Nokomis Machine Shop Accessories & Equipment
Auction closed.
Auction closed.
Nokomis Machine Shop Accessories & Equipment
Auction closed.
Auction closed.
Internet Premium: Tiered
Instant Financing | Low PaymentsSee Special Terms for additional fees
Instant Financing | Low PaymentsSee Special Terms for additional fees
1 Minute Extended Bidding
Description
LARGE MANUFACTURING MACHINES, ACCESSORIES AND EQUIPMENT
OPEN HOUSE: SATURDAY, FEBRUARY 22 FROM 9:00 AM - NOON, & SATURDAY, FEBRUARY 29 FROM NOON-2:00 PM - VIEW THE MACHINES UNDER POWER AT THE OPEN HOUSE!
OPEN HOUSE: SATURDAY, FEBRUARY 22 FROM 9:00 AM - NOON, & SATURDAY, FEBRUARY 29 FROM NOON-2:00 PM - VIEW THE MACHINES UNDER POWER AT THE OPEN HOUSE!
Closed Lots
Open house is Saturday February 22 from 9:00 a.m. until 12:00 noon and February 29 from 12:00 noon
Open house is Saturday February 22 from 9:00 a.m. until 12:00 noon and February 29 from 12:00 noon until 2:00 p.m. View the machines under power!
This excellent line of manufacturing machines and accessories is in well above average condition. SHIPPING: Lots 2-14A, shipping arrangements and cost is the responsibility of the buyer. Proper insurance papers regarding liability and personal property damage must be provided prior to removal. All items to be removed from the premises on or before March 13, 2020. Seller is not responsible for providing any equipment unless agreed upon. Terms: Cash, good check,money order, wire transfer, credit/debit card (3.5% convenience fee. In you are unable to pick up and pay for items on the day provided, payment must be made by wiring the funds. The buyer premium will be on a tier basis, $15,001.00 and up 5% and $15,000.00 and lower 8% apllied to each lot. Best of luck!! Jim Klein
This excellent line of manufacturing machines and accessories is in well above average condition. SHIPPING: Lots 2-14A, shipping arrangements and cost is the responsibility of the buyer. Proper insurance papers regarding liability and personal property damage must be provided prior to removal. All items to be removed from the premises on or before March 13, 2020. Seller is not responsible for providing any equipment unless agreed upon. Terms: Cash, good check,money order, wire transfer, credit/debit card (3.5% convenience fee. In you are unable to pick up and pay for items on the day provided, payment must be made by wiring the funds. The buyer premium will be on a tier basis, $15,001.00 and up 5% and $15,000.00 and lower 8% apllied to each lot. Best of luck!! Jim Klein
Thompson 8x24" Surface Grinder
Thompson Surface Grinder, 2'' x 20'' Wheel, 2' x 1' Magnetic Chuck, 66'' Carriage, Automatic Feed, SN BB11069
Tru-Stone 48" x 72?? Granite Table
Tru-Stone Granite Surface Plate, 3 Key Ways, 72"L x 48"W x 14.5"D, Table ONLY (Note Corner Damage)
OKUMA MX-55VB Vertical Machining Center Sn 10120588
Okuma MX-55VB Vertical Machining Center, Full Enclosure, Transformer, OSP700M Control, User Task II, 20 Random Select Tool Head, Helical Cutting, Sync-Tap, M Code, Spindle Speed 50-6000 rpm, 50 NT Spindle Taper, 6.30-24.02 Spindle Nose to Table, 51.18 x 22.06" Table, 1540 lb Table Weight Capacity, 41.34" X Axis Travel, 22.05 Y Axis Travel, 17.72 Z Axis Travel, Rapid Traverse X&Y 787 ipm and Z 591 ipm, HIgh Speed CAM ATC 1.7 sec T-T, 15/10 hp Spindle Motor, Chip Conveyor, Thru-Spindle Coolant System, @15400 Machine Weight, 3 Phase /220 Volt, Sn 10120588. SEE VIDEO ON PICTURE 2
1990 AMADA H-400 Programable Power Saw w/ Rolling Rack Sn 41602104
1990 Amada H-400 Programmable Power Saw, Work Envelope Cut 17'' Square, 1 1/4'' x 15' Blade, 2 Hydraulic Vices, 3 Phase/220 Volt, 2 Section 16' Rolling Work Rack, @ Ship Wgt 4000 Lbs, Sn 41602104
LeBLOND REGAL Engine Lathe Sn11E-216
LeBLOND Regal Engine Lathe, 196" Swing, 102" Centers & 12" 3 Jaw Chuck, Drill Chuck with Arbor 4 Way Turret Tool Post, Taper Attachment, Dog Plate, Chip Pan coolant system Micrometer Carriage Stop, Sn 11E-216
OKUMA LB35II SN 595
Okuma LB35 II CNC Lathe, OSP7000L-G Control, Color Crt, 15" Hydraulic Chuck, Lap 4, User Task II, 27.56 Swing over Bed, 17.72 Max Turn Diameter, 33.36 Center to Center Distance, 3.54" Spindle Bore, 3.15 Thru-Chuck, 14-3200 Spindle Speed, 12 Station Vertical Turret, Rapid Traverse X Axis 591 ipm / Z Axis 787 ipm.40/30 hp Motor, Henning KMO 0544 Chip Conveyor, HIgh Pressure Coolant System, Auto Door w/ Interlock, @ Ship Wgt 20900 Lbs Sn. SEE VIDEO ON PICTURE 2
Shipping: From lot numbers 15 through 177 there are some items that we are unable to ship and will
Shipping: From lot numbers 15 through 177 there are some items that we are unable to ship and will state "no shipping". Other items stated "shipping" can and will be shipped by a professional boxing and shipping company with all expenses including a handling fee to be paid by the buyer. Some of these items will be rather heavy, so please be considerate of the charges applied. If you have any questions please contact Jim at 712-540-1206. Refer to Lot 1 regarding the buyer premium per lot.
Dumore Tool Post Grinder
Dumore Tool Post Grinder in Metal Box w/Attachments (Motor works but inline switch does not work)
Bison 8" Self Centering Precision Vice (New)
Bison 8" Self Centering Precision Vice (New) No Shipping
Bur-Beaver Deburring & Beveling Machine
Bur-Beaver Deburring & Beveling Machine. No Shipping
Gisholt Turret Metal Lathe
Gisholt Turret Metal Lathe, 8' Bed, 15'' Chuck, 4'' Thru-Hole, 3 Phase. Owner: Geoff 712-332-4195
Clark C500-40, 4000 Lb Forklift
Clark C500-40, 4000 Lb Forklift, Solid Tires, Gas Liquid Engine, LH Shuttle Transmission, Lift and Tilt Mast, Manual Adjust Forks, Rops-Fops Structure, Sn 355-1718-2541 - Brakes need repair
Vertex 3 Jaw Indexing Chuck w/Veneering
Vertex 3 Jaw Indexing Chuck w/Veneering. No Shipping