Premiere Firearms Auction - Day 2

Premiere Firearms Auction - Day 2

Saturday, September 8, 2018  |  9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 2

Premiere Firearms Auction - Day 2

Saturday, September 8, 2018  |  9:00 AM Central
Auction closed.
Internet Premium: 21.5%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Share:

Description

Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 15 of 41

S&W irst Model Single Shot Pistol, Factory Letter, Holster

Lot # 1350 (Sale Order: 351 of 1003)      

Excellent Smith & Wesson First Model Single Shot Pistol with Factory Letter and Holster

The accompanying factory letter lists this pistol with a 10 inch barrel in .22 LR, nickel finish, and checkered black hard rubber extension target grips when it was shipped to Hartley & Graham Co., New York City on September 28, 1899. Matching serial numbers on the front grip strap, right grip panel, barrel, and barrel latch. Comes with an unmarked leather holster.

Class: Curio & Relic Handgun

Excellent. The pistol retains 98% plus original nickel finish showing some light minor handling marks. Good original case colors remain on the hammer and trigger guard. The grips are fine with a hairline crack near the top (right panel), a few minor handing marks, and crisp checkering overall. Mechanically excellent. The holster is fine showing some minor handling/storage marks and tight stitching.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Engraved S&W 2nd Model .38 Double Action Revolver, Letter

Lot # 1351 (Sale Order: 352 of 1003)      

New York Engraved Smith & Wesson Second Model .38 Double Action Revolver with Pearl Grips, Box and Factory Letter

The accompanying factory letter lists this revolver with a 3 1/4 inch barrel, nickel finish, and checkered hard rubber grips when shipped on April 30, 1881, to M.W. Robinson Co., New York City. The engraving and pearl grips were likely added by the Robinson Co. to fill a special order. The revolver features near full coverage engraving consisting of floral scrollwork, vines and zig zag line and dot motifs. Matching numbers on the butt, barrel, barrel latch, and cylinder. The period factory box features a correct model end label.

Class: Antique

Very fine, retaining 90% of the nickel finish with flaking on the balance. The grips are very fine with a short hairline crack (right panel) and some scattered handling evidence. Mechanically excellent. The box is fine showing some minor wear, stains, and a repaired corner. Nearly all of the end label remains.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,400.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Engraved Smith & Wesson 4th Model .32 Double Action Revolver

Lot # 1352 (Sale Order: 353 of 1003)      

Factory Engraved Smith & Wesson 4th Model .32 Double Action Revolver with Pearl Grips

Manufactured from 1883 to 1909. Featuring Oscar Young's floral scroll engraving in the standard factory pattern on a punch dot background covering around 40% of the surface. Matching numbers are on the frame, barrel, barrel latch, and cylinder.

Class: Antique

Excellent factory engraved, retaining 98% nickel finish showing faint wear. 95% case colors remain on the hammer and trigger, and some original blue finish remains on the trigger guard. The replacement grips are fine with minimal handling evidence. Mechanically excellent. A beautiful engraved small frame S&W DA!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce Smith & Wesson 1st Model Ladysmith Double Action Revolver

Lot # 1353 (Sale Order: 354 of 1003)      

Scarce Smith & Wesson 1st Model Ladysmith Double Action Revolver with Pearl Grips

Manufactured from 1902 to 1906. Smith & Wesson only manufactured approximately 4,575 1st Model Ladysmith revolvers. The top of the barrel is marked with the two line address/patent dates flanked by Maltese crosses, caliber marking on left barrel side, and S&W Trade Mark logo on left side of frame. Nickel finish, blue hammer and trigger, and fitted with smooth pearl grips with gold S&W medallions.

Class: Curio & Relic Handgun

Very good. The revolver retains 90% original frosted nickel finish with some high edge wear and scattered minor flaking. The hammer and trigger have a smooth dark patina. The grips are excellent with light handling marks. The markings are crisp and clear. The action is fine.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,300.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Excellent Smith & Wesson 2nd Model Ladysmith Double Action Revol

Lot # 1354 (Sale Order: 355 of 1003)      

Excellent Smith & Wesson 2nd Model Ladysmith Double Action Revolver

Manufactured between 1906 and 1910 and features the pull forward cylinder latch located under the barrel, blade and notch sights, standard two line address/patent dates marked on top of the barrel, "22 S&W CTG." flanked by Maltese crosses on the left side and the S&W logo on the left side of the frame. Blue finish with casehardened trigger and hammer and fitted with checkered grips with "S&W" logo at the tops.

Class: Curio & Relic Handgun

Excellent. The revolver retains 95% original blue showing some thinning to a brown with a brown and gray patina mixed with original blue on the trigger guard. The hammer and trigger retain some strong vivid original case colors. The grips are also excellent with overall crisp checkering. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine Smith & Wesson Third Model Ladysmith Double Action Revolver

Lot # 1355 (Sale Order: 356 of 1003)      

Very Fine Smith & Wesson Third Model Ladysmith Double Action Revolver with Purse Holster

Manufactured from 1911-1921 with a total production of 12,203. The last serial number was 26,154 making this revolver one of the last 144 to be made. Built on the square butt M frame with 5 screws. The top of the barrel is marked "+SMITH & WESSON SPRINGFIELD MASS. U.S.A./PAT'D AUG. 4 96. OCT. 9. 01. NOV. 10. 03. FEB. 6. 06. SEPT. 14. 09+" with caliber designation on the left side, and the matching serial number is marked on the butt, rear cylinder face and underside of the barrel. Pinned blade front sight, adjustable rear sight, nickel finish with casehardened hammer and trigger. Comes with a leather purse holster.

Class: Curio & Relic Handgun

Very fine. The revolver retains 98% original nickel finish with some minor flaking on the muzzle, some light frosting developing, a cylinder drag line and light scratches. The grips are excellent with a few minor pressure dents and handling marks. The markings are crisp and clear. The action is excellent. The purse holster is good with heavy wear on the exterior.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,200.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Russian Contract S&W No. 3 Russian 1st Model Revolver

Lot # 1356 (Sale Order: 357 of 1003)      

Rare First Issue Russian Military Contract Smith & Wesson No. 3 Russian 1st Model Single Action Revolver

Smith & Wesson manufactured 20,000 No. 3 Russian 1st Models for the Russian government in their own serial number range (1-20000), and they are almost non-existent in U.S. collections today. This revolver has the added rarity of being one of only three known (serial numbers 211, 383, and 438) of the initial issue of approximately 500 revolvers that are fully serial numbered as well as assembly numbered. Note that no. 211 is also in this auction. The barrel rib has the S&W Cyrillic marking followed by the double headed Russian eagle and inspector initials "KO" for Captain Kasavery Ordinetz. Matching assembly numbers (“18”) are on the grip frame, barrel latch, barrel, and cylinder. The right grip panel is numbered to the gun. For more information see www.russianrevolvers.com. Provenance: Joe Leiper Collection.

Class: Antique

Very good, retaining 30% original blue finish on the frame and barrel and some original blue in the cylinder flutes with the balance a mottled brown-gray patina. The barrel has been shortened to 6 1/2 inches from its original 8 inch length, and the front grip strap shows signs of being cleaned. The grips are fine with a minor crack near the top (left panel) and minor handling evidence. Mechanically needs work as action does not always cycle correctly. Do not miss your opportunity to obtain this rare variation of a 1st military contract No. 3 Russian that is missing from the most advanced S&W collections.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Russian Contract Smith & Wesson No. 3 Russian 2nd Model Revolver

Lot # 1357 (Sale Order: 358 of 1003)      

Scarce Russian Military Contract Smith & Wesson No. 3 Russian 2nd Model Single Action Revolver

Smith & Wesson manufactured 70,000 of these revolvers for the Russian government. The barrel rib has the S&W Cyrillic marking followed by the serial number, a double headed Russian eagle, Russian inspector initials for N. Kushakevich, and a late production Russian acceptance proof. Matching serial numbers are found on the butt, right grip panel, cylinder, barrel (on rib), and barrel latch. For more information see www.russianrevolvers.com. Provenance: Joe Leiper Collection.

Class: Antique

Good, having a mixed gunmetal gray patina and minor pitting. There is a series of tool-like markings on the underside of the barrel. The grips are very good showing some minor dings and scratches. The action cycles, but the cylinder does not lock properly when the hammer is fully cocked.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Russian Contract Smith & Wesson No. 3 Russian 3rd Model Revolver

Lot # 1358 (Sale Order: 359 of 1003)      

Rare Russian Military Contract Smith & Wesson No. 3 Russian 3rd Model Single Action Revolver

This is the third and final "Russian Model" type revolver Smith & Wesson delivered to the Russian government. A total of 41,138 units were manufactured. The barrel rib has the S&W Cyrillic marking (lacks a serial number) followed by a double headed Russian eagle, and Russian inspector initials "KO" for Captain Kasavery Ordinetz. The left side of the frame has the Russian "1874" marking. The Russians referred to these revolvers as the "Cavalry Model" or "1874 Model." The right grip panel, cylinder, barrel (in latch cut out), and barrel latch are numbered to the gun. For more information see www.russianrevolvers.com. Provenance: Joe Leiper Collection.

Class: Antique

Very good plus, retaining 40% original blue finish on the frame and barrel, otherwise a smooth brown-gray patina. Visible original case colors remain on the hammer and trigger guard. The grips are good with a number of minor-moderate dings. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

S&W Model 3 Russian Commercial Reissue Revolver, Letter

Lot # 1359 (Sale Order: 360 of 1003)      

Scarce Smith & Wesson Model 3 Russian Third Model Commercial Reissue Revolver with Factory Letter

Manufactured from 1874 to 1878, this commercial example is hand stamped "REISSUE/JULY 25, 1871" at the end of the barrel rib marking. The "REISSUE" marking is rare and was added after the W.C. Dodge patent was reissued and the factory had purchased it from Dodge. The factory letter lists this revolver with the "REISSUE" marking, 6 1/2 inch barrel, blue finish, butt swivel, and smooth walnut grips when shipped on December 15, 1876, and delivered to Schuyler Hartley & Graham Co., New York City. The butt has a boxed "1874" over the serial number along with a small "P." Marching assembly numbers appear on the grip frame, barrel, and barrel latch. The right grip panel is numbered to the gun.

Class: Antique

Fine. The revolver retains 65% original blue finish on the frame and barrel with the cylinder a smooth brown-gray patina. 40% original case colors remain on the hammer and trigger guard. The grips are fine with some minor-moderate handling evidence. Mechanically excellent. A solid example of a scarce S&W Model 3 Russian Revolver with "REISSUE" marking.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Tula Arsenal S&W No. 3 Russian 3rd Model Revolver

Lot # 1360 (Sale Order: 361 of 1003)      

Rare Early Production Russian Military Tula Arsenal No. 3 Russian 3rd Model Revolver

Production of these revolvers started around 1886 after the tooling was purchased from Ludwig Loewe. Although approximately 35,000 were manufactured, these revolvers saw hard use and had a low survivability rate, making them very rare in the U.S. and reportedly just as rare in Russia. Offered here is an early example with the first year production two-digit serial number "37" and markings. It has the Tula Arsenal Cyrillic marking on the barrel rib which includes the manufacture date "1886," the serial number, double headed Russian eagle, and Russian inspector initials N. Kushakevich. The cylinder is also numbered to the gun. For more information see www.russianrevolvers.com. Provenance: Joe Leiper Collection.

Class: Antique

Very good plus, retaining 30% original blue finish on the barrel and frame and strong traces of original blue finish on the cylinder flutes with the balance a gray patina. There are a couple dings on the barrel and a couple patches of minor pitting. The grips are fine with some minor dings and scratches. Mechanically excellent. A solid first year production Tula Arsenal No. 3 Russian that will be a welcome addition to any Russian military or S&W collection.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Russian Contract Ludwig Loewe S&W No. 3 Russian Revolver

Lot # 1361 (Sale Order: 362 of 1003)      

Rare Russian Military Contract Ludwig Loewe & Company No. 3 Russian 3rd Model Single Action Revolver

Production of these revolvers started as early as 1876 when the Russians decided to move No. 3 Russian revolver production from S&W in America to Ludwig Loewe in Berlin. Revolvers produced in Germany didn’t need transatlantic shipment, so the supply of revolvers was less likely to be disrupted. In addition, S&W had also angered the Russians by selling arms to Turkey and Japan, enemies of Imperial Russia. The barrel rib has the Ludwig Loewe Cyrillic marking followed by the serial number, the double headed Russian eagle, and a late Russian acceptance proof. The left side of the frame has the Russian "1874" marking. The right grip panel is numbered to a different gun. The cylinder is numbered to the gun. For more information see www.russianrevolvers.com. Provenance: Joe Leiper Collection.

Class: Antique

Very good, retaining 20% original blue finish on the barrel and frame and strong original traces of original blue finish on the cylinder flutes with the balance a smooth brown-gray patina mixed with some minor to moderate pitting. The very good replacement grips are slightly undersized and have some moderate dings. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Springfield Armory John Garand Presentation M1-Garand

Lot # 1362 (Sale Order: 363 of 1003)      

Well Documented, Historic National Treasure One of a Kind U.S. Springfield Armory M1 Garand "Milestone" Serial Number "1,000,000" Presented to the Inventor John C. Garand with Presentation Inscribed Display Case, Plated and Gilt En Bloc Clip and Cartridges and John C. Garand Archive

This is absolutely the apex of any advanced M1 Garand rifle collection or any high end martial arms collection. This is the exact, original M1 Garand milestone serial number "1000000" that was authorized for presentation to John C. Garand and given to him at his retirement ceremony on April 30th, 1953, at the Kimball Hotel in Springfield, Mass. It was manufactured in November of 1942. The name John C. Garand needs no introduction to anyone that is remotely familiar to the U.S. martial firearms or any WWII historical facts. Every Army, USMC, Navy and Air Force veteran from WWII through Vietnam and well beyond intimately knows how wonderful and significant this rifle design was and that it ultimately helped save the United States, Europe, and the free world during WWII. His rifle design and U.S. Government service work was so significant that the M1 Garand is still in use by thousands of collectors and rifle enthusiasts who flock to Camp Perry for the annual High Power rifle matches today that bear his name. The M1 is highly regarded as one of the most prolific and collectible rifles, even today, almost 80 years after its development. This beautiful rifle is pictured and described in the book "The M1 Garand rifle" by Canfield on pages 815-822. During his lifetime, John Garand only received his standard government salary, selflessly allowing the U.S. Government to manufacture these rifles with no royalty payments. An included letter from Dorothy Jerome of Helena, Montana, expressed her wish to contribute to Garand’s “share of what is due…for his invention of the M1” by personally sending Garand a check for $1.00. The check is uncashed. In 1973, the U.S. Congress introduced a bill to award Garand $100,000 for his service related to the development of the M1. The bill did not pass. This rifle was manufactured in early Oct/Nov 1942. It has the standard receiver markings over serial number "100000". The barrel is stamped on the side “S-A-10-42.” The rifle has the following correct parts: op rod ("D35382-6 SA," unmodified), bolt ("D28287-12/A8W"), trigger housing ("D28290-8-SA"), milled trigger guard and hammer ("C-46008-3 SA"), and all internal action parts. It is fitted with a WWII narrow gas cylinder, front sight with the screw cover intact, the round top gas cylinder lock, single slot gas plug, and a set of the WWII locking bar rear sights. The rifle is mounted in the most beautiful, highly figured, regular production M1 Garand stock and handguard sets we have ever seen. It has full fiddleback/flame figure from the front of the handguard to the buttplate. The stock has a faint boxed "SA" cartouche followed by a faint cross-cannon inspection/acceptance proof. This beautiful and historic rifle comes with its original inscribed walnut presentation/display case that measures 9 x 46 inches and has a green felt interior. The top of the lid has a small brass plaque that reads: "PRESENTED TO/JOHN C. GARAND/BY AUTHORITY OF/THE SECRETARY OF THE ARMY/ROBERT T. STEVENS/APRIL 30, 1953". It comes with a presentation silver plated clip inscribed “SPRING DIVISION/BORG-WARNER CORP.” and “John Garand/April 30 1953” holding 8 gold plated dummy cartridges each inscribed with a name of an associate (Jack Becker, Adolph Bergetz, Dan Gillespie, Pat Gillett, Jim Niblick, Bill Schumacher, Harry Troendly, and Art Welch), retirement banquet program and photo album, 8x10 inch photograph of Garand holding this rifle at his retirement party, and other John Grand personal effects such as his guest name tag for the Merchants Bureau Breakfast Club, American Society for Metals medal presented in Oct. 1941 with framed certificate, The Rice Medal for Meritorious Service presented in Nov. 1941 with framed certificate, framed honorary doctorate of engineering from Lehigh University presented in 19, his Springfield Armory photo ID with his signature on the back, health insurance and retired federal employee cards, Christmas/New Year card with 1923 post office date on the envelope, drafting set, Garand’s induction to the Ordnance Hall of Fame letter, Garand’s bumper medallions for entry at Springfield Armory, and newspaper articles. This rifle, along with the 63rd NRA President Allen Cors, is featured on the cover of the "Blue Book of Gun Values" (36th edition). A copy of this edition is included and is signed by Cors and author S.P. Fjestad. This rifle was also featured in “The American Society of Arms Collectors” (bulletin #101) and “American Rifleman” (July 2009). These issues are also in this lot. The rifle won the Ten Best Arms Exhibited at the NRA Award in 20
more...

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 250,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Springfield Armory U.S. - 1924 Garand Autoloading Rifle

Lot # 1363 (Sale Order: 364 of 1003)      

Historic and Extremely Rare Prototype U.S. Springfield Armory Garand Primer-Actuated Semi-Automatic Rifle

This is an extremely rare example of a very early experimental primer-actuated Garand semi-automatic (or autoloading) rifle. This model was eventually finalized as the Model 1924; however, it is typically called a Type 2 Garand as it was the second primer-actuated semi-automatic rifle designed by John Garand. This was a very unique and unusual concept rifle. Up until then, all cartridges used a flat indented primer that fit into a primer pocket in the base that was struck by a forward moving firing pin. In this primer-actuated design, the firing pin is actually somewhat larger than today’s and is cupped shaped and has the fixed firing pin tip in the center. When the rifle was fired, the round, non-rotating bolt struck the primer face and the resulting internal pressure of the case would have actually forced the primer reward 2-3 thousands (called primer set-back). This set-back would in turn force the firing pin rearward slightly (like a tappet) to assist/start to unlock the bolt and then the resulting extraction, ejection and reloading sequence. This rifle was NOT a turn bolt rifle design like the earlier model T1920; instead, it had a tipping bolt design where the rear of the bolt was locked up into the receiver, which actually allowed the primer actuated design to functional properly. In looking at this design, it seems rather complex in comparison to everything after, but it worked satisfactorily. It is estimated that 25 of these second models were manufactured in three different barrel configurations with different stock configurations. Eventually, the evaluation board standardized on a single stock and barrel configuration (24 inches like the 1903), and all of the examples were sent to infantry and cavalry units for field testing. The design again proved to be completely successful, allowing it to fire approximately 100 rounds in succession without any stoppages. However, in 1925 the Army threw John Garand a curve ball by adopted the new .30 Ball cartridge M1 as the new standard rifle ammunition in lieu of the old .30 Model 1906 cartridge. The major issue was the new cartridge used a totally different rifle powder called IMR powder, which stood for Improved Rifle Powder that is still in use today! Consequently, Garand completely abandoned this rifle design, leaving these 25 rifles as the only link to the final M1 Garand rifle design. This rifle is marked on the receiver ring: "GARAND/AUTOLOADING/RIFLE". It has the final 24 inch barrel, internal magazine (like the 1903 rifle), and a walnut stock design with a full length forend and top handguard and a separate buttstock. The barrel, front sight and barrel bands are all similar in design to the 1903 rifle. This is certainly a very rare and uniquely designed rifle that explains the direct lineage of the M1 Garand rifle. The consignor has stated that this rifle actually came from the John Garand's basement and the accompanying accessories (small notebook which is mostly blank, “U.S.” marked combination tool, front sight adjusting tool from this rifle, box of Frankford Arsenal 30-06 cartridges used for testing this rife, and a bottle of Plastilube) are from Garand’s personal collection. Note the box of cartridges (17 rounds) is dated Jan. 1923 and is marked “FOR EXPERIMENTAL DEPARTMENT/SPRINFIELD ARMORY” and “GARAND” and the Plastilube comes in a shipping container addressed to “J.C. Garand/Research & Development.” The rifle is pictured and described in Bruce Canfield’s “The M1 Garand Rifle” on page , Billy Pyle’s “The Gas Trap Garand” on page 29, and Maj. Gen. Julian Hatcher’ “The Book of the Garand” on page 70. The rifle won the Ten Best Arms Exhibited at the NRA Award in 2009, and the NRA medal for this honor is included.

Class: Curio & Relic Long Gun

Fine with considerable blue loss on the exposed metal surfaces and light erosion/pitting on the receiver and around the exposed front section of the barrel. The wood components are all fine overall and show handling marks and light pressure dents along the sides of the buttstock and wear around the edges in front of the buttplate. This rifle appears to actually be one of the so called "test" rifles and to have been retained by Garand after the testing was completed. This is extremely rare as most examples were reportedly destroyed after all the testing was complete. This rifle is a very rare and pivotal example of the direct lineage which lead to the final M1 Garand rifle design.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 150,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt - 1900

Lot # 1364 (Sale Order: 365 of 1003)      

Exceptional Documented U.S. Navy Contract Colt Model 1900 "Sight Safety" Semi-Automatic Pistol Serial Number 1104

This is an exceptional, rare early production original Colt Model 1900 U.S. Navy contract sight safety pistol. These pistols are very rare and desirable as they were the very first original 250 Colt contract, Model 1900 semi-automatic pistols procured for the US. Navy under a U.S. Government contract. These pistols had a very unique rear sight safety that blocks the hammer when engaged with all being chambered in the Colt 38 Auto Rimless cartridge. Examples in this original, unaltered condition are extremely rare as this cartridge proved to be very weak in stopping power and 99% of the sight safety models were changed into a fixed rear sight. All of these were eventually replaced in favor of the later Model 1905 and eventually the Model 1911 in 45 ACP. This pistol is listed on page 39 of the book: "U.S. Military Automatic Pistols 1894-1920" by Scott Meadows. These pistols were all shipped in 1900 in five lots to the U.S. Government General Storekeeper, Navy Yard, Brooklyn, New York. This specific pistol was shipped in the third lot of pistols on Oct 22nd, 1900. The right side of the frame is marked with Colt serial number "1104", and the Navy serial number "USN 104" on the left side. The left side of the slide has the two-line, two-block markings of: "BROWNING'S PATENT/PAT'D APRIL 20.1897" followed by "COLT'S PATENT FIRE ARMS MFG. CO/HARTFORD. CONN. U.S.A.". The right side is marked: "AUTOMATIC COLT/CALIBRE 38 RIMLESS SMOKELESS". A small circled Rampant Colt is stamped on the left side behind the slide serrations. A small Navy trident inspection mark is stamped on the right side of the trigger guard bow, with the Colt proof mark on the left side that consists of a capital letter "B" inside a small triangle, as used by Navy Lt. Charles A. Brand. The magazine is correctly nickel plated with the floor plate correctly stamped "PAT'D SEPT. 9. 1884". The metal parts feature beautiful Colt high polish commercial blue finish with niter blued finish on the trigger and stock screws and color casehardened finish on the sight safety and hammer. Fitted with smooth dark walnut grips with brass escutcheons.

Class: Curio & Relic Handgun

Excellent with 97% plus of the bright original high polish blue finish showing some very small nicks and handling marks in the blue finish overall. The hammer and rear sight retain 98% vivid original case colors. The grips are very fine with 85% of their original varnish finish with both sides showing numerous typical light handling marks and pressure dents overall. The markings are clear, sharp and distinct. The various handling marks and light nicks overall are strictly from poor handling and shipping by the Navy; without those, the pistol would be like new condition. A really super nice top condition U.S. Navy contract Colt Model 1900 semi-automatic pistol.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 16,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Winchester - 12

Lot # 1365 (Sale Order: 366 of 1003)      

Absolutely Outstanding As-Issued World War II U.S. Army Contract Winchester Model 12 Trench Shotgun with Winchester Box

This is an absolute time capsule of a rare, late WWII, all parkerized Winchester Model 12 Trench Gun manufactured in 1945. This example is completely cased in the original long-term cosmoline preservative on the metal components and as noted is complete with the original Winchester factory cardboard shipping box correctly marked and numbered to this shotgun. Based on the serial number this is one of the very last ones produced, and it is in stunning original condition. The Winchester Model 12 and Model 97 trench shotguns were the primary U.S. combat shotguns used in WWII and Korea and even into Vietnam by both the Marine Corps and U.S. Army. Original, unaltered WWII examples are extremely rare today given almost all were rebuilt and reparkerized over time. The cosmoline preservative covers all the way from the muzzle to the rear of the receiver and slightly on the buttstock. It thick and heavy. Looking through the grease, the barrel is roll stamped with the two line Winchester address/patent dates followed by "-WINCHESTER-/-TRADE MARK-" and "MODEL 12-12 GA.-2 3/4 CHAM./CYL." The top breech end of the barrel has a barely readable small Ordnance Dept. "Shell and Flame" insignia. Both the barrel and front edge of the receiver are stamped with the circled Winchester "WP" factory proofmark. The right front end of the receiver is also roll stamped with the Ordnance "Shell and Flame insignia/U.S." This shotgun is fitted with a walnut stock and pump handle, and the left side of the stock is stamped with the boxed Ordnance "G.H.D." inspection mark and a small 1/4 inch U.S. Ordnance Escutcheon stamped below that. The serial number, "1035200", is roll stamped on the underside of the barrel extension and receiver. The ribbed forearm is covered in cosmoline, and the buttstock has a dry oil type finish and a black checkered hard rubber buttplate with the circular Winchester logo. The shotgun is fitted with the WWII pattern four hole, heat shield/bayonet lug. Interestingly the screws for the heat shield are not screwed all the way in, but they are covered with original cosmoline, same as the rest of the shotgun. The stock has a sling swivel and the larger bail wire sling swivel located on the bayonet lug. The lower sling swivel still retains the original small aluminum serial number tag from the Winchester factory that is stamped "1035200". As noted, this wonderful shotgun comes with the original cardboard factory shipping box with the original Winchester Model 12 label on the end with a non-matching serial number written in pencil, that has been crossed out. The matching serial number (1035200) has been written in pencil on the top of the lid. The box also includes the original instruction manual inside along with some of the original US Army preservative wrapping paper.

Class: Curio & Relic Long Gun

Absolutely as issued and unfired with 99.9% of the original WWII/Winchester parkerized finish remaining overall under the cosmoline. The pump handle, as noted, is also covered with the cosmoline, so its like new, and the buttstock is also in like new condition with a crisp cartouche. The box is also in excellent condition. This is a real treasure trove for the U.S. martial arms or trench gun collector and is probably the only one still in existence like this!

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 12,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Outstanding and Impressive World War II U.S. M3A1 Scout Car

Lot # 1366 (Sale Order: 367 of 1003)      

Outstanding and Impressive World War II U.S. M3A1 Scout Car

Introduced in 1940, the M3A1 was an improved version of the M3 and was the main production variant by White Motor Company. The vehicle was primarily used by WWII cavalry and reconnaissance units, serving actively in the Philippines and North Africa. By mid-1942, however, most were regulated to supply and ambulance work, MP and rear echelon vehicles, and were replaced by the M8 Armored Cars beginning in 1943. During the post-war years M3A1s made it into many African and Asian post-Colonial republic arsenals and in the 1948 Arab-Israeli War. The French used the vehicle in its wars in Indochina and Algeria. The lasting serving M3A1s were found in 1990 with Dominican Republic regular forces. This example features a WWII U.S. Army paint scheme and two dummy M2 Browning type machine guns on skates running a full 360 degrees around the interior of the crew compartment. An interesting feature that was seen on early half-tracks is a roller on the front that was designed to aid in cross country travel in the event of getting the nose suck in a ditch. It is outfitted with a Hercules JXD 6 cylinder inline gas engine and comes with M1917A1 tripods, pioneer tools, seat cushions, dummy Thompson type submachine gun, jerry cans, camo net, and FT 528 radio set. Consignor research is included.

Class: Other

A high quality restoration and fully operational. The quality of the body work and paint is of a very high caliber and features the unusual original aluminum tread plate flooring.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 65,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Charles Erb - M1917A1 Pattern MG

Lot # 1367 (Sale Order: 368 of 1003)      

Desirable Browning Designed, Charles Erb Manufactured M1917A1 Pattern Fully Automatic Class III/NFA Registered Medium Machine Gun with Tripod and Cradle

This is an example of a Browning designed M1917A1 pattern water cooled medium machine gun. This example was assembled/manufactured by using a set of surplus machine gun parts (probably Argentinean) that were assembled onto a new manufactured machine gun receiver produced by Charles Erb. This is a full size, fully automatic, water cooled machine gun. The right side of the receiver is marked "No. USN 7775 U.S. INSP/BROWNING MACHINE GUN/U.S. CAL .30 M1917A1/MANFD BY ROCK ISLAND ARSENAL" and towards the rear of the receiver on the very lower edge it is marked "CHARLES E. ERB FREDERICKTOWN PA. M-1919-17-37 Cal .30 USN 7775". It has the functional, green painted, full length, brass water cooling jacket, and a fully adjustable rear sight graduated to 2,700 yards. This excellent machine gun is complete with an original 1917 tripod, original cradle with integral T&E mechanism and a rubber water hose contained in a tan canvas pouch. This model was the US equivalent of the German and British Maxim machine guns used towards the end of WWI and certainly throughout the post-war years and in the early days of WWII.

Class: Class III

Very fine with 95% of the current green painted and parkerized finishes overall only light areas of wear on the edges and high spots. The tripod is also in excellent condition. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 17,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Savage Arms 1914 Lewis Gun, Registered Transferrable, Ex. Mags

Lot # 1368 (Sale Order: 369 of 1003)      

World War I Production British Contract Savage Arms Lewis Machine Gun, Class III/NFA C&R Machine Gun, Registered Fully Transferrable, with Transit Chest and a Case of Eight Extra Magazines

Developed by Issac Newton Lewis, a U.S. Army officer, the Lewis Gun was one of the lightest machine gun offerings of its era, coming in at 28 pounds with the distinctive barrel cooling assembly included. Unable to sell the gun to his superiors, Lewis resigned and took off for Belgium, where he made a tidy profit licensing the design to Birmingham Small Arms and Savage Arms. Among other distinctions, a Lewis Gun would be the first machine gun taken on a powered aircraft, and it saw very active use in World War One. This particular example was manufactured by Savage on order for Britain. Blade front and folding peep rear sights, with the Savage nomenclature and a set of small "broad arrow" and "crown" proofs on top of the receiver, a folding steel bipod clamped to the steel barrel jacket, and aluminum cooling fins surrounding the barrel. Both the pistol grip and buttstock are smooth hardwood. A green painted hardwood transit case is included, with white stenciled nomenclature "CHEST VICKERS OR LEWIS 303 IN MG MK 11B QTY I" on one side, a cleaning rod, as well as a brown painted metal case stenciled "BOX, CARRIERS MAGAZINE LEWIS .303 MACHINE GUN" in white on one side and "10th GURKHA RIFLES" on the lid, containing eight spare magazines.

Class: Class III

Fine as refurbished, showing some mild spotting and handling marks overall, along with a few areas of brown patina and about 75% of the refinished blue. The grips and stock have been revarnished, with dents and chips, and the hardwood case shows scuffs, dents and wear. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 17,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt - 1921 Thompson

Lot # 1369 (Sale Order: 370 of 1003)      

Excellent Early Production Documented Columbus Georgia Police Department Issued Colt Model 1921 Serial Number "1852" Fully Automatic Class III/NFA Thompson Submachine Gun with Drum Magazine, Accessories and FBI Case

This is an excellent example of an original, fully automatic early production Colt M1921 Thompson Submachine gun. This particular gun was manufactured very early on in the original Colt production with a four digit serial number noted to fall within a small serial numbered group of weapons sold to the Beach-Mosely Hardware Co. of Columbus, Georgia, (Jan 1923) for transfer to the Columbus Georgia Police Dept. This weapon stayed with the Columbus Police Dept. until the 1960s/70s when it was sold to a noted collector in Atlanta. This data is shown on page 231 of the book the "Colt Thompson Submachine Gun Serial Numbers" by Herigstad. It remained there until approximately 1983, when it was sold to the next owner, as explained in the accompanying letter written by Law Enforcement Ordnance Co. founder and firearms author Roger Cox. Cox's letter also indicates that this specific weapon is prominently shown in "The Thompson Submachine Gun" by Cox on the first and last pages. Approximately 15,000 sets of 1921 parts were initially produced with almost all of them being later used in the more successful M1928A1 configuration. The receiver is marked "MODEL OF 1921/10852", along with the standard five-line factory markings: "THOMPSON SUBMACHINE GUN/CALIBRE 45 AUTOMATIC COLT CARTRIDGE/MANUFACTURED BY/COLT'S PATENT FIRE ARMS MFG. CO./HARTFORD CONN. U.S.A.". The right side is marked "AUTO-ORDNANCE CORPORATION/NEW YORK U.S.A." followed by the standard five-line patent dates. Directly behind the ejection port is the circled "JHB" inspectors mark of Major John Barret. The left side, of the "matching" trigger housing is marked: "AUTOMATIC" and SEMI-AUTOMATIC" along with "FIRE and SAFE", serial numbered "1852" on the underside. This model would be considered an "A" model which identifies it as a standard grade without the patented "CUTTS" compensator on the end of the barrel, which is correct for these early models. These early Thompsons have the distinctive finned barrel, the fully adjustable Lyman tangent rear sight with sight protectors, the walnut vertical fore grip, and the detachable walnut buttstock with the butt trap which holds an original Thompson oiler. The gun is complete with a blued 50-round drum magazine, three blued 20-round stick magazines (2 Auto-Ordnance marked and 1 marked "SW-Co."), one early brass cleaning rod, and a reproduction FBI-style carrying case that houses the SMG and various accessories. Also included is an original mid to late 1940s picture of the Columbus Police Dept. showing the entire squad with Harley and Indian motorcycles and police cars.

Class: Class III

Excellent with 97% plus of its original blue finish overall with edge and high spot wear, and also on top of the receiver from the cocking handle. The wood components are also in excellent condition with a nice dark matching colored walnut showing scattered minor handling dings on the wood. Mechanically excellent. The accessories are all in excellent condition. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 55,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. M41A1 Walker Bulldog Light Tank

Lot # 1370 (Sale Order: 371 of 1003)      

U.S. M41A1 Walker Bulldog Light Tank

The M41A1 Walker Bulldog tank was manufactured by Cadillac from 1951 to 1954 and replaced the M24 Chaffee. Arriving too late for the Korean War and too early for the Vietnam War, the M41A1 never saw combat with United States military forces. The M41A1, however, saw extensive use with the South Vietnamese Army (ARVN) during the Vietnam War. In February 1971, for instance, the ARVN lost 5 of its 17 M41A1s that knocked out 22 North Vietnamese Army tanks (6 T-54s and 16 PT-76s). The M41A1 was exported to allied nations in NATO, the Middle East, Africa, and Asia. A few hundred M41A1s are still operational in Taiwan. Approximately 5,500 M41A1s were manufactured, and are rarely available for sale. This example came out of the Guatemalan military in the late 1980s. The tank retains the Guatemalan camo paint scheme. It has an operation turret, demilled breech ring and breech block, and Continental AOS-895 6 cylinder, air cooled, super charged, fuel injected, horizontally opposed engine producing 500 hp. A well-designed light weight tank, the M41A1 was well loved by the troops, and we can attest it is a joy to operate. Comes with mantlet cover, spare tack pads, two extra road wheels, and consignor research.

Class: Other

The tank runs and drives well and has Guatemalan alterations done during its time in service. The barrel and optics are good. The track is good, and the road wheels are very good.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 210,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Colt Navy 1911, 3-Digit Number, 1912 Made

Lot # 1371 (Sale Order: 372 of 1003)      

Desirable First Year Production Three Digit Serial Number Colt Model 1911 U.S. Navy Contract Semi-Automatic Pistol

This is an example of a extremely rare 1st Year U.S. Navy contract Model Colt 1911 pistol that was manufactured in 1912. These Navy marked Colt M1911s were only manufactured through the end of 1914 and into early 1915. All other Navy contracts pistols shipped after that time were fitted with the standard "U.S. Army" marked slides. This rare pistol was shipped as part of a 500 gun shipment to the U.S. Navy Yard in Brooklyn, NY, on March 1912. It has the correct early variation small diminutive serial number "No. 796" stamped on the right front end of the frame extension. The later replacement slide is stamped on the left side with the early Colt factory two line, two block address/patent marks with the Rampant Colt logo (uncircled) behind the serrations and on the right side with the noted "MODEL OF 1911. U.S. NAVY" (with serifs) markings. It has the correct early, narrow front sight blade, with the rounded top, rear sights. The frame is stamped with the intertwined initial "WGP" for Walter G. Penfield, U.S. Ordnance Inspector, along with "UNITED STATES PROPERTY" on the left side. It has a later production Colt barrel that is marked on the lower left side with "COLT 45 AUTO", with a small capital "F" stamped in front of the barrel lug with no "H" provisional stamp on the front of the barrel hood. It is fitted with the later replacement second pattern early wide spur hammer with short border-less checkering, the type 1 magazine catch, a replacement 1918 pattern thumb safety with the thick thumbpiece with smooth underside transition with no undercut, the replacement long trigger with the smooth face, replacement short grip safety, and flat mainspring housing with the lanyard loop. It has the standard checkered grips with diamond patterns around the screws. It is fitted with a later production half-blued, pinned magazine with the smooth magazine base.

Class: Curio & Relic Handgun

Fine as field upgraded with 50% of the original blue finish still remaining overall with the balance of the metal having a thinning brown patina type finish. The front grip strap does show some plumb colored oxidation with the mainspring housing showing more thinning of the blue finish. The later production replacement slide has very nice original and distinct factory markings to include the "U.S. NAVY" markings with the blue finish thinning overall with the top of the slide showing light oxidation/minor erosion, (probably from sitting in a holster). The heavily worn grips are original and show clear and distinct checkering around the edges with the center section of both grip panels showing heavier pressure dents, obviously from actual duty use. There are only a few later parts that could be replaced to restore this back to its original issue condition, or you can display it as-is as these changes were probably actually field upgrades. This is a highly desirable example of an extremely early production Colt first contract U.S. Navy issue Model 1911 service pistol.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 7,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt - Government

Lot # 1372 (Sale Order: 373 of 1003)      

Desirable First Year 1912 Production Colt Government Model Semi-Automatic Pistol with Low Four Digit Serial Number C1170 and Factory Letter

This is a very fine example of an early production Colt Government Model pistol that was manufactured late in 1912. This was the first year Colt offered the "Government Model" pistols for sale. These pistols had the Colt high polish commercial blue finish with the fire blue trigger, hammer, slide lock, safety lock and rear sight until mid-1913 when Colt went to a slightly more subdued finish. The factory letter confirms the basic configuration (grips not listed) and that it was part of a pair shipped to Hackett, Gates, Huntry Hardware Co. in St. Paul, Minnesota, on September 27, 1912. It is fitted with checkered walnut grips with the larger diamonds around the grip screws. It retains its original sights with the narrow tapered, oval front sight and round top rear sight. It has the correct short hammer with the borderless checkering and sharp rear edge, first style checkered slide stop, thin, checkered thumb safety and third pattern magazine release lock. It has the first pattern recoil spring guide and cap. It is fitted with the early all blued barrel that has a rough milled finish on the back end of the barrel (chamber area and underside) and the high polished finish on the front end. The barrel is stamped with only a "5" on the underside over stamped with a letter "N". The pistol comes with a second pattern, Colt, two-tone punch and saw cut magazine with a lanyard loop on the underside of the base plate. The right side of the frame ahead of the trigger guard is roll-stamped "GOVERNMENT MODEL". The left side is stamped with the small serial number "C1170". The top of the frame is stamped with "4" and "S" inspection marks in front and behind the disconnector hole. The right side of the slide is roll-stamped with the early "COLT AUTOMATIC/CALIBER 45" below the ejection port. The left side of the slide is roll-stamped with the correct two-line Colt patent dates that ends in 1911 followed by the Colt Hartford two-line address block. The circled Rampant Colt is roll stamped on the left side of the slide behind the slide serrations, which is correct.

Class: Curio & Relic Handgun

Very fine with 70% of the bright original factory high polish blue finish remaining, blue loss visible on the edges and high spots overall, the sides of the slide on the transition lines, muzzle area and front area of the frame. The front grip strap, main spring housing and rear edges of the frame show a sliver gray patina finish. 60% bright original niter blue remains on the small parts. The grips are both in fine condition with nice sharp distinct checking on both sides showing only minor handling marks. The "keyhole" style loop magazine is dented in both sides near the center. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. US&S Model 1911A1 Pistol, 1943 Production

Lot # 1373 (Sale Order: 374 of 1003)      

U.S. Union Switch & Signal Model 1911A1 Semi-Automatic Pistol

Manufactured in 1943. Blade and flat top notch sights, the "USS" monogram and "U.S. & S. Co./SWISSVALE, PA. U.S.A." on the left side of the slide, a Robert Downie "RCD" inspected frame, a thin checkered hammer, short milled trigger, long grip safety, arched checkered mainspring housing, reinforced grips (Colt left, Keyes Fiber right), full blue unmarked magazine and a High Standard barrel.

Class: Curio & Relic Handgun

Fine with 50% of the faded Du-Lite finish, a brown patina on the grip straps, mixed brown and gray on the slide, bright edge wear, a few dings on the underside of the frame, and scattered spotting and handling marks. The grips are very fine with a few dings and dents. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

U.S. Ithaca/Remington-Rand 1911A1, Ex.Mags, Box

Lot # 1374 (Sale Order: 375 of 1003)      

U.S. Ithaca/Remington-Rand Model 1911A1 Semi-Automatic Pistol with Two Extra Magazines and Arsenal Shipping Box

Frame manufactured in 1944. Blade and flat top notch sights, with a Remington-Rand slide, "FJA" inspected frame with an "arrow" stamp on the trigger guard, stamped trigger, thin checkered hammer, long grip safety, checkered thumb safety, serrated slide catch and arched mainspring housing, Keyes Fiber grips, "L" marked full blue magazine and a "HS" barrel. Included with the pistol are two paper-wrapped magazines and a Red River Depot shipping box numbered to a different pistol.

Class: Curio & Relic Handgun

Very fine as arsenal refinished, with 99% of the parkerized finish, showing some edge wear, handling marks and light spotting. Some minor covered pitting is present on the frame. The grips are excellent, with a few dings. Mild wear and staining is visible on the box. Mechanically excellent.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,600.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 15 of 41

1.178.0.804.ccd3ec6.8.115