17d 8h Left
Jet JRD-750 Radial Arm Drill, 3PH, 220/440 V, S/N 881171, 30" x 20" Table{"message":"In _app.tsx child of Layout","renderCount":1}
Jet 14MF Drill Press
Lot Closed
Auction by USAuctions (389)
This item is in San Lorenzo, CA
Similar Items
3d 9h Left
Milwaukee 873662 Magnetic Base Drill Press$25.003d 9h Left
Milwaukee 42920-1 Magnetic Base Drill Press$10.0019d 13h Left
ASHINA DRILL PRESS19d 8h Left
GUARDIAN DRILL PRESS 3/4 HP5d 13h Left
Bench top 5 speed, 13mm drill press$2.005d 11h Left
AMT 5175 radial drill press with 12" drilling table$1.005d 13h Left
Craftsman 1HP floor mount drill press with 12" drilling table$3.005d 11h Left
Enco 126-2170 drill press with 12" x 12" drilling table$1.003d 9h Left
Ryobi DP102L 10" Benchtop Drill Press3d 9h Left
Wilton Strands 24549 20" Drill Press6d 8h Left
Cincinnati Bickford Drill Press15d 15h Left
Delta Industrial Drill Press$12.0015d 15h Left
Craftsman Industrial Drill Press$2.0010d 10h Left
CHALLENGE PAPER, DRILL MODEL# EH3A$1.0017d 10h Left
Craftsman 1hp Drill Press Floor Model3d 18h Left
New Unused General Model: 75-165 M1 17" Drill Press$55.003d 9h Left
Drill Doctor 750X Drill Sharpener$20.003d 9h Left
(3) Electric Drills9d 9h Left
PRO MASTER FLOOR TYPE DRILL PRESS, 5/8",$11.003d 10h Left
JET Mini-Mite Chain Puller - 353529$5.003d 10h Left
JET Mini-Mite Chain Puller - 353552$5.003d 10h Left
JET Mini-Mite Chain Puller - 353475$5.003d 10h Left
JET Mini-Mite Chain Puller - 353546$5.0017d 8h Left
Nash Kinema Steam Jet Air Ejector, Type Steam Jet, 2-Stage, Flow Rate/ 10 SCFM, Air 45 LB./Hr.,17d 8h Left
Jet Double End 8" Bench Grinder, 120V$5.005d 13h Left
Wayne new 1 hp Shallow well jet pump$1.003d 9h Left
Carlton 5' x 15" Radial Arm Drill9h 37m Left
Jet 15'' Planer, 3 HP, Single Phase, 230V, Model JWP-15HO$250.0017d 8h Left
Assorted Drill Bits19d 14h Left
HOUGEN MAGNETIC DRILL17d 8h Left
Assorted Hammer Drill Bits17d 8h Left
Hilti TE5G Hammer DrillOverview of Jet 14MF Drill Press
Item Details
Dayton Motor Small Drill bit assortment
(Springs not included).
(Springs not included).
Payment
Once you are sent an invoice we will automatically charge your card on file. Please make sure you are current with Proxibid as far as expiration dates, and balance available as we have a short window for pick-up. If you have a re-seller certificate, E-mail me the number so I can verify it prior to sending out invoices or you will end up being charged.
Wire TransferCash
Auction Details
Auction House
Terms Of Sale
This is considered an Abandoned Property auction and is being held to satisfy a Lien. It does have the potential to disappear if the tenant pays the required fees. It is being held with section 2328 of the commercial codes, section 535 of the penal codes and various provisions of the CA Civil Codes. Your buying the items as is, where is, there is nothing expressed or implied.
Property is open to thorough public inspection. It is the Bidder's responsibility to determine condition, age, genuineness, value or any other determining factor. USAuctions may attempt to describe the merchandise in advertising, or on the Internet but makes no representations. In no event shall USAuctions be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value. Bidders who bid from off site and are not present at the preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person.
You are also agreeing on a no charge back policy. Bidder agrees that everything is sold as is where is and that they may not return any item they purchase. USAuctions is providing Internet bidding as a service. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction and USAuctions reserves the right to withdraw or re-catalog items in this auction.
All electrical items will be uncapped by the owner of the building. It is your responsibility to schedule riggers for removal. We will have a forklift on board for 2 days to assist in the removal process and will be scheduled for May 27th and 28th. All small items will need to be removed from May 24th thru May 26th 2021. We loose the building on May 30th, so if you items are not out in time, it's gone!
2 shippers for 40 lbs and under are: CVinisko@gmail.com and milosancho@gmail.com (you must email them for pick up and pay direct to them). Remember shipping can be expensive.
For items that may need pallets. We can pick up some pallets and palletize for shipping. Fees are 90.00 per pallet request. Please contact me prior so I can make the arrangements to pack.
All Machine Movers and Rigging John at 408-972-9395
Auction begins ending 22 May 2021, at 4pm. Pick up/Removal will be Monday 24 - 26 May 2021 and 27-29 for large equipment such as Mill and Lathes.
Auction Location: 610 E. Lewelling Blvd, San Lorenzo, CA 94580