Medical Equipment Auction

Auction closed.

Medical Equipment Auction

Auction closed.

Internet Premium: 5%
See Special Terms for additional fees

Kidderminster, Worcestershire

Description

A wide variety of pre-owned quality medical equipment from across the NHS and private sector.

Avensys UK Resale

01562 741888

Internet Premium: 5%
Value Added Tax : 20% - Sales tax applied to Hammer Price.
Payment Options: Wire Transfer
Payment Instructions: Payments are due directly to Avensys UK Resale after close of the event. Sales may be vetted to verify medical profession, for full details on payments, please see below. 10. PRICE AND PAYMENT 10.1 The price of the Goods and/or the Services will be set out in Our price list in force at the time you place your Order or in any quotation or invitation to treat we issue to you. Our prices may change at any time, but price changes will not affect Orders that you have already placed. 10.2 Our prices are exclusive of VAT which will be charged at the rate applicable from time to time. 10.3 The prices for the Goods exclude delivery costs, which will be added to the total amount due. 5 10.4 Where We are providing Goods to you, you must make payment for Goods in advance by credit or debit card. 10.5 If you do not make any payment due to Us by the due date for payment, We may charge interest to you on the overdue amount at the rate of 3% a year above the base lending rate of Bank of England from time to time. This interest shall accrue on a daily basis from the due date until the date of actual payment of the overdue amount, whether before or after judgment. You must pay Us interest together with any overdue amount. 10.6 However, if you dispute an invoice in good faith and contact Us to let Us know promptly after you have received an invoice that you dispute it, clause 10.5 will not apply for the period of the dispute. The Customer's attention is particularly drawn to the provisions of clause 12. 4. DELIVERY OF GOODS DELIVERY WITHIN THE UNITED KINGDOM (UK) 4.1 The Supplier shall deliver the Goods to the location set out in the Order or such other location as the parties may agree (Delivery Location) (provided this is also in the UK) at any time after the Supplier notifies the Customer that the Goods are ready. 4.2 Delivery of the Goods shall be completed on the Goods arrival at the Delivery Location. 4.3 Any dates quoted for delivery of the Goods are approximate only, and the time of delivery is not of the essence. The Supplier shall not be liable for any delay in delivery of the Goods that is caused by a Force Majeure Event or the Customer's 4 failure to provide the Supplier with adequate delivery instructions or any other instructions that are relevant to the supply of the Goods. 4.4 If the Supplier fails to deliver the Goods, its liability shall be limited to the costs and expenses incurred by the Customer in obtaining replacement goods of similar description and quality in the cheapest market available, less the price of the Goods. The Supplier shall have no liability for any failure to deliver the Goods to the extent that such failure is caused by a Force Majeure Event the Customer's failure to provide the Supplier with adequate delivery instructions for the Goods or any relevant instruction related to the supply of the Goods. 4.5 If the Customer fails to accept or take delivery of the Goods within 3 Business Days of the Supplier notifying the Customer that the Goods are ready, then except where such failure or delay is caused by a Force Majeure Event or by the Supplier's failure to comply with its obligations under the Contract in respect of the Goods: (a) delivery of the Goods shall be deemed to have been completed at 9.00 am on the fourth Business Day following the day on which the Supplier notified the Customer that the Goods were ready; and (b) the Supplier shall store the Goods until delivery takes place, and charge the Customer for all related costs and expenses (including insurance). 4.6 If five Business Days after the Supplier notified the Customer that the Goods were ready for delivery the Customer has not taken or accepted delivery of them, the Supplier may resell or otherwise dispose of part or all of the Goods. 4.7 The Supplier may deliver the Goods by instalments, which shall be invoiced and paid for separately. Each instalment shall constitute a separate contract. Any delay in delivery or defect in an instalment shall not entitle the Customer to cancel any other instalment. DELIVERY OUTSIDE OF THE UK 4.8 Delivery of the Goods shall take place at the Delivery Point. Acceptance of any change to the Delivery Point requested by the Customer shall be at the Supplier's sole discretion and the Customer shall be liable for any additional expenses incurred by the Supplier as a result of such change. The Supplier shall arrange for suitable transport to the Delivery Point. On delivery, the Supplier (or its appointed carrier) shall provide the Customer with such export documents as are necessary together with a delivery note. 4.9 Delivery of the Goods shall be completed on the Goods arrival at the Delivery Point. 5 4.10 Delivery or performance dates in relation to the supply by the Supplier of the Goods are approximate only and, unless otherwise expressly stated, time is not of the essence for delivery of the Goods. 4.11 The Supplier may effect delivery in one or more instalments. 4.12 Save where the Supplier has agreed to provide them, the Customer is responsible for obtaining, at its own cost, such import licences and other consents in relation to the Goods as are required from time to time and, if required by the Supplier, the Customer shall make those licences and consents available to the Supplier prior to the relevant shipment.
Currency Type: GBP
Shipping Instructions: For Shipping information; See Payment Instructions under "Delivery of Goods" section 4
Preview Date & Times: Please contact the auction company for preview dates & times.
Checkout Date & Times: Please contact the auction company for checkout dates & times.
Location: Frederick Road, Hoo Farm Industrial Estate, Kidder, Kidderminster, Worcestershire DY11 7RA, United Kingdom
Driving Directions:

Special Terms

2. OUR CONTRACT WITH YOU 2.1 These are the terms and conditions on which We supply Goods, or Services, or both Goods and Services, to you. 2.2 Please ensure that you read these Terms carefully, and check that the details on the Order and these Terms are complete and accurate, before you sign and submit the Order. If you think that there is a mistake or require any changes, please contact Us to discuss. 2.3 When you sign and submit the Order to Us, this does not mean We have accepted your order for Goods and/or Services. Our acceptance of the Order will take place as described in clause 2.4. If We are unable to supply you with the Goods and/or Services, We will inform you of this and We will not process the Order. 2.4 These Terms will become binding on you and Us when We contact you to tell you that We are able to provide you with the Services or the Goods, at which point a contract will come into existence between you and Us. 2.5 We shall assign an order number to the Order and inform you of it when We confirm the Order. Please quote the order number in all subsequent correspondence with Us relating to the Order. 2 2.6 Our website, catalogue and brochure are solely for the promotion of Our Goods in the UK. 3. CHANGES TO ORDER OR TERMS 3.1 We may revise these Terms from time to time to reflect changes in relevant laws and regulatory requirements. 3.2 If We have to revise these Terms under clause 3.1, We will give you at least one month's written notice of any changes to these Terms before they take effect. You can choose to cancel the contract in accordance with clause 13.4(c). 3.3 You may make a change to the Order for Goods and/or Services at any time before We despatch the Goods or the start date for the Services by contacting Us, except in the case of bespoke Goods. Where this means a change in the total price of the Goods and/or Services, We will notify you of the amended price in writing. You can choose to cancel the Order in accordance with clause 13 in these circumstances. 3.4 If you wish to cancel an Order before it has been fulfilled, please see your right to do so in clause 13. In the case of bespoke Goods, unfortunately, because We make these Goods to your specific requirements, you will not be able to cancel an Order once it is made. 5. IF THE GOODS ARE FAULTY As a consumer, you have legal rights in relation to Goods that are faulty or not as described. We are under a legal duty to supply Goods that are in conformity with this contract. Advice about your legal rights is available from your local Citizens' Advice Bureau or Trading Standards office. Nothing in these Terms will affect these legal rights. 6. THIRD-PARTY MANUFACTURER'S GUARANTEE OF GOODS 6.1 Where the Goods come with a manufacturer's guarantee, please refer to the manufacturer's guarantee provided with the Goods. 6.2 This guarantee is in addition to, and does not affect, your legal rights in relation to the Goods that are faulty or not as described. We are under a legal duty to supply Goods that are in conformity with this contract. Advice about your legal rights is available from your local Citizens' Advice Bureau or Trading Standards office. 7. SELLER'S GUARANTEE OF GOODS 7.1 You acknowledge and accept that unless we expressly state that the Goods being supplied are new, the Goods will be reconditioned by us. 7.2 We guarantee that on delivery and for a period of three months from delivery, the Goods shall be free from material defects. However, this guarantee does not apply in the circumstances described in clause 7.3. 7.3 This guarantee does not apply to any defect in the Goods arising from: (a) fair wear and tear; (b) wilful damage, abnormal storage or working conditions, accident, negligence by you or by any third party; (c) if you fail to operate or use the Goods in accordance with the user instructions; (d) any alteration or repair by you or by a third party who is not one of Our authorised repairers; and (e) any specification provided by you. 7.4 This guarantee is in addition to, and does not affect, your legal rights in relation to the Goods that are faulty or not as described. We are under a legal duty to supply Goods that are in conformity with this contract. Advice about your legal rights is available from your local Citizens' Advice Bureau or Trading Standards office. 4 8. PROVIDING SERVICES 8.1 We will supply the Services to you from the date set out in the Order or such other date agreed between Us in writing for the period set out in the Order. 8.2 We will make every effort to complete the Services on time. However, there may be delays due to an Event Outside Our Control. See clause 12 for Our responsibilities when an Event Outside Our Control happens. 8.3 If you do not pay Us for the Services when you are supposed to as set out in clause 10.4, We may suspend the Services with immediate effect until you have paid Us the outstanding amounts (except where you dispute an invoice under clause 10.6). We will contact you to tell you this. This does not affect Our right to charge you interest under clause 10.5. 9. IF THERE IS A PROBLEM WITH THE SERVICES 9.1 In the unlikely event that there is any defect with the Services or Goods: (a) please contact Us and tell Us as soon as reasonably possible; (b) please give Us a reasonable opportunity to repair or fix any defect; and (c) We will use every effort to repair or fix the defect as soon as reasonably practicable . 9.2 As a consumer, you have legal rights in relation to Services not carried out with reasonable skill and care, or if the materials We use are faulty or not as described. Advice about your legal rights is available from your local Citizens' Advice Bureau or Trading Standards office. Nothing in these Terms will affect these legal rights. 11. OUR LIABILITY TO YOU 11.1 If We fail to comply with these Terms, We are responsible for loss or damage you suffer that is a foreseeable result of Our breach of the Terms or Our negligence, but We are not responsible for any loss or damage that is not foreseeable. Loss or damage is foreseeable if it is an obvious consequence of Our breach or if it was contemplated by you and Us at the time we entered into this contract. 11.2 If We are installing the Goods and/or providing Services in your property, We will make good any damage to your property caused by Us in the course of installation or performance. However, We are not responsible for the cost of repairing any pre-existing faults or damage to your property that We discover in the course of installation and/or performance by Us. 11.3 We only supply the Goods and/or Services for domestic and private use. You agree not to use the Goods and/or Services for any commercial, business or re-sale purpose, and We have no liability to you for any loss of profit, loss of business, business interruption, or loss of business opportunity. If you intend to use the Goods and Services for commercial, business or re-sale purposes, you these terms shall not apply and our commercial / business terms and conditions will take effect without further notice to you. 11.4 We do not exclude or limit in any way Our liability for: (a) death or personal injury caused by Our negligence or the negligence of Our employees, agents or subcontractors; (b) fraud or fraudulent misrepresentation; (c) for breach of your legal rights in relation to the products including the right to receive products which are: as described and match information we provided to you and any sample or model seen or examined by you; of 6 satisfactory quality; fit for purpose and any particular purpose made known to us; supplied with reasonable skill and care and, where installed by us, correctly installed; and (d) defective products under the Consumer Protection Act 1987. 12. EVENTS OUTSIDE OUR CONTROL 12.1 We will not be liable or responsible for any failure to perform, or delay in performance of, any of Our obligations under these Terms that is caused by an Event Outside Our Control. 12.2 An Event Outside Our Control means any act or event beyond Our reasonable control, including without limitation strikes, lock-outs or other industrial action by third parties, civil commotion, riot, invasion, terrorist attack or threat of terrorist attack, war (whether declared or not) or threat or preparation for war, fire, explosion, storm, flood, earthquake, subsidence, epidemic or other natural disaster, or failure of public or private telecommunications networks. 12.3 If an Event Outside Our Control takes place that affects the performance of Our obligations under these Terms: (a) We will contact you as soon as reasonably possible to notify you; and (b) Our obligations under these Terms will be suspended and the time for performance of Our obligations will be extended for the duration of the Event Outside Our Control. Where the Event Outside Our Control affects Our delivery of Goods to you, We will arrange a new delivery date with you after the Event Outside Our Control is over. Where the Event Outside Our Control affects Our performance of Services to you, We will restart the Services as soon as reasonably possible after the Event Outside Our Control is over. 12.4 You may cancel the contract if an Event Outside Our Control takes place and you no longer wish Us to provide the Goods and/or Services. Please see your cancellation rights under clause 13. We will only cancel the contract if the Event Outside Our Control continues for longer than 26 weeks in accordance with Our cancellation rights in clause 13. 13. YOUR RIGHTS TO CANCEL AND APPLICABLE REFUND 13.1 Before We begin to provide the Services or the Goods are delivered, you have the following rights to cancel an Order for Goods (other than bespoke Goods) and/or Services, including where you choose to cancel because We are affected by an Event Outside Our Control or We change these Terms under clause 3.1 to your material disadvantage: 7 (a) you may cancel any Order for Goods and/or Services at any time before We despatch the Goods or the start date for the Services within 14 calendar days of placing an Order by contacting Us. We will confirm your cancellation in writing to you; (b) if you cancel an Order under clause 13.1(a) and you have made any payment in advance for Services that have not been provided to you, or Goods that have not been delivered to you, We will refund these amounts and any delivery charges to you; (c) however, if you cancel an Order for Services under clause 13.1(a) and We have already started work on your Order by that time, you will pay Us any costs We reasonably incurred in starting to fulfil the Order, and this charge will be deducted from any refund that is due to you or, if no refund is due to you, invoiced to you. We will tell you what these costs are when you contact Us. However, where you have cancelled an Order because of Our failure to comply with these Terms (except where We have been affected by an Event Outside Our Control), you do not have to make any payment to Us; (d) unfortunately, if you cancel an Order for Goods under clause 13.1(a) and We have already despatched your Goods to you, We will not be able to cancel your Order until it is delivered or collected. In this case, if you return the Goods to Us, We will have to charge you the cost of collection or you will have to pay the cost of returning the Goods back to Us. This will not affect your refund for the Goods themselves, but we will not refund any charges for delivery and any charge for collection will be deducted from the refund that is due to you. 13.2 Unfortunately, as bespoke Goods are made to your requirements, you will not be able to cancel your Order once made (but this will not affect your legal rights as a consumer in relation to made-to-measure Goods that are faulty or not as described). 13.3 Once We have begun to provide the Services to you, you may cancel the contract for the Services at any time by providing Us with at least 30 calendar days' notice in writing. Any advance payment you have made for Services that have not been provided will be refunded to you. 13.4 Once We have begun to provide the Services to you, you may cancel the contract for Services with immediate effect by giving Us written notice if: (a) We break this contract in any material way and We do not correct or fix the situation within 30 days of you asking Us to in writing; (b) We go into liquidation or a receiver or an administrator is appointed over Our assets; (c) We change these Terms under clause 3.1 to your material disadvantage; 8 (d) We are affected by an Event Outside Our Control. 14. OUR RIGHTS TO CANCEL AND APPLICABLE REFUND 14.1 We may have to cancel an Order before the start date for the Services or before the Goods are delivered, due to an Event Outside Our Control or the unavailability of stock or (in the case of Services) key personnel or key materials without which We cannot provide the Services. If this happens: (a) We will promptly contact you to let you know; (b) if you have made any payment in advance for Services that have not been provided to you, or Goods that have not been delivered to you, We will refund these amounts to you; (c) where We have already started work on your Order for Services or made-to-measure Goods , We will not charge you anything and you will not have to make any payment to Us. 14.2 Once We have begun to provide the Services to you, We may cancel the contract for the Services at any time by providing you with at least 30 calendar days' notice in writing. If you have made any payment in advance for Services that have not been provided to you, We will refund these amounts to you. 14.3 We may cancel the contract for Services at any time with immediate effect by giving you written notice if: (a) you do not pay Us when you are supposed to as set out in clause 10.4. This does not affect Our right to charge you interest under clause 10.5; or (b) you break the contract in any other material way and you do not correct or fix the situation within 7 days of Us asking you to in writing. 15. INFORMATION ABOUT US AND HOW TO CONTACT US 15.1 We are a company registered in England and Wales. Our company registration number is 09870525 and Our registered office is at Hunt House Farm, Frith Common, Nr Tenbury Wells, Worcestershire, United Kingdom, WR15 8JY. Our trading address is Frederick Road, Hoo Farm Industrial Estate, Kidderminster, DY11 7RA. 15.2 If you have any questions or if you have any complaints, please contact Us. You can contact Us by telephoning or by e-mailing Our customer service team. Full details can be found on our website. 15.3 If you wish to contact Us in writing, or if any clause in these Terms requires you to give Us notice in writing (for example, to cancel the contract for services which We have started to provide), you can send this to Us by e-mail, by hand, or by pre-paid 9 post to Frederick Road,Hoo Farm Industrial Estate, Kidderminster DY11 7RA. We will confirm receipt of this by contacting you in writing. If We have to contact you or give you notice in writing, We will do so by e-mail, by hand, or by pre-paid post to the address you provide to Us in the Order. 16. HOW WE MAY USE YOUR PERSONAL INFORMATION 16.1 We will use the personal information you provide to Us to: (a) provide the Goods and/or Services; (b) process your payment for such Goods and/or Services; and (c) inform you about similar products or services that We provide, but you may stop receiving these at any time by contacting Us. 16.2 You agree that We may pass your personal information to credit reference agencies and that they may keep a record of any search that they do. 16.3 We will not give your personal data to any other third party. 17. OTHER IMPORTANT TERMS 17.1 We may transfer Our rights and obligations under these Terms to another organisation, and We will always notify you in writing if this happens, but this will not affect your rights or Our obligations under these Terms. 17.2 You may only transfer your rights or your obligations under these Terms to another person if We agree in writing. 17.3 This contract is between you and Us. No other person shall have any rights to enforce any of its terms. However, the purchaser of your property will have the benefit of the guarantee at clause 6.1 if you transfer it to them, but We and you will not need their consent to cancel or make any changes to these Terms. 17.4 Each of the paragraphs of these Terms operates separately. If any court or relevant authority decides that any of them are unlawful, the remaining paragraphs will remain in full force and effect. 17.5 If We fail to insist that you perform any of your obligations under these Terms, or if We do not enforce Our rights against you, or if We delay in doing so, that will not mean that We have waived Our rights against you and will not mean that you do not have to comply with those obligations. If We do waive a default by you, We will only do so in writing, and that will not mean that We will automatically waive any later default by you. 10 17.6 These Terms are governed by English law. You and We both agree to submit to the non-exclusive jurisdiction of the English courts. However, if you are a resident of Northern Ireland you may also bring proceedings in Northern Ireland, and if you are a resident of Scotland, you may also bring proceedings in Scotland.

Search Catalog :

Sort By :

Go to Lot :

Go to Page :

Per Page :

Pg : 1 of 6

Closed Lots

Eschmann Little Sister Autoclave SES113B Vacuum

Lot # 107092

Manufacturer: EschmannModel: SES113BYear: 2011Item Location - Country: United Kingdom

Pre-owned Eschmann Little Sister SES113B Vacuum Autoclave, with printer Manufactured in 2011, fully functional

Labcaire Autoscope Guardian G2 Endoscope Processor

Lot # 30710

Manufacturer: LabcaireModel: Guardian G2Item Location - Country: United Kingdom

Pre-owned Labcaire Guardian G2 Endoscope Processor. Sold with EST and function test, excluding warranty.

Arthrex AR-6450 Arthroscopy Pump

Lot # A5367

Manufacturer: ArthrexModel: AR-6450Condition: UsedItem Location - Country: United Kingdom

The Arthrex Continuous Wave II Arthroscopy Pump AR-6450 is a safe, reliable, user-friendly system which maintains constant, non-pulsed control of intra-articular rinsing and distension pressure throughout all phases of an arthroscopic surgical procedure.

The integrated pressure sensor can be directly connected to the inflow cannulas for direct pressure measurement. There is no need for complex secondary measuring systems or extra venous access. The continuous pulse-free flow reacts immediately to changes in the intra-articular pressure so that joint distension can be sustained even under high shaver extraction volumes or secondary outflow.

The nominal values for flow and pressure are adjusted at the control unit keyboard or by using the remote control. The unit has two different tubes (a. roll pump tube, b. patient tubing), so that the roll pump tubing can be economically used for an entire day of surgery WARNING The patient tubing must be replaced before each new surgical procedure.

The control unit is designed for continuous operation. The system is protected by a resetting thermo fuse. In the event of a fault, e.g. excess current, the fuse heats up suddenly and the device switches off. As soon as the thermoelement cools down, the fuse resets automatically in about 30 seconds. The device can be switched on and started again.

Arthrex AR-6450 Arthroscopy Pump

Lot # A5367a

Manufacturer: ArthrexModel: AR-6450Condition: UsedItem Location - Country: United Kingdom

Megadyne Mega Vac Plus Smoke Evacuator

Lot # 18682

Manufacturer: MegadyneModel: Mega Vac PlusItem Location - Country: United Kingdom

"Make Your O.R. a Smoke-Free Zone"

Research studies confirm electrosurgical smoke plume is hazardous to health care personnel and surgeons. Protecting your O.R. from these hazards is easy, quiet, and comfortable with the Mega Vac Smoke Evacuation System.

The MEGA VAC Plus Smoke Evacuator provides surgeons with a quiet, comfortable smoke evacuation tool with adjustable flow rates, evacuation times and a patented internal valve to prevent backflow.

Did You Know...

Studies show that inhaling the smoke plume created by burning just one gram of tissue (using electrosurgery) is equivalent to smoking 6 unfiltered cigarettes?1

Harmful Surgical Smoke Plume

AORN's Recommended Practices2 State:

''Smoke plume should be removed by use of a Smoke Evacuation System''

''Experts have noted that there may be more than 600 chemical compounds that exist in surgical smoke.''

''...these contaminants have been shown to have mutagenic and carcinogenic potential.''

Anetic Aid AET 40050 Electronic Tourniquet

Lot # 3156

Manufacturer: Anetic AidModel: AET 40050Year: 2006Condition: Very GoodItem Location - Country: United Kingdom

Supplied on mobile stand with storage facilities. Excluding cuffs and cables. Manufacture Date: September, 2006.

These units are in very good condition and, owing to being managed by Avensys since manufacture, have a guarantee of engineering history and through life maintenance.

"User friendly, easy to clean with low maintenance costs, the AET will be deemed ideal for use in A & E and Pain Relief Clinics"

Features of the Anetic Aid Electronic Tourniquet:

- Touch screen technology

- Integral power supply

- Independently operated single or dual channel option colour coded

- Leak compensation facility

- Automatic self test routines

- Automatic timers

- Screen safety lock

- Audible alarms

- Patient data memory store

- User friendly and simple to use controls

Edwards Lifesciences Aquarius Haemofiltration Machine

Lot # 2784

Manufacturer: Edwards LifesciencesModel: AquariusYear: 2009Condition: ExcellentItem Location - Country: United Kingdom

Pre-owned Edwards Lifesciences Aquarius Haemofiltration Machine, manufactured in 2009 and in excellent condition.

Manuals and service history available upon request.

The Aquarius is an acute blood purification system which is easily manoeuvrable on its castors. In addition, the unit has been upgraded to include Total Fluid Loss Management (version 6.02.07).

For further information please view the manufacturer brochure: http://ht.edwards.com/resourcegallery/eu/hemofiltr...

Edwards Lifesciences Aquarius Haemofiltration Machine

Lot # 2785

Manufacturer: Edwards LifesciencesModel: AquariusYear: 2009Item Location - Country: United Kingdom

Pre-owned Edwards Lifesciences Aquarius Haemofiltration Machine, manufactured in 2009 and in excellent condition. Unit functional but requires calibration before use. Manuals and service history available upon request.

The Aquarius is an acute blood purification system which is easily manoeuvrable on its castors. In addition, the unit has been upgraded to include Total Fluid Loss Management (version 6.02.07).

For further information please view the manufacturer brochure: http://ht.edwards.com/resourcegallery/eu/hemofiltr...

Edwards Lifesciences Aquarius Haemofiltration Machine

Lot # 2786

Manufacturer: Edwards LifesciencesModel: AquariusYear: 2009Item Location - Country: United Kingdom

The Aquarius is an acute blood purification system which is easily manoeuvrable on its castors. In addition, the unit has been upgraded to include Total Fluid Loss Management (version 6.02.07).

For further information please view the manufacturer brochure: http://ht.edwards.com/resourcegallery/eu/hemofiltr...

Edwards Lifesciences Aquarius Haemofiltration Machine

Lot # 2787

Manufacturer: Edwards LifesciencesModel: AquariusYear: 2009Item Location - Country: United Kingdom

Pre-owned Edwards Lifesciences Aquarius Haemofiltration Machine, manufactured in 2009 and in excellent condition.

Manuals and service history available upon request.

The Aquarius is an acute blood purification system which is easily manoeuvrable on its castors. In addition, the unit has been upgraded to include Total Fluid Loss Management (version 6.02.07).

For further information please view the manufacturer brochure: http://ht.edwards.com/resourcegallery/eu/hemofiltr...

Edwards Lifesciences Aquarius Haemofiltration Machine

Lot # 2788

Manufacturer: Edwards LifesciencesModel: AquariusYear: 2009Item Location - Country: United Kingdom

The Aquarius is an acute blood purification system which is easily manoeuvrable on its castors. In addition, the unit has been upgraded to include Total Fluid Loss Management (version 6.02.07).

For further information please view the manufacturer brochure: http://ht.edwards.com/resourcegallery/eu/hemofiltr...

Edwards Lifesciences Aquarius Haemofiltration Machine

Lot # 2789

Manufacturer: Edwards LifesciencesModel: AquariusYear: 2009Item Location - Country: United Kingdom

Pre-owned Edwards Lifesciences Aquarius Haemofiltration Machine, manufactured in 2009 and in excellent condition.

Manuals and service history available upon request.

The Aquarius is an acute blood purification system which is easily manoeuvrable on its castors. In addition, the unit has been upgraded to include Total Fluid Loss Management (version 6.02.07).

For further information please view the manufacturer brochure: http://ht.edwards.com/resourcegallery/eu/hemofiltr...

Zeiss SZP 350 Chart Projector

Lot # 3579

Manufacturer: ZeissModel: SZP 350Condition: ExcellentItem Location - Country: United Kingdom

Zeiss SZP 350 Chart Projector supplied with a white mounting shelf and in excellent condition.

The SZP 350 Chart Projector provides a vast range of test charts including special charts as well as overlay and masking functions.

Select charts directly or start programmed chart sequences via the infrared remote control.

Zeiss SZP 350 Chart Projector

Lot # 3580

Manufacturer: ZeissModel: SZP 350Condition: ExcellentItem Location - Country: United Kingdom

Zeiss SZP 350 Chart Projector supplied with a white mounting shelf and in excellent condition.

The SZP 350 Chart Projector provides a vast range of test charts including special charts as well as overlay and masking functions.

Select charts directly or start programmed chart sequences via the infrared remote control.

Olympus UHI-2 Insufflator

Lot # 18996

Manufacturer: OlympusModel: UHI-2Condition: UsedItem Location - Country: United Kingdom

Sold excluding C02 hose. Olympus UHI-2 35Ltr/min hi flow Insufflator with automatic smoke evacuation. Large full panel display for quick status check, 3-step flow rate setting (Hi Med Low) for fast set up, Automatic overpressure release valve, Low pressure central gas supply can be used.

Technical Specification:

PRESSURE RANGE, L/MIN (EXTERNAL GAS CYLINDER) - 3

BACTERIAL FILTER (FLOW OPTIONS, L/MIN) - Yes

DIMENSIONS (HXWXD) CM, (IN) (DISPLAY) - 16.5 x 29.5 x 33.5 (6.5 x 11.6 x 13.2)

WEIGHT, kg (lb) (DISPLAY) - 10(22)

Type (CONFIGURATION) - Electronic

EXTERNAL GAS CYLINDER

Gauge/display (EXTERNAL GAS CYLINDER) - Yes

Low-pressure warning (EXTERNAL GAS CYLINDER) - Yes

FLOW OPTIONS, L/MIN

Range (WAVELENGTH, nm) - 0

Fixed settings (FLOW OPTIONS, L/MIN) - Low (0.5-1.5), medium (1.5-9), high (10-20)

HIGH-PRESSURE SAFEGUARD (EXTERNAL GAS CYLINDER) - Yes

Alert signal - Audible and visual

Activation press, mm hg (EXTERNAL GAS CYLINDER) - Set point + 5

Time delay, sec (BREATH DETECTOR) - 0

Electronic pressure reduction (EXTERNAL GAS CYLINDER) - Yes

Activation press, mm hg (EXTERNAL GAS CYLINDER) - Set point + 5

Time delay, sec (BREATH DETECTOR) - 0

INSUFFLATION VOLUME INDICATOR (FLOW OPTIONS, L/MIN) - Yes

PERITONEAL PRESSURE INDICATOR (EXTERNAL GAS CYLINDER) - Yes

GAS USED (Hinge) - CO2

OTHER SPECIFICATIONS (AIR SUPPLY) - Smoke evacuation capabilities; built- in footswitch.

FDA CLEARANCE (Interference compensation) - Yes

CE MARK (MDD) (Interference compensation) - Yes

Alaris Asena GH MKIII Syringe Driver

Lot # 36657

Manufacturer: Alaris AsenaModel: GH MKIIICondition: UsedItem Location - Country: United Kingdom

Pre-owned Alaris Asena GH MKIII Syringe Driver. Fully functional unit excluding service or calibration (available upon request)

The Alaris ® GH syringe pump is intelligent and highly responsive and delivers drugs in the safest possible way.

It has a large easy to read display, intuitive keyboard, alarm beacon and on-screen drug labelling.

It can be used with the Guardrails ® Suite of safety software providing the power to identify, track and prevent many of the harmful IV medication errors.

Infusion rate: 0.1 - 1200 ml/h (dependent upon syringe)

Features of the Alaris ® GH Syringe Pump:

- Simple to use and operate

- Large graphics format display

- Medical Device Interface (MDI): a unique mounting mechanism

- Event logging records operation of pump

- Advanced communications and nurse call interfaces

- Configurable drug names

- Syringe size/type: 5, 10, 20, 30 or 50 ml disposable syringe of type specified on pump

- Latex free construction

Basic functions:

- Purge function

- Bolus infusion

- Pressure level

- Rate titration

- Clear volume

Rate lock

24 hour log

Set VTBI over time

Alaris ® GH Syringe Pump Specification

Max. infusion rate0.1 - 1200 ml/h

Max. bolus rate10 - 1200 ml/h

Critical volume 0.5 ml with a 50 ml syringe

Purge specifications Max. rate 100 - 500 ml/h

Purge volume range 0.5 - 5 ml

Volume to be infused 0.1 - 100 ml

KVO rate 0.1 - 2.5 ml/h

Accuracy

Battery type: Rechargeable sealed NiMH (charges automatically when connected via AC)

Battery life> 6 hrs from fully charged at 5 ml/h

Battery charge time 2.5 hrs from discharge to 90%

Occlusion settings 11 levels from L0 - L10

AC power requirements 115 - 230 VAC, 50/60 Hz, 20 VA

Weight 2.7 kgs

Dimensions 117h x 310w x 200d mm

Alaris Asena GH MKIII Syringe Driver

Lot # 36674

Manufacturer: Alaris AsenaModel: GH MKIIIItem Location - Country: United Kingdom

Pre-owned Alaris Asena GH MKIII Syringe Driver. Fully functional unit excluding service or calibration (available upon request)

The Alaris ® GH syringe pump is intelligent and highly responsive and delivers drugs in the safest possible way.

It has a large easy to read display, intuitive keyboard, alarm beacon and on-screen drug labelling.

It can be used with the Guardrails ® Suite of safety software providing the power to identify, track and prevent many of the harmful IV medication errors.

Infusion rate: 0.1 - 1200 ml/h (dependent upon syringe)

Features of the Alaris ® GH Syringe Pump:

- Simple to use and operate

- Large graphics format display

- Medical Device Interface (MDI): a unique mounting mechanism

- Event logging records operation of pump

- Advanced communications and nurse call interfaces

- Configurable drug names

- Syringe size/type: 5, 10, 20, 30 or 50 ml disposable syringe of type specified on pump

- Latex free construction

Basic functions:

- Purge function

- Bolus infusion

- Pressure level

- Rate titration

- Clear volume

Rate lock

24 hour log

Set VTBI over time

Alaris ® GH Syringe Pump Specification

Max. infusion rate0.1 - 1200 ml/h

Max. bolus rate10 - 1200 ml/h

Critical volume 0.5 ml with a 50 ml syringe

Purge specifications Max. rate 100 - 500 ml/h

Purge volume range 0.5 - 5 ml

Volume to be infused 0.1 - 100 ml

KVO rate 0.1 - 2.5 ml/h

Accuracy

Battery type: Rechargeable sealed NiMH (charges automatically when connected via AC)

Battery life> 6 hrs from fully charged at 5 ml/h

Battery charge time 2.5 hrs from discharge to 90%

Occlusion settings 11 levels from L0 - L10

AC power requirements 115 - 230 VAC, 50/60 Hz, 20 VA

Weight 2.7 kgs

Dimensions 117h x 310w x 200d mm

Alaris Asena GH MKIII Syringe Driver

Lot # 36689

Manufacturer: Alaris AsenaModel: GH MKIIIItem Location - Country: United Kingdom

Pre-owned Alaris Asena GH MKIII Syringe Driver. Fully functional unit excluding service or calibration (available upon request)

The Alaris ® GH syringe pump is intelligent and highly responsive and delivers drugs in the safest possible way.

It has a large easy to read display, intuitive keyboard, alarm beacon and on-screen drug labelling.

It can be used with the Guardrails ® Suite of safety software providing the power to identify, track and prevent many of the harmful IV medication errors.

Infusion rate: 0.1 - 1200 ml/h (dependent upon syringe)

Features of the Alaris ® GH Syringe Pump:

- Simple to use and operate

- Large graphics format display

- Medical Device Interface (MDI): a unique mounting mechanism

- Event logging records operation of pump

- Advanced communications and nurse call interfaces

- Configurable drug names

- Syringe size/type: 5, 10, 20, 30 or 50 ml disposable syringe of type specified on pump

- Latex free construction

Basic functions:

- Purge function

- Bolus infusion

- Pressure level

- Rate titration

- Clear volume

Rate lock

24 hour log

Set VTBI over time

Alaris ® GH Syringe Pump Specification

Max. infusion rate0.1 - 1200 ml/h

Max. bolus rate10 - 1200 ml/h

Critical volume 0.5 ml with a 50 ml syringe

Purge specifications Max. rate 100 - 500 ml/h

Purge volume range 0.5 - 5 ml

Volume to be infused 0.1 - 100 ml

KVO rate 0.1 - 2.5 ml/h

Accuracy

Battery type: Rechargeable sealed NiMH (charges automatically when connected via AC)

Battery life> 6 hrs from fully charged at 5 ml/h

Battery charge time 2.5 hrs from discharge to 90%

Occlusion settings 11 levels from L0 - L10

AC power requirements 115 - 230 VAC, 50/60 Hz, 20 VA

Weight 2.7 kgs

Dimensions 117h x 310w x 200d mm

Alaris Asena GH MKIII Syringe Driver

Lot # 36691

Manufacturer: Alaris AsenaModel: GH MKIIIItem Location - Country: United Kingdom

Pre-owned Alaris Asena GH MKIII Syringe Driver. Fully functional unit excluding service or calibration (available upon request)

The Alaris ® GH syringe pump is intelligent and highly responsive and delivers drugs in the safest possible way.

It has a large easy to read display, intuitive keyboard, alarm beacon and on-screen drug labelling.

It can be used with the Guardrails ® Suite of safety software providing the power to identify, track and prevent many of the harmful IV medication errors.

Infusion rate: 0.1 - 1200 ml/h (dependent upon syringe)

Features of the Alaris ® GH Syringe Pump:

- Simple to use and operate

- Large graphics format display

- Medical Device Interface (MDI): a unique mounting mechanism

- Event logging records operation of pump

- Advanced communications and nurse call interfaces

- Configurable drug names

- Syringe size/type: 5, 10, 20, 30 or 50 ml disposable syringe of type specified on pump

- Latex free construction

Basic functions:

- Purge function

- Bolus infusion

- Pressure level

- Rate titration

- Clear volume

Rate lock

24 hour log

Set VTBI over time

Alaris ® GH Syringe Pump Specification

Max. infusion rate0.1 - 1200 ml/h

Max. bolus rate10 - 1200 ml/h

Critical volume 0.5 ml with a 50 ml syringe

Purge specifications Max. rate 100 - 500 ml/h

Purge volume range 0.5 - 5 ml

Volume to be infused 0.1 - 100 ml

KVO rate 0.1 - 2.5 ml/h

Accuracy

Battery type: Rechargeable sealed NiMH (charges automatically when connected via AC)

Battery life> 6 hrs from fully charged at 5 ml/h

Battery charge time 2.5 hrs from discharge to 90%

Occlusion settings 11 levels from L0 - L10

AC power requirements 115 - 230 VAC, 50/60 Hz, 20 VA

Weight 2.7 kgs

Dimensions 117h x 310w x 200d mm

Graseby 3200 Syringe Pump

Lot # 107080

Manufacturer: GrasebyModel: 3200Item Location - Country: United Kingdom

The Graseby 3200, from Smiths Medical, gives you control over whichfeatures are made available, allowing faster, simpler control of regularinfusions.

Product Features

-Continuous, Preset Volume, Preset Time and Intermittent Infusion Modes

-Manual (hands-on™) Bolus

-Volume (ml/hr) and Mass Units Infusion Programming

-Accepts and automatically senses the size of syringes from the majormanufactures

-In-line Pressure Sensing and Occlusion Alarm

-Volume Infused Totalizer

-Pump History

-Communications Interface

-AC Powered with backup battery operation

Graseby 500 Infusion Pump

Lot # 107080a

Manufacturer: GrasebyModel: 500Item Location - Country: United Kingdom

Pre-owned Graseby 500 Infusion Pump. Functional unit (servicing and calibration available upon request)

The Graseby Medical 500 Volumetric pump is designed for use in infusion therapy in both venous and arterial infusions. This makes it ideal for use in general care, home care, and intensive/critical care settings.

The unit can be programmed with an infusion rate of up to 999 millilitres per hour, and a maximum volume to be infused of 9999 millilitres.

Just some of the many features of the Graseby 500 are:

- Easy set-up and operation yet with all the advanced features typically associated with the more complicated infusion systems

- Straightforward keypad and an easy-to-read message display

- Unique air-in-line removal system allows clearing of bubbles in the line by simply opening and closing the door

- Potential use as bedside or transportable equipment; using the internal battery which also switches in automatically if the pump is being used on mains power

Graseby 500 Infusion Pump

Lot # 107080b

Manufacturer: GrasebyModel: 500Item Location - Country: United Kingdom

Pre-owned Graseby 500 Infusion Pump. Functional unit (servicing and calibration available upon request)

The unit can be programmed with an infusion rate of up to 999 millilitres per hour, and a maximum volume to be infused of 9999 millilitres.

Just some of the many features of the Graseby 500 are:

- Easy set-up and operation yet with all the advanced features typically associated with the more complicated infusion systems

- Straightforward keypad and an easy-to-read message display

- Unique air-in-line removal system allows clearing of bubbles in the line by simply opening and closing the door

- Potential use as bedside or transportable equipment; using the internal battery which also switches in automatically if the pump is being used on mains power

Graseby 500 Infusion Pump

Lot # 107080c

Manufacturer: GrasebyModel: 500Item Location - Country: United Kingdom

Pre-owned Graseby 500 Infusion Pump. Functional unit (servicing and calibration available upon request)

The unit can be programmed with an infusion rate of up to 999 millilitres per hour, and a maximum volume to be infused of 9999 millilitres.

Just some of the many features of the Graseby 500 are:

- Easy set-up and operation yet with all the advanced features typically associated with the more complicated infusion systems

- Straightforward keypad and an easy-to-read message display

- Unique air-in-line removal system allows clearing of bubbles in the line by simply opening and closing the door

- Potential use as bedside or transportable equipment; using the internal battery which also switches in automatically if the pump is being used on mains power

Graseby 500 Infusion Pump

Lot # 107080d

Manufacturer: GrasebyModel: 500Item Location - Country: United Kingdom

Pre-owned Graseby 500 Infusion Pump. Functional unit (servicing and calibration available upon request)

The unit can be programmed with an infusion rate of up to 999 millilitres per hour, and a maximum volume to be infused of 9999 millilitres.

Just some of the many features of the Graseby 500 are:

- Easy set-up and operation yet with all the advanced features typically associated with the more complicated infusion systems

- Straightforward keypad and an easy-to-read message display

- Unique air-in-line removal system allows clearing of bubbles in the line by simply opening and closing the door

- Potential use as bedside or transportable equipment; using the internal battery which also switches in automatically if the pump is being used on mains power

Graseby 500 Infusion Pump

Lot # 107080e

Manufacturer: GrasebyModel: 500Item Location - Country: United Kingdom

Pre-owned Graseby 500 Infusion Pump. Functional unit (servicing and calibration available upon request)

The unit can be programmed with an infusion rate of up to 999 millilitres per hour, and a maximum volume to be infused of 9999 millilitres.

Just some of the many features of the Graseby 500 are:

- Easy set-up and operation yet with all the advanced features typically associated with the more complicated infusion systems

- Straightforward keypad and an easy-to-read message display

- Unique air-in-line removal system allows clearing of bubbles in the line by simply opening and closing the door

- Potential use as bedside or transportable equipment; using the internal battery which also switches in automatically if the pump is being used on mains power

Search Catalog :

Sort By :

Go to Lot :

Go to Page :

Per Page :

Pg : 1 of 6

1.178.0.771.56c32e2.13.139

Bid Range	Increment
£0.01 - £0.24	£0.01
£0.25 - £0.49	£0.05
£0.50 - £0.99	£0.10
£1.00 - £4.99	£0.25
£5.00 - £9.99	£0.50
£10.00 - £24.99	£1.00
£25.00 - £99.99	£5.00
£100.00 - £249.99	£10.00
£250.00 - £499.99	£25.00
£500.00 - £999.99	£50.00
£1,000.00 - £4,999.99	£100.00
£5,000.00 - £24,999.99	£250.00
£25,000.00 - £49,999.99	£500.00
£50,000.00 - £99,999.99	£1,000.00
£100,000.00 - £249,999.99	£2,500.00
£250,000.00 - £999,999.99	£5,000.00
£1,000,000.00+	£10,000.00

Category

Selling Format

Medical Equipment Auction

Medical Equipment Auction

Eschmann Little Sister Autoclave SES113B Vacuum

Labcaire Autoscope Guardian G2 Endoscope Processor

Arthrex AR-6450 Arthroscopy Pump

Arthrex AR-6450 Arthroscopy Pump

Megadyne Mega Vac Plus Smoke Evacuator

Anetic Aid AET 40050 Electronic Tourniquet

Edwards Lifesciences Aquarius Haemofiltration Machine

Edwards Lifesciences Aquarius Haemofiltration Machine

Edwards Lifesciences Aquarius Haemofiltration Machine

Edwards Lifesciences Aquarius Haemofiltration Machine

Edwards Lifesciences Aquarius Haemofiltration Machine

Edwards Lifesciences Aquarius Haemofiltration Machine

Zeiss SZP 350 Chart Projector

Zeiss SZP 350 Chart Projector

Olympus UHI-2 Insufflator

Alaris Asena GH MKIII Syringe Driver

Alaris Asena GH MKIII Syringe Driver

Alaris Asena GH MKIII Syringe Driver

Alaris Asena GH MKIII Syringe Driver

Graseby 3200 Syringe Pump

Graseby 500 Infusion Pump

Graseby 500 Infusion Pump

Graseby 500 Infusion Pump

Graseby 500 Infusion Pump

Graseby 500 Infusion Pump