FISCHER AUCTION CO. INC. - Repo, Bankruptcy & Industrial Auction Center » RV Interiors- ONLINE ONLY !!
RV Interiors- ONLINE ONLY !!
Auction closed.
Auction closed.
RV Interiors- ONLINE ONLY !!
Auction closed.
Auction closed.
Internet Premium: 15%
See Special Terms for additional fees
Cash Payment Discount: 3%
See Special Terms for additional fees
Cash Payment Discount: 3%
Description
Online auction of the assets of RV Interiors.
Closed Lots
Felder K 700S Sliding Table Saw
Model #K700S. 5.5 HP (4.0 kW). Sliding table saw with tilting saw blade (90...?45...), maximum cutting height 104 mm with a 315 mm saw blade, 4800 rpm. 800 mm rip capacity with full table length, min. transport width 1000 mm. Saw guard EURO II. Dimension sliding table F, cutting length 2500 mm(98"), anodized** with edging shoe. 1300 mm Outrigger table for 1300?2500 mm sliding tables. Crosscut fence 2600 mm for outrigger table (#159/160) Working height in mm 890. ***UNIT ONLY, DOES NOT INCLUDE WOOD UTILITY TABLE/TOOLS/SURROUNDING ITEMS.***
Laguna Tools Swift CNC Machine w/ Vacuum | Professional CNC Router | Laguna CNC
Swift 4x4 CNC Router with Vacuum The Laguna Swift Vacuum CNC Router features a work envelope of 48?? x 48?? and includes an industrial-grade liquid cooled electrospindle. The Swift vacuum features a 6-zone vacuum phenolic table. 1Ph 220v /30 amp 3HP Liquid cooled electro spindle (ER-20 Collet) 6,000 ? 24,000 RPM Spindle 4-Zone Vacuum Table HHC Controller Gantry Height: 6 inches T-Slot Table Complete Ball Screw on Z Axis Double helical rack drive on X and Y axis Machine Foot Print: 73??L x 79?? W Useable Table: 48??x 48??. ***INCLUDES BIN OF EXTRA SPRING COLLETS***
Felder P100 Edgebander
Model #P100. 220v, 60Hz, Single phase available thru a phase converter. Hot Air Edgebander Up to 1mm pre-glued tape, up to 45mm, 5m/min fan speed, 220@1ph Shortest part length: 6" Features: top bottom and end trim guide extension for wide panels.
Assorted Lot of Veneer Edging Material, Laminate, Wood Glue/Filler Etc.
***SHELVING CONTENTS ONLY, DOES NOT INCLUDE SHELVES. PLEASE PERFORM OWN INSPECTION FOR FURTHER DETAILS.***
Woodstock International Shop Fox W1678 26in. Double Drum Sander
Sanding motor: 5 HP, 220V, single-phase, 3450 RPM, 25A Conveyor motor: 1/3 HP, 60V DC, 2A Drum surface speed: 2300 FPM Max. stock dimensions: 26"W x 4-1/4"H Feed rates: variable (0?20 FPM) Conveyor table size: 26-1/8" x 30-1/4" Dual drum with hook & loop sandpaper attachment Powder-coated finish All ball-bearing construction Min. board length: 9" Min. board thickness: 1/8" Sanding drums: two 6" x 27-3/4", aluminum Dust ports: (2) 4" Micro-adjustable rear drum Approximate shipping weight: 546 lbs.
Face Frame Assembly Table AT-Race 4?x 5' w/Sioux Driver
Table SKU #A00045. 330lbs. Serial #62103. Face Frame Assembly Table clamping arm glides smoothly on an open beam that allows face frames to extend beyond the top of the table. The redesigned quick-clamps feature dual handles and centered activation for easy clamping from either direction. The rigid steel arm constructed out of Unistrut stands up to years of use, while the Open Back table gives you more work area and can handle oversize frames without taking up valuable shop space. Professional woodworking assembly table, Redesigned quick-clamps, Unistrut rigid steel arm, Foot Print 60?? x 43?? x 79??H. Driver Model #2P2607. Serial #MPFB. 2000RPM.
Woodtek Adjustable Center Dual Spindal Horizontal Boring Machine
Model #BM-301. 2hp, 110v, 1-Phase, 60hz. ***PLEASE PERFORM OWN INSPECTION FOR FURTHER DETAILS.***
Conquest Mini 13 Spindle Line Boring Machine
Model #B0111. Serial #1110378. MADE IN USA, 2 flip stops, 30?? fence capacity. (optional 30?? extensions), 2 spring loaded index pins. 13 spindle boring head with heat treated steel helical gears. 32-millimeter centers, distance between first and last drill = 15??, TEFC Baldor motor, 3,450rpm, 3/4hp (US HP Rating) ? 115 volts (9.6 amps) 60Hz Single Phase. Accepts 10-millimeter shank bits with one flat side, 6 lefts and 7 rights. Machine weight (approx.) 132 lbs.
Kreg DK1100TP - 1-Spindle Table Pneumatic Pocket Hole Machine and Work Bench
***UNIT IS BUILT INTO WORKBENCH AND IS INCLUDED. APPROXIMATE DIMENSIONS 5?L x 2?W x 3?H*** The DK1100 TP is a benchtop, entirely pneumatic powered, fully-automatic pocket hole boring machine. The only difference from the FP model is that it is contained in a short, benchtop cabinet that allows it to be built into a workbench or transported from your shop to the worksite. 110-120 psi is recommended to power the direct drive air motor, hold-down clamp, and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to seat flushly in the bottom of the pocket and the hole to be plugged with wooden dowel. This machine is built to be extremely quiet for operator comfort and the simple design results in very fast drill bit changes. Shipping weight is approximately 82 lb.
Jet Equipment and Tools Oscillating Spindle Sander
Model No:JOVS-10, Motor: 1 HP 1PH 115V Only, Stock No: 708411, Serial No: 9110704
Grizzly G0442 - 5 HP Cyclone Dust Collector
Model #G0442. Cyclonic action separates the heavy dust particles from the fine particles and drops them into the 55-gallon steel drum. The fine dust travels past the 16" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size. The cartridge filter is pleated to provide 226 square feet of surface area for efficient air movement and a clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance. Casters mounted to the drum also make disposal of the larger chips and dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11 gauge steel blower housing, 14 gauge steel cyclone body, 360 degree blower rotation for easy connection to a duct system, TEFC Class "F" motor, filter cleaning devise for optimum performance and a magnetic switch with remote control. A rugged steel stand is included. Motor: 5HP, 220V, single-phase, 3450 RPM, 60 Hz, 22.4A, TEFC, Class "F", Switch: Remote controlled magnetic, Intake hole size: 10" with 8" adapter, Bag material: Plastic, Impeller: 16" steel radial fin, Air suction capacity: 2184 CFM @ 1.9" SP, Maximum static pressure: 14.0", Filter: 99.9% efficiency captures 0.2?2 micron dust particles, Filter surface area: 226 sq. ft., Collection drum: Steel, 55 gallons, Sound rating: 83-86 dB, Overall dimensions: 63" W x 111-1/2" H x 56-7/8" D, Approximate shipping weight: 632 lbs. ***PLEASE PERFORM OWN INSPECTION FOR FURTHER DETAILS.***
JET Equipment and Tools Dust Collector
Model No: DC-1900, Stock No: 708623, Motor: 3 HP, 1 Ph 230V Only, Serial No: 60106936
JDS Air Tech 2000 High Efficiency Air Filtration System
***Model No. 750E***AC 120V. 60Hz 3.9 AMPS***Serial No. 688130107***
JDS Air Tech 2000 High Efficiency Air Filtration System
***Model No. 750E***AC 120V. 60Hz 3.9 AMPS
General Machinery Dust Collector
***70 Gallon,***Motor: 2 HP, 20 AMPS Peak, Single Phase, 60 Hz, 110 Volts***RPM?s: 3450***Power Cord: 5-.5 feet 16AWG x 3C Gauge***Model # 45378
Quincy QT-54 Splash Lubricated Reciprocating Air Compressor
5 HP, 230 Volt, 1 Phase, 60-Gallon Vertical, Model No. QT54VT00009, Serial No. 20070828 0005
Powermatic 1791210 Model 15S Deluxe 15-Inch 3-Horsepower 230-Volt 1-Phase Planer with Spiral
13,500 Cuts per minute Spiral cutterhead Digital readout 3-Horsepower (TEFC) motor Kit includes planer, dust hood, handwheel, handle, knife adjustment tool, two extension tables, seven wrenches, three bags of fasteners, owner's manual and warranty card
Clark Sitdown Counter Balanced Gas Powered Forklift
***FORKLIFT CANNOT BE PICKED UP UNTIL FRIDAY FEBRUARY 9th****3 cylinder gasoline engine. 2 Stage Mast. Hour meter reads 631 hours. Starts and Runs, has Solid Rubber Tires. ***BATTERY NEEDS TO BE REPLACED, LOT DOES NOT INCLUDE BATTERY CHARGER.***
Standing Heavy Duty Drill Press 12 Speed
***Model: FLAG12-IND***HP:3/4***Serial No. 041859***Manufacture date 1979***
Blum Minidrill Press P Standard Boring Machine with Single Phase 220V
Vertical drilling and component insertion Drilling distance settings using spindle Pneumatic feed Model No. 2005
Blum Minidrill P Standard Boring Machine with Single Phase Power 220V
BLUM "MINIDRILL" Boring (Hinge) Machine, as pictured: Tabletop "MINI DRILL" unit for BLUM Hinge Boring; 1.1 KW - 2,450 RPM drill head assembly for hinge cup boring. Head assembly rotates for several hinge and drawer system boring patterns; pneumatic drill cycle with air blowoff. Includes: 24" x 12" Tabletop with (2) flip-stops.