This 25.5MW ABB Steam Turbine Generator Plant was purchased in California-USA for a project in Honduras. Unfortunately, the project fell through so this wonderful system is being put on the market for sale for the owner. ***All engineering drawings available upon request. This lot is crated surplus ready for immediate shipment. Currently being stored securely in a warehouse in Armona, CA. A lot of spare equipment included as well. STEAM TURBINE GENERATOR, STEAM TURBINE AUXILIARIES, STEAM CIRCULATION EQUIPMENT

STEAM TURBINE
• ABB VAX MODEL HT 10 HIGH PRESSURE STEAM TURBINE, Inlet Pressure 1474 PSIA, Inlet Temperature 951°F, 231 klb/hr, Steam Extraction
• BHS MODEL TG 45 HIGH PRESSURE TURBINE GEARBOX, S/N 515837 (1988), Power 13700 kW, Speeds 11032 / 3600 RPM
• ABB VAX MODEL LT 10 LOW PRESSURE STEAM TURBINE, Steam Extraction
STEAM TURBINE AUXILIARIES
• STEAM TURBINE HYDRAULIC OIL SYSTEM, With (2) 10?HP Vickers Pumps, 48"x30"x24"H Holding Reservoir, (2) Replaceable Cartridge Canister Filters, Nitrogen Gas Cylinder, Auxiliary Water Cooled Heat Exchanger, Skid Frame Base
• STEAM TURBINE LUBE OIL SYSTEM, With (2) 20 HP AC & (1) 3?KW DC Pumps, 60"x72"x72"H Holding Reservoir, Auxiliary Water Cooled Heat Exchangers, Steel Skid Frame Base
• C.C. Jensen MODEL FINE FILTER LUBE OIL SYSTEM PURIFIER / FILTER 1 - KOCH ENGINEERING MODEL BDPRF MK111 LUBE OIL SYSTEM MIST ELIMINATOR, S/N 3177 (1995), Type 19x42, Material 304L, With Entex Fabrication Collector Hopper, Atmospheric Design Pressure, Ambient Design Temperature
GENERATOR
• ABB MODEL GTL 1050 EA SYNCHRONOUS GENERATOR, S/N 7253231, 31930 kVA x 0.85 (31.9 MVA), 3600 RPM, MCR 13110 14490V, ?
• SULZER BINGHAM MODEL 3 x 6 x 9 MSD-C BOILER FEEDWATER PUMPS, 14 Stage, 504 GPM, 4516 Head Ft., 3580 RPM, MagneTek Louis Allis Type WPIIX AC Motor, 800 HP, 4160 Volts, 3580 RPM, 7112CS Frame; Pump # 1 - Pump S/N IC945, Motor S/N 8-J44754001; Pump # 2 - Pump S/N IC942, Motor S/N 8J44754002
• EMERGENCY BOILER FEEDWATER PUMP
• WHEATLEY MODEL HP 100M EMERGENCY BOILER FEEDWATER PUMP, S/N 12370, Triplex Plunger Pump, Size 2" x 4-1/2" Stroke, 91 GPM @ 2100 PSI, MAWP 3180 PSI, Max. Speed 500 RPM, 100 HP, 230/460 Volts, 1175 RPM, 405T Frame
STEAM DRUM
• DYNA-THERM CORP. STEAM DRUM, S/N 583 (1989), Capacity 165,750 #/Hr @ 1577 PSIG, MAWP 1660 PSI @ 650°F, Test Pressure 2490 PSIG, Mat'l SA516?70, 54" Diameter x 30' 0" Length
BOILER FEEDWATER HEATERS
• SUTHERLAND INDUSTRIES HIGH PRESSURE BOILER FEEDWATER HEATER, S.W. No. NA, Shell: MAWP 480 PSIG @ 690°F Max. Temp., Tube: MAWP 2200 PSIG @ 475°F Max. Temp.
• SUTHERLAND INDUSTRIES HIGH PRESSURE BOILER FEEDWATER HEATER, S.W. No. NA, Shell: MAWP 480 PSIG @ 525°F Max. Temp., Tube: MAWP 2200 PSIG @ 475°F Max. Temp.
• SUTHERLAND INDUSTRIES LOW PRESSURE BOILER FEEDWATER HEATER, S/N 3?88?06?53644?1, Shell MAWP 50 & Vac PSIG @ 300°F Max Temp, Tube MAWP 240 PSIG @ 300°F Max Temp
STEAM SYSTEM AUXILIARIES
• R.A.S. FLASH TANK, W.P. Shell 50 PSI @ 400°F and FV, MDMT ?20°F @ 50 PSI, With (2) 1.5 HP Flash Tank Pumps 1 - BLOKSMA MODEL 320 GLAND STEAM CONDENSER, Shell: Design Pressure 1.0 barga, Test Pressure 1,5 barga, Design Temperature 216°C; Tubes: Design Pressure 16.6 barga, Test Pressure 25.0 barga, Design Temperature 100°C
• NASH KINEMA MODEL 1BEMB AIR EJECTOR PACKAGE, Design Pressure: Shell FV 100 PSI @ 620°F, Tubes 248 PSI @ 210°F; MDMT: Shell -20°F @ FV 100 PSI, Tubes -20°F @ 240 PSI
• PACIFIC PIPE CO. TURBINE AREA ATMOSPHERE DRAIN TANK, Nominal Capacity 600 Gallons, Atmospheric Design Pressure, Design Temperature 130°F, Material A36 Carbon Steel, Diameter 4' 6" x Height 5' 0", Insulated Jacket
• STEAM BLOW DOWN TANK
• TURBINE AREA MAIN SAMPLING STATION
• TURBINE / GENERATOR STEEL SUPERSTRUCTURE, With Structural Steel, Mezzanine Platform, Steam Piping, Valves

More Information can be provided if required by the customer. ...more