Old Steel Victory M1 Carbine Collection

Old Steel Victory M1 Carbine Collection

Auction closed.
Auction closed.
Old Steel Victory M1 Carbine Collection

Old Steel Victory M1 Carbine Collection

Auction closed.
Auction closed.
Internet Premium: 20.00%
See Special Terms for additional fees
Share:

Description

Come check out the Old Steel Historical Firearm's M1 Victory Carbine Collection Auction! This auction is the collected work of Doug Hendrickson's M1 Carbine historical display. There are rifles and accessories from WWII that were carefully collected a built up over the years. After taking his collection around various gun shows throughout the states and winning a few awards to boot, Mr. Hendrickson has decided to sell his collection as he enters a new chapter in his life. Come on in and have a look, we hope you find something you like. Happy bidding!

*PLEASE REVIEW OUR TERMS AND CONDITIONS, AS WELL AS THE LOT #0 DESCRIPTION BEFORE BIDDING!*

*WE DO NOT PROVIDE ESTIMATES ON SHIPPING TIMES.*

*SHIPPING ON HEAVY OR BULKY ITEMS MAY COST MORE THAN THE ITEMS ITSELF IN SOME CASES!*

*CREDIT CARD PROCESSING FEES AND TAXES WILL BE INCLUDED, AND ARE CALCULATED AND COLLECTED BY PROXIBID'S PAYMENT PROCESSOR.*

FOR ANY QUESTIONS REGARDING OUR AUCTIONS ON PROXIBID OR TO SEND A VALID FFL FOR A FIREARM, PLEASE EMAIL US: AUCTIONS@OLDSTEELGUNS.COM....
Show more
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 7

DO NOT BID - TERMS & CONDITIONS - READ BEFORE BIDDING. DO NOT BID ON THIS LOT!

Lot # 0      

Thank you for participating in our Auction!

This Auction is cross-listed on multiple sites. In cases where the winning bidder is not clear, the final determination of the winning bidder for any item is solely up to Old Steel Historical Firearms.


Before attempting to bid on any items, please ensure the card on file is the one you want to use to pay for the item(s) you are bidding on, is up to date and has the adequate funds to make that payment.

Please read the Payment Instructions, Shipping Instructions and Special Terms for this auction before registering to bid. Registering to bid in this auction is an act of agreement to all instructions and terms attached to this auction.

This is an online auction in which you, the bidder, are determining the price. Consequently, all sales are final. Understand that the final determination of the authenticity and condition of the items listed are up to the participants of the auction. The auction house performs its own due diligence for the purposes of accurate descriptions, but due to the high volume of items there are things that can be missed or overlooked. In person inspection is permitted at our premises during business hours, until 48 hours before the first lot closes in the auction. All items are sold for the purpose of being collection pieces, and should be inspected by a professional before engaging in the original intended use.

If you make a bid in error, need to update your tax exempt status, or are having trouble rendering payment you must contact the auction site.

Payment

You will see two charges for this auction. The first is for the items you have won and hammer fees. The second is for shipping costs. Taxes and processing fees are calculated and collected by the auction site payment processor, not Old Steel Historical Firearms. The buyer is responsible for paying all costs shown on the invoice, including any updates such as shipping costs.

Invoices are sent out on the next business day after the auction has closed. The default card on file will be automatically charged 24 hours after your invoice is sent.

We only accept credit cards and ACH as a form of payment. Please note that ACH transactions take longer to post and may delay the time at which we can ship your order. We do not accept check, money order, wire transfer, cash or pay pal.

Failure to pay within 7 days after the invoice send date will result in forfeiture of any won items and a dispute filed. If you wish to pay for the items to lift the dispute, you must contact Old Steel Historical Firearms during normal business hours within 30 days of the original invoice date to arrange payment. A $100 fee will be added for delinquent payments.

Shipping

The buyer is responsible for shipping costs.

Once your order is processed and a shipping label is created, a request for shipping payment will be sent. We calculate and charge shipping separately in order to keep shipping costs as low as possible for individuals who win our auctions.

Orders containing firearms will not be processed until a valid FFL is sent to auctions@oldsteelguns.com.



Orders containing antiques (MFG before 1898) and black powder guns will not be processed until proper identification (I.E: a driver's license or government issued photo ID) is sent to auctions@oldsteelguns.com.




If proper documentation (Valid FFL to ship to for firearms, Photo ID for antiques) is not provided within 30 days of the auction closing you will be refunded for the item(s) less a 20% restocking fee and they will be relisted. Firearms and Antiques will require an adult signature on delivery, which will be reflected in shipping costs.

WE DO NOT SHIP AMMUNITION INTERNATIONALLY

We appreciate your patience when it comes to shipping times. We are a small team, and are processing orders from multiple auctions as well as other channels, often dealing with hundreds of customer orders. We do not give estimates for shipping times. We will contact you if any further action is needed to process your order.

Local Pickup

We welcome and encourage local pickup if you are in the area. Please contact us at auctions@oldsteelguns.com with a day that you intend to pick up your winnings. If we do not hear from you within 14 days after we send your initial invoice, we will ship your items to the shipping address associated with your account.

Best of luck, and happy bidding!


 
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

DO NOT BID!!!! Doug Hendrickson Victory Carbine Collection

Lot # 1      

Doug, known affectionately as "Doug the Carbine Guy," curated an impressive collection of M1 Carbines, inspired by what he believes was a divine calling by God one morning. Each rifle in his collection represents not only a piece of military history but also a testament to his passion and dedication.

The M1 carbine holds a special place in military history, recognized for its pivotal role during World War II as a lightweight and versatile firearm. Doug's collection not only showcases all 11 manufactures and associated M1 Carbine Accessories, of these rifles there's a few that showcase the soldiers who relied on them like his Paratrooper Carbine that was Carried at D-Day.

Beyond collecting, Doug actively shares his knowledge by traveling the country, attending gun shows, and exhibiting his collection. He has earned awards for his exhibit for educating others and his presentation. 

Doug's collection is more than a hobby; it's a way of preserving and celebrating the past. His dedication ensures that future generations can appreciate the impact of these firearms and military history in general.


...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Irwin-Pederson M1 Carbine - 7-1943 - FFL C&R - BRING BACK

Lot # 2      

Kicking off the auction is a bring back Irwin-Pederson M1 Carbine manufactured in May 1943. This rifle is AS-ISSUED condition. It has an Underwood barrel manufactured in July 1943. The barrel has good rifling and is in mostly great condition with a small spot of light pitting present toward the muzzle. Attached is a sling (C-Tip) and a double magazine pouch made in 1943. The pouch is marked J.S.&S.CO. 1943. Inside the pouch are two additional magazines. Some light surface rust is present in addition to expected patina from age.
Included in this lot are medals and documents from the Commanding Officer Lt. William Pool McCarthy detailing his Landing Craft Support ship (USS LCS (L)(3)-46) and her missions. The awards included are: Asiatic Pacific Campaign ribbon with two campaign stars, Navy Unit Commendation ribbon, Navy Presidential Unit Citation, American Campaign. Two naval Lieutenant rank devices, US Navy pin and VFW pin are also present. The shoulder board ranks are also included.
The following list shows the part types, manufacture codes and markings. These are all original parts.
Receiver - Irwin Pederson
-Rear Sight - Type I - S marked left side - RP marked right side
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - III - IPW
Barrel - Underwood
-UNDERWOOD - 7-43
-Proof Mark - P
-Front Sight - Type I - IP - Marked N on top (faded) and 9 on left
-Gas Piston Nut - N/A
-Piston - N/A
-Barrel Skirt - N/A
Bolt - Type II S'G'
-Firing Pin - Type I - IP
-Extractor - Type III - IP-W
-Extractor Plunger - Type III
-Ejector - Type I
Trigger Housing - Type II - IP
-Trigger - Type II - S'G'
-Sear - Type I - SW-IP
-Hammer - Fatboy - Type II - S'G'
-Hammer Spring/Trigger Housing Pin - N/A
-Safety - Type III - IP-A
-Magazine Catch - Type III - IPW
-Safety/Magazine Catch Plunger - Type I
Operating Slide - Type II - IP
-Operating Slide Stop - Type I
Stock - Type II
-Ordnance Mark - S'G' - Crossed Cannons
-Handguard - Type I Early Handguard
-Barrel Band/Swivel - Type II - UP
-Buttplate - Type I - RM IP 
 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Irwin-Pederson
Model: M1 Carbine
Year: 1943
Serial # - Firearms: 3213972
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to g****4! to YOU!

Placing your bid. please wait...

Saginaw S'G' M1 Carbine - Mfg May 1943 - FFL C&R

Lot # 3      

Up next in this collection is a Saginaw M1 Carbine manufactured in May 1943. The barrel is an Inland barrel made in July 1943. Bore is in excellent condition with smooth grooves and crisp rifling lands. Attached is a sling and double magazine pouch. marked on the pouch is LAIRD SCHOBER 1943. Inside the pouch are two additional magazines with some surface rust present. The stock is a straight high wood version. The following list shows the parts type, manufacture codes or markings. 

Receiver - Saginaw - Type II
-Rear Sight - Type I - S marked left side - B S'G' marked right side
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - III/I - W-S'G'
Barrel - Inland
-INLAND - 7-43
-Proof Mark - P
-Front Sight - Type I - N
-Gas Piston Nut - Type II
-Piston - Type II Unmarked
-Barrel Skirt - Type I
Bolt - Type II S'G' - FLAT
-Firing Pin - Type II - S'G'
-Extractor - Type III - S'G'
-Extractor Plunger - Type II
-Ejector - Type I
Trigger Housing - Type III - S'G'
-Trigger - Type II - V-Notch - S'G'
-Sear - Type I - SW - S'G'
-Hammer - Type III - S'G'
-Hammer Spring/Trigger Housing Pin - Type II - Type II
-Safety - Type III - E-S'G'
-Magazine Catch - Type IIA - IP-W
-Safety/Magazine Catch Plunger - Type I
Operating Slide - Type II - S'G'
-Part Number - B - Flaming Bomb
-Operating Slide Stop - Type I
Stock - Type II
-Ordnance Mark - SC - Crossed Cannons
-Handguard - Type I Early Handguard
-Barrel Band/Swivel - Type IA Unmarked
-Buttplate - Type I - PM IP

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make - Saginaw
Model: M1 Carbine
Year: 1943
Serial # - Firearms: 3248896
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to J****t! to YOU!

Placing your bid. please wait...

Rock-Ola M1 Carbine - 11-1943 - FFL C&R

Lot # 4      

Up for auction is a Rock-Ola made M1 Carbine manufactured in November 1943. The bore is in good condition with crisp rifling lands. Attached are a sling/oiler and a double magazine pouch marked Laird Schober 1943. The finish of the steel and wood is excellent with the stock being a highwood version. The following list shows the part types, manufacture codes and markings. 
Receiver - Rock-Ola - Type II
-Rear Sight - Type II
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III - Rock-Ola
Barrel - Type IIB
-Rock-Ola
-Proof Mark - P
-Front Sight - Type II - RP
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Type II
Bolt - Type III - Rock-Ola - ROUND
-Firing Pin - Type II - Rock-Ola
-Extractor - Type III
-Extractor Plunger - Type II
-Ejector - Type I
Trigger Housing - Type II - Rock-Ola
-Trigger - Type II - Rock-Ola
-Sear - Type III - Unmarked
-Hammer - Type III - KR2
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III Unmarked
-Magazine Catch - Type IIA - BR
-Safety/Magazine Catch Plunger - Type I / Type I
Operating Slide - Type IV - Marked Underside - Rock-Ola
-Operating Slide Stop - Type II
Stock - Type I - RMC
-Ordnance Mark - None
-Contractor Mark - Type I - RMC
-Handguard - Type I - RMC - Early
-Barrel Band/Swivel - Type I - Unmarked
-Buttplate - Early - Rock-Ola


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Standard Products
Model: M1 Carbine
Year: 1943
Serial # - Firearms: 2128637
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to R****g! to YOU!

Placing your bid. please wait...

Standard Products M1 Carbine - 9-1943 - FFL C&R

Lot # 5      

Up for auction is a Standard Products made M1 Carbine manufactured in September 1943. The bore is in good condition with crisp rifling. The finish on the barrel is faded, showing the clean steel below. The receiver and parts show much of its finish in tact. The stock is a highwood version and in great shape. Below is a list of its parts, their type, any manufacturing codes or markings. 
Receiver - Type II - Standard Products
-Rear Sight - Type I - S
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III - Std. Pro.
Barrel - Type I
-UNDERWOOD 12-43
-Proof Mark - P
-Front Sight - Type I - N
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Long Skirt
Bolt - Type II - Blued FLAT - S29
-Firing Pin - Type I - HS
-Extractor - Type III
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type IV - ST
-Trigger - Type II - S-A
-Sear - Type II - SW
-Hammer - Type III - SW
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type II - Unmarked
-Magazine Catch - Type IIA - SW
-Safety/Magazine Catch Plunger - Type I / Type I
Operating Slide - Type IV - Circle S
-Part Number - 76
-Operating Slide Stop - Type III
Stock - Type II - S-HB - Highwood
-Ordnance Mark - No
-Handguard - Type II
-Barrel Band/Swivel - Type IA - Unmarked
-Buttplate - S-53


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Standard Products
Model: M1 Carbine
Year: 1943
Serial # - Firearms: 2128637
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,400.00

You've been outbid  to J****t! to YOU!

Placing your bid. please wait...

Saginaw SG M1 Carbine - May 1943 - FFL C&R

Lot # 6      

Up next is a Saginaw SG M1 Carbine manufactured in May of 1943. Attached is a sling/oiler and double mag pouch. The pouch has 2 spare magazines and is marked on the back with HAV STCH CO 1943. The bore is in great condition with crisp rifling lands. The finish is well intact on the metal. The stock is a highwood version in good condition with a mark of light damaged below the operating slide cut. Below is a list of parts, their type and any manufacturing codes or markings. 
Receiver - IC - Saginaw
-Rear Sight - Type I - S
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III - SG
Barrel
-SAGINAW GENERAL MOTORS
-Proof Mark - P
-Front Sight - Type I
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Type I
Bolt - Type II - SG - FLAT
-Firing Pin - Type III - SG
-Extractor - Type III - SG
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type III - SG
-Trigger - Type II - SG
-Sear - Type II - Unmarked
-Hammer - Type III SG
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III - Unmarked
-Magazine Catch - Type IIA - T/SG
-Safety/Magazine Catch Plunger - Type II / Type I
Operating Slide - Type III - SG
-Operating Slide Stop - Type II
Stock - Type II - RSG
-Ordnance Mark - Crossed Cannons 99CB
-Handguard - Type II - RSG
-Barrel Band/Swivel - Type IA - Unmarked
-Buttplate - Saginaw

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine
Year: 1943
Serial # - Firearms: 3386162
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,700.00

You've been outbid  to R****g! to YOU!

Placing your bid. please wait...

IBM M1 Carbine - January 1944 - FFL C&R

Lot # 7      

Next in line for this auction is an IBM M1 Carbine manufactured in January of 1944. The bore is in good condition with crisp rifling. The finish of the receiver and its parts is in great condition. The barrel shows some light wearing of the finish, having faded slightly in color. The wood is in good condition. The stock is a highwood variant with an early two rivet style top hand guard. Attached to the rifle is a sling/oiler and a double magazine pouch with two additional magazines. The back of the pouch shows G&R CO 143. The following list shows a list of the parts with their type as well as any markings or manufacturer codes. 
Receiver - Type II - IBM Corp.
-Rear Sight - Type III - I.R.Co
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III / Type I
Barrel - No Date - Type I
-IBM Corp
-Proof Mark - P
-Front Sight - Type II - SI B
-Gas Piston Nut - Type II
-Piston - Type I
-Barrel Skirt - Type I
Bolt - Type III - EM-B - ROUND
-Firing Pin - Type II - BE-B
-Extractor - Type III - IB
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type IV - BE B
-Trigger - Type II - SKB
-Sear - Type II - GB
-Hammer - Type III - WMB
-Hammer Spring/Trigger Housing Pin - Type II / Type I
-Safety - Type III - EPB
-Magazine Catch - Type IIA - EPB
-Safety/Magazine Catch Plunger - Type I / Type I
Operating Slide - Type IV - AOB
-Operating Slide Stop - Type II
Stock - Type II - BR-B
-Ordnance Mark - None
-Handguard - Type II BR B
-Barrel Band/Swivel - Type IA - KV-B
-Buttplate - Type I - IBM


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: I.B.M.
Model: M1 Carbine
Year: 1944
Serial # - Firearms: 3884463
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,700.00

You've been outbid  to R****g! to YOU!

Placing your bid. please wait...

Quality Hardware M1 Carbine - June 1943 - FFL C&R

Lot # 8      

Here we have a Quality Hardware made M1 Carbine manufactured in June of 1943. The bore is great with crisp rifling lands. The finish of the wood and metal are in excellent condition. Attached to the rifle is a sling/oiler and a double magazine pouch with two additional magazines. The pouch is marked J.Q.M.D. 1942. The stock is a highwood variant with an early two tivet style top hand guard. The following list shows the parts' type and any markings or manufacturers codes. 

Receiver - Quality Hardware - IB
-Rear Sight - Type I - S / BQ
-Operating Spring Tunnel Housing - Type II - Q
-Recoil Plate/Screw - Type II / Type I - RO-Q
Barrel - IIB - 3-43
-Rock-Ola
-Proof Mark - P
-Front Sight - Type I - J-Q
-Gas Piston Nut - Type I
-Piston - Type I
-Barrel Skirt - Type I
Bolt - Type I - FLAT - EM-Q
-Firing Pin - Type I - NL-Q
-Extractor - Type III - STQ
-Extractor Plunger - Type III
-Ejector - Type I
Trigger Housing - Type II - QNL
-Trigger - Type II - LT-Q
-Sear - Type I - CE-Q
-Hammer - Type II - LTQ
-Hammer Spring/Trigger Housing Pin - Type I / Type II
-Safety - Type II - Unmarked
-Magazine Catch - Type IIA - EP-Q
-Safety/Magazine Catch Plunger - N/A
Operating Slide - Type I - DA-Q
-Operating Slide Stop - Type I
Stock - Type II - Q-RMC - Highwood
-Ordnance Mark - Cross Cannons
-Handguard - Type I - Q-RMC - Early
-Barrel Band/Swivel - Type I - QU
-Buttplate - Type I - Quality Hardware


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine
Year: 1943
Serial # - Firearms: 1563267
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to R****g! to YOU!

Placing your bid. please wait...

Underwood M1 Carbine - February 1944 - FFL C&R

Lot # 9      

Next up is an Underwood M1 Carbine made in February of 1944. The bore is in good condition with the muzzle end of the bore showing very light, superficial, surface pitting. The metal finish is good with the receiver showing a light handsome patina and some edge wear. The wood is in good condition and i a low wood variant with an early two rivet top hand guard. The rifle bears a sling/oiler and a double magazine pouch with two additional magazines. The pouch is marked FROEHLICH CO. 1943 on the back. Below is a list of the parts' type and any maarkings or assciated manufacturing codes. 

Receiver - Type II - UNDERWOOD
-Rear Sight - Type I - S
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type II / Type I
Barrel - Type I - 7-43
-UNDERWOOD
-Proof Mark - P
-Front Sight - Type I
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Type II
Bolt - Type II - FLAT
-Firing Pin - Type I
-Extractor - Type III
-Extractor Plunger - Type II
-Ejector - Type I
Trigger Housing - Type III
-Trigger - Type II
-Sear - Type I
-Hammer - Type II
-Hammer Spring/Trigger Housing Pin - Type I / Type II
-Safety - Type II - Unmarked
-Magazine Catch - Type IIA
-Safety/Magazine Catch Plunger - Type I / Type I
Operating Slide - Type II
-Operating Slide Stop - Type II
Stock - Type III
-Ordnance Mark - B - Crossed Cannons - G.W.D.
-Handguard - Type II -
-Barrel Band/Swivel - Type IA

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Underwood
Model: M1 Carbine
Year: 1944
Serial # - Firearms: 4031535
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,400.00

You've been outbid  to r****9! to YOU!

Placing your bid. please wait...

National Postal Meter M1 Carbine - January 1943 - FFL C&R

Lot # 10      

For this M1 Carbine, we have a National Postal Meter manufactured in January of 1943. Attached to the rifle we have an oiler/sling and a double magazine pouch with two additional magazines. The bore shows nice crisp rifling and clean grooves. The stock is a highwood variant with an early two rivet top hand guard. The finish of the metal is in great condition. The wood is in good condition with some light marring on the sides. The following list shows the parts' type and any markings or manufacturing codes.

Receiver - Type II - National Postal Meter
-Rear Sight - Type I - S
-Operating Spring Tunnel Housing - Type I
-Recoil Plate/Screw - Type I / Type I
Barrel - Type I - 9-43
-UNDERWOOD
-Proof Mark - P
-Front Sight - Type I - NN
-Gas Piston Nut - Type II
-Piston - Type I - Unmarked
-Barrel Skirt - Type I
Bolt - Type I - FLAT - N9
-Firing Pin - Type I - WN
-Extractor - Type III - IN
-Extractor Plunger - Type III
-Ejector - Type I
Trigger Housing - Type II - N (9)
-Trigger - Type II - SN
-Sear - Type I - LN
-Hammer - Type II - HI
-Hammer Spring/Trigger Housing Pin - Type I / Type II
-Safety - Type II - IN
-Magazine Catch - Type - IIA - MN
-Safety/Magazine Catch Plunger - I
Operating Slide - Type II - N
-Part Number - II - 15
-Operating Slide Stop - Type I
Stock - Type I -
-Ordnance Mark - Brass Cannons
-Contractors Mark - NDM FSA
-Handguard - Type II - TN
-Barrel Band/Swivel - Type IA - Unmarked
-Buttplate - Type NPM

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: National Postage Meter
Model: M1 Carbine
Year: 1943
Serial # - Firearms: 1508368
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to t****5! to YOU!

Placing your bid. please wait...

Winchester M1 Carbine - February 1944 - FFL C&R

Lot # 11      

Here we have a Winchester M1 Carbine manufactured in February 1944. The rifle has an attached sling/oiler and double magazine pouch with two additional magazines. The pouch is marked BB INC 1943. The finish of the metal is good with wearing showing on the bolt area. The stock's finish is in great condition and is a low wood variant with a late four rivet top hand guard. The following list lays out the parts' type and any markings or manufacturer codes. 

Receiver - Type II - Winchester
-Rear Sight - Type IV
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III - W
Barrel - Type I - W
-WINCHESTER
-Proof Mark - P
-Front Sight - Type III
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Type II
Bolt - Type III - W - ROUND
-Firing Pin - Type III - W
-Extractor - Type - II - W
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type V - W
-Trigger - Type II - W
-Sear - Type II - W
-Hammer - Type III - W
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III - Unmarked
-Magazine Catch - Type III - W
-Safety/Magazine Catch Plunger - Type II / Type II
Operating Slide - Type IV - W
-Part Number - 7160091 - W
-Operating Slide Stop - Type III
Stock - Type III - W
-Ordnance Mark - Crossed Cannons
-Handguard - Type III - W
-Barrel Band/Swivel - Type II - No Mark
-Buttplate - Late - W


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Winchester
Model: M1 Carbine
Year: 1944
Serial # - Firearms: 5734643
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to d****2! to YOU!

Placing your bid. please wait...

Inland Manufacturing Div. M1 Carbine - January 1944 - FFL C&R

Lot # 12      

Up for auction next is an Inland Division M1 Carbine manufactured in January of 1944. The bore is in great condition with crisp rifling. The metal finish is also in great condition. The stock is a low wood variant with late four rivet top hand guard. The finish of the stock is good. Attached is a sling/oiler and double magazine pouch with two additional magazines. The pouch is marked J.Q.M.D 1942. Below is a list showing the parts' type and any markings or manufacturing codes. 
Receiver - INLAND - Type II
-Rear Sight - Type II
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III / Type I - WI
Barrel - IIB - 5-44
-INLAND MFG DIV / GM
-Proof Mark - P
-Front Sight - Type I - R
-Gas Piston Nut - Type II
-Piston - Type I
-Barrel Skirt - Type II
Bolt - Type III - AI - ROUND
-Firing Pin - Type II - NI
-Extractor - Type III - WI
-Extractor Plunger - Type III
-Ejector - Type II
Trigger Housing - Type III - INLAND
-Trigger - Type II - RI
-Sear - Type II - BI or B1
-Hammer - Type III
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III - Unmarked
-Magazine Catch - Type III - WI
-Safety/Magazine Catch Plunger - II
Operating Slide - Type V
-Operating Slide Stop - Type II
Stock - Type III - Low wood
-Ordnance Mark - Cross Cannons
-Handguard - Type III
-Barrel Band/Swivel - Type II
-Buttplate - Type I - Inland

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Inland Manufacturing
Model: M1 Carbine
Year: 1944
Serial # - Firearms: 5214156
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,100.00

You've been outbid  to T****7! to YOU!

Placing your bid. please wait...

Inland M1 Carbine - M-3 Infrared Sniper Scope and Accessories Display - January 1944 - FFL C&R

Lot # 13      

Here we have a doozy of a lot, an Inland M1 Carbine made in January of 1944. This rifle has an M-3 sniper night scope attached with battery pack and a few other accessories including a storage box for the scope. The muzzle has a flash hider affixed as well. The battery is a 20000 volt sulfuric battery ina carrying case. 
Included accessories are:
TM 5-9342 Operation and Maintenance Instruction Manual
Battery Charging Adapter Cable with box, dated 8-31-1950
Spare 30 watt lamp
BNC Connector
Battery Charging Cable for Field Use
M-13 Spare Parts Roll made by Anchor Canvas Product Corporation marked with 1944 and a flaming bomb. 
Demonstration photos and diagrams
The case has 17 different storage slots with a loading plan data plate mounted to the underside of the lid. Inside the case is a TM 5-9342 operation and maintenance instruction manual for the scope. 

Below is a parts list with their type and any manufacturing codes or markings
Receiver - INLAND - Type IIB
-Rear Sight - None
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III - WI
Barrel - IIB - 2-44
-INLAND
-Proof Mark - P
-Front Sight - Type I - H
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Type I
Bolt - Type II - AI - ROUND
-Firing Pin - Type II - R - I
-Extractor - Type III - WI
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type III - INLAND
-Trigger - Type II - F.I.
-Sear - Type II - R.I.
-Hammer - Type III - HI
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III - Unmarked
-Magazine Catch - Type III - EI
-Safety/Magazine Catch Plunger - Type I
Operating Slide - Type V - P.I.
-Part Number - 7160099
-Operating Slide Stop - Type II
Stock - Type III
-Ordnance Mark - None
-Handguard - Type III - Late
-Barrel Band/Swivel - Type II
-Buttplate - Type I INLAND

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Inland Manufacturing
Model: M1 Carbine
Year: 1944
Serial # - Firearms: 4958342
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to f****3! to YOU!

Placing your bid. please wait...

WWII Arisaka Type 99 - 7.7 JAP - Mum - FFL C&R

Lot # 14      

For this lot we have a change up from M1 Carbines to a WWII Japanese Arisaka Type 99 in 7.7 Japanese. The bore shows some light wear to the rifling edges but is in otherwise good condition. The Mum is intact on the receiver. The wood shows some surface wear with the forend showing what appears to be a repaired crack. There is wear to finish and the metal bears a handsome patina. 

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Arisaka
Model: Type 99
Serial # - Firearms: 764141
Caliber: 7.7 Japanese

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 375.00

You've been outbid  to 1****r! to YOU!

Placing your bid. please wait...

WWII Mauser K98k - bcd - 8mm Mauser - FFL C&R

Lot # 15      

Offered is a WWII German Mauser K98k rifle in 8mm Mauser. The bore is in good condition with crisp rifling. The finish of the metal shows some fading. The receiver is 'bcd' marked on the front ring. Their is a German eagle marking on the barrel's shank on the left side. The wood shows some expected light surface wear and is in overall great condition. 

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Mauser
Model: K98K
Serial # - Firearms: 5490
Caliber: 8mm Mauser

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 850.00

You've been outbid  to m****2! to YOU!

Placing your bid. please wait...

RARE Underwood to Winchester M1 Carbine - 1943 - Grenade Launcher Muzzle Device - FFL C&R

Lot # 16      

For this lot we have an Underwood M1 Carbine made in 1943. This was part of a lot of finished and unfinished receivers that Underwood sent to Winchester to finish after ceasing production. The Underwood marking is still intact, unlike MOST of these where Underwood would have been lined out or ground off. Attached is a grenade launcher muzzle device, sling(C-Tip)/oiler, and double magazine pouch with two spare magazines. The pouch is marked G&R CO 1943. The finish of the wood and metal are in good condition. The stock is a rare late Dec 1944 low wood style and the top hand guard a four rivet late style. Below is a list of the parts' type and any markings or manufacturing codes.

Receiver - UNDERWOOD - Type II
-Rear Sight - Type II - H in Shield
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III - Type II - W
Barrel - Type I - W
-Winchester
-Proof Mark - P
-Front Sight - Type I - Unmarked
-Gas Piston Nut - Type II
-Piston - Type I
-Barrel Skirt - Type II
Bolt - Type II - W - FLAT
-Firing Pin - Type I - W
-Extractor - Type III - W
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type VI - W - Late
-Trigger - Type II - IN W. W
-Sear - Type I - W
-Hammer - Type III - W
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III - EW
-Magazine Catch - Type III - W
-Safety/Magazine Catch Plunger - Type II
Operating Slide - Type V- W - Late
-Part Number - Letter - J*
-Operating Slide Stop - Type II
Stock - Type III - W
-Ordnance Mark - Cross Cannons
-Contractor Mark - N/A
-Handguard - Type III - W
-Barrel Band/Swivel - Type III - Unmarked
-Buttplate - Type I - Winchester


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Underwood
Model: M1 Carbine
Year: 1943
Serial # - Firearms: 2907111
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,700.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Saginaw S'G' M1 Carbine - 1943 - FFL C&R

Lot # 17      

Up next is a Saginaw M1 Carbine made in 1943. The bore is in good condition as is the metal's exterior finish with expected light wear around moving parts. The stock is in good condition with a two rivet style top[ hand guard. Attached is a sling/oiler and double magazine pouch containing two spare magazines. The back of the pouch is marked DM SHOE CO 1943. Below is a list of the parts' type and any markings/manufacturing codes. 
Receiver - IIB - Saginaw S'G'
-Rear Sight - Type I - B - S'G'
-Operating Spring Tunnel Housing - N/A
-Recoil Plate/Screw - Type III / Type I - W - S'G'
Barrel - Type I - 1-44
-UNDERWOOD
-Proof Mark - P
-Front Sight - Type III - RIA
-Gas Piston Nut - Type II
-Piston - Type II
-Barrel Skirt - Type I
Bolt - Type II - S'G' - FLAT
-Firing Pin - Type III
-Extractor - Type III
-Extractor Plunger - Type II
-Ejector - Type II
Trigger Housing - Type III - S'G'
-Trigger - Type II - S'G'
-Sear - Type I - S'G'
-Hammer - Type III - S'G'
-Hammer Spring/Trigger Housing Pin - Type II / Type II
-Safety - Type III - E-S'G'
-Magazine Catch - Type IIA - IP-W
-Safety/Magazine Catch Plunger - II
Operating Slide - Type III - S'G'
Stock - Type III - RSG
-Ordnance Mark - None
-Handguard - Type II - RSG - 2 rivet Early
-Barrel Band/Swivel - Type I-A
-Buttplate - Type I

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine
Year: 1943
Serial # - Firearms: 3240320
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to d****t! to YOU!

Placing your bid. please wait...

Inland M1 Carbine - 1944 - C&R FFL

Lot # 18      

Offered is an Inland M1 Carbine made in 1944. The bore is in good condition. The metal's finish is good with spots of expected wear around moving parts. The stock is a low wood style with crossed cannons on the buckstock and 4 rivet late era top handguard. 

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Inland Manufacturing
Model: M1 Carbine
Year: 1944
Serial # - Firearms: 5449045
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,100.00

You've been outbid  to t****y! to YOU!

Placing your bid. please wait...

Inland Paratrooper M1A1 Carbine With Grenade Launcher Attachment - May 1942 - C&R FFL

Lot # 19      

For this lot we have an Inland M1A1 paratrooper carbine with a folding stock, grenade launcher muzzle device, grenade sights, carrying case and different patches from the Airborne units. The parts are original. The metal finish is in good condition with some wear on the receiver from moving parts. The stock is in good condition bearing light wear marks in the form of some dings. There is a sling attached as well as a double magazine pouch with two spare magazines. The carrying case is an ATLAS AWNING from 1944. The case is in excellent condition. The patches included are from the 82nd ABN DIV, 101st ABN DIV, 13th ABN DIV, 11th ABN DIV and the 17th ABN DIV. Below is a list of the parts' type and any manufacturing codes/markings. 

Receiver - INLAND
-Rear Sight - Type I - S / IN
-Operating Spring Tunnel Housing - Type II

Barrel - Type II
-INLAND
-Proof Mark - P
-Front Sight - Type I - N
-Gas Piston Nut - Type I
-Piston - Type I - P.I.

Bolt - Type I - FLAT
-Firing Pin - Type I
-Extractor - Type III - W.I.
-Extractor Plunger - Type III
-Ejector - Type III
Trigger Housing - Type II - INLAND
-Trigger - Type II
-Sear - R.I.
-Hammer - Type II - HI
-Hammer Spring/Trigger Housing Pin - Type I /Type II
-Safety - Type II - Plain
-Magazine Catch - Type II - EI
-Safety/Magazine Catch Plunger - I
Operating Slide - Type II - Pi

Stock - Type Paratrooper - ID
-Ordnance Mark - Crossed Cannons
-Handguard - Type I - IO / B
-Barrel Band/Swivel - Type I - UI
-Buttplate - B257614


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Make: Inland Manufacturing
Model: M1 Carbine Paratrooper
Year: 1942
Serial # - Firearms: 362084
Caliber: 30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,250.00

You've been outbid  to d****t! to YOU!

Placing your bid. please wait...

New in the Wrapper M1 Magazines and 2 Winchester Test Rounds (Rare)

Lot # 20      

For this lot we have a display with 3 original M1 Carbine magazines still in the wrapper with two rounds of Winchester test rounds. One pack is Union Hardware Company. The next pack is The Standard Products Company. The third pack is a Rock-Ola Manufacturing Co. made magazine. In the center of the display are the two Winchester test cartridges. 

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine
Caliber: .30 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 125.00

You've been outbid  to B****6! to YOU!

Placing your bid. please wait...

M1 Carbine Rifle Stock

Lot # 21      

For this lot we have an M1 Carbine rifle stock. The stock is a low wood version with an early two rivet style top hand guard. The butt is marked with crossed cannons and S'G'. The grip shows a P proof mark. A small crack is visible, stemming about an in from the rear tang inlet. 

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 175.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Historical Data Proving Ground History of M1 Carbine Addenda to Volume II Document

Lot # 22      

Here we have a 1944 document "Historical Data, Aberdeen Proving Ground, MD. Proving Ground History of the Carbine Caliber .30, M1" by G.P. Grant, Major Ordnance Department. Alongside this item is a "Know Your Weapons" information card of How the M1 Carbine Works.

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine
Year: 1944

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 70.00

You've been outbid  to z****o! to YOU!

Placing your bid. please wait...

LIFE Magazine Oct 25, 1943 - The American Rifleman Nov 1941 - Popular Mechanics Dec 1943 Magazines

Lot # 23      

Offered are two magazines: LIFE issue October 25th 1943, The American Rifleman 1941 and Popular Mechanics Dec 1943. 

 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

Model: M1 Carbine
Year - Range: 1941-1943

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 20.00

You've been outbid  to d****t! to YOU!

Placing your bid. please wait...

3 Original Boxes for M1 Carbine Parts

Lot # 24      

This lot contains some original packaging for various M1 Carbine parts. All boxes are empty, and feature original labeling.
- One box is for 10 M1 Carbine Magazines of unknown manufacture
- One box formerly contained a M1 trigger housing from Inland Manufacturing
- The last box was for an M1 Carbine grenade launcher from the US Cabinet Bed Co.


 
THIS ITEM IS AS PICTURED WITH NO FURTHER ATTACHMENTS. ALL SALES ARE FINAL. PLEASE REFER TO THE AUCTION DESCRIPTION, LOT #0 DESCRIPTION AND TERMS OF SALE BEFORE BIDDING.
 
GOOD LUCK BIDDING, WE HOPE YOU FIND THE ITEM YOU ARE LOOKING FOR!

...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 20.00

You've been outbid  to B****t! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 7

1.178.0.1774.cf7307d.14.254