Firearms Day 1

Firearms Day 1

Monday, June 25, 2018  |  9:00 AM Eastern
Auction closed.
Firearms Day 1

Firearms Day 1

Monday, June 25, 2018  |  9:00 AM Eastern
Auction closed.
Internet Premium: 26%
See Special Terms for additional fees
Cash Payment Discount: 3%
Share:

Description

Auction starts at 9am (EST)

Morphy Auctions


(877) 968-8880
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 8 of 22

(A) Early U.S. Colt Single Action Army Cavalry Revolver.

Lot # 178 (Sale Order: 176 of 545)      

This Cavalry revolver is accompanied by a John Kopek letter, stating that this serial number was manufactured in 1875, inspected by Samuel B. Lewis with A.P. Casey sub-inspector in charge. Kopek indicates this revolver was part of an order for 100 pistols January 7th, 1875 destined for the state of Iowa, but could have originated from a missing report. The National Archives state that a revolver was issued to Company F 6th Cavalry as of August 3rd, 1888. The fact that this revolver, 16392, still remains in original cavalry configuration with all matching numbers strongly indicates that it escaped the recall as it was stored in a state armory. You will find matching numbers on barrel, frame, cylinder, trigger guard and backstrap. You will find the "L" stamp for Lewis under the barrel, on trigger guard and on top of backstrap, as well as back of cylinder (all matching). Another indication that this revolver was stored at a State Militia is its current condition; the barrel is a soft brown patina with razor sharp legends and bright blue under the extractor. The extractor has bright blue in recesses, frame exhibits traces of case colors, straps are grey patina with some blue on trigger guard. Cylinder is a soft brown patina with blue in flutes. Fairly straight screw heads with generous amounts of blue finish. Has the early donut-style ejector head. One piece walnut grips that are in very good condition with the exception of slight chip at front toes. Early two line patent address with "US" stamp. Left walnut grip panel has a visible but not readable cartouche. Indexes and locks up with all four clicks. Strong, clean, near mint rifling. Extremely nice and clean early production Colt Cavalry.Barrel Length: 7 - 1/2"Caliber/Bore: .45 LCFFL Status: AntiqueManufacturer: ColtModel: Single Action ArmyPaperwork : YesSerial Number: 16392
This Cavalry revolver is accompanied by a John Kopek letter, stating that this serial number was manufactured in 1875, inspected by Samuel B. Lewis with A.P. Casey sub-in...morespector in charge. Kopek indicates this revolver was part of an order for 100 pistols January 7th, 1875 destined for the state of Iowa, but could have originated from a missing report. The National Archives state that a revolver was issued to Company F 6th Cavalry as of August 3rd, 1888. The fact that this revolver, 16392, still remains in original cavalry configuration with all matching numbers strongly indicates that it escaped the recall as it was stored in a state armory. You will find matching numbers on barrel, frame, cylinder, trigger guard and backstrap. You will find the "L" stamp for Lewis under the barrel, on trigger guard and on top of backstrap, as well as back of cylinder (all matching). Another indication that this revolver was stored at a State Militia is its current condition; the barrel is a soft brown patina with razor sharp legends and bright blue under the extractor. The extractor has bright blue in recesses, frame exhibits traces of case colors, straps are grey patina with some blue on trigger guard. Cylinder is a soft brown patina with blue in flutes. Fairly straight screw heads with generous amounts of blue finish. Has the early donut-style ejector head. One piece walnut grips that are in very good condition with the exception of slight chip at front toes. Early two line patent address with "US" stamp. Left walnut grip panel has a visible but not readable cartouche. Indexes and locks up with all four clicks. Strong, clean, near mint rifling. Extremely nice and clean early production Colt Cavalry.Barrel Length: 7 - 1/2"Caliber/Bore: .45 LCFFL Status: AntiqueManufacturer: ColtModel: Single Action ArmyPaperwork : YesSerial Number: 16392

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Scarce High Condition Long Barrel Colt Model 1862 Police Pocket Percussion Revolver (1861).

Lot # 179 (Sale Order: 177 of 545)      

You will find full or partial matching serial numbers on frame, barrel, cylinder, trigger guard, backstrap and wedge. The Colt high polish royal blue stands out on the barrel with approximately 95% still present mixing with some area of brown patina. The cylinder, likewise, displays approximately 85% of this blue finish. Case colors on hammer, lever and frame are nearly all there, most of which are still brilliant. Trigger guard and backstrap retain approximately 10%, most of which is under the trigger guard. Screw heads retains the majority of their Nitre finish. Varnished one piece walnut grips are near mint. Action indexes and locks up like new. Near mint to mint bore. If it were not for the plating loss and high edge cylinder wear, the gun would be near new inside and out. From the Jim Linton Collection.Barrel Length: 6 - 1/2"Caliber/Bore: .36 PercussionFFL Status: AntiqueManufacturer: ColtModel: 1862 PolicePaperwork : No Serial Number: 8372
You will find full or partial matching serial numbers on frame, barrel, cylinder, trigger guard, backstrap and wedge. The Colt high polish royal blue stands out on the b...morearrel with approximately 95% still present mixing with some area of brown patina. The cylinder, likewise, displays approximately 85% of this blue finish. Case colors on hammer, lever and frame are nearly all there, most of which are still brilliant. Trigger guard and backstrap retain approximately 10%, most of which is under the trigger guard. Screw heads retains the majority of their Nitre finish. Varnished one piece walnut grips are near mint. Action indexes and locks up like new. Near mint to mint bore. If it were not for the plating loss and high edge cylinder wear, the gun would be near new inside and out. From the Jim Linton Collection.Barrel Length: 6 - 1/2"Caliber/Bore: .36 PercussionFFL Status: AntiqueManufacturer: ColtModel: 1862 PolicePaperwork : No Serial Number: 8372

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) High Condition Colt 1865 Pocket Navy Percussion Revolver.

Lot # 180 (Sale Order: 178 of 545)      

This has to be one of the finest, high condition 1865 Models extant. The octagon barrel retains approximately 95% of its original factory high polish with New York address and bright rifling. Wedge has original blue. Loading lever has 100% original case colors. Cylinder has stagecoach scene, completely readable, retaining 85-90% of the original factory high polish blue with original nipples and all visible safety pins. 98% case colors on frame and hammer, mostly bright. Traces of plating on backstrap. 80% plating on trigger guard. Locks up and indexes as new. Simply stunning. From the Jim Linton Collection.Barrel Length: 5 - 1/2"Caliber/Bore: .36 PercussionFFL Status: AntiqueManufacturer: Colt Model: 1865 Pocket NavyPaperwork : No Serial Number: 13275
This has to be one of the finest, high condition 1865 Models extant. The octagon barrel retains approximately 95% of its original factory high polish with New York addre...moress and bright rifling. Wedge has original blue. Loading lever has 100% original case colors. Cylinder has stagecoach scene, completely readable, retaining 85-90% of the original factory high polish blue with original nipples and all visible safety pins. 98% case colors on frame and hammer, mostly bright. Traces of plating on backstrap. 80% plating on trigger guard. Locks up and indexes as new. Simply stunning. From the Jim Linton Collection.Barrel Length: 5 - 1/2"Caliber/Bore: .36 PercussionFFL Status: AntiqueManufacturer: Colt Model: 1865 Pocket NavyPaperwork : No Serial Number: 13275

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Spectacular Winchester Model 1866 Musket with Bayonet (1870-71).

Lot # 181 (Sale Order: 179 of 545)      

Magazine tube with three bands, center with sling loop, Barley Corn front sight, 900 yd ladder rear sight with retaining screw. Top of barrel in front of rear sight marked “WINCHESTER’S – REPEATING – ARMS. NEW HAVEN.CT./KING’S IMPROVEMENT – PATENTED – MARCH 29.1866. OCTOBER 16 1860”. Standard receiver mounted with straight grain walnut, straight grip, brass carbine buttplate with trapdoor, inlet base with sling swivel 3-3/4" from toe, 17-1/8" forearm with two bands. Extremely fine; barrel retains 90-95% orig blue with some thinning around front sight and muzzle, some fine scratching between front and center bands and a few other normal light nicks and scratches. Magazine tube shows most original blue with a couple minor spots showing silver patina. Front and center bands retain strong original blue blending with some silver and brown patina. Rear band has flaked with some orig blue showing but mostly a brown mixed with silver patina. Receiver has a mustard patina with some minor nicks and scratches, sharp edges with loading gate showing nearly all orig nitre blue. Hammer retains most original case colors with some faint silvering on right side. Lever retains original colors in protected areas blending with brown and silver patina mix. Stock is sound with some minor nicks, small dings, retaining most of original finish. Forend is sound with some minor nicks and dings and usual scratches and retains original finish blending with some hand worn patina. Mechanics are crisp with a bright shiny bore. Accompanied with the Winchester bright steel bayonet in near new condition. From the Jim Linton Collection.Accessories: BayonetBarrel Length: 26"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 49724
Magazine tube with three bands, center with sling loop, Barley Corn front sight, 900 yd ladder rear sight with retaining screw. Top of barrel in front of rear sight marke...mored “WINCHESTER’S – REPEATING – ARMS. NEW HAVEN.CT./KING’S IMPROVEMENT – PATENTED – MARCH 29.1866. OCTOBER 16 1860”. Standard receiver mounted with straight grain walnut, straight grip, brass carbine buttplate with trapdoor, inlet base with sling swivel 3-3/4" from toe, 17-1/8" forearm with two bands. Extremely fine; barrel retains 90-95% orig blue with some thinning around front sight and muzzle, some fine scratching between front and center bands and a few other normal light nicks and scratches. Magazine tube shows most original blue with a couple minor spots showing silver patina. Front and center bands retain strong original blue blending with some silver and brown patina. Rear band has flaked with some orig blue showing but mostly a brown mixed with silver patina. Receiver has a mustard patina with some minor nicks and scratches, sharp edges with loading gate showing nearly all orig nitre blue. Hammer retains most original case colors with some faint silvering on right side. Lever retains original colors in protected areas blending with brown and silver patina mix. Stock is sound with some minor nicks, small dings, retaining most of original finish. Forend is sound with some minor nicks and dings and usual scratches and retains original finish blending with some hand worn patina. Mechanics are crisp with a bright shiny bore. Accompanied with the Winchester bright steel bayonet in near new condition. From the Jim Linton Collection.Accessories: BayonetBarrel Length: 26"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 49724

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 17,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Outstanding Engraved Like 1 of 1000 Winchester Model 1873 Lever Action Rifle (1878).

Lot # 182 (Sale Order: 180 of 545)      

Fine Second Model 1873 rifle with rare 30" octagon barrel, full magazine, German silver Rocky Mountain blade front sight, original short, semi-buckhorn rear sight with checkered edges and a thick base rear tang sight with 4" staff. Mounted with beautiful XXX flame grain American walnut with early style checkered walnut forearm and checkered straight wrist butt and crescent butt plate. Receiver is second type with checkered thumbprint dust cover with screw attached dust cover rail. Left side of tang under wood is marked XXX with assembly No. 845 and is matching to buttplate and stock mortise markings. The barrel over the chamber area is engraved in a scroll and vine with dot punch shaded background with silver band. Muzzle is engraved in matching scroll and vine and silver band. Case colored receiver is game scene engraved with grazing antlered deer and surrounded with floral arabesques pattern in the Ulrich tradition. Right side of receiver is engraved with same scroll and vine with out game scene. Heel of case colored butt plate and forend cap are engraved wit same floral scroll patterns. Accompanied with this rifle is documentation from the Buffalo Bill Historical Center dated April 2004 listing the rifle serial No. 31222 as rifle, casehardened, 30" barrel, octagon, set trigger, checkered stock, engraved, swivels and received in warehouse September 19th, 1878 and shipped to customer No. 13085 the same day. This outstanding and well documented rifle is in the same style as the Second Model '1 of 1000' rifle shipped during the same time frame but with out the traditional 1 of 1000 engraving over chamber area. Condition. Very good as showing slight Restoration. The barrel and magazine retain most all of their contemporary finish with very slight edge wear on corners of barrel flats and high pints of muzzle and magazine cap. Case colored receiver has turned some what silver with colors present in protected ares with balance attaining a fine and pleasant uncleaned patina. Bore and mechanics are very fine. Checkered walnut stocks are excellent and have signs of being cleaned at an earlier date and a contemporary addition coat of finish applied. Wood is proud and shows no sign of sanding or repair. Truly a fine specimen and would be the center of any great Winchester collection. Featured in the book "The Story of The Winchester by Edmund E. Lewis" on pages 135 and 136.Barrel Length: 30"Caliber/Bore: .44 WCFFFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: YesSerial Number: 31222
Fine Second Model 1873 rifle with rare 30" octagon barrel, full magazine, German silver Rocky Mountain blade front sight, original short, semi-buckhorn rear sight with ch...moreeckered edges and a thick base rear tang sight with 4" staff. Mounted with beautiful XXX flame grain American walnut with early style checkered walnut forearm and checkered straight wrist butt and crescent butt plate. Receiver is second type with checkered thumbprint dust cover with screw attached dust cover rail. Left side of tang under wood is marked XXX with assembly No. 845 and is matching to buttplate and stock mortise markings. The barrel over the chamber area is engraved in a scroll and vine with dot punch shaded background with silver band. Muzzle is engraved in matching scroll and vine and silver band. Case colored receiver is game scene engraved with grazing antlered deer and surrounded with floral arabesques pattern in the Ulrich tradition. Right side of receiver is engraved with same scroll and vine with out game scene. Heel of case colored butt plate and forend cap are engraved wit same floral scroll patterns. Accompanied with this rifle is documentation from the Buffalo Bill Historical Center dated April 2004 listing the rifle serial No. 31222 as rifle, casehardened, 30" barrel, octagon, set trigger, checkered stock, engraved, swivels and received in warehouse September 19th, 1878 and shipped to customer No. 13085 the same day. This outstanding and well documented rifle is in the same style as the Second Model '1 of 1000' rifle shipped during the same time frame but with out the traditional 1 of 1000 engraving over chamber area. Condition. Very good as showing slight Restoration. The barrel and magazine retain most all of their contemporary finish with very slight edge wear on corners of barrel flats and high pints of muzzle and magazine cap. Case colored receiver has turned some what silver with colors present in protected ares with balance attaining a fine and pleasant uncleaned patina. Bore and mechanics are very fine. Checkered walnut stocks are excellent and have signs of being cleaned at an earlier date and a contemporary addition coat of finish applied. Wood is proud and shows no sign of sanding or repair. Truly a fine specimen and would be the center of any great Winchester collection. Featured in the book "The Story of The Winchester by Edmund E. Lewis" on pages 135 and 136.Barrel Length: 30"Caliber/Bore: .44 WCFFFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: YesSerial Number: 31222

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 29,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Extraordinary Martially Marked Henry Repeating Rifle (1863).

Lot # 183 (Sale Order: 181 of 545)      

With the gun lying on a table and viewing under a standard fluorescent desk light, the blue on the barrel and tube appears to have almost 100% of the reapplied blue with just a hint of muzzle wear. When examined under a lighted magnifying glass, you can see that it is really a mix of light blue with patina age freckling throughout, starting to thin. The right side of the octagon barrel on the flat is stamped "C.G.C. / H.", the "H" stands for B. Tyler Henry found on the majority of militia inspected rifles under serial number 6000. This same "H" can be found stamped on the lower tang, twice on the right front side of frame, and on the left side of buttplate at upper left heel. "C.G.C." represents Charles G. Curtis, a civilian employee of the Ordnance Department who was assigned to the inspection of contract arms in the late 1850's and during the Civil War, to include the Henry rifle. This same "C.G.C." cartouche is stamped vertically on the right side of the wrist well back from the frame, confirming the block letter initials that appear on the right barrel flat. Initials on the barrel flat were stamped with a three-character die. The "CGC" in box cartouche on the wrist is visible with the naked eye but requires magnifying glass to fully read it. The mustard color brass frame and buttplate have never been touched, are not splotchy and are simply aged to a magnificent smooth mustard patina. The edges on both the barrel and frame are as sharp and tight as the day they were manufactured. All of the top mounted screws at tang and buttplate are lined up at 12 o'clock and have not been removed for serial numbers, but are guaranteed to match if you choose to take this gun apart. All of the screws retain generous amounts of the original blue finish. Two bottom frame screws show some light marring from tightening. The hammer and lever, which were originally case colored, are a rich grey patina with some existing pattern. Walnut buttstock is near mint, proud to metal with nary a scratch or crack, and you can still feel and see the raised grain. The Henry bump on left side of stock is immediately obvious to the naked eye. Bolt is free of pitting or rust and is basically a silvery-blue finish. When looking down into the well of the receiver, it is immediately obvious that it is extremely clean and devoid of any corrosion or damage of any kind. Rifle was not equipped with any swivel attachments. The receiver shape is the early version with slight bevel. Hammer is a standard Henry hammer. Rifle has the early small trigger retaining pin. Sight dovetail is only near the breech of the barrel as pictured on page 73, serial No. 4234. Has the later, larger barrel address stamping that reads "HENRYS PATENT OCT 16, 1860 MANUFACT'D BY THE NEWHAVEN ARMS CO. NEWHAVEN. CT."; page 75. The standard finish on the Henry rifle barrel is a high polish bright blue. Magazine cartridge follower is brass and of the larger, later variation; page 80. The receiver slot, to accept charger, shows the milled flats as seen on page 81. Stock comb is the last buttstock angle, which appears on rifles after serial number 3200; page 90. This rifled post-dates the perch belly stock base. A picture of the bump and its explanation can be seen on pages 95 and 96. Buttplate is the early style with rounded heel and has a trapdoor that has held an original four piece hickory and metal cleaning rod. This is an early type, unmarked, and can be seen in the top photo on page 103. The front sight is the ladder style profile which tapers downward toward muzzle which can be seen on pages 120 and 121; rear sight, as found on page 122, is a Type C with the 900 yard stamped on top and no top screw. This is considered a Type I U.S. Martial Henry rifle in all respects. Bore is extremely clean with razor sharp lands and grooves, and the action is flawless. Truly an outstanding example of one of the most famous and recognizable American made weapons ever produced that would be nearly impossible to improve upon. An investment grade Henry for those who desire only the finest. (All of the technical information supplied in this description was obtained from the book "The Story of Benjamin Tyler Henry and His Famed Repeating Rifle" but Les Quick, the definitive guide on this subject.)Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: Lever ActionPaperwork: YesSerial Number: 3938 CORRECTION: According to records obtained by Springfield Research from the U.S. Archives in Washington, D.C., serial No. 3938 was issued to Stephen Andersen. He enlisted for one year on April 1st, 1865 at Ft. Stoneman.
With the gun lying on a table and viewing under a standard fluorescent desk light, the blue on the barrel and tube appears to have almost 100% of the reapplied blue with ...morejust a hint of muzzle wear. When examined under a lighted magnifying glass, you can see that it is really a mix of light blue with patina age freckling throughout, starting to thin. The right side of the octagon barrel on the flat is stamped "C.G.C. / H.", the "H" stands for B. Tyler Henry found on the majority of militia inspected rifles under serial number 6000. This same "H" can be found stamped on the lower tang, twice on the right front side of frame, and on the left side of buttplate at upper left heel. "C.G.C." represents Charles G. Curtis, a civilian employee of the Ordnance Department who was assigned to the inspection of contract arms in the late 1850's and during the Civil War, to include the Henry rifle. This same "C.G.C." cartouche is stamped vertically on the right side of the wrist well back from the frame, confirming the block letter initials that appear on the right barrel flat. Initials on the barrel flat were stamped with a three-character die. The "CGC" in box cartouche on the wrist is visible with the naked eye but requires magnifying glass to fully read it. The mustard color brass frame and buttplate have never been touched, are not splotchy and are simply aged to a magnificent smooth mustard patina. The edges on both the barrel and frame are as sharp and tight as the day they were manufactured. All of the top mounted screws at tang and buttplate are lined up at 12 o'clock and have not been removed for serial numbers, but are guaranteed to match if you choose to take this gun apart. All of the screws retain generous amounts of the original blue finish. Two bottom frame screws show some light marring from tightening. The hammer and lever, which were originally case colored, are a rich grey patina with some existing pattern. Walnut buttstock is near mint, proud to metal with nary a scratch or crack, and you can still feel and see the raised grain. The Henry bump on left side of stock is immediately obvious to the naked eye. Bolt is free of pitting or rust and is basically a silvery-blue finish. When looking down into the well of the receiver, it is immediately obvious that it is extremely clean and devoid of any corrosion or damage of any kind. Rifle was not equipped with any swivel attachments. The receiver shape is the early version with slight bevel. Hammer is a standard Henry hammer. Rifle has the early small trigger retaining pin. Sight dovetail is only near the breech of the barrel as pictured on page 73, serial No. 4234. Has the later, larger barrel address stamping that reads "HENRYS PATENT OCT 16, 1860 MANUFACT'D BY THE NEWHAVEN ARMS CO. NEWHAVEN. CT."; page 75. The standard finish on the Henry rifle barrel is a high polish bright blue. Magazine cartridge follower is brass and of the larger, later variation; page 80. The receiver slot, to accept charger, shows the milled flats as seen on page 81. Stock comb is the last buttstock angle, which appears on rifles after serial number 3200; page 90. This rifled post-dates the perch belly stock base. A picture of the bump and its explanation can be seen on pages 95 and 96. Buttplate is the early style with rounded heel and has a trapdoor that has held an original four piece hickory and metal cleaning rod. This is an early type, unmarked, and can be seen in the top photo on page 103. The front sight is the ladder style profile which tapers downward toward muzzle which can be seen on pages 120 and 121; rear sight, as found on page 122, is a Type C with the 900 yard stamped on top and no top screw. This is considered a Type I U.S. Martial Henry rifle in all respects. Bore is extremely clean with razor sharp lands and grooves, and the action is flawless. Truly an outstanding example of one of the most famous and recognizable American made weapons ever produced that would be nearly impossible to improve upon. An investment grade Henry for those who desire only the finest. (All of the technical information supplied in this description was obtained from the book "The Story of Benjamin Tyler Henry and His Famed Repeating Rifle" but Les Quick, the definitive guide on this subject.)Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: Lever ActionPaperwork: YesSerial Number: 3938 CORRECTION: According to records obtained by Springfield Research from the U.S. Archives in Washington, D.C., serial No. 3938 was issued to Stephen Andersen. He enlisted for one year on April 1st, 1865 at Ft. Stoneman.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 42,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Exceptionally Fine and Rare Percussion Silver Mounted Deringer Rifle Owned by Edwin Forrest.

Lot # 184 (Sale Order: 182 of 545)      

This rifle is featured on pages 108 and 109 of "Steel Canvas: The Art of American Arms" by R.L. Wilson. The caption states that this rifle was displayed in an elaborate case in Edwin Forrest's home in Philadelphia, Pennsylvania along with matching dueling pistols by Deringer. Edwin Forrest (1806-1872) was probably the most popular American actor of his day. In 1823, according to his memoirs, he became friends with James and Rezin Bowie and at some point was given Jim Bowie’s favorite knife. Whether Forrest in some of his grandiose recollections actually possessed Jim Bowie’s Bowie or not, the knife along with this Deringer rifle, are among spectacular arms that he did own in the mid-19th century. As Mr. Forrest had no heirs, he established the Edwin Forrest Home near Philadelphia as a retirement home for old actors. In an arms display case were various arms belonging to Forrest along with his other effects that the Board of Governors of the the Edwin Forrest Home sold in 1988. Regardless of any history this is no doubt among the most beautiful Henry Deringer rifles extant. The rifle features an octagonal rifled steel barrel with steel underib and ramrod ferrules and a decorated muzzle face. The patent breech is scroll engraved and signed "H/DERINGER/PHILA".The rifle features target sights and an additional dovetail with a steel placeholder towards the breech. Back-action percussion lockplate and hammer are finely scroll engraved and tail inscribed "Deringer" in Gothic lettering. Features double set triggers. Finely engraved silver furniture includes a four piece patchbox with five piercings and horn release button on toeplate. Trigger guard, buttplate, toeplate and nipple reservoir behind trigger guard are all chased with ornate scrollwork. Unengraved silver barrel key escutcheons, small trident-shaped sideplate and small vacant wrist escutcheon. Highly figured burl walnut halfstock with checkered wrist and engraved silver endcap. Complete with steel-tipped wooden ramrod. Fine condition, overall. Barrel and lock retain a smooth grey metal surface with scattered minor blemishes. Trigger guard with a professional repair. Markings and engraving are crisp. Stock shows a few scattered dents and scratches and a few short cracks to burl from age. Wrist has a minor crack from rear of lock through escutcheon and to trigger plate and from below hammer and under triggerguard, stopping short of breech. This is an extraordinary and rare Deringer rifle with great provenance!Barrel Length: 39 - 1/2"Caliber/Bore: .50 RifledFFL Status: AntiqueManufacturer: Henry DeringerModel: Percussion RiflePaperwork: YesSerial Number: NSN
This rifle is featured on pages 108 and 109 of "Steel Canvas: The Art of American Arms" by R.L. Wilson. The caption states that this rifle was displayed in an elaborate...more case in Edwin Forrest's home in Philadelphia, Pennsylvania along with matching dueling pistols by Deringer. Edwin Forrest (1806-1872) was probably the most popular American actor of his day. In 1823, according to his memoirs, he became friends with James and Rezin Bowie and at some point was given Jim Bowie’s favorite knife. Whether Forrest in some of his grandiose recollections actually possessed Jim Bowie’s Bowie or not, the knife along with this Deringer rifle, are among spectacular arms that he did own in the mid-19th century. As Mr. Forrest had no heirs, he established the Edwin Forrest Home near Philadelphia as a retirement home for old actors. In an arms display case were various arms belonging to Forrest along with his other effects that the Board of Governors of the the Edwin Forrest Home sold in 1988. Regardless of any history this is no doubt among the most beautiful Henry Deringer rifles extant. The rifle features an octagonal rifled steel barrel with steel underib and ramrod ferrules and a decorated muzzle face. The patent breech is scroll engraved and signed "H/DERINGER/PHILA".The rifle features target sights and an additional dovetail with a steel placeholder towards the breech. Back-action percussion lockplate and hammer are finely scroll engraved and tail inscribed "Deringer" in Gothic lettering. Features double set triggers. Finely engraved silver furniture includes a four piece patchbox with five piercings and horn release button on toeplate. Trigger guard, buttplate, toeplate and nipple reservoir behind trigger guard are all chased with ornate scrollwork. Unengraved silver barrel key escutcheons, small trident-shaped sideplate and small vacant wrist escutcheon. Highly figured burl walnut halfstock with checkered wrist and engraved silver endcap. Complete with steel-tipped wooden ramrod. Fine condition, overall. Barrel and lock retain a smooth grey metal surface with scattered minor blemishes. Trigger guard with a professional repair. Markings and engraving are crisp. Stock shows a few scattered dents and scratches and a few short cracks to burl from age. Wrist has a minor crack from rear of lock through escutcheon and to trigger plate and from below hammer and under triggerguard, stopping short of breech. This is an extraordinary and rare Deringer rifle with great provenance!Barrel Length: 39 - 1/2"Caliber/Bore: .50 RifledFFL Status: AntiqueManufacturer: Henry DeringerModel: Percussion RiflePaperwork: YesSerial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 24,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Magnificent New Haven Arms Model 1860 Henry Lever Action Rifle (1862).

Lot # 185 (Sale Order: 183 of 545)      

Early first model Henry, octagon barrel with integral magazine tube. It has a German silver front sight blade and 1,000 yard first type Henry ladder rear sight. The receiver has the early style dovetail through the top flat and the early style rounded heel brass buttplate with trap. The serial number appears on the left side of the lower tang under the wood, in the top tang channel and inside the tang of the buttplate, as well as on all of the buttstock screws. Extremely fine plus. Barrel and magazine tube retain 85-90% strong bright original blue with light muzzle and sharp edge wear, some minor thinning on the side flats. Receiver is crisp with sharp edges and retains a beautiful medium mustard patina. Buttstock is sound and retains 97-98% strong bright original varnish with minor handling and use marks and a few small nicks and light bruises. Lever retains traces of case colors in the sheltered areas, being mostly a light patina. Hammer retains about 50% case colors with brilliant spots on the sides, dark elsewhere. Mechanics are crisp and it has a bright shiny bore with a few spots of light pitting. From the Jim Linton Collection.Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: 1860Paperwork: YesSerial Number: 733
Early first model Henry, octagon barrel with integral magazine tube. It has a German silver front sight blade and 1,000 yard first type Henry ladder rear sight. The recei...morever has the early style dovetail through the top flat and the early style rounded heel brass buttplate with trap. The serial number appears on the left side of the lower tang under the wood, in the top tang channel and inside the tang of the buttplate, as well as on all of the buttstock screws. Extremely fine plus. Barrel and magazine tube retain 85-90% strong bright original blue with light muzzle and sharp edge wear, some minor thinning on the side flats. Receiver is crisp with sharp edges and retains a beautiful medium mustard patina. Buttstock is sound and retains 97-98% strong bright original varnish with minor handling and use marks and a few small nicks and light bruises. Lever retains traces of case colors in the sheltered areas, being mostly a light patina. Hammer retains about 50% case colors with brilliant spots on the sides, dark elsewhere. Mechanics are crisp and it has a bright shiny bore with a few spots of light pitting. From the Jim Linton Collection.Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: 1860Paperwork: YesSerial Number: 733

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 47,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Fine Paterson/Colt No. 2 Ring Lever Revolving Rifle.

Lot # 186 (Sale Order: 184 of 545)      

Manufactured 1838 through 1841. Full octagon barrel has star and snake address "PATENT ARMS Mg. Co. PATERSON NJ. COLT'S Pt.". Eight shot cylinder with ring pattern cocking system. American walnut stock with cheek rest and crescent buttplate. Approximately 500 Second Model revolving rifles where produced. Several improvements where introduced during the production of the Second Model; the primary one being the change from a square back cylinder to a rounded back cylinder, to reduce the risk of spent caps from binding the rotation of the cylinder. The next significant change was the creation of the capper cut-out on the right side of the recoil shield as the First Models. The Paterson Second Model ring trigger was also purchased in a limited quantity by the Republic of Texas. These iconic firearms where the start of it all when it comes to the American small arms progression and ingenuity. Very good overall. Metal surfaces have attained a mellow patina with a mixture bright steel. Bore and mechanics are very good and in proper functioning order. Sights are of a more contemporary replacement but look good and appropriate. Walnut stock is very solid with no cracks or material loss but are very slightly undersized at butt plate. Serial No. 401 has been observed on rear of cylinder, breech of barrel and both wedges. Rear wedge appears to be a replacement. No further disassembly was done. This is a wonderful fresh to market Paterson revolving rifle and will surely be a great addition to a well balanced collection.Barrel Length: 24"Caliber/Bore: .44 percussionFFL Status: AntiqueManufacturer: Paterson/ColtModel: Paterson No. 2 Ring LeverPaperwork: No Serial Number: 401
Manufactured 1838 through 1841. Full octagon barrel has star and snake address "PATENT ARMS Mg. Co. PATERSON NJ. COLT'S Pt.". Eight shot cylinder with ring pattern cockin...moreg system. American walnut stock with cheek rest and crescent buttplate. Approximately 500 Second Model revolving rifles where produced. Several improvements where introduced during the production of the Second Model; the primary one being the change from a square back cylinder to a rounded back cylinder, to reduce the risk of spent caps from binding the rotation of the cylinder. The next significant change was the creation of the capper cut-out on the right side of the recoil shield as the First Models. The Paterson Second Model ring trigger was also purchased in a limited quantity by the Republic of Texas. These iconic firearms where the start of it all when it comes to the American small arms progression and ingenuity. Very good overall. Metal surfaces have attained a mellow patina with a mixture bright steel. Bore and mechanics are very good and in proper functioning order. Sights are of a more contemporary replacement but look good and appropriate. Walnut stock is very solid with no cracks or material loss but are very slightly undersized at butt plate. Serial No. 401 has been observed on rear of cylinder, breech of barrel and both wedges. Rear wedge appears to be a replacement. No further disassembly was done. This is a wonderful fresh to market Paterson revolving rifle and will surely be a great addition to a well balanced collection.Barrel Length: 24"Caliber/Bore: .44 percussionFFL Status: AntiqueManufacturer: Paterson/ColtModel: Paterson No. 2 Ring LeverPaperwork: No Serial Number: 401

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 22,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Winchester 1885 Low Wall & Grouping Attributed to Pawnee Bill's Wife, May Lillie.

Lot # 187 (Sale Order: 185 of 545)      

Manufactured 1887. Shipped March 6th, 1888 with full octagon barrel, walnut stocks, plain trigger, sporting sights. Barrel is apleasing mix of blue and soft patina with razor sharp edges. Standard sporting sights. Frame colors have darkened. Walnut stocks are excellent, proud to metal, with rifle buttplate. Sharp rifling and fine action. The left side of the stock is adorned with a 1 - 3/4" x 4" engraved silver plaque that reads "PAWNEE BILL'S HISTORIC WILD WEST TO MISS MAY LILLIE MY STRAIGHT SHOOTER FROM G.W.L." (Gordon William Lillie 1860-1942). World renowned as "Pawnee Bill", he was recruited by Buffalo Bill Cody's Wild West Show in 1883. He met May Manning, a 15 year old Quaker girl in 1883 while in Philadelphia and they married on August 1st, 1886. May's urged him to create his own Wild West show and in 1888 he began touring the country as Pawnee Bill's Wild West, but they continued to appear as special guests on Buffalo Bill's show. He led a group of 4,000 in the Oklahoma Land Run on April 22nd, 1889. That same year his Wild West traveled the United States and Europe starring May Lillie as the champion horseback shot of the West. His show re-joined Bill Cody in 1908. May and Gordon settled in Pawnee, Oklahoma where they built a cabin in 1910. May managed the Lillie Buffalo Ranch, she also starred in the film "May Lillie: Queen of the Buffalo Ranch". May died on September 17th, 1936 as a result of injuries sustained while the couple was driving home from their 50th wedding anniversary on Taos, New Mexico. She was inducted into the cowboy Hall of Fame in 2011. This rifle comes with numerous supporting items; photographs and history, includes an original 1880's cabinet card of the couple, factory letter, letter of provenance dated June 16th, 1946 from Dr. Christian Meyers who attended to May from September 13th until she died and also took care of Gordon. This rifle was presented to Dr. Meyers by Gordon for his gratitude in his care of the couple. Dr. Meyers was mortally wounded at the Battle of Bestogne and his rifle inherited by his son, Christian Meyers, who wrote this letter. In addition to this album or provenance is a brass tacked leather jewelry box with "MAY LILLIE" brass plaque. Inside is a 1896 Buffalo Bill Wild West Show flag with "MAY LILLIE" stenciled on front, a Pawnee Bill hand signed Wild West pocket card, a brass keyplate stamped "MAY LILLIE BBWWS" with back stamped "MAY L." with a key for the box, and a pair of beautiful beadwork woman's leather Western gloves. A lovely ensemble from a famous woman of the West.Accessories: Box, Banner, Gloves, Key & CardBarrel Length: 24"Caliber/Bore: .32 RimfireFFL Status: AntiqueManufacturer: WinchesterModel: 1885Paperwork: YesSerial Number: 18657
Manufactured 1887. Shipped March 6th, 1888 with full octagon barrel, walnut stocks, plain trigger, sporting sights. Barrel is apleasing mix of blue and soft patina with...more razor sharp edges. Standard sporting sights. Frame colors have darkened. Walnut stocks are excellent, proud to metal, with rifle buttplate. Sharp rifling and fine action. The left side of the stock is adorned with a 1 - 3/4" x 4" engraved silver plaque that reads "PAWNEE BILL'S HISTORIC WILD WEST TO MISS MAY LILLIE MY STRAIGHT SHOOTER FROM G.W.L." (Gordon William Lillie 1860-1942). World renowned as "Pawnee Bill", he was recruited by Buffalo Bill Cody's Wild West Show in 1883. He met May Manning, a 15 year old Quaker girl in 1883 while in Philadelphia and they married on August 1st, 1886. May's urged him to create his own Wild West show and in 1888 he began touring the country as Pawnee Bill's Wild West, but they continued to appear as special guests on Buffalo Bill's show. He led a group of 4,000 in the Oklahoma Land Run on April 22nd, 1889. That same year his Wild West traveled the United States and Europe starring May Lillie as the champion horseback shot of the West. His show re-joined Bill Cody in 1908. May and Gordon settled in Pawnee, Oklahoma where they built a cabin in 1910. May managed the Lillie Buffalo Ranch, she also starred in the film "May Lillie: Queen of the Buffalo Ranch". May died on September 17th, 1936 as a result of injuries sustained while the couple was driving home from their 50th wedding anniversary on Taos, New Mexico. She was inducted into the cowboy Hall of Fame in 2011. This rifle comes with numerous supporting items; photographs and history, includes an original 1880's cabinet card of the couple, factory letter, letter of provenance dated June 16th, 1946 from Dr. Christian Meyers who attended to May from September 13th until she died and also took care of Gordon. This rifle was presented to Dr. Meyers by Gordon for his gratitude in his care of the couple. Dr. Meyers was mortally wounded at the Battle of Bestogne and his rifle inherited by his son, Christian Meyers, who wrote this letter. In addition to this album or provenance is a brass tacked leather jewelry box with "MAY LILLIE" brass plaque. Inside is a 1896 Buffalo Bill Wild West Show flag with "MAY LILLIE" stenciled on front, a Pawnee Bill hand signed Wild West pocket card, a brass keyplate stamped "MAY LILLIE BBWWS" with back stamped "MAY L." with a key for the box, and a pair of beautiful beadwork woman's leather Western gloves. A lovely ensemble from a famous woman of the West.Accessories: Box, Banner, Gloves, Key & CardBarrel Length: 24"Caliber/Bore: .32 RimfireFFL Status: AntiqueManufacturer: WinchesterModel: 1885Paperwork: YesSerial Number: 18657

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 16,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Exceedingly Rare & Desirable Flatside Winchester 1866 Saddle Ring Carbine - 1st Model (1868).

Lot # 188 (Sale Order: 186 of 545)      

These exceedingly rare Flatside carbines were made starting in the 12000 and ending in the 15500 range. These were manufactured at the same time and using the same serial numbers as its predecessor, the 1860 Henry rifle. Production of the Saddle Ring Carbine is estimated to be 50% as the rifle encompassed the balance of the production. This rare variation has a number of distinct differences from its later production brethren. This rifle, serial numbered on its inner tang and matching numbers crescent buttplate has the distinct flatside receiver as well as its appropriate two line Henry's Patent barrel address. Still retaining its proper two position 500 yard rear sight and one piece front sight barrel band. These early guns are rarely found in prime condition and this example is certainly the exception. The two piece walnut stocks are exceptionally fine and the buttstock has the prized "Henry Bump" on its left side. As these rifles were typically hard-used, finding one with a Henry Bump or its original finish is a great rarity. The blue finish on the barrel and magazine is exceptionally fine with over 80% remaining and balance turning a somewhat plum. Brass receiver shows no evidence of having been cleaned and remains a pleasant mustard yellow. The early carbine crescent butt matches with the same hue of color. The bore and mechanics work smoothly and properly and show little indication of actual use. The bore is exceptionally fine, showing several small areas of darkness but with strong rifling and is mostly bright. This carbine is complete with its proper three piece brass tipped cleaning rod that is housed in the butt. Another distinct features of these carbines is the very First Model flat gate loading latch, unlike any others of later manufacture, these are not scalloped for a cartridge guide and have a small spring underneath inletted into the receiver. These are rarely found intact and/or function, again this example is the exception. Several screw slots are slightly fouled from the evident used of an improper or ill-fitting screwdriver, but these are quite well aged and do not appear to have happened in recent past. This is certainly one of the finest examples ever viewed and with an approximate quantity of 800 to 900 of these available to collectors today (according to author George Madis). This would be considered one of the rarest and most desirable of Winchester collectables.Barrel Length: 20"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 14789
These exceedingly rare Flatside carbines were made starting in the 12000 and ending in the 15500 range. These were manufactured at the same time and using the same seria...morel numbers as its predecessor, the 1860 Henry rifle. Production of the Saddle Ring Carbine is estimated to be 50% as the rifle encompassed the balance of the production. This rare variation has a number of distinct differences from its later production brethren. This rifle, serial numbered on its inner tang and matching numbers crescent buttplate has the distinct flatside receiver as well as its appropriate two line Henry's Patent barrel address. Still retaining its proper two position 500 yard rear sight and one piece front sight barrel band. These early guns are rarely found in prime condition and this example is certainly the exception. The two piece walnut stocks are exceptionally fine and the buttstock has the prized "Henry Bump" on its left side. As these rifles were typically hard-used, finding one with a Henry Bump or its original finish is a great rarity. The blue finish on the barrel and magazine is exceptionally fine with over 80% remaining and balance turning a somewhat plum. Brass receiver shows no evidence of having been cleaned and remains a pleasant mustard yellow. The early carbine crescent butt matches with the same hue of color. The bore and mechanics work smoothly and properly and show little indication of actual use. The bore is exceptionally fine, showing several small areas of darkness but with strong rifling and is mostly bright. This carbine is complete with its proper three piece brass tipped cleaning rod that is housed in the butt. Another distinct features of these carbines is the very First Model flat gate loading latch, unlike any others of later manufacture, these are not scalloped for a cartridge guide and have a small spring underneath inletted into the receiver. These are rarely found intact and/or function, again this example is the exception. Several screw slots are slightly fouled from the evident used of an improper or ill-fitting screwdriver, but these are quite well aged and do not appear to have happened in recent past. This is certainly one of the finest examples ever viewed and with an approximate quantity of 800 to 900 of these available to collectors today (according to author George Madis). This would be considered one of the rarest and most desirable of Winchester collectables.Barrel Length: 20"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 14789

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 19,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Exceptionally Fine 3rd Model Model 1860 Henry Rifle (1865).

Lot # 189 (Sale Order: 187 of 545)      

Third Model New Haven Arms Model 1860 Henry brass frame with sling swivel on barrel and stock. Traditional 900 yard marked Henry sight with matching numbers observed on barrel, interior of lower tang and buttstock mortis. These later New Haven rifles did not have the serial numbered screws that are found in the earlier First and Second Models. An incredibly pronounced "Henry Bump" is evident on left side of stock below sling swivel. The rifle retains a wonderful, mellow mustard patina on all brass with no evidence of cleaning. Sideplates fit solidly with no distress. Barrel retains approximately 40% rich blue finish with balance attaining a pleasant plum color. Rifle remains chambered for .44 rimfire, having not been converted to centerfire as so many examples are found. Traces of case color finish remain on hammer while trigger and lever have somewhat silvered. Stock finish is very good overall with typical slight wear at comb and wrist. Appropriate four piece steel cleaning rod remains in butt. Bolt bore, while being dark, has very strong and pronounced rifling. Mechanics are proper and in working order. This is an exceptionally fine Third Model Henry with no evidence of having been modified or helped in any manner. Fine untouched examples like this are infrequently found and would certainly be the centerpiece of any Winchester enthusiast's collection.Accessories: Cleaning rodBarrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: New Haven Arms Co.Model: 1860 HenryPaperwork: No Serial Number: 9538
Third Model New Haven Arms Model 1860 Henry brass frame with sling swivel on barrel and stock. Traditional 900 yard marked Henry sight with matching numbers observed on ...morebarrel, interior of lower tang and buttstock mortis. These later New Haven rifles did not have the serial numbered screws that are found in the earlier First and Second Models. An incredibly pronounced "Henry Bump" is evident on left side of stock below sling swivel. The rifle retains a wonderful, mellow mustard patina on all brass with no evidence of cleaning. Sideplates fit solidly with no distress. Barrel retains approximately 40% rich blue finish with balance attaining a pleasant plum color. Rifle remains chambered for .44 rimfire, having not been converted to centerfire as so many examples are found. Traces of case color finish remain on hammer while trigger and lever have somewhat silvered. Stock finish is very good overall with typical slight wear at comb and wrist. Appropriate four piece steel cleaning rod remains in butt. Bolt bore, while being dark, has very strong and pronounced rifling. Mechanics are proper and in working order. This is an exceptionally fine Third Model Henry with no evidence of having been modified or helped in any manner. Fine untouched examples like this are infrequently found and would certainly be the centerpiece of any Winchester enthusiast's collection.Accessories: Cleaning rodBarrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: New Haven Arms Co.Model: 1860 HenryPaperwork: No Serial Number: 9538

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Rare Winchester Model 1886 Musket With Bayonet (1893).

Lot # 190 (Sale Order: 188 of 545)      

Rare ’86 musket with round barrel, full length forearm which conceals the magazine tube, that has a metal nose cap and sgl band with sling swivel. It has square base front sight/bayonet lug and a musket style ladder rear sight graduated to 1,000 yards. Mounted with uncheckered straight grain American walnut with straight stock and musket/carbine buttplate with trap. Bottom of stock has a sling swivel. According to Flayderman’s Guide to Antique American Firearms only about 350 of these muskets were produced and “The ’86 musket is the greatest rarity of all Winchester lever action muskets.” Excellent condition. Barrel retains over 97% of its factory applied finish overall. Receiver retains about 98% of its vivid case colors, a bit softer and duller on hammer and lever. Stocks excellent and near perfect, well fit with typical scattered small dings, dents and scratches typical of 100 years of storage. Accompanying bayonet is silver-grey overall with scattered areas of staining and pitting matching overall condition of musket quite well and fits and locks quite tightly on barrel. Mechanically gun is sound and retains crisp rifling and shiny bore. A stunning example of one of the rarest of all military pattern Winchesters ever made. Factory letter states that serial No. 82404 was shipped on September 15th, 1893 as a Model 1886 .45-70 musket. From the Jim Linton Collection.Accessories: BayonetBarrel Length: 30"Caliber/Bore: .45-70FFL Status: AntiqueManufacturer: WinchesterModel: 1886Paperwork: YesSerial Number: 82404
Rare ’86 musket with round barrel, full length forearm which conceals the magazine tube, that has a metal nose cap and sgl band with sling swivel. It has square base fron...moret sight/bayonet lug and a musket style ladder rear sight graduated to 1,000 yards. Mounted with uncheckered straight grain American walnut with straight stock and musket/carbine buttplate with trap. Bottom of stock has a sling swivel. According to Flayderman’s Guide to Antique American Firearms only about 350 of these muskets were produced and “The ’86 musket is the greatest rarity of all Winchester lever action muskets.” Excellent condition. Barrel retains over 97% of its factory applied finish overall. Receiver retains about 98% of its vivid case colors, a bit softer and duller on hammer and lever. Stocks excellent and near perfect, well fit with typical scattered small dings, dents and scratches typical of 100 years of storage. Accompanying bayonet is silver-grey overall with scattered areas of staining and pitting matching overall condition of musket quite well and fits and locks quite tightly on barrel. Mechanically gun is sound and retains crisp rifling and shiny bore. A stunning example of one of the rarest of all military pattern Winchesters ever made. Factory letter states that serial No. 82404 was shipped on September 15th, 1893 as a Model 1886 .45-70 musket. From the Jim Linton Collection.Accessories: BayonetBarrel Length: 30"Caliber/Bore: .45-70FFL Status: AntiqueManufacturer: WinchesterModel: 1886Paperwork: YesSerial Number: 82404

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 19,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Experimental Springfield Model 1873 Trapdoor Carbine with Dual Extractor System.

Lot # 191 (Sale Order: 189 of 545)      

Round barrel, blue finish and walnut stock. This is a unique example of a US Springfield Model 1873 Trapdoor "Trials Model" marked carbine. This dual extractor design was most likely developed due to all the extractor problems that the Calvary was having with this Trapdoor design. The basic problem was actually not with the design it was with the .45-70 ammunition and lack of adequate cleaning or maintenance. The first type of .45-70 cartridges had a tendency to stick in the chambers after they were fired and when the breech block was forced completely open it broke the single extractor. To correct this problem a dual extractor system was developed. They produced only a handful of this design with even fewer weapons actually issued to the field for testing. The carbine is actually stamped on top of the barrel in front of the rear sight: "TRIALS MODEL" and on the right side with: "U.S. BENECIA ARSENAL", and on the left side: "DUAL EXTRACTOR SYSTEM". The top of the receiver over the chamber area is stamped: "45 CAL/70 GRAINS M.P./405/GRAINS B.W./1000 ROUNDS". Clearly indicating that this carbine was actually sent to Benecia Arsenal and fired 1000 round of the noted .45-70 ammunition. Other than those modifications, the carbine is a standard production model. The serial number falls into the noted range for a Model 1877 carbine. It is fitted with a high arch breech block marked "SPRINGFIELD/1873/Eagle I lead proof/Crossed Rifles/U.S.". It is fitted with a three click tumbler on the lock and the lock plate is stamped "U.S. SPRINGFIELD/1873". It is also fitted with the twopiece trigger plate/trigger guard with a smooth face trigger. It has its original long-comb, short wrist carbine stock that has the original carbine sling bar and ring on the left side followed by a single unidentified, possibly added, "JM" oval cartouche. It is fitted with a standard integral blade front 'light and the rear sight is similar to the Model 1868-70 trapdoor. Why that sight we don't know but it has been on the carbine since it was built and it has the same original matching finish. Interestingly this rare example has the new style buttplate with the trapdoor and the stock cutouts for the new three-piece cleaning rod and ruptured shell extractor (all not included with the carbine). This was another improvement that was developed after the Custer fiasco. Very good as modified for improved cartridge extraction with traces of the original blued finish remaining mostly in the protected area of the barrel with the overall exposed metal areas showing a light blown patina type finish.The case colors on the breech block have silvered out. The stock is in good condition overall with a nice medium brown color, showing light wear mixed with minor handling marks. The right side of the stock, just above and below the lock plate, shows an old age crack or wood separation that angles down to the edge of the trigger plate. Regardless, this is a unique, previously unknown, experimental "Trials Model" test carbine. Barrel Length: 22"Caliber/Bore: .45-70FFL Status: AntiqueManufacturer: SpringfieldModel: 1873 TrapdoorPaperwork: YesSerial Number: 50302 CORRECTION: It has been discovered that the JM cartouche is the of Julian McAllister who was commander at Benecia Arsenal from 1874 through 1888.
Round barrel, blue finish and walnut stock. This is a unique example of a US Springfield Model 1873 Trapdoor "Trials Model" marked carbine. This dual extractor design was...more most likely developed due to all the extractor problems that the Calvary was having with this Trapdoor design. The basic problem was actually not with the design it was with the .45-70 ammunition and lack of adequate cleaning or maintenance. The first type of .45-70 cartridges had a tendency to stick in the chambers after they were fired and when the breech block was forced completely open it broke the single extractor. To correct this problem a dual extractor system was developed. They produced only a handful of this design with even fewer weapons actually issued to the field for testing. The carbine is actually stamped on top of the barrel in front of the rear sight: "TRIALS MODEL" and on the right side with: "U.S. BENECIA ARSENAL", and on the left side: "DUAL EXTRACTOR SYSTEM". The top of the receiver over the chamber area is stamped: "45 CAL/70 GRAINS M.P./405/GRAINS B.W./1000 ROUNDS". Clearly indicating that this carbine was actually sent to Benecia Arsenal and fired 1000 round of the noted .45-70 ammunition. Other than those modifications, the carbine is a standard production model. The serial number falls into the noted range for a Model 1877 carbine. It is fitted with a high arch breech block marked "SPRINGFIELD/1873/Eagle I lead proof/Crossed Rifles/U.S.". It is fitted with a three click tumbler on the lock and the lock plate is stamped "U.S. SPRINGFIELD/1873". It is also fitted with the twopiece trigger plate/trigger guard with a smooth face trigger. It has its original long-comb, short wrist carbine stock that has the original carbine sling bar and ring on the left side followed by a single unidentified, possibly added, "JM" oval cartouche. It is fitted with a standard integral blade front 'light and the rear sight is similar to the Model 1868-70 trapdoor. Why that sight we don't know but it has been on the carbine since it was built and it has the same original matching finish. Interestingly this rare example has the new style buttplate with the trapdoor and the stock cutouts for the new three-piece cleaning rod and ruptured shell extractor (all not included with the carbine). This was another improvement that was developed after the Custer fiasco. Very good as modified for improved cartridge extraction with traces of the original blued finish remaining mostly in the protected area of the barrel with the overall exposed metal areas showing a light blown patina type finish.The case colors on the breech block have silvered out. The stock is in good condition overall with a nice medium brown color, showing light wear mixed with minor handling marks. The right side of the stock, just above and below the lock plate, shows an old age crack or wood separation that angles down to the edge of the trigger plate. Regardless, this is a unique, previously unknown, experimental "Trials Model" test carbine. Barrel Length: 22"Caliber/Bore: .45-70FFL Status: AntiqueManufacturer: SpringfieldModel: 1873 TrapdoorPaperwork: YesSerial Number: 50302 CORRECTION: It has been discovered that the JM cartouche is the of Julian McAllister who was commander at Benecia Arsenal from 1874 through 1888.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Outstanding Winchester Model 1876 3rd Model Lever Action Rifle (1884).

Lot # 192 (Sale Order: 190 of 545)      

Special order rifle features half octagon-half round barrel, button half magazine, blue and case color finishes, and two piece walnut stocks with crescent buttplate. This rifle is documented with a letter from the Buffalo Bill Historical Center confirming the configuration and showing a shipping date of September 9th, 1885. This Third Model 1876 has integral dust cover rail. The Centennial Model Winchester was the companies first successful endeavor into the big bore and more powerful rifle industry. It was a major success with notable hunters, lawmen and explorers such as Theodore Roosevelt, Tom Horn and even the Northwest Mounted Police in Canada. This example is in outstanding condition with most all blue finish remaining and the case colored receiver retains over 80% vivid colors with balance faded to a silver. The stocks are equally fine with most all the varnish intact and having only slight wear and bruising. The bore and mechanics are very good and functioning well. This is truly a far better than average Third Model 1876 and would be difficult to find a better example.Barrel Length: 26"Caliber/Bore: .45-60 WCFFFL Status: AntiqueManufacturer: WinchesterModel: 1876Paperwork: YesSerial Number: 47304
Special order rifle features half octagon-half round barrel, button half magazine, blue and case color finishes, and two piece walnut stocks with crescent buttplate. This...more rifle is documented with a letter from the Buffalo Bill Historical Center confirming the configuration and showing a shipping date of September 9th, 1885. This Third Model 1876 has integral dust cover rail. The Centennial Model Winchester was the companies first successful endeavor into the big bore and more powerful rifle industry. It was a major success with notable hunters, lawmen and explorers such as Theodore Roosevelt, Tom Horn and even the Northwest Mounted Police in Canada. This example is in outstanding condition with most all blue finish remaining and the case colored receiver retains over 80% vivid colors with balance faded to a silver. The stocks are equally fine with most all the varnish intact and having only slight wear and bruising. The bore and mechanics are very good and functioning well. This is truly a far better than average Third Model 1876 and would be difficult to find a better example.Barrel Length: 26"Caliber/Bore: .45-60 WCFFFL Status: AntiqueManufacturer: WinchesterModel: 1876Paperwork: YesSerial Number: 47304

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 14,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Fine Early 1866 Winchester Lever Action Rifle with Early Henry Marked Barrel & Henry 900 Staff R

Lot # 193 (Sale Order: 191 of 545)      

Manufactured 1868, immediately after the Flatside variation had just ceased. This early variation however still retains its two line Henry barrel address and Henry 900 yard staff sight. Manufactured with factory sling swivels and crescent buttplate. Two piece walnut stocks have a contemporary finish applied. Barrel and magazine retain a tremendous amount of factory blue finish with several small areas of corrosion evident and balance of finish having turned plum or worn thin. An expertly crafted wood repair has been done at toe and is virtually indistinguishable until dismounted from rifle. Buttstock is serial numbered to rifle inside of mortis. The gun metal brass receiver and buttplate are in a remarkable state of preservation and have attained a pleasant mustard brown patina with no evidence of ever having been cleaned or sideplates having been removed. Much case color is evident on hammer with traces of case color evident on lever in very protect areas. Loading gate retains most of its fiery Nitre blue finish. Bore and mechanics are both exceptional. A very good example of a very rare and early Winchester 1866 rifle.Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: Winchester HenryModel: 1866Paperwork: No Serial Number: 15979
Manufactured 1868, immediately after the Flatside variation had just ceased. This early variation however still retains its two line Henry barrel address and Henry 900 y...moreard staff sight. Manufactured with factory sling swivels and crescent buttplate. Two piece walnut stocks have a contemporary finish applied. Barrel and magazine retain a tremendous amount of factory blue finish with several small areas of corrosion evident and balance of finish having turned plum or worn thin. An expertly crafted wood repair has been done at toe and is virtually indistinguishable until dismounted from rifle. Buttstock is serial numbered to rifle inside of mortis. The gun metal brass receiver and buttplate are in a remarkable state of preservation and have attained a pleasant mustard brown patina with no evidence of ever having been cleaned or sideplates having been removed. Much case color is evident on hammer with traces of case color evident on lever in very protect areas. Loading gate retains most of its fiery Nitre blue finish. Bore and mechanics are both exceptional. A very good example of a very rare and early Winchester 1866 rifle.Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: Winchester HenryModel: 1866Paperwork: No Serial Number: 15979

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 14,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) 1863 Manufactured New Haven Arms Model 1860 Henry Rifle (1863).

Lot # 194 (Sale Order: 192 of 545)      

Octagon barrel with New haven Arms barrel address on top flat. Serial number 2601 is present on top flat forward of receiver. Gun metal brass receiver with sight slot on top. American walnut straight grained stock with brass buttplate and sling swivel mounted on left side. Many of these rifles saw extensive service during the period of unrest of the United States Civil War. The iconic Henry rifle was issues extensively to Union troops and state Militias. Later they saw extensive use during our period of western expansion and have even been excavated at Civil War and Indian War battle sites. This example shows signs of hard use and some indications of contemporary restoration. The barrel has turned a mellow chocolate patina with replaced front sight. Rear sight is not present. The gun metal brass receiver has been cleaned and is somewhat bright. The American walnut stock has been sanded and is now somewhat undersized. The lower tang screw is a replacement. The bolt is a contemporary reproduction and has been pleasantly aged to give the appearance of being authentic. This Model 1860 is a very aesthetically pleasing example.Accessories: Original Cleaning Rod SetBarrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: Lever ActionPaperwork: No Serial Number: 2601
Octagon barrel with New haven Arms barrel address on top flat. Serial number 2601 is present on top flat forward of receiver. Gun metal brass receiver with sight slot on ...moretop. American walnut straight grained stock with brass buttplate and sling swivel mounted on left side. Many of these rifles saw extensive service during the period of unrest of the United States Civil War. The iconic Henry rifle was issues extensively to Union troops and state Militias. Later they saw extensive use during our period of western expansion and have even been excavated at Civil War and Indian War battle sites. This example shows signs of hard use and some indications of contemporary restoration. The barrel has turned a mellow chocolate patina with replaced front sight. Rear sight is not present. The gun metal brass receiver has been cleaned and is somewhat bright. The American walnut stock has been sanded and is now somewhat undersized. The lower tang screw is a replacement. The bolt is a contemporary reproduction and has been pleasantly aged to give the appearance of being authentic. This Model 1860 is a very aesthetically pleasing example.Accessories: Original Cleaning Rod SetBarrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: Lever ActionPaperwork: No Serial Number: 2601

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 13,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Rare High Condition Factory Half Plate Nickel Winchester Model 1873 Lever Action Rifle (1877).

Lot # 195 (Sale Order: 193 of 545)      

Seldom ordered but considered one of the most handsome special order features are the so-called factory nickel half plate, referring to the factory nickel plating of the frame, dustcover, trigger, lever forend cap, magazine etaining band and rifle buttplate. Other standard features include full octagon barrel, full magazine, sporting sights and walnut stocks. The barrel and tube of this rifle retain approximately 85% of the original factory blue finish. From band to muzzle is a mix of blue-brown patina but basically patina on front. Barrel has razor sharp edges, sharp legends. Nickeled areas of the gun retain 98% of their original clouded plating. Features a sharp second style oval thumbprint dust cover. Buttplate retains approximately 40% plating. Near mint bore and action.Barrel Length: 24"Caliber/Bore: .44-40FFL Status: AntiqueManufacturer: WinchesterModel: 1876Paperwork: No Serial Number: 18255 CORRECTION: Factory research confirms the above listed features. Serial No. 18255 shipped September 16th, 1876.
Seldom ordered but considered one of the most handsome special order features are the so-called factory nickel half plate, referring to the factory nickel plating of the ...moreframe, dustcover, trigger, lever forend cap, magazine etaining band and rifle buttplate. Other standard features include full octagon barrel, full magazine, sporting sights and walnut stocks. The barrel and tube of this rifle retain approximately 85% of the original factory blue finish. From band to muzzle is a mix of blue-brown patina but basically patina on front. Barrel has razor sharp edges, sharp legends. Nickeled areas of the gun retain 98% of their original clouded plating. Features a sharp second style oval thumbprint dust cover. Buttplate retains approximately 40% plating. Near mint bore and action.Barrel Length: 24"Caliber/Bore: .44-40FFL Status: AntiqueManufacturer: WinchesterModel: 1876Paperwork: No Serial Number: 18255 CORRECTION: Factory research confirms the above listed features. Serial No. 18255 shipped September 16th, 1876.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 13,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Fine Deluxe Winchester Model 1873 Lever Action Rifle (1882).

Lot # 196 (Sale Order: 194 of 545)      

This deluxe checkered, pistol gripped, case colored receiver, deluxe rifle is very fine condition overall. With a half round-half octagon barrel this Second Model 1873 has a piano varnish finished stock with highly figured center cut crotch walnut. The assembly number on interior of lower tang matches the stock and buttplate. Features traditional two line Winchester barrel address, sporting blade front sight and semi-buckhorn elevator adjustable rear sight. The barrel and magazine retain over 80% of their respected faded blue finishes. The receiver retains approximately 30% faded case colors with balance having turned silver. The deluxe stocks retain most all of their varnished finishes with typical wear loss at forearm bottom and wrist from handling. A small chip of wood is missing on the forearm front left side and appears to be a very old and period chip. The bore is very fine with sharp rifling with very slight darkness in the grooves. The mechanics operate properly and smoothly. Special order barrel configurations are a great rarity in the Winchester collecting field. This rifle being a full deluxe with special order triple X wood (as indicated upon the tang), half octagon-half round barrel and checkered pistol grip stocks ad up to make this a superb opportunity.Barrel Length: 24"Caliber/Bore: .44-40FFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: No Serial Number: 97071A
This deluxe checkered, pistol gripped, case colored receiver, deluxe rifle is very fine condition overall. With a half round-half octagon barrel this Second Model 1873 ha...mores a piano varnish finished stock with highly figured center cut crotch walnut. The assembly number on interior of lower tang matches the stock and buttplate. Features traditional two line Winchester barrel address, sporting blade front sight and semi-buckhorn elevator adjustable rear sight. The barrel and magazine retain over 80% of their respected faded blue finishes. The receiver retains approximately 30% faded case colors with balance having turned silver. The deluxe stocks retain most all of their varnished finishes with typical wear loss at forearm bottom and wrist from handling. A small chip of wood is missing on the forearm front left side and appears to be a very old and period chip. The bore is very fine with sharp rifling with very slight darkness in the grooves. The mechanics operate properly and smoothly. Special order barrel configurations are a great rarity in the Winchester collecting field. This rifle being a full deluxe with special order triple X wood (as indicated upon the tang), half octagon-half round barrel and checkered pistol grip stocks ad up to make this a superb opportunity.Barrel Length: 24"Caliber/Bore: .44-40FFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: No Serial Number: 97071A

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Engraved 2nd Model Henry Rifle (1864).

Lot # 197 (Sale Order: 195 of 545)      

Model 1860 New Haven Arms Henry rifle second variation with walnut stock and sling swivels. This 1864 production rifle retains its full length barrel and has had its rear sight with a period buckhorn fixed rear sight. Engraved in broad scroll and vine floral arabesque with punch dot background on both sides with a same pattern of scrolls on top of receiver fore and aft ejection port. A silver washed finish is present on the gun metal brass receiver and buttplate with an amount remaining equivalent to approximately 30%. Barrel assembly has a frosted greyish patina. Several small parts such as the front sight and several small screws appear to be contemporary replacements. After detailed disassembly and evaluation no screws were found to be numbered on this rifle. Buttplate is numbered to match. The engraving, while not being factory, is very skillfully executed and possibly the work of Mr. Bob Elz of Elz Fargo Guns, a very historic West Coast firearms dealer. A great opportunity to own a fine embellished 1860 Henry rifle.Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: Henry RiflePaperwork: No Serial Number: 5798
Model 1860 New Haven Arms Henry rifle second variation with walnut stock and sling swivels. This 1864 production rifle retains its full length barrel and has had its rea...morer sight with a period buckhorn fixed rear sight. Engraved in broad scroll and vine floral arabesque with punch dot background on both sides with a same pattern of scrolls on top of receiver fore and aft ejection port. A silver washed finish is present on the gun metal brass receiver and buttplate with an amount remaining equivalent to approximately 30%. Barrel assembly has a frosted greyish patina. Several small parts such as the front sight and several small screws appear to be contemporary replacements. After detailed disassembly and evaluation no screws were found to be numbered on this rifle. Buttplate is numbered to match. The engraving, while not being factory, is very skillfully executed and possibly the work of Mr. Bob Elz of Elz Fargo Guns, a very historic West Coast firearms dealer. A great opportunity to own a fine embellished 1860 Henry rifle.Barrel Length: 24"Caliber/Bore: .44 RFFFL Status: AntiqueManufacturer: HenryModel: Henry RiflePaperwork: No Serial Number: 5798

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 13,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Spectacular Near New Winchester Model 1873 Lever Action Saddle Ring Carbine (1889).

Lot # 198 (Sale Order: 196 of 545)      

Round carbine pattern barrel with carbine fixed front sight. Ladder adjustable carbine rear sight. Traditional Winchester address on barrel. Blue finish receiver with vividly case colored hammer, lever and buttplate. Two piece straight grained American walnut stocks with factory applied oil finish. Third Model variant with integral dust cover rail. Brass cartridge elevator marked "44 Cal" on bottom. This is one of the newest untouched Model 1873 saddle ring carbines we have ever observed. The factory applied blue finish has over 98% remaining with wear only at the high points of the barrel bands and slight fading of finish on the dust cover. A tiny amount of edge wear is evident at the balance point of the receiver. This is a prime example and has obviously been a treasured keep sake as no handling or use is evident. Bore is pristine and action functions perfectly. From the Jim Linton Collection.Barrel Length: 20"Caliber/Bore: .44FFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: No Serial Number: 293121B CORRECTION: Factory research confirms that serial No. 293121 was shipped April 18th, 1889 as a .44 caliber carbine.
Round carbine pattern barrel with carbine fixed front sight. Ladder adjustable carbine rear sight. Traditional Winchester address on barrel. Blue finish receiver with viv...moreidly case colored hammer, lever and buttplate. Two piece straight grained American walnut stocks with factory applied oil finish. Third Model variant with integral dust cover rail. Brass cartridge elevator marked "44 Cal" on bottom. This is one of the newest untouched Model 1873 saddle ring carbines we have ever observed. The factory applied blue finish has over 98% remaining with wear only at the high points of the barrel bands and slight fading of finish on the dust cover. A tiny amount of edge wear is evident at the balance point of the receiver. This is a prime example and has obviously been a treasured keep sake as no handling or use is evident. Bore is pristine and action functions perfectly. From the Jim Linton Collection.Barrel Length: 20"Caliber/Bore: .44FFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: No Serial Number: 293121B CORRECTION: Factory research confirms that serial No. 293121 was shipped April 18th, 1889 as a .44 caliber carbine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Stunning Winchester Model 1873 Lever Action Rifle (1883).

Lot # 199 (Sale Order: 197 of 545)      

Round barrel, blue and casehardened finish, and walnut stock. Third variation with dust cover rail made as an integral portion of the receiver. The extra weight round barrel has a full magazine, half nickel front sight and "1876" marked ladder rear sight. It has a straight grain uncheckered American walnut wood with straight stock and crescent buttplate with trap containing a four piece iron and brass wiping rod. Other features are standard with “MODEL 1873” marked on the upper tang and the two line address with “KINGS IMPROVEMENT” starting the second line. Only the lever, hammer and buttplate are casehardened, all other parts are blue. The round barrel was less common for early Model 1873 rifles and is very difficult to find one in good condition, left alone as good as this one is. A four piece cleaning rod with brass head is in the compartment under the trapdoor in the buttplate. Excellent plus with 98-99% (as new) bright original blue on the action, barrel, magazine tube, and forearm cap. Brilliant casehardening colors on the hammer, bright on the lever and butt. The wood is also excellent plus retaining most all of its brilliant factory piano varnish finish. The action is excellent with brilliant shiny bore most likely unfired. A absolutely stunning example that would be virtually impossible to improve upon. From the Jim Linton Collection.Barrel Length: 24"Caliber/Bore: .44 CalFFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: No Serial Number: 173340A CORRECTION: Factory research confirms the above listed features. Shipped June 3rd, 1885.
Round barrel, blue and casehardened finish, and walnut stock. Third variation with dust cover rail made as an integral portion of the receiver. The extra weight round bar...morerel has a full magazine, half nickel front sight and "1876" marked ladder rear sight. It has a straight grain uncheckered American walnut wood with straight stock and crescent buttplate with trap containing a four piece iron and brass wiping rod. Other features are standard with “MODEL 1873” marked on the upper tang and the two line address with “KINGS IMPROVEMENT” starting the second line. Only the lever, hammer and buttplate are casehardened, all other parts are blue. The round barrel was less common for early Model 1873 rifles and is very difficult to find one in good condition, left alone as good as this one is. A four piece cleaning rod with brass head is in the compartment under the trapdoor in the buttplate. Excellent plus with 98-99% (as new) bright original blue on the action, barrel, magazine tube, and forearm cap. Brilliant casehardening colors on the hammer, bright on the lever and butt. The wood is also excellent plus retaining most all of its brilliant factory piano varnish finish. The action is excellent with brilliant shiny bore most likely unfired. A absolutely stunning example that would be virtually impossible to improve upon. From the Jim Linton Collection.Barrel Length: 24"Caliber/Bore: .44 CalFFL Status: AntiqueManufacturer: WinchesterModel: 1873Paperwork: No Serial Number: 173340A CORRECTION: Factory research confirms the above listed features. Shipped June 3rd, 1885.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Superior Condition Winchester Model 1866 Rifle (1874).

Lot # 200 (Sale Order: 198 of 545)      

Octagon barrel chambered for the traditional .444 Henry flat cartridge. Full length magazine with gun metal brass third model receiver. Two piece American walnut stocks with case colored hammer and lever. Brass crescent buttplate with provision for cleaning rod. Factory mounted with sling swivels. Sporting front sight with nickel silver insert. Two line Winchester address on top barrel flat. Third pattern ladder rear sight with external spring inset into barrel. Niter blue finished loading gate. Excellent overall condition with over 80% factory applied factory blue finish remaining although turning plum is superb. Hammer and lever retain most of their mottled case colors with more vivid colors remaining in the more protected areas, brass receiver, forearm cap and buttplate have no indication of having every been disassembled. They have attained a wonderful aged mustard coloring and just give credence to the honesty and the untouched condition of this fine 1866 Winchester. Bore is bright with sharp strong rifling. Mechanics are crisp. This outstanding example has no issues and it would be a very difficult task to find a more honest, correct are finer condition standard rifle. From the Jim Linton Collection.Barrel Length: 24"Caliber/Bore: .44 HenryFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 119037
Octagon barrel chambered for the traditional .444 Henry flat cartridge. Full length magazine with gun metal brass third model receiver. Two piece American walnut stocks w...moreith case colored hammer and lever. Brass crescent buttplate with provision for cleaning rod. Factory mounted with sling swivels. Sporting front sight with nickel silver insert. Two line Winchester address on top barrel flat. Third pattern ladder rear sight with external spring inset into barrel. Niter blue finished loading gate. Excellent overall condition with over 80% factory applied factory blue finish remaining although turning plum is superb. Hammer and lever retain most of their mottled case colors with more vivid colors remaining in the more protected areas, brass receiver, forearm cap and buttplate have no indication of having every been disassembled. They have attained a wonderful aged mustard coloring and just give credence to the honesty and the untouched condition of this fine 1866 Winchester. Bore is bright with sharp strong rifling. Mechanics are crisp. This outstanding example has no issues and it would be a very difficult task to find a more honest, correct are finer condition standard rifle. From the Jim Linton Collection.Barrel Length: 24"Caliber/Bore: .44 HenryFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 119037

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Superb Winchester Model 1866 Saddle Ring Carbine (1870).

Lot # 201 (Sale Order: 199 of 545)      

Manufactured in 1870. Carbine barrel with traditional New Haven address chambered for the .44 Henry flat cartridge. Proper and correct two position folding carbine rear sight. Brass receiver with case colored hammer and lever. Brass crescent buttplate with trap for cleaning rods. Two piece straight grained American walnut stocks. Third model variation receiver with saddle ring. Extremely fine with over 95% factory blue finish remaining. Slight thinning of blue with a transition to plumb under intense light. Very slight loss of blue at muzzle and high points of front sight assembly. Forearm barrel band is void of blue finish and is turning patina. Receiver is a very mellow mustard color and shows no indication of cleaning. Buttplate has the same even color tone. Hammer has over 50% of its cloudy case colors remaining Lever is a even patina with blue in protected areas. Two piece walnut stocks are excellent with several minor impressions in the buttstock. No cracks or material loss is evident. From the Jim Linton Collection.Barrel Length: 20"Caliber/Bore: .44 HenryFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 47995
Manufactured in 1870. Carbine barrel with traditional New Haven address chambered for the .44 Henry flat cartridge. Proper and correct two position folding carbine rear s...moreight. Brass receiver with case colored hammer and lever. Brass crescent buttplate with trap for cleaning rods. Two piece straight grained American walnut stocks. Third model variation receiver with saddle ring. Extremely fine with over 95% factory blue finish remaining. Slight thinning of blue with a transition to plumb under intense light. Very slight loss of blue at muzzle and high points of front sight assembly. Forearm barrel band is void of blue finish and is turning patina. Receiver is a very mellow mustard color and shows no indication of cleaning. Buttplate has the same even color tone. Hammer has over 50% of its cloudy case colors remaining Lever is a even patina with blue in protected areas. Two piece walnut stocks are excellent with several minor impressions in the buttstock. No cracks or material loss is evident. From the Jim Linton Collection.Barrel Length: 20"Caliber/Bore: .44 HenryFFL Status: AntiqueManufacturer: WinchesterModel: 1866Paperwork: No Serial Number: 47995

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 16,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Superb Winchester Model 1876 Lever Action Rifle (1883).

Lot # 202 (Sale Order: 200 of 545)      

This Third Model 1876 features full octagon barrel, sporting front sight, 1876 marked ladder rear sight, full magazine, blue and case colored finishes and two piece walnut stocks with crescent buttplate. Equipped with a special order set trigger and chambered for the .45-60 Winchester cartridge. Very fine condition overall with over 90% blue finish on barrel with edge wear turning patina. Full length magazine retains 40% thinning blue finish with balance thinning to patina. The high polish factory blue receiver retains well over 90% blue finish with typical edge wear and very slight spotting and flecking of finish on sides, tang has turned mostly brown. The outstanding stocks retain most of their factory varnish with a bruise on the left side of wrist and an abrasion about 3/4" in size on the right side of wrist. Traces of case color remain on buttplate in protected areas. The hammer and lever retain well over 80% of their respected case colors with balance turning silver. Overall a very fine 1876.Barrel Length: 28"Caliber/Bore: .45-60 WCFFFL Status: AntiqueManufacturer: WinchesterModel: 1876Paperwork: No Serial Number: 36729 CORRECTION: Factory research confirms all of the listed features. Shipped November 5th, 1884.
This Third Model 1876 features full octagon barrel, sporting front sight, 1876 marked ladder rear sight, full magazine, blue and case colored finishes and two piece walnu...moret stocks with crescent buttplate. Equipped with a special order set trigger and chambered for the .45-60 Winchester cartridge. Very fine condition overall with over 90% blue finish on barrel with edge wear turning patina. Full length magazine retains 40% thinning blue finish with balance thinning to patina. The high polish factory blue receiver retains well over 90% blue finish with typical edge wear and very slight spotting and flecking of finish on sides, tang has turned mostly brown. The outstanding stocks retain most of their factory varnish with a bruise on the left side of wrist and an abrasion about 3/4" in size on the right side of wrist. Traces of case color remain on buttplate in protected areas. The hammer and lever retain well over 80% of their respected case colors with balance turning silver. Overall a very fine 1876.Barrel Length: 28"Caliber/Bore: .45-60 WCFFFL Status: AntiqueManufacturer: WinchesterModel: 1876Paperwork: No Serial Number: 36729 CORRECTION: Factory research confirms all of the listed features. Shipped November 5th, 1884.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 8 of 22

1.178.0.1875.f3727f4.25.247