Old Steel Summer Militaria Auction
Auction closed.
Auction closed.
Old Steel Summer Militaria Auction
Auction closed.
Auction closed.
Internet Premium: 18%
See Special Terms for additional fees
See Special Terms for additional fees
Description
Old Steel Historical Firearm's Auction featuring 300 lots of bayonets, flare guns, knives, parts kits, ammunition, helmets, and more!
x Cancel
Closed Lots
Bren Mk 3 Parts Kit .303 British
Complete Bren Mk 3 kit with torch cut receiver and small parts. Barrel is whole with distinct rifling, bore is a little dark and does not reflect light but is free of rust. The receiver is marked 1948. Comes with the original bipod and one 30rd box magazine. The Bren is based on the Czechoslavakian ZB vz 26 machine gun with some slight changes mainly the conversion from 8mm Mauser to .303 British. The Bren in its various versions served with the British from 1938 until the 1990s. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Browning M1919A6 Parts Kit 7.62x51 NATO
Mostly complete and is missing the barrel and the right side plate (which is classified as the receiver for the 1919). Otherwise appears to be complete. Has the 7.62 marked bolt and the U marked top cover. These kits were sent to the Israelis as part of foreign aid, converted by them to 7.62x51mm, and re-imported to the US after they were deemed obsolete. There aren't too many of these kits left out there so don't miss out on your chance to own this one. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Goryunov SG-43 Parts Kit with Night Vision 7.62x54R
Complete kit with a torch cut receiver and a demilled barrel that has been professionally reworked. Rifling and bore are excellent. Includes; the sled mount, night vision, and small parts. This is an extremely interesting historical piece as this model replaced the M1910 Maxim machine gun in the Soviet Army and also saw use by many of the Eastern Bloc countries and can still be found on battlefields today. The night vision optic is a Polish PPN-2 first generation night vision optic developed in the 1960s, comes in a case. Batteries are not included with the N/V optic and we are uncertain of the functionality as we have no way to test it. These are stock photos and are representative of the condition of these kits. Some slight variation in condition can be expected. This lot will have to be shipped freight on a pallet due to its size and weight. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Browning M1919 Incomplete Right Side Plate
14.5 Inches long, 3.875 inches wide, and 0.245 inches thick
Czech VZ 58 Side Folder Kit with Barrel 7.62x39mm
Complete kit minus the receiver and upper hand guard. Comes with the original chrome lined 15.5'' barrel which would classify this as an SBR unless pinned and welded prior to installation. It is your responsibility to know and follow all federal, state, and local laws. Hang guard and pistol grip are composite wood synthetic. These are surplus Czech kits and will have wear, although this one in particular is very clean. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Yugoslavian M53 (MG 42) Parts Kit 8x57 Mauser
This is a mostly complete Yugo M53 parts kit which is a near identical copy of the German MG 42. Does not include a receiver and appears to be missing some small hardware. The barrel shroud is torch cut. Includes all other major components. The bore is dull throughout and needs a good cleaning, rifling is still visible but not sharp. Otherwise the parts are in good surplus condition. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
British STEN MK II Parts Kit
This is a complete STEN Mk II parts kit minus the receiver. Comes with a 7.75 inch barrel with good sharp rifling. Includes the trigger and housing, bolt, stock, rear sight, and magazine well. All the small parts appear to be present but it is possible some are missing or damaged. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Czech SA 26 Parts Kit 7.62x25mm
Missing barrel. Receiver is de-milled. Comes with sling and magazine pouch with five magazines. This is a surplus Czech kit there will be wear but overall condition is good. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
CETME Model C Parts Kit 7.62x51 NATO
Complete kit minus the barrel, receiver, and barrel pin. Comes with one aluminum 20rd magazine, original sling, and one magazine pouch. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the wood and metal can be expected. These are surplus Spanish kits and will have wear to the metal components and the wood furniture but are in overall good condition. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
CETME Model L Parts Kit 5.56 NATO
Complete kit minus the barrel and receiver. Comes with one aluminum 30rd magazine. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. These are surplus Spanish kits and will have wear but are in overall very good condition. The rear sight windage screw may have the tip missing. The factory trunnion remains inside the sheet metal front end. No de-milled barrel or receiver pieces are included. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Galil ARM Parts Kit 5.56x45 NATO
Complete Israeli parts kit minus the receiver, barrel, and bullet guide. This is a surplus military parts kit and has corresponding wear but is in overall very good condition. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
CETME Model C Parts Kit 7.62x51 NATO
Complete kit minus the barrel, receiver, and barrel pin. Comes with one aluminum 20rd magazine, original sling, and one magazine pouch. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the wood and metal can be expected. These are surplus Spanish kits and will have wear to the metal components and the wood furniture but are in overall good condition. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Czech SA 26 Parts Kit 7.62x25mm
Missing barrel. Receiver is de-milled. Comes with sling and magazine pouch with five magazines. This is a surplus Czech kit there will be wear but overall condition is good. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Czech SA 26 Parts Kit 7.62x25mm
Missing barrel. Receiver is de-milled. Comes with sling and magazine pouch with five magazines. This is a surplus Czech kit there will be wear but overall condition is good. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Turkish 8x57mm Mauser WWII
About 200 rounds by weight, all are FMJ. Headstamps run from 1937 to 1940.
Czech SA 26 Parts Kit 7.62x25mm
Missing barrel. Receiver is de-milled. Comes with sling and magazine pouch with five magazines. This is a surplus Czech kit there will be wear but overall condition is good. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
CETME Model L Parts Kit 5.56 NATO
Complete kit minus the barrel and receiver. Comes with one aluminum 30rd magazine. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. These are surplus Spanish kits and will have wear but are in overall very good condition. The rear sight windage screw may have the tip missing. The factory trunnion remains inside the sheet metal front end. No de-milled barrel or receiver pieces are included. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Rare 4.3x45mm Experimental Ammunition
48 Rounds of 4.3x45mm Made in Germany by Dynamit Nobel. This seldom seen round was part of military experimentation with sub .22 caliber high velocity projectiles.
CETME Model C Parts Kit 7.62x51 NATO
Complete kit minus the barrel, receiver, and barrel pin. Comes with one aluminum 20rd magazine, original sling, and one magazine pouch. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the wood and metal can be expected. These are surplus Spanish kits and will have wear to the metal components and the wood furniture but are in overall good condition. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
Galil SAR Parts Kit 5.56x45mm NATO
Complete Israeli parts kit minus the receiver, barrel, and bullet guide. This is a surplus military parts kit and has corresponding wear but is in overall very good condition. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the stock and metal can be expected. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
CETME Model C Parts Kit 7.62x51 NATO
Complete kit minus the barrel, receiver, and barrel pin. Comes with one aluminum 20rd magazine, original sling, and one magazine pouch. These are stock photos and are representative of the condition of these kits. Some slight variation in condition of the wood and metal can be expected. These are surplus Spanish kits and will have wear to the metal components and the wood furniture but are in overall good condition. It is your responsibility to know and follow all federal, state, and local laws. Surplus parts MUST be inspected and tested by a qualified and competent gunsmith or certified armorer before use in a firearm.
