.

Box, Paperwork & Accessories: None

Our Assessment: The Winchester Model 65 had a relatively short run in the time span of Winchester lever-action rifles. Manufactured from 1933 to 1947, the Model 65 could be described as a successor to the Model 53, which itself was an improvement on the design of the famous Model 1892. The Model 65 was the rarest of the 1892 family. Only about 5,700 were manufactured, compared to 25,000 for the Model 53 and approximately a million for the 1892. The Model 1892 and its successors were all chambered in popular small-game cartridges. With its limited production, original finish and pre-war manufacture date, this Model 65 should be of interest to the Winchester collectors.

Make: Winchester

Model: 65

Serial Number: 1006283

Year of Manufacture: Ca. 1937

Caliber: .25-20 WCF

Action Type: Lever Action with Button Magazine

Barrel Length: 22"

Sights / Optics: The front sight is a beaded blade dovetailed to a textured, ramped base forged to the front of the barrel; the base is grooved for a hood that is not present. The rear sight is a "V"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with semi-beavertail capped forend, pistol grip, straight comb and checkered steel shotgun-style buttplate. The stocks have scattered nicks, dings, scuffs and scratches. There is cracking in the wrist and at the heel. There is a small loss at the top-front corner of the wrist on the right. There is a repaired chip at the toe. The forend has minor play. There is discoloration around the rear of the butt. The fit of the wrist to the tangs is imperfect, it is possible that the buttstock is a replacement. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has scattered oxidation and erosion with generally well defined checkering. Overall, the stocks are in about Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is scattered light erosion in the bore, mostly at the muzzle-end. In this writer's opinion, the bore rates about 8 out of 10

Overall Condition: This rifle retains about 85% of its metal finish. The finish is thinning at all edges. The most notable finish wear is in the lever and the bottom of the receiver with some scattered more minor wear. There are scattered light nicks, scuffs and scratches with some minor surface oxidation. The action shows light operational wear. There are tool marks around some screw heads. The screw heads range from sharp to disfigured with usable slots. The markings are clear. Overall, this rifle is in about Very Good condition.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 65 had a relatively short run in the time-span of Winchester lever-action rifles. Manufactured from 1933 to 1945, the Model 65 could be described as a successor to the Model 53, which itself was an improvement on the design of the famous Model 1892. The Model 65 was the rarest of the 1892 family. Only about 7,000 were manufactured, compared to 25,000 for the Model 53 and approximately a million for the 1892. The Model 1892 and its successors were all chambered in popular small-game cartridges. This Model 65 was produced fairly early, ca. 1937. The .25-20 WCF is based on the .32-20 cartridge necked down to .25 caliber. Introduced in 1895, it was popular in its day for small game and is still in production today. This rifle retains original finish, a good bore and strong mechanics, though there is some damage to the stocks. With its limited production and pre-war manufacture date, this Model 65 should be of interest to the Winchester collectors and should still prove to be a fun shooter. Please see our photos and good luck!

Make: Winchester

Model: 65

Serial Number: 1002739

Year of Manufacture: Ca. 1937

Caliber: .218 Bee

Action Type: Lever Action with Button Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a brass beaded blade dovetailed to a hooded, textured, ramped base forged to the front of the barrel. The rear sight is a "U"-notch elevator sight dovetailed to the rear of the barrel; the notch is fine-adjustable for elevation. The bolt has a 98a peep sight installed, adjustable for windage and elevation. The top tang is drilled, tapped and filled for a tang sight (none present).

Stock Configuration & Condition: The stocks are two-piece smooth walnut with semi-beavertail capped forend, pistol grip, straight comb and checkered steel shotgun-style buttplate. The stocks have scattered light nicks, scuffs and scratches. There are more notable dings at the heel on the left and on the bottom-front of the forend. There are no chips or cracks. The LOP measures 13" from the front of the trigger to the back of the buttplate. The plate has light nicks and scratches with well defined checkering. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: The barrel's finish is Original, the receiver has been Refinished.

Bore Condition: The bore is mostly bright and the rifling is sharp. There is infrequent minor erosion in the bore, mostly at the muzzle-end. In this writer's opinion, the bore rates 9 out of 10

Overall Condition: This rifle retains about 97% of its current metal finish. The finish is generally strong throughout with infrequent edge-thinning. There are a few light scuffs and scratches, most notable on the front sight ramp. The receiver's finish has a slight plum hue. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Fine condition as partially refinished.

Mechanics: The action functions correctly. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: The Winchester Model 65 had a relatively short run in the time-span of Winchester lever-action rifles. Manufactured from 1933 to 1945, the Model 65 could be described as a successor to the Model 53, which itself was an improvement on the design of the famous Model 1892. The Model 65 was the rarest of the 1892 family. Only about 7,000 were manufactured, compared to 25,000 for the Model 53 and approximately a million for the 1892. The Model 1892 and its successors were all chambered in popular small-game cartridges. This Model 65 was produced fairly early, ca. 1937. The .218 Bee is based on the .32-20 cartridge necked down to .22 caliber. It has maintained a devoted following since the 1930s as a small caliber, high velocity target and varmint cartridge that will fit into pistol-caliber actions. The barrel finish is Original, but the receiver has been refinished. The rifle retains a nice bore and strong mechanics. With its limited production and pre-war manufacture date, this Model 65 should be of interest to the Winchester collectors and should still prove to be a good shooter. Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 71

Serial Number: 8586

Year of Manufacture: 1937

Caliber: .348 Winchester

Action Type: This rifle has a lever action with a two thirds length tubular magazine.

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade dovetailed to a hooded, textured, ramped base fixed to the front of the barrel. There is a dovetail at the rear of the barrel which is currently filled with a blank. The top of the bolt is cut for a Winchester 98-A peep sight which is installed, adjustable for windage and elevation.

Stock Configuration & Condition: The stocks are 2-piece smooth walnut with a pistol grip, fluted straight comb, semi-beavertail forend with steel cap, and checkered blued steel buttplate. The stocks have a few scattered light marks. There are short cracks and a filled loss at the heel. There is another small filled loss at the top-front corner of the wrist on the left. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has scattered wear going to a light patina with well defined checkering. Overall, the stocks are in about Very Good condition as refinished.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore. In this writer's opinion, the bore rates 8 or 9 out of 10.

Overall Condition: This rifle retains about 94% of its metal finish. The finish is thinning at most edges. The most notable finish wear is on the magazine cap with more minor wear on the bottom of the receiver. There are a few light nicks, scuffs and small scratches. There is some residue built up on dried grease, mostly around the top and bottom of the locking bolts. There are infrequent spots of minor oxidation. The action shows light operational wear. The screw heads range from sharp to tool marked with strong slots. The markings are clear. Overall, this rifle is in Very Good condition.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 71 rifle made in 1937. The Model 71 was a continuation of the 1886 design, with a pistol grip, shorter magazine tube and round barrel, produced in only two variants, 24" and 20". This rifle is chambered in .348 WCF, the only cartridge the 71 was ever chambered for besides experimental models, and which was actually developed just for this model. The cartridge is great for North American big game hunting in brush where shorter shots are taken and with modern projectiles such as Hornady's Lever-evolution can now perform well at longer ranges, as well.

This rifle is in Very Good condition with about 94% of its original metal finish remaining. The bore is mostly bright with sharp rifling and a little minor erosion. The stocks have some light damage consistent with use in the field. All of the Winchester rifles made before 1964 are prized by shooters and collectors alike, but the Model 71 was produced for 22 years, a relatively short production life for a Winchester, with fewer than 50,000 rifles made altogether. A model 71 in any condition will likely bring a lot of interest from the Winchester collectors and this example retains much of its original metal finish, a nice bore and strong mechanics. It would make for a nice shooter or addition to a collection. Please see our photos and good luck!

Make: Winchester Repeating Arms

Model: 71

Serial Number: 8449

Year of Manufacture: 1937

Caliber: .348 Winchester

Action Type: This rifle has a lever action with a two thirds length tubular magazine.

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade dovetailed to a hooded, textured, ramped base fixed to the front of the barrel. There is a dovetail at the rear of the barrel which is currently filled with a blank. The top of the bolt is cut for a Winchester 98-A peep sight which is installed, adjustable for windage and elevation.

Stock Configuration & Condition: The stocks are 2-piece smooth walnut with a pistol grip, fluted straight comb, semi-beavertail forend with steel cap, and checkered blued steel buttplate. Sling swivels have been installed in the belly and the nosecap. The stocks have some scattered light marks. There is some light finish wear at the toe. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has light wear around the edges with light oxidation in the well defined checkering. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: Refinished

Bore Condition: The bore is mostly bright with sharp rifling. There is infrequent minor erosion in the bore. In this writer's opinion, the bore rates 8 or 9 out of 10.

Overall Condition: This rifle retains about 96% of its current metal finish. The finish is thinning at some edges, most notable at the muzzle and the front edge of the magazine tube. There are a few scattered thin scratches and minor nicks. There are a few small marks under the finish. The action shows light operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in about Fine condition as refinished.

Mechanics: The action functions correctly. We did not fire this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: None.

Our Assessment: This is a Winchester Model 71 rifle made in 1937. The Model 71 was a continuation of the 1886 design, with a pistol grip, shorter magazine tube and round barrel, produced in only two variants, 24" and 20". This rifle is chambered in .348 WCF, the only cartridge the 71 was ever chambered for besides experimental models, and which was actually developed just for this model. The cartridge is great for North American big game hunting in brush where shorter shots are taken and with modern projectiles such as Hornady's Lever-evolution can now perform well at longer ranges, as well.

This rifle is in Fine condition as refinished with about 96% of its new metal finish remaining. The bore is mostly bright with sharp rifling and a little minor erosion. The stocks have some light wear consistent with infrequent use in the field. All of the Winchester rifles made before 1964 are prized by shooters and collectors alike, but the Model 71 was produced for 22 years, a relatively short production life for a Winchester, with fewer than 50,000 rifles made altogether. A model 71 in any condition will likely bring a lot of interest from the Winchester collectors and this example has a nice bore and strong mechanics. It would make for a nice shooter or addition to a collection. Please see our photos and good luck!

Make: Winchester

Model: 71

Serial Number: 32282

Year of Manufacture: 1951

Caliber: .348 WCF

Action Type: Lever Action with Tubular Magazine

Barrel Length: 24"

Sights / Optics: The front sight is a beaded blade dovetailed to a hooded, textured, ramped base forged to the barrel; the bead has been painted white. The rear sight dovetal is filled with a Williams blank. The left of the receiver is drilled and tapped with a Lyman 56 receiver sight installed, adjustable for windage and elevation.

Stock Configuration & Condition: The stocks are two-piece smooth walnut with a capped forend, pistol grip, straight comb and checkered steel shotgun-style buttplate. Sling swivels have been installed in the belly and the forend cap. The stocks have scattered light nicks, scuffs and scratches. There are no chips or cracks. The LOP measures 13 1/4" from the front of the trigger to the back of the buttplate. The plate has light wear on the heel and around the edges with some minor oxidation in the well defined checkering. Overall, the stocks are in Very Good condition.

Type of Finish: Blued

Finish Originality: Original

Bore Condition: The bore is mostly bright and the rifling is sharp. There is no erosion in the bore, but there is a little stubborn copper fouling. In this writer's opinion the bore rates 9 out of 10.

Overall Condition: This rifle retains about 96% of its metal finish. The finish is thinning at some edges. There are a few scattered light marks including light wear from the previously installed rear sight. The action shows light operational wear. The screw heads range from sharp to lightly tool marked with strong slots. The markings are clear. Overall, this rifle is in about Fine condition.

Mechanics: The action functions correctly. The hammer has a half-cock safety position. We have not fired this rifle. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.

Box, Paperwork & Accessories: A Winchester Model 71 hang-tag is included.

Our Assessment: This is a Winchester Model 71 rifle made in 1953. The Model 71 was a continuation of the 1886 design, with a pistol grip, shorter magazine tube and round barrel, produced in only two variants, 24" and 20". This rifle is chambered in .348 WCF, the only cartridge the 71 was ever chambered for besides experimental models, and which was actually developed just for this model. The cartridge is great for North American big game hunting in brush where shorter shots are taken and with modern projectiles such as Hornady's Lever-evolution can now perform well at longer ranges, as well.

This is an example of the model from post-war production. The rifle shows light wear consistent with some use in the field, limited actual firing, and proper maintenance. All of the Winchester rifles made before 1964 are prized by shooters and collectors alike, but the Model 71 was produced for 22 years, a relatively short production life for a Winchester, with fewer than 50,000 rifles made altogether. A model 71 in any condition will likely bring a lot of interest from the Winchester collectors and this example will surely be no exception. It should also still make for a wonderful hunting rifle. Please see our photos and good luck!