Premiere Firearms Auction - Day 2
Saturday, September 14, 2013 | 9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 2
Saturday, September 14, 2013 | 9:00 AM Central
Auction closed.
Internet Premium: 20.5%
See Special Terms for additional fees
Cash Payment Discount: 2.5%
See Special Terms for additional fees
Cash Payment Discount: 2.5%
Description
Day 2- 2700 Lots “Fresh, Historic, and Rare” is the potent combination of words Rock Island Auction Company President Patrick Hogan has used to describe the RIAC upcoming September Firearms Auction.
x Cancel
Exceptional Civil War Remington Contract Model 1863 Zouave Percussion Rifle
Lot # 1025 (Sale Order: 26 of 952)
Manufacturer: RemingtonBarrel Length: 33 inchModel: 1863Frame Mat.: blue/casehardenedSerial #: NSNStock Mat.: walnutCondition: Excellent plus. The rifle appears to be unissued aLow Est: 4000Caliber: 58 percussionHigh Est: 6000
Exceptional Civil War Remington Contract Model 1863 Zouave Percussion Rifle
Model 1863 Percussion Contract Rifle manufactured by the Remington Arms Co., in 1863. Referred to by collectors as the "Zouave" rifle; the Model 1863 Contract Rifle was an improved version of the U.S. Harpers Ferry Model 1855 Rifle. The Model 1863 Rifle was referred to in official documents as the "Harpers Ferry Pattern" rifle. The Model 1863 Rifle has the distinction of being the last percussion rifle adopted by the Ordnance Department and is generally considered to be the highest quality and best designed percussion military longarm. The barrel has a deep military blue finish. The hammer and lock are casehardened. The screws and band springs have a niter blue finish. The forend cap, barrel bands, trigger guard, patch box and buttplate are brass. The stock is oil finished black walnut. The rifle has a heavy round barrel with wide-base iron front sight and 1855 style rear sight with two folding blades. The right side of the barrel muzzle has a lug for a saber bayonet. The bright finished straight shank tulip head ramrod is secured by a spring in the stock. The brass patch box is similar to the style used on the Model 1855 rifle and contains a spare percussion nipple. The lock plate is dated "1863" behind the hammer and roll stamped with the Federal Eagle and Shield motif above "U.S.". "REMINGTON'S/ILLION N.Y" is roll stamped in two lines ahead of the hammer. The top of the barrel is stamped with the date "1863". The "Eagle-head/P/V" acceptance proof and inspection marks are stamped to the left of the date. The left barrel flat is stamped "STEEL" followed by the Ordnance sub-inspection stamp "R.K.A.". "U.S." is stamped on the heel of the buttplate. "U" is stamped on the right side of both barrel bands facing the muzzle. Single letter Ordnance sub-inspection marks are stamped on all of the brass furniture and the lock plate. The left stock flat is stamped with the Ordnance sub-inspection and final inspection marks. The upper mark consists of the script initials "HDJ" (Henry D. Jennings) in a rectangle and the lower mark has the initials "BH" (Benjamin Hannis) with a rectangular border. Most of the 12,501 Remington Model 1863 Contract Rifles apparently were not issued and remain in very fine-excellent condition. The rifle is fitted with a Spanish-American War era leather sling.
Condition: Excellent plus. The rifle appears to be unissued and unfired and shows only storage and handling wear. The barrel and rear sight retain at least 98% of the original military blue finish. 99% plus of the vivid casehardened finish is present on the lock plate and hammer. The brass furniture has an attractive mustard yellow patina. The stock is in excellent plus condition with a few minor storage marks. The ordnance inspection marks on the left flat are extremely sharp. This is an exceptional example of a the last percussion rifle adopted by the Ordnance Department.
Model 1863 Percussion Contract Rifle manufactured by the Remington Arms Co., in 1863. Referred to by collectors as the "Zouave" rifle; the Model 1863 Contract Rifle was an improved version of the U.S. Harpers Ferry Model 1855 Rifle. The Model 1863 Rifle was referred to in official documents as the "Harpers Ferry Pattern" rifle. The Model 1863 Rifle has the distinction of being the last percussion rifle adopted by the Ordnance Department and is generally considered to be the highest quality and best designed percussion military longarm. The barrel has a deep military blue finish. The hammer and lock are casehardened. The screws and band springs have a niter blue finish. The forend cap, barrel bands, trigger guard, patch box and buttplate are brass. The stock is oil finished black walnut. The rifle has a heavy round barrel with wide-base iron front sight and 1855 style rear sight with two folding blades. The right side of the barrel muzzle has a lug for a saber bayonet. The bright finished straight shank tulip head ramrod is secured by a spring in the stock. The brass patch box is similar to the style used on the Model 1855 rifle and contains a spare percussion nipple. The lock plate is dated "1863" behind the hammer and roll stamped with the Federal Eagle and Shield motif above "U.S.". "REMINGTON'S/ILLION N.Y" is roll stamped in two lines ahead of the hammer. The top of the barrel is stamped with the date "1863". The "Eagle-head/P/V" acceptance proof and inspection marks are stamped to the left of the date. The left barrel flat is stamped "STEEL" followed by the Ordnance sub-inspection stamp "R.K.A.". "U.S." is stamped on the heel of the buttplate. "U" is stamped on the right side of both barrel bands facing the muzzle. Single letter Ordnance sub-inspection marks are stamped on all of the brass furniture and the lock plate. The left stock flat is stamped with the Ordnance sub-inspection and final inspection marks. The upper mark consists of the script initials "HDJ" (Henry D. Jennings) in a rectangle and the lower mark has the initials "BH" (Benjamin Hannis) with a rectangular border. Most of the 12,501 Remington Model 1863 Contract Rifles apparently were not issued and remain in very fine-excellent condition. The rifle is fitted with a Spanish-American War era leather sling.
Condition: Excellent plus. The rifle appears to be unissued and unfired and shows only storage and handling wear. The barrel and rear sight retain at least 98% of the original military blue finish. 99% plus of the vivid casehardened finish is present on the lock plate and hammer. The brass furniture has an attractive mustard yellow patina. The stock is in excellent plus condition with a few minor storage marks. The ordnance inspection marks on the left flat are extremely sharp. This is an exceptional example of a the last percussion rifle adopted by the Ordnance Department.
Rare Civil War Merrill Breech Loading Percussion Rifle
Lot # 1026 (Sale Order: 27 of 952)
Manufacturer: MerrillBarrel Length: 33 inch roundModel: BreechloadFrame Mat.: brownSerial #: 8515Stock Mat.: walnutCondition: Very good plus. The rifle is all original and showLow Est: 6500Caliber: 54 percussionHigh Est: 9000
Rare Civil War Merrill Breech Loading Percussion Rifle
Manufactured by James H. Merrill of Baltimore, Maryland, circa 1862. The Ordnance Department purchased 770 Merrill rifles which were issued to the 21st Indiana Volunteer Infantry and individual sharpshooters. Only about 800 Merrill rifles were manufactured between 1862 and 1865; surviving examples are rare. This rifle has a bright finished barrel with large half-moon shaped iron front sight, lug for a sword bayonet on the right side and two leaf folding rear sight that serves as a latch for the breech lever. The receiver, operating lever, bevel edged lock plate, hammer and bolster are casehardened. The forearm cap, barrel bands, side plate, trigger guard, patch box and buttplate are brass. The iron ramrod has a flared tip. The stock is oil finished black walnut. The rifle serial number is stamped vertically on the lock plate behind the hammer. "J.H. MERRILL BALTO/PAT. JULY 1858/APL. 9 MAY 21-28-61" is stamped in three lines on the lock plate ahead of the hammer. The top of the operating lever is roll stamped "J.H. MERRILL BALTO./PAT. JUL. 1858" in two lines. A Ordnance final inspection stamp which consists of the script initials "ZB" (Zadock Butt) with an oval border is stamped on the left stock flat. A block "F" is stamped on the right side of the stock ahead of the patch box. Although manufactured in limited numbers, Merrill breech loading rifles saw action during the siege of Port Hudson, Louisiana, in 1863 and were considered to be accurate and effective weapons.
Condition: Very good plus. The rifle is all original and shows moderate service wear. The bright finished barrel has aged to a smooth plum-brown patina. The exposed areas of the hammer, breechblock and lock plate have a mottled brown patina. The protected areas of the breechblock and receiver retain substantial amounts of the casehardened finish. The brass furniture has never been polished and has a dark untouched patina. The buttplate has moderate handling wear. The markings on the lock plate and operating lever are sharp. The Ordnance final inspection mark on the left stock flat is crisp and completely legible. The stock is very good and shows a professionally repaired wrist with moderate service wear with scattered minor scratches and handling marks. This is a rare example of a rare Civil War breech loading rifle that would be a great addition to any collection of Civil War firearms.
Manufactured by James H. Merrill of Baltimore, Maryland, circa 1862. The Ordnance Department purchased 770 Merrill rifles which were issued to the 21st Indiana Volunteer Infantry and individual sharpshooters. Only about 800 Merrill rifles were manufactured between 1862 and 1865; surviving examples are rare. This rifle has a bright finished barrel with large half-moon shaped iron front sight, lug for a sword bayonet on the right side and two leaf folding rear sight that serves as a latch for the breech lever. The receiver, operating lever, bevel edged lock plate, hammer and bolster are casehardened. The forearm cap, barrel bands, side plate, trigger guard, patch box and buttplate are brass. The iron ramrod has a flared tip. The stock is oil finished black walnut. The rifle serial number is stamped vertically on the lock plate behind the hammer. "J.H. MERRILL BALTO/PAT. JULY 1858/APL. 9 MAY 21-28-61" is stamped in three lines on the lock plate ahead of the hammer. The top of the operating lever is roll stamped "J.H. MERRILL BALTO./PAT. JUL. 1858" in two lines. A Ordnance final inspection stamp which consists of the script initials "ZB" (Zadock Butt) with an oval border is stamped on the left stock flat. A block "F" is stamped on the right side of the stock ahead of the patch box. Although manufactured in limited numbers, Merrill breech loading rifles saw action during the siege of Port Hudson, Louisiana, in 1863 and were considered to be accurate and effective weapons.
Condition: Very good plus. The rifle is all original and shows moderate service wear. The bright finished barrel has aged to a smooth plum-brown patina. The exposed areas of the hammer, breechblock and lock plate have a mottled brown patina. The protected areas of the breechblock and receiver retain substantial amounts of the casehardened finish. The brass furniture has never been polished and has a dark untouched patina. The buttplate has moderate handling wear. The markings on the lock plate and operating lever are sharp. The Ordnance final inspection mark on the left stock flat is crisp and completely legible. The stock is very good and shows a professionally repaired wrist with moderate service wear with scattered minor scratches and handling marks. This is a rare example of a rare Civil War breech loading rifle that would be a great addition to any collection of Civil War firearms.
Ball & Williams Ballard Patent Single Shot Military Pattern Rifle
Lot # 1027 (Sale Order: 28 of 952)
Manufacturer: Ball & WilliamsBarrel Length: 30 inch roundModel: Ballard SportingFrame Mat.: brownSerial #: 12138Stock Mat.: walnutCondition: Good, showing a textured dark brown patina overallLow Est: 1600Caliber: 46High Est: 2500
Ball & Williams Ballard Patent Single Shot Military Pattern Rifle
Blade front and two-leaf rear sights with the Ballard's patent markings on the right side of the receiver, and the Ball & Williams address and Merwin & Hulbert agent markings on the reverse. Matching numbers are present on the barrel and frame with matching partial numbers on the breechblock and extractor. Smooth stock with three barrel bands, sling swivels and a smooth buttplate. Though no state markings are present, this rifle falls with the serial number range and has the proper configuration for Ballard full stock rifles ordered by the State of Kentucky during the Civil War, delivered from July 1864 to March 1865.
Condition: Good, showing a textured dark brown patina overall, scattered pitting and mild handling marks. The stock is good as period refinished, with some chipping around the extractor, edges and barrel bands, dents and scratches. Mechanically good.
Blade front and two-leaf rear sights with the Ballard's patent markings on the right side of the receiver, and the Ball & Williams address and Merwin & Hulbert agent markings on the reverse. Matching numbers are present on the barrel and frame with matching partial numbers on the breechblock and extractor. Smooth stock with three barrel bands, sling swivels and a smooth buttplate. Though no state markings are present, this rifle falls with the serial number range and has the proper configuration for Ballard full stock rifles ordered by the State of Kentucky during the Civil War, delivered from July 1864 to March 1865.
Condition: Good, showing a textured dark brown patina overall, scattered pitting and mild handling marks. The stock is good as period refinished, with some chipping around the extractor, edges and barrel bands, dents and scratches. Mechanically good.
Unique Factory Cased Silver Plated Sharps New Model of 1859 Breech-Loading Carbine
Lot # 1028 (Sale Order: 29 of 952)
Manufacturer: Sharps Rifle Manufacturing CompanyBarrel Length: 22 inch roundModel: New Model 1859Frame Mat.: silver-platedSerial #: 68930Stock Mat.: varnished walnutCondition: Very fine. The carbine retains 75% of the silver pLow Est: 18000Caliber: 52 percussionHigh Est: 27500
Unique Factory Cased Silver Plated Sharps New Model of 1859 Breech-Loading Carbine
This is unique example of a civilian Sharps New Model of 1859 Carbine manufactured circa 1861. The carbine has a silver plated finish on all components and a varnished straight grain walnut stock and forearm. There are no military inspection or sub-inspection marks on the carbine. The carbine retains the military sling bar and ring and has a complete Lawrence pellet primer. The barrel has a Lawrence patent short leaf folding rear sight with 800 yard center notch. The barrel, rear sight, receiver, and lock plate have the standard Sharps and Lawrence patent markings. The serial number "68930" is stamped on the upper receiver tang. The initials "R.K." are boldly engraved in Old English letters on the top of the barrel over the factory "NEW MODEL 1859" markings. The carbine is equipped with a factory walnut partition case. The case interior has seven compartments and is lined with red baize. The case contain the following: double cavity iron bullet mold marked "NEW MODEL 1866/52" on one leg, adjustable charger powder flask with gold plated top and brown lacquer body embossed with a relief oval hunting scene featuring a hunter, dog and deer, empty original packet of ten 52/100 Sharps cartridges, two original .52 caliber linen cartridges, spare percussion nipple, several lead bullets, several percussion caps and key. None of the accessories are original to the casing. Introduced in 1859, the Sharps New Model 1859 was available as a carbine, military rifle and sporting rifle. The New Model 1859 and its successor the New Model 1863 were quality .52 caliber carbines that were popular among Union Civil War troops. Even the Confederacy manufactured copies of the Sharps carbine in Richmond, Virginia. In actuality Sharps New Model 1859 and New Model 1863 carbines were all one model with the difference in designation being merely a difference in barrel markings, a cleanout screw and minor sight change. 3,000 New Model carbines were manufactured with brass furniture and another 30,000 were manufactured with iron furniture. Silver plated factory examples remained undocumented in SHARPS FIREARMS by noted Sharps expert Frank Sellers, and civilian Sharps New Model carbines are rare given that fact that factory production was devoted to the war effort.
Condition: Very fine. The carbine retains 75% of the silver plated finish. Most of the plating on the barrel is intact. The plating on the receiver, hammer, lever has heavy flaking and the underlying metal is dark and has considerable pitting. There is moderate-heavy flash pitting on the top of the breech block and the percussion nipple. The stock and forearm retain most of the varnish finish and are very good. The action functions well. The engraved monogram on the top of the barrel is crisp. The case exterior is fine overall with minor scratches and handling marks and one hairline crack. The interior is good overall. The fine original red baize lining is faded but clean. There are several discolored spots and compression marks in the lid lining from contact with the carbine. The lining on the partitions nearest the hammer and front sight is torn. The powder flask is excellent and retains about 90% of the gold plated and brown lacquer finish. The cartridge packet is good. The bullet mold has a light covering of surface rust and the two linen cartridge are good. This is a unique silver plated inscribed civilian Sharps New Model 1859 carbine with factory partition case creates a one-of-a-kind piece. No similar examples are illustrated in "SHARPS FIREARMS" by Frank Sellers.
This is unique example of a civilian Sharps New Model of 1859 Carbine manufactured circa 1861. The carbine has a silver plated finish on all components and a varnished straight grain walnut stock and forearm. There are no military inspection or sub-inspection marks on the carbine. The carbine retains the military sling bar and ring and has a complete Lawrence pellet primer. The barrel has a Lawrence patent short leaf folding rear sight with 800 yard center notch. The barrel, rear sight, receiver, and lock plate have the standard Sharps and Lawrence patent markings. The serial number "68930" is stamped on the upper receiver tang. The initials "R.K." are boldly engraved in Old English letters on the top of the barrel over the factory "NEW MODEL 1859" markings. The carbine is equipped with a factory walnut partition case. The case interior has seven compartments and is lined with red baize. The case contain the following: double cavity iron bullet mold marked "NEW MODEL 1866/52" on one leg, adjustable charger powder flask with gold plated top and brown lacquer body embossed with a relief oval hunting scene featuring a hunter, dog and deer, empty original packet of ten 52/100 Sharps cartridges, two original .52 caliber linen cartridges, spare percussion nipple, several lead bullets, several percussion caps and key. None of the accessories are original to the casing. Introduced in 1859, the Sharps New Model 1859 was available as a carbine, military rifle and sporting rifle. The New Model 1859 and its successor the New Model 1863 were quality .52 caliber carbines that were popular among Union Civil War troops. Even the Confederacy manufactured copies of the Sharps carbine in Richmond, Virginia. In actuality Sharps New Model 1859 and New Model 1863 carbines were all one model with the difference in designation being merely a difference in barrel markings, a cleanout screw and minor sight change. 3,000 New Model carbines were manufactured with brass furniture and another 30,000 were manufactured with iron furniture. Silver plated factory examples remained undocumented in SHARPS FIREARMS by noted Sharps expert Frank Sellers, and civilian Sharps New Model carbines are rare given that fact that factory production was devoted to the war effort.
Condition: Very fine. The carbine retains 75% of the silver plated finish. Most of the plating on the barrel is intact. The plating on the receiver, hammer, lever has heavy flaking and the underlying metal is dark and has considerable pitting. There is moderate-heavy flash pitting on the top of the breech block and the percussion nipple. The stock and forearm retain most of the varnish finish and are very good. The action functions well. The engraved monogram on the top of the barrel is crisp. The case exterior is fine overall with minor scratches and handling marks and one hairline crack. The interior is good overall. The fine original red baize lining is faded but clean. There are several discolored spots and compression marks in the lid lining from contact with the carbine. The lining on the partitions nearest the hammer and front sight is torn. The powder flask is excellent and retains about 90% of the gold plated and brown lacquer finish. The cartridge packet is good. The bullet mold has a light covering of surface rust and the two linen cartridge are good. This is a unique silver plated inscribed civilian Sharps New Model 1859 carbine with factory partition case creates a one-of-a-kind piece. No similar examples are illustrated in "SHARPS FIREARMS" by Frank Sellers.
Rare Confederate Fayetteville Armory Percussion Rifle
Lot # 1029 (Sale Order: 30 of 952)
Manufacturer: Fayetteville Armory Pistols And RiflesBarrel Length: 33 inch roundModel: Percussion RifleFrame Mat.: brownSerial #: NSNStock Mat.: walnutCondition: Good. The rifle appears to be mostly original. TheLow Est: 13000Caliber: 58 percussionHigh Est: 19000
Rare Confederate Fayetteville Armory Percussion Rifle
Rare example of a Confederate Model 1855 pattern rifle manufactured at the former federal armory at Fayetteville, North Carolina, c.1864. The Fayetteville Rifles were manufactured using machinery captured from the U.S. Arsenal at Harpers Ferry and were a simplified version of the U.S. Model 1855 Rifle. This late production 'Type IV' rifle has the characteristic low profile lock plate with brass buttplate, trigger guard, barrel bands and forearm cap. The rifle has the standard, three-leaf, Model 1855 pattern, rear sight and straight-shank iron ramrod with tulip head. The lock plate is dated "1864" behind the hammer and roll-stamped in front of the hammer with the Federal eagle and shield motif above "C.S.A." followed by "FAYETTEVILLE". The top of the barrel is dated "1864" parallel to the bore and the left side of the barrel is stamped with "V/P/Eagle head" proof and inspection marks. The buttplate tang is stamped "CSA" ahead on the top screw. The right side of the upper and lower barrel bands are stamped with the standard "U" marking. The black walnut stock has an inspection mark that consists of the script initials "JB" with an oval border stamped on the left flat. The Fayetteville Rifle was a high quality weapon that was manufactured in quantity. Nearly 5000 Type IV rifles were manufactured by the Fayetteville Armory in 1864.
Condition: Good. The rifle appears to be mostly original. The condition is typical of Confederate made weapons which inevitably were issued and show the effects of hard service. The bright finished barrel has a dark patina above the stock line. The barrel has scattered age discoloration with moderate-heavy flash pitting surrounding the nipple bolster. The barrel date and inspection marks remain clear. The lock plate has a silver-gray patina and the hammer and bolster are dark. The lock plate, hammer and bolster all show the flash pitting typical of a rifle that saw service. The date, Federal eagle and armory markings are clear. The bolster clean-out screw is a replacement. The brass forearm cap, barrel bands and buttplate are in good condition with an un-touched patina. The stock is in fair condition with moderate handling wear and a deep crack on the left flat between the lock screws. The inspection mark on the left flat has been improved by hand carving. This is a solid example of one of the best designed, best made and most widely issued Confederate made long arms. This important rifle would be a stand-out piece in any collection of Civil War firearms or military.
Rare example of a Confederate Model 1855 pattern rifle manufactured at the former federal armory at Fayetteville, North Carolina, c.1864. The Fayetteville Rifles were manufactured using machinery captured from the U.S. Arsenal at Harpers Ferry and were a simplified version of the U.S. Model 1855 Rifle. This late production 'Type IV' rifle has the characteristic low profile lock plate with brass buttplate, trigger guard, barrel bands and forearm cap. The rifle has the standard, three-leaf, Model 1855 pattern, rear sight and straight-shank iron ramrod with tulip head. The lock plate is dated "1864" behind the hammer and roll-stamped in front of the hammer with the Federal eagle and shield motif above "C.S.A." followed by "FAYETTEVILLE". The top of the barrel is dated "1864" parallel to the bore and the left side of the barrel is stamped with "V/P/Eagle head" proof and inspection marks. The buttplate tang is stamped "CSA" ahead on the top screw. The right side of the upper and lower barrel bands are stamped with the standard "U" marking. The black walnut stock has an inspection mark that consists of the script initials "JB" with an oval border stamped on the left flat. The Fayetteville Rifle was a high quality weapon that was manufactured in quantity. Nearly 5000 Type IV rifles were manufactured by the Fayetteville Armory in 1864.
Condition: Good. The rifle appears to be mostly original. The condition is typical of Confederate made weapons which inevitably were issued and show the effects of hard service. The bright finished barrel has a dark patina above the stock line. The barrel has scattered age discoloration with moderate-heavy flash pitting surrounding the nipple bolster. The barrel date and inspection marks remain clear. The lock plate has a silver-gray patina and the hammer and bolster are dark. The lock plate, hammer and bolster all show the flash pitting typical of a rifle that saw service. The date, Federal eagle and armory markings are clear. The bolster clean-out screw is a replacement. The brass forearm cap, barrel bands and buttplate are in good condition with an un-touched patina. The stock is in fair condition with moderate handling wear and a deep crack on the left flat between the lock screws. The inspection mark on the left flat has been improved by hand carving. This is a solid example of one of the best designed, best made and most widely issued Confederate made long arms. This important rifle would be a stand-out piece in any collection of Civil War firearms or military.
Very Rare Civil War Confederate Officer's Saber Belt and Eagle Head Spurs with Mullinax Authenticati
Lot # 1030 (Sale Order: 31 of 952)
Manufacturer: NoneLow Est: 5500Model: NoneHigh Est: 8500Condition: Fine. The light weight folded weather shows typica
Very Rare Civil War Confederate Officer's Saber Belt and Eagle Head Spurs with Mullinax Authentication Letter
Saber belt and spurs attributed to Confederate Colonel E. J. Harvie. The group consists of a black, folded leather saber belt with three-piece brass belt buckle bearing the Virginia State Seal and a pair of cast brass eagle head spurs with twelve-pointed iron rowels. The group is accompanied by a Letter of Authenticity by Steve Mullinax, author of "CONFEDERATE BELT BUCKLES AND PLATES" dated 1998. the letter states that the author believes the belt set is authentic and was "used in the Confederacy during the American Civil War". Also included with the group is a photocopy of a typed and notarized letter that states the belt was originally property of Colonel Edwin James Harvie, C.S.A. of Chula, Virginia. The belt is constructed of folded black leather and has two sliding leather keepers and two sliding leather loops for saber/sword slings. A leather tongue stitched to the inside of the belt to protect the uniform from contact with the buckle. The light-medium weight belt is a typical pre-war or early Civil War pattern officer's saber belt. The three piece brass belt plate is typical of the type used by Virginia militia officers ca. 1850-1890. The plate displays the Great Seal of Virginia which depicts Virtue with an upraised sword and spear over the vanquished Tyranny surrounded by the motto "SIC SEMPER TYRANNIS/VIRGINIA". The outer portion of the buckle and the edges of both keepers is decorated with cast oak leaves. The buckle and keeper are not bench-marked. The belt is complete with two delicate, gold-plated, brass saber hangers with snap hooks. The relatively lightweight construction of the belt and light-weight, full-dress saber hangers probably means this belt was probably intended for wear with a dress uniform and was not a service belt. The fact that the belt has a Virginia state seal buckle when documents that accompany the belt indicate Colonel Harvie served in the Army of Tennessee may indicate that this belt is a pre-Civil War militia officer's belt. The three piece brass spurs have well detailed cast eagle heads and are complete with the original black leather straps. The flashy eagle head design is also typical of spurs that were popular during the Mexican War and the period before the Civil War. This is a rare officers saber belt with Virginia state seal and high quality officer's spurs attributed to a Civil War Confederate Colonel.
Condition: Fine. The light weight folded weather shows typical wear with one small tear in the upper edge of the belt, some loose stitching on the inside and scattered flaking on the edges of the belt and keepers. The light-weight Civil War officers saber belts were delicate and are hard to find in the complete condition. The belt buckle has an attractive patina and is in very good condition with moderate handling wear. The saber hangers are in excellent condition and retain most of the gold plated finish. The spurs are in very good condition with a nice, untouched patina; the straps are original to the spurs and are in good condition. This is a very good example of a rare, identified, Civil War Confederate officer's group.
Saber belt and spurs attributed to Confederate Colonel E. J. Harvie. The group consists of a black, folded leather saber belt with three-piece brass belt buckle bearing the Virginia State Seal and a pair of cast brass eagle head spurs with twelve-pointed iron rowels. The group is accompanied by a Letter of Authenticity by Steve Mullinax, author of "CONFEDERATE BELT BUCKLES AND PLATES" dated 1998. the letter states that the author believes the belt set is authentic and was "used in the Confederacy during the American Civil War". Also included with the group is a photocopy of a typed and notarized letter that states the belt was originally property of Colonel Edwin James Harvie, C.S.A. of Chula, Virginia. The belt is constructed of folded black leather and has two sliding leather keepers and two sliding leather loops for saber/sword slings. A leather tongue stitched to the inside of the belt to protect the uniform from contact with the buckle. The light-medium weight belt is a typical pre-war or early Civil War pattern officer's saber belt. The three piece brass belt plate is typical of the type used by Virginia militia officers ca. 1850-1890. The plate displays the Great Seal of Virginia which depicts Virtue with an upraised sword and spear over the vanquished Tyranny surrounded by the motto "SIC SEMPER TYRANNIS/VIRGINIA". The outer portion of the buckle and the edges of both keepers is decorated with cast oak leaves. The buckle and keeper are not bench-marked. The belt is complete with two delicate, gold-plated, brass saber hangers with snap hooks. The relatively lightweight construction of the belt and light-weight, full-dress saber hangers probably means this belt was probably intended for wear with a dress uniform and was not a service belt. The fact that the belt has a Virginia state seal buckle when documents that accompany the belt indicate Colonel Harvie served in the Army of Tennessee may indicate that this belt is a pre-Civil War militia officer's belt. The three piece brass spurs have well detailed cast eagle heads and are complete with the original black leather straps. The flashy eagle head design is also typical of spurs that were popular during the Mexican War and the period before the Civil War. This is a rare officers saber belt with Virginia state seal and high quality officer's spurs attributed to a Civil War Confederate Colonel.
Condition: Fine. The light weight folded weather shows typical wear with one small tear in the upper edge of the belt, some loose stitching on the inside and scattered flaking on the edges of the belt and keepers. The light-weight Civil War officers saber belts were delicate and are hard to find in the complete condition. The belt buckle has an attractive patina and is in very good condition with moderate handling wear. The saber hangers are in excellent condition and retain most of the gold plated finish. The spurs are in very good condition with a nice, untouched patina; the straps are original to the spurs and are in good condition. This is a very good example of a rare, identified, Civil War Confederate officer's group.
U.S. Civil War Maynard Second Model Breech Loading Percussion Carbine
Lot # 1031 (Sale Order: 32 of 952)
Manufacturer: Massachusetts Arms CoBarrel Length: 20 inch part octagonModel: Maynard-2nd CarbineFrame Mat.: blue/casehardenedSerial #: 23551Stock Mat.: walnutCondition: Very good with a mixed brown and gray patina overaLow Est: 1100Caliber: 50High Est: 1600
U.S. Civil War Maynard Second Model Breech Loading Percussion Carbine
Manufactured circa 1863-1865, and known to have been issued to the 9th & 11th Indiana and 11th Tennessee cavalry regiments. Blade front and 3-leaf rear sights with "N" on the rear sight base, "S" on the chamber, saddle ring bar and buttplate, "MANUFACTURED BY/MASS. ARMS CO./CHICOPEE FALLS." on the right side of the receiver and "EDWARD MAYNARD/PATENTEE/MAY 27. 1851./DEC. 6. 1859." on the reverse. The lower tang is dated "1865". Smooth straight wrist stock with "GWP" and "JM" cartouches on the left side of the wrist.
Condition: Very good with a mixed brown and gray patina overall. Showing mild spotting and handling marks. Bright edge wear is visible on the barrel, and traces of vivid case colors are present on the frame. The stock is fine with crisp cartouches, raised grain, some dents and scuffing. Mechanically fine.
Manufactured circa 1863-1865, and known to have been issued to the 9th & 11th Indiana and 11th Tennessee cavalry regiments. Blade front and 3-leaf rear sights with "N" on the rear sight base, "S" on the chamber, saddle ring bar and buttplate, "MANUFACTURED BY/MASS. ARMS CO./CHICOPEE FALLS." on the right side of the receiver and "EDWARD MAYNARD/PATENTEE/MAY 27. 1851./DEC. 6. 1859." on the reverse. The lower tang is dated "1865". Smooth straight wrist stock with "GWP" and "JM" cartouches on the left side of the wrist.
Condition: Very good with a mixed brown and gray patina overall. Showing mild spotting and handling marks. Bright edge wear is visible on the barrel, and traces of vivid case colors are present on the frame. The stock is fine with crisp cartouches, raised grain, some dents and scuffing. Mechanically fine.
U.S. Poultney & Trimble Smith's Patent Breech Loading Civil War Carbine
Lot # 1032 (Sale Order: 33 of 952)
Manufacturer: Poultney & TrimbleBarrel Length: 21 1/2 inch part octagonModel: SmithFrame Mat.: blue/casehardenedSerial #: 11787Stock Mat.: walnutCondition: Very fine with 85% of the original blue finish, shLow Est: 1800Caliber: 50High Est: 2750
U.S. Poultney & Trimble Smith's Patent Breech Loading Civil War Carbine
Blade front and ladder rear sights with "L.F.R." stamped on the left barrel flat. Casehardened receiver with barrel release latch inside the trigger guard, "MANUFACTURED BY/AM'N.M'CH'N.WKS./SPRINGFIELD.MASS", "ADDRESS/POULTNEY & TRIMBLE./BALTIMORE. U.S.A.", and "SMITH'S PATENT/JUNE 23. 1857" on the left side near the saddle ring bar. Smooth forearm and straight grip walnut stock with an oval "JH" cartouche on the left side of the wrist and a steel buttplate.
Condition: Very fine with 85% of the original blue finish, showing areas of brown patina, a mixed brown and grey on the barrel band, and scattered handling marks. Bright case colors are visible on the frame with areas of mixed brown and silver patina, particularly along the edges. Stock is also very fine with some dents, particularly on the forearm, mild chipping around the buttplate, and some handling marks. Mechanically excellent.
Blade front and ladder rear sights with "L.F.R." stamped on the left barrel flat. Casehardened receiver with barrel release latch inside the trigger guard, "MANUFACTURED BY/AM'N.M'CH'N.WKS./SPRINGFIELD.MASS", "ADDRESS/POULTNEY & TRIMBLE./BALTIMORE. U.S.A.", and "SMITH'S PATENT/JUNE 23. 1857" on the left side near the saddle ring bar. Smooth forearm and straight grip walnut stock with an oval "JH" cartouche on the left side of the wrist and a steel buttplate.
Condition: Very fine with 85% of the original blue finish, showing areas of brown patina, a mixed brown and grey on the barrel band, and scattered handling marks. Bright case colors are visible on the frame with areas of mixed brown and silver patina, particularly along the edges. Stock is also very fine with some dents, particularly on the forearm, mild chipping around the buttplate, and some handling marks. Mechanically excellent.
Sharps New Model 1863 Cartridge Conversion Carbine
Lot # 1033 (Sale Order: 34 of 952)
Manufacturer: Sharps Rifle Manufacturing CompanyBarrel Length: 22 inch roundModel: NM 1863 ConversionFrame Mat.: blue/casehardenedSerial #: C10494Stock Mat.: walnutCondition: Fine as arsenal refurbished at the time of conversLow Est: 1400Caliber: 50-70High Est: 2250
Sharps New Model 1863 Cartridge Conversion Carbine
Following the Civil War the U.S. Government decided to convert many percussion military arms to metallic cartridge. These carbines were completely refurbished by Sharps during the conversion process and if needed the stocks were replaced with ones not having a patch box, which is the case with this example. This carbine is chambered for the 50-70 round with the 3 groove barrel. The top of the barrel is marked "NEW MODEL 1863" at the breech (faint). The left side barrel flat is marked with the a very faint "W". Lawrence patent rear sight and block front sight with brass blade. The lock is marked with the Sharps and Lawrence patent dates, the left side of the receiver has the Sharps patent date and the serial number is on the upper tang. Mounted with a smooth walnut forearm and straight grip stock with faint cartouche on the left wrist and absent of the "DFC" ribbon cartouche on the left side.
Condition: Fine as arsenal refurbished at the time of conversion with 60% blue finish on the barrel and showing spots where the finish has faded from a solvent or chemical. The lock, hammer and receiver retain much of the dark case colors with a smooth brown patina on the balance. The wood is very fine with a few scattered minor dents and dings. The lock and receiver markings are readable. The action is fine.
Following the Civil War the U.S. Government decided to convert many percussion military arms to metallic cartridge. These carbines were completely refurbished by Sharps during the conversion process and if needed the stocks were replaced with ones not having a patch box, which is the case with this example. This carbine is chambered for the 50-70 round with the 3 groove barrel. The top of the barrel is marked "NEW MODEL 1863" at the breech (faint). The left side barrel flat is marked with the a very faint "W". Lawrence patent rear sight and block front sight with brass blade. The lock is marked with the Sharps and Lawrence patent dates, the left side of the receiver has the Sharps patent date and the serial number is on the upper tang. Mounted with a smooth walnut forearm and straight grip stock with faint cartouche on the left wrist and absent of the "DFC" ribbon cartouche on the left side.
Condition: Fine as arsenal refurbished at the time of conversion with 60% blue finish on the barrel and showing spots where the finish has faded from a solvent or chemical. The lock, hammer and receiver retain much of the dark case colors with a smooth brown patina on the balance. The wood is very fine with a few scattered minor dents and dings. The lock and receiver markings are readable. The action is fine.
Civil War U.S. E.G. Lamson Production Palmer Patent Breech Loading Carbine
Lot # 1034 (Sale Order: 35 of 952)
Manufacturer: PalmerBarrel Length: 20 inch roundModel: Saddle RingFrame Mat.: blue/casehardenedSerial #: NSNStock Mat.: walnutCondition: Fine, showing a mixed brown patina overall. 30% ofLow Est: 1600Caliber: 50High Est: 2500
Civil War U.S. E.G. Lamson Production Palmer Patent Breech Loading Carbine
The Palmer carbine, manufactured by E.G. Lamson & Co., of Windsor, Vermont, is significant as the first metallic cartridge, bolt-action weapon accepted by the Ordnance Department for issue to the U.S. Army. The Ordnance Department purchased 1,001 Palmer carbines late in the Civil War. Blade front and two leaf folding rear sights, with "M.M" inspection stamp next to the sight and "Wm. PALMER/PATENT/DEC. 22, 1863" near the handle. Casehardened lock and hammer, the former marked "U.S./E.G. LAMSON. &CO./WINDSOR, VT" ahead of the lock and "1865" behind. Oil finished walnut stock, with one "U" marked barrel band, oval "MM" cartouche on the left side ahead of the sling ring, "CSP" on the comb and "P" on the hammer, trigger guard and the buttplate heel.
Condition: Fine, showing a mixed brown patina overall. 30% of original finish, mostly in the protected areas and scattered handling marks. 50% case colors are present on the lock and hammer with the trigger guard and buttplate showing chiefly a gray and brown patina. The stock is fine with sharp cartouche, mild dents and scratches. Mechanically excellent.
The Palmer carbine, manufactured by E.G. Lamson & Co., of Windsor, Vermont, is significant as the first metallic cartridge, bolt-action weapon accepted by the Ordnance Department for issue to the U.S. Army. The Ordnance Department purchased 1,001 Palmer carbines late in the Civil War. Blade front and two leaf folding rear sights, with "M.M" inspection stamp next to the sight and "Wm. PALMER/PATENT/DEC. 22, 1863" near the handle. Casehardened lock and hammer, the former marked "U.S./E.G. LAMSON. &CO./WINDSOR, VT" ahead of the lock and "1865" behind. Oil finished walnut stock, with one "U" marked barrel band, oval "MM" cartouche on the left side ahead of the sling ring, "CSP" on the comb and "P" on the hammer, trigger guard and the buttplate heel.
Condition: Fine, showing a mixed brown patina overall. 30% of original finish, mostly in the protected areas and scattered handling marks. 50% case colors are present on the lock and hammer with the trigger guard and buttplate showing chiefly a gray and brown patina. The stock is fine with sharp cartouche, mild dents and scratches. Mechanically excellent.
Civil War Sharps & Hankins Model 1862 Carbine
Lot # 1035 (Sale Order: 36 of 952)
Manufacturer: Sharps & HankinsBarrel Length: 23 1/2 inch roundModel: 1862 NavyFrame Mat.: blue/casehardenedSerial #: 12386Stock Mat.: walnutCondition: Very good. The barrel retains most of the leather Low Est: 1100Caliber: 52 RFHigh Est: 1600
Civil War Sharps & Hankins Model 1862 Carbine
Manufactured from 1862-65. The carbine has the unique leather barrel cover to protect the blue barrel from rust. The leather is secured by two screws at the breech. Note that the carbine has a 23 1/2 inch barrel. Standard Model 1862s have a 24 inch barrel. The barrel is numbered to the gun. The left side of the frame is marked with the three line Sharps patent date and the right side has the four line address. Smooth straight grip stock with sling swivel and brass buttplate.
Condition: Very good. The barrel retains most of the leather cover which has age cracking. The remaining metal surfaces have a smooth dark patina with traces of silvered out original case colors. The brass has an attractive patina. The repaired stock is very good with some scattered minor handling marks. Mechanically fine.
Manufactured from 1862-65. The carbine has the unique leather barrel cover to protect the blue barrel from rust. The leather is secured by two screws at the breech. Note that the carbine has a 23 1/2 inch barrel. Standard Model 1862s have a 24 inch barrel. The barrel is numbered to the gun. The left side of the frame is marked with the three line Sharps patent date and the right side has the four line address. Smooth straight grip stock with sling swivel and brass buttplate.
Condition: Very good. The barrel retains most of the leather cover which has age cracking. The remaining metal surfaces have a smooth dark patina with traces of silvered out original case colors. The brass has an attractive patina. The repaired stock is very good with some scattered minor handling marks. Mechanically fine.
Scarce Civil War Gallager Breech Loading Percussion Carbine
Lot # 1036 (Sale Order: 37 of 952)
Manufacturer: GallagerBarrel Length: 22 1/4 inch roundModel: Percussion-CarbineFrame Mat.: blue/casehardenedSerial #: 10829Stock Mat.: walnutCondition: Fair with a smooth mottled brown patina on the barLow Est: 950Caliber: 50 percussionHigh Est: 1600
Scarce Civil War Gallager Breech Loading Percussion Carbine
Manufactured by Richardson & Overman of Philadelphia with a total production of about 12,700 in the 50 caliber. This is a single shot, breech loading percussion carbine with a walnut straight grip stock, carbine buttplate and iron patch box. The rear of the lock is marked "GALLAGER'S PATENT/JULY 17TH 1860" and "MANUFACTD BY/RICHARDSON & OVERMAN/PHILADA" over the serial number directly behind the hammer. The front sight a fixed pinched blade and the rear two leaf folding. There is a saddle ring bar and ring mounted on the left stock wrist. There is a faint boxed cartouche behind the saddle ring bar and a crude "SAMUEL backward J" scratched into the left upper side. The Gallager carbine saw extensive service during the Civil War including cavalry units from Ohio, Tennessee and West Virginia.
Condition: Fair with a smooth mottled brown patina on the barrel, lever and barrel tang, and a darker patina on the hammer, lock and frame. The patch box and buttplate have a gray patina with some minor pitting. The stock is god with wood fill on the left edge where it meets the frame and a few minor dents and handling marks. The markings are clear. Mechanically fine.
Manufactured by Richardson & Overman of Philadelphia with a total production of about 12,700 in the 50 caliber. This is a single shot, breech loading percussion carbine with a walnut straight grip stock, carbine buttplate and iron patch box. The rear of the lock is marked "GALLAGER'S PATENT/JULY 17TH 1860" and "MANUFACTD BY/RICHARDSON & OVERMAN/PHILADA" over the serial number directly behind the hammer. The front sight a fixed pinched blade and the rear two leaf folding. There is a saddle ring bar and ring mounted on the left stock wrist. There is a faint boxed cartouche behind the saddle ring bar and a crude "SAMUEL backward J" scratched into the left upper side. The Gallager carbine saw extensive service during the Civil War including cavalry units from Ohio, Tennessee and West Virginia.
Condition: Fair with a smooth mottled brown patina on the barrel, lever and barrel tang, and a darker patina on the hammer, lock and frame. The patch box and buttplate have a gray patina with some minor pitting. The stock is god with wood fill on the left edge where it meets the frame and a few minor dents and handling marks. The markings are clear. Mechanically fine.
Remington New Model Navy Metallic Conversion Revolver
Lot # 1037 (Sale Order: 38 of 952)
Manufacturer: Remington Arms IncBarrel Length: 7 3/8 inch octagonModel: New ModelFrame Mat.: nickelSerial #: 495Low Est: 2500Condition: Extremely Fine. The revolver retains 90% plus origHigh Est: 3750Caliber: 38 RFOther: walnut
Remington New Model Navy Metallic Conversion Revolver
Manufactured at the factory from 1873 to 1888, this New Model Navy rimfire cartridge revolver features a loading gate and an ejector rod on the right side. Many of these types of revolvers were not conversions, but actually left the factory as cartridge revolvers. The top barrel flat is stamped with the two line patent date/address over "NEW MODEL." The number "495" is stamped on the barrel, grip strap under the left grip panel and both grip panels and the numbers "40826" on the grip strap under the left grip panel and "0826" on the barrel. Fitted with smooth varnished grips.
Condition: Extremely Fine. The revolver retains 90% plus original nickel finish with a patch of minor pitting (left frame side). 60% muted original case colors remain on the hammer. The grips are very fine with most of the original varnish, a repaired chip (left panel), a missing small chip near the frame (left panel) and a few minor handling marks overall. Mechanically excellent.
Manufactured at the factory from 1873 to 1888, this New Model Navy rimfire cartridge revolver features a loading gate and an ejector rod on the right side. Many of these types of revolvers were not conversions, but actually left the factory as cartridge revolvers. The top barrel flat is stamped with the two line patent date/address over "NEW MODEL." The number "495" is stamped on the barrel, grip strap under the left grip panel and both grip panels and the numbers "40826" on the grip strap under the left grip panel and "0826" on the barrel. Fitted with smooth varnished grips.
Condition: Extremely Fine. The revolver retains 90% plus original nickel finish with a patch of minor pitting (left frame side). 60% muted original case colors remain on the hammer. The grips are very fine with most of the original varnish, a repaired chip (left panel), a missing small chip near the frame (left panel) and a few minor handling marks overall. Mechanically excellent.
Civil War U.S. Martially Inspected Remington New Model Army Percussion Revolver
Lot # 1038 (Sale Order: 39 of 952)
Manufacturer: Remington Arms IncBarrel Length: 8 inch octagonModel: New Model Army RevolverFrame Mat.: blueSerial #: 73038Low Est: 1300Condition: Fine. The revolver retains 75% original blue finisHigh Est: 1900Caliber: 44 percussionOther: walnut
Civil War U.S. Martially Inspected Remington New Model Army Percussion Revolver
Manufactured from 1863 to 1875. The top barrel flat is stamped with the 1858 patent date over the New York address over "NEW MODEL." Most of the major components are stamped with single letter sub-inspector marks including "L," "R," and "W." The barrel is numbered to the gun. The revolver is fitted with smooth grips featuring a clear script cartouche on the left panel and "L" sub-inspector mark on the bottom of both panels.
Condition: Fine. The revolver retains 75% original blue finish on the barrel and cylinder with a smooth gray patina on the frame. The grips are fine showing some pressure dents and chipping on the left panel and a few minor handling marks overall with a clear cartouche. Mechanically fine.
Manufactured from 1863 to 1875. The top barrel flat is stamped with the 1858 patent date over the New York address over "NEW MODEL." Most of the major components are stamped with single letter sub-inspector marks including "L," "R," and "W." The barrel is numbered to the gun. The revolver is fitted with smooth grips featuring a clear script cartouche on the left panel and "L" sub-inspector mark on the bottom of both panels.
Condition: Fine. The revolver retains 75% original blue finish on the barrel and cylinder with a smooth gray patina on the frame. The grips are fine showing some pressure dents and chipping on the left panel and a few minor handling marks overall with a clear cartouche. Mechanically fine.
U.S. Civil War Contract Rogers & Spencer Army Model Percussion Revolver
Lot # 1039 (Sale Order: 40 of 952)
Manufacturer: Rogers & SpencerBarrel Length: 7 1/2 inch octagonModel: PercussionFrame Mat.: blueSerial #: 3158Low Est: 1300Condition: Fine. The revolver retains 40% original blue finisHigh Est: 1800Caliber: 44 percussionOther: walnut
U.S. Civil War Contract Rogers & Spencer Army Model Percussion Revolver
This is one of an estimated 5,000 Army Model revolvers manufactured by Rogers & Spencer Co. for a U.S. contract issued in November 1864. Silver cone front and frame groove sights with the top strap stamped "ROGERS & SPENCER/UTICA N-Y" on either side of the sighting groove. Matching numbers on frame, barrel, cylinder, loading lever and butt with the number "2643" on the back of both grips. Small "B" inspection marks are stamped on most of the components. Fitted with smooth walnut grips with a script "RPB" cartouche on the lower left.
Condition: Fine. The revolver retains 40% original blue finish with the balance a smooth gray patina. The hammer and loading lever retain traces of original case colors. There are a few areas of minor pitting. The otherwise fine grips have a crudely repaired vertically split/reglued right rear panel, a series of minor dings on the bottoms and a few minor handling marks overall. The cartouche is crisp. Mechanically excellent.
This is one of an estimated 5,000 Army Model revolvers manufactured by Rogers & Spencer Co. for a U.S. contract issued in November 1864. Silver cone front and frame groove sights with the top strap stamped "ROGERS & SPENCER/UTICA N-Y" on either side of the sighting groove. Matching numbers on frame, barrel, cylinder, loading lever and butt with the number "2643" on the back of both grips. Small "B" inspection marks are stamped on most of the components. Fitted with smooth walnut grips with a script "RPB" cartouche on the lower left.
Condition: Fine. The revolver retains 40% original blue finish with the balance a smooth gray patina. The hammer and loading lever retain traces of original case colors. There are a few areas of minor pitting. The otherwise fine grips have a crudely repaired vertically split/reglued right rear panel, a series of minor dings on the bottoms and a few minor handling marks overall. The cartouche is crisp. Mechanically excellent.
Remington New Model Army Metallic Conversion Revolver
Lot # 1040 (Sale Order: 41 of 952)
Manufacturer: Remington Arms IncBarrel Length: 8 inch octagonModel: New ModelFrame Mat.: blueSerial #: 71498/911Low Est: 1600Condition: Fine. The revolver retains 50% plus original blue High Est: 2500Caliber: 46 RFOther: walnut
Remington New Model Army Metallic Conversion Revolver
This is a factory conversion example of the New Model Army revolver which has the rare patent marking on the cylinder. The top barrel flat has the two line patent date/address marking stamped over "NEW MODEL." The lower side of barrel has "911" near muzzle, "J" near hammer catch and the number "71498" near the frame. The left side of the silver plated brass trigger guard is stamped "UB." Under the right grip (frame strap) is number "429", under the left "9" over "11" then the number "71498."The cylinder is stamped "PATENTED APR 3rd 1855." Fitted with smooth varnished walnut grips.
Condition: Fine. The revolver retains 50% plus original blue finish with the balance a smooth brown-gray patina. The trigger guard retains 40% original silver plating and the hammer retains traces of original case colors. The grips are also fine with a series of minor pressure dents on the bottoms and some minor handling marks overall. Mechanically fine.
This is a factory conversion example of the New Model Army revolver which has the rare patent marking on the cylinder. The top barrel flat has the two line patent date/address marking stamped over "NEW MODEL." The lower side of barrel has "911" near muzzle, "J" near hammer catch and the number "71498" near the frame. The left side of the silver plated brass trigger guard is stamped "UB." Under the right grip (frame strap) is number "429", under the left "9" over "11" then the number "71498."The cylinder is stamped "PATENTED APR 3rd 1855." Fitted with smooth varnished walnut grips.
Condition: Fine. The revolver retains 50% plus original blue finish with the balance a smooth brown-gray patina. The trigger guard retains 40% original silver plating and the hammer retains traces of original case colors. The grips are also fine with a series of minor pressure dents on the bottoms and some minor handling marks overall. Mechanically fine.
Scarce Documented Civil War Era Austin T. Freeman Cartridge Conversion Revolver Pictured in "A Study
Lot # 1041 (Sale Order: 42 of 952)
Manufacturer: Freeman Austin TBarrel Length: 7 3/8 inch roundModel: ArmyFrame Mat.: blueSerial #: 930Low Est: 1400Condition: Good as period converted to cartridge and refinishHigh Est: 2250Caliber: 44 Henry RFOther: walnut
Scarce Documented Civil War Era Austin T. Freeman Cartridge Conversion Revolver Pictured in "A Study of Colt Conversion and Other Percussion Revolvers"
Manufactured in 1863-1864. This example has been converted to .44 Henry rimfire cartridge. The top strap of the frame has the standard markings. The serial number "930" is stamped on the underside of the barrel, the bottom of the loading lever, on the frame, on the back of the cylinder, on the back of the backing plate and on the right side of the butt strap under the grip. Fitted with smooth walnut two piece grips. This specific revolver is pictured and described on pages 424-427 of the book "A Study of Colt Conversion and Other Percussion Revolvers" by R. Bruce McDowell.
Condition: Good as period converted to cartridge and refinished. There are traces of blue finish on the hammer, loading lever and in the protected areas with a gray/brown patina on the balance. There are scattered scratches and dings overall. The grips are very good as revarnished. Mechanically needs work as cylinder does not rotate correctly.
Manufactured in 1863-1864. This example has been converted to .44 Henry rimfire cartridge. The top strap of the frame has the standard markings. The serial number "930" is stamped on the underside of the barrel, the bottom of the loading lever, on the frame, on the back of the cylinder, on the back of the backing plate and on the right side of the butt strap under the grip. Fitted with smooth walnut two piece grips. This specific revolver is pictured and described on pages 424-427 of the book "A Study of Colt Conversion and Other Percussion Revolvers" by R. Bruce McDowell.
Condition: Good as period converted to cartridge and refinished. There are traces of blue finish on the hammer, loading lever and in the protected areas with a gray/brown patina on the balance. There are scattered scratches and dings overall. The grips are very good as revarnished. Mechanically needs work as cylinder does not rotate correctly.
New Jersey Marked Colt Model 1861 Special Model Rifle-Musket Dated 1862 with Bayonet
Lot # 1042 (Sale Order: 43 of 952)
Manufacturer: ColtBarrel Length: 39 inch roundModel: 1861-MusketFrame Mat.: arsenal brightSerial #: NSNStock Mat.: walnutCondition: Very good plus, with some minor spotting and handlLow Est: 1400Caliber: 58High Est: 2250
New Jersey Marked Colt Model 1861 Special Model Rifle-Musket Dated 1862 with Bayonet
Originally developed for sale to the United States Government, Colt wound up with a quantity of 1861 Special Rifle-Muskets that had been rejected by the ordnance inspectors. Colt's loss, defrayed by selling the arms to Schuyler, Hartley & Graham, turned out to be a gain for several states, including New Jersey, who acquired the arms for their militia forces at below standard rate. Blade front and 3-leaf folding rear sights, with the American eagle on the bolster, "1862" on top of the chamber, conjoined "VP" on the upper left flat, "N.J" and "STEEL" on the left flat. The lock plate is marked "1862" to the rear of the hammer, and "U.S./COLT'S Pt F.A. Mfg Co/HARTFORD, Ct" ahead. Smooth straight grip stock, with a tulip head ramrod, three screw-secured "U" barrel bands, sling swivels, a "N.J" stamp opposite the lock, and a "U.S" marked buttplate. With a "US/C" marked socket bayonet, 21 inches overall with an 18 inch triangular spike.
Condition: Very good plus, with some minor spotting and handling marks on the arsenal bright steel. The stock is very good, with scratches and dents. Bayonet is good, with a mixed brown and gray patina and scattered handling marks. Mechanically very good.
Originally developed for sale to the United States Government, Colt wound up with a quantity of 1861 Special Rifle-Muskets that had been rejected by the ordnance inspectors. Colt's loss, defrayed by selling the arms to Schuyler, Hartley & Graham, turned out to be a gain for several states, including New Jersey, who acquired the arms for their militia forces at below standard rate. Blade front and 3-leaf folding rear sights, with the American eagle on the bolster, "1862" on top of the chamber, conjoined "VP" on the upper left flat, "N.J" and "STEEL" on the left flat. The lock plate is marked "1862" to the rear of the hammer, and "U.S./COLT'S Pt F.A. Mfg Co/HARTFORD, Ct" ahead. Smooth straight grip stock, with a tulip head ramrod, three screw-secured "U" barrel bands, sling swivels, a "N.J" stamp opposite the lock, and a "U.S" marked buttplate. With a "US/C" marked socket bayonet, 21 inches overall with an 18 inch triangular spike.
Condition: Very good plus, with some minor spotting and handling marks on the arsenal bright steel. The stock is very good, with scratches and dents. Bayonet is good, with a mixed brown and gray patina and scattered handling marks. Mechanically very good.
U.S. Civil War Remington Model 1863 "Zouave" Percussion Rifle with Sword Bayonet
Lot # 1043 (Sale Order: 44 of 952)
Manufacturer: Remington Arms IncBarrel Length: 32 1/2 inch roundModel: 1863-RifleFrame Mat.: blue/casehardenedSerial #: NSNStock Mat.: walnutCondition: Very fine, with 80% of the original blue finish, sLow Est: 2250Caliber: 58High Est: 3500
U.S. Civil War Remington Model 1863 "Zouave" Percussion Rifle with Sword Bayonet
Manufactured circa 1862-1865. Blade front and three leaf rear sights, with "1863" on the breech near the "V/P/eagle head" markings, "STEEL G.P" on the left flat and the bayonet lug on the right side near the muzzle. Casehardened lock plate, marked "1863" behind the hammer, "eagle/REMINGTON'S/ILION, N.Y.", "U.S." and "B" in front of the hammer. Smooth straight grip stock, with brass barrel bands, tulip head ramrod, a pair of cartouches on the reverse of the lock, "P" marked brass patch box and an "A/U.S." marked buttplate. With a brass-hilted sword bayonet, 25 inches overall with a "S" marked 20 1/8 inch blade and the hilt marked "C" and "B.H".
Condition: Very fine, with 80% of the original blue finish, showing a well aged brown patina with mild handling marks overall. The front sling swivel has come off. Fine case hardening is visible on the lock, with the color strongest in the area protected by the hammer and a mixed silver and brown color overall. Stock is fine, with a thin crack on the left side opposite the lock and some dents and scuffing overall. The bayonet is fair, with pitting concentrated at the tip. Mechanically excellent.
Manufactured circa 1862-1865. Blade front and three leaf rear sights, with "1863" on the breech near the "V/P/eagle head" markings, "STEEL G.P" on the left flat and the bayonet lug on the right side near the muzzle. Casehardened lock plate, marked "1863" behind the hammer, "eagle/REMINGTON'S/ILION, N.Y.", "U.S." and "B" in front of the hammer. Smooth straight grip stock, with brass barrel bands, tulip head ramrod, a pair of cartouches on the reverse of the lock, "P" marked brass patch box and an "A/U.S." marked buttplate. With a brass-hilted sword bayonet, 25 inches overall with a "S" marked 20 1/8 inch blade and the hilt marked "C" and "B.H".
Condition: Very fine, with 80% of the original blue finish, showing a well aged brown patina with mild handling marks overall. The front sling swivel has come off. Fine case hardening is visible on the lock, with the color strongest in the area protected by the hammer and a mixed silver and brown color overall. Stock is fine, with a thin crack on the left side opposite the lock and some dents and scuffing overall. The bayonet is fair, with pitting concentrated at the tip. Mechanically excellent.
Parker, Snow & Company Model 1861 Miller Conversion Breech Loading Rifle
Lot # 1044 (Sale Order: 45 of 952)
Manufacturer: Parker, Snow & CoBarrel Length: 39 inch roundModel: 1861Frame Mat.: brightSerial #: 618Stock Mat.: walnutCondition: Very good as converted, with mild spotting and hanLow Est: 950Caliber: 58High Est: 1400
Parker, Snow & Company Model 1861 Miller Conversion Breech Loading Rifle
Originally manufactured in 1864, this Parker, Snow & Company Rifle was one of approximately 2,000 upgraded with the Miller breech loading system by Meriden Manufacturing circa 1865-1867. Blade front and 3-leaf rear sights, with the lock plate marked "1864" behind the hammer and "eagle/U.S." and "PARKERS' SNOW&CO./MERIDEN.CONN." ahead of the hammer and the rimfire breechblock marked "W.H. & G.W. MILLER/PATENT MAY 23, 1865/MERIDEN MAN'F'G. CO./MERIDEN, CONN." on top and "618" on the bottom. Smooth stock, with three "U" marked barrel bands, "GR" and "6" cut into the left side of the buttstock, and a smooth "U S" marked buttplate.
Condition: Very good as converted, with mild spotting and handling marks on the overall bright steel. A few thin cracks/dings are present on the hammer. Stock is good, with some thin cracks around the lock plate and loading cutout, scattered dents and mild scratches and chips. Mechanically fine.
Originally manufactured in 1864, this Parker, Snow & Company Rifle was one of approximately 2,000 upgraded with the Miller breech loading system by Meriden Manufacturing circa 1865-1867. Blade front and 3-leaf rear sights, with the lock plate marked "1864" behind the hammer and "eagle/U.S." and "PARKERS' SNOW&CO./MERIDEN.CONN." ahead of the hammer and the rimfire breechblock marked "W.H. & G.W. MILLER/PATENT MAY 23, 1865/MERIDEN MAN'F'G. CO./MERIDEN, CONN." on top and "618" on the bottom. Smooth stock, with three "U" marked barrel bands, "GR" and "6" cut into the left side of the buttstock, and a smooth "U S" marked buttplate.
Condition: Very good as converted, with mild spotting and handling marks on the overall bright steel. A few thin cracks/dings are present on the hammer. Stock is good, with some thin cracks around the lock plate and loading cutout, scattered dents and mild scratches and chips. Mechanically fine.
William Horstmann & Sons Model 1850 Foot Officer's Sword with Scabbard
Lot # 1045 (Sale Order: 46 of 952)
Manufacturer: NoneLow Est: 1000Model: NoneHigh Est: 1600Condition: Good. Patches of spotting and brown patina are pre
William Horstmann & Sons Model 1850 Foot Officer's Sword with Scabbard
Regulation pattern Civil War officer's sword measuring 35 3/4 inches overall, with a 30 3/4 inch curved double fuller blade etched with patriotic designs and scrollwork on the sides, "IRON PROOF" on the spine, the Horstmann Philadelphia address on the right side, and a stamped "8" on the left ricasso. Cast brass guard and hilt, with cut through and engraved vine and oak leaf patterns, and a brass wire wrapped rayskin grip. With a gilt brass fitted brown leather scabbard.
Condition: Good. Patches of spotting and brown patina are present on the blade, with approximately 40% of the original nickel finish, showing strong etching overall. The hilt has turned a mixed aged patina overall, with some verdigris around the guard and minor handling marks on the grip wrap. Traces of original gilt finish are present on the scabbard fittings, especially around the suspension bands, with a dark aged patina on the brass, scuffing and cracks on the leather, and mild handling marks overall.
Regulation pattern Civil War officer's sword measuring 35 3/4 inches overall, with a 30 3/4 inch curved double fuller blade etched with patriotic designs and scrollwork on the sides, "IRON PROOF" on the spine, the Horstmann Philadelphia address on the right side, and a stamped "8" on the left ricasso. Cast brass guard and hilt, with cut through and engraved vine and oak leaf patterns, and a brass wire wrapped rayskin grip. With a gilt brass fitted brown leather scabbard.
Condition: Good. Patches of spotting and brown patina are present on the blade, with approximately 40% of the original nickel finish, showing strong etching overall. The hilt has turned a mixed aged patina overall, with some verdigris around the guard and minor handling marks on the grip wrap. Traces of original gilt finish are present on the scabbard fittings, especially around the suspension bands, with a dark aged patina on the brass, scuffing and cracks on the leather, and mild handling marks overall.
Regulation Civil War Ames Model 1850 Foot Officer's Sword and Model 1872 Style Officers Saber
Lot # 1046 (Sale Order: 47 of 952)
Manufacturer: NoneLow Est: 1500Model: NoneHigh Est: 2500Condition: The Model 1850 Foot Officers Sword is fair-good. T
Regulation Civil War Ames Model 1850 Foot Officer's Sword and Model 1872 Style Officers Saber
Manufactured circa 1862. The sword has a 31 1/2 inch single fuller blade acid etched and dry needle engraved with "US" and military motifs and floral sprays. The Ames trademark is etched on the obverse ricasso of the blade and stamped on the brass upper suspension band of the scabbard. The brass hilt has a single branch guard with pierced floral decorations, pommel with cast ancathas leaves on the back and rayskin grip wrapped with a double strand of brass wire. The black leather scabbard has two suspension rings mounted on wide brass bands and a brass drag. The Model 1872 Officer's saber has a narrow curved 33 inch single fuller blade with acid etched U.S. Eagle and Shield surrounded by floral sprays on the obverse and an interlinked "US" surrounded by floral sprays on the reverse. The ricassos are stamped with a France import stamp, a round gold proofmark and a New York importer's mark. The gold plated brass hilt generally conforms to the Model 1872 Officers Saber pattern with three branch cast guard and ray skin grip wrapped with a double strand of brass wire. The scabbard has a nickel plated body with cast brass gold plated throat, suspension bands and drag.
Condition: The Model 1850 Foot Officers Sword is fair-good. The blade has a silver gray patina with scattered spots of age discoloration and several nicks in the edge. The hilt is good. The brass pommel and guard have scattered age discoloration and minor handling marks. The grip is intact with moderate handling wear; the wire wrap is original and complete. The scabbard is good overall with smooth leather. The drag has numerous small dents and the edges have been altered. This is a good example of a regulation Civil War Ames Model 1850 Foot officers Sword that shows typical service wear. The Model 1872 Style Saber is very good overall. The blade retains 85% of the plated finish with sharp engraving. There is some scattered age spotting near the tip. The hilt retains about 60% of the gold plated finish and is very good. The rayskin grip is complete and the wire wrap is tight. The scabbard is very good retaining most of the original nickel plated finish.
Manufactured circa 1862. The sword has a 31 1/2 inch single fuller blade acid etched and dry needle engraved with "US" and military motifs and floral sprays. The Ames trademark is etched on the obverse ricasso of the blade and stamped on the brass upper suspension band of the scabbard. The brass hilt has a single branch guard with pierced floral decorations, pommel with cast ancathas leaves on the back and rayskin grip wrapped with a double strand of brass wire. The black leather scabbard has two suspension rings mounted on wide brass bands and a brass drag. The Model 1872 Officer's saber has a narrow curved 33 inch single fuller blade with acid etched U.S. Eagle and Shield surrounded by floral sprays on the obverse and an interlinked "US" surrounded by floral sprays on the reverse. The ricassos are stamped with a France import stamp, a round gold proofmark and a New York importer's mark. The gold plated brass hilt generally conforms to the Model 1872 Officers Saber pattern with three branch cast guard and ray skin grip wrapped with a double strand of brass wire. The scabbard has a nickel plated body with cast brass gold plated throat, suspension bands and drag.
Condition: The Model 1850 Foot Officers Sword is fair-good. The blade has a silver gray patina with scattered spots of age discoloration and several nicks in the edge. The hilt is good. The brass pommel and guard have scattered age discoloration and minor handling marks. The grip is intact with moderate handling wear; the wire wrap is original and complete. The scabbard is good overall with smooth leather. The drag has numerous small dents and the edges have been altered. This is a good example of a regulation Civil War Ames Model 1850 Foot officers Sword that shows typical service wear. The Model 1872 Style Saber is very good overall. The blade retains 85% of the plated finish with sharp engraving. There is some scattered age spotting near the tip. The hilt retains about 60% of the gold plated finish and is very good. The rayskin grip is complete and the wire wrap is tight. The scabbard is very good retaining most of the original nickel plated finish.
Very Fine Civil War U.S. Martially Inspected Remington New Model Army Percussion Revolver
Lot # 1047 (Sale Order: 48 of 952)
Manufacturer: Remington Arms IncBarrel Length: 8 inch octagonModel: New Model Army RevolverFrame Mat.: blueSerial #: 90782Low Est: 2750Condition: Very fine. The revolver retains 80% plus bright orHigh Est: 4000Caliber: 44 percussionOther: walnut
Very Fine Civil War U.S. Martially Inspected Remington New Model Army Percussion Revolver
Manufactured from 1863 to 1875. The top barrel flat is stamped with the 1858 patent date over the New York address over "NEW MODEL." The barrel and grip panels are numbered to the gun. Most of the major components are stamped with single letter sub-inspector marks including "D", "W", and "C." The revolver is fitted with smooth grips featuring a clear script cartouche on the left panel and "D" sub-inspector mark on the bottom of both panels.
Condition: Very fine. The revolver retains 80% plus bright original blue finish with the balance a smooth brown-gray patina. The hammer retains some strong original case colors. The grips are excellent showing some minor pressure dents with a crisp cartouche. Mechanically excellent.
Manufactured from 1863 to 1875. The top barrel flat is stamped with the 1858 patent date over the New York address over "NEW MODEL." The barrel and grip panels are numbered to the gun. Most of the major components are stamped with single letter sub-inspector marks including "D", "W", and "C." The revolver is fitted with smooth grips featuring a clear script cartouche on the left panel and "D" sub-inspector mark on the bottom of both panels.
Condition: Very fine. The revolver retains 80% plus bright original blue finish with the balance a smooth brown-gray patina. The hammer retains some strong original case colors. The grips are excellent showing some minor pressure dents with a crisp cartouche. Mechanically excellent.
Unmarked Miniature Brass Cannon with Carriage and Caisson
Lot # 1048 (Sale Order: 49 of 952)
Manufacturer: UnknownLow Est: 1000Model: CannonHigh Est: 1500Condition: Fine. The brass has a dark aged patina with some h
Unmarked Miniature Brass Cannon with Carriage and Caisson
This unmarked brass miniature 70 gauge percussion muzzle loading cannon measures approximately 13 inches in length and 1 5/8 inches in diameter. Mounted on a hardwood and brass carriage with a cast iron wheels and a brass priming canister. A removable brass caisson with two cast iron wheels is attached and includes a ammunition box and a charge canister. The overall measurements of the combination are approximately 21 inches long by 11 inches wide and 8 1/2 inches high at the axle line. Weight is approximately 25 pounds. Complete with seven iron 70 gauge cannon balls, a powder measure and a brass tipped ram.
Condition: Fine. The brass has a dark aged patina with some handling marks, minor high edge wear and a few scratches. The wood is very good with some scratches, a couple of minor surface cracks and the finish flaking. The cast wheels show some chipping of the black enamel finish.
This unmarked brass miniature 70 gauge percussion muzzle loading cannon measures approximately 13 inches in length and 1 5/8 inches in diameter. Mounted on a hardwood and brass carriage with a cast iron wheels and a brass priming canister. A removable brass caisson with two cast iron wheels is attached and includes a ammunition box and a charge canister. The overall measurements of the combination are approximately 21 inches long by 11 inches wide and 8 1/2 inches high at the axle line. Weight is approximately 25 pounds. Complete with seven iron 70 gauge cannon balls, a powder measure and a brass tipped ram.
Condition: Fine. The brass has a dark aged patina with some handling marks, minor high edge wear and a few scratches. The wood is very good with some scratches, a couple of minor surface cracks and the finish flaking. The cast wheels show some chipping of the black enamel finish.
Four Brass Bullet Molds
Lot # 1049 (Sale Order: 50 of 952)
Manufacturer: NoneLow Est: 1100Model: NoneHigh Est: 1600Condition: Very good to fine. All show a dark patina with som
Four Brass Bullet Molds
Two brass 2 chamber (round and conical) bullet molds one marked "MASS ARMS CO." and the other marked "CHICOPEE FALLS" and one unmarked brass 2 chamber (round) bullet mold. Also included is a wood handled single cavity Starr Army .44 bullet mold.
Condition: Very good to fine. All show a dark patina with some spotting, wear and marks from use.
Two brass 2 chamber (round and conical) bullet molds one marked "MASS ARMS CO." and the other marked "CHICOPEE FALLS" and one unmarked brass 2 chamber (round) bullet mold. Also included is a wood handled single cavity Starr Army .44 bullet mold.
Condition: Very good to fine. All show a dark patina with some spotting, wear and marks from use.
