Premiere Firearms Auction - Day 1

Premiere Firearms Auction - Day 1

Friday, December 6, 2013  |  9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 1

Premiere Firearms Auction - Day 1

Friday, December 6, 2013  |  9:00 AM Central
Auction closed.
Internet Premium: 20.5%
See Special Terms for additional fees
Cash Payment Discount: 2.5%
Share:

Description

2,600+ Lots! Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 5 of 37

Documented U.S. Smith & Wesson First Model Schofield Single Action Revolver

Lot # 102 (Sale Order: 101 of 920)      

Documented U.S. Smith & Wesson First Model Schofield Single Action Revolver

Manufactured for the U.S. military circa 1875 with a total production of approximately 3,035. The revolver is marked with the two line address/patent dates on the left side of the ejector housing flanked by elongated Maltese crosses. The right side of the ejector housing is marked "+SCHOFIELD'S PAT. APR. 22D 1873+". The butt is marked "U.S." on the toe along with the serial number "1425". The rear cylinder face is stamped with the matching serial number and Ordnance sub-inspector's "L" and "P", which are also marked on the bottom flat of the ejector housing. The grips are smooth walnut with no visible cartouche and the matching serial number stamped on the inside of the right panel. Many Schofield revolvers were issued to the 4th Cavalry which saw service in the "Geronimo Campaign" and the famous 9th and 10th U.S. Cavalry comprised of the "Buffalo Soldiers" stationed in the American Southwest. The revolver is identified as a U.S. Schofield by serial number in the STANDARD CATALOG OF SMITH & WESSON on page 92.

Good. Traces of original blue finish remain in the protected areas with a smooth mottled brown-gray patina on the balance. There is some very scattered minor pitting and the cylinder shows some cleaning. The grips are good with a minor chip missing near the bottom which has a hair line crack (left panel) and there are some minor handling marks. Action needs work.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce and Excellent Smith & Wesson Model 320 Revolving Rifle with Rare 20 Inch Barrel Stock Case an

Lot # 103 (Sale Order: 102 of 920)      

Scarce and Excellent Smith & Wesson Model 320 Revolving Rifle with Rare 20 Inch Barrel Stock Case and Factory Letter

Manufactured from 1879 to 1887, the Model 320 revolving rifle is one of the rarest Smith & Wesson firearms manufactured produced with a total production of 977. These firearms were serialized from 1 to 977 and out of the 977 manufactured, 224 had the 20 inch barrel. The Model 320 was manufactured in three barrel lengths of 16, 18, and 20 inches with twenty being the rarest length, only 224 were manufactured by Smith & Wesson. The included Smith & Wesson factory letter confirms the 20 inch barrel, blue finish and checkered red and black mottled hard rubber grips and forearm. The firearm was shipped from the factory on January 13, 1881 and delivered to G.W. Turner & Ross, Boston, MA. This shipment was for one revolving rifle and 100 cartridges. G.W. Turner & Ross was a small Smith & Wesson dealer and only purchased small quantities at one time. They specialized in selling Smith & Wesson loading tools. The 20 inch barrel has a blade front sight and two leaf folding rear sight. The top of the barrel rib is marked with the two line address/patent dates. The matching serial number appears on the butt, cylinder, barrel and barrel latch. Blue finish with casehardened trigger guard and hammer. The barrel is fitted with a checkered hard rubber red mottled forearm with the Smith & Wesson monogram on the underside. The grips are matching with Smith & Wesson monograms in a circle at the tops. The stock is smooth Circassian walnut with blue finished attaching iron and a checkered hard rubber buttplate with Smith & Wesson monogram. The original hard leather case has double leather straps, a leather handle and brass corner protectors. The case is lined and there are three compartments (one for the rifle, one for the stock and one for a box of cartridges). Also with the revolving rifle is a wooden cleaning rod, a stock peep sight and a box of .32 caliber Smith & Wesson revolving rifle cartridges (50/50). Provenance: Warren Tom Lewis, Dr. Dan Anderson collection.

Excellent plus, the finest we have cataloged. The revolver retains nearly 95% original high polished blue finish with isolated high point edge wear. 60% of the vivid original case colors remain on the hammer and trigger guard. The forearm and grips are also excellent with overall crisp checkering. Mechanically excellent. The stock is excellent with some minor handling marks and the attaching iron retaining 95% plus original blue finish. The case is good with the exterior showing wear and handling/storage marks and the lining shows some wear with heavily worn area from the rear sight. Without question the finest 20 inch Smith & Wesson 320 we have ever encountered and an investment quality firearm of the highest order!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 35,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Smith & Wesson New Model 3 Single Action Revolver with Scarce Shoulder Stock

Lot # 104 (Sale Order: 103 of 920)      

Smith & Wesson New Model 3 Single Action Revolver with Scarce Shoulder Stock

Manufactured from 1878 to 1908 with this revolver manufactured sometime before 1886. The revolver falls into the Australian serial number range, however has the 6 1/2" barrel rather than the 7" found on the Australians. The top of the barrel rib is marked with the two line address/patent and reissue dates and the matching serial number is marked on the butt, rear face of the cylinder and on the barrel latch. Pinned blade front and notch rear sights, all nickel finish with casehardened hammer and trigger, and fitted with checkered hard rubber grips with S&W logos at the tops. Comes with an un-numbered walnut stock with nickel plated attaching iron and black checkered S&W buttplate.

Factory refinished (marked "RN" in rectangle box and "371"under the grip) with over 95% of the factory nickel finish, showing some flaking on the back strap, which now has a smooth gray patina, and minor scuffs and scratches overall. Overall there are some minor dings and scratches. The grips are a bit sun faded and remain excellent with some minor dings and bruises, and crisp checkering. The markings are clear and crisp. The action is excellent. The stock is excellent overall with some light oxidation on the attaching iron and a few minor dings on the toe.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

San Francisco Police U.S. Contract Smith & Wesson Model Three Second Model Schofield Single Action R

Lot # 105 (Sale Order: 104 of 920)      

San Francisco Police U.S. Contract Smith & Wesson Model Three Second Model Schofield Single Action Revolver with Factory Letter

Smith & Wesson Second Model Schofield Single Action Revolver manufactured in 1877 with the San Francisco Police number "268" on top of the back strap. This revolver is one of approximately 300 Schofields that were issued from the Benicia Arsenal to the San Francisco Committee of Safety during the labor riots and civil unrest of 1877-78. The riots and unrest were a result of the great railroad strikes of 1877 that sprung up in many large cities across the United States. Records do exist of these 300 revolvers being issued however, no records exist of them being returned and it is popular belief that once the riots were put down all the revolvers were obtained by the California militia. The two line address/patent dates is marked on the left side of the ejector housing flanked by elongated Maltese crosses. The right side of the ejector housing is marked "+SCHOFIELD'S PATS JUNE 20th 71 APR 22nd 78+". The butt is marked "U.S." on the heel along with the serial number "777". The rear cylinder face is stamped with the matching serial and Ordnance sub-inspector's "E" and "P", which are also marked on the bottom flat of the ejector housing. Fitted with smooth walnut grips with a clear oval Ordnance inspector's script initials cartouche under the date "1877" on the left side and "CW" on the right side. The matching serial number is stamped on the inside of the right panel. The accompanying factory letter verifies the caliber, barrel length, blue finish, walnut grips and that it was shipped to the United States Government, National Armory in Springfield, Ma. On April 11, 1877. Many Schofield revolvers were issued to the 4th Cavalry which saw service in the "Geronimo Campaign" and the famous 9th and 10th U.S. Cavalry comprised of the "Buffalo Soldiers" stationed in the American Southwest. People such as the James Brothers, Cole Younger, U.S. Marshall Bill Tilghman and the Chief Scout for Custer, "Lonesome Charley" Reynolds were known to carry a Schofield revolver. Smith & Wesson manufactured 5,285 Second Model Schofield revolvers under government contract.

Fine. The revolver retains 40% original blue finish, mainly on the frame and cylinder with a smooth cleaned gray and brown patina on the barrel. The grips are also fine with scattered minor dent, dings and scratches. The date and cartouches are clear. The markings are crisp and clear. The action is fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare and Excellent Factory Documented 1893 Chicago World's Fair Exposition Engraved Two-Tone Smith &

Lot # 106 (Sale Order: 105 of 920)      

Rare and Excellent Factory Documented 1893 Chicago World's Fair Exposition Engraved Two-Tone Smith & Wesson 38 Safety Hammerless Third Model Double Action Revolver with Pearl Grips and Factory Letter

The included Smith & Wesson factory letter confirms that this revolver, serial number 68303, was "offered [by Smith & Wesson] for sale at the 1893 Columbian Exposition in Chicago, but did not sell and was sold after the close of the World's Fair." Although held in 1893, the Chicago World's Fair celebrated the 400th anniversary of Christopher Columbus's landing in America (1492) and became a symbol of American exceptionalism that was sweeping the nation. Larger and grander than other world's fairs of the past, the six month running fair was attended by more than 27 million people and showed the world that Chicago had risen from the ashes of the Great Chicago Fire of 1871. At the fair Smith & Wesson exhibited spectacular decorated handguns, including those manufactured in conjunction with Tiffany & Co. The exhibition engraving on the revolver is indicative of the rich quality and style of scrollwork offered by Smith & Wesson. The engraving is done in the hand of one of the Young family members, arguably the greatest family dynasty in the 19th century American engraving: Gustave, Oscar or Eugene. The factory letter also confirms the 4 inch barrel, factory engraving, nickel and gold finish and pearl grips and that the revolver was shipped from the S&W factory on January 15, 1894 to Hartley & Graham Co., New York City. The top of the barrel rib has the two line address/patent marking. The scroll and dot exposition engraving is featured on the barrel sides, frame sides, top strap, top rear of the frame and back strap to extend to the butt surrounding the serial number. It features a half moon front sight, notch rear sight ahead of the latch, checkered back strap grip safety and 5-round auto ejecting cylinder. Nickel with gold finished cylinder, blue trigger guard and casehardened trigger and fitted with pearl grips.

Very fine. The revolver retains 90% plus original nickel finish and 30% original gold finish with a smooth gray patina on the balance. Some pin point pitting is present on the cylinder. The trigger guard retains traces of original blue finish and the trigger has faded to a gray. The grips are very fine with a few minor pressure dents and some minor scratches. The pearl has a very attractive color. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to f****r! to YOU!

Placing your bid. please wait...

Excellent Factory Engraved Smith & Wesson 38 Double Action 3rd Model Revolver with Pearl Grips

Lot # 107 (Sale Order: 106 of 920)      

Excellent Factory Engraved Smith & Wesson 38 Double Action 3rd Model Revolver with Pearl Grips

Manufactured circa 1884 to 1895 with this example having a fine factory scroll and punch dot engraving, possibly by the Nimschke shop. The top of the barrel rib is stamped with the two line address/patent dates. The engraved scrollwork is featured on the sides of the barrel, barrel lug and frame. A fancy zig-zag line and dot engraving is featured on the top strap and around the hammer to extend down the upper portion of the back strap. Nickel plated with casehardened hammer and trigger, blue trigger guard and fitted with pearl grips.

Excellent. The revolver retains 95% original nickel finish showing some minor edge wear and some mild flaking. The hammer and trigger retain strong traces of original case colors and the trigger guard retains 70% original blue finish. The grips are very fine with some chipping on the bottom and a repaired chip at the top of the right panel. The pearl has a very attractive color. The engraving is crisp. Mechanically fine. An excellent and affordable investment quality Smith & Wesson revolver.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine Rare Bayonet Latch Smith & Wesson Model 1 First Issue 2nd Type Revolver

Lot # 108 (Sale Order: 107 of 920)      

Fine Rare Bayonet Latch Smith & Wesson Model 1 First Issue 2nd Type Revolver

Manufactured circa 1857-1860, this revolver has the scarce "bayonet" style barrel latch found only on the Model 1 1st Issue, 1st and 2nd Type revolvers. Smith & Wesson only manufactured approximately 900 of these Model 1, 1st Issue, 2nd Type revolvers. The top of the barrel rib is marked with the one line address and the patent dates are marked around the cylinder. The matching serial number is marked on the butt, front face of the cylinder, back of the barrel lug and stamped inside each grip panel. Blade front and notch rear sights, silver plated brass frame with blue remaining parts and fitted with smooth rosewood grips.

Fine plus. The barrel shows a dark patina with some pitting and oxidation, and strong original blue finish in sheltered areas and ahead of the cylinder. The cylinder retains 50% original blue finish with a dark patina, pitting and some oxidation on the balance. The frame retains 98% original and handsome age darkened silver plating. The hammer spur is absent. The grips are fair overall with a large piece absent on the left panel, otherwise almost all of the original varnish remains and there are a few minor dings and scratches. The markings are clear. With a small investment this rare and highly desirable revolver would rank in the top 10% of known bayonet latch tip-ups.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Outstanding Smith & Wesson 38 Single Action 2nd Model Revolver with Factory Box

Lot # 109 (Sale Order: 108 of 920)      

Outstanding Smith & Wesson 38 Single Action 2nd Model Revolver with Factory Box

Manufactured from 1877 to 1891. The top of the barrel rib is marked with the two line address/patent dates. The matching serial number appears on the butt, cylinder, latch and barrel. Pinned front sight and notch rear sight on the latch. Nickel finish with casehardened hammer. The revolver is fitted with checkered grips featuring the "S&W" imprint at the top. The revolver has the correct factory box.

Excellent. The revolver retains 98% original nickel finish showing very limited, light flaking. 97% vivid original case colors remain on the hammer and trigger. The grips are also excellent with a few minor handling marks and overall crisp checkering. Mechanically fine. The box is very good with split corners, a small tear on top of the lid and some wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce Wells Fargo Marked Smith & Wesson First Model Schofield Revolver

Lot # 110 (Sale Order: 109 of 920)      

Scarce Wells Fargo Marked Smith & Wesson First Model Schofield Revolver

This is a desirable and colorful variation of the First Model Schofield Single Action revolver. A total of 3,035 of these were manufactured in 1875 with seven inch barrels, walnut grips and blue finish as the configuration. The U.S. Ordnance Department ordered almost the entire production. Many were issued to the 4th Cavalry and the black troops of the 9th and 10th U.S. Cavalry, the "Buffalo Soldiers" of the Indian Wars. Some notorious outlaws and lawmen of the Old West were known to have carried a Schofield as well. The distinctive features of this revolver are the barrel catch attached to the frame rather than the top strap, the gracefully shaped frame and shorter ejector housing. This revolver was one of a number that had the barrel shortened to 5 inches and sold as government surplus to New York dealer Schuyler, Hartley & Graham, who in turn sold them to Wells Fargo. It has the standard two line address/patent dates on the left side of the ejector housing and Schofield's patent information on the right. The right side of the ejector housing below the patent info is marked "W. F. & CO'S. EX." followed by a large "1220". The "1220" is the Wells Fargo & Company inventory number which matched the gun's serial number. The matching serial number is marked on the butt, rear cylinder face (with an "L" below it), and on the inside of the right grip panel. There is also a "P" on the rear cylinder face and "L" and "P" on the bottom of the barrel lug, all U.S. markings. Blade front and notch rear sights, blue finish with casehardened hammer and fitted with smooth walnut grips. With the revolver is a leather holster with a tooled rider on horseback scene marked "407X/5/SWS" on the back.

Very good. The revolver retains 60% original blue finish concentrated on the frame with the balance a smooth brown patina (barrel and cylinder) typical of holster wear. Traces of original case colors remain on the hammer and trigger guard. The grips are very good with a circular blemish, high edge wear and some minor handling marks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Smith & Wesson New Model 3 Target Single Action Revolver

Lot # 111 (Sale Order: 110 of 920)      

Smith & Wesson New Model 3 Target Single Action Revolver

Although cataloged into the early 1900s, all New Model 3 frames were manufactured by 1898 and was Smith & Wesson's first top break, automatic ejection revolver. The top of barrel rib is marked with the one line address "SMITH & WESSON SPRINGFIELD MASS. U.S.A." The left side of the barrel is marked "44 S&W CTG" flanked by maltese crosses. The right side of the frame has the S&W trade mark. It is equipped with pinned blade Lyman front and square-notch adjustable rear sight. The face of the hammer is checkered. Blue finish with casehardened hammer and trigger guard, and fitted with checkered grips featuring a diamond around the screw. Also equipped with a checkered trigger. While no factory letter is present it is on this writers experience this was a special order feature done by the factory.

Very fine. The revolver retains 70% original blue finish with the balance a smooth brown patina and showing scattered small patches of discoloration from improper storage. "LM" is crudely marked on the right side of the frame above the S&W trade mark. Limited light pitting is present. Traces of original case colors remain on the hammer and trigger guard. The grips are very fine with some very scattered minor handling marks and overall crisp checkering. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Engraved Smith & Wesson First Model New Model Navy No. 3 44 Double Action Revolver Presented to a Ne

Lot # 112 (Sale Order: 111 of 920)      

Engraved Smith & Wesson First Model New Model Navy No. 3 44 Double Action Revolver Presented to a New York City Firefighter

This example has a New York style period engraving and was presented to a New York City firefighter in the early 20th century. The scroll engraving covers the rear sides of the barrel and sides of the frame with wedges of scrollwork on the cylinder between the flutes and behind the hammer. A leaf is engraved on the trigger guard and dots are featured around the hammer. The left side of the frame is inscribed "N.Y.F.D./H.&L. C.o. No. 130" and the back strap is inscribed "Lt. C.F. Douth". Charles F. Douth was the winner of the James Gordon Bennett award in 1903. According to the website NYC.gov, "The James Gordon Bennett Medal was established in 1869 and, for years, it was the sole decoration awarded for valor in the Fire Department of the City of New York. As a result of its seniority among medals, it is awarded annually for the most outstanding act of heroism after the consideration and deliberate judgment of the members of the Board of Merit of the NYC Fire Department." Douth is listed as a recipient of the award on the NYC.gov website. The top of the barrel rib is marked with the two line address/patent dates and matching serial number is marked on the butt, rear cylinder face, barrel and barrel latch. Fitted with diamond checkered grips with the right grip panel numbered to the gun.

Very good as professionally embellished. The revolver retains traces of blue finish in the protected areas with a smooth brown patina on the balance. The German silver blade front sight is a replacement. The grips are fine with some wear in the checkering and a few minor handling marks. Cylinder is slightly loose, otherwise action is fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Factory Cased Smith & Wesson Model 1 1/2 Second Issue Revolver

Lot # 113 (Sale Order: 112 of 920)      

Factory Cased Smith & Wesson Model 1 1/2 Second Issue Revolver

The factory referred to this model as the "New Model 1 1/2", manufactured between 1868 and 1875. The top of the barrel rib is marked with the two line Springfield, Mass. Address/patent and reissue dates. The two patent date markings are on the top strap. The matching serial number is marked on the butt, rear cylinder face, barrel latch and rear of the top strap. Pinned blade front sight and notch rear sight, nickel finish with casehardened hammer and fitted with checkered hard rubber grips with the intertwined "S&W" logo at the top. Comes in an original wooden case with wine colored velvet lining and 40 round bullet block.

Very fine. The revolver retains 85% original nickel finish with scattered minor flaking and an area of pitting on the cylinder. The hammer shows strong traces of bright original case colors mixed with a smooth brownish patina. The grips are excellent with a few minor handling marks and crisp checkering. The markings are clear. The action is fine. The case is very fine with some minor dents and light scratches on the exterior, and some soiling and contact wear on the lining.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,100.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce Outstanding Smith & Wesson Model 320 Single Action Revolving Rifle with 16 Inch Barrel, (One

Lot # 114 (Sale Order: 113 of 920)      

Scarce Outstanding Smith & Wesson Model 320 Single Action Revolving Rifle with 16 Inch Barrel, (One of 239), Shoulder Stock and Case

Manufactured 1879 to 1887 with a total production of only 977, this is one of the rarest Smith & Wesson firearms produced. Of the 977 manufactured, 840 remained in the U.S., 137 were exported and only 239 were manufactured with the 16 inch barrel. Serial numbered from 1 to 977. This scarce and unusual revolving rifle was sometimes referred to as the Smith & Wesson "Buntline Special" in the combination of a long barreled revolver with attaching shoulder stock. This Model 320 was manufactured using the frame, cylinder and basic action of the New Model No. 3 revolver with some minor differences in the hammer and trigger, with the barrel composed of two pieces. A slot is cut into the butt and a hole drilled in the back strap to accommodate the shoulder stock. The rifle features a 16 inch barrel with a blade front sight and a two leaf folding rear sight on a solid rib marked with the two line address/patent date marking. The serial number is found on the butt, cylinder, barrel and barrel latch. Blue finish with casehardened hammer and trigger guard. The barrel is fitted with a checkered red mottled hard rubber forearm with the S&W monogram. The grips are matching with S&W monograms in a circle at the top. The stock is smooth walnut with nickel finished attaching iron and a checkered hard rubber buttplate with S&W monogram. With the gun is a stock tang peep sight, a globe front sight with crosshair aperture, a brass cleaning rod and a box of UMC .32 S&W rifle cartridges. The original hard leather case has double leather straps, a leather handle and brass corner protectors. The lining is felt and there are three compartments (one for the rifle, one for the stock and one for a box of cartridges).

Excellent. The revolving rifle retains 95% original high polished blue finish with a smooth brown patina along high points. Some light pitting is present on the left side of the barrel towards the muzzle. The hammer and trigger guard retain most of their original case colors slightly muted. The screws of frame still exhibit nearly all of their brilliant original niter blue finish. The forearm and grips are also excellent with overall crisp checkering. The stock is also excellent with some very scattered minor handling marks and the attaching iron retains 80% original blue finish. Mechanically fine. The case is good with worn lining and some wear to the exterior.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 20,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

New York Engraved 44 Rimfire Smith & Wesson Number Three First Model American Single Action Revolver

Lot # 115 (Sale Order: 114 of 920)      

New York Engraved 44 Rimfire Smith & Wesson Number Three "Second" Model American Single Action Revolver with Relief Carved Ivory Grips

Manufactured between 1872 and 1874 with a total production of approximately 8,000. The sides of the barrel and frame are decorated with typical New York floral scroll and geometric design engraving. The cylinder flats and upper portion of the back strap have floral scroll engraving, with a simple scallop border on the rear of the cylinder, scallop border and simple line design on the back strap and the sides of the top strap have a geometric design. "SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT. JULY 10. 60. JAN. 17. FEB. 17. JULY 11. 65 & AUG. 24. 69" marked on top of the barrel rib flanked by Maltese crosses. The serial number (13992) is marked on the underside of the butt and the matching assembly number "806" is marked on the rear cylinder face (twice), latch and barrel. The letter "C" is stamped below the two cylinder numbers. Pinned blade front and notch rear sights and fitted with two piece ivory grips with relief carved Mexican eagle on the left panel and a silver butt cap with relief grotesque face.

Good. The metal surfaces have a smooth gray patina with strong traces of thin original blue finish in protected areas. The grips are also good with a small plug on the left panel where a screw escutcheon was and showing a dark aged patina with numerous age cracks on the left panel and a couple small age cracks on the right panel. A small portion of the barrel address is visible and the engraving is crisp and clear. Mechanically fine. The last digit of the serial number is barely readable, however appears to be a partial number "2".

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Fine Smith & Wesson New Model No. 3 Single Action Revolver

Lot # 116 (Sale Order: 115 of 920)      

Very Fine Smith & Wesson New Model No. 3 Single Action Revolver

The New Model No. 3 was an improved design of the original Model 3 and was introduced in 1878. The top of the barrel rib is marked with the two line address and patent dates "SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT'D JAN 17 & 24. 65. JULY 11. 65./AUG 24. 69. APR 20. 75 FEB 20. & DEC 18. 1877 REISSUE JULY 25. 1871." It has the six-shot fluted cylinder with automatic ejector, a pinned half moon front sight and desirable walnut checkered diamond pattern grips. Matching numbers (33630) on the butt, barrel latch, and cylinder with the barrel having the number "34468B".

Very fine. The revolver retains 60% plus original blue finish concentrated on the frame with the balance a smooth brown-gray patina on the high edge of the barrel, typical of holster wear. The hammer and trigger guard retain 40% original case colors with what appears to be a pea-sized repair on the under side. The grips are fine with some minor handling marks and some blemishes in the checkering. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Smith & Wesson Number 1 1/2 2nd Issue Single Action Revolver

Lot # 117 (Sale Order: 116 of 920)      

Smith & Wesson Number 1 1/2 2nd Issue Single Action Revolver

Manufactured circa 1868-1875. German silver blade front and notch rear sights, with the one line address and patent dates on the barrel rib and the serial number on the butt. Fitted with a pair of smooth birds-head grips.

Very good as partially refinished (cylinder). With 80% of the high polish blue overall, showing some areas of brown patina, scattered light spotting, and some mild handling marks. The grips are very good, with a few light dents and strong varnish. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Desirable Smith & Wesson New Model Number Three Target Single Action 32-44 Revolver Serial Number 17

Lot # 118 (Sale Order: 117 of 920)      

Desirable Smith & Wesson New Model Number Three Target Single Action 32-44 Revolver Serial Number 17 with Special Finger Spur

Introduced in 1887 with this example having a special order finger spur trigger guard as commonly observed on Russian Models. Equipped with a pinned front sight with bead and a notch rear sight on the barrel latch. The top of the barrel rib is stamped with the two line address and patent dates which end with "REISSUE JULY 25, 187". The matching two digit serial number "17" appears on the butt, barrel, cylinder and barrel latch. Nickel plate with casehardened hammer and trigger guard and fitted with checkered S&W monogram grips with the right grip panel numbered to the gun. According to the consignor, the revolver was shipped to M.W. Robinson of South Carolina in May 1887. With the revolver is a box of UMC .32-44 S&W Target Revolver cartridges (37/50) and a contemporary wooden case.

Fine as period re-plated. The revolver retains 80% of the nickel finish with the balance a smooth gray patina. Some mild pitting is present on the grip straps. Traces of original case colors remain on the hammer and trigger guard. The grips are very fine with some minor handling marks and a spot of wear in the overall crisp checkering. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Desirable Smith & Wesson Number 3 Russian 1st Model Single Action Revolver

Lot # 119 (Sale Order: 118 of 920)      

Desirable Smith & Wesson Number 3 Russian 1st Model Single Action Revolver

This is an example of a 1st Model No 3 Smith & Wesson commercial revolver. Also known as the "Old, Old Model Russian Revolver", these revolvers were developed for the Russian Government in 1871 and manufactured until 1874. The total production of the commercial First Model Russian was 5,165. These revolvers were identical to the Number 3 American except chambered for the 44 S&W Russian cartridge and the "RUSSIAN MODEL" marking on the address. The top of the barrel rib is marked "SMITH & WESSON SPRINGFIELD. MASS.U.S.A.PAT.JULY.10.1860.JAN.17.FEB.17.JULY.11.65 & AUG.24.69. RUSSIAN MODEL". The serial matching number is marked on the butt and on the inside of the right grip panel. The matching assembly number "832" is marked on the rear cylinder face, right frame heel under the grip and on the barrel. The barrel latch is numbered "33386". Pinned blade front and notch rear sights, blue finish with casehardened hammer and trigger guard, and fitted with smooth two-piece walnut grips. There was a swivel on the butt, however it has been removed.

Very good. The metal surfaces have a smooth mottled gray patina with traces of original blue finish in protected areas. The grips are also very good with some wear on the lower edges and minor dents and handling marks. The barrel marking is crisp and clear. Mechanically fine. Overall a strong, seldom encountered, 1st Model Russian.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Smith & Wesson Model 320 Single Action Revolving Rifle with 16 Inch Barrel, Shoulder Stock and Case

Lot # 120 (Sale Order: 119 of 920)      

Smith & Wesson Model 320 Single Action Revolving Rifle with 16 Inch Barrel, Shoulder Stock and Case

Manufactured 1879 to 1887 with a total production of only 977, this is one of the rarest Smith & Wesson firearms produced. Of the 977 manufactured, 840 remained in the U.S., 137 were exported and only 239 were made with the 16 inch barrel. Serial numbered from 1 to 977. This scarce and unusual revolving rifle was sometimes referred to as the Smith & Wesson "Buntline Special" in the combination of a long barreled revolver with attaching shoulder stock. This Model 320 was manufactured using the frame, cylinder and basic action of the New Model No. 3 revolver with some minor differences in the hammer and trigger, with the barrel composed of two pieces. A slot is cut into the butt and a hole drilled in the back strap to accommodate the shoulder stock. The rifle features a 16 inch barrel with two leaf folding rear sight on a solid rib marked with the two line address/patent date marking. The serial number is found on the butt, cylinder, barrel and barrel latch. Blue finish with casehardened hammer and trigger guard. The barrel is fitted with a checkered red mottled hard rubber forearm with the S&W monogram. The grips are matching with S&W monograms in a circle at the top. The stock is smooth walnut with blue finished attaching iron and a checkered hard rubber buttplate with S&W monogram. With the gun are the following: 2 front sights, a stock peep sight, cleaning rod with attachments, a bullet seater and a contemporary partitioned case.

Fine. The rifle retains 80% original blue finish with the balance a smooth brown patina. The cylinder retains traces of blue with the balance a cleaned smooth gray patina. Some mild pitting is present. Traces of original case colors are retained on the hammer and trigger guard. The forearm and grips are excellent with a few minor handling marks and overall crisp checkering. Mechanically fine. The stock is very fine with a few minor pressure dents and some minor scratches. The attaching iron retains 80% original blue finish thinning to a brown.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 13,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Desirable UMC .320 Smith & Wesson Revolving Rifle Cartridges

Lot # 121 (Sale Order: 120 of 920)      

Desirable UMC .320 Smith & Wesson Revolving Rifle Cartridges

Two piece UMC box of .320 Smith & Wesson Revolving Rifle cartridges with the white label featuring an illustration of the Smith & Wesson Model 320 Revolving Rifle (see photo). The box is for 50 cartridges with 49 cartridges (without head stamps) included.

Fine with a few split corners and most of the label remaining with overall clear printing.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Historic Smith & Wesson Model 1 Second Issue Revolver Inscribed to President Lincoln Assassination C

Lot # 122 (Sale Order: 121 of 920)      

Historic Smith & Wesson Model 1 Second Issue Revolver Inscribed to President Lincoln Assassination Conspirators Trial Witness Marcus P. Norton with Factory Letter

This Smith & Wesson Model 1, Second Issue revolver is inscribed to Marcus P. Norton on the back strap. Marcus P. Norton was one of 366 witnesses that gave testimony during the trial of the President Abraham Lincoln assassination conspirators. Norton's testimony implicated Dr. Samuel Mudd in the Lincoln assassination and thereby involvement with a group of Confederate sympathizers that conspired to plunge the U.S. federal government into chaos following the closure of the Civil War. On the night of April 14, 1865, only five days after Confederate General Robert E. Lee surrendered his army at Appomattox Court House, Virginia, well known actor John Wilkes Booth mortally wounded President Abraham Lincoln while he watched a performance of "Our American Cousin" at Ford's Theater in Washington, D.C. and Booth's co-conspirator Lewis Powell attempted to assassinate Secretary of State William H. Seward at his Washington D.C. home. Vice President Andrew Johnson was the third national leader targeted by the conspirators, but conspirator George Atzerodt aborted the attack. By the end of April, Booth had been killed while resisting arrest and eight of the nine accused conspirators were in custody. One of these men was Dr. Samuel Mudd who set Booth's broken leg, an injury that Booth received when he made a dramatic leap out of the Ford's Theater presidential box after shooting Lincoln. At the nine man military commission to try the conspirators, Marcus P. Norton testified that in March 1865 a man that he would later recognize as Samuel Mudd had burst into his room at the National Hotel and claimed that the man apologized, saying that he thought the room had belonged to a man named Booth. Norton also claimed to have seen Booth and two other accused conspirators, Atzerodt and O'Laughlin, during his stay at the hotel. The testimony given by Norton presented a pre-assassination connection between Mudd and Booth which placed doubts on Mudd's claim that he did not know Booth prior to setting Booth's leg. The defense called witnesses questioning Norton's veracity while the prosecution called witnesses that refuted such claims. The military tribunal lasted more than fifty days with 421 pages of testimony recorded and edited by Benn Pitman. All of the accused were found guilty with four of the conspirators receiving a death sentence and were hanged in the Old Arsenal Penitentiary on July 7, 1865. Mudd was spared the death penalty by one vote and was instead sentenced to life imprisonment, but was soon pardoned by President Andrew Johnson and released from prison on March 8, 1869. Mudd's degree of culpability in the assassination plot has remained a controversy to this day. The barrel rib on this revolver is marked with the one line address and the cylinder has the patent date marking. As stated, "Marcus P. Norton" is script engraved on the back strap which is without a question a period jeweler inscription. The right grip panel is numbered to the gun. The included Smith & Wesson factory letter confirms the barrel length, blue and silver two tone finish and smooth rosewood grips and states that the revolver was part of a 50 unit (all in two tone finishes) shipment to Cooper & Pond Co., New York City, New York, shipped on October 24, 1861. Also with the revolver are two Lincoln conspirators trial references: John Armor Bingham and David Herold's TRIAL OF THE CONSPIRATORS, FOR THE ASSASSINATION OF PRESIDENT LINCOLN, & C. and THE TRIAL: THE ASSASSINATION OF PRESIDENT LINCOLN AND THE TRIAL OF THE CONSPIRATORS as complied and arranged by Benn Pitman.

Very fine. The barrel and cylinder retain 40% original blue finish with a smooth gray patina on the balance. The brass frame retains 97% original silver plating. The grips are very fine with some minor handling marks and retaining much of the finish. Mechanically fine. A unique opportunity to acquire a popular Civil War arm period inscribed to an individual connected to the Lincoln assassination conspirators trial.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Excellent Smith & Wesson Number 1 1/2 2nd Issue Single Action Revolver with Ivory Grips

Lot # 123 (Sale Order: 122 of 920)      

Excellent Smith & Wesson Number 1 1/2 2nd Issue Single Action Revolver with Ivory Grips

Commonly referred to as the 1 1/2 New Model or 2nd issue 1 1/2, these revolvers were manufactured between 1868 to 1875. The top of the barrel rib is marked with the one line address and patent dates and the serial number is marked on the butt. The matching assembly number "48" is marked on the frame under the grips, the rear of the barrel lug and on the rear face of the cylinder. Blade front and notch rear sights, all nickel finish with casehardened hammer and trigger, and fitted with smooth ivory grips.

Excellent. The revolver retains 95% original nickel finish, with some very minor isolated pitting on the left side of the barrel. Overall there are a few light scratches and minor dings. The hammer retains 60% plus original bright case colors with some faded case colors still visible and a smooth gray patina on the balance. The grips are also excellent with a couple of minor age cracks, an attractive grain and a mellow patina. The barrel markings are sharp. The action is fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Engraved Gold Plated Civil War Range Smith & Wesson No. 2 Old Army Revolver

Lot # 124 (Sale Order: 123 of 920)      

Engraved Gold Plated Civil War Range Smith & Wesson No. 2 Old Army Revolver

This example features an old custom engraving with gold plating. The frame and barrel lug have a floral scroll and punch dot engraving. The left and right barrel flats have a wedge of scrollwork flanked by a wavy line pattern and the lower right and left flats have a wedge of scrollwork at the muzzle. The cylinder features line pattern engravings with a wide band of a scroll and punch engraving at the front. The serial number and a wedge of scrollwork appears on the butt. The cylinder has the patent date marking and the barrel has the one line address.

Very fine as professionally embellished. The revolver retains 80% of the gold plating with a smooth dark patina on the balance. Some pin point pitting is present on the cylinder. The grips are excellent with a couple very small surface chips missing near the bottoms. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine and Early Civil War Range Smith & Wesson Model No. 2 Army Revolver

Lot # 125 (Sale Order: 124 of 920)      

Fine and Early Civil War Range Smith & Wesson Model No. 2 Army Revolver

This revolver falls into the Civil War serial number range. Although popular with Union officers, the Model No. 2 was never officially adopted by the U.S. Army. The top of the barrel is marked with the Springfield address and the cylinder marked "PATENTED APRIL 3, 1855, JULY 5, 1859 & DEC 18, 1860." around the center. The serial number is marked on the butt and inside of the right grip panel. Six round unfluted cylinder, smooth spur trigger, casehardened checkered hammer, with smooth rosewood grips on a square butt.

Fine. The revolver retains 40% original blue finish with a smooth brown patina on the balance. The grips are fine showing a small surface chip missing (right panel) and some minor handling marks with most of the varnish remaining. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Masterfully Engraved and Gold Inlaid Black Powder Colt Single Action Army Revolver Copied After L. D

Lot # 126 (Sale Order: 125 of 920)      

Masterfully Engraved and Gold Inlaid Black Powder Colt Single Action Army Revolver Copied After L. D. Nimschke's Gold Inlaid Single Action Army Revolver

This is a spectacular example of a custom engraved and gold inlaid antique black powder Single Action Army revolver which was masterfully done a copy of the an L.D. Nimschke gold inlaid Colt Single Action Army revolver. The correct original revolver is pictured and described in detail on pages 338-339 of "The Colt Engraving Book Volume One" by R.L. Wilson. In part the caption reads "Only known gold inlaid Single Action Army by L.D. Nimschke, as represented in the Nimschke scrapbook, pages 83 and 84". Accompanying one of the sets of the Nimschke pulls was a notation in Nimschke's handwriting "Furmann/1888". That revolver has a gold MG monogram on top of the back strap, those initials belonging to Mexican President General Manuel Gonzales (in office 1880-1884). Exactly like that revolver, this revolver features 80% coverage of floral scroll engraving with a punch dot background on the barrel, frame, cylinder, ejector housing, loading gate and butt. There is a feather design flanking the top strap, zigzag and scallop designs on the top of the ejector housing and a geometric design around the rear of the cylinder. There is a scallop and dot border on the outer edge of the trigger guard plate. The barrel features double gold inlaid bands around the breech and muzzle ends, gold inlaid border around the engraving on the top strap, gold band around the rear of the cylinder and gold bordering on the frame and back strap, as well as gold scroll accents. The top of the back strap has the gold inlaid monogram "MG". The top of the barrel is marked with the one line address in a scallop and dot bordered panel and the underside of the barrel is marked "44". The upper left front of the trigger guard bow is marked "44 CAL" in a decorative engraved panel. The left side of the grip strap under the grip is marked "ANT. COLT DUPL.", which clearly signifies that this revolver is a duplicate antique Colt revolver. The serial number, "126506*" is marked on the bottom of the frame, trigger guard and back strap followed by a star (to denote clearly that it is a duplicate). Blade front and frame notch rear sights, all blue finish with polished hammer sides and fitted with checkered hard rubber Rampant Colt/Federal eagle grips.

Near mint Professionally and masterfully embellished custom with some very minor spotting in some of the cylinder flutes, a smooth brown patina on the back strap and some smooth gray and brown patina on the front strap. The grips are as new. A rare opportunity to own an exact copy of the only known gold inlaid Single Action Army revolver done by Master Engraver L.D. Nimschke that R.L. Wilson called "…one of his most important achievements."

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 22,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 5 of 37

1.178.0.790.bd1250c.8.248