Premiere Firearms Auction - Day 2

Premiere Firearms Auction - Day 2

Saturday, September 14, 2013  |  9:00 AM Central
Auction closed.
Premiere Firearms Auction - Day 2

Premiere Firearms Auction - Day 2

Saturday, September 14, 2013  |  9:00 AM Central
Auction closed.
Internet Premium: 20.5%
See Special Terms for additional fees
Cash Payment Discount: 2.5%
Share:

Description

Day 2- 2700 Lots “Fresh, Historic, and Rare” is the potent combination of words Rock Island Auction Company President Patrick Hogan has used to describe the RIAC upcoming September Firearms Auction.
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 4 of 39

Case and Accessories for a Colt Model 1848 Baby Dragoon Pocket Percussion Revolver

Lot # 1075 (Sale Order: 76 of 952)      

Case and Accessories for a Colt Model 1848 Baby Dragoon Pocket Percussion Revolver

The leatherette case measures nearly 10 inches wide, 5 1/2 inches deep and 1 3/4 inches tall and is configured to accept a Colt Model 1848 Baby Dragoon revolver with a 4 inch barrel and accessories. The case is lined in brown velvet and holds the following accessories: 1) a cylindrical powder flask featuring a plunger spout, 2) a "COLTS/PATENT" marked two cavity brass bullet mold and 3) an "L" shaped combination tool in niter blue finish.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine Cased Gustave Young Factory Engraved Colt Model 1851 Navy Revolver with Factory Letter

Lot # 1076 (Sale Order: 77 of 952)      

Fine Cased Gustave Young Factory Engraved Colt Model 1851 Navy Revolver with Factory Letter

This is a very nice example of a factory engraved Colt Model 1851 Navy revolver manufactured in 1862. This 4th Model Navy Revolver has the characteristic large round trigger guard, capping channel in the recoil shield cut-out and thin contour loading lever catch. The barrel is fitted with German silver front sight blade mounted in a dovetail at the muzzle. The top barrel flat is marked "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" in an engraved panel and "COLTS/PATENT" is stamped on the left side of the frame surrounded by engraved scroll work. The cylinder is roll-engraved with the Texas Navy battle scene and "COLTS PATENT No.2993". A "C" is stamped on the left rear of the trigger guard bow and an "E" is stamped above or below the serial number which indicates the revolver was designated for special finish or engraving at the factory. The complete serial number "132993" is located on the barrel, frame, trigger guard and back strap. The partial serial number "2993" is stamped on the loading lever and cylinder, and "32993" on the wedge and arbor pin. The revolver is factory engraved with Germanic scroll work on a punch-dot background by Master Engraver Gustave Young. The hammer is engraved with Youngs characteristic wolf head motif. The engraving is very similar to the embellishment on the Model 1851 Navy Revolver, serial number "132969/E", illustrated on page 139 of "THE COLT ENGRAVING BOOK", Volume One by R.L. Wilson and described by Wilson as "modified Gustave Young scroll style". The engraving coverage is what Wilson describes as "Style number 2 engraving". The barrel and cylinder are finished blue, silver plated grip frame and casehardened remaining parts. The revolver is fitted with a smooth nicely figured fancy one-piece varnished walnut grip. The revolver comes in a factory English style mahogany case with five compartments and purple velvet lining. In the case is an Eley Bros. cap tin (partially full), blue iron double cavity bullet mold for balls and conical bullets marked "D" on the bottom of the right leg, combination nipple wrench/screw-driver, brass American Flask & Cap Co. Coat of Arms pattern powder flask with fixed charger embossed with crossed revolvers, stars, eagle with crossed flags and a cannon and a package of combustible envelope cartridges, (partially open).

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 27,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Cased Colt Model 1849 Percussion Pocket Revolver with Accessories

Lot # 1077 (Sale Order: 78 of 952)      

Cased Colt Model 1849 Percussion Pocket Revolver with Accessories

This is an example of a Colt Model 1849 Pocket revolver that was manufactured in 1857. The top barrel flat is marked "{ADDRESS SAML COLT/NEW YORK CITY}", the left side of the frame is marked "COLTS/PATENT" and the cylinder is roll-engraved with the stagecoach holdup scene and "COLTS PATENT/No 136937". The complete matching serial number is marked on the bottom of the barrel lug, frame, trigger guard, cylinder and back strap. The partial serial number, "36937" is stamped on the wedge, and "6937" on the arbor pin and loading lever. Fitted with a smooth one-piece varnished walnut grip. The revolver is complete with a wooden American style case lined with wine colored velvet. The case has five compartments and contains a two cavity bullet mold with "COLTS/PATENT" marked sprue cutter, eagle flask, Eley Bros cap tin (partially full), "L" shaped screwdriver/nipple wrench, two 6 count boxes of combustible envelope cartridges (sealed in plastic wrap), approximately and a key.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Factory Cased Colt Model 1855 "Root" Percussion Pocket Revolver with Accessories

Lot # 1078 (Sale Order: 79 of 952)      

Factory Cased Colt Model 1855 "Root" Percussion Pocket Revolver with Accessories

Manufactured in 1856, this is a fine example of a Model 2 Colt "Root" revolver. The top barrel flat has the two line Hartford address with the pointing finger and Maltese crosses: "COLT'S PT./1855" followed by "ADDRESS COL. COLT/HARTFORD CT U.S.A." The cylinder is marked "COLT'S PATENT/No 3481" and is roll engraved with the Cabin and Indian fight scene. The matching serial number is found on the butt, barrel and cylinder. The revolver has a blue finish with casehardened hammer and loading lever and is fitted with a smooth one piece grip. The revolver is complete with an original case lined in brown velvet, an unmarked eagle flask, two cavity brass bullet mold featuring a "COLT'S/PATENT" marked sprue cutter, a UMC percussion cap tin, case key, and round and conical lead bullets.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1860 Army Cartridge Conversion Revolver

Lot # 1079 (Sale Order: 80 of 952)      

Colt Model 1860 Army Cartridge Conversion Revolver

Manufactured in 1866. The top of the barrel has the one line New York address, the left side of the frame is marked with the two line 1871 and 1872 patent dates over "COLTS/PATENT", and the cylinder is roll engraved with the Texas naval battle scene, and marked "COLTS PATENT No 5445". The matching serial number is marked on the bottom of the barrel (restamped), frame, trigger guard and back strap. The wedge is un-numbered. Fitted with smooth varnished one-piece walnut grip.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Fine Colt Model 1862 Police Revolver

Lot # 1080 (Sale Order: 81 of 952)      

Very Fine Colt Model 1862 Police Revolver

Manufactured in 1861. The revolver has the distinctive combination of streamlined .36 caliber barrel and fluted cylinder. High polish Colt commercial blue finish with the loading lever, frame and hammer casehardened and the brass trigger guard and back strap silver plated. The one piece grip has a piano varnished finish. The top of the barrel is roll-stamped "ADDRESS COL SAML COLT NEW-YORK U.S. AMERICA.". "COLTS/PATENT" is roll-stamped on the left side of the frame. "PAT. SEPT. 10th 1850" is stamped in one cylinder flute. The serial umber is stamped on the bottom of the barrel lug, frame, trigger guard, back strap, wedge, rear face of the cylinder and bottom of the cylinder pin.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Two Colt Two Chamber Bullet Molds

Lot # 1081 (Sale Order: 82 of 952)      

Two Colt Two Chamber Bullet Molds

Both molds are blued steel 2-chamber (round and conical) construction, with "COLT'S/PATENT" atop the sprue cutters. 1) 31 caliber mold, with "31Pkt" marked on the right side of the body. 2) 36 caliber mold, with no additional markings.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 800.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1871-1872 Open Top Single Action Revolver

Lot # 1082 (Sale Order: 83 of 952)      

Colt Model 1871-1872 Open Top Single Action Revolver

Manufactured circa 1872-1873, this was one of approximately only 7,000 manufactured. The Model 1871-1872 was the first non-conversion Colt cartridge revolver, and was a direct predecessor of the hugely successful Colt Single Action Army Revolver. The top of the barrel is marked "-- ADDRESS COL. SAML COLT NEW - YORK U.S. AMERICA --", the left side of the frame is marked with the two July 1871 and 1872 patent dates, the cylinder is roll engraved with the Texas naval scene and "COLTS PATENT No "345". The matching serial number is marked on the barrel, frame, trigger guard and back strap. The loading gate is numbered "302". Blade front sight and the rear sight is a integral notch on the breech end of the barrel. Fitted with a one-piece varnished walnut grip.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Post-Civil War Colt Model 1860 Army Percussion Revolver

Lot # 1083 (Sale Order: 84 of 952)      

Post-Civil War Colt Model 1860 Army Percussion Revolver

Manufactured in 1870. The top of the barrel is marked "-ADDRESS COL. SAML. COLT NEW-YORK U.S. AMERICA-" and "COLTS/PATENT" is on the left side of the frame. The cylinder is roll engraved with the Texas naval battle scene and marked "ENGAGED 16 MAY 1843" on the front edge and "COLTS PATENT No 646". The complete matching serial number is marked on the bottom of the barrel lug, frame, trigger guard and back strap, and the cylinder and cylinder pin are marked with the partial serial number "646". The wedge is un-numbered. The barrel, cylinder and back strap have the Colt high polish blue finish. The loading lever, frame and hammer are color casehardened and the brass trigger guard is silver-plated. Blade front and hammer notch rear sights, and fitted with a smooth one-piece walnut grip.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,700.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Colt Model 1851 Navy Percussion Revolver

Lot # 1084 (Sale Order: 85 of 952)      

Colt Model 1851 Navy Percussion Revolver

Produced in 1867. Brass bead front and hammer notch rear sights, with the one-line New York address on the barrel, "COLTS/PATENT" on the left side of the frame and "36 CAL" on the trigger guard. Fitted with a Texas Navy style cylinder, a capping groove in the recoil shield, round trigger guard and a wide loading lever latch. Matching full numbers present on the barrel frame, and grip straps, matching partial numbers on the cylinder and cylinder pin, and "4504" on the wedge. Smooth one piece walnut grips.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare and Desirable Three Digit Serial Number Colt Model 1860 Fluted Army Revolver with Carved Ivory

Lot # 1085 (Sale Order: 86 of 952)      

Rare and Desirable Three Digit Serial Number Colt Model 1860 Fluted Army Revolver with Carved Ivory Grip

Manufactured in 1860 (the first year of production), this revolver is one of approximately 4,000 Colt Model 1860 Army Revolvers manufactured with the fluted cylinder. These revolvers appear in the first 8,000 serial numbers and have a four-screw frame with recoil shields cut for an attachable shoulder stock. The top of the barrel is marked "-ADDRESS COL SAML COLT HARTFORD CT-" and "COLTS/PATENT" is stamped on the left side of the frame. One cylinder flute is marked with the September 1850 patent date, and the matching serial number is marked on the bottom of the barrel, frame, trigger guard, backstrap, wedge and cylinder pin. This revolver has a .44 caliber barrel that is 8 inches long. Both 7 1/2 inch and 8 inch barrels were manufactured for the fluted cylinder variation. Generally the 7 1/2 inch barrel was part of the early production run of the fluted cylinder Model 1860 revolvers. The trigger guard is brass and the back strap is iron, with both being silver plated. The barrel and cylinder were once blue with a casehardened frame. Fitted with a one-piece checkered ivory grip with a relief carved Mexican eagle on the left side.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,750.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Civil War Martially Inspected Colt Model 1860 Army Percussion Revolver

Lot # 1086 (Sale Order: 87 of 952)      

Civil War Martially Inspected Colt Model 1860 Army Percussion Revolver

Manufactured in 1862 with a four screw frame cut for a shoulder stock. The top of the barrel is marked with the one line New York address and "COLTS/PATENT" on the left side of the frame. There are small single letter inspection marks on most of the major components. There is a double struck star stamp present on the right rear trigger guard (origin unknown, possibly retailer mark). The complete matching serial number is marked on the barrel, frame, trigger guard, back strap, and the matching partial number "7607" is marked on the cylinder pin, and the wedge and cylinder are un-numbered. The cylinder is also void of the engraved scene. There are two five pointed stars stamped on the right trigger guard shoulder. Blue finish with casehardened frame and loading lever. Fitted with a one-piece smooth walnut grip with a faint boxed cartouche on each side and crude initials carved on the bottom.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 2,250.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Eight Antique Handgun-Caliber Bullet Molds, Mostly Colt Marked

Lot # 1087 (Sale Order: 88 of 952)      

Eight Antique Handgun-Caliber Bullet Molds, Mostly Colt Marked

All molds in this lot are in dual chamber (round and conical) configuration, all but two equipped with a "COLTS/PATENT" marked sprue cutter and one of the others marked "COLTS/PATENT" on top of the body. 1) Steel 36 caliber mold, no additional markings. 2) Steel 31 caliber mold, marked "31Pkt" on the right. 3) Brass 31 caliber mold, no sprue cutter. 4) Brass 31 caliber mold, no other markings. 5) Steel military inspected 1851 Navy 36 caliber mold, marked "S" on the cutter and left handle, "wat" on the left side. 6) Brass 44 caliber mold, completely unmarked, with holes drilled through the handles for mounting extensions. 7) Steel 36 caliber mold, with "Z" on the cutter, "G.G.S." on the left and "waj" on the right. 8) Brass 36 caliber mold, marked "S" on the right.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 900.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Outstanding Cased Early Production Colt Model 1860 Fluted Cylinder Army Revolver

Lot # 1088 (Sale Order: 89 of 952)      

Outstanding Cased Early Production Colt Model 1860 Fluted Cylinder Army Revolver

This is an outstanding example of a scarce early production Colt Model 1860 Army Revolver that was manufactured in 1860. It is estimated that only approximately 4,000 fluted cylinder Model 1860s were manufactured. The revolver has a fluted cylinder, 7 1/2 inch barrel and four-screw frame. The top of the barrel is marked with the early "-ADDRESS SAML COLT HARTFORD CT.-" marking and the left side of the frame is stamped "COLT'S/PATENT". "PATENTED SEPT 10th 1850" is marked in one of the cylinder flutes. The complete matching serial number, "1504" is marked on the barrel, frame, trigger guard, back strap, cylinder and cylinder arbor. The wedge is numbered "504". The barrel and cylinder are finished blue, silver plated grip frame and casehardened remaining parts. Fitted with a smooth varnished one piece walnut grip. Most of the early commercial Model 1860 Army Revolvers were privately purchased for use in the Civil War and many of the fluted cylinder Model 1860 Revolvers were shipped to dealers in the South before the start of hostilities. As a result the survival rate of the 4,000 or so fluted cylinder M1860 Army revolvers manufactured by Colt is low and the revolvers are rarely encountered with any amount of original finish. The revolver comes in a mahogany case with red velvet lining. The case has four compartments and contains powder flask (crossed revolvers/stars/eagle/cannon motif), a two cavity iron bullet mold with "COLTS/PATENT" marked sprue cutter, "44R" on the right block and period stamp "F.K.W." on the bottom of the leg block, and an empty Eley Bros. cap tin.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 40,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare, Historic and Fine Colt Fluck Dragoon Revolver Issued to the 2nd Mounted U.S. Rifles and Later

Lot # 1089 (Sale Order: 90 of 952)      

Rare, Historic and Fine Colt Fluck Dragoon Revolver Issued to the 2nd Mounted U.S. Rifles and Later the Personal Sidearm of George Kippen a Significant 1849er

This is an extremely rare Colt First Model "Fluck" Dragoon Percussion Revolver as issued to the Second U. S. Mounted Rifles in the spring of 1849, with later ?49er? Gold Rush documentation. Never presented for sale to the collecting fraternity until this auction, it is reasonable to assume it to be the most historic of this rare variation ever brought to public sale. The consignor spent 3 years researching this revolver until finally finding the rock-solid evidence of its period ownership. "KIPPEN. 1853." is handsomely carved on the right side of the grip and the top of the back strap and butt are stamped with a very small but professional italicized mark reading, ?G. Kippen". This historically significant and truly fine condition ?Fluck? Dragoon Revolver was undoubtedly carried by a member of the Second U. S. Mounted Rifles on their journey to Oregon, leaving Fort Leavenworth, Kansas, in the spring of 1849. The second contract of Fluck Revolvers were issued to this unit on their expedition. It is known that after the discovery of gold in California, several of these troopers deserted over the next several months and many others were transferred to forts to the South. During extensive research, no ?G. Kippen? was found to have served in any branch of the U.S. military, and thus the search for the ?Kippen Fluck? continued until earlier this year when a routine internet search for ?G. Kippen? uncovered an antique silver spoon for sale on Ebay. The back of the spoon was stamped with a common style of silversmith touchmark that was bold and clear ?G. Kippen.? The exact same touchmark on the straps of our Fluck Dragoon! Mystery solved! Research on the touchmark found that George Kippen was a silversmith by trade and worked with his father in Bridgeport, Connecticut, until gold was discovered in California. The California Gold Rush of 1849 significantly changed America during the first half of the 19th century. Thousands of people traveled to San Francisco and the surrounding area in the pursuit of gold. The journey to San Francisco, whether by land or sea, was daunting. Nonetheless, gold fever resulted in a remarkable population boom of the California territory which reached some 100,000 non-natives by the end of 1849. Prior to 1848 this figure was less than 1,000! Kippen was part of a group of gold-seeking ?49ers? that became shipwrecked while sailing around Cape Horn for San Francisco. The details and location of the shipwreck are not known but the group eventually made it to "the central metropolis of the new frontier." With a company of others, Kippen assisted in operating a mine north of Sacramento constructing canals and sluices to carry water. The project was a failure and abandoned, but Kippen continued in California and would operate in both the north and south of the state, a true gold-seeking ?49er?! He would go on to become one of the original members of the Arizona Copper Mining Company in 1854 and resided in Arizona until his death in 1868 at the age of forty-nine. Further research has found that while Kippen was attached to the Arizona Copper Mining Company, he resided at Fort Yuma, Arizona Territory. Others at the Fort included members of the U.S. military, including Levi C. Bootes, a soldier that the consigner recalled as being in the Mounted Rifles from previous research. It is almost certain that Kippen received this gun from a soldier or directly from the Military for his personal protection and use. A period New York Newspaper reported that Kippen once assisted authorities attempting to track down two murderers. In 1857 a Christopher Forchet was repeatedly stabbed and the severity of the attack left his right arm nearly removed, his chest opened and his lungs punctured. Kippen assisted Forchet to the hospital at Fort Yuma. Once able to speak, Forchet told his rescuers that he and his two traveling companions had been attacked by two Mexicans that had been traveling with them. The paper further reported that Kippen and another man went looking for the attackers "armed with Sharps rifles and six shooters." After nearly 6 hours of searching Kippen and his riding partner found the dead Canadians who were "literally chopped in pieces." The newspaper reported that the motive of the attack was likely over money. Over $1,000 in cash was being carried between the three Canadians. Forchet, however, was still in possession of his $800.00 when he was brought to Fort Yuma. The fate of the murderers is unknown. Note that the newspaper reported that Kippen and his partner carried six shooters when they went searching for the murderers. We can only speculate, but it is probable that this six shot Colt Dragoon was with Kippen during this manhunt. Kippen does mention the incident in his diary stating, "Did not succeed in overtaking [the two mu

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 27,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce Early Production Colt Model 1871-72 Open Top Revolver with Model 1851 Attachable Canteen Stoc

Lot # 1090 (Sale Order: 91 of 952)      

Scarce Early Production Colt Model 1871-72 Open Top Revolver with Model 1851 Attachable Canteen Stock

Colt Model 1871-1872 Open Top Revolver with rare features and Ordnance inspected canteen stock. The revolver has several rare features which include: (1) early style loading gate with internal spring, (2) navy size grip and (3) iron trigger guard and back strap. In addition, the heel of the back strap has a milled groove to accept a shoulder stock yoke and the back strap has a rectangular opening for the stock hook. The revolver has the typical Model 1871-72 Open top features which include: Richards-Mason ejector housing with target pattern ejector head, barrel with integral rear sight at the breech, six-shot straight cylinder with Texas Navy battle scene and hammer with rimfire firing pin and bordered knurled spur. The top of the barrel is roll-stamped "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-". "COLTS/PATENT" is stamped in two lines on the left side of the frame. The serial number "47" is stamped on the bottom of the barrel lug, frame, trigger guard and back strap. All of the visible serial numbers match. The attachable shoulder stock is the rare canteen variation with brass furniture. The stock has a hook in the yoke that engages the slot milled in the revolver back strap and a hook that fits the milled groove in the butt and is tightened by a thumbscrew. The stock is oil finished walnut with a brass yoke and buttplate. The sling swivels, canteen cap, yoke hook and thumb screw are iron. The right side of the stock wrist is stamped with an Ordnance final inspection mark that consists of the script initials "WAT" (MAJ. William A. Thorton) surrounded by an oval border. "M" is stamped on the underside of the yoke and the heel of the buttplate. "C" is stamped on the top of the yoke. The "WAT" inspection mark pre-dates the Civil War and indicates that the stock dates from the 1850s. The "M" markings may indicate that the stock was an Ordnance "Model" piece and the "C" may be an Ordnance condemnation mark. Colt canteen attachable stocks with ordnance inspection marks are extremely rare. The modifications to the revolver back strap for stock attachment are period and well executed but are probably not factory work.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 32,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Desirable U.S. Colt Third Model Dragoon Percussion Revolver

Lot # 1091 (Sale Order: 92 of 952)      

Desirable U.S. Colt Third Model Dragoon Percussion Revolver

Manufactured in 1853. The revolver has the round brass trigger guard and rectangular cylinder stops found on Third Model Dragoons. The top flat of the barrel is marked "ADDRESS SAML COLT NEW YORK CITY-", the left side of the frame is marked "COLTS/PATENT" over "U.S.", the left upper front of the trigger guard is marked with a small "F" and the left shoulder "G". The complete matching serial number is stamped on the barrel lug, frame, trigger guard and back strap, and the partial number "3577" on the loading lever, wedge and arbor pin, and the cylinder is mis-matched (12664). Standard brass blade front sight and hammer notch rear sight and fitted with smooth one-piece walnut grip with a visible cartouche on each side.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Scarce New Haven Arms Company Volcanic Lever Action Carbine Serial Number 8

Lot # 1092 (Sale Order: 93 of 952)      

Scarce New Haven Arms Company Volcanic Lever Action Carbine Serial Number 8

Manufactured by the New Haven Arms Co. c. 1857. The carbine has the distinctive blue octagon barrel with integral magazine and brass gunmetal receiver, cartridge follower and crescent buttplate. The hammer and lever are casehardened. The straight grain American walnut stock has a high polish piano finish. The barrel has a nickel silver half moon front sight. A screw adjustable rear sight is mounted on the top of the receiver. The top of the barrel is roll-stamped "NEW HAVEN CONN. PATENT FEB. 14, 1854" . The marking indicates that this carbine was manufactured by the New Haven Arms Company after the Volcanic Arms Company was reorganized by Oliver Winchester in April 1857. A rack number "46" is boldly stamped on the bottom of the receiver behind the cartridge elevator. The serial number "8" is stamped on the lower left side of the receiver tang, on the heel of the stock beneath the buttplate, on the inside of the buttplate and on the shanks of the hand fitted buttplate and lower tang screws. The Volcanic carbines and pistols were revolutionary firearms that featured self-contained primed cartridges, spring loaded magazines and lever actions. The basic design of the Volcanic carbine formed the basis for the more successful New Haven Arms Henry and Winchester Model 1866 and Model 1873 rifles. Shirt-maker Oliver Winchester's investment in the Volcanic Repeating Arms Company introduced him to firearms manufacturing.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 22,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine U.S. Contract New Haven Arms Co., Henry Lever Action Rifle

Lot # 1093 (Sale Order: 94 of 952)      

Fine U.S. Contract New Haven Arms Co., Henry Lever Action Rifle

Manufactured by the New Haven Arms Co., in December 1863. This rifle is one of 1,100 Henry Rifles purchased by the Ordnance Department to arm the 1st District of Columbia Cavalry Regiment. The first 300 Henry Rifles purchased for the 1st D.C. Cavalry were commercial production rifles in the 2000-3000 serial number range. This rifle is one of the 800 Henry Rifles in the 3,000-4,000 serial number range that were manufactured under an Ordnance Department Contract and stamped with Ordnance inspection marks. These are the only fully inspected Henry Rifles purchased by the Ordnance Department and carried in action during the Civil War. During April-May 1865 the Ordnance Department purchased 627 Henry Rifles to arm the 3rd U.S. Veteran Volunteer Infantry; these rifles did not have Ordnance inspection marks and were issued too late to see action during the Civil War. The 1st D.C. Cavalry was commanded by Col. Lafayette Baker; provost marshal for the District of Columbia. Baker reported directly to Secretary of War Edwin Stanton. The primary mission of the 1st D.C. Cavalry was to eliminate Confederate partisan rangers in Northern Virginia. In the summer of 1864, the 1st D.C. Cavalry was assigned to 1st Brigade, Katuz's Cavalry Division, Department of Virginia and saw extensive action in the Petersburg and Appomattox Campaigns. A large number of the U.S. contract Henry Rifles were captured by Confederate cavalry during the actions around Petersburg. Although many Henry Rifles were privately purchased by individual Federal soldiers during the Civil War, the 800 Henry rifle in the 3,000-4,000 serial number range are the only U.S. Ordnance inspected government issued Henry Rifles used in action during the Civil War. The rifle has a blue octagon barrel and integral magazine, casehardened hammer and lever and brass receiver and buttplate. The stock is varnished walnut. The barrel has a square back nickel silver front sight and dovetail mounted, folding leaf rear sight with 900 yard center notch. The magazine has the second style, large, brass follower. The second style receiver lacks the rear sight dovetail found on rifles up to about serial number 3,000. The first style buttplate has a rounded heel. The rifle is correctly not fitted with a sling swivel on the stock and loop for a sling hook on the barrel. The butt trap contains an original four-piece jointed wooden cleaning rod issued with Henry Rifles in this serial number range. The top of the barrel is roll-stamped with the two-line legend: "HENRY'S PATENT OCT.16.1860./MANUFACT'D BY THE NEWHAVEN ARMS.CO. NEWHAVEN. CT." This is the slightly larger, second style, legend with all Roman (serifed) letters that was first used around serial number 3700. The serial number "3726" is stamped on the top of the barrel between the rear sight and the receiver, on the lower left side of the receiver tang, in the upper tang inlet of the stock, on the inside of the buttplate and on the shanks of the two hand fitted buttplate screws. All of the visible serial numbers match. The right side of the rifle barrel is stamped with the block "C.G.C." initials of Ordnance Sub-Inspector Charles G. Chapman. Chapman's inspection mark consisting of the script initials "CGC" with an oval border is stamped on the right side of the stock wrist. A single "H" New Haven Arms Co. inspection mark is stamped on the right side of the barrel below the sub-inspector's mark. An "HH" inspection mark is stamped on the right side of the receiver adjacent to the barrel inspection marks. A single "H" inspection mark is stamped on the right side of buttplate heel and an "H" mark is stamped immediately below it on the stock.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 65,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Very Fine, Scarce Early Production, First Model Winchester 1873 Rifle with Factory Letter

Lot # 1094 (Sale Order: 95 of 952)      

Very Fine, Scarce Early Production, First Model Winchester 1873 Rifle with Factory Letter

Scarce First Model Winchester 1873 Rifle with Cody Firearms Museum letter. The letter states that the rifle has a 24 inch round barrel and was shipped from the Winchester warehouse on September 21, 1874. The rifle has a blue barrel, magazine, forearm cap and receiver. The hammer, lever and crescent buttplate are casehardened. The stock and forearm are straight grain black walnut with an oil finish. The round barrel has a dovetail mounted sporting front sight with a nickel silver blade and a sporting rear sight with knurled edges. The receiver has the distinctive First Model dust cover with raised oval thumbprint and grooved guides on the sides. The first style lever latch has visible threads. The upper receiver tang is drilled and tapped for a rear sight. The crescent buttplate has a sliding brass trap door and the butt trap contains a four piece jointed steel cleaning rod. The top of the barrel is roll stamped with the legend "WINCHESTER'S-REPEATING-ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860." ahead of the rear sight. The upper receiver tang is roll stamped "MODEL 1873" in fancy letters. The serial number "2232" is stamped in script numerals on the lower tang between the lever latch and the rear tang screw.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 15,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Winchester Model 1886 Lever Action Rifle with Factory Letter Once in the Hank Williams Jr. Collectio

Lot # 1095 (Sale Order: 96 of 952)      

Winchester Model 1886 Lever Action Rifle with Factory Letter Once in the Hank Williams Jr. Collection

Winchester Model 1886 Sporting Rifle manufactured in 1896. The rifle has a casehardened receiver, forearm cap, hammer, lever and crescent buttplate. The octagon barrel, full length magazine, bolt and loading gate have a blue finish. The stock and forearm are straight grain American walnut. The barrel has a standard sporting style front sight with nickel silver blade and a folding adjustable leaf sight graduated to 1,000 yards. A folding combination rear sight is mounted on the receiver tang. The top of the barrel is roll stamped with the two line legend "-MANUFACTURED BY THE-/-WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. US.A-" ahead of the rear sight. The caliber designation, "45-70" is stamped on the top of the barrel at the breech. The 1884/1885 patent dates are stamped on the lower tang behind the trigger and the serial number "107729" is stamped in script numerals ahead of the rear tang screw. Included with the rifle are a .45-90 single cavity bullet mold and loading tool. The rifle is accompanied by a letter signed by Hank Williams Jr. on "Deadly Nostalgia" letterhead that describes the rifle and states that it was in his personal collection. The accompanying factory letter verifies the rifle configuration, 45/70 caliber, octagon barrel, plain trigger, that it was received in the warehouse on April 13, 1896 and shipped to order number 22296 on October 26, 1896.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,500.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Outstanding Presentation Inscribed Early Production Winchester Second Model 1866 Carbine with Henry

Lot # 1096 (Sale Order: 97 of 952)      

Outstanding Presentation Inscribed Early Production Winchester Second Model 1866 Carbine with Henry Patent Barrel Address

This is an exceptional example of a Winchester Model 1866 Carbine that was manufactured in 1868. The carbine has the early Model 1866 features which include: "HENRY'S-PATENT OCT.16.1860/KING'S-PATENT-MARCH 29.1866" barrel markings, receiver with flare at the junction with the forearm, single upper tang screw and crescent brass buttplate with sharp heel. The left side plate is inscribed "D. Edwin Hawley/New York/from H.E.H. Dec.25th 1868." A simple internet search has found a D. Edwin Hawley of New York registered at Gun's American Agency, No. 17 Charlotte Street, Bedford Square, London, England, Sept. 10, 1864 and listed as a Union League Club Member of New York (1868). According to the Club's website, the Union League Club was "founded in 1863 by a group of concerned citizens to help preserve the Union." Members of the Club helped to establish The Metropolitan Museum of Art in 1870 and the Sanitary Commission (predecessor to the American Red Cross) as well as helping to build of the Statue of Liberty and Lincoln Monument in Union Square, New York. Over the past 150 years club members have included 15 Presidents, members of Congress, diplomats, cabinet members and chief executive officers of major corporations. J.P. Morgan, J.D. Rockefeller, Theodore Roosevelt, General William T. Sherman, Ulysses S. Grant, John Jay, William Cullen Bryant, Chester A. Arthur and Thomas Nast were all members. Preliminary research places D. Edwin Hawley among the elite socialites of New York society. Further research could discover some interesting results. The carbine has an upper barrel band with integral iron front sight blade, early threaded magazine cap, second style two-position carbine rear sight, staple-mounted saddle ring on the left side of the receiver and hinged butt trap. The butt trap contains a three piece jointed steel cleaning rod. The barrel, magazine tube and barrel bands are blue. The hammer and lever are casehardened and the loading gate is niter blue. The straight grain walnut stock and forearm have a varnish finish. The serial number, "16705", is stamped on the lower left side of the tang beneath the stock, in the upper tang inlet of the stock and on the inside of the buttplate. All of the serial numbers match. The assembly marks "CV" and the "W" factory inspection mark are stamped on the left side of the tang in front of the serial number.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 40,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Fine Winchester Model 1876 Lever Action Rifle with Accessories and Factory Letter

Lot # 1097 (Sale Order: 98 of 952)      

Fine Winchester Model 1876 Lever Action Rifle with Accessories and Factory Letter

Winchester Model 1876 Rifle with factory letter which identifies it as "Rifle, Caliber : 40/60" with octagon barrel and plain trigger. The letter states this rifle was shipped from the Winchester warehouse on October 27, 1885. The rifle has the Third Style receiver with integral dust cover rail and dust cover with serrated edges. The rifle has a full octagon barrel and full length magazine. The barrel has the original dovetail mounted sporting style front sight with adjustment screw and nickel silver blade and a sporting rear sight with serrated edges. The oil finished stock and forearm are straight grain American walnut. The stock has a crescent steel buttplate with sliding brass trapdoor. The barrel, magazine, forearm cap and receiver have the Winchester commercial blue finish The hammer, lever and buttplate are casehardened. The top of the barrel is roll-stamped "WINCHESTER'S-REPEATING-ARMS.NEW HAVEN. CT./KING'S -IMPROVEMENT-PATENTED-MARCH 29. 1866. OCTOBER 16. 1860" ahead of the rear sight and marked with the caliber designation "CAL 45-60" at the breech The caliber "40-60" is engraved on the bottom of the cartridge elevator. The upper receiver tang is roll-stamped "{MODEL 1876}" in fancy letters with foliate devices at either end. The serial number "49547" is located on the lower receiver tang between the lever latch and the rear tang screw. The rifle is complete with a Winchester loading tool and single cavity bullet mold. The loading tool is blued and has the Winchester markings on one side and "40-60 W.C.F." markings on the opposite side. The single cavity bullet mold has a commercial blue finish and walnut handles with the "40-60 W.C.F." caliber designation on one handle.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Special Order Winchester Model 1886 Deluxe Lever Action 45-70 Rifle with Factory Letter

Lot # 1098 (Sale Order: 99 of 952)      

Special Order Winchester Model 1886 Deluxe Lever Action 45-70 Rifle with Factory Letter

This is a nice example of a special order Winchester Model 1886 Fancy Sporting Rifle manufactured in 1895. The top barrel flat ahead of the rear sight is marked "-MANUFACTURED BY THE-/-WINCHESTER REPEATING ARMS CO. NEW HAVEN. CONN. U.S.A.-" and "45-70" is on the top flat at the breech. The upper tang marking is covered by a tang mounted short range peep sight. The lower tang is marked with the two line 1884/1885 patent dates and the serial number at the rear. The barrel is fitted with a rare Lyman folding combination front sight with an ivory bead and a folding leaf rear sight graduated to 300 yards. Blue barrel and half magazine tube, niter blue bolt and loading gate, and casehardened remaining parts and mounted with a deluxe nicely figured multi-point checkered walnut forearm with a steel end cap and pistol grip stock with ebony insert in the bottom of the grip and a checkered hard rubber Winchester shotgun buttplate. The accompanying factory letter verifies the rifle configuration, 45/70 caliber, 1/2 Octagon barrel, 1/2 magazine, "4 cartridges", plain trigger, checkered stock with pistol grip, shotgun butt with rubber buttplate, and that it was received in and shipped out of the warehouse to order number 6054 on January 22, 1895.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 9,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Rare Winchester Model 1876 Special Order Deluxe .50 Express Rifle with Factory Letter

Lot # 1099 (Sale Order: 100 of 952)      

Rare Winchester Model 1876 Special Order Deluxe .50 Express Rifle with Factory Letter

Winchester Model 1876 Express Rifle with special order 22 inch octagon barrel, half magazine, pistol grip stock, shotgun buttplate and checkered fancy grain walnut stock and forearm. The rifle is accompanied by a factory letter that describes the rifle features and sates that it was shipped from the Winchester warehouse on November 9, 1880. The rifle has the Second Model receiver with screw fastened dust cover guide and dust cover with serrated edges. The barrel has a sporting style front sight with nickel-silver blade and a sporting style rear sight with serrated edges. The barrel, dust cover and loading gate are blue. The forearm cap, receiver, hammer, lever and shotgun buttplate are casehardened. The highly figured fancy grain walnut stock and forearm have fine checkered panels and a oiled piano finish. The pistol grip has an ebony insert. The top of the barrel is roll stamped "WINCHESTER'S-REPEATING ARMS. NEW HAVEN. CT./KING'S-IMPROVEMENT-PATENTED-MARCH 29.1866. OCTOBER 16. 1860." in two lines ahead of the rear sight. ".50 CAL" is stamped on the top of the barrel between the rear sight and the receiver. The dust cover is marked "WINCHESTER EXPRESS/.50 CAL. 95 GRS." in two lines. "50-95" is stamped on the bottom of the brass cartridge elevator. "MODEL 1876." is roll stamped on the upper receiver tang in fancy letters and the serial number "13074" is stamped in small numerals across the lower tang behind the lever latch. Winchester Model 1876 short rifles are scarce in all calibers and rare in 50-95 Express.

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25,000.00

You've been outbid  to onsite! to YOU!

Placing your bid. please wait...

Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 4 of 39

1.178.0.804.ccd3ec6.8.202