1.5 MGY Biodiesel Equipment Package & Cogen System
Auction closed.
Auction closed.
1.5 MGY Biodiesel Equipment Package & Cogen System
Auction closed.
Auction closed.
Description
Online Equipment Auction: 1.5 Million Gallon Per Year Biodiesel Equipment Package/250 Kilowatt Cat Generator/Cogen System
x Cancel
Closed Lots
WESTWARD® AIR COMPRESSOR
4ME96 Powered by DAYTON 3.2 hp Electric Motor, Mounted on a 60 gal. Vertical Air Receiver Tank, (NOTE: The Compressor has been Removed and was Not Found on the Premises.).
TANK, BOILER FUEL TANK
No. 2 Fuel Oil, 330 gal. capacity, Oval, Mounted on 4- 12 in. high (approx.) Pipe Legs. Tank Only, No Piping.
TECO LOT 37 (approx.) VARIABLE SPEED DRIVE UNITS
MA 7200 and FM 100 Consisting of but not necessarily limited to: 1- TECO MA7200; 10- TECO FM 100 Fluxmaster; 4- TECO FM 100 Fluxmaster, 4- TECO FM 100 Fluxmaster; 3- TECO FM 100 Fluxmaster; 1- TECO N3 AC Drive. (NOTE: These are Wall Mounted in the Boiler/Air Compressor Room) With 3- TECO FM100; 3- TECO FM 100 1- SIEMENS Type P1 250 amp Electrical Control Box Panel E Circuit Breaker, (NOTE: These are on the North Wall of the Production Room.) With 3- FM 100 Big VFD, 3- FM 100 Medium VFD, 1- Electrical Circuit Breaker Panel E. (Location-North Wall Inside) With 5- SIEMENS MOTOR STARTER CONTROL BOXES (Location-North Wall Outside) With EATON CUTLER HAMMER PANEL A 208Y/120V, 3 PHASE, 4 WATT CIRCUIT BREAKER PANEL Wall Mounted, having 400 amp. Main Breaker and Breakers for 7-VFD Modules. (Location-North Wall Inside) Additional photos of this item (and many others) can be found at www.maascompanies.com.
OIL DRY CORPORATION OF AMERICA LOT 6 PALLETS OIL DRY
Select 450 Bag Size 40 lbs./18 kg, (NOTE: 4- Pallets contain 60- Bags per Pallet, and 1- Pallet contains 12- Bags) and 1- Pallet of Select 450 Bag Size 40 lbs./18 kg (NOTE: Pallet contains 36- Bags).
SIEBRING MFG. INC. FORCED AIR HEATER
HW 250 72718 250,000 BTU Heat Input, Multi-Fuel. With TABLE, WORK Fabricated Carbon Steel, 42 in. high x 60 in. long x 53 in. wide having an Air Compressor powered by Electric Motor on Air Receiver Tank and a 1 in. (est.) Gear Pump powered by Electric Motor. With TANK, OIL STORAGE 330 gal., Oval, Upright, Steel, mounted on 12 in. tall (approx.) Pipe Legs having Agitator/Mixer powered by EMERSON .5 hp Electric Motor. Additional photos of this item (and many others) can be found at www.maascompanies.com.
PLATFORM SCALE
Having a 24 in. x 42 in. Load Cell and MTI Digital Read-Out, 250 kg x 100 g, 500 lbs. x 0.2 lbs. capacity.
LOT 2 TANK COMPONENTS, FABRICATION
Carbon Steel, consisting of but not necessarily limited to: 4- Domed Caps, min. thickness .235 in., Heads are Head Cold Formed, Sidewalls are 54 in. dia. x .250NX2, overall height 15.625 ft., Nucor Steel A/SA516-70.
LOT 3 HOSES
Consisting of but not necessarily limited to: 1- 4 in. x 12 ft. long (est.) having QC End Coupling Fittings, 1- 4 in. x 47 in. long (est.) having QC End Coupling Fittings, and 1-2-1/2 in. x 15 ft. long (est.) having QC End Coupling Fittings.
LOT 9 JOINTS PIPE, CARBON STEEL
2-1/2 in to 1/2 in. OD, 1- Joint is 2 in. x 21 ft. long (approx.) Threaded; 2- Joints are 2-1/2 in. x 4 ft. long (approx.) Square Cut.
ADVANCE TABCO SINK, TRIPLE, STAINLESS STEEL
T-9-6-54 18RL 27 in. wide x 76 in. long having a Left Hand Drain Platform.
LIFT RITE PALLET JACK, MANUAL
500 lb. capacity. With MATERIAL HAND TRUCK With Pneumatic Wheels. With 3- MATERIAL DOLLIES 2- are Square 30 in. x 30 in. (approx.), 1- is 30 in. x 60 in. (est.)
LOT 4 TOTES, FRYER OIL
Plastic, 150 gal. (est.) capacity each, having Hinged Top Lid Fill Port with Mesh Screen for Large Solids. With 2- TANKS Fiberglass, 400 gal. (est.) Vertical, Flat Bottom, Open Top.
LOT PLUMBING RELATED FITTINGS, PARTS AND SUPPLIES
Consisting of but not necessarily limited to: For 2-1/2 in. Pipe: 12-(approx.) 90° Ells, 5- (approx.) Tees, 3- (approx.) Unions, 9- (approx.) Nipples 6 in. long and shorter, 3- (approx.) Plugs, 1- Cap, 12- (approx.) Fittings for 4 in.; with 1- Shelf containing various Stainless Steel Fittings and various Fittings for 2 in. and 1 in. Pipe; 1- Plastic Crate containing 15- (est.) 2 in. and smaller Weld Neck Fittings, 90° Ells, Tees, and Flanges, 2 in. to 1/2 in. (est.). With 1- Tub, Plastic containing 12- (approx.) QD Fittings 3 in. (est.), 24- (est.) Gaskets 6 in. to 1-1/2 in. (est.) ID (NOTE: Most appear to be New); 3- Plastic Crates (Both Partially Filled) containing QC Fittings, 3 in. and 1-1/2 in. ID; (NOTE: 2- Boxes contain Metal Fittings with 1- Box containing PVC Fittings) 1- Crate Valves, Brass, 2-1/2 in. Ball, threaded and other Brass Fittings. Additional photos of this item (and many others) can be found at www.maascompanies.com.
LOT 60 (approx.) BARRELS, PLASTIC
55 gal. and 30 gal. (est.), 29- (approx.) are 55 gal., 8- (approx.) are 30 gal., 30- (approx.) are Steel, and 7- (approx.) are Plastic,; 24- HPPE 55 gal. Drums having full opening Top with Steel Closing Rings.
ACE ROTO-MOLD TANK
1,000 gal (est.) Horizontal, HDPE, with 4- Saddle Tank Supports; 1- Tank 500 gal. (est.) Horizontal, HDPE. Additional photos of this item (and many others) can be found at www.maascompanies.com.
WORLD LIFT FORK LIFT
WFG50C 0302523297 (Mfg. Pre-2003 (est.) 5,000 lbs. capacity (est.), LPG powered Engine, 2- Stage Mast, ROPS Protection Device, Clear and Caution Lights, solid Warehouse Tires, 0840 Indicated Meter Hours. Additional photos of this item (and many others) can be found at www.maascompanies.com.
LOT 12 (approx.) SECTIONS FIBERGLASS LIQUID SPILL CONTAINMENT FENCING
14 in. high x 12 ft. long (approx.) with Flanges to secure the Foundations.
WACKER NEUSON SUMP PUMP
PD 3 Powered by HONDA GX120 Air Cooled Gasoline Engine, with 4- Cartridge Type Filter Units.
CAT LOT GENERATOR
LC5 G5A00638 250 Kw, 313KVA Standby Rating, 3- Phase, 12- Wire WYE Parallel Wound, powered by CAT C9 398 hp Turbo Charged Diesel Engine s/n 69L00431 (Mfg. 2006), 1976.1 Hours, Turbocharged, DC Electric Starter, Part No. 5672900101, Radiator, s/n M18553, having CAT Generator Control Panel with EMCP3.2 Digital Human Interface Control Panel and No. 240-87036 Authentication Panel, 1- HARCO Exhaust Muffler having Flex Expansion Coupling, Elevated 30 gal. capacity Expansion Tank. With SENA BATTERY CHARGER, AUTOMATIC TWO RATE REGULATED With 15 ft. high x 6 ft. wide x 10 ft. long (approx.) Fabricated Steel Support Tower, All are Unitized and Mounted on a 14 in. high x 63 in. wide x 134 in. long Fabricated 2- Beam Steel Base. With PALLET INSULATION BLANKETS FOR THE ENGINE MUFFLER (NOTE: Apparently New/Unused, Never Installed on the Gen Set.) (NOTE: Stored on the Top of the 25 ft. long Sea-land Shipping container in the NW corner of the Room.) Additional photos of this item (and many others) can be found at www.maascompanies.com.
EASTERN TANKS LOT 3 FUEL TANKS, HORIZONTAL, OVAL, ABOVE GROUND
1149087 (Mfg. 07/2008); 1622 (Mfg. 05/2007); and 1621 Mfg. 05/2007) Carbon Steel, 330 gal. capacity Each, 12 ga./2.5 mm Metal Thickness, Each mounted on 4- 12 in. high (approx.) Pipe Legs, with connecting Piping and Electrical Wiring, Manifold, Each with SCULLY SIGNAL CO. Sight Fuel Level Gauge. Co. Nos. 1, 2, and 3. Additional photos of this item (and many others) can be found at www.maascompanies.com.
