Serial # JJ00038348 3535 hours with 1999 CIH 1063 6 row cornhead Serial # 335416 CIH 810 grain platform with Renn Pickup 16 1/2' Serial #370098 One owner, always shedded Location: Gilcrest, CO Inspection: Contact Terry Wiedeman (970) 396-9464...more

Purchased near new, 2nd owner; twin cylinder hoist; 5 spd 2 spd w/ 17' Jacobs box with fold up stock rack. Drivers seat needs reupholstered. The bumper & body is in good condition, with minor dents. 450 engine, Red Diamond, 6 cylinder Location: Berthoud, CO Inspection: Jack Sullivan (970) 532-3460...more

Complete Model# 610-020 Serial# 1287-144 Location: Wellington, CO Inspection: Contact Everrett Schneider (970) 215-3440...more

DT466 twin screw engine rebuilt by Int. Ellis & Capp several years ago. 20' extension steel box, rear hoist, silage gate, steering a little loose when loaded. 5-37 rear ends, 10.00x20 tires, Hendrickson RT 340, 12,000 lb. front axle, 14,000 lb. rear axle GBRW, 2-50 gallon fuel tanks, RG613 Fuller transmission Location: Wellington, CO Inspection: Contact Everrett Schneider (970) 215-3440...more

Serial #W00265x0006156 Self leveling, joystick, loader was on JD 4430. The top of the bucket has been sprung and welded. With that exception, it is a solid loader. Location: Wellington, CO Inspection: Contact Everrett Schneider (970) 215-3440...more

Serial #U20338 6240 hours 3 pt. 3 hydraulics 15.5x38 rubber & axle mount duals Location: Gilcrest, CO Inspection: Contact Terry Wiedeman (970) 396-9464...more

9' Owned 10 years A-1 shape 540 PTO Location: Laporte, CO Inspection: Brad Cole (970) 420-8435...more

Variable floor speed 1000 PTO originally but converted to 540 Not used in 4 years. There is some rust on the spreader, but owner represents it as a solid machine. The gear box was cracked and repaired by previous owner, and has not caused problems. Location: Ft. Collins, CO Inspection: Brad Cole (970) 420-8435...more

3 pt. has been welded by previous owner AWVDITCH-953113VH4 Location: Laporte, CO Inspection: Brad Cole (970) 420-8435...more

Serial #2510192422010 16.9x38 & axle duals, rubber 15% 12 front weights Owned since 2006 4416 hours on tack AC good, radio good Clutch & TA replaced Sept 09 Front tires 1 year old Location: Berthoud, CO Inspection: Bruce Fishburn (970) 217-1926...more

Serial #8851854 Owner's manual available 18.4x38 and axle duals, new radials Estimated less than 6000 hours Near new duals 20% Location: Berthoud, CO Inspection: Bruce Fishburn (970) 217-1926...more

350 engine, 4S2S, Harsh 12' rear drive, feed box, digital scale - load cells were replaced. All new scale in 2005. Engine is strong, transmission good. Bottom augers are thin but usable. Discharge auger is in good condition. Side and bottoms were relined in 2000 - good shape. Model # 0Ms504 Location: Johnstown, CO Inspection: Kent (970) 381-5096...more

4" electric auger Bazooka electric motor Location: Johnstown, CO Inspection: Kent (970) 381-5096...more

3 row head; good usable cutter; SN #523841 Location: Johnstown, CO Inspection: Kent (970) 381-5096...more

FH 236 loader/grapple Tractor purchased in 1972 with 1200 hours. It has 3500 hours on OH engine. Original tach shows 4316 hours (14,316). 16.9x34 70% & JD axle duals 20% 1 front tire new and 1 20%. New batteries and starter 1 year ago. Loader runs off tractor hydraulics, but is plumbed into hydraulics so remotes are not tied up. Hydraulic spool has 3 to service grapple. Loader is quick tach loader Location: Johnstown, CO Inspection: Kent (970) 381-5096...more

Koyker 510 loader, like new Serial #035939R 8 speed transmission Tack shows 788 hours Dual hydraulics 20.8x38 tires 7.50x18 front Rubber 75% Location: Greeley, CO Inspection: Mike (970) 381-0325...more

Riley chute (www.rileybuilt.com) Riley fabricated & installed all tilt table equip, storage boxes, & protection rail/guards. Riley hoof trimming chutes are the best available. They are the most functional & last for years. Operates on 12 V marine batteries in a series to operated at 36V. Is charged by a 36V dc charger. A new tilt table set up like this is over $20,000 today (not incl truck). Riley chutes are the top choice by hoof trimmers. You won't find any better. This chute has lifted 3000 lb. bulls. Height & angle is adjustable. Chute can be removed from truck & installed stationary. Great opportunity to start up your own hoof trimming business. Chute will pay for itself within the first few months. This setup was used on our family dairy for the first 1/2 of it's life, & on the road for about 4 to 5 years. Low mileage engine & transmission, it will last another 10 years or more with regular maintenance. 45,000 miles on new engine, & 11,000 miles on rebuilt transmission. Tires weak, pickup bought with 91,000 miles; chute can operate independent from truck if user wishes to separate truck & chute. Location: Severance, CO Inspection: Scott (970) 214-6758 delivery available for additional fee - contact seller. ...more

Mfg by Kelly Ryan Equip of Blair, NE; has been fully reconditioned & shedded; weight 1800 lbs. 182" long by 80" wide; 115 bushel capacity; extra parts to go with it & additional parts available from company if needed; has not been used recently. Location: Eaton, CO Contact: Jim @ (970) 454-3836 or (970) 590-0500...more

Good 21" blades; Serial # 1341 Location: Lucerne, CO Contact: Perry (970) 356-0116 or (970) 371-0365...more

Serial #290538; 5671 hours; front weights; dual hydraulics; rear duals 20.8x38 - 60%; front 11.00x16 - 80% Location: G&M Implement, Greeley, CO Contact Rich Carlson @ (970) 381-3838...more

Kois 12' box; Harsh hoist; pintle hitch; 5 spd V-8 gas engine; VIN 1GDC6D1B7LV502767...more

by Crown Construction Equip; GX31 Honda 4 stroke engine; purchase new for $1900 and has been used only 5 times Location: Greeley, CO Contact Wayn at (970) 356-3945...more

Serial #CCC0001904; Model 721 1330123 draper windrower; 540 PTO; left side of draper canvas might be original, some wood slats are missing and canvas is there but weathered; the right canvas is newer and in good condition Location: Berthoud, CO Contact: Brad 970-988-3777...more

Serial #160H42529; Tongue # T16003129; has owner's manual and parts manual; 14' machine has good appearance, good sickle, the reel slats are slightly bent in spots, left wheel arm has been repaired, belts and chains are in good condition; left tire and wheel are not iriginal with the tire some wear and checked overall appearance is good Location: Berthoud, CO Contact: Brad 970-988-3777...more

2002 model with galvanized tower and pipe; Grow smart controls; panel #P45886 dated 2-20-02; Cutler-Hammer electrical panel, Great Plains flow meter model #MD308-1300OVRP, Serial #04-8-4178 with the meter reading 360126; tires are 11R24.5 and appear to be in good condition; it has 1116.75' of sprinkler pipe and a 92.45 GPM end gun with a 2 HP electric motor with a range of 95.42'; spray nozzles are Senninger with outlet of 10, PSI at 1/2 - 5 GPM; there is an older booster pump (unable to read motor ID) Location: Wiggins, CO Contact Terry (970) 222-7313 or Audrey (970) 222-7314 or Ed (970) 290-1672...more