Meat Processing and Packaging Equipment Auction

Meat Processing and Packaging Equipment Auction

Auction closed.
Auction closed.
Meat Processing and Packaging Equipment Auction

Meat Processing and Packaging Equipment Auction

Auction closed.
Auction closed.
Internet Premium: 18%
Instant Financing | Low PaymentsSee Special Terms for additional fees

10 Minute Extended Bidding

Share:

Description

Meat Processing and Packaging Equipment Auction

Sigma Auction


(812) 308-6400
Need help with bidding? Get Help
Catalog Terms of sale
Search Catalog :
Sort By :
Go to Lot :
Go to Page :
Per Page :
Pg : 1 of 6

Closed Lots

Urschel Comitrol 1700 15 Horsepower Processor

Lot # 106      

Used Urschel Comitrol 1700 Centrifugal Slicer with:

  • Application: used to breakdown food products to create a multitude of products, such as: nut butters, pastes and extruded products, biscuits and cookies, nuts, fruit pulp, various spices, corn masa, hard cheeses, and a variety of gels, ointments, and creams
  • Maximum input product, in general, should not exceed 2.5 inches for 3 inch cutting heads, 3/8 inches to a slurry for microcut heads, and 1/4 to 1/2 inches in any dimension for slicing heads
  • Different product slicing dimensions may require OEM change parts
  • Currently fitted with a slicing head
  • 15 horsepower motor
  • Sealed enclosure
  • Continuous operation for uninterrupted production
  • Simplified design for easy cleaning and maintenance
  • Infeed height:  7 feet
  • Discharge height:  32 inches
  • Infeed dimensions:  9 inches wide x 3.75 inches tall
  • Stainless steel construction
Skidding, Rigging, and Loading Fee: $99.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 6,000.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

AC Horn Stainless Steel Frozen Block Cold Cluster Buster Blender with (2) 5 Hp Motors

Lot # 104      

Used AC Horn Stainless Steel Model Cold Blender with:

  • Stainless steel construction
  • Hopper dimensions:
    • 36 inches x 25 inches
  • Discharge chute:
    • 10 inches wide
    • 32 inches from ground
  • Dual shaft agitation
    • Driven by (2) 5 horsepower motors
  • Emergency E stop controller
  • Took 2000 pound blocks of frozen meat and broke them into manageable sizes
Skidding, Rigging, and Loading Fee: $391.70
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Urschel Comitrol 1700 Stainless Steel Processor with 30 Hp Motor

Lot # 114      

Used Urschel Commitrol Processor  with:

  • Cutting head: 2.5 inches
  • Slicing head: 0.375 inches
  • Reduction heads diameter: 6 inches
  • Product size:
    • Slicing Head:
      • Maximum: 0.060 inches
      • Minimum: 0.020 inches
    • Cutting Head:
      • Maximum: 1.5 inches
      • Minimum: 0.010 inches
  • Motor: 30 horsepower
  • Electrical requirements: 230/460 volts, 60 hertz, 3 phase

 

Skidding, Rigging, and Loading Fee: $265.40
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,700.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

MP Equipment MP-800 26" Stainless Steel Tomahawk Meat Patty Former

Lot # 103      

Used MP Equipment Patty Former with:

  • Production speed: 9,000 pounds per hour, depending on application
  • Capabilities up to 110 SPM
  • Stoke lengths:
    • 9 inches
    • 10 inches
    • 13 inches
  • Patty sizes:
    • Diameter: 4.5 inches
      • 8 ounces
    • Diameter: 2.4 inches
      • 1.6 ounces
    • Diameter: 1.5 inches
      • 0.6 ounces
    • Diameter: 0.6 inches
      • 0.09 ounces
  • Touchscreen with PLC controls
  • Standard Fill for ground or emulsified products
  • Vertical Fill for larger pieces and whole muscle
  • Portion Fill which is a variation of Vertical Fill
  • Soft Fill for ground product
  • Mounted on (4) stainless steel legs
  • Stainless steel construction
  • Electrical: 460 volts, 60 hertz, 3 phase
Skidding, Rigging, and Loading Fee: $360.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Hobart 1712 Table Top Automatic Meat Slicer

Lot # 141      

Used Hobart 1712 Table Top Automatic Meat Slicer with:

  • Anodized aluminum finish
  • Automatic, versatile, positive angle feed
  • Two (2) speed slicing
  • 1/3 horsepower motor
  • 11 inch blade diameter
  • Knife speed: 360 RPM
  • Electrical: 115 volts, 1 phase, 60 hertz, 4.4 amps

...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 500.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

IDD Process and Packaging 150ML Flash Pasteurizer

Lot # 148      

The IDD Process and Packaging 150ML Flash Pasteurizer is a compact and efficient solution for high-quality heat treatment of liquid products. Designed for small to medium-scale production, this pasteurizer swiftly heats and cools liquids to ensure safety and extend shelf life while preserving taste and nutritional value. Its user-friendly controls and precise temperature regulation make it ideal for applications in dairy, juice, and other beverage industries. With its reliable performance and consistent results, the IDD 150ML Flash Pasteurizer is an essential tool for maintaining product quality and safety in any production line.

Used IDD Process and Packaging 150ML Flash Pasteurizer with: 

  • Product out (pasteurized):
    • 790 gallons per hour
  • Steam (hot water set condensate return):
    • 99 pounds per hour
  • Glycol in: 1,110 gallons per hour
  • Glycol out: 1,110 gallons per hour
  • Overall dimensions:
    • Length: 111 inches
    • WIdth: 84 inches
    • Height: 96 inches
  • Electrical: 240/480 volts, 3 phase, 60 hertz
Skidding, Rigging, and Loading Fee: $286.40
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 35,500.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

AMFEC 510 6,000 Lbs. Dual Shaft Stainless Steel Paddle Blender

Lot # 152      

Used AMFEC Mixer with:

  • Capacity: 6000 pounds
  • Volume: 95 cubic feet
  • Quick release split shaft seals
  • Variable pitch paddle agitation
  • Sections: 2
  • Belt driven
  • Infeed: 105 inches
  • Overall dimensions:
    • Length: 72 inches
    • Width: 156 inches
    • Height: 41 inches
  • Stainless steel construction
  • Drive motor: 20 horsepower
  • Electrical: 3 Phase, 60 Hz, 220 Volts, 50 Amps
Skidding, Rigging, and Loading Fee: $611.90
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 3,500.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

BFB 3707 Automatic Shrink Bundler T32 Heat Tunnel

Lot # 187      

Used BFB 3707 Automatic Bundler:

  • Collator, shrink bander and shrink tunnel to tighten pack after banding
  • Fully Automatic 
  • Speeds up to 10 to 25 package per minute 
  • Maximum bundle size 13 inches length x 9 inches wide x 5 inches height
  • Minimum web width 2 inches 
  • Maximum web 18 inches 
  • 7.75 inches seal jaw opening 
  • 18 inches seal jaw with knife 
  • Festo pneumatic product push arm 
  • Product sensor 
  • Electric belt driven motor with gear box 
  • Heat shrink tunnel
  • Single chamber
  • Aperture is 32 inches length 20 inches wide x 10.5 inches tall
  • Metal mesh conveyor 50 inches length 19 inches width
  • Aanstecno .5 horsepower electric motor 
  • Variable conveyor speed
  • .25 horsepower electric air blower 
  • Conveyor 38 inches from ground 
Skidding, Rigging, and Loading Fee: $340.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 400.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Waldrop Company Stainless Two Lane Tub Overcapper

Lot # 194      

Used Waldrop Company Overcapper with:

  • Tub lid denester and overcapper
  • Two product lanes
  • Lane conveyor dimensions:  8 inches wide x 100 inches long
  • Conveyor height:  36.5 inches
  • Lugged plastic mat-top belts
  • Lug centers:  12 inches
  • Lid magazine dimensions:  48 inches long x 9 inches wide
  • Vacuum lid pick-off
  • Allen-Bradley PowerFlex 4M motor drives
  • .75 horsepower motor
  • Stainless steel construction
  • Sealed motor housing
Skidding, Rigging, and Loading Fee: $261.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Stainless Steel Steam Shrink Tunnel 24" W x 13" T

Lot # 195      

Used Steam Shrink Tunnel with:

  • Aperture dimensions:  24 inches wide x 13.5 inches tall
  • Tunnel length:  65.5 inches
  • Conveyor height:  40.5 inches
  • .5 horsepower conveyor motor
  • Waste water re-circulation pump
  • Boiler not included
  • Stainless steel construction
  • Screw down leveling feet
Skidding, Rigging, and Loading Fee: $168.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Ishida CCW-Z-214W-S/20-PP Stainless Steel Computer Combination Weigher

Lot # 198      

Used Ishida Computer Combination Weigher with:

  • Bucket volume: 1 liter
  • Dimpled stainless steel buckets
  • Overall dimensions:
    • Length: 45.5 inches
    • Width: 45.5 inches
    • Height: 45.5 inches
  • Electrical requirements:
    • Volts: 220
    • Frequency: 60 Hz
    • Phase 3
Skidding, Rigging, and Loading Fee: $176.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 85.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Cam AV Auto Vertical Hand Load Tuck Cartoner

Lot # 166      

Used Cam AV Automatic Vertical Cartoner with:

  • Minimum carton dimensions
    • Length: 1.37 inches
    • Width: .59 inch
    • Depth: .78 inch
  • Maximum carton dimensions
    • Length: 7.87 inches
    • Width: 2.95 inches
    • Depth: 4.52 inches
  • Intermittent motion
  • Speeds: up to 55 cartons per minute, depending on materials and application
  • Centers: 7 inches
  • Magazine length: 30"
  • Electrics:
    • Phase: 3
    • Frequency: 60 Hz
    • Volts: 220
  • Reverse tuck
Skidding, Rigging, and Loading Fee: $507.50
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 1,500.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

A-One CDL-600-90-S Stainless Steel Tote Dumper

Lot # 215      

Used A-One Tote Dumpers with: 

  • Lifting capacity: 600 pounds
  • Tote type: standard 600 pound v-mag cart
    • Approximate cart dimensions:
      • Length: 25 inches
      • Width: 24 inches
  • Degree of dump: 35 with a standard v-mag cart
  • Approximate dump height: 86 inches
  • Chain driven lift
  • Column thickness: 3/16 inch
  • Floor level loading 
  • Stainless steel construction 
  • Electrical: 208 volts, 3 phase
Skidding, Rigging, and Loading Fee: $298.10
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 5,000.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Feldmeier 650 Gallon (80 Cubic Feet) Jacketed Stainless Steel Horizontal Paddle Mixer

Lot # 158      

Used Feldmeier Jacketed Stainless Steel Horizontal Paddle Mixer with:

  • Capacity:
    • Gallons: 650
    • Cubic feet: 80 (approximately) , depending on product  
  • Maximum allowable working pressure 150 PSI at 350 F
  • Minimum allowed woking temperature -20 F at 150 PSI
  • Tank dimensions:
    • Length: 47 inches
    • Width: 77 inches
    • Depth: 47 inches 
  • (2) Hinged lids that can be opened as one  
  • Paddle dimensions:
    • Top:
      • Length: 22 inches 
      • Width: 18 inches wide
    • Bottom:
      • Length: 11 inches
      • Width: 9 inches
  • Super E Baldor motor: 5 horsepower
  • Electrical: 230/460 volts, 3 phase, 60 hertz, 13/6.5 amps

Last application: chili 

Skidding, Rigging, and Loading Fee: $401.60
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 4,200.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

CDA 40 Inch Rotary Accumulation Table

Lot # 225      

Used CDA Rotary Acummulation Table with:

  • Table diameter: approximately 36 inches
  • Stainless steel construction
  • Emergency stop
  • Threaded adjustable height legs
Skidding, Rigging, and Loading Fee: $98.30
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 50.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Cleated Incline Conveyor 8" Wide x 72" Discharge

Lot # 227      

Used Cleated Incline Conveyor with:

  • Conveyor width: 8 inches
  • Discharge height: 71.5 inches
  • Hopper height: 37 inches
  • Variable frequency drive
  • Painted steel construction
Skidding, Rigging, and Loading Fee: $216.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Skid Of Chicken Trimming Equipment

Lot # 242      

Skid of Chicken Trimming Equipment:

  • (2) 0.5 horsepower motors
  • Triming equipment
  • Power pack
Skidding, Rigging, and Loading Fee: $90.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 25.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

EMI RMSC-24-7-20 Cleated Incline Conveyor

Lot # 237      

Used EMI RMSC-24-7-20 Cleated Incline Conveyor with:

  • Conveyor width: 23.25 inches
  • Cleat centers: 8 inches
  • Scoop cleats
  • Cleat height: 2.5 inches
  • Overall height: 95 inches
  • Discharge height: 59.25
  • Painted steel construction
  • In feed height: 48 inches
  • Hopper size: 48" x 56" x 38" deep
Skidding, Rigging, and Loading Fee: $240.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

Sold for: USD 40.00

You've been outbid  to offsiteBidder! to YOU!

Placing your bid. please wait...

Wolfking EP 225-HD Emulsifier Auger Needed

Lot # 101      

Used WolfKing Emulsifier with:

  • Auger Needed
  • Approximate outfeed diameter: 4 inches
Skidding, Rigging, and Loading Fee: $292.70
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Urschel Comitrol Processor 1700 Slicer, 30 Hp

Lot # 102      

Used Urschel Slicer with:

  • Cutting head: 2.5 inches
  • Slicing head: 0.375 inches
  • Reduction heads diameter: 6 inches
  • Product size:
    • Slicing Head:
      • Maximum: 0.060 inches
      • Minimum: 0.020 inches
    • Cutting Head:
      • Maximum: 1.5 inches
      • Minimum: 0.010 inches
  • Motor: 30 horsepower
  • Electrical requirements: 230/460 volts, 60 hertz, 3 phase
Skidding, Rigging, and Loading Fee: $110.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

JBT 610-10 Steritort Lab Pressure Retort Sterilizer

Lot # 100      

Used JBT Laboratory Pressure Sterilizer with:

  • Designed for pilot research and development projects by enabling processors to design thermal processes by replicating the effect of time and temperature variables on canned food products
  • Test results will indicate how a product will behave in production sterilizer machines such as rotary pressure, rotary atmospheric, hydrostatic or orbital rotary pressure. 
  • 60 inch diameter pressure vessel 
  • Wahl Digi-Stem DST600 Thermometer
  • Allen-Bradley PanelView Plus 1250
  • ABB Commander 1900 circular chart recorder
  • Hydraulic locking door 
    • Door opening width and length: 59 inches 
  • Opening cavity: 29 inches deep. 
  • Allen-Bradley plc based controls 
    • Operating speed: 1.5 - 14 rpm 
  • Sew-Eurodrive motor:
    • 2 horsepower
    • 575 Volts   3 Phase   60 Hertz 
  • Pressure vessel certified by Melco Steel, Inc
    • MFG Serial No: 3972
      • C.A. o.o63 IN.
    • Maximum working pressure:
      •  60 PSI at 305 degrees Fahrenheit
    • Minimum designate metal temperature: 
      • -4 degrees Fahrenheit at 60 PSI
    • Shell thickness: 
      • Hub: 1.25 inches
    • Head thickness: 
      • .44 inch
Skidding, Rigging, and Loading Fee: $522.70
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

APV Gaulin 5-5.0BX Stainless Steel Homogenizer Emulsifier

Lot # 105      

Used APV Gaulin5-5.0BX Homogenizer Emulsifier with:

  • Capacity:  up to 400 liters per hour, depending on application
  • Motor power:  5.5 kilowatts
  • Max pressure:  350 bar
  • Machine weight:  400 kilograms
  • Stainless steel
Skidding, Rigging, and Loading Fee: $96.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Urschel Comitrol 3600 Stainless Steel Regrinder

Lot # 108      

Used Urschel Comitrol 3600 Regrinder with:

  • Continuous operation
  • Capabilities:
    • Flaking
    • Chopping
    • Granulating
    • Pureeing
  • Powered screw infeed
  • Impeller speed: 3600 rotations per minute
  • Analog controls
  • Mounted on casters
  • Stainless steel construction
  • Feed motor: 1 horsepower
  • Drive motor: 10 horsepower
  • Electrical: 3 Phase, 208 volts, 30 amps
Skidding, Rigging, and Loading Fee: $180.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid  to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

NuTEC 760 Stainless Steel Hydraulic Patty Former W/ Lift

Lot # 109      

Used NuTEC Patty Former with:

  • Production speed: 25,200 patties per hour depending on application
  • Variable speed: 15 to 80 strokes per minute
  • Product mold plate dimensions:
    • Thickness: up to 1.25 inches
    • Useable width: 26 inches
  • Hopper capacity: 600 pounds
    • up to 5500 pounds per hour 
  • Tote lift system for product infeed
  • Product applications:
    • Beef
    • Seafood
    • Pork
    • Cheese
    • Vegetables
  • Touch screen controls 
  • Mounted on (4) stainless steel legs
  • Stainless steel construction
  • Electrical: 460 volts, 60 hertz, 32 watts, 62 amps, 3 phase
  • Previous application: specialty dog food treats 
Skidding, Rigging, and Loading Fee: $360.00
...more

Bid Not Accepted!

Bid Accepted!

You've been outbid!

PASSED

You've been outbid ! to YOU!

This lot was not sold.

Placing your bid. please wait...

Reserve Not Met

Blentech SS Agitated Auger Feeder

Lot # 111      

Blentech SS Agitated Auger Feeder with:

  • Stainless steel construction
  • Blender capacity:
    • 1500 gallons 
  • Outfeed
    • 1 outfeed shaft
    • Located bottom center
    • Outfeed diameter: 32.5 inches
    Skidding, Rigging, and Loading Fee: $506.30
    ...more

    Bid Not Accepted!

    Bid Accepted!

    You've been outbid!

    PASSED

    You've been outbid  to YOU!

    This lot was not sold.

    Placing your bid. please wait...

    Reserve Not Met
    Search Catalog :
    Sort By :
    Go to Lot :
    Go to Page :
    Per Page :
    Pg : 1 of 6

    1.178.0.1875.f3727f4.23.121