Iconic Firearms Collections at Auction, Day Two

Iconic Firearms Collections at Auction, Day Two

Monday, March 16, 2015  |  10:00 AM Eastern
Auction closed.
Iconic Firearms Collections at Auction, Day Two

Iconic Firearms Collections at Auction, Day Two

Monday, March 16, 2015  |  10:00 AM Eastern
Auction closed.
Internet Premium: 21%
See Special Terms for additional fees
Cash Payment Discount: 3%
Share:

Description

An Event for the Ages, this highly anticipated fresh to the market offering will be the focus of those passionate about firearms history.12 prestigious collections will be featured.

James D. Julia Inc.


(207) 453-7125
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 26

**DWM MAXIM MODEL 1910 HEAVY MACHINE GUN MADE FOR THE GOVERNMENT OF COSTA RICA (C&R).

Lot # 2025 (Sale Order: 26 of 639)      

SN 5623. 7 mm. 24" bbl. Made by DWM under contract for Costa Rica on orig DWM tripod SN 5620. Water jacket, feed shuttle, top cover, backplate, fusee cover retaining plate, muzzle and cross bolt are all matching. Bolt is numbered 5629A from same production run and likely swapped out when guns were all together in Costa Rica. Marked on fusee cover "DEUTSCHE WAFFEN-UND MUNITIONSFABRIKEN BERLIN 1910". Top cover displays a very attractive Costa Rican crest. Cork and chain plug for drain is not present. Mechanism functions smoothly when operated by hand. This weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is fine. 75% blue mostly turning to brown patina on water jacket and feed shuttle. Also loss of finish to high points and tripod attachment collar which shows as gray metal with some brown patina. Numerous scratches and light pitting on water jacket. Backplate wooden handles are cracked with some significant loss due to chipping particularly on left handle. Checkering is much worn. Also significant pitting to metal hardware of handles but they are still very serviceable. Bore is excellent, shiny and bright. Bolt face is excellent. Tripod retains about 60% of its orig dark green paint with significant chipping to legs and loss of finish to brown patina on elevation gear; attachment for knee pads not present; data plate marked "DEUTSCHE WAFFEN-UND MUNITIONSFABRIKEN BERLIN 1910"; traverse and elevation mechanism stiff but functional. This gun shows evidence of use and firing and is an excellent example of DWM quality. 4-51740 JK17

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 23,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**FLUTED JACKET VICKERS WATER COOLED MACHINE GUN (C&R).

Lot # 2026 (Sale Order: 27 of 639)      

SN 81384. Cal 303 British, 28". This "VSM" marked Vickers gun has a mixture of original and Australian manufactured parts. Top of water jacket and trunnion are marked "VSM", however brass feed block is marked "MA-42", indicating Australian manufacture. Bolt is SN U7342 with British proof marks. Rails and crosshead have broad arrow proof marks. Muzzle and booster is of the armored type. Water jacket, drain fitting, cork, and drain plug are present as is water fill plug. Rear sight is marked "3 VII NoII MKI". Firing mechanism functions smoothly when operated by hand. This weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is fine with over 90% blue finish on side plates, cover and water jacket. Water jacket has only a couple of slight dings. Fusee cover has turned a brown patina and has several dings and dents but is still completely serviceable. Wooden hand grips are in very good condition with some nicks and gouges. Bore has strong rifling, dark in the grooves. Muzzle and muzzle cup could use a good cleaning but appears very serviceable. This is a very attractive looking Vickers gun. Vickers are popular guns due to their quality design and ability to be converted to other calibers. 4-51735

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**SMOOTH JACKET WWII VICKERS MACHINE GUN ON FAKTS SIDE PLATE (FULLY TRANSFERABLE).

Lot # 2027 (Sale Order: 28 of 639)      

SN 2736. Cal 303, bbl 28-1/2". This Vickers was manufactured by Fred Kaase using one of his own manufactured transferable side plates and a 1941 dated Australian Vickers kit. Most parts are marked "MA 41". The Fusee cover is marked on the top "DP" indicating it was relegated for drill purpose use at some time in the past. Muzzle assembly is of the armored type. Drain plug and water fill plug are present but steam release brass cap and chain not present. 303 feed block is brass and marked "MA". Firing mechanism functions smoothly when operated by hand. Lock does not hold tension or cork. Othewise, this weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is excellent as refinished. 97%+ dark blue refinish on side plates, Fuzee cover, top cover and back plate. Water jacket is repainted green. Muzzle could use a good cleaning but has good blue coverage. Lock is dated 1936 and is SN JZ5147. Bolt face is clean around the firing pin and cannelure guides with some pitting in the area near the top of the Gibbs spring. Bore is shiny with strong rifling and some slight pitting. The Vickers gun is a great shooting platform adaptable to fire several different cartridges including 7.62 Russian. No doubt this will make a fine addition to a shooting enthusiasts collection. 4-51744

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 11,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**DWM MAXIM MG08 MACHINE GUN (C&R).

Lot # 2028 (Sale Order: 29 of 639)      

SN 46861. Cal. 8mm, bbl 30". This MG08 Maxim was made by D.W.M. in Berlin in 1918 and SN matches on top cover, feed shuttle, rear sight base, optical sight base, charging handle and back plate. Fusee cover appears to be an unnumbered armorers replacement. Handle brushes are both numbered 16 and could have been transposition of numbers when applied. Bbl is marked DWM and "18 together with cal designation 7.9". Bolt is a renumber from 318 to 3545. Connecting rod and cross head match gun SN. Water drain fitting at forward end of jacket not present nor is drain cock. Left oil cap retention spring broken off and not present. Included in this lot is an original repainted sled mount with trunnion bracket SN 3568. Firing mechanism functions smoothly when operated by hand. This weapon appears fully functional. Sled mount levers move freely, elevation mechanism operates smoothly. Knee pads, mounting hardware, spare bolt, spare bbl and tool box attachments are not present. A nicely lightened functional sled mount for the shooting enthusiast. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is very good with about 85% original blue finish remaining on side plates, cover and feed shuttle. Water jacket retains 60% of its blue finish turning mostly a gray patina with scattered old corrosion together with some dings and remnants of field gray paint around the front sight trunnion and water filler cap. Fusee spring cover retains about 80% of orig olive green colored paint with bare areas and gray patina with numerous dings and old scattered pitting. Side plates also have some scattered pitting. Feed shuttle retains about 80% of its blue finish with about a 1" square area of significant pitting on the left side. Wooden thumb piece extension on water filler cap not present but retaining chain is present. Wooden hand grips are cracked but serviceable. Checkering is well defined. Bore has crisp strong rifling. Sled mount is repainted an olive green with about 95% coverage. This is a very nice example of the German WWI Maxim gun and would be suitable for display or to take to the range. 4-51746

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**AUSTRIAN WWI SCHWARZLOSE MODEL 7/12 MANUFACTURED BY STEYR ON TRIPOD (C&R).

Lot # 2029 (Sale Order: 30 of 639)      

SN 23908. Cal 8x50mm, 21-1/2" bbl. This matching numbered Schwarzlose was manufactured by Steyr in 1917 and retains its drain lever intact as well has mostly intact water fill cap, oil fill cap and original sights. The steam hose fitting on the end of the water jacket is also present with 2 nuts and a washer. Tripod retains its attachment hardware and traverse blocks as well as pins with chain. Firing mechanism functions smoothly when operated by hand. This weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is very good with about 50% of the original finish remaining, mostly turning to a brown patina, particularly on the water jacket. Muzzle retains more of a blued finish, probably a refinish. Internals are in the white with the bolt itself having more of a brown patina and the main recoil spring, although strong and serviceable, has some spots of corrosion. Wooden handles are in good serviceable condition but have some dings and handling marks. Water fill plug has crack along the top edges and lost some material but is still serviceable and the brass retaining ring remains in place. Bore has strong rifling with some shine on the lands, somewhat darker in the grooves. Bolt face is in fine serviceable condition. Tripod retains 80% of green paint finish and adjustments in both elevation and traverse function properly. This is a scarce and sought after example of a quality made WWI machine gun. 4-51709

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 16,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**JAPANESE TYPE 92 HEAVY MACHINE GUN ON TRIPOD (C&R).

Lot # 2030 (Sale Order: 31 of 639)      

SN 36725. Cal 7mm Mauser, bbl 28". This type 92 HMG was manufactured by Hitachi in February 1942 as indicated by the markings on the left side of the receiver. Back plate, buffer and top cover match receiver SN. Bolt does not match nor does operating piston. Bbl not removed to check SN, but this is indeed a 7mm barrel not 7.7 Japanese. Ejection port cover is SN 418. Also marked in channel of charging handle "FAKTS" which indicates that at one time this arm was in the possession of Fred Kaase, a noted firearms enthusiast in Texas. Optic locking screws are not present. This weapon has an added appertinance bolted onto the bottom plate to adapt it to some kind of tripod, and trunnions have been extended by adding Allen screws holding extension knobs. It also has extensions screwed into both sides of the trunnion knobs which also indicate an adaptation to some kind of a tripod. Included with this gun is an original Japanese heavy gun tripod. SN 40833 made by Hitachi. Windage locking knob and leather boot at bottom of elevation shaft are not present but otherwise tripod is functional. Firing mechanism functions smoothly when operated by hand. This weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is fine. About 80% finish remaining overall fading to a gray patina, especially on the top cover and roller, also loss of finish on high points. Gun presents more of a gray finish coverage than dark black. Oiler brush is in good serviceable condition. Wooden handles are complete and serviceable but left one has several longitudinal cracks and both have some gouges and nicks. Rear sight seems to adjust properly. Bore has strong rifling, dark in the grooves. Bolt face in good serviceable condition. Tripod retains 85% olive green paint with loss of paint to the high edges as well as some chips and scattered spots of corrosion. Elevation works and locks properly and traverses freely back and forth. This would make a good shooting machine gun for the firearms enthusiast and also is an historic item from the Pacific theater of WWII. 4-51691

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 14,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**COLT BROWNING AIRCRAFT .30 CAL MACHINE GUN MG 40 AS REGISTERED BY MARANA ARMS (FULLY TRANSFERABLE)

Lot # 2031 (Sale Order: 32 of 639)      

SN 115993. Cal. 30-06, bbl 25-1/2". This Colt aircraft Browning machine gun retains its original receiver top plate to the rear of the top cover. Left side plate marked "COLT AC MG"/"30 CAL.". Right sight plate marked "REMFG. BY"/"MARANA ARMS MFG."/"MARANA, ARIZONA, U.S.A.". Bottom plate marked "MARANA ARMS MFG."/"MDL. H."/"SERIAL NO. II". Cocking handle not present but these are readily available from parts vendors. Firing trigger is an aluminum bar which pivots below the buffer assembly. Gun is currently set up to feed from left to right. Bolt operates smoothly within receiver and firing pin strike is strong. This weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance near excellent with over 95% of gray/blue finish remaining with loss of finish along high edges and on top of rivet of top cover. Bolt is in the white as is extractor. Firing actuator is non-anodized aluminum. Bottom of trunnion inside sideplates shows some evidence of welding. Bbl has an excellent bright bore. Bolt face is likewise in extremely clean condition.  These fast firing aircraft machine guns pack a lot of firepower and this one would no doubt be an impressive shooter on any range. 4-51726

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 11,000.00

You've been outbid  to g****x! to YOU!

Placing your bid. please wait...

**BROWNING 1919 A4 MACHINE GUN AS MANUFACTURED BY MARANA ARMS (FULLY TRANSFERABLE).

Lot # 2032 (Sale Order: 33 of 639)      

SN 4. Cal. 30-06, bbl 24". This is a standard Browning 1919A4 built on a Marana Arms registered sideplate. It includes a clamp on carrying handle just forward of the flip down front sight. Bolt is unmarked. Bolt hole open safety bracket is not present on right side of receiver. Rear sight bracket is bolted on with non-standard bolts but still looks appropriate even though holes have been drilled in a different position on left sideplate. Firing mechanism functions smoothly when operated by hand. This weapon appears fully functional. PROVENANCE: The class III weapons formerly on loan to Evergreen Aviation & Space Museum. CONDITION: Overall finish and appearance is fine with over 85% of a military gray finish remaining on the metal parts. There is a prominent weld seam on the right sideplate just above the cocking handle slot at the rear. There is also an area of weld below the stamped in Marana Arms manufactured marking where the gun SN has been stamped on the right sideplate. Sideplate is also stamped "MARANA ARMS MFG.  MOD. H MARANA AZ." on right sideplate. Below that are the standard Browning machine gun right sideplate markings. Bore has strong rifling, dark in the grooves. Bolt face is dark. This iconic American machine gun would be a good shooter. 4-51738

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**INGRAM MAC M10A1 9MM, 45 A.C.P. SUBMACHINE GUN (FULLY TRANSFERABLE).

Lot # 2033 (Sale Order: 34 of 639)      

SN A6041105. Cal. 45ACP with 6_ bbl like new in the box with one magazine and magazine loader. Also included is a 9mm upper, including bolt, buffer and bbl, and also 9mm magazine and mag loader. Firing mechanism functions smoothly when operated by hand. This weapon appears fully functional. Includes orig styrofoam packing box with cardboard oversleeve, with SN written on the side in black marker. CONDITION: Overall finish and appearance is as new in the box, with grey parkerized finish. Receiver is a parkerized grey while bbl is a high luster blue. 45 ACP magazine is lustrous blue and 9mm is parkerized. Condition of 45 ACP bore is excellent and bright. 9mm bore is also in extremely fine condition, although dusty. This would be a fine entry level submachine gun package in two popular and common calibers. 4-54026

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

***WALTHER MPK SUB MACHINE GUN (PRE-86 DEALER SAMPLE).

Lot # 2034 (Sale Order: 35 of 639)      

SN 5161. 9 MM. 7" bbl. This example has the Walther banner logo on left side of receiver followed by "MP Walther Cal. 9mm" also marked with eagle/"N" proof mark below "63" next to Walther proof mark to left of SN. Upper SN matches with eagle/"N" proof mark to left of this number as well as "Mod. Kurz". Bolt SN also matches. Lower assembly also has a marking within an oval just forward of rear sling swivel. Folding shoulder loop has gray hard rubber casing to provide comfort to the firer when aiming. Included in this lot are two 32-rnd magazines marked "MP 9 mm". Also included are both German and English versions of the Provisional Operation and Servicing Manuals, editions of 1963, which is when this gun was made. Mechanism functions smoothly when operated by hand. This gun appears fully functional. CONDITION: Overall finish and appearance is extremely fine with over 95% dark blue parkerized finish with scratches to bare metal in places and loss of finish at some high points. Bore is excellent, shiny and bright. Bolt face is extremely fine. There is a coat of dust in recessed areas from long term storage. Magazine finish is consistent with gun. This is a nice, fairly early example of this model and these seem to consistently run well. 4-51284 JK100

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

**ONE OF A KIND M110 SEMI-AUTOMATIC STONER RIFLE SNIPER SYSTEM SIGNED BY C. REED KNIGHT, WITH REGIST

Lot # 2035 (Sale Order: 36 of 639)      

SN KM090341. Cal. 7.62mm. Bbl 22". This is a complete sniper system as produced for the U.S. Military by C. Reed Knight of Knight's Manufacturing Co. This state of the art sniper system includes a Leupold 3.5-10X variable power daytime optic, a Harris swivel bipod and PALs magazine pouches, and its registered Class III suppressor in its own case all within its orig transit case complete with cleaning kit, four 20-rnd magazines and four 10-rnd magazines. This system is the product of extensive testing in competition in which this Knight's Armament manufactured rifle won and was selected for military use. Its semi-automatic capability and outstanding quality & accuracy, together with its ambidextrous features make it an ideal sniper's weapon. As of this cataloging, Reed Knight has confirmed that he has only ever signed two firearms, this being one of them, and there are very few examples of this model in private hands. CONDITION: Overall finish & appearance is excellent, test fired only, with battery for scope still in zip-lock bag, 20-rnd magazines still in their sealed, plastic bags and screws on scope mount unblemished in every respect. The condition is about as fine as possible. This is a tremendous opportunity for both the modern military enthusiast & rifle accuracy enthusiast. The fact that this comes with its orig Class III registered suppressor only enhances the attractiveness of this package. 4-54755 JWK35

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

*TIPPMANN ARMS CO. MODEL 1917 MINIATURE SEMI-AUTO REPLICA OF BROWNING 1917 A1 WATER COOLED MACHINE G

Lot # 2036 (Sale Order: 37 of 639)      

SN 001. Cal. 22 LR, bbl 11". This is the first SN'd gun of the semi-automatic Tippmann replicas of the Browning 1917A1 water cooled machine gun. This beautifully crafted firing replica includes brass and steel parts and includes a miniature tripod, traverse and elevation gear, 2 compartment wooden ammo box with belted ammunition and wooden crate made to hold this replica and its accessories. Firing mechanism functions smoothly when operated by hand. Traverse and elevation gear fits properly. This weapon appears fully functional as semi-auto only. CONDITION: Overall finish and appearance is simply outstanding with near 100% glossy blue finish on steel parts with attractive shiny brass nose cap, filler and drain plugs, rear trunnion and feed shuttle block. Wooden hand grips are of an attractive brown color with a brass escutcheon. Tripod likewise near excellent as is traverse and elevation mechanism. Internal parts show that the bolt has been back and forth and there is evidence that it has been fired. Bore is near excellent, shiny and bright. Bolt face is also excellent. It would be hard to imagine a more attractive little conversation piece in a den or office 4-54049

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

EXTREMELY RARE CONFEDERATE NEW ORLEANS MADE 12-POUND BRONZE NAPOLEON ON CARRIAGE WITH LIMBER.

Lot # 2037 (Sale Order: 38 of 639)      

Please Note (3/11/15): We have just received some additional history on this cannon. It was NOT taken to New York, but was according to Wayne Stark's 1984 Cannon Registry, donated to a GAR Post #134 in 1946 and was on display at the local GAR in Wood River, Nebraska until it eventually sold. It was also featured on a television series "Sons of Guns" on Discovery Channel in 2010. SN 30. This spectacular gun, just recently discovered, is the only privately owned New Orleans made Napoleon cannon. Bronze gun metal was not available to the foundries in New Orleans so a proclamation was sent out from Gen. P.G.T. Beauregard to the Southern States to send their bells to N.O. to help the war effort. This is no doubt one of the Napoleons cast by Leeds from bells sent to New Orleans from churches, plantations and such across the South. Records of Leeds & Co, New Orleans indicate they shipped two light 12 pdrs on the December 19, 1861…probably foundry #19 & 20; by February 19th they shipped four more #5,30,37,and 38. Robertson's Alabama Battery had four Leeds Napoleons on Ruggles line at Shiloh in April of '62 of which gun was most likely one. The Federals reported capturing six Leeds Napoleons after the battle of Missionary Ridge. It seems safe to say this gun was at Shiloh and quite possibly captured at Missionary Ridge. The other five known examples listed in Field Artillery Weapons of the Civil War by Hazlett, Olmstead & Parks, 2004 are all in museums or owned by National Park Service. Other listed existing SNs are 19, which is at the Petersburg National Battlefield Park; SN 38, at John Browning Museum, Rock Island. IL; SNs 45 & 53, on display at Augusta Arsenal Museum, GA; and SN 49, at Carlisle Barracks, PA. SN 30, which we offer here, is in beautiful condition with complete markings as on other examples: "1862" on left trunnion, "LEEDS & CO. NEW ORLEANS" on right trunnion. This cannon is mounted on an exacting #2 regulation field carriage with limber and implements. This cannon is ready to be taken into the field and get revenge on the Yankees who originally captured her and took her to New York. This is the only Confederate Napoleon to ever be offered at public auction and we can find only two Confederate 6-pound bronze tubes ever auctioned in the last 30 years. There are no more than 4 or 5 Confederate bronze Napoleons by any maker that are privately owned; this is your opportunity to get the most desirable bronze Confederate cannon extant. CONDITION: Very good as can be seen in photographs, as is carriage and limber. Markings are crisp and fine. 4-54465

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 305,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

RARE & HISTORIC U.S. NAVY LIGHT BRONZE 12-POUNDER DAHLGREN BOAT HOWITZER AND ORIGINAL CARRIAGE.

Lot # 2038 (Sale Order: 39 of 639)      

SN 53. This Howitzer is one of the most historically important and interesting cannon in this collection. It's history is well documented by SN from records in the National Archives. This cannon is beautifully marked and dated on top of bbl "12PDR / BOAT HOWITZER / 1858 / F.K.M." (Francis Key Murray was U.S. Naval inspector for only one year, 1858). Cannon marked at breech "US NAVY YARD WASHINGTON, 430 LBS, 26PRE" (26 refers to preponderance weight). John Dahlgren was always concerned with this measurement & all his guns are so marked. This term refers to how heavy the breech is when you lift it when pivoted at the center of the barrel's trunnion loop. SN 53 also found on bbl. Muzzle is stamped with the initials "CM" inside diamond. Olmstead, Stark & Tucker 1997 THE BIG GUNS, CIVIL WAR SEIGE, SEACOAST & NAVAL CANNON pp. 109: "Nearly half the surviving boat howitzers made at the Washington Navy Yard, have one or two initials in sequence stamped on their lower muzzle faces. One series runs from 1855 to 1864; another starting anew, runs from 1864 to 1874....John L. Morris deduced that these might code each piece produced at the Yard, equivalent to familiar private foundry numbers. We broadly confirm this theory by a scan of 70 known stampings of varying legibility. Roughly one in three thus far recorded is enclosed within a crude diamond, of unknown significance if any, formed by four strikes of a small cold chisel." The carriage is SN 16 and its weight is marked as 322 lbs. This rare, light howitzer served on three different vessels during the Civil War Era. From about 1858 to early 1861 the steamer WYANDOTTE carried the howitzer, before it was transferred to the steam sloop VANDALIA. The next ship on which it would see service was the steam sloop JUNIATA which captured 5 Confederate blockade runners and helped capture Ft. Fisher near Wilmington, NC. While this weapon was aboard, it no doubt saw action, very likely with one of the landing parties JUNIATA sent into the amphibious assault on the fort. Postwar the howitzer armed the steam tug PINTA until 1911, an unusually long career for any weapon, some 53 years. The piece is very interesting technically as well. The boat howitzers were invented by Admiral John Dahlgren, USN, in the late 1840s to provide a suitable artillery piece which could be carried by boat to shore, then be easily landed and ready for use. The boat howitzer had a special carriage so that it could be fired from the bow of a boat, then readily dismounted from that carriage and remounted on a steel carriage for use ashore. The steel carriage was carried in the stern of the boat. The howitzers were designed to be fired by means of a special bronze percussion lock which was integral to the piece. A third wheel at the rear of the carriage could be raised for firing or lowered for traveling. This example is particularly fine and among the best if not the finest known of only 20 surviving guns. Accompanying cannon is a very rare artillery-man's pass box for this gun still retaining leather carrying strap. This light boat howitzer is one of only two or three surviving of the earliest pattern, with large blade front sight and central rear-sight hole. In about 1860 the design was changed and the large front sight was replaced by a very small front sight at center-side location, matched by an offset rear-sight hole, which most collectors agree bears no comparison, aesthetically, to Dahlgren's handsome first pattern. There is a large file of documentation on this particular cannon and its use aboard the USS JUNIATA. PROVENANCE: James Hastings Collection. Springfield Arsenal, LLC Artillery Collection. CONDITION: Tube and carriage overall are in fine condition, wheels are accurate reproductions. Bore and vent are clean and smooth. All markings are all crisp and discernible as can be seen in photos. Percussion lock is orig but was replaced at some point in service as SN is 170 and inspection date is 1871. Pass box very good overall; strap is fragile but complete, "LT. 12 PDR" still discernible in white paint. Cannon and carriage are 94" overall; tube is 51" overall with bbl length of 44-1/2". 4-54098 JS131

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 80,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

RARE AND UNIQUE JAMES BYERS BRONZE 6-POUNDER CANNON MADE FOR THE STATE OF NEW YORK.

Lot # 2039 (Sale Order: 40 of 639)      

NSN. This cannon is thought to be among the earliest American made bronze cannon manufactured after Independence. Tube is engraved in script "SNY" monogram (State of New York) on top of bbl, forward of breech. There is a large "6" (6-pounder) engraved on top of barrel between muzzle and trunnions. Weight is engraved on back of breech in quarter-weights 5.3.22 which translates to over 650 lbs. This cannon is in beautiful condition with fine turquoise colored patina with well discerned markings and fine, smooth bore. Surviving records for Byers Foundry prior to the National Armory being built on his site show contract with State of New York in late 1790's and several 6lb cannon apparently being delivered. Style, breech and cascabel design are consistent with a 3-pounder Byers attributed cannon in part one of the Springfield Arsenal, LLC sale from October 2014. PROVENANCE: Naples, Florida Collection; Springfield Arsenal, LLC Artillery Collection. CONDITION: Markings all discernible as can be seen in photographs. Cannon is very good to fine overall with mostly green fading to chocolate colored patina. Markings engraved on bbl are outlined in punch dot decorated "frames", the script "SNY" being 6" x 4" and the "6" is in a 6" x 3" oval. Surface has typical small dents, dings and scratches, but surface overall is fine. Vent is clear as is bore. There are two holes drilled to right of iron sleeved vent where a gunlock had been added for continued use along with cut-out modification for rear band to mount the lock. 4-54195

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

ONLY SURVIVING SPECIMEN, DANIEL TREADWELL MODEL 1841 IRON & STEEL 6-POUNDER GUN.

Lot # 2040 (Sale Order: 41 of 639)      

NSN. This cannon which was tested by US government in 1843 closely resembles its bronze counterpart and this rare and unique survivor is aptly described in Hazlett, Olmstead & Parks Field Artillery Weapons of the Civil War on pgs. 42 & 43. "Another approach turned backward nearly to the origins of cannon. Schemes for built-up cannon became widespread, among which was Harvard professor Daniel Treadwell's proposal to combine the best features of iron and steel. His eventual English patent of 19 June 1855 described reinforcing cannon with hoops screwed and shrunk onto the body of the piece. On 9 March 1842 he was awarded two contracts, one for six, the other for one ‘6-pounder gun, of a combination of steel and iron.' Nine such pieces-two of them numbered ‘8'-were inspected and proved by William Wade and Rufus L. Baker on 15, 16, and 17 August 1843. Their dimensions were identical with those of the bronze Model of 1841 with the addition of a band from 8 to 8.5 inches wide, with 8.4-inch diameter, for the trunnions. Against an intended weight of 880 pounds, the eight whose weight was recorded averaged from 780 to 816 pounds, averaging 72 pounds underweight. A second summary tally in the contract record identified the material as ‘a combination of wrought iron and steel.' There is no clue whether threading or shrinkage or both were featured in these pieces, none of which has been found. Nothing has been learned of their fates." It is interesting to note that this single example has turned up after the publication of this definitive 1997 text. Professor Treadwell was a brilliant physicist, engineer and philosopher. He was a self-made millionaire in the early 19th century from his textile machine inventions alone. He built the cannon forging plant with his own money to make new steel cannon. Henry Wadsworth Longfellow depicted his friend, Professor Treadwell while a Harvard Professor as the fictional theologian in Tales From the Wayside Inn published in 1863. PROVENANCE: Bannermans. Val Forgett; Springfield Arsenal, LLC Artillery Collection. CONDITION: Pitted overall with no discernible markings under black paint. Vent has a 3/4" hexagonal nut as part of a removed ignition device where two holes remain for bracket for hammer. Bore is clear, though rusted and pitted. 4-54210 JS258

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

EXCEPTIONAL CIVIL WAR 24-POUND US FLANK HOWITZER MADE IN 1863.

Lot # 2041 (Sale Order: 42 of 639)      

24-pound flank Howitzers were first made in the late 1840's by several manufacturers. Only 50 were made by Cyrus Alger during the Civil War. However, total production of flank Howitzers from the 1840's through the Civil War was about 600 cannon, of which many have survived. Most survivors are displayed outside or as part of monuments, many with markings which are no longer discernible. This particular tube is no doubt the finest survivor in condition not much different than when it was made, at least externally, with very fine markings. PROVENANCE: College in Cedar Rapids, IA; Springfield Arsenal, LLC Artillery Collection. CONDITION: Very fine overall. Smooth surfaces painted black. Markings are as crisp & fine as found on any Civil War cannon. No. 1452 (foundry number) found on rimbase just above right trunnion. Muzzle is marked "C. A. & Co. (Cyrus Alger & Co, Boston, Massachusetts) 1488(lbs), 1863, T. J. R. (Inspector Thomas Jackson Rodman), No. 305 (registry number)." Bore is smooth with rust & pitting, vent is plugged. Original tool & lathe marks are visible on tube, none better. This cannon had been stored indoors since the war. 4-54221

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 27,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

EXTREMELY FINE AMES CIVIL WAR 24-POUND COEHORN MORTAR.

Lot # 2042 (Sale Order: 43 of 639)      

SN 208. This is a very fine example of a Civil War bronze cannon with many examples that saw great and hard use at the end of the Civil War, especially in the trenches around Richmond and at Petersburg, VA. This pattern, even though introduced in the United States in 1838, were scarce and were unavailable during the Vicksburg campaign in July of 1863 where they would have been used to great affect. General Grant wrote of improvising cannon to throw common shells into the trenches as he had no Coehorns at Vicksburg where they could have been used effectively. 200 Coehorns were produced after this proclamation by the end of the war. This particular tube is in near pristine condition and one of the very last made, being dated 1865 and inspected by William Augustus Marye, though his inspection marks are not present here or on other examples noted. Registry number on muzzle is 208, weight is 162 lbs and foundry number on rimbase is 272. This is a fairly scarce Civil War cannon, as even though Ames made 200 of these during the war, most were melted over the years for their 160 lbs of bronze. You won't find a better example of this mortar anywhere especially with the orig shipping tompion with steel ring. This cannon is unmounted but simple iron trimmed wood mounts are readily available. PROVENANCE: Hal Fillinger, Horsham, PA; Springfield Arsenal, LLC Artillery Collection. CONDITION: Fine overall with smooth bronze patina & crisp markings. Tompion is dried & slightly shrunk, and does not fit bore tightly. Iron tompion mounts are rusted & pitted. 4-54133 JS149

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 29,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

MASSIVE 5-TON PATTERN 1844 8-INCH COLUMBIAD SEACOAST SIEGE GUN.

Lot # 2043 (Sale Order: 44 of 639)      

NSN. Of the 61 8" Columbiads, pattern 1844 made by Cyrus Alger & Co., only 21 survived and this is the only example in private hands. This gun is beautifully marked and at a mere 5 tons of unique American history would make a marvelous addition to any collection where one could brag that my gun is bigger than your gun. This gun conforms to other guns of pattern measuring 119", 124" including cascabel. These seacoast Columbiads were America's first line of defense against naval attack as these guns could easily sink most any vessel coming close enough to take direct shots and that is the reason most all harbors in the world had forts. This particular gun is marked on muzzle face "B.H." (for ordnance inspector Benjamin Huger who later became a Confederate General) and registry number "44". Left trunnion is dated "1855" right trunnion is marked, "C.A. & CO / BOSTON". Breech is marked with weight of 9,105 lbs. *SPECIAL NOTE* This cannon is not at our facilities. It currently resides on the front lawn of John Morris' home in Springfield, VA, 703-309-0228. It is illustrated and described here and can only be viewed at the above address. If you wish to view it, please call John Morris to set up a mutually convenient appointment to examine. Mr. Morris also has an extraordinary depth of knowledge of cannons in general, and in addition to viewing the cannon in person, it will provide you an opportunity to speak with him and access any information that may be helpful to you regarding the cannon. This cannon will stay on Mr. Morris' lawn until such time the winning bidder has paid for his purchase and made arrangements for the pickup of the cannon. Mr. Morris is experienced in moving heavy cannons and will advise and assist buyer or buyer's carrier in loading them on vehicles for highway transportation. To repeat, this cannon cannot be previewed at the auction site. PROVENANCE: Allentown, PA LLC; Springfield Arsenal, LLC Artillery Collection. CONDITION: Pitted overall but markings all discernible as can be seen in photographs. 4-54190 JS281

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 32,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

AMES MODEL 1841 BRONZE 6-POUNDER GUN ON ORIGINAL CARRIAGE.

Lot # 2044 (Sale Order: 45 of 639)      

SN 131. This is a wonderful 6-pounder with great color on orig carriage with only the trail wood that is not orig, however all of the irons are orig and correct. This may be the only orig carriage of its type in extant. Cannon is marked "131 JWR" on muzzle face. "N.P. AMES" / "FOUNDER" / "SPRINGFIELD MASS" is found on left trunnion and right trunnion is dated "1844". Carriage cheek pieces are Watervliet Arsenal marked and dated 1843. Consignor states, "This piece is believed to be one of a pair of 6-pounders which appear in the official Ordnance Returns for Fort Adams during the mid-1800s. The Fort is in Newport, R.I. The piece was acquired from a Newport private LLC in 1978, where it and a twin had apparently been placed after being "disposed of" by the Fort. The twin is now in the possession of the Newport Artillery company. The carriage of the piece is all orig except for the trail, in which only the wood has been replaced. All of the metal is in excellent condition. Wheels are orig and one has had wood restoration. This may be the only orig carriage of its type in existence. It is currently painted gray, except for the metal parts which are gloss black. PROVENANCE: Ft. Adams, Newport, RI; Springfield Arsenal, LLC Artillery Collection. CONDITION: Very good to fine overall. Typical surface with numerous small blemishes, markings are all discernible as can be seen in photos. Carriage is solid and painted as described. 4-54193 JS162

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 80,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

RARE CIVIL WAR 8" SIEGE MORTAR.

Lot # 2045 (Sale Order: 46 of 639)      

SN 19. Marvelous condition and great markings. You will never find a better example. This gun is beautifully marked on muzzle with registry "No. 19", inspected "TJR" (Thomas J. Rodman), "1026 LBS" "1863" "C.A. & CO" for Cyrus Alger & Company, Boston, Massachusetts. These mortars saw heavy service in all theaters of war where they could be transported. During the Civil War there were 170 8" - model 1861 - siege mortars produced by three different contractors, though 89 are known surviving, few are privately owned. PROVENANCE: Ron Weaver Collection, Springfield Arsenal, LLC Artillery Collection. CONDITION: Cannon carriage measures about 56" l x about 23" trunnion to trunnion. At about 34" wide overall, height is about 32" and overall weight on exacting reproduction carriage is slightly less than a ton. Cannon & carriage are painted black. Metal surfaces of mortar & carriage are smooth where machined and markings are crisp and well defined as can be seen in photos. Bore is fairly smooth near muzzle but rusted & pitted at base. 4-54228

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 30,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

ARSENAL MODEL U.S. 13" SIEGE MORTAR "THE DICTATOR".

Lot # 2046 (Sale Order: 47 of 639)      

Among the most famous cannon of the Civil War was the 13" siege mortar mounted on railroad car that wreaked havoc to the Confederate's in their works in Petersburg, VA. Full-sized mortar weighed in at about 8-1/2 tons and threw a ball that weighed over 200 lbs. The orig cannon was cast for Fort Pitt, and this faithful well-made model closely approximates it dimensionally. The consignor has reason to believe this model was cast at Ft. Pitt in the same way that foundry cast small models of their 15 and 20-inch guns. PROVENANCE: Howard Hoffman, Springfield Arsenal, LLC Artillery Collection. CONDITION: Fine overall, painted black, model weighs 28 lbs, including carriage. Overall 10" l x 5" w, bbl is 5-1/2" l x 4" dia with a 1.25" bore. 4-54093

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

PAIR OF LARGE IRON WAR OF 1812 US NAVAL SWIVEL GUNS.

Lot # 2047 (Sale Order: 48 of 639)      

This large pair of iron one-pounder swivel guns is thought by our consignor to be American because of the unusual cast projections on breeches, the overall profile, and the location of the markings. The rectangular-cross-section projections at the breech have wrought-iron bands with the remains of broken-off "monkey tails" which were used to aim swivel guns. Cannons have typical lines of the late 18th century with bands and flared muzzle. Bores are two inches (one-pounder.) Baserings are marked with numbers in the 200-299 range which are a bit difficult to decipher but seem to be either weight or serial number marks. There are also some numbers marked underneath the centers of the guns. These guns are similar in profile to their French bronze contemporaries known as "Pierrier" of which there are a few examples in this sale. The US copied or was at least heavily influenced by French artillery designs during the late 18th-early 19th century. The reason the US did not use bronze for these naval swivel guns, as the French did, was due to an edict issued in 1800 by Secretary of War Henry Dearborn that all US cannon would thereafter be cast from iron. The consignor knows of only two other examples of this particular model of swivel cannon. PROVENANCE: Mark McConnell; Springfield Arsenal, LLC Artillery Collection. CONDITION: Tubes are about 44", bbl length 36", trunnions distance 11". Good overall. Tubes are good to very good overall with pitting, remnants of old black paint, tillers are broken off but their bases & rings are still attached. 2-1/4" bores are clear but pitted. Bbls have not been weighed but each gun is probably about 250-300 lbs each. 4-54207

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

CIVIL WAR ERA RARE & UNIQUE 1.5 INCH WHITWORTH BREECH LOADING CANNON.

Lot # 2048 (Sale Order: 49 of 639)      

NSN. This very rare Whitworth is seen in an 1860 Vintage photograph being test fired. The carriage accompanying this barrel was copied from the carriage seen in this photograph. This cannon was originally purchased in Thailand along with other obsolete weapons in the 1960's. Whitworth, a prolific inventive genius, designed revolutionary breechloading and muzzle-loading rifles, cannons, and special projectiles for them to achieve greater accuracy than standard military arms of mid-19th century England. Various calibers of muzzle and breech loading cannons, based upon his extremely long range, phenomenally accurate hexagonally rifled system, were sold to the Confederacy and other countries. His introduction of new standards of accuracy in measurement and machining characterized his weapons, which were made to tolerances of a few ten-thousandths of an inch, unheard-of in the 1850's. No other specimens of this exact gun are known. Whitworth identified his 1-1/2" gun as a "3-pounder". This contemporary description of testing is revealing: "In February last the Whitworth gun was tried on the sands at Southport, Lancashire...The 3-pounder, with an elevation of 35 degrees attained a maximum range of 9688 yards; at 20 degrees, 7073 yards; at 10 degrees, 4281 yards. 'Nor was the accuracy less marvelous than the range-at 9580 yards the average lateral deviation was not quite 20 yards, at 9015 only 11 yards, at 6793 only 4 yards, at 1579 yards (not quite a mile) only 18 inches!...The charge for the 3-pounder is 8 ounces...The result of these experiments seems to be that the Whitworth exceeds the Armstrong in range, but does not equal it in accuracy. The Whitworth 3-pounder is 6 feet in length and weighs 208 lbs., with a bore of 1.5 inches" (The Annual Register, Or a view of the History and politics of the Year 1860, LONDON:PRINTED FOR J.& F.H. RIVINGTON; p.206. LITERATURE: The Artilleryman Magazine Spring, 1986. Cannon is accompanied by facsimile photograph of it being fired in test in 1860. This may be the only Whitworth piece of field artillery of the Civil War era to ever be offered. PROVENANCE: Springfield Arsenal, LLC Artillery Collection. CONDITION: Overall dimensions of gun are 82-1/2", internal bbl length if 77", overall length of bbl on carriage is about 10' and overall width is about 58". External metal pitted overall such that no marks are discernible. Bore & rifling in good condition. Breech threads in good condition such that breech can be screwed closed & opened easily. Carriage is well made, sound & solid. 4-54208 JS167

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 35,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

ARSENAL MODEL DAHLGREN 15" NAVY GUN AND CARRIAGE.

Lot # 2049 (Sale Order: 50 of 639)      

NSN. This is an extremely well made and detailed model of a Civil War era Dahlgren Naval gun. This model is 1/10" scale and measures 20" overall with a 1.5" bore diameter. Carriage is wrought iron or steel measuring 9.62" in length less wheels and 6.4" wide. Bbl is cast iron measuring 18.12" overall with a bore length of 15.5" (muzzle face to rear of chamber). This model has two vents and two associated sets of percussion "lock ears", only the right hand vent is drilled through to bore. Within the US Navy's series of 15" gun designs, this is unique to the pattern of 1870. This was the last pattern of US Navy muzzle-loading 15" gun to see production. Since all 20 of this pattern gun were cast by Ft. Pitt Foundry it is most likely this model was built there as well. There are no markings other than matching assembly punch marks. Similar high quality models were built in this era at the Washington Navy Yard and the New York Navy Yard. Most of the known official US Navy models bear markings similar to the full scale models they represent. However, the workmanship and precision with which this piece was executed is typical of surviving models in the USNA Museum Collection at Annapolis. PROVENANCE: Hampton P. Howell, Jr. Collection. Springfield Arsenal, LLC Artillery Collection. CONDITION: Fine overall. Smooth iron and steel patinas. This model may have once had a percussion lock hammer which is now missing. Toggle bar at top of elevating screw is also missing. 4-54081 JS124

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 2 of 26

1.178.0.1842.dd73747.9.5