Gold Jewelry Auction
Saturday, October 15, 2011 | 9:00 PM Central
Auction closed.
Gold Jewelry Auction
Saturday, October 15, 2011 | 9:00 PM Central
Auction closed.
Internet Premium: 18%
See Special Terms for additional fees
See Special Terms for additional fees
Description
Auction of Appraised gold jewelry.
x Cancel
All values are replacement value
According to the appraisals "This report was requested by the seller to provide an authoritative description of the subject item for a prospective purchaser. The estimate of replacement value (cost new) is appropriate for the function of obtaining insurance coverage and is researched in accordance with standard insurance contracts. The item of jewelry described in the report is not in new and unused condition at the time of inspection."
Lady’s White gold and Diamond Ring and Necklace Set
Ring Metal: 10K white gold Markings: 10K (unrecognized trademark) Size: 7 Necklace Metal: 14K white gold Markings: 14K D JB [in a diamond-shaped frame] M Length: 18 inches The estimated total weight of all diamonds in the necklace is 1.75 ct. Thirty-seven Baguette Cut Natural Diamonds - Mounted Dimensions: range in size from approximately 1.7 x 0.9 mm to 2.3 x 1.2 mm straight and tapered Estimated total weight by formula: 0.75 ct Clarity: I-1 Color: G-I Exhibit fair cuts Sixty-seven Full Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) sixty 1.4 – 1.5 mm seven 2.0 – 2.1 mm Estimated total weight by formula: 1.0 ct Clarity: I-1 to I-2 Color: G-I Exhibit fair cuts Replacement value of set (cost new): $ 3200.00. For more description see our listing at http://www.auctionzip.com/Listings/1215124.html
Lady’s Yellow Gold and Diamond Cuff Bracelet
Metal: 14K yellow gold Markings: 14K Method of Manufacture: cast and assembled Dimensions: bracelet bar measures approximately 3.3 to 3.8 mm wide and 1.4 to 1.6 mm thick Weight: 8.545 grams Settings: six prong tall round open back setting Construction: good Condition: good Finish: polished The bracelet is a narrow wavy solid cuff style with a prong setting soldered at the center top. One round brilliant cut diamond is featured in the prong setting. One Round Brilliant Cut Natural Diamonds - Mounted Dimensions: approximately 4.21 – 4.24 x 2.6 mm Estimated weight: 0.28 ct Clarity: I-2 Color: I Fluorescence: strong blue Exhibits a fair cut Replacement value (cost new): $ 1700.00
Gent’s Yellow Gold and Diamond Ring
Metal: 14K yellow gold Markings: H.S.J. 14K .56c [trademark for Henry Silverman Jewelers] Size: 11 ¾ Method of Manufacture: cast Dimensions: ring tapers from approximately 9.4 to 5.8 mm wide and 5.3 to 1.15 mm thick Weight: 12.935 grams Settings: four heavy integrally cast prongs Construction: fair to good Condition: good Finish: polished The ring is a gent’s tapered Belcher style consisting of four heavy integral prongs centered at the top of a tapered flat shank. One round brilliant cut diamond is featured in the prong setting. One Round Brilliant Cut Natural Diamond - Mounted Dimensions: approximately 5.73 – 5.89 x 3.58 mm Estimated weight: 0.73 ct Clarity: VS-1 Color: F Fluorescence: medium blue Table: 65% (3.8 mm) Crown angle: visually estimated at 32° Total depth: 61.6% Pavilion depth: visually estimated at 46% Girdle: extremely thin to thick – faceted and irregular Culet: small Symmetry: fair Polish: good Replacement value (cost new): $ 8100.00
Marquise Diamond Stud Earrings
Metal: 14K yellow gold Markings: 14K Method of Manufacture: assembled from cast and manufactured components Dimensions: each earring measures approximately 8.4 mm long and 3.8 to 4.0 mm thick Total Weight of Pair: 1.420 grams Settings: cast two prong V-shaped custom setting with solid back Construction: fair to good Condition: good Finish: polished Each earring consists of a custom marquise-shaped setting soldered to a threaded post and fastened with a 5.65 mm round screw-type back. One marquise-shaped diamond is featured in each. One Marquise-shaped Brilliant Cut Natural Diamond - Mounted Dimensions: approximately 7.2 x 4.31 x 2.9 mm Estimated weight: 0.51 ct Clarity: VS-1 Color: F Fluorescence: faint blue Table: 63% (2.7 mm) Total depth: 67.3% Girdle: medium to slightly thick – faceted Keel line: straight Symmetry: good Polish: good One Marquise-shaped Brilliant Cut Natural Diamond - Mounted Dimensions: approximately 7.4 x 4.42 x 2.9 mm Estimated weight: 0.54 ct Clarity: I-1 Color: G Fluorescence: inert Table: 59% (2.6 mm) Total depth: 65.6% Girdle: medium to slightly thick – faceted Culet: small Symmetry: good Polish: good Replacement value (cost new): $ 3650.00
Pair of Yellow Gold and Round Diamond Stud Earrings
Metal: 14K yellow gold Markings: 14K (unrecognized trademark) Method of Manufacture: cast Dimensions: each setting measures approximately 4.1 mm at the base and stands 4.6 mm tall Total Weight of Pair: 0.846 grams (exclusive of findings) Settings: four prong round closed back setting Construction: good Condition: good (one post is bent) Finish: polished Each earring consists of a round prong setting centered on a standard post and fastened with a plastic earring back. One round brilliant cut diamond is featured in each. One Round Brilliant Cut Natural Diamond - Mounted Dimensions: approximately 4.99 – 5.00 x 3.0 mm Estimated weight: 0.46 ct Clarity: SI-2 Color: H Fluorescence: inert Table: 55% (2.75 mm) Total depth: 60% Girdle: slightly thick to thick – faceted Culet: chipped Symmetry: good Polish: good One Round Brilliant Cut Natural Diamonds - Mounted Dimensions: approximately 4.9 - 4.95 x 3.15 mm Estimated weight: 0.47 ct Clarity: SI-2 Color: J Fluorescence: medium blue Table: 63% (2.6 mm) Total depth: 63.9% Girdle: thin to slightly thick – faceted Culet: small Symmetry: good Polish: good Replacement value (cost new): $ 2900.00
Lady’s Yellow Gold and Diamond Ring
Metal: 14K yellow gold Markings: 14K © LGL Size: 7 ¼ Method of Manufacture: cast and assembled Dimensions: ring tapers from approx. 10.5 to 2.5 mm wide 6.55 to 0.85 mm thick and 10.5 mm tall off the finger Weight: 10.272 grams Settings: tall white gold rectangular setting for invisibly set square stones with curved filigree base Construction: fair Condition: fair Finish: polished The ring is an engagement style consisting of a tall white gold prong setting centered on a tall tapered dome style yellow gold ring with raised vertically channel set shoulders and recessed channel set ends. Six princess cut diamonds are invisibly set in the prong setting giving the appearance of a large rectangular stone. Sixteen baguette cut diamonds are channel set in a total of six rows down the shoulders and twelve full cut diamonds are channel set on each end. The estimated total weight of all diamonds in the ring is 2.04 ct. Six Princess Cut Natural Diamonds - Mounted Dimensions: range in size from 2.9 – 3.2 mm square and rectangular Estimated total weight: 0.96 ct Sixteen Baguette Cut Natural Diamonds – Mounted four 2.7-2.8 x 1.6-1.7 mm straight two 2.7-2.8 x 1.5-1.6 mm tapered ten 2.3-2.6 x 1.3-1.7 mm straight and slightly tapered Estimated total weight: 0.70 ct Clarity: SI Color: G-I Exhibit fair cuts Twenty-four Full Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) twenty 1.5 – 1.6 mm (0.015 ct each) four 1.7 mm (0.02 ct each) Estimated total weight: 0.38 ct Clarity: I-2 Color: I-K Exhibit fair to poor cuts Replacement value (cost new): $ 2300.00
All values are replacement value
According to the appraisals "This report was requested by the seller to provide an authoritative description of the subject item for a prospective purchaser. The estimate of replacement value (cost new) is appropriate for the function of obtaining insurance coverage and is researched in accordance with standard insurance contracts. The item of jewelry described in the report is not in new and unused condition at the time of inspection."
Gent’s Yellow Gold and Diamond Nugget Band
Metal: 14K yellow gold Markings: 14K TI Size: 11 Method of Manufacture: cast and assembled Dimensions: ring tapers from approximately 12.0 to 5.1 mm wide 4.0 to 1.25 mm thick and stands 5.2 mm tall off the finger Weight: 10.299 grams Settings: seven white gold four prong round open back settings Construction: fair Condition: fair Finish: polished The ring is a yellow gold carved and cast nugget style tapered band with seven white gold prong settings drilled and soldered around the top. Seven round diamonds are featured in the prong settings. Seven Round Brilliant Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) one 4.19 – 4.21 x 2.49 mm (0.27 ct) one 2.6 mm (0.06 ct) two 2.2 – 2.3 mm (0.04 ct each) one 2.0 mm (0.03 ct) two 1.8 mm (0.025 ct each) Estimated total weight: 0.49 ct Clarity: SI (one chipped) Color: H-I Exhibit fair cuts Replacement value (cost new): $ 3950.00
Lady’s White Gold and Diamond Cluster Ring
Metal: 18K white gold (tested) Markings: markings are worn and illegible Size: 6 Method of Manufacture: cast and assembled Dimensions: ring shank tapers from approximately1.2 to 1.8 mm wide and 5.2 to 1.2 mm thick ring top measures 11.6 mm in diameter and stands 7.0 mm tall off the finger Weight: 3.028 grams Settings: six prong white gold open back setting with fancy gallery integrally cast with round three prong cluster frame Construction: good Condition: good Finish: polished The ring consists of a round cluster top raised on a soldered wire gallery and centered on a tapering cathedral style shank. One round brilliant cut diamond is featured in the center prong setting and fourteen single cut diamonds are prong set into the surrounding frame. One Round Brilliant Cut Natural Diamond - Mounted Dimensions: approximately 4.89 – 4.95 x 2.76 mm Estimated weight: 0.40 ct Clarity: I-1 (good) Color: F Fluorescence: inert Table: 66% (3.25 mm) Total depth: 56.1% Pavilion depth: visually estimated at 39% Girdle: thin to medium Culet: abraded Symmetry: good Polish: good Fourteen Single Cut Natural Diamonds - Mounted Dimensions: approximately 1.7 – 2.0 mm Estimated total weight: 0.35 ct Clarity: VS to SI (two chipped from normal wear) Color: G-H Exhibit good cuts for type Replacement value (cost new): $ 2650.00
Gent’s Yellow Gold and Diamond Band
Metal: 10K yellow gold Markings: 10K SHR [in a diamond-shaped frame] Size: 10 ¾ Method of Manufacture: cast Dimensions: ring tapers from approximately 7.3 to 3.4 mm wide and 3.8 to 1.2 mm thick Weight: 4.357 grams Construction: good Condition: good Finish: polished with satin finish along channel bars and rhodium plated white in color inside channel The band is a tapered style with diagonally oriented raised channel bars across the top and down the shoulders. Three full cut diamonds are prick punch set into the channel. Three Full Cut Natural Diamonds - Mounted Dimensions: approximately 2.3 – 2.4 mm Estimated weight: 0.15 ct Clarity: I-1 Color: G-I Exhibit fair to good cuts Replacement value (cost new): $ 925.00
Gent’s Yellow Gold and Cubic Zirconia Ring
Metal: 14K yellow gold Markings: 14K (unrecognized trademark) Size: 8 ½ Method of Manufacture: cast Dimensions: ring tapers from approximately 11.6 to 5.15 mm wide and 4.25 to 1.1 mm thick Weight: 10.328 grams Construction: fair Condition: good Finish: polished with textured recesses The ring is a cast nugget signet style with a rectangular top and tapered shank. Five 2.5 mm round synthetic cubic zirconias are set into a diagonal channel across the top of the ring. Replacement value (cost new): $ 1625.00
Gent’s White Gold and Diamond Signet Ring
Metal: 10K white gold Markings: 10K IBG [I.B. Goodman trademark] PAT. © Size: 11 ¾ Method of Manufacture: Dimensions: ring tapers from approximately 15.3 to 3.6 mm wide and 6.3 to 1.05 mm thick Weight: 10.375 grams Construction: good Condition: good Finish: polished with satin-finish on raised surfaces of shoulders The ring is a tapered signet style with a square cushion-shaped top and tapered shank. Three flared channels are oriented horizontally across the ring top and extend visually into three polished grooves down the shoulders. Fifteen full cut diamonds are prick punch set into the channels. Fifteen Full Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) one 3.3 mm (0.14 ct) four 2.7 - 2.8 mm (0.08 ct each) four 2.4 mm (0.05 ct each) six 2.1 – 2.2 mm (0.04 ct each) Estimated total weight: 0.90 ct Clarity: SI-2 to good I-1 Color: J – L (faint brown) Exhibit good cuts for type Replacement value (cost new): $ 3550.00
Gent’s Yellow/White Gold and Diamond Ring
Metal: 14K yellow and white gold Markings: 14K C Size: 9 ¾ Method of Manufacture: cast and assembled Dimensions: ring tapers from approximately 11.45 to 2.8 mm wide and 6.0 to 1.1 mm thick Weight: 6.176 grams Settings: round white gold shared prong cluster plate Construction: fair Condition: fair Finish: polished with textured recesses The ring is a tapered dome nugget style in yellow gold with a white gold cluster plate centered at the top. Seven full cut diamonds are set into the white gold plate. Natural Diamonds - Mounted Dimensions: (all measurements are approximate) one 2.7 mm (0.07 ct) six 2.3 – 2.6 mm (average 0.05 ct each) Estimated total weight: 0.37 ct Clarity: I-1 to I-2 Color: H-J Exhibit fair to poor cuts Replacement value (cost new): $ 1180.00
Gent’s Yellow Gold Diamond and Black Onyx Ring
Metal: 14K yellow gold Markings: 14K IBG [I.B. Goodman trademark] Size: 11 ¼ Method of Manufacture: cast Dimensions: ring tapers from approximately 9.37 to 3.0 mm wide and 3.0 to 0.95 mm thick Weight: 5.909 grams Construction: good Condition: good Finish: polished The ring is a signet style with a rectangular top flat ends and a tapered shank. One 2.8 mm wide bar of black onyx is inlaid across the center of the ring top and a total of sixteen full cut diamonds are channel set in two rows one on either side of the onyx inlay. Sixteen Full Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) four 2.2 mm (0.04 ct each) twelve 2.3 – 2.4 mm (0.05 ct each) Estimated total weight: 0.76 ct Clarity: SI-2 to good I-1 Color: H-J Exhibit good cuts Replacement value (cost new): $ 3350.00
Gent’s Yellow/White Gold and Diamond “Rolex Style” Ring
Metal: 14K yellow gold Markings: 14K * [Stuller trademark] Size: 11 Method of Manufacture: cast and assembled Dimensions: ring tapers from approximately 18.55 to 6.15 mm wide and 8.7 to 1.15 mm thick Weight: 21.973 grams Settings: white gold round shared prong cluster plate Construction: good Condition: good Finish: polished The ring is a large tapered yellow gold dome style with a cushion-shaped top. A white gold round cluster plate is soldered into the ring top and raised slightly above a surrounding cast “fluted” bezel motif frame. The sides of the ring are ribbed in the style of a Rolex “Jubilee” bracelet and a tapered white gold plate forms the white center links on each side. Seven full cut diamonds are prong set into the ring top. Seven Full Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) one 4.3 mm (0.30 ct) six 3.5 – 3.7 mm (average 0.175 ct each) Estimated total weight: 1.35 ct Clarity: SI-2 to I-1 Color: I-L Exhibit fair cuts Replacement value (cost new): $ 4750.00
Lady’s Yellow Gold and Diamond Nugget Style Bracelet
Metal: 14K yellow gold Markings: 14K LSC PAT. 4697315 Length: 7 3/8 inches Method of Manufacture: cast and assembled Dimensions: rectangular bracelet links measure approximately 10.8 mm x 7.5 mm and 4.5 mm thick Weight: 40.913 grams Settings: six yellow gold tapered open back round four prong settings Construction: good for type Condition: good Finish: polished with textured recesses The bracelet consists of twenty-seven hinged rectangular nugget style links fastened with a hidden box style clasp with wire fold-over safety catch. Six prong settings are soldered flush into alternating drilled links along the center of the bracelet each set with a full cut diamond. Six Full Cut Natural Diamonds - Mounted Dimensions: approximately 3.0 – 3.2 mm (average 0.11 ct each) Estimated total weight: 0.66 ct Clarity: I-1 Color: J-L (faint brown) Exhibit fair cuts Replacement value (cost new): $ 4900.00
Lady’s Yellow/White Gold and Diamond Pendant on Chain
Pendant Metal: 14K yellow and white gold Markings: 14K JWBR Method of Manufacture: cast and assembled Dimensions: pendant measures approximately 20.6 x 18.3 mm in diameter and 3.8 mm thick Weight: 2.631 grams Settings: integrally cast shared prong settings and bezels Construction: fair Condition: good for type Finish: polished The pendant consists of three concentric circles graduated in size hinged together at the top and suspended from a small wire bail. Each circle is flush prong set fully around with a small cast round bezel centered at the top and raised on an open gallery. The inner and outer circles are white gold and set with near colorless full cut diamonds; the middle circle is yellow gold and set with irradiated yellow diamonds. The three bezels are set with irradiated yellow diamonds. The pendant is suspended from a small marked “585” 14K white gold cable rope chain measuring 19 ¾ inches long and 0.7mm in diameter. The chain fastens with a small spring ring clasp and weighs 0.640 grams. Fifty-five Full Cut Natural Diamonds - Mounted Dimensions: approximately 1.0 – 1.1 mm Estimated total weight: 0.35 ct Clarity: I-1 Color: H-I Exhibit fair cuts Twenty-nine Full Cut Natural Diamonds - Mounted Dimensions: (all measurements are approximate) twenty-six 1.1 – 1.2 mm three 1.3 – 1.4 mm Estimated total weight: 0.24 ct Clarity: I-1 Color: irradiated fancy vivid yellow Exhibit fair cuts Replacement value (cost new): $ 1200.00
Lady’s White Gold and Diamond Ring Pendant and Earring Suite
1) Ring Metal: 14K white gold Markings: 14K ½ TW JWBR Size: 7 Method of Manufacture: cast Dimensions: shank tapers from approximately 2.15 to 1.95 mm wide and 3.5 to 1.2 mm thick rectangular top measures 12.65 x 8.2 mm and stands 5.8 mm tall off the finger Weight: 4.260 grams Replacement value (cost new): $ 900.00 2) Lady’s White Gold and Diamond Pendant on Chain Metal: 14K white gold Markings: 14K ½ TW JWBR Replacement value (cost new): $ 850.00 3) Pair of White Gold and Diamond Earrings Metal: 14K white gold Markings: 14K JWBR FI 14 Method of Manufacture: assembled from cast and manufactured components Dimensions: rectangular bars measure approximately 11.8 x 7.3 mm and 4.2 mm thick Total Weight of Pair: 3.348 grams Replacement value (cost new): $ 950.00
White Gold and White/Black Diamond Ring and Pendant Set
1) Pendant Metal: 14K white gold Markings: 14K JWBR Replacement value (cost new): $ 1100.00 2) Ring Metal: 14K white gold Markings: 14K K [in a house-shaped frame] Size: 6 ¾Method of Manufacture: cast Dimensions: ring tapers from approximately 6.85 to 4.3 mm wide and 2.65 to 1.15 mm thick Weight: 5.02 grams Settings: integrally cast flush shared prong settings Construction: good Condition: good Finish: polished The ring is a tapered domed band design flush prong set across the top with four rows of full cut diamonds. A total of thirty four black diamonds are prong set in the center two rows and thirty near-colorless diamonds are prong set in the two outer rows. Thirty Full Cut Natural Diamonds - Mounted Dimensions: approximately 1.5 – 1.8 mm Estimated total weight: 0.50 ct Clarity: I-1 to I-2 Color: H-J Exhibit fair cuts Thirty-four Full Cut Treated Black Diamonds - Mounted Dimensions: approximately 1.3 – 1.4 mm Estimated total weight: 0.45 ct Clarity: opaque Color: irradiated black Exhibit poor cuts Replacement value (cost new): $ 1300.00
Set of Gold and Diamond Bangle Bracelet and Hoop Earrings
Bracelet Metal: 14K yellow gold Markings: 14K (unrecognized trademark) Size: outer oval diameter of 65 x 55 mm Replacement value (cost new): $ 1950.00 Earrings Metal: 10K yellow gold Markings: 10K HN (in an oval frame)Method of Manufacture: cast and assembled Dimensions: earrings measure approximately 29.5 mm long 21.6 mm across and 3.0 mm wide at the base Total Weight of Pair: 4.687 grams Replacement value (cost new): $ 650.00
Lady’s Pearl and Diamond Ring and Earring Set
1) Ring: 18K yellow gold Markings: 18KSize: 5Method of Manufacture: cast Dimensions: ring tapers from approximately 21 to 2.9 mm wide and 12.4 to 0.95 mm thick Weight: 8.811 grams Settings: six integrally cast four prong round settings Replacement value (cost new): $ 2150.00 2) EarringsMetal: 18K yellow gold Markings: 18K 750Method of Manufacture: cast and assembled Dimensions: each earring measures approximately 22.3 mm long 18.3 mm wide and 13.2 mm thick Total Weight of Pair: 16.050 grams Settings: six integrally cast four prong round settings Construction: fair Condition: fair Finish: polished with rhodium plated white finish on diamond-set plates Each earring features a large pearl surrounded by a framework of bead set diamond plates prong settings and gold scroll work raised on a lightweight cast wire gallery and fastened with a wire omega style clip back. The pearl is epoxied onto a post and the surrounding framework. Thirteen full cut diamonds are prong and bead set around each earring. Two Cultured Apparent South Sea Pearl – Mounted Size: approximately 11.6 – 11.8 mm Shape: near round Color: medium cream Luster: fair Nacre thickness: not apparent Surface texture: blemished Matching: good Twenty-six Full Cut Natural Diamonds – Mounted Dimensions: (all measurements are approximate)twenty 1.1 – 1.3 mm (0.009 ct each)six 2.3 mm (0.045 ct each) Estimated total weight: 0.45 ct Clarity: I-1 to I-3Color: J-L Exhibit fair to poor cuts:Replacement value (cost new): $ 3850.00
Lady’s Yellow Gold and Diamond Ring and Pendant Set
Ring Metal: 14K yellow gold Markings: 14K (H) © A PAT 6591633 Size: 7 Method of Manufacture: cast Dimensions: ring tapers from approximately 13.3 to 2.7 mm wide and 4.85 to 1.7 mm thick Weight: 5.741 gramsReplacement value (cost new): $ 1200.00 Pendant on Chain Metal: 14K yellow gold Markings: 14K (H) © A PAT 6591633 Method of Manufacture: cast Dimensions: pendant measures 13.2 mm long 6.3 mm wide and 4.8 mm thick Weight: 1.110 grams Replacement value (cost new): $ 850.00
White Gold Pearl and Diamond Pendant on Chain
Metal: 14K white gold Markings: 14K ADPG Method of Manufacture: cast pendant Dimensions: pendant measures approximately 16.9 mm square 23.7 mm long diagonally and 4.7 mm thick Weight: 2.812 grams Construction: good Condition: good Finish: polished with millgrain detailing along the top edges The pendant is an open square design oriented diagonally and flush prong set fully around with twenty-eight full cut diamonds. One cultured pearl is epoxied onto a post at the lower corner of the pendant. The pendant is suspended through a corner gallery opening from a marked “14KT ITALY ADPG” white gold diamond cut wheat chain measuring 17 inches long and 1.1 mm in diameter. The chain fastens with a small lobster claw clasp and weighs 2.565 grams. Twenty-eight Full Cut Natural Diamonds - Mounted Dimensions: approximately 1.0 mm Estimated total weight: 0.15 ct Clarity: VS to SI-1 Color: G-H Exhibit good cuts One Cultured Apparent Akoya Pearl - Mounted Size: 8.2 mm Shape: round Color: off-white with weak rosé overtones Luster: good Nacre thickness: not apparent – assumed acceptable Surface texture: clean Replacement value (cost new): $ 1300.00
