Premiere Firearms Auction - Day 2

Premiere Firearms Auction - Day 2

Saturday, September 8, 2018  |  9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 2

Premiere Firearms Auction - Day 2

Saturday, September 8, 2018  |  9:00 AM Central
Auction closed.
Internet Premium: 21.5%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 11 of 41

"US" Marked Colt Model 1860 Army Richards-Mason Revolver

Lot # 1250 (Sale Order: 251 of 1003)      

Exceptional Documented "US" Marked Colt Model 1860 Army Richards Conversion Revolver Formerly in the William M. Locke Collection

Total production of these U.S. Richards conversions is estimated at around 1,200, and any example in high condition is very hard to find, especially the exceptionally scarce U.S. contract revolvers like this one. These conversions are important pieces in the evolution of Colt firearms and bridge the gap between the iconic percussion revolvers that established Colt as the name associated with revolvers and the Single Action Army revolver that became the most iconic handgun in history. The Richards conversion was patented by Assistant Superintendent Charles Brinckerhoff Richards at Colt in July 1871. He also patented the design for the Colt Cloverleaf House Model that same year and worked alongside William Mason, the superintendent, in designing the famous Single Action Army. This revolver has the mixed numbers and government inspection markings associated with the Richards conversion revolvers for the U.S. government. This exact revolver is pictured on page 140 of "The William M. Locke Collection" by Frank Sellers (incorrectly listed as a Richards-Mason). Existing revolvers from multiple government arsenals were shipped back to Colt for these conversions. The conversion consisted of shaving 3/16 of an inch off of the recoil shield to accommodate the installation of the Richards breech plate which has an integral notch rear sight, a loading gate, and a rebounding firing pin. The recoil shield was also machined to provide a straight channel for the loading and ejecting of cartridges. The hammer was ground flat to properly strike the firing pin. The barrel was machined to accept the Richards ejector assembly which is secured by a screw and an extension that fills in the original loading lever channel. This example has the standard First Model Richards Conversion loading gate that has an internal coil spring and features a German silver blade front sight, "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" on top of the barrel, "US" by the wedge screw, standard "COLTS/PATENT" marking on the frame which was originally cut for use with a shoulder stock, naval battle roll scene and "AP" marking on the cylinder, "A" and "H" sub-inspection marks on the trigger guard, "G" and "6" near the toe of the front strap on the left, recoil shield/breech plate with integral notch rear sight, borderless knurling on the hammer spur, "T" sub-inspection mark on the top of the back strap, and a smooth walnut grip with Orville W. Ainsworth cartouche. Ainsworth also famously inspected the first Single Action Army revolvers which included those issued to Custer's 7th Cavalry, and these conversion revolvers were also used in the Indian Wars of the post-Civil War era. Matching conversion serial numbers "78" are marked on the ejector, barrel (twice), wedge, cylinder, frame, and trigger guard. The other numbers are: "84599" on the barrel, "1950" on the cylinder pin, "57590" on the trigger guard, "118760/332" on the back strap, "70" on the recoil shield and loading gate, and "332" in the replacement back strap inlet of the grip. The original serial number on the frame was removed when the frame was converted and refurbished, but faint traces of it can be seen upon close inspection. The conversion assembly number was stamped directly on the location of the original number. Those revolvers that retained original serial numbers had the assembly number shifted below.

Class: Antique

Exceptionally fine as arsenal refurbished overall with 80% casehardened finish which retains vibrant colors, 85% plus blue finish, light muzzle and edge wear, patches of light gray and brown patina and some slight oxidation, the vast majority of the rich niter blue on the trigger, 90% plus silver plating on the trigger guard/front strap with mild fading at the edges and light aged patina, and some scattered light scratches and marks. The grip is fine and has a partially faded but clearly legible cartouche, minor edge wear, and some minor scratches and dings. It remains mechanically excellent. This is easily one of the finest U.S. Contract First Model Richards Conversion Colt Model 1860 Army revolvers in existence and should be destined for a prized position in one of the finest collections of Colt firearms as it already has been before.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 17,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Gustave Young Engraved Colt Model 1849 Pocket Revolver

Lot # 1251 (Sale Order: 252 of 1003)      

Factory Engraved Colt Model 18 Pocket Percussion Revolver

This beautiful revolver was manufactured in 1853 and features very fine Germanic scroll and floral engraving with stippled backgrounds and a wolf head design on the hammer engraved by Gustave Young. A dog's head is to the left of the wedge on the left side of the barrel, and an eagle head is also below the hammer screw on the left. A group of six dots are located on the back of the hammer; each dot represents a ten hour day of work. Young first started working for Colt just one year earlier and remained Colt's contractor for engraving into the mid-1860s. The barrel has a round post front sight and presentation style "Saml Colt" hand engraved with light flourishes at either end. "COLTS/PATENT" is hand engraved within a banner on the left side of the frame. The back strap had a panel left plain for an inscription to be added, and the initials "DK AK" were later crudely inscribed. "DK" is also inscribed by the trigger. The cylinder has the standard stagecoach scene. All of the serial numbers match, including the grip in the back strap inlet, and the "center punch" mark used to denote factory engraving is by the main numbers. The grip has a piano varnished finish and attractive figure. The Model 18 Pocket was Colt's most popular percussion revolver and helped firmly establish his name as synonymous with handguns.

Class: Antique

Fine with 75% of the original silver plating remaining on the grip frame, very dark brown patina visible on the barrel and cylinder, (some minute traces of blue) grey and brown patina on the frame, aged patina on the exposed brass, mild oxidation and pitting, and moderate overall wear including some deformation on the upper left of the back strap. Most of the markings and engraving remain distinct. The grip is very good and has moderate handling and storage wear, some subtle figure, and some minor scratches and dings. Mechanically needs work as the cylinder does not rotate when the hammer is retracted. This is a solid representative example of Gustave Young's work for Colt and a fine representative of his distinctive style.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1855/New Model 6A Root Percussion Revolver

Lot # 1252 (Sale Order: 253 of 1003)      

Cased London Colt Model 1855/New Model 6A "Root" Percussion Revolver

The "Root", as it is commonly known, was the only solid frame percussion revolver Colt manufactured. The Model 6A is one of the rarer variations. This one was manufactured in 1864 and has a brass post front sight, "ADDRESS COL. COLT/NEW-YORK U.S.A." barrel address, British proof and view marks, the stagecoach cylinder scene, and matching serial numbers on the barrel, cylinder, and butt. It comes in hardwood case with a London addressed label with "DIRECTIONS FOR USING/COLT'S NEW MODEL PISTOLS, RIFLES, CARBINES, AND SHOT GUNS," bore rod, Eley Bros. cap tin, L-shaped combination tool, blued Colt patent bullet mold, oiler, Dixon & Sons bag shaped powder flask, bullets, and a key.

Class: Antique

Fine with 30% plus original blue finish, traces of original case colors, gray and brown patina on the faded areas, mild scratches and dings, light oxidation, and some edge wear and rub marks on the otherwise fine grip. Mechanically needs work: the trigger has to be manually reset. The case is very good with a fine original interior label, moderate storage wear including some cracking. The accessories are fine and have mostly storage type wear.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt "Texas Paterson" No. 5 Percussion Revolver

Lot # 1253 (Sale Order: 254 of 1003)      

Rare Documented Colt "Texas Paterson" No. 5 Percussion Revolver with Loading Lever

Manufactured from 1838 to 1840. The revolver has the distinctive flared walnut grip, an Ehlers loading lever and the rounded back 5-shot cylinder featuring the stagecoach scene. The top barrel flat is marked "- Patent Arms No.. Co. Paterson, N.J. Colt's Pt." reading from the breech to the muzzle with the "snake and star" marking on each end. The matching serial number "818" is stamped on the butt, barrel lug below the cylinder pin hole, cylinder (rear) and wedge. The No. 5 was the most popular Colt Paterson revolver. The Ordnance Department purchased 150 No. 5 revolvers in 1840 for issue to the U.S. Navy; 100 of these revolvers were shipped to the Pacific Squadron. The Republic of Texas purchased 180 No. 5 revolvers with nine inch barrels. Some of these revolvers were issued to the Texas Rangers commanded by Jack Hays in his fight with the Comanche Indians that was subsequently depicted on the cylinders of the Colt Walker and Dragoon revolvers. The Texas Model Paterson is the most desirable of all the rare and highly collectable Colt Paterson revolvers. This revolver is pictured on page 147 of "The Paterson Colt Book" by R.L. Wilson.

Class: Antique

Very good. The barrel retains 25% original blue finish and the frame retains traces of original case colors, otherwise a smooth gray patina mixed with some minor pitting. Most of the cylinder scene remains. The professionally restored grip is good with a few minor dings and high edge wear. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 70,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Fine Colt Model 1851 Navy Percussion Revolver

Lot # 1254 (Sale Order: 255 of 1003)      

Very Fine Colt Model 1851 Navy Percussion Revolver

This is a very fine original example of a Colt Model 1851 Navy revolver that was manufactured in 1866. The top barrel flat is marked with the one line New York, U.S. America address, "COLTS/PATENT" is marked on the left side of the frame, and "36 CAL" on the left trigger guard shoulder. The matching serial number is marked on the barrel, frame, trigger guard and back strap. The cylinder is roll engraved with the naval battle scene and marked "COLTS PATENT No 1721". Blue barrel and cylinder, casehardened frame and hammer, and silver plated brass trigger guard and back strap. Fitted with a smooth one piece varnished walnut grip. The Model 1851 Navy was carried to the West by the thousands of men and women seeking their fortunes through cattle, mining, or theft after the Civil War.

Class: Antique

Very fine. The barrel retains 90% bright original blue finish with scattered minor scratches and some edge wear. The cylinder has 25% blue with the balance a smooth gray patina with patches of smooth dark brown. The cylinder scene is nearly all visible. 60% original bright case colors remain on the frame, hammer and loading lever. 20% of the age darkened silver plating remains, mainly in protected areas, and the exposed brass has a pleasant aged patina. The exceptionally fine grip retains most of the original varnish and shows some mild lower edge wear and overall some scattered minor dings and dents. The markings are clear. The action is tight.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Fine Colt Pocket Navy Percussion Revolver

Lot # 1255 (Sale Order: 256 of 1003)      

Very Fine Colt Pocket Navy Percussion Revolver

The Pocket Navy or Pocket Model of Navy Caliber like the Model 1862 Police was based upon improved steels and the rebated cylinder design first used on Colt's Model 1860 Army revolvers. It offered more fire power while still remaining the same size as the popular Model 18 Pocket. This one has the shortest standard barrel length, a small cone front sight, "ADDRESS COL SAML COLT NEW-YORK U.S. AMERICA" on top of the barrel, COLTS/PATENT" marking on the left side of the frame, standard cylinder roll scene, "36 CAL" on the left side of the trigger guard, and all matching serial numbers including the grip.

Class: Antique

Very fine. 85% of the original case colors remain, 75% of the bright original blue finish remains on the barrel, 30% original blue remains on the cylinder, and patches of original silver plating remain on the grip frame. There is some mild oxidation and general light scratches and dings. The grip is excellent and has mild edge wear, most of the glossy original varnish, and minor marks. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Fine U.S. Army Contract Colt Model 1851 Navy Percussion Rev

Lot # 1256 (Sale Order: 257 of 1003)      

Very Fine U.S. Army Contract Colt Model 1851 Navy Percussion Revolver

Manufactured in 1857, this is a very nice example of a 3rd Model 1851 "Army-Navy" revolver in the 42000-80000 serial number range which were purchased by the U.S. Army prior to the Civil War. Revolvers in this serial number range were issued to the 1st and 2nd Cavalry Regiments and were used extensively in campaigns against hostile Indians in and prior to the Civil War. These revolvers also saw service during the Civil War and saw additional service on the frontier after being sold as surplus. The term "Army-Navy" is derived from the fact that the Army purchased these "Naval Caliber" revolvers. The top of the barrel flat is marked "-ADDRESS SAML COLT NEW YORK CITY.-", and the left side of the frame is marked "COLT'S / PATENT / U.S." The left side of the barrel lug at the bottom is stamped with the single inspection letter "T", next to the wedge screw is "D", with an "H" on the opposite, "H" on the top of the back strap, "K" directly behind the trigger guard bow, and there is a "R" and two "D"s on the cylinder. The matching serial number is marked on the bottom of the barrel, frame, trigger guard, and back strap, with the partial serial number "9136" marked on the loading lever, wedge, cylinder and cylinder pin. Standard brass cone front and hammer notch rear sights, blue barrel and cylinder and casehardened frame, loading lever and hammer. Fitted with the correct matching serialized (last four digits, "9136", in ink under back strap) one piece oil finished walnut grip with a crisp and clear "CGC" cartouche on the left side and "WAT" on the right.

Class: Antique

Very fine. The barrel retains 85% plus original military blue finish with some areas thinning to a smooth plum patina. The cylinder shows a smooth bluish gray patina with clear naval engagement scene markings. The frame retains 50% original faded case colors, with the balance having a smooth mottled gray patina. The brass, which was never silver plated, is some what bright on the back strap and has a pleasant mellow aged patina on the trigger guard/front strap and butt, which also shows a few tiny dings. The grip is excellent with minimal lower edge wear and tiny ding on the right toe and a couple along the bottom edge and a couple small minor dents on the lower right side. As noted above, the cartouches are crisp and clear. All remaining markings are also clear and crisp. The action is excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 14,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Presentation Cased Pair of Colt Model 1861 Navy Revolvers

Lot # 1257 (Sale Order: 258 of 1003)      

Extensively Documented Historic Cased Pair of Etched, Silver Plated, and Inscribed Colt Model 1861 Navy Percussion Revolvers Presented to William Mathewson, the Original "Buffalo Bill" -A) Colt Model 1861 Navy Percussion Revolver


Extensively Documented Historic Cased Pair of Etched, Silver Plated, and Inscribed Colt Model 1861 Navy Percussion Revolvers Presented to William Mathewson, the Original "Buffalo Bill" -A) Colt Model 1861 Navy Percussion Revolver
This stunning set of Colt Model 1861 Navy revolvers was presented to western hunter, scout, and fur trader William "Buffalo Bill" Mathewson (1830-1916) by fellow fur trade businessman Elias Hicks Durfee (1828-1875). Mathewson’s history is detailed in "Cowtown Wichita and the Wild, Wicked West" by Stan Hoig, "The Ranch at Cow Creek Crossing" by Louise Barry in the Kansas Historical Quarterly Winter 1972 issue, "William Mathewson: The Original Buffalo Bill" by Richard Latin at Kansas State University in 1989 (copy included), "History of Sedgwick County" (1910) as well as multiple period and early 20th century newspaper articles and subsequent books about antique firearms. Both he and Durfee were born in New York and worked in the fur trade along the Santa Fe Trail. Mathewson worked as a trader starting in 18 and continued in the trade in Kansas starting in 1853 after an 1852 expedition into the Rockies that included Kit Carson. He was nicknamed "Buffalo Bill" after hunting buffalo to feed starving settlers in the winter of 1860-1861 during a famine after a drought. From 1853 to 1863, he operated a trading post at what is now Great Bend, Kansas. He also established a post at Cow Creek Crossing near present day Lyons, Kansas. In 1867, he was given the dangerous task of bringing in various tribes for the Medicine Lodge Treaty to end hostilities on the Kansas plains. That same year, he moved to a farm near what is now Wichita. He continued to trade with Native Americans until 1875. He was one of Wichita’s founders and also helped create the Wichita Savings Bank at which he served as president. He was police commissioner in 1889-1891 and was active in civic and fraternal organizations. According to Latin and "History of Sedgwick County," "Between 1865-73, Mathewson was credited with saving the lives of 54 women and children on the Kansas plains." His home was a popular stopping point for military officers and other travelers, and there are reports of parties meeting up with him at his home to go out with him on buffalo hunts. Durfee arrived in Leavenworth in 1861 from New York as an agent to buy furs for Swift, Hurlbut & Co. He eventually established multiple trading posts up the Missouri River and purchased a whole line of steamboats to move his goods up and down the river. In 1867, he was working as an importer and wholesaler of Indian trade goods in Leavenworth. The day before the presentation date on the case, Durfee signed an affidavit relating to a dispute concerning details relating to a delivery of buffalo robes and characterizations of "Hancock's Indian Expedition." The expedition is detailed in General George Armstrong Custer's book "My Life on the Plains," and Custer was in command of the cavalry component of the expedition. Durfee’s statement indicates Mathewson delivered to him $160 in buffalo robes that were presents for U.S. Indian Agent J.H. Leavenworth. It appears that Durfee was Mathewson’s sources of goods that he used to trade with the Indians and purchased furs from him. According to the "Portrait and Biographical Album of Sedgwick County, Kansas" (1888), "in the spring of 1866, Peck, Durfee & Co., of Leavenworth, Kan., presented 'Buffalo Bill' with a very handsome pair of revolvers, mounted in silver, inlaid with gold, as a token of their appreciation of his bravery during the trying times of 1864." According to an article in the "The Wichita Beacon" on March 21, 1916, (at the time of his death) "While in Leavenworth he was presented a pair of ivory-handled, silver mounted revolvers by a government representative. . ." and also indicates the year was 1866. The included copies of pages from "History of Sedgewick County" indicate that in 1866 "about the 1st of May, Mr. Mathewson went to Leavenworth to dispose of a train load of furs that he had collected during the winter" and notes that Peck, Durfee & Company bought furs and shipped them east and also supplied trade goods. "The next day after Mathewson’s arrival in Leavenworth, Mr. Durfee told him that the leading citizens were going to have a banquet at his house the next night, and ma[d]e a special request that he should attend. Mr. Mathewson thanked him for the invitation, but told him it would be impossible for him to attend. The next day Mrs. Durfee and Mrs. Peck came down to Mr. Durfee’s store and insisted Mr. Mathewson’s coming, and told him they would not take no for an
more...

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 350,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Two-Digit Serial Number Fluted Cylinder Colt Model 1860 Army

Lot # 1258 (Sale Order: 259 of 1003)      

Rare Documented Early Two-Digit Serial Number 72 Fluted Cylinder Colt Model 1860 Army Percussion Revolver Formerly in the William M. Locke Collection

This revolver was manufactured in the first days of production of the famous Model 1860 Army revolvers in 1860 and has the distinctive fluted cylinder only used on around 4,000 of the early revolvers in the 3 to 8,000 range and the very rarely seen Model 1851 Navy sized grip and shorter 7 1/2 inch barrel. It is pictured in the middle of page 72 of "The William M. Locke Collection" by Frank Sellers. It features a German silver blade front sight, "-ADDRESS SAML COLT HARTFORD CT.-" on top of the barrel, small "COLTS/PATENT" marking on the left side of the frame, "PATENTED SEPT 10TH 1850" in one of the cylinder flutes, the noted Model 1851 Navy sized brass grip frame with silver plated finish and small "D" and "G" marks on the left side of the trigger guard, and a smooth oil finished walnut grip. The barrel, wedge, rear face of cylinder, arbor pin, frame, trigger guard, back strap, and grip are all marked with the two-digit serial number "72." The rear face of cylinder is also numbered "40" and "55." (Writer has no explanation, but the cylinder is definitely original to the revolver as it clearly carries the matching number "72") Model 1860 Army revolvers with both the fluted cylinder and the Model 1851 Navy length barrel and grip are very hard to find and are important pieces in any complete collection of Colt percussion revolvers. This variation was an important predecessor of the standard Model 1860 Army revolvers that served as the primary handguns of the Union Army.

Class: Antique

Fine with 30% original silver plating concentrated primarily around the trigger guard, aged patina on the brass and silver, strong traces of original blue and casehardened finish, and otherwise smooth gray and brown patina and some slight oxidation on the iron. There are minor marks and scratches throughout. The grip is also fine and has moderate lower edge wear, a few small chips, and minor marks and dings. The markings remain crisp, and the action is mechanically excellent. This is an extremely rare opportunity to get your hands on a highly sought after early variation of the Colt Model 1860 Army.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt - 1851

Lot # 1259 (Sale Order: 260 of 1003)      

Cased Colt Model 1851 Navy Percussion Revolver with Desirable Richmond Virginia Retailer Label

Manufactured in 1853. One-line New York City barrel address, "COLTS/PATENT" on the left side of frame and navy battle scene on cylinder. The upper left front of the trigger guard is marked "V". Matching serial number on the barrel, frame, trigger guard, loading lever, cylinder and back strap, with the partial serial number "6289" on the wedge and cylinder pin. There is an "X" on the left side trigger guard shoulder and a small "3" on the cylinder and on the left side of the barrel lug. The barrel and cylinder are blue, trigger guard and back strap are silver plated, and the hammer, frame and loading lever are casehardened. Brass cone front sight and hammer notch rear sight. Fitted with a smooth grip. In a period case with red velvet lining and S. Sutherland Richmond Virginia retailer label on interior lid lining with a James Dixon & Sons powder flask, a sealed 5 count box of combustible envelope cartridges, a "COLTS/PATENT" marked iron bullet mold, a cleaning rod, a nipple wrench/screwdriver, a Eley Bros. cap tin (full) and a key.

Class: Antique

Fine with 50% thinning original blue finish remaining on the barrel and cylinder with a smooth brown patina on the balance. The frame and loading lever have 25% original faded case colors with the balance a smooth gray patina, and 70% overall of the original age darkened silver remains on the trigger guard and back strap. The exposed brass has a natural aged patina. The grip is also fine with most of the original varnish remaining and some scattered minor dents and dings. The cylinder scene is 100% visible, and the markings are clear. The action is excellent. The case is very good with a slightly loose hinge, a hardly noticeable warp in the lid and overall minor scratches on the exterior. The lining has faded and shows some wear and stains. All of the accessories are fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Colt Third Model Dragoon Revolver, Stock

Lot # 1260 (Sale Order: 261 of 1003)      

U.S. Contract Colt Third Model Dragoon Percussion Revolver with Scarce Detachable Shoulder Stock

Manufactured in 1858. The cylinder has the rectangular stops found only on Third Model Dragoons. The barrel has a nickel silver front sight blade and a two-leaf folding rear sight mounted in a dovetail. The frame has slots cut in the recoil shields and two additional elongated cap-screws in the frame to engage the stock yoke. The barrel is numbered to a different gun and has the one-line New York address partially obscured by the rear sight. "COLTS/PATENT/U.S." is marked on the left side of the frame. The cylinder has the Ranger and Indian fight scene. "1" and "M" are stamped on the left side of the trigger guard. The full serial number is marked on the frame, trigger guard, back strap, and cylinder. The partial serial number "6648" is marked on the loading gate, cylinder pin and wedge. The stock has an iron yoke which slips over the frame screws and engages the slots in the recoil shields. A clamp on the bottom of the yoke engages a slot in the revolver back strap and is tightened by a round knurled nut on the top of the yoke. The stock has an iron sling ring on the lower tang. Stocked U.S. Contract Third Dragoon Revolvers were issued in pairs and the heel of the iron buttplate is stamped with the serial numbers "16501" and "16502."

Class: Antique

Good with period replacement barrel. The barrel retains traces of refinished blue finish in the protected areas, otherwise a smooth brown patina. The remaining surfaces have a mottled brown-gray patina. There is some minor pitting. Traces of the cylinder scene remains. The grip is very good with a small missing sliver near the bottom (left side), high edge wear and some minor dings and scratches. Mechanically fine. The stock very is good with refinished wood showing some minor dings and scratches and the iron hardware having a smooth brown-gray patina with minor pitting. The yoke is loose.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 8,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt U.S. Navy Model 1861 Richards-Mason Cartridge Conversion

Lot # 1261 (Sale Order: 262 of 1003)      

Colt U.S. Navy Model 1861 Richards-Mason Cartridge Conversion Revolver with New York Navy Yard Markings

This is an example of a post-Civil War Colt conversion of a Model 1861 Navy percussion revolver for the U.S. Navy. The Richards-Mason conversion modifications include: (1) plugged loading lever hole, attachment of an ejector housing, (2) modification of the cylinder, frame and hammer and (3) installation of a breech plate without integral rear sight. The revolver has a blue finish on the barrel, cylinder and ejector head. The frame and hammer have a casehardened finish. The trigger guard and back strap are brass. The one-piece grips have an oil finish. The top of the barrel has the standard Colt, New York, America address. The cylinder is roll-engraved with the standard Texas Navy sea battle and Colt patent markings. The left side of the frame is marked: "PAT, JULY. 25, 1871" and "PAT . U.C. 2, 1872." in two lines. The left side of the trigger guard is stamped "36 Cal" and a "2" is stamped on the front left side of the trigger guard bow. The serial number is visible on the underside of the barrel, frame, trigger guard and back strap. The loading gate is stamped with an assembly number. The underside of the barrel is stamped with the New York Navy Yard marking "R.W.M/Anchor".

Class: Antique

Very fine as factory refurbished for the U.S. Navy. The revolver retains 60% of the blue finish on the barrel and cylinder. Most of the roll-engraved Naval Battle scene remains. The frame and hammer retain 50% of the case colors. The brass trigger guard and back strap have a very attractive aged patina. The barrel lug adjacent to the wedge slot is battered. The grips are in fine condition with some handling wear and many small scratches on the butt. A fine example of a significant Colt Navy Richards-Mason cartridge conversion.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Inspected .36 Caliber Gang Mold

Lot # 1262 (Sale Order: 263 of 1003)      

Very Fine and Desirable U.S. "MM"/"WAT" Inspected .36 Caliber Gang Mold

The conical chambers lack grooves. A large domed hinge pin secures the iron sprue-cutter and six round blocks. The left arm is stamped with the U.S. inspector initials "M.M.," and the right arm is stamped with the U.S. inspector initials "W.A.T.".

Class: Other

Very fine with areas of faded original blue finish with the balance a mixed gray patina. The wooden handles have some minor-moderate dings, and the plug on the butt of the left handle is recessed. A welcomed addition to your early Colt military sidearm collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Spectacular Cased Deluxe Factory Engraved Presentation Colt Lond

Lot # 1263 (Sale Order: 264 of 1003)      

Spectacular Cased Deluxe Factory Engraved Presentation Colt London Model 1851 Navy Revolver

Factory cased and engraved Colt London Model 1851 Navy revolver manufactured at Colt's London factory c. 1855. The revolver has the distinctive Colt London Navy features which include: steel back strap and large oval trigger guard, rounded screw heads, cylinder with deep percussion nipple recesses and bordered knurling on the hammer spur. The top barrel flat is roll-stamped: "- ADDRESS COL: COLT. LONDON-" with arrows at either end of the legend. London "Crown/V" and "Crown/GP" proof marks are stamped in engraved ovals on the left side of the barrel lug and between each cylinder chamber. The cylinder is roll-engraved with the Texas Navy battle scene and "ENGAGED 16 MAY 1843." along with "COLT'S PATENT No.". "COLT'S PATENT" is hand engraved in Old English letters on a ribbon on the left side of the frame. The full serial number is stamped on the bottom of the barrel lug, frame, trigger guard, and back strap, on the side of the cylinder and on the top of the loading lever. All of the visible serial numbers match. The revolver has deluxe, English style low relief engraving that consists of fine foliate scrollwork on a granular background with rosette borders surrounding the hammer and loading lever pivot screws. The engraving covers approximately two-thirds of the barrel, the sides and bottom of the loading lever, the entire frame, the hammer top and spur, the bottom and sides of the trigger guard and the back strap. The barrel and cylinder have an English high polish blue finish, the loading lever, frame and hammer are casehardened and the steel back strap and trigger guard are silver-plated. The one-piece grip is deluxe, highly figured, walnut with a piano finish. The revolver is complete with a factory case and accessories. The varnished mahogany case has a inlaid brass escutcheon and recessed carrying handle. The escutcheon is engraved with a crest that depicts a rampant stag and the handle is engraved: "Edward Micklem, R.E.". The case interior is lined with green baize and has six compartments. Colt's "DIRECTIONS FOR LOADING COLTS' PISTOLS" is glued to the inside of the lid. The case contains: (1) blued steel cleaning rod, (2) blued, L-shaped, combination screw-driver/nipple wrench, (3) blued, steel, straight leg, duel cavity bullet mold stamped "COLT'S/PATEN'" on the top the sprue cutter and "4" on the right block, (4) large, 500 count, tin of Eley Bros percussion caps for "COLT'S PT/Belt and Pocket/PISTOLS." (5) bag-shaped powder flask with "4/8, 5/8 and 6/8 dram adjustable charger, lanyard loop on base, brown lacquer body and gold plated top and charger marked: "JAMES DIXON& SONS/SHEFFIELD", (6) pewter oil bottle stamped: "JAMES DIXON/&SONS/SHEFFIELD" on the bottom and (7) assortment of .36 caliber lead balls and conical bullets. Major General Edward Micklem, (1840-1934) attended the Royal Military College at Sandhurst and was commissioned as a Lieutenant, Royal Engineers in 1857. He retired in 1887. This revolver was formerly in the renowned Robert M. Lee Collection and is illustrated and described on pages 200-204 of "Magnificent Colts, Volume I" by Robert M. Lee and R.L. Wilson.

Class: Antique

Excellent. This spectacular revolver is all original. The barrel has at least 98% of the bright original high polish blue intact with only light wear on the barrel edges. The blue on the cylinder shows light flaking but at least 75% of the blue remains intact. The cylinder retains all of the Texas Navy battle scene. The cylinder shows minimal firing wear, and most of the finish on the front and rear face and percussion nipples remains intact. The cylinder safety pins are slightly battered. The loading lever has about 85% of the case colors with some traces of silvering and some scuff marks on the plunger. The frame exterior retains nearly 100% of the unfaded case colors. The inside of the hammer well shows light flash pitting. The hammer has about 80% of the casehardened finish intact with some discoloration on the inside edges. The back strap retains nearly 100% of the silver-plated finish. The silver plating on the trigger guard is about 75% intact with flaking on the grip strap and edges of the trigger cut-out. The deluxe walnut grip remains in excellent condition with about 95% of the original piano finish. The finish shows wear on the lower edges of the grip and has several minor chips. The grips have several shallow handling marks. The flawlessly executed, relief engraved, English scrollwork is deep and crisp with no visible wear. The Colt markings and London proof marks are crisp. The action functions perfectly. The case is all original and remains in very fine-excellent condition. The case exterior has nearly all of the original varnish finish; wear is limited to a few, very minor, handling
more...

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 95,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased First Model Colt Model 1851 Navy Revolver

Lot # 1264 (Sale Order: 265 of 1003)      

Rare Cased Early Production Three Digit Serial Number 413 First Model "Wedge Over Screw" Colt Model 1851 Navy Percussion Revolver and Accessories

This Model 1851 was manufactured in 1850 (the first year of production). The Colt "Revolving Belt Pistol of Naval Caliber" was designed between 1847 and 1850 and was initially called the Ranger Model. Though the name implies maritime use, most Navy revolvers saw use on dry land. While around 215,348 were manufactured in 1850-1873, only an estimated 800 were manufactured in the First Model configuration! The Model 1851 was well-liked for its intermediate caliber (between the .44 caliber Dragoons and .31 caliber Model 18 Pocket) and relatively compact size. It was used by a wide array of well-known American heroes and villains including Wild Bill Hickok, "Doc" Holliday, Robert E. Lee, Nathan Bedford Forrest, and a great many others. Many Navies continued to be used in the American West for many years after cartridge models became available. This example has the early style barrel with an non-beveled loading cut out, screw under the wedge, brass post front sight, and "-ADDRESS SAML COLT NEW-YORK CITY-" stamped on top. The left side of the frame has the "COLT'S/PATENT" marking. The cylinder has the naval engagement scene. The trigger guard has the early squareback bow. The matching serial number is marked on the loading lever, barrel lug, wedge, cylinder pin, cylinder, frame, trigger guard, back strap, and butt of the grip under the back strap. It comes in a factory style hardwood case with a key, W. & C. Eley cap tin, second type Model 1851 Navy bullet mold with "COLTS/PATENT/R/36" on the side of the brass body and healed conical bullet design (correct for "Wedge Over Screw" Navy revolvers pre-serial number 500 per Rapley), assortment of lead bullets, L-shaped combination tool, and a brass powder flask with single side design of a panoply of arms over crossed Paterson revolving rifles, a smaller Colt revolver, and "COLTS PATENT" in a banner. This same flask pattern is pictured and discussed on pages 148 and 1 of "Colt Percussion Accoutrements, 1834-1873" by Rapley and is listed as "the first of the flasks for the 1851 Navy Model . . .This flask is appropriate for the First Model 1851 Navy with the square-back trigger guard, having the screw beneath the wedge."

Class: Antique

Fine with 60% plus original silver plating displaying a mix of aged patinas, smooth aged patina on the brass, traces of original blue finish around the wedge and the bottom of the barrel, trace of original case colors, mostly brown patina on the balance, some spots of mild pitting, distinct cylinder scene and other markings, and minor marks and scratches. The grip is also fine and has moderate lower edge wear, some light scrapes and dings, and slight chips at the toe. Mechanically excellent. The case is very good and has mild storage wear, including staining and fading of the lining. The accessories are very good overall, especially the flask which has distinct designs and attractive aged patina. This is rare opportunity to add a very attractive and original cased First Model Colt Model 1851 Navy revolver complete with a full compliment of original accessories! These do not become available very often!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 16,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Colt First Model Dragoon Percussion Revolver

Lot # 1265 (Sale Order: 266 of 1003)      

U.S. Colt First Model Dragoon Percussion Revolver

Manufactured in 1850. Numbers matching including the wedge. German silver blade front sight on barrel with "ADDRESS SAML COLT NEW-YORK CITY" marked on the top flat. The cylinder is roll engraved with the Ranger and Indian scene, with matching serial number. The frame is three screws with no provision for stock mounting, with "COLTS/ PATENT/ U.S." on the front left side of the frame. The trigger guard is stamped "K" ahead of the trigger guard, and the hammer and cylinder are marked with a small "N". Smooth one piece walnut grips with inspector's cartouches, "JH" in an oval on the left and "WAJ" on the right.

Class: Antique

Very good. All metal surfaces are a dark patina with scattered moderate overall pitting including the cylinder. The cylinder scene is faded but is visible.. The loading lever has had a weld repair, and it has been renumbered to match revolver. The back strap has also been renumbered. All other markings, other than the cylinder scene, are clear. Mechanically sound.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Martially Inspected Colt First Model Dragoon Revolver

Lot # 1266 (Sale Order: 267 of 1003)      

Scarce "G" Martially Inspected U.S. Colt First Model Dragoon Percussion Revolver

This is an example of a highly desirable Colt First Model Dragoon revolver that was manufactured in 18. Only approximately 7,000 of these revolvers were manufactured from 1848 through 18. The revolver has the distinctive First Model oval cylinder stops and brass, square back trigger guard. The U.S. government sub-inspector "G" initial is found on the back strap, cylinder, and loading lever, and "K" is on the barrel. According to the included Gun Report article "U.S. Colt Dragoon Inspectors Initials" by Kirby Howlett, the "G" initial is a scarce marking. An illegible initial is on the frame and hammer. The highly figured replacement grip lacks a cartouche. The barrel has the one-line New York address, the cylinder has the Texas Ranger/Indian scene, and the frame is marked "COLTS/PATENT/U.S." Matching numbers are on the barrel, frame, trigger guard, back strap, cylinder, loading lever, wedge, and arbor pin.

Class: Antique

Fine. The barrel and cylinder retain most of the old, possibly period refinished, blue finish with some minor high edge wear. The loading lever, hammer, and frame have a smooth gray patina. The grip straps have an attractive bright "mustard yellow" appearance. The highly figured replacement grip showing minimal handling evidence. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Inspected 44 Cal Gang Mold and Powder Flask

Lot # 1267 (Sale Order: 268 of 1003)      

Desirable U.S. "WAT" Inspected Colt's Patent Marked .44 Caliber Gang Mold and 20th Century Silver Powder Style Flask

1) Gang mold: A large domed hinge pin secures the iron sprue-cutter and six round blocks. The conical chambers have grease grooves. The right block is marked "44H" at the joint, which refers to 44 Holster (revolver), and the left block is marked with the U.S. inspector initials "WAT." The sprue-cutter is marked "COLTS/PATENT." Both arms are stamped with the letter "T," and the brass hardware for the right wooden handle is marked "7." 2) Silver British made powder flask: "COLTS/PATENT" military/patriotic motif on a single face. Silver hallmarks, "MADE IN ENGLAND" and "7 oz" marked near the threaded cap.

Class: Other

1) Good having a bright appearance and minor dings throughout. 2) Fine with a dent on the bottom and some minor handling/storage marks.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 650.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Richards-Mason Conversion Model 1851 Navy Revolver

Lot # 1268 (Sale Order: 269 of 1003)      

London Cased Colt Richards-Mason Cartridge Conversion Model 1851 Navy Revolver

This revolver is one of 3,800 manufactured in their own serial number range in the mid-1870s from left over percussion components and is one of a select few that was sent to England. It has a brass cone front sight, the New York address, British proof and view marks, the 1871 and 1872 patent markings on the left side of the frame, "36 CAL" on the left trigger guard shoulder, standard naval battle cylinder scene, and matching visible numbers. It comes in an original case with Colt London label, cleaning rod, oiler, key, L-shaped combination tool, and a large cartridge block full of ammunition.

Class: Antique

Fine as completely refinished. The trigger guard and back strap appear to be re-numbered. 98% plus of the finish remains. The silver has taken on an attractive aged patina. There are some light marks and scratches and minor cylinder rotation lines. The refinished grip is slightly undersized but is very good and has smooth oiled finish and light handling and storage marks. Mechanically excellent. The original case and accessories are fine with mostly intact interior label, have mild storage wear including some staining and small tears on the lining. Overall, this is an attractive cased set.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1860 Army Percussion Revolver

Lot # 1269 (Sale Order: 270 of 1003)      

Colt Model 1860 Army Percussion Revolver

Manufactured in 1871. One line New York U.S. America address on top of the barrel, "COLT/PATENT" on the left side of the frame and "44 CAL" on the left trigger guard shoulder. Naval battle scene on the cylinder as well as "COLTS PATENT No 878". Matching serial number on the frame. Trigger guard and back strap. The barrel has been renumbered to match. Fitted with a one piece checkered grip.

Class: Antique

Fine as assembled (renumbered replacement barrel), which retains 90% original blue finish with some minor pitting. 50% of the refinished blue finish remains on the cylinder and back strap, and there is some scattered minor pitting on the cylinder and a smooth gray patina on the balance of the back strap. Traces of original bright case colors remain mixed with some touched up areas on the remaining metal surfaces. 20% of the original age darkened silver retains in protected areas of the trigger guard with a pleasant aged patina on the balance. The very good grip has numerous age cracks on the bottom and areas have darkened with age. The markings and cylinder scene are clear. The action is fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Documented New York Engraved, Silver and Gold Plated Colt Model

Lot # 1270 (Sale Order: 271 of 1003)      

Documented New York Engraved, Silver and Gold Plated Colt Model 1862 Conversion Revolver with Tiffany Style Grips

Colt Model 1862 conversion revolver manufactured in 1872. This revolver has New York style engraving that was probably executed by Louis D. Nimschke for Schuyler, Hartley & Graham with silver plated and gold washed finish and is fitted with Tiffany style grip. This revolver is extensively illustrated and described in detail on pages 290-291 of "Magnificent Colts, Volume II" by R.L. Wilson. The highly detailed silver plated bronze "Mexican Eagle" pattern grips feature the Mexican eagle and serpent motif from the Mexican coat of arms in relief beneath a small oval presentation escutcheon flanked by relief vines and scrollwork. The barrel, ejector housing, cylinder, frame, loading gate, trigger guard and hammer are profusely engraved with tight scrollwork on a punch-dot background. The ends of the wedge and the frame screws are fully engraved. The engraving on the left side of the barrel features an eagle head surrounded by scrollwork, and the right side is engraved with a snarling cat head. The top of the barrel is roll-stamped with the legend "ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA" in an engraved panel formed by double lines with a scrollwork flourish at the muzzle end. "COLTS PATENT" is engraved in a flowing ribbon on the left side of the frame. The serial number is located on the bottom of the barrel lug, frame, and trigger guard. The barrel, frame, loading gate and trigger guard are silver plated, and the ejector housing, cylinder, hammer, and trigger have a gold washed finish.

Class: Antique

Very fine as restored/replated overall. The revolver retains nearly 90% of the silver plated and gold washed finish. The gold finish is thin on the high points of the ejector housing, cylinder, and hammer, and there is some finish wear on the bottom of the trigger guard and grip strap. The highly detailed Tiffany style grip has some spotting on the escutcheon plate and butt but remains in very fine condition. The intricate and flawless engraving remains crisp and sharp. Formerly of the Robert M. Lee Collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 17,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce Colt U.S. Contract 3rd Model Dragoon Percussion Revolver

Lot # 1271 (Sale Order: 272 of 1003)      

Scarce Colt U.S. Contract 3rd Model Dragoon Percussion Revolver with Long Range Rear Sight and Four-Screw Frame

Manufactured in 1858, this late-production 3rd Dragoon Revolver features the four-screw frame, slotted recoil shields and back strap for a detachable shoulder stock. A folding leaf, long range, rear sight is fitted to a dovetail on the barrel flat. The top of the barrel flat is roll-stamped: "-ADDRESS SAML COLT NEW-YORK CITY-". The cylinder is roll-engraved with the Ranger and Indian scene and "MODEL U.S.M.R./COLT'S PATENT". The left side of the frame is roll-stamped: COLTS/PATENT/US". "C" Ordnance sub-inspection markings on the barrel lug, cylinder and trigger guard. A "L" Colt sub-inspection mark stamped on the left front trigger guard bow and "M" sub-inspection marks are stamped on the left side of the trigger guard and the top of the back strap. Very faint Ordnance rectangular inspection marks with script initials on the sides of the grip. The full serial number is located on the barrel, cylinder, trigger guard and back strap. The partial serial number "7255" is stamped on the correct case colored loading lever and cylinder arbor pin. The wedge is not serial numbered. Only 1050 of these late four screw 3rd Model Dragoon Revolvers were purchased by the Ordnance Department from 1857-1860.

Class: Antique

Very good plus. The revolver has an attractive mottled silver-gray patina. The metal surfaces show scattered light pitting and age discoloration with minor dents and scratches. Most of the cylinder scene is clearly visible. The serial numbers, barrel and frame markings and Colt and Ordnance sub-inspection marks are strong. The cylinder pins are battered. The rear of the cylinder, percussion nipples, hammer and hammer slot have moderate-heavy flash pitting. Traces of original case colors present on the loading lever. The brass trigger guard is in very good condition with clear Colt and Ordnance sub-inspection marks. The walnut grip is in very good overall condition with moderate handling wear. The inspector's and sub-inspector's stamps are visible on both sides of the grip. The rear sight leaves are not numbered; the rear sight may be a replacement. All other components appear to be original to the revolver. The action is fully functional. This is a solid and very original example of a seldom encountered U.S. Contract Colt 3rd Model Dragoon Revolver with four-screw frame and folding leaf rear sights. An impressive U.S. martial Colt 3rd Model Dragoon revolver in solid original overall condition.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Desirable U.S. Inspected 44 Caliber Gang Mold

Lot # 1272 (Sale Order: 273 of 1003)      

Desirable U.S. "AHK" Inspected Civil War .44 Caliber Gang Mold

These gang molds were supplied on government orders at an estimated ratio of one per 50 revolvers. A large domed hinge pin secures the iron sprue-cutter and six round blocks. The conical chambers have grease grooves. The right block is marked "44H" at the joint, which refers to 44 Holster (revolver). Both arms are stamped with the inspector initials "A.H.K.," and the brass hardware for the right wooden handle is marked "192."

Class: Other

Very fine with areas of faded original blue finish remaining with the balance a mixed gray patina. The wooden handles have some minor dings and a patch of unknown residue. A beautiful U.S. inspected gang mold for your antique military arms collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1848 Baby Dragoon Percussion Revolver

Lot # 1273 (Sale Order: 274 of 1003)      

Colt Model 1848 Baby Dragoon Percussion Revolver

Manufactured from 1847 to 1850, the Baby Dragoon was only produced for four years before being replaced by the Model 18 Pocket. This example was manufactured during 1848. Five-shot cylinder with the Ranger and Indian fight scene roll engraved. Brass blade front sight on octagon barrel marked "ADDRESS SAML COLT/ NEW YORK CITY" flanked by dashes. Round cylinder stops, squared-back trigger guard and short trigger. There is no provision for a loading lever. Full serial number appears on the barrel, frame, trigger guard and butt. The wedge is very tight, and the writer did not want to force it out to check for a number. Fitted with smooth one-piece walnut grips.

Class: Antique

Good with the metal surfaces exhibiting a mottled silver patina. The brass retains strong traces of silvered out plating on the butt and area around the trigger guard. The grips are very fine with some minor handling marks and a couple of moderate pressure dents. The markings are clear. The cylinder engraving has worn smooth. Mechanically fine. Previously from the Will Hoffeld collection, purchased from Dexter Arms in Sept. 1959.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,000.00

You've been outbid  to F****6! to YOU!

Placing your bid. please wait...

Colt London Model 1851 Navy Percussion Revolver

Lot # 1274 (Sale Order: 275 of 1003)      

Colt London Model 1851 Navy Percussion Revolver

Manufactured in 1856 with "-ADDRESS COL. COLT LONDON-" barrel marking and iron grip frame. British "crown/letter" proofs are found on the cylinder between the chambers and barrel lug (left side). The left side of the frame is marked "COLTS/PATENT." The cylinder has an naval battle scene. Matching numbers are found on the barrel, frame, trigger guard, back strap, cylinder, loading lever, wedge, and arbor pin.

Class: Antique

Very good plus. Traces of original blue finish and darkened original case colors remain, otherwise the revolver has a smooth dark patina. Nearly all of the cylinder scene remains. The grip is very good with a small missing chip on the bottom left side, some minor-moderate dings and scratches, and crazed original varnish. Mechanically fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 11 of 41

1.178.0.771.56c32e2.9.193