Premiere Firearms Auction - Day 2
Saturday, September 8, 2018 | 9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 2
Saturday, September 8, 2018 | 9:00 AM Central
Auction closed.
Internet Premium: 21.5%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
See Special Terms for additional fees
Cash Payment Discount: 3.5%
Description
Large variety of antique and modern firearms to be sold over three days. Read More http://www.rockislandauction.com
x Cancel
Czech - ZB-26
Lot # 1500 (Sale Order: 501 of 1003)
Make: Other - ManufacturerBarrel Length: 23 1/2 inch roundModel: ZB-26Caliber: 7.92 mm MauserStock Material: Solid WoodSerial #: 1287Condition: ExcellentLow Estimate: 27,500High Estimate: 42,500
Very Rare Early Nazi Proofed and Spanish Army Marked Czech ZB 26 Class III/NFA C&R Registered Fully Automatic Medium Machine Gun
This is a rare example of a pre-war ZB 26 manufactured at the Brunn factory in Czechoslovakia. More of these were manufactured for export than were actually manufactured for the Czech military. Under Nazi occupation starting in 1939, these continued to be manufactured as the MG 26 (t) for use by the German military. This series of weapon was originally designed by Vaclav Holek in 1924 and was later assigned the ZB vz. 26 based on the year of adoption. It was an extremely well-designed weapon that proved to be very reliable, so much so it was heavily used by the Germans throughout the war, and it was copied by British in 1935 and chambered in .303 and was commonly called the Bren Gun. This weapon had a very long and successful career being eventually used in over 20 countries around the world to include China. It uses a gas operated, piston/operating rod system firing from an open bolt. It had several very distinguishing features; it had a quick change barrel, the barrel has circular cooling rings on the outside, it uses a detachable box magazine that mounted directly on top of the receiver, and it has off-set sights which are mounted on the left side of the gun, so that you can see around the magazine. The sights are calibrated "2-15" (200-1500 meters). The left side of the receiver is marked: "WAFFENWERKE BRUNN/A.G.", and the right side is marked "ZB 26 No1287". The top of the receiver has a large Spanish Army eagle crest over serial number "1287" over a double Waffenamt proof of "WaA83". It is fitted with a walnut buttstock and pistol grip. The stock has a heavy stamped, cupped buttplate. It is complete with two 20 round box magazines.
Class: Class III
Excellent with 90% plus of the blue finish overall showing light wear on the edges and high spots. The wood components both show some heavier handling marks and light to moderate pressure dents overall. At some point this machine gun had been deactivated by inserting either a pin or applying a small plug weld, up through the front underside area of the receiver extension (in front of the interrupted barrel locking threads) into the chamber area of the barrel. Subsequently this pin/plug area was completely drilled out and an original WWII Nazi proofed type barrel reinstalled. This procedure has reactivated this weapon to a functional condition. The weapon hand cycles and dry fires correctly. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a rare example of a pre-war ZB 26 manufactured at the Brunn factory in Czechoslovakia. More of these were manufactured for export than were actually manufactured for the Czech military. Under Nazi occupation starting in 1939, these continued to be manufactured as the MG 26 (t) for use by the German military. This series of weapon was originally designed by Vaclav Holek in 1924 and was later assigned the ZB vz. 26 based on the year of adoption. It was an extremely well-designed weapon that proved to be very reliable, so much so it was heavily used by the Germans throughout the war, and it was copied by British in 1935 and chambered in .303 and was commonly called the Bren Gun. This weapon had a very long and successful career being eventually used in over 20 countries around the world to include China. It uses a gas operated, piston/operating rod system firing from an open bolt. It had several very distinguishing features; it had a quick change barrel, the barrel has circular cooling rings on the outside, it uses a detachable box magazine that mounted directly on top of the receiver, and it has off-set sights which are mounted on the left side of the gun, so that you can see around the magazine. The sights are calibrated "2-15" (200-1500 meters). The left side of the receiver is marked: "WAFFENWERKE BRUNN/A.G.", and the right side is marked "ZB 26 No1287". The top of the receiver has a large Spanish Army eagle crest over serial number "1287" over a double Waffenamt proof of "WaA83". It is fitted with a walnut buttstock and pistol grip. The stock has a heavy stamped, cupped buttplate. It is complete with two 20 round box magazines.
Class: Class III
Excellent with 90% plus of the blue finish overall showing light wear on the edges and high spots. The wood components both show some heavier handling marks and light to moderate pressure dents overall. At some point this machine gun had been deactivated by inserting either a pin or applying a small plug weld, up through the front underside area of the receiver extension (in front of the interrupted barrel locking threads) into the chamber area of the barrel. Subsequently this pin/plug area was completely drilled out and an original WWII Nazi proofed type barrel reinstalled. This procedure has reactivated this weapon to a functional condition. The weapon hand cycles and dry fires correctly. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Erfurt - 08/15 MG
Lot # 1501 (Sale Order: 502 of 1003)
Make: Other - ManufacturerModel: 15-AugBarrel Length: 29 inch roundCaliber: 7.92 mm MauserStock Material: Other - Stock MaterialSerial #: 5612aCondition: ExcellentLow Estimate: 16,000High Estimate: 25,000Other: walnut
Desirable World War I German Erfurt Manufacture Class III/NFA C&R Registered Maxim Model 1908/15 Fully Automatic Machine Gun with Bipod and Magazines
This is an very fine example of a WWI German Model 1908/15 Maxim heavy machine gun manufactured by the Erfurt Arsenal in 1917. The top cover is marked "5612a/M.G.08/15/Gwf./Erfurt/1917". It has the original flip-up tangent style rear sight graduated from 400-2,000 meters, a simple inverted "v" front sight and retains its large steel water jacket and bipod. This beautiful weapon has mostly matching serial numbers, with the only non-matching parts being the entire bolt assembly and the wooden buttstock; however, both are original WWII components. This Maxin machine gun was originally developed by Hiram Maxim in 1883-1884 and was one of the most influential weapons of the 20th century. It became the standard German heavy machine gun in 1899 and was used by Imperial German forces throughout WWI as a ground mounted version in trench warfare. It was the first self-sustaining heavy MG used in any sizeable numbers on any battlefield. It could lay down a sustained suppressive fire without any other external means other than by the energy generated from the force of firing a round. During WWI, it earned the nickname the "Devils Paintbrush" due to the fact that during the large scale assault form the trenches, it could literally mow down hundreds of men in a single engagement. The large distinctive steel water jacket could hold seven quarts of water to cool the barrel which allowed it to have long sustained bursts of fire. It was capable of firing approximately 500 rounds of sustained fire before the water started to boil and up to 2,000 rounds of sustained fire before the water would all boil off and the jacket had to be refilled. This was quite an astonishing feat in 1915. It was also adopted by the British in 1887 and Russia and many other countries prior to WWI. It comes with its sheet metal bipod and two drum magazines stored in its wooden container.
Class: Class III
Very fine with 90% plus of the original blue finish on the receiver/action and various associated parts with light edge and side wear mixed with some light brown patina. The very rare aspect is that it still retains most of its WWII hand painted camouflage on the barrel jacket. Usually this flaked off due to the heat during firing, while this example retains the wonderful dark green with light and dark brown colors overall that are typically seen on WWII German camouflaged helmets. A really outstanding example of an original WWI German Maxim 08/15 machine gun. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is an very fine example of a WWI German Model 1908/15 Maxim heavy machine gun manufactured by the Erfurt Arsenal in 1917. The top cover is marked "5612a/M.G.08/15/Gwf./Erfurt/1917". It has the original flip-up tangent style rear sight graduated from 400-2,000 meters, a simple inverted "v" front sight and retains its large steel water jacket and bipod. This beautiful weapon has mostly matching serial numbers, with the only non-matching parts being the entire bolt assembly and the wooden buttstock; however, both are original WWII components. This Maxin machine gun was originally developed by Hiram Maxim in 1883-1884 and was one of the most influential weapons of the 20th century. It became the standard German heavy machine gun in 1899 and was used by Imperial German forces throughout WWI as a ground mounted version in trench warfare. It was the first self-sustaining heavy MG used in any sizeable numbers on any battlefield. It could lay down a sustained suppressive fire without any other external means other than by the energy generated from the force of firing a round. During WWI, it earned the nickname the "Devils Paintbrush" due to the fact that during the large scale assault form the trenches, it could literally mow down hundreds of men in a single engagement. The large distinctive steel water jacket could hold seven quarts of water to cool the barrel which allowed it to have long sustained bursts of fire. It was capable of firing approximately 500 rounds of sustained fire before the water started to boil and up to 2,000 rounds of sustained fire before the water would all boil off and the jacket had to be refilled. This was quite an astonishing feat in 1915. It was also adopted by the British in 1887 and Russia and many other countries prior to WWI. It comes with its sheet metal bipod and two drum magazines stored in its wooden container.
Class: Class III
Very fine with 90% plus of the original blue finish on the receiver/action and various associated parts with light edge and side wear mixed with some light brown patina. The very rare aspect is that it still retains most of its WWII hand painted camouflage on the barrel jacket. Usually this flaked off due to the heat during firing, while this example retains the wonderful dark green with light and dark brown colors overall that are typically seen on WWII German camouflaged helmets. A really outstanding example of an original WWI German Maxim 08/15 machine gun. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Tikka Suomi KP31 Fully Transferrable C&R SMG
Lot # 1502 (Sale Order: 503 of 1003)
Make: Other - ManufacturerModel: Suomi-KP/-31Barrel Length: 12 1/2 inch roundCaliber: 9 mmStock Material: Solid WoodSerial #: 3921Condition: GoodLow Estimate: 14,000High Estimate: 22,500
Tikka Suomi KP/-31 Military Submachine Gun, Class III/NFA C&R Machine Gun, Fully Transferrable, with Magazine Pouch
Developed in the early 1930s, the Suomi KP (Suomi-konepistooli, literally Finnish Machine Pistol) was pictured as a squad-level substitute for a belt-fed light machine gun, being fed with a 71 round drum magazine; the KP and this drum would later be copied by the Soviets, in particular the PPD-40 and PPSh-41 SMGs. In combat, the KP was found to be an effective weapon, though not suited for the Squad Automatic Weapon niche; revised doctrine gave squads a dedicated light machine gun along with two SMG-equipped troopers, which gave units a very high density of close-quarters firepower, particularly while on the move or in dense forest. Among the most famous users was Simo Hayha, aka the White Death, one of Finland's most noted snipers, who reportedly eliminated 200+ enemy troopers with the SMG. Blade front and tangent rear sights, with a screw-mounted casing deflector on the right side of the receiver, a quick-release switch for the barrel shroud, and a sight base marked "PATENT/1932" on the right and "SUOMI/Tikkakoski" on the left. The barrel is dated "4-17-42", and a 3-position selector switch (safe/semi/full) extending into the triggerguard. The smooth hardwood stock is fitted with a brown leather sling and a steel buttplate. A tan canvas drum magazine pouch is included.
Class: Class III
Fine, with 60% of the original blue finish, showing areas of gray and brown patina, bright edge wear, and mild handling marks and spotting. The stock is broken at the wrist, with multiple pinned and screwed repairs, along with a number of lighter dents and scuffs. The drum case is good, with some light stains and a few areas of lost stitching. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Developed in the early 1930s, the Suomi KP (Suomi-konepistooli, literally Finnish Machine Pistol) was pictured as a squad-level substitute for a belt-fed light machine gun, being fed with a 71 round drum magazine; the KP and this drum would later be copied by the Soviets, in particular the PPD-40 and PPSh-41 SMGs. In combat, the KP was found to be an effective weapon, though not suited for the Squad Automatic Weapon niche; revised doctrine gave squads a dedicated light machine gun along with two SMG-equipped troopers, which gave units a very high density of close-quarters firepower, particularly while on the move or in dense forest. Among the most famous users was Simo Hayha, aka the White Death, one of Finland's most noted snipers, who reportedly eliminated 200+ enemy troopers with the SMG. Blade front and tangent rear sights, with a screw-mounted casing deflector on the right side of the receiver, a quick-release switch for the barrel shroud, and a sight base marked "PATENT/1932" on the right and "SUOMI/Tikkakoski" on the left. The barrel is dated "4-17-42", and a 3-position selector switch (safe/semi/full) extending into the triggerguard. The smooth hardwood stock is fitted with a brown leather sling and a steel buttplate. A tan canvas drum magazine pouch is included.
Class: Class III
Fine, with 60% of the original blue finish, showing areas of gray and brown patina, bright edge wear, and mild handling marks and spotting. The stock is broken at the wrist, with multiple pinned and screwed repairs, along with a number of lighter dents and scuffs. The drum case is good, with some light stains and a few areas of lost stitching. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Madsen - 50
Lot # 1503 (Sale Order: 504 of 1003)
Make: Other - ManufacturerBarrel Length: 8 inch ruondModel: 50Caliber: 9 mm LugerStock Material: MetalCondition: ExcellentSerial #: 44480Low Estimate: 9,500High Estimate: 16,000
Danish Model 50 Fully Automatic Class III/NFA C&R Fully Automatic Submachine Gun with Original Magazines
This is an exceptional example of a late production Danish Model 50 submachine gun chambered in 9 mm Luger. The Model 50 is actually an update version of the earlier M1946 produced right after WWII. Both used many of the wartime expedient stamped steel manufacturing processed parts developed during WWII. The really interesting aspect of this model is that it is manufactured from two separate stamped steel receiver halves that are hinged at the rear of the receiver and are held together on the front end by the barrel nut. Although it seems very unconventional, it proved to be an extremely reliable and accurate submachine gun. This model was actually demonstrated for military testing in Canada in November 1950 that was also witnessed/attended by representatives from Britain, the U.S. Army, and Danish representatives. In that test, a single M50 SMG successfully test fired over 20K rounds of ammunition in a little over 2 1/2 hours with no failures. As noted, it uses many stamped steel parts except for the barrel and bolt, both of which are machined. It has a right side, folding wire type stock, a grip safety behind the magazine well, and side mounted sling swivels. It has a simple non-adjustable peep rear sight on the rear of the receiver and a blade front sight. The side of the receiver is stamped with serial number "44480" followed by "MADSEN M50 9mm" and below that it is stamped "MADE IN DENMARK". It comes with three original 30 round stick magazine, an original canvas sling, and magazine pouch. This late production example still retains the original leather cover on the wire stock and has a magazine loader in the grip.
Class: Class III
Excellent with 98% of the original Danish arsenal black painted finish showing only very light edge and high stop wear overall. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is an exceptional example of a late production Danish Model 50 submachine gun chambered in 9 mm Luger. The Model 50 is actually an update version of the earlier M1946 produced right after WWII. Both used many of the wartime expedient stamped steel manufacturing processed parts developed during WWII. The really interesting aspect of this model is that it is manufactured from two separate stamped steel receiver halves that are hinged at the rear of the receiver and are held together on the front end by the barrel nut. Although it seems very unconventional, it proved to be an extremely reliable and accurate submachine gun. This model was actually demonstrated for military testing in Canada in November 1950 that was also witnessed/attended by representatives from Britain, the U.S. Army, and Danish representatives. In that test, a single M50 SMG successfully test fired over 20K rounds of ammunition in a little over 2 1/2 hours with no failures. As noted, it uses many stamped steel parts except for the barrel and bolt, both of which are machined. It has a right side, folding wire type stock, a grip safety behind the magazine well, and side mounted sling swivels. It has a simple non-adjustable peep rear sight on the rear of the receiver and a blade front sight. The side of the receiver is stamped with serial number "44480" followed by "MADSEN M50 9mm" and below that it is stamped "MADE IN DENMARK". It comes with three original 30 round stick magazine, an original canvas sling, and magazine pouch. This late production example still retains the original leather cover on the wire stock and has a magazine loader in the grip.
Class: Class III
Excellent with 98% of the original Danish arsenal black painted finish showing only very light edge and high stop wear overall. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Haenel C G - MP 44
Lot # 1504 (Sale Order: 505 of 1003)
Make: Other - ManufacturerModel: MP 44Barrel Length: 16 1/2 inch roundCaliber: 7.92 x 33mm KurzStock Material: Solid WoodSerial #: 1861uCondition: FairLow Estimate: 13,000High Estimate: 19,000Other: walnut
World War II Production German MP-44 Fully Automatic Class III/NFA C&R Registered Sturmgewehr Rifle
This is a good example of a WWII German MP-44 assault rifle that was manufactured by the C.G. Haenel factory. The underside of the receiver is stamped with "cos" which stands for Merzwerke, Gebr. Merz Frankfurt (who was a supplier of stamped parts from 1942 to 1945) and an "Eagle WaA37" Waffenamt proof. This series of assault rifles were the first true production assault rifles as they could fire in both a fully automatic and semi-automatic modes. The goal was to provide the German soldier shorter/lighter cartridges that still had a greater effective range than the MP40s but with a higher rate of fire than the standard K98 rifle. There were approximately 300,000 manufactured before the end of WWII, all chambered for the new 7.92x33mm Kurz round (basically a shortened 7.92x57mm cartridge). By using the shortened intermediate length cartridge, this design ushered in a whole new generation of assault rifles after WWII. They used wartime expedient manufacturing techniques, such as a sheet-metal stamped receiver and trigger housing that was welded or pinned together with minimal machined internal parts, i.e. the bolt and barrel. They also used a simple slab-sided wooden buttstock and the bakelite pistol grip panels. The original serial number "1861u" is stamped on the left side of the magazine housing with "MP44" stamped on the upper side. It is complete with one original magazine stamped "fxo" and "MP44" on the left side.
Class: Class III
Good with 20% plus of the original blue finish still remaining, with the balance a gray/brown patina finish mixed with light rust on all the surface of the metal. The refinished buttstock is in very good condition with a light color walnut with minor handling marks on the sides. Currently, it is missing the sheet metal forend that covers the barrel and gas cylinder, the muzzle nut and front sight cover. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a good example of a WWII German MP-44 assault rifle that was manufactured by the C.G. Haenel factory. The underside of the receiver is stamped with "cos" which stands for Merzwerke, Gebr. Merz Frankfurt (who was a supplier of stamped parts from 1942 to 1945) and an "Eagle WaA37" Waffenamt proof. This series of assault rifles were the first true production assault rifles as they could fire in both a fully automatic and semi-automatic modes. The goal was to provide the German soldier shorter/lighter cartridges that still had a greater effective range than the MP40s but with a higher rate of fire than the standard K98 rifle. There were approximately 300,000 manufactured before the end of WWII, all chambered for the new 7.92x33mm Kurz round (basically a shortened 7.92x57mm cartridge). By using the shortened intermediate length cartridge, this design ushered in a whole new generation of assault rifles after WWII. They used wartime expedient manufacturing techniques, such as a sheet-metal stamped receiver and trigger housing that was welded or pinned together with minimal machined internal parts, i.e. the bolt and barrel. They also used a simple slab-sided wooden buttstock and the bakelite pistol grip panels. The original serial number "1861u" is stamped on the left side of the magazine housing with "MP44" stamped on the upper side. It is complete with one original magazine stamped "fxo" and "MP44" on the left side.
Class: Class III
Good with 20% plus of the original blue finish still remaining, with the balance a gray/brown patina finish mixed with light rust on all the surface of the metal. The refinished buttstock is in very good condition with a light color walnut with minor handling marks on the sides. Currently, it is missing the sheet metal forend that covers the barrel and gas cylinder, the muzzle nut and front sight cover. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
LE.Gr.W36 Mortar, Destructive Device
Lot # 1505 (Sale Order: 506 of 1003)
Make: Other - ManufacturerBarrel Length: 13 3/4 inchesModel: LE.Gr.W36Caliber: 50 mmStock Material: Other - Stock MaterialCondition: Very GoodLow Estimate: 8,500High Estimate: 13,000Other: metal
World War II Nazi German Model 36 Light Mortar, Class III/NFA Destructive Device, with a Dummy Round
Developed by Rheinmetall-Borsig in the mid 1930s, the Model 36 was intended to be more mobile than other, heavier mortars while still giving infantry a range advantage over thrown or rifle-launched grenades. The launch tube is fitted with a spring-loaded firing mechanism, with "R21478/Sg 2675 Rl 489a RhM380/Fl748 acv 1941" next to a pair of Waffenamt stamps, and "acv/1941" repeated on the mechanism housing; "acv" has not been identified. The baseplate is marked "bcd 42" (Gustloff-Werke), and fitted with a combined traverse and elevation mechanism, with a range indicator graduated from "0" to "500", a spirit level, and spikes on the underside. One inert round is included.
Class: Class III
Very fine, with 70% of the original blue finish, showing areas of brown patina, wear and handling marks. The spirit level is unbroken, the traverse and elevation hardware runs smoothly, and the firing mechanism appears to be in good order. NOTE: This Destructive Device is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Developed by Rheinmetall-Borsig in the mid 1930s, the Model 36 was intended to be more mobile than other, heavier mortars while still giving infantry a range advantage over thrown or rifle-launched grenades. The launch tube is fitted with a spring-loaded firing mechanism, with "R21478/Sg 2675 Rl 489a RhM380/Fl748 acv 1941" next to a pair of Waffenamt stamps, and "acv/1941" repeated on the mechanism housing; "acv" has not been identified. The baseplate is marked "bcd 42" (Gustloff-Werke), and fitted with a combined traverse and elevation mechanism, with a range indicator graduated from "0" to "500", a spirit level, and spikes on the underside. One inert round is included.
Class: Class III
Very fine, with 70% of the original blue finish, showing areas of brown patina, wear and handling marks. The spirit level is unbroken, the traverse and elevation hardware runs smoothly, and the firing mechanism appears to be in good order. NOTE: This Destructive Device is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
German - MG-34
Lot # 1506 (Sale Order: 507 of 1003)
Make: Other - ManufacturerBarrel Length: 24 inch roundModel: MG-34Caliber: 7.92 mm MauserStock Material: Other - Stock MaterialCondition: Very Good to ExcellentSerial #: 9922aLow Estimate: 18,000High Estimate: 27,500
Highly Desirable World War II Nazi MG-34 Class III/NFA C&R Registered Fully Automatic Light Machine Gun with Tripod Mount
This is an example of a late WWII German MG-34 light machine gun that was used late in World War II by the German forces. These were developed prior to WWII by Heirich Vollmer of Mauser and were manufactured by several companies throughout the war up to and including the early part of 1945. They were an excellent and very reliable weapon; however, they proved to be very costly and time consuming to produce, so they were supplemented/replaced with the later stamped and machined MG-42. These weapons featured all machined parts that were, in many cases, hand fitted with exacting tolerances. This example was manufactured by the Waffenwerke Brunn factory in 1944 in Brno, Czechoslovakia, wartime code "dot". The top of the barrel jacket is marked "dot/1944/9922a", and it is fitted with an original folding bipod, front sight and tangent rear marked 2-20 (200-2,000 meters) and is fitted with dark red/black bakelite buttstock. It has matching visible numbered "major" parts with some smaller replacement parts. It comes with two Gurttrommel MG-34 basket/drum magazines and it is currently mounted in an original WWII German Dreifuss tripod designed for the MG-34. The side of the mount is marked "1938/8872".
Class: Class III
Very fine overall with 85% of the blue finish remaining overall with general light wear and blue loss from actual firing use with a slight purplish tint to the barrel jacket. The mount is in fine condition with 85% of a post-war multi-colored camouflaged paint pattern. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is an example of a late WWII German MG-34 light machine gun that was used late in World War II by the German forces. These were developed prior to WWII by Heirich Vollmer of Mauser and were manufactured by several companies throughout the war up to and including the early part of 1945. They were an excellent and very reliable weapon; however, they proved to be very costly and time consuming to produce, so they were supplemented/replaced with the later stamped and machined MG-42. These weapons featured all machined parts that were, in many cases, hand fitted with exacting tolerances. This example was manufactured by the Waffenwerke Brunn factory in 1944 in Brno, Czechoslovakia, wartime code "dot". The top of the barrel jacket is marked "dot/1944/9922a", and it is fitted with an original folding bipod, front sight and tangent rear marked 2-20 (200-2,000 meters) and is fitted with dark red/black bakelite buttstock. It has matching visible numbered "major" parts with some smaller replacement parts. It comes with two Gurttrommel MG-34 basket/drum magazines and it is currently mounted in an original WWII German Dreifuss tripod designed for the MG-34. The side of the mount is marked "1938/8872".
Class: Class III
Very fine overall with 85% of the blue finish remaining overall with general light wear and blue loss from actual firing use with a slight purplish tint to the barrel jacket. The mount is in fine condition with 85% of a post-war multi-colored camouflaged paint pattern. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
1942 Dated World War II "bga" Code Field Mount for a MG-42 Machi
Lot # 1507 (Sale Order: 508 of 1003)
Make: Other - ManufacturerModel: NoneCaliber: N/AStock Material: Other - Stock MaterialCondition: OtherSerial #: NSNLow Estimate: 1,100High Estimate: 1,600
1942 Dated World War II "bga" Code Field Mount for a MG-42 Machine Gun
Designed to be carried on the back of an assistant gunner, the field mount for the MG-42 machine gun could be rapidly unfolded to serve as an adjustable tripod or as the base for an anti-aircraft pintle mount (not included). With a green paint finish overall, a pair of brown leather shoulder straps and a pair of leather pads on the front leg, as well as a small metal tool compartment on the left side. The side of the traverse and elevation mechanism is stamped "bga/42/334".
Class: Other
Good. 75% original green paint finish remains with areas of chipping and wear revealing the red painted undercoating and rough handling marks. The leather components are good with tight stitching, scuffs, some age cracking on the straps, and some moisture damage.
Designed to be carried on the back of an assistant gunner, the field mount for the MG-42 machine gun could be rapidly unfolded to serve as an adjustable tripod or as the base for an anti-aircraft pintle mount (not included). With a green paint finish overall, a pair of brown leather shoulder straps and a pair of leather pads on the front leg, as well as a small metal tool compartment on the left side. The side of the traverse and elevation mechanism is stamped "bga/42/334".
Class: Other
Good. 75% original green paint finish remains with areas of chipping and wear revealing the red painted undercoating and rough handling marks. The leather components are good with tight stitching, scuffs, some age cracking on the straps, and some moisture damage.
Vickers Ltd - Machine Gun
Lot # 1508 (Sale Order: 509 of 1003)
Make: Other - ManufacturerBarrel Length: 28 inch roundModel: Machine GunCaliber: 303 BritishStock Material: Other - Stock MaterialSerial #: H1941Condition: ExcellentLow Estimate: 13,000High Estimate: 19,000Other: walnut
Scarce Fully Automatic Class III/NFA Registered British Vickers Type Machine Gun Assembled by "VSM" with Tripod, Cradle, Optical Sight and Accessories
This is a fine example of a WWI era British Vickers/Maxim type machine gun as assembled by the "VSM" Company of Cincinnati Ohio using an original set of British Vickers machine gun parts with a newly manufactured side plate. The Vickers machine gun was basically an updated and improved version of the original German Maxim that was introduced in the late 1890s. Great Britain was the first country to recognize the importance and battle advantage of the machine gun and was also the first country to introduce it into their inventory in 1889. These Maxim machine guns were be dubbed the "Devils Paintbrush" as they would produce huge numbers of casualties during the mass charges from trench to trench during WWI. The original version held approximately 7 quarts of water in the barrel jacket and could fire long intermittent burst of fire for the first 500-800 rounds after approximately 2,000 rounds of fire, the water would boil off and they had to reduce the firing rate. This example is also equipped with a very rare side mounted MKIII optical sight in its original side mounted receiver bracket. This is a very complicated and precise optical sight that can be adjusted for extremely long ranges as the range wheel is calibrated from 1-44 (100-4,400 meters), and it is also fitted with a fine tune elevation wheel next to the coarse elevation adjustment wheel to precisely set the elevation. The sight is also fitted with a fine tune, dual adjustment windage wheel that has two knobs one on each sides (L and R), and it is calibrated in MILS on the base of the windage dial. All of this was necessary when setting up your firing range card that was so effective used during trench warfare where they could just dial in the range and elevation coordinates during the night to pin-point preset targets, defilade positions and trenches. The top of the sight is marked "Dial, Sight, MK. MKIII/PL 1965 1941". The top rear section of the water jacket is stamped "VSM/H1941" with various British acceptance proofs. The top of the feed tray mechanism. Side of the lower receiver area and various other parts are all stamped with "1941". The top of the lock assembly (breechblock) is stamped "1437 B", along with various "VSM" proof marks. This desirable example comes complete with an original and correct "MKIV tripod" and cradle that is serial numbered "H1941" on the identification plate, a "VSM MKII" marked spare barrel, three cloth ammunition belts, a heavy, brass table mounted hand crank, belt loading machine, in its original wooden storage box, an original green water can and an original wooden spare box (which is empty).
Class: Class III
Excellent with 90% plus of the current blue finish overall with light wear and blue loss on the edges and high spots overall, and some light thinning on the outside of the water jacket. The tripod is in very fine condition with 95% of its green painted finish overall with light wear. The various other accessories, belt loading machine, water can, and spare box are all in very fine condition. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, machine gun which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478. Additional Information: The description for this weapon gun has been completely revised to identify it as an assembled Machine Gun using a set of original parts with a new side plate..
This is a fine example of a WWI era British Vickers/Maxim type machine gun as assembled by the "VSM" Company of Cincinnati Ohio using an original set of British Vickers machine gun parts with a newly manufactured side plate. The Vickers machine gun was basically an updated and improved version of the original German Maxim that was introduced in the late 1890s. Great Britain was the first country to recognize the importance and battle advantage of the machine gun and was also the first country to introduce it into their inventory in 1889. These Maxim machine guns were be dubbed the "Devils Paintbrush" as they would produce huge numbers of casualties during the mass charges from trench to trench during WWI. The original version held approximately 7 quarts of water in the barrel jacket and could fire long intermittent burst of fire for the first 500-800 rounds after approximately 2,000 rounds of fire, the water would boil off and they had to reduce the firing rate. This example is also equipped with a very rare side mounted MKIII optical sight in its original side mounted receiver bracket. This is a very complicated and precise optical sight that can be adjusted for extremely long ranges as the range wheel is calibrated from 1-44 (100-4,400 meters), and it is also fitted with a fine tune elevation wheel next to the coarse elevation adjustment wheel to precisely set the elevation. The sight is also fitted with a fine tune, dual adjustment windage wheel that has two knobs one on each sides (L and R), and it is calibrated in MILS on the base of the windage dial. All of this was necessary when setting up your firing range card that was so effective used during trench warfare where they could just dial in the range and elevation coordinates during the night to pin-point preset targets, defilade positions and trenches. The top of the sight is marked "Dial, Sight, MK. MKIII/PL 1965 1941". The top rear section of the water jacket is stamped "VSM/H1941" with various British acceptance proofs. The top of the feed tray mechanism. Side of the lower receiver area and various other parts are all stamped with "1941". The top of the lock assembly (breechblock) is stamped "1437 B", along with various "VSM" proof marks. This desirable example comes complete with an original and correct "MKIV tripod" and cradle that is serial numbered "H1941" on the identification plate, a "VSM MKII" marked spare barrel, three cloth ammunition belts, a heavy, brass table mounted hand crank, belt loading machine, in its original wooden storage box, an original green water can and an original wooden spare box (which is empty).
Class: Class III
Excellent with 90% plus of the current blue finish overall with light wear and blue loss on the edges and high spots overall, and some light thinning on the outside of the water jacket. The tripod is in very fine condition with 95% of its green painted finish overall with light wear. The various other accessories, belt loading machine, water can, and spare box are all in very fine condition. NOTE: This weapon is a National Firearms Act (NFA), fully transferable Class 3, machine gun which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478. Additional Information: The description for this weapon gun has been completely revised to identify it as an assembled Machine Gun using a set of original parts with a new side plate..
DWM - MG 08
Lot # 1509 (Sale Order: 510 of 1003)
Make: Other - ManufacturerModel: MG 08Barrel Length: 27 inch roundCaliber: 7.92 mm MauserStock Material: Other - Stock MaterialSerial #: 46186Condition: GoodLow Estimate: 6,500High Estimate: 11,000Other: walnut
Desirable World War I Imperial German Army Maxim Model 1908 (DWM) Fully Automatic Class III/NFA C&R Registered Heavy Machine Gun with Sled Mount
This is a very fine example of an original WWI German Maxim heavy machine gun manufactured in 1918 by the DWM factory. This weapon system was originally developed by Hiram Maxim in the 1883-1884 time frame with the final design finalized 1885. It became one of the most influential weapons of the 20th century, specifically during WWI as it was the first true self-sustaining machine gun that could fire in a fully-automatic mode without external means other than by power of the round and mechanism itself. In the late 1880s, the British Army is credited as being the first country to recognize its importance as a battlefield weapon and the first to actually officially adopted it. Germany officially adopted the weapon in 1899 and used it throughout WWI and well into the Weimar period. This example is a late "1918" production model with serial number "46186". It has some matching visible serial numbers to include the top cover, water jacket, back plate/butterfly trigger mechanism, feed mechanism and the spade grip assembly. It has a mismatched bolt assembly, which is not uncommon as they were removed when captured. The top cover is marked: "46186/M.G.0.8./D.W.M./BERLIN/1918". The tangent style rear sight is graduated from calibrated from 400-2,000 meters with a simple inverted "V" front sight that is fitted to the front of the water jacket. The water jacket held seven (7) quarts of water which allowed the machine gunner to fire long bursts of intermittent, sustained fire. After approximately 500 rounds of fire, the water would started to boil and would completely boil off/evaporate after 2,000 rounds. During WWI this weapon would wreak havoc and devastation in the large open field battles in France and Germany where it was nicknamed the "Devils Paintbrush" because of the thousands of soldiers it killed. This single weapon changed the tactics of land warfare forever. It does come with an original WWI sled mount, a wooden ammunition can two spare breech bolts.
Class: Class III
Very good overall with 20% plus of the original blue finish still remaining overall with the balance of the metal finish having a light rusted surface (but no visible heavy pitting or erosion). It almost appears that it sat in a museum or display and was never oiled or wiped down. The metal sled retains 60% of its original green painted finish with the balance a dark patina from use in the field during WWI. The two extra breech bolts are in good condition also showing a light rusted finish overall. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a very fine example of an original WWI German Maxim heavy machine gun manufactured in 1918 by the DWM factory. This weapon system was originally developed by Hiram Maxim in the 1883-1884 time frame with the final design finalized 1885. It became one of the most influential weapons of the 20th century, specifically during WWI as it was the first true self-sustaining machine gun that could fire in a fully-automatic mode without external means other than by power of the round and mechanism itself. In the late 1880s, the British Army is credited as being the first country to recognize its importance as a battlefield weapon and the first to actually officially adopted it. Germany officially adopted the weapon in 1899 and used it throughout WWI and well into the Weimar period. This example is a late "1918" production model with serial number "46186". It has some matching visible serial numbers to include the top cover, water jacket, back plate/butterfly trigger mechanism, feed mechanism and the spade grip assembly. It has a mismatched bolt assembly, which is not uncommon as they were removed when captured. The top cover is marked: "46186/M.G.0.8./D.W.M./BERLIN/1918". The tangent style rear sight is graduated from calibrated from 400-2,000 meters with a simple inverted "V" front sight that is fitted to the front of the water jacket. The water jacket held seven (7) quarts of water which allowed the machine gunner to fire long bursts of intermittent, sustained fire. After approximately 500 rounds of fire, the water would started to boil and would completely boil off/evaporate after 2,000 rounds. During WWI this weapon would wreak havoc and devastation in the large open field battles in France and Germany where it was nicknamed the "Devils Paintbrush" because of the thousands of soldiers it killed. This single weapon changed the tactics of land warfare forever. It does come with an original WWI sled mount, a wooden ammunition can two spare breech bolts.
Class: Class III
Very good overall with 20% plus of the original blue finish still remaining overall with the balance of the metal finish having a light rusted surface (but no visible heavy pitting or erosion). It almost appears that it sat in a museum or display and was never oiled or wiped down. The metal sled retains 60% of its original green painted finish with the balance a dark patina from use in the field during WWI. The two extra breech bolts are in good condition also showing a light rusted finish overall. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Bergmann Theodor - MP35/1
Lot # 1510 (Sale Order: 511 of 1003)
Make: Other - ManufacturerModel: MP35/1Barrel Length: 12.60 inch roundCaliber: 9 mm LugerStock Material: Laminated WoodSerial #: 3261Condition: Very Good to ExcellentLow Estimate: 12,000High Estimate: 17,000
Desirable Early Pre-War Bergmann MP35/1 Class III/NFA C&R Registered Fully Transferrable Submachine Gun
Developed by Bergmann in the early 1930s, the MP35/1 is a fine example of the type of heavily machined, wood stocked submachine gun that was the state of the art manufacturing prior to the introduction of the stamped sheet metal guns. It is an open bolt, blow-back weapon that uses a "bolt action" type non-reciprocating cocking piece to initially load the weapon. The first time you turn, pull and returned the bolt to a closed battery position. After that, the weapon will fire in the open bolt position. It has an interesting dual-action, two-piece trigger mechanism in that pulling on the front trigger at the top only the weapon will fire in semi-automatic only mode, while pulling at the top and bottom triggers together will allow the weapon to fire in a fully automatic mode. The dual triggers provide instant tactical feedback to the operator regarding what firing mode they're about to use. While the German Army standardized on the simpler to produce MP38 and MP40 submachine guns, the Waffen-SS adopted the MP35, as did a number of foreign buyers, primarily due to their quick availability. As noted, this weapon has the all steel and fully machined parts and components, with the scarce 12.60 inch long barrel housed in a perforated barrel jacket with an integral muzzle brake on the end. It is fitted with a tangent rear sight adjustable from 50-1000 meters and a blade front sight. The receiver is unmarked aside of the serial number of "3261" on the right rear side and the "S" and "F" marked safety switch on the left side. The cocking piece is stamped with a "eagle/N" proof on top with serial number "2416b" on the left side. It is fitted with a wartime laminated replacement stock that is numbered on the underside "2416b", and is also fitted with the same numbered trigger guard plate/bow. The stock is fitted with a heavy steel buttplate. It is complete with one magazine.
Class: Class III
Very fine with 85% plus of the blued finish remaining overall with the complete bolt assembly still in the white. The laminated stock is also in very fine condition with a nice medium brown color overall showing only minor handling marks. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Developed by Bergmann in the early 1930s, the MP35/1 is a fine example of the type of heavily machined, wood stocked submachine gun that was the state of the art manufacturing prior to the introduction of the stamped sheet metal guns. It is an open bolt, blow-back weapon that uses a "bolt action" type non-reciprocating cocking piece to initially load the weapon. The first time you turn, pull and returned the bolt to a closed battery position. After that, the weapon will fire in the open bolt position. It has an interesting dual-action, two-piece trigger mechanism in that pulling on the front trigger at the top only the weapon will fire in semi-automatic only mode, while pulling at the top and bottom triggers together will allow the weapon to fire in a fully automatic mode. The dual triggers provide instant tactical feedback to the operator regarding what firing mode they're about to use. While the German Army standardized on the simpler to produce MP38 and MP40 submachine guns, the Waffen-SS adopted the MP35, as did a number of foreign buyers, primarily due to their quick availability. As noted, this weapon has the all steel and fully machined parts and components, with the scarce 12.60 inch long barrel housed in a perforated barrel jacket with an integral muzzle brake on the end. It is fitted with a tangent rear sight adjustable from 50-1000 meters and a blade front sight. The receiver is unmarked aside of the serial number of "3261" on the right rear side and the "S" and "F" marked safety switch on the left side. The cocking piece is stamped with a "eagle/N" proof on top with serial number "2416b" on the left side. It is fitted with a wartime laminated replacement stock that is numbered on the underside "2416b", and is also fitted with the same numbered trigger guard plate/bow. The stock is fitted with a heavy steel buttplate. It is complete with one magazine.
Class: Class III
Very fine with 85% plus of the blued finish remaining overall with the complete bolt assembly still in the white. The laminated stock is also in very fine condition with a nice medium brown color overall showing only minor handling marks. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Registered Transferrable Mauser Schnellfeuer Machine Gun w/Stock
Lot # 1511 (Sale Order: 512 of 1003)
Make: MauserModel: 1932 Schnellfeuer PistolBarrel Length: 5 1/2 inch roundCaliber: 7.63 mm Mauser autoStock Material: Other - Stock MaterialCondition: Very Good to ExcellentSerial #: 83408Low Estimate: 10,000High Estimate: 15,000Other: hardwood
Mauser Model 1932 (712) Schnellfeuer Machine Pistol, Class III/NFA C&R Fully Transferrable Machine Gun, with Stock Rig and WWII Capture Papers
Introduced due to competitive pressure from Astra's Spanish-made Broomhandle pistols, especially in the lucrative Chinese market, the 1932 Schnellfeuer took everything people loved about the Broomhandle and cranked it to 11. The result was a compact machine pistol, which could be reconfigured to a carbine as needed, feed from 10 and 20 round detachable box magazines (without sacrificing clip loading), and could either tap out single rounds semi-automatically or let rip at 900+ RPM on full auto. Needless to say, the target audience (China) went for it wholeheartedly, and sales only terminated when Japan joined the Axis Powers, making export to Chiang Kai-shek's Kuomintang unacceptable. Schnellfeuers are also known to have been used on both sides of the Spanish Civil War, as well as being used as a secondary Wehrmacht sidearm as well as by the Waffen-SS. Included with this particular Schnellfeuer is a set of paperwork from one Kenneth Haslett, an American solider hailing from St. Elmo, Illinois. On 28 September 1945, in an unspecified location in the European theater, then-First Sergeant Haslett declared as a war trophy "ONE (1) GERMAN MAUSER CAL 32 NO 83408", which then came home with him. On returning home, he did the proper diligence with the Treasury Department, documenting the item as a Deactivated War Trophy with a welded breech. This weld was removed at an unrecorded date, and the machine pistol issued a tax stamp; as the original registration was made prior to the 1986 cutoff, this is now a fully transferrable machine gun. Blade front and 1,000-meter tangent rear sights, with "crown/crown/U" and "Nazi Eagle" proofs on the upper left chamber flat, three-line address marks on the top flat and right side of the frame, and the Mauser banner on the left side, immediately behind the "N" and "R" marked selector switch. A set of 12-groove hardwood grips, hand-marked "GODESKI/5175" on the interiors. The included hardwood shoulder stock bears additional markings from a Joe Godeski, both ink and carved, along with a leather harness and a cleaning rod.
Class: Class III
Very fine, with 85% plus of the original blue finish, showing some bright edge wear, a few hints of gray and brown patina, and scattered handling marks. Some heat discoloration is visible around the chamber, possibly from either the original weld or the re-activation effort. The grips are good, with some minor dents. The modified replacement Model 1930 stock is good, with a long glued crack at the throat, dents, scuffs and sanding, and the harness shows wear and tear. The selector switch is currently stuck on "N" (semi-auto); otherwise the gun is mechanically fine. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Introduced due to competitive pressure from Astra's Spanish-made Broomhandle pistols, especially in the lucrative Chinese market, the 1932 Schnellfeuer took everything people loved about the Broomhandle and cranked it to 11. The result was a compact machine pistol, which could be reconfigured to a carbine as needed, feed from 10 and 20 round detachable box magazines (without sacrificing clip loading), and could either tap out single rounds semi-automatically or let rip at 900+ RPM on full auto. Needless to say, the target audience (China) went for it wholeheartedly, and sales only terminated when Japan joined the Axis Powers, making export to Chiang Kai-shek's Kuomintang unacceptable. Schnellfeuers are also known to have been used on both sides of the Spanish Civil War, as well as being used as a secondary Wehrmacht sidearm as well as by the Waffen-SS. Included with this particular Schnellfeuer is a set of paperwork from one Kenneth Haslett, an American solider hailing from St. Elmo, Illinois. On 28 September 1945, in an unspecified location in the European theater, then-First Sergeant Haslett declared as a war trophy "ONE (1) GERMAN MAUSER CAL 32 NO 83408", which then came home with him. On returning home, he did the proper diligence with the Treasury Department, documenting the item as a Deactivated War Trophy with a welded breech. This weld was removed at an unrecorded date, and the machine pistol issued a tax stamp; as the original registration was made prior to the 1986 cutoff, this is now a fully transferrable machine gun. Blade front and 1,000-meter tangent rear sights, with "crown/crown/U" and "Nazi Eagle" proofs on the upper left chamber flat, three-line address marks on the top flat and right side of the frame, and the Mauser banner on the left side, immediately behind the "N" and "R" marked selector switch. A set of 12-groove hardwood grips, hand-marked "GODESKI/5175" on the interiors. The included hardwood shoulder stock bears additional markings from a Joe Godeski, both ink and carved, along with a leather harness and a cleaning rod.
Class: Class III
Very fine, with 85% plus of the original blue finish, showing some bright edge wear, a few hints of gray and brown patina, and scattered handling marks. Some heat discoloration is visible around the chamber, possibly from either the original weld or the re-activation effort. The grips are good, with some minor dents. The modified replacement Model 1930 stock is good, with a long glued crack at the throat, dents, scuffs and sanding, and the harness shows wear and tear. The selector switch is currently stuck on "N" (semi-auto); otherwise the gun is mechanically fine. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
German - MP 40
Lot # 1512 (Sale Order: 513 of 1003)
Make: Other - ManufacturerBarrel Length: 9 3/4 inch roundModel: MP 40Caliber: 9 mm LugerStock Material: MetalCondition: Very GoodSerial #: 80jLow Estimate: 16,000High Estimate: 27,500
World War II German Fully Automatic Class III/NFA C&R MP-40 Steyr (bnz Code) Manufacture Submachine Gun with One Magazine
This is a very fine example of a WWII German MP40 Submachine gun as used by all German forces. These MP40 SMGs were highly prized as war trophies during WWII and are even more desirable today and are probably the most sought-after WWII SMGs. Typically they are called a "Schmeisser" or Machine Pistol, which stems from the model designation of Machine Pistole, while in reality the MP40 is a true submachine gun, firing from an open bolt using the 9mm Parabellum round, same as the Luger pistol. They were a marvel of wartime manufacturing using stampings combined with limited machined parts to increase manufacturing speed and reduce time and cost. They were produced by three primary factories; Erma Werke, Haenel and Steyr, with this example produced by the Steyr factory in 1942. The top of the rear receiver end cap is stamped with: "MP40/bnz/42". The left side of the receiver is marked with the serial number "80j", and the appropriate "WaA623" Waffenamts are on the various parts. It has an unusually dark brown almost maroon bakelite lower receiver cover and grip panels. The trigger group, folding buttstock, barrel nut, resting bar, bolt, firing pin and rear sight are all correctly serial numbered and matching to the receiver. This MP40 is complete with one original WWII MP40 magazine and an original WWII leather MP40 sling ink stamped "M.P.38 u.40." This example has been reactivated as there is a small welded/repaired and reblued area directly in front of the magazine well, under the front end of the receiver/breech area of the barrel. It is very nice done and is almost unnoticeable.
Class: Class III
Very fine as reactivated with 90% of the current blue finish overall with edge and high spot wear with general light thinning on the receiver and barrel with a blue/brown mix patina on the grips traps and folding buttplate. The bakelite components are all in very fine condition. It has all matching numbered parts except the aluminum resting bar under the barrel which is unnumbered. A really nice looking WWII German MP40 SMG. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a very fine example of a WWII German MP40 Submachine gun as used by all German forces. These MP40 SMGs were highly prized as war trophies during WWII and are even more desirable today and are probably the most sought-after WWII SMGs. Typically they are called a "Schmeisser" or Machine Pistol, which stems from the model designation of Machine Pistole, while in reality the MP40 is a true submachine gun, firing from an open bolt using the 9mm Parabellum round, same as the Luger pistol. They were a marvel of wartime manufacturing using stampings combined with limited machined parts to increase manufacturing speed and reduce time and cost. They were produced by three primary factories; Erma Werke, Haenel and Steyr, with this example produced by the Steyr factory in 1942. The top of the rear receiver end cap is stamped with: "MP40/bnz/42". The left side of the receiver is marked with the serial number "80j", and the appropriate "WaA623" Waffenamts are on the various parts. It has an unusually dark brown almost maroon bakelite lower receiver cover and grip panels. The trigger group, folding buttstock, barrel nut, resting bar, bolt, firing pin and rear sight are all correctly serial numbered and matching to the receiver. This MP40 is complete with one original WWII MP40 magazine and an original WWII leather MP40 sling ink stamped "M.P.38 u.40." This example has been reactivated as there is a small welded/repaired and reblued area directly in front of the magazine well, under the front end of the receiver/breech area of the barrel. It is very nice done and is almost unnoticeable.
Class: Class III
Very fine as reactivated with 90% of the current blue finish overall with edge and high spot wear with general light thinning on the receiver and barrel with a blue/brown mix patina on the grips traps and folding buttplate. The bakelite components are all in very fine condition. It has all matching numbered parts except the aluminum resting bar under the barrel which is unnumbered. A really nice looking WWII German MP40 SMG. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Erma Werke Waffenfabrik - EMP
Lot # 1513 (Sale Order: 514 of 1003)
Make: Other - ManufacturerBarrel Length: 9 1/2 inch roundModel: EMPCaliber: 9 mm LugerStock Material: Solid WoodSerial #: 17998Condition: ExcellentLow Estimate: 12,000High Estimate: 17,000
Scarce Pre-World War II German ERMA EMP Fully Automatic Class III/NFA C&R Registered 9 mm Submachine Gun
This is an excellent example of a late production, pre-war ERMA manufactured EMP 9mm submachine gun. This type of submachine gun was used heavily in the Spanish Civil war from 1936-1938 and was also very popular with early Nazi police and para-military units. It was originally designed by Henrich Vollmer in the late 1920s and was subsequently manufactured by the Erfurter Werkzeug Machinenfabrik (Erma Werke) factory in the early 1930s. The nomenclature for this weapon, "EMP", actually stands for ERMA Machinefabrik-Pistole, and they were made at the old Erfurt factory in Thurgen. Typical of early German pre-war craftsmanship, it has all machined and blued steel parts. The rear of the receiver is marked with a small single "Eagle N" commercial proof mark along with "EMP/17998". It has the late pattern two position rear sight graduated for 100 and 200 meters. It has the slotted barrel jacket and has the one-piece oak stock with the vertical foregrip. It has the two position (full and semi-automatic) selector switch on right side of the trigger guard with a unique large safety lever on the right side of the receiver that actually blocks the bolt. The barrel jacket and magazine housing are numbered "17998", and the bolt is numbered "4834". It has a blued metal finish with the bright polish bolt. It is complete with one 20 round magazine and an MP40 leather sling.
Class: Class III
Excellent with 95% of the blued finish overall with only edge and high spot wear. The bolt as noted is still in the white. The stock is in very fine condition with its original oil type finish showing slightly heavier handling marks and pressure dents on the sides in various areas. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is an excellent example of a late production, pre-war ERMA manufactured EMP 9mm submachine gun. This type of submachine gun was used heavily in the Spanish Civil war from 1936-1938 and was also very popular with early Nazi police and para-military units. It was originally designed by Henrich Vollmer in the late 1920s and was subsequently manufactured by the Erfurter Werkzeug Machinenfabrik (Erma Werke) factory in the early 1930s. The nomenclature for this weapon, "EMP", actually stands for ERMA Machinefabrik-Pistole, and they were made at the old Erfurt factory in Thurgen. Typical of early German pre-war craftsmanship, it has all machined and blued steel parts. The rear of the receiver is marked with a small single "Eagle N" commercial proof mark along with "EMP/17998". It has the late pattern two position rear sight graduated for 100 and 200 meters. It has the slotted barrel jacket and has the one-piece oak stock with the vertical foregrip. It has the two position (full and semi-automatic) selector switch on right side of the trigger guard with a unique large safety lever on the right side of the receiver that actually blocks the bolt. The barrel jacket and magazine housing are numbered "17998", and the bolt is numbered "4834". It has a blued metal finish with the bright polish bolt. It is complete with one 20 round magazine and an MP40 leather sling.
Class: Class III
Excellent with 95% of the blued finish overall with only edge and high spot wear. The bolt as noted is still in the white. The stock is in very fine condition with its original oil type finish showing slightly heavier handling marks and pressure dents on the sides in various areas. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Tula Arsenal - 1910 (Maxim MG)
Lot # 1514 (Sale Order: 515 of 1003)
Make: Other - ManufacturerModel: MG 08/15Barrel Length: 28 1/2 inch roundCaliber: 7.62x54 RStock Material: Other - Stock MaterialCondition: OtherSerial #: 5019dLow Estimate: 8,500High Estimate: 13,000Other: walnut
World War II Russian Model 1910 "Maxim" (Tula Factory) Fully Automatic Class III/NFA C&R Registered Machine Gun Assembled with a German Maxim Side Plate, Russian Wheeled Mount and Front Shield
This is a very fine example of a desirable, WWII Russian Model 1910 type machine gun part kit manufactured at the Tula Machinery Factory in 1944 that has been assembled with an original WWI German Maxim model 1908 side plate. The Russian model was basically the same design as the original WWI German Maxims only it was chambered for the standard Russian 7.62 x 54R service cartridge. The Russian models as in this case were equipped with a large wheeled "sokolov" mount with a front steel glacis armour plate. The top cover is marked with the large Russian "Star with the Arrow inside", identifying its as a Tula manufactured weapon along with "1944", the date of manufacture. The original side plate is correctly stamped with the Imperial German "Crown/D" factory proofs over serial number "5019d". This part kit has almost visible all matching numbers except for the side plate, the side mounted recoil spring housing and rear support block on the left side. The noted factory is not the regular Tula Arsenal rifle factory but a separate facility that manufactured Maxims from 1938 thru 1945. This original Maxim weapon was designed/developed by Hiram Maxim in 1883-1884 and was one of the most influential weapons of the 20th century. These were actually the first self-sustaining heavy MGs used in any sizeable numbers on the battlefield and are able to lay down a sustained suppressive fire without any other external means other than by the energy generated from the force of firing a round. It was adopted by the British Army in 1880, the Imperial Germany Army in 1899 and the Russian Army in 1905. These weapons are easy to identify as they have a large round steel water jacket around the barrel which held seven quarts of water intending to cool the barrel during heavy firing, and the Russian version had a very unique extremely large, "tractor cap" mounted on top of the water jacket which allow the machine gun crew to easily fill the water jacket with hands full of snow during the winter to augment the water supply when everything was frozen. Interestingly this tractor cap design was actually copied from the Finnish version of the Maxim MGs based on captured MGs during the Russo-Finish War (1938-40). This large water jacket held approximately 7 quarts of water which allowed the machine gun to fire long, sustained bursts of fire for approximately 500 rounds before the water started to boil. At approximately 2,000 rounds of sustained fire, the water would all boil off, and the water jacket had to be refilled. It has the original flip-up tangent style rear sight graduated from 400-2,000 meters, a simple inverted "v" front sight and still retains its original large Maxim steel water jacket. It comes with an original wheeled mount, front armour plate, and a Russian support kit.
Class: Class III
Fine with 90% of a professionally reblued metal finish that has all matching colors overall showing only light wear from handling. The front water jacket, complete wheeled mount and front armour plate also retains 95% of a very nice WWII flat green painted finish that nicely compliments the weapon. A very nice looking and highly desirable example of a WWII Russian M1910 Maxim. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a very fine example of a desirable, WWII Russian Model 1910 type machine gun part kit manufactured at the Tula Machinery Factory in 1944 that has been assembled with an original WWI German Maxim model 1908 side plate. The Russian model was basically the same design as the original WWI German Maxims only it was chambered for the standard Russian 7.62 x 54R service cartridge. The Russian models as in this case were equipped with a large wheeled "sokolov" mount with a front steel glacis armour plate. The top cover is marked with the large Russian "Star with the Arrow inside", identifying its as a Tula manufactured weapon along with "1944", the date of manufacture. The original side plate is correctly stamped with the Imperial German "Crown/D" factory proofs over serial number "5019d". This part kit has almost visible all matching numbers except for the side plate, the side mounted recoil spring housing and rear support block on the left side. The noted factory is not the regular Tula Arsenal rifle factory but a separate facility that manufactured Maxims from 1938 thru 1945. This original Maxim weapon was designed/developed by Hiram Maxim in 1883-1884 and was one of the most influential weapons of the 20th century. These were actually the first self-sustaining heavy MGs used in any sizeable numbers on the battlefield and are able to lay down a sustained suppressive fire without any other external means other than by the energy generated from the force of firing a round. It was adopted by the British Army in 1880, the Imperial Germany Army in 1899 and the Russian Army in 1905. These weapons are easy to identify as they have a large round steel water jacket around the barrel which held seven quarts of water intending to cool the barrel during heavy firing, and the Russian version had a very unique extremely large, "tractor cap" mounted on top of the water jacket which allow the machine gun crew to easily fill the water jacket with hands full of snow during the winter to augment the water supply when everything was frozen. Interestingly this tractor cap design was actually copied from the Finnish version of the Maxim MGs based on captured MGs during the Russo-Finish War (1938-40). This large water jacket held approximately 7 quarts of water which allowed the machine gun to fire long, sustained bursts of fire for approximately 500 rounds before the water started to boil. At approximately 2,000 rounds of sustained fire, the water would all boil off, and the water jacket had to be refilled. It has the original flip-up tangent style rear sight graduated from 400-2,000 meters, a simple inverted "v" front sight and still retains its original large Maxim steel water jacket. It comes with an original wheeled mount, front armour plate, and a Russian support kit.
Class: Class III
Fine with 90% of a professionally reblued metal finish that has all matching colors overall showing only light wear from handling. The front water jacket, complete wheeled mount and front armour plate also retains 95% of a very nice WWII flat green painted finish that nicely compliments the weapon. A very nice looking and highly desirable example of a WWII Russian M1910 Maxim. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Soviet PPSH41 SMG, Ex. Mags, Fully Transferrable
Lot # 1515 (Sale Order: 516 of 1003)
Make: Other - ManufacturerBarrel Length: 10 1/2 inch roundModel: PPSH-41Caliber: 7.62 mmStock Material: Solid WoodSerial #: 7891Condition: GoodLow Estimate: 18,000High Estimate: 27,500
Soviet 1944 World War II Production PPSh-41 Submachine Gun, Class III/NFA C&R Fully Transferrable Machine Gun, with Several Extra Magazines and Accessories
Developed by Soviet arms designer Georgy Shpagin, the PPSh-41 was the go-to infantry submachine gun for the USSR in World War II, produced in quantity and fielded the full width of the Eastern Front. Similar to other popular SMGs of the day, the PPSh was a blowback-driven open-bolt design, using as many stamped components as possible and an interesting production expedient for the barrel; one could make 2 PPSh barrels by cutting a Mosin-Nagant barrel in half and machining a new 7.62x25mm breech. Fielded by the Red Army and air-dropped to Soviet-friendly partisan forces, the SMG was also used by the Nazis (both in original 7.62 and re-chambered for 9mm Parabellum). After the war, large quantities were supplied to the Korean People's Army and the Chinese People's Volunteer Army, both of which deployed them en masse for the Korean War; while outstripped by the American M1 rifle and M2 carbine in terms of range and accuracy, they provided brutal up-close firepower during raids and night battles. Blade front and two-leaf rear sights, with an integral muzzle brake in the ventilated heat shield, marked "1944" ahead of the ejector port, with a two position selector switch (full/semi) inside the triggerguard. Fitted with a smooth one piece hardwood stock, with a leather and canvas sling and a steel buttplate. Included with the SMG is one extra drum magazine, a spare bolt and trigger group, and nine stick magazines in three canvas pouches.
Class: Class III
Very good. The metal shows a mixed brown and gray patina overall, with mild spotting and handling marks. The stock shows some cracking around and ahead of the wrist and near the buttplate, along with some scuffs and dings. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Developed by Soviet arms designer Georgy Shpagin, the PPSh-41 was the go-to infantry submachine gun for the USSR in World War II, produced in quantity and fielded the full width of the Eastern Front. Similar to other popular SMGs of the day, the PPSh was a blowback-driven open-bolt design, using as many stamped components as possible and an interesting production expedient for the barrel; one could make 2 PPSh barrels by cutting a Mosin-Nagant barrel in half and machining a new 7.62x25mm breech. Fielded by the Red Army and air-dropped to Soviet-friendly partisan forces, the SMG was also used by the Nazis (both in original 7.62 and re-chambered for 9mm Parabellum). After the war, large quantities were supplied to the Korean People's Army and the Chinese People's Volunteer Army, both of which deployed them en masse for the Korean War; while outstripped by the American M1 rifle and M2 carbine in terms of range and accuracy, they provided brutal up-close firepower during raids and night battles. Blade front and two-leaf rear sights, with an integral muzzle brake in the ventilated heat shield, marked "1944" ahead of the ejector port, with a two position selector switch (full/semi) inside the triggerguard. Fitted with a smooth one piece hardwood stock, with a leather and canvas sling and a steel buttplate. Included with the SMG is one extra drum magazine, a spare bolt and trigger group, and nine stick magazines in three canvas pouches.
Class: Class III
Very good. The metal shows a mixed brown and gray patina overall, with mild spotting and handling marks. The stock shows some cracking around and ahead of the wrist and near the buttplate, along with some scuffs and dings. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
German - MG42
Lot # 1516 (Sale Order: 517 of 1003)
Make: Other - ManufacturerBarrel Length: 21 inch roundModel: MG42Caliber: 7.92 mm MauserStock Material: Solid WoodCondition: OtherSerial #: 8103oLow Estimate: 25,000High Estimate: 37,500
Highly Desirable Fully Automatic Class III/NFA C&R World War II Nazi MG-42 (code swd) MAGET Machine Gun with Anti-Aircraft Mount and Drum Magazine
This is a solid representative example of a WWII German MG42 light machine gun. This is a fairly rare example as it was manufactured in 1944, by the MAGET (Maschinen und Geraetetbau GmbH) factory in Berlin. They originally used the wartime code of "cra" which was changed in 1943 to "swd". Due to their extremely high cyclic rate of fire of approximately 1,200 rounds per minute, the GIs termed them "Hitler’s Buzz Saw" as it was so fast that you could not distinguish the individual rounds being fired. Of all the German machine gun during WWII this model was probably the most feared weapon on the battlefield. The MG42 was actually an improvement over the early MG-34 (which used all fully machined and hand fitted parts and assemblies). The MG-42 used new manufacturing techniques such as stamped steel parts that were welded or riveted together combined with limited machined parts. In this example, the receiver was made from stamped steel sections, with a perforated barrel jacket with both welded/mated to the machined center section and top cover support with a stamped top cover. It used riveted bolt rails guides inside the receiver. The complete bolt and barrel were made from traditional machined parts. The buttstock was made from walnut, and the pistol grip plates were made from bakelite. They were mass produced and so highly effective that the German factories manufactured well over 400,000 before the end of the war. They were easily transported, and they were the cornerstone of the German infantry company. They were so effective that during WWII the U.S. Army tested the design and in the post war years actually copied much of the design during the development of the M-60 machine gun. This weapon had several innovative features, such as the new delayed roller-block locking system and the quick change barrel. This last feature was so important as it allowed the machine gunner to rapidly change out a hot barrel during battle without any tools. This extended and preserved the barrel life and also prevented cook-offs. These features were years ahead of anything that the Allies had. These weapons were made by four primary companies: Mauser, MAGET of Berlin, Gustloff Werke, and Steyr. This example, as noted, was manufactured by the MAGET factory. The left side of the receiver is marked "NC/MG 42/8103o/swd" the war time code for the MAGET factory as manufactured in 1944, (code NC). The machined top cover center support has an unreadable war time code with a Waffenamt proof on top. The stamped top cover does not carry a wartime code, and the top of the bolt is stamped with an "eagle/WaA180" Waffenamt. The machine gun has a matching barrel numbered "8103o" with the barrel extension stamped "cra" indicating manufacture by MAGET. Most of the various parts carry some kind of a German WWII Waffenamt proof. It has the original folding front sight and tangent rear marked 2-20 (200-2,000 meters). It has an earlier unmarked wooden buttstock. It is complete with one side mounted drum/basket magazine and an original, WWII, folding tripod mount that is marked on the side "bgs/19".
Class: Class III
Very fine with 98% of a dark almost black late war/post-war type finish that shows almost no wear overall. The laminated buttstock is in very good condition with a darker color overall showing light handling marks and scratches on the sides. The tripod/mount retains 85% of its original desert tan colored painted finish with general light wear from handing and use over the years. This is a really super nice high condition correct WWII German MG-42 machine gun. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a solid representative example of a WWII German MG42 light machine gun. This is a fairly rare example as it was manufactured in 1944, by the MAGET (Maschinen und Geraetetbau GmbH) factory in Berlin. They originally used the wartime code of "cra" which was changed in 1943 to "swd". Due to their extremely high cyclic rate of fire of approximately 1,200 rounds per minute, the GIs termed them "Hitler’s Buzz Saw" as it was so fast that you could not distinguish the individual rounds being fired. Of all the German machine gun during WWII this model was probably the most feared weapon on the battlefield. The MG42 was actually an improvement over the early MG-34 (which used all fully machined and hand fitted parts and assemblies). The MG-42 used new manufacturing techniques such as stamped steel parts that were welded or riveted together combined with limited machined parts. In this example, the receiver was made from stamped steel sections, with a perforated barrel jacket with both welded/mated to the machined center section and top cover support with a stamped top cover. It used riveted bolt rails guides inside the receiver. The complete bolt and barrel were made from traditional machined parts. The buttstock was made from walnut, and the pistol grip plates were made from bakelite. They were mass produced and so highly effective that the German factories manufactured well over 400,000 before the end of the war. They were easily transported, and they were the cornerstone of the German infantry company. They were so effective that during WWII the U.S. Army tested the design and in the post war years actually copied much of the design during the development of the M-60 machine gun. This weapon had several innovative features, such as the new delayed roller-block locking system and the quick change barrel. This last feature was so important as it allowed the machine gunner to rapidly change out a hot barrel during battle without any tools. This extended and preserved the barrel life and also prevented cook-offs. These features were years ahead of anything that the Allies had. These weapons were made by four primary companies: Mauser, MAGET of Berlin, Gustloff Werke, and Steyr. This example, as noted, was manufactured by the MAGET factory. The left side of the receiver is marked "NC/MG 42/8103o/swd" the war time code for the MAGET factory as manufactured in 1944, (code NC). The machined top cover center support has an unreadable war time code with a Waffenamt proof on top. The stamped top cover does not carry a wartime code, and the top of the bolt is stamped with an "eagle/WaA180" Waffenamt. The machine gun has a matching barrel numbered "8103o" with the barrel extension stamped "cra" indicating manufacture by MAGET. Most of the various parts carry some kind of a German WWII Waffenamt proof. It has the original folding front sight and tangent rear marked 2-20 (200-2,000 meters). It has an earlier unmarked wooden buttstock. It is complete with one side mounted drum/basket magazine and an original, WWII, folding tripod mount that is marked on the side "bgs/19".
Class: Class III
Very fine with 98% of a dark almost black late war/post-war type finish that shows almost no wear overall. The laminated buttstock is in very good condition with a darker color overall showing light handling marks and scratches on the sides. The tripod/mount retains 85% of its original desert tan colored painted finish with general light wear from handing and use over the years. This is a really super nice high condition correct WWII German MG-42 machine gun. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
1942 Dated World War II "fsu" Code Field Mount for a MG42 Machin
Lot # 1517 (Sale Order: 518 of 1003)
Make: Other - ManufacturerModel: NoneCaliber: N/AStock Material: Other - Stock MaterialCondition: Very GoodSerial #: NSNLow Estimate: 1,100High Estimate: 1,600
1942 Dated World War II "fsu" Code Field Mount for a MG42 Machine Gun
Designed to be carried on the back of an assistant gunner, the field mount for the MG42 machine gun could be rapidly unfolded to serve as an adjustable tripod or as the base for an anti-aircraft pintle mount (not included). Marked "1942/fsu 3183" flanked by partially legible Waffenamt stamps on top, with a green paint finish overall, a pair of brown leather shoulder straps and a pair of leather pads on the front leg, as well as a small metal tool compartment on the left side. The side of the traverse and elevation mechanism is stamped "axx/1942/7906".
Class: Other
Fine as arsenal repainted. 70% green painted finish remains with areas of chipping and rough handling marks revealing the red and tan undercoats, oxidation, and some visible roughness under the green paint. The leather is about good with scuffs and staining and tight stitching.
Designed to be carried on the back of an assistant gunner, the field mount for the MG42 machine gun could be rapidly unfolded to serve as an adjustable tripod or as the base for an anti-aircraft pintle mount (not included). Marked "1942/fsu 3183" flanked by partially legible Waffenamt stamps on top, with a green paint finish overall, a pair of brown leather shoulder straps and a pair of leather pads on the front leg, as well as a small metal tool compartment on the left side. The side of the traverse and elevation mechanism is stamped "axx/1942/7906".
Class: Other
Fine as arsenal repainted. 70% green painted finish remains with areas of chipping and rough handling marks revealing the red and tan undercoats, oxidation, and some visible roughness under the green paint. The leather is about good with scuffs and staining and tight stitching.
DWM - MG 08
Lot # 1518 (Sale Order: 519 of 1003)
Make: Other - ManufacturerModel: MG 08Barrel Length: 24 inch roundCaliber: 7.92 mm MauserStock Material: Other - Stock MaterialCondition: Very GoodSerial #: 43402Low Estimate: 16,000High Estimate: 25,000Other: walnut
Desirable World War I Imperial German Army Maxim Model 1908 (DWM) Fully Automatic Class III/NFA C&R Registered Heavy Machine Gun with Sled Mount and Accessories
This is a very fine example of an original WWI German Maxim heavy machine gun manufactured in 1918 by the DWM factory. This weapon system was originally developed by Hiram Maxim in the 1883-1884 time frame with the design finalized 1885. It became one of the most influential weapons of the 20th century, specifically during WWI as it was the first true self-sustaining machine gun that could fire in a fully-automatic mode without external means. Germany officially adopted the weapon in 1899 and used it throughout WWI and well into the Weimar period. The British Army are credited with being the first country to recognize it importance and the first to officially adopted it and to use it in battle in the late 1880s.This example is a late "1918" production model with serial number "43402". It has some matching visible serial numbers to include the top cover, water jacket, back plate/butterfly trigger mechanism and spade grip assembly. It has a mismatched bolt assembly and feed mechanism, and it has a newly made flash hider. The top cover is marked: "43402/M.G.0.8./D.W.M./BERLIN/1918". The tangent style rear sight is graduated from calibrated from 400-2,000 meters with a simple inverted "V" front sight that is fitted to the front of the water jacket. The water jacket held seven (7) quarts of water that would allow the machine gunner to fire long bursts of intermittent, sustained fire. After approximately 500 rounds of fire, the water would started to boil and would completely boil off/evaporate after 2,000 rounds. During WWI this weapon would wreak havoc and devastation in the large open field battles in France and Germany where it was nicknamed the "Devils Paintbrush" because of the thousands of soldiers it killed. This single weapon changed the tactics of land warfare forever. It comes with an original WWI sled mount, two small metal German ammo cans with 2 cloth ammunition belts, a large wooden storage box that contains an ammunition belt loading machine, a spare barrel attached to the mount, an extra feed mechanism, and two optical training devices.
Class: Class III
Very fine with 80% plus of the original blue finish overall with the water jacket painted a old olive green color on the outside. The large sled/mount is also in very good condition with 45% plus of he original green painted exterior finish that has generally flaked off overall with the balance a brown patina overall. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a very fine example of an original WWI German Maxim heavy machine gun manufactured in 1918 by the DWM factory. This weapon system was originally developed by Hiram Maxim in the 1883-1884 time frame with the design finalized 1885. It became one of the most influential weapons of the 20th century, specifically during WWI as it was the first true self-sustaining machine gun that could fire in a fully-automatic mode without external means. Germany officially adopted the weapon in 1899 and used it throughout WWI and well into the Weimar period. The British Army are credited with being the first country to recognize it importance and the first to officially adopted it and to use it in battle in the late 1880s.This example is a late "1918" production model with serial number "43402". It has some matching visible serial numbers to include the top cover, water jacket, back plate/butterfly trigger mechanism and spade grip assembly. It has a mismatched bolt assembly and feed mechanism, and it has a newly made flash hider. The top cover is marked: "43402/M.G.0.8./D.W.M./BERLIN/1918". The tangent style rear sight is graduated from calibrated from 400-2,000 meters with a simple inverted "V" front sight that is fitted to the front of the water jacket. The water jacket held seven (7) quarts of water that would allow the machine gunner to fire long bursts of intermittent, sustained fire. After approximately 500 rounds of fire, the water would started to boil and would completely boil off/evaporate after 2,000 rounds. During WWI this weapon would wreak havoc and devastation in the large open field battles in France and Germany where it was nicknamed the "Devils Paintbrush" because of the thousands of soldiers it killed. This single weapon changed the tactics of land warfare forever. It comes with an original WWI sled mount, two small metal German ammo cans with 2 cloth ammunition belts, a large wooden storage box that contains an ammunition belt loading machine, a spare barrel attached to the mount, an extra feed mechanism, and two optical training devices.
Class: Class III
Very fine with 80% plus of the original blue finish overall with the water jacket painted a old olive green color on the outside. The large sled/mount is also in very good condition with 45% plus of he original green painted exterior finish that has generally flaked off overall with the balance a brown patina overall. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
German - MP 40
Lot # 1519 (Sale Order: 520 of 1003)
Make: Other - ManufacturerBarrel Length: 9 3/4 inch roundModel: MP 40Caliber: 9 mm LugerStock Material: Other - Stock MaterialCondition: Very GoodSerial #: 7938oLow Estimate: 18,000High Estimate: 27,500Other: plastic
World War II German Fully Automatic Class III/NFA C&R Registered MP-40 (fxo Code) Submachine Gun
This is a very fine example of a WWII German MP-40 submachine gun. Typically the MP-40s were called a "Schmeisser"; however, they are actually a "Machine Pistole" which derives from the Germans use of "MP" in their model numbers. They used many wartime stampings combined with limited machined parts to reduce manufacturing time and reduce cost. They were produced by three factories: Erma Werke, Haenel and Steyr, with this example produced by the Haenel factory in 1942. The rear receiver end cap is stamped with: "MP40/fxo 42/7938o cos". The left side of the receiver tube, barrel nut and barrel are stamped with serial number "7938o" and with the appropriate "WaA37" and WaA44" Waffenamt proofs. Additionally, the other smaller parts are correctly stamped with serial numbers "7938" or "938" as appropriate. It has the traditional dark red bakelite grips and lower receiver cover. This MP-40 is complete with one original WWII "MP38 U. 40" marked magazine that is proofed on the back side with a maker's code of "kur 43" over two "WaA815" Waffenamt proofs.
Class: Class III
Very fine with 70% plus of the original blued finish overall with edge and high spot wear overall with a the balance a mixed brown patina finish. The trigger housing cover and grip panels are all in fine condition showing a nice original color with light handling marks and pressure dents on the sides in some areas. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a very fine example of a WWII German MP-40 submachine gun. Typically the MP-40s were called a "Schmeisser"; however, they are actually a "Machine Pistole" which derives from the Germans use of "MP" in their model numbers. They used many wartime stampings combined with limited machined parts to reduce manufacturing time and reduce cost. They were produced by three factories: Erma Werke, Haenel and Steyr, with this example produced by the Haenel factory in 1942. The rear receiver end cap is stamped with: "MP40/fxo 42/7938o cos". The left side of the receiver tube, barrel nut and barrel are stamped with serial number "7938o" and with the appropriate "WaA37" and WaA44" Waffenamt proofs. Additionally, the other smaller parts are correctly stamped with serial numbers "7938" or "938" as appropriate. It has the traditional dark red bakelite grips and lower receiver cover. This MP-40 is complete with one original WWII "MP38 U. 40" marked magazine that is proofed on the back side with a maker's code of "kur 43" over two "WaA815" Waffenamt proofs.
Class: Class III
Very fine with 70% plus of the original blued finish overall with edge and high spot wear overall with a the balance a mixed brown patina finish. The trigger housing cover and grip panels are all in fine condition showing a nice original color with light handling marks and pressure dents on the sides in some areas. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Kokura - Type 99 (LMG)
Lot # 1520 (Sale Order: 521 of 1003)
Make: Other - ManufacturerBarrel Length: 22 inch roundModel: Type 99 (LMG)Caliber: 7.7 mm JapaneseStock Material: Solid WoodCondition: Very Good to ExcellentSerial #: 9811Low Estimate: 12,000High Estimate: 18,000
Desirable Late World War II Production Fully Automatic Class III/NFA C&R Japanese Type 99 Light Machine Gun with Scarce Optical Sight
This is an very fine example of a late WWII Japanese Type 99 LMG that is fitted with one of the scarce late war optical sights manufactured by the Kokura Arsenal. This model was developed in 1939 as a replacement for the Type 96 LMG and fired the new, heavier, standard 7.7mm Japanese cartridge. It was a very successful light machine gun that was used throughout the war by the Japanese forces in all of the various homeland islands and occupied territories. They are very similar to the earlier Type 96 in configuration and function, but they have a forward mounted folding bipod, a new finned quick change barrel with a top mounted carrying handle and a fully adjustable mono-pod attached to the underside of the buttstock. These were very well made machine guns that featured all machined parts and hardwood buttstocks and pistol grips. The right side of the receiver has the four intertwined cannon balls of the Kokura Arsenal next to the arsenal inspector's mark and several Kana markings/the series mark/9811over the Showa date of 18.11 (November 1943). This really nice example has a matching bolt that is numbered "9811" with the barrel double stamped by the factory with "9811"/Showa date of 18.12 with a second serial number of "14811", obviously the barrel was reallocated to this machine gun before being issued. It is fitted with an original late war optical sighting device that is mounted on top and to the right side of the receiver. The sight is marked with "2.5 X 13 (degrees)/factory symbol/TOKO/No. 3343", with gun number "2965" stamped in the left upper corner. The sight has a range finding reticle that is graduated 1-14 (100-1400 meters). It is complete with its original bipod, the noted scope and original canvas scope case, and one original 30 round magazine. This weapon hand cycles and dry fires correctly.
Class: Class III
Very fine with 85% plus of the original blue finish overall, general light wear and finish loss on the edges and high spots, and some minor browning on the sides of the receiver. The buttstock, pistol grip and carrying handle are all in fine condition with their nice original orangish type color and some minor light chips around the edges of the pistol grip and carrying handle. The buttstock is all in very fine condition with only a few minor handling marks. A really super clean WWII Japanese Type 99 medium machine gun. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is an very fine example of a late WWII Japanese Type 99 LMG that is fitted with one of the scarce late war optical sights manufactured by the Kokura Arsenal. This model was developed in 1939 as a replacement for the Type 96 LMG and fired the new, heavier, standard 7.7mm Japanese cartridge. It was a very successful light machine gun that was used throughout the war by the Japanese forces in all of the various homeland islands and occupied territories. They are very similar to the earlier Type 96 in configuration and function, but they have a forward mounted folding bipod, a new finned quick change barrel with a top mounted carrying handle and a fully adjustable mono-pod attached to the underside of the buttstock. These were very well made machine guns that featured all machined parts and hardwood buttstocks and pistol grips. The right side of the receiver has the four intertwined cannon balls of the Kokura Arsenal next to the arsenal inspector's mark and several Kana markings/the series mark/9811over the Showa date of 18.11 (November 1943). This really nice example has a matching bolt that is numbered "9811" with the barrel double stamped by the factory with "9811"/Showa date of 18.12 with a second serial number of "14811", obviously the barrel was reallocated to this machine gun before being issued. It is fitted with an original late war optical sighting device that is mounted on top and to the right side of the receiver. The sight is marked with "2.5 X 13 (degrees)/factory symbol/TOKO/No. 3343", with gun number "2965" stamped in the left upper corner. The sight has a range finding reticle that is graduated 1-14 (100-1400 meters). It is complete with its original bipod, the noted scope and original canvas scope case, and one original 30 round magazine. This weapon hand cycles and dry fires correctly.
Class: Class III
Very fine with 85% plus of the original blue finish overall, general light wear and finish loss on the edges and high spots, and some minor browning on the sides of the receiver. The buttstock, pistol grip and carrying handle are all in fine condition with their nice original orangish type color and some minor light chips around the edges of the pistol grip and carrying handle. The buttstock is all in very fine condition with only a few minor handling marks. A really super clean WWII Japanese Type 99 medium machine gun. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
BSA 1914 Lewis Gun, Registered Transferrable, Ex. Mags, Case
Lot # 1521 (Sale Order: 522 of 1003)
Make: BSA ImportsModel: 1914Barrel Length: 26 inch roundCaliber: 303 BritishStock Material: Other - Stock MaterialSerial #: A50287Condition: GoodLow Estimate: 14,000High Estimate: 22,500Other: hardwood
Birmingham Small Arms Model 1914 Lewis Machine Gun, Class III/NFA C&R Machine Gun, Registered Fully Transferrable, Attributed as an Imperial Japanese Naval Landing Force Weapon Captured at Saipan, with Extra Magazines, Accessories and Case
Originally developed prior to World War One, the Lewis was one of the lightest machine guns of the era, weighing in at about 28 pounds. The inventor, Lieutenant Colonel Issac Newton Lewis, established a firm in Belgium to license the design to arms manufacturers, finding interested parties at Birmingham Small Arms of Britain and Savage Arms of the United States, and both countries would take the Lewis into combat during World War One as infantry machine guns and in aircraft and vehicle mountings. Later, the Japanese would show an interest, with the Imperial Japanese Navy adapting an unshrouded variant as the Type 92 and reportedly issuing standard models to the Naval Landing Forces; this particular Lewis is attributed by the consignor as a trophy taken by an unnamed American Marine following the amphibious landing on Saipan. Research provided by the consignor attributes 3 IJN units as active on Saipan during the battle; the 55th and 41st Naval Guard Forces and the 1st Yokosuka Special Landing Force. Brought back to the United States, the first hard documentation for the gun is a 1968 Amnesty Registration that puts it in Portland, Oregon, with a claimed acquisition date of January 1 of the same year. Blade front and folding ladder rear sights are installed, the latter also featuring an attached brass volley sight on top of the staff. The distinctive aluminum cooling fins and barrel shroud are present, the latter bearing a prominent untranslated Japanese marking on top, with a leather wrap on the swiveling front grip, a hardwood pistol grip, and a leather wrapped "spade" grip at the rear. The spade configuration was traditionally used for fixed positions, like aircraft mounts or bunkers, granting good control of the weapon in spaces too tight for a conventional stock. Also included with the lot is a brass-cornered hardwood custom case, extra barrel, two loading tools, a detached buttstock, two user manuals, and two extra magazines in a canvas case.
Class: Class III
Fine with 50% of the original blue finish, showing a mixed brown patina, scattered spotting and handling marks. The top of the barrel shroud has a small hole, possibly a former mounting point for an anti-aircraft sight. The grips show mild wear, and the included buttstock shows numerous dents and some bending of the buttplate. The case is very good. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Originally developed prior to World War One, the Lewis was one of the lightest machine guns of the era, weighing in at about 28 pounds. The inventor, Lieutenant Colonel Issac Newton Lewis, established a firm in Belgium to license the design to arms manufacturers, finding interested parties at Birmingham Small Arms of Britain and Savage Arms of the United States, and both countries would take the Lewis into combat during World War One as infantry machine guns and in aircraft and vehicle mountings. Later, the Japanese would show an interest, with the Imperial Japanese Navy adapting an unshrouded variant as the Type 92 and reportedly issuing standard models to the Naval Landing Forces; this particular Lewis is attributed by the consignor as a trophy taken by an unnamed American Marine following the amphibious landing on Saipan. Research provided by the consignor attributes 3 IJN units as active on Saipan during the battle; the 55th and 41st Naval Guard Forces and the 1st Yokosuka Special Landing Force. Brought back to the United States, the first hard documentation for the gun is a 1968 Amnesty Registration that puts it in Portland, Oregon, with a claimed acquisition date of January 1 of the same year. Blade front and folding ladder rear sights are installed, the latter also featuring an attached brass volley sight on top of the staff. The distinctive aluminum cooling fins and barrel shroud are present, the latter bearing a prominent untranslated Japanese marking on top, with a leather wrap on the swiveling front grip, a hardwood pistol grip, and a leather wrapped "spade" grip at the rear. The spade configuration was traditionally used for fixed positions, like aircraft mounts or bunkers, granting good control of the weapon in spaces too tight for a conventional stock. Also included with the lot is a brass-cornered hardwood custom case, extra barrel, two loading tools, a detached buttstock, two user manuals, and two extra magazines in a canvas case.
Class: Class III
Fine with 50% of the original blue finish, showing a mixed brown patina, scattered spotting and handling marks. The top of the barrel shroud has a small hole, possibly a former mounting point for an anti-aircraft sight. The grips show mild wear, and the included buttstock shows numerous dents and some bending of the buttplate. The case is very good. Mechanically excellent. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Chinese Contract Long Branch STEN MKII SMG w/Mags,'68 Registered
Lot # 1522 (Sale Order: 523 of 1003)
Make: Other - ManufacturerModel: STEN MK IIBarrel Length: 8 inch roundCaliber: 9 mmStock Material: MetalCondition: OtherSerial #: 12L5310Low Estimate: 5,500High Estimate: 7,500
Chinese Contract Long Branch STEN Mark II Submachine Gun, Class III/NFA C&R Machine Gun, Fully Transferrable, with Twelve Extra Magazines, Bayonet, and Other Accessories
Manufactured in Canada in 1945, this STEN Mark II submachine gun was ordered by the Chinese government, and bears their nomenclature on top of the magazine well. One of the signature Commonwealth weapons of WWII, the STEN was largely constructed from tube steel and metal stampings, a significant departure from the previous generation of beautiful but expensive SMGs, giving the Allies a light, effective, and inexpensive close-quarters weapon. Long Branch STENs wound up on both sides of the Nationalist/Communist Chinese split, with many in inventory converted to 7.62 Tokarev and used in the Korean War. Blade front and peep rear sights, with the Chinese markings (essentially "Made in Canada, STEN Machine Gun") on top and the Long Branch model, serial number and date on the underside. A two-position "R" and "A" marked selector switch is installed on the trigger group, with occasional "Broad Arrow" proofs and a tubular steel buttstock. A number of accessories are included; three loading tools, a blued steel pistol grip, a STEN-compatible bayonet (spike configuration, 11 1/2" OAL, 7 1/2" blade, slots over barrel and interfaces with heat shield), a spare buttstock configured to carry the bayonet, two magazine pouches (one unmarked canvas with leather trim, one U.S.-marked canvas), and twelve extra magazines.
Class: Class III
Very fine, with 70% of the thin arsenal phosphate finish, showing some bright edge wear, scattered scuffs and handling marks, and areas of brown patina. The magazine well markings are crisp. Mechanically needs some adjustment, as the action cycles full automatic only. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Manufactured in Canada in 1945, this STEN Mark II submachine gun was ordered by the Chinese government, and bears their nomenclature on top of the magazine well. One of the signature Commonwealth weapons of WWII, the STEN was largely constructed from tube steel and metal stampings, a significant departure from the previous generation of beautiful but expensive SMGs, giving the Allies a light, effective, and inexpensive close-quarters weapon. Long Branch STENs wound up on both sides of the Nationalist/Communist Chinese split, with many in inventory converted to 7.62 Tokarev and used in the Korean War. Blade front and peep rear sights, with the Chinese markings (essentially "Made in Canada, STEN Machine Gun") on top and the Long Branch model, serial number and date on the underside. A two-position "R" and "A" marked selector switch is installed on the trigger group, with occasional "Broad Arrow" proofs and a tubular steel buttstock. A number of accessories are included; three loading tools, a blued steel pistol grip, a STEN-compatible bayonet (spike configuration, 11 1/2" OAL, 7 1/2" blade, slots over barrel and interfaces with heat shield), a spare buttstock configured to carry the bayonet, two magazine pouches (one unmarked canvas with leather trim, one U.S.-marked canvas), and twelve extra magazines.
Class: Class III
Very fine, with 70% of the thin arsenal phosphate finish, showing some bright edge wear, scattered scuffs and handling marks, and areas of brown patina. The magazine well markings are crisp. Mechanically needs some adjustment, as the action cycles full automatic only. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Kokura - Type 99 (LMG)
Lot # 1523 (Sale Order: 524 of 1003)
Make: Other - ManufacturerBarrel Length: 22 inch roundModel: Type 99 (LMG)Caliber: 7.7 mm JapaneseStock Material: Solid WoodCondition: Very GoodSerial #: 2961Low Estimate: 11,000High Estimate: 16,000Other: hardwood
Scarce World War II Japanese Type 99 Class III/NFA C&R Registered Fully Automatic Type 99 Light Machine Gun Documented to U.S. World War II Veteran
This is a very fine example of an early production, fully operational WWII Japanese Type 99 LMG manufactured under the control of the Kokura Arsenal and documented to World War II veteran U.S. Army Staff Sergeant Jack C. Santelli. The Type 99 was developed in 1939 as a replacement for the Type 96 LMG and was used throughout the war by all Japanese forces on the Japanese held islands and mainland China. They are similar to the Type 96 but had a forward mounted folding bipod, a finned quick change barrel with a top mounted carrying handle and a fully adjustable mono-pod attached to the underside of the buttstock. These were very well-made machine guns that featured all machined parts and hardwood buttstocks and pistol grips. The right side of the receiver has the four intertwined cannon balls of the Kokura Arsenal over serial number (2961) followed by the 35th series arsenal mark followed by the Showa date of 18.1 (January 1943). It is fitted with a hardwood buttstock, pistol grip and carrying handle. The left side of the buttstock has one of the WWII Japanese helmet star emblems. It is complete with a late WWII Japanese Type 30 bayonet made under the control of the Kokura Arsenal featuring a blued blade and "Arrow/M" maker’s mark. Also included with this lot is a newly manufactured 30 round magazine, GI brass cleaning rod, spare (original) operating rod, and recoil spring guide. Accompanying this machine gun are the following documents: an original WWII capture paper listing an unidentified “rifle-Japanese” and “bayonet with scabbard” entitled to Staff Sergeant Jack C. Santelli, a 1987 dated Commonwealth of Virginia application for registration of machine gun indicating Jack C. Santelli as the owner of this weapon, a 1987 dated letter written by Sheriff W.F. Kelley to the ATF attesting “Mr. Santelli is the true owner of this firearm which is on temporary loan to the Southwest Virginia Museum located at Big Stone Gap, Virginia,” a 1954 dated contract of deposit stating Santelli deposited “1 Japanese Machine Gun” to the custody of the Southwest Virginia Museum, registration of this firearm by the Southwest Virginia Museum in compliance to the Gun Control Act of 1968, a 1987 dated ATF application for transfer and registration of firearm showing that this machine gun was transferred to Santelli from the Southwest Virginia Museum, and a 2017 dated ATF application for transfer and registration of firearm showing that this machine gun was transferred from Santelli’s daughter, Diana Santelli, to the executor of her estate following her death in 2016. U.S. Army Staff Sergeant Jack C. Santelli, Combat Engineers, Infantry, Artillery, enlisted on April 15, 1941 at Norton Virginia, and was discharged on December 5, 1945, at Fort Bragg, North Carolina, at the age of 19. He entered the service at age 14 according to his obituary by lying. By Santelli’s own account, “I was probably the youngest solider to ever serve during the complete World War II, from the beginning to the end” (see the accompanying book “Wise County, Virginia’s World War II Veterans,” page 711). Included military discharge records indicate that Santelli was awarded the American Defense Service, American Theater Campaign, Asiatic-Pacific Theater Campaign, Good Conduct, and WWII Victory Medals and Philippine Liberation ribbon. He guarded submarine prisoners and accused German spies, supervised construction crews, trained Army recruits throughout the United Sates and served in the Pacific Theater. Toward the last part of the war, he was shipped out to Luzon with Company “A” 1292nd Engineer Combat Battalion and became an acting lieutenant platoon commander after the loss of the original commander. An A Company 1292nd flag is included. His unit was one of the first to land on the home island of Japan and within days of arriving was “standing in the center of where the atomic bomb was dropped.” Comes with two U.S. Army dress jackets and one U.S. Army visor owned by Santelli, consignor research documenting Santelli’s military service, and related original documents.
Class: Class III
Fine with 70% plus of the blue finish remaining with the balance a dark brown patina with some areas of light wear mostly on the edges and high spots. The buttstock, carrying handle and pistol grip all show considerable pressure dents and dings obviously from actual field use by the Japanese. It has a matching serial numbered barrel and correct Showa date. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
This is a very fine example of an early production, fully operational WWII Japanese Type 99 LMG manufactured under the control of the Kokura Arsenal and documented to World War II veteran U.S. Army Staff Sergeant Jack C. Santelli. The Type 99 was developed in 1939 as a replacement for the Type 96 LMG and was used throughout the war by all Japanese forces on the Japanese held islands and mainland China. They are similar to the Type 96 but had a forward mounted folding bipod, a finned quick change barrel with a top mounted carrying handle and a fully adjustable mono-pod attached to the underside of the buttstock. These were very well-made machine guns that featured all machined parts and hardwood buttstocks and pistol grips. The right side of the receiver has the four intertwined cannon balls of the Kokura Arsenal over serial number (2961) followed by the 35th series arsenal mark followed by the Showa date of 18.1 (January 1943). It is fitted with a hardwood buttstock, pistol grip and carrying handle. The left side of the buttstock has one of the WWII Japanese helmet star emblems. It is complete with a late WWII Japanese Type 30 bayonet made under the control of the Kokura Arsenal featuring a blued blade and "Arrow/M" maker’s mark. Also included with this lot is a newly manufactured 30 round magazine, GI brass cleaning rod, spare (original) operating rod, and recoil spring guide. Accompanying this machine gun are the following documents: an original WWII capture paper listing an unidentified “rifle-Japanese” and “bayonet with scabbard” entitled to Staff Sergeant Jack C. Santelli, a 1987 dated Commonwealth of Virginia application for registration of machine gun indicating Jack C. Santelli as the owner of this weapon, a 1987 dated letter written by Sheriff W.F. Kelley to the ATF attesting “Mr. Santelli is the true owner of this firearm which is on temporary loan to the Southwest Virginia Museum located at Big Stone Gap, Virginia,” a 1954 dated contract of deposit stating Santelli deposited “1 Japanese Machine Gun” to the custody of the Southwest Virginia Museum, registration of this firearm by the Southwest Virginia Museum in compliance to the Gun Control Act of 1968, a 1987 dated ATF application for transfer and registration of firearm showing that this machine gun was transferred to Santelli from the Southwest Virginia Museum, and a 2017 dated ATF application for transfer and registration of firearm showing that this machine gun was transferred from Santelli’s daughter, Diana Santelli, to the executor of her estate following her death in 2016. U.S. Army Staff Sergeant Jack C. Santelli, Combat Engineers, Infantry, Artillery, enlisted on April 15, 1941 at Norton Virginia, and was discharged on December 5, 1945, at Fort Bragg, North Carolina, at the age of 19. He entered the service at age 14 according to his obituary by lying. By Santelli’s own account, “I was probably the youngest solider to ever serve during the complete World War II, from the beginning to the end” (see the accompanying book “Wise County, Virginia’s World War II Veterans,” page 711). Included military discharge records indicate that Santelli was awarded the American Defense Service, American Theater Campaign, Asiatic-Pacific Theater Campaign, Good Conduct, and WWII Victory Medals and Philippine Liberation ribbon. He guarded submarine prisoners and accused German spies, supervised construction crews, trained Army recruits throughout the United Sates and served in the Pacific Theater. Toward the last part of the war, he was shipped out to Luzon with Company “A” 1292nd Engineer Combat Battalion and became an acting lieutenant platoon commander after the loss of the original commander. An A Company 1292nd flag is included. His unit was one of the first to land on the home island of Japan and within days of arriving was “standing in the center of where the atomic bomb was dropped.” Comes with two U.S. Army dress jackets and one U.S. Army visor owned by Santelli, consignor research documenting Santelli’s military service, and related original documents.
Class: Class III
Fine with 70% plus of the blue finish remaining with the balance a dark brown patina with some areas of light wear mostly on the edges and high spots. The buttstock, carrying handle and pistol grip all show considerable pressure dents and dings obviously from actual field use by the Japanese. It has a matching serial numbered barrel and correct Showa date. NOTE: This item is restricted as a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) that is classified as a "Curios or Relic" as defined in 27 CFR, 478.11. These weapons are still subject to the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Live WWII Japanese Type 89 "Knee" Mortar, NFA DD
Lot # 1524 (Sale Order: 525 of 1003)
Make: Other - ManufacturerBarrel Length: 9 3/4 inch roundModel: Type 89 (Knee Mortar)Caliber: 50 mmStock Material: Other - Stock MaterialSerial #: 3453Condition: GoodLow Estimate: 2,250High Estimate: 3,500Other: metal
World War II Japanese Type 89 "Knee" Mortar, BATFE/NFA Destructive Device
Originally developed in 1928, the Type 89 Mortar was a mainstay of Imperial Japanese forces through World War II. Lightweight, compact, and easily transportable by a single operator, the Type 89 was nicknamed the "Knee Mortar" due to an unfortunate misunderstanding of the design of the baseplate. Intended for use with a downed tree or similar rugged material, the smooth curvature made it a good fit for a human thigh or knee; any American attempting to use their leg as a firing platform was destined for a painful lesson in Newtonian physics (specifically regarding equal and opposite reactions) and a trip to a field hospital. Designed to be fired at a fixed angle, range control is accomplished via a threaded bolt assembly that extends through the breech, effectively reducing the barrel length as needed. A levelling device attached to the rifled barrel ensures proper angle, and a double-action style firing mechanism is integrated into the bolt.
Class: Class III
Fine. 40% of the original blue finish is present, with a mixed brown patina and some mild pitting. The pull-strap for the firing device shows some light cracking, and the dust cover material is absent. Some of the small components are mixed numbered, but appear to be in good order. NOTE: This Destructive Device is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
Originally developed in 1928, the Type 89 Mortar was a mainstay of Imperial Japanese forces through World War II. Lightweight, compact, and easily transportable by a single operator, the Type 89 was nicknamed the "Knee Mortar" due to an unfortunate misunderstanding of the design of the baseplate. Intended for use with a downed tree or similar rugged material, the smooth curvature made it a good fit for a human thigh or knee; any American attempting to use their leg as a firing platform was destined for a painful lesson in Newtonian physics (specifically regarding equal and opposite reactions) and a trip to a field hospital. Designed to be fired at a fixed angle, range control is accomplished via a threaded bolt assembly that extends through the breech, effectively reducing the barrel length as needed. A levelling device attached to the rifled barrel ensures proper angle, and a double-action style firing mechanism is integrated into the bolt.
Class: Class III
Fine. 40% of the original blue finish is present, with a mixed brown patina and some mild pitting. The pull-strap for the firing device shows some light cracking, and the dust cover material is absent. Some of the small components are mixed numbered, but appear to be in good order. NOTE: This Destructive Device is a National Firearms Act (NFA), fully transferable Class 3, which is registered with the Bureau of Alcohol, Tobacco, Firearms and Explosives, (BATFE) under the provisions of 18 U.S.C. Chapter 44 and 27 CFR part 478.
