{"message":"In _app.tsx at root","renderCount":1}
{"message":"In _app.tsx child child of NextIntlProvider","renderCount":1}
{"message":"In _app.tsx child of hammerui provider","renderCount":1}
{"message":"In layout.tsx top level","renderCount":1}
Browse By
Today's EventsLive AuctionsTimed AuctionsAll EventsAuction HousesAuctions Near MeFeatured Items
About Auctions
BuyingSellingHelp
{"message":"In layout.tsx sibling to main","renderCount":1}
{"message":"In _app.tsx child of Layout","renderCount":1}
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A9 Photos
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A
Harris Guillotine Shear BSH-26-1113A

Harris Guillotine Shear BSH-26-1113A

Lot Closed

Auction by Salvex(24)
This item is in Pittsburgh, PA

Similar Items

Overview of Harris Guillotine Shear BSH-26-1113A

Item Details

This shear is no longer needed for the company's operation and is being sold in an asset liquidation sale for the owner.
    Details are listed below :
  • Qty: 1 Shear
  • Make: Harris
  • Year: 1997
  • Weight: 214 tons
  • $80,000 worth of new spare parts included.
    • SPECIFICATION----
    Application:
  • Steel mill scrap, shapes, pipe and plate -- No. 2 heavy melting scrap -- No. 1 heavy melting scrap -- selected sections of freight car and ship scrap
    • 1. Capacity and Rating:
  • Hopper Loading Area: 104'' wide x 310" long
    • Shear Box Dimensions:
  • Open For Charging: 115-1/2" wide x 52" deep x 312" long
  • Closed For Shearing: 34" wide x 38" deep x 312" long
  • Compressing Capacity: 1/2" x 106" x 300" mild steel plate or equivalent
  • Sheer Throat: 37" wide x 30" high
  • Shearing Force: 1100 tons
  • Clamp Force: 275 tons
    • Shearing Capacity (Mild Steel Material):
  • Round - 7-1/2"
  • Square - 6-5/8"
  • Plate - 4" to 4-1/4" x 34"
  • Clamp Force: 275 tons
  • Production Rate: 24-30 tons/hr.
    • Cuts Per Minute:
  • 3-1/2 - 4-1/4 - rated plate
  • 5-1/2 - average cut, 2" plate or equivalent
  • 7 - crosshead only, full stroke
    • 2. Components: Electric Motors:
  • Main System: Three (3) 100 HP. 1750 RPM, 230/460 volt, 3Ø, 60 Hz, protected enclosure
  • Pilot System: One (1) 10 HP, 1750 RPM, 230/460 volt, 3Ø, 60 Hz, protected enclosure
  • Filter System: One (1) 3 HP, 3500 RPM, 230/460 volt, 3Ø, 60 Hz, protected enclosure
  • Cooling System : One (1) 7-1/2 HP, 3500 RPM, 230/460 volt, 3Ø, 60 Hz, protected enclosure
    • Electrical Control System:
  • One (1) NEMA XII control panel to include across-the-lne motor starters for 440 to 600 volt power with overload protection, circuit breaker, control circuit transformer and cycle control system wired to terminal srips.
  • One (1) operator's station enclosure to include oil tight control switches and signal, wired to terminal strips.
    • Hydraulic System: Main Pumps:
  • Six (6) 52 GPM @ 3575 p.s.i
  • Three (3) 108 GPM @ 1700 p.s.i
  • Three (3) 108 GPM @ 1100 p.s.i
    • Pilot System:
  • One (1) 12 GPM @ 900 p.s.i
  • Filter Pump: One (1) 60 GPM @ 20 p.s.i
    • Cooling Pump:
  • One (1) 120 GPM @ 50 p.s.i
  • Valves: Harris or equal
  • Invidual relief valves protech each pump from overload pressure
  • Directional valves ae electrically controlled and hydraulically operated
  • Cylinders: Harris double acting all places: teflon protected in honed boros; rods flame hardened, ground and polished; standardized rod wipers, packng and "O" ring gaskets.
  • Shear Cylinder: One (1) 28" bore, 1100 tons
  • Clamp Cylinder: One (1) 14" bore, 275 tons
  • Feed Cylinder: One (1) 12" bore, 187 tons
  • Box Cylinders: One (1) 12" bore, 187 tons, each side
  • Arm Cylinder: One (1) 9" bore, 105 tons, each side
  • Hopper Cylinder: One (1) 6" bore, 47 tons
    • Filtering And Cooling System:
  • Filtering is by combination of screens, tank magnets, and replaceable type micronic filters
  • Circulation through filter and heat exchanger provides maximum effeciency
  • Oil to air heat exchangers are standard.
    • Lubricating System:
  • Automatic force feed lubricant to crosshead and clamp ways.
    • 3. Operation:
  • Scrap for each charge is normally loaded on the hopper during the shearing phase
  • Scrap is charged into the open compression box. The box is manually operated to compress and CO confine the scrap. The feed ram positions the charge for the first cut and the shear is put in the automatic mode
  • The clamp engages the scrap, the crosshead makes the shearing stroke and both retract. The feed ram moves the scrap forward to a preadjusted length beyond the knives for the next cut. This automatic cycle repeats until the box is empty, then the crosshead. clamp and feed ram retract, and the box is opened automatically to receive the next charge of scrap.
    • 4. Contruction:
  • The Model BSH-26-113A design follows established Harris standards and incorporates all current improvements.
  • Major sub-assemblies are heavy plate and structural weildments, stress relieved before machining to design dimensions.
  • Final assembly is bolted and keyed.
    • Knives:
  • One set of knives is shipped with the machine and these knives are keyed in hardened knife seats.
  • Hardened knife seats are provided for new knives
  • All four (4) edges are usable
  • Bed knife; Horizontal
    • Note: Bid acceptance is pending seller's review. Seller has the right to reject all bids.

Payment

Please contact the auction company for payment instructions. Payment of an invoice is due within 48 hours via electronic wire transfer. Seller has the right to reject all bids.
Wire TransferCash

Auction Details

Harris Guillotine Shear BSH-26-1113APittsburgh, PA, 15239Wednesday, Jan 18, 2017 | 8:00 AM CST
At the request of the auction company, this auction permits bids to be placed by the auctioneer, and employee of the auctioneer, or the seller or an agent on the seller’s behalf. While Proxibid’s Unified User Agreement prohibits this behavior, in accordance with UCC 2-328, this auction is permitted to engage in this activity by providing this clear disclosure to you, the bidder.
This auction company has requested and been granted access to see all bids placed including any maximum pre-bids. This auction is permitted to engage in this activity by providing this clear disclosure to you, the bidder.

Auction House

Salvex
SalvexHouston, TX(24)
Contact Auction House

Terms Of Sale

Bid acceptance is pending seller's review. Seller has the right to reject all bids.
1.3.205.37cb7cf