Pacific Auction Companies Auction Catalog - Machine Shop Business Liquidation June 2025 Online Auctions

Lincoln Handy Core Mig Welder

Lot #91 (Sale Order 1 of 172)

Flux core wire only. 110Volt. Comes with Kobalt and handheld masks, chipping hammer, brush, gloves. Tested and operable. West wall under stairs.

HAAS CNC Mill

Lot #92 (Sale Order 2 of 172)

Model 3 - Mfg. 8/1997 - Ser # 11431 - 208/220 3-phase - VF Series operating system - 20 tool capacity - 48" x 18" table. Run out is 0.00007. This unit is maintained & inspection regularly and runs smooth. The nitrogen tank was replaced in 2015. The PCU was replaced in 2012. The X ways were replaced 18 months ago. Must be picked up on June 24th between 10:00 & 2:00. A forklift will be available on this day and time.

Dewalt 20 Volt Lithium Cordless Drill

Lot #94 (Sale Order 3 of 172)

Excellent and operable with two lithium batteries, charger, bit kit and Dewalt bag. West wall, under stairs.

ANNOUNCEMENT

Lot #90 (Sale Order 4 of 172)

This will be a challenging load out due to the subject matter and PAC will be renting loading equipment. As such, we have allowed several days between auction close and pickup so that winning bidders may make adequate transportation arrangements.
WE WILL CALL ALL WINNING BIDDERS TO SCHEDULE LOAD OUT FOR MONDAY JUNE 23rd and TUESDAY JUNE 24th IN THE ORDER NECESSARY TO DO THIS. Pickup appointments will be Monday June 23rd and Tuesday June 24th. If you are not available to pickup on these dates, please do not bid. NO EXCEPTIONS.

PLEASE NOTE THAT ITEMS LEFT FOR LONGER THAN E SCHEDULED PICKUP DATES WILL BE CONSIDERED FORFEITED.

GUARANTEE. All property offered for sale is as is, where is. ALL SALES ARE FINAL. THERE WILL BE NO REFUNDS AND NO EXCHANGES. PAC does not guarantee or make warranties on any lot sold. Descriptions in the catalog are opinion. They are written as an aid to potential bidders. PAC acknowledges that there may be errors in the descriptions. PAC strongly recommends that you research any item you bid on or have an expert research the item. PAC will have no obligation, i.e., no refunds or returns will be accepted.

PAC cannot crate or ship large items however we are happy to work with the provider of your choosing.

FOR MORE IMPORTANT INFORMATION BE SURE TO READ OUR SPECIAL TERMS AND CONDITIONS BY CLICKING THE TAB AT THE TOP OF THIS CATALOG.

ANNOUNCEMENT

Lot #90.1 (Sale Order 5 of 172)

This will be a challenging load out with large heavy equipment that will require forklifts for loading and limited space to operate. . PAC is renting a forklift for loadout and appointments for pickup will be mandatory and not negotiable. We have allowed generous time between the closing of the auction and pickup dates so that you may make adequate arrangements.

Mill Accessories

Lot #95 (Sale Order 6 of 172)

Vise handles & jaws. Backing plates. Stops. NO SHIPPING. LOCAL PICK UP ONLY. Black shelf

Rockwell Model 14 Metal Cutting Band Saw

Lot #97 (Sale Order 7 of 172)

VG and operable. Freestanding, approx. 5' tall. 110 volt. Comes with extra blades. South wall, East corner.

CNC Cabinet

Lot #98 (Sale Order 8 of 172)

This cabinet was set up for the CNC but it will work for whatever you need. Includes all items in the photos. 80" tall x 49" wide x 20" deep. A forklift will only be available on June 23rd & 24th for loading.

Central Hydraulics 4 Ton Porta Power

Lot #100 (Sale Order 9 of 172)

Excellent condition, appears barely used in metal case. West Wall, Under stairs.

Lagun Knee Mill

Lot #101 (Sale Order 10 of 172)

Model FTV-2 - 220/440 3-phase - 3 H.P. motor - 9" x 48" table - Power feed - Tri-Onics DRO. Includes all items in photos. A forklift will only be available on June 23rd & 24th for loading. Tested operable

Three Storage Units

Lot #103 (Sale Order 11 of 172)

25"X59" tall poly storage unit, 26" Sterlite four drawer unit, 15" three drawer meal rolling cab. South Wall, east corner.

Mill Clamping Sets

Lot #104 (Sale Order 12 of 172)

Three sets & extras. Black shelf

Vermont Gauge Machinist's Pin Gauge Set

Lot #106 (Sale Order 13 of 172)

Excellent C series. From .251 to .500 in metal case with Certificate of Accuracy. South Wall Under Stairs.

Logan Lathe

Lot #107 (Sale Order 14 of 172)

Mfg. by Powermatic Houdaille Company - Model 2557L00H - Ser #88774 - Baldor 200 volt 3-phase - 2 H.P. - 30" between centers with 6" swing from center. This is a smooth feeling lathe with a few thousandths backlash. A forklift will only be available on June 23rd & 24th for loading.

Mainframe Housing

Lot #109 (Sale Order 15 of 172)

24" wide X71" tall X 24" deep. Includes components as shown. West Wall, East corner.

Starrett EDP-50443 98-12 Level

Lot #112 (Sale Order 16 of 172)

Excellent with box. West wall, under stairs.

Oil Rag Container

Lot #113 (Sale Order 17 of 172)

OSHA approved. Black shelf unit

Cool Industrial Kwick Way Sandblast Cabinet

Lot #115 (Sale Order 18 of 172)

Killer style and operable, currently in use. 110 Volt. Interior working area of 43-1/2" X 27". Exterior dimensions are 48" wide, 59" tall, 30" deep. Comes with dust collector, spare drums of silica. We will have forklift available for loading on June 23rd & 24th. South Wall Center.

Inserts

Lot #116 (Sale Order 19 of 172)

Assorted inserts. Black shelf

Milwaukee Heavy Duty Sawzall Reciprocating Saw and Three Corded Drills

Lot #118 (Sale Order 20 of 172)

All tested and operable. West Wall, under stairs.

Sony Bravia 65" Flatscreen Television

Lot #151 (Sale Order 21 of 172)

Excellent and operable with remote. Was used approx. five times at trade shows Center Row, bottom of stairs.

Takisawa Lathe

Lot #152 (Sale Order 22 of 172)

Model LX-1440 - Ser # CDE90178 - 220 3-phase - 7.5" swing from center - 39" between centers. Includes all items pictured. Tight lathe that operates smooth. A forklift will only be available on June 23rd & 24th for loading.

Corner Desk and Office Chair

Lot #154 (Sale Order 23 of 172)

Excellent 59"X59" Metal Edged Corner Desk with excellent chair and waste basket. Office #2.

Pneumatic Air Tools

Lot #155 (Sale Order 24 of 172)

Mixed manufacturers. All tested and operable. Includes 11 pieces. 1/2" Impacts, pad sander, 1/4" air rachet cut off tool and more. West Wall, under stairs in grey tub.

Chicago Electric Electric Winch

Lot #157 (Sale Order 25 of 172)

Excellent, tested and operable. 120 volt, 440/880 lb. West Wall, under stairs.

ANNOUNCEMENT

Lot #157.1 (Sale Order 26 of 172)

This will be a challenging load out with large heavy equipment that will require forklifts for loading and limited space to operate. . PAC is renting a forklift for loadout and appointments for pickup will be mandatory and not negotiable. We have allowed generous time between the closing of the auction and pickup days so that you may make adequate arrangements.

Ercolina Tube Bender

Lot #158 (Sale Order 27 of 172)

Model CE50/CE40 - 200/240 3-phase. Includes rollers & paperwork. Tested operable. A forklift will only be available on June 23rd & 24th for loading.

Dayton Vertical Belt Sander

Lot #160 (Sale Order 28 of 172)

Excellent and operable. 115/220 Volt. Currently in use and set at 115 volt. With spare belts and heavy steel 30" work Station. South Wall, center.

Two Metal Shop Cabinets

Lot #161 (Sale Order 29 of 172)

Two industrial 36"X6' shop cabs, One with keys. South Wall, South west corner.

Drill Bit Assortment

Lot #162 (Sale Order 30 of 172)

Assorted sizes. Box & 6 yellow tubs. Black shelf

Corner Desk and Office Chair

Lot #163 (Sale Order 31 of 172)

Excellent 59"X59" Metal Edged Corner Desk with excellent chair and waste basket. Office #1.

Arbor Press

Lot #164 (Sale Order 32 of 172)

This press isn't marked so I'm going to guess it's a 3 to 5 ton press with a metal stand. The ram is 1.5" wide, with 12.5" work height. Stand is 37" tall.

End Mills

Lot #165 (Sale Order 33 of 172)

Assortment of sizes & styles. Box & 11 plastic tubs. Black shelf

Mitutoyo 0924" Digital Caliper

Lot #166 (Sale Order 34 of 172)

Excellent and was recently in use. Comes with wooden case, instructions and Certificate of calibration. West Wall, under stairs.

Bench Grinder on Stand

Lot #167 (Sale Order 35 of 172)

I believe this is a Dayton by the tag but it is illegible so sold as unknown. 110 volt. Smooooth!. Smooth hum when running and continues to go and go and go and go after turning off. Comes on metal stand. West wall, SW corner.

Work Bench

Lot #168 (Sale Order 36 of 172)

Metal frame & wood top. 73" x 30" wide x 34" tall. Includes power pole mounted on the top. Items on bench NOT included. A forklift will only be available on June 23rd & 24th for loading.

Power Tools

Lot #169 (Sale Order 37 of 172)

Black And Decker 9" grinder, Craftsman circular saw, Chicago Electric 4" grinder, Surebonder Glue gun, no battery or charger, Soldering irons, All tested and operable, West wall, under stairs in blue tub.

Chicago Power Tools Bench Grinder

Lot #170 (Sale Order 38 of 172)

Model 9020 - 110/220 single phase - 2 H.P. - Grinder tested operable. Wood bench

Grinder Wheels

Lot #171 (Sale Order 39 of 172)

Assortment. Wood bench

Four Metal Shelves

Lot #172 (Sale Order 40 of 172)

Two tan and one black. CONTENTS ARE NOT INCLUDED!. Tan 48" shelf by shop entry door, two black 48" units in shop bay rows, tan 48" in North bay.

Brake, Aluminum Polishing Kit, Heat Gun and Makita Drill

Lot #173 (Sale Order 41 of 172)

30" Light duty Central Pneumatic metal brake, Open Aluminum Polishing Kit, Milwaukee 18V drill, No Charger, Green heat gun. West wall under stairs, black tub.

Tap Assortment

Lot #174 (Sale Order 42 of 172)

Metric & standard. Black shelf

Corner Desk

Lot #175 (Sale Order 43 of 172)

Excellent approx. 59'X59". Office #2.

Wood Work Bench

Lot #176 (Sale Order 44 of 172)

Heavy built bench is 80" long x 36" wide x 36" tall. Items on bench NOT included. A forklift will only be available on June 23rd & 24th for loading.

Reamer Assortment

Lot #177 (Sale Order 45 of 172)

Assorted sizes. Black shelf

Dremel, Sander, Cut Off Saw and Heat Gun

Lot #178 (Sale Order 46 of 172)

Dremel cordless tool with battery and charger in case, Milwaukee heat gun, Drill Master 2" benchtop cut off saw, Dewalt pad sander. All tested and operable. West wall, under stairs in black tub.

Metro Cart With Office Goods

Lot #179 (Sale Order 47 of 172)

46" Metro cart on casters loaded with office supplies, paper cutter, hole punch, folding chair, trash can. Office, by shop entrance.

Kanon Vernier Height Gauge

Lot #180 (Sale Order 48 of 172)

24" height. Base plates & accessories. Black shelf

Fowler I.D. Gauge

Lot #182 (Sale Order 49 of 172)

1.5" to 2.5" I.D. Black shelf

Tubing Bender

Lot #185 (Sale Order 50 of 172)

Central Pneumatic 12 ton hydraulic bender with heads. Main Shop, North row, west end.

Assortment of Cutters

Lot #188 (Sale Order 51 of 172)

Center drill. Spot drills. Corner rounders. Counter sinks. Boring bars. Counter bores. Key cutters. Slitting blades. 10 plastic tubs. Black shelf

Machinist's Parallel Bars Angle Gauges and Gauge Blocks

Lot #191 (Sale Order 52 of 172)

Seven sets of well-cared for machinist's tools. West wall, under stairs in grey tub.

Digital Protractor

Lot #194 (Sale Order 53 of 172)

Model Pro 360. Tested operable. Black shelf

Corner Desk and Office Chair

Lot #197 (Sale Order 54 of 172)

Excellent 59"X59" metal edged corner desk with office chair. Office #3.

NSK Depth Micrometer

Lot #200 (Sale Order 55 of 172)

0" to 4" depth. Black shelf

ANNOUNCEMENT

Lot #200.1 (Sale Order 56 of 172)

This will be a challenging load out with large heavy equipment that will require forklifts for loading and limited space to operate. . PAC is renting a forklift for loadout and appointments for pickup will be mandatory and not negotiable. We have allowed

Loaded Gerstner Machinist's Tool Box

Lot #203 (Sale Order 57 of 172)

Great vintage oak 20' Box loaded and as shown. West Wall, Under stairs.

Mitutoyo Bevel Protractor

Lot #206 (Sale Order 58 of 172)

Series 187. Black shelf

Ridgid Shop Vac

Lot #209 (Sale Order 59 of 172)

Excellent and operable. With water pump pickup kit, spare filter, hoses etc. Main shop, North Row, West end,

Metal Rolling Shop Cart

Lot #212 (Sale Order 60 of 172)

Heavy and duty industrial cart on metal casters. 32"X18"X30" tall. South wall, SW corner.

Tapmatic

Lot #215 (Sale Order 61 of 172)

30X. Includes wrenches. Black shelf

Poly Picnic Bench

Lot #218 (Sale Order 62 of 172)

Excellent folding 6' picnic Bench. Entrance Foyer.

5C Collet Attachments

Lot #221 (Sale Order 63 of 172)

3-jaw chuck. Yuasa collet index fixtures. Black shelf

Steel Welding Table

Lot #224 (Sale Order 64 of 172)

32"X28" 3/4" thick steel top. On metal casters. South Wall, SW corner.

Metal Ring Roller

Lot #227 (Sale Order 65 of 172)

Turns & adjust. Black shelf

Hawkeye Precision Bore Scope

Lot #230 (Sale Order 66 of 172)

Excellent and operable in box with manual. 16" max. West wall, under stairs.

Fowler & Blake Coaxial Indicators

Lot #233 (Sale Order 67 of 172)

Complete kits. Black shelf

Blue Large Air Tire Hand truck

Lot #236 (Sale Order 68 of 172)

For those times you want to offroad something really awkward! South Wall, SW corner.

Analog Force Gauge

Lot #239 (Sale Order 69 of 172)

Model NK-50. 50 Newton capacity. Black shelf

Delta 40-560 Scroll Saw

Lot #241 (Sale Order 70 of 172)

Tested and operable two-speed 16" Benchtop scroll saw. Dusty, needs new blade. South Wall, SW corner.

Rolling Metal Shop Cart

Lot #242 (Sale Order 71 of 172)

Industrial 36"X24" Rollin cart on casters. 450 lb. capacity. Main shop, South Row, end.

Dial Indicators

Lot #243 (Sale Order 72 of 172)

Three indicators. Black shelf

Clamps and More Clamps

Lot #244 (Sale Order 73 of 172)

Six poly tubs loaded with C clamps, welding clamps, squeeze clamps and more. West wall bottom of tan shelf by entry.

Haskins Tap Head

Lot #245 (Sale Order 74 of 172)

No. 2. Model A-22. Black shelf

Insert Tool

Lot #246 (Sale Order 75 of 172)

Tool & inserts. Black shelf

Two Loaded Organizers

Lot #247 (Sale Order 76 of 172)

Loads of Helicoil inserts, bushings and more. West wall, tan shelf by entry.

Industrial Work Bench

Lot #248 (Sale Order 77 of 172)

4'X8" with carpeted wood top and metal base. Has outlet mast. Contents on top are NOT included. Main shop, south row, west end.

Pin Gauge Sets

Lot #249 (Sale Order 78 of 172)

.061 to .250. 1 to 60 number set. Custom set. Black shelf

Three Machinist's Drill Indexes

Lot #250 (Sale Order 79 of 172)

Three metal multi drawer units loaded with bits. West wall, tan shelf by door.

Horizontal Mill Attachment

Lot #251 (Sale Order 80 of 172)

Black shelf

Mitutoyo Bevel Protractor

Lot #252 (Sale Order 81 of 172)

Black shelf

HP Monitors and Printer

Lot #253 (Sale Order 82 of 172)

Two Excellent and operable flatscreen computer monitors. Were removed from in use offices. HP Envy 6455E printer, also was in use when removed for cataloging. Entry foyer.

Loaded Yellow Parts Organizers

Lot #254 (Sale Order 83 of 172)

Ten yellow approx. 13" 9" organizers with lids. Loads of brass inserts, grommets, strain relief bushings etc. Main shop, top of rolling aluminum table.

Squares & Levels

Lot #255 (Sale Order 84 of 172)

Keep your life square, level & plum at all times. 4' level tested good. Black shelf

Loaded Drill Indexes

Lot #256 (Sale Order 85 of 172)

Eight indexes with fractional and letter metal bits. West wall, carboard box on floor by tan shelf/entry.

Catch All Lot

Lot #257 (Sale Order 86 of 172)

A little bit of everything. Black shelf

MHC 5C Spin Index Head

Lot #258 (Sale Order 87 of 172)

Model PF70/5C. Black shelf

Cork Boards

Lot #259 (Sale Order 88 of 172)

Two new/like new Quartet 6'X48" aluminum frame cork boards. Main shop, center row, backside of drawer units.

Loaded Organizers

Lot #260 (Sale Order 89 of 172)

Ten yellow organizer trays and four organizer kits. Brass fittings, nylon strain relief bushings, roll pins and more. Main Shop, top of aluminum rolling table.

Schmid Boring Head

Lot #261 (Sale Order 90 of 172)

1" arbor. Black shelf

Hanging Scales

Lot #262 (Sale Order 91 of 172)

Five hanging scales. Everything from a 0-500 lb. Chatillon to 0-25 lb. pocket scale. Main shop, west wall, floor by tan shelf/entry.

Mill Table Vise

Lot #263 (Sale Order 92 of 172)

7.5" jaws. Black shelf

Bor-Tru Boring Head

Lot #264 (Sale Order 93 of 172)

3/4" arbor Black shelf

Aluminum Rolling Shop Table

Lot #265 (Sale Order 94 of 172)

45"X31"X3/4" top, Claimed to be flat within .002. With aluminum legs and on casters. 27" working height. Contents on Top Are NOT included. Main Shop, South Row, center.

Rolling Shop Stairs

Lot #266 (Sale Order 95 of 172)

Rolling four-step unit with approx. 40" top step, Steel with pierced steel steps. Main shop, south row.

$Refractometers$ $Refractometers$

Refractometers

Lot #267 (Sale Order 96 of 172)

Two units. Black shelf

Naples Cablewire Crimper

Lot #268 (Sale Order 97 of 172)

Excellent in box crimper with some cable ends and bend pieces. Main shop, west wall, floor by entry.

Base Assortment

Lot #269 (Sale Order 98 of 172)

Two magnetic. Surface block & accessories. Black shelf

Parker Charging & Gauging Unit

Lot #270 (Sale Order 99 of 172)

This unit is in great shape but I have no way to test it. Black shelf

Taps and Dies

Lot #271 (Sale Order 100 of 172)

Monster assortment of taps, dies, handles. Main shop. Floor by entry.

Pro Jet Finisher Oven with Eastwood Powder Coating

Lot #272 (Sale Order 101 of 172)

120 volt drying oven, 400 degree max with digital temp control. Eastwood DIY Powder Coating System with several partial bottles of powder. North shop bay, north wall.

X & Y Table

Lot #273 (Sale Order 102 of 172)

Fits on a drill press to perform milling. Black shelf

Metal Lateral Drawer Unit with Hardware

Lot #274 (Sale Order 103 of 172)

53" wide, 40" deep, 36'' print file cab loaded with misc. hardware. Main Shop, center, west end.

Steel Tool Work Station Base

Lot #275 (Sale Order 104 of 172)

Heavy and Duty, 34.5" tall with 24"X9" top. North bay, east by roll up door.

Mill Table Plate

Lot #276 (Sale Order 105 of 172)

16" wide x 12" & 9" tall. Black shelf

Wooden Drawer Unit with Sanding Supplies

Lot #277 (Sale Order 106 of 172)

28" wide, 18" deep, 16" tall. Loaded with sandpaper, rolls etc. Center row, top of metal cab on west end.

Metal Shop Cabinet

Lot #278 (Sale Order 107 of 172)

36"X6' industrial shop cab with lock and key. North shop bay, north wall, center.

Mitutoyo Digital Calipers

Lot #279 (Sale Order 108 of 172)

8" & 12". Both power up. Black shelf

Metal Lateral Drawer Unit with Hardware

Lot #280 (Sale Order 109 of 172)

53" wide, 40" deep, 36'' print file cab loaded with misc. hardware. Main Shop, center, west end.

Steel Tool Work Station Base

Lot #281 (Sale Order 110 of 172)

Heavy and Duty. 33" tall with 18.5"X13" top. North Bay, by East roll up door.

Dial & Digital Calipers

Lot #282 (Sale Order 111 of 172)

6" models. Digitals power up. Black shelf

Granite Inspection Plate and Steel Working Surface

Lot #283 (Sale Order 112 of 172)

24"X18"X3" inspection surface, Cracked across one end but still very usable, steel working surface. Main shop, top of metal cab, west end.

Lifetime Poly Folding Table

Lot #284 (Sale Order 113 of 172)

8' folding poly table. North shop bay, north wall, center.

Mitutoyo Dial Calipers

Lot #285 (Sale Order 114 of 172)

8" models. Black shelf

Aluminum and Delrin Stock Organizer Bins

Lot #286 (Sale Order 115 of 172)

Fifteen green steel organizer bins loaded with aluminum and Delrin plus pallet load in front. Main shop, center row, middle.

Steel Tool Work Station Base

Lot #287 (Sale Order 116 of 172)

Heavy and duty, 37" tall. 20"X14" column with storage area. North Bay, By east roll up door.

Starrett Dial Caliper

Lot #288 (Sale Order 117 of 172)

6" model. Black shelf

Organizers, Rivet Guns, Wire and Hardware

Lot #289 (Sale Order 118 of 172)

Steel nine-drawer 34" with rivet guns and misc. shop supplies, two yellow organizers with rivets, Two red 18-drawer poly organizers with sheet metal bolts, pan heads, snap rings etc. Box with springs, three shop magnets, two rolls with wire. Center row, back side of black metal cab.

Werner Step Ladder

Lot #290 (Sale Order 119 of 172)

Excellent 10' with 300# capacity and non electrical conducting side rails. North shop bay, north wall.

VIS & Fowler Micrometers

Lot #291 (Sale Order 120 of 172)

Two 0" to 1". One 1" to 2". One 2" to 3". Black shelf

Extension Cords

Lot #292 (Sale Order 121 of 172)

Pro reel retractable unit with 65' cord, box with misc. cords. Main shop, west side, backside of black shelves.

Safety Work Stands

Lot #293 (Sale Order 122 of 172)

Two 2-ton adjustable height orange steel work stands. Approx 49" to 93" working range. North Shop bay, east side by roll up door.

Dino-Lite Digital Microscope

Lot #294 (Sale Order 123 of 172)

I couldn't hook this up to my phone so I couldn't test it but it looks new. Black shelf

Uline Eye Wash Station

Lot #295 (Sale Order 124 of 172)

Like new/new. No fluids. Main shop, west side, back of black shelves.

Yellow Flammables Cabinet

Lot #296 (Sale Order 125 of 172)

44" wide, 44" tall, 18" deep. With Key. North Shop bay, NE corner.

Blocks

Lot #297 (Sale Order 126 of 172)

123 blocks. V blocks. Vise. Black shelf

Work Bench

Lot #298 (Sale Order 127 of 172)

6'X30" industrial work bench with steel base and sealed wooden top. Contents on top are NOT included. North shop bay, north wall.

Grey Shop Cabinet

Lot #299 (Sale Order 128 of 172)

24"X78"X18" with Flammable sign. North shop bay, NE corner.

Machinist Lot

Lot #300 (Sale Order 129 of 172)

Parallel bars. 5" sine bar. Thread & thickness gauges. Center/edge finders. Black shelf

Two Helping Hand Rolling Work stands

Lot #331 (Sale Order 130 of 172)

Two adjustable height work stations with roller tops. North Shop Bay, By east roll up door.

Two Digital Scales

Lot #332 (Sale Order 131 of 172)

Zieis digital postal scale with oversized plate attached, 35 lb. capacity and Lyman Micro Touch 1500 reloaders scale. North shop bay, center wall.

Folding Ladder

Lot #333 (Sale Order 132 of 172)

Aluminum multi position ladder. North shop bay, east side by roll up door.

Brown & Sharpe/Mitutoyo Micrometers

Lot #334 (Sale Order 133 of 172)

0" to 1" micrometers. Black shelf

Air Tank, Rolling Shop Stool and Wooden Saw Horses

Lot #335 (Sale Order 134 of 172)

North Bay, by East roll up door.

Phase II Arbor Press

Lot #336 (Sale Order 135 of 172)

1/2 ton, 3-3/4" throw. North Shop Bay, Center Wall.

Poly Organizers with Shelf

Lot #337 (Sale Order 136 of 172)

Includes 53 stacking bins of varying sizes with small black poly shelf. North bay, center row.

Telescoping I.D. Gauges

Lot #338 (Sale Order 137 of 172)

One Mitutoyo set & China set. Black shelf

Two Rolling Carts

Lot #339 (Sale Order 138 of 172)

Red flat cart, approx. 54"X27" plus smaller folding rolling cart. North shop bay, center row.

Machinist's Vice

Lot #340 (Sale Order 139 of 172)

Small Japan Drill press or mill vice. North Shop Bay, center wall.

Warehouse Supplies

Lot #341 (Sale Order 140 of 172)

Uline Mini wrap, no handle insert, poly tubing, Uline Caution or gaffing tape. North shop bay, center row.

Dial Indicators & Mill Attachments

Lot #342 (Sale Order 141 of 172)

Two indicators appear new. Black shelf

Dayton Tradesman 3Z360G Power Hacksaw

Lot #343 (Sale Order 142 of 172)

Tested and operable. 120 volt. North shop bay, Center wall.

Measuring Lot

Lot #344 (Sale Order 143 of 172)

Starrett center finder set. Pee Dee thread wires. MSC & Fowler radius gauges. Black shelf

Craftsman "100" Table Saw

Lot #345 (Sale Order 144 of 172)

Tested and operable. 50"X20" steel table with fences and jigs. 110 volt. North shop bay, center wall.

Mitutoyo Outside Mechanical Groove Micrometer

Lot #346 (Sale Order 145 of 172)

0" to 1" micrometers. Black shelf

Sears Craftsman 12" Radial Arm Saw

Lot #347 (Sale Order 146 of 172)

Tested and operable. North Shop bay, center wall.

Stainless Rulers and Straight Edges

Lot #348 (Sale Order 147 of 172)

Stainless edges in 36" and 60 ", two 36" rulers, unmarked 40"aluminum straight edge. North shop bay, center wall.

Craftsman Tool Box Base

Lot #349 (Sale Order 148 of 172)

27" five-drawer rolling base with work surface top. North shop bay, center wall.

Ringmaster Bore Ring Gauges

Lot #350 (Sale Order 149 of 172)

2.000, 1.000, 0.6250, 0.5625, 0.4375 & 0.3125 gauges. Black shelf

Microscope

Lot #351 (Sale Order 150 of 172)

Unknown maker, tested and operable was in use for Quality inspection. North Shop Bay, center wall,

Arbor Press

Lot #352 (Sale Order 151 of 172)

Approx 1/2 ton. Unbranded. 3-3/4" throw. North shop bay, center wall.

Micro Vu 500 HP Comparator Inspection Scope

Lot #353 (Sale Order 152 of 172)

Tested and operable, recently in use. North Shop bay, Center wall.

Bore Micrometers

Lot #354 (Sale Order 153 of 172)

Brown & Sharpe 0.800 to 1.000. Brown & Sharpe 0.425 to 0.500. Tesa 0.600 to 0.800. SPI 0.500 to 0.650. SPI 0.275 to 0.350. Black shelf

Dial Indicators & Micrometer

Lot #355 (Sale Order 154 of 172)

Accupro 0" to 1" blade micrometer. Mitutoyo 0.001 & 0.0005 indicators. Black shelf

Industrial Work Table

Lot #356 (Sale Order 155 of 172)

4'X8' with carpeted wood top and steel base. 32-1/2" working height. With one drawer. North shop bay, center wall.

Deburring Tools

Lot #357 (Sale Order 156 of 172)

Ten deburring tools with five spare cutter heads. North shop bay, center wall.

Punches and Drifts

Lot #358 (Sale Order 157 of 172)

Number and letter sets, drifts, center punches, cold chisels and more. North shop bay, center wall in blue tub.

Mercer Extra Long Poly Bag Sealer

Lot #359 (Sale Order 158 of 172)

115 volt, 32" heating surface. Heats up, did not test fully. North shop bay, center wall.

Torque Wrenches

Lot #360 (Sale Order 159 of 172)

Pittsburg 3/8" click stop ft lb., Husky 1/4" drive inch lb., Armstrong 1/4" centimeter/Kilo, Four beam type. North shop bay, center row.

Machinist's, Tool Manufacturing and Plastics Manuals

Lot #391 (Sale Order 160 of 172)

Fifteen volumes on manufacturing, Tool making, plastics and more. North Shop Bay, center wall. In box by door.

Big Wrenches

Lot #392 (Sale Order 161 of 172)

Includes 27 wrenches. From 2" down to 3/8". All SAE. North Shop bay, center wall by door.

If I Had a Hammer

Lot #393 (Sale Order 162 of 172)

Includes 19 hammers. North shop bay, center wall by door.

Allen Wrenches and Nut Drivers

Lot #394 (Sale Order 163 of 172)

Bondhus, Allen and other hex key set makes and loose tools Set of red handled SAE nut drivers. North Shop bay, center wall by door.

Tool Assortment

Lot #395 (Sale Order 164 of 172)

Spanner wrenches, hack saws, pipe wrench, pry bars, spare blades. North shop bay, center wall by door.

Hand Tools

Lot #396 (Sale Order 165 of 172)

Adjustable wrenches, pliers, side cutters, snap ring pliers, spreader pliers and more. North shop bay, center wall by door.

Sennheiser Studio and Live Headphones HD 280 Pro

Lot #397 (Sale Order 166 of 172)

Five pairs, New old stock. North bay, center wall by door.

Optoma Projection Display

Lot #398 (Sale Order 167 of 172)

Model EP721. Includes connectors, remote & carry bag. Black shelf

Hand Tools

Lot #399 (Sale Order 168 of 172)

Small red tool box with new/like new screwdrivers, Husky Hex key set, misc. electrical testers, multimeter, Staedtler compass, squeeze clamps. North shop bay, center wall by door.

Wrenches and Files

Lot #400 (Sale Order 169 of 172)

Great assortment. Approx 55 wrenches, most or all SAE, misc. manufacturers, 30 machinist's files. North shop bay, center wall, by door.

Snap On and Kanon Torque Wrenches plus Bits Sockets and Tips

Lot #401 (Sale Order 170 of 172)

1/4" Snap On T0S1FUA in case, Snap On 1/4" Inch Pound Dial Torque wrench, Two Kanon, Misc bags of bits, tips and more. North Shop bay, center wall by door, grey poly tub.

Shelf Unit With Organizers

Lot #420 (Sale Order 171 of 172)

Organizers are full of fasteners. If you can't fix it with what's in here you can't! Shelf unit is 8.5 feet tall x 36" wide x18" deep. There are two organizers per shelf and are removable. Includes box of fasteners in front of organizer. NO SHIPPING. LOCAL PICK UP ONLY. BRING FRIENDS & A 1 TON TRUCK.

ANNOUNCEMENT

Lot #999 (Sale Order 172 of 172)

Thanks for your business and we hope your bids were successful. This will be a challenging load out with large heavy equipment that will require forklifts for loading and limited space to operate. . PAC is renting a forklift for load out and appointments for pickup will be mandatory and not negotiable. We have allowed generous time between the closing of the auction and pickup dates so that you may make adequate arrangements.


Machine Shop Business Liquidation June 2025
Industrial Machinery & Equipment > Pacific Auction Companies > Machine Shop Business Liquidation June 2025
Machine Shop Business Liquidation June 2025
by Pacific Auction Companies Event Begins: Thursday, May 29, 9:58 AM Mountain First lots ends Monday, June 16, 6:00 PM Mountain Last lot ends Monday, June 16, 8:51 PM Mountain PAC is excited to present our latest liquidation sale featuring exceptionally clean and well maintained machine shop and office items. Highlights include Lathe, Mill, CNC Machine, Tooling, Tubing Benders, Welder and Welding Tables, Sand Blast Cabinet, Grinders, Wood Shop, Machinists Tools, Hand Tools, Office Equipment and more. This super clean and well maintained lineup will have offsite pickup in Windsor Colorado. This will be a challenging load out due to the subject matter and PAC will be renting loading equipment. As such, we have allowed several days between auction close and pickup so that winning bidders may make adequate transportation arrangements. WE WILL CALL ALL WINNING BIDDERS TO SCHEDULE LOAD OUT FOR MONDAY JUNE 23rd and TUESDAY JUNE 24th IN THE ORDER NECESSARY TO DO THIS. Pickup appointments will be Monday June 23rd and Tuesday June 24th. If you are not available to pickup on these dates, please do not bid. NO EXCEPTIONS.