Firearms, Militaria, & Sporting - Day 1

Firearms, Militaria, & Sporting - Day 1

Tuesday, October 30, 2018  |  9:00 AM Eastern
Auction closed.
Firearms, Militaria, & Sporting - Day 1

Firearms, Militaria, & Sporting - Day 1

Tuesday, October 30, 2018  |  9:00 AM Eastern
Auction closed.
Internet Premium: 26%
See Special Terms for additional fees
Cash Payment Discount: 3%
Share:

Description

Auction starts at 9am (EST).

Morphy Auctions


(877) 968-8880
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 13 of 16

(A) Antique Colt .45 Single Action Army Revolver (1892).

Lot # 305 (Sale Order: 301 of 399)      

This high condition, all original antique Colt Single Action Army has the first year traversing pin in frame. Features the blued and case colored finish with black Colt gutta percha grips. CONDITION: This is extremely fine and in all original condition; found in the antique Colt serial range. The barrel retains approximately 95% original factory blue with some high edge wear and sharp legends. The ejector housing has brilliant blue in recess, balance grey. Cylinder has drag line and overall high edge wear; still remains at 90%. Backstrap has fine factory blue at top of straps with traces on rear. Trigger guard has approximately 20%. The grips are proper type but are numbered to another gun. Frame retains approximately 95% of the original case colors, most bright. Indexes and locks up like a new revolver. Mirror bore. Beautiful, antique Colt Army. Barrel Length: 7 - 1/2" Caliber/Bore: .45 Colt FFL Status: Antique Manufacturer: Colt Model: SAA Paperwork : No Serial Number: 146401
This high condition, all original antique Colt Single Action Army has the first year traversing pin in frame. Features the blued and case colored finish with black Colt ...moregutta percha grips. CONDITION: This is extremely fine and in all original condition; found in the antique Colt serial range. The barrel retains approximately 95% original factory blue with some high edge wear and sharp legends. The ejector housing has brilliant blue in recess, balance grey. Cylinder has drag line and overall high edge wear; still remains at 90%. Backstrap has fine factory blue at top of straps with traces on rear. Trigger guard has approximately 20%. The grips are proper type but are numbered to another gun. Frame retains approximately 95% of the original case colors, most bright. Indexes and locks up like a new revolver. Mirror bore. Beautiful, antique Colt Army. Barrel Length: 7 - 1/2" Caliber/Bore: .45 Colt FFL Status: Antique Manufacturer: Colt Model: SAA Paperwork : No Serial Number: 146401

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Cased Engraved Colt London 1851 Navy Percussion Revolver (1860).

Lot # 306 (Sale Order: 302 of 399)      

Revolver is a Fourth Type with large iron trigger guard. This London Navy has full or matching serial numbers on frame, barrel, trigger guard, backstrap, cylinder, wedge, loading lever and cylinder pin. Octagon barrel has the stamped address "COL. COLT LONDON", Type I page 170 in the book on Navy pistols by Jordan and Geri. Left barrel flat has London proofs. The only engraving on the gun are the lower left and right sides of frame and the iron backstrap. Iron trigger guard is not engraved, nor are the shields or barrel. Colt's patent is stamped on left side of frame, not engraved. Grips are finely checkered walnut with a lanyard hole on both sides at bottom rear. The non-fluted cylinder is devoid any Naval scene and there was never one applied. English proofs at the rear of cylinder between each chamber. Engraving on backstrap comes approximately halfway down with more at base, and some one has etched the number "30" into it. CONDITION: Octagon barrel retains approximately 20% bright blue, balance has flaked. Razor sharp edges and legends. Cylinder retains approximately 50% of the bright blue finish. Nipples and safety pins are complete. Frame is basically soft patina with no traces of color. Straps and trigger guard are grey patina. Grips show some high edge wear. Indexes and locks up perfectly. Bore has sharp grooves, lightly frosted lands and minor residue. Unusual engraved London Navy with unique grips. Comes in a walnut display box with reproduction label, Eley cap tin, Colt two cavity bullet mold and a blued screwdriver nipple tool. Handsome, early London Navy. Accessories : Case with Accessories Barrel Length: 7 - 1/2" Caliber/Bore: .36 Percussion FFL Status: Antique Manufacturer: Colt Model: 1851 Navy Paperwork : Yes Serial Number: 23375
Revolver is a Fourth Type with large iron trigger guard. This London Navy has full or matching serial numbers on frame, barrel, trigger guard, backstrap, cylinder, wedge...more, loading lever and cylinder pin. Octagon barrel has the stamped address "COL. COLT LONDON", Type I page 170 in the book on Navy pistols by Jordan and Geri. Left barrel flat has London proofs. The only engraving on the gun are the lower left and right sides of frame and the iron backstrap. Iron trigger guard is not engraved, nor are the shields or barrel. Colt's patent is stamped on left side of frame, not engraved. Grips are finely checkered walnut with a lanyard hole on both sides at bottom rear. The non-fluted cylinder is devoid any Naval scene and there was never one applied. English proofs at the rear of cylinder between each chamber. Engraving on backstrap comes approximately halfway down with more at base, and some one has etched the number "30" into it. CONDITION: Octagon barrel retains approximately 20% bright blue, balance has flaked. Razor sharp edges and legends. Cylinder retains approximately 50% of the bright blue finish. Nipples and safety pins are complete. Frame is basically soft patina with no traces of color. Straps and trigger guard are grey patina. Grips show some high edge wear. Indexes and locks up perfectly. Bore has sharp grooves, lightly frosted lands and minor residue. Unusual engraved London Navy with unique grips. Comes in a walnut display box with reproduction label, Eley cap tin, Colt two cavity bullet mold and a blued screwdriver nipple tool. Handsome, early London Navy. Accessories : Case with Accessories Barrel Length: 7 - 1/2" Caliber/Bore: .36 Percussion FFL Status: Antique Manufacturer: Colt Model: 1851 Navy Paperwork : Yes Serial Number: 23375

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Rare Shoulder Stock Cut Martial Colt Model 1851 Navy Percussion Revolver (1857).

Lot # 307 (Sale Order: 303 of 399)      

This is considered a late Third Model with the enlarged beveled loading cut-out. Has the Colt factory dovetail sight that first appeared on the Third Model. Hartford address on barrel. This Navy falls into the last batch of US Navies between serial number 78500 and 80200 with the small iron trigger guard. Most small iron trigger guard US Navies after serial No. 72624 have the Hartford barrel address. This example also has the rare shoulder stock cut out on backstrap with the lanyard loop mounted in front of trigger guard; only 275 of these models were manufactured for shoulder stocks according to the book on Colt 1851 and 1861 Navies by Jordan and Geri. This Martial pistol does not have the US stamp on frame, simply Colt's patent. This is considered a Navy-Army with a serial number that falls in between the early purchases and late purchases, and also has the Army inspector "K" stamp on left front trigger bow. The book notes a mere 12 Second Model stocked OM Navies. Other features of this rare Navy include a large Naval anchor stamped on right grip (probably not factory), left rear trigger bow has inspector stamp "G" (not listed in book), bottom left side of barrel has a "2". According to the book, the Army did not buy any stocked '51 Navies but the only two inspector marks on the left trigger bow, are "K" and "G". The front of the cylinder is stamped with the asterisk. Walnut stocks are oil finish but there are no inspector stamps visible. Full or partial matching serial numbers on frame, barrel, trigger guard, backstrap, cylinder, wedge, loading lever and cylinder post. CONDITION: All metal on gun is basically a soft, grey patina. Muzzle is slightly worn from holster. The Naval battle scene on cylinder is strong and 80% visible. Stocks are in excellent condition and proud to metal. Indexes and locks up correctly. Strong, clean bore. This begs the question: if the Army did not buy stocked Navies, and this has an Army inspector stamp and falls between the two Army purchases, was it purchased and simply not recorded or is it a civilian purchase where a gun was built using an Army inspected small iron trigger guard with lanyard attachment to match the buttstock attachment on backstrap? In either case, it is an extremely rare and clean revolver. Barrel Length: 7 - 1/2" Caliber/Bore: .36 Percussion FFL Status: Antique Manufacturer: Colt Model: 1851 Navy Paperwork : No Serial Number: 79369
This is considered a late Third Model with the enlarged beveled loading cut-out. Has the Colt factory dovetail sight that first appeared on the Third Model. Hartford ad...moredress on barrel. This Navy falls into the last batch of US Navies between serial number 78500 and 80200 with the small iron trigger guard. Most small iron trigger guard US Navies after serial No. 72624 have the Hartford barrel address. This example also has the rare shoulder stock cut out on backstrap with the lanyard loop mounted in front of trigger guard; only 275 of these models were manufactured for shoulder stocks according to the book on Colt 1851 and 1861 Navies by Jordan and Geri. This Martial pistol does not have the US stamp on frame, simply Colt's patent. This is considered a Navy-Army with a serial number that falls in between the early purchases and late purchases, and also has the Army inspector "K" stamp on left front trigger bow. The book notes a mere 12 Second Model stocked OM Navies. Other features of this rare Navy include a large Naval anchor stamped on right grip (probably not factory), left rear trigger bow has inspector stamp "G" (not listed in book), bottom left side of barrel has a "2". According to the book, the Army did not buy any stocked '51 Navies but the only two inspector marks on the left trigger bow, are "K" and "G". The front of the cylinder is stamped with the asterisk. Walnut stocks are oil finish but there are no inspector stamps visible. Full or partial matching serial numbers on frame, barrel, trigger guard, backstrap, cylinder, wedge, loading lever and cylinder post. CONDITION: All metal on gun is basically a soft, grey patina. Muzzle is slightly worn from holster. The Naval battle scene on cylinder is strong and 80% visible. Stocks are in excellent condition and proud to metal. Indexes and locks up correctly. Strong, clean bore. This begs the question: if the Army did not buy stocked Navies, and this has an Army inspector stamp and falls between the two Army purchases, was it purchased and simply not recorded or is it a civilian purchase where a gun was built using an Army inspected small iron trigger guard with lanyard attachment to match the buttstock attachment on backstrap? In either case, it is an extremely rare and clean revolver. Barrel Length: 7 - 1/2" Caliber/Bore: .36 Percussion FFL Status: Antique Manufacturer: Colt Model: 1851 Navy Paperwork : No Serial Number: 79369

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Cased & Engraved French or Belgian Howdah Over-Under Percussion Pistol.

Lot # 308 (Sale Order: 304 of 399)      

This exquisite over-under large bore pistol has double exposed dolphin hammers, over-under brown Damascus barrels, double triggers, round butt walnut stock. Features breech swivel on left side of barrels, side lockplates engraved as well as hammer in a small scroll vine. Engraving on bottom of frame, top tang, front strap and rear plate. CONDITION: Gun is in fine condition. Near perfect patterns on Damascus barrels. All steel parts besides barrels are basically in the white. Excellent to near mint stock with usual fine abrasions. Beautiful bores and fine action. Cased in oak display case with brass charger, contemporary bullet mold and new nipples. These pistols were intended for the hunting of tigers on the seat of a howdah. Accessories : Case, Accessories Barrel Length: 6 - 1/2" Caliber/Bore: 12 Bore FFL Status: Antique Manufacturer: French/Belgian Model: Howdah Over Under Paperwork : No Serial Number: NSN
This exquisite over-under large bore pistol has double exposed dolphin hammers, over-under brown Damascus barrels, double triggers, round butt walnut stock. Features bre...moreech swivel on left side of barrels, side lockplates engraved as well as hammer in a small scroll vine. Engraving on bottom of frame, top tang, front strap and rear plate. CONDITION: Gun is in fine condition. Near perfect patterns on Damascus barrels. All steel parts besides barrels are basically in the white. Excellent to near mint stock with usual fine abrasions. Beautiful bores and fine action. Cased in oak display case with brass charger, contemporary bullet mold and new nipples. These pistols were intended for the hunting of tigers on the seat of a howdah. Accessories : Case, Accessories Barrel Length: 6 - 1/2" Caliber/Bore: 12 Bore FFL Status: Antique Manufacturer: French/Belgian Model: Howdah Over Under Paperwork : No Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Factory Cased Kynoch Double Action Revolver.

Lot # 309 (Sale Order: 305 of 399)      

Built at the Kynoch Gun Factory in Aston, they are well known for their cartridges but their revolvers are almost never seen. This is the first that we have offered. It is a break open, tip-up, six shot, double action, hammerless with double trigger than can either be used as a set trigger or an impossible double action pull. Very unusual design. Features blued finish and one piece fine checkered walnut grips with lanyard ring in butt. Numerous British proofs. CONDITION: Retains 98% of a dull English matte blue finish. Grips are near mint with a couple of dings. Housed in a leather covered oak case with the Kynoch label in lid. Includes cleaning rod and oil bottle. Accessories : Case Barrel Length: 6" Caliber/Bore: .476 CF FFL Status: Antique Manufacturer: Kynoch Model: Double Action Revolver Paperwork : No Serial Number: 341
Built at the Kynoch Gun Factory in Aston, they are well known for their cartridges but their revolvers are almost never seen. This is the first that we have offered. It...more is a break open, tip-up, six shot, double action, hammerless with double trigger than can either be used as a set trigger or an impossible double action pull. Very unusual design. Features blued finish and one piece fine checkered walnut grips with lanyard ring in butt. Numerous British proofs. CONDITION: Retains 98% of a dull English matte blue finish. Grips are near mint with a couple of dings. Housed in a leather covered oak case with the Kynoch label in lid. Includes cleaning rod and oil bottle. Accessories : Case Barrel Length: 6" Caliber/Bore: .476 CF FFL Status: Antique Manufacturer: Kynoch Model: Double Action Revolver Paperwork : No Serial Number: 341

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Cased Loewe C93 Borchardt Semi Automatic Pistol with Shoulder Stock.

Lot # 310 (Sale Order: 306 of 399)      

Manufactured by Waffenfabrik Loewe in Berlin Germany. The System Borchardt C93 pistol was one of the first successful magazine fed semi-automatic pistols sold commercially. It was also the first automatic pistol to be tested by the U.S. Military. BUG proofed on the left side of barrel. BU proofed of left side of receiver. D.R.P. No.75837 on center toggle link. Waffenfabrik Loewe Berlin over the chamber.Serial number on trigger, stock lug and at the magazine well on the frame. Gun retains approximately 90% of the original rust blue finish. A few spots of freckling. Checkered wood grips with a boarder. Matching eight round magazine, and two non-matching magazines. One is number 645 the other is 674. Poor bore showing some pitting. Comes with a non-matching numbered wood stock number 524. Cheek piece is non-matching numbered 824. Incomplete wood magazine cleaning kit. Comes in an original Borchardt case with green felt lining. Leather carry handle is missing. A very high condition and desirable gun in an original case. Accessories : Case, Shoulder Stock, Three Magazines. Barrel Length: 7 - 1/2" Caliber/Bore: 7.63 Borchardt FFL Status: Antique Manufacturer: Loewe Model: C93 Borchardt Paperwork : No Serial Number: 500
Manufactured by Waffenfabrik Loewe in Berlin Germany. The System Borchardt C93 pistol was one of the first successful magazine fed semi-automatic pistols sold commercial...morely. It was also the first automatic pistol to be tested by the U.S. Military. BUG proofed on the left side of barrel. BU proofed of left side of receiver. D.R.P. No.75837 on center toggle link. Waffenfabrik Loewe Berlin over the chamber.Serial number on trigger, stock lug and at the magazine well on the frame. Gun retains approximately 90% of the original rust blue finish. A few spots of freckling. Checkered wood grips with a boarder. Matching eight round magazine, and two non-matching magazines. One is number 645 the other is 674. Poor bore showing some pitting. Comes with a non-matching numbered wood stock number 524. Cheek piece is non-matching numbered 824. Incomplete wood magazine cleaning kit. Comes in an original Borchardt case with green felt lining. Leather carry handle is missing. A very high condition and desirable gun in an original case. Accessories : Case, Shoulder Stock, Three Magazines. Barrel Length: 7 - 1/2" Caliber/Bore: 7.63 Borchardt FFL Status: Antique Manufacturer: Loewe Model: C93 Borchardt Paperwork : No Serial Number: 500

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Factory Engraved New Haven Arms Volcanic #1 Target pistol

Lot # 311 (Sale Order: 307 of 399)      

Chambered for the Volcanic #1 cartridge (.31Cal) The six inch barreled variation is found very infrequently. A total production of 225 Target models were produced from 1857 through 1862. Of this limited production , engraved example are considered rare. Total production of the new Haven Volcanic pistols is estimated at 3300. These are first successful repeating cartridge pistols manufactured in the United States and were the beginning of the Winchester evolution. Barrel is marked "NEW HAVEN CONN PATENT FEB 14 1854" Gun metal brass frame wonderfully factory engraved with wide scrolls and a feathered border around ejection port and hammer. With iron ring lever and two piece carved bone grips with a spectacular Mexican Snake and Eagle motif . Serial numbered 1376 on frame under left grip. A magazine capacity of 8 rounds with the ability to have additional cartridges in the chamber as well as the lifter assembly for a total of 10 cartridges. CONDITION. Very Good. The pistol appears all original and authentic with exception of the period added grips. The gunmetal brass frame has turned a pleasant mustard patina. The barrel turned an even dove grey patina. All marking are clear and legible. The bore is very good with light pitting and with strong rifling. The two piece carved grips are outstanding and are certainly a carvers masterpiece. The frame and barrel have expected period wear with small scratches and a series of small dings in the butt The hammer fails to stay back when operated by the lever but functions properly when manually cocked. TDW Barrel Length: 6 Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: New Haven Arms Volcanic Model: #1 Target Serial Number: 1376
Chambered for the Volcanic #1 cartridge (.31Cal) The six inch barreled variation is found very infrequently. A total production of 225 Target models were produced from 18...more57 through 1862. Of this limited production , engraved example are considered rare. Total production of the new Haven Volcanic pistols is estimated at 3300. These are first successful repeating cartridge pistols manufactured in the United States and were the beginning of the Winchester evolution. Barrel is marked "NEW HAVEN CONN PATENT FEB 14 1854" Gun metal brass frame wonderfully factory engraved with wide scrolls and a feathered border around ejection port and hammer. With iron ring lever and two piece carved bone grips with a spectacular Mexican Snake and Eagle motif . Serial numbered 1376 on frame under left grip. A magazine capacity of 8 rounds with the ability to have additional cartridges in the chamber as well as the lifter assembly for a total of 10 cartridges. CONDITION. Very Good. The pistol appears all original and authentic with exception of the period added grips. The gunmetal brass frame has turned a pleasant mustard patina. The barrel turned an even dove grey patina. All marking are clear and legible. The bore is very good with light pitting and with strong rifling. The two piece carved grips are outstanding and are certainly a carvers masterpiece. The frame and barrel have expected period wear with small scratches and a series of small dings in the butt The hammer fails to stay back when operated by the lever but functions properly when manually cocked. TDW Barrel Length: 6 Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: New Haven Arms Volcanic Model: #1 Target Serial Number: 1376

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 11,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) New Haven Arms #1 Volcanic Target Pistol

Lot # 312 (Sale Order: 308 of 399)      

Chambered for the Volcanic #1 cartridge (.31 Cal) The six inch barreled variation is found very infrequently. A total production of 225 Target models were produced from 1857 through 1862. Total production of the new Haven Volcanic pistols is estimated at 3300. These are first successful repeating cartridge pistols manufactured in the United States and were the beginning of the Winchester evolution. Barrel is marked "NEW HAVEN CONN PATD FEB 14 1854" Brass frame with iron ring lever and two piece walnut grips. Serial numbered 505 on frame under left grip, both grips are serial number matching. A magazine capacity of 8 rounds with the ability to have additional cartridges in the chamber as well as the lifter assembly. CONDITION. Very Good. The pistol appears all original and authentic. The brass frame has turned a pleasant mustard patina. The barrel turned an even brown patina. All marking are clear and legible. The bore is bright and shiny with strong rifling. The two piece walnut grips are worn but full sized and solid with exception of a very small chip at base of right grip. The frame has several storage dings on the left side that in no way effect the guns functioning. The action is crisp and properly functioning. TDW Barrel Length: 6 Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: New Haven Arms Volcanic Model: #1 Target Serial Number: 505
Chambered for the Volcanic #1 cartridge (.31 Cal) The six inch barreled variation is found very infrequently. A total production of 225 Target models were produced from 1...more857 through 1862. Total production of the new Haven Volcanic pistols is estimated at 3300. These are first successful repeating cartridge pistols manufactured in the United States and were the beginning of the Winchester evolution. Barrel is marked "NEW HAVEN CONN PATD FEB 14 1854" Brass frame with iron ring lever and two piece walnut grips. Serial numbered 505 on frame under left grip, both grips are serial number matching. A magazine capacity of 8 rounds with the ability to have additional cartridges in the chamber as well as the lifter assembly. CONDITION. Very Good. The pistol appears all original and authentic. The brass frame has turned a pleasant mustard patina. The barrel turned an even brown patina. All marking are clear and legible. The bore is bright and shiny with strong rifling. The two piece walnut grips are worn but full sized and solid with exception of a very small chip at base of right grip. The frame has several storage dings on the left side that in no way effect the guns functioning. The action is crisp and properly functioning. TDW Barrel Length: 6 Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: New Haven Arms Volcanic Model: #1 Target Serial Number: 505

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) New Haven Arms Volcanic #1 Pocket Pistol

Lot # 313 (Sale Order: 309 of 399)      

Manufactured 1854 through 1860 the New Haven Arms Company produced a total of 3370 rifles , carbines and pistols. These innovative firearms were the beginning of the Winchester Repeating firearms dynasty and the first successful cartridge repeating pistols produced in the United States. The #1 Pocket pistol was chambered for the .31 CAL, Volcanic cartridge and had a magazine capacity of six rounds. Lever operated and equipped with a 3 1/2 inch octagon barrel and a frame constructed of a gun metal brass alloy. Two piece walnut grips were standard. The total production of these Pocket Model #1 pistols is estimated at 850. Mounted with a tapered post front sight and a drift adjustable rear sight dovetailed into position just forward of the hammer. This example is serial numbered 332 on the frame under the left grip. Both grips are also numbered 332 as well on their inside flats. CONDITION. Good overall as cleaned. The barrel markings are clear and legible, The blue finish has been enhanced at a more recent time and is now some what plum. The Brass frame has been slightly polished and has numerous small scratches as are to be expected. The two piece Walnut grips are solid and full sized. The right grip has a repair evident only when disassembled. The exterior of the grips have a contemporary finish applied and look very good. The action functions but hammer fails to stay to rear when operated by the lever, however functions properly when manually operated. The bore is very slightly frosted with very strong rifling. TDW Barrel Length: 3 - 1/2" Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: New Haven Arms Volcanic Model: Pocket Pistol Serial Number: 332
Manufactured 1854 through 1860 the New Haven Arms Company produced a total of 3370 rifles , carbines and pistols. These innovative firearms were the beginning of the Winc...morehester Repeating firearms dynasty and the first successful cartridge repeating pistols produced in the United States. The #1 Pocket pistol was chambered for the .31 CAL, Volcanic cartridge and had a magazine capacity of six rounds. Lever operated and equipped with a 3 1/2 inch octagon barrel and a frame constructed of a gun metal brass alloy. Two piece walnut grips were standard. The total production of these Pocket Model #1 pistols is estimated at 850. Mounted with a tapered post front sight and a drift adjustable rear sight dovetailed into position just forward of the hammer. This example is serial numbered 332 on the frame under the left grip. Both grips are also numbered 332 as well on their inside flats. CONDITION. Good overall as cleaned. The barrel markings are clear and legible, The blue finish has been enhanced at a more recent time and is now some what plum. The Brass frame has been slightly polished and has numerous small scratches as are to be expected. The two piece Walnut grips are solid and full sized. The right grip has a repair evident only when disassembled. The exterior of the grips have a contemporary finish applied and look very good. The action functions but hammer fails to stay to rear when operated by the lever, however functions properly when manually operated. The bore is very slightly frosted with very strong rifling. TDW Barrel Length: 3 - 1/2" Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: New Haven Arms Volcanic Model: Pocket Pistol Serial Number: 332

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A)Scarce New Haven/Volcanic No 1 Pocket Lever Action Pistol

Lot # 314 (Sale Order: 310 of 399)      

Cal 31. Usual configuration with 3-3/4" octagon barrel that has integral magazine and pinched post front sight. Fixed rear sight is in a dovetail in top flat of frame. Top flat of barrel has a 2-line New Haven address. Mounted with 2-pc smooth walnut grips matching numbered to this pistol. According to The Book Of Volcanic Firearms by Edmund Lewis about 3370 total pistols and carbines ere produced by New Haven Arms in the period 1857-1860. This design was descended from the earlier Smith & Wesson lever action pistols and the cartridge from the still earlier Hunt Rocket Ball Cartridge. Oliver Winchester had purchased the Volcanic Arms Co. and continued production until 1860. The design then evolved into the Model 1860 Henry rifle, the first truly successful lever action repeating cartridge rifle, and from there, in 1866 became the Winchester Repeating Arms Co. And as the saying goes, the rest is history. CONDITION: Very good. Serial number was observed on the frame and grips and both sideplates. Barrel is a deep coffee brown patina and appears to have been refinished many years ago with light surface pitting. Frame and side plates retain sharp edges with a few small nicks on the top side flat and shows a medium to dark mustard patina. Magazine spring is correct and functional, follower lever has been modified by shaving down both sides to reduce its width and firing pi is present but loose. Mechanics are fine. Bright shiny bore with two or three small spots of pitting. Grips are sound with some scattered scrape marks on sides and bottom edges showing moderate wear and retain most of an old finish. TDW Barrel Length: 3 - 3/4" Caliber/Bore: .36 RF FFL Status: Antique Manufacturer: New Haven/Volcanic Model: No 1 Pocket Paperwork : No Serial Number: 691
Cal 31. Usual configuration with 3-3/4" octagon barrel that has integral magazine and pinched post front sight. Fixed rear sight is in a dovetail in top flat of frame. To...morep flat of barrel has a 2-line New Haven address. Mounted with 2-pc smooth walnut grips matching numbered to this pistol. According to The Book Of Volcanic Firearms by Edmund Lewis about 3370 total pistols and carbines ere produced by New Haven Arms in the period 1857-1860. This design was descended from the earlier Smith & Wesson lever action pistols and the cartridge from the still earlier Hunt Rocket Ball Cartridge. Oliver Winchester had purchased the Volcanic Arms Co. and continued production until 1860. The design then evolved into the Model 1860 Henry rifle, the first truly successful lever action repeating cartridge rifle, and from there, in 1866 became the Winchester Repeating Arms Co. And as the saying goes, the rest is history. CONDITION: Very good. Serial number was observed on the frame and grips and both sideplates. Barrel is a deep coffee brown patina and appears to have been refinished many years ago with light surface pitting. Frame and side plates retain sharp edges with a few small nicks on the top side flat and shows a medium to dark mustard patina. Magazine spring is correct and functional, follower lever has been modified by shaving down both sides to reduce its width and firing pi is present but loose. Mechanics are fine. Bright shiny bore with two or three small spots of pitting. Grips are sound with some scattered scrape marks on sides and bottom edges showing moderate wear and retain most of an old finish. TDW Barrel Length: 3 - 3/4" Caliber/Bore: .36 RF FFL Status: Antique Manufacturer: New Haven/Volcanic Model: No 1 Pocket Paperwork : No Serial Number: 691

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Remington Model 1888 Single Action Revolver With Carved Ivory Grips.

Lot # 315 (Sale Order: 311 of 399)      

The rare Remington Model 1888 was built utilizing parts from the Remington model 1875 and 1890 revolvers. These guns were never truly cataloged by Remington themselves but appeared in 1888 being offered by Schuyler Hartley & Graham. Very few actual examples are known and are rarely found in fine condition. This example is chambered for the 44-40 Winchester cartridge and is mounted with a 5 3/4 inch barrel. Barrel address reads ""REMINGTON ARMS CO. ILION N.Y. " Cal, marking is "44W". Serial number is struck under the left grip on the frame and is "44". Mounted with lanyard swivel and finished in nickel. A spectacular pair of 1 1/2 piece carved ivory grips with a large Mexican Snake and Eagle with a checkered background are perfectly fitted to the gun and appear to be original. Fixed nickel silver blade front sight and grooved receiver rear sight. Full nickel finish overall with no other exterior markings. These extremely scarce revolvers where marketed at the high point of the "Cowboy" era and saw tremendous use. Provenance, Howard Resnick collection CONDITION. Very fine with Barrel and frame retaining over 80% of the original factory applied nickel finish with typical wear at muzzle and loss in the loading gate slot. The cylinder has nearly 50% of the nickel finish remaining with balance being a grey patination. The bore is rather dark with visible rifling. The chambers are lightly frosted. The action is crisp and in proper functioning order. TDW Barrel Length: 5 - 3/4" Caliber/Bore: 44-40 FFL Status: Antique Manufacturer: Remington Model: 1888 Paperwork : No Serial Number: 44
The rare Remington Model 1888 was built utilizing parts from the Remington model 1875 and 1890 revolvers. These guns were never truly cataloged by Remington themselves bu...moret appeared in 1888 being offered by Schuyler Hartley & Graham. Very few actual examples are known and are rarely found in fine condition. This example is chambered for the 44-40 Winchester cartridge and is mounted with a 5 3/4 inch barrel. Barrel address reads ""REMINGTON ARMS CO. ILION N.Y. " Cal, marking is "44W". Serial number is struck under the left grip on the frame and is "44". Mounted with lanyard swivel and finished in nickel. A spectacular pair of 1 1/2 piece carved ivory grips with a large Mexican Snake and Eagle with a checkered background are perfectly fitted to the gun and appear to be original. Fixed nickel silver blade front sight and grooved receiver rear sight. Full nickel finish overall with no other exterior markings. These extremely scarce revolvers where marketed at the high point of the "Cowboy" era and saw tremendous use. Provenance, Howard Resnick collection CONDITION. Very fine with Barrel and frame retaining over 80% of the original factory applied nickel finish with typical wear at muzzle and loss in the loading gate slot. The cylinder has nearly 50% of the nickel finish remaining with balance being a grey patination. The bore is rather dark with visible rifling. The chambers are lightly frosted. The action is crisp and in proper functioning order. TDW Barrel Length: 5 - 3/4" Caliber/Bore: 44-40 FFL Status: Antique Manufacturer: Remington Model: 1888 Paperwork : No Serial Number: 44

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Rare and Desirable Serial Number 1 Remington 1875 Revolver

Lot # 316 (Sale Order: 312 of 399)      

The Remington Model 1875 was introduced in the post civil war period and was in stiff competition with other manufacturers such as Colt and Merwin & Hulbert. With a production of between 30,000 to 40,000 with parts cleanup being used in the production of later models. An immediate success with its previously proven strong frame and simple internal construction these guns had a great following in the early Cowboy era. It all started with this serial number 1 Model 1875. Chambered for the proprietary .44 Remington cartridge. 7 1/2 inch barrel with early tapered post front sight and barrel marked "E.REMINGTON & SONS ILION N.Y. USA." grooved receiver rear sight. Finished in nickel finish with two piece smooth walnut grips and equipped with a swiveling lanyard loop. Serial number 1 is found under the left grip at base of frame, under barrel, inside ejector housing, on cylinder pin, on rear of cylinder as well on the inside of both walnut grips. Provenance, Former Arnold Chernoff collection Former Howard Resnick collection. CONDITION. Very good with over 85% of the factory applied nickel finish remaining on barrel , Frame and cylinder. Bore is very slightly frosted but has very strong rifling. Smooth walnut grips are very good with no cracks and or material loss. most original varnish remains with numerous small bruises and scratches. The action remains crisp and properly functioning. A very great opportunity to own the first full sized Remington cartridge revolver ever produced. TDW Barrel Length: 7 - 1/2" Caliber/Bore: 44 Remington FFL Status: Antique Manufacturer: Remington Model: 1875 Paperwork : Yes Serial Number: 1
The Remington Model 1875 was introduced in the post civil war period and was in stiff competition with other manufacturers such as Colt and Merwin & Hulbert. With a produ...morection of between 30,000 to 40,000 with parts cleanup being used in the production of later models. An immediate success with its previously proven strong frame and simple internal construction these guns had a great following in the early Cowboy era. It all started with this serial number 1 Model 1875. Chambered for the proprietary .44 Remington cartridge. 7 1/2 inch barrel with early tapered post front sight and barrel marked "E.REMINGTON & SONS ILION N.Y. USA." grooved receiver rear sight. Finished in nickel finish with two piece smooth walnut grips and equipped with a swiveling lanyard loop. Serial number 1 is found under the left grip at base of frame, under barrel, inside ejector housing, on cylinder pin, on rear of cylinder as well on the inside of both walnut grips. Provenance, Former Arnold Chernoff collection Former Howard Resnick collection. CONDITION. Very good with over 85% of the factory applied nickel finish remaining on barrel , Frame and cylinder. Bore is very slightly frosted but has very strong rifling. Smooth walnut grips are very good with no cracks and or material loss. most original varnish remains with numerous small bruises and scratches. The action remains crisp and properly functioning. A very great opportunity to own the first full sized Remington cartridge revolver ever produced. TDW Barrel Length: 7 - 1/2" Caliber/Bore: 44 Remington FFL Status: Antique Manufacturer: Remington Model: 1875 Paperwork : Yes Serial Number: 1

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) U.S. ID Marked Remington Model 1875 Revolver.

Lot # 317 (Sale Order: 313 of 399)      

This revolver is basically a standard factory nickel Model 1875 single action revolver in factory nickel plate with two piece walnut grips. These were made from 1875 to 1889. This revolver has mid-to-late-production features such as standard blade front, cone shaped firing pin and caliber stamped on left trigger bow. According to history, Remington at serial No. 12000 reverted back to serial No. 1, it is also known that in January of 1883 Remington accepted a contract and delivered approximately 639 nickel plated guns to the U.S. Interior Department for issue to Indian Police and/or Western reservations. Usual marks on this gun include the "1875" stamp on left grip indicating model not year, and left side of frame is stamped, using individual dies, "U.S.I.D.". The serial No. 412 is stamped inside both grip panels, inside frame, on back of cylinder and loading gate. Thorough research could not find any other example with the "U.S.I.D." stamp nor the 1875 on grip. It is unknown if this was a prototype for the original order nor who, what, when or where these markings were applied, although they appear to be contemporary to gun's manufacture. CONDITION: The one line barrel address is strong. Gun retains 75% or better original nickel finish. Excellent condition indexes and locks up fine with strong rifling, albeit some light corrosion in grooves. With no other matching examples, it is impossible to determine when and by whom these markings were applied. The areas where nickel is not present is mixed with light grey patina. Screws still retain generous amounts of nitre blue. A beautiful and famous revolver that is associated and attributed to the Indian Reservation police. In the Flayderman book, Norm states that how these guns were marked is undetermined. Barrel Length: 7 - 1/2" Caliber/Bore: .44-40 FFL Status: Antique Manufacturer: Remington Model: 1875 Revolver Paperwork : No Serial Number: 412
This revolver is basically a standard factory nickel Model 1875 single action revolver in factory nickel plate with two piece walnut grips. These were made from 1875 to ...more1889. This revolver has mid-to-late-production features such as standard blade front, cone shaped firing pin and caliber stamped on left trigger bow. According to history, Remington at serial No. 12000 reverted back to serial No. 1, it is also known that in January of 1883 Remington accepted a contract and delivered approximately 639 nickel plated guns to the U.S. Interior Department for issue to Indian Police and/or Western reservations. Usual marks on this gun include the "1875" stamp on left grip indicating model not year, and left side of frame is stamped, using individual dies, "U.S.I.D.". The serial No. 412 is stamped inside both grip panels, inside frame, on back of cylinder and loading gate. Thorough research could not find any other example with the "U.S.I.D." stamp nor the 1875 on grip. It is unknown if this was a prototype for the original order nor who, what, when or where these markings were applied, although they appear to be contemporary to gun's manufacture. CONDITION: The one line barrel address is strong. Gun retains 75% or better original nickel finish. Excellent condition indexes and locks up fine with strong rifling, albeit some light corrosion in grooves. With no other matching examples, it is impossible to determine when and by whom these markings were applied. The areas where nickel is not present is mixed with light grey patina. Screws still retain generous amounts of nitre blue. A beautiful and famous revolver that is associated and attributed to the Indian Reservation police. In the Flayderman book, Norm states that how these guns were marked is undetermined. Barrel Length: 7 - 1/2" Caliber/Bore: .44-40 FFL Status: Antique Manufacturer: Remington Model: 1875 Revolver Paperwork : No Serial Number: 412

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

(A) Cased Pair of Japanese Engraved Smith & Wesson No. 3 Revolvers with Carved Pearl Grips.

Lot # 318 (Sale Order: 314 of 399)      

Both revolvers features top break, six shot, single action, blued finish. Enclosed is a copy of the Roy Jinks letter on both revolvers. Serial No. 28983 was shipped from factory August 12th, 1896 delivered to Takata & Co., Yokohama, Japan. Shipped with 6-1/2" barrel, blued finish, lanyard ring in butt and black hard rubber grips. Serial No. 31303 was also shipped to Takata & Co. on October 28th, 1896, a little over two months after the first gun; shipped in the same configuration. Roy Jinks wrote these letters on behalf of Smith & Wesson on May 27th, 1999. On the left side of both barrels you will fine engraved Japanese Kanji and interpreted in a letter by Yasuhiko Kaji, M.D., Ph.D. who was living in Toledo, Ohio at the time; "Emperor (Superior Position) presents (gives down) this item to his servant (lower position) Yamagata Aritomo (recipients name)". Yamagata Aritomo was born a samurai in 1838 under Emperor Meiji, who rose to the position of prime minister before the turn of the century. Around the approximate time of shipment of these guns. Prior to that, he was a military leader of great renown and was considered the "Architect" of the modern Japanese Army following the of Japan. His military post included field commander, assistant vice minister of military affairs, Army minister in the 1870's, chief of general staff beginning in 1878, and eventually a full general. Sometime after the delivery of these two weapons in 1896, the emperor commissioned a Japanese artisan, upon which the guns were engraved with the Kanji presentation, light sporadic scroll engraving that can be found on every area of the weapon including frame, barrel, cylinder and backstrap. The guns were finished in a rich royal blue finish after which he applied gold damascene border around sides of both left and right frame. The hammer and trigger guard were beautifully case colored and both revolvers sport two piece relief carved real Mother of Pearl grips with roses and rose leaves. CODNITION: Barrels and frame retain virtually all of their custom reapplied blue finish performed at time of engraving. Gun (B) cylinder exhibits several striations while Gun (A) simply has a light drag line. Grips are near mint with no chips or cracks that we can see, with the exception of Gun (A) that has a forward toe repair (minor) and grips have darkened a bit more. Both guns have near mint, shiny bores with sharp rifling and index correctly. Accompanying these revolvers is a copy of the letter from John Snyder, business manager OGCA dated May 14th, 1999 requesting information on these guns from Roy Jinks; a photocopy of the Emperor Meiji as a young man, taken in 1868 as well as an image of Yamagata Arimoto; numerous copies of photographs of this pair; copies of pages from the book "Japan's Secret Imperial Conspiracy" dealing with Yamagata; and a catalog "Old Town Station Dispatch No. 7" from the year 2000 with a picture of these revolvers on the cover of the catalog. They were offered at one time for sale by Jim Supica for the princely sum of $50,000 at the turn of this century. This set of pistols is currently housed in a leather carry case. The revolvers themselves are not accompanied by any lineage history aside from factory letter and how they were presented in 1999-2000. An exquisite pair of Smith & Wesson New Model No. 3 revolvers and truly unique. Accessories : Case Barrel Length: 6 - 1/2" Caliber/Bore: .44 Russian FFL Status: Antique Manufacturer: Smith & Wesson Model: No. 3 Paperwork : No Serial Number: 31303,
Both revolvers features top break, six shot, single action, blued finish. Enclosed is a copy of the Roy Jinks letter on both revolvers. Serial No. 28983 was shipped fro...morem factory August 12th, 1896 delivered to Takata & Co., Yokohama, Japan. Shipped with 6-1/2" barrel, blued finish, lanyard ring in butt and black hard rubber grips. Serial No. 31303 was also shipped to Takata & Co. on October 28th, 1896, a little over two months after the first gun; shipped in the same configuration. Roy Jinks wrote these letters on behalf of Smith & Wesson on May 27th, 1999. On the left side of both barrels you will fine engraved Japanese Kanji and interpreted in a letter by Yasuhiko Kaji, M.D., Ph.D. who was living in Toledo, Ohio at the time; "Emperor (Superior Position) presents (gives down) this item to his servant (lower position) Yamagata Aritomo (recipients name)". Yamagata Aritomo was born a samurai in 1838 under Emperor Meiji, who rose to the position of prime minister before the turn of the century. Around the approximate time of shipment of these guns. Prior to that, he was a military leader of great renown and was considered the "Architect" of the modern Japanese Army following the of Japan. His military post included field commander, assistant vice minister of military affairs, Army minister in the 1870's, chief of general staff beginning in 1878, and eventually a full general. Sometime after the delivery of these two weapons in 1896, the emperor commissioned a Japanese artisan, upon which the guns were engraved with the Kanji presentation, light sporadic scroll engraving that can be found on every area of the weapon including frame, barrel, cylinder and backstrap. The guns were finished in a rich royal blue finish after which he applied gold damascene border around sides of both left and right frame. The hammer and trigger guard were beautifully case colored and both revolvers sport two piece relief carved real Mother of Pearl grips with roses and rose leaves. CODNITION: Barrels and frame retain virtually all of their custom reapplied blue finish performed at time of engraving. Gun (B) cylinder exhibits several striations while Gun (A) simply has a light drag line. Grips are near mint with no chips or cracks that we can see, with the exception of Gun (A) that has a forward toe repair (minor) and grips have darkened a bit more. Both guns have near mint, shiny bores with sharp rifling and index correctly. Accompanying these revolvers is a copy of the letter from John Snyder, business manager OGCA dated May 14th, 1999 requesting information on these guns from Roy Jinks; a photocopy of the Emperor Meiji as a young man, taken in 1868 as well as an image of Yamagata Arimoto; numerous copies of photographs of this pair; copies of pages from the book "Japan's Secret Imperial Conspiracy" dealing with Yamagata; and a catalog "Old Town Station Dispatch No. 7" from the year 2000 with a picture of these revolvers on the cover of the catalog. They were offered at one time for sale by Jim Supica for the princely sum of $50,000 at the turn of this century. This set of pistols is currently housed in a leather carry case. The revolvers themselves are not accompanied by any lineage history aside from factory letter and how they were presented in 1999-2000. An exquisite pair of Smith & Wesson New Model No. 3 revolvers and truly unique. Accessories : Case Barrel Length: 6 - 1/2" Caliber/Bore: .44 Russian FFL Status: Antique Manufacturer: Smith & Wesson Model: No. 3 Paperwork : No Serial Number: 31303,

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 18,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Boxed Smith & Wesson No. 3 Russian 1st Model Single Action Revolver with Pearl Grips.

Lot # 319 (Sale Order: 315 of 399)      

Referred to as the First Model Russian, Old Model Russian or Model No. 3 Russian First Model; manufactured 1871 to 1874. American market guns numbered 6000 to 32800. These were tip-up models on hinged frame with nickel finish, case colored hammer and trigger guard, lanyard ring and real Mother of Pearl grips. Back of the cylinder is stamped "H95". "H95" is also stamped on back of barrel, cylinder release latch and barrel release latch. CONDITION: The cylinder on this rare revolver shows no signs of burn nor any signs of having been fired. Cylinder has a light drag line with minor high edge wear. A hint of wear at muzzle and minor handling marks. Nickel has turned a soft, cloudy tone; still retains 95-97% overall. Pearl grips have beautiful color and are near mint. Strong case colors on hammer. Traces of case colors on trigger guard. 98% plating on trigger. Locks up like new with near mint bore. Comes with a period green linen covered hinged box with no markings of any kind. Extremely high grade example of a scarce First Model Russian revolver. Accessories : Box Barrel Length: 8" Caliber/Bore: .44 Russian FFL Status: Antique Manufacturer: Smith & Wesson Model: No. 3 Russian 1st Model Paperwork : No Serial Number: 15484
Referred to as the First Model Russian, Old Model Russian or Model No. 3 Russian First Model; manufactured 1871 to 1874. American market guns numbered 6000 to 32800. Th...moreese were tip-up models on hinged frame with nickel finish, case colored hammer and trigger guard, lanyard ring and real Mother of Pearl grips. Back of the cylinder is stamped "H95". "H95" is also stamped on back of barrel, cylinder release latch and barrel release latch. CONDITION: The cylinder on this rare revolver shows no signs of burn nor any signs of having been fired. Cylinder has a light drag line with minor high edge wear. A hint of wear at muzzle and minor handling marks. Nickel has turned a soft, cloudy tone; still retains 95-97% overall. Pearl grips have beautiful color and are near mint. Strong case colors on hammer. Traces of case colors on trigger guard. 98% plating on trigger. Locks up like new with near mint bore. Comes with a period green linen covered hinged box with no markings of any kind. Extremely high grade example of a scarce First Model Russian revolver. Accessories : Box Barrel Length: 8" Caliber/Bore: .44 Russian FFL Status: Antique Manufacturer: Smith & Wesson Model: No. 3 Russian 1st Model Paperwork : No Serial Number: 15484

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) US Smith & Wesson Schofield Revolver Attributed to Frank James.

Lot # 320 (Sale Order: 316 of 399)      

A total of 5,934 manufactured for the US Government 1876 to 1877. This model was built on the top break frame, improved version of first model. Left grip appears to have matching number. Right panel also has a number but is hard to read and does not appear to be 5476. Left grip appears to have a small "F.J.". "US" stamp on bottom of butt. "5476" and "P" stamped on back of cylinder. CONDITION: All legends are sharp. Strong, clean rifled bore with distinct lands and grooves. Cartouche on left side of grip is visible but not readable. All metal is gun metal grey with a freckled barrel. Traces of color on hammer. Indexes and locks up correctly. All left frame screws are slightly boogered. Grips are excellent and slightly shy to metal. This gun has been attributed to Frank James and accompanied by a State of Minnesota affidavit sworn by Carroll A. Ray, eldest grandson of P.G. Carroll, in 1953. According to Philip Gregory Carroll, he witnessed the robbery of the First National Bank of Norfield, Minnesota. At approximately 2pm on September 7th, 1876 he was standing on the hotel veranda when the robbers poured out of the bank and gunfire erupted in the street. After approximately one minute of shooting, several of the robbers fled on their horses and rode out of town, with Mr. Carroll witnessing a tall mount drop a revolver while mounting his horse. Mr. Carroll then retrieved the Smith & Wesson Schofield revolver. All but two of the gang were able to escape. Paperwork appears to be parchment paper. Aside from the "FB" on grips and affidavit we have no other way to determine validity of letter. It was the type of gun favored by Frank James. Nice Second Model with purported history. Previously sold in a Julia's auction; it is worth between $3,000 an $5,000 dollars as a Schofield revolver and the value added by this singular piece of paper without any further substantiation is strictly subjective as we do not feel the presented evidence is enough to completely verify the history as it is currently presented, but it is a great gun nonetheless and offers a very interesting story. Accessories : Case Barrel Length: 7" Caliber/Bore: .45 Schofield FFL Status: Antique Manufacturer: Smith & Wesson Model: Schofield Paperwork : Yes Serial Number: 5476
A total of 5,934 manufactured for the US Government 1876 to 1877. This model was built on the top break frame, improved version of first model. Left grip appears to hav...moree matching number. Right panel also has a number but is hard to read and does not appear to be 5476. Left grip appears to have a small "F.J.". "US" stamp on bottom of butt. "5476" and "P" stamped on back of cylinder. CONDITION: All legends are sharp. Strong, clean rifled bore with distinct lands and grooves. Cartouche on left side of grip is visible but not readable. All metal is gun metal grey with a freckled barrel. Traces of color on hammer. Indexes and locks up correctly. All left frame screws are slightly boogered. Grips are excellent and slightly shy to metal. This gun has been attributed to Frank James and accompanied by a State of Minnesota affidavit sworn by Carroll A. Ray, eldest grandson of P.G. Carroll, in 1953. According to Philip Gregory Carroll, he witnessed the robbery of the First National Bank of Norfield, Minnesota. At approximately 2pm on September 7th, 1876 he was standing on the hotel veranda when the robbers poured out of the bank and gunfire erupted in the street. After approximately one minute of shooting, several of the robbers fled on their horses and rode out of town, with Mr. Carroll witnessing a tall mount drop a revolver while mounting his horse. Mr. Carroll then retrieved the Smith & Wesson Schofield revolver. All but two of the gang were able to escape. Paperwork appears to be parchment paper. Aside from the "FB" on grips and affidavit we have no other way to determine validity of letter. It was the type of gun favored by Frank James. Nice Second Model with purported history. Previously sold in a Julia's auction; it is worth between $3,000 an $5,000 dollars as a Schofield revolver and the value added by this singular piece of paper without any further substantiation is strictly subjective as we do not feel the presented evidence is enough to completely verify the history as it is currently presented, but it is a great gun nonetheless and offers a very interesting story. Accessories : Case Barrel Length: 7" Caliber/Bore: .45 Schofield FFL Status: Antique Manufacturer: Smith & Wesson Model: Schofield Paperwork : Yes Serial Number: 5476

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to F****6! to YOU!

Placing your bid. please wait...

(A) Pipe Cased New York Engraved & Gold Plated Smith & Wesson 1st Model 3rd Issue Spur Trigger Revol

Lot # 321 (Sale Order: 317 of 399)      

Manufactured 1868 to 1881. This near mint little revolver shows nearly full coverage New York engraving and has been gilded with the exception of the nickel hammer, barrel release, top spring, cylinder pin, springs, and screws, which are all natural finish. CONDITION: Near mint condition overall, retaining the majority of the gold that was applied after the New York engraving was finished. Excellent rosewood grips. Comes in a Smith & Wesson stamped pipe case. This is very similar to the Annie Oakley gun pictured on page 78 in the "Smith & Wesson Catalog, 2nd Edition". Accessories : Case Barrel Length: 3" Caliber/Bore: .22 Short FFL Status: Antique Manufacturer: S&W Model: 1st Model 3rd Issue Paperwork : No Serial Number: 1660
Manufactured 1868 to 1881. This near mint little revolver shows nearly full coverage New York engraving and has been gilded with the exception of the nickel hammer, barr...moreel release, top spring, cylinder pin, springs, and screws, which are all natural finish. CONDITION: Near mint condition overall, retaining the majority of the gold that was applied after the New York engraving was finished. Excellent rosewood grips. Comes in a Smith & Wesson stamped pipe case. This is very similar to the Annie Oakley gun pictured on page 78 in the "Smith & Wesson Catalog, 2nd Edition". Accessories : Case Barrel Length: 3" Caliber/Bore: .22 Short FFL Status: Antique Manufacturer: S&W Model: 1st Model 3rd Issue Paperwork : No Serial Number: 1660

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Pair of Identified French Silver Mounted Flintlock Pistols & A Powder Horn Belonging to Thomas S

Lot # 322 (Sale Order: 318 of 399)      

Comprising: A) Fine pair of French flintlock officer's pistols with tapered round steel barrels with partial flat rib on tops, mounted with silver half-moon front sights. Flat lockplates engraved with shells at rear tangs and inscribed in centers "Thiolliere/ le Jeune". " Rogers took the pistols from a French officer during the French and Indian War. Solid sterling silver mounts have French hallmarks. Pierced and chiseled sideplates display fine foliate scrolls and serpents at backs, pierced silver wrist escutcheons have crowns over vacant panels with masks below. Triggerguards have relief panels on bows and terminate in acanthus leaf finials. Stirruped buttcaps have portraits of king on one and queen on the other, sides with grotesque masks and scrollwork in high relief. Walnut stocks are profusely carved with relief scrolls and shell designs around entry ferrules and barrel tangs. Complete with period bone-tipped wooden ramrods. CONDITION: Good. Locks and barrels show some wear and retain a light grey freckled patina, some heavier corrosion around toucholes. Locks are in their original flintlock configuration. Silver retains a grey patina, darker in protected areas, a few scattered marks and some light high edge wear. Stocks good with some age cracks and scattered marks, one internal mainspring has pushed the wood and it is bowed slightly. Part of one silver gripcap stirrup has been replaced. A very ornate and attractive pair of pre-French and Indian War period pistols. These pistols are one of only three or four pairs known by this maker. The Thiollere family lived in St. Etienne, France. From the early 1600's, they had a colliery and were advisors to the royal family. The escutcheons on both pistols bear the crest of Hussar Colonel Count Andrassy. B) Powder Horn of Thomas Simons, dated 1762. According to family tradition the powder horn was given to Rogers by a Native American chief. The curved 13" body retains a pleasing dark honey patina and has not been cleaned. The butt is a convex wood plug with a brass knob. The spout has one relief ring and scalloped edge between sections. The horn is lightly carved with scenes of ships at anchor flying the colonial American flag, a 13 stripe flag with a British Union Jack in the canton. Also depicted is a town square with a church and buildings, perhaps colonial Salem, Massachusetts. CONDITION: Very good, showing some light wear from carrying. Strap is associated and is a later addition. This powder horn, along with the pistols, was passed down through Lieutenant Patrick Roger's(1705-1796) family. Lt. Rogers of Pemaquid, Maine, brought the powder horn and pistols home at the end of the French and Indian War. According to family tradition, they were given to Rogers by a Native American chief at the end of the war. The horn has hung on the wall of Maj. Robert Huston (1774-1858) house in Damarascotta, Maine, for over two centuries. A Thomas Simmons fought in the French and Indian War as a member of the 1st Connecticut Troops commanded by General Lyman, in 12th Company under Captain Spaulding, from April to December of 1761, when he was discharged from service. He later fought with the 8th Connecticut Regiment and died in battle in 1777. A letter from William Dykes on his letterhead is included with the items. Also, a letter from the family that the items were purchased from is included. This is a very well-documented and historic French and Indian War period grouping of items. Barrel Length: 11" Caliber/Bore: .60 Smoothbore FFL Status: Antique Manufacturer: Thiolliere LeJeune Model: Flintlock Officers Pistols Paperwork : Yes Serial Number: NSN
Comprising: A) Fine pair of French flintlock officer's pistols with tapered round steel barrels with partial flat rib on tops, mounted with silver half-moon front sights...more. Flat lockplates engraved with shells at rear tangs and inscribed in centers "Thiolliere/ le Jeune". " Rogers took the pistols from a French officer during the French and Indian War. Solid sterling silver mounts have French hallmarks. Pierced and chiseled sideplates display fine foliate scrolls and serpents at backs, pierced silver wrist escutcheons have crowns over vacant panels with masks below. Triggerguards have relief panels on bows and terminate in acanthus leaf finials. Stirruped buttcaps have portraits of king on one and queen on the other, sides with grotesque masks and scrollwork in high relief. Walnut stocks are profusely carved with relief scrolls and shell designs around entry ferrules and barrel tangs. Complete with period bone-tipped wooden ramrods. CONDITION: Good. Locks and barrels show some wear and retain a light grey freckled patina, some heavier corrosion around toucholes. Locks are in their original flintlock configuration. Silver retains a grey patina, darker in protected areas, a few scattered marks and some light high edge wear. Stocks good with some age cracks and scattered marks, one internal mainspring has pushed the wood and it is bowed slightly. Part of one silver gripcap stirrup has been replaced. A very ornate and attractive pair of pre-French and Indian War period pistols. These pistols are one of only three or four pairs known by this maker. The Thiollere family lived in St. Etienne, France. From the early 1600's, they had a colliery and were advisors to the royal family. The escutcheons on both pistols bear the crest of Hussar Colonel Count Andrassy. B) Powder Horn of Thomas Simons, dated 1762. According to family tradition the powder horn was given to Rogers by a Native American chief. The curved 13" body retains a pleasing dark honey patina and has not been cleaned. The butt is a convex wood plug with a brass knob. The spout has one relief ring and scalloped edge between sections. The horn is lightly carved with scenes of ships at anchor flying the colonial American flag, a 13 stripe flag with a British Union Jack in the canton. Also depicted is a town square with a church and buildings, perhaps colonial Salem, Massachusetts. CONDITION: Very good, showing some light wear from carrying. Strap is associated and is a later addition. This powder horn, along with the pistols, was passed down through Lieutenant Patrick Roger's(1705-1796) family. Lt. Rogers of Pemaquid, Maine, brought the powder horn and pistols home at the end of the French and Indian War. According to family tradition, they were given to Rogers by a Native American chief at the end of the war. The horn has hung on the wall of Maj. Robert Huston (1774-1858) house in Damarascotta, Maine, for over two centuries. A Thomas Simmons fought in the French and Indian War as a member of the 1st Connecticut Troops commanded by General Lyman, in 12th Company under Captain Spaulding, from April to December of 1761, when he was discharged from service. He later fought with the 8th Connecticut Regiment and died in battle in 1777. A letter from William Dykes on his letterhead is included with the items. Also, a letter from the family that the items were purchased from is included. This is a very well-documented and historic French and Indian War period grouping of items. Barrel Length: 11" Caliber/Bore: .60 Smoothbore FFL Status: Antique Manufacturer: Thiolliere LeJeune Model: Flintlock Officers Pistols Paperwork : Yes Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 20,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Documented Cased Pair of Dueling Pistols belonging to President James Madison.

Lot # 323 (Sale Order: 319 of 399)      

This pair of pistols originally belonged to the fourth President of the United States, James Madison. James Madison was in office between March of 1809 and March of 1817. He is considered one of the Founding Fathers of the United States of America. A notarized letter from Routh Smith Crowell accompanies these pistols. Routh is a direct descendant of Francis Madison, brother to President James Madison. She states that the pair of dueling pistols made by A. T. Baxter of Baltimore, Maryland, now in the private collection of William Dykes, was given by President James Madison was given to his favorite nephew, Walton Pembroke Smith. The cased pair of pistols has descended in the Madison-Smith family at Saragossa Plantation near Natchez, Mississippi to the present time. Through the lineage of the pistols, it has been passed on that that they were present (probably as the weapons of the seconds) at the famous Decatur duel. President Madison probably acquired the pistols from Haslett of Baltimore. There are several important pieces of provenance accompanying these pistols, including: A notarized letter on Wm. Dykes Antiques letterhead from Routh Smith Crowell detailing the exact lineage of the pistols and descent through her family; several photographs of Routh and William Dykes with the pistols, taken at the time that she sold the pair to him; A signed description of the pistols and history of them on William Dykes Antiques letterhead; copies of information on maker Arthur T. Baxter and James Madison; photographs of a similar pair by Hazlett of Baltimore; and a large(25" x15") hand inscribed family tree for the Smith family, beginning in 1701 and ending in 1880, showing the lineage of the pistols, probably done around 1880. On the family tree is a written statement regarding the pistols: "President Madison gave to Walton P. Smith a brace of duelling pistols said to have been used in Barron & Decatur duel." These dueling pistols belonged to James Madison and and were said be the ones he strapped on when the British attacked Washington in 1814. Family lore also insists that these pistols were present at the famous duel between Decatur and Barron in 1820. Their stocks, locks, and mountings are nearly identical to a pair made by Haslett of Baltimore in 1805. They are silver mounted with gold inlaid bands at on the hooked patent breeches. They have front and rear sights mounted on top flats. Both have set triggers and were converted from flintlock to percussion sometime after 1830. The inset gold lock escutcheon is marked "A.T. BAXTER, BALT." for Arthur T. Baxter. Baxter was a listed gunsmith in Baltimore, who was known for his high-grade conversions to percussion mechanisms. Many of these conversions were marked by him at the time of conversion, notably a Model 1816 North martial pistol signed with a similar gold escutcheon. He was also a well-known maker of longarms, exclusively, so if he did make these pistols, they would be unique. They were possibly made by Haslett and converted, then marked, by Baxter. President Madison and his wife, Dolly, had no children, but were very close to Madison's brother, Francis, and his family. Francis' daughter, Mary Bell Madison, married William Haslett Smith in 1809 and President Madison gave their son, Walton Pembroke Smith, an appointment to West Point in 1828. It was during this period or shortly before his death in 1836 that Madison presented his dueling pistols Walton. Walton fought in the Mexican War and it is likely that he had these pistols, as they show heavy use. Walton, who died in 1866, passed them down to his son, Austin Williams Smith, who fought in the Civil War. Austin (1843-1911) left the pistols to his son, Davidson Routh Smith (1880-1945) and Davidson passed them on to his daughter, Routh Smith Crowell (1913-2010). Routh gave the pistols to William Dykes, as shown in the photographs and affidavit. The case is constructed of West Indies mahogany with poplar as the secondary wood, as typical for furniture in this region. The silver mounted boar's tusk powder measure was a presentation piece given to Walton from his father-in-law. It is decorated in ink around the opening and inscribed "A. Williams/ To/ W.P. Smith / 1840". It is excellent condition with a pleasing honey patina. CONDITION: The pistols show heavy use, overall. Barrels retain a dark freckled patina, showing edge wear and scattered marks from use. Locks retain a spotted grey patina and have some wear to maker's cartouches, one hammer screw a period replacement. Silver furniture retains a grey patina and shows some wear to engraving. Both triggerguard finials have been replaced, but long ago. Click here to see the full description.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 48,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Fine Relief-Carved Kentucky Flintlock Pistol, Possibly Southern.

Lot # 324 (Sale Order: 320 of 399)      

This fine brass and silver mounted Kentucky pistol features an octagonal iron barrel with front blade sight of German silver and small notched rear sight. Flat lockplate marked in center "T./KETLAND/& Co." and decorated with an engraved single line border. Brass triggerguard features an oval shaped silver overlay engraved with a detailed border, silver wrist escutcheon engraved "en suite". Un-engraved silver buttcap and brass sideplate, ramrod ferrules, and nosecap. Figured maple stock of unusual form, featuring a relief-carved shell behind the barrel tang and relief panels around lock and sideplate, both terminating with an arrow at the back. Complete with original hickory ramrod with iron worm. CONDITION: Very good, barrel and lock retain a spotted grey patina, lock appears to be in original flintlock configuration. Stock has a later coat of finish added and a repaired break at wrist. One piece between lock and barrel tang has been professionally replaced. Otherwise, a beautiful pistol with nice form and a great homogeneous look. The form and the silver overlay on the triggerguard suggest southern origin, as well as the carving around the tang. Barrel Length: 8" Caliber/Bore: .44 Rifled FFL Status: Antique Manufacturer: Unknown Model: Kentucky Pistol Paperwork : No Serial Number: NSN
This fine brass and silver mounted Kentucky pistol features an octagonal iron barrel with front blade sight of German silver and small notched rear sight. Flat lockplate...more marked in center "T./KETLAND/& Co." and decorated with an engraved single line border. Brass triggerguard features an oval shaped silver overlay engraved with a detailed border, silver wrist escutcheon engraved "en suite". Un-engraved silver buttcap and brass sideplate, ramrod ferrules, and nosecap. Figured maple stock of unusual form, featuring a relief-carved shell behind the barrel tang and relief panels around lock and sideplate, both terminating with an arrow at the back. Complete with original hickory ramrod with iron worm. CONDITION: Very good, barrel and lock retain a spotted grey patina, lock appears to be in original flintlock configuration. Stock has a later coat of finish added and a repaired break at wrist. One piece between lock and barrel tang has been professionally replaced. Otherwise, a beautiful pistol with nice form and a great homogeneous look. The form and the silver overlay on the triggerguard suggest southern origin, as well as the carving around the tang. Barrel Length: 8" Caliber/Bore: .44 Rifled FFL Status: Antique Manufacturer: Unknown Model: Kentucky Pistol Paperwork : No Serial Number: NSN

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Volcanic Repeating Arms Co. 16" Pistol Carbine with Case.

Lot # 325 (Sale Order: 321 of 399)      

The Volcanic Repeating Arms Company was only in business for just under two years before being absorbed by the New Haven Arms Company. During this time 50 employees and several contractors built assembled and finished just over 3000 firearms. Of these approximately 300 .41 CAL. pistol carbines were manufactured. This 16 1/2 inch variation serial number 483 with detachable stock and wooden case with wiping rod is one of the rarest of all examples. Blue finished 16 1/2 inch barrel with integral magazine with a capacity of 20 rounds with tapered post front sight and drift adjustable rear sight. Gun metal brass alloy fame with iron ring lever, mounted with two piece American walnut grips. The detachable shoulder stock has a tapered iron insert with two retaining screws. The walnut stock is fitted with a diminutive crescent buttplate. The case measures 24 1/2 X 7 1/2 inches. Velvet lined partitions for the stock and carbine as well as a compartment for ammunition. A contemporary wiping rod is inset in the rear of the case. Case is fitted with period brass hardware. CONDITION. Very fine with barrel retaining over 60% original factory applied blue finish. Address is typically weak struck but is legible. Gun Metal brass alloy frame is very good with numerous small scratches as is to be expected. The grips are very fine with matching serial numbers "483" found on inside of both grips. Grips appear to have had an additional coat of finish applied as some earlier date. Detachable stock is very good as partially refinished. The iron has been cleaned and the wood is very lightly sanded and refinished. No numbers were observed on the stock. The bore is slightly frosted but otherwise bright with strong rifling. The case is excellent with strong solid partitions. Lining is worn from use but appears original. The exterior has been expertly refinished and looks consistent with carbine. Action is crisp and mechanics function properly.TDW Accessories : Cleaning Rod, Stock, Case Barrel Length: 16 - 1/4" Caliber/Bore: .41 RF FFL Status: Antique Manufacturer: Volcanic Repeating Arms Co Model: Volcanic Pistol Carbine Serial Number: 483
The Volcanic Repeating Arms Company was only in business for just under two years before being absorbed by the New Haven Arms Company. During this time 50 employees and s...moreeveral contractors built assembled and finished just over 3000 firearms. Of these approximately 300 .41 CAL. pistol carbines were manufactured. This 16 1/2 inch variation serial number 483 with detachable stock and wooden case with wiping rod is one of the rarest of all examples. Blue finished 16 1/2 inch barrel with integral magazine with a capacity of 20 rounds with tapered post front sight and drift adjustable rear sight. Gun metal brass alloy fame with iron ring lever, mounted with two piece American walnut grips. The detachable shoulder stock has a tapered iron insert with two retaining screws. The walnut stock is fitted with a diminutive crescent buttplate. The case measures 24 1/2 X 7 1/2 inches. Velvet lined partitions for the stock and carbine as well as a compartment for ammunition. A contemporary wiping rod is inset in the rear of the case. Case is fitted with period brass hardware. CONDITION. Very fine with barrel retaining over 60% original factory applied blue finish. Address is typically weak struck but is legible. Gun Metal brass alloy frame is very good with numerous small scratches as is to be expected. The grips are very fine with matching serial numbers "483" found on inside of both grips. Grips appear to have had an additional coat of finish applied as some earlier date. Detachable stock is very good as partially refinished. The iron has been cleaned and the wood is very lightly sanded and refinished. No numbers were observed on the stock. The bore is slightly frosted but otherwise bright with strong rifling. The case is excellent with strong solid partitions. Lining is worn from use but appears original. The exterior has been expertly refinished and looks consistent with carbine. Action is crisp and mechanics function properly.TDW Accessories : Cleaning Rod, Stock, Case Barrel Length: 16 - 1/4" Caliber/Bore: .41 RF FFL Status: Antique Manufacturer: Volcanic Repeating Arms Co Model: Volcanic Pistol Carbine Serial Number: 483

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 21,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Volcanic Repeating Arms Company Lever Action Pistol.

Lot # 326 (Sale Order: 322 of 399)      

This is referred to as a large frame Navy pistol; also referred to as the holster model. The 8" pistol held ten round of the No. 2 Smith & Wesson Volcanic .41 cartridges. Serial number of this gun can be found inside of both sideplates, lever, internal links, inside both grip panels, and inside the frame under grips. Left side of trigger guard is stamped with "H". The placement of the serial numbers and "H" is illustrated on page 56 in the book "Volcanic Firearms" by Lewis and Rutter. Stamped "VOLCANIC REPEATING ARMS CO PATENT NEW HAVEN CONN. FEB. 14 1854". It is a full strike. Differences in barrel stamps can be found on page 58. Single hook extractor; first style ejection port variation, left example page 58; single fixed blade wind drift adjustable rear sight, page 61; brass cone front sight, page 54. Volcanic Company replaced Smith & Wesson in July of 1855 and was reorganized as the new Haven Arms Company in 1857 which indicates this firearm was only available under this name for three years. CONDITION: All steel parts are a dark, deep patina, very smooth with no damage. Brass frame has never been cleaned. Original varnished grips are excellent with some added finish and a few minor bruises. Every screw is slightly marred. Barrel legends and edge are razor sharp. Muzzle is true with no holster wear. Fully operational. Bore is remarkable; razor sharp lands and shiny grooves. This is an exceptionally nice example with the attic-find homogenous look so desired by collectors. Great Volcanic marked Volcanic. Barrel Length: 8" Caliber/Bore: .38 RF FFL Status: Antique Manufacturer: Volcanic Model: Navy Paperwork : No Serial Number: 1657
This is referred to as a large frame Navy pistol; also referred to as the holster model. The 8" pistol held ten round of the No. 2 Smith & Wesson Volcanic .41 cartridges...more. Serial number of this gun can be found inside of both sideplates, lever, internal links, inside both grip panels, and inside the frame under grips. Left side of trigger guard is stamped with "H". The placement of the serial numbers and "H" is illustrated on page 56 in the book "Volcanic Firearms" by Lewis and Rutter. Stamped "VOLCANIC REPEATING ARMS CO PATENT NEW HAVEN CONN. FEB. 14 1854". It is a full strike. Differences in barrel stamps can be found on page 58. Single hook extractor; first style ejection port variation, left example page 58; single fixed blade wind drift adjustable rear sight, page 61; brass cone front sight, page 54. Volcanic Company replaced Smith & Wesson in July of 1855 and was reorganized as the new Haven Arms Company in 1857 which indicates this firearm was only available under this name for three years. CONDITION: All steel parts are a dark, deep patina, very smooth with no damage. Brass frame has never been cleaned. Original varnished grips are excellent with some added finish and a few minor bruises. Every screw is slightly marred. Barrel legends and edge are razor sharp. Muzzle is true with no holster wear. Fully operational. Bore is remarkable; razor sharp lands and shiny grooves. This is an exceptionally nice example with the attic-find homogenous look so desired by collectors. Great Volcanic marked Volcanic. Barrel Length: 8" Caliber/Bore: .38 RF FFL Status: Antique Manufacturer: Volcanic Model: Navy Paperwork : No Serial Number: 1657

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 10,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) Scarce Volcanic Arms 8 inch Navy Holster Pistol

Lot # 327 (Sale Order: 323 of 399)      

Cal. 41. Fine Navy size pistol with 8" oct bbl that has integral magazine and German Silver pin front sight with drift adjustable rear sight in top flat of the receiver. Top flat of the bbl has the 3-line Volcanic Repeating Arms Company address. Mounted with smooth 2-pc walnut grips that are matching numbered to this pistol inside each grip. SN was noted on the right side of the butt strap under the grip, on the lever and inside each grip. Matching SN is also found inside each sideplate and on each link . According to Flayderman’s Guide to Antique American Firearms only about 1,500 of these scarce pistols were produced in the period 1855-1857. Very few are found today in completely orig configuration with any orig finish remaining. CONDITION: Very good overall with barrel having turned a grey mottled patina with additional coverage of light pinprick surface rust; frame & sideplates show little or no damage or wear , with sharp, clean edges and all the brass retains a wonderful dark coffee colored patina. Grips have nicks & dings, show even wear and retain about all of their contemporary varnish. Right grip has a repaired crack and splice that is very well done. Mechanics are fine, strong bright bore with scattered pitting. TDW Barrel Length: 8" Caliber/Bore: .41 RF FFL Status: Antique Manufacturer: Volcanic Arms Model: Pistol Paperwork : No Serial Number: 2161
Cal. 41. Fine Navy size pistol with 8" oct bbl that has integral magazine and German Silver pin front sight with drift adjustable rear sight in top flat of the receiver. ...moreTop flat of the bbl has the 3-line Volcanic Repeating Arms Company address. Mounted with smooth 2-pc walnut grips that are matching numbered to this pistol inside each grip. SN was noted on the right side of the butt strap under the grip, on the lever and inside each grip. Matching SN is also found inside each sideplate and on each link . According to Flayderman’s Guide to Antique American Firearms only about 1,500 of these scarce pistols were produced in the period 1855-1857. Very few are found today in completely orig configuration with any orig finish remaining. CONDITION: Very good overall with barrel having turned a grey mottled patina with additional coverage of light pinprick surface rust; frame & sideplates show little or no damage or wear , with sharp, clean edges and all the brass retains a wonderful dark coffee colored patina. Grips have nicks & dings, show even wear and retain about all of their contemporary varnish. Right grip has a repaired crack and splice that is very well done. Mechanics are fine, strong bright bore with scattered pitting. TDW Barrel Length: 8" Caliber/Bore: .41 RF FFL Status: Antique Manufacturer: Volcanic Arms Model: Pistol Paperwork : No Serial Number: 2161

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

(A) New Haven Arms Volcanic #1 Pocket Pistol

Lot # 328 (Sale Order: 324 of 399)      

Manufactured 1857 through 1860. The Number 1 Volcanic with 3 1/2 octagon barrel and gun metal brass frame. These guns were mounted with two piece American walnut grips and barrels were marked "NEW HAVEN ARMS PATENT FEB14 1854" on the top barrel flat. These revolutionary pistols had a magazine capacity of six rounds of the .31 Cal, #1 Volcanic cartridges. New Haven Arms produced a total of 3370 Rifles , carbines and pistols with a total production of the small frame #1 pocket pistol being estimated at 850. This example is serial numbered 318 on the frame under the left grip and the grips are numbered 318 on their inside flats. A fine tapered post front sight with a drift adjustable rear sight mounted in the rear of the frame top. CONDITION. Good overall with all numbers matching. The barrel assembly is a soft dove grey finish with very light salt and pepper corrosion evident on the flats. The gun metal brass frame is very good and has been slightly polished to bright. The iron ring lever and trigger are bright overall. The action is crisp and functions properly. The bore is slightly frosted with strong rifling.TDW Barrel Length: 3 - 1/2" Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: Volcanic Model: Pocket Pistol Serial Number: 318
Manufactured 1857 through 1860. The Number 1 Volcanic with 3 1/2 octagon barrel and gun metal brass frame. These guns were mounted with two piece American walnut grips an...mored barrels were marked "NEW HAVEN ARMS PATENT FEB14 1854" on the top barrel flat. These revolutionary pistols had a magazine capacity of six rounds of the .31 Cal, #1 Volcanic cartridges. New Haven Arms produced a total of 3370 Rifles , carbines and pistols with a total production of the small frame #1 pocket pistol being estimated at 850. This example is serial numbered 318 on the frame under the left grip and the grips are numbered 318 on their inside flats. A fine tapered post front sight with a drift adjustable rear sight mounted in the rear of the frame top. CONDITION. Good overall with all numbers matching. The barrel assembly is a soft dove grey finish with very light salt and pepper corrosion evident on the flats. The gun metal brass frame is very good and has been slightly polished to bright. The iron ring lever and trigger are bright overall. The action is crisp and functions properly. The bore is slightly frosted with strong rifling.TDW Barrel Length: 3 - 1/2" Caliber/Bore: .31 RF FFL Status: Antique Manufacturer: Volcanic Model: Pocket Pistol Serial Number: 318

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare Original Mahogany Case for Pair of Texas Paterson Revolvers.

Lot # 329 (Sale Order: 325 of 399)      

Extremely rare original display case for a pair of Patersons. A nearly identical can be seen on page 36 in the book titled "Paterson Colt Pistol Variations" but Phillips and Wilson. If you have a pair of the rare Paterson revolvers, this is a perfect display case. Top appears to be relined; bottom is original. Formerly of the Danny Levitt collection and pictured in his book. Includes an original three handled bullet mold with no finish, an original wood handled brass cleaning jag, and a key. Top of box has inset nameplate. One of a less than a half dozen known double cases and probably a once in a lifetime chance to obtain one.
Extremely rare original display case for a pair of Patersons. A nearly identical can be seen on page 36 in the book titled "Paterson Colt Pistol Variations" but Phillips...more and Wilson. If you have a pair of the rare Paterson revolvers, this is a perfect display case. Top appears to be relined; bottom is original. Formerly of the Danny Levitt collection and pictured in his book. Includes an original three handled bullet mold with no finish, an original wood handled brass cleaning jag, and a key. Top of box has inset nameplate. One of a less than a half dozen known double cases and probably a once in a lifetime chance to obtain one.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 13 of 16

1.178.0.1936.cbf978e.15.248