Fine Woodwork Shop - North County - ONLINE ONLY!!!

Fine Woodwork Shop - North County - ONLINE ONLY!!!

Auction closed.
Auction closed.
Fine Woodwork Shop - North County - ONLINE ONLY!!!

Fine Woodwork Shop - North County - ONLINE ONLY!!!

Auction closed.
Auction closed.
Internet Premium: 15%
See Special Terms for additional fees
Cash Payment Discount: 3%
Share:

Description

Fine custom woodwork shop.

Lot Location:

All lots are located at event location
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 13

Closed Lots

8ft Custom Handmade Aluminum Retro Teardrop Prototype Trailer with Full Kitchenette/Sleeping Cabin

Lot # 1      

PLEASE NOTE: TRAILER DOES NOT HAVE A V.I.N. AND WILL NEED TO BE REGISTERED BY NEW OWNER USING THE DMV HOME KIT AND APPLICATION. INSTRUCTIONS WILL BE INCLUDED. ALL LEGAL REQUIRMENTS AND FEES ARE RESPONSIBILITY OF BIDDER. SOLD AS IS WHERE IS***
Build Completed in 2016 by Expert Artisan Woodworking Craftsman, so the attention to detail is exquisite. Handmade Teardrop Trailer Prototype outfitted with a full stainless steel kitchenette. Includes built in stove, with front mounted propane tank, sink, drawers, and popup end grain cutting table. Cabin and kitchen are lighted via battery run push button lights. Drawers and storage in sleeping cabin.

Additional highlights: Lightweight Approximately 1,000 lbs. Trailer Lights, Side Markers, Full Moon Hubcaps, Full Size Spare Tire, Door, Tinted Windows, Custom Foam Mattress... much more.
 
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to N****a! to YOU!

Placing your bid. please wait...

Grizzly G1023RL - 10" 3 HP 240V Cabinet Table Saw*** $1639

Lot # 3B      

PLEASE NOTE: ***THIS ITEM IS VERY LARGE AND HEAVY***THERE WILL BE A FORKLIFT FOR HIRE ON A CASE BY CASE BASIS PAID FOR BY WINNING BIDDER IF WANTED/NEEDED***THESE TERMS WILL BE NEGOTIATED ON DAY OF CHECKOUT WITH FORKLIFT OWNER/OPERATOR FOR ADDITITIONAL FEES***PLEASE ATTEND PREVIEW FOR FURTHER DETAILS***
Heavy Duty Grizzly G1023RL - 10in 3 HP 240V Cabinet Table Saw. Full maintenance and lubrication has been completed within 30 days. All vertical & horizontal gearing replaced.
Blade wrenches and spare parts included
Motor: 3 HP, 240V, single-phase, 14A
Rip capacity: 32in right, 14in left of blade
Max. depth of cut @ 90...: 3in
Max. depth of cut @ 45...: 2-1/8in
Assembled table size: 40in W x 27in D
Distance from front of table to center of blade: 17in
Floor-to-table height: 34in
Arbor diameter: 5/8in
Arbor speed: 4200 RPM
Max. width of dado: 13/16in
Overall dimensions: 66in W x 47in D x 39-3/4in H
Footprint: 20-1/2in x 20-1/2in

$1639
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 700.00

You've been outbid  to t****2! to YOU!

Placing your bid. please wait...

Delta 10in Sliding Table Saw *Huge Cutting Surface w/Expandable Table & Slider*

Lot # 3A      

PLEASE NOTE: ***THIS ITEM IS VERY LARGE AND HEAVY***THERE WILL BE A FORKLIFT FOR HIRE ON A CASE BY CASE BASIS PAID FOR BY WINNING BIDDER IF WANTED/NEEDED***THESE TERMS WILL BE NEGOTIATED ON DAY OF CHECKOUT WITH FORKLIFT OWNER/OPERATOR FOR ADDITITIONAL FEES***PLEASE ATTEND PREVIEW FOR FURTHER DETAILS***
Model 36-725
Fully customized sliding table saw. Massive cutting surface measuring 39in deep by 80in wide!! Additionally, there is an attachable expansion table that will add another 36in of depth behind the blade for extra long cuts with wide boards or jig attachments. With the expansion table attached, the total table top measures a massive 80in Wide X 75in Deep!!

Delta #36-725 - 10in 13-Amp Motor
4x Miter slots along the table allow for an infinite number of setups and jig attachments.
Large slider measures 48in Wide X 56in Deep!
Custom built sliding attachment allows you to cut with stability and repeatability. Slider has 5 adjustable clamps for holding work in place and push handles to glide the slider along the table top.
Table comes with heavy duty feet levelers to lower when cutting for solid surface on all floors including uneven concrete.
1200 LB 360 degree rolling casters allow you to move the entire table with hardly any effort!
Total cost over $2599
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 450.00

You've been outbid  to j****b! to YOU!

Placing your bid. please wait...

EKKO Electric Stacker 10ft Lift and 2640lbs Capacity with Built-In Charger

Lot # 2      

PLEASE NOTE: ***THIS ITEM IS VERY LARGE AND HEAVY***THERE WILL BE A FORKLIFT FOR HIRE ON A CASE BY CASE BASIS PAID FOR BY WINNING BIDDER IF WANTED/NEEDED***THESE TERMS WILL BE NEGOTIATED ON DAY OF CHECKOUT WITH FORKLIFT OWNER/OPERATOR FOR ADDITITIONAL FEES***PLEASE ATTEND PREVIEW FOR FURTHER DETAILS***
Model: EB12E
***Like New***
***Less than 50 hrs of use***
***Retail: $5499***
Load Capacity 2640 lbs
Raised Height 119.4in (9.95ft)
Adjustable Forks 8.3-33.5in
Adjustable Legs 45.7-59.1in
Fork Length 45.3in
Curtis Controller
24V Drive Motor
24V Lift Motor
Internal Charger
Battery 2*12V/100Ah Included
Polyurethane Wheels
Ergonomic Handle and Controls
Steel Construction
Robotic Welding
Charger Included

The EKKO EB12E Electric Straddle Stacker is designed with the combination of the versatility of forklift, reach truck and a walkie stacker. It is ideal for loading and unloading trucks, loading docks, stock rooms, manufacturing floors and warehousing.

Made from high quality steel and components with durable quality drives to withstand any terrain, usage, impact and directional changes for the use of any application with confidence and assurance.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,900.00

You've been outbid  to M****s! to YOU!

Placing your bid. please wait...

Fuji Spray 2 Quart Pressure Pot HVLP 5432 with 6? Air Hose ***$269***

Lot # 4A      

This 2Qt. Pressure Pot Assembly Kit has everything you need to add additional material capacity using your 4 or 5-stage Fuji Spray HVLP System.

Features:

No need for bulky compressor. The Fuji Spray 4 or 5-stage turbine pressurizes the 2Qt. cup.
Ability to spray at any angle, including upside down.
Twice as much material capacity than your bottom feed spray gun, and more than three times the capacity of your gravity feed spray gun.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 95.00

You've been outbid  to m****e! to YOU!

Placing your bid. please wait...

Fuji Industrial Spray Equipment 3005-T70 Q5 Platinum Quiet HVLP Spray System***$1399

Lot # 4      

***Like New! Powerful 5-stage turbine HVLP system by Fuji Spray***
**$1399**

5-stage turbine produces 9.5 psi, featuring variable speed control dial allows user to adjust motor speed
Quiet turbine - patented noise reduction feature and heat dissipation chamber (HDC)
Professional spray gun features convenient side pattern control knob to adjust size of fan pattern from small to large
25 ft. hose includes air control valve to reduce overspray and bounce back

The Q5 PLATINUM is the most powerful Fuji Spray System. This 5-stage Turbine motor develops approximately 9.5 psi The additional power allows the user to apply their finish faster and with less time spent on preparation of materials. Incorporated into its design is a proprietary Heat Dissipation Chamber (HDC). The HDC expels excess heat from the turbine resulting in much cooler operating temperatures. Less heat translates to longer motor life for your turbine. Supplied with the Fuji T-70 Non-bleed Spray Gun with Pattern Control Knob - the fan size is adjustable from small to large and everything in between (fully incremental). The Fuji T-70 is also equipped with a 1 qt. Bottom Feed Cup. The standard Air cap set is the general purpose #3 (1.3 mm) for fine finishing with lacquers, enamels, polyurethanes, latex, water-based coatings and more. Easy to maintain. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. Complete system includes the Q5 PLATINUM Turbine, T-Series Spray Gun with Cup, 25 ft. Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, Cleaning Brush, and the 5-for-5 Bonus Kit which consists of a 6 ft. Whip Hose, Wet Film Gauge, 19-pc Spray Gun Cleaning and Maintenance Kit with Lubricant, Extra Turbine Filter, and Always Measure Booklet - Record your material preparation and results.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 750.00

You've been outbid  to T****k! to YOU!

Placing your bid. please wait...

3M PPS Disposable Paint System Type H/O Pressure Cups *** 28 oz. *** 6 oz.

Lot # 4D      

28 fl. oz. and 6 fl. oz. H/O pressure cups includes inner disposable liners with, caps, and gun adapter.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 30.00

You've been outbid  to R****n! to YOU!

Placing your bid. please wait...

Delta 1 1/2 HP Powerful 120/240 Volt Dust Collector #59-767 Dual 4" Hose Ports

Lot # 7      

This 1-1/2-HP dust collector delivers powerful dust collection exactly where you need it and when you need it. With two stock 4? intake ports and easy portability you?ll be able to move around to all your machines and keep the shop dust free. The standard two micron filtration bags keep you safer and your shop cleaner. The powerful TEFC induction motor will be a workhorse in your shop allowing you to spend more time on projects and less time on sweeping up dust.
***$509***

Horsepower: 1-1/2-HP
Voltage: 120/240V (Wired 120V)
Hertz: 60-Hz
Phase: 1-Phase
Impeller Diameter: 11-1/2"
Maximum Static Pressure: 8? of water
Chip Bag Area: 2.4 cu ft (67 L)
Length: 42-1/2?
Shipping Weight: 106 lbs.
Max CFM: 1500-CFM
Standard Bag Filtration: 2-Micron
Filter Bag Area: 20-1/2 sq ft, 1.9 sq m
Width: 24-1/2?
Height: 92-1/2?
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 300.00

You've been outbid  to M****s! to YOU!

Placing your bid. please wait...

Jet 14" Band Saw 3 HP 240 Volt*Like New*Laguna Resaw King 3/4 Blade PLUS Mobile Rolling Stand

Lot # 5      

Jet - 14" Bandsaw with Steel Frame, Model JWBS-14SF-3
***Also Includes***
Laguna - Resaw King Bandsaw Blade 3 / 4" x 125"
Heavy Duty Mobile Base - Adjustable Steps
Upgraded Polyurethane Wheel Tires
***$2153***


Motor: 3 HP, 1 Ph, 230 V, 15/7.5 Amps
13-1/2" of resaw capacity
Cutting capacity width (In.): 13-1/2
Cutting capacity height (In.): 13-1/2
Blade length (In.): 125
Blade speed (SFPM): 3000
Table size (L x W) (In.): 21-1/2 x 16
Blade width (In.): 1/2
Redesigned fence with laser etched scale and micro-adjust feature
Two-position faceplate provides appropriate support for every cut
Tool-less guide adjustments
Conveniently located dual dust collection ports
Sturdy wheels feature a shallow crown and polyurethane tires
Heavy duty tensioning with quick release
Four sided blade guard
Blades can be removed out the front of the table, no bending or angling required
Round table insert features leveling screws for precise adjustment
Maximum saw blade width (In.): 3/4
Minimum saw blade width (In.): 1/8
Table tilt (Deg.): 45 right/10 Left
Table height from floor (In.): 39
Dust collection minimum CFM required (CFM): 400
Dust port outside diameter (In.): 4
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,000.00

You've been outbid  to j****y! to YOU!

Placing your bid. please wait...

POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet) Flexible Clear Vue Heavy Duty PVC Hose

Lot # 7B      

Made from high quality PVC for durability, strength and easy installation
Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
Perfect for any clear Vue dust collection system ? allowing you to monitor dust/ debris separation and vapor/ smoke filtration
Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4? PVC dust collection systems for woodworking applications
Includes (one) clear flexible hose - 20 feet long 4" Diameter
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 30.00

You've been outbid  to v****1! to YOU!

Placing your bid. please wait...

Fuji Spray Aicap Set for T-Series Spray Gun 1.0 mm 1.3 mm 1.5 mm 1.8 mm ***$260

Lot # 4B      

#2...1.0mm (.039?) ? Fine output ? Most ?fine finishing? ? water-based lacquers, nitrocellulose lacquers, sealers, cellulose, acrylics, synthetics, polyurethane stains, varnish, glitter paints, primers.

#3...1.3mm (0.51?) ? Medium output ? Similar to #2 but more coverage. Especially suitable for automotive enamels, nitrocellulose lacquer, catalyzed lacquers and latex where finer finish is required such as louver doors, trim, cabinets (see article on latex). Also good for varnishes and oil-based paints.

#4?1.5mm (0.59?) ? Medium output ? Similar to #3 but with more coverage (useful for walls, ceilings, autos) ? Especially suitable for automotive enamels, nitrocellulose lacquer, catalyzed lacquers and latex where finer finish is required such as on louver doors, trim, cabinets. Also good for varnishes, primers, and oil-based paints. (Higher output allows you to spray fast drying finishes to obtain better leveling.)

#5...1.8mm (.070?) ? High output ? for larger surfaces, thick layers, spotted effects ? for sealers, varnish, polyurethane, oil-based paints, enamels, epoxy, plastic, adhesives, floor paving paints, latex (on walls), splatter paints, multi-fleck, etc.
 
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 110.00

You've been outbid  to T****k! to YOU!

Placing your bid. please wait...

DeWalt 13'' 2-Speed Planer w/ BYRD SHELIX CARBIDE CUTTING HEAD UPGRADE ***40 Cutting Teeth***

Lot # 6      

The Dewalt DW735 planer has a huge upgrade in the Byrd Tools SHelix cutter head which turns the original Dewalt 3 knife system into an industrial carbide tipped workhorse. The SHelix completely revolutionizes the way the Dewalt is able to cut, it can take large bites off any hardwood with ease. It is dramatically quieter and draws substantially less amperage. With 40 cutting teeth the SHelix design eliminates tear out and board snipe.
***Like New Condition***
**Includes:**
DeWalt DW735
Byrd Tools SHelix Head w/ 40 Carbide Teeth
Replacement Carbide Teeth #KN400
DeWalt Planer Stand
Indeed/Outfeed Tables
Dust Port
***$1223***


Powerful 15 amp, 20,000 rpm motor handles larger cuts in wider materials with ease.

10,000 rpm cutter-head speed delivers 30% longer knife life and makes knife change faster and easier.

Two-speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI

Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the machine.

19-3/4 in. cast aluminum base is 2X more rigid than a standard 10 in. base.

Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user.

Material removal gauge and extra large, thickness scale delivers accurate cuts with every pass.

Extra large, turret depth stop allows user to return to most frequently used thicknesses with ease.

SPECIFICATIONS
15.0 AMPS
DEPTH CAPACITY 6 IN
MAX DEPTH OF CUT 1/8 IN
NO LOAD SPEED 20,000 (MOTOR)/10,000 (CUTTERHEAD) RPM
PLANER TYPE STATIONARY
POWER TOOL TYPE CORDED
TOOL WEIGHT 92 LBS
WIDTH CAPACITY 13 IN
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,100.00

You've been outbid  to n****t! to YOU!

Placing your bid. please wait...

Ridgid 6 Amp Corded 6-1/8 in. Jointer/Planer JP06101

Lot # 8      

***Like New***
***$599***
6-1/8 in. maximum cutting width
1 HP, 3450 RPM, heavy duty induction motor operates at 120-Volt or 240-Volt
Dimensions: 45.5 in. L x 31.25 in. H x 19 in. D; weighs 208 lbs.
Dual bevel fence with stops at 45..., 90..., and 135...
Belt drive delivers smooth, consistent power
Machine-ground surfaces for precise jointing/planning
Easy-to-assemble with a rugged cast-iron base to minimize vibration
Rabbeting ledge for precise rabbets up to 1/2 in. deep, adjustable front and rear tables
Fan cooled for longer life
Convenient 4 in. dust port quickly slides out of the way when not in use
Includes: (1) JP0610 6-Amp 6-1/8 in. Jointer/Planer with steel cabinet and operator's manual
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 400.00

You've been outbid  to y****3! to YOU!

Placing your bid. please wait...

Miller Millermatic 190 MIG Welder With Auto-Set (907613) 240VAC, Flux Core, MIG ***$1299

Lot # 9      

***Like New***
***$1299***
**Accessories Included - See Photos**

The Miller Millermatic 190 MIG Welding Package is an all-in-one wire welder that welds 24 gauge to 5/16 inch mild steel! Thanks to new inverter technology, the Millermatic 190 weighs a feather-light 35 lbs while still packing the punch you've come to expect from Miller! The MM 190 also features Auto-Set, a breakthrough control that automatically sets your welder to the proper parameters, making this one of the simplest machines to set up and start welding.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 750.00

You've been outbid  to c****y! to YOU!

Placing your bid. please wait...

Fuji Spray HVLP 25ft. Turbine Air Hose with Quick Connect PLUS 6' Whip Hose

Lot # 4C      

The Fuji Hi-Flex?hose is new and improved with a kink free spring to prevent bending and obstructions. This 25 ft hose is standard with all Fuji Spray systems. The solid plastic hoses typical with most HVLP turbine systems are hard and stiff making the spray gun difficult to maneuver. The Hi-Flex? Hose is not only flexible at different temperatures, it will stay flexible over the years (unlike the plastic hoses that become stiffer with age due to the emission of plasticizers). This hose also includes quick-connect and air control valve.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 50.00

You've been outbid  to T****k! to YOU!

Placing your bid. please wait...

Century K2953-1 Linc Screen II Variable Shade 9-13 Welding Helmet **Welding Gloves*Welding Sleeves *

Lot # 9A      

Century Welding Helmet + Gloves + Sleeves
Auto Darkening
Solar cell powered - auto on and off
Continously variable external control for shades 9-13
Two indpendent arc sensors to help avoid blind spots
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 40.00

You've been outbid  to c****y! to YOU!

Placing your bid. please wait...

Extra Large Slab Leveler - Triton TRA001 3-1/4 HP Dual-Mode Plunge Router

Lot # 9D      

This is a custom built manual routing setup that is capable of leveling out slabs up to 63 in. wide and 12-14 ft long with an incredible degree of accuracy. See pictures for samples of the perfect results.

The slider runs along steel rails as shown in the illustrations attached. This allows an infinite number of alterations to fit projects of many different sizes and applications.
Includes: Triton TRA001 3-1/4 HP Dual-Mode Plunge Router
Mounted Guide Sled
2 pcs 12 ft - 1/4 in. Rectangle Steel Tube (Rails)
3 pcs 80 in. -1/4 in. Rectangle Steel Tube (Cross members)
2 pcs 8 ft. -1/4 in. Rectangle Steel Tube (Cross members)
1 pc 10 ft -1/4 in. Rectangle Steel Tube (Cross member)
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 350.00

You've been outbid  to M****s! to YOU!

Placing your bid. please wait...

CENTRAL MACHINERY 30 In. Pedestal High Velocity Shop Fan

Lot # 9C      

This high velocity shop fan provides massive air flow for ventilating large areas, drying carpets or removing paint fumes quickly. This commercial grade unit includes a grounded power cord, thermal overload protection for added safety and two carry handles for easy portability to any job. With three speed options and adjustable tilt, this powder coated pedestal fan is a great unit for any shop or garage.

High velocity air flow
Commercial grade with grounded power cord
Thermal overload protection
Tilts to a 70 deg. angle
Adjustable height from 56 in. to 6 ft.
Formed aluminum blade enclosed in a durable all-steel protective grill
Three speed air flow - high, medium, low
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 70.00

You've been outbid  to c****e! to YOU!

Placing your bid. please wait...

POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet) Flexible Clear Vue Heavy Duty PVC Hose

Lot # 7A      

Made from high quality PVC for durability, strength and easy installation
Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
Perfect for any clear Vue dust collection system ? allowing you to monitor dust/ debris separation and vapor/ smoke filtration
Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4? PVC dust collection systems for woodworking applications
Includes (one) clear flexible hose - 20 feet long 4" Diameter
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 30.00

You've been outbid  to T****k! to YOU!

Placing your bid. please wait...

FESTOOL Plunge Cut Track Saw TS 75 EQ-F-Plus No. 575389 ***$675

Lot # 9F      

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

Weight
13.67 lbs
Saw blade diameter
8.27 in
Saw blade diameter
8-1/4? (210 mm)
Cutting depth at 45...
2-1/8? (55 mm)
Cutting depth
0" - 3? (0 - 75 mm)
Power consumption
1?600 watt
Dust extraction connection dia.
1-1/16"/1-7/16" (27/36 mm)
Angular range
0 - 47 ...
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 500.00

You've been outbid  to b****e! to YOU!

Placing your bid. please wait...

LITTLE GIANT Steel Workbench WX-4284-34 ** 42" D X 34" H X 84" W ***$1299 ***15,000 lb Load Capacity

Lot # 9E      

Extra heavy duty welded steel workbench with an incredible 15,000 lbs. capacity!!
Table has a removable top made from 2 sheets of MDF which give you a replaceable table top after long term use without damaging the steel table top.
The MDF table top also serves to expand the work surface to 48" X 96".

These all-welded, extra heavy duty workbenches are designed for heavy-duty uses. The workbench top is 7 gauge steel and is supported by a frame of heavy duty 3" x 1-1/2" C channel. The legs are constructed from the 3" C channel and are welded to the top with 7 gauge gussets. Foot pads with 5/8" diameter pre-punched anchor holes. Top height is 34". Gray powder coat finish.
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 550.00

You've been outbid  to a****1! to YOU!

Placing your bid. please wait...

Lot of (2) FESTOOL 491594 Quick Ratcheting Clamp, 6-5/8" PLUS Festool 482107 Guide Rail Connector

Lot # 9G      

Clamping capacity 6-5/8 inches (168mm). Secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

PLUS 2X RAIL CONNECTORS
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 55.00

You've been outbid  to b****e! to YOU!

Placing your bid. please wait...

FESTOOL Guide Rail FS 800/2 No. 491499 ***31.5 inch Rail***$92

Lot # 9J      

Use the FS 1900 Guide Rail (31.5 inches) with the Festool TS Plunge cut saw to make precision cuts.

Integrated splinterguard serves as cut line and prevents tear-out and splintering

A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability

Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 60.00

You've been outbid  to F****e! to YOU!

Placing your bid. please wait...

HUSKY 52in 9-Drawer, Deep Tool Cabinet Workbench in Gloss Black with Hardwood Top*WITH KEYS*

Lot # 10A      

***Like New***
***Keys Included***
Mobility and functionality are combined in this Deep Tool Chest Mobile Workbench. This bench has more capacity to store items with its 15-in. deep units and its nine drawers. All nine lockable 15-in. deep drawers that glide easily on the 100 lb.-rated, ball-bearing drawer slides.
52 W X 18 D X 37 H
9 Drawer, including 1x wide, 6x standard, 2x extra deep
***$499
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 425.00

You've been outbid  to M****6! to YOU!

Placing your bid. please wait...

CRAFTSMAN 27in 5-Drawer Rolling Tool Cabinet***WITH KEYS***

Lot # 10C      

***Like New***
***Keys Included***
Craftsman rolling push tool chest. Liners included. ***$299
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 200.00

You've been outbid  to c****4! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 13

1.178.0.771.56c32e2.13.117